Debian Codegraph @

gobi-api/Gobi_2012-06-18-1054/GobiConnectionMgmt/GobiConnectionMgmtAPI.h

raw
1 /*===========================================================================
2 FILE:
3 GobiConnectionMgmtAPI.h
4
5 DESCRIPTION:
6 QUALCOMM Connection Management API for Gobi
7
8 Copyright (c) 2012, Code Aurora Forum. All rights reserved.
9
10 Redistribution and use in source and binary forms, with or without
11 modification, are permitted provided that the following conditions are met:
12 * Redistributions of source code must retain the above copyright
13 notice, this list of conditions and the following disclaimer.
14 * Redistributions in binary form must reproduce the above copyright
15 notice, this list of conditions and the following disclaimer in the
16 documentation and/or other materials provided with the distribution.
17 * Neither the name of Code Aurora Forum nor
18 the names of its contributors may be used to endorse or promote
19 products derived from this software without specific prior written
20 permission.
21
22
23 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
24 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
27 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
32 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
33 POSSIBILITY OF SUCH DAMAGE.
34 ==========================================================================*/
35
36 #ifndef GOBI_TYPEDEFS
37 #define GOBI_TYPEDEFS
38
39 // Type Definitions
40 typedef unsigned long ULONG;
41 typedef unsigned long * ULONG_PTR;
42 typedef unsigned long long ULONGLONG;
43 typedef signed char INT8;
44 typedef unsigned char UINT8;
45 typedef signed short INT16;
46 typedef unsigned short UINT16;
47 typedef signed int INT32;
48 typedef unsigned int UINT32;
49 typedef unsigned char BYTE;
50 typedef char CHAR;
51 typedef unsigned short WORD;
52 typedef unsigned short USHORT;
53 typedef const char * LPCSTR;
54
55 #ifdef WINDOWS
56 typedef signed __int64 INT64;
57 typedef unsigned __int64 UINT64;
58 #else
59 typedef signed long long INT64;
60 typedef unsigned long long UINT64;
61 #endif
62
63 #endif
64
65 /*=========================================================================*/
66 // Definitions
67 /*=========================================================================*/
68
69 // Handle to Gobi API
70 typedef ULONG_PTR GOBIHANDLE;
71
72 #ifdef __cplusplus
73 extern "C" {
74 #endif
75
76 // Geeneric callback function pointer
77 typedef void (* tFNGenericCallback)(
78 ULONG svcID,
79 ULONG msgID,
80 GOBIHANDLE handle,
81 ULONG outLen,
82 const BYTE * pOut );
83
84 #ifdef __cplusplus
85 };
86 #endif
87
88 /*=========================================================================*/
89 // Prototypes
90 /*=========================================================================*/
91
92 /*===========================================================================
93 METHOD:
94 GobiConnect
95
96 DESCRIPTION:
97 This function connects the CM API library to the specified Gobi
98 device
99
100 PARAMETERS:
101 pQMIFile [ I ] - Device interface to connect to
102 pServicesCount [I/O] - Upon input the number of QMI services to connect to,
103 upon output the number of QMI services successfully
104 connected to
105 pServices [I/O] - Upon input the array of QMI service IDs to connect
106 to, upon output the array of QMI service IDs
107 successfully connected to
108 pHandle [ O ] - The returned Gobi interface handle
109
110 RETURN VALUE:
111 ULONG - Return code
112 ===========================================================================*/
113 ULONG GobiConnect(
114 LPCSTR pInterface,
115 ULONG * pServicesCount,
116 ULONG * pServices,
117 GOBIHANDLE * pHandle );
118
119 /*===========================================================================
120 METHOD:
121 GobiCancel
122
123 DESCRIPTION:
124 This function cancels the most recent outstanding request for the
125 specified QMI service
126
127 PARAMETERS:
128 handle [ I ] - Gobi interface handle
129 svcID [ I ] - Service whose outstanding request is to be cancelled
130 pTXID [ O ] - QMI transaction ID of outstanding request
131
132 RETURN VALUE:
133 ULONG - Return code
134 ===========================================================================*/
135 ULONG GobiCancel(
136 GOBIHANDLE handle,
137 ULONG svcID,
138 ULONG * pTXID );
139
140 /*===========================================================================
141 METHOD:
142 GobiDisconnect
143
144 DESCRIPTION:
145 This function disconnects the CM API library from the currently
146 connected Gobi device
147
148 PARAMETERS:
149 handle [ I ] - Gobi interface handle
150
151 RETURN VALUE:
152 ULONG - Return code
153 ===========================================================================*/
154 ULONG GobiDisconnect( GOBIHANDLE handle );
155
156 /*===========================================================================
157 METHOD:
158 SetGenericCallback
159
160 DESCRIPTION:
161 This function enables/disables a generic callback
162
163 PARAMETERS:
164 handle [ I ] - Gobi interface handle
165 svcID [ I ] - Service ID to monitor
166 msgID [ I ] - Message ID to look for
167 pCallback [ I ] - Callback function
168
169 RETURN VALUE:
170 ULONG
171 ===========================================================================*/
172 ULONG SetGenericCallback(
173 GOBIHANDLE handle,
174 ULONG svcID,
175 ULONG msgID,
176 tFNGenericCallback pCallback );
177
178 /*===========================================================================
179 METHOD:
180 WDSReset
181
182 DESCRIPTION:
183 The function sends 'WDS/Reset Request' (0x0000)
184 and returns the response
185
186 PARAMETERS:
187 handle [ I ] - Gobi interface handle
188 to [ I ] - Timeout for transaction (in milliseconds)
189 inLen [ I ] - Reserved for future use (set to 0)
190 pIn [ I ] - Reserved for future use (set to 0)
191 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
192 contain, upon output the number of BYTEs copied
193 to pOut
194 pOut [ O ] - Output buffer
195
196 RETURN VALUE:
197 ULONG - Return code
198 ===========================================================================*/
199 ULONG WDSReset(
200 GOBIHANDLE handle,
201 ULONG to,
202 ULONG inLen,
203 const BYTE * pIn,
204 ULONG * pOutLen,
205 BYTE * pOut );
206
207 /*===========================================================================
208 METHOD:
209 WDSSetEventReport
210
211 DESCRIPTION:
212 The function sends 'WDS/Set Event Report Request' (0x0001)
213 and returns the response
214
215 PARAMETERS:
216 handle [ I ] - Gobi interface handle
217 to [ I ] - Timeout for transaction (in milliseconds)
218 inLen [ I ] - Length of input buffer
219 pIn [ I ] - Input buffer
220 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
221 contain, upon output the number of BYTEs copied
222 to pOut
223 pOut [ O ] - Output buffer
224
225 RETURN VALUE:
226 ULONG - Return code
227 ===========================================================================*/
228 ULONG WDSSetEventReport(
229 GOBIHANDLE handle,
230 ULONG to,
231 ULONG inLen,
232 const BYTE * pIn,
233 ULONG * pOutLen,
234 BYTE * pOut );
235
236 /*===========================================================================
237 METHOD:
238 WDSAbort
239
240 DESCRIPTION:
241 The function sends 'WDS/Abort Request' (0x0002)
242 and returns the response
243
244 PARAMETERS:
245 handle [ I ] - Gobi interface handle
246 to [ I ] - Timeout for transaction (in milliseconds)
247 inLen [ I ] - Length of input buffer
248 pIn [ I ] - Input buffer
249 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
250 contain, upon output the number of BYTEs copied
251 to pOut
252 pOut [ O ] - Output buffer
253
254 RETURN VALUE:
255 ULONG - Return code
256 ===========================================================================*/
257 ULONG WDSAbort(
258 GOBIHANDLE handle,
259 ULONG to,
260 ULONG inLen,
261 const BYTE * pIn,
262 ULONG * pOutLen,
263 BYTE * pOut );
264
265 /*===========================================================================
266 METHOD:
267 WDSSetIndication
268
269 DESCRIPTION:
270 The function sends 'WDS/Set Indication Request' (0x0003)
271 and returns the response
272
273 PARAMETERS:
274 handle [ I ] - Gobi interface handle
275 to [ I ] - Timeout for transaction (in milliseconds)
276 inLen [ I ] - Length of input buffer
277 pIn [ I ] - Input buffer
278 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
279 contain, upon output the number of BYTEs copied
280 to pOut
281 pOut [ O ] - Output buffer
282
283 RETURN VALUE:
284 ULONG - Return code
285 ===========================================================================*/
286 ULONG WDSSetIndication(
287 GOBIHANDLE handle,
288 ULONG to,
289 ULONG inLen,
290 const BYTE * pIn,
291 ULONG * pOutLen,
292 BYTE * pOut );
293
294 /*===========================================================================
295 METHOD:
296 WDSStartNetworkInterface
297
298 DESCRIPTION:
299 The function sends 'WDS/Start Network Interface Request' (0x0020)
300 and returns the response
301
302 PARAMETERS:
303 handle [ I ] - Gobi interface handle
304 to [ I ] - Timeout for transaction (in milliseconds)
305 inLen [ I ] - Length of input buffer
306 pIn [ I ] - Input buffer
307 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
308 contain, upon output the number of BYTEs copied
309 to pOut
310 pOut [ O ] - Output buffer
311
312 RETURN VALUE:
313 ULONG - Return code
314 ===========================================================================*/
315 ULONG WDSStartNetworkInterface(
316 GOBIHANDLE handle,
317 ULONG to,
318 ULONG inLen,
319 const BYTE * pIn,
320 ULONG * pOutLen,
321 BYTE * pOut );
322
323 /*===========================================================================
324 METHOD:
325 WDSStopNetworkInterface
326
327 DESCRIPTION:
328 The function sends 'WDS/Stop Network Interface Request' (0x0021)
329 and returns the response
330
331 PARAMETERS:
332 handle [ I ] - Gobi interface handle
333 to [ I ] - Timeout for transaction (in milliseconds)
334 inLen [ I ] - Length of input buffer
335 pIn [ I ] - Input buffer
336 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
337 contain, upon output the number of BYTEs copied
338 to pOut
339 pOut [ O ] - Output buffer
340
341 RETURN VALUE:
342 ULONG - Return code
343 ===========================================================================*/
344 ULONG WDSStopNetworkInterface(
345 GOBIHANDLE handle,
346 ULONG to,
347 ULONG inLen,
348 const BYTE * pIn,
349 ULONG * pOutLen,
350 BYTE * pOut );
351
352 /*===========================================================================
353 METHOD:
354 WDSGetPacketServiceStatus
355
356 DESCRIPTION:
357 The function sends 'WDS/Get Packet Service Status Request' (0x0022)
358 and returns the response
359
360 PARAMETERS:
361 handle [ I ] - Gobi interface handle
362 to [ I ] - Timeout for transaction (in milliseconds)
363 inLen [ I ] - Reserved for future use (set to 0)
364 pIn [ I ] - Reserved for future use (set to 0)
365 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
366 contain, upon output the number of BYTEs copied
367 to pOut
368 pOut [ O ] - Output buffer
369
370 RETURN VALUE:
371 ULONG - Return code
372 ===========================================================================*/
373 ULONG WDSGetPacketServiceStatus(
374 GOBIHANDLE handle,
375 ULONG to,
376 ULONG inLen,
377 const BYTE * pIn,
378 ULONG * pOutLen,
379 BYTE * pOut );
380
381 /*===========================================================================
382 METHOD:
383 WDSGetChannelRates
384
385 DESCRIPTION:
386 The function sends 'WDS/Get Channel Rates Request' (0x0023)
387 and returns the response
388
389 PARAMETERS:
390 handle [ I ] - Gobi interface handle
391 to [ I ] - Timeout for transaction (in milliseconds)
392 inLen [ I ] - Reserved for future use (set to 0)
393 pIn [ I ] - Reserved for future use (set to 0)
394 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
395 contain, upon output the number of BYTEs copied
396 to pOut
397 pOut [ O ] - Output buffer
398
399 RETURN VALUE:
400 ULONG - Return code
401 ===========================================================================*/
402 ULONG WDSGetChannelRates(
403 GOBIHANDLE handle,
404 ULONG to,
405 ULONG inLen,
406 const BYTE * pIn,
407 ULONG * pOutLen,
408 BYTE * pOut );
409
410 /*===========================================================================
411 METHOD:
412 WDSGetPacketStatistics
413
414 DESCRIPTION:
415 The function sends 'WDS/Get Packet Statistics Request' (0x0024)
416 and returns the response
417
418 PARAMETERS:
419 handle [ I ] - Gobi interface handle
420 to [ I ] - Timeout for transaction (in milliseconds)
421 inLen [ I ] - Length of input buffer
422 pIn [ I ] - Input buffer
423 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
424 contain, upon output the number of BYTEs copied
425 to pOut
426 pOut [ O ] - Output buffer
427
428 RETURN VALUE:
429 ULONG - Return code
430 ===========================================================================*/
431 ULONG WDSGetPacketStatistics(
432 GOBIHANDLE handle,
433 ULONG to,
434 ULONG inLen,
435 const BYTE * pIn,
436 ULONG * pOutLen,
437 BYTE * pOut );
438
439 /*===========================================================================
440 METHOD:
441 WDSGoDormant
442
443 DESCRIPTION:
444 The function sends 'WDS/Go Dormant Request' (0x0025)
445 and returns the response
446
447 PARAMETERS:
448 handle [ I ] - Gobi interface handle
449 to [ I ] - Timeout for transaction (in milliseconds)
450 inLen [ I ] - Reserved for future use (set to 0)
451 pIn [ I ] - Reserved for future use (set to 0)
452 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
453 contain, upon output the number of BYTEs copied
454 to pOut
455 pOut [ O ] - Output buffer
456
457 RETURN VALUE:
458 ULONG - Return code
459 ===========================================================================*/
460 ULONG WDSGoDormant(
461 GOBIHANDLE handle,
462 ULONG to,
463 ULONG inLen,
464 const BYTE * pIn,
465 ULONG * pOutLen,
466 BYTE * pOut );
467
468 /*===========================================================================
469 METHOD:
470 WDSGoActive
471
472 DESCRIPTION:
473 The function sends 'WDS/Go Active Request' (0x0026)
474 and returns the response
475
476 PARAMETERS:
477 handle [ I ] - Gobi interface handle
478 to [ I ] - Timeout for transaction (in milliseconds)
479 inLen [ I ] - Reserved for future use (set to 0)
480 pIn [ I ] - Reserved for future use (set to 0)
481 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
482 contain, upon output the number of BYTEs copied
483 to pOut
484 pOut [ O ] - Output buffer
485
486 RETURN VALUE:
487 ULONG - Return code
488 ===========================================================================*/
489 ULONG WDSGoActive(
490 GOBIHANDLE handle,
491 ULONG to,
492 ULONG inLen,
493 const BYTE * pIn,
494 ULONG * pOutLen,
495 BYTE * pOut );
496
497 /*===========================================================================
498 METHOD:
499 WDSCreateProfile
500
501 DESCRIPTION:
502 The function sends 'WDS/Create Profile Request' (0x0027)
503 and returns the response
504
505 PARAMETERS:
506 handle [ I ] - Gobi interface handle
507 to [ I ] - Timeout for transaction (in milliseconds)
508 inLen [ I ] - Length of input buffer
509 pIn [ I ] - Input buffer
510 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
511 contain, upon output the number of BYTEs copied
512 to pOut
513 pOut [ O ] - Output buffer
514
515 RETURN VALUE:
516 ULONG - Return code
517 ===========================================================================*/
518 ULONG WDSCreateProfile(
519 GOBIHANDLE handle,
520 ULONG to,
521 ULONG inLen,
522 const BYTE * pIn,
523 ULONG * pOutLen,
524 BYTE * pOut );
525
526 /*===========================================================================
527 METHOD:
528 WDSModifyProfile
529
530 DESCRIPTION:
531 The function sends 'WDS/Modify Profile Request' (0x0028)
532 and returns the response
533
534 PARAMETERS:
535 handle [ I ] - Gobi interface handle
536 to [ I ] - Timeout for transaction (in milliseconds)
537 inLen [ I ] - Length of input buffer
538 pIn [ I ] - Input buffer
539 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
540 contain, upon output the number of BYTEs copied
541 to pOut
542 pOut [ O ] - Output buffer
543
544 RETURN VALUE:
545 ULONG - Return code
546 ===========================================================================*/
547 ULONG WDSModifyProfile(
548 GOBIHANDLE handle,
549 ULONG to,
550 ULONG inLen,
551 const BYTE * pIn,
552 ULONG * pOutLen,
553 BYTE * pOut );
554
555 /*===========================================================================
556 METHOD:
557 WDSDeleteProfile
558
559 DESCRIPTION:
560 The function sends 'WDS/Delete Profile Request' (0x0029)
561 and returns the response
562
563 PARAMETERS:
564 handle [ I ] - Gobi interface handle
565 to [ I ] - Timeout for transaction (in milliseconds)
566 inLen [ I ] - Length of input buffer
567 pIn [ I ] - Input buffer
568 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
569 contain, upon output the number of BYTEs copied
570 to pOut
571 pOut [ O ] - Output buffer
572
573 RETURN VALUE:
574 ULONG - Return code
575 ===========================================================================*/
576 ULONG WDSDeleteProfile(
577 GOBIHANDLE handle,
578 ULONG to,
579 ULONG inLen,
580 const BYTE * pIn,
581 ULONG * pOutLen,
582 BYTE * pOut );
583
584 /*===========================================================================
585 METHOD:
586 WDSGetProfileList
587
588 DESCRIPTION:
589 The function sends 'WDS/Get Profile List Request' (0x002A)
590 and returns the response
591
592 PARAMETERS:
593 handle [ I ] - Gobi interface handle
594 to [ I ] - Timeout for transaction (in milliseconds)
595 inLen [ I ] - Length of input buffer
596 pIn [ I ] - Input buffer
597 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
598 contain, upon output the number of BYTEs copied
599 to pOut
600 pOut [ O ] - Output buffer
601
602 RETURN VALUE:
603 ULONG - Return code
604 ===========================================================================*/
605 ULONG WDSGetProfileList(
606 GOBIHANDLE handle,
607 ULONG to,
608 ULONG inLen,
609 const BYTE * pIn,
610 ULONG * pOutLen,
611 BYTE * pOut );
612
613 /*===========================================================================
614 METHOD:
615 WDSGetProfileSettings
616
617 DESCRIPTION:
618 The function sends 'WDS/Get Profile Settings Request' (0x002B)
619 and returns the response
620
621 PARAMETERS:
622 handle [ I ] - Gobi interface handle
623 to [ I ] - Timeout for transaction (in milliseconds)
624 inLen [ I ] - Length of input buffer
625 pIn [ I ] - Input buffer
626 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
627 contain, upon output the number of BYTEs copied
628 to pOut
629 pOut [ O ] - Output buffer
630
631 RETURN VALUE:
632 ULONG - Return code
633 ===========================================================================*/
634 ULONG WDSGetProfileSettings(
635 GOBIHANDLE handle,
636 ULONG to,
637 ULONG inLen,
638 const BYTE * pIn,
639 ULONG * pOutLen,
640 BYTE * pOut );
641
642 /*===========================================================================
643 METHOD:
644 WDSGetDefaultSettings
645
646 DESCRIPTION:
647 The function sends 'WDS/Get Default Settings Request' (0x002C)
648 and returns the response
649
650 PARAMETERS:
651 handle [ I ] - Gobi interface handle
652 to [ I ] - Timeout for transaction (in milliseconds)
653 inLen [ I ] - Length of input buffer
654 pIn [ I ] - Input buffer
655 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
656 contain, upon output the number of BYTEs copied
657 to pOut
658 pOut [ O ] - Output buffer
659
660 RETURN VALUE:
661 ULONG - Return code
662 ===========================================================================*/
663 ULONG WDSGetDefaultSettings(
664 GOBIHANDLE handle,
665 ULONG to,
666 ULONG inLen,
667 const BYTE * pIn,
668 ULONG * pOutLen,
669 BYTE * pOut );
670
671 /*===========================================================================
672 METHOD:
673 WDSGetCurrentSettings
674
675 DESCRIPTION:
676 The function sends 'WDS/Get Current Settings Request' (0x002D)
677 and returns the response
678
679 PARAMETERS:
680 handle [ I ] - Gobi interface handle
681 to [ I ] - Timeout for transaction (in milliseconds)
682 inLen [ I ] - Length of input buffer
683 pIn [ I ] - Input buffer
684 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
685 contain, upon output the number of BYTEs copied
686 to pOut
687 pOut [ O ] - Output buffer
688
689 RETURN VALUE:
690 ULONG - Return code
691 ===========================================================================*/
692 ULONG WDSGetCurrentSettings(
693 GOBIHANDLE handle,
694 ULONG to,
695 ULONG inLen,
696 const BYTE * pIn,
697 ULONG * pOutLen,
698 BYTE * pOut );
699
700 /*===========================================================================
701 METHOD:
702 WDSSetMIPMode
703
704 DESCRIPTION:
705 The function sends 'WDS/Set MIP Mode Request' (0x002E)
706 and returns the response
707
708 PARAMETERS:
709 handle [ I ] - Gobi interface handle
710 to [ I ] - Timeout for transaction (in milliseconds)
711 inLen [ I ] - Length of input buffer
712 pIn [ I ] - Input buffer
713 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
714 contain, upon output the number of BYTEs copied
715 to pOut
716 pOut [ O ] - Output buffer
717
718 RETURN VALUE:
719 ULONG - Return code
720 ===========================================================================*/
721 ULONG WDSSetMIPMode(
722 GOBIHANDLE handle,
723 ULONG to,
724 ULONG inLen,
725 const BYTE * pIn,
726 ULONG * pOutLen,
727 BYTE * pOut );
728
729 /*===========================================================================
730 METHOD:
731 WDSGetMIPMode
732
733 DESCRIPTION:
734 The function sends 'WDS/Get MIP Mode Request' (0x002F)
735 and returns the response
736
737 PARAMETERS:
738 handle [ I ] - Gobi interface handle
739 to [ I ] - Timeout for transaction (in milliseconds)
740 inLen [ I ] - Reserved for future use (set to 0)
741 pIn [ I ] - Reserved for future use (set to 0)
742 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
743 contain, upon output the number of BYTEs copied
744 to pOut
745 pOut [ O ] - Output buffer
746
747 RETURN VALUE:
748 ULONG - Return code
749 ===========================================================================*/
750 ULONG WDSGetMIPMode(
751 GOBIHANDLE handle,
752 ULONG to,
753 ULONG inLen,
754 const BYTE * pIn,
755 ULONG * pOutLen,
756 BYTE * pOut );
757
758 /*===========================================================================
759 METHOD:
760 WDSGetDormancy
761
762 DESCRIPTION:
763 The function sends 'WDS/Get Dormancy Request' (0x0030)
764 and returns the response
765
766 PARAMETERS:
767 handle [ I ] - Gobi interface handle
768 to [ I ] - Timeout for transaction (in milliseconds)
769 inLen [ I ] - Reserved for future use (set to 0)
770 pIn [ I ] - Reserved for future use (set to 0)
771 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
772 contain, upon output the number of BYTEs copied
773 to pOut
774 pOut [ O ] - Output buffer
775
776 RETURN VALUE:
777 ULONG - Return code
778 ===========================================================================*/
779 ULONG WDSGetDormancy(
780 GOBIHANDLE handle,
781 ULONG to,
782 ULONG inLen,
783 const BYTE * pIn,
784 ULONG * pOutLen,
785 BYTE * pOut );
786
787 /*===========================================================================
788 METHOD:
789 WDSGetAutoconnectSetting
790
791 DESCRIPTION:
792 The function sends 'WDS/Get Autoconnect Setting Request' (0x0034)
793 and returns the response
794
795 PARAMETERS:
796 handle [ I ] - Gobi interface handle
797 to [ I ] - Timeout for transaction (in milliseconds)
798 inLen [ I ] - Reserved for future use (set to 0)
799 pIn [ I ] - Reserved for future use (set to 0)
800 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
801 contain, upon output the number of BYTEs copied
802 to pOut
803 pOut [ O ] - Output buffer
804
805 RETURN VALUE:
806 ULONG - Return code
807 ===========================================================================*/
808 ULONG WDSGetAutoconnectSetting(
809 GOBIHANDLE handle,
810 ULONG to,
811 ULONG inLen,
812 const BYTE * pIn,
813 ULONG * pOutLen,
814 BYTE * pOut );
815
816 /*===========================================================================
817 METHOD:
818 WDSGetDataSessionDuration
819
820 DESCRIPTION:
821 The function sends 'WDS/Get Data Session Duration Request' (0x0035)
822 and returns the response
823
824 PARAMETERS:
825 handle [ I ] - Gobi interface handle
826 to [ I ] - Timeout for transaction (in milliseconds)
827 inLen [ I ] - Reserved for future use (set to 0)
828 pIn [ I ] - Reserved for future use (set to 0)
829 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
830 contain, upon output the number of BYTEs copied
831 to pOut
832 pOut [ O ] - Output buffer
833
834 RETURN VALUE:
835 ULONG - Return code
836 ===========================================================================*/
837 ULONG WDSGetDataSessionDuration(
838 GOBIHANDLE handle,
839 ULONG to,
840 ULONG inLen,
841 const BYTE * pIn,
842 ULONG * pOutLen,
843 BYTE * pOut );
844
845 /*===========================================================================
846 METHOD:
847 WDSGetModemStatus
848
849 DESCRIPTION:
850 The function sends 'WDS/Get Modem Status Request' (0x0036)
851 and returns the response
852
853 PARAMETERS:
854 handle [ I ] - Gobi interface handle
855 to [ I ] - Timeout for transaction (in milliseconds)
856 inLen [ I ] - Reserved for future use (set to 0)
857 pIn [ I ] - Reserved for future use (set to 0)
858 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
859 contain, upon output the number of BYTEs copied
860 to pOut
861 pOut [ O ] - Output buffer
862
863 RETURN VALUE:
864 ULONG - Return code
865 ===========================================================================*/
866 ULONG WDSGetModemStatus(
867 GOBIHANDLE handle,
868 ULONG to,
869 ULONG inLen,
870 const BYTE * pIn,
871 ULONG * pOutLen,
872 BYTE * pOut );
873
874 /*===========================================================================
875 METHOD:
876 WDSGetDataBearerTechnology
877
878 DESCRIPTION:
879 The function sends 'WDS/Get Data Bearer Technology Request' (0x0037)
880 and returns the response
881
882 PARAMETERS:
883 handle [ I ] - Gobi interface handle
884 to [ I ] - Timeout for transaction (in milliseconds)
885 inLen [ I ] - Reserved for future use (set to 0)
886 pIn [ I ] - Reserved for future use (set to 0)
887 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
888 contain, upon output the number of BYTEs copied
889 to pOut
890 pOut [ O ] - Output buffer
891
892 RETURN VALUE:
893 ULONG - Return code
894 ===========================================================================*/
895 ULONG WDSGetDataBearerTechnology(
896 GOBIHANDLE handle,
897 ULONG to,
898 ULONG inLen,
899 const BYTE * pIn,
900 ULONG * pOutLen,
901 BYTE * pOut );
902
903 /*===========================================================================
904 METHOD:
905 WDSGetModemInfo
906
907 DESCRIPTION:
908 The function sends 'WDS/Get Modem Info Request' (0x0038)
909 and returns the response
910
911 PARAMETERS:
912 handle [ I ] - Gobi interface handle
913 to [ I ] - Timeout for transaction (in milliseconds)
914 inLen [ I ] - Length of input buffer
915 pIn [ I ] - Input buffer
916 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
917 contain, upon output the number of BYTEs copied
918 to pOut
919 pOut [ O ] - Output buffer
920
921 RETURN VALUE:
922 ULONG - Return code
923 ===========================================================================*/
924 ULONG WDSGetModemInfo(
925 GOBIHANDLE handle,
926 ULONG to,
927 ULONG inLen,
928 const BYTE * pIn,
929 ULONG * pOutLen,
930 BYTE * pOut );
931
932 /*===========================================================================
933 METHOD:
934 WDSGetActiveMIPProfile
935
936 DESCRIPTION:
937 The function sends 'WDS/Get Active MIP Profile Request' (0x003C)
938 and returns the response
939
940 PARAMETERS:
941 handle [ I ] - Gobi interface handle
942 to [ I ] - Timeout for transaction (in milliseconds)
943 inLen [ I ] - Reserved for future use (set to 0)
944 pIn [ I ] - Reserved for future use (set to 0)
945 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
946 contain, upon output the number of BYTEs copied
947 to pOut
948 pOut [ O ] - Output buffer
949
950 RETURN VALUE:
951 ULONG - Return code
952 ===========================================================================*/
953 ULONG WDSGetActiveMIPProfile(
954 GOBIHANDLE handle,
955 ULONG to,
956 ULONG inLen,
957 const BYTE * pIn,
958 ULONG * pOutLen,
959 BYTE * pOut );
960
961 /*===========================================================================
962 METHOD:
963 WDSSetActiveMIPProfile
964
965 DESCRIPTION:
966 The function sends 'WDS/Set Active MIP Profile Request' (0x003D)
967 and returns the response
968
969 PARAMETERS:
970 handle [ I ] - Gobi interface handle
971 to [ I ] - Timeout for transaction (in milliseconds)
972 inLen [ I ] - Length of input buffer
973 pIn [ I ] - Input buffer
974 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
975 contain, upon output the number of BYTEs copied
976 to pOut
977 pOut [ O ] - Output buffer
978
979 RETURN VALUE:
980 ULONG - Return code
981 ===========================================================================*/
982 ULONG WDSSetActiveMIPProfile(
983 GOBIHANDLE handle,
984 ULONG to,
985 ULONG inLen,
986 const BYTE * pIn,
987 ULONG * pOutLen,
988 BYTE * pOut );
989
990 /*===========================================================================
991 METHOD:
992 WDSGetMIPProfile
993
994 DESCRIPTION:
995 The function sends 'WDS/Get MIP Profile Request' (0x003E)
996 and returns the response
997
998 PARAMETERS:
999 handle [ I ] - Gobi interface handle
1000 to [ I ] - Timeout for transaction (in milliseconds)
1001 inLen [ I ] - Length of input buffer
1002 pIn [ I ] - Input buffer
1003 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1004 contain, upon output the number of BYTEs copied
1005 to pOut
1006 pOut [ O ] - Output buffer
1007
1008 RETURN VALUE:
1009 ULONG - Return code
1010 ===========================================================================*/
1011 ULONG WDSGetMIPProfile(
1012 GOBIHANDLE handle,
1013 ULONG to,
1014 ULONG inLen,
1015 const BYTE * pIn,
1016 ULONG * pOutLen,
1017 BYTE * pOut );
1018
1019 /*===========================================================================
1020 METHOD:
1021 WDSSetMIPProfile
1022
1023 DESCRIPTION:
1024 The function sends 'WDS/Set MIP Profile Request' (0x003F)
1025 and returns the response
1026
1027 PARAMETERS:
1028 handle [ I ] - Gobi interface handle
1029 to [ I ] - Timeout for transaction (in milliseconds)
1030 inLen [ I ] - Length of input buffer
1031 pIn [ I ] - Input buffer
1032 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1033 contain, upon output the number of BYTEs copied
1034 to pOut
1035 pOut [ O ] - Output buffer
1036
1037 RETURN VALUE:
1038 ULONG - Return code
1039 ===========================================================================*/
1040 ULONG WDSSetMIPProfile(
1041 GOBIHANDLE handle,
1042 ULONG to,
1043 ULONG inLen,
1044 const BYTE * pIn,
1045 ULONG * pOutLen,
1046 BYTE * pOut );
1047
1048 /*===========================================================================
1049 METHOD:
1050 WDSGetMIPParameters
1051
1052 DESCRIPTION:
1053 The function sends 'WDS/Get MIP Parameters Request' (0x0040)
1054 and returns the response
1055
1056 PARAMETERS:
1057 handle [ I ] - Gobi interface handle
1058 to [ I ] - Timeout for transaction (in milliseconds)
1059 inLen [ I ] - Reserved for future use (set to 0)
1060 pIn [ I ] - Reserved for future use (set to 0)
1061 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1062 contain, upon output the number of BYTEs copied
1063 to pOut
1064 pOut [ O ] - Output buffer
1065
1066 RETURN VALUE:
1067 ULONG - Return code
1068 ===========================================================================*/
1069 ULONG WDSGetMIPParameters(
1070 GOBIHANDLE handle,
1071 ULONG to,
1072 ULONG inLen,
1073 const BYTE * pIn,
1074 ULONG * pOutLen,
1075 BYTE * pOut );
1076
1077 /*===========================================================================
1078 METHOD:
1079 WDSSetMIPParameters
1080
1081 DESCRIPTION:
1082 The function sends 'WDS/Set MIP Parameters Request' (0x0041)
1083 and returns the response
1084
1085 PARAMETERS:
1086 handle [ I ] - Gobi interface handle
1087 to [ I ] - Timeout for transaction (in milliseconds)
1088 inLen [ I ] - Length of input buffer
1089 pIn [ I ] - Input buffer
1090 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1091 contain, upon output the number of BYTEs copied
1092 to pOut
1093 pOut [ O ] - Output buffer
1094
1095 RETURN VALUE:
1096 ULONG - Return code
1097 ===========================================================================*/
1098 ULONG WDSSetMIPParameters(
1099 GOBIHANDLE handle,
1100 ULONG to,
1101 ULONG inLen,
1102 const BYTE * pIn,
1103 ULONG * pOutLen,
1104 BYTE * pOut );
1105
1106 /*===========================================================================
1107 METHOD:
1108 WDSGetLastMIPStatus
1109
1110 DESCRIPTION:
1111 The function sends 'WDS/Get Last MIP Status Request' (0x0042)
1112 and returns the response
1113
1114 PARAMETERS:
1115 handle [ I ] - Gobi interface handle
1116 to [ I ] - Timeout for transaction (in milliseconds)
1117 inLen [ I ] - Reserved for future use (set to 0)
1118 pIn [ I ] - Reserved for future use (set to 0)
1119 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1120 contain, upon output the number of BYTEs copied
1121 to pOut
1122 pOut [ O ] - Output buffer
1123
1124 RETURN VALUE:
1125 ULONG - Return code
1126 ===========================================================================*/
1127 ULONG WDSGetLastMIPStatus(
1128 GOBIHANDLE handle,
1129 ULONG to,
1130 ULONG inLen,
1131 const BYTE * pIn,
1132 ULONG * pOutLen,
1133 BYTE * pOut );
1134
1135 /*===========================================================================
1136 METHOD:
1137 WDSGetANAAAAuthenticationStatus
1138
1139 DESCRIPTION:
1140 The function sends 'WDS/Get AN-AAA Authentication Status Request' (0x0043)
1141 and returns the response
1142
1143 PARAMETERS:
1144 handle [ I ] - Gobi interface handle
1145 to [ I ] - Timeout for transaction (in milliseconds)
1146 inLen [ I ] - Reserved for future use (set to 0)
1147 pIn [ I ] - Reserved for future use (set to 0)
1148 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1149 contain, upon output the number of BYTEs copied
1150 to pOut
1151 pOut [ O ] - Output buffer
1152
1153 RETURN VALUE:
1154 ULONG - Return code
1155 ===========================================================================*/
1156 ULONG WDSGetANAAAAuthenticationStatus(
1157 GOBIHANDLE handle,
1158 ULONG to,
1159 ULONG inLen,
1160 const BYTE * pIn,
1161 ULONG * pOutLen,
1162 BYTE * pOut );
1163
1164 /*===========================================================================
1165 METHOD:
1166 WDSGetCurrentDataBearerTechnology
1167
1168 DESCRIPTION:
1169 The function sends 'WDS/Get Current Data Bearer Technology Request' (0x0044)
1170 and returns the response
1171
1172 PARAMETERS:
1173 handle [ I ] - Gobi interface handle
1174 to [ I ] - Timeout for transaction (in milliseconds)
1175 inLen [ I ] - Reserved for future use (set to 0)
1176 pIn [ I ] - Reserved for future use (set to 0)
1177 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1178 contain, upon output the number of BYTEs copied
1179 to pOut
1180 pOut [ O ] - Output buffer
1181
1182 RETURN VALUE:
1183 ULONG - Return code
1184 ===========================================================================*/
1185 ULONG WDSGetCurrentDataBearerTechnology(
1186 GOBIHANDLE handle,
1187 ULONG to,
1188 ULONG inLen,
1189 const BYTE * pIn,
1190 ULONG * pOutLen,
1191 BYTE * pOut );
1192
1193 /*===========================================================================
1194 METHOD:
1195 WDSGetCallList
1196
1197 DESCRIPTION:
1198 The function sends 'WDS/Get Call List Request' (0x0045)
1199 and returns the response
1200
1201 PARAMETERS:
1202 handle [ I ] - Gobi interface handle
1203 to [ I ] - Timeout for transaction (in milliseconds)
1204 inLen [ I ] - Length of input buffer
1205 pIn [ I ] - Input buffer
1206 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1207 contain, upon output the number of BYTEs copied
1208 to pOut
1209 pOut [ O ] - Output buffer
1210
1211 RETURN VALUE:
1212 ULONG - Return code
1213 ===========================================================================*/
1214 ULONG WDSGetCallList(
1215 GOBIHANDLE handle,
1216 ULONG to,
1217 ULONG inLen,
1218 const BYTE * pIn,
1219 ULONG * pOutLen,
1220 BYTE * pOut );
1221
1222 /*===========================================================================
1223 METHOD:
1224 WDSGetCallRecord
1225
1226 DESCRIPTION:
1227 The function sends 'WDS/Get Call Record Request' (0x0046)
1228 and returns the response
1229
1230 PARAMETERS:
1231 handle [ I ] - Gobi interface handle
1232 to [ I ] - Timeout for transaction (in milliseconds)
1233 inLen [ I ] - Length of input buffer
1234 pIn [ I ] - Input buffer
1235 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1236 contain, upon output the number of BYTEs copied
1237 to pOut
1238 pOut [ O ] - Output buffer
1239
1240 RETURN VALUE:
1241 ULONG - Return code
1242 ===========================================================================*/
1243 ULONG WDSGetCallRecord(
1244 GOBIHANDLE handle,
1245 ULONG to,
1246 ULONG inLen,
1247 const BYTE * pIn,
1248 ULONG * pOutLen,
1249 BYTE * pOut );
1250
1251 /*===========================================================================
1252 METHOD:
1253 WDSClearCallList
1254
1255 DESCRIPTION:
1256 The function sends 'WDS/Clear Call List Request' (0x0047)
1257 and returns the response
1258
1259 PARAMETERS:
1260 handle [ I ] - Gobi interface handle
1261 to [ I ] - Timeout for transaction (in milliseconds)
1262 inLen [ I ] - Reserved for future use (set to 0)
1263 pIn [ I ] - Reserved for future use (set to 0)
1264 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1265 contain, upon output the number of BYTEs copied
1266 to pOut
1267 pOut [ O ] - Output buffer
1268
1269 RETURN VALUE:
1270 ULONG - Return code
1271 ===========================================================================*/
1272 ULONG WDSClearCallList(
1273 GOBIHANDLE handle,
1274 ULONG to,
1275 ULONG inLen,
1276 const BYTE * pIn,
1277 ULONG * pOutLen,
1278 BYTE * pOut );
1279
1280 /*===========================================================================
1281 METHOD:
1282 WDSGetCallListMaxSize
1283
1284 DESCRIPTION:
1285 The function sends 'WDS/Get Call List Max Size Request' (0x0048)
1286 and returns the response
1287
1288 PARAMETERS:
1289 handle [ I ] - Gobi interface handle
1290 to [ I ] - Timeout for transaction (in milliseconds)
1291 inLen [ I ] - Reserved for future use (set to 0)
1292 pIn [ I ] - Reserved for future use (set to 0)
1293 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1294 contain, upon output the number of BYTEs copied
1295 to pOut
1296 pOut [ O ] - Output buffer
1297
1298 RETURN VALUE:
1299 ULONG - Return code
1300 ===========================================================================*/
1301 ULONG WDSGetCallListMaxSize(
1302 GOBIHANDLE handle,
1303 ULONG to,
1304 ULONG inLen,
1305 const BYTE * pIn,
1306 ULONG * pOutLen,
1307 BYTE * pOut );
1308
1309 /*===========================================================================
1310 METHOD:
1311 WDSGetDefaultProfileNumber
1312
1313 DESCRIPTION:
1314 The function sends 'WDS/Get Default Profile Number Request' (0x0049)
1315 and returns the response
1316
1317 PARAMETERS:
1318 handle [ I ] - Gobi interface handle
1319 to [ I ] - Timeout for transaction (in milliseconds)
1320 inLen [ I ] - Length of input buffer
1321 pIn [ I ] - Input buffer
1322 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1323 contain, upon output the number of BYTEs copied
1324 to pOut
1325 pOut [ O ] - Output buffer
1326
1327 RETURN VALUE:
1328 ULONG - Return code
1329 ===========================================================================*/
1330 ULONG WDSGetDefaultProfileNumber(
1331 GOBIHANDLE handle,
1332 ULONG to,
1333 ULONG inLen,
1334 const BYTE * pIn,
1335 ULONG * pOutLen,
1336 BYTE * pOut );
1337
1338 /*===========================================================================
1339 METHOD:
1340 WDSSetDefaultProfileNumber
1341
1342 DESCRIPTION:
1343 The function sends 'WDS/Set Default Profile Number Request' (0x004A)
1344 and returns the response
1345
1346 PARAMETERS:
1347 handle [ I ] - Gobi interface handle
1348 to [ I ] - Timeout for transaction (in milliseconds)
1349 inLen [ I ] - Length of input buffer
1350 pIn [ I ] - Input buffer
1351 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1352 contain, upon output the number of BYTEs copied
1353 to pOut
1354 pOut [ O ] - Output buffer
1355
1356 RETURN VALUE:
1357 ULONG - Return code
1358 ===========================================================================*/
1359 ULONG WDSSetDefaultProfileNumber(
1360 GOBIHANDLE handle,
1361 ULONG to,
1362 ULONG inLen,
1363 const BYTE * pIn,
1364 ULONG * pOutLen,
1365 BYTE * pOut );
1366
1367 /*===========================================================================
1368 METHOD:
1369 WDSResetProfile
1370
1371 DESCRIPTION:
1372 The function sends 'WDS/Reset Profile Request' (0x004B)
1373 and returns the response
1374
1375 PARAMETERS:
1376 handle [ I ] - Gobi interface handle
1377 to [ I ] - Timeout for transaction (in milliseconds)
1378 inLen [ I ] - Length of input buffer
1379 pIn [ I ] - Input buffer
1380 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1381 contain, upon output the number of BYTEs copied
1382 to pOut
1383 pOut [ O ] - Output buffer
1384
1385 RETURN VALUE:
1386 ULONG - Return code
1387 ===========================================================================*/
1388 ULONG WDSResetProfile(
1389 GOBIHANDLE handle,
1390 ULONG to,
1391 ULONG inLen,
1392 const BYTE * pIn,
1393 ULONG * pOutLen,
1394 BYTE * pOut );
1395
1396 /*===========================================================================
1397 METHOD:
1398 WDSResetProfileParamToInvalid
1399
1400 DESCRIPTION:
1401 The function sends 'WDS/Reset Profile Param To Invalid Request' (0x004C)
1402 and returns the response
1403
1404 PARAMETERS:
1405 handle [ I ] - Gobi interface handle
1406 to [ I ] - Timeout for transaction (in milliseconds)
1407 inLen [ I ] - Length of input buffer
1408 pIn [ I ] - Input buffer
1409 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1410 contain, upon output the number of BYTEs copied
1411 to pOut
1412 pOut [ O ] - Output buffer
1413
1414 RETURN VALUE:
1415 ULONG - Return code
1416 ===========================================================================*/
1417 ULONG WDSResetProfileParamToInvalid(
1418 GOBIHANDLE handle,
1419 ULONG to,
1420 ULONG inLen,
1421 const BYTE * pIn,
1422 ULONG * pOutLen,
1423 BYTE * pOut );
1424
1425 /*===========================================================================
1426 METHOD:
1427 WDSSetIPFamilyPreference
1428
1429 DESCRIPTION:
1430 The function sends 'WDS/Set IP Family Preference Request' (0x004D)
1431 and returns the response
1432
1433 PARAMETERS:
1434 handle [ I ] - Gobi interface handle
1435 to [ I ] - Timeout for transaction (in milliseconds)
1436 inLen [ I ] - Length of input buffer
1437 pIn [ I ] - Input buffer
1438 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1439 contain, upon output the number of BYTEs copied
1440 to pOut
1441 pOut [ O ] - Output buffer
1442
1443 RETURN VALUE:
1444 ULONG - Return code
1445 ===========================================================================*/
1446 ULONG WDSSetIPFamilyPreference(
1447 GOBIHANDLE handle,
1448 ULONG to,
1449 ULONG inLen,
1450 const BYTE * pIn,
1451 ULONG * pOutLen,
1452 BYTE * pOut );
1453
1454 /*===========================================================================
1455 METHOD:
1456 WDSSetFMCTunnelParameters
1457
1458 DESCRIPTION:
1459 The function sends 'WDS/Set FMC Tunnel Parameters Request' (0x004E)
1460 and returns the response
1461
1462 PARAMETERS:
1463 handle [ I ] - Gobi interface handle
1464 to [ I ] - Timeout for transaction (in milliseconds)
1465 inLen [ I ] - Length of input buffer
1466 pIn [ I ] - Input buffer
1467 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1468 contain, upon output the number of BYTEs copied
1469 to pOut
1470 pOut [ O ] - Output buffer
1471
1472 RETURN VALUE:
1473 ULONG - Return code
