| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 MediaTek Inc. |
| 4 |
* Author: Ryder Lee <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include "mt7629.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "MediaTek MT7629 reference board"; |
| 13 |
compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
serial0 = &uart0; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial0:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
gpio-keys { |
| 24 |
compatible = "gpio-keys"; |
| 25 |
|
| 26 |
button-reset { |
| 27 |
label = "factory"; |
| 28 |
linux,code = <KEY_RESTART>; |
| 29 |
gpios = <&pio 60 GPIO_ACTIVE_LOW>; |
| 30 |
}; |
| 31 |
|
| 32 |
button-wps { |
| 33 |
label = "wps"; |
| 34 |
linux,code = <KEY_WPS_BUTTON>; |
| 35 |
gpios = <&pio 58 GPIO_ACTIVE_LOW>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
memory@40000000 { |
| 40 |
device_type = "memory"; |
| 41 |
reg = <0x40000000 0x10000000>; |
| 42 |
}; |
| 43 |
|
| 44 |
reg_3p3v: regulator-3p3v { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
regulator-name = "fixed-3.3V"; |
| 47 |
regulator-min-microvolt = <3300000>; |
| 48 |
regulator-max-microvolt = <3300000>; |
| 49 |
regulator-boot-on; |
| 50 |
regulator-always-on; |
| 51 |
}; |
| 52 |
|
| 53 |
reg_5v: regulator-5v { |
| 54 |
compatible = "regulator-fixed"; |
| 55 |
regulator-name = "fixed-5V"; |
| 56 |
regulator-min-microvolt = <5000000>; |
| 57 |
regulator-max-microvolt = <5000000>; |
| 58 |
regulator-boot-on; |
| 59 |
regulator-always-on; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
ð { |
| 64 |
pinctrl-names = "default"; |
| 65 |
pinctrl-0 = <ð_pins>; |
| 66 |
pinctrl-1 = <&ephy_leds_pins>; |
| 67 |
status = "okay"; |
| 68 |
|
| 69 |
gmac0: mac@0 { |
| 70 |
compatible = "mediatek,eth-mac"; |
| 71 |
reg = <0>; |
| 72 |
phy-mode = "2500base-x"; |
| 73 |
fixed-link { |
| 74 |
speed = <2500>; |
| 75 |
full-duplex; |
| 76 |
pause; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
gmac1: mac@1 { |
| 81 |
compatible = "mediatek,eth-mac"; |
| 82 |
reg = <1>; |
| 83 |
phy-mode = "gmii"; |
| 84 |
phy-handle = <&phy0>; |
| 85 |
}; |
| 86 |
|
| 87 |
mdio: mdio-bus { |
| 88 |
#address-cells = <1>; |
| 89 |
#size-cells = <0>; |
| 90 |
|
| 91 |
phy0: ethernet-phy@0 { |
| 92 |
reg = <0>; |
| 93 |
}; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&i2c { |
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&i2c_pins>; |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&qspi { |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <&qspi_pins>; |
| 106 |
status = "okay"; |
| 107 |
|
| 108 |
flash@0 { |
| 109 |
compatible = "jedec,spi-nor"; |
| 110 |
reg = <0>; |
| 111 |
|
| 112 |
partitions { |
| 113 |
compatible = "fixed-partitions"; |
| 114 |
#address-cells = <1>; |
| 115 |
#size-cells = <1>; |
| 116 |
|
| 117 |
partition@0 { |
| 118 |
label = "u-boot"; |
| 119 |
reg = <0x00000 0x60000>; |
| 120 |
read-only; |
| 121 |
}; |
| 122 |
|
| 123 |
partition@60000 { |
| 124 |
label = "u-boot-env"; |
| 125 |
reg = <0x60000 0x10000>; |
| 126 |
read-only; |
| 127 |
}; |
| 128 |
|
| 129 |
factory: partition@70000 { |
| 130 |
label = "factory"; |
| 131 |
reg = <0x70000 0x40000>; |
| 132 |
read-only; |
