| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
===================================================== |
| 4 |
Notes on the DEC FDDIcontroller 700 (DEFZA-xx) driver |
| 5 |
===================================================== |
| 6 |
|
| 7 |
:Version: v.1.1.4 |
| 8 |
|
| 9 |
|
| 10 |
DEC FDDIcontroller 700 is DEC's first-generation TURBOchannel FDDI |
| 11 |
network card, designed in 1990 specifically for the DECstation 5000 |
| 12 |
model 200 workstation. The board is a single attachment station and |
| 13 |
it was manufactured in two variations, both of which are supported. |
| 14 |
|
| 15 |
First is the SAS MMF DEFZA-AA option, the original design implementing |
| 16 |
the standard MMF-PMD, however with a pair of ST connectors rather than |
| 17 |
the usual MIC connector. The other one is the SAS ThinWire/STP DEFZA-CA |
| 18 |
option, denoted 700-C, with the network medium selectable by a switch |
| 19 |
between the DEC proprietary ThinWire-PMD using a BNC connector and the |
| 20 |
standard STP-PMD using a DE-9F connector. This option can interface to |
| 21 |
a DECconcentrator 500 device and, in the case of the STP-PMD, also other |
| 22 |
FDDI equipment and was designed to make it easier to transition from |
| 23 |
existing IEEE 802.3 10BASE2 Ethernet and IEEE 802.5 Token Ring networks |
| 24 |
by providing means to reuse existing cabling. |
| 25 |
|
| 26 |
This driver handles any number of cards installed in a single system. |
| 27 |
They get fddi0, fddi1, etc. interface names assigned in the order of |
| 28 |
increasing TURBOchannel slot numbers. |
| 29 |
|
| 30 |
The board only supports DMA on the receive side. Transmission involves |
| 31 |
the use of PIO. As a result under a heavy transmission load there will |
| 32 |
be a significant impact on system performance. |
| 33 |
|
| 34 |
The board supports a 64-entry CAM for matching destination addresses. |
| 35 |
Two entries are preoccupied by the Directed Beacon and Ring Purger |
| 36 |
multicast addresses and the rest is used as a multicast filter. An |
| 37 |
all-multi mode is also supported for LLC frames and it is used if |
| 38 |
requested explicitly or if the CAM overflows. The promiscuous mode |
| 39 |
supports separate enables for LLC and SMT frames, but this driver |
| 40 |
doesn't support changing them individually. |
| 41 |
|
| 42 |
|
| 43 |
Known problems: |
| 44 |
|
| 45 |
None. |
| 46 |
|
| 47 |
|
| 48 |
To do: |
| 49 |
|
| 50 |
5. MAC address change. The card does not support changing the Media |
| 51 |
Access Controller's address registers but a similar effect can be |
| 52 |
achieved by adding an alias to the CAM. There is no way to disable |
| 53 |
matching against the original address though. |
| 54 |
|
| 55 |
7. Queueing incoming/outgoing SMT frames in the driver if the SMT |
| 56 |
receive/RMC transmit ring is full. (?) |
| 57 |
|
| 58 |
8. Retrieving/reporting FDDI/SNMP stats. |
| 59 |
|
| 60 |
|
| 61 |
Both success and failure reports are welcome. |
| 62 |
|
| 63 |
Maciej W. Rozycki <[email protected]> |