| 1 |
/* |
| 2 |
* Copyright 2017-2018 Sean Wang <[email protected]> |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include "mt7623n.dtsi" |
| 10 |
#include "mt6323.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Bananapi BPI-R2"; |
| 14 |
compatible = "bananapi,bpi-r2", "mediatek,mt7623"; |
| 15 |
|
| 16 |
aliases { |
| 17 |
serial2 = &uart2; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial2:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
connector { |
| 25 |
compatible = "hdmi-connector"; |
| 26 |
label = "hdmi"; |
| 27 |
type = "d"; |
| 28 |
ddc-i2c-bus = <&hdmiddc0>; |
| 29 |
|
| 30 |
port { |
| 31 |
hdmi_connector_in: endpoint { |
| 32 |
remote-endpoint = <&hdmi0_out>; |
| 33 |
}; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
cpus { |
| 38 |
cpu@0 { |
| 39 |
proc-supply = <&mt6323_vproc_reg>; |
| 40 |
}; |
| 41 |
|
| 42 |
cpu@1 { |
| 43 |
proc-supply = <&mt6323_vproc_reg>; |
| 44 |
}; |
| 45 |
|
| 46 |
cpu@2 { |
| 47 |
proc-supply = <&mt6323_vproc_reg>; |
| 48 |
}; |
| 49 |
|
| 50 |
cpu@3 { |
| 51 |
proc-supply = <&mt6323_vproc_reg>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
reg_1p8v: regulator-1p8v { |
| 56 |
compatible = "regulator-fixed"; |
| 57 |
regulator-name = "fixed-1.8V"; |
| 58 |
regulator-min-microvolt = <1800000>; |
| 59 |
regulator-max-microvolt = <1800000>; |
| 60 |
regulator-boot-on; |
| 61 |
regulator-always-on; |
| 62 |
}; |
| 63 |
|
| 64 |
reg_3p3v: regulator-3p3v { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "fixed-3.3V"; |
| 67 |
regulator-min-microvolt = <3300000>; |
| 68 |
regulator-max-microvolt = <3300000>; |
| 69 |
regulator-boot-on; |
| 70 |
regulator-always-on; |
| 71 |
}; |
| 72 |
|
| 73 |
reg_5v: regulator-5v { |
| 74 |
compatible = "regulator-fixed"; |
| 75 |
regulator-name = "fixed-5V"; |
| 76 |
regulator-min-microvolt = <5000000>; |
| 77 |
regulator-max-microvolt = <5000000>; |
| 78 |
regulator-boot-on; |
| 79 |
regulator-always-on; |
| 80 |
}; |
| 81 |
|
| 82 |
reg_vgpu: fixedregulator@0 { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
regulator-name = "vdd_fixed_vgpu"; |
| 85 |
regulator-min-microvolt = <1150000>; |
| 86 |
regulator-max-microvolt = <1150000>; |
| 87 |
}; |
| 88 |
|
| 89 |
gpio-keys { |
| 90 |
compatible = "gpio-keys"; |
| 91 |
pinctrl-names = "default"; |
| 92 |
pinctrl-0 = <&key_pins_a>; |
| 93 |
|
| 94 |
button-factory { |
| 95 |
label = "factory"; |
| 96 |
linux,code = <BTN_0>; |
| 97 |
gpios = <&pio 256 GPIO_ACTIVE_LOW>; |
| 98 |
}; |
| 99 |
|
| 100 |
button-wps { |
| 101 |
label = "wps"; |
| 102 |
linux,code = <KEY_WPS_BUTTON>; |
| 103 |
gpios = <&pio 257 GPIO_ACTIVE_HIGH>; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
leds { |
| 108 |