1474 ===========================================================================*/
1475 ULONG WDSSetFMCTunnelParameters(
1476 GOBIHANDLE handle,
1477 ULONG to,
1478 ULONG inLen,
1479 const BYTE * pIn,
1480 ULONG * pOutLen,
1481 BYTE * pOut );
1482
1483 /*===========================================================================
1484 METHOD:
1485 WDSClearFMCTunnelParameters
1486
1487 DESCRIPTION:
1488 The function sends 'WDS/Clear FMC Tunnel Parameters Request' (0x004F)
1489 and returns the response
1490
1491 PARAMETERS:
1492 handle [ I ] - Gobi interface handle
1493 to [ I ] - Timeout for transaction (in milliseconds)
1494 inLen [ I ] - Reserved for future use (set to 0)
1495 pIn [ I ] - Reserved for future use (set to 0)
1496 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1497 contain, upon output the number of BYTEs copied
1498 to pOut
1499 pOut [ O ] - Output buffer
1500
1501 RETURN VALUE:
1502 ULONG - Return code
1503 ===========================================================================*/
1504 ULONG WDSClearFMCTunnelParameters(
1505 GOBIHANDLE handle,
1506 ULONG to,
1507 ULONG inLen,
1508 const BYTE * pIn,
1509 ULONG * pOutLen,
1510 BYTE * pOut );
1511
1512 /*===========================================================================
1513 METHOD:
1514 WDSGetFMCTunnelParameters
1515
1516 DESCRIPTION:
1517 The function sends 'WDS/Get FMC Tunnel Parameters Request' (0x0050)
1518 and returns the response
1519
1520 PARAMETERS:
1521 handle [ I ] - Gobi interface handle
1522 to [ I ] - Timeout for transaction (in milliseconds)
1523 inLen [ I ] - Reserved for future use (set to 0)
1524 pIn [ I ] - Reserved for future use (set to 0)
1525 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1526 contain, upon output the number of BYTEs copied
1527 to pOut
1528 pOut [ O ] - Output buffer
1529
1530 RETURN VALUE:
1531 ULONG - Return code
1532 ===========================================================================*/
1533 ULONG WDSGetFMCTunnelParameters(
1534 GOBIHANDLE handle,
1535 ULONG to,
1536 ULONG inLen,
1537 const BYTE * pIn,
1538 ULONG * pOutLen,
1539 BYTE * pOut );
1540
1541 /*===========================================================================
1542 METHOD:
1543 WDSSetAutoconnectSetting
1544
1545 DESCRIPTION:
1546 The function sends 'WDS/Set Autoconnect Setting Request' (0x0051)
1547 and returns the response
1548
1549 PARAMETERS:
1550 handle [ I ] - Gobi interface handle
1551 to [ I ] - Timeout for transaction (in milliseconds)
1552 inLen [ I ] - Length of input buffer
1553 pIn [ I ] - Input buffer
1554 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1555 contain, upon output the number of BYTEs copied
1556 to pOut
1557 pOut [ O ] - Output buffer
1558
1559 RETURN VALUE:
1560 ULONG - Return code
1561 ===========================================================================*/
1562 ULONG WDSSetAutoconnectSetting(
1563 GOBIHANDLE handle,
1564 ULONG to,
1565 ULONG inLen,
1566 const BYTE * pIn,
1567 ULONG * pOutLen,
1568 BYTE * pOut );
1569
1570 /*===========================================================================
1571 METHOD:
1572 WDSGetDNSSetting
1573
1574 DESCRIPTION:
1575 The function sends 'WDS/Get DNS Setting Request' (0x0052)
1576 and returns the response
1577
1578 PARAMETERS:
1579 handle [ I ] - Gobi interface handle
1580 to [ I ] - Timeout for transaction (in milliseconds)
1581 inLen [ I ] - Reserved for future use (set to 0)
1582 pIn [ I ] - Reserved for future use (set to 0)
1583 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1584 contain, upon output the number of BYTEs copied
1585 to pOut
1586 pOut [ O ] - Output buffer
1587
1588 RETURN VALUE:
1589 ULONG - Return code
1590 ===========================================================================*/
1591 ULONG WDSGetDNSSetting(
1592 GOBIHANDLE handle,
1593 ULONG to,
1594 ULONG inLen,
1595 const BYTE * pIn,
1596 ULONG * pOutLen,
1597 BYTE * pOut );
1598
1599 /*===========================================================================
1600 METHOD:
1601 WDSSetDNSSetting
1602
1603 DESCRIPTION:
1604 The function sends 'WDS/Set DNS Setting Request' (0x0053)
1605 and returns the response
1606
1607 PARAMETERS:
1608 handle [ I ] - Gobi interface handle
1609 to [ I ] - Timeout for transaction (in milliseconds)
1610 inLen [ I ] - Length of input buffer
1611 pIn [ I ] - Input buffer
1612 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1613 contain, upon output the number of BYTEs copied
1614 to pOut
1615 pOut [ O ] - Output buffer
1616
1617 RETURN VALUE:
1618 ULONG - Return code
1619 ===========================================================================*/
1620 ULONG WDSSetDNSSetting(
1621 GOBIHANDLE handle,
1622 ULONG to,
1623 ULONG inLen,
1624 const BYTE * pIn,
1625 ULONG * pOutLen,
1626 BYTE * pOut );
1627
1628 /*===========================================================================
1629 METHOD:
1630 WDSGetCDMAPreDormancySettings
1631
1632 DESCRIPTION:
1633 The function sends 'WDS/Get CDMA Pre-Dormancy Settings Request' (0x0054)
1634 and returns the response
1635
1636 PARAMETERS:
1637 handle [ I ] - Gobi interface handle
1638 to [ I ] - Timeout for transaction (in milliseconds)
1639 inLen [ I ] - Reserved for future use (set to 0)
1640 pIn [ I ] - Reserved for future use (set to 0)
1641 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1642 contain, upon output the number of BYTEs copied
1643 to pOut
1644 pOut [ O ] - Output buffer
1645
1646 RETURN VALUE:
1647 ULONG - Return code
1648 ===========================================================================*/
1649 ULONG WDSGetCDMAPreDormancySettings(
1650 GOBIHANDLE handle,
1651 ULONG to,
1652 ULONG inLen,
1653 const BYTE * pIn,
1654 ULONG * pOutLen,
1655 BYTE * pOut );
1656
1657 /*===========================================================================
1658 METHOD:
1659 WDSSetCAMTimer
1660
1661 DESCRIPTION:
1662 The function sends 'WDS/Set CAM Timer Request' (0x0055)
1663 and returns the response
1664
1665 PARAMETERS:
1666 handle [ I ] - Gobi interface handle
1667 to [ I ] - Timeout for transaction (in milliseconds)
1668 inLen [ I ] - Length of input buffer
1669 pIn [ I ] - Input buffer
1670 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1671 contain, upon output the number of BYTEs copied
1672 to pOut
1673 pOut [ O ] - Output buffer
1674
1675 RETURN VALUE:
1676 ULONG - Return code
1677 ===========================================================================*/
1678 ULONG WDSSetCAMTimer(
1679 GOBIHANDLE handle,
1680 ULONG to,
1681 ULONG inLen,
1682 const BYTE * pIn,
1683 ULONG * pOutLen,
1684 BYTE * pOut );
1685
1686 /*===========================================================================
1687 METHOD:
1688 WDSGetCAMTimer
1689
1690 DESCRIPTION:
1691 The function sends 'WDS/Get CAM Timer Request' (0x0056)
1692 and returns the response
1693
1694 PARAMETERS:
1695 handle [ I ] - Gobi interface handle
1696 to [ I ] - Timeout for transaction (in milliseconds)
1697 inLen [ I ] - Reserved for future use (set to 0)
1698 pIn [ I ] - Reserved for future use (set to 0)
1699 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1700 contain, upon output the number of BYTEs copied
1701 to pOut
1702 pOut [ O ] - Output buffer
1703
1704 RETURN VALUE:
1705 ULONG - Return code
1706 ===========================================================================*/
1707 ULONG WDSGetCAMTimer(
1708 GOBIHANDLE handle,
1709 ULONG to,
1710 ULONG inLen,
1711 const BYTE * pIn,
1712 ULONG * pOutLen,
1713 BYTE * pOut );
1714
1715 /*===========================================================================
1716 METHOD:
1717 WDSSetSCRM
1718
1719 DESCRIPTION:
1720 The function sends 'WDS/Set SCRM Request' (0x0057)
1721 and returns the response
1722
1723 PARAMETERS:
1724 handle [ I ] - Gobi interface handle
1725 to [ I ] - Timeout for transaction (in milliseconds)
1726 inLen [ I ] - Length of input buffer
1727 pIn [ I ] - Input buffer
1728 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1729 contain, upon output the number of BYTEs copied
1730 to pOut
1731 pOut [ O ] - Output buffer
1732
1733 RETURN VALUE:
1734 ULONG - Return code
1735 ===========================================================================*/
1736 ULONG WDSSetSCRM(
1737 GOBIHANDLE handle,
1738 ULONG to,
1739 ULONG inLen,
1740 const BYTE * pIn,
1741 ULONG * pOutLen,
1742 BYTE * pOut );
1743
1744 /*===========================================================================
1745 METHOD:
1746 WDSGetSCRM
1747
1748 DESCRIPTION:
1749 The function sends 'WDS/Get SCRM Request' (0x0058)
1750 and returns the response
1751
1752 PARAMETERS:
1753 handle [ I ] - Gobi interface handle
1754 to [ I ] - Timeout for transaction (in milliseconds)
1755 inLen [ I ] - Reserved for future use (set to 0)
1756 pIn [ I ] - Reserved for future use (set to 0)
1757 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1758 contain, upon output the number of BYTEs copied
1759 to pOut
1760 pOut [ O ] - Output buffer
1761
1762 RETURN VALUE:
1763 ULONG - Return code
1764 ===========================================================================*/
1765 ULONG WDSGetSCRM(
1766 GOBIHANDLE handle,
1767 ULONG to,
1768 ULONG inLen,
1769 const BYTE * pIn,
1770 ULONG * pOutLen,
1771 BYTE * pOut );
1772
1773 /*===========================================================================
1774 METHOD:
1775 WDSSetRDUD
1776
1777 DESCRIPTION:
1778 The function sends 'WDS/Set RDUD Request' (0x0059)
1779 and returns the response
1780
1781 PARAMETERS:
1782 handle [ I ] - Gobi interface handle
1783 to [ I ] - Timeout for transaction (in milliseconds)
1784 inLen [ I ] - Length of input buffer
1785 pIn [ I ] - Input buffer
1786 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1787 contain, upon output the number of BYTEs copied
1788 to pOut
1789 pOut [ O ] - Output buffer
1790
1791 RETURN VALUE:
1792 ULONG - Return code
1793 ===========================================================================*/
1794 ULONG WDSSetRDUD(
1795 GOBIHANDLE handle,
1796 ULONG to,
1797 ULONG inLen,
1798 const BYTE * pIn,
1799 ULONG * pOutLen,
1800 BYTE * pOut );
1801
1802 /*===========================================================================
1803 METHOD:
1804 WDSGetRDUD
1805
1806 DESCRIPTION:
1807 The function sends 'WDS/Get RDUD Request' (0x005A)
1808 and returns the response
1809
1810 PARAMETERS:
1811 handle [ I ] - Gobi interface handle
1812 to [ I ] - Timeout for transaction (in milliseconds)
1813 inLen [ I ] - Reserved for future use (set to 0)
1814 pIn [ I ] - Reserved for future use (set to 0)
1815 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1816 contain, upon output the number of BYTEs copied
1817 to pOut
1818 pOut [ O ] - Output buffer
1819
1820 RETURN VALUE:
1821 ULONG - Return code
1822 ===========================================================================*/
1823 ULONG WDSGetRDUD(
1824 GOBIHANDLE handle,
1825 ULONG to,
1826 ULONG inLen,
1827 const BYTE * pIn,
1828 ULONG * pOutLen,
1829 BYTE * pOut );
1830
1831 /*===========================================================================
1832 METHOD:
1833 WDSGetSIPMIPCallType
1834
1835 DESCRIPTION:
1836 The function sends 'WDS/Get SIP/MIP Call Type Request' (0x005B)
1837 and returns the response
1838
1839 PARAMETERS:
1840 handle [ I ] - Gobi interface handle
1841 to [ I ] - Timeout for transaction (in milliseconds)
1842 inLen [ I ] - Reserved for future use (set to 0)
1843 pIn [ I ] - Reserved for future use (set to 0)
1844 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1845 contain, upon output the number of BYTEs copied
1846 to pOut
1847 pOut [ O ] - Output buffer
1848
1849 RETURN VALUE:
1850 ULONG - Return code
1851 ===========================================================================*/
1852 ULONG WDSGetSIPMIPCallType(
1853 GOBIHANDLE handle,
1854 ULONG to,
1855 ULONG inLen,
1856 const BYTE * pIn,
1857 ULONG * pOutLen,
1858 BYTE * pOut );
1859
1860 /*===========================================================================
1861 METHOD:
1862 WDSSetEVDOPageMonitorPeriod
1863
1864 DESCRIPTION:
1865 The function sends 'WDS/Set EV-DO Page Monitor Period Request' (0x005C)
1866 and returns the response
1867
1868 PARAMETERS:
1869 handle [ I ] - Gobi interface handle
1870 to [ I ] - Timeout for transaction (in milliseconds)
1871 inLen [ I ] - Length of input buffer
1872 pIn [ I ] - Input buffer
1873 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1874 contain, upon output the number of BYTEs copied
1875 to pOut
1876 pOut [ O ] - Output buffer
1877
1878 RETURN VALUE:
1879 ULONG - Return code
1880 ===========================================================================*/
1881 ULONG WDSSetEVDOPageMonitorPeriod(
1882 GOBIHANDLE handle,
1883 ULONG to,
1884 ULONG inLen,
1885 const BYTE * pIn,
1886 ULONG * pOutLen,
1887 BYTE * pOut );
1888
1889 /*===========================================================================
1890 METHOD:
1891 WDSSetEVDOLongSleep
1892
1893 DESCRIPTION:
1894 The function sends 'WDS/Set EV-DO Long Sleep Request' (0x005D)
1895 and returns the response
1896
1897 PARAMETERS:
1898 handle [ I ] - Gobi interface handle
1899 to [ I ] - Timeout for transaction (in milliseconds)
1900 inLen [ I ] - Length of input buffer
1901 pIn [ I ] - Input buffer
1902 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1903 contain, upon output the number of BYTEs copied
1904 to pOut
1905 pOut [ O ] - Output buffer
1906
1907 RETURN VALUE:
1908 ULONG - Return code
1909 ===========================================================================*/
1910 ULONG WDSSetEVDOLongSleep(
1911 GOBIHANDLE handle,
1912 ULONG to,
1913 ULONG inLen,
1914 const BYTE * pIn,
1915 ULONG * pOutLen,
1916 BYTE * pOut );
1917
1918 /*===========================================================================
1919 METHOD:
1920 WDSGetEVDOPageMonitorPeriod
1921
1922 DESCRIPTION:
1923 The function sends 'WDS/Get EV-DO Page Monitor Period Request' (0x005E)
1924 and returns the response
1925
1926 PARAMETERS:
1927 handle [ I ] - Gobi interface handle
1928 to [ I ] - Timeout for transaction (in milliseconds)
1929 inLen [ I ] - Reserved for future use (set to 0)
1930 pIn [ I ] - Reserved for future use (set to 0)
1931 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1932 contain, upon output the number of BYTEs copied
1933 to pOut
1934 pOut [ O ] - Output buffer
1935
1936 RETURN VALUE:
1937 ULONG - Return code
1938 ===========================================================================*/
1939 ULONG WDSGetEVDOPageMonitorPeriod(
1940 GOBIHANDLE handle,
1941 ULONG to,
1942 ULONG inLen,
1943 const BYTE * pIn,
1944 ULONG * pOutLen,
1945 BYTE * pOut );
1946
1947 /*===========================================================================
1948 METHOD:
1949 WDSGetCallThrottleInfo
1950
1951 DESCRIPTION:
1952 The function sends 'WDS/Get Call Throttle Info Request' (0x005F)
1953 and returns the response
1954
1955 PARAMETERS:
1956 handle [ I ] - Gobi interface handle
1957 to [ I ] - Timeout for transaction (in milliseconds)
1958 inLen [ I ] - Reserved for future use (set to 0)
1959 pIn [ I ] - Reserved for future use (set to 0)
1960 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1961 contain, upon output the number of BYTEs copied
1962 to pOut
1963 pOut [ O ] - Output buffer
1964
1965 RETURN VALUE:
1966 ULONG - Return code
1967 ===========================================================================*/
1968 ULONG WDSGetCallThrottleInfo(
1969 GOBIHANDLE handle,
1970 ULONG to,
1971 ULONG inLen,
1972 const BYTE * pIn,
1973 ULONG * pOutLen,
1974 BYTE * pOut );
1975
1976 /*===========================================================================
1977 METHOD:
1978 WDSGetNSAPI
1979
1980 DESCRIPTION:
1981 The function sends 'WDS/Get NSAPI Request' (0x0060)
1982 and returns the response
1983
1984 PARAMETERS:
1985 handle [ I ] - Gobi interface handle
1986 to [ I ] - Timeout for transaction (in milliseconds)
1987 inLen [ I ] - Length of input buffer
1988 pIn [ I ] - Input buffer
1989 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
1990 contain, upon output the number of BYTEs copied
1991 to pOut
1992 pOut [ O ] - Output buffer
1993
1994 RETURN VALUE:
1995 ULONG - Return code
1996 ===========================================================================*/
1997 ULONG WDSGetNSAPI(
1998 GOBIHANDLE handle,
1999 ULONG to,
2000 ULONG inLen,
2001 const BYTE * pIn,
2002 ULONG * pOutLen,
2003 BYTE * pOut );
2004
2005 /*===========================================================================
2006 METHOD:
2007 WDSSetDUNCallControlPreference
2008
2009 DESCRIPTION:
2010 The function sends 'WDS/Set DUN Call Control Preference Request' (0x0061)
2011 and returns the response
2012
2013 PARAMETERS:
2014 handle [ I ] - Gobi interface handle
2015 to [ I ] - Timeout for transaction (in milliseconds)
2016 inLen [ I ] - Length of input buffer
2017 pIn [ I ] - Input buffer
2018 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2019 contain, upon output the number of BYTEs copied
2020 to pOut
2021 pOut [ O ] - Output buffer
2022
2023 RETURN VALUE:
2024 ULONG - Return code
2025 ===========================================================================*/
2026 ULONG WDSSetDUNCallControlPreference(
2027 GOBIHANDLE handle,
2028 ULONG to,
2029 ULONG inLen,
2030 const BYTE * pIn,
2031 ULONG * pOutLen,
2032 BYTE * pOut );
2033
2034 /*===========================================================================
2035 METHOD:
2036 WDSGetDUNCallControlInfo
2037
2038 DESCRIPTION:
2039 The function sends 'WDS/Get DUN Call Control Info Request' (0x0062)
2040 and returns the response
2041
2042 PARAMETERS:
2043 handle [ I ] - Gobi interface handle
2044 to [ I ] - Timeout for transaction (in milliseconds)
2045 inLen [ I ] - Reserved for future use (set to 0)
2046 pIn [ I ] - Reserved for future use (set to 0)
2047 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2048 contain, upon output the number of BYTEs copied
2049 to pOut
2050 pOut [ O ] - Output buffer
2051
2052 RETURN VALUE:
2053 ULONG - Return code
2054 ===========================================================================*/
2055 ULONG WDSGetDUNCallControlInfo(
2056 GOBIHANDLE handle,
2057 ULONG to,
2058 ULONG inLen,
2059 const BYTE * pIn,
2060 ULONG * pOutLen,
2061 BYTE * pOut );
2062
2063 /*===========================================================================
2064 METHOD:
2065 WDSSetDUNCallControlEventReport
2066
2067 DESCRIPTION:
2068 The function sends 'WDS/Set DUN Call Control Event Report Request' (0x0063)
2069 and returns the response
2070
2071 PARAMETERS:
2072 handle [ I ] - Gobi interface handle
2073 to [ I ] - Timeout for transaction (in milliseconds)
2074 inLen [ I ] - Length of input buffer
2075 pIn [ I ] - Input buffer
2076 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2077 contain, upon output the number of BYTEs copied
2078 to pOut
2079 pOut [ O ] - Output buffer
2080
2081 RETURN VALUE:
2082 ULONG - Return code
2083 ===========================================================================*/
2084 ULONG WDSSetDUNCallControlEventReport(
2085 GOBIHANDLE handle,
2086 ULONG to,
2087 ULONG inLen,
2088 const BYTE * pIn,
2089 ULONG * pOutLen,
2090 BYTE * pOut );
2091
2092 /*===========================================================================
2093 METHOD:
2094 WDSPendingDUNCallControl
2095
2096 DESCRIPTION:
2097 The function sends 'WDS/Pending DUN Call Control Request' (0x0064)
2098 and returns the response
2099
2100 PARAMETERS:
2101 handle [ I ] - Gobi interface handle
2102 to [ I ] - Timeout for transaction (in milliseconds)
2103 inLen [ I ] - Length of input buffer
2104 pIn [ I ] - Input buffer
2105 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2106 contain, upon output the number of BYTEs copied
2107 to pOut
2108 pOut [ O ] - Output buffer
2109
2110 RETURN VALUE:
2111 ULONG - Return code
2112 ===========================================================================*/
2113 ULONG WDSPendingDUNCallControl(
2114 GOBIHANDLE handle,
2115 ULONG to,
2116 ULONG inLen,
2117 const BYTE * pIn,
2118 ULONG * pOutLen,
2119 BYTE * pOut );
2120
2121 /*===========================================================================
2122 METHOD:
2123 WDSEMBMSTMGIActivate
2124
2125 DESCRIPTION:
2126 The function sends 'WDS/EMBMS TMGI Activate Request' (0x0065)
2127 and returns the response
2128
2129 PARAMETERS:
2130 handle [ I ] - Gobi interface handle
2131 to [ I ] - Timeout for transaction (in milliseconds)
2132 inLen [ I ] - Length of input buffer
2133 pIn [ I ] - Input buffer
2134 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2135 contain, upon output the number of BYTEs copied
2136 to pOut
2137 pOut [ O ] - Output buffer
2138
2139 RETURN VALUE:
2140 ULONG - Return code
2141 ===========================================================================*/
2142 ULONG WDSEMBMSTMGIActivate(
2143 GOBIHANDLE handle,
2144 ULONG to,
2145 ULONG inLen,
2146 const BYTE * pIn,
2147 ULONG * pOutLen,
2148 BYTE * pOut );
2149
2150 /*===========================================================================
2151 METHOD:
2152 WDSEMBMSTMGIDeactivate
2153
2154 DESCRIPTION:
2155 The function sends 'WDS/EMBMS TMGI Deactivate Request' (0x0066)
2156 and returns the response
2157
2158 PARAMETERS:
2159 handle [ I ] - Gobi interface handle
2160 to [ I ] - Timeout for transaction (in milliseconds)
2161 inLen [ I ] - Length of input buffer
2162 pIn [ I ] - Input buffer
2163 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2164 contain, upon output the number of BYTEs copied
2165 to pOut
2166 pOut [ O ] - Output buffer
2167
2168 RETURN VALUE:
2169 ULONG - Return code
2170 ===========================================================================*/
2171 ULONG WDSEMBMSTMGIDeactivate(
2172 GOBIHANDLE handle,
2173 ULONG to,
2174 ULONG inLen,
2175 const BYTE * pIn,
2176 ULONG * pOutLen,
2177 BYTE * pOut );
2178
2179 /*===========================================================================
2180 METHOD:
2181 WDSEMBMSTMGIListQuery
2182
2183 DESCRIPTION:
2184 The function sends 'WDS/EMBMS TMGI List Query Request' (0x0067)
2185 and returns the response
2186
2187 PARAMETERS:
2188 handle [ I ] - Gobi interface handle
2189 to [ I ] - Timeout for transaction (in milliseconds)
2190 inLen [ I ] - Length of input buffer
2191 pIn [ I ] - Input buffer
2192 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2193 contain, upon output the number of BYTEs copied
2194 to pOut
2195 pOut [ O ] - Output buffer
2196
2197 RETURN VALUE:
2198 ULONG - Return code
2199 ===========================================================================*/
2200 ULONG WDSEMBMSTMGIListQuery(
2201 GOBIHANDLE handle,
2202 ULONG to,
2203 ULONG inLen,
2204 const BYTE * pIn,
2205 ULONG * pOutLen,
2206 BYTE * pOut );
2207
2208 /*===========================================================================
2209 METHOD:
2210 WDSGetPreferredDataSystem
2211
2212 DESCRIPTION:
2213 The function sends 'WDS/Get Preferred Data System Request' (0x0069)
2214 and returns the response
2215
2216 PARAMETERS:
2217 handle [ I ] - Gobi interface handle
2218 to [ I ] - Timeout for transaction (in milliseconds)
2219 inLen [ I ] - Reserved for future use (set to 0)
2220 pIn [ I ] - Reserved for future use (set to 0)
2221 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2222 contain, upon output the number of BYTEs copied
2223 to pOut
2224 pOut [ O ] - Output buffer
2225
2226 RETURN VALUE:
2227 ULONG - Return code
2228 ===========================================================================*/
2229 ULONG WDSGetPreferredDataSystem(
2230 GOBIHANDLE handle,
2231 ULONG to,
2232 ULONG inLen,
2233 const BYTE * pIn,
2234 ULONG * pOutLen,
2235 BYTE * pOut );
2236
2237 /*===========================================================================
2238 METHOD:
2239 WDSGetLastDataCallStatus
2240
2241 DESCRIPTION:
2242 The function sends 'WDS/Get Last Data Call Status Request' (0x006A)
2243 and returns the response
2244
2245 PARAMETERS:
2246 handle [ I ] - Gobi interface handle
2247 to [ I ] - Timeout for transaction (in milliseconds)
2248 inLen [ I ] - Reserved for future use (set to 0)
2249 pIn [ I ] - Reserved for future use (set to 0)
2250 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2251 contain, upon output the number of BYTEs copied
2252 to pOut
2253 pOut [ O ] - Output buffer
2254
2255 RETURN VALUE:
2256 ULONG - Return code
2257 ===========================================================================*/
2258 ULONG WDSGetLastDataCallStatus(
2259 GOBIHANDLE handle,
2260 ULONG to,
2261 ULONG inLen,
2262 const BYTE * pIn,
2263 ULONG * pOutLen,
2264 BYTE * pOut );
2265
2266 /*===========================================================================
2267 METHOD:
2268 WDSGetCurrentDataSystems
2269
2270 DESCRIPTION:
2271 The function sends 'WDS/Get Current Data Systems Request' (0x006B)
2272 and returns the response
2273
2274 PARAMETERS:
2275 handle [ I ] - Gobi interface handle
2276 to [ I ] - Timeout for transaction (in milliseconds)
2277 inLen [ I ] - Reserved for future use (set to 0)
2278 pIn [ I ] - Reserved for future use (set to 0)
2279 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2280 contain, upon output the number of BYTEs copied
2281 to pOut
2282 pOut [ O ] - Output buffer
2283
2284 RETURN VALUE:
2285 ULONG - Return code
2286 ===========================================================================*/
2287 ULONG WDSGetCurrentDataSystems(
2288 GOBIHANDLE handle,
2289 ULONG to,
2290 ULONG inLen,
2291 const BYTE * pIn,
2292 ULONG * pOutLen,
2293 BYTE * pOut );
2294
2295 /*===========================================================================
2296 METHOD:
2297 WDSGetPDNThrottleInfo
2298
2299 DESCRIPTION:
2300 The function sends 'WDS/Get PDN Throttle Info Request' (0x006C)
2301 and returns the response
2302
2303 PARAMETERS:
2304 handle [ I ] - Gobi interface handle
2305 to [ I ] - Timeout for transaction (in milliseconds)
2306 inLen [ I ] - Length of input buffer
2307 pIn [ I ] - Input buffer
2308 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2309 contain, upon output the number of BYTEs copied
2310 to pOut
2311 pOut [ O ] - Output buffer
2312
2313 RETURN VALUE:
2314 ULONG - Return code
2315 ===========================================================================*/
2316 ULONG WDSGetPDNThrottleInfo(
2317 GOBIHANDLE handle,
2318 ULONG to,
2319 ULONG inLen,
2320 const BYTE * pIn,
2321 ULONG * pOutLen,
2322 BYTE * pOut );
2323
2324 /*===========================================================================
2325 METHOD:
2326 WDSGetLTEAttachParameters
2327
2328 DESCRIPTION:
2329 The function sends 'WDS/Get LTE Attach Parameters Request' (0x0085)
2330 and returns the response
2331
2332 PARAMETERS:
2333 handle [ I ] - Gobi interface handle
2334 to [ I ] - Timeout for transaction (in milliseconds)
2335 inLen [ I ] - Reserved for future use (set to 0)
2336 pIn [ I ] - Reserved for future use (set to 0)
2337 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2338 contain, upon output the number of BYTEs copied
2339 to pOut
2340 pOut [ O ] - Output buffer
2341
2342 RETURN VALUE:
2343 ULONG - Return code
2344 ===========================================================================*/
2345 ULONG WDSGetLTEAttachParameters(
2346 GOBIHANDLE handle,
2347 ULONG to,
2348 ULONG inLen,
2349 const BYTE * pIn,
2350 ULONG * pOutLen,
2351 BYTE * pOut );
2352
2353 /*===========================================================================
2354 METHOD:
2355 WDSResetPacketStatistics
2356
2357 DESCRIPTION:
2358 The function sends 'WDS/Reset Packet Statistics Request' (0x0086)
2359 and returns the response
2360
2361 PARAMETERS:
2362 handle [ I ] - Gobi interface handle
2363 to [ I ] - Timeout for transaction (in milliseconds)
2364 inLen [ I ] - Reserved for future use (set to 0)
2365 pIn [ I ] - Reserved for future use (set to 0)
2366 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2367 contain, upon output the number of BYTEs copied
2368 to pOut
2369 pOut [ O ] - Output buffer
2370
2371 RETURN VALUE:
2372 ULONG - Return code
2373 ===========================================================================*/
2374 ULONG WDSResetPacketStatistics(
2375 GOBIHANDLE handle,
2376 ULONG to,
2377 ULONG inLen,
2378 const BYTE * pIn,
2379 ULONG * pOutLen,
2380 BYTE * pOut );
2381
2382 /*===========================================================================
2383 METHOD:
2384 WDSGetFlowControlStatus
2385
2386 DESCRIPTION:
2387 The function sends 'WDS/Get Flow Control Status Request' (0x0087)
2388 and returns the response
2389
2390 PARAMETERS:
2391 handle [ I ] - Gobi interface handle
2392 to [ I ] - Timeout for transaction (in milliseconds)
2393 inLen [ I ] - Reserved for future use (set to 0)
2394 pIn [ I ] - Reserved for future use (set to 0)
2395 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2396 contain, upon output the number of BYTEs copied
2397 to pOut
2398 pOut [ O ] - Output buffer
2399
2400 RETURN VALUE:
2401 ULONG - Return code
2402 ===========================================================================*/
2403 ULONG WDSGetFlowControlStatus(
2404 GOBIHANDLE handle,
2405 ULONG to,
2406 ULONG inLen,
2407 const BYTE * pIn,
2408 ULONG * pOutLen,
2409 BYTE * pOut );
2410
2411 /*===========================================================================
2412 METHOD:
2413 DMSReset
2414
2415 DESCRIPTION:
2416 The function sends 'DMS/Reset Request' (0x0000)
2417 and returns the response
2418
2419 PARAMETERS:
2420 handle [ I ] - Gobi interface handle
2421 to [ I ] - Timeout for transaction (in milliseconds)
2422 inLen [ I ] - Reserved for future use (set to 0)
2423 pIn [ I ] - Reserved for future use (set to 0)
2424 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2425 contain, upon output the number of BYTEs copied
2426 to pOut
2427 pOut [ O ] - Output buffer
2428
2429 RETURN VALUE:
2430 ULONG - Return code
2431 ===========================================================================*/
2432 ULONG DMSReset(
2433 GOBIHANDLE handle,
2434 ULONG to,
2435 ULONG inLen,
2436 const BYTE * pIn,
2437 ULONG * pOutLen,
2438 BYTE * pOut );
2439
2440 /*===========================================================================
2441 METHOD:
2442 DMSSetEventReport
2443
2444 DESCRIPTION:
2445 The function sends 'DMS/Set Event Report Request' (0x0001)
2446 and returns the response
2447
2448 PARAMETERS:
2449 handle [ I ] - Gobi interface handle
2450 to [ I ] - Timeout for transaction (in milliseconds)
2451 inLen [ I ] - Length of input buffer
2452 pIn [ I ] - Input buffer
2453 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2454 contain, upon output the number of BYTEs copied
2455 to pOut
2456 pOut [ O ] - Output buffer
2457
2458 RETURN VALUE:
2459 ULONG - Return code
2460 ===========================================================================*/
2461 ULONG DMSSetEventReport(
2462 GOBIHANDLE handle,
2463 ULONG to,
2464 ULONG inLen,
2465 const BYTE * pIn,
2466 ULONG * pOutLen,
2467 BYTE * pOut );
2468
2469 /*===========================================================================
2470 METHOD:
2471 DMSGetDeviceCapabilities
2472
2473 DESCRIPTION:
2474 The function sends 'DMS/Get Device Capabilities Request' (0x0020)
2475 and returns the response
2476
2477 PARAMETERS:
2478 handle [ I ] - Gobi interface handle
2479 to [ I ] - Timeout for transaction (in milliseconds)
2480 inLen [ I ] - Reserved for future use (set to 0)
2481 pIn [ I ] - Reserved for future use (set to 0)
2482 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2483 contain, upon output the number of BYTEs copied
2484 to pOut
2485 pOut [ O ] - Output buffer
2486
2487 RETURN VALUE:
2488 ULONG - Return code
2489 ===========================================================================*/
2490 ULONG DMSGetDeviceCapabilities(
2491 GOBIHANDLE handle,
2492 ULONG to,
2493 ULONG inLen,
2494 const BYTE * pIn,
2495 ULONG * pOutLen,
2496 BYTE * pOut );
2497
2498 /*===========================================================================
2499 METHOD:
2500 DMSGetDeviceManfacturer
2501
2502 DESCRIPTION:
2503 The function sends 'DMS/Get Device Manfacturer Request' (0x0021)
2504 and returns the response
2505
2506 PARAMETERS:
2507 handle [ I ] - Gobi interface handle
2508 to [ I ] - Timeout for transaction (in milliseconds)
2509 inLen [ I ] - Reserved for future use (set to 0)
2510 pIn [ I ] - Reserved for future use (set to 0)
2511 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2512 contain, upon output the number of BYTEs copied
2513 to pOut
2514 pOut [ O ] - Output buffer
2515
2516 RETURN VALUE:
2517 ULONG - Return code
2518 ===========================================================================*/
2519 ULONG DMSGetDeviceManfacturer(
2520 GOBIHANDLE handle,
2521 ULONG to,
2522 ULONG inLen,
2523 const BYTE * pIn,
2524 ULONG * pOutLen,
2525 BYTE * pOut );
2526
2527 /*===========================================================================
2528 METHOD:
2529 DMSGetDeviceModel
2530
2531 DESCRIPTION:
2532 The function sends 'DMS/Get Device Model Request' (0x0022)
2533 and returns the response
2534
2535 PARAMETERS:
2536 handle [ I ] - Gobi interface handle
2537 to [ I ] - Timeout for transaction (in milliseconds)
2538 inLen [ I ] - Reserved for future use (set to 0)
2539 pIn [ I ] - Reserved for future use (set to 0)
2540 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2541 contain, upon output the number of BYTEs copied
2542 to pOut
2543 pOut [ O ] - Output buffer
2544
2545 RETURN VALUE:
2546 ULONG - Return code
2547 ===========================================================================*/
2548 ULONG DMSGetDeviceModel(
2549 GOBIHANDLE handle,
2550 ULONG to,
2551 ULONG inLen,
2552 const BYTE * pIn,
2553 ULONG * pOutLen,
2554 BYTE * pOut );
2555
2556 /*===========================================================================
2557 METHOD:
2558 DMSGetDeviceRevision
2559
2560 DESCRIPTION:
2561 The function sends 'DMS/Get Device Revision Request' (0x0023)
2562 and returns the response
2563
2564 PARAMETERS:
2565 handle [ I ] - Gobi interface handle
2566 to [ I ] - Timeout for transaction (in milliseconds)
2567 inLen [ I ] - Reserved for future use (set to 0)
2568 pIn [ I ] - Reserved for future use (set to 0)
2569 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2570 contain, upon output the number of BYTEs copied
2571 to pOut
2572 pOut [ O ] - Output buffer
2573
2574 RETURN VALUE:
2575 ULONG - Return code
2576 ===========================================================================*/
2577 ULONG DMSGetDeviceRevision(
2578 GOBIHANDLE handle,
2579 ULONG to,
2580 ULONG inLen,
2581 const BYTE * pIn,
2582 ULONG * pOutLen,
2583 BYTE * pOut );
2584
2585 /*===========================================================================
2586 METHOD:
2587 DMSGetDeviceVoiceNumber
2588
2589 DESCRIPTION:
2590 The function sends 'DMS/Get Device Voice Number Request' (0x0024)
2591 and returns the response
2592
2593 PARAMETERS:
2594 handle [ I ] - Gobi interface handle
2595 to [ I ] - Timeout for transaction (in milliseconds)
2596 inLen [ I ] - Reserved for future use (set to 0)
2597 pIn [ I ] - Reserved for future use (set to 0)
2598 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2599 contain, upon output the number of BYTEs copied
2600 to pOut
2601 pOut [ O ] - Output buffer
2602
2603 RETURN VALUE:
2604 ULONG - Return code
2605 ===========================================================================*/
2606 ULONG DMSGetDeviceVoiceNumber(
2607 GOBIHANDLE handle,
2608 ULONG to,
2609 ULONG inLen,
2610 const BYTE * pIn,
2611 ULONG * pOutLen,
2612 BYTE * pOut );
2613
2614 /*===========================================================================
2615 METHOD:
2616 DMSGetDeviceSerialNumbers
2617
2618 DESCRIPTION:
2619 The function sends 'DMS/Get Device Serial Numbers Request' (0x0025)
2620 and returns the response
2621
2622 PARAMETERS:
2623 handle [ I ] - Gobi interface handle
2624 to [ I ] - Timeout for transaction (in milliseconds)
2625 inLen [ I ] - Reserved for future use (set to 0)
2626 pIn [ I ] - Reserved for future use (set to 0)
2627 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2628 contain, upon output the number of BYTEs copied
2629 to pOut
2630 pOut [ O ] - Output buffer
2631
2632 RETURN VALUE:
2633 ULONG - Return code
2634 ===========================================================================*/
2635 ULONG DMSGetDeviceSerialNumbers(
2636 GOBIHANDLE handle,
2637 ULONG to,
2638 ULONG inLen,
2639 const BYTE * pIn,
2640 ULONG * pOutLen,
2641 BYTE * pOut );
2642
2643 /*===========================================================================
2644 METHOD:
2645 DMSGetPowerState
2646
2647 DESCRIPTION:
2648 The function sends 'DMS/Get Power State Request' (0x0026)
2649 and returns the response
2650
2651 PARAMETERS:
2652 handle [ I ] - Gobi interface handle
2653 to [ I ] - Timeout for transaction (in milliseconds)
2654 inLen [ I ] - Reserved for future use (set to 0)
2655 pIn [ I ] - Reserved for future use (set to 0)
2656 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2657 contain, upon output the number of BYTEs copied
2658 to pOut
2659 pOut [ O ] - Output buffer
2660
2661 RETURN VALUE:
2662 ULONG - Return code
2663 ===========================================================================*/
2664 ULONG DMSGetPowerState(
2665 GOBIHANDLE handle,
2666 ULONG to,
2667 ULONG inLen,
2668 const BYTE * pIn,
2669 ULONG * pOutLen,
2670 BYTE * pOut );
2671
2672 /*===========================================================================
2673 METHOD:
2674 DMSUIMSetPINProtection
2675
2676 DESCRIPTION:
2677 The function sends 'DMS/UIM Set PIN Protection Request' (0x0027)
2678 and returns the response
2679
2680 PARAMETERS:
2681 handle [ I ] - Gobi interface handle
2682 to [ I ] - Timeout for transaction (in milliseconds)
2683 inLen [ I ] - Length of input buffer
2684 pIn [ I ] - Input buffer
2685 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2686 contain, upon output the number of BYTEs copied
2687 to pOut
2688 pOut [ O ] - Output buffer
2689
2690 RETURN VALUE:
2691 ULONG - Return code
2692 ===========================================================================*/
2693 ULONG DMSUIMSetPINProtection(
2694 GOBIHANDLE handle,
2695 ULONG to,
2696 ULONG inLen,
2697 const BYTE * pIn,
2698 ULONG * pOutLen,
2699 BYTE * pOut );
2700
2701 /*===========================================================================
2702 METHOD:
2703 DMSUIMVerifyPIN
2704
2705 DESCRIPTION:
2706 The function sends 'DMS/UIM Verify PIN Request' (0x0028)
2707 and returns the response
2708
2709 PARAMETERS:
2710 handle [ I ] - Gobi interface handle
2711 to [ I ] - Timeout for transaction (in milliseconds)
2712 inLen [ I ] - Length of input buffer
2713 pIn [ I ] - Input buffer
2714 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2715 contain, upon output the number of BYTEs copied
2716 to pOut
2717 pOut [ O ] - Output buffer
2718
2719 RETURN VALUE:
2720 ULONG - Return code
2721 ===========================================================================*/
2722 ULONG DMSUIMVerifyPIN(
2723 GOBIHANDLE handle,
2724 ULONG to,
2725 ULONG inLen,
2726 const BYTE * pIn,
2727 ULONG * pOutLen,
2728 BYTE * pOut );
2729
2730 /*===========================================================================
2731 METHOD:
2732 DMSUIMUnblockPIN
2733
2734 DESCRIPTION:
2735 The function sends 'DMS/UIM Unblock PIN Request' (0x0029)
2736 and returns the response
2737
2738 PARAMETERS:
2739 handle [ I ] - Gobi interface handle
2740 to [ I ] - Timeout for transaction (in milliseconds)
2741 inLen [ I ] - Length of input buffer
2742 pIn [ I ] - Input buffer
2743 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2744 contain, upon output the number of BYTEs copied
2745 to pOut
2746 pOut [ O ] - Output buffer
2747
2748 RETURN VALUE:
2749 ULONG - Return code
2750 ===========================================================================*/
2751 ULONG DMSUIMUnblockPIN(
2752 GOBIHANDLE handle,
2753 ULONG to,
2754 ULONG inLen,
2755 const BYTE * pIn,
2756 ULONG * pOutLen,
2757 BYTE * pOut );
2758
2759 /*===========================================================================
2760 METHOD:
2761 DMSUIMChangePIN
2762
2763 DESCRIPTION:
2764 The function sends 'DMS/UIM Change PIN Request' (0x002A)
2765 and returns the response
2766
2767 PARAMETERS:
2768 handle [ I ] - Gobi interface handle
2769 to [ I ] - Timeout for transaction (in milliseconds)
2770 inLen [ I ] - Length of input buffer
2771 pIn [ I ] - Input buffer
2772 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2773 contain, upon output the number of BYTEs copied
2774 to pOut
2775 pOut [ O ] - Output buffer
2776
2777 RETURN VALUE:
2778 ULONG - Return code
2779 ===========================================================================*/
2780 ULONG DMSUIMChangePIN(
2781 GOBIHANDLE handle,
2782 ULONG to,
2783 ULONG inLen,
2784 const BYTE * pIn,
2785 ULONG * pOutLen,
2786 BYTE * pOut );
2787
2788 /*===========================================================================
2789 METHOD:
2790 DMSUIMGetPINStatus
2791
2792 DESCRIPTION:
2793 The function sends 'DMS/UIM Get PIN Status Request' (0x002B)
2794 and returns the response
2795
2796 PARAMETERS:
2797 handle [ I ] - Gobi interface handle
2798 to [ I ] - Timeout for transaction (in milliseconds)
2799 inLen [ I ] - Reserved for future use (set to 0)
2800 pIn [ I ] - Reserved for future use (set to 0)
2801 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2802 contain, upon output the number of BYTEs copied
2803 to pOut
2804 pOut [ O ] - Output buffer
2805
2806 RETURN VALUE:
2807 ULONG - Return code
2808 ===========================================================================*/
2809 ULONG DMSUIMGetPINStatus(
2810 GOBIHANDLE handle,
2811 ULONG to,
2812 ULONG inLen,
2813 const BYTE * pIn,
2814 ULONG * pOutLen,
2815 BYTE * pOut );
2816
2817 /*===========================================================================
2818 METHOD:
2819 DMSGetHardwareRevision
2820
2821 DESCRIPTION:
2822 The function sends 'DMS/Get Hardware Revision Request' (0x002C)
2823 and returns the response
2824
2825 PARAMETERS:
2826 handle [ I ] - Gobi interface handle
2827 to [ I ] - Timeout for transaction (in milliseconds)
2828 inLen [ I ] - Reserved for future use (set to 0)
2829 pIn [ I ] - Reserved for future use (set to 0)
2830 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2831 contain, upon output the number of BYTEs copied
2832 to pOut
2833 pOut [ O ] - Output buffer
2834
2835 RETURN VALUE:
2836 ULONG - Return code
2837 ===========================================================================*/
2838 ULONG DMSGetHardwareRevision(
2839 GOBIHANDLE handle,
2840 ULONG to,
2841 ULONG inLen,
2842 const BYTE * pIn,
2843 ULONG * pOutLen,
2844 BYTE * pOut );
2845
2846 /*===========================================================================
2847 METHOD:
2848 DMSGetOperatingMode
2849
2850 DESCRIPTION:
2851 The function sends 'DMS/Get Operating Mode Request' (0x002D)
2852 and returns the response
2853
2854 PARAMETERS:
2855 handle [ I ] - Gobi interface handle
2856 to [ I ] - Timeout for transaction (in milliseconds)
2857 inLen [ I ] - Reserved for future use (set to 0)
2858 pIn [ I ] - Reserved for future use (set to 0)
2859 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2860 contain, upon output the number of BYTEs copied
2861 to pOut
2862 pOut [ O ] - Output buffer
2863
2864 RETURN VALUE:
2865 ULONG - Return code
2866 ===========================================================================*/
2867 ULONG DMSGetOperatingMode(
2868 GOBIHANDLE handle,
2869 ULONG to,
2870 ULONG inLen,
2871 const BYTE * pIn,
2872 ULONG * pOutLen,
2873 BYTE * pOut );
2874
2875 /*===========================================================================
2876 METHOD:
2877 DMSSetOperatingMode
2878
2879 DESCRIPTION:
2880 The function sends 'DMS/Set Operating Mode Request' (0x002E)
2881 and returns the response
2882
2883 PARAMETERS:
2884 handle [ I ] - Gobi interface handle
2885 to [ I ] - Timeout for transaction (in milliseconds)
2886 inLen [ I ] - Length of input buffer
2887 pIn [ I ] - Input buffer
2888 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2889 contain, upon output the number of BYTEs copied
2890 to pOut
2891 pOut [ O ] - Output buffer
2892
2893 RETURN VALUE:
2894 ULONG - Return code
2895 ===========================================================================*/
2896 ULONG DMSSetOperatingMode(
2897 GOBIHANDLE handle,
2898 ULONG to,
2899 ULONG inLen,
2900 const BYTE * pIn,
2901 ULONG * pOutLen,
2902 BYTE * pOut );
2903
2904 /*===========================================================================
2905 METHOD:
2906 DMSGetTimestamp
2907
2908 DESCRIPTION:
