| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* HiSilicon Ltd. Hi3620 SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2012-2013 HiSilicon Ltd. |
| 6 |
* Copyright (C) 2012-2013 Linaro Ltd. |
| 7 |
* |
| 8 |
* Author: Haojian Zhuang <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <dt-bindings/clock/hi3620-clock.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <1>; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &uart0; |
| 19 |
serial1 = &uart1; |
| 20 |
serial2 = &uart2; |
| 21 |
serial3 = &uart3; |
| 22 |
serial4 = &uart4; |
| 23 |
}; |
| 24 |
|
| 25 |
pclk: clk { |
| 26 |
compatible = "fixed-clock"; |
| 27 |
#clock-cells = <0>; |
| 28 |
clock-frequency = <26000000>; |
| 29 |
clock-output-names = "apb_pclk"; |
| 30 |
}; |
| 31 |
|
| 32 |
cpus { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <0>; |
| 35 |
enable-method = "hisilicon,hi3620-smp"; |
| 36 |
|
| 37 |
cpu@0 { |
| 38 |
device_type = "cpu"; |
| 39 |
compatible = "arm,cortex-a9"; |
| 40 |
reg = <0x0>; |
| 41 |
next-level-cache = <&L2>; |
| 42 |
}; |
| 43 |
|
| 44 |
cpu@1 { |
| 45 |
compatible = "arm,cortex-a9"; |
| 46 |
device_type = "cpu"; |
| 47 |
reg = <1>; |
| 48 |
next-level-cache = <&L2>; |
| 49 |
}; |
| 50 |
|
| 51 |
cpu@2 { |
| 52 |
compatible = "arm,cortex-a9"; |
| 53 |
device_type = "cpu"; |
| 54 |
reg = <2>; |
| 55 |
next-level-cache = <&L2>; |
| 56 |
}; |
| 57 |
|
| 58 |
cpu@3 { |
| 59 |
compatible = "arm,cortex-a9"; |
| 60 |
device_type = "cpu"; |
| 61 |
reg = <3>; |
| 62 |
next-level-cache = <&L2>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
amba-bus { |
| 67 |
|
| 68 |
#address-cells = <1>; |
| 69 |
#size-cells = <1>; |
| 70 |
compatible = "simple-bus"; |
| 71 |
interrupt-parent = <&gic>; |
| 72 |
ranges = <0 0xfc000000 0x2000000>; |
| 73 |
|
| 74 |
L2: cache-controller { |
| 75 |
compatible = "arm,pl310-cache"; |
| 76 |
reg = <0x100000 0x100000>; |
| 77 |
interrupts = <0 15 4>; |
| 78 |
cache-unified; |
| 79 |
cache-level = <2>; |
| 80 |
}; |
| 81 |
|
| 82 |
gic: interrupt-controller@1000 { |
| 83 |
compatible = "arm,cortex-a9-gic"; |
| 84 |
#interrupt-cells = <3>; |
| 85 |
#address-cells = <0>; |
| 86 |
interrupt-controller; |
| 87 |
/* gic dist base, gic cpu base */ |
| 88 |
reg = <0x1000 0x1000>, <0x100 0x100>; |
| 89 |
}; |
| 90 |
|
| 91 |
sysctrl: system-controller@802000 { |
| 92 |
compatible = "hisilicon,sysctrl", "syscon"; |
| 93 |
#address-cells = <1>; |
| 94 |
#size-cells = <1>; |
| 95 |
ranges = <0 0x802000 0x1000>; |
| 96 |
reg = <0x802000 0x1000>; |
| 97 |
|
| 98 |
smp-offset = <0x31c>; |
| 99 |
resume-offset = <0x308>; |
| 100 |
reboot-offset = <0x4>; |
| 101 |
|
| 102 |
clock: clock@0 { |
| 103 |
compatible = "hisilicon,hi3620-clock"; |
| 104 |
reg = <0 0x10000>; |
| 105 |
#clock-cells = <1>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
