| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) 2013-2014 Linaro Ltd. |
| 4 |
* Copyright (c) 2013-2014 HiSilicon Limited. |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/clock/hix5hd2-clock.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
#address-cells = <1>; |
| 11 |
#size-cells = <1>; |
| 12 |
|
| 13 |
aliases { |
| 14 |
serial0 = &uart0; |
| 15 |
}; |
| 16 |
|
| 17 |
gic: interrupt-controller@f8a01000 { |
| 18 |
compatible = "arm,cortex-a9-gic"; |
| 19 |
#interrupt-cells = <3>; |
| 20 |
#address-cells = <0>; |
| 21 |
interrupt-controller; |
| 22 |
/* gic dist base, gic cpu base */ |
| 23 |
reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; |
| 24 |
}; |
| 25 |
|
| 26 |
soc { |
| 27 |
#address-cells = <1>; |
| 28 |
#size-cells = <1>; |
| 29 |
compatible = "simple-bus"; |
| 30 |
interrupt-parent = <&gic>; |
| 31 |
ranges = <0 0xf8000000 0x8000000>; |
| 32 |
|
| 33 |
amba-bus { |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <1>; |
| 36 |
compatible = "simple-bus"; |
| 37 |
ranges; |
| 38 |
|
| 39 |
timer0: timer@2000 { |
| 40 |
compatible = "arm,sp804", "arm,primecell"; |
| 41 |
reg = <0x00002000 0x1000>; |
| 42 |
/* timer00 & timer01 */ |
| 43 |
interrupts = <0 24 4>; |
| 44 |
clocks = <&clock HIX5HD2_FIXED_24M>; |
| 45 |
status = "disabled"; |
| 46 |
}; |
| 47 |
|
| 48 |
timer1: timer@a29000 { |
| 49 |
/* |
| 50 |
* Only used in NORMAL state, not available ins |
| 51 |
* SLOW or DOZE state. |
| 52 |
* The rate is fixed in 24MHz. |
| 53 |
*/ |
| 54 |
compatible = "arm,sp804", "arm,primecell"; |
| 55 |
reg = <0x00a29000 0x1000>; |
| 56 |
/* timer10 & timer11 */ |
| 57 |
interrupts = <0 25 4>; |
| 58 |
clocks = <&clock HIX5HD2_FIXED_24M>; |
| 59 |
status = "disabled"; |
| 60 |
}; |
| 61 |
|
| 62 |
timer2: timer@a2a000 { |
| 63 |
compatible = "arm,sp804", "arm,primecell"; |
| 64 |
reg = <0x00a2a000 0x1000>; |
| 65 |
/* timer20 & timer21 */ |
| 66 |
interrupts = <0 26 4>; |
| 67 |
clocks = <&clock HIX5HD2_FIXED_24M>; |
| 68 |
status = "disabled"; |
| 69 |
}; |
| 70 |
|
| 71 |
timer3: timer@a2b000 { |
| 72 |
compatible = "arm,sp804", "arm,primecell"; |
| 73 |
reg = <0x00a2b000 0x1000>; |
| 74 |
/* timer30 & timer31 */ |
| 75 |
interrupts = <0 27 4>; |
| 76 |
clocks = <&clock HIX5HD2_FIXED_24M>; |
| 77 |
status = "disabled"; |
| 78 |
}; |
| 79 |
|
| 80 |
timer4: timer@a81000 { |
| 81 |
compatible = "arm,sp804", "arm,primecell"; |
| 82 |
reg = <0x00a81000 0x1000>; |
| 83 |
/* timer30 & timer31 */ |
| 84 |
interrupts = <0 28 4>; |
| 85 |
clocks = <&clock HIX5HD2_FIXED_24M>; |
| 86 |
status = "disabled"; |
| 87 |
}; |
| 88 |
|
| 89 |
uart0: serial@b00000 { |
| 90 |
compatible = "arm,pl011", "arm,primecell"; |
| 91 |
reg = <0x00b00000 0x1000>; |
| 92 |
interrupts = <0 49 4>; |
| 93 |
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; |
| 94 |
clock-names = "uartclk", "apb_pclk"; |
| 95 |
status = "disabled"; |
| 96 |
}; |
| 97 |
|
| 98 |
uart1: serial@6000 { |
| 99 |