2909 The function sends 'DMS/Get Timestamp Request' (0x002F)
2910 and returns the response
2911
2912 PARAMETERS:
2913 handle [ I ] - Gobi interface handle
2914 to [ I ] - Timeout for transaction (in milliseconds)
2915 inLen [ I ] - Reserved for future use (set to 0)
2916 pIn [ I ] - Reserved for future use (set to 0)
2917 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2918 contain, upon output the number of BYTEs copied
2919 to pOut
2920 pOut [ O ] - Output buffer
2921
2922 RETURN VALUE:
2923 ULONG - Return code
2924 ===========================================================================*/
2925 ULONG DMSGetTimestamp(
2926 GOBIHANDLE handle,
2927 ULONG to,
2928 ULONG inLen,
2929 const BYTE * pIn,
2930 ULONG * pOutLen,
2931 BYTE * pOut );
2932
2933 /*===========================================================================
2934 METHOD:
2935 DMSGetPRLVersion
2936
2937 DESCRIPTION:
2938 The function sends 'DMS/Get PRL Version Request' (0x0030)
2939 and returns the response
2940
2941 PARAMETERS:
2942 handle [ I ] - Gobi interface handle
2943 to [ I ] - Timeout for transaction (in milliseconds)
2944 inLen [ I ] - Reserved for future use (set to 0)
2945 pIn [ I ] - Reserved for future use (set to 0)
2946 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2947 contain, upon output the number of BYTEs copied
2948 to pOut
2949 pOut [ O ] - Output buffer
2950
2951 RETURN VALUE:
2952 ULONG - Return code
2953 ===========================================================================*/
2954 ULONG DMSGetPRLVersion(
2955 GOBIHANDLE handle,
2956 ULONG to,
2957 ULONG inLen,
2958 const BYTE * pIn,
2959 ULONG * pOutLen,
2960 BYTE * pOut );
2961
2962 /*===========================================================================
2963 METHOD:
2964 DMSGetActivationState
2965
2966 DESCRIPTION:
2967 The function sends 'DMS/Get Activation State Request' (0x0031)
2968 and returns the response
2969
2970 PARAMETERS:
2971 handle [ I ] - Gobi interface handle
2972 to [ I ] - Timeout for transaction (in milliseconds)
2973 inLen [ I ] - Reserved for future use (set to 0)
2974 pIn [ I ] - Reserved for future use (set to 0)
2975 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
2976 contain, upon output the number of BYTEs copied
2977 to pOut
2978 pOut [ O ] - Output buffer
2979
2980 RETURN VALUE:
2981 ULONG - Return code
2982 ===========================================================================*/
2983 ULONG DMSGetActivationState(
2984 GOBIHANDLE handle,
2985 ULONG to,
2986 ULONG inLen,
2987 const BYTE * pIn,
2988 ULONG * pOutLen,
2989 BYTE * pOut );
2990
2991 /*===========================================================================
2992 METHOD:
2993 DMSActivateAutomatic
2994
2995 DESCRIPTION:
2996 The function sends 'DMS/Activate Automatic Request' (0x0032)
2997 and returns the response
2998
2999 PARAMETERS:
3000 handle [ I ] - Gobi interface handle
3001 to [ I ] - Timeout for transaction (in milliseconds)
3002 inLen [ I ] - Length of input buffer
3003 pIn [ I ] - Input buffer
3004 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3005 contain, upon output the number of BYTEs copied
3006 to pOut
3007 pOut [ O ] - Output buffer
3008
3009 RETURN VALUE:
3010 ULONG - Return code
3011 ===========================================================================*/
3012 ULONG DMSActivateAutomatic(
3013 GOBIHANDLE handle,
3014 ULONG to,
3015 ULONG inLen,
3016 const BYTE * pIn,
3017 ULONG * pOutLen,
3018 BYTE * pOut );
3019
3020 /*===========================================================================
3021 METHOD:
3022 DMSActivateManual
3023
3024 DESCRIPTION:
3025 The function sends 'DMS/Activate Manual Request' (0x0033)
3026 and returns the response
3027
3028 PARAMETERS:
3029 handle [ I ] - Gobi interface handle
3030 to [ I ] - Timeout for transaction (in milliseconds)
3031 inLen [ I ] - Length of input buffer
3032 pIn [ I ] - Input buffer
3033 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3034 contain, upon output the number of BYTEs copied
3035 to pOut
3036 pOut [ O ] - Output buffer
3037
3038 RETURN VALUE:
3039 ULONG - Return code
3040 ===========================================================================*/
3041 ULONG DMSActivateManual(
3042 GOBIHANDLE handle,
3043 ULONG to,
3044 ULONG inLen,
3045 const BYTE * pIn,
3046 ULONG * pOutLen,
3047 BYTE * pOut );
3048
3049 /*===========================================================================
3050 METHOD:
3051 DMSGetLockState
3052
3053 DESCRIPTION:
3054 The function sends 'DMS/Get Lock State Request' (0x0034)
3055 and returns the response
3056
3057 PARAMETERS:
3058 handle [ I ] - Gobi interface handle
3059 to [ I ] - Timeout for transaction (in milliseconds)
3060 inLen [ I ] - Reserved for future use (set to 0)
3061 pIn [ I ] - Reserved for future use (set to 0)
3062 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3063 contain, upon output the number of BYTEs copied
3064 to pOut
3065 pOut [ O ] - Output buffer
3066
3067 RETURN VALUE:
3068 ULONG - Return code
3069 ===========================================================================*/
3070 ULONG DMSGetLockState(
3071 GOBIHANDLE handle,
3072 ULONG to,
3073 ULONG inLen,
3074 const BYTE * pIn,
3075 ULONG * pOutLen,
3076 BYTE * pOut );
3077
3078 /*===========================================================================
3079 METHOD:
3080 DMSSetLockState
3081
3082 DESCRIPTION:
3083 The function sends 'DMS/Set Lock State Request' (0x0035)
3084 and returns the response
3085
3086 PARAMETERS:
3087 handle [ I ] - Gobi interface handle
3088 to [ I ] - Timeout for transaction (in milliseconds)
3089 inLen [ I ] - Length of input buffer
3090 pIn [ I ] - Input buffer
3091 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3092 contain, upon output the number of BYTEs copied
3093 to pOut
3094 pOut [ O ] - Output buffer
3095
3096 RETURN VALUE:
3097 ULONG - Return code
3098 ===========================================================================*/
3099 ULONG DMSSetLockState(
3100 GOBIHANDLE handle,
3101 ULONG to,
3102 ULONG inLen,
3103 const BYTE * pIn,
3104 ULONG * pOutLen,
3105 BYTE * pOut );
3106
3107 /*===========================================================================
3108 METHOD:
3109 DMSSetLockCode
3110
3111 DESCRIPTION:
3112 The function sends 'DMS/Set Lock Code Request' (0x0036)
3113 and returns the response
3114
3115 PARAMETERS:
3116 handle [ I ] - Gobi interface handle
3117 to [ I ] - Timeout for transaction (in milliseconds)
3118 inLen [ I ] - Length of input buffer
3119 pIn [ I ] - Input buffer
3120 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3121 contain, upon output the number of BYTEs copied
3122 to pOut
3123 pOut [ O ] - Output buffer
3124
3125 RETURN VALUE:
3126 ULONG - Return code
3127 ===========================================================================*/
3128 ULONG DMSSetLockCode(
3129 GOBIHANDLE handle,
3130 ULONG to,
3131 ULONG inLen,
3132 const BYTE * pIn,
3133 ULONG * pOutLen,
3134 BYTE * pOut );
3135
3136 /*===========================================================================
3137 METHOD:
3138 DMSReadUserData
3139
3140 DESCRIPTION:
3141 The function sends 'DMS/Read User Data Request' (0x0037)
3142 and returns the response
3143
3144 PARAMETERS:
3145 handle [ I ] - Gobi interface handle
3146 to [ I ] - Timeout for transaction (in milliseconds)
3147 inLen [ I ] - Reserved for future use (set to 0)
3148 pIn [ I ] - Reserved for future use (set to 0)
3149 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3150 contain, upon output the number of BYTEs copied
3151 to pOut
3152 pOut [ O ] - Output buffer
3153
3154 RETURN VALUE:
3155 ULONG - Return code
3156 ===========================================================================*/
3157 ULONG DMSReadUserData(
3158 GOBIHANDLE handle,
3159 ULONG to,
3160 ULONG inLen,
3161 const BYTE * pIn,
3162 ULONG * pOutLen,
3163 BYTE * pOut );
3164
3165 /*===========================================================================
3166 METHOD:
3167 DMSWriteUserData
3168
3169 DESCRIPTION:
3170 The function sends 'DMS/Write User Data Request' (0x0038)
3171 and returns the response
3172
3173 PARAMETERS:
3174 handle [ I ] - Gobi interface handle
3175 to [ I ] - Timeout for transaction (in milliseconds)
3176 inLen [ I ] - Length of input buffer
3177 pIn [ I ] - Input buffer
3178 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3179 contain, upon output the number of BYTEs copied
3180 to pOut
3181 pOut [ O ] - Output buffer
3182
3183 RETURN VALUE:
3184 ULONG - Return code
3185 ===========================================================================*/
3186 ULONG DMSWriteUserData(
3187 GOBIHANDLE handle,
3188 ULONG to,
3189 ULONG inLen,
3190 const BYTE * pIn,
3191 ULONG * pOutLen,
3192 BYTE * pOut );
3193
3194 /*===========================================================================
3195 METHOD:
3196 DMSReadERIData
3197
3198 DESCRIPTION:
3199 The function sends 'DMS/Read ERI Data Request' (0x0039)
3200 and returns the response
3201
3202 PARAMETERS:
3203 handle [ I ] - Gobi interface handle
3204 to [ I ] - Timeout for transaction (in milliseconds)
3205 inLen [ I ] - Reserved for future use (set to 0)
3206 pIn [ I ] - Reserved for future use (set to 0)
3207 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3208 contain, upon output the number of BYTEs copied
3209 to pOut
3210 pOut [ O ] - Output buffer
3211
3212 RETURN VALUE:
3213 ULONG - Return code
3214 ===========================================================================*/
3215 ULONG DMSReadERIData(
3216 GOBIHANDLE handle,
3217 ULONG to,
3218 ULONG inLen,
3219 const BYTE * pIn,
3220 ULONG * pOutLen,
3221 BYTE * pOut );
3222
3223 /*===========================================================================
3224 METHOD:
3225 DMSResetFactoryDefaults
3226
3227 DESCRIPTION:
3228 The function sends 'DMS/Reset Factory Defaults Request' (0x003A)
3229 and returns the response
3230
3231 PARAMETERS:
3232 handle [ I ] - Gobi interface handle
3233 to [ I ] - Timeout for transaction (in milliseconds)
3234 inLen [ I ] - Length of input buffer
3235 pIn [ I ] - Input buffer
3236 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3237 contain, upon output the number of BYTEs copied
3238 to pOut
3239 pOut [ O ] - Output buffer
3240
3241 RETURN VALUE:
3242 ULONG - Return code
3243 ===========================================================================*/
3244 ULONG DMSResetFactoryDefaults(
3245 GOBIHANDLE handle,
3246 ULONG to,
3247 ULONG inLen,
3248 const BYTE * pIn,
3249 ULONG * pOutLen,
3250 BYTE * pOut );
3251
3252 /*===========================================================================
3253 METHOD:
3254 DMSValidateSPC
3255
3256 DESCRIPTION:
3257 The function sends 'DMS/Validate SPC Request' (0x003B)
3258 and returns the response
3259
3260 PARAMETERS:
3261 handle [ I ] - Gobi interface handle
3262 to [ I ] - Timeout for transaction (in milliseconds)
3263 inLen [ I ] - Length of input buffer
3264 pIn [ I ] - Input buffer
3265 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3266 contain, upon output the number of BYTEs copied
3267 to pOut
3268 pOut [ O ] - Output buffer
3269
3270 RETURN VALUE:
3271 ULONG - Return code
3272 ===========================================================================*/
3273 ULONG DMSValidateSPC(
3274 GOBIHANDLE handle,
3275 ULONG to,
3276 ULONG inLen,
3277 const BYTE * pIn,
3278 ULONG * pOutLen,
3279 BYTE * pOut );
3280
3281 /*===========================================================================
3282 METHOD:
3283 DMSUIMGetICCID
3284
3285 DESCRIPTION:
3286 The function sends 'DMS/UIM Get ICCID Request' (0x003C)
3287 and returns the response
3288
3289 PARAMETERS:
3290 handle [ I ] - Gobi interface handle
3291 to [ I ] - Timeout for transaction (in milliseconds)
3292 inLen [ I ] - Reserved for future use (set to 0)
3293 pIn [ I ] - Reserved for future use (set to 0)
3294 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3295 contain, upon output the number of BYTEs copied
3296 to pOut
3297 pOut [ O ] - Output buffer
3298
3299 RETURN VALUE:
3300 ULONG - Return code
3301 ===========================================================================*/
3302 ULONG DMSUIMGetICCID(
3303 GOBIHANDLE handle,
3304 ULONG to,
3305 ULONG inLen,
3306 const BYTE * pIn,
3307 ULONG * pOutLen,
3308 BYTE * pOut );
3309
3310 /*===========================================================================
3311 METHOD:
3312 DMSUIMGetHostLockID
3313
3314 DESCRIPTION:
3315 The function sends 'DMS/UIM Get Host Lock ID Request' (0x003F)
3316 and returns the response
3317
3318 PARAMETERS:
3319 handle [ I ] - Gobi interface handle
3320 to [ I ] - Timeout for transaction (in milliseconds)
3321 inLen [ I ] - Reserved for future use (set to 0)
3322 pIn [ I ] - Reserved for future use (set to 0)
3323 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3324 contain, upon output the number of BYTEs copied
3325 to pOut
3326 pOut [ O ] - Output buffer
3327
3328 RETURN VALUE:
3329 ULONG - Return code
3330 ===========================================================================*/
3331 ULONG DMSUIMGetHostLockID(
3332 GOBIHANDLE handle,
3333 ULONG to,
3334 ULONG inLen,
3335 const BYTE * pIn,
3336 ULONG * pOutLen,
3337 BYTE * pOut );
3338
3339 /*===========================================================================
3340 METHOD:
3341 DMSUIMGetControlKeyStatus
3342
3343 DESCRIPTION:
3344 The function sends 'DMS/UIM Get Control Key Status Request' (0x0040)
3345 and returns the response
3346
3347 PARAMETERS:
3348 handle [ I ] - Gobi interface handle
3349 to [ I ] - Timeout for transaction (in milliseconds)
3350 inLen [ I ] - Length of input buffer
3351 pIn [ I ] - Input buffer
3352 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3353 contain, upon output the number of BYTEs copied
3354 to pOut
3355 pOut [ O ] - Output buffer
3356
3357 RETURN VALUE:
3358 ULONG - Return code
3359 ===========================================================================*/
3360 ULONG DMSUIMGetControlKeyStatus(
3361 GOBIHANDLE handle,
3362 ULONG to,
3363 ULONG inLen,
3364 const BYTE * pIn,
3365 ULONG * pOutLen,
3366 BYTE * pOut );
3367
3368 /*===========================================================================
3369 METHOD:
3370 DMSUIMSetControlKeyProtection
3371
3372 DESCRIPTION:
3373 The function sends 'DMS/UIM Set Control Key Protection Request' (0x0041)
3374 and returns the response
3375
3376 PARAMETERS:
3377 handle [ I ] - Gobi interface handle
3378 to [ I ] - Timeout for transaction (in milliseconds)
3379 inLen [ I ] - Length of input buffer
3380 pIn [ I ] - Input buffer
3381 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3382 contain, upon output the number of BYTEs copied
3383 to pOut
3384 pOut [ O ] - Output buffer
3385
3386 RETURN VALUE:
3387 ULONG - Return code
3388 ===========================================================================*/
3389 ULONG DMSUIMSetControlKeyProtection(
3390 GOBIHANDLE handle,
3391 ULONG to,
3392 ULONG inLen,
3393 const BYTE * pIn,
3394 ULONG * pOutLen,
3395 BYTE * pOut );
3396
3397 /*===========================================================================
3398 METHOD:
3399 DMSUIMUnblockControlKey
3400
3401 DESCRIPTION:
3402 The function sends 'DMS/UIM Unblock Control Key Request' (0x0042)
3403 and returns the response
3404
3405 PARAMETERS:
3406 handle [ I ] - Gobi interface handle
3407 to [ I ] - Timeout for transaction (in milliseconds)
3408 inLen [ I ] - Length of input buffer
3409 pIn [ I ] - Input buffer
3410 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3411 contain, upon output the number of BYTEs copied
3412 to pOut
3413 pOut [ O ] - Output buffer
3414
3415 RETURN VALUE:
3416 ULONG - Return code
3417 ===========================================================================*/
3418 ULONG DMSUIMUnblockControlKey(
3419 GOBIHANDLE handle,
3420 ULONG to,
3421 ULONG inLen,
3422 const BYTE * pIn,
3423 ULONG * pOutLen,
3424 BYTE * pOut );
3425
3426 /*===========================================================================
3427 METHOD:
3428 DMSGetIMSI
3429
3430 DESCRIPTION:
3431 The function sends 'DMS/Get IMSI Request' (0x0043)
3432 and returns the response
3433
3434 PARAMETERS:
3435 handle [ I ] - Gobi interface handle
3436 to [ I ] - Timeout for transaction (in milliseconds)
3437 inLen [ I ] - Reserved for future use (set to 0)
3438 pIn [ I ] - Reserved for future use (set to 0)
3439 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3440 contain, upon output the number of BYTEs copied
3441 to pOut
3442 pOut [ O ] - Output buffer
3443
3444 RETURN VALUE:
3445 ULONG - Return code
3446 ===========================================================================*/
3447 ULONG DMSGetIMSI(
3448 GOBIHANDLE handle,
3449 ULONG to,
3450 ULONG inLen,
3451 const BYTE * pIn,
3452 ULONG * pOutLen,
3453 BYTE * pOut );
3454
3455 /*===========================================================================
3456 METHOD:
3457 DMSGetUIMState
3458
3459 DESCRIPTION:
3460 The function sends 'DMS/Get UIM State Request' (0x0044)
3461 and returns the response
3462
3463 PARAMETERS:
3464 handle [ I ] - Gobi interface handle
3465 to [ I ] - Timeout for transaction (in milliseconds)
3466 inLen [ I ] - Reserved for future use (set to 0)
3467 pIn [ I ] - Reserved for future use (set to 0)
3468 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3469 contain, upon output the number of BYTEs copied
3470 to pOut
3471 pOut [ O ] - Output buffer
3472
3473 RETURN VALUE:
3474 ULONG - Return code
3475 ===========================================================================*/
3476 ULONG DMSGetUIMState(
3477 GOBIHANDLE handle,
3478 ULONG to,
3479 ULONG inLen,
3480 const BYTE * pIn,
3481 ULONG * pOutLen,
3482 BYTE * pOut );
3483
3484 /*===========================================================================
3485 METHOD:
3486 DMSGetBandCapabilities
3487
3488 DESCRIPTION:
3489 The function sends 'DMS/Get Band Capabilities Request' (0x0045)
3490 and returns the response
3491
3492 PARAMETERS:
3493 handle [ I ] - Gobi interface handle
3494 to [ I ] - Timeout for transaction (in milliseconds)
3495 inLen [ I ] - Reserved for future use (set to 0)
3496 pIn [ I ] - Reserved for future use (set to 0)
3497 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3498 contain, upon output the number of BYTEs copied
3499 to pOut
3500 pOut [ O ] - Output buffer
3501
3502 RETURN VALUE:
3503 ULONG - Return code
3504 ===========================================================================*/
3505 ULONG DMSGetBandCapabilities(
3506 GOBIHANDLE handle,
3507 ULONG to,
3508 ULONG inLen,
3509 const BYTE * pIn,
3510 ULONG * pOutLen,
3511 BYTE * pOut );
3512
3513 /*===========================================================================
3514 METHOD:
3515 DMSGetFactorySerialNumber
3516
3517 DESCRIPTION:
3518 The function sends 'DMS/Get Factory Serial Number Request' (0x0046)
3519 and returns the response
3520
3521 PARAMETERS:
3522 handle [ I ] - Gobi interface handle
3523 to [ I ] - Timeout for transaction (in milliseconds)
3524 inLen [ I ] - Reserved for future use (set to 0)
3525 pIn [ I ] - Reserved for future use (set to 0)
3526 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3527 contain, upon output the number of BYTEs copied
3528 to pOut
3529 pOut [ O ] - Output buffer
3530
3531 RETURN VALUE:
3532 ULONG - Return code
3533 ===========================================================================*/
3534 ULONG DMSGetFactorySerialNumber(
3535 GOBIHANDLE handle,
3536 ULONG to,
3537 ULONG inLen,
3538 const BYTE * pIn,
3539 ULONG * pOutLen,
3540 BYTE * pOut );
3541
3542 /*===========================================================================
3543 METHOD:
3544 DMSSetDeviceTime
3545
3546 DESCRIPTION:
3547 The function sends 'DMS/Set Device Time Request' (0x004B)
3548 and returns the response
3549
3550 PARAMETERS:
3551 handle [ I ] - Gobi interface handle
3552 to [ I ] - Timeout for transaction (in milliseconds)
3553 inLen [ I ] - Length of input buffer
3554 pIn [ I ] - Input buffer
3555 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3556 contain, upon output the number of BYTEs copied
3557 to pOut
3558 pOut [ O ] - Output buffer
3559
3560 RETURN VALUE:
3561 ULONG - Return code
3562 ===========================================================================*/
3563 ULONG DMSSetDeviceTime(
3564 GOBIHANDLE handle,
3565 ULONG to,
3566 ULONG inLen,
3567 const BYTE * pIn,
3568 ULONG * pOutLen,
3569 BYTE * pOut );
3570
3571 /*===========================================================================
3572 METHOD:
3573 DMSGetSoftwareVersion
3574
3575 DESCRIPTION:
3576 The function sends 'DMS/Get Software Version Request' (0x0051)
3577 and returns the response
3578
3579 PARAMETERS:
3580 handle [ I ] - Gobi interface handle
3581 to [ I ] - Timeout for transaction (in milliseconds)
3582 inLen [ I ] - Reserved for future use (set to 0)
3583 pIn [ I ] - Reserved for future use (set to 0)
3584 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3585 contain, upon output the number of BYTEs copied
3586 to pOut
3587 pOut [ O ] - Output buffer
3588
3589 RETURN VALUE:
3590 ULONG - Return code
3591 ===========================================================================*/
3592 ULONG DMSGetSoftwareVersion(
3593 GOBIHANDLE handle,
3594 ULONG to,
3595 ULONG inLen,
3596 const BYTE * pIn,
3597 ULONG * pOutLen,
3598 BYTE * pOut );
3599
3600 /*===========================================================================
3601 METHOD:
3602 DMSSetSPC
3603
3604 DESCRIPTION:
3605 The function sends 'DMS/Set SPC Request' (0x0052)
3606 and returns the response
3607
3608 PARAMETERS:
3609 handle [ I ] - Gobi interface handle
3610 to [ I ] - Timeout for transaction (in milliseconds)
3611 inLen [ I ] - Length of input buffer
3612 pIn [ I ] - Input buffer
3613 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3614 contain, upon output the number of BYTEs copied
3615 to pOut
3616 pOut [ O ] - Output buffer
3617
3618 RETURN VALUE:
3619 ULONG - Return code
3620 ===========================================================================*/
3621 ULONG DMSSetSPC(
3622 GOBIHANDLE handle,
3623 ULONG to,
3624 ULONG inLen,
3625 const BYTE * pIn,
3626 ULONG * pOutLen,
3627 BYTE * pOut );
3628
3629 /*===========================================================================
3630 METHOD:
3631 DMSGetCurrentPRLInfo
3632
3633 DESCRIPTION:
3634 The function sends 'DMS/Get Current PRL Info Request' (0x0053)
3635 and returns the response
3636
3637 PARAMETERS:
3638 handle [ I ] - Gobi interface handle
3639 to [ I ] - Timeout for transaction (in milliseconds)
3640 inLen [ I ] - Reserved for future use (set to 0)
3641 pIn [ I ] - Reserved for future use (set to 0)
3642 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3643 contain, upon output the number of BYTEs copied
3644 to pOut
3645 pOut [ O ] - Output buffer
3646
3647 RETURN VALUE:
3648 ULONG - Return code
3649 ===========================================================================*/
3650 ULONG DMSGetCurrentPRLInfo(
3651 GOBIHANDLE handle,
3652 ULONG to,
3653 ULONG inLen,
3654 const BYTE * pIn,
3655 ULONG * pOutLen,
3656 BYTE * pOut );
3657
3658 /*===========================================================================
3659 METHOD:
3660 NASReset
3661
3662 DESCRIPTION:
3663 The function sends 'NAS/Reset Request' (0x0000)
3664 and returns the response
3665
3666 PARAMETERS:
3667 handle [ I ] - Gobi interface handle
3668 to [ I ] - Timeout for transaction (in milliseconds)
3669 inLen [ I ] - Reserved for future use (set to 0)
3670 pIn [ I ] - Reserved for future use (set to 0)
3671 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3672 contain, upon output the number of BYTEs copied
3673 to pOut
3674 pOut [ O ] - Output buffer
3675
3676 RETURN VALUE:
3677 ULONG - Return code
3678 ===========================================================================*/
3679 ULONG NASReset(
3680 GOBIHANDLE handle,
3681 ULONG to,
3682 ULONG inLen,
3683 const BYTE * pIn,
3684 ULONG * pOutLen,
3685 BYTE * pOut );
3686
3687 /*===========================================================================
3688 METHOD:
3689 NASAbort
3690
3691 DESCRIPTION:
3692 The function sends 'NAS/Abort Request' (0x0001)
3693 and returns the response
3694
3695 PARAMETERS:
3696 handle [ I ] - Gobi interface handle
3697 to [ I ] - Timeout for transaction (in milliseconds)
3698 inLen [ I ] - Length of input buffer
3699 pIn [ I ] - Input buffer
3700 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3701 contain, upon output the number of BYTEs copied
3702 to pOut
3703 pOut [ O ] - Output buffer
3704
3705 RETURN VALUE:
3706 ULONG - Return code
3707 ===========================================================================*/
3708 ULONG NASAbort(
3709 GOBIHANDLE handle,
3710 ULONG to,
3711 ULONG inLen,
3712 const BYTE * pIn,
3713 ULONG * pOutLen,
3714 BYTE * pOut );
3715
3716 /*===========================================================================
3717 METHOD:
3718 NASSetEventReport
3719
3720 DESCRIPTION:
3721 The function sends 'NAS/Set Event Report Request' (0x0002)
3722 and returns the response
3723
3724 PARAMETERS:
3725 handle [ I ] - Gobi interface handle
3726 to [ I ] - Timeout for transaction (in milliseconds)
3727 inLen [ I ] - Length of input buffer
3728 pIn [ I ] - Input buffer
3729 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3730 contain, upon output the number of BYTEs copied
3731 to pOut
3732 pOut [ O ] - Output buffer
3733
3734 RETURN VALUE:
3735 ULONG - Return code
3736 ===========================================================================*/
3737 ULONG NASSetEventReport(
3738 GOBIHANDLE handle,
3739 ULONG to,
3740 ULONG inLen,
3741 const BYTE * pIn,
3742 ULONG * pOutLen,
3743 BYTE * pOut );
3744
3745 /*===========================================================================
3746 METHOD:
3747 NASSetRegistrationEventReport
3748
3749 DESCRIPTION:
3750 The function sends 'NAS/Set Registration Event Report Request' (0x0003)
3751 and returns the response
3752
3753 PARAMETERS:
3754 handle [ I ] - Gobi interface handle
3755 to [ I ] - Timeout for transaction (in milliseconds)
3756 inLen [ I ] - Length of input buffer
3757 pIn [ I ] - Input buffer
3758 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3759 contain, upon output the number of BYTEs copied
3760 to pOut
3761 pOut [ O ] - Output buffer
3762
3763 RETURN VALUE:
3764 ULONG - Return code
3765 ===========================================================================*/
3766 ULONG NASSetRegistrationEventReport(
3767 GOBIHANDLE handle,
3768 ULONG to,
3769 ULONG inLen,
3770 const BYTE * pIn,
3771 ULONG * pOutLen,
3772 BYTE * pOut );
3773
3774 /*===========================================================================
3775 METHOD:
3776 NASGetSignalStrength
3777
3778 DESCRIPTION:
3779 The function sends 'NAS/Get Signal Strength Request' (0x0020)
3780 and returns the response
3781
3782 PARAMETERS:
3783 handle [ I ] - Gobi interface handle
3784 to [ I ] - Timeout for transaction (in milliseconds)
3785 inLen [ I ] - Length of input buffer
3786 pIn [ I ] - Input buffer
3787 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3788 contain, upon output the number of BYTEs copied
3789 to pOut
3790 pOut [ O ] - Output buffer
3791
3792 RETURN VALUE:
3793 ULONG - Return code
3794 ===========================================================================*/
3795 ULONG NASGetSignalStrength(
3796 GOBIHANDLE handle,
3797 ULONG to,
3798 ULONG inLen,
3799 const BYTE * pIn,
3800 ULONG * pOutLen,
3801 BYTE * pOut );
3802
3803 /*===========================================================================
3804 METHOD:
3805 NASPerformNetworkScan
3806
3807 DESCRIPTION:
3808 The function sends 'NAS/Perform Network Scan Request' (0x0021)
3809 and returns the response
3810
3811 PARAMETERS:
3812 handle [ I ] - Gobi interface handle
3813 to [ I ] - Timeout for transaction (in milliseconds)
3814 inLen [ I ] - Length of input buffer
3815 pIn [ I ] - Input buffer
3816 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3817 contain, upon output the number of BYTEs copied
3818 to pOut
3819 pOut [ O ] - Output buffer
3820
3821 RETURN VALUE:
3822 ULONG - Return code
3823 ===========================================================================*/
3824 ULONG NASPerformNetworkScan(
3825 GOBIHANDLE handle,
3826 ULONG to,
3827 ULONG inLen,
3828 const BYTE * pIn,
3829 ULONG * pOutLen,
3830 BYTE * pOut );
3831
3832 /*===========================================================================
3833 METHOD:
3834 NASInitiateNetworkRegister
3835
3836 DESCRIPTION:
3837 The function sends 'NAS/Initiate Network Register Request' (0x0022)
3838 and returns the response
3839
3840 PARAMETERS:
3841 handle [ I ] - Gobi interface handle
3842 to [ I ] - Timeout for transaction (in milliseconds)
3843 inLen [ I ] - Length of input buffer
3844 pIn [ I ] - Input buffer
3845 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3846 contain, upon output the number of BYTEs copied
3847 to pOut
3848 pOut [ O ] - Output buffer
3849
3850 RETURN VALUE:
3851 ULONG - Return code
3852 ===========================================================================*/
3853 ULONG NASInitiateNetworkRegister(
3854 GOBIHANDLE handle,
3855 ULONG to,
3856 ULONG inLen,
3857 const BYTE * pIn,
3858 ULONG * pOutLen,
3859 BYTE * pOut );
3860
3861 /*===========================================================================
3862 METHOD:
3863 NASInitiateAttach
3864
3865 DESCRIPTION:
3866 The function sends 'NAS/Initiate Attach Request' (0x0023)
3867 and returns the response
3868
3869 PARAMETERS:
3870 handle [ I ] - Gobi interface handle
3871 to [ I ] - Timeout for transaction (in milliseconds)
3872 inLen [ I ] - Length of input buffer
3873 pIn [ I ] - Input buffer
3874 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3875 contain, upon output the number of BYTEs copied
3876 to pOut
3877 pOut [ O ] - Output buffer
3878
3879 RETURN VALUE:
3880 ULONG - Return code
3881 ===========================================================================*/
3882 ULONG NASInitiateAttach(
3883 GOBIHANDLE handle,
3884 ULONG to,
3885 ULONG inLen,
3886 const BYTE * pIn,
3887 ULONG * pOutLen,
3888 BYTE * pOut );
3889
3890 /*===========================================================================
3891 METHOD:
3892 NASGetServingSystem
3893
3894 DESCRIPTION:
3895 The function sends 'NAS/Get Serving System Request' (0x0024)
3896 and returns the response
3897
3898 PARAMETERS:
3899 handle [ I ] - Gobi interface handle
3900 to [ I ] - Timeout for transaction (in milliseconds)
3901 inLen [ I ] - Reserved for future use (set to 0)
3902 pIn [ I ] - Reserved for future use (set to 0)
3903 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3904 contain, upon output the number of BYTEs copied
3905 to pOut
3906 pOut [ O ] - Output buffer
3907
3908 RETURN VALUE:
3909 ULONG - Return code
3910 ===========================================================================*/
3911 ULONG NASGetServingSystem(
3912 GOBIHANDLE handle,
3913 ULONG to,
3914 ULONG inLen,
3915 const BYTE * pIn,
3916 ULONG * pOutLen,
3917 BYTE * pOut );
3918
3919 /*===========================================================================
3920 METHOD:
3921 NASGetHomeNetwork
3922
3923 DESCRIPTION:
3924 The function sends 'NAS/Get Home Network Request' (0x0025)
3925 and returns the response
3926
3927 PARAMETERS:
3928 handle [ I ] - Gobi interface handle
3929 to [ I ] - Timeout for transaction (in milliseconds)
3930 inLen [ I ] - Reserved for future use (set to 0)
3931 pIn [ I ] - Reserved for future use (set to 0)
3932 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3933 contain, upon output the number of BYTEs copied
3934 to pOut
3935 pOut [ O ] - Output buffer
3936
3937 RETURN VALUE:
3938 ULONG - Return code
3939 ===========================================================================*/
3940 ULONG NASGetHomeNetwork(
3941 GOBIHANDLE handle,
3942 ULONG to,
3943 ULONG inLen,
3944 const BYTE * pIn,
3945 ULONG * pOutLen,
3946 BYTE * pOut );
3947
3948 /*===========================================================================
3949 METHOD:
3950 NASGetPreferredNetworks
3951
3952 DESCRIPTION:
3953 The function sends 'NAS/Get Preferred Networks Request' (0x0026)
3954 and returns the response
3955
3956 PARAMETERS:
3957 handle [ I ] - Gobi interface handle
3958 to [ I ] - Timeout for transaction (in milliseconds)
3959 inLen [ I ] - Reserved for future use (set to 0)
3960 pIn [ I ] - Reserved for future use (set to 0)
3961 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3962 contain, upon output the number of BYTEs copied
3963 to pOut
3964 pOut [ O ] - Output buffer
3965
3966 RETURN VALUE:
3967 ULONG - Return code
3968 ===========================================================================*/
3969 ULONG NASGetPreferredNetworks(
3970 GOBIHANDLE handle,
3971 ULONG to,
3972 ULONG inLen,
3973 const BYTE * pIn,
3974 ULONG * pOutLen,
3975 BYTE * pOut );
3976
3977 /*===========================================================================
3978 METHOD:
3979 NASSetPreferredNetworks
3980
3981 DESCRIPTION:
3982 The function sends 'NAS/Set Preferred Networks Request' (0x0027)
3983 and returns the response
3984
3985 PARAMETERS:
3986 handle [ I ] - Gobi interface handle
3987 to [ I ] - Timeout for transaction (in milliseconds)
3988 inLen [ I ] - Length of input buffer
3989 pIn [ I ] - Input buffer
3990 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
3991 contain, upon output the number of BYTEs copied
3992 to pOut
3993 pOut [ O ] - Output buffer
3994
3995 RETURN VALUE:
3996 ULONG - Return code
3997 ===========================================================================*/
3998 ULONG NASSetPreferredNetworks(
3999 GOBIHANDLE handle,
4000 ULONG to,
4001 ULONG inLen,
4002 const BYTE * pIn,
4003 ULONG * pOutLen,
4004 BYTE * pOut );
4005
4006 /*===========================================================================
4007 METHOD:
4008 NASGetForbiddenNetworks
4009
4010 DESCRIPTION:
4011 The function sends 'NAS/Get Forbidden Networks Request' (0x0028)
4012 and returns the response
4013
4014 PARAMETERS:
4015 handle [ I ] - Gobi interface handle
4016 to [ I ] - Timeout for transaction (in milliseconds)
4017 inLen [ I ] - Reserved for future use (set to 0)
4018 pIn [ I ] - Reserved for future use (set to 0)
4019 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4020 contain, upon output the number of BYTEs copied
4021 to pOut
4022 pOut [ O ] - Output buffer
4023
4024 RETURN VALUE:
4025 ULONG - Return code
4026 ===========================================================================*/
4027 ULONG NASGetForbiddenNetworks(
4028 GOBIHANDLE handle,
4029 ULONG to,
4030 ULONG inLen,
4031 const BYTE * pIn,
4032 ULONG * pOutLen,
4033 BYTE * pOut );
4034
4035 /*===========================================================================
4036 METHOD:
4037 NASSetForbiddenNetworks
4038
4039 DESCRIPTION:
4040 The function sends 'NAS/Set Forbidden Networks Request' (0x0029)
4041 and returns the response
4042
4043 PARAMETERS:
4044 handle [ I ] - Gobi interface handle
4045 to [ I ] - Timeout for transaction (in milliseconds)
4046 inLen [ I ] - Length of input buffer
4047 pIn [ I ] - Input buffer
4048 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4049 contain, upon output the number of BYTEs copied
4050 to pOut
4051 pOut [ O ] - Output buffer
4052
4053 RETURN VALUE:
4054 ULONG - Return code
4055 ===========================================================================*/
4056 ULONG NASSetForbiddenNetworks(
4057 GOBIHANDLE handle,
4058 ULONG to,
4059 ULONG inLen,
4060 const BYTE * pIn,
4061 ULONG * pOutLen,
4062 BYTE * pOut );
4063
4064 /*===========================================================================
4065 METHOD:
4066 NASSetTechnologyPreference
4067
4068 DESCRIPTION:
4069 The function sends 'NAS/Set Technology Preference Request' (0x002A)
4070 and returns the response
4071
4072 PARAMETERS:
4073 handle [ I ] - Gobi interface handle
4074 to [ I ] - Timeout for transaction (in milliseconds)
4075 inLen [ I ] - Length of input buffer
4076 pIn [ I ] - Input buffer
4077 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4078 contain, upon output the number of BYTEs copied
4079 to pOut
4080 pOut [ O ] - Output buffer
4081
4082 RETURN VALUE:
4083 ULONG - Return code
4084 ===========================================================================*/
4085 ULONG NASSetTechnologyPreference(
4086 GOBIHANDLE handle,
4087 ULONG to,
4088 ULONG inLen,
4089 const BYTE * pIn,
4090 ULONG * pOutLen,
4091 BYTE * pOut );
4092
4093 /*===========================================================================
4094 METHOD:
4095 NASGetTechnologyPreference
4096
4097 DESCRIPTION:
4098 The function sends 'NAS/Get Technology Preference Request' (0x002B)
4099 and returns the response
4100
4101 PARAMETERS:
4102 handle [ I ] - Gobi interface handle
4103 to [ I ] - Timeout for transaction (in milliseconds)
4104 inLen [ I ] - Reserved for future use (set to 0)
4105 pIn [ I ] - Reserved for future use (set to 0)
4106 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4107 contain, upon output the number of BYTEs copied
4108 to pOut
4109 pOut [ O ] - Output buffer
4110
4111 RETURN VALUE:
4112 ULONG - Return code
4113 ===========================================================================*/
4114 ULONG NASGetTechnologyPreference(
4115 GOBIHANDLE handle,
4116 ULONG to,
4117 ULONG inLen,
4118 const BYTE * pIn,
4119 ULONG * pOutLen,
4120 BYTE * pOut );
4121
4122 /*===========================================================================
4123 METHOD:
4124 NASGetACCOLC
4125
4126 DESCRIPTION:
4127 The function sends 'NAS/Get ACCOLC Request' (0x002C)
4128 and returns the response
4129
4130 PARAMETERS:
4131 handle [ I ] - Gobi interface handle
4132 to [ I ] - Timeout for transaction (in milliseconds)
4133 inLen [ I ] - Reserved for future use (set to 0)
4134 pIn [ I ] - Reserved for future use (set to 0)
4135 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4136 contain, upon output the number of BYTEs copied
4137 to pOut
4138 pOut [ O ] - Output buffer
4139
4140 RETURN VALUE:
4141 ULONG - Return code
4142 ===========================================================================*/
4143 ULONG NASGetACCOLC(
4144 GOBIHANDLE handle,
4145 ULONG to,
4146 ULONG inLen,
4147 const BYTE * pIn,
4148 ULONG * pOutLen,
4149 BYTE * pOut );
4150
4151 /*===========================================================================
4152 METHOD:
4153 NASSetACCOLC
4154
4155 DESCRIPTION:
4156 The function sends 'NAS/Set ACCOLC Request' (0x002D)
4157 and returns the response
4158
4159 PARAMETERS:
4160 handle [ I ] - Gobi interface handle
4161 to [ I ] - Timeout for transaction (in milliseconds)
4162 inLen [ I ] - Length of input buffer
4163 pIn [ I ] - Input buffer
4164 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4165 contain, upon output the number of BYTEs copied
4166 to pOut
4167 pOut [ O ] - Output buffer
4168
4169 RETURN VALUE:
4170 ULONG - Return code
4171 ===========================================================================*/
4172 ULONG NASSetACCOLC(
4173 GOBIHANDLE handle,
4174 ULONG to,
4175 ULONG inLen,
4176 const BYTE * pIn,
4177 ULONG * pOutLen,
4178 BYTE * pOut );
4179
4180 /*===========================================================================
4181 METHOD:
4182 NASGetSystemPreference
4183
4184 DESCRIPTION:
4185 The function sends 'NAS/Get System Preference' (0x002E)
4186 and returns the response
4187
4188 PARAMETERS:
4189 handle [ I ] - Gobi interface handle
4190 to [ I ] - Timeout for transaction (in milliseconds)
4191 inLen [ I ] - Reserved for future use (set to 0)
4192 pIn [ I ] - Reserved for future use (set to 0)
4193 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4194 contain, upon output the number of BYTEs copied
4195 to pOut
4196 pOut [ O ] - Output buffer
4197
4198 RETURN VALUE:
4199 ULONG - Return code
4200 ===========================================================================*/
4201 ULONG NASGetSystemPreference(
4202 GOBIHANDLE handle,
4203 ULONG to,
4204 ULONG inLen,
4205 const BYTE * pIn,
4206 ULONG * pOutLen,
4207 BYTE * pOut );
4208
4209 /*===========================================================================
4210 METHOD:
4211 NASGetNetworkParameters
4212
4213 DESCRIPTION:
4214 The function sends 'NAS/Get Network Parameters Request' (0x002F)
4215 and returns the response
4216
4217 PARAMETERS:
4218 handle [ I ] - Gobi interface handle
4219 to [ I ] - Timeout for transaction (in milliseconds)
4220 inLen [ I ] - Reserved for future use (set to 0)
4221 pIn [ I ] - Reserved for future use (set to 0)
4222 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4223 contain, upon output the number of BYTEs copied
4224 to pOut
4225 pOut [ O ] - Output buffer
4226
4227 RETURN VALUE:
4228 ULONG - Return code
4229 ===========================================================================*/
4230 ULONG NASGetNetworkParameters(
4231 GOBIHANDLE handle,
4232 ULONG to,
4233 ULONG inLen,
4234 const BYTE * pIn,
4235 ULONG * pOutLen,
4236 BYTE * pOut );
4237
4238 /*===========================================================================
4239 METHOD:
4240 NASSetNetworkParameters
4241
4242 DESCRIPTION:
4243 The function sends 'NAS/Set Network Parameters Request' (0x0030)
4244 and returns the response
4245
4246 PARAMETERS:
4247 handle [ I ] - Gobi interface handle
4248 to [ I ] - Timeout for transaction (in milliseconds)
4249 inLen [ I ] - Length of input buffer
4250 pIn [ I ] - Input buffer
4251 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4252 contain, upon output the number of BYTEs copied
4253 to pOut
4254 pOut [ O ] - Output buffer
4255
4256 RETURN VALUE:
4257 ULONG - Return code
4258 ===========================================================================*/
4259 ULONG NASSetNetworkParameters(
4260 GOBIHANDLE handle,
4261 ULONG to,
4262 ULONG inLen,
4263 const BYTE * pIn,
4264 ULONG * pOutLen,
4265 BYTE * pOut );
4266
4267 /*===========================================================================
4268 METHOD:
4269 NASGetRFInfo
4270
4271 DESCRIPTION:
4272 The function sends 'NAS/Get RF Info Request' (0x0031)
4273 and returns the response
4274
4275 PARAMETERS:
4276 handle [ I ] - Gobi interface handle
4277 to [ I ] - Timeout for transaction (in milliseconds)
4278 inLen [ I ] - Reserved for future use (set to 0)
4279 pIn [ I ] - Reserved for future use (set to 0)
4280 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4281 contain, upon output the number of BYTEs copied
4282 to pOut
4283 pOut [ O ] - Output buffer
4284
4285 RETURN VALUE:
4286 ULONG - Return code
4287 ===========================================================================*/
4288 ULONG NASGetRFInfo(
4289 GOBIHANDLE handle,
4290 ULONG to,
4291 ULONG inLen,
4292 const BYTE * pIn,
4293 ULONG * pOutLen,
4294 BYTE * pOut );
4295
4296 /*===========================================================================
4297 METHOD:
4298 NASGetANAAAAuthenticationStatus
4299
4300 DESCRIPTION:
4301 The function sends 'NAS/Get AN-AAA Authentication Status Request' (0x0032)
4302 and returns the response
4303
4304 PARAMETERS:
4305 handle [ I ] - Gobi interface handle
4306 to [ I ] - Timeout for transaction (in milliseconds)
4307 inLen [ I ] - Reserved for future use (set to 0)
4308 pIn [ I ] - Reserved for future use (set to 0)
4309 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4310 contain, upon output the number of BYTEs copied
4311 to pOut
4312 pOut [ O ] - Output buffer
4313
4314 RETURN VALUE:
4315 ULONG - Return code
4316 ===========================================================================*/
4317 ULONG NASGetANAAAAuthenticationStatus(
4318 GOBIHANDLE handle,
4319 ULONG to,
4320 ULONG inLen,
4321 const BYTE * pIn,
4322 ULONG * pOutLen,
4323 BYTE * pOut );
4324
4325 /*===========================================================================
4326 METHOD:
4327 NASSetSystemSelectionPref
4328
4329 DESCRIPTION:
4330 The function sends 'NAS/Set System Selection Pref Request' (0x0033)
4331 and returns the response
4332
4333 PARAMETERS:
4334 handle [ I ] - Gobi interface handle
4335 to [ I ] - Timeout for transaction (in milliseconds)
4336 inLen [ I ] - Length of input buffer
4337 pIn [ I ] - Input buffer
4338 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4339 contain, upon output the number of BYTEs copied
4340 to pOut
4341 pOut [ O ] - Output buffer
4342
4343 RETURN VALUE:
4344 ULONG - Return code
4345 ===========================================================================*/
4346 ULONG NASSetSystemSelectionPref(
4347 GOBIHANDLE handle,
4348 ULONG to,
4349 ULONG inLen,
4350 const BYTE * pIn,
4351 ULONG * pOutLen,
