| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
.. include:: <isonum.txt> |
| 4 |
|
| 5 |
======================== |
| 6 |
SysKonnect driver - SKFP |
| 7 |
======================== |
| 8 |
|
| 9 |
|copy| Copyright 1998-2000 SysKonnect, |
| 10 |
|
| 11 |
skfp.txt created 11-May-2000 |
| 12 |
|
| 13 |
Readme File for skfp.o v2.06 |
| 14 |
|
| 15 |
|
| 16 |
.. This file contains |
| 17 |
|
| 18 |
(1) OVERVIEW |
| 19 |
(2) SUPPORTED ADAPTERS |
| 20 |
(3) GENERAL INFORMATION |
| 21 |
(4) INSTALLATION |
| 22 |
(5) INCLUSION OF THE ADAPTER IN SYSTEM START |
| 23 |
(6) TROUBLESHOOTING |
| 24 |
(7) FUNCTION OF THE ADAPTER LEDS |
| 25 |
(8) HISTORY |
| 26 |
|
| 27 |
|
| 28 |
1. Overview |
| 29 |
=========== |
| 30 |
|
| 31 |
This README explains how to use the driver 'skfp' for Linux with your |
| 32 |
network adapter. |
| 33 |
|
| 34 |
Chapter 2: Contains a list of all network adapters that are supported by |
| 35 |
this driver. |
| 36 |
|
| 37 |
Chapter 3: |
| 38 |
Gives some general information. |
| 39 |
|
| 40 |
Chapter 4: Describes common problems and solutions. |
| 41 |
|
| 42 |
Chapter 5: Shows the changed functionality of the adapter LEDs. |
| 43 |
|
| 44 |
Chapter 6: History of development. |
| 45 |
|
| 46 |
|
| 47 |
2. Supported adapters |
| 48 |
===================== |
| 49 |
|
| 50 |
The network driver 'skfp' supports the following network adapters: |
| 51 |
SysKonnect adapters: |
| 52 |
|
| 53 |
- SK-5521 (SK-NET FDDI-UP) |
| 54 |
- SK-5522 (SK-NET FDDI-UP DAS) |
| 55 |
- SK-5541 (SK-NET FDDI-FP) |
| 56 |
- SK-5543 (SK-NET FDDI-LP) |
| 57 |
- SK-5544 (SK-NET FDDI-LP DAS) |
| 58 |
- SK-5821 (SK-NET FDDI-UP64) |
| 59 |
- SK-5822 (SK-NET FDDI-UP64 DAS) |
| 60 |
- SK-5841 (SK-NET FDDI-FP64) |
| 61 |
- SK-5843 (SK-NET FDDI-LP64) |
| 62 |
- SK-5844 (SK-NET FDDI-LP64 DAS) |
| 63 |
|
| 64 |
Compaq adapters (not tested): |
| 65 |
|
| 66 |
- Netelligent 100 FDDI DAS Fibre SC |
| 67 |
- Netelligent 100 FDDI SAS Fibre SC |
| 68 |
- Netelligent 100 FDDI DAS UTP |
| 69 |
- Netelligent 100 FDDI SAS UTP |
| 70 |
- Netelligent 100 FDDI SAS Fibre MIC |
| 71 |
|
| 72 |
|
| 73 |
3. General Information |
| 74 |
====================== |
| 75 |
|
| 76 |
From v2.01 on, the driver is integrated in the linux kernel sources. |
| 77 |
Therefore, the installation is the same as for any other adapter |
| 78 |
supported by the kernel. |
| 79 |
|
| 80 |
Refer to the manual of your distribution about the installation |
| 81 |
of network adapters. |
| 82 |
|
| 83 |
Makes my life much easier :-) |
| 84 |
|
| 85 |
4. Troubleshooting |
| 86 |
================== |
| 87 |
|
| 88 |
If you run into problems during installation, check those items: |
| 89 |
|
| 90 |
Problem: |
| 91 |
The FDDI adapter cannot be found by the driver. |
| 92 |
|
| 93 |
Reason: |
| 94 |
Look in /proc/pci for the following entry: |
| 95 |
|
| 96 |
'FDDI network controller: SysKonnect SK-FDDI-PCI ...' |
| 97 |
|
| 98 |
If this entry exists, then the FDDI adapter has been |
| 99 |
found by the system and should be able to be used. |
| 100 |
|
| 101 |
If this entry does not exist or if the file '/proc/pci' |
| 102 |
is not there, then you may have a hardware problem or PCI |
| 103 |
support may not be enabled in your kernel. |
| 104 |
|
| 105 |
The adapter can be checked using the diagnostic program |
| 106 |
which is available from the SysKonnect web site: |
| 107 |
|
| 108 |
www.syskonnect.de |
| 109 |
|
| 110 |
Some COMPAQ machines have a problem with PCI under |
| 111 |
Linux. This is described in the 'PCI howto' document |
| 112 |
(included in some distributions or available from the |
| 113 |
www, e.g. at 'www.linux.org') and no workaround is available. |
| 114 |
|
| 115 |
Problem: |
| 116 |
You want to use your computer as a router between |
| 117 |
multiple IP subnetworks (using multiple adapters), but |
| 118 |
you cannot reach computers in other subnetworks. |
| 119 |
|
| 120 |
Reason: |
| 121 |
Either the router's kernel is not configured for IP |
| 122 |
forwarding or there is a problem with the routing table |
| 123 |
and gateway configuration in at least one of the |
| 124 |
computers. |