compatible = "arm,pl011", "arm,primecell"; |
| 100 |
reg = <0x00006000 0x1000>; |
| 101 |
interrupts = <0 50 4>; |
| 102 |
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; |
| 103 |
clock-names = "uartclk", "apb_pclk"; |
| 104 |
status = "disabled"; |
| 105 |
}; |
| 106 |
|
| 107 |
uart2: serial@b02000 { |
| 108 |
compatible = "arm,pl011", "arm,primecell"; |
| 109 |
reg = <0x00b02000 0x1000>; |
| 110 |
interrupts = <0 51 4>; |
| 111 |
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; |
| 112 |
clock-names = "uartclk", "apb_pclk"; |
| 113 |
status = "disabled"; |
| 114 |
}; |
| 115 |
|
| 116 |
uart3: serial@b03000 { |
| 117 |
compatible = "arm,pl011", "arm,primecell"; |
| 118 |
reg = <0x00b03000 0x1000>; |
| 119 |
interrupts = <0 52 4>; |
| 120 |
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; |
| 121 |
clock-names = "uartclk", "apb_pclk"; |
| 122 |
status = "disabled"; |
| 123 |
}; |
| 124 |
|
| 125 |
uart4: serial@b04000 { |
| 126 |
compatible = "arm,pl011", "arm,primecell"; |
| 127 |
reg = <0xb04000 0x1000>; |
| 128 |
interrupts = <0 53 4>; |
| 129 |
clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>; |
| 130 |
clock-names = "uartclk", "apb_pclk"; |
| 131 |
status = "disabled"; |
| 132 |
}; |
| 133 |
|
| 134 |
gpio0: gpio@b20000 { |
| 135 |
compatible = "arm,pl061", "arm,primecell"; |
| 136 |
reg = <0xb20000 0x1000>; |
| 137 |
interrupts = <0 108 0x4>; |
| 138 |
gpio-controller; |
| 139 |
#gpio-cells = <2>; |
| 140 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 141 |
clock-names = "apb_pclk"; |
| 142 |
interrupt-controller; |
| 143 |
#interrupt-cells = <2>; |
| 144 |
status = "disabled"; |
| 145 |
}; |
| 146 |
|
| 147 |
gpio1: gpio@b21000 { |
| 148 |
compatible = "arm,pl061", "arm,primecell"; |
| 149 |
reg = <0xb21000 0x1000>; |
| 150 |
interrupts = <0 109 0x4>; |
| 151 |
gpio-controller; |
| 152 |
#gpio-cells = <2>; |
| 153 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 154 |
clock-names = "apb_pclk"; |
| 155 |
interrupt-controller; |
| 156 |
#interrupt-cells = <2>; |
| 157 |
status = "disabled"; |
| 158 |
}; |
| 159 |
|
| 160 |
gpio2: gpio@b22000 { |
| 161 |
compatible = "arm,pl061", "arm,primecell"; |
| 162 |
reg = <0xb22000 0x1000>; |
| 163 |
interrupts = <0 110 0x4>; |
| 164 |
gpio-controller; |
| 165 |
#gpio-cells = <2>; |
| 166 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 167 |
clock-names = "apb_pclk"; |
| 168 |
interrupt-controller; |
| 169 |
#interrupt-cells = <2>; |
| 170 |
status = "disabled"; |
| 171 |
}; |
| 172 |
|
| 173 |
gpio3: gpio@b23000 { |
| 174 |
compatible = "arm,pl061", "arm,primecell"; |
| 175 |
reg = <0xb23000 0x1000>; |
| 176 |
interrupts = <0 111 0x4>; |
| 177 |
gpio-controller; |
| 178 |
#gpio-cells = <2>; |
| 179 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 180 |
clock-names = "apb_pclk"; |
| 181 |
interrupt-controller; |
| 182 |
#interrupt-cells = <2>; |
| 183 |
status = "disabled"; |
| 184 |
}; |
| 185 |
|
| 186 |
gpio4: gpio@b24000 { |