| 133 |
}; |
| 134 |
|
| 135 |
partition@b0000 { |
| 136 |
label = "kernel"; |
| 137 |
reg = <0xb0000 0xb50000>; |
| 138 |
}; |
| 139 |
}; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
&pcie1 { |
| 144 |
pinctrl-names = "default"; |
| 145 |
pinctrl-0 = <&pcie_pins>; |
| 146 |
status = "okay"; |
| 147 |
}; |
| 148 |
|
| 149 |
&pciephy1 { |
| 150 |
status = "okay"; |
| 151 |
}; |
| 152 |
|
| 153 |
&pio { |
| 154 |
eth_pins: eth-pins { |
| 155 |
mux { |
| 156 |
function = "eth"; |
| 157 |
groups = "mdc_mdio"; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
ephy_leds_pins: ephy-leds-pins { |
| 162 |
mux { |
| 163 |
function = "led"; |
| 164 |
groups = "gphy_leds_0", "ephy_leds"; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
i2c_pins: i2c-pins { |
| 169 |
mux { |
| 170 |
function = "i2c"; |
| 171 |
groups = "i2c_0"; |
| 172 |
}; |
| 173 |
|
| 174 |
conf { |
| 175 |
pins = "I2C_SDA", "I2C_SCL"; |
| 176 |
drive-strength = <4>; |
| 177 |
bias-disable; |
| 178 |
}; |
| 179 |
}; |
| 180 |
|
| 181 |
pcie_pins: pcie-pins { |
| 182 |
mux { |
| 183 |
function = "pcie"; |
| 184 |
groups = "pcie_clkreq", |
| 185 |
"pcie_pereset", |
| 186 |
"pcie_wake"; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
pwm_pins: pwm-pins { |
| 191 |
mux { |
| 192 |
function = "pwm"; |
| 193 |
groups = "pwm_0"; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
/* SPI-NOR is shared pin with serial NAND */ |
| 198 |
qspi_pins: qspi-pins { |
| 199 |
mux { |
| 200 |
function = "flash"; |
| 201 |
groups = "spi_nor"; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
/* Serial NAND is shared pin with SPI-NOR */ |
| 206 |
serial_nand_pins: serial-nand-pins { |
| 207 |
mux { |
| 208 |
function = "flash"; |
| 209 |
groups = "snfi"; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
spi_pins: spi-pins { |
| 214 |
mux { |
| 215 |
function = "spi"; |
| 216 |
groups = "spi_0"; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
uart0_pins: uart0-pins { |
| 221 |
mux { |
| 222 |
function = "uart"; |
| 223 |
groups = "uart0_txd_rxd" ; |
| 224 |
}; |
| 225 |
}; |
| 226 |
|
| 227 |
uart1_pins: uart1-pins { |
| 228 |
mux { |
| 229 |
function = "uart"; |
| 230 |
groups = "uart1_0_tx_rx" ; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
uart2_pins: uart2-pins { |
| 235 |
mux { |
| 236 |
function = "uart"; |
| 237 |
groups = "uart2_0_txd_rxd" ; |
| 238 |
}; |
| 239 |
}; |
| 240 |
|
| 241 |
watchdog_pins: watchdog-pins { |
| 242 |
mux { |
| 243 |
function = "watchdog"; |
| 244 |
groups = "watchdog"; |
| 245 |
}; |
| 246 |
}; |
| 247 |
}; |
| 248 |
|
| 249 |
&spi { |
| 250 |
pinctrl-names = "default"; |
| 251 |
pinctrl-0 = <&spi_pins>; |
| 252 |
status = "okay"; |
| 253 |
}; |
| 254 |
|
| 255 |
&ssusb { |
| 256 |
vusb33-supply = <®_3p3v>; |
| 257 |
vbus-supply = <®_5v>; |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&u3phy0 { |
| 262 |
status = "okay"; |
| 263 |
}; |
| 264 |
|
| 265 |
&uart0 { |
| 266 |
pinctrl-names = "default"; |
| 267 |
pinctrl-0 = <&uart0_pins>; |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&watchdog { |
| 272 |
pinctrl-names = "default"; |
| 273 |
pinctrl-0 = <&watchdog_pins>; |
| 274 |
status = "okay"; |
| 275 |
}; |