| 125 |
|
| 126 |
If your problem is not listed here, please contact our |
| 127 |
technical support for help. |
| 128 |
|
| 129 |
You can send email to: [email protected] |
| 130 |
|
| 131 |
When contacting our technical support, |
| 132 |
please ensure that the following information is available: |
| 133 |
|
| 134 |
- System Manufacturer and Model |
| 135 |
- Boards in your system |
| 136 |
- Distribution |
| 137 |
- Kernel version |
| 138 |
|
| 139 |
|
| 140 |
5. Function of the Adapter LEDs |
| 141 |
=============================== |
| 142 |
|
| 143 |
The functionality of the LED's on the FDDI network adapters was |
| 144 |
changed in SMT version v2.82. With this new SMT version, the yellow |
| 145 |
LED works as a ring operational indicator. An active yellow LED |
| 146 |
indicates that the ring is down. The green LED on the adapter now |
| 147 |
works as a link indicator where an active GREEN LED indicates that |
| 148 |
the respective port has a physical connection. |
| 149 |
|
| 150 |
With versions of SMT prior to v2.82 a ring up was indicated if the |
| 151 |
yellow LED was off while the green LED(s) showed the connection |
| 152 |
status of the adapter. During a ring down the green LED was off and |
| 153 |
the yellow LED was on. |
| 154 |
|
| 155 |
All implementations indicate that a driver is not loaded if |
| 156 |
all LEDs are off. |
| 157 |
|
| 158 |
|
| 159 |
6. History |
| 160 |
========== |
| 161 |
|
| 162 |
v2.06 (20000511) (In-Kernel version) |
| 163 |
New features: |
| 164 |
|
| 165 |
- 64 bit support |
| 166 |
- new pci dma interface |
| 167 |
- in kernel 2.3.99 |
| 168 |
|
| 169 |
v2.05 (20000217) (In-Kernel version) |
| 170 |
New features: |
| 171 |
|
| 172 |
- Changes for 2.3.45 kernel |
| 173 |
|
| 174 |
v2.04 (20000207) (Standalone version) |
| 175 |
New features: |
| 176 |
|
| 177 |
- Added rx/tx byte counter |
| 178 |
|
| 179 |
v2.03 (20000111) (Standalone version) |
| 180 |
Problems fixed: |
| 181 |
|
| 182 |
- Fixed printk statements from v2.02 |
| 183 |
|
| 184 |
v2.02 (991215) (Standalone version) |
| 185 |
Problems fixed: |
| 186 |
|
| 187 |
- Removed unnecessary output |
| 188 |
- Fixed path for "printver.sh" in makefile |
| 189 |
|
| 190 |
v2.01 (991122) (In-Kernel version) |
| 191 |
New features: |
| 192 |
|
| 193 |
- Integration in Linux kernel sources |
| 194 |
- Support for memory mapped I/O. |
| 195 |
|
| 196 |
v2.00 (991112) |
| 197 |
New features: |
| 198 |
|
| 199 |
- Full source released under GPL |
| 200 |
|
| 201 |
v1.05 (991023) |
| 202 |
Problems fixed: |
| 203 |
|
| 204 |
- Compilation with kernel version 2.2.13 failed |
| 205 |
|
| 206 |
v1.04 (990427) |
| 207 |
Changes: |
| 208 |
|
| 209 |
- New SMT module included, changing LED functionality |
| 210 |
|
| 211 |
Problems fixed: |
| 212 |
|
| 213 |
- Synchronization on SMP machines was buggy |
| 214 |
|
| 215 |
v1.03 (990325) |
| 216 |
Problems fixed: |
| 217 |
|
| 218 |
- Interrupt routing on SMP machines could be incorrect |
| 219 |
|
| 220 |
v1.02 (990310) |
| 221 |
New features: |
| 222 |
|
| 223 |
- Support for kernel versions 2.2.x added |
| 224 |
- Kernel patch instead of private duplicate of kernel functions |
| 225 |
|
| 226 |
v1.01 (980812) |
| 227 |
Problems fixed: |
| 228 |
|
| 229 |
Connection hangup with telnet |
| 230 |
Slow telnet connection |
| 231 |
|
| 232 |
v1.00 beta 01 (980507) |
| 233 |
New features: |
| 234 |
|
| 235 |
None. |
| 236 |
|
| 237 |
Problems fixed: |
| 238 |
|
| 239 |
None. |
| 240 |
|
| 241 |
Known limitations: |
| 242 |
|
| 243 |
- tar archive instead of standard package format (rpm). |
| 244 |
- FDDI statistic is empty. |
| 245 |
- not tested with 2.1.xx kernels |
| 246 |
- integration in kernel not tested |
| 247 |
- not tested simultaneously with FDDI adapters from other vendors. |
| 248 |
- only X86 processors supported. |
| 249 |
- SBA (Synchronous Bandwidth Allocator) parameters can |
| 250 |
not be configured. |
| 251 |
- does not work on some COMPAQ machines. See the PCI howto |
| 252 |
document for details about this problem. |
| 253 |
- data corruption with kernel versions below 2.0.33. |