| 187 |
compatible = "arm,pl061", "arm,primecell"; |
| 188 |
reg = <0xb24000 0x1000>; |
| 189 |
interrupts = <0 112 0x4>; |
| 190 |
gpio-controller; |
| 191 |
#gpio-cells = <2>; |
| 192 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 193 |
clock-names = "apb_pclk"; |
| 194 |
interrupt-controller; |
| 195 |
#interrupt-cells = <2>; |
| 196 |
status = "disabled"; |
| 197 |
}; |
| 198 |
|
| 199 |
gpio5: gpio@4000 { |
| 200 |
compatible = "arm,pl061", "arm,primecell"; |
| 201 |
reg = <0x004000 0x1000>; |
| 202 |
interrupts = <0 113 0x4>; |
| 203 |
gpio-controller; |
| 204 |
#gpio-cells = <2>; |
| 205 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 206 |
clock-names = "apb_pclk"; |
| 207 |
interrupt-controller; |
| 208 |
#interrupt-cells = <2>; |
| 209 |
status = "disabled"; |
| 210 |
}; |
| 211 |
|
| 212 |
gpio6: gpio@b26000 { |
| 213 |
compatible = "arm,pl061", "arm,primecell"; |
| 214 |
reg = <0xb26000 0x1000>; |
| 215 |
interrupts = <0 114 0x4>; |
| 216 |
gpio-controller; |
| 217 |
#gpio-cells = <2>; |
| 218 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 219 |
clock-names = "apb_pclk"; |
| 220 |
interrupt-controller; |
| 221 |
#interrupt-cells = <2>; |
| 222 |
status = "disabled"; |
| 223 |
}; |
| 224 |
|
| 225 |
gpio7: gpio@b27000 { |
| 226 |
compatible = "arm,pl061", "arm,primecell"; |
| 227 |
reg = <0xb27000 0x1000>; |
| 228 |
interrupts = <0 115 0x4>; |
| 229 |
gpio-controller; |
| 230 |
#gpio-cells = <2>; |
| 231 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 232 |
clock-names = "apb_pclk"; |
| 233 |
interrupt-controller; |
| 234 |
#interrupt-cells = <2>; |
| 235 |
status = "disabled"; |
| 236 |
}; |
| 237 |
|
| 238 |
gpio8: gpio@b28000 { |
| 239 |
compatible = "arm,pl061", "arm,primecell"; |
| 240 |
reg = <0xb28000 0x1000>; |
| 241 |
interrupts = <0 116 0x4>; |
| 242 |
gpio-controller; |
| 243 |
#gpio-cells = <2>; |
| 244 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 245 |
clock-names = "apb_pclk"; |
| 246 |
interrupt-controller; |
| 247 |
#interrupt-cells = <2>; |
| 248 |
status = "disabled"; |
| 249 |
}; |
| 250 |
|
| 251 |
gpio9: gpio@b29000 { |
| 252 |
compatible = "arm,pl061", "arm,primecell"; |
| 253 |
reg = <0xb29000 0x1000>; |
| 254 |
interrupts = <0 117 0x4>; |
| 255 |
gpio-controller; |
| 256 |
#gpio-cells = <2>; |
| 257 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 258 |
clock-names = "apb_pclk"; |
| 259 |
interrupt-controller; |
| 260 |
#interrupt-cells = <2>; |
| 261 |
status = "disabled"; |
| 262 |
}; |
| 263 |
|
| 264 |
gpio10: gpio@b2a000 { |
| 265 |
compatible = "arm,pl061", "arm,primecell"; |
| 266 |
reg = <0xb2a000 0x1000>; |
| 267 |
interrupts = <0 118 0x4>; |
| 268 |
gpio-controller; |
| 269 |
#gpio-cells = <2>; |
| 270 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 271 |
clock-names = "apb_pclk"; |
| 272 |
interrupt-controller; |
| 273 |
#interrupt-cells = <2>; |
| 274 |
status = "disabled"; |
| 275 |
}; |
| 276 |
|
| 277 |