dual_timer0: dual_timer@800000 { |
| 110 |
compatible = "arm,sp804", "arm,primecell"; |
| 111 |
reg = <0x800000 0x1000>; |
| 112 |
/* timer00 & timer01 */ |
| 113 |
interrupts = <0 0 4>, <0 1 4>; |
| 114 |
clocks = <&clock HI3620_TIMER0_MUX>, |
| 115 |
<&clock HI3620_TIMER1_MUX>, |
| 116 |
<&clock HI3620_TIMER0_MUX>; |
| 117 |
clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| 118 |
status = "disabled"; |
| 119 |
}; |
| 120 |
|
| 121 |
dual_timer1: dual_timer@801000 { |
| 122 |
compatible = "arm,sp804", "arm,primecell"; |
| 123 |
reg = <0x801000 0x1000>; |
| 124 |
/* timer10 & timer11 */ |
| 125 |
interrupts = <0 2 4>, <0 3 4>; |
| 126 |
clocks = <&clock HI3620_TIMER2_MUX>, |
| 127 |
<&clock HI3620_TIMER3_MUX>, |
| 128 |
<&clock HI3620_TIMER2_MUX>; |
| 129 |
clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| 130 |
status = "disabled"; |
| 131 |
}; |
| 132 |
|
| 133 |
dual_timer2: dual_timer@a01000 { |
| 134 |
compatible = "arm,sp804", "arm,primecell"; |
| 135 |
reg = <0xa01000 0x1000>; |
| 136 |
/* timer20 & timer21 */ |
| 137 |
interrupts = <0 4 4>, <0 5 4>; |
| 138 |
clocks = <&clock HI3620_TIMER4_MUX>, |
| 139 |
<&clock HI3620_TIMER5_MUX>, |
| 140 |
<&clock HI3620_TIMER4_MUX>; |
| 141 |
clock-names = "timer0lck", "timer1clk", "apb_pclk"; |
| 142 |
status = "disabled"; |
| 143 |
}; |
| 144 |
|
| 145 |
dual_timer3: dual_timer@a02000 { |
| 146 |
compatible = "arm,sp804", "arm,primecell"; |
| 147 |
reg = <0xa02000 0x1000>; |
| 148 |
/* timer30 & timer31 */ |
| 149 |
interrupts = <0 6 4>, <0 7 4>; |
| 150 |
clocks = <&clock HI3620_TIMER6_MUX>, |
| 151 |
<&clock HI3620_TIMER7_MUX>, |
| 152 |
<&clock HI3620_TIMER6_MUX>; |
| 153 |
clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| 154 |
status = "disabled"; |
| 155 |
}; |
| 156 |
|
| 157 |
dual_timer4: dual_timer@a03000 { |
| 158 |
compatible = "arm,sp804", "arm,primecell"; |
| 159 |
reg = <0xa03000 0x1000>; |
| 160 |
/* timer40 & timer41 */ |
| 161 |
interrupts = <0 96 4>, <0 97 4>; |
| 162 |
clocks = <&clock HI3620_TIMER8_MUX>, |
| 163 |
<&clock HI3620_TIMER9_MUX>, |
| 164 |
<&clock HI3620_TIMER8_MUX>; |
| 165 |
clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| 166 |
status = "disabled"; |
| 167 |
}; |
| 168 |
|
| 169 |
timer5: timer@600 { |
| 170 |
compatible = "arm,cortex-a9-twd-timer"; |
| 171 |
reg = <0x600 0x20>; |
| 172 |
interrupts = <1 13 0xf01>; |
| 173 |
}; |
| 174 |
|
| 175 |
uart0: serial@b00000 { |
| 176 |
compatible = "arm,pl011", "arm,primecell"; |
| 177 |
reg = <0xb00000 0x1000>; |
| 178 |
interrupts = <0 20 4>; |
| 179 |
clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>; |
| 180 |
clock-names = "uartclk", "apb_pclk"; |
| 181 |
status = "disabled"; |
| 182 |
}; |
| 183 |
|
| 184 |
uart1: serial@b01000 { |
| 185 |
compatible = "arm,pl011", "arm,primecell"; |
| 186 |
reg = <0xb01000 0x1000>; |
| 187 |
interrupts = <0 21 4>; |
| 188 |
clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>; |
| 189 |
clock-names = "uartclk", "apb_pclk"; |
| 190 |
status = "disabled"; |
| 191 |
}; |
| 192 |
|
| 193 |
uart2: serial@b02000 { |
| 194 |
compatible = "arm,pl011", "arm,primecell"; |
| 195 |
reg = <0xb02000 0x1000>; |
| 196 |
interrupts = <0 22 4>; |
| 197 |
clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>; |
| 198 |
clock-names = "uartclk", "apb_pclk"; |
| 199 |
status = "disabled"; |
| 200 |
}; |
| 201 |
|
| 202 |
uart3: serial@b03000 { |
| 203 |
compatible = "arm,pl011", "arm,primecell"; |
| 204 |
reg = <0xb03000 0x1000>; |
| 205 |
interrupts = <0 23 4>; |
| 206 |
clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>; |
| 207 |
clock-names = "uartclk", "apb_pclk"; |
| 208 |
status = "disabled"; |
| 209 |
}; |
| 210 |
|
| 211 |
uart4: serial@b04000 { |
| 212 |
compatible = "arm,pl011", "arm,primecell"; |
| 213 |
reg = <0xb04000 0x1000>; |
| 214 |
interrupts = <0 24 4>; |
| 215 |
clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>; |
| 216 |
clock-names = "uartclk", "apb_pclk"; |
| 217 |
status = "disabled"; |
| 218 |
}; |
| 219 |
|
| 220 |
gpio0: gpio@806000 { |
| 221 |
compatible = "arm,pl061", "arm,primecell"; |
| 222 |
reg = <0x806000 0x1000>; |
| 223 |
interrupts = <0 64 0x4>; |
| 224 |
gpio-controller; |
| 225 |
#gpio-cells = <2>; |
| 226 |
gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1 |
| 227 |
&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; |
| 228 |
interrupt-controller; |
| 229 |
#interrupt-cells = <2>; |
| 230 |
clocks = <&clock HI3620_GPIOCLK0>; |
| 231 |
clock-names = "apb_pclk"; |
| 232 |
}; |
| 233 |
|
| 234 |
gpio1: gpio@807000 { |
| 235 |
compatible = "arm,pl061", "arm,primecell"; |
| 236 |
reg = <0x807000 0x1000>; |
| 237 |
interrupts = <0 65 0x4>; |
| 238 |
gpio-controller; |
| 239 |
#gpio-cells = <2>; |
| 240 |
gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 |
| 241 |
&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1 |
| 242 |
&pmx0 6 5 1 &pmx0 7 6 1>; |
| 243 |
interrupt-controller; |
| 244 |
#interrupt-cells = <2>; |
| 245 |
clocks = <&clock HI3620_GPIOCLK1>; |
| 246 |
clock-names = "apb_pclk"; |
| 247 |
}; |
| 248 |
|
| 249 |
gpio2: gpio@808000 { |
| 250 |
compatible = "arm,pl061", "arm,primecell"; |
| 251 |
reg = <0x808000 0x1000>; |
| 252 |
interrupts = <0 66 0x4>; |
| 253 |
gpio-controller; |
| 254 |
#gpio-cells = <2>; |
| 255 |
gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1 |
| 256 |
&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1 |
| 257 |
&pmx0 6 3 1 &pmx0 7 3 1>; |
| 258 |
interrupt-controller; |
| 259 |
#interrupt-cells = <2>; |
| 260 |
clocks = <&clock HI3620_GPIOCLK2>; |
| 261 |
clock-names = "apb_pclk"; |
| 262 |
}; |
| 263 |
|
| 264 |
gpio3: gpio@809000 { |
| 265 |
compatible = "arm,pl061", "arm,primecell"; |
| 266 |
reg = <0x809000 0x1000>; |
| 267 |
interrupts = <0 67 0x4>; |
| 268 |
gpio-controller; |
| 269 |
#gpio-cells = <2>; |
| 270 |
gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 |
| 271 |
&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1 |
| 272 |
&pmx0 6 11 1 &pmx0 7 11 1>; |
| 273 |
interrupt-controller; |
| 274 |
#interrupt-cells = <2>; |
| 275 |
clocks = <&clock HI3620_GPIOCLK3>; |
| 276 |
clock-names = "apb_pclk"; |
| 277 |
}; |
| 278 |
|
| 279 |
gpio4: gpio@80a000 { |
| 280 |
compatible = "arm,pl061", "arm,primecell"; |
| 281 |
reg = <0x80a000 0x1000>; |
| 282 |
interrupts = <0 68 0x4>; |
| 283 |
gpio-controller; |
| 284 |
#gpio-cells = <2>; |
| 285 |
gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1 |
| 286 |
&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1 |
| 287 |
&pmx0 6 13 1 &pmx0 7 13 1>; |
| 288 |
interrupt-controller; |
| 289 |
#interrupt-cells = <2>; |
| 290 |
clocks = <&clock HI3620_GPIOCLK4>; |
| 291 |
clock-names = "apb_pclk"; |
| 292 |
}; |
| 293 |
|
| 294 |
gpio5: gpio@80b000 { |
| 295 |
compatible = "arm,pl061", "arm,primecell"; |
| 296 |
reg = <0x80b000 0x1000>; |
| 297 |
interrupts = <0 69 0x4>; |
| 298 |
gpio-controller; |
| 299 |
#gpio-cells = <2>; |
| 300 |
gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1 |
| 301 |
&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1 |
| 302 |
&pmx0 6 16 1 &pmx0 7 16 1>; |
| 303 |
interrupt-controller; |
| 304 |
#interrupt-cells = <2>; |
| 305 |
clocks = <&clock HI3620_GPIOCLK5>; |
| 306 |
clock-names = "apb_pclk"; |
| 307 |
}; |
| 308 |
|
| 309 |
gpio6: gpio@80c000 { |
| 310 |
compatible = "arm,pl061", "arm,primecell"; |
| 311 |
reg = <0x80c000 0x1000>; |
| 312 |
interrupts = <0 70 0x4>; |
| 313 |
gpio-controller; |
| 314 |
#gpio-cells = <2>; |
| 315 |
gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1 |
| 316 |
&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1 |
| 317 |
&pmx0 6 18 1 &pmx0 7 19 1>; |
| 318 |
interrupt-controller; |
| 319 |
#interrupt-cells = <2>; |
| 320 |
clocks = <&clock HI3620_GPIOCLK6>; |
| 321 |
clock-names = "apb_pclk"; |
| 322 |
}; |
| 323 |
|
| 324 |
gpio7: gpio@80d000 { |
| 325 |
compatible = "arm,pl061", "arm,primecell"; |
| 326 |
reg = <0x80d000 0x1000>; |
| 327 |
interrupts = <0 71 0x4>; |
| 328 |
gpio-controller; |
| 329 |
#gpio-cells = <2>; |
| 330 |
gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1 |
| 331 |
&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1 |
| 332 |
&pmx0 6 25 1 &pmx0 7 26 1>; |
| 333 |
interrupt-controller; |
| 334 |
#interrupt-cells = <2>; |
| 335 |
clocks = <&clock HI3620_GPIOCLK7>; |
| 336 |
clock-names = "apb_pclk"; |
| 337 |
}; |
| 338 |
|
| 339 |
gpio8: gpio@80e000 { |
| 340 |
compatible = "arm,pl061", "arm,primecell"; |
| 341 |
reg = <0x80e000 0x1000>; |
| 342 |
interrupts = <0 72 0x4>; |
| 343 |
gpio-controller; |
| 344 |
#gpio-cells = <2>; |
| 345 |
gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1 |
| 346 |
&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1 |
| 347 |
&pmx0 6 33 1 &pmx0 7 34 1>; |
| 348 |
interrupt-controller; |
| 349 |
#interrupt-cells = <2>; |
| 350 |
clocks = <&clock HI3620_GPIOCLK8>; |
| 351 |
clock-names = "apb_pclk"; |
| 352 |
}; |
| 353 |
|
| 354 |
gpio9: gpio@80f000 { |
| 355 |
compatible = "arm,pl061", "arm,primecell"; |
| 356 |
reg = <0x80f000 0x1000>; |
| 357 |
interrupts = <0 73 0x4>; |
| 358 |
gpio-controller; |
| 359 |
#gpio-cells = <2>; |
| 360 |
gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1 |
| 361 |
&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1 |
| 362 |
&pmx0 6 41 1>; |
| 363 |
interrupt-controller; |
| 364 |
#interrupt-cells = <2>; |
| 365 |
clocks = <&clock HI3620_GPIOCLK9>; |
| 366 |
clock-names = "apb_pclk"; |
| 367 |
}; |
| 368 |
|
| 369 |
gpio10: gpio@810000 { |
| 370 |
compatible = "arm,pl061", "arm,primecell"; |
| 371 |
reg = <0x810000 0x1000>; |
| 372 |
interrupts = <0 74 0x4>; |
| 373 |
gpio-controller; |
| 374 |
#gpio-cells = <2>; |
| 375 |
gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1 |
| 376 |
&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; |
| 377 |
interrupt-controller; |
| 378 |
#interrupt-cells = <2>; |
| 379 |
clocks = <&clock HI3620_GPIOCLK10>; |
| 380 |
clock-names = "apb_pclk"; |
| 381 |
}; |
| 382 |
|
| 383 |
gpio11: gpio@811000 { |
| 384 |
compatible = "arm,pl061", "arm,primecell"; |
| 385 |
reg = <0x811000 0x1000>; |
| 386 |
interrupts = <0 75 0x4>; |
| 387 |
gpio-controller; |
| 388 |
#gpio-cells = <2>; |
| 389 |
gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1 |
| 390 |
&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1 |
| 391 |
&pmx0 6 49 1 &pmx0 7 49 1>; |
| 392 |
interrupt-controller; |
| 393 |
#interrupt-cells = <2>; |
| 394 |
clocks = <&clock HI3620_GPIOCLK11>; |
| 395 |
clock-names = "apb_pclk"; |
| 396 |
}; |
| 397 |
|
| 398 |
gpio12: gpio@812000 { |
| 399 |
compatible = "arm,pl061", "arm,primecell"; |
| 400 |
reg = <0x812000 0x1000>; |
| 401 |
interrupts = <0 76 0x4>; |
| 402 |
gpio-controller; |
| 403 |
#gpio-cells = <2>; |
| 404 |
gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1 |
| 405 |
&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1 |
| 406 |
&pmx0 6 51 1 &pmx0 7 52 1>; |
| 407 |
interrupt-controller; |
| 408 |
#interrupt-cells = <2>; |
| 409 |
clocks = <&clock HI3620_GPIOCLK12>; |
| 410 |
clock-names = "apb_pclk"; |
| 411 |
}; |
| 412 |
|
| 413 |
gpio13: gpio@813000 { |
| 414 |
compatible = "arm,pl061", "arm,primecell"; |
| 415 |
reg = <0x813000 0x1000>; |
| 416 |
interrupts = <0 77 0x4>; |
| 417 |
gpio-controller; |
| 418 |
#gpio-cells = <2>; |
| 419 |
gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1 |
| 420 |
&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1 |
| 421 |
&pmx0 6 55 1 &pmx0 7 56 1>; |
| 422 |
interrupt-controller; |
| 423 |
#interrupt-cells = <2>; |
| 424 |
clocks = <&clock HI3620_GPIOCLK13>; |
| 425 |
clock-names = "apb_pclk"; |
| 426 |
}; |
| 427 |
|
| 428 |
gpio14: gpio@814000 { |
| 429 |
compatible = "arm,pl061", "arm,primecell"; |
| 430 |
reg = <0x814000 0x1000>; |
| 431 |
interrupts = <0 78 0x4>; |
| 432 |
gpio-controller; |
| 433 |
#gpio-cells = <2>; |
| 434 |
gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1 |
| 435 |
&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1 |
| 436 |
&pmx0 6 60 1 &pmx0 7 61 1>; |
| 437 |
interrupt-controller; |
| 438 |
#interrupt-cells = <2>; |
| 439 |
clocks = <&clock HI3620_GPIOCLK14>; |
| 440 |
clock-names = "apb_pclk"; |
| 441 |
}; |
| 442 |
|
| 443 |
gpio15: gpio@815000 { |
| 444 |
compatible = "arm,pl061", "arm,primecell"; |
| 445 |
reg = <0x815000 0x1000>; |
| 446 |
interrupts = <0 79 0x4>; |
| 447 |
gpio-controller; |
| 448 |
#gpio-cells = <2>; |
| 449 |
gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1 |
| 450 |
&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1 |
| 451 |
&pmx0 6 64 1 &pmx0 7 65 1>; |
| 452 |
interrupt-controller; |
| 453 |
#interrupt-cells = <2>; |
| 454 |
clocks = <&clock HI3620_GPIOCLK15>; |
| 455 |
clock-names = "apb_pclk"; |
| 456 |
}; |
| 457 |
|
| 458 |
gpio16: gpio@816000 { |
| 459 |
compatible = "arm,pl061", "arm,primecell"; |
| 460 |
reg = <0x816000 0x1000>; |
| 461 |
interrupts = <0 80 0x4>; |
| 462 |
gpio-controller; |
| 463 |
#gpio-cells = <2>; |
| 464 |
gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1 |
| 465 |
&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1 |
| 466 |
&pmx0 6 72 1 &pmx0 7 73 1>; |
| 467 |
interrupt-controller; |
| 468 |
#interrupt-cells = <2>; |
| 469 |
clocks = <&clock HI3620_GPIOCLK16>; |
| 470 |
clock-names = "apb_pclk"; |
| 471 |
}; |
| 472 |
|
| 473 |
gpio17: gpio@817000 { |
| 474 |
compatible = "arm,pl061", "arm,primecell"; |
| 475 |
reg = <0x817000 0x1000>; |
| 476 |
interrupts = <0 81 0x4>; |
| 477 |
gpio-controller; |
| 478 |
#gpio-cells = <2>; |
| 479 |
gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1 |
| 480 |
&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1 |
| 481 |
&pmx0 6 80 1 &pmx0 7 81 1>; |
| 482 |
interrupt-controller; |
| 483 |
#interrupt-cells = <2>; |
| 484 |
clocks = <&clock HI3620_GPIOCLK17>; |
| 485 |
clock-names = "apb_pclk"; |
| 486 |
}; |
| 487 |
|
| 488 |
gpio18: gpio@818000 { |
| 489 |
compatible = "arm,pl061", "arm,primecell"; |
| 490 |
reg = <0x818000 0x1000>; |
| 491 |
interrupts = <0 82 0x4>; |
| 492 |
gpio-controller; |
| 493 |
#gpio-cells = <2>; |
| 494 |
gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1 |
| 495 |
&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1 |
| 496 |
&pmx0 6 86 1 &pmx0 7 87 1>; |
| 497 |
interrupt-controller; |
| 498 |
#interrupt-cells = <2>; |
| 499 |
clocks = <&clock HI3620_GPIOCLK18>; |
| 500 |
clock-names = "apb_pclk"; |
| 501 |
}; |
| 502 |
|
| 503 |
gpio19: gpio@819000 { |
| 504 |
compatible = "arm,pl061", "arm,primecell"; |
| 505 |
reg = <0x819000 0x1000>; |
| 506 |
interrupts = <0 83 0x4>; |
| 507 |
gpio-controller; |
| 508 |
#gpio-cells = <2>; |
| 509 |
gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1 |
| 510 |
&pmx0 3 88 1>; |
| 511 |
interrupt-controller; |
| 512 |
#interrupt-cells = <2>; |
| 513 |
clocks = <&clock HI3620_GPIOCLK19>; |
| 514 |
clock-names = "apb_pclk"; |
| 515 |
}; |
| 516 |
|
| 517 |
gpio20: gpio@81a000 { |
| 518 |
compatible = "arm,pl061", "arm,primecell"; |
| 519 |
reg = <0x81a000 0x1000>; |
| 520 |
interrupts = <0 84 0x4>; |
| 521 |
gpio-controller; |
| 522 |
#gpio-cells = <2>; |
| 523 |
gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1 |
| 524 |
&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; |
| 525 |
interrupt-controller; |
| 526 |
#interrupt-cells = <2>; |
| 527 |
clocks = <&clock HI3620_GPIOCLK20>; |
| 528 |
clock-names = "apb_pclk"; |
| 529 |
}; |
| 530 |
|
| 531 |
gpio21: gpio@81b000 { |
| 532 |
compatible = "arm,pl061", "arm,primecell"; |
| 533 |
reg = <0x81b000 0x1000>; |
| 534 |
interrupts = <0 85 0x4>; |
| 535 |
gpio-controller; |
| 536 |
#gpio-cells = <2>; |
| 537 |
gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; |
| 538 |
interrupt-controller; |
| 539 |
#interrupt-cells = <2>; |
| 540 |
clocks = <&clock HI3620_GPIOCLK21>; |
| 541 |
clock-names = "apb_pclk"; |
| 542 |
}; |
| 543 |
|
| 544 |
pmx0: pinmux@803000 { |
| 545 |
compatible = "pinctrl-single"; |
| 546 |
reg = <0x803000 0x188>; |
| 547 |
#address-cells = <1>; |
| 548 |
#size-cells = <0>; |
| 549 |
#pinctrl-cells = <1>; |
| 550 |
#gpio-range-cells = <3>; |
| 551 |
|
| 552 |
pinctrl-single,register-width = <32>; |
| 553 |
pinctrl-single,function-mask = <7>; |
| 554 |
/* pin base, nr pins & gpio function */ |
| 555 |
pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 |
| 556 |
&range 12 1 0 &range 13 29 1 |
| 557 |
&range 43 1 0 &range 44 49 1 |
| 558 |
&range 94 1 1 &range 96 2 1>; |
| 559 |
|
| 560 |
range: gpio-range { |
| 561 |
#pinctrl-single,gpio-range-cells = <3>; |
| 562 |
}; |
| 563 |
}; |
| 564 |
|
| 565 |
pmx1: pinmux@803800 { |
| 566 |
compatible = "pinconf-single"; |
| 567 |
reg = <0x803800 0x2dc>; |
| 568 |
#address-cells = <1>; |
| 569 |
#size-cells = <0>; |
| 570 |
#pinctrl-cells = <1>; |
| 571 |
|
| 572 |
pinctrl-single,register-width = <32>; |
| 573 |
}; |
| 574 |
}; |
| 575 |
}; |