4352 BYTE * pOut );
4353
4354 /*===========================================================================
4355 METHOD:
4356 NASGetSystemSelectionPref
4357
4358 DESCRIPTION:
4359 The function sends 'NAS/Get System Selection Pref Request' (0x0034)
4360 and returns the response
4361
4362 PARAMETERS:
4363 handle [ I ] - Gobi interface handle
4364 to [ I ] - Timeout for transaction (in milliseconds)
4365 inLen [ I ] - Reserved for future use (set to 0)
4366 pIn [ I ] - Reserved for future use (set to 0)
4367 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4368 contain, upon output the number of BYTEs copied
4369 to pOut
4370 pOut [ O ] - Output buffer
4371
4372 RETURN VALUE:
4373 ULONG - Return code
4374 ===========================================================================*/
4375 ULONG NASGetSystemSelectionPref(
4376 GOBIHANDLE handle,
4377 ULONG to,
4378 ULONG inLen,
4379 const BYTE * pIn,
4380 ULONG * pOutLen,
4381 BYTE * pOut );
4382
4383 /*===========================================================================
4384 METHOD:
4385 NASSetDDTMPreference
4386
4387 DESCRIPTION:
4388 The function sends 'NAS/Set DDTM Preference Request' (0x0037)
4389 and returns the response
4390
4391 PARAMETERS:
4392 handle [ I ] - Gobi interface handle
4393 to [ I ] - Timeout for transaction (in milliseconds)
4394 inLen [ I ] - Length of input buffer
4395 pIn [ I ] - Input buffer
4396 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4397 contain, upon output the number of BYTEs copied
4398 to pOut
4399 pOut [ O ] - Output buffer
4400
4401 RETURN VALUE:
4402 ULONG - Return code
4403 ===========================================================================*/
4404 ULONG NASSetDDTMPreference(
4405 GOBIHANDLE handle,
4406 ULONG to,
4407 ULONG inLen,
4408 const BYTE * pIn,
4409 ULONG * pOutLen,
4410 BYTE * pOut );
4411
4412 /*===========================================================================
4413 METHOD:
4414 NASGetDDTMPreference
4415
4416 DESCRIPTION:
4417 The function sends 'NAS/Get DDTM Preference Request' (0x0038)
4418 and returns the response
4419
4420 PARAMETERS:
4421 handle [ I ] - Gobi interface handle
4422 to [ I ] - Timeout for transaction (in milliseconds)
4423 inLen [ I ] - Reserved for future use (set to 0)
4424 pIn [ I ] - Reserved for future use (set to 0)
4425 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4426 contain, upon output the number of BYTEs copied
4427 to pOut
4428 pOut [ O ] - Output buffer
4429
4430 RETURN VALUE:
4431 ULONG - Return code
4432 ===========================================================================*/
4433 ULONG NASGetDDTMPreference(
4434 GOBIHANDLE handle,
4435 ULONG to,
4436 ULONG inLen,
4437 const BYTE * pIn,
4438 ULONG * pOutLen,
4439 BYTE * pOut );
4440
4441 /*===========================================================================
4442 METHOD:
4443 NASGetOperatorNameData
4444
4445 DESCRIPTION:
4446 The function sends 'NAS/Get Operator Name Data Request' (0x0039)
4447 and returns the response
4448
4449 PARAMETERS:
4450 handle [ I ] - Gobi interface handle
4451 to [ I ] - Timeout for transaction (in milliseconds)
4452 inLen [ I ] - Reserved for future use (set to 0)
4453 pIn [ I ] - Reserved for future use (set to 0)
4454 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4455 contain, upon output the number of BYTEs copied
4456 to pOut
4457 pOut [ O ] - Output buffer
4458
4459 RETURN VALUE:
4460 ULONG - Return code
4461 ===========================================================================*/
4462 ULONG NASGetOperatorNameData(
4463 GOBIHANDLE handle,
4464 ULONG to,
4465 ULONG inLen,
4466 const BYTE * pIn,
4467 ULONG * pOutLen,
4468 BYTE * pOut );
4469
4470 /*===========================================================================
4471 METHOD:
4472 NASGetCSPPLMNMode
4473
4474 DESCRIPTION:
4475 The function sends 'NAS/Get CSP PLMN Mode Request' (0x003B)
4476 and returns the response
4477
4478 PARAMETERS:
4479 handle [ I ] - Gobi interface handle
4480 to [ I ] - Timeout for transaction (in milliseconds)
4481 inLen [ I ] - Reserved for future use (set to 0)
4482 pIn [ I ] - Reserved for future use (set to 0)
4483 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4484 contain, upon output the number of BYTEs copied
4485 to pOut
4486 pOut [ O ] - Output buffer
4487
4488 RETURN VALUE:
4489 ULONG - Return code
4490 ===========================================================================*/
4491 ULONG NASGetCSPPLMNMode(
4492 GOBIHANDLE handle,
4493 ULONG to,
4494 ULONG inLen,
4495 const BYTE * pIn,
4496 ULONG * pOutLen,
4497 BYTE * pOut );
4498
4499 /*===========================================================================
4500 METHOD:
4501 NASUpdateAKEY
4502
4503 DESCRIPTION:
4504 The function sends 'NAS/Update AKEY Request' (0x003D)
4505 and returns the response
4506
4507 PARAMETERS:
4508 handle [ I ] - Gobi interface handle
4509 to [ I ] - Timeout for transaction (in milliseconds)
4510 inLen [ I ] - Length of input buffer
4511 pIn [ I ] - Input buffer
4512 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4513 contain, upon output the number of BYTEs copied
4514 to pOut
4515 pOut [ O ] - Output buffer
4516
4517 RETURN VALUE:
4518 ULONG - Return code
4519 ===========================================================================*/
4520 ULONG NASUpdateAKEY(
4521 GOBIHANDLE handle,
4522 ULONG to,
4523 ULONG inLen,
4524 const BYTE * pIn,
4525 ULONG * pOutLen,
4526 BYTE * pOut );
4527
4528 /*===========================================================================
4529 METHOD:
4530 NASGet3GPP2SubscriptionInfo
4531
4532 DESCRIPTION:
4533 The function sends 'NAS/Get 3GPP2 Subscription Info Request' (0x003E)
4534 and returns the response
4535
4536 PARAMETERS:
4537 handle [ I ] - Gobi interface handle
4538 to [ I ] - Timeout for transaction (in milliseconds)
4539 inLen [ I ] - Length of input buffer
4540 pIn [ I ] - Input buffer
4541 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4542 contain, upon output the number of BYTEs copied
4543 to pOut
4544 pOut [ O ] - Output buffer
4545
4546 RETURN VALUE:
4547 ULONG - Return code
4548 ===========================================================================*/
4549 ULONG NASGet3GPP2SubscriptionInfo(
4550 GOBIHANDLE handle,
4551 ULONG to,
4552 ULONG inLen,
4553 const BYTE * pIn,
4554 ULONG * pOutLen,
4555 BYTE * pOut );
4556
4557 /*===========================================================================
4558 METHOD:
4559 NASSet3GPP2SubscriptionInfo
4560
4561 DESCRIPTION:
4562 The function sends 'NAS/Set 3GPP2 Subscription Info Request' (0x003F)
4563 and returns the response
4564
4565 PARAMETERS:
4566 handle [ I ] - Gobi interface handle
4567 to [ I ] - Timeout for transaction (in milliseconds)
4568 inLen [ I ] - Length of input buffer
4569 pIn [ I ] - Input buffer
4570 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4571 contain, upon output the number of BYTEs copied
4572 to pOut
4573 pOut [ O ] - Output buffer
4574
4575 RETURN VALUE:
4576 ULONG - Return code
4577 ===========================================================================*/
4578 ULONG NASSet3GPP2SubscriptionInfo(
4579 GOBIHANDLE handle,
4580 ULONG to,
4581 ULONG inLen,
4582 const BYTE * pIn,
4583 ULONG * pOutLen,
4584 BYTE * pOut );
4585
4586 /*===========================================================================
4587 METHOD:
4588 NASGetMobileCAIRevision
4589
4590 DESCRIPTION:
4591 The function sends 'NAS/Get Mobile CAI Revision Request' (0x0040)
4592 and returns the response
4593
4594 PARAMETERS:
4595 handle [ I ] - Gobi interface handle
4596 to [ I ] - Timeout for transaction (in milliseconds)
4597 inLen [ I ] - Reserved for future use (set to 0)
4598 pIn [ I ] - Reserved for future use (set to 0)
4599 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4600 contain, upon output the number of BYTEs copied
4601 to pOut
4602 pOut [ O ] - Output buffer
4603
4604 RETURN VALUE:
4605 ULONG - Return code
4606 ===========================================================================*/
4607 ULONG NASGetMobileCAIRevision(
4608 GOBIHANDLE handle,
4609 ULONG to,
4610 ULONG inLen,
4611 const BYTE * pIn,
4612 ULONG * pOutLen,
4613 BYTE * pOut );
4614
4615 /*===========================================================================
4616 METHOD:
4617 NASGetRTREConfig
4618
4619 DESCRIPTION:
4620 The function sends 'NAS/Get RTRE Config Request' (0x0041)
4621 and returns the response
4622
4623 PARAMETERS:
4624 handle [ I ] - Gobi interface handle
4625 to [ I ] - Timeout for transaction (in milliseconds)
4626 inLen [ I ] - Reserved for future use (set to 0)
4627 pIn [ I ] - Reserved for future use (set to 0)
4628 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4629 contain, upon output the number of BYTEs copied
4630 to pOut
4631 pOut [ O ] - Output buffer
4632
4633 RETURN VALUE:
4634 ULONG - Return code
4635 ===========================================================================*/
4636 ULONG NASGetRTREConfig(
4637 GOBIHANDLE handle,
4638 ULONG to,
4639 ULONG inLen,
4640 const BYTE * pIn,
4641 ULONG * pOutLen,
4642 BYTE * pOut );
4643
4644 /*===========================================================================
4645 METHOD:
4646 NASSetRTREConfig
4647
4648 DESCRIPTION:
4649 The function sends 'NAS/Set RTRE Config Request' (0x0042)
4650 and returns the response
4651
4652 PARAMETERS:
4653 handle [ I ] - Gobi interface handle
4654 to [ I ] - Timeout for transaction (in milliseconds)
4655 inLen [ I ] - Length of input buffer
4656 pIn [ I ] - Input buffer
4657 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4658 contain, upon output the number of BYTEs copied
4659 to pOut
4660 pOut [ O ] - Output buffer
4661
4662 RETURN VALUE:
4663 ULONG - Return code
4664 ===========================================================================*/
4665 ULONG NASSetRTREConfig(
4666 GOBIHANDLE handle,
4667 ULONG to,
4668 ULONG inLen,
4669 const BYTE * pIn,
4670 ULONG * pOutLen,
4671 BYTE * pOut );
4672
4673 /*===========================================================================
4674 METHOD:
4675 NASGetCellLocationInfo
4676
4677 DESCRIPTION:
4678 The function sends 'NAS/Get Cell Location Info Request' (0x0043)
4679 and returns the response
4680
4681 PARAMETERS:
4682 handle [ I ] - Gobi interface handle
4683 to [ I ] - Timeout for transaction (in milliseconds)
4684 inLen [ I ] - Reserved for future use (set to 0)
4685 pIn [ I ] - Reserved for future use (set to 0)
4686 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4687 contain, upon output the number of BYTEs copied
4688 to pOut
4689 pOut [ O ] - Output buffer
4690
4691 RETURN VALUE:
4692 ULONG - Return code
4693 ===========================================================================*/
4694 ULONG NASGetCellLocationInfo(
4695 GOBIHANDLE handle,
4696 ULONG to,
4697 ULONG inLen,
4698 const BYTE * pIn,
4699 ULONG * pOutLen,
4700 BYTE * pOut );
4701
4702 /*===========================================================================
4703 METHOD:
4704 NASGetPLMNName
4705
4706 DESCRIPTION:
4707 The function sends 'NAS/Get PLMN Name Request' (0x0044)
4708 and returns the response
4709
4710 PARAMETERS:
4711 handle [ I ] - Gobi interface handle
4712 to [ I ] - Timeout for transaction (in milliseconds)
4713 inLen [ I ] - Length of input buffer
4714 pIn [ I ] - Input buffer
4715 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4716 contain, upon output the number of BYTEs copied
4717 to pOut
4718 pOut [ O ] - Output buffer
4719
4720 RETURN VALUE:
4721 ULONG - Return code
4722 ===========================================================================*/
4723 ULONG NASGetPLMNName(
4724 GOBIHANDLE handle,
4725 ULONG to,
4726 ULONG inLen,
4727 const BYTE * pIn,
4728 ULONG * pOutLen,
4729 BYTE * pOut );
4730
4731 /*===========================================================================
4732 METHOD:
4733 NASBindSubscription
4734
4735 DESCRIPTION:
4736 The function sends 'NAS/Bind Subscription Request' (0x0045)
4737 and returns the response
4738
4739 PARAMETERS:
4740 handle [ I ] - Gobi interface handle
4741 to [ I ] - Timeout for transaction (in milliseconds)
4742 inLen [ I ] - Length of input buffer
4743 pIn [ I ] - Input buffer
4744 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4745 contain, upon output the number of BYTEs copied
4746 to pOut
4747 pOut [ O ] - Output buffer
4748
4749 RETURN VALUE:
4750 ULONG - Return code
4751 ===========================================================================*/
4752 ULONG NASBindSubscription(
4753 GOBIHANDLE handle,
4754 ULONG to,
4755 ULONG inLen,
4756 const BYTE * pIn,
4757 ULONG * pOutLen,
4758 BYTE * pOut );
4759
4760 /*===========================================================================
4761 METHOD:
4762 NASGetModePref
4763
4764 DESCRIPTION:
4765 The function sends 'NAS/Get Mode Pref Request' (0x0049)
4766 and returns the response
4767
4768 PARAMETERS:
4769 handle [ I ] - Gobi interface handle
4770 to [ I ] - Timeout for transaction (in milliseconds)
4771 inLen [ I ] - Reserved for future use (set to 0)
4772 pIn [ I ] - Reserved for future use (set to 0)
4773 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4774 contain, upon output the number of BYTEs copied
4775 to pOut
4776 pOut [ O ] - Output buffer
4777
4778 RETURN VALUE:
4779 ULONG - Return code
4780 ===========================================================================*/
4781 ULONG NASGetModePref(
4782 GOBIHANDLE handle,
4783 ULONG to,
4784 ULONG inLen,
4785 const BYTE * pIn,
4786 ULONG * pOutLen,
4787 BYTE * pOut );
4788
4789 /*===========================================================================
4790 METHOD:
4791 NASSetDualStandbyPreference
4792
4793 DESCRIPTION:
4794 The function sends 'NAS/Set Dual Standby Preference Request' (0x004B)
4795 and returns the response
4796
4797 PARAMETERS:
4798 handle [ I ] - Gobi interface handle
4799 to [ I ] - Timeout for transaction (in milliseconds)
4800 inLen [ I ] - Length of input buffer
4801 pIn [ I ] - Input buffer
4802 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4803 contain, upon output the number of BYTEs copied
4804 to pOut
4805 pOut [ O ] - Output buffer
4806
4807 RETURN VALUE:
4808 ULONG - Return code
4809 ===========================================================================*/
4810 ULONG NASSetDualStandbyPreference(
4811 GOBIHANDLE handle,
4812 ULONG to,
4813 ULONG inLen,
4814 const BYTE * pIn,
4815 ULONG * pOutLen,
4816 BYTE * pOut );
4817
4818 /*===========================================================================
4819 METHOD:
4820 NASGetSystemInfo
4821
4822 DESCRIPTION:
4823 The function sends 'NAS/Get System Info Request' (0x004D)
4824 and returns the response
4825
4826 PARAMETERS:
4827 handle [ I ] - Gobi interface handle
4828 to [ I ] - Timeout for transaction (in milliseconds)
4829 inLen [ I ] - Reserved for future use (set to 0)
4830 pIn [ I ] - Reserved for future use (set to 0)
4831 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4832 contain, upon output the number of BYTEs copied
4833 to pOut
4834 pOut [ O ] - Output buffer
4835
4836 RETURN VALUE:
4837 ULONG - Return code
4838 ===========================================================================*/
4839 ULONG NASGetSystemInfo(
4840 GOBIHANDLE handle,
4841 ULONG to,
4842 ULONG inLen,
4843 const BYTE * pIn,
4844 ULONG * pOutLen,
4845 BYTE * pOut );
4846
4847 /*===========================================================================
4848 METHOD:
4849 NASGetSignalInfo
4850
4851 DESCRIPTION:
4852 The function sends 'NAS/Get Signal Info Request' (0x004F)
4853 and returns the response
4854
4855 PARAMETERS:
4856 handle [ I ] - Gobi interface handle
4857 to [ I ] - Timeout for transaction (in milliseconds)
4858 inLen [ I ] - Reserved for future use (set to 0)
4859 pIn [ I ] - Reserved for future use (set to 0)
4860 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4861 contain, upon output the number of BYTEs copied
4862 to pOut
4863 pOut [ O ] - Output buffer
4864
4865 RETURN VALUE:
4866 ULONG - Return code
4867 ===========================================================================*/
4868 ULONG NASGetSignalInfo(
4869 GOBIHANDLE handle,
4870 ULONG to,
4871 ULONG inLen,
4872 const BYTE * pIn,
4873 ULONG * pOutLen,
4874 BYTE * pOut );
4875
4876 /*===========================================================================
4877 METHOD:
4878 NASConfigureSignalInfo
4879
4880 DESCRIPTION:
4881 The function sends 'NAS/Configure Signal Info Request' (0x0050)
4882 and returns the response
4883
4884 PARAMETERS:
4885 handle [ I ] - Gobi interface handle
4886 to [ I ] - Timeout for transaction (in milliseconds)
4887 inLen [ I ] - Length of input buffer
4888 pIn [ I ] - Input buffer
4889 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4890 contain, upon output the number of BYTEs copied
4891 to pOut
4892 pOut [ O ] - Output buffer
4893
4894 RETURN VALUE:
4895 ULONG - Return code
4896 ===========================================================================*/
4897 ULONG NASConfigureSignalInfo(
4898 GOBIHANDLE handle,
4899 ULONG to,
4900 ULONG inLen,
4901 const BYTE * pIn,
4902 ULONG * pOutLen,
4903 BYTE * pOut );
4904
4905 /*===========================================================================
4906 METHOD:
4907 NASGetErrorRate
4908
4909 DESCRIPTION:
4910 The function sends 'NAS/Get Error Rate Request' (0x0052)
4911 and returns the response
4912
4913 PARAMETERS:
4914 handle [ I ] - Gobi interface handle
4915 to [ I ] - Timeout for transaction (in milliseconds)
4916 inLen [ I ] - Reserved for future use (set to 0)
4917 pIn [ I ] - Reserved for future use (set to 0)
4918 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4919 contain, upon output the number of BYTEs copied
4920 to pOut
4921 pOut [ O ] - Output buffer
4922
4923 RETURN VALUE:
4924 ULONG - Return code
4925 ===========================================================================*/
4926 ULONG NASGetErrorRate(
4927 GOBIHANDLE handle,
4928 ULONG to,
4929 ULONG inLen,
4930 const BYTE * pIn,
4931 ULONG * pOutLen,
4932 BYTE * pOut );
4933
4934 /*===========================================================================
4935 METHOD:
4936 NASGetEVDOProtocolSubtype
4937
4938 DESCRIPTION:
4939 The function sends 'NAS/Get EV-DO Protocol Subtype Request' (0x0056)
4940 and returns the response
4941
4942 PARAMETERS:
4943 handle [ I ] - Gobi interface handle
4944 to [ I ] - Timeout for transaction (in milliseconds)
4945 inLen [ I ] - Length of input buffer
4946 pIn [ I ] - Input buffer
4947 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4948 contain, upon output the number of BYTEs copied
4949 to pOut
4950 pOut [ O ] - Output buffer
4951
4952 RETURN VALUE:
4953 ULONG - Return code
4954 ===========================================================================*/
4955 ULONG NASGetEVDOProtocolSubtype(
4956 GOBIHANDLE handle,
4957 ULONG to,
4958 ULONG inLen,
4959 const BYTE * pIn,
4960 ULONG * pOutLen,
4961 BYTE * pOut );
4962
4963 /*===========================================================================
4964 METHOD:
4965 NASGetEVDOColorCode
4966
4967 DESCRIPTION:
4968 The function sends 'NAS/Get EV-DO Color Code Request' (0x0057)
4969 and returns the response
4970
4971 PARAMETERS:
4972 handle [ I ] - Gobi interface handle
4973 to [ I ] - Timeout for transaction (in milliseconds)
4974 inLen [ I ] - Reserved for future use (set to 0)
4975 pIn [ I ] - Reserved for future use (set to 0)
4976 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
4977 contain, upon output the number of BYTEs copied
4978 to pOut
4979 pOut [ O ] - Output buffer
4980
4981 RETURN VALUE:
4982 ULONG - Return code
4983 ===========================================================================*/
4984 ULONG NASGetEVDOColorCode(
4985 GOBIHANDLE handle,
4986 ULONG to,
4987 ULONG inLen,
4988 const BYTE * pIn,
4989 ULONG * pOutLen,
4990 BYTE * pOut );
4991
4992 /*===========================================================================
4993 METHOD:
4994 NASGetAcquisitionSystemMode
4995
4996 DESCRIPTION:
4997 The function sends 'NAS/Get Acquisition System Mode Request' (0x0058)
4998 and returns the response
4999
5000 PARAMETERS:
5001 handle [ I ] - Gobi interface handle
5002 to [ I ] - Timeout for transaction (in milliseconds)
5003 inLen [ I ] - Reserved for future use (set to 0)
5004 pIn [ I ] - Reserved for future use (set to 0)
5005 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5006 contain, upon output the number of BYTEs copied
5007 to pOut
5008 pOut [ O ] - Output buffer
5009
5010 RETURN VALUE:
5011 ULONG - Return code
5012 ===========================================================================*/
5013 ULONG NASGetAcquisitionSystemMode(
5014 GOBIHANDLE handle,
5015 ULONG to,
5016 ULONG inLen,
5017 const BYTE * pIn,
5018 ULONG * pOutLen,
5019 BYTE * pOut );
5020
5021 /*===========================================================================
5022 METHOD:
5023 NASSetRXDiversity
5024
5025 DESCRIPTION:
5026 The function sends 'NAS/Set RX Diversity Request' (0x0059)
5027 and returns the response
5028
5029 PARAMETERS:
5030 handle [ I ] - Gobi interface handle
5031 to [ I ] - Timeout for transaction (in milliseconds)
5032 inLen [ I ] - Length of input buffer
5033 pIn [ I ] - Input buffer
5034 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5035 contain, upon output the number of BYTEs copied
5036 to pOut
5037 pOut [ O ] - Output buffer
5038
5039 RETURN VALUE:
5040 ULONG - Return code
5041 ===========================================================================*/
5042 ULONG NASSetRXDiversity(
5043 GOBIHANDLE handle,
5044 ULONG to,
5045 ULONG inLen,
5046 const BYTE * pIn,
5047 ULONG * pOutLen,
5048 BYTE * pOut );
5049
5050 /*===========================================================================
5051 METHOD:
5052 NASGetRXTXInfo
5053
5054 DESCRIPTION:
5055 The function sends 'NAS/Get RX/TX Info Request' (0x005A)
5056 and returns the response
5057
5058 PARAMETERS:
5059 handle [ I ] - Gobi interface handle
5060 to [ I ] - Timeout for transaction (in milliseconds)
5061 inLen [ I ] - Reserved for future use (set to 0)
5062 pIn [ I ] - Reserved for future use (set to 0)
5063 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5064 contain, upon output the number of BYTEs copied
5065 to pOut
5066 pOut [ O ] - Output buffer
5067
5068 RETURN VALUE:
5069 ULONG - Return code
5070 ===========================================================================*/
5071 ULONG NASGetRXTXInfo(
5072 GOBIHANDLE handle,
5073 ULONG to,
5074 ULONG inLen,
5075 const BYTE * pIn,
5076 ULONG * pOutLen,
5077 BYTE * pOut );
5078
5079 /*===========================================================================
5080 METHOD:
5081 NASUpdateAKEYExtended
5082
5083 DESCRIPTION:
5084 The function sends 'NAS/Update A-KEY Extended Request' (0x005B)
5085 and returns the response
5086
5087 PARAMETERS:
5088 handle [ I ] - Gobi interface handle
5089 to [ I ] - Timeout for transaction (in milliseconds)
5090 inLen [ I ] - Length of input buffer
5091 pIn [ I ] - Input buffer
5092 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5093 contain, upon output the number of BYTEs copied
5094 to pOut
5095 pOut [ O ] - Output buffer
5096
5097 RETURN VALUE:
5098 ULONG - Return code
5099 ===========================================================================*/
5100 ULONG NASUpdateAKEYExtended(
5101 GOBIHANDLE handle,
5102 ULONG to,
5103 ULONG inLen,
5104 const BYTE * pIn,
5105 ULONG * pOutLen,
5106 BYTE * pOut );
5107
5108 /*===========================================================================
5109 METHOD:
5110 NASGetDualStandbyPreference
5111
5112 DESCRIPTION:
5113 The function sends 'NAS/Get Dual Standby Preference Request' (0x005C)
5114 and returns the response
5115
5116 PARAMETERS:
5117 handle [ I ] - Gobi interface handle
5118 to [ I ] - Timeout for transaction (in milliseconds)
5119 inLen [ I ] - Reserved for future use (set to 0)
5120 pIn [ I ] - Reserved for future use (set to 0)
5121 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5122 contain, upon output the number of BYTEs copied
5123 to pOut
5124 pOut [ O ] - Output buffer
5125
5126 RETURN VALUE:
5127 ULONG - Return code
5128 ===========================================================================*/
5129 ULONG NASGetDualStandbyPreference(
5130 GOBIHANDLE handle,
5131 ULONG to,
5132 ULONG inLen,
5133 const BYTE * pIn,
5134 ULONG * pOutLen,
5135 BYTE * pOut );
5136
5137 /*===========================================================================
5138 METHOD:
5139 NASDetachLTE
5140
5141 DESCRIPTION:
5142 The function sends 'NAS/Detach LTE Request' (0x005D)
5143 and returns the response
5144
5145 PARAMETERS:
5146 handle [ I ] - Gobi interface handle
5147 to [ I ] - Timeout for transaction (in milliseconds)
5148 inLen [ I ] - Reserved for future use (set to 0)
5149 pIn [ I ] - Reserved for future use (set to 0)
5150 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5151 contain, upon output the number of BYTEs copied
5152 to pOut
5153 pOut [ O ] - Output buffer
5154
5155 RETURN VALUE:
5156 ULONG - Return code
5157 ===========================================================================*/
5158 ULONG NASDetachLTE(
5159 GOBIHANDLE handle,
5160 ULONG to,
5161 ULONG inLen,
5162 const BYTE * pIn,
5163 ULONG * pOutLen,
5164 BYTE * pOut );
5165
5166 /*===========================================================================
5167 METHOD:
5168 NASBlockLTEPLMN
5169
5170 DESCRIPTION:
5171 The function sends 'NAS/Block LTE PLMN Request' (0x005E)
5172 and returns the response
5173
5174 PARAMETERS:
5175 handle [ I ] - Gobi interface handle
5176 to [ I ] - Timeout for transaction (in milliseconds)
5177 inLen [ I ] - Length of input buffer
5178 pIn [ I ] - Input buffer
5179 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5180 contain, upon output the number of BYTEs copied
5181 to pOut
5182 pOut [ O ] - Output buffer
5183
5184 RETURN VALUE:
5185 ULONG - Return code
5186 ===========================================================================*/
5187 ULONG NASBlockLTEPLMN(
5188 GOBIHANDLE handle,
5189 ULONG to,
5190 ULONG inLen,
5191 const BYTE * pIn,
5192 ULONG * pOutLen,
5193 BYTE * pOut );
5194
5195 /*===========================================================================
5196 METHOD:
5197 NASUnblockLTEPLMN
5198
5199 DESCRIPTION:
5200 The function sends 'NAS/Unblock LTE PLMN Request' (0x005F)
5201 and returns the response
5202
5203 PARAMETERS:
5204 handle [ I ] - Gobi interface handle
5205 to [ I ] - Timeout for transaction (in milliseconds)
5206 inLen [ I ] - Length of input buffer
5207 pIn [ I ] - Input buffer
5208 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5209 contain, upon output the number of BYTEs copied
5210 to pOut
5211 pOut [ O ] - Output buffer
5212
5213 RETURN VALUE:
5214 ULONG - Return code
5215 ===========================================================================*/
5216 ULONG NASUnblockLTEPLMN(
5217 GOBIHANDLE handle,
5218 ULONG to,
5219 ULONG inLen,
5220 const BYTE * pIn,
5221 ULONG * pOutLen,
5222 BYTE * pOut );
5223
5224 /*===========================================================================
5225 METHOD:
5226 NASResetLTEPLMNBlock
5227
5228 DESCRIPTION:
5229 The function sends 'NAS/Reset LTE PLMN Block Request' (0x0060)
5230 and returns the response
5231
5232 PARAMETERS:
5233 handle [ I ] - Gobi interface handle
5234 to [ I ] - Timeout for transaction (in milliseconds)
5235 inLen [ I ] - Reserved for future use (set to 0)
5236 pIn [ I ] - Reserved for future use (set to 0)
5237 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5238 contain, upon output the number of BYTEs copied
5239 to pOut
5240 pOut [ O ] - Output buffer
5241
5242 RETURN VALUE:
5243 ULONG - Return code
5244 ===========================================================================*/
5245 ULONG NASResetLTEPLMNBlock(
5246 GOBIHANDLE handle,
5247 ULONG to,
5248 ULONG inLen,
5249 const BYTE * pIn,
5250 ULONG * pOutLen,
5251 BYTE * pOut );
5252
5253 /*===========================================================================
5254 METHOD:
5255 NASConfigureEMBMS
5256
5257 DESCRIPTION:
5258 The function sends 'NAS/Configure EMBMS Request' (0x0062)
5259 and returns the response
5260
5261 PARAMETERS:
5262 handle [ I ] - Gobi interface handle
5263 to [ I ] - Timeout for transaction (in milliseconds)
5264 inLen [ I ] - Length of input buffer
5265 pIn [ I ] - Input buffer
5266 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5267 contain, upon output the number of BYTEs copied
5268 to pOut
5269 pOut [ O ] - Output buffer
5270
5271 RETURN VALUE:
5272 ULONG - Return code
5273 ===========================================================================*/
5274 ULONG NASConfigureEMBMS(
5275 GOBIHANDLE handle,
5276 ULONG to,
5277 ULONG inLen,
5278 const BYTE * pIn,
5279 ULONG * pOutLen,
5280 BYTE * pOut );
5281
5282 /*===========================================================================
5283 METHOD:
5284 NASGetEMBMSStatus
5285
5286 DESCRIPTION:
5287 The function sends 'NAS/Get EMBMS Status Request' (0x0063)
5288 and returns the response
5289
5290 PARAMETERS:
5291 handle [ I ] - Gobi interface handle
5292 to [ I ] - Timeout for transaction (in milliseconds)
5293 inLen [ I ] - Reserved for future use (set to 0)
5294 pIn [ I ] - Reserved for future use (set to 0)
5295 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5296 contain, upon output the number of BYTEs copied
5297 to pOut
5298 pOut [ O ] - Output buffer
5299
5300 RETURN VALUE:
5301 ULONG - Return code
5302 ===========================================================================*/
5303 ULONG NASGetEMBMSStatus(
5304 GOBIHANDLE handle,
5305 ULONG to,
5306 ULONG inLen,
5307 const BYTE * pIn,
5308 ULONG * pOutLen,
5309 BYTE * pOut );
5310
5311 /*===========================================================================
5312 METHOD:
5313 NASGetCDMAPositionInfo
5314
5315 DESCRIPTION:
5316 The function sends 'NAS/Get CDMA Position Info Request' (0x0065)
5317 and returns the response
5318
5319 PARAMETERS:
5320 handle [ I ] - Gobi interface handle
5321 to [ I ] - Timeout for transaction (in milliseconds)
5322 inLen [ I ] - Reserved for future use (set to 0)
5323 pIn [ I ] - Reserved for future use (set to 0)
5324 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5325 contain, upon output the number of BYTEs copied
5326 to pOut
5327 pOut [ O ] - Output buffer
5328
5329 RETURN VALUE:
5330 ULONG - Return code
5331 ===========================================================================*/
5332 ULONG NASGetCDMAPositionInfo(
5333 GOBIHANDLE handle,
5334 ULONG to,
5335 ULONG inLen,
5336 const BYTE * pIn,
5337 ULONG * pOutLen,
5338 BYTE * pOut );
5339
5340 /*===========================================================================
5341 METHOD:
5342 NASForceNetworkSearch
5343
5344 DESCRIPTION:
5345 The function sends 'NAS/Force Network Search Request' (0x0067)
5346 and returns the response
5347
5348 PARAMETERS:
5349 handle [ I ] - Gobi interface handle
5350 to [ I ] - Timeout for transaction (in milliseconds)
5351 inLen [ I ] - Reserved for future use (set to 0)
5352 pIn [ I ] - Reserved for future use (set to 0)
5353 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5354 contain, upon output the number of BYTEs copied
5355 to pOut
5356 pOut [ O ] - Output buffer
5357
5358 RETURN VALUE:
5359 ULONG - Return code
5360 ===========================================================================*/
5361 ULONG NASForceNetworkSearch(
5362 GOBIHANDLE handle,
5363 ULONG to,
5364 ULONG inLen,
5365 const BYTE * pIn,
5366 ULONG * pOutLen,
5367 BYTE * pOut );
5368
5369 /*===========================================================================
5370 METHOD:
5371 NASGetManagedRoamingConfig
5372
5373 DESCRIPTION:
5374 The function sends 'NAS/Get Managed Roaming Config Request' (0x0069)
5375 and returns the response
5376
5377 PARAMETERS:
5378 handle [ I ] - Gobi interface handle
5379 to [ I ] - Timeout for transaction (in milliseconds)
5380 inLen [ I ] - Reserved for future use (set to 0)
5381 pIn [ I ] - Reserved for future use (set to 0)
5382 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5383 contain, upon output the number of BYTEs copied
5384 to pOut
5385 pOut [ O ] - Output buffer
5386
5387 RETURN VALUE:
5388 ULONG - Return code
5389 ===========================================================================*/
5390 ULONG NASGetManagedRoamingConfig(
5391 GOBIHANDLE handle,
5392 ULONG to,
5393 ULONG inLen,
5394 const BYTE * pIn,
5395 ULONG * pOutLen,
5396 BYTE * pOut );
5397
5398 /*===========================================================================
5399 METHOD:
5400 NASGetCentralizedEONSSupport
5401
5402 DESCRIPTION:
5403 The function sends 'NAS/Get Centralized EONS Support Request' (0x006B)
5404 and returns the response
5405
5406 PARAMETERS:
5407 handle [ I ] - Gobi interface handle
5408 to [ I ] - Timeout for transaction (in milliseconds)
5409 inLen [ I ] - Reserved for future use (set to 0)
5410 pIn [ I ] - Reserved for future use (set to 0)
5411 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5412 contain, upon output the number of BYTEs copied
5413 to pOut
5414 pOut [ O ] - Output buffer
5415
5416 RETURN VALUE:
5417 ULONG - Return code
5418 ===========================================================================*/
5419 ULONG NASGetCentralizedEONSSupport(
5420 GOBIHANDLE handle,
5421 ULONG to,
5422 ULONG inLen,
5423 const BYTE * pIn,
5424 ULONG * pOutLen,
5425 BYTE * pOut );
5426
5427 /*===========================================================================
5428 METHOD:
5429 WMSReset
5430
5431 DESCRIPTION:
5432 The function sends 'WMS/Reset Request' (0x0000)
5433 and returns the response
5434
5435 PARAMETERS:
5436 handle [ I ] - Gobi interface handle
5437 to [ I ] - Timeout for transaction (in milliseconds)
5438 inLen [ I ] - Reserved for future use (set to 0)
5439 pIn [ I ] - Reserved for future use (set to 0)
5440 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5441 contain, upon output the number of BYTEs copied
5442 to pOut
5443 pOut [ O ] - Output buffer
5444
5445 RETURN VALUE:
5446 ULONG - Return code
5447 ===========================================================================*/
5448 ULONG WMSReset(
5449 GOBIHANDLE handle,
5450 ULONG to,
5451 ULONG inLen,
5452 const BYTE * pIn,
5453 ULONG * pOutLen,
5454 BYTE * pOut );
5455
5456 /*===========================================================================
5457 METHOD:
5458 WMSSetEventReport
5459
5460 DESCRIPTION:
5461 The function sends 'WMS/Set Event Report Request' (0x0001)
5462 and returns the response
5463
5464 PARAMETERS:
5465 handle [ I ] - Gobi interface handle
5466 to [ I ] - Timeout for transaction (in milliseconds)
5467 inLen [ I ] - Length of input buffer
5468 pIn [ I ] - Input buffer
5469 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5470 contain, upon output the number of BYTEs copied
5471 to pOut
5472 pOut [ O ] - Output buffer
5473
5474 RETURN VALUE:
5475 ULONG - Return code
5476 ===========================================================================*/
5477 ULONG WMSSetEventReport(
5478 GOBIHANDLE handle,
5479 ULONG to,
5480 ULONG inLen,
5481 const BYTE * pIn,
5482 ULONG * pOutLen,
5483 BYTE * pOut );
5484
5485 /*===========================================================================
5486 METHOD:
5487 WMSRawSend
5488
5489 DESCRIPTION:
5490 The function sends 'WMS/Raw Send Request' (0x0020)
5491 and returns the response
5492
5493 PARAMETERS:
5494 handle [ I ] - Gobi interface handle
5495 to [ I ] - Timeout for transaction (in milliseconds)
5496 inLen [ I ] - Length of input buffer
5497 pIn [ I ] - Input buffer
5498 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5499 contain, upon output the number of BYTEs copied
5500 to pOut
5501 pOut [ O ] - Output buffer
5502
5503 RETURN VALUE:
5504 ULONG - Return code
5505 ===========================================================================*/
5506 ULONG WMSRawSend(
5507 GOBIHANDLE handle,
5508 ULONG to,
5509 ULONG inLen,
5510 const BYTE * pIn,
5511 ULONG * pOutLen,
5512 BYTE * pOut );
5513
5514 /*===========================================================================
5515 METHOD:
5516 WMSRawWrite
5517
5518 DESCRIPTION:
5519 The function sends 'WMS/Raw Write Request' (0x0021)
5520 and returns the response
5521
5522 PARAMETERS:
5523 handle [ I ] - Gobi interface handle
5524 to [ I ] - Timeout for transaction (in milliseconds)
5525 inLen [ I ] - Length of input buffer
5526 pIn [ I ] - Input buffer
5527 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5528 contain, upon output the number of BYTEs copied
5529 to pOut
5530 pOut [ O ] - Output buffer
5531
5532 RETURN VALUE:
5533 ULONG - Return code
5534 ===========================================================================*/
5535 ULONG WMSRawWrite(
5536 GOBIHANDLE handle,
5537 ULONG to,
5538 ULONG inLen,
5539 const BYTE * pIn,
5540 ULONG * pOutLen,
5541 BYTE * pOut );
5542
5543 /*===========================================================================
5544 METHOD:
5545 WMSRawRead
5546
5547 DESCRIPTION:
5548 The function sends 'WMS/Raw Read Request' (0x0022)
5549 and returns the response
5550
5551 PARAMETERS:
5552 handle [ I ] - Gobi interface handle
5553 to [ I ] - Timeout for transaction (in milliseconds)
5554 inLen [ I ] - Length of input buffer
5555 pIn [ I ] - Input buffer
5556 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5557 contain, upon output the number of BYTEs copied
5558 to pOut
5559 pOut [ O ] - Output buffer
5560
5561 RETURN VALUE:
5562 ULONG - Return code
5563 ===========================================================================*/
5564 ULONG WMSRawRead(
5565 GOBIHANDLE handle,
5566 ULONG to,
5567 ULONG inLen,
5568 const BYTE * pIn,
5569 ULONG * pOutLen,
5570 BYTE * pOut );
5571
5572 /*===========================================================================
5573 METHOD:
5574 WMSModifyTag
5575
5576 DESCRIPTION:
5577 The function sends 'WMS/Modify Tag Request' (0x0023)
5578 and returns the response
5579
5580 PARAMETERS:
5581 handle [ I ] - Gobi interface handle
5582 to [ I ] - Timeout for transaction (in milliseconds)
5583 inLen [ I ] - Length of input buffer
5584 pIn [ I ] - Input buffer
5585 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5586 contain, upon output the number of BYTEs copied
5587 to pOut
5588 pOut [ O ] - Output buffer
5589
5590 RETURN VALUE:
5591 ULONG - Return code
5592 ===========================================================================*/
5593 ULONG WMSModifyTag(
5594 GOBIHANDLE handle,
5595 ULONG to,
5596 ULONG inLen,
5597 const BYTE * pIn,
5598 ULONG * pOutLen,
5599 BYTE * pOut );
5600
5601 /*===========================================================================
5602 METHOD:
5603 WMSDelete
5604
5605 DESCRIPTION:
5606 The function sends 'WMS/Delete Request' (0x0024)
5607 and returns the response
5608
5609 PARAMETERS:
5610 handle [ I ] - Gobi interface handle
5611 to [ I ] - Timeout for transaction (in milliseconds)
5612 inLen [ I ] - Length of input buffer
5613 pIn [ I ] - Input buffer
5614 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5615 contain, upon output the number of BYTEs copied
5616 to pOut
5617 pOut [ O ] - Output buffer
5618
5619 RETURN VALUE:
5620 ULONG - Return code
5621 ===========================================================================*/
5622 ULONG WMSDelete(
5623 GOBIHANDLE handle,
5624 ULONG to,
5625 ULONG inLen,
5626 const BYTE * pIn,
5627 ULONG * pOutLen,
5628 BYTE * pOut );
5629
5630 /*===========================================================================
5631 METHOD:
5632 WMSGetMessageProtocol
5633
5634 DESCRIPTION:
5635 The function sends 'WMS/Get Message Protocol Request' (0x0030)
5636 and returns the response
5637
5638 PARAMETERS:
5639 handle [ I ] - Gobi interface handle
5640 to [ I ] - Timeout for transaction (in milliseconds)
5641 inLen [ I ] - Reserved for future use (set to 0)
5642 pIn [ I ] - Reserved for future use (set to 0)
5643 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5644 contain, upon output the number of BYTEs copied
5645 to pOut
5646 pOut [ O ] - Output buffer
5647
5648 RETURN VALUE:
5649 ULONG - Return code
5650 ===========================================================================*/
5651 ULONG WMSGetMessageProtocol(
5652 GOBIHANDLE handle,
5653 ULONG to,
5654 ULONG inLen,
5655 const BYTE * pIn,
5656 ULONG * pOutLen,
5657 BYTE * pOut );
5658
5659 /*===========================================================================
5660 METHOD:
5661 WMSListMessages
5662
5663 DESCRIPTION:
5664 The function sends 'WMS/List Messages Request' (0x0031)
5665 and returns the response
5666
5667 PARAMETERS:
5668 handle [ I ] - Gobi interface handle
5669 to [ I ] - Timeout for transaction (in milliseconds)
5670 inLen [ I ] - Length of input buffer
5671 pIn [ I ] - Input buffer
5672 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5673 contain, upon output the number of BYTEs copied
5674 to pOut
5675 pOut [ O ] - Output buffer
5676
5677 RETURN VALUE:
5678 ULONG - Return code
5679 ===========================================================================*/
5680 ULONG WMSListMessages(
5681 GOBIHANDLE handle,
5682 ULONG to,
5683 ULONG inLen,
5684 const BYTE * pIn,
5685 ULONG * pOutLen,
5686 BYTE * pOut );
5687
5688 /*===========================================================================
5689 METHOD:
5690 WMSSetRoutes
5691
5692 DESCRIPTION:
5693 The function sends 'WMS/Set Routes Request' (0x0032)
5694 and returns the response
5695
5696 PARAMETERS:
5697 handle [ I ] - Gobi interface handle
5698 to [ I ] - Timeout for transaction (in milliseconds)
5699 inLen [ I ] - Length of input buffer
5700 pIn [ I ] - Input buffer
5701 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5702 contain, upon output the number of BYTEs copied
5703 to pOut
5704 pOut [ O ] - Output buffer
5705
5706 RETURN VALUE:
5707 ULONG - Return code
5708 ===========================================================================*/
5709 ULONG WMSSetRoutes(
5710 GOBIHANDLE handle,
5711 ULONG to,
5712 ULONG inLen,
5713 const BYTE * pIn,
5714 ULONG * pOutLen,
5715 BYTE * pOut );
5716
5717 /*===========================================================================
5718 METHOD:
5719 WMSGetRoutes
5720
5721 DESCRIPTION:
5722 The function sends 'WMS/Get Routes Request' (0x0033)
5723 and returns the response
5724
5725 PARAMETERS:
5726 handle [ I ] - Gobi interface handle
5727 to [ I ] - Timeout for transaction (in milliseconds)
5728 inLen [ I ] - Reserved for future use (set to 0)
5729 pIn [ I ] - Reserved for future use (set to 0)
5730 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5731 contain, upon output the number of BYTEs copied
5732 to pOut
5733 pOut [ O ] - Output buffer
5734
5735 RETURN VALUE:
5736 ULONG - Return code
5737 ===========================================================================*/
5738 ULONG WMSGetRoutes(
5739 GOBIHANDLE handle,
5740 ULONG to,
5741 ULONG inLen,
5742 const BYTE * pIn,
5743 ULONG * pOutLen,
5744 BYTE * pOut );
5745
5746 /*===========================================================================
5747 METHOD:
5748 WMSGetSMSCAddress
5749
5750 DESCRIPTION:
5751 The function sends 'WMS/Get SMSC Address Request' (0x0034)
5752 and returns the response
5753
5754 PARAMETERS:
5755 handle [ I ] - Gobi interface handle
5756 to [ I ] - Timeout for transaction (in milliseconds)
5757 inLen [ I ] - Reserved for future use (set to 0)
5758 pIn [ I ] - Reserved for future use (set to 0)
5759 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5760 contain, upon output the number of BYTEs copied
5761 to pOut
5762 pOut [ O ] - Output buffer
5763
5764 RETURN VALUE:
5765 ULONG - Return code
5766 ===========================================================================*/
5767 ULONG WMSGetSMSCAddress(
5768 GOBIHANDLE handle,
5769 ULONG to,
5770 ULONG inLen,
5771 const BYTE * pIn,
5772 ULONG * pOutLen,
5773 BYTE * pOut );
5774
5775 /*===========================================================================
5776 METHOD:
5777 WMSSetSMSCAddress
5778
5779 DESCRIPTION:
5780 The function sends 'WMS/Set SMSC Address Request' (0x0035)
5781 and returns the response
5782
5783 PARAMETERS:
5784 handle [ I ] - Gobi interface handle
5785 to [ I ] - Timeout for transaction (in milliseconds)
5786 inLen [ I ] - Length of input buffer
5787 pIn [ I ] - Input buffer
5788 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5789 contain, upon output the number of BYTEs copied
5790 to pOut
5791 pOut [ O ] - Output buffer
5792
5793 RETURN VALUE:
5794 ULONG - Return code
5795 ===========================================================================*/