gpio11: gpio@b2b000 { |
| 278 |
compatible = "arm,pl061", "arm,primecell"; |
| 279 |
reg = <0xb2b000 0x1000>; |
| 280 |
interrupts = <0 119 0x4>; |
| 281 |
gpio-controller; |
| 282 |
#gpio-cells = <2>; |
| 283 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 284 |
clock-names = "apb_pclk"; |
| 285 |
interrupt-controller; |
| 286 |
#interrupt-cells = <2>; |
| 287 |
status = "disabled"; |
| 288 |
}; |
| 289 |
|
| 290 |
gpio12: gpio@b2c000 { |
| 291 |
compatible = "arm,pl061", "arm,primecell"; |
| 292 |
reg = <0xb2c000 0x1000>; |
| 293 |
interrupts = <0 120 0x4>; |
| 294 |
gpio-controller; |
| 295 |
#gpio-cells = <2>; |
| 296 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 297 |
clock-names = "apb_pclk"; |
| 298 |
interrupt-controller; |
| 299 |
#interrupt-cells = <2>; |
| 300 |
status = "disabled"; |
| 301 |
}; |
| 302 |
|
| 303 |
gpio13: gpio@b2d000 { |
| 304 |
compatible = "arm,pl061", "arm,primecell"; |
| 305 |
reg = <0xb2d000 0x1000>; |
| 306 |
interrupts = <0 121 0x4>; |
| 307 |
gpio-controller; |
| 308 |
#gpio-cells = <2>; |
| 309 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 310 |
clock-names = "apb_pclk"; |
| 311 |
interrupt-controller; |
| 312 |
#interrupt-cells = <2>; |
| 313 |
status = "disabled"; |
| 314 |
}; |
| 315 |
|
| 316 |
gpio14: gpio@b2e000 { |
| 317 |
compatible = "arm,pl061", "arm,primecell"; |
| 318 |
reg = <0xb2e000 0x1000>; |
| 319 |
interrupts = <0 122 0x4>; |
| 320 |
gpio-controller; |
| 321 |
#gpio-cells = <2>; |
| 322 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 323 |
clock-names = "apb_pclk"; |
| 324 |
interrupt-controller; |
| 325 |
#interrupt-cells = <2>; |
| 326 |
status = "disabled"; |
| 327 |
}; |
| 328 |
|
| 329 |
gpio15: gpio@b2f000 { |
| 330 |
compatible = "arm,pl061", "arm,primecell"; |
| 331 |
reg = <0xb2f000 0x1000>; |
| 332 |
interrupts = <0 123 0x4>; |
| 333 |
gpio-controller; |
| 334 |
#gpio-cells = <2>; |
| 335 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 336 |
clock-names = "apb_pclk"; |
| 337 |
interrupt-controller; |
| 338 |
#interrupt-cells = <2>; |
| 339 |
status = "disabled"; |
| 340 |
}; |
| 341 |
|
| 342 |
gpio16: gpio@b30000 { |
| 343 |
compatible = "arm,pl061", "arm,primecell"; |
| 344 |
reg = <0xb30000 0x1000>; |
| 345 |
interrupts = <0 124 0x4>; |
| 346 |
gpio-controller; |
| 347 |
#gpio-cells = <2>; |
| 348 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 349 |
clock-names = "apb_pclk"; |
| 350 |
interrupt-controller; |
| 351 |
#interrupt-cells = <2>; |
| 352 |
status = "disabled"; |
| 353 |
}; |
| 354 |
|
| 355 |
gpio17: gpio@b31000 { |
| 356 |
compatible = "arm,pl061", "arm,primecell"; |
| 357 |
reg = <0xb31000 0x1000>; |
| 358 |
interrupts = <0 125 0x4>; |
| 359 |
gpio-controller; |
| 360 |
#gpio-cells = <2>; |
| 361 |
clocks = <&clock HIX5HD2_FIXED_100M>; |
| 362 |
clock-names = "apb_pclk"; |
| 363 |
interrupt-controller; |
| 364 |
#interrupt-cells = <2>; |
| 365 |
status = "disabled"; |
| 366 |
}; |
| 367 |
|
| 368 |
wdt0: watchdog@a2c000 { |
| 369 |
compatible = "arm,sp805", "arm,primecell"; |
| 370 |
arm,primecell-periphid = <0x00141805>; |
| 371 |
reg = <0xa2c000 0x1000>; |
| 372 |
interrupts = <0 29 4>; |
| 373 |
clocks = <&clock HIX5HD2_WDG0_RST>, |
| 374 |
<&clock HIX5HD2_WDG0_RST>; |
| 375 |
clock-names = "wdog_clk", "apb_pclk"; |
| 376 |
}; |
| 377 |
}; |
| 378 |
|
| 379 |
local_timer@a00600 { |
| 380 |
compatible = "arm,cortex-a9-twd-timer"; |
| 381 |
reg = <0x00a00600 0x20>; |
| 382 |
interrupts = <1 13 0xf01>; |
| 383 |
}; |
| 384 |
|
| 385 |
l2: cache-controller { |
| 386 |
compatible = "arm,pl310-cache"; |
| 387 |
reg = <0x00a10000 0x100000>; |
| 388 |
interrupts = <0 15 4>; |
| 389 |
cache-unified; |
| 390 |
cache-level = <2>; |
| 391 |
}; |
| 392 |
|
| 393 |
sysctrl: system-controller@0 { |
| 394 |
compatible = "hisilicon,sysctrl", "syscon"; |
| 395 |
reg = <0x00000000 0x1000>; |
| 396 |
}; |
| 397 |
|
| 398 |
reboot { |
| 399 |
compatible = "syscon-reboot"; |
| 400 |
regmap = <&sysctrl>; |
| 401 |
offset = <0x4>; |
| 402 |
mask = <0xdeadbeef>; |
| 403 |
}; |
| 404 |
|
| 405 |
cpuctrl@a22000 { |
| 406 |
compatible = "hisilicon,cpuctrl"; |
| 407 |
#address-cells = <1>; |
| 408 |
#size-cells = <1>; |
| 409 |
reg = <0x00a22000 0x2000>; |
| 410 |
ranges = <0 0x00a22000 0x2000>; |
| 411 |
|
| 412 |
clock: clock@0 { |
| 413 |
compatible = "hisilicon,hix5hd2-clock"; |
| 414 |
reg = <0 0x2000>; |
| 415 |
#clock-cells = <1>; |
| 416 |
}; |
| 417 |
}; |
| 418 |
|
| 419 |
/* unremovable emmc as mmcblk0 */ |
| 420 |
mmc: mmc@1830000 { |
| 421 |
compatible = "snps,dw-mshc"; |
| 422 |
reg = <0x1830000 0x1000>; |
| 423 |
interrupts = <0 35 4>; |
| 424 |
clocks = <&clock HIX5HD2_MMC_CIU_RST>, |
| 425 |
<&clock HIX5HD2_MMC_BIU_CLK>; |
| 426 |
clock-names = "biu", "ciu"; |
| 427 |
}; |
| 428 |
|
| 429 |
sd: mmc@1820000 { |
| 430 |
compatible = "snps,dw-mshc"; |
| 431 |
reg = <0x1820000 0x1000>; |
| 432 |
interrupts = <0 34 4>; |
| 433 |
clocks = <&clock HIX5HD2_SD_CIU_RST>, |
| 434 |
<&clock HIX5HD2_SD_BIU_CLK>; |
| 435 |
clock-names = "biu", "ciu"; |
| 436 |
}; |
| 437 |
|
| 438 |
gmac0: ethernet@1840000 { |
| 439 |
compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1"; |
| 440 |
reg = <0x1840000 0x1000>,<0x184300c 0x4>; |
| 441 |
interrupts = <0 71 4>; |
| 442 |
clocks = <&clock HIX5HD2_MAC0_CLK>; |
| 443 |
clock-names = "mac_core"; |
| 444 |
status = "disabled"; |
| 445 |
}; |
| 446 |
|
| 447 |
gmac1: ethernet@1841000 { |
| 448 |
compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1"; |
| 449 |
reg = <0x1841000 0x1000>,<0x1843010 0x4>; |
| 450 |
interrupts = <0 72 4>; |
| 451 |
clocks = <&clock HIX5HD2_MAC1_CLK>; |
| 452 |
clock-names = "mac_core"; |
| 453 |
status = "disabled"; |
| 454 |
}; |
| 455 |
|
| 456 |
usb0: usb@1890000 { |
| 457 |
compatible = "generic-ehci"; |
| 458 |
reg = <0x1890000 0x1000>; |
| 459 |
interrupts = <0 66 4>; |
| 460 |
clocks = <&clock HIX5HD2_USB_CLK>; |
| 461 |
}; |
| 462 |
|
| 463 |
usb1: usb@1880000 { |
| 464 |
compatible = "generic-ohci"; |
| 465 |
reg = <0x1880000 0x1000>; |
| 466 |
interrupts = <0 67 4>; |
| 467 |
clocks = <&clock HIX5HD2_USB_CLK>; |
| 468 |
}; |
| 469 |
|
| 470 |
peripheral_ctrl: syscon@a20000 { |
| 471 |
compatible = "hisilicon,peri-subctrl", "syscon"; |
| 472 |
reg = <0xa20000 0x1000>; |
| 473 |
}; |
| 474 |
|
| 475 |
sata_phy: phy@1900000 { |
| 476 |
compatible = "hisilicon,hix5hd2-sata-phy"; |
| 477 |
reg = <0x1900000 0x10000>; |
| 478 |
#phy-cells = <0>; |
| 479 |
hisilicon,peripheral-syscon = <&peripheral_ctrl>; |
| 480 |
hisilicon,power-reg = <0x8 10>; |
| 481 |
}; |
| 482 |
|
| 483 |
ahci: sata@1900000 { |
| 484 |
compatible = "hisilicon,hisi-ahci"; |
| 485 |
reg = <0x1900000 0x10000>; |
| 486 |
interrupts = <0 70 4>; |
| 487 |
clocks = <&clock HIX5HD2_SATA_CLK>; |
| 488 |
}; |
| 489 |
|
| 490 |
ir: ir@1000 { |
| 491 |
compatible = "hisilicon,hix5hd2-ir"; |
| 492 |
reg = <0x001000 0x1000>; |
| 493 |
interrupts = <0 47 4>; |
| 494 |
clocks = <&clock HIX5HD2_FIXED_24M>; |
| 495 |
hisilicon,power-syscon = <&sysctrl>; |
| 496 |
}; |
| 497 |
|
| 498 |
i2c0: i2c@b10000 { |
| 499 |
compatible = "hisilicon,hix5hd2-i2c"; |
| 500 |
reg = <0xb10000 0x1000>; |
| 501 |
interrupts = <0 38 4>; |
| 502 |
clocks = <&clock HIX5HD2_I2C0_RST>; |
| 503 |
#address-cells = <1>; |
| 504 |
#size-cells = <0>; |
| 505 |
status = "disabled"; |
| 506 |
}; |
| 507 |
|
| 508 |
i2c1: i2c@b11000 { |
| 509 |
compatible = "hisilicon,hix5hd2-i2c"; |
| 510 |
reg = <0xb11000 0x1000>; |
| 511 |
interrupts = <0 39 4>; |
| 512 |
clocks = <&clock HIX5HD2_I2C1_RST>; |
| 513 |
#address-cells = <1>; |
| 514 |
#size-cells = <0>; |
| 515 |
status = "disabled"; |
| 516 |
}; |
| 517 |
|
| 518 |
i2c2: i2c@b12000 { |
| 519 |
compatible = "hisilicon,hix5hd2-i2c"; |
| 520 |
reg = <0xb12000 0x1000>; |
| 521 |
interrupts = <0 40 4>; |
| 522 |
clocks = <&clock HIX5HD2_I2C2_RST>; |
| 523 |
#address-cells = <1>; |
| 524 |
#size-cells = <0>; |
| 525 |
status = "disabled"; |
| 526 |
}; |
| 527 |
|
| 528 |
i2c3: i2c@b13000 { |
| 529 |
compatible = "hisilicon,hix5hd2-i2c"; |
| 530 |
reg = <0xb13000 0x1000>; |
| 531 |
interrupts = <0 41 4>; |
| 532 |
clocks = <&clock HIX5HD2_I2C3_RST>; |
| 533 |
#address-cells = <1>; |
| 534 |
#size-cells = <0>; |
| 535 |
status = "disabled"; |
| 536 |
}; |
| 537 |
|
| 538 |
i2c4: i2c@b16000 { |
| 539 |
compatible = "hisilicon,hix5hd2-i2c"; |
| 540 |
reg = <0xb16000 0x1000>; |
| 541 |
interrupts = <0 43 4>; |
| 542 |
clocks = <&clock HIX5HD2_I2C4_RST>; |
| 543 |
#address-cells = <1>; |
| 544 |
#size-cells = <0>; |
| 545 |
status = "disabled"; |
| 546 |
}; |
| 547 |
|
| 548 |
i2c5: i2c@b17000 { |
| 549 |
compatible = "hisilicon,hix5hd2-i2c"; |
| 550 |
reg = <0xb17000 0x1000>; |
| 551 |
interrupts = <0 44 4>; |
| 552 |
clocks = <&clock HIX5HD2_I2C5_RST>; |
| 553 |
#address-cells = <1>; |
| 554 |
#size-cells = <0>; |
| 555 |
status = "disabled"; |
| 556 |
}; |
| 557 |
}; |
| 558 |
}; |