| 1 |
.. SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
THine THP7312 ISP driver |
| 4 |
======================== |
| 5 |
|
| 6 |
The THP7312 driver implements the following driver-specific controls: |
| 7 |
|
| 8 |
``V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION`` |
| 9 |
Enable/Disable auto-adjustment, based on lighting conditions, of the frame |
| 10 |
rate when auto-exposure is enabled. |
| 11 |
|
| 12 |
``V4L2_CID_THP7312_AUTO_FOCUS_METHOD`` |
| 13 |
Set method of auto-focus. Only takes effect when auto-focus is enabled. |
| 14 |
|
| 15 |
.. flat-table:: |
| 16 |
:header-rows: 0 |
| 17 |
:stub-columns: 0 |
| 18 |
:widths: 1 4 |
| 19 |
|
| 20 |
* - ``0`` |
| 21 |
- Contrast-based auto-focus |
| 22 |
* - ``1`` |
| 23 |
- PDAF |
| 24 |
* - ``2`` |
| 25 |
- Hybrid of contrast-based and PDAF |
| 26 |
|
| 27 |
Supported values for the control depend on the camera sensor module |
| 28 |
connected to the THP7312. If the module doesn't have a focus lens actuator, |
| 29 |
this control will not be exposed by the THP7312 driver. If the module has a |
| 30 |
controllable focus lens but the sensor doesn't support PDAF, only the |
| 31 |
contrast-based auto-focus value will be valid. Otherwise all values for the |
| 32 |
controls will be supported. |
| 33 |
|
| 34 |
``V4L2_CID_THP7312_NOISE_REDUCTION_AUTO`` |
| 35 |
Enable/Disable auto noise reduction. |
| 36 |
|
| 37 |
``V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE`` |
| 38 |
Set the noise reduction strength, where 0 is the weakest and 10 is the |
| 39 |
strongest. |