| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
DW100 dewarp driver |
| 4 |
=================== |
| 5 |
|
| 6 |
The Vivante DW100 Dewarp Processor IP core found on i.MX8MP SoC applies a |
| 7 |
programmable geometrical transformation on the input image to correct distortion |
| 8 |
introduced by lenses. |
| 9 |
|
| 10 |
The transformation function is exposed by the hardware as a grid map with 16x16 |
| 11 |
pixel macroblocks indexed using X, Y vertex coordinates. |
| 12 |
:: |
| 13 |
|
| 14 |
Image width |
| 15 |
<---------------------------------------> |
| 16 |
|
| 17 |
^ .-------.-------.-------.-------.-------. |
| 18 |
| | 16x16 | | | | | |
| 19 |
I | | pixel | | | | | |
| 20 |
m | | block | | | | | |
| 21 |
a | .-------.-------.-------.-------.-------. |
| 22 |
g | | | | | | | |
| 23 |
e | | | | | | | |
| 24 |
| | | | | | | |
| 25 |
h | .-------.-------.-------.-------.-------. |
| 26 |
e | | | | | | | |
| 27 |
i | | | | | | | |
| 28 |
g | | | | | | | |
| 29 |
h | .-------.-------.-------.-------.-------. |
| 30 |
t | | | | | | | |
| 31 |
| | | | | | | |
| 32 |
| | | | | | | |
| 33 |
v '-------'-------'-------'-------'-------' |
| 34 |
|
| 35 |
Grid of Image Blocks for Dewarping Map |
| 36 |
|
| 37 |
|
| 38 |
Each x, y coordinate register uses 16 bits to record the coordinate address in |
| 39 |
an unsigned 12.4 fixed point format (UQ12.4). |
| 40 |
:: |
| 41 |
|
| 42 |
.----------------------.--------..----------------------.--------. |
| 43 |
| 31~20 | 19~16 || 15~4 | 3~0 | |
| 44 |
| (integer) | (frac) || (integer) | (frac) | |
| 45 |
'----------------------'--------''----------------------'--------' |
| 46 |
<-------------------------------><-------------------------------> |
| 47 |
Y coordinate X coordinate |
| 48 |
|
| 49 |
Remap Register Layout |
| 50 |
|
| 51 |
The dewarping map is set from applications using the |
| 52 |
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP control. The control contains |
| 53 |
an array of u32 values storing (x, y) destination coordinates for each |
| 54 |
vertex of the grid. The x coordinate is stored in the 16 LSBs and the y |
| 55 |
coordinate in the 16 MSBs. |
| 56 |
|
| 57 |
The number of elements in the array must match the image size: |
| 58 |
|
| 59 |
.. code-block:: C |
| 60 |
|
| 61 |
elems = (DIV_ROUND_UP(width, 16) + 1) * (DIV_ROUND_UP(height, 16) + 1); |
| 62 |
|
| 63 |
If the control has not been set by the application, the driver uses an identity |
| 64 |
map. |
| 65 |
|
| 66 |
More details on the DW100 hardware operations can be found in |
| 67 |
*chapter 13.15 DeWarp* of IMX8MP_ reference manual. |
| 68 |
|
| 69 |
The Vivante DW100 m2m driver implements the following driver-specific control: |
| 70 |
|
| 71 |
``V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (__u32 array)`` |
| 72 |
Specifies to DW100 driver its dewarping map (aka LUT) blob as described in |
| 73 |
*chapter 13.15.2.3 Dewarping Remap* of IMX8MP_ reference manual as an U32 |
| 74 |
dynamic array. The image is divided into many small 16x16 blocks. If the |
| 75 |
width/height of the image is not divisible by 16, the size of the |
| 76 |
rightmost/bottommost block is the remainder. The dewarping map only saves |
| 77 |
the vertex coordinates of the block. The dewarping grid map is comprised of |
| 78 |
vertex coordinates for x and y. Each x, y coordinate register uses 16 bits |
| 79 |
(UQ12.4) to record the coordinate address, with the Y coordinate in the |
| 80 |
upper bits and X in the lower bits. The driver modifies the dimensions of |
| 81 |
this control when the sink format is changed, to reflect the new input |
| 82 |
resolution. |
| 83 |
|
| 84 |
.. _IMX8MP: https://www.nxp.com/webapp/Download?colCode=IMX8MPRM |