5796 ULONG WMSSetSMSCAddress(
5797 GOBIHANDLE handle,
5798 ULONG to,
5799 ULONG inLen,
5800 const BYTE * pIn,
5801 ULONG * pOutLen,
5802 BYTE * pOut );
5803
5804 /*===========================================================================
5805 METHOD:
5806 WMSGetStorageMaxSize
5807
5808 DESCRIPTION:
5809 The function sends 'WMS/Get Storage Max Size Request' (0x0036)
5810 and returns the response
5811
5812 PARAMETERS:
5813 handle [ I ] - Gobi interface handle
5814 to [ I ] - Timeout for transaction (in milliseconds)
5815 inLen [ I ] - Length of input buffer
5816 pIn [ I ] - Input buffer
5817 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5818 contain, upon output the number of BYTEs copied
5819 to pOut
5820 pOut [ O ] - Output buffer
5821
5822 RETURN VALUE:
5823 ULONG - Return code
5824 ===========================================================================*/
5825 ULONG WMSGetStorageMaxSize(
5826 GOBIHANDLE handle,
5827 ULONG to,
5828 ULONG inLen,
5829 const BYTE * pIn,
5830 ULONG * pOutLen,
5831 BYTE * pOut );
5832
5833 /*===========================================================================
5834 METHOD:
5835 WMSSendACK
5836
5837 DESCRIPTION:
5838 The function sends 'WMS/Send ACK Request' (0x0037)
5839 and returns the response
5840
5841 PARAMETERS:
5842 handle [ I ] - Gobi interface handle
5843 to [ I ] - Timeout for transaction (in milliseconds)
5844 inLen [ I ] - Length of input buffer
5845 pIn [ I ] - Input buffer
5846 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5847 contain, upon output the number of BYTEs copied
5848 to pOut
5849 pOut [ O ] - Output buffer
5850
5851 RETURN VALUE:
5852 ULONG - Return code
5853 ===========================================================================*/
5854 ULONG WMSSendACK(
5855 GOBIHANDLE handle,
5856 ULONG to,
5857 ULONG inLen,
5858 const BYTE * pIn,
5859 ULONG * pOutLen,
5860 BYTE * pOut );
5861
5862 /*===========================================================================
5863 METHOD:
5864 WMSSetRetryPeriod
5865
5866 DESCRIPTION:
5867 The function sends 'WMS/Set Retry Period Request' (0x0038)
5868 and returns the response
5869
5870 PARAMETERS:
5871 handle [ I ] - Gobi interface handle
5872 to [ I ] - Timeout for transaction (in milliseconds)
5873 inLen [ I ] - Length of input buffer
5874 pIn [ I ] - Input buffer
5875 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5876 contain, upon output the number of BYTEs copied
5877 to pOut
5878 pOut [ O ] - Output buffer
5879
5880 RETURN VALUE:
5881 ULONG - Return code
5882 ===========================================================================*/
5883 ULONG WMSSetRetryPeriod(
5884 GOBIHANDLE handle,
5885 ULONG to,
5886 ULONG inLen,
5887 const BYTE * pIn,
5888 ULONG * pOutLen,
5889 BYTE * pOut );
5890
5891 /*===========================================================================
5892 METHOD:
5893 WMSSetRetryInterval
5894
5895 DESCRIPTION:
5896 The function sends 'WMS/Set Retry Interval Request' (0x0039)
5897 and returns the response
5898
5899 PARAMETERS:
5900 handle [ I ] - Gobi interface handle
5901 to [ I ] - Timeout for transaction (in milliseconds)
5902 inLen [ I ] - Length of input buffer
5903 pIn [ I ] - Input buffer
5904 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5905 contain, upon output the number of BYTEs copied
5906 to pOut
5907 pOut [ O ] - Output buffer
5908
5909 RETURN VALUE:
5910 ULONG - Return code
5911 ===========================================================================*/
5912 ULONG WMSSetRetryInterval(
5913 GOBIHANDLE handle,
5914 ULONG to,
5915 ULONG inLen,
5916 const BYTE * pIn,
5917 ULONG * pOutLen,
5918 BYTE * pOut );
5919
5920 /*===========================================================================
5921 METHOD:
5922 WMSSetDCDisconnectTimer
5923
5924 DESCRIPTION:
5925 The function sends 'WMS/Set DC Disconnect Timer Request' (0x003A)
5926 and returns the response
5927
5928 PARAMETERS:
5929 handle [ I ] - Gobi interface handle
5930 to [ I ] - Timeout for transaction (in milliseconds)
5931 inLen [ I ] - Length of input buffer
5932 pIn [ I ] - Input buffer
5933 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5934 contain, upon output the number of BYTEs copied
5935 to pOut
5936 pOut [ O ] - Output buffer
5937
5938 RETURN VALUE:
5939 ULONG - Return code
5940 ===========================================================================*/
5941 ULONG WMSSetDCDisconnectTimer(
5942 GOBIHANDLE handle,
5943 ULONG to,
5944 ULONG inLen,
5945 const BYTE * pIn,
5946 ULONG * pOutLen,
5947 BYTE * pOut );
5948
5949 /*===========================================================================
5950 METHOD:
5951 WMSSetMemoryStatus
5952
5953 DESCRIPTION:
5954 The function sends 'WMS/Set Memory Status Request' (0x003B)
5955 and returns the response
5956
5957 PARAMETERS:
5958 handle [ I ] - Gobi interface handle
5959 to [ I ] - Timeout for transaction (in milliseconds)
5960 inLen [ I ] - Length of input buffer
5961 pIn [ I ] - Input buffer
5962 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5963 contain, upon output the number of BYTEs copied
5964 to pOut
5965 pOut [ O ] - Output buffer
5966
5967 RETURN VALUE:
5968 ULONG - Return code
5969 ===========================================================================*/
5970 ULONG WMSSetMemoryStatus(
5971 GOBIHANDLE handle,
5972 ULONG to,
5973 ULONG inLen,
5974 const BYTE * pIn,
5975 ULONG * pOutLen,
5976 BYTE * pOut );
5977
5978 /*===========================================================================
5979 METHOD:
5980 WMSSetBroadcastActivation
5981
5982 DESCRIPTION:
5983 The function sends 'WMS/Set Broadcast Activation Request' (0x003C)
5984 and returns the response
5985
5986 PARAMETERS:
5987 handle [ I ] - Gobi interface handle
5988 to [ I ] - Timeout for transaction (in milliseconds)
5989 inLen [ I ] - Length of input buffer
5990 pIn [ I ] - Input buffer
5991 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
5992 contain, upon output the number of BYTEs copied
5993 to pOut
5994 pOut [ O ] - Output buffer
5995
5996 RETURN VALUE:
5997 ULONG - Return code
5998 ===========================================================================*/
5999 ULONG WMSSetBroadcastActivation(
6000 GOBIHANDLE handle,
6001 ULONG to,
6002 ULONG inLen,
6003 const BYTE * pIn,
6004 ULONG * pOutLen,
6005 BYTE * pOut );
6006
6007 /*===========================================================================
6008 METHOD:
6009 WMSSetBroadcastConfig
6010
6011 DESCRIPTION:
6012 The function sends 'WMS/Set Broadcast Config Request' (0x003D)
6013 and returns the response
6014
6015 PARAMETERS:
6016 handle [ I ] - Gobi interface handle
6017 to [ I ] - Timeout for transaction (in milliseconds)
6018 inLen [ I ] - Length of input buffer
6019 pIn [ I ] - Input buffer
6020 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6021 contain, upon output the number of BYTEs copied
6022 to pOut
6023 pOut [ O ] - Output buffer
6024
6025 RETURN VALUE:
6026 ULONG - Return code
6027 ===========================================================================*/
6028 ULONG WMSSetBroadcastConfig(
6029 GOBIHANDLE handle,
6030 ULONG to,
6031 ULONG inLen,
6032 const BYTE * pIn,
6033 ULONG * pOutLen,
6034 BYTE * pOut );
6035
6036 /*===========================================================================
6037 METHOD:
6038 WMSGetBroadcastConfig
6039
6040 DESCRIPTION:
6041 The function sends 'WMS/Get Broadcast Config Request' (0x003E)
6042 and returns the response
6043
6044 PARAMETERS:
6045 handle [ I ] - Gobi interface handle
6046 to [ I ] - Timeout for transaction (in milliseconds)
6047 inLen [ I ] - Length of input buffer
6048 pIn [ I ] - Input buffer
6049 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6050 contain, upon output the number of BYTEs copied
6051 to pOut
6052 pOut [ O ] - Output buffer
6053
6054 RETURN VALUE:
6055 ULONG - Return code
6056 ===========================================================================*/
6057 ULONG WMSGetBroadcastConfig(
6058 GOBIHANDLE handle,
6059 ULONG to,
6060 ULONG inLen,
6061 const BYTE * pIn,
6062 ULONG * pOutLen,
6063 BYTE * pOut );
6064
6065 /*===========================================================================
6066 METHOD:
6067 WMSGetDomainPreference
6068
6069 DESCRIPTION:
6070 The function sends 'WMS/Get Domain Preference Request' (0x0040)
6071 and returns the response
6072
6073 PARAMETERS:
6074 handle [ I ] - Gobi interface handle
6075 to [ I ] - Timeout for transaction (in milliseconds)
6076 inLen [ I ] - Reserved for future use (set to 0)
6077 pIn [ I ] - Reserved for future use (set to 0)
6078 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6079 contain, upon output the number of BYTEs copied
6080 to pOut
6081 pOut [ O ] - Output buffer
6082
6083 RETURN VALUE:
6084 ULONG - Return code
6085 ===========================================================================*/
6086 ULONG WMSGetDomainPreference(
6087 GOBIHANDLE handle,
6088 ULONG to,
6089 ULONG inLen,
6090 const BYTE * pIn,
6091 ULONG * pOutLen,
6092 BYTE * pOut );
6093
6094 /*===========================================================================
6095 METHOD:
6096 WMSSetDomainPreference
6097
6098 DESCRIPTION:
6099 The function sends 'WMS/Set Domain Preference Request' (0x0041)
6100 and returns the response
6101
6102 PARAMETERS:
6103 handle [ I ] - Gobi interface handle
6104 to [ I ] - Timeout for transaction (in milliseconds)
6105 inLen [ I ] - Length of input buffer
6106 pIn [ I ] - Input buffer
6107 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6108 contain, upon output the number of BYTEs copied
6109 to pOut
6110 pOut [ O ] - Output buffer
6111
6112 RETURN VALUE:
6113 ULONG - Return code
6114 ===========================================================================*/
6115 ULONG WMSSetDomainPreference(
6116 GOBIHANDLE handle,
6117 ULONG to,
6118 ULONG inLen,
6119 const BYTE * pIn,
6120 ULONG * pOutLen,
6121 BYTE * pOut );
6122
6123 /*===========================================================================
6124 METHOD:
6125 WMSSendFromMemoryStore
6126
6127 DESCRIPTION:
6128 The function sends 'WMS/Send From Memory Store Request' (0x0042)
6129 and returns the response
6130
6131 PARAMETERS:
6132 handle [ I ] - Gobi interface handle
6133 to [ I ] - Timeout for transaction (in milliseconds)
6134 inLen [ I ] - Length of input buffer
6135 pIn [ I ] - Input buffer
6136 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6137 contain, upon output the number of BYTEs copied
6138 to pOut
6139 pOut [ O ] - Output buffer
6140
6141 RETURN VALUE:
6142 ULONG - Return code
6143 ===========================================================================*/
6144 ULONG WMSSendFromMemoryStore(
6145 GOBIHANDLE handle,
6146 ULONG to,
6147 ULONG inLen,
6148 const BYTE * pIn,
6149 ULONG * pOutLen,
6150 BYTE * pOut );
6151
6152 /*===========================================================================
6153 METHOD:
6154 WMSGetWaitingMessage
6155
6156 DESCRIPTION:
6157 The function sends 'WMS/Get Waiting Message Request' (0x0043)
6158 and returns the response
6159
6160 PARAMETERS:
6161 handle [ I ] - Gobi interface handle
6162 to [ I ] - Timeout for transaction (in milliseconds)
6163 inLen [ I ] - Reserved for future use (set to 0)
6164 pIn [ I ] - Reserved for future use (set to 0)
6165 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6166 contain, upon output the number of BYTEs copied
6167 to pOut
6168 pOut [ O ] - Output buffer
6169
6170 RETURN VALUE:
6171 ULONG - Return code
6172 ===========================================================================*/
6173 ULONG WMSGetWaitingMessage(
6174 GOBIHANDLE handle,
6175 ULONG to,
6176 ULONG inLen,
6177 const BYTE * pIn,
6178 ULONG * pOutLen,
6179 BYTE * pOut );
6180
6181 /*===========================================================================
6182 METHOD:
6183 WMSSetPrimaryClient
6184
6185 DESCRIPTION:
6186 The function sends 'WMS/Set Primary Client Request' (0x0045)
6187 and returns the response
6188
6189 PARAMETERS:
6190 handle [ I ] - Gobi interface handle
6191 to [ I ] - Timeout for transaction (in milliseconds)
6192 inLen [ I ] - Length of input buffer
6193 pIn [ I ] - Input buffer
6194 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6195 contain, upon output the number of BYTEs copied
6196 to pOut
6197 pOut [ O ] - Output buffer
6198
6199 RETURN VALUE:
6200 ULONG - Return code
6201 ===========================================================================*/
6202 ULONG WMSSetPrimaryClient(
6203 GOBIHANDLE handle,
6204 ULONG to,
6205 ULONG inLen,
6206 const BYTE * pIn,
6207 ULONG * pOutLen,
6208 BYTE * pOut );
6209
6210 /*===========================================================================
6211 METHOD:
6212 WMSIndicatorRegistration
6213
6214 DESCRIPTION:
6215 The function sends 'WMS/Indicator Registration Request' (0x0047)
6216 and returns the response
6217
6218 PARAMETERS:
6219 handle [ I ] - Gobi interface handle
6220 to [ I ] - Timeout for transaction (in milliseconds)
6221 inLen [ I ] - Length of input buffer
6222 pIn [ I ] - Input buffer
6223 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6224 contain, upon output the number of BYTEs copied
6225 to pOut
6226 pOut [ O ] - Output buffer
6227
6228 RETURN VALUE:
6229 ULONG - Return code
6230 ===========================================================================*/
6231 ULONG WMSIndicatorRegistration(
6232 GOBIHANDLE handle,
6233 ULONG to,
6234 ULONG inLen,
6235 const BYTE * pIn,
6236 ULONG * pOutLen,
6237 BYTE * pOut );
6238
6239 /*===========================================================================
6240 METHOD:
6241 WMSGetTransportLayerInfo
6242
6243 DESCRIPTION:
6244 The function sends 'WMS/Get Transport Layer Info Request' (0x0048)
6245 and returns the response
6246
6247 PARAMETERS:
6248 handle [ I ] - Gobi interface handle
6249 to [ I ] - Timeout for transaction (in milliseconds)
6250 inLen [ I ] - Reserved for future use (set to 0)
6251 pIn [ I ] - Reserved for future use (set to 0)
6252 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6253 contain, upon output the number of BYTEs copied
6254 to pOut
6255 pOut [ O ] - Output buffer
6256
6257 RETURN VALUE:
6258 ULONG - Return code
6259 ===========================================================================*/
6260 ULONG WMSGetTransportLayerInfo(
6261 GOBIHANDLE handle,
6262 ULONG to,
6263 ULONG inLen,
6264 const BYTE * pIn,
6265 ULONG * pOutLen,
6266 BYTE * pOut );
6267
6268 /*===========================================================================
6269 METHOD:
6270 WMSGetNetworkRegistrationInfo
6271
6272 DESCRIPTION:
6273 The function sends 'WMS/Get Network Registration Info Request' (0x004A)
6274 and returns the response
6275
6276 PARAMETERS:
6277 handle [ I ] - Gobi interface handle
6278 to [ I ] - Timeout for transaction (in milliseconds)
6279 inLen [ I ] - Reserved for future use (set to 0)
6280 pIn [ I ] - Reserved for future use (set to 0)
6281 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6282 contain, upon output the number of BYTEs copied
6283 to pOut
6284 pOut [ O ] - Output buffer
6285
6286 RETURN VALUE:
6287 ULONG - Return code
6288 ===========================================================================*/
6289 ULONG WMSGetNetworkRegistrationInfo(
6290 GOBIHANDLE handle,
6291 ULONG to,
6292 ULONG inLen,
6293 const BYTE * pIn,
6294 ULONG * pOutLen,
6295 BYTE * pOut );
6296
6297 /*===========================================================================
6298 METHOD:
6299 WMSBindSubscription
6300
6301 DESCRIPTION:
6302 The function sends 'WMS/Bind Subscription Request' (0x004C)
6303 and returns the response
6304
6305 PARAMETERS:
6306 handle [ I ] - Gobi interface handle
6307 to [ I ] - Timeout for transaction (in milliseconds)
6308 inLen [ I ] - Length of input buffer
6309 pIn [ I ] - Input buffer
6310 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6311 contain, upon output the number of BYTEs copied
6312 to pOut
6313 pOut [ O ] - Output buffer
6314
6315 RETURN VALUE:
6316 ULONG - Return code
6317 ===========================================================================*/
6318 ULONG WMSBindSubscription(
6319 GOBIHANDLE handle,
6320 ULONG to,
6321 ULONG inLen,
6322 const BYTE * pIn,
6323 ULONG * pOutLen,
6324 BYTE * pOut );
6325
6326 /*===========================================================================
6327 METHOD:
6328 WMSGetIndicatorRegistration
6329
6330 DESCRIPTION:
6331 The function sends 'WMS/Get Indicator Registration Request' (0x004D)
6332 and returns the response
6333
6334 PARAMETERS:
6335 handle [ I ] - Gobi interface handle
6336 to [ I ] - Timeout for transaction (in milliseconds)
6337 inLen [ I ] - Reserved for future use (set to 0)
6338 pIn [ I ] - Reserved for future use (set to 0)
6339 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6340 contain, upon output the number of BYTEs copied
6341 to pOut
6342 pOut [ O ] - Output buffer
6343
6344 RETURN VALUE:
6345 ULONG - Return code
6346 ===========================================================================*/
6347 ULONG WMSGetIndicatorRegistration(
6348 GOBIHANDLE handle,
6349 ULONG to,
6350 ULONG inLen,
6351 const BYTE * pIn,
6352 ULONG * pOutLen,
6353 BYTE * pOut );
6354
6355 /*===========================================================================
6356 METHOD:
6357 WMSGetSMSParameters
6358
6359 DESCRIPTION:
6360 The function sends 'WMS/Get SMS Parameters Request' (0x004E)
6361 and returns the response
6362
6363 PARAMETERS:
6364 handle [ I ] - Gobi interface handle
6365 to [ I ] - Timeout for transaction (in milliseconds)
6366 inLen [ I ] - Length of input buffer
6367 pIn [ I ] - Input buffer
6368 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6369 contain, upon output the number of BYTEs copied
6370 to pOut
6371 pOut [ O ] - Output buffer
6372
6373 RETURN VALUE:
6374 ULONG - Return code
6375 ===========================================================================*/
6376 ULONG WMSGetSMSParameters(
6377 GOBIHANDLE handle,
6378 ULONG to,
6379 ULONG inLen,
6380 const BYTE * pIn,
6381 ULONG * pOutLen,
6382 BYTE * pOut );
6383
6384 /*===========================================================================
6385 METHOD:
6386 WMSSetSMSParameters
6387
6388 DESCRIPTION:
6389 The function sends 'WMS/Set SMS Parameters Request' (0x004F)
6390 and returns the response
6391
6392 PARAMETERS:
6393 handle [ I ] - Gobi interface handle
6394 to [ I ] - Timeout for transaction (in milliseconds)
6395 inLen [ I ] - Length of input buffer
6396 pIn [ I ] - Input buffer
6397 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6398 contain, upon output the number of BYTEs copied
6399 to pOut
6400 pOut [ O ] - Output buffer
6401
6402 RETURN VALUE:
6403 ULONG - Return code
6404 ===========================================================================*/
6405 ULONG WMSSetSMSParameters(
6406 GOBIHANDLE handle,
6407 ULONG to,
6408 ULONG inLen,
6409 const BYTE * pIn,
6410 ULONG * pOutLen,
6411 BYTE * pOut );
6412
6413 /*===========================================================================
6414 METHOD:
6415 WMSGetDomainPreferenceConfig
6416
6417 DESCRIPTION:
6418 The function sends 'WMS/Get Domain Preference Config Request' (0x0051)
6419 and returns the response
6420
6421 PARAMETERS:
6422 handle [ I ] - Gobi interface handle
6423 to [ I ] - Timeout for transaction (in milliseconds)
6424 inLen [ I ] - Reserved for future use (set to 0)
6425 pIn [ I ] - Reserved for future use (set to 0)
6426 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6427 contain, upon output the number of BYTEs copied
6428 to pOut
6429 pOut [ O ] - Output buffer
6430
6431 RETURN VALUE:
6432 ULONG - Return code
6433 ===========================================================================*/
6434 ULONG WMSGetDomainPreferenceConfig(
6435 GOBIHANDLE handle,
6436 ULONG to,
6437 ULONG inLen,
6438 const BYTE * pIn,
6439 ULONG * pOutLen,
6440 BYTE * pOut );
6441
6442 /*===========================================================================
6443 METHOD:
6444 WMSSetDomainPreferenceConfig
6445
6446 DESCRIPTION:
6447 The function sends 'WMS/Set Domain Preference Config Request' (0x0052)
6448 and returns the response
6449
6450 PARAMETERS:
6451 handle [ I ] - Gobi interface handle
6452 to [ I ] - Timeout for transaction (in milliseconds)
6453 inLen [ I ] - Length of input buffer
6454 pIn [ I ] - Input buffer
6455 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6456 contain, upon output the number of BYTEs copied
6457 to pOut
6458 pOut [ O ] - Output buffer
6459
6460 RETURN VALUE:
6461 ULONG - Return code
6462 ===========================================================================*/
6463 ULONG WMSSetDomainPreferenceConfig(
6464 GOBIHANDLE handle,
6465 ULONG to,
6466 ULONG inLen,
6467 const BYTE * pIn,
6468 ULONG * pOutLen,
6469 BYTE * pOut );
6470
6471 /*===========================================================================
6472 METHOD:
6473 WMSGetRetryPeriod
6474
6475 DESCRIPTION:
6476 The function sends 'WMS/Get Retry Period Request' (0x0053)
6477 and returns the response
6478
6479 PARAMETERS:
6480 handle [ I ] - Gobi interface handle
6481 to [ I ] - Timeout for transaction (in milliseconds)
6482 inLen [ I ] - Reserved for future use (set to 0)
6483 pIn [ I ] - Reserved for future use (set to 0)
6484 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6485 contain, upon output the number of BYTEs copied
6486 to pOut
6487 pOut [ O ] - Output buffer
6488
6489 RETURN VALUE:
6490 ULONG - Return code
6491 ===========================================================================*/
6492 ULONG WMSGetRetryPeriod(
6493 GOBIHANDLE handle,
6494 ULONG to,
6495 ULONG inLen,
6496 const BYTE * pIn,
6497 ULONG * pOutLen,
6498 BYTE * pOut );
6499
6500 /*===========================================================================
6501 METHOD:
6502 WMSGetRetryInterval
6503
6504 DESCRIPTION:
6505 The function sends 'WMS/Get Retry Interval Request' (0x0054)
6506 and returns the response
6507
6508 PARAMETERS:
6509 handle [ I ] - Gobi interface handle
6510 to [ I ] - Timeout for transaction (in milliseconds)
6511 inLen [ I ] - Reserved for future use (set to 0)
6512 pIn [ I ] - Reserved for future use (set to 0)
6513 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6514 contain, upon output the number of BYTEs copied
6515 to pOut
6516 pOut [ O ] - Output buffer
6517
6518 RETURN VALUE:
6519 ULONG - Return code
6520 ===========================================================================*/
6521 ULONG WMSGetRetryInterval(
6522 GOBIHANDLE handle,
6523 ULONG to,
6524 ULONG inLen,
6525 const BYTE * pIn,
6526 ULONG * pOutLen,
6527 BYTE * pOut );
6528
6529 /*===========================================================================
6530 METHOD:
6531 WMSGetDCDisconnectTimer
6532
6533 DESCRIPTION:
6534 The function sends 'WMS/Get DC Disconnect Timer Request' (0x0055)
6535 and returns the response
6536
6537 PARAMETERS:
6538 handle [ I ] - Gobi interface handle
6539 to [ I ] - Timeout for transaction (in milliseconds)
6540 inLen [ I ] - Reserved for future use (set to 0)
6541 pIn [ I ] - Reserved for future use (set to 0)
6542 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6543 contain, upon output the number of BYTEs copied
6544 to pOut
6545 pOut [ O ] - Output buffer
6546
6547 RETURN VALUE:
6548 ULONG - Return code
6549 ===========================================================================*/
6550 ULONG WMSGetDCDisconnectTimer(
6551 GOBIHANDLE handle,
6552 ULONG to,
6553 ULONG inLen,
6554 const BYTE * pIn,
6555 ULONG * pOutLen,
6556 BYTE * pOut );
6557
6558 /*===========================================================================
6559 METHOD:
6560 WMSGetMemoryStatus
6561
6562 DESCRIPTION:
6563 The function sends 'WMS/Get Memory Status Request' (0x0056)
6564 and returns the response
6565
6566 PARAMETERS:
6567 handle [ I ] - Gobi interface handle
6568 to [ I ] - Timeout for transaction (in milliseconds)
6569 inLen [ I ] - Reserved for future use (set to 0)
6570 pIn [ I ] - Reserved for future use (set to 0)
6571 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6572 contain, upon output the number of BYTEs copied
6573 to pOut
6574 pOut [ O ] - Output buffer
6575
6576 RETURN VALUE:
6577 ULONG - Return code
6578 ===========================================================================*/
6579 ULONG WMSGetMemoryStatus(
6580 GOBIHANDLE handle,
6581 ULONG to,
6582 ULONG inLen,
6583 const BYTE * pIn,
6584 ULONG * pOutLen,
6585 BYTE * pOut );
6586
6587 /*===========================================================================
6588 METHOD:
6589 WMSGetPrimaryClient
6590
6591 DESCRIPTION:
6592 The function sends 'WMS/Get Primary Client Request' (0x0057)
6593 and returns the response
6594
6595 PARAMETERS:
6596 handle [ I ] - Gobi interface handle
6597 to [ I ] - Timeout for transaction (in milliseconds)
6598 inLen [ I ] - Reserved for future use (set to 0)
6599 pIn [ I ] - Reserved for future use (set to 0)
6600 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6601 contain, upon output the number of BYTEs copied
6602 to pOut
6603 pOut [ O ] - Output buffer
6604
6605 RETURN VALUE:
6606 ULONG - Return code
6607 ===========================================================================*/
6608 ULONG WMSGetPrimaryClient(
6609 GOBIHANDLE handle,
6610 ULONG to,
6611 ULONG inLen,
6612 const BYTE * pIn,
6613 ULONG * pOutLen,
6614 BYTE * pOut );
6615
6616 /*===========================================================================
6617 METHOD:
6618 WMSGetSubscriptionBinding
6619
6620 DESCRIPTION:
6621 The function sends 'WMS/Get Subscription Binding Request' (0x0058)
6622 and returns the response
6623
6624 PARAMETERS:
6625 handle [ I ] - Gobi interface handle
6626 to [ I ] - Timeout for transaction (in milliseconds)
6627 inLen [ I ] - Reserved for future use (set to 0)
6628 pIn [ I ] - Reserved for future use (set to 0)
6629 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6630 contain, upon output the number of BYTEs copied
6631 to pOut
6632 pOut [ O ] - Output buffer
6633
6634 RETURN VALUE:
6635 ULONG - Return code
6636 ===========================================================================*/
6637 ULONG WMSGetSubscriptionBinding(
6638 GOBIHANDLE handle,
6639 ULONG to,
6640 ULONG inLen,
6641 const BYTE * pIn,
6642 ULONG * pOutLen,
6643 BYTE * pOut );
6644
6645 /*===========================================================================
6646 METHOD:
6647 WMSAsyncRawSend
6648
6649 DESCRIPTION:
6650 The function sends 'WMS/Async Raw Send Request' (0x0059)
6651 and returns the response
6652
6653 PARAMETERS:
6654 handle [ I ] - Gobi interface handle
6655 to [ I ] - Timeout for transaction (in milliseconds)
6656 inLen [ I ] - Length of input buffer
6657 pIn [ I ] - Input buffer
6658 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6659 contain, upon output the number of BYTEs copied
6660 to pOut
6661 pOut [ O ] - Output buffer
6662
6663 RETURN VALUE:
6664 ULONG - Return code
6665 ===========================================================================*/
6666 ULONG WMSAsyncRawSend(
6667 GOBIHANDLE handle,
6668 ULONG to,
6669 ULONG inLen,
6670 const BYTE * pIn,
6671 ULONG * pOutLen,
6672 BYTE * pOut );
6673
6674 /*===========================================================================
6675 METHOD:
6676 WMSAsyncSendACK
6677
6678 DESCRIPTION:
6679 The function sends 'WMS/Async Send ACK Request' (0x005A)
6680 and returns the response
6681
6682 PARAMETERS:
6683 handle [ I ] - Gobi interface handle
6684 to [ I ] - Timeout for transaction (in milliseconds)
6685 inLen [ I ] - Length of input buffer
6686 pIn [ I ] - Input buffer
6687 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6688 contain, upon output the number of BYTEs copied
6689 to pOut
6690 pOut [ O ] - Output buffer
6691
6692 RETURN VALUE:
6693 ULONG - Return code
6694 ===========================================================================*/
6695 ULONG WMSAsyncSendACK(
6696 GOBIHANDLE handle,
6697 ULONG to,
6698 ULONG inLen,
6699 const BYTE * pIn,
6700 ULONG * pOutLen,
6701 BYTE * pOut );
6702
6703 /*===========================================================================
6704 METHOD:
6705 WMSAsyncSendFromMemoryStore
6706
6707 DESCRIPTION:
6708 The function sends 'WMS/Async Send From Memory Store Request' (0x005B)
6709 and returns the response
6710
6711 PARAMETERS:
6712 handle [ I ] - Gobi interface handle
6713 to [ I ] - Timeout for transaction (in milliseconds)
6714 inLen [ I ] - Length of input buffer
6715 pIn [ I ] - Input buffer
6716 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6717 contain, upon output the number of BYTEs copied
6718 to pOut
6719 pOut [ O ] - Output buffer
6720
6721 RETURN VALUE:
6722 ULONG - Return code
6723 ===========================================================================*/
6724 ULONG WMSAsyncSendFromMemoryStore(
6725 GOBIHANDLE handle,
6726 ULONG to,
6727 ULONG inLen,
6728 const BYTE * pIn,
6729 ULONG * pOutLen,
6730 BYTE * pOut );
6731
6732 /*===========================================================================
6733 METHOD:
6734 WMSGetServiceReadyStatus
6735
6736 DESCRIPTION:
6737 The function sends 'WMS/Get Service Ready Status Request' (0x005C)
6738 and returns the response
6739
6740 PARAMETERS:
6741 handle [ I ] - Gobi interface handle
6742 to [ I ] - Timeout for transaction (in milliseconds)
6743 inLen [ I ] - Reserved for future use (set to 0)
6744 pIn [ I ] - Reserved for future use (set to 0)
6745 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6746 contain, upon output the number of BYTEs copied
6747 to pOut
6748 pOut [ O ] - Output buffer
6749
6750 RETURN VALUE:
6751 ULONG - Return code
6752 ===========================================================================*/
6753 ULONG WMSGetServiceReadyStatus(
6754 GOBIHANDLE handle,
6755 ULONG to,
6756 ULONG inLen,
6757 const BYTE * pIn,
6758 ULONG * pOutLen,
6759 BYTE * pOut );
6760
6761 /*===========================================================================
6762 METHOD:
6763 PDSReset
6764
6765 DESCRIPTION:
6766 The function sends 'PDS/Reset Request' (0x0000)
6767 and returns the response
6768
6769 PARAMETERS:
6770 handle [ I ] - Gobi interface handle
6771 to [ I ] - Timeout for transaction (in milliseconds)
6772 inLen [ I ] - Reserved for future use (set to 0)
6773 pIn [ I ] - Reserved for future use (set to 0)
6774 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6775 contain, upon output the number of BYTEs copied
6776 to pOut
6777 pOut [ O ] - Output buffer
6778
6779 RETURN VALUE:
6780 ULONG - Return code
6781 ===========================================================================*/
6782 ULONG PDSReset(
6783 GOBIHANDLE handle,
6784 ULONG to,
6785 ULONG inLen,
6786 const BYTE * pIn,
6787 ULONG * pOutLen,
6788 BYTE * pOut );
6789
6790 /*===========================================================================
6791 METHOD:
6792 PDSSetEventReport
6793
6794 DESCRIPTION:
6795 The function sends 'PDS/Set Event Report Request' (0x0001)
6796 and returns the response
6797
6798 PARAMETERS:
6799 handle [ I ] - Gobi interface handle
6800 to [ I ] - Timeout for transaction (in milliseconds)
6801 inLen [ I ] - Length of input buffer
6802 pIn [ I ] - Input buffer
6803 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6804 contain, upon output the number of BYTEs copied
6805 to pOut
6806 pOut [ O ] - Output buffer
6807
6808 RETURN VALUE:
6809 ULONG - Return code
6810 ===========================================================================*/
6811 ULONG PDSSetEventReport(
6812 GOBIHANDLE handle,
6813 ULONG to,
6814 ULONG inLen,
6815 const BYTE * pIn,
6816 ULONG * pOutLen,
6817 BYTE * pOut );
6818
6819 /*===========================================================================
6820 METHOD:
6821 PDSGetServiceState
6822
6823 DESCRIPTION:
6824 The function sends 'PDS/Get Service State Request' (0x0020)
6825 and returns the response
6826
6827 PARAMETERS:
6828 handle [ I ] - Gobi interface handle
6829 to [ I ] - Timeout for transaction (in milliseconds)
6830 inLen [ I ] - Reserved for future use (set to 0)
6831 pIn [ I ] - Reserved for future use (set to 0)
6832 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6833 contain, upon output the number of BYTEs copied
6834 to pOut
6835 pOut [ O ] - Output buffer
6836
6837 RETURN VALUE:
6838 ULONG - Return code
6839 ===========================================================================*/
6840 ULONG PDSGetServiceState(
6841 GOBIHANDLE handle,
6842 ULONG to,
6843 ULONG inLen,
6844 const BYTE * pIn,
6845 ULONG * pOutLen,
6846 BYTE * pOut );
6847
6848 /*===========================================================================
6849 METHOD:
6850 PDSSetServiceState
6851
6852 DESCRIPTION:
6853 The function sends 'PDS/Set Service State Request' (0x0021)
6854 and returns the response
6855
6856 PARAMETERS:
6857 handle [ I ] - Gobi interface handle
6858 to [ I ] - Timeout for transaction (in milliseconds)
6859 inLen [ I ] - Length of input buffer
6860 pIn [ I ] - Input buffer
6861 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6862 contain, upon output the number of BYTEs copied
6863 to pOut
6864 pOut [ O ] - Output buffer
6865
6866 RETURN VALUE:
6867 ULONG - Return code
6868 ===========================================================================*/
6869 ULONG PDSSetServiceState(
6870 GOBIHANDLE handle,
6871 ULONG to,
6872 ULONG inLen,
6873 const BYTE * pIn,
6874 ULONG * pOutLen,
6875 BYTE * pOut );
6876
6877 /*===========================================================================
6878 METHOD:
6879 PDSStartTrackingSession
6880
6881 DESCRIPTION:
6882 The function sends 'PDS/Start Tracking Session Request' (0x0022)
6883 and returns the response
6884
6885 PARAMETERS:
6886 handle [ I ] - Gobi interface handle
6887 to [ I ] - Timeout for transaction (in milliseconds)
6888 inLen [ I ] - Length of input buffer
6889 pIn [ I ] - Input buffer
6890 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6891 contain, upon output the number of BYTEs copied
6892 to pOut
6893 pOut [ O ] - Output buffer
6894
6895 RETURN VALUE:
6896 ULONG - Return code
6897 ===========================================================================*/
6898 ULONG PDSStartTrackingSession(
6899 GOBIHANDLE handle,
6900 ULONG to,
6901 ULONG inLen,
6902 const BYTE * pIn,
6903 ULONG * pOutLen,
6904 BYTE * pOut );
6905
6906 /*===========================================================================
6907 METHOD:
6908 PDSGetTrackingSessionInfo
6909
6910 DESCRIPTION:
6911 The function sends 'PDS/Get Tracking Session Info Request' (0x0023)
6912 and returns the response
6913
6914 PARAMETERS:
6915 handle [ I ] - Gobi interface handle
6916 to [ I ] - Timeout for transaction (in milliseconds)
6917 inLen [ I ] - Reserved for future use (set to 0)
6918 pIn [ I ] - Reserved for future use (set to 0)
6919 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6920 contain, upon output the number of BYTEs copied
6921 to pOut
6922 pOut [ O ] - Output buffer
6923
6924 RETURN VALUE:
6925 ULONG - Return code
6926 ===========================================================================*/
6927 ULONG PDSGetTrackingSessionInfo(
6928 GOBIHANDLE handle,
6929 ULONG to,
6930 ULONG inLen,
6931 const BYTE * pIn,
6932 ULONG * pOutLen,
6933 BYTE * pOut );
6934
6935 /*===========================================================================
6936 METHOD:
6937 PDSFixPosition
6938
6939 DESCRIPTION:
6940 The function sends 'PDS/Fix Position Request' (0x0024)
6941 and returns the response
6942
6943 PARAMETERS:
6944 handle [ I ] - Gobi interface handle
6945 to [ I ] - Timeout for transaction (in milliseconds)
6946 inLen [ I ] - Reserved for future use (set to 0)
6947 pIn [ I ] - Reserved for future use (set to 0)
6948 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6949 contain, upon output the number of BYTEs copied
6950 to pOut
6951 pOut [ O ] - Output buffer
6952
6953 RETURN VALUE:
6954 ULONG - Return code
6955 ===========================================================================*/
6956 ULONG PDSFixPosition(
6957 GOBIHANDLE handle,
6958 ULONG to,
6959 ULONG inLen,
6960 const BYTE * pIn,
6961 ULONG * pOutLen,
6962 BYTE * pOut );
6963
6964 /*===========================================================================
6965 METHOD:
6966 PDSEndTrackingSession
6967
6968 DESCRIPTION:
6969 The function sends 'PDS/End Tracking Session Request' (0x0025)
6970 and returns the response
6971
6972 PARAMETERS:
6973 handle [ I ] - Gobi interface handle
6974 to [ I ] - Timeout for transaction (in milliseconds)
6975 inLen [ I ] - Reserved for future use (set to 0)
6976 pIn [ I ] - Reserved for future use (set to 0)
6977 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
6978 contain, upon output the number of BYTEs copied
6979 to pOut
6980 pOut [ O ] - Output buffer
6981
6982 RETURN VALUE:
6983 ULONG - Return code
6984 ===========================================================================*/
6985 ULONG PDSEndTrackingSession(
6986 GOBIHANDLE handle,
6987 ULONG to,
6988 ULONG inLen,
6989 const BYTE * pIn,
6990 ULONG * pOutLen,
6991 BYTE * pOut );
6992
6993 /*===========================================================================
6994 METHOD:
6995 PDSGetNMEAConfig
6996
6997 DESCRIPTION:
6998 The function sends 'PDS/Get NMEA Config Request' (0x0026)
6999 and returns the response
7000
7001 PARAMETERS:
7002 handle [ I ] - Gobi interface handle
7003 to [ I ] - Timeout for transaction (in milliseconds)
7004 inLen [ I ] - Reserved for future use (set to 0)
7005 pIn [ I ] - Reserved for future use (set to 0)
7006 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7007 contain, upon output the number of BYTEs copied
7008 to pOut
7009 pOut [ O ] - Output buffer
7010
7011 RETURN VALUE:
7012 ULONG - Return code
7013 ===========================================================================*/
7014 ULONG PDSGetNMEAConfig(
7015 GOBIHANDLE handle,
7016 ULONG to,
7017 ULONG inLen,
7018 const BYTE * pIn,
7019 ULONG * pOutLen,
7020 BYTE * pOut );
7021
7022 /*===========================================================================
7023 METHOD:
7024 PDSSetNMEAConfig
7025
7026 DESCRIPTION:
7027 The function sends 'PDS/Set NMEA Config Request' (0x0027)
7028 and returns the response
7029
7030 PARAMETERS:
7031 handle [ I ] - Gobi interface handle
7032 to [ I ] - Timeout for transaction (in milliseconds)
7033 inLen [ I ] - Length of input buffer
7034 pIn [ I ] - Input buffer
7035 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7036 contain, upon output the number of BYTEs copied
7037 to pOut
7038 pOut [ O ] - Output buffer
7039
7040 RETURN VALUE:
7041 ULONG - Return code
7042 ===========================================================================*/
7043 ULONG PDSSetNMEAConfig(
7044 GOBIHANDLE handle,
7045 ULONG to,
7046 ULONG inLen,
7047 const BYTE * pIn,
7048 ULONG * pOutLen,
7049 BYTE * pOut );
7050
7051 /*===========================================================================
7052 METHOD:
7053 PDSInjectTimeReference
7054
7055 DESCRIPTION:
7056 The function sends 'PDS/Inject Time Reference Request' (0x0028)
7057 and returns the response
7058
7059 PARAMETERS:
7060 handle [ I ] - Gobi interface handle
7061 to [ I ] - Timeout for transaction (in milliseconds)
7062 inLen [ I ] - Length of input buffer
7063 pIn [ I ] - Input buffer
7064 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7065 contain, upon output the number of BYTEs copied
7066 to pOut
7067 pOut [ O ] - Output buffer
7068
7069 RETURN VALUE:
7070 ULONG - Return code
7071 ===========================================================================*/
7072 ULONG PDSInjectTimeReference(
7073 GOBIHANDLE handle,
7074 ULONG to,
7075 ULONG inLen,
7076 const BYTE * pIn,
7077 ULONG * pOutLen,
7078 BYTE * pOut );
7079
7080 /*===========================================================================
7081 METHOD:
7082 PDSGetDefaults
7083
7084 DESCRIPTION:
7085 The function sends 'PDS/Get Defaults Request' (0x0029)
7086 and returns the response
7087
7088 PARAMETERS:
7089 handle [ I ] - Gobi interface handle
7090 to [ I ] - Timeout for transaction (in milliseconds)
7091 inLen [ I ] - Reserved for future use (set to 0)
7092 pIn [ I ] - Reserved for future use (set to 0)
7093 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7094 contain, upon output the number of BYTEs copied
7095 to pOut
7096 pOut [ O ] - Output buffer
7097
7098 RETURN VALUE:
7099 ULONG - Return code
7100 ===========================================================================*/
7101 ULONG PDSGetDefaults(
7102 GOBIHANDLE handle,
7103 ULONG to,
7104 ULONG inLen,
7105 const BYTE * pIn,
7106 ULONG * pOutLen,
7107 BYTE * pOut );
7108
7109 /*===========================================================================
7110 METHOD:
7111 PDSSetDefaults
7112
7113 DESCRIPTION:
7114 The function sends 'PDS/Set Defaults Request' (0x002A)
7115 and returns the response
7116
7117 PARAMETERS:
7118 handle [ I ] - Gobi interface handle
7119 to [ I ] - Timeout for transaction (in milliseconds)
7120 inLen [ I ] - Length of input buffer
7121 pIn [ I ] - Input buffer
7122 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7123 contain, upon output the number of BYTEs copied
7124 to pOut
7125 pOut [ O ] - Output buffer
7126
7127 RETURN VALUE:
7128 ULONG - Return code
7129 ===========================================================================*/
7130 ULONG PDSSetDefaults(
7131 GOBIHANDLE handle,
7132 ULONG to,
7133 ULONG inLen,
7134 const BYTE * pIn,
7135 ULONG * pOutLen,
7136 BYTE * pOut );
7137
7138 /*===========================================================================
7139 METHOD:
7140 PDSGetXTRAParameters
7141
7142 DESCRIPTION:
7143 The function sends 'PDS/Get XTRA Parameters Request' (0x002B)
7144 and returns the response
7145
7146 PARAMETERS:
7147 handle [ I ] - Gobi interface handle
7148 to [ I ] - Timeout for transaction (in milliseconds)
7149 inLen [ I ] - Reserved for future use (set to 0)
7150 pIn [ I ] - Reserved for future use (set to 0)
7151 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7152 contain, upon output the number of BYTEs copied
7153 to pOut
7154 pOut [ O ] - Output buffer
7155
7156 RETURN VALUE:
7157 ULONG - Return code
7158 ===========================================================================*/
7159 ULONG PDSGetXTRAParameters(
7160 GOBIHANDLE handle,
7161 ULONG to,
7162 ULONG inLen,
7163 const BYTE * pIn,
7164 ULONG * pOutLen,
7165 BYTE * pOut );
7166
7167 /*===========================================================================
7168 METHOD:
7169 PDSSetXTRAParameters
7170
7171 DESCRIPTION:
7172 The function sends 'PDS/Set XTRA Parameters Request' (0x002C)
7173 and returns the response
7174
7175 PARAMETERS:
7176 handle [ I ] - Gobi interface handle
7177 to [ I ] - Timeout for transaction (in milliseconds)
7178 inLen [ I ] - Length of input buffer
7179 pIn [ I ] - Input buffer
7180 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7181 contain, upon output the number of BYTEs copied
7182 to pOut
7183 pOut [ O ] - Output buffer
7184
7185 RETURN VALUE:
7186 ULONG - Return code
7187 ===========================================================================*/
7188 ULONG PDSSetXTRAParameters(
7189 GOBIHANDLE handle,
7190 ULONG to,
7191 ULONG inLen,
7192 const BYTE * pIn,
7193 ULONG * pOutLen,
7194 BYTE * pOut );
7195
7196 /*===========================================================================
7197 METHOD:
7198 PDSForceXTRADownload
7199
7200 DESCRIPTION:
7201 The function sends 'PDS/Force XTRA Download Request' (0x002D)
7202 and returns the response
7203
7204 PARAMETERS:
7205 handle [ I ] - Gobi interface handle
7206 to [ I ] - Timeout for transaction (in milliseconds)
7207 inLen [ I ] - Reserved for future use (set to 0)
7208 pIn [ I ] - Reserved for future use (set to 0)
7209 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7210 contain, upon output the number of BYTEs copied
7211 to pOut
7212 pOut [ O ] - Output buffer
7213
7214 RETURN VALUE:
7215 ULONG - Return code
7216 ===========================================================================*/
7217 ULONG PDSForceXTRADownload(
7218 GOBIHANDLE handle,
7219 ULONG to,
7220 ULONG inLen,
7221 const BYTE * pIn,
7222 ULONG * pOutLen,
7223 BYTE * pOut );
7224
7225 /*===========================================================================
7226 METHOD:
7227 PDSGetAGPSConfig
7228
7229 DESCRIPTION:
7230 The function sends 'PDS/Get AGPS Config Request' (0x002E)
7231 and returns the response
7232
7233 PARAMETERS:
7234 handle [ I ] - Gobi interface handle
7235 to [ I ] - Timeout for transaction (in milliseconds)
7236 inLen [ I ] - Length of input buffer
7237 pIn [ I ] - Input buffer
7238 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7239 contain, upon output the number of BYTEs copied
7240 to pOut
7241 pOut [ O ] - Output buffer
7242
7243 RETURN VALUE:
7244 ULONG - Return code
7245 ===========================================================================*/
7246 ULONG PDSGetAGPSConfig(
7247 GOBIHANDLE handle,
7248 ULONG to,
7249 ULONG inLen,
7250 const BYTE * pIn,
7251 ULONG * pOutLen,
7252 BYTE * pOut );
7253
7254 /*===========================================================================
7255 METHOD:
7256 PDSSetAGPSConfig
7257
7258 DESCRIPTION:
7259 The function sends 'PDS/Set AGPS Config Request' (0x002F)
7260 and returns the response
7261
7262 PARAMETERS:
7263 handle [ I ] - Gobi interface handle
7264 to [ I ] - Timeout for transaction (in milliseconds)
7265 inLen [ I ] - Length of input buffer
7266 pIn [ I ] - Input buffer
7267 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7268 contain, upon output the number of BYTEs copied
7269 to pOut
7270 pOut [ O ] - Output buffer
7271
7272 RETURN VALUE:
7273 ULONG - Return code
7274 ===========================================================================*/
7275 ULONG PDSSetAGPSConfig(
7276 GOBIHANDLE handle,
7277 ULONG to,
7278 ULONG inLen,
7279 const BYTE * pIn,
7280 ULONG * pOutLen,
7281 BYTE * pOut );
7282
7283 /*===========================================================================
7284 METHOD:
7285 PDSGetServiceAutoTrackingState
7286
7287 DESCRIPTION:
7288 The function sends 'PDS/Get Service Auto-Tracking State Request' (0x0030)
7289 and returns the response
7290
7291 PARAMETERS:
7292 handle [ I ] - Gobi interface handle
7293 to [ I ] - Timeout for transaction (in milliseconds)
7294 inLen [ I ] - Reserved for future use (set to 0)
7295 pIn [ I ] - Reserved for future use (set to 0)
7296 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7297 contain, upon output the number of BYTEs copied
7298 to pOut
7299 pOut [ O ] - Output buffer
7300
7301 RETURN VALUE:
7302 ULONG - Return code
7303 ===========================================================================*/
7304 ULONG PDSGetServiceAutoTrackingState(
7305 GOBIHANDLE handle,
7306 ULONG to,
7307 ULONG inLen,
7308 const BYTE * pIn,
7309 ULONG * pOutLen,
7310 BYTE * pOut );
7311
7312 /*===========================================================================
7313 METHOD:
7314 PDSSetServiceAutoTrackingState
7315
7316 DESCRIPTION:
7317 The function sends 'PDS/Set Service Auto-Tracking State Request' (0x0031)
7318 and returns the response
7319
7320 PARAMETERS:
7321 handle [ I ] - Gobi interface handle
7322 to [ I ] - Timeout for transaction (in milliseconds)
7323 inLen [ I ] - Length of input buffer
7324 pIn [ I ] - Input buffer
7325 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7326 contain, upon output the number of BYTEs copied
7327 to pOut
7328 pOut [ O ] - Output buffer
7329
7330 RETURN VALUE:
7331 ULONG - Return code
7332 ===========================================================================*/
7333 ULONG PDSSetServiceAutoTrackingState(
7334 GOBIHANDLE handle,
7335 ULONG to,
7336 ULONG inLen,
7337 const BYTE * pIn,
7338 ULONG * pOutLen,
7339 BYTE * pOut );
7340
7341 /*===========================================================================
7342 METHOD:
7343 PDSGetCOMPortAutoTrackingConfig
7344
7345 DESCRIPTION:
7346 The function sends 'PDS/Get COM Port Auto-Tracking Config Request' (0x0032)
7347 and returns the response
7348
7349 PARAMETERS:
7350 handle [ I ] - Gobi interface handle
7351 to [ I ] - Timeout for transaction (in milliseconds)
7352 inLen [ I ] - Reserved for future use (set to 0)
7353 pIn [ I ] - Reserved for future use (set to 0)
7354 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7355 contain, upon output the number of BYTEs copied
7356 to pOut
7357 pOut [ O ] - Output buffer
7358
7359 RETURN VALUE:
7360 ULONG - Return code
7361 ===========================================================================*/
7362 ULONG PDSGetCOMPortAutoTrackingConfig(
7363 GOBIHANDLE handle,
7364 ULONG to,
7365 ULONG inLen,
7366 const BYTE * pIn,
7367 ULONG * pOutLen,
7368 BYTE * pOut );
7369
7370 /*===========================================================================
7371 METHOD:
7372 PDSSetCOMPortAutoTrackingConfig
7373
7374 DESCRIPTION:
7375 The function sends 'PDS/Set COM Port Auto-Tracking Config Request' (0x0033)
7376 and returns the response
7377
7378 PARAMETERS:
7379 handle [ I ] - Gobi interface handle
7380 to [ I ] - Timeout for transaction (in milliseconds)
7381 inLen [ I ] - Length of input buffer
7382 pIn [ I ] - Input buffer
7383 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7384 contain, upon output the number of BYTEs copied
7385 to pOut
7386 pOut [ O ] - Output buffer
7387
7388 RETURN VALUE:
7389 ULONG - Return code
7390 ===========================================================================*/
7391 ULONG PDSSetCOMPortAutoTrackingConfig(
7392 GOBIHANDLE handle,
7393 ULONG to,
7394 ULONG inLen,
7395 const BYTE * pIn,
7396 ULONG * pOutLen,
7397 BYTE * pOut );
7398
7399 /*===========================================================================
7400 METHOD:
7401 PDSResetPDSData
7402
7403 DESCRIPTION:
7404 The function sends 'PDS/Reset PDS Data Request' (0x0034)
7405 and returns the response
7406
7407 PARAMETERS:
7408 handle [ I ] - Gobi interface handle
7409 to [ I ] - Timeout for transaction (in milliseconds)
7410 inLen [ I ] - Length of input buffer
7411 pIn [ I ] - Input buffer
7412 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7413 contain, upon output the number of BYTEs copied
7414 to pOut
7415 pOut [ O ] - Output buffer
7416
7417 RETURN VALUE:
7418 ULONG - Return code
7419 ===========================================================================*/
7420 ULONG PDSResetPDSData(
7421 GOBIHANDLE handle,
7422 ULONG to,
7423 ULONG inLen,
7424 const BYTE * pIn,
7425 ULONG * pOutLen,
7426 BYTE * pOut );
7427
7428 /*===========================================================================
7429 METHOD:
7430 PDSSinglePositionFix
7431
7432 DESCRIPTION:
7433 The function sends 'PDS/Single Position Fix Request' (0x0035)
7434 and returns the response
7435
7436 PARAMETERS:
7437 handle [ I ] - Gobi interface handle
7438 to [ I ] - Timeout for transaction (in milliseconds)
7439 inLen [ I ] - Length of input buffer
7440 pIn [ I ] - Input buffer
7441 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7442 contain, upon output the number of BYTEs copied
7443 to pOut
7444 pOut [ O ] - Output buffer
7445
7446 RETURN VALUE:
7447 ULONG - Return code
7448 ===========================================================================*/
7449 ULONG PDSSinglePositionFix(
7450 GOBIHANDLE handle,
7451 ULONG to,
7452 ULONG inLen,
7453 const BYTE * pIn,
7454 ULONG * pOutLen,
7455 BYTE * pOut );
7456
7457 /*===========================================================================
7458 METHOD:
7459 PDSGetServiceVersion
7460
7461 DESCRIPTION:
7462 The function sends 'PDS/Get Service Version Request' (0x0036)
7463 and returns the response
7464
7465 PARAMETERS:
7466 handle [ I ] - Gobi interface handle
7467 to [ I ] - Timeout for transaction (in milliseconds)
7468 inLen [ I ] - Reserved for future use (set to 0)
7469 pIn [ I ] - Reserved for future use (set to 0)
7470 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7471 contain, upon output the number of BYTEs copied
7472 to pOut
7473 pOut [ O ] - Output buffer
7474
7475 RETURN VALUE:
7476 ULONG - Return code
7477 ===========================================================================*/
7478 ULONG PDSGetServiceVersion(
7479 GOBIHANDLE handle,
7480 ULONG to,
7481 ULONG inLen,
7482 const BYTE * pIn,
7483 ULONG * pOutLen,
7484 BYTE * pOut );
7485
7486 /*===========================================================================
7487 METHOD:
7488 PDSInjectXTRAData
7489
7490 DESCRIPTION:
7491 The function sends 'PDS/Inject XTRA Data Request' (0x0037)
7492 and returns the response
7493
7494 PARAMETERS:
7495 handle [ I ] - Gobi interface handle
7496 to [ I ] - Timeout for transaction (in milliseconds)
7497 inLen [ I ] - Length of input buffer
7498 pIn [ I ] - Input buffer
7499 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7500 contain, upon output the number of BYTEs copied
7501 to pOut
7502 pOut [ O ] - Output buffer
7503
7504 RETURN VALUE:
7505 ULONG - Return code
7506 ===========================================================================*/
7507 ULONG PDSInjectXTRAData(
7508 GOBIHANDLE handle,
7509 ULONG to,
7510 ULONG inLen,
7511 const BYTE * pIn,
7512 ULONG * pOutLen,
7513 BYTE * pOut );
7514
7515 /*===========================================================================
7516 METHOD:
7517 PDSInjectPositionData
7518
7519 DESCRIPTION:
7520 The function sends 'PDS/Inject Position Data Request' (0x0038)
7521 and returns the response
7522
7523 PARAMETERS:
7524 handle [ I ] - Gobi interface handle
7525 to [ I ] - Timeout for transaction (in milliseconds)
7526 inLen [ I ] - Length of input buffer
7527 pIn [ I ] - Input buffer
7528 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7529 contain, upon output the number of BYTEs copied
7530 to pOut
7531 pOut [ O ] - Output buffer
7532
7533 RETURN VALUE:
7534 ULONG - Return code
7535 ===========================================================================*/
7536 ULONG PDSInjectPositionData(
7537 GOBIHANDLE handle,
7538 ULONG to,
7539 ULONG inLen,
7540 const BYTE * pIn,
7541 ULONG * pOutLen,
7542 BYTE * pOut );
7543
7544 /*===========================================================================
7545 METHOD:
7546 PDSInjectWiFiPositionData
7547
7548 DESCRIPTION:
7549 The function sends 'PDS/Inject Wi-Fi Position Data Request' (0x0039)
7550 and returns the response
7551
7552 PARAMETERS:
7553 handle [ I ] - Gobi interface handle
7554 to [ I ] - Timeout for transaction (in milliseconds)
7555 inLen [ I ] - Length of input buffer
7556 pIn [ I ] - Input buffer
7557 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7558 contain, upon output the number of BYTEs copied
7559 to pOut
7560 pOut [ O ] - Output buffer
7561
7562 RETURN VALUE:
7563 ULONG - Return code
7564 ===========================================================================*/
7565 ULONG PDSInjectWiFiPositionData(
7566 GOBIHANDLE handle,
7567 ULONG to,
7568 ULONG inLen,
7569 const BYTE * pIn,
7570 ULONG * pOutLen,
7571 BYTE * pOut );
7572
7573 /*===========================================================================
7574 METHOD:
7575 PDSGetSBASConfig
7576
7577 DESCRIPTION:
7578 The function sends 'PDS/Get SBAS Config Request' (0x003A)
7579 and returns the response
7580
7581 PARAMETERS:
7582 handle [ I ] - Gobi interface handle
7583 to [ I ] - Timeout for transaction (in milliseconds)
7584 inLen [ I ] - Reserved for future use (set to 0)
7585 pIn [ I ] - Reserved for future use (set to 0)
7586 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7587 contain, upon output the number of BYTEs copied
7588 to pOut
7589 pOut [ O ] - Output buffer
7590
7591 RETURN VALUE:
7592 ULONG - Return code
7593 ===========================================================================*/
7594 ULONG PDSGetSBASConfig(
7595 GOBIHANDLE handle,
7596 ULONG to,
7597 ULONG inLen,
7598 const BYTE * pIn,
7599 ULONG * pOutLen,
7600 BYTE * pOut );
7601
7602 /*===========================================================================
7603 METHOD:
7604 PDSSetSBASConfig
7605
7606 DESCRIPTION:
7607 The function sends 'PDS/Set SBAS Config Request' (0x003B)
7608 and returns the response
7609
7610 PARAMETERS:
7611 handle [ I ] - Gobi interface handle
7612 to [ I ] - Timeout for transaction (in milliseconds)
7613 inLen [ I ] - Length of input buffer
7614 pIn [ I ] - Input buffer
7615 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7616 contain, upon output the number of BYTEs copied
7617 to pOut
7618 pOut [ O ] - Output buffer
7619
7620 RETURN VALUE:
7621 ULONG - Return code
7622 ===========================================================================*/
7623 ULONG PDSSetSBASConfig(
7624 GOBIHANDLE handle,
7625 ULONG to,
7626 ULONG inLen,
7627 const BYTE * pIn,
7628 ULONG * pOutLen,
7629 BYTE * pOut );
7630
7631 /*===========================================================================
7632 METHOD:
7633 PDSSendNetworkInitiatedResponse
7634
7635 DESCRIPTION:
7636 The function sends 'PDS/Send Network Initiated Response Request' (0x003C)
7637 and returns the response
7638
7639 PARAMETERS:
7640 handle [ I ] - Gobi interface handle
7641 to [ I ] - Timeout for transaction (in milliseconds)
7642 inLen [ I ] - Length of input buffer
7643 pIn [ I ] - Input buffer
7644 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7645 contain, upon output the number of BYTEs copied
7646 to pOut
7647 pOut [ O ] - Output buffer
7648
7649 RETURN VALUE:
7650 ULONG - Return code
7651 ===========================================================================*/
7652 ULONG PDSSendNetworkInitiatedResponse(
7653 GOBIHANDLE handle,
7654 ULONG to,
7655 ULONG inLen,
7656 const BYTE * pIn,
7657 ULONG * pOutLen,
7658 BYTE * pOut );
7659
7660 /*===========================================================================
7661 METHOD:
7662 PDSInjectAbsoluteTime
7663
7664 DESCRIPTION:
7665 The function sends 'PDS/Inject Absolute Time Request' (0x003D)
7666 and returns the response
7667
7668 PARAMETERS:
7669 handle [ I ] - Gobi interface handle
7670 to [ I ] - Timeout for transaction (in milliseconds)
7671 inLen [ I ] - Length of input buffer
7672 pIn [ I ] - Input buffer
7673 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7674 contain, upon output the number of BYTEs copied
7675 to pOut
7676 pOut [ O ] - Output buffer
7677
7678 RETURN VALUE:
7679 ULONG - Return code
7680 ===========================================================================*/
7681 ULONG PDSInjectAbsoluteTime(
7682 GOBIHANDLE handle,
7683 ULONG to,
7684 ULONG inLen,
7685 const BYTE * pIn,
7686 ULONG * pOutLen,
7687 BYTE * pOut );
7688
7689 /*===========================================================================
7690 METHOD:
7691 PDSInjectEFSData
7692
7693 DESCRIPTION:
7694 The function sends 'PDS/Inject EFS Data Request' (0x003E)
7695 and returns the response
7696
7697 PARAMETERS:
7698 handle [ I ] - Gobi interface handle
7699 to [ I ] - Timeout for transaction (in milliseconds)
7700 inLen [ I ] - Length of input buffer
7701 pIn [ I ] - Input buffer
7702 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7703 contain, upon output the number of BYTEs copied
7704 to pOut
7705 pOut [ O ] - Output buffer
7706
7707 RETURN VALUE:
7708 ULONG - Return code
7709 ===========================================================================*/
7710 ULONG PDSInjectEFSData(
7711 GOBIHANDLE handle,
7712 ULONG to,
7713 ULONG inLen,
7714 const BYTE * pIn,
7715 ULONG * pOutLen,
7716 BYTE * pOut );
7717
7718 /*===========================================================================
7719 METHOD:
7720 PDSGetDPOConfig
7721
7722 DESCRIPTION:
7723 The function sends 'PDS/Get DPO Config Request' (0x003F)
7724 and returns the response
7725
7726 PARAMETERS:
7727 handle [ I ] - Gobi interface handle
7728 to [ I ] - Timeout for transaction (in milliseconds)
7729 inLen [ I ] - Reserved for future use (set to 0)
7730 pIn [ I ] - Reserved for future use (set to 0)
7731 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7732 contain, upon output the number of BYTEs copied
7733 to pOut
7734 pOut [ O ] - Output buffer
7735
7736 RETURN VALUE:
7737 ULONG - Return code
7738 ===========================================================================*/
7739 ULONG PDSGetDPOConfig(
7740 GOBIHANDLE handle,
7741 ULONG to,
7742 ULONG inLen,
7743 const BYTE * pIn,
7744 ULONG * pOutLen,
7745 BYTE * pOut );
7746
7747 /*===========================================================================
7748 METHOD:
7749 PDSSetDPOConfig
7750
7751 DESCRIPTION:
7752 The function sends 'PDS/Set DPO Config Request' (0x0040)
7753 and returns the response
7754
7755 PARAMETERS:
7756 handle [ I ] - Gobi interface handle
7757 to [ I ] - Timeout for transaction (in milliseconds)
7758 inLen [ I ] - Length of input buffer
7759 pIn [ I ] - Input buffer
7760 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7761 contain, upon output the number of BYTEs copied
7762 to pOut
7763 pOut [ O ] - Output buffer
7764
7765 RETURN VALUE:
7766 ULONG - Return code
7767 ===========================================================================*/
7768 ULONG PDSSetDPOConfig(
7769 GOBIHANDLE handle,
7770 ULONG to,
7771 ULONG inLen,
7772 const BYTE * pIn,
7773 ULONG * pOutLen,
7774 BYTE * pOut );
7775
7776 /*===========================================================================
7777 METHOD:
7778 PDSGetODPConfig
7779
7780 DESCRIPTION:
7781 The function sends 'PDS/Get ODP Config Request' (0x0041)
7782 and returns the response
7783
7784 PARAMETERS:
7785 handle [ I ] - Gobi interface handle
7786 to [ I ] - Timeout for transaction (in milliseconds)
7787 inLen [ I ] - Reserved for future use (set to 0)
7788 pIn [ I ] - Reserved for future use (set to 0)
7789 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7790 contain, upon output the number of BYTEs copied
7791 to pOut
7792 pOut [ O ] - Output buffer
7793
7794 RETURN VALUE:
7795 ULONG - Return code
7796 ===========================================================================*/
7797 ULONG PDSGetODPConfig(
7798 GOBIHANDLE handle,
7799 ULONG to,
7800 ULONG inLen,
7801 const BYTE * pIn,
7802 ULONG * pOutLen,
7803 BYTE * pOut );
7804
7805 /*===========================================================================
7806 METHOD:
7807 PDSSetODPConfig
7808
7809 DESCRIPTION:
7810 The function sends 'PDS/Set ODP Config Request' (0x0042)
7811 and returns the response
7812
7813 PARAMETERS:
7814 handle [ I ] - Gobi interface handle
7815 to [ I ] - Timeout for transaction (in milliseconds)
7816 inLen [ I ] - Length of input buffer
7817 pIn [ I ] - Input buffer
7818 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7819 contain, upon output the number of BYTEs copied
7820 to pOut
7821 pOut [ O ] - Output buffer
7822
7823 RETURN VALUE:
7824 ULONG - Return code
7825 ===========================================================================*/
7826 ULONG PDSSetODPConfig(
7827 GOBIHANDLE handle,
7828 ULONG to,
7829 ULONG inLen,
7830 const BYTE * pIn,
7831 ULONG * pOutLen,
7832 BYTE * pOut );
7833
7834 /*===========================================================================
7835 METHOD:
7836 PDSCancelSinglePositionFix
7837
7838 DESCRIPTION:
7839 The function sends 'PDS/Cancel Single Position Fix Request' (0x0043)
7840 and returns the response
7841
7842 PARAMETERS:
7843 handle [ I ] - Gobi interface handle
7844 to [ I ] - Timeout for transaction (in milliseconds)
7845 inLen [ I ] - Reserved for future use (set to 0)
7846 pIn [ I ] - Reserved for future use (set to 0)
7847 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7848 contain, upon output the number of BYTEs copied
7849 to pOut
7850 pOut [ O ] - Output buffer
7851
7852 RETURN VALUE:
7853 ULONG - Return code
7854 ===========================================================================*/
7855 ULONG PDSCancelSinglePositionFix(
7856 GOBIHANDLE handle,
7857 ULONG to,
7858 ULONG inLen,
7859 const BYTE * pIn,
7860 ULONG * pOutLen,
7861 BYTE * pOut );
7862
7863 /*===========================================================================
7864 METHOD:
7865 PDSGetGPSState
7866
7867 DESCRIPTION:
7868 The function sends 'PDS/Get GPS State Request' (0x0044)
7869 and returns the response
7870
7871 PARAMETERS:
7872 handle [ I ] - Gobi interface handle
7873 to [ I ] - Timeout for transaction (in milliseconds)
7874 inLen [ I ] - Reserved for future use (set to 0)
7875 pIn [ I ] - Reserved for future use (set to 0)
7876 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7877 contain, upon output the number of BYTEs copied
7878 to pOut
7879 pOut [ O ] - Output buffer
7880
7881 RETURN VALUE:
7882 ULONG - Return code
7883 ===========================================================================*/
7884 ULONG PDSGetGPSState(
7885 GOBIHANDLE handle,
7886 ULONG to,
7887 ULONG inLen,
7888 const BYTE * pIn,
7889 ULONG * pOutLen,
7890 BYTE * pOut );
7891
7892 /*===========================================================================
7893 METHOD:
7894 PDSSetPPMEventReport
7895
7896 DESCRIPTION:
7897 The function sends 'PDS/Set PPM Event Report Request' (0x0045)
7898 and returns the response
7899
7900 PARAMETERS:
7901 handle [ I ] - Gobi interface handle
7902 to [ I ] - Timeout for transaction (in milliseconds)
7903 inLen [ I ] - Length of input buffer
7904 pIn [ I ] - Input buffer
7905 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7906 contain, upon output the number of BYTEs copied
7907 to pOut
7908 pOut [ O ] - Output buffer
7909
7910 RETURN VALUE:
7911 ULONG - Return code
7912 ===========================================================================*/
7913 ULONG PDSSetPPMEventReport(
7914 GOBIHANDLE handle,
7915 ULONG to,
7916 ULONG inLen,
7917 const BYTE * pIn,
7918 ULONG * pOutLen,
7919 BYTE * pOut );
7920
7921 /*===========================================================================
7922 METHOD:
7923 PDSSetSPIStreamingReport
7924
7925 DESCRIPTION:
7926 The function sends 'PDS/Set SPI Streaming Report Request' (0x0046)
7927 and returns the response
7928
7929 PARAMETERS:
7930 handle [ I ] - Gobi interface handle
7931 to [ I ] - Timeout for transaction (in milliseconds)
7932 inLen [ I ] - Length of input buffer
7933 pIn [ I ] - Input buffer
7934 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7935 contain, upon output the number of BYTEs copied
7936 to pOut
7937 pOut [ O ] - Output buffer
7938
7939 RETURN VALUE:
7940 ULONG - Return code
7941 ===========================================================================*/
7942 ULONG PDSSetSPIStreamingReport(
7943 GOBIHANDLE handle,
7944 ULONG to,
7945 ULONG inLen,
7946 const BYTE * pIn,
7947 ULONG * pOutLen,
7948 BYTE * pOut );
7949
7950 /*===========================================================================
7951 METHOD:
7952 PDSSetSPIStatus
7953
7954 DESCRIPTION:
7955 The function sends 'PDS/Set SPI Status Request' (0x0047)
7956 and returns the response
7957
7958 PARAMETERS:
7959 handle [ I ] - Gobi interface handle
7960 to [ I ] - Timeout for transaction (in milliseconds)
7961 inLen [ I ] - Length of input buffer
7962 pIn [ I ] - Input buffer
7963 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7964 contain, upon output the number of BYTEs copied
7965 to pOut
7966 pOut [ O ] - Output buffer
7967
7968 RETURN VALUE:
7969 ULONG - Return code
7970 ===========================================================================*/
7971 ULONG PDSSetSPIStatus(
7972 GOBIHANDLE handle,
7973 ULONG to,
7974 ULONG inLen,
7975 const BYTE * pIn,
7976 ULONG * pOutLen,
7977 BYTE * pOut );
7978
7979 /*===========================================================================
7980 METHOD:
7981 PDSSetPPMReportingState
7982
7983 DESCRIPTION:
7984 The function sends 'PDS/Set PPM Reporting State Request' (0x0048)
7985 and returns the response
7986
7987 PARAMETERS:
7988 handle [ I ] - Gobi interface handle
7989 to [ I ] - Timeout for transaction (in milliseconds)
7990 inLen [ I ] - Length of input buffer
7991 pIn [ I ] - Input buffer
7992 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
7993 contain, upon output the number of BYTEs copied
7994 to pOut
7995 pOut [ O ] - Output buffer
7996
7997 RETURN VALUE:
7998 ULONG - Return code
7999 ===========================================================================*/
8000 ULONG PDSSetPPMReportingState(
8001 GOBIHANDLE handle,
8002 ULONG to,
8003 ULONG inLen,
8004 const BYTE * pIn,
8005 ULONG * pOutLen,
8006 BYTE * pOut );
8007
8008 /*===========================================================================
8009 METHOD:
8010 PDSForceReceiverOff
8011
8012 DESCRIPTION:
8013 The function sends 'PDS/Force Receiver Off Request' (0x0049)
8014 and returns the response
8015
8016 PARAMETERS:
8017 handle [ I ] - Gobi interface handle
8018 to [ I ] - Timeout for transaction (in milliseconds)
8019 inLen [ I ] - Length of input buffer
8020 pIn [ I ] - Input buffer
8021 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8022 contain, upon output the number of BYTEs copied
8023 to pOut
8024 pOut [ O ] - Output buffer
8025
8026 RETURN VALUE:
8027 ULONG - Return code
8028 ===========================================================================*/
8029 ULONG PDSForceReceiverOff(
8030 GOBIHANDLE handle,
8031 ULONG to,
8032 ULONG inLen,
8033 const BYTE * pIn,
8034 ULONG * pOutLen,
8035 BYTE * pOut );
8036
8037 /*===========================================================================
8038 METHOD:
8039 PDSGetPositionMethodsState
8040
8041 DESCRIPTION:
8042 The function sends 'PDS/Get Position Methods State Request' (0x0050)
8043 and returns the response
8044
8045 PARAMETERS:
8046 handle [ I ] - Gobi interface handle
8047 to [ I ] - Timeout for transaction (in milliseconds)
8048 inLen [ I ] - Reserved for future use (set to 0)
8049 pIn [ I ] - Reserved for future use (set to 0)
8050 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8051 contain, upon output the number of BYTEs copied
8052 to pOut
8053 pOut [ O ] - Output buffer
8054
8055 RETURN VALUE:
8056 ULONG - Return code
8057 ===========================================================================*/
8058 ULONG PDSGetPositionMethodsState(
8059 GOBIHANDLE handle,
8060 ULONG to,
8061 ULONG inLen,
8062 const BYTE * pIn,
8063 ULONG * pOutLen,
8064 BYTE * pOut );
8065
8066 /*===========================================================================
8067 METHOD:
8068 PDSSetPositionMethodsState
8069
8070 DESCRIPTION:
8071 The function sends 'PDS/Set Position Methods State Request' (0x0051)
8072 and returns the response
8073
8074 PARAMETERS:
8075 handle [ I ] - Gobi interface handle
8076 to [ I ] - Timeout for transaction (in milliseconds)
8077 inLen [ I ] - Length of input buffer
8078 pIn [ I ] - Input buffer
8079 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8080 contain, upon output the number of BYTEs copied
8081 to pOut
8082 pOut [ O ] - Output buffer
8083
8084 RETURN VALUE:
8085 ULONG - Return code
8086 ===========================================================================*/
8087 ULONG PDSSetPositionMethodsState(
8088 GOBIHANDLE handle,
8089 ULONG to,
8090 ULONG inLen,
8091 const BYTE * pIn,
8092 ULONG * pOutLen,
8093 BYTE * pOut );
8094
8095 /*===========================================================================
8096 METHOD:
8097 PDSInjectSensorData
8098
8099 DESCRIPTION:
8100 The function sends 'PDS/Inject Sensor Data Request' (0x0052)
8101 and returns the response
8102
8103 PARAMETERS:
8104 handle [ I ] - Gobi interface handle
8105 to [ I ] - Timeout for transaction (in milliseconds)
8106 inLen [ I ] - Length of input buffer
8107 pIn [ I ] - Input buffer
8108 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8109 contain, upon output the number of BYTEs copied
8110 to pOut
8111 pOut [ O ] - Output buffer
8112
8113 RETURN VALUE:
8114 ULONG - Return code
8115 ===========================================================================*/
8116 ULONG PDSInjectSensorData(
8117 GOBIHANDLE handle,
8118 ULONG to,
8119 ULONG inLen,
8120 const BYTE * pIn,
8121 ULONG * pOutLen,
8122 BYTE * pOut );
8123
8124 /*===========================================================================
8125 METHOD:
8126 PDSInjectTimeSyncData
8127
8128 DESCRIPTION:
8129 The function sends 'PDS/Inject Time Sync Data Request' (0x0053)
8130 and returns the response
8131
8132 PARAMETERS:
8133 handle [ I ] - Gobi interface handle
8134 to [ I ] - Timeout for transaction (in milliseconds)
8135 inLen [ I ] - Length of input buffer
8136 pIn [ I ] - Input buffer
8137 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8138 contain, upon output the number of BYTEs copied
8139 to pOut
8140 pOut [ O ] - Output buffer
8141
8142 RETURN VALUE:
8143 ULONG - Return code
8144 ===========================================================================*/
8145 ULONG PDSInjectTimeSyncData(
8146 GOBIHANDLE handle,
8147 ULONG to,
8148 ULONG inLen,
8149 const BYTE * pIn,
8150 ULONG * pOutLen,
8151 BYTE * pOut );
8152
8153 /*===========================================================================
8154 METHOD:
8155 PDSGetSensorConfig
8156
8157 DESCRIPTION:
8158 The function sends 'PDS/Get Sensor Config Request' (0x0054)
8159 and returns the response
8160
8161 PARAMETERS:
8162 handle [ I ] - Gobi interface handle
8163 to [ I ] - Timeout for transaction (in milliseconds)
8164 inLen [ I ] - Reserved for future use (set to 0)
8165 pIn [ I ] - Reserved for future use (set to 0)
8166 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8167 contain, upon output the number of BYTEs copied
8168 to pOut
8169 pOut [ O ] - Output buffer
8170
8171 RETURN VALUE:
8172 ULONG - Return code
8173 ===========================================================================*/
8174 ULONG PDSGetSensorConfig(
8175 GOBIHANDLE handle,
8176 ULONG to,
8177 ULONG inLen,
8178 const BYTE * pIn,
8179 ULONG * pOutLen,
8180 BYTE * pOut );
8181
8182 /*===========================================================================
8183 METHOD:
8184 PDSSetSensorConfig
8185
8186 DESCRIPTION:
8187 The function sends 'PDS/Set Sensor Config Request' (0x0055)
8188 and returns the response
8189
8190 PARAMETERS:
8191 handle [ I ] - Gobi interface handle
8192 to [ I ] - Timeout for transaction (in milliseconds)
8193 inLen [ I ] - Length of input buffer
8194 pIn [ I ] - Input buffer
8195 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8196 contain, upon output the number of BYTEs copied
8197 to pOut
8198 pOut [ O ] - Output buffer
8199
8200 RETURN VALUE:
8201 ULONG - Return code
8202 ===========================================================================*/
8203 ULONG PDSSetSensorConfig(
8204 GOBIHANDLE handle,
8205 ULONG to,
8206 ULONG inLen,
8207 const BYTE * pIn,
8208 ULONG * pOutLen,
8209 BYTE * pOut );
8210
8211 /*===========================================================================
8212 METHOD:
8213 PDSGetSensorNavigation
8214
8215 DESCRIPTION:
8216 The function sends 'PDS/Get Sensor Navigation Request' (0x0056)
8217 and returns the response
8218
8219 PARAMETERS:
8220 handle [ I ] - Gobi interface handle
8221 to [ I ] - Timeout for transaction (in milliseconds)
8222 inLen [ I ] - Reserved for future use (set to 0)
8223 pIn [ I ] - Reserved for future use (set to 0)
8224 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8225 contain, upon output the number of BYTEs copied
8226 to pOut
8227 pOut [ O ] - Output buffer
8228
8229 RETURN VALUE:
8230 ULONG - Return code
8231 ===========================================================================*/
8232 ULONG PDSGetSensorNavigation(
8233 GOBIHANDLE handle,
8234 ULONG to,
8235 ULONG inLen,
8236 const BYTE * pIn,
8237 ULONG * pOutLen,
8238 BYTE * pOut );
8239
8240 /*===========================================================================
8241 METHOD:
8242 PDSSetNavigationConfig
8243
8244 DESCRIPTION:
8245 The function sends 'PDS/Set Navigation Config Request' (0x0057)
8246 and returns the response
8247
8248 PARAMETERS:
8249 handle [ I ] - Gobi interface handle
8250 to [ I ] - Timeout for transaction (in milliseconds)
8251 inLen [ I ] - Length of input buffer
8252 pIn [ I ] - Input buffer
8253 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8254 contain, upon output the number of BYTEs copied
8255 to pOut
8256 pOut [ O ] - Output buffer
8257
8258 RETURN VALUE:
8259 ULONG - Return code
8260 ===========================================================================*/
8261 ULONG PDSSetNavigationConfig(
8262 GOBIHANDLE handle,
8263 ULONG to,
8264 ULONG inLen,
8265 const BYTE * pIn,
8266 ULONG * pOutLen,
8267 BYTE * pOut );
8268
8269 /*===========================================================================
8270 METHOD:
8271 PDSSetWLANBlanking
8272
8273 DESCRIPTION:
8274 The function sends 'PDS/Set WLAN Blanking Request' (0x005A)
8275 and returns the response
8276
8277 PARAMETERS:
8278 handle [ I ] - Gobi interface handle
8279 to [ I ] - Timeout for transaction (in milliseconds)
8280 inLen [ I ] - Length of input buffer
8281 pIn [ I ] - Input buffer
8282 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8283 contain, upon output the number of BYTEs copied
8284 to pOut
8285 pOut [ O ] - Output buffer
8286
8287 RETURN VALUE:
8288 ULONG - Return code
8289 ===========================================================================*/
8290 ULONG PDSSetWLANBlanking(
8291 GOBIHANDLE handle,
8292 ULONG to,
8293 ULONG inLen,
8294 const BYTE * pIn,
8295 ULONG * pOutLen,
8296 BYTE * pOut );
8297
8298 /*===========================================================================
8299 METHOD:
8300 PDSSetSecurityChallengeReport
8301
8302 DESCRIPTION:
8303 The function sends 'PDS/Set Security Challenge Report Request' (0x005B)
8304 and returns the response
8305
8306 PARAMETERS:
8307 handle [ I ] - Gobi interface handle
8308 to [ I ] - Timeout for transaction (in milliseconds)
8309 inLen [ I ] - Length of input buffer
8310 pIn [ I ] - Input buffer
8311 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8312 contain, upon output the number of BYTEs copied
8313 to pOut
8314 pOut [ O ] - Output buffer
8315
8316 RETURN VALUE:
8317 ULONG - Return code
8318 ===========================================================================*/
8319 ULONG PDSSetSecurityChallengeReport(
8320 GOBIHANDLE handle,
8321 ULONG to,
8322 ULONG inLen,
8323 const BYTE * pIn,
8324 ULONG * pOutLen,
8325 BYTE * pOut );
8326
8327 /*===========================================================================
8328 METHOD:
8329 PDSSetSecurityChallenge
8330
8331 DESCRIPTION:
8332 The function sends 'PDS/Set Security Challenge Request' (0x005C)
8333 and returns the response
8334
8335 PARAMETERS:
8336 handle [ I ] - Gobi interface handle
8337 to [ I ] - Timeout for transaction (in milliseconds)
8338 inLen [ I ] - Length of input buffer
8339 pIn [ I ] - Input buffer
8340 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8341 contain, upon output the number of BYTEs copied
8342 to pOut
8343 pOut [ O ] - Output buffer
8344
8345 RETURN VALUE:
8346 ULONG - Return code
8347 ===========================================================================*/
8348 ULONG PDSSetSecurityChallenge(
8349 GOBIHANDLE handle,
8350 ULONG to,
8351 ULONG inLen,
8352 const BYTE * pIn,
8353 ULONG * pOutLen,
8354 BYTE * pOut );
8355
8356 /*===========================================================================
8357 METHOD:
8358 PDSGetSecurityEncryptionConfig
8359
8360 DESCRIPTION:
8361 The function sends 'PDS/Get Security Encryption Config Request' (0x005D)
8362 and returns the response
8363
8364 PARAMETERS:
8365 handle [ I ] - Gobi interface handle
8366 to [ I ] - Timeout for transaction (in milliseconds)
8367 inLen [ I ] - Reserved for future use (set to 0)
8368 pIn [ I ] - Reserved for future use (set to 0)
8369 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8370 contain, upon output the number of BYTEs copied
8371 to pOut
8372 pOut [ O ] - Output buffer
8373
8374 RETURN VALUE:
8375 ULONG - Return code
8376 ===========================================================================*/
8377 ULONG PDSGetSecurityEncryptionConfig(
8378 GOBIHANDLE handle,
8379 ULONG to,
8380 ULONG inLen,
8381 const BYTE * pIn,
8382 ULONG * pOutLen,
8383 BYTE * pOut );
8384
8385 /*===========================================================================
8386 METHOD:
8387 PDSSetSecurityUpdateRate
8388
8389 DESCRIPTION:
8390 The function sends 'PDS/Set Security Update Rate Request' (0x005E)
8391 and returns the response
8392
8393 PARAMETERS:
8394 handle [ I ] - Gobi interface handle
8395 to [ I ] - Timeout for transaction (in milliseconds)
8396 inLen [ I ] - Length of input buffer
8397 pIn [ I ] - Input buffer
8398 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8399 contain, upon output the number of BYTEs copied
8400 to pOut
8401 pOut [ O ] - Output buffer
8402
8403 RETURN VALUE:
8404 ULONG - Return code
8405 ===========================================================================*/
8406 ULONG PDSSetSecurityUpdateRate(
8407 GOBIHANDLE handle,
8408 ULONG to,
8409 ULONG inLen,
8410 const BYTE * pIn,
8411 ULONG * pOutLen,
8412 BYTE * pOut );
8413
8414 /*===========================================================================
8415 METHOD:
8416 PDSSetCellDatabaseControl
8417
8418 DESCRIPTION:
8419 The function sends 'PDS/Set Cell Database Control Request' (0x005F)
8420 and returns the response
8421
8422 PARAMETERS:
8423 handle [ I ] - Gobi interface handle
8424 to [ I ] - Timeout for transaction (in milliseconds)
8425 inLen [ I ] - Length of input buffer
8426 pIn [ I ] - Input buffer
8427 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8428 contain, upon output the number of BYTEs copied
8429 to pOut
8430 pOut [ O ] - Output buffer
8431
8432 RETURN VALUE:
8433 ULONG - Return code
8434 ===========================================================================*/
8435 ULONG PDSSetCellDatabaseControl(
8436 GOBIHANDLE handle,
8437 ULONG to,
8438 ULONG inLen,
8439 const BYTE * pIn,
8440 ULONG * pOutLen,
8441 BYTE * pOut );
8442
8443 /*===========================================================================
8444 METHOD:
8445 PDSInjectMotionData
8446
8447 DESCRIPTION:
8448 The function sends 'PDS/Inject Motion Data Request' (0x0061)
8449 and returns the response
8450
8451 PARAMETERS:
8452 handle [ I ] - Gobi interface handle
8453 to [ I ] - Timeout for transaction (in milliseconds)
8454 inLen [ I ] - Length of input buffer
8455 pIn [ I ] - Input buffer
8456 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8457 contain, upon output the number of BYTEs copied
8458 to pOut
8459 pOut [ O ] - Output buffer
8460
8461 RETURN VALUE:
8462 ULONG - Return code
8463 ===========================================================================*/
8464 ULONG PDSInjectMotionData(
8465 GOBIHANDLE handle,
8466 ULONG to,
8467 ULONG inLen,
8468 const BYTE * pIn,
8469 ULONG * pOutLen,
8470 BYTE * pOut );
8471
8472 /*===========================================================================
8473 METHOD:
8474 PDSSetGNSSEngineErrorRecoveryReport
8475
8476 DESCRIPTION:
8477 The function sends 'PDS/Set GNSS Engine Error Recovery Report Request' (0x0062)
8478 and returns the response
8479
8480 PARAMETERS:
8481 handle [ I ] - Gobi interface handle
8482 to [ I ] - Timeout for transaction (in milliseconds)
8483 inLen [ I ] - Length of input buffer
8484 pIn [ I ] - Input buffer
8485 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8486 contain, upon output the number of BYTEs copied
8487 to pOut
8488 pOut [ O ] - Output buffer
8489
8490 RETURN VALUE:
8491 ULONG - Return code
8492 ===========================================================================*/
8493 ULONG PDSSetGNSSEngineErrorRecoveryReport(
8494 GOBIHANDLE handle,
8495 ULONG to,
8496 ULONG inLen,
8497 const BYTE * pIn,
8498 ULONG * pOutLen,
8499 BYTE * pOut );
8500
8501 /*===========================================================================
8502 METHOD:
8503 PDSResetLocationService
8504
8505 DESCRIPTION:
8506 The function sends 'PDS/Reset Location Service Request' (0x0063)
8507 and returns the response
8508
8509 PARAMETERS:
8510 handle [ I ] - Gobi interface handle
8511 to [ I ] - Timeout for transaction (in milliseconds)
8512 inLen [ I ] - Reserved for future use (set to 0)
8513 pIn [ I ] - Reserved for future use (set to 0)
8514 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8515 contain, upon output the number of BYTEs copied
8516 to pOut
8517 pOut [ O ] - Output buffer
8518
8519 RETURN VALUE:
8520 ULONG - Return code
8521 ===========================================================================*/
8522 ULONG PDSResetLocationService(
8523 GOBIHANDLE handle,
8524 ULONG to,
8525 ULONG inLen,
8526 const BYTE * pIn,
8527 ULONG * pOutLen,
8528 BYTE * pOut );
8529
8530 /*===========================================================================
8531 METHOD:
8532 PDSInjectTestData
8533
8534 DESCRIPTION:
8535 The function sends 'PDS/Inject Test Data Request' (0x0064)
8536 and returns the response
8537
8538 PARAMETERS:
8539 handle [ I ] - Gobi interface handle
8540 to [ I ] - Timeout for transaction (in milliseconds)
8541 inLen [ I ] - Length of input buffer
8542 pIn [ I ] - Input buffer
8543 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8544 contain, upon output the number of BYTEs copied
8545 to pOut
8546 pOut [ O ] - Output buffer
8547
8548 RETURN VALUE:
8549 ULONG - Return code
8550 ===========================================================================*/
8551 ULONG PDSInjectTestData(
8552 GOBIHANDLE handle,
8553 ULONG to,
8554 ULONG inLen,
8555 const BYTE * pIn,
8556 ULONG * pOutLen,
8557 BYTE * pOut );
8558
8559 /*===========================================================================
8560 METHOD:
8561 PDSSetGNSSRFConfig
8562
8563 DESCRIPTION:
8564 The function sends 'PDS/Set GNSS RF Config Request' (0x0065)
8565 and returns the response
8566
8567 PARAMETERS:
8568 handle [ I ] - Gobi interface handle
8569 to [ I ] - Timeout for transaction (in milliseconds)
8570 inLen [ I ] - Length of input buffer
8571 pIn [ I ] - Input buffer
8572 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8573 contain, upon output the number of BYTEs copied
8574 to pOut
8575 pOut [ O ] - Output buffer
8576
8577 RETURN VALUE:
8578 ULONG - Return code
8579 ===========================================================================*/
8580 ULONG PDSSetGNSSRFConfig(
8581 GOBIHANDLE handle,
8582 ULONG to,
8583 ULONG inLen,
8584 const BYTE * pIn,
8585 ULONG * pOutLen,
8586 BYTE * pOut );
8587
8588 /*===========================================================================
8589 METHOD:
8590 AUTHStartEAPSession
8591
8592 DESCRIPTION:
8593 The function sends 'AUTH/Start EAP Session Request' (0x0020)
8594 and returns the response
8595
8596 PARAMETERS:
8597 handle [ I ] - Gobi interface handle
8598 to [ I ] - Timeout for transaction (in milliseconds)
8599 inLen [ I ] - Length of input buffer
8600 pIn [ I ] - Input buffer
8601 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8602 contain, upon output the number of BYTEs copied
8603 to pOut
8604 pOut [ O ] - Output buffer
8605
8606 RETURN VALUE:
8607 ULONG - Return code
8608 ===========================================================================*/
8609 ULONG AUTHStartEAPSession(
8610 GOBIHANDLE handle,
8611 ULONG to,
8612 ULONG inLen,
8613 const BYTE * pIn,
8614 ULONG * pOutLen,
8615 BYTE * pOut );
8616
8617 /*===========================================================================
8618 METHOD:
8619 AUTHSendEAPPacket
8620
8621 DESCRIPTION:
8622 The function sends 'AUTH/Send EAP Packet Request' (0x0021)
8623 and returns the response
8624
8625 PARAMETERS:
8626 handle [ I ] - Gobi interface handle
8627 to [ I ] - Timeout for transaction (in milliseconds)
8628 inLen [ I ] - Length of input buffer
8629 pIn [ I ] - Input buffer
8630 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8631 contain, upon output the number of BYTEs copied
8632 to pOut
8633 pOut [ O ] - Output buffer
8634
8635 RETURN VALUE:
8636 ULONG - Return code
8637 ===========================================================================*/
8638 ULONG AUTHSendEAPPacket(
8639 GOBIHANDLE handle,
8640 ULONG to,
8641 ULONG inLen,
8642 const BYTE * pIn,
8643 ULONG * pOutLen,
8644 BYTE * pOut );
8645
8646 /*===========================================================================
8647 METHOD:
8648 AUTHGetEAPSessionKeys
8649
8650 DESCRIPTION:
8651 The function sends 'AUTH/Get EAP Session Keys Request' (0x0023)
8652 and returns the response
8653
8654 PARAMETERS:
8655 handle [ I ] - Gobi interface handle
8656 to [ I ] - Timeout for transaction (in milliseconds)
8657 inLen [ I ] - Reserved for future use (set to 0)
8658 pIn [ I ] - Reserved for future use (set to 0)
8659 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8660 contain, upon output the number of BYTEs copied
8661 to pOut
8662 pOut [ O ] - Output buffer
8663
8664 RETURN VALUE:
8665 ULONG - Return code
8666 ===========================================================================*/
8667 ULONG AUTHGetEAPSessionKeys(
8668 GOBIHANDLE handle,
8669 ULONG to,
8670 ULONG inLen,
8671 const BYTE * pIn,
8672 ULONG * pOutLen,
8673 BYTE * pOut );
8674
8675 /*===========================================================================
8676 METHOD:
8677 AUTHEndEAPSession
8678
8679 DESCRIPTION:
8680 The function sends 'AUTH/End EAP Session Request' (0x0024)
8681 and returns the response
8682
8683 PARAMETERS:
8684 handle [ I ] - Gobi interface handle
8685 to [ I ] - Timeout for transaction (in milliseconds)
8686 inLen [ I ] - Reserved for future use (set to 0)
8687 pIn [ I ] - Reserved for future use (set to 0)
8688 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8689 contain, upon output the number of BYTEs copied
8690 to pOut
8691 pOut [ O ] - Output buffer
8692
8693 RETURN VALUE:
8694 ULONG - Return code
8695 ===========================================================================*/
8696 ULONG AUTHEndEAPSession(
8697 GOBIHANDLE handle,
8698 ULONG to,
8699 ULONG inLen,
8700 const BYTE * pIn,
8701 ULONG * pOutLen,
8702 BYTE * pOut );
8703
8704 /*===========================================================================
8705 METHOD:
8706 AUTHRunAKA
8707
8708 DESCRIPTION:
8709 The function sends 'AUTH/Run AKA Request' (0x0025)
8710 and returns the response
8711
8712 PARAMETERS:
8713 handle [ I ] - Gobi interface handle
8714 to [ I ] - Timeout for transaction (in milliseconds)
8715 inLen [ I ] - Length of input buffer
8716 pIn [ I ] - Input buffer
8717 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8718 contain, upon output the number of BYTEs copied
8719 to pOut
8720 pOut [ O ] - Output buffer
8721
8722 RETURN VALUE:
8723 ULONG - Return code
8724 ===========================================================================*/
8725 ULONG AUTHRunAKA(
8726 GOBIHANDLE handle,
8727 ULONG to,
8728 ULONG inLen,
8729 const BYTE * pIn,
8730 ULONG * pOutLen,
8731 BYTE * pOut );
8732
8733 /*===========================================================================
8734 METHOD:
8735 VoiceIndicationRegistration
8736
8737 DESCRIPTION:
8738 The function sends 'Voice/Indication Registration Request' (0x0003)
8739 and returns the response
8740
8741 PARAMETERS:
8742 handle [ I ] - Gobi interface handle
8743 to [ I ] - Timeout for transaction (in milliseconds)
8744 inLen [ I ] - Length of input buffer
8745 pIn [ I ] - Input buffer
8746 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8747 contain, upon output the number of BYTEs copied
8748 to pOut
8749 pOut [ O ] - Output buffer
8750
8751 RETURN VALUE:
8752 ULONG - Return code
8753 ===========================================================================*/
8754 ULONG VoiceIndicationRegistration(
8755 GOBIHANDLE handle,
8756 ULONG to,
8757 ULONG inLen,
8758 const BYTE * pIn,
8759 ULONG * pOutLen,
8760 BYTE * pOut );
8761
8762 /*===========================================================================
8763 METHOD:
8764 VoiceCallOriginate
8765
8766 DESCRIPTION:
8767 The function sends 'Voice/Call Originate Request' (0x0020)
8768 and returns the response
8769
8770 PARAMETERS:
8771 handle [ I ] - Gobi interface handle
8772 to [ I ] - Timeout for transaction (in milliseconds)
8773 inLen [ I ] - Length of input buffer
8774 pIn [ I ] - Input buffer
8775 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8776 contain, upon output the number of BYTEs copied
8777 to pOut
8778 pOut [ O ] - Output buffer
8779
8780 RETURN VALUE:
8781 ULONG - Return code
8782 ===========================================================================*/
8783 ULONG VoiceCallOriginate(
8784 GOBIHANDLE handle,
8785 ULONG to,
8786 ULONG inLen,
8787 const BYTE * pIn,
8788 ULONG * pOutLen,
8789 BYTE * pOut );
8790
8791 /*===========================================================================
8792 METHOD:
8793 VoiceCallEnd
8794
8795 DESCRIPTION:
8796 The function sends 'Voice/Call End Request' (0x0021)
8797 and returns the response
8798
8799 PARAMETERS:
8800 handle [ I ] - Gobi interface handle
8801 to [ I ] - Timeout for transaction (in milliseconds)
8802 inLen [ I ] - Length of input buffer
8803 pIn [ I ] - Input buffer
8804 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8805 contain, upon output the number of BYTEs copied
8806 to pOut
8807 pOut [ O ] - Output buffer
8808
8809 RETURN VALUE:
8810 ULONG - Return code
8811 ===========================================================================*/
8812 ULONG VoiceCallEnd(
8813 GOBIHANDLE handle,
8814 ULONG to,
8815 ULONG inLen,
8816 const BYTE * pIn,
8817 ULONG * pOutLen,
8818 BYTE * pOut );
8819
8820 /*===========================================================================
8821 METHOD:
8822 VoiceCallAnswer
8823
8824 DESCRIPTION:
8825 The function sends 'Voice/Call Answer Request' (0x0022)
8826 and returns the response
8827
8828 PARAMETERS:
8829 handle [ I ] - Gobi interface handle
8830 to [ I ] - Timeout for transaction (in milliseconds)
8831 inLen [ I ] - Length of input buffer
8832 pIn [ I ] - Input buffer
8833 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8834 contain, upon output the number of BYTEs copied
8835 to pOut
8836 pOut [ O ] - Output buffer
8837
8838 RETURN VALUE:
8839 ULONG - Return code
8840 ===========================================================================*/
8841 ULONG VoiceCallAnswer(
8842 GOBIHANDLE handle,
8843 ULONG to,
8844 ULONG inLen,
8845 const BYTE * pIn,
8846 ULONG * pOutLen,
8847 BYTE * pOut );
8848
8849 /*===========================================================================
8850 METHOD:
8851 VoiceGetCallInfo
8852
8853 DESCRIPTION:
8854 The function sends 'Voice/Get Call Info Request' (0x0024)
8855 and returns the response
8856
8857 PARAMETERS:
8858 handle [ I ] - Gobi interface handle
8859 to [ I ] - Timeout for transaction (in milliseconds)
8860 inLen [ I ] - Length of input buffer
8861 pIn [ I ] - Input buffer
8862 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8863 contain, upon output the number of BYTEs copied
8864 to pOut
8865 pOut [ O ] - Output buffer
8866
8867 RETURN VALUE:
8868 ULONG - Return code
8869 ===========================================================================*/
8870 ULONG VoiceGetCallInfo(
8871 GOBIHANDLE handle,
8872 ULONG to,
8873 ULONG inLen,
8874 const BYTE * pIn,
8875 ULONG * pOutLen,
8876 BYTE * pOut );
8877
8878 /*===========================================================================
8879 METHOD:
8880 VoiceSendFlash
8881
8882 DESCRIPTION:
8883 The function sends 'Voice/Send Flash Request' (0x0027)
8884 and returns the response
8885
8886 PARAMETERS:
8887 handle [ I ] - Gobi interface handle
8888 to [ I ] - Timeout for transaction (in milliseconds)
8889 inLen [ I ] - Length of input buffer
8890 pIn [ I ] - Input buffer
8891 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8892 contain, upon output the number of BYTEs copied
8893 to pOut
8894 pOut [ O ] - Output buffer
8895
8896 RETURN VALUE:
8897 ULONG - Return code
8898 ===========================================================================*/
8899 ULONG VoiceSendFlash(
8900 GOBIHANDLE handle,
8901 ULONG to,
8902 ULONG inLen,
8903 const BYTE * pIn,
8904 ULONG * pOutLen,
8905 BYTE * pOut );
8906
8907 /*===========================================================================
8908 METHOD:
8909 VoiceBurstDTMF
8910
8911 DESCRIPTION:
8912 The function sends 'Voice/Burst DTMF Request' (0x0028)
8913 and returns the response
8914
8915 PARAMETERS:
8916 handle [ I ] - Gobi interface handle
8917 to [ I ] - Timeout for transaction (in milliseconds)
8918 inLen [ I ] - Length of input buffer
8919 pIn [ I ] - Input buffer
8920 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8921 contain, upon output the number of BYTEs copied
8922 to pOut
8923 pOut [ O ] - Output buffer
8924
8925 RETURN VALUE:
8926 ULONG - Return code
8927 ===========================================================================*/
8928 ULONG VoiceBurstDTMF(
8929 GOBIHANDLE handle,
8930 ULONG to,
8931 ULONG inLen,
8932 const BYTE * pIn,
8933 ULONG * pOutLen,
8934 BYTE * pOut );
8935
8936 /*===========================================================================
8937 METHOD:
8938 VoiceStartContinuousDTMF
8939
8940 DESCRIPTION:
8941 The function sends 'Voice/Start Continuous DTMF Request' (0x0029)
8942 and returns the response
8943
8944 PARAMETERS:
8945 handle [ I ] - Gobi interface handle
8946 to [ I ] - Timeout for transaction (in milliseconds)
8947 inLen [ I ] - Length of input buffer
8948 pIn [ I ] - Input buffer
8949 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8950 contain, upon output the number of BYTEs copied
8951 to pOut
8952 pOut [ O ] - Output buffer
8953
8954 RETURN VALUE:
8955 ULONG - Return code
8956 ===========================================================================*/
8957 ULONG VoiceStartContinuousDTMF(
8958 GOBIHANDLE handle,
8959 ULONG to,
8960 ULONG inLen,
8961 const BYTE * pIn,
8962 ULONG * pOutLen,
8963 BYTE * pOut );
8964
8965 /*===========================================================================
8966 METHOD:
8967 VoiceStopContinuousDTMF
8968
8969 DESCRIPTION:
8970 The function sends 'Voice/Stop Continuous DTMF Request' (0x002A)
8971 and returns the response
8972
8973 PARAMETERS:
8974 handle [ I ] - Gobi interface handle
8975 to [ I ] - Timeout for transaction (in milliseconds)
8976 inLen [ I ] - Length of input buffer
8977 pIn [ I ] - Input buffer
8978 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
8979 contain, upon output the number of BYTEs copied
8980 to pOut
8981 pOut [ O ] - Output buffer
8982
8983 RETURN VALUE:
8984 ULONG - Return code
8985 ===========================================================================*/
8986 ULONG VoiceStopContinuousDTMF(
8987 GOBIHANDLE handle,
8988 ULONG to,
8989 ULONG inLen,
8990 const BYTE * pIn,
8991 ULONG * pOutLen,
8992 BYTE * pOut );
8993
8994 /*===========================================================================
8995 METHOD:
8996 VoiceSetPreferredPrivacy
8997
8998 DESCRIPTION:
8999 The function sends 'Voice/Set Preferred Privacy Request' (0x002C)
9000 and returns the response
9001
9002 PARAMETERS:
9003 handle [ I ] - Gobi interface handle
9004 to [ I ] - Timeout for transaction (in milliseconds)
9005 inLen [ I ] - Length of input buffer
9006 pIn [ I ] - Input buffer
9007 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9008 contain, upon output the number of BYTEs copied
9009 to pOut
9010 pOut [ O ] - Output buffer
9011
9012 RETURN VALUE:
9013 ULONG - Return code
9014 ===========================================================================*/
9015 ULONG VoiceSetPreferredPrivacy(
9016 GOBIHANDLE handle,
9017 ULONG to,
9018 ULONG inLen,
9019 const BYTE * pIn,
9020 ULONG * pOutLen,
9021 BYTE * pOut );
9022
9023 /*===========================================================================
9024 METHOD:
9025 VoiceGetAllCallInfo
9026
9027 DESCRIPTION:
9028 The function sends 'Voice/Get All Call Info Request' (0x002F)
9029 and returns the response
9030
9031 PARAMETERS:
9032 handle [ I ] - Gobi interface handle
9033 to [ I ] - Timeout for transaction (in milliseconds)
9034 inLen [ I ] - Reserved for future use (set to 0)
9035 pIn [ I ] - Reserved for future use (set to 0)
9036 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9037 contain, upon output the number of BYTEs copied
9038 to pOut
9039 pOut [ O ] - Output buffer
9040
9041 RETURN VALUE:
9042 ULONG - Return code
9043 ===========================================================================*/
9044 ULONG VoiceGetAllCallInfo(
9045 GOBIHANDLE handle,
9046 ULONG to,
9047 ULONG inLen,
9048 const BYTE * pIn,
9049 ULONG * pOutLen,
9050 BYTE * pOut );
9051
9052 /*===========================================================================
9053 METHOD:
9054 VoiceManageCalls
9055
9056 DESCRIPTION:
9057 The function sends 'Voice/Manage Calls Request' (0x0031)
9058 and returns the response
9059
9060 PARAMETERS:
9061 handle [ I ] - Gobi interface handle
9062 to [ I ] - Timeout for transaction (in milliseconds)
9063 inLen [ I ] - Length of input buffer
9064 pIn [ I ] - Input buffer
9065 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9066 contain, upon output the number of BYTEs copied
9067 to pOut
9068 pOut [ O ] - Output buffer
9069
9070 RETURN VALUE:
9071 ULONG - Return code
9072 ===========================================================================*/
9073 ULONG VoiceManageCalls(
9074 GOBIHANDLE handle,
9075 ULONG to,
9076 ULONG inLen,
9077 const BYTE * pIn,
9078 ULONG * pOutLen,
9079 BYTE * pOut );
9080
9081 /*===========================================================================
9082 METHOD:
9083 VoiceSetSupplementaryService
9084
9085 DESCRIPTION:
9086 The function sends 'Voice/Set Supplementary Service Request' (0x0033)
9087 and returns the response
9088
9089 PARAMETERS:
9090 handle [ I ] - Gobi interface handle
9091 to [ I ] - Timeout for transaction (in milliseconds)
9092 inLen [ I ] - Length of input buffer
9093 pIn [ I ] - Input buffer
9094 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9095 contain, upon output the number of BYTEs copied
9096 to pOut
9097 pOut [ O ] - Output buffer
9098
9099 RETURN VALUE:
9100 ULONG - Return code
9101 ===========================================================================*/
9102 ULONG VoiceSetSupplementaryService(
9103 GOBIHANDLE handle,
9104 ULONG to,
9105 ULONG inLen,
9106 const BYTE * pIn,
9107 ULONG * pOutLen,
9108 BYTE * pOut );
9109
9110 /*===========================================================================
9111 METHOD:
9112 VoiceGetCallWaiting
9113
9114 DESCRIPTION:
9115 The function sends 'Voice/Get Call Waiting Request' (0x0034)
9116 and returns the response
9117
9118 PARAMETERS:
9119 handle [ I ] - Gobi interface handle
9120 to [ I ] - Timeout for transaction (in milliseconds)
9121 inLen [ I ] - Length of input buffer
9122 pIn [ I ] - Input buffer
9123 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9124 contain, upon output the number of BYTEs copied
9125 to pOut
9126 pOut [ O ] - Output buffer
9127
9128 RETURN VALUE:
9129 ULONG - Return code
9130 ===========================================================================*/
9131 ULONG VoiceGetCallWaiting(
9132 GOBIHANDLE handle,
9133 ULONG to,
9134 ULONG inLen,
9135 const BYTE * pIn,
9136 ULONG * pOutLen,
9137 BYTE * pOut );
9138
9139 /*===========================================================================
9140 METHOD:
9141 VoiceGetCallBarring
9142
9143 DESCRIPTION:
9144 The function sends 'Voice/Get Call Barring Request' (0x0035)
9145 and returns the response
9146
9147 PARAMETERS:
9148 handle [ I ] - Gobi interface handle
9149 to [ I ] - Timeout for transaction (in milliseconds)
9150 inLen [ I ] - Length of input buffer
9151 pIn [ I ] - Input buffer
9152 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9153 contain, upon output the number of BYTEs copied
9154 to pOut
9155 pOut [ O ] - Output buffer
9156
9157 RETURN VALUE:
9158 ULONG - Return code
9159 ===========================================================================*/
9160 ULONG VoiceGetCallBarring(
9161 GOBIHANDLE handle,
9162 ULONG to,
9163 ULONG inLen,
9164 const BYTE * pIn,
9165 ULONG * pOutLen,
9166 BYTE * pOut );
9167
9168 /*===========================================================================
9169 METHOD:
9170 VoiceGetCLIP
9171
9172 DESCRIPTION:
9173 The function sends 'Voice/Get CLIP Request' (0x0036)
9174 and returns the response
9175
9176 PARAMETERS:
9177 handle [ I ] - Gobi interface handle
9178 to [ I ] - Timeout for transaction (in milliseconds)
9179 inLen [ I ] - Reserved for future use (set to 0)
9180 pIn [ I ] - Reserved for future use (set to 0)
9181 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9182 contain, upon output the number of BYTEs copied
9183 to pOut
9184 pOut [ O ] - Output buffer
9185
9186 RETURN VALUE:
9187 ULONG - Return code
9188 ===========================================================================*/
9189 ULONG VoiceGetCLIP(
9190 GOBIHANDLE handle,
9191 ULONG to,
9192 ULONG inLen,
9193 const BYTE * pIn,
9194 ULONG * pOutLen,
9195 BYTE * pOut );
9196
9197 /*===========================================================================
9198 METHOD:
9199 VoiceGetCLIR
9200
9201 DESCRIPTION:
9202 The function sends 'Voice/Get CLIR Request' (0x0037)
9203 and returns the response
9204
9205 PARAMETERS:
9206 handle [ I ] - Gobi interface handle
9207 to [ I ] - Timeout for transaction (in milliseconds)
9208 inLen [ I ] - Reserved for future use (set to 0)
9209 pIn [ I ] - Reserved for future use (set to 0)
9210 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9211 contain, upon output the number of BYTEs copied
9212 to pOut
9213 pOut [ O ] - Output buffer
9214
9215 RETURN VALUE:
9216 ULONG - Return code
9217 ===========================================================================*/
9218 ULONG VoiceGetCLIR(
9219 GOBIHANDLE handle,
9220 ULONG to,
9221 ULONG inLen,
9222 const BYTE * pIn,
9223 ULONG * pOutLen,
9224 BYTE * pOut );
9225
9226 /*===========================================================================
9227 METHOD:
9228 VoiceGetCallForwarding
9229
9230 DESCRIPTION:
9231 The function sends 'Voice/Get Call Forwarding Request' (0x0038)
9232 and returns the response
9233
9234 PARAMETERS:
9235 handle [ I ] - Gobi interface handle
9236 to [ I ] - Timeout for transaction (in milliseconds)
9237 inLen [ I ] - Length of input buffer
9238 pIn [ I ] - Input buffer
9239 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9240 contain, upon output the number of BYTEs copied
9241 to pOut
9242 pOut [ O ] - Output buffer
9243
9244 RETURN VALUE:
9245 ULONG - Return code
9246 ===========================================================================*/
9247 ULONG VoiceGetCallForwarding(
9248 GOBIHANDLE handle,
9249 ULONG to,
9250 ULONG inLen,
9251 const BYTE * pIn,
9252 ULONG * pOutLen,
9253 BYTE * pOut );
9254
9255 /*===========================================================================
9256 METHOD:
9257 VoiceSetCallBarringPassword
9258
9259 DESCRIPTION:
9260 The function sends 'Voice/Set Call Barring Password Request' (0x0039)
9261 and returns the response
9262
9263 PARAMETERS:
9264 handle [ I ] - Gobi interface handle
9265 to [ I ] - Timeout for transaction (in milliseconds)
9266 inLen [ I ] - Length of input buffer
9267 pIn [ I ] - Input buffer
9268 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9269 contain, upon output the number of BYTEs copied
9270 to pOut
9271 pOut [ O ] - Output buffer
9272
9273 RETURN VALUE:
9274 ULONG - Return code
9275 ===========================================================================*/
9276 ULONG VoiceSetCallBarringPassword(
9277 GOBIHANDLE handle,
9278 ULONG to,
9279 ULONG inLen,
9280 const BYTE * pIn,
9281 ULONG * pOutLen,
9282 BYTE * pOut );
9283
9284 /*===========================================================================
9285 METHOD:
9286 VoiceInitiateUSSD
9287
9288 DESCRIPTION:
9289 The function sends 'Voice/Initiate USSD Request' (0x003A)
9290 and returns the response
9291
9292 PARAMETERS:
9293 handle [ I ] - Gobi interface handle
9294 to [ I ] - Timeout for transaction (in milliseconds)
9295 inLen [ I ] - Length of input buffer
9296 pIn [ I ] - Input buffer
9297 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9298 contain, upon output the number of BYTEs copied
9299 to pOut
9300 pOut [ O ] - Output buffer
9301
9302 RETURN VALUE:
9303 ULONG - Return code
9304 ===========================================================================*/
9305 ULONG VoiceInitiateUSSD(
9306 GOBIHANDLE handle,
9307 ULONG to,
9308 ULONG inLen,
9309 const BYTE * pIn,
9310 ULONG * pOutLen,
9311 BYTE * pOut );
9312
9313 /*===========================================================================
9314 METHOD:
9315 VoiceAnswerUSSD
9316
9317 DESCRIPTION:
9318 The function sends 'Voice/Answer USSD Request' (0x003B)
9319 and returns the response
9320
9321 PARAMETERS:
9322 handle [ I ] - Gobi interface handle
9323 to [ I ] - Timeout for transaction (in milliseconds)
9324 inLen [ I ] - Length of input buffer
9325 pIn [ I ] - Input buffer
9326 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9327 contain, upon output the number of BYTEs copied
9328 to pOut
9329 pOut [ O ] - Output buffer
9330
9331 RETURN VALUE:
9332 ULONG - Return code
9333 ===========================================================================*/
9334 ULONG VoiceAnswerUSSD(
9335 GOBIHANDLE handle,
9336 ULONG to,
9337 ULONG inLen,
9338 const BYTE * pIn,
9339 ULONG * pOutLen,
9340 BYTE * pOut );
9341
9342 /*===========================================================================
9343 METHOD:
9344 VoiceCancelUSSD
9345
9346 DESCRIPTION:
9347 The function sends 'Voice/Cancel USSD Request' (0x003C)
9348 and returns the response
9349
9350 PARAMETERS:
9351 handle [ I ] - Gobi interface handle
9352 to [ I ] - Timeout for transaction (in milliseconds)
9353 inLen [ I ] - Reserved for future use (set to 0)
9354 pIn [ I ] - Reserved for future use (set to 0)
9355 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9356 contain, upon output the number of BYTEs copied
9357 to pOut
9358 pOut [ O ] - Output buffer
9359
9360 RETURN VALUE:
9361 ULONG - Return code
9362 ===========================================================================*/
9363 ULONG VoiceCancelUSSD(
9364 GOBIHANDLE handle,
9365 ULONG to,
9366 ULONG inLen,
9367 const BYTE * pIn,
9368 ULONG * pOutLen,
9369 BYTE * pOut );
9370
9371 /*===========================================================================
9372 METHOD:
9373 VoiceSetConfig
9374
9375 DESCRIPTION:
9376 The function sends 'Voice/Set Config Request' (0x0040)
9377 and returns the response
9378
9379 PARAMETERS:
9380 handle [ I ] - Gobi interface handle
9381 to [ I ] - Timeout for transaction (in milliseconds)
9382 inLen [ I ] - Length of input buffer
9383 pIn [ I ] - Input buffer
9384 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9385 contain, upon output the number of BYTEs copied
9386 to pOut
9387 pOut [ O ] - Output buffer
9388
9389 RETURN VALUE:
9390 ULONG - Return code
9391 ===========================================================================*/
9392 ULONG VoiceSetConfig(
9393 GOBIHANDLE handle,
9394 ULONG to,
9395 ULONG inLen,
9396 const BYTE * pIn,
9397 ULONG * pOutLen,
9398 BYTE * pOut );
9399
9400 /*===========================================================================
9401 METHOD:
9402 VoiceGetConfig
9403
9404 DESCRIPTION:
9405 The function sends 'Voice/Get Config Request' (0x0041)
9406 and returns the response
9407
9408 PARAMETERS:
9409 handle [ I ] - Gobi interface handle
9410 to [ I ] - Timeout for transaction (in milliseconds)
9411 inLen [ I ] - Length of input buffer
9412 pIn [ I ] - Input buffer
9413 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9414 contain, upon output the number of BYTEs copied
9415 to pOut
9416 pOut [ O ] - Output buffer
9417
9418 RETURN VALUE:
9419 ULONG - Return code
9420 ===========================================================================*/
9421 ULONG VoiceGetConfig(
9422 GOBIHANDLE handle,
9423 ULONG to,
9424 ULONG inLen,
9425 const BYTE * pIn,
9426 ULONG * pOutLen,
9427 BYTE * pOut );
9428
9429 /*===========================================================================
9430 METHOD:
9431 VoiceAsyncInitiateUSSD
9432
9433 DESCRIPTION:
9434 The function sends 'Voice/Async Initiate USSD Request' (0x0043)
9435 and returns the response
9436
9437 PARAMETERS:
9438 handle [ I ] - Gobi interface handle
9439 to [ I ] - Timeout for transaction (in milliseconds)
9440 inLen [ I ] - Length of input buffer
9441 pIn [ I ] - Input buffer
9442 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9443 contain, upon output the number of BYTEs copied
9444 to pOut
9445 pOut [ O ] - Output buffer
9446
9447 RETURN VALUE:
9448 ULONG - Return code
9449 ===========================================================================*/
9450 ULONG VoiceAsyncInitiateUSSD(
9451 GOBIHANDLE handle,
9452 ULONG to,
9453 ULONG inLen,
9454 const BYTE * pIn,
9455 ULONG * pOutLen,
9456 BYTE * pOut );
9457
9458 /*===========================================================================
9459 METHOD:
9460 VoiceBindSubscription
9461
9462 DESCRIPTION:
9463 The function sends 'Voice/Bind Subscription Request' (0x0044)
9464 and returns the response
9465
9466 PARAMETERS:
9467 handle [ I ] - Gobi interface handle
9468 to [ I ] - Timeout for transaction (in milliseconds)
9469 inLen [ I ] - Length of input buffer
9470 pIn [ I ] - Input buffer
9471 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9472 contain, upon output the number of BYTEs copied
9473 to pOut
9474 pOut [ O ] - Output buffer
9475
9476 RETURN VALUE:
9477 ULONG - Return code
9478 ===========================================================================*/
9479 ULONG VoiceBindSubscription(
9480 GOBIHANDLE handle,
9481 ULONG to,
9482 ULONG inLen,
9483 const BYTE * pIn,
9484 ULONG * pOutLen,
9485 BYTE * pOut );
9486
9487 /*===========================================================================
9488 METHOD:
9489 VoiceALSSetLineSwitching
9490
9491 DESCRIPTION:
9492 The function sends 'Voice/ALS Set Line Switching Request' (0x0045)
9493 and returns the response
9494
9495 PARAMETERS:
9496 handle [ I ] - Gobi interface handle
9497 to [ I ] - Timeout for transaction (in milliseconds)
9498 inLen [ I ] - Length of input buffer
9499 pIn [ I ] - Input buffer
9500 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9501 contain, upon output the number of BYTEs copied
9502 to pOut
9503 pOut [ O ] - Output buffer
9504
9505 RETURN VALUE:
9506 ULONG - Return code
9507 ===========================================================================*/
9508 ULONG VoiceALSSetLineSwitching(
9509 GOBIHANDLE handle,
9510 ULONG to,
9511 ULONG inLen,
9512 const BYTE * pIn,
9513 ULONG * pOutLen,
9514 BYTE * pOut );
9515
9516 /*===========================================================================
9517 METHOD:
9518 VoiceALSSelectLine
9519
9520 DESCRIPTION:
9521 The function sends 'Voice/ALS Select Line Request' (0x0046)
9522 and returns the response
9523
9524 PARAMETERS:
9525 handle [ I ] - Gobi interface handle
9526 to [ I ] - Timeout for transaction (in milliseconds)
9527 inLen [ I ] - Length of input buffer
9528 pIn [ I ] - Input buffer
9529 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9530 contain, upon output the number of BYTEs copied
9531 to pOut
9532 pOut [ O ] - Output buffer
9533
9534 RETURN VALUE:
9535 ULONG - Return code
9536 ===========================================================================*/
9537 ULONG VoiceALSSelectLine(
9538 GOBIHANDLE handle,
9539 ULONG to,
9540 ULONG inLen,
9541 const BYTE * pIn,
9542 ULONG * pOutLen,
9543 BYTE * pOut );
9544
9545 /*===========================================================================
9546 METHOD:
9547 VoiceAOCResetACM
9548
9549 DESCRIPTION:
9550 The function sends 'Voice/AOC Reset ACM Request' (0x0047)
9551 and returns the response
9552
9553 PARAMETERS:
9554 handle [ I ] - Gobi interface handle
9555 to [ I ] - Timeout for transaction (in milliseconds)
9556 inLen [ I ] - Reserved for future use (set to 0)
9557 pIn [ I ] - Reserved for future use (set to 0)
9558 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9559 contain, upon output the number of BYTEs copied
9560 to pOut
9561 pOut [ O ] - Output buffer
9562
9563 RETURN VALUE:
9564 ULONG - Return code
9565 ===========================================================================*/
9566 ULONG VoiceAOCResetACM(
9567 GOBIHANDLE handle,
9568 ULONG to,
9569 ULONG inLen,
9570 const BYTE * pIn,
9571 ULONG * pOutLen,
9572 BYTE * pOut );
9573
9574 /*===========================================================================
9575 METHOD:
9576 VoiceAOCSetACMMaximum
9577
9578 DESCRIPTION:
9579 The function sends 'Voice/AOC Set ACM Maximum Request' (0x0048)
9580 and returns the response
9581
9582 PARAMETERS:
9583 handle [ I ] - Gobi interface handle
9584 to [ I ] - Timeout for transaction (in milliseconds)
9585 inLen [ I ] - Length of input buffer
9586 pIn [ I ] - Input buffer
9587 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9588 contain, upon output the number of BYTEs copied
9589 to pOut
9590 pOut [ O ] - Output buffer
9591
9592 RETURN VALUE:
9593 ULONG - Return code
9594 ===========================================================================*/
9595 ULONG VoiceAOCSetACMMaximum(
9596 GOBIHANDLE handle,
9597 ULONG to,
9598 ULONG inLen,
9599 const BYTE * pIn,
9600 ULONG * pOutLen,
9601 BYTE * pOut );
9602
9603 /*===========================================================================
9604 METHOD:
9605 VoiceAOCGetCallMeterInfo
9606
9607 DESCRIPTION:
9608 The function sends 'Voice/AOC Get Call Meter Info Request' (0x0049)
9609 and returns the response
9610
9611 PARAMETERS:
9612 handle [ I ] - Gobi interface handle
9613 to [ I ] - Timeout for transaction (in milliseconds)
9614 inLen [ I ] - Length of input buffer
9615 pIn [ I ] - Input buffer
9616 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9617 contain, upon output the number of BYTEs copied
9618 to pOut
9619 pOut [ O ] - Output buffer
9620
9621 RETURN VALUE:
9622 ULONG - Return code
9623 ===========================================================================*/
9624 ULONG VoiceAOCGetCallMeterInfo(
9625 GOBIHANDLE handle,
9626 ULONG to,
9627 ULONG inLen,
9628 const BYTE * pIn,
9629 ULONG * pOutLen,
9630 BYTE * pOut );
9631
9632 /*===========================================================================
9633 METHOD:
9634 VoiceGetCOLP
9635
9636 DESCRIPTION:
9637 The function sends 'Voice/Get COLP Request' (0x004B)
9638 and returns the response
9639
9640 PARAMETERS:
9641 handle [ I ] - Gobi interface handle
9642 to [ I ] - Timeout for transaction (in milliseconds)
9643 inLen [ I ] - Reserved for future use (set to 0)
9644 pIn [ I ] - Reserved for future use (set to 0)
9645 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9646 contain, upon output the number of BYTEs copied
9647 to pOut
9648 pOut [ O ] - Output buffer
9649
9650 RETURN VALUE:
9651 ULONG - Return code
9652 ===========================================================================*/
9653 ULONG VoiceGetCOLP(
9654 GOBIHANDLE handle,
9655 ULONG to,
9656 ULONG inLen,
9657 const BYTE * pIn,
9658 ULONG * pOutLen,
9659 BYTE * pOut );
9660
9661 /*===========================================================================
9662 METHOD:
9663 VoiceGetCOLR
9664
9665 DESCRIPTION:
9666 The function sends 'Voice/Get COLR Request' (0x004C)
9667 and returns the response
9668
9669 PARAMETERS:
9670 handle [ I ] - Gobi interface handle
9671 to [ I ] - Timeout for transaction (in milliseconds)
9672 inLen [ I ] - Reserved for future use (set to 0)
9673 pIn [ I ] - Reserved for future use (set to 0)
9674 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9675 contain, upon output the number of BYTEs copied
9676 to pOut
9677 pOut [ O ] - Output buffer
9678
9679 RETURN VALUE:
9680 ULONG - Return code
9681 ===========================================================================*/
9682 ULONG VoiceGetCOLR(
9683 GOBIHANDLE handle,
9684 ULONG to,
9685 ULONG inLen,
9686 const BYTE * pIn,
9687 ULONG * pOutLen,
9688 BYTE * pOut );
9689
9690 /*===========================================================================
9691 METHOD:
9692 VoiceGetCNAP
9693
9694 DESCRIPTION:
9695 The function sends 'Voice/Get CNAP Request' (0x004D)
9696 and returns the response
9697
9698 PARAMETERS:
9699 handle [ I ] - Gobi interface handle
9700 to [ I ] - Timeout for transaction (in milliseconds)
9701 inLen [ I ] - Reserved for future use (set to 0)
9702 pIn [ I ] - Reserved for future use (set to 0)
9703 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9704 contain, upon output the number of BYTEs copied
9705 to pOut
9706 pOut [ O ] - Output buffer
9707
9708 RETURN VALUE:
9709 ULONG - Return code
9710 ===========================================================================*/
9711 ULONG VoiceGetCNAP(
9712 GOBIHANDLE handle,
9713 ULONG to,
9714 ULONG inLen,
9715 const BYTE * pIn,
9716 ULONG * pOutLen,
9717 BYTE * pOut );
9718
9719 /*===========================================================================
9720 METHOD:
9721 VoiceManageIPCalls
9722
9723 DESCRIPTION:
9724 The function sends 'Voice/Manage IP Calls Request' (0x004E)
9725 and returns the response
9726
9727 PARAMETERS:
9728 handle [ I ] - Gobi interface handle
9729 to [ I ] - Timeout for transaction (in milliseconds)
9730 inLen [ I ] - Length of input buffer
9731 pIn [ I ] - Input buffer
9732 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9733 contain, upon output the number of BYTEs copied
9734 to pOut
9735 pOut [ O ] - Output buffer
9736
9737 RETURN VALUE:
9738 ULONG - Return code
9739 ===========================================================================*/
9740 ULONG VoiceManageIPCalls(
9741 GOBIHANDLE handle,
9742 ULONG to,
9743 ULONG inLen,
9744 const BYTE * pIn,
9745 ULONG * pOutLen,
9746 BYTE * pOut );
9747
9748 /*===========================================================================
9749 METHOD:
9750 CAT2Reset
9751
9752 DESCRIPTION:
9753 The function sends 'CAT2/Reset Request' (0x0000)
9754 and returns the response
9755
9756 PARAMETERS:
9757 handle [ I ] - Gobi interface handle
9758 to [ I ] - Timeout for transaction (in milliseconds)
9759 inLen [ I ] - Reserved for future use (set to 0)
9760 pIn [ I ] - Reserved for future use (set to 0)
9761 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9762 contain, upon output the number of BYTEs copied
9763 to pOut
9764 pOut [ O ] - Output buffer
9765
9766 RETURN VALUE:
9767 ULONG - Return code
9768 ===========================================================================*/
9769 ULONG CAT2Reset(
9770 GOBIHANDLE handle,
9771 ULONG to,
9772 ULONG inLen,
9773 const BYTE * pIn,
9774 ULONG * pOutLen,
9775 BYTE * pOut );
9776
9777 /*===========================================================================
9778 METHOD:
9779 CAT2SetEventReport
9780
9781 DESCRIPTION:
9782 The function sends 'CAT2/Set Event Report Request' (0x0001)
9783 and returns the response
9784
9785 PARAMETERS:
9786 handle [ I ] - Gobi interface handle
9787 to [ I ] - Timeout for transaction (in milliseconds)
9788 inLen [ I ] - Length of input buffer
9789 pIn [ I ] - Input buffer
9790 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9791 contain, upon output the number of BYTEs copied
9792 to pOut
9793 pOut [ O ] - Output buffer
9794
9795 RETURN VALUE:
9796 ULONG - Return code
9797 ===========================================================================*/
9798 ULONG CAT2SetEventReport(
9799 GOBIHANDLE handle,
9800 ULONG to,
9801 ULONG inLen,
9802 const BYTE * pIn,
9803 ULONG * pOutLen,
9804 BYTE * pOut );
9805
9806 /*===========================================================================
9807 METHOD:
9808 CAT2GetServiceState
9809
9810 DESCRIPTION:
9811 The function sends 'CAT2/Get Service State Request' (0x0020)
9812 and returns the response
9813
9814 PARAMETERS:
9815 handle [ I ] - Gobi interface handle
9816 to [ I ] - Timeout for transaction (in milliseconds)
9817 inLen [ I ] - Reserved for future use (set to 0)
9818 pIn [ I ] - Reserved for future use (set to 0)
9819 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9820 contain, upon output the number of BYTEs copied
9821 to pOut
9822 pOut [ O ] - Output buffer
9823
9824 RETURN VALUE:
9825 ULONG - Return code
9826 ===========================================================================*/
9827 ULONG CAT2GetServiceState(
9828 GOBIHANDLE handle,
9829 ULONG to,
9830 ULONG inLen,
9831 const BYTE * pIn,
9832 ULONG * pOutLen,
9833 BYTE * pOut );
9834
9835 /*===========================================================================
9836 METHOD:
9837 CAT2SendTerminalResponse
9838
9839 DESCRIPTION:
9840 The function sends 'CAT2/Send Terminal Response Request' (0x0021)
9841 and returns the response
9842
9843 PARAMETERS:
9844 handle [ I ] - Gobi interface handle
9845 to [ I ] - Timeout for transaction (in milliseconds)
9846 inLen [ I ] - Length of input buffer
9847 pIn [ I ] - Input buffer
9848 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9849 contain, upon output the number of BYTEs copied
9850 to pOut
9851 pOut [ O ] - Output buffer
9852
9853 RETURN VALUE:
9854 ULONG - Return code
9855 ===========================================================================*/
9856 ULONG CAT2SendTerminalResponse(
9857 GOBIHANDLE handle,
9858 ULONG to,
9859 ULONG inLen,
9860 const BYTE * pIn,
9861 ULONG * pOutLen,
9862 BYTE * pOut );
9863
9864 /*===========================================================================
9865 METHOD:
9866 CAT2EnvelopeCommand
9867
9868 DESCRIPTION:
9869 The function sends 'CAT2/Envelope Command Request' (0x0022)
9870 and returns the response
9871
9872 PARAMETERS:
9873 handle [ I ] - Gobi interface handle
9874 to [ I ] - Timeout for transaction (in milliseconds)
9875 inLen [ I ] - Length of input buffer
9876 pIn [ I ] - Input buffer
9877 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9878 contain, upon output the number of BYTEs copied
9879 to pOut
9880 pOut [ O ] - Output buffer
9881
9882 RETURN VALUE:
9883 ULONG - Return code
9884 ===========================================================================*/
9885 ULONG CAT2EnvelopeCommand(
9886 GOBIHANDLE handle,
9887 ULONG to,
9888 ULONG inLen,
9889 const BYTE * pIn,
9890 ULONG * pOutLen,
9891 BYTE * pOut );
9892
9893 /*===========================================================================
9894 METHOD:
9895 CAT2GetEventReport
9896
9897 DESCRIPTION:
9898 The function sends 'CAT2/Get Event Report Request' (0x0023)
9899 and returns the response
9900
9901 PARAMETERS:
9902 handle [ I ] - Gobi interface handle
9903 to [ I ] - Timeout for transaction (in milliseconds)
9904 inLen [ I ] - Length of input buffer
9905 pIn [ I ] - Input buffer
9906 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9907 contain, upon output the number of BYTEs copied
9908 to pOut
9909 pOut [ O ] - Output buffer
9910
9911 RETURN VALUE:
9912 ULONG - Return code
9913 ===========================================================================*/
9914 ULONG CAT2GetEventReport(
9915 GOBIHANDLE handle,
9916 ULONG to,
9917 ULONG inLen,
9918 const BYTE * pIn,
9919 ULONG * pOutLen,
9920 BYTE * pOut );
9921
9922 /*===========================================================================
9923 METHOD:
9924 CAT2SendDecodedTerminalResponse
9925
9926 DESCRIPTION:
9927 The function sends 'CAT2/Send Decoded Terminal Response Request' (0x0024)
9928 and returns the response
9929
9930 PARAMETERS:
9931 handle [ I ] - Gobi interface handle
9932 to [ I ] - Timeout for transaction (in milliseconds)
9933 inLen [ I ] - Length of input buffer
9934 pIn [ I ] - Input buffer
9935 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9936 contain, upon output the number of BYTEs copied
9937 to pOut
9938 pOut [ O ] - Output buffer
9939
9940 RETURN VALUE:
9941 ULONG - Return code
9942 ===========================================================================*/
9943 ULONG CAT2SendDecodedTerminalResponse(
9944 GOBIHANDLE handle,
9945 ULONG to,
9946 ULONG inLen,
9947 const BYTE * pIn,
9948 ULONG * pOutLen,
9949 BYTE * pOut );
9950
9951 /*===========================================================================
9952 METHOD:
9953 CAT2SendDecodedEnvelopeCommand
9954
9955 DESCRIPTION:
9956 The function sends 'CAT2/Send Decoded Envelope Command Request' (0x0025)
9957 and returns the response
9958
9959 PARAMETERS:
9960 handle [ I ] - Gobi interface handle
9961 to [ I ] - Timeout for transaction (in milliseconds)
9962 inLen [ I ] - Length of input buffer
9963 pIn [ I ] - Input buffer
9964 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9965 contain, upon output the number of BYTEs copied
9966 to pOut
9967 pOut [ O ] - Output buffer
9968
9969 RETURN VALUE:
9970 ULONG - Return code
9971 ===========================================================================*/
9972 ULONG CAT2SendDecodedEnvelopeCommand(
9973 GOBIHANDLE handle,
9974 ULONG to,
9975 ULONG inLen,
9976 const BYTE * pIn,
9977 ULONG * pOutLen,
9978 BYTE * pOut );
9979
9980 /*===========================================================================
9981 METHOD:
9982 CAT2EventConfirmation
9983
9984 DESCRIPTION:
9985 The function sends 'CAT2/Event Confirmation Request' (0x0026)
9986 and returns the response
9987
9988 PARAMETERS:
9989 handle [ I ] - Gobi interface handle
9990 to [ I ] - Timeout for transaction (in milliseconds)
9991 inLen [ I ] - Length of input buffer
9992 pIn [ I ] - Input buffer
9993 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
9994 contain, upon output the number of BYTEs copied
9995 to pOut
9996 pOut [ O ] - Output buffer
9997
9998 RETURN VALUE:
9999 ULONG - Return code
10000 ===========================================================================*/
10001 ULONG CAT2EventConfirmation(
10002 GOBIHANDLE handle,
10003 ULONG to,
10004 ULONG inLen,
10005 const BYTE * pIn,
10006 ULONG * pOutLen,
10007 BYTE * pOut );
10008
10009 /*===========================================================================
10010 METHOD:
10011 CAT2SCWSOpenChannel
10012
10013 DESCRIPTION:
10014 The function sends 'CAT2/SCWS Open Channel Request' (0x0027)
10015 and returns the response
10016
10017 PARAMETERS:
10018 handle [ I ] - Gobi interface handle
10019 to [ I ] - Timeout for transaction (in milliseconds)
10020 inLen [ I ] - Length of input buffer
10021 pIn [ I ] - Input buffer
10022 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10023 contain, upon output the number of BYTEs copied
10024 to pOut
10025 pOut [ O ] - Output buffer
10026
10027 RETURN VALUE:
10028 ULONG - Return code
10029 ===========================================================================*/
10030 ULONG CAT2SCWSOpenChannel(
10031 GOBIHANDLE handle,
10032 ULONG to,
10033 ULONG inLen,
10034 const BYTE * pIn,
10035 ULONG * pOutLen,
10036 BYTE * pOut );
10037
10038 /*===========================================================================
10039 METHOD:
10040 CAT2SCWSCloseChannel
10041
10042 DESCRIPTION:
10043 The function sends 'CAT2/SCWS Close Channel Request' (0x0028)
10044 and returns the response
10045
10046 PARAMETERS:
10047 handle [ I ] - Gobi interface handle
10048 to [ I ] - Timeout for transaction (in milliseconds)
10049 inLen [ I ] - Length of input buffer
10050 pIn [ I ] - Input buffer
10051 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10052 contain, upon output the number of BYTEs copied
10053 to pOut
10054 pOut [ O ] - Output buffer
10055
10056 RETURN VALUE:
10057 ULONG - Return code
10058 ===========================================================================*/
10059 ULONG CAT2SCWSCloseChannel(
10060 GOBIHANDLE handle,
10061 ULONG to,
10062 ULONG inLen,
10063 const BYTE * pIn,
10064 ULONG * pOutLen,
10065 BYTE * pOut );
10066
10067 /*===========================================================================
10068 METHOD:
10069 CAT2SCWSSendData
10070
10071 DESCRIPTION:
10072 The function sends 'CAT2/SCWS Send Data Request' (0x0029)
10073 and returns the response
10074
10075 PARAMETERS:
10076 handle [ I ] - Gobi interface handle
10077 to [ I ] - Timeout for transaction (in milliseconds)
10078 inLen [ I ] - Length of input buffer
10079 pIn [ I ] - Input buffer
10080 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10081 contain, upon output the number of BYTEs copied
10082 to pOut
10083 pOut [ O ] - Output buffer
10084
10085 RETURN VALUE:
10086 ULONG - Return code
10087 ===========================================================================*/
10088 ULONG CAT2SCWSSendData(
10089 GOBIHANDLE handle,
10090 ULONG to,
10091 ULONG inLen,
10092 const BYTE * pIn,
10093 ULONG * pOutLen,
10094 BYTE * pOut );
10095
10096 /*===========================================================================
10097 METHOD:
10098 CAT2SCWSDataAvailable
10099
10100 DESCRIPTION:
10101 The function sends 'CAT2/SCWS Data Available Request' (0x002A)
10102 and returns the response
10103
10104 PARAMETERS:
10105 handle [ I ] - Gobi interface handle
10106 to [ I ] - Timeout for transaction (in milliseconds)
10107 inLen [ I ] - Length of input buffer
10108 pIn [ I ] - Input buffer
10109 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10110 contain, upon output the number of BYTEs copied
10111 to pOut
10112 pOut [ O ] - Output buffer
10113
10114 RETURN VALUE:
10115 ULONG - Return code
10116 ===========================================================================*/
10117 ULONG CAT2SCWSDataAvailable(
10118 GOBIHANDLE handle,
10119 ULONG to,
10120 ULONG inLen,
10121 const BYTE * pIn,
10122 ULONG * pOutLen,
10123 BYTE * pOut );
10124
10125 /*===========================================================================
10126 METHOD:
10127 CAT2SCWSChannelStatus
10128
10129 DESCRIPTION:
10130 The function sends 'CAT2/SCWS Channel Status Request' (0x002B)
10131 and returns the response
10132
10133 PARAMETERS:
10134 handle [ I ] - Gobi interface handle
10135 to [ I ] - Timeout for transaction (in milliseconds)
10136 inLen [ I ] - Length of input buffer
10137 pIn [ I ] - Input buffer
10138 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10139 contain, upon output the number of BYTEs copied
10140 to pOut
10141 pOut [ O ] - Output buffer
10142
10143 RETURN VALUE:
10144 ULONG - Return code
10145 ===========================================================================*/
10146 ULONG CAT2SCWSChannelStatus(
10147 GOBIHANDLE handle,
10148 ULONG to,
10149 ULONG inLen,
10150 const BYTE * pIn,
10151 ULONG * pOutLen,
10152 BYTE * pOut );
10153
10154 /*===========================================================================
10155 METHOD:
10156 CAT2GetTerminalProfile
10157
10158 DESCRIPTION:
10159 The function sends 'CAT2/Get Terminal Profile Request' (0x002C)
10160 and returns the response
10161
10162 PARAMETERS:
10163 handle [ I ] - Gobi interface handle
10164 to [ I ] - Timeout for transaction (in milliseconds)
10165 inLen [ I ] - Length of input buffer
10166 pIn [ I ] - Input buffer
10167 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10168 contain, upon output the number of BYTEs copied
10169 to pOut
10170 pOut [ O ] - Output buffer
10171
10172 RETURN VALUE:
10173 ULONG - Return code
10174 ===========================================================================*/
10175 ULONG CAT2GetTerminalProfile(
10176 GOBIHANDLE handle,
10177 ULONG to,
10178 ULONG inLen,
10179 const BYTE * pIn,
10180 ULONG * pOutLen,
10181 BYTE * pOut );
10182
10183 /*===========================================================================
10184 METHOD:
10185 CAT2SetConfiguration
10186
10187 DESCRIPTION:
10188 The function sends 'CAT2/Set Configuration Request' (0x002D)
10189 and returns the response
10190
10191 PARAMETERS:
10192 handle [ I ] - Gobi interface handle
10193 to [ I ] - Timeout for transaction (in milliseconds)
10194 inLen [ I ] - Length of input buffer
10195 pIn [ I ] - Input buffer
10196 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10197 contain, upon output the number of BYTEs copied
10198 to pOut
10199 pOut [ O ] - Output buffer
10200
10201 RETURN VALUE:
10202 ULONG - Return code
10203 ===========================================================================*/
10204 ULONG CAT2SetConfiguration(
10205 GOBIHANDLE handle,
10206 ULONG to,
10207 ULONG inLen,
10208 const BYTE * pIn,
10209 ULONG * pOutLen,
10210 BYTE * pOut );
10211
10212 /*===========================================================================
10213 METHOD:
10214 CAT2GetConfiguration
10215
10216 DESCRIPTION:
10217 The function sends 'CAT2/Get Configuration Request' (0x002E)
10218 and returns the response
10219
10220 PARAMETERS:
10221 handle [ I ] - Gobi interface handle
10222 to [ I ] - Timeout for transaction (in milliseconds)
10223 inLen [ I ] - Reserved for future use (set to 0)
10224 pIn [ I ] - Reserved for future use (set to 0)
10225 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10226 contain, upon output the number of BYTEs copied
10227 to pOut
10228 pOut [ O ] - Output buffer
10229
10230 RETURN VALUE:
10231 ULONG - Return code
10232 ===========================================================================*/
10233 ULONG CAT2GetConfiguration(
10234 GOBIHANDLE handle,
10235 ULONG to,
10236 ULONG inLen,
10237 const BYTE * pIn,
10238 ULONG * pOutLen,
10239 BYTE * pOut );
10240
10241 /*===========================================================================
10242 METHOD:
10243 UIMReset
10244
10245 DESCRIPTION:
10246 The function sends 'UIM/Reset Request' (0x0000)
10247 and returns the response
10248
10249 PARAMETERS:
10250 handle [ I ] - Gobi interface handle
10251 to [ I ] - Timeout for transaction (in milliseconds)
10252 inLen [ I ] - Reserved for future use (set to 0)
10253 pIn [ I ] - Reserved for future use (set to 0)
10254 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10255 contain, upon output the number of BYTEs copied
10256 to pOut
10257 pOut [ O ] - Output buffer
10258
10259 RETURN VALUE:
10260 ULONG - Return code
10261 ===========================================================================*/
10262 ULONG UIMReset(
10263 GOBIHANDLE handle,
10264 ULONG to,
10265 ULONG inLen,
10266 const BYTE * pIn,
10267 ULONG * pOutLen,
10268 BYTE * pOut );
10269
10270 /*===========================================================================
10271 METHOD:
10272 UIMReadTransparent
10273
10274 DESCRIPTION:
10275 The function sends 'UIM/Read Transparent Request' (0x0020)
10276 and returns the response
10277
10278 PARAMETERS:
10279 handle [ I ] - Gobi interface handle
10280 to [ I ] - Timeout for transaction (in milliseconds)
10281 inLen [ I ] - Length of input buffer
10282 pIn [ I ] - Input buffer
10283 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10284 contain, upon output the number of BYTEs copied
10285 to pOut
10286 pOut [ O ] - Output buffer
10287
10288 RETURN VALUE:
10289 ULONG - Return code
10290 ===========================================================================*/
10291 ULONG UIMReadTransparent(
10292 GOBIHANDLE handle,
10293 ULONG to,
10294 ULONG inLen,
10295 const BYTE * pIn,
10296 ULONG * pOutLen,
10297 BYTE * pOut );
10298
10299 /*===========================================================================
10300 METHOD:
10301 UIMReadRecord
10302
10303 DESCRIPTION:
10304 The function sends 'UIM/Read Record Request' (0x0021)
10305 and returns the response
10306
10307 PARAMETERS:
10308 handle [ I ] - Gobi interface handle
10309 to [ I ] - Timeout for transaction (in milliseconds)
10310 inLen [ I ] - Length of input buffer
10311 pIn [ I ] - Input buffer
10312 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10313 contain, upon output the number of BYTEs copied
10314 to pOut
10315 pOut [ O ] - Output buffer
10316
10317 RETURN VALUE:
10318 ULONG - Return code
10319 ===========================================================================*/
10320 ULONG UIMReadRecord(
10321 GOBIHANDLE handle,
10322 ULONG to,
10323 ULONG inLen,
10324 const BYTE * pIn,
10325 ULONG * pOutLen,
10326 BYTE * pOut );
10327
10328 /*===========================================================================
10329 METHOD:
10330 UIMWriteTransparent
10331
10332 DESCRIPTION:
10333 The function sends 'UIM/Write Transparent Request' (0x0022)
10334 and returns the response
10335
10336 PARAMETERS:
10337 handle [ I ] - Gobi interface handle
10338 to [ I ] - Timeout for transaction (in milliseconds)
10339 inLen [ I ] - Length of input buffer
10340 pIn [ I ] - Input buffer
10341 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10342 contain, upon output the number of BYTEs copied
10343 to pOut
10344 pOut [ O ] - Output buffer
10345
10346 RETURN VALUE:
10347 ULONG - Return code
10348 ===========================================================================*/
10349 ULONG UIMWriteTransparent(
10350 GOBIHANDLE handle,
10351 ULONG to,
10352 ULONG inLen,
10353 const BYTE * pIn,
10354 ULONG * pOutLen,
10355 BYTE * pOut );
10356
10357 /*===========================================================================
10358 METHOD:
10359 UIMWriteRecord
10360
10361 DESCRIPTION:
10362 The function sends 'UIM/Write Record Request' (0x0023)
10363 and returns the response
10364
10365 PARAMETERS:
10366 handle [ I ] - Gobi interface handle
10367 to [ I ] - Timeout for transaction (in milliseconds)
10368 inLen [ I ] - Length of input buffer
10369 pIn [ I ] - Input buffer
10370 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10371 contain, upon output the number of BYTEs copied
10372 to pOut
10373 pOut [ O ] - Output buffer
10374
10375 RETURN VALUE:
10376 ULONG - Return code
10377 ===========================================================================*/
10378 ULONG UIMWriteRecord(
10379 GOBIHANDLE handle,
10380 ULONG to,
10381 ULONG inLen,
10382 const BYTE * pIn,
10383 ULONG * pOutLen,
10384 BYTE * pOut );
10385
10386 /*===========================================================================
10387 METHOD:
10388 UIMGetFileAttributes
10389
10390 DESCRIPTION:
10391 The function sends 'UIM/Get File Attributes Request' (0x0024)
10392 and returns the response
10393
10394 PARAMETERS:
10395 handle [ I ] - Gobi interface handle
10396 to [ I ] - Timeout for transaction (in milliseconds)
10397 inLen [ I ] - Length of input buffer
10398 pIn [ I ] - Input buffer
10399 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10400 contain, upon output the number of BYTEs copied
10401 to pOut
10402 pOut [ O ] - Output buffer
10403
10404 RETURN VALUE:
10405 ULONG - Return code
10406 ===========================================================================*/
10407 ULONG UIMGetFileAttributes(
10408 GOBIHANDLE handle,
10409 ULONG to,
10410 ULONG inLen,
10411 const BYTE * pIn,
10412 ULONG * pOutLen,
10413 BYTE * pOut );
10414
10415 /*===========================================================================
10416 METHOD:
10417 UIMSetPINProtection
10418
10419 DESCRIPTION:
10420 The function sends 'UIM/Set PIN Protection Request' (0x0025)
10421 and returns the response
10422
10423 PARAMETERS:
10424 handle [ I ] - Gobi interface handle
10425 to [ I ] - Timeout for transaction (in milliseconds)
10426 inLen [ I ] - Length of input buffer
10427 pIn [ I ] - Input buffer
10428 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10429 contain, upon output the number of BYTEs copied
10430 to pOut
10431 pOut [ O ] - Output buffer
10432
10433 RETURN VALUE:
10434 ULONG - Return code
10435 ===========================================================================*/
10436 ULONG UIMSetPINProtection(
10437 GOBIHANDLE handle,
10438 ULONG to,
10439 ULONG inLen,
10440 const BYTE * pIn,
10441 ULONG * pOutLen,
10442 BYTE * pOut );
10443
10444 /*===========================================================================
10445 METHOD:
10446 UIMVerifyPIN
10447
10448 DESCRIPTION:
10449 The function sends 'UIM/Verify PIN Request' (0x0026)
10450 and returns the response
10451
10452 PARAMETERS:
10453 handle [ I ] - Gobi interface handle
10454 to [ I ] - Timeout for transaction (in milliseconds)
10455 inLen [ I ] - Length of input buffer
10456 pIn [ I ] - Input buffer
10457 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10458 contain, upon output the number of BYTEs copied
10459 to pOut
10460 pOut [ O ] - Output buffer
10461
10462 RETURN VALUE:
10463 ULONG - Return code
10464 ===========================================================================*/
10465 ULONG UIMVerifyPIN(
10466 GOBIHANDLE handle,
10467 ULONG to,
10468 ULONG inLen,
10469 const BYTE * pIn,
10470 ULONG * pOutLen,
10471 BYTE * pOut );
10472
10473 /*===========================================================================
10474 METHOD:
10475 UIMUnblockPIN
10476
10477 DESCRIPTION:
10478 The function sends 'UIM/Unblock PIN Request' (0x0027)
10479 and returns the response
10480
10481 PARAMETERS:
10482 handle [ I ] - Gobi interface handle
10483 to [ I ] - Timeout for transaction (in milliseconds)
10484 inLen [ I ] - Length of input buffer
10485 pIn [ I ] - Input buffer
10486 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10487 contain, upon output the number of BYTEs copied
10488 to pOut
10489 pOut [ O ] - Output buffer
10490
10491 RETURN VALUE:
10492 ULONG - Return code
10493 ===========================================================================*/
10494 ULONG UIMUnblockPIN(
10495 GOBIHANDLE handle,
10496 ULONG to,
10497 ULONG inLen,
10498 const BYTE * pIn,
10499 ULONG * pOutLen,
10500 BYTE * pOut );
10501
10502 /*===========================================================================
10503 METHOD:
10504 UIMChangePIN
10505
10506 DESCRIPTION:
10507 The function sends 'UIM/Change PIN Request' (0x0028)
10508 and returns the response
10509
10510 PARAMETERS:
10511 handle [ I ] - Gobi interface handle
10512 to [ I ] - Timeout for transaction (in milliseconds)
10513 inLen [ I ] - Length of input buffer
10514 pIn [ I ] - Input buffer
10515 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10516 contain, upon output the number of BYTEs copied
10517 to pOut
10518 pOut [ O ] - Output buffer
10519
10520 RETURN VALUE:
10521 ULONG - Return code
10522 ===========================================================================*/
10523 ULONG UIMChangePIN(
10524 GOBIHANDLE handle,
10525 ULONG to,
10526 ULONG inLen,
10527 const BYTE * pIn,
10528 ULONG * pOutLen,
10529 BYTE * pOut );
10530
10531 /*===========================================================================
10532 METHOD:
10533 UIMDepersonalization
10534
10535 DESCRIPTION:
10536 The function sends 'UIM/Depersonalization Request' (0x0029)
10537 and returns the response
10538
10539 PARAMETERS:
10540 handle [ I ] - Gobi interface handle
10541 to [ I ] - Timeout for transaction (in milliseconds)
10542 inLen [ I ] - Length of input buffer
10543 pIn [ I ] - Input buffer
10544 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10545 contain, upon output the number of BYTEs copied
10546 to pOut
10547 pOut [ O ] - Output buffer
10548
10549 RETURN VALUE:
10550 ULONG - Return code
10551 ===========================================================================*/
10552 ULONG UIMDepersonalization(
10553 GOBIHANDLE handle,
10554 ULONG to,
10555 ULONG inLen,
10556 const BYTE * pIn,
10557 ULONG * pOutLen,
10558 BYTE * pOut );
10559
10560 /*===========================================================================
10561 METHOD:
10562 UIMRefreshRegister
10563
10564 DESCRIPTION:
10565 The function sends 'UIM/Refresh Register Request' (0x002A)
10566 and returns the response
10567
10568 PARAMETERS:
10569 handle [ I ] - Gobi interface handle
10570 to [ I ] - Timeout for transaction (in milliseconds)
10571 inLen [ I ] - Length of input buffer
10572 pIn [ I ] - Input buffer
10573 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10574 contain, upon output the number of BYTEs copied
10575 to pOut
10576 pOut [ O ] - Output buffer
10577
10578 RETURN VALUE:
10579 ULONG - Return code
10580 ===========================================================================*/
10581 ULONG UIMRefreshRegister(
10582 GOBIHANDLE handle,
10583 ULONG to,
10584 ULONG inLen,
10585 const BYTE * pIn,
10586 ULONG * pOutLen,
10587 BYTE * pOut );
10588
10589 /*===========================================================================
10590 METHOD:
10591 UIMRefreshOK
10592
10593 DESCRIPTION:
10594 The function sends 'UIM/Refresh OK Request' (0x002B)
10595 and returns the response
10596
10597 PARAMETERS:
10598 handle [ I ] - Gobi interface handle
10599 to [ I ] - Timeout for transaction (in milliseconds)
10600 inLen [ I ] - Length of input buffer
10601 pIn [ I ] - Input buffer
10602 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10603 contain, upon output the number of BYTEs copied
10604 to pOut
10605 pOut [ O ] - Output buffer
10606
10607 RETURN VALUE:
10608 ULONG - Return code
10609 ===========================================================================*/
10610 ULONG UIMRefreshOK(
10611 GOBIHANDLE handle,
10612 ULONG to,
10613 ULONG inLen,
10614 const BYTE * pIn,
10615 ULONG * pOutLen,
10616 BYTE * pOut );
10617
10618 /*===========================================================================
10619 METHOD:
10620 UIMRefreshComplete
10621
10622 DESCRIPTION:
10623 The function sends 'UIM/Refresh Complete Request' (0x002C)
10624 and returns the response
10625
10626 PARAMETERS:
10627 handle [ I ] - Gobi interface handle
10628 to [ I ] - Timeout for transaction (in milliseconds)
10629 inLen [ I ] - Length of input buffer
10630 pIn [ I ] - Input buffer
10631 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10632 contain, upon output the number of BYTEs copied
10633 to pOut
10634 pOut [ O ] - Output buffer
10635
10636 RETURN VALUE:
10637 ULONG - Return code
10638 ===========================================================================*/
10639 ULONG UIMRefreshComplete(
10640 GOBIHANDLE handle,
10641 ULONG to,
10642 ULONG inLen,
10643 const BYTE * pIn,
10644 ULONG * pOutLen,
10645 BYTE * pOut );
10646
10647 /*===========================================================================
10648 METHOD:
10649 UIMGetLastRefreshEvent
10650
10651 DESCRIPTION:
10652 The function sends 'UIM/Get Last Refresh Event Request' (0x002D)
10653 and returns the response
10654
10655 PARAMETERS:
10656 handle [ I ] - Gobi interface handle
10657 to [ I ] - Timeout for transaction (in milliseconds)
10658 inLen [ I ] - Length of input buffer
10659 pIn [ I ] - Input buffer
10660 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10661 contain, upon output the number of BYTEs copied
10662 to pOut
10663 pOut [ O ] - Output buffer
10664
10665 RETURN VALUE:
10666 ULONG - Return code
10667 ===========================================================================*/
10668 ULONG UIMGetLastRefreshEvent(
10669 GOBIHANDLE handle,
10670 ULONG to,
10671 ULONG inLen,
10672 const BYTE * pIn,
10673 ULONG * pOutLen,
10674 BYTE * pOut );
10675
10676 /*===========================================================================
10677 METHOD:
10678 UIMEventRegistration
10679
10680 DESCRIPTION:
10681 The function sends 'UIM/Event Registration Request' (0x002E)
10682 and returns the response
10683
10684 PARAMETERS:
10685 handle [ I ] - Gobi interface handle
10686 to [ I ] - Timeout for transaction (in milliseconds)
10687 inLen [ I ] - Length of input buffer
10688 pIn [ I ] - Input buffer
10689 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10690 contain, upon output the number of BYTEs copied
10691 to pOut
10692 pOut [ O ] - Output buffer
10693
10694 RETURN VALUE:
10695 ULONG - Return code
10696 ===========================================================================*/
10697 ULONG UIMEventRegistration(
10698 GOBIHANDLE handle,
10699 ULONG to,
10700 ULONG inLen,
10701 const BYTE * pIn,
10702 ULONG * pOutLen,
10703 BYTE * pOut );
10704
10705 /*===========================================================================
10706 METHOD:
10707 UIMGetCardStatus
10708
10709 DESCRIPTION:
10710 The function sends 'UIM/Get Card Status Request' (0x002F)
10711 and returns the response
10712
10713 PARAMETERS:
10714 handle [ I ] - Gobi interface handle
10715 to [ I ] - Timeout for transaction (in milliseconds)
10716 inLen [ I ] - Reserved for future use (set to 0)
10717 pIn [ I ] - Reserved for future use (set to 0)
10718 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10719 contain, upon output the number of BYTEs copied
10720 to pOut
10721 pOut [ O ] - Output buffer
10722
10723 RETURN VALUE:
10724 ULONG - Return code
10725 ===========================================================================*/
10726 ULONG UIMGetCardStatus(
10727 GOBIHANDLE handle,
10728 ULONG to,
10729 ULONG inLen,
10730 const BYTE * pIn,
10731 ULONG * pOutLen,
10732 BYTE * pOut );
10733
10734 /*===========================================================================
10735 METHOD:
10736 UIMPowerDown
10737
10738 DESCRIPTION:
10739 The function sends 'UIM/Power Down Request' (0x0030)
10740 and returns the response
10741
10742 PARAMETERS:
10743 handle [ I ] - Gobi interface handle
10744 to [ I ] - Timeout for transaction (in milliseconds)
10745 inLen [ I ] - Length of input buffer
10746 pIn [ I ] - Input buffer
10747 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10748 contain, upon output the number of BYTEs copied
10749 to pOut
10750 pOut [ O ] - Output buffer
10751
10752 RETURN VALUE:
10753 ULONG - Return code
10754 ===========================================================================*/
10755 ULONG UIMPowerDown(
10756 GOBIHANDLE handle,
10757 ULONG to,
10758 ULONG inLen,
10759 const BYTE * pIn,
10760 ULONG * pOutLen,
10761 BYTE * pOut );
10762
10763 /*===========================================================================
10764 METHOD:
10765 UIMPowerUp
10766
10767 DESCRIPTION:
10768 The function sends 'UIM/Power Up Request' (0x0031)
10769 and returns the response
10770
10771 PARAMETERS:
10772 handle [ I ] - Gobi interface handle
10773 to [ I ] - Timeout for transaction (in milliseconds)
10774 inLen [ I ] - Length of input buffer
10775 pIn [ I ] - Input buffer
10776 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10777 contain, upon output the number of BYTEs copied
10778 to pOut
10779 pOut [ O ] - Output buffer
10780
10781 RETURN VALUE:
10782 ULONG - Return code
10783 ===========================================================================*/
10784 ULONG UIMPowerUp(
10785 GOBIHANDLE handle,
10786 ULONG to,
10787 ULONG inLen,
10788 const BYTE * pIn,
10789 ULONG * pOutLen,
10790 BYTE * pOut );
10791
10792 /*===========================================================================
10793 METHOD:
10794 UIMAuthenticate
10795
10796 DESCRIPTION:
10797 The function sends 'UIM/Authenticate Request' (0x0034)
10798 and returns the response
10799
10800 PARAMETERS:
10801 handle [ I ] - Gobi interface handle
10802 to [ I ] - Timeout for transaction (in milliseconds)
10803 inLen [ I ] - Length of input buffer
10804 pIn [ I ] - Input buffer
10805 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10806 contain, upon output the number of BYTEs copied
10807 to pOut
10808 pOut [ O ] - Output buffer
10809
10810 RETURN VALUE:
10811 ULONG - Return code
10812 ===========================================================================*/
10813 ULONG UIMAuthenticate(
10814 GOBIHANDLE handle,
10815 ULONG to,
10816 ULONG inLen,
10817 const BYTE * pIn,
10818 ULONG * pOutLen,
10819 BYTE * pOut );
10820
10821 /*===========================================================================
10822 METHOD:
10823 UIMCloseSession
10824
10825 DESCRIPTION:
10826 The function sends 'UIM/Close Session Request' (0x0035)
10827 and returns the response
10828
10829 PARAMETERS:
10830 handle [ I ] - Gobi interface handle
10831 to [ I ] - Timeout for transaction (in milliseconds)
10832 inLen [ I ] - Length of input buffer
10833 pIn [ I ] - Input buffer
10834 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10835 contain, upon output the number of BYTEs copied
10836 to pOut
10837 pOut [ O ] - Output buffer
10838
10839 RETURN VALUE:
10840 ULONG - Return code
10841 ===========================================================================*/
10842 ULONG UIMCloseSession(
10843 GOBIHANDLE handle,
10844 ULONG to,
10845 ULONG inLen,
10846 const BYTE * pIn,
10847 ULONG * pOutLen,
10848 BYTE * pOut );
10849
10850 /*===========================================================================
10851 METHOD:
10852 UIMGetServiceStatus
10853
10854 DESCRIPTION:
10855 The function sends 'UIM/Get Service Status Request' (0x0036)
10856 and returns the response
10857
10858 PARAMETERS:
10859 handle [ I ] - Gobi interface handle
10860 to [ I ] - Timeout for transaction (in milliseconds)
10861 inLen [ I ] - Length of input buffer
10862 pIn [ I ] - Input buffer
10863 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10864 contain, upon output the number of BYTEs copied
10865 to pOut
10866 pOut [ O ] - Output buffer
10867
10868 RETURN VALUE:
10869 ULONG - Return code
10870 ===========================================================================*/
10871 ULONG UIMGetServiceStatus(
10872 GOBIHANDLE handle,
10873 ULONG to,
10874 ULONG inLen,
10875 const BYTE * pIn,
10876 ULONG * pOutLen,
10877 BYTE * pOut );
10878
10879 /*===========================================================================
10880 METHOD:
10881 UIMSetServiceStatus
10882
10883 DESCRIPTION:
10884 The function sends 'UIM/Set Service Status Request' (0x0037)
10885 and returns the response
10886
10887 PARAMETERS:
10888 handle [ I ] - Gobi interface handle
10889 to [ I ] - Timeout for transaction (in milliseconds)
10890 inLen [ I ] - Length of input buffer
10891 pIn [ I ] - Input buffer
10892 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10893 contain, upon output the number of BYTEs copied
10894 to pOut
10895 pOut [ O ] - Output buffer
10896
10897 RETURN VALUE:
10898 ULONG - Return code
10899 ===========================================================================*/
10900 ULONG UIMSetServiceStatus(
10901 GOBIHANDLE handle,
10902 ULONG to,
10903 ULONG inLen,
10904 const BYTE * pIn,
10905 ULONG * pOutLen,
10906 BYTE * pOut );
10907
10908 /*===========================================================================
10909 METHOD:
10910 UIMChangeProvisioningSession
10911
10912 DESCRIPTION:
10913 The function sends 'UIM/Change Provisioning Session Request' (0x0038)
10914 and returns the response
10915
10916 PARAMETERS:
10917 handle [ I ] - Gobi interface handle
10918 to [ I ] - Timeout for transaction (in milliseconds)
10919 inLen [ I ] - Length of input buffer
10920 pIn [ I ] - Input buffer
10921 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10922 contain, upon output the number of BYTEs copied
10923 to pOut
10924 pOut [ O ] - Output buffer
10925
10926 RETURN VALUE:
10927 ULONG - Return code
10928 ===========================================================================*/
10929 ULONG UIMChangeProvisioningSession(
10930 GOBIHANDLE handle,
10931 ULONG to,
10932 ULONG inLen,
10933 const BYTE * pIn,
10934 ULONG * pOutLen,
10935 BYTE * pOut );
10936
10937 /*===========================================================================
10938 METHOD:
10939 UIMGetLabel
10940
10941 DESCRIPTION:
10942 The function sends 'UIM/Get Label Request' (0x0039)
10943 and returns the response
10944
10945 PARAMETERS:
10946 handle [ I ] - Gobi interface handle
10947 to [ I ] - Timeout for transaction (in milliseconds)
10948 inLen [ I ] - Length of input buffer
10949 pIn [ I ] - Input buffer
10950 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10951 contain, upon output the number of BYTEs copied
10952 to pOut
10953 pOut [ O ] - Output buffer
10954
10955 RETURN VALUE:
10956 ULONG - Return code
10957 ===========================================================================*/
10958 ULONG UIMGetLabel(
10959 GOBIHANDLE handle,
10960 ULONG to,
10961 ULONG inLen,
10962 const BYTE * pIn,
10963 ULONG * pOutLen,
10964 BYTE * pOut );
10965
10966 /*===========================================================================
10967 METHOD:
10968 UIMGetConfiguration
10969
10970 DESCRIPTION:
10971 The function sends 'UIM/Get Configuration Request' (0x003A)
10972 and returns the response
10973
10974 PARAMETERS:
10975 handle [ I ] - Gobi interface handle
10976 to [ I ] - Timeout for transaction (in milliseconds)
10977 inLen [ I ] - Length of input buffer
10978 pIn [ I ] - Input buffer
10979 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
10980 contain, upon output the number of BYTEs copied
10981 to pOut
10982 pOut [ O ] - Output buffer
10983
10984 RETURN VALUE:
10985 ULONG - Return code
10986 ===========================================================================*/
10987 ULONG UIMGetConfiguration(
10988 GOBIHANDLE handle,
10989 ULONG to,
10990 ULONG inLen,
10991 const BYTE * pIn,
10992 ULONG * pOutLen,
10993 BYTE * pOut );
10994
10995 /*===========================================================================
10996 METHOD:
10997 UIMSendADPU
10998
10999 DESCRIPTION:
11000 The function sends 'UIM/Send ADPU Request' (0x003B)
11001 and returns the response
11002
11003 PARAMETERS:
11004 handle [ I ] - Gobi interface handle
11005 to [ I ] - Timeout for transaction (in milliseconds)
11006 inLen [ I ] - Length of input buffer
11007 pIn [ I ] - Input buffer
11008 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11009 contain, upon output the number of BYTEs copied
11010 to pOut
11011 pOut [ O ] - Output buffer
11012
11013 RETURN VALUE:
11014 ULONG - Return code
11015 ===========================================================================*/
11016 ULONG UIMSendADPU(
11017 GOBIHANDLE handle,
11018 ULONG to,
11019 ULONG inLen,
11020 const BYTE * pIn,
11021 ULONG * pOutLen,
11022 BYTE * pOut );
11023
11024 /*===========================================================================
11025 METHOD:
11026 UIMSAPConnection
11027
11028 DESCRIPTION:
11029 The function sends 'UIM/SAP Connection Request' (0x003C)
11030 and returns the response
11031
11032 PARAMETERS:
11033 handle [ I ] - Gobi interface handle
11034 to [ I ] - Timeout for transaction (in milliseconds)
11035 inLen [ I ] - Length of input buffer
11036 pIn [ I ] - Input buffer
11037 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11038 contain, upon output the number of BYTEs copied
11039 to pOut
11040 pOut [ O ] - Output buffer
11041
11042 RETURN VALUE:
11043 ULONG - Return code
11044 ===========================================================================*/
11045 ULONG UIMSAPConnection(
11046 GOBIHANDLE handle,
11047 ULONG to,
11048 ULONG inLen,
11049 const BYTE * pIn,
11050 ULONG * pOutLen,
11051 BYTE * pOut );
11052
11053 /*===========================================================================
11054 METHOD:
11055 UIMSAPRequest
11056
11057 DESCRIPTION:
11058 The function sends 'UIM/SAP Request Request' (0x003D)
11059 and returns the response
11060
11061 PARAMETERS:
11062 handle [ I ] - Gobi interface handle
11063 to [ I ] - Timeout for transaction (in milliseconds)
11064 inLen [ I ] - Length of input buffer
11065 pIn [ I ] - Input buffer
11066 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11067 contain, upon output the number of BYTEs copied
11068 to pOut
11069 pOut [ O ] - Output buffer
11070
11071 RETURN VALUE:
11072 ULONG - Return code
11073 ===========================================================================*/
11074 ULONG UIMSAPRequest(
11075 GOBIHANDLE handle,
11076 ULONG to,
11077 ULONG inLen,
11078 const BYTE * pIn,
11079 ULONG * pOutLen,
11080 BYTE * pOut );
11081
11082 /*===========================================================================
11083 METHOD:
11084 UIMLogicalChannel
11085
11086 DESCRIPTION:
11087 The function sends 'UIM/Logical Channel Request' (0x003F)
11088 and returns the response
11089
11090 PARAMETERS:
11091 handle [ I ] - Gobi interface handle
11092 to [ I ] - Timeout for transaction (in milliseconds)
11093 inLen [ I ] - Length of input buffer
11094 pIn [ I ] - Input buffer
11095 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11096 contain, upon output the number of BYTEs copied
11097 to pOut
11098 pOut [ O ] - Output buffer
11099
11100 RETURN VALUE:
11101 ULONG - Return code
11102 ===========================================================================*/
11103 ULONG UIMLogicalChannel(
11104 GOBIHANDLE handle,
11105 ULONG to,
11106 ULONG inLen,
11107 const BYTE * pIn,
11108 ULONG * pOutLen,
11109 BYTE * pOut );
11110
11111 /*===========================================================================
11112 METHOD:
11113 UIMSubscriptionOK
11114
11115 DESCRIPTION:
11116 The function sends 'UIM/Subscription OK Request' (0x0040)
11117 and returns the response
11118
11119 PARAMETERS:
11120 handle [ I ] - Gobi interface handle
11121 to [ I ] - Timeout for transaction (in milliseconds)
11122 inLen [ I ] - Length of input buffer
11123 pIn [ I ] - Input buffer
11124 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11125 contain, upon output the number of BYTEs copied
11126 to pOut
11127 pOut [ O ] - Output buffer
11128
11129 RETURN VALUE:
11130 ULONG - Return code
11131 ===========================================================================*/
11132 ULONG UIMSubscriptionOK(
11133 GOBIHANDLE handle,
11134 ULONG to,
11135 ULONG inLen,
11136 const BYTE * pIn,
11137 ULONG * pOutLen,
11138 BYTE * pOut );
11139
11140 /*===========================================================================
11141 METHOD:
11142 UIMGetATR
11143
11144 DESCRIPTION:
11145 The function sends 'UIM/Get ATR Request' (0x0041)
11146 and returns the response
11147
11148 PARAMETERS:
11149 handle [ I ] - Gobi interface handle
11150 to [ I ] - Timeout for transaction (in milliseconds)
11151 inLen [ I ] - Length of input buffer
11152 pIn [ I ] - Input buffer
11153 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11154 contain, upon output the number of BYTEs copied
11155 to pOut
11156 pOut [ O ] - Output buffer
11157
11158 RETURN VALUE:
11159 ULONG - Return code
11160 ===========================================================================*/
11161 ULONG UIMGetATR(
11162 GOBIHANDLE handle,
11163 ULONG to,
11164 ULONG inLen,
11165 const BYTE * pIn,
11166 ULONG * pOutLen,
11167 BYTE * pOut );
11168
11169 /*===========================================================================
11170 METHOD:
11171 UIMOpenLogicalChannel
11172
11173 DESCRIPTION:
11174 The function sends 'UIM/Open Logical Channel Request' (0x0042)
11175 and returns the response
11176
11177 PARAMETERS:
11178 handle [ I ] - Gobi interface handle
11179 to [ I ] - Timeout for transaction (in milliseconds)
11180 inLen [ I ] - Length of input buffer
11181 pIn [ I ] - Input buffer
11182 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11183 contain, upon output the number of BYTEs copied
11184 to pOut
11185 pOut [ O ] - Output buffer
11186
11187 RETURN VALUE:
11188 ULONG - Return code
11189 ===========================================================================*/
11190 ULONG UIMOpenLogicalChannel(
11191 GOBIHANDLE handle,
11192 ULONG to,
11193 ULONG inLen,
11194 const BYTE * pIn,
11195 ULONG * pOutLen,
11196 BYTE * pOut );
11197
11198 /*===========================================================================
11199 METHOD:
11200 PBMSetIndicationRegistrationState
11201
11202 DESCRIPTION:
11203 The function sends 'PBM/Set Indication Registration State Request' (0x0001)
11204 and returns the response
11205
11206 PARAMETERS:
11207 handle [ I ] - Gobi interface handle
11208 to [ I ] - Timeout for transaction (in milliseconds)
11209 inLen [ I ] - Length of input buffer
11210 pIn [ I ] - Input buffer
11211 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11212 contain, upon output the number of BYTEs copied
11213 to pOut
11214 pOut [ O ] - Output buffer
11215
11216 RETURN VALUE:
11217 ULONG - Return code
11218 ===========================================================================*/
11219 ULONG PBMSetIndicationRegistrationState(
11220 GOBIHANDLE handle,
11221 ULONG to,
11222 ULONG inLen,
11223 const BYTE * pIn,
11224 ULONG * pOutLen,
11225 BYTE * pOut );
11226
11227 /*===========================================================================
11228 METHOD:
11229 PBMGetCapabilities
11230
11231 DESCRIPTION:
11232 The function sends 'PBM/Get Capabilities Request' (0x0002)
11233 and returns the response
11234
11235 PARAMETERS:
11236 handle [ I ] - Gobi interface handle
11237 to [ I ] - Timeout for transaction (in milliseconds)
11238 inLen [ I ] - Length of input buffer
11239 pIn [ I ] - Input buffer
11240 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11241 contain, upon output the number of BYTEs copied
11242 to pOut
11243 pOut [ O ] - Output buffer
11244
11245 RETURN VALUE:
11246 ULONG - Return code
11247 ===========================================================================*/
11248 ULONG PBMGetCapabilities(
11249 GOBIHANDLE handle,
11250 ULONG to,
11251 ULONG inLen,
11252 const BYTE * pIn,
11253 ULONG * pOutLen,
11254 BYTE * pOut );
11255
11256 /*===========================================================================
11257 METHOD:
11258 PBMGetAllCapabilities
11259
11260 DESCRIPTION:
11261 The function sends 'PBM/Get All Capabilities Request' (0x0003)
11262 and returns the response
11263
11264 PARAMETERS:
11265 handle [ I ] - Gobi interface handle
11266 to [ I ] - Timeout for transaction (in milliseconds)
11267 inLen [ I ] - Reserved for future use (set to 0)
11268 pIn [ I ] - Reserved for future use (set to 0)
11269 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11270 contain, upon output the number of BYTEs copied
11271 to pOut
11272 pOut [ O ] - Output buffer
11273
11274 RETURN VALUE:
11275 ULONG - Return code
11276 ===========================================================================*/
11277 ULONG PBMGetAllCapabilities(
11278 GOBIHANDLE handle,
11279 ULONG to,
11280 ULONG inLen,
11281 const BYTE * pIn,
11282 ULONG * pOutLen,
11283 BYTE * pOut );
11284
11285 /*===========================================================================
11286 METHOD:
11287 PBMReadRecords
11288
11289 DESCRIPTION:
11290 The function sends 'PBM/Read Records Request' (0x0004)
11291 and returns the response
11292
11293 PARAMETERS:
11294 handle [ I ] - Gobi interface handle
11295 to [ I ] - Timeout for transaction (in milliseconds)
11296 inLen [ I ] - Length of input buffer
11297 pIn [ I ] - Input buffer
11298 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11299 contain, upon output the number of BYTEs copied
11300 to pOut
11301 pOut [ O ] - Output buffer
11302
11303 RETURN VALUE:
11304 ULONG - Return code
11305 ===========================================================================*/
11306 ULONG PBMReadRecords(
11307 GOBIHANDLE handle,
11308 ULONG to,
11309 ULONG inLen,
11310 const BYTE * pIn,
11311 ULONG * pOutLen,
11312 BYTE * pOut );
11313
11314 /*===========================================================================
11315 METHOD:
11316 PBMWriteRecord
11317
11318 DESCRIPTION:
11319 The function sends 'PBM/Write Record Request' (0x0005)
11320 and returns the response
11321
11322 PARAMETERS:
11323 handle [ I ] - Gobi interface handle
11324 to [ I ] - Timeout for transaction (in milliseconds)
11325 inLen [ I ] - Length of input buffer
11326 pIn [ I ] - Input buffer
11327 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11328 contain, upon output the number of BYTEs copied
11329 to pOut
11330 pOut [ O ] - Output buffer
11331
11332 RETURN VALUE:
11333 ULONG - Return code
11334 ===========================================================================*/
11335 ULONG PBMWriteRecord(
11336 GOBIHANDLE handle,
11337 ULONG to,
11338 ULONG inLen,
11339 const BYTE * pIn,
11340 ULONG * pOutLen,
11341 BYTE * pOut );
11342
11343 /*===========================================================================
11344 METHOD:
11345 PBMDeleteRecord
11346
11347 DESCRIPTION:
11348 The function sends 'PBM/Delete Record Request' (0x0006)
11349 and returns the response
11350
11351 PARAMETERS:
11352 handle [ I ] - Gobi interface handle
11353 to [ I ] - Timeout for transaction (in milliseconds)
11354 inLen [ I ] - Length of input buffer
11355 pIn [ I ] - Input buffer
11356 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11357 contain, upon output the number of BYTEs copied
11358 to pOut
11359 pOut [ O ] - Output buffer
11360
11361 RETURN VALUE:
11362 ULONG - Return code
11363 ===========================================================================*/
11364 ULONG PBMDeleteRecord(
11365 GOBIHANDLE handle,
11366 ULONG to,
11367 ULONG inLen,
11368 const BYTE * pIn,
11369 ULONG * pOutLen,
11370 BYTE * pOut );
11371
11372 /*===========================================================================
11373 METHOD:
11374 PBMDeleteAllRecords
11375
11376 DESCRIPTION:
11377 The function sends 'PBM/Delete All Records Request' (0x0007)
11378 and returns the response
11379
11380 PARAMETERS:
11381 handle [ I ] - Gobi interface handle
11382 to [ I ] - Timeout for transaction (in milliseconds)
11383 inLen [ I ] - Length of input buffer
11384 pIn [ I ] - Input buffer
11385 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11386 contain, upon output the number of BYTEs copied
11387 to pOut
11388 pOut [ O ] - Output buffer
11389
11390 RETURN VALUE:
11391 ULONG - Return code
11392 ===========================================================================*/
11393 ULONG PBMDeleteAllRecords(
11394 GOBIHANDLE handle,
11395 ULONG to,
11396 ULONG inLen,
11397 const BYTE * pIn,
11398 ULONG * pOutLen,
11399 BYTE * pOut );
11400
11401 /*===========================================================================
11402 METHOD:
11403 PBMSearchRecords
11404
11405 DESCRIPTION:
11406 The function sends 'PBM/Search Records Request' (0x0008)
11407 and returns the response
11408
11409 PARAMETERS:
11410 handle [ I ] - Gobi interface handle
11411 to [ I ] - Timeout for transaction (in milliseconds)
11412 inLen [ I ] - Length of input buffer
11413 pIn [ I ] - Input buffer
11414 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11415 contain, upon output the number of BYTEs copied
11416 to pOut
11417 pOut [ O ] - Output buffer
11418
11419 RETURN VALUE:
11420 ULONG - Return code
11421 ===========================================================================*/
11422 ULONG PBMSearchRecords(
11423 GOBIHANDLE handle,
11424 ULONG to,
11425 ULONG inLen,
11426 const BYTE * pIn,
11427 ULONG * pOutLen,
11428 BYTE * pOut );
11429
11430 /*===========================================================================
11431 METHOD:
11432 PBMGetEmergencyList
11433
11434 DESCRIPTION:
11435 The function sends 'PBM/Get Emergency List Request' (0x000E)
11436 and returns the response
11437
11438 PARAMETERS:
11439 handle [ I ] - Gobi interface handle
11440 to [ I ] - Timeout for transaction (in milliseconds)
11441 inLen [ I ] - Reserved for future use (set to 0)
11442 pIn [ I ] - Reserved for future use (set to 0)
11443 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11444 contain, upon output the number of BYTEs copied
11445 to pOut
11446 pOut [ O ] - Output buffer
11447
11448 RETURN VALUE:
11449 ULONG - Return code
11450 ===========================================================================*/
11451 ULONG PBMGetEmergencyList(
11452 GOBIHANDLE handle,
11453 ULONG to,
11454 ULONG inLen,
11455 const BYTE * pIn,
11456 ULONG * pOutLen,
11457 BYTE * pOut );
11458
11459 /*===========================================================================
11460 METHOD:
11461 PBMGetAllGroups
11462
11463 DESCRIPTION:
11464 The function sends 'PBM/Get All Groups Request' (0x000F)
11465 and returns the response
11466
11467 PARAMETERS:
11468 handle [ I ] - Gobi interface handle
11469 to [ I ] - Timeout for transaction (in milliseconds)
11470 inLen [ I ] - Reserved for future use (set to 0)
11471 pIn [ I ] - Reserved for future use (set to 0)
11472 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11473 contain, upon output the number of BYTEs copied
11474 to pOut
11475 pOut [ O ] - Output buffer
11476
11477 RETURN VALUE:
11478 ULONG - Return code
11479 ===========================================================================*/
11480 ULONG PBMGetAllGroups(
11481 GOBIHANDLE handle,
11482 ULONG to,
11483 ULONG inLen,
11484 const BYTE * pIn,
11485 ULONG * pOutLen,
11486 BYTE * pOut );
11487
11488 /*===========================================================================
11489 METHOD:
11490 PBMSetGroupInfo
11491
11492 DESCRIPTION:
11493 The function sends 'PBM/Set Group Info Request' (0x0010)
11494 and returns the response
11495
11496 PARAMETERS:
11497 handle [ I ] - Gobi interface handle
11498 to [ I ] - Timeout for transaction (in milliseconds)
11499 inLen [ I ] - Length of input buffer
11500 pIn [ I ] - Input buffer
11501 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11502 contain, upon output the number of BYTEs copied
11503 to pOut
11504 pOut [ O ] - Output buffer
11505
11506 RETURN VALUE:
11507 ULONG - Return code
11508 ===========================================================================*/
11509 ULONG PBMSetGroupInfo(
11510 GOBIHANDLE handle,
11511 ULONG to,
11512 ULONG inLen,
11513 const BYTE * pIn,
11514 ULONG * pOutLen,
11515 BYTE * pOut );
11516
11517 /*===========================================================================
11518 METHOD:
11519 PBMGetState
11520
11521 DESCRIPTION:
11522 The function sends 'PBM/Get State Request' (0x0011)
11523 and returns the response
11524
11525 PARAMETERS:
11526 handle [ I ] - Gobi interface handle
11527 to [ I ] - Timeout for transaction (in milliseconds)
11528 inLen [ I ] - Length of input buffer
11529 pIn [ I ] - Input buffer
11530 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11531 contain, upon output the number of BYTEs copied
11532 to pOut
11533 pOut [ O ] - Output buffer
11534
11535 RETURN VALUE:
11536 ULONG - Return code
11537 ===========================================================================*/
11538 ULONG PBMGetState(
11539 GOBIHANDLE handle,
11540 ULONG to,
11541 ULONG inLen,
11542 const BYTE * pIn,
11543 ULONG * pOutLen,
11544 BYTE * pOut );
11545
11546 /*===========================================================================
11547 METHOD:
11548 PBMReadAllHiddenRecords
11549
11550 DESCRIPTION:
11551 The function sends 'PBM/Read All Hidden Records Request' (0x0012)
11552 and returns the response
11553
11554 PARAMETERS:
11555 handle [ I ] - Gobi interface handle
11556 to [ I ] - Timeout for transaction (in milliseconds)
11557 inLen [ I ] - Length of input buffer
11558 pIn [ I ] - Input buffer
11559 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11560 contain, upon output the number of BYTEs copied
11561 to pOut
11562 pOut [ O ] - Output buffer
11563
11564 RETURN VALUE:
11565 ULONG - Return code
11566 ===========================================================================*/
11567 ULONG PBMReadAