| 1 |
/* |
| 2 |
* Hitex LPC4350 Evaluation Board |
| 3 |
* |
| 4 |
* Copyright 2015 Ariel D'Alessandro <[email protected]> |
| 5 |
* |
| 6 |
* This code is released using a dual license strategy: BSD/GPL |
| 7 |
* You can choose the licence that better fits your requirements. |
| 8 |
* |
| 9 |
* Released under the terms of 3-clause BSD License |
| 10 |
* Released under the terms of GNU General Public License Version 2.0 |
| 11 |
* |
| 12 |
*/ |
| 13 |
/dts-v1/; |
| 14 |
|
| 15 |
#include "lpc18xx.dtsi" |
| 16 |
#include "lpc4350.dtsi" |
| 17 |
|
| 18 |
#include "dt-bindings/input/input.h" |
| 19 |
#include "dt-bindings/gpio/gpio.h" |
| 20 |
|
| 21 |
/ { |
| 22 |
model = "Hitex LPC4350 Evaluation Board"; |
| 23 |
compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; |
| 24 |
|
| 25 |
aliases { |
| 26 |
serial0 = &uart0; |
| 27 |
serial1 = &uart1; |
| 28 |
serial2 = &uart2; |
| 29 |
serial3 = &uart3; |
| 30 |
}; |
| 31 |
|
| 32 |
chosen { |
| 33 |
stdout-path = &uart0; |
| 34 |
}; |
| 35 |
|
| 36 |
memory@28000000 { |
| 37 |
device_type = "memory"; |
| 38 |
reg = <0x28000000 0x800000>; /* 8 MB */ |
| 39 |
}; |
| 40 |
|
| 41 |
pca_buttons { |
| 42 |
compatible = "gpio-keys-polled"; |
| 43 |
poll-interval = <100>; |
| 44 |
autorepeat; |
| 45 |
|
| 46 |
button-0 { |
| 47 |
label = "joy:right"; |
| 48 |
linux,code = <KEY_RIGHT>; |
| 49 |
gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; |
| 50 |
}; |
| 51 |
|
| 52 |
button-1 { |
| 53 |
label = "joy:up"; |
| 54 |
linux,code = <KEY_UP>; |
| 55 |
gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; |
| 56 |
}; |
| 57 |
|
| 58 |
|
| 59 |
button-2 { |
| 60 |
label = "joy:enter"; |
| 61 |
linux,code = <KEY_ENTER>; |
| 62 |
gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; |
| 63 |
}; |
| 64 |
|
| 65 |
button-3 { |
| 66 |
label = "joy:left"; |
| 67 |
linux,code = <KEY_LEFT>; |
| 68 |
gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; |
| 69 |
}; |
| 70 |
|
| 71 |
button-4 { |
| 72 |
label = "joy:down"; |
| 73 |
linux,code = <KEY_DOWN>; |
| 74 |
gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; |
| 75 |
}; |
| 76 |
|
| 77 |
button-5 { |
| 78 |
label = "user:sw3"; |
| 79 |
linux,code = <KEY_F1>; |
| 80 |
gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; |
| 81 |
}; |
| 82 |
|
| 83 |
button-6 { |
| 84 |
label = "user:sw4"; |
| 85 |
linux,code = <KEY_F2>; |
| 86 |
gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; |
| 87 |
}; |
| 88 |
|
| 89 |
button-7 { |
| 90 |
label = "user:sw5"; |
| 91 |
linux,code = <KEY_F3>; |
| 92 |
gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; |
| 93 |
}; |
| 94 |
}; |
| 95 |
|
| 96 |
pca_leds { |
| 97 |
compatible = "gpio-leds"; |
| 98 |
|
| 99 |
led0 { |
| 100 |
label = "ext:led0"; |
| 101 |
gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>; |
| 102 |
linux,default-trigger = "heartbeat"; |
| 103 |
}; |
| 104 |
|
| 105 |
led1 { |
| 106 |
label = "ext:led1"; |
| 107 |
gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>; |
| 108 |
}; |
| 109 |
|
| 110 |
led2 { |
| 111 |
label = "ext:led2"; |
| 112 |
gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>; |
| 113 |
}; |
| 114 |
|
| 115 |
led3 { |
| 116 |
label = "ext:led3"; |
| 117 |
gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
vcc: vcc_fixed { |
| 122 |
compatible = "regulator-fixed"; |
| 123 |
regulator-name = "3v3io"; |
| 124 |
regulator-min-microvolt = <3300000>; |
| 125 |
regulator-max-microvolt = <3300000>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
&pinctrl { |
| 130 |
adc1_pins: adc1-pins { |
| 131 |
adc1_pins_cfg { |
| 132 |
pins = "pf_9"; |
| 133 |
function = "adc"; |
| 134 |
input-disable; |
| 135 |
bias-disable; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
emc_pins: emc-pins { |
| 140 |
emc_addr0_23_cfg { |
| 141 |
pins = "p2_9", "p2_10", "p2_11", "p2_12", |
| 142 |
"p2_13", "p1_0", "p1_1", "p1_2", |
| 143 |
"p2_8", "p2_7", "p2_6", "p2_2", |
| 144 |
"p2_1", "p2_0", "p6_8", "p6_7", |
| 145 |
"pd_16", "pd_15", "pe_0", "pe_1", |
| 146 |
"pe_2", "pe_3", "pe_4", "pa_4"; |
| 147 |
function = "emc"; |
| 148 |
slew-rate = <1>; |
| 149 |
bias-disable; |
| 150 |
input-enable; |
| 151 |
input-schmitt-disable; |
| 152 |
}; |
| 153 |
|
| 154 |
emc_data0_15_cfg { |
| 155 |
pins = "p1_7", "p1_8", "p1_9", "p1_10", |
| 156 |
"p1_11", "p1_12", "p1_13", "p1_14", |
| 157 |
"p5_4", "p5_5", "p5_6", "p5_7", |
| 158 |
"p5_0", "p5_1", "p5_2", "p5_3"; |
| 159 |
function = "emc"; |
| 160 |
slew-rate = <1>; |
| 161 |
bias-disable; |
| 162 |
input-enable; |
| 163 |
input-schmitt-disable; |
| 164 |
}; |
| 165 |
|
| 166 |
emc_we_oe_cfg { |
| 167 |
pins = "p1_6", "p1_3"; |
| 168 |
function = "emc"; |
| 169 |
slew-rate = <1>; |
| 170 |
bias-disable; |
| 171 |
input-enable; |
| 172 |
input-schmitt-disable; |
| 173 |
}; |
| 174 |
|
| 175 |
emc_bls0_3_cfg { |
| 176 |
pins = "p1_4", "p6_6", "pd_13", "pd_10"; |
| 177 |
function = "emc"; |
| 178 |
slew-rate = <1>; |
| 179 |
bias-disable; |
| 180 |
input-enable; |
| 181 |
input-schmitt-disable; |
| 182 |
}; |
| 183 |
|
| 184 |
emc_cs0_cs2_cfg { |
| 185 |
pins = "p1_5", "pd_12"; |
| 186 |
function = "emc"; |
| 187 |
slew-rate = <1>; |
| 188 |
bias-disable; |
| 189 |
input-enable; |
| 190 |
input-schmitt-disable; |
| 191 |
}; |
| 192 |
|
| 193 |
emc_sdram_dqm0_3_cfg { |
| 194 |
pins = "p6_12", "p6_10", "pd_0", "pe_13"; |
| 195 |
function = "emc"; |
| 196 |
slew-rate = <1>; |
| 197 |
bias-disable; |
| 198 |
input-enable; |
| 199 |
input-schmitt-disable; |
| 200 |
}; |
| 201 |
|
| 202 |
emc_sdram_ras_cas_cfg { |
| 203 |
pins = "p6_5", "p6_4"; |
| 204 |
function = "emc"; |
| 205 |
slew-rate = <1>; |
| 206 |
bias-disable; |
| 207 |
input-enable; |
| 208 |
input-schmitt-disable; |
| 209 |
}; |
| 210 |
|
| 211 |
emc_sdram_dycs0_cfg { |
| 212 |
pins = "p6_9"; |
| 213 |
function = "emc"; |
| 214 |
slew-rate = <1>; |
| 215 |
bias-disable; |
| 216 |
input-enable; |
| 217 |
input-schmitt-disable; |
| 218 |
}; |
| 219 |
|
| 220 |
emc_sdram_cke_cfg { |
| 221 |
pins = "p6_11"; |
| 222 |
function = "emc"; |
| 223 |
slew-rate = <1>; |
| 224 |
bias-disable; |
| 225 |
input-enable; |
| 226 |
input-schmitt-disable; |
| 227 |
}; |
| 228 |
|
| 229 |
emc_sdram_clock_cfg { |
| 230 |
pins = "clk0", "clk1", "clk2", "clk3"; |
| 231 |
function = "emc"; |
| 232 |
slew-rate = <1>; |
| 233 |
bias-disable; |
| 234 |
input-enable; |
| 235 |
input-schmitt-disable; |
| 236 |
}; |
| 237 |
}; |
| 238 |
|
| 239 |
enet_mii_pins: enet-mii-pins { |
| 240 |
enet_mii_rxd0_3_cfg { |
| 241 |
pins = "p1_15", "p0_0", "p9_3", "p9_2"; |
| 242 |
function = "enet"; |
| 243 |
bias-disable; |
| 244 |
input-enable; |
| 245 |
}; |
| 246 |
|
| 247 |
enet_mii_txd0_3_cfg { |
| 248 |
pins = "p1_18", "p1_20", "p9_4", "p9_5"; |
| 249 |
function = "enet"; |
| 250 |
bias-disable; |
| 251 |
}; |
| 252 |
|
| 253 |
enet_mii_crs_col_cfg { |
| 254 |
pins = "p9_0", "p9_6"; |
| 255 |
function = "enet"; |
| 256 |
bias-disable; |
| 257 |
input-enable; |
| 258 |
}; |
| 259 |
|
| 260 |
enet_mii_rx_clk_dv_er_cfg { |
| 261 |
pins = "pc_0", "p1_16", "p9_1"; |
| 262 |
function = "enet"; |
| 263 |
bias-disable; |
| 264 |
input-enable; |
| 265 |
}; |
| 266 |
|
| 267 |
enet_mii_tx_clk_en_cfg { |
| 268 |
pins = "p1_19", "p0_1"; |
| 269 |
function = "enet"; |
| 270 |
bias-disable; |
| 271 |
input-enable; |
| 272 |
}; |
| 273 |
|
| 274 |
enet_mdio_cfg { |
| 275 |
pins = "p1_17"; |
| 276 |
function = "enet"; |
| 277 |
bias-disable; |
| 278 |
input-enable; |
| 279 |
}; |
| 280 |
|
| 281 |
enet_mdc_cfg { |
| 282 |
pins = "pc_1"; |
| 283 |
function = "enet"; |
| 284 |
bias-disable; |
| 285 |
}; |
| 286 |
}; |
| 287 |
|
| 288 |
i2c0_pins: i2c0-pins { |
| 289 |
i2c0_pins_cfg { |
| 290 |
pins = "i2c0_scl", "i2c0_sda"; |
| 291 |
function = "i2c0"; |
| 292 |
input-enable; |
| 293 |
}; |
| 294 |
}; |
| 295 |
|
| 296 |
spifi_pins: spifi-pins { |
| 297 |
spifi_clk_cfg { |
| 298 |
pins = "p3_3"; |
| 299 |
function = "spifi"; |
| 300 |
slew-rate = <1>; |
| 301 |
bias-disable; |
| 302 |
input-enable; |
| 303 |
input-schmitt-disable; |
| 304 |
}; |
| 305 |
|
| 306 |
spifi_mosi_miso_sio2_3_cfg { |
| 307 |
pins = "p3_7", "p3_6", "p3_5", "p3_4"; |
| 308 |
function = "spifi"; |
| 309 |
slew-rate = <1>; |
| 310 |
bias-disable; |
| 311 |
input-enable; |
| 312 |
input-schmitt-disable; |
| 313 |
}; |
| 314 |
|
| 315 |
spifi_cs_cfg { |
| 316 |
pins = "p3_8"; |
| 317 |
function = "spifi"; |
| 318 |
slew-rate = <1>; |
| 319 |
bias-disable; |
| 320 |
input-enable; |
| 321 |
input-schmitt-disable; |
| 322 |
}; |
| 323 |
}; |
| 324 |
|
| 325 |
uart0_pins: uart0-pins { |
| 326 |
uart0_rx_cfg { |
| 327 |
pins = "pf_11"; |
| 328 |
function = "uart0"; |
| 329 |
input-schmitt-disable; |
| 330 |
bias-disable; |
| 331 |
input-enable; |
| 332 |
}; |
| 333 |
|
| 334 |
uart0_tx_cfg { |
| 335 |
pins = "pf_10"; |
| 336 |
function = "uart0"; |
| 337 |
bias-pull-down; |
| 338 |
}; |
| 339 |
}; |
| 340 |
}; |
| 341 |
|
| 342 |
&adc1 { |
| 343 |
status = "okay"; |
| 344 |
vref-supply = <&vcc>; |
| 345 |
pinctrl-names = "default"; |
| 346 |
pinctrl-0 = <&adc1_pins>; |
| 347 |
}; |
| 348 |
|
| 349 |
&emc { |
| 350 |
status = "okay"; |
| 351 |
pinctrl-names = "default"; |
| 352 |
pinctrl-0 = <&emc_pins>; |
| 353 |
|
| 354 |
cs0 { |
| 355 |
#address-cells = <2>; |
| 356 |
#size-cells = <1>; |
| 357 |
ranges; |
| 358 |
|
| 359 |
mpmc,cs = <0>; |
| 360 |
mpmc,memory-width = <16>; |
| 361 |
mpmc,byte-lane-low; |
| 362 |
mpmc,write-enable-delay = <0>; |
| 363 |
mpmc,output-enable-delay = <0>; |
| 364 |
mpmc,read-access-delay = <70>; |
| 365 |
mpmc,page-mode-read-delay = <70>; |
| 366 |
|
| 367 |
flash@0,0 { |
| 368 |
compatible = "sst,sst39vf320", "cfi-flash"; |
| 369 |
reg = <0 0 0x400000>; |
| 370 |
bank-width = <2>; |
| 371 |
#address-cells = <1>; |
| 372 |
#size-cells = <1>; |
| 373 |
|
| 374 |
partition@0 { |
| 375 |
label = "bootloader"; |
| 376 |
reg = <0x000000 0x040000>; /* 256 KiB */ |
| 377 |
}; |
| 378 |
|
| 379 |
partition@1 { |
| 380 |
label = "kernel"; |
| 381 |
reg = <0x040000 0x2C0000>; /* 2.75 MiB */ |
| 382 |
}; |
| 383 |
|
| 384 |
partition@2 { |
| 385 |
label = "rootfs"; |
| 386 |
reg = <0x300000 0x100000>; /* 1 MiB */ |
| 387 |
}; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
cs2 { |
| 392 |
#address-cells = <2>; |
| 393 |
#size-cells = <1>; |
| 394 |
ranges; |
| 395 |
|
| 396 |
mpmc,cs = <2>; |
| 397 |
mpmc,memory-width = <16>; |
| 398 |
mpmc,byte-lane-low; |
| 399 |
mpmc,write-enable-delay = <0>; |
| 400 |
mpmc,output-enable-delay = <30>; |
| 401 |
mpmc,read-access-delay = <90>; |
| 402 |
mpmc,page-mode-read-delay = <55>; |
| 403 |
mpmc,write-access-delay = <55>; |
| 404 |
mpmc,turn-round-delay = <55>; |
| 405 |
|
| 406 |
ext_sram: sram@2,0 { |
| 407 |
compatible = "mmio-sram"; |
| 408 |
reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */ |
| 409 |
#address-cells = <1>; |
| 410 |
#size-cells = <1>; |
| 411 |
ranges = <0 2 0 0x80000>; |
| 412 |
}; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
&enet_tx_clk { |
| 417 |
clock-frequency = <25000000>; |
| 418 |
}; |
| 419 |
|
| 420 |
&i2c0 { |
| 421 |
status = "okay"; |
| 422 |
pinctrl-names = "default"; |
| 423 |
pinctrl-0 = <&i2c0_pins>; |
| 424 |
clock-frequency = <400000>; |
| 425 |
|
| 426 |
/* NXP SE97BTP with temperature sensor + eeprom */ |
| 427 |
sensor@18 { |
| 428 |
compatible = "nxp,se97", "jedec,jc-42.4-temp"; |
| 429 |
reg = <0x18>; |
| 430 |
}; |
| 431 |
|
| 432 |
eeprom@50 { |
| 433 |
compatible = "nxp,24c02", "atmel,24c02"; |
| 434 |
reg = <0x50>; |
| 435 |
}; |
| 436 |
|
| 437 |
pca_gpio: gpio@24 { |
| 438 |
compatible = "nxp,pca9673"; |
| 439 |
reg = <0x24>; |
| 440 |
gpio-controller; |
| 441 |
#gpio-cells = <2>; |
| 442 |
}; |
| 443 |
}; |
| 444 |
|
| 445 |
&mac { |
| 446 |
status = "okay"; |
| 447 |
phy-mode = "mii"; |
| 448 |
pinctrl-names = "default"; |
| 449 |
pinctrl-0 = <&enet_mii_pins>; |
| 450 |
}; |
| 451 |
|
| 452 |
&spifi { |
| 453 |
status = "okay"; |
| 454 |
pinctrl-names = "default"; |
| 455 |
pinctrl-0 = <&spifi_pins>; |
| 456 |
|
| 457 |
flash@0 { |
| 458 |
compatible = "jedec,spi-nor"; |
| 459 |
reg = <0>; |
| 460 |
spi-rx-bus-width = <4>; |
| 461 |
#address-cells = <1>; |
| 462 |
#size-cells = <1>; |
| 463 |
|
| 464 |
partition@0 { |
| 465 |
label = "bootloader"; |
| 466 |
reg = <0x000000 0x040000>; /* 256 KiB */ |
| 467 |
}; |
| 468 |
|
| 469 |
partition@1 { |
| 470 |
label = "kernel"; |
| 471 |
reg = <0x040000 0x2c0000>; /* 2.75 MiB */ |
| 472 |
}; |
| 473 |
|
| 474 |
partition@2 { |
| 475 |
label = "rootfs"; |
| 476 |
reg = <0x300000 0x500000>; /* 5 MiB */ |
| 477 |
}; |
| 478 |
}; |
| 479 |
}; |
| 480 |
|
| 481 |
&uart0 { |
| 482 |
status = "okay"; |
| 483 |
pinctrl-names = "default"; |
| 484 |
pinctrl-0 = <&uart0_pins>; |
| 485 |
}; |