compatible = "gpio-leds"; |
| 109 |
pinctrl-names = "default"; |
| 110 |
pinctrl-0 = <&led_pins_a>; |
| 111 |
|
| 112 |
blue { |
| 113 |
label = "bpi-r2:pio:blue"; |
| 114 |
gpios = <&pio 240 GPIO_ACTIVE_LOW>; |
| 115 |
default-state = "off"; |
| 116 |
}; |
| 117 |
|
| 118 |
green { |
| 119 |
label = "bpi-r2:pio:green"; |
| 120 |
gpios = <&pio 241 GPIO_ACTIVE_LOW>; |
| 121 |
default-state = "off"; |
| 122 |
}; |
| 123 |
|
| 124 |
red { |
| 125 |
label = "bpi-r2:pio:red"; |
| 126 |
gpios = <&pio 239 GPIO_ACTIVE_LOW>; |
| 127 |
default-state = "off"; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
memory@80000000 { |
| 132 |
device_type = "memory"; |
| 133 |
reg = <0 0x80000000 0 0x80000000>; |
| 134 |
}; |
| 135 |
}; |
| 136 |
|
| 137 |
&bls { |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&btif { |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&cec { |
| 146 |
status = "okay"; |
| 147 |
}; |
| 148 |
|
| 149 |
&cir { |
| 150 |
pinctrl-names = "default"; |
| 151 |
pinctrl-0 = <&cir_pins_a>; |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&crypto { |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&dpi0 { |
| 160 |
status = "okay"; |
| 161 |
|
| 162 |
ports { |
| 163 |
#address-cells = <1>; |
| 164 |
#size-cells = <0>; |
| 165 |
port@0 { |
| 166 |
reg = <0>; |
| 167 |
dpi0_out: endpoint { |
| 168 |
remote-endpoint = <&hdmi0_in>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
&gmac0 { |
| 175 |
status = "okay"; |
| 176 |
phy-mode = "trgmii"; |
| 177 |
|
| 178 |
fixed-link { |
| 179 |
speed = <1000>; |
| 180 |
full-duplex; |
| 181 |
pause; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
&gmac1 { |
| 186 |
status = "okay"; |
| 187 |
phy-mode = "rgmii"; |
| 188 |
|
| 189 |
fixed-link { |
| 190 |
speed = <1000>; |
| 191 |
full-duplex; |
| 192 |
pause; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
ð { |
| 197 |
status = "okay"; |
| 198 |
|
| 199 |
mdio-bus { |
| 200 |
#address-cells = <1>; |
| 201 |
#size-cells = <0>; |
| 202 |
|
| 203 |
switch@1f { |
| 204 |
compatible = "mediatek,mt7530"; |
| 205 |
reg = <0x1f>; |
| 206 |
reset-gpios = <&pio 33 0>; |
| 207 |
core-supply = <&mt6323_vpa_reg>; |
| 208 |
io-supply = <&mt6323_vemc3v3_reg>; |
| 209 |
|
| 210 |
ports { |
| 211 |
#address-cells = <1>; |
| 212 |
#size-cells = <0>; |
| 213 |
|
| 214 |
port@0 { |
| 215 |
reg = <0>; |
| 216 |
label = "wan"; |
| 217 |
}; |
| 218 |
|
| 219 |
port@1 { |
| 220 |
reg = <1>; |
| 221 |
label = "lan0"; |
| 222 |
}; |
| 223 |
|
| 224 |
port@2 { |
| 225 |
reg = <2>; |
| 226 |
label = "lan1"; |
| 227 |
}; |
| 228 |
|
| 229 |
port@3 { |
| 230 |
reg = <3>; |
| 231 |
label = "lan2"; |
| 232 |
}; |
| 233 |
|
| 234 |
port@4 { |
| 235 |
reg = <4>; |
| 236 |
label = "lan3"; |
| 237 |
}; |
| 238 |
|
| 239 |
port@5 { |
| 240 |
reg = <5>; |
| 241 |
label = "cpu"; |
| 242 |
ethernet = <&gmac1>; |
| 243 |
phy-mode = "rgmii"; |
| 244 |
|
| 245 |
fixed-link { |
| 246 |
speed = <1000>; |
| 247 |
full-duplex; |
| 248 |
pause; |
| 249 |
}; |
| 250 |
}; |
| 251 |
|
| 252 |
port@6 { |
| 253 |
reg = <6>; |
| 254 |
label = "cpu"; |
| 255 |
ethernet = <&gmac0>; |
| 256 |
phy-mode = "trgmii"; |
| 257 |
|
| 258 |
fixed-link { |
| 259 |
speed = <1000>; |
| 260 |
full-duplex; |
| 261 |
pause; |
| 262 |
}; |
| 263 |
}; |
| 264 |
}; |
| 265 |
}; |
| 266 |
}; |
| 267 |
}; |
| 268 |
|
| 269 |
&hdmi0 { |
| 270 |
pinctrl-names = "default"; |
| 271 |
pinctrl-0 = <&hdmi_pins_a>; |
| 272 |
status = "okay"; |
| 273 |
|
| 274 |
ports { |
| 275 |
#address-cells = <1>; |
| 276 |
#size-cells = <0>; |
| 277 |
port@0 { |
| 278 |
reg = <0>; |
| 279 |
hdmi0_in: endpoint { |
| 280 |
remote-endpoint = <&dpi0_out>; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
port@1 { |
| 285 |
reg = <1>; |
| 286 |
hdmi0_out: endpoint { |
| 287 |
remote-endpoint = <&hdmi_connector_in>; |
| 288 |
}; |
| 289 |
}; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
&hdmiddc0 { |
| 294 |
pinctrl-names = "default"; |
| 295 |
pinctrl-0 = <&hdmi_ddc_pins_a>; |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&hdmi_phy { |
| 300 |
mediatek,ibias = <0xa>; |
| 301 |
mediatek,ibias_up = <0x1c>; |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&i2c0 { |
| 306 |
pinctrl-names = "default"; |
| 307 |
pinctrl-0 = <&i2c0_pins_a>; |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&i2c1 { |
| 312 |
pinctrl-names = "default"; |
| 313 |
pinctrl-0 = <&i2c1_pins_a>; |
| 314 |
status = "okay"; |
| 315 |
}; |
| 316 |
|
| 317 |
&mali { |
| 318 |
mali-supply = <®_vgpu>; |
| 319 |
status = "okay"; |
| 320 |
}; |
| 321 |
|
| 322 |
&mmc0 { |
| 323 |
pinctrl-names = "default", "state_uhs"; |
| 324 |
pinctrl-0 = <&mmc0_pins_default>; |
| 325 |
pinctrl-1 = <&mmc0_pins_uhs>; |
| 326 |
status = "okay"; |
| 327 |
bus-width = <8>; |
| 328 |
max-frequency = <50000000>; |
| 329 |
cap-mmc-highspeed; |
| 330 |
vmmc-supply = <®_3p3v>; |
| 331 |
vqmmc-supply = <®_1p8v>; |
| 332 |
non-removable; |
| 333 |
}; |
| 334 |
|
| 335 |
&mmc1 { |
| 336 |
pinctrl-names = "default", "state_uhs"; |
| 337 |
pinctrl-0 = <&mmc1_pins_default>; |
| 338 |
pinctrl-1 = <&mmc1_pins_uhs>; |
| 339 |
status = "okay"; |
| 340 |
bus-width = <4>; |
| 341 |
max-frequency = <50000000>; |
| 342 |
cap-sd-highspeed; |
| 343 |
cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; |
| 344 |
vmmc-supply = <®_3p3v>; |
| 345 |
vqmmc-supply = <®_3p3v>; |
| 346 |
}; |
| 347 |
|
| 348 |
&mt6323keys { |
| 349 |
home { |
| 350 |
status = "disabled"; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
&mt6323_leds { |
| 355 |
status = "okay"; |
| 356 |
|
| 357 |
led@0 { |
| 358 |
reg = <0>; |
| 359 |
label = "bpi-r2:isink:green"; |
| 360 |
default-state = "off"; |
| 361 |
}; |
| 362 |
|
| 363 |
led@1 { |
| 364 |
reg = <1>; |
| 365 |
label = "bpi-r2:isink:red"; |
| 366 |
default-state = "off"; |
| 367 |
}; |
| 368 |
|
| 369 |
led@2 { |
| 370 |
reg = <2>; |
| 371 |
label = "bpi-r2:isink:blue"; |
| 372 |
default-state = "off"; |
| 373 |
}; |
| 374 |
}; |
| 375 |
|
| 376 |
&pcie { |
| 377 |
pinctrl-names = "default"; |
| 378 |
pinctrl-0 = <&pcie_default>; |
| 379 |
status = "okay"; |
| 380 |
|
| 381 |
pcie@0,0 { |
| 382 |
status = "okay"; |
| 383 |
}; |
| 384 |
|
| 385 |
pcie@1,0 { |
| 386 |
status = "okay"; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
&pcie0_phy { |
| 391 |
status = "okay"; |
| 392 |
}; |
| 393 |
|
| 394 |
&pcie1_phy { |
| 395 |
status = "okay"; |
| 396 |
}; |
| 397 |
|
| 398 |
&pio { |
| 399 |
musb_pins: musb { |
| 400 |
pins-musb { |
| 401 |
pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>; |
| 402 |
}; |
| 403 |
}; |
| 404 |
}; |
| 405 |
|
| 406 |
&pwm { |
| 407 |
pinctrl-names = "default"; |
| 408 |
pinctrl-0 = <&pwm_pins_a>; |
| 409 |
status = "okay"; |
| 410 |
}; |
| 411 |
|
| 412 |
&spi0 { |
| 413 |
pinctrl-names = "default"; |
| 414 |
pinctrl-0 = <&spi0_pins_a>; |
| 415 |
status = "okay"; |
| 416 |
}; |
| 417 |
|
| 418 |
&uart0 { |
| 419 |
pinctrl-names = "default"; |
| 420 |
pinctrl-0 = <&uart0_pins_a>; |
| 421 |
status = "okay"; |
| 422 |
}; |
| 423 |
|
| 424 |
&uart1 { |
| 425 |
pinctrl-names = "default"; |
| 426 |
pinctrl-0 = <&uart1_pins_a>; |
| 427 |
status = "okay"; |
| 428 |
}; |
| 429 |
|
| 430 |
&uart2 { |
| 431 |
pinctrl-names = "default"; |
| 432 |
pinctrl-0 = <&uart2_pins_a>; |
| 433 |
status = "okay"; |
| 434 |
}; |
| 435 |
|
| 436 |
&usb0 { |
| 437 |
pinctrl-names = "default"; |
| 438 |
pinctrl-0 = <&musb_pins>; |
| 439 |
status = "okay"; |
| 440 |
usb-role-switch; |
| 441 |
|
| 442 |
connector { |
| 443 |
compatible = "gpio-usb-b-connector", "usb-b-connector"; |
| 444 |
type = "micro"; |
| 445 |
id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; |
| 446 |
}; |
| 447 |
}; |
| 448 |
|
| 449 |
&usb1 { |
| 450 |
vusb33-supply = <®_3p3v>; |
| 451 |
vbus-supply = <®_5v>; |
| 452 |
status = "okay"; |
| 453 |
}; |
| 454 |
|
| 455 |
&usb2 { |
| 456 |
vusb33-supply = <®_3p3v>; |
| 457 |
vbus-supply = <®_5v>; |
| 458 |
status = "okay"; |
| 459 |
}; |
| 460 |
|
| 461 |
&u2phy1 { |
| 462 |
status = "okay"; |
| 463 |
}; |
| 464 |
|
| 465 |
&u3phy1 { |
| 466 |
status = "okay"; |
| 467 |
}; |
| 468 |
|
| 469 |
&u3phy2 { |
| 470 |
status = "okay"; |
| 471 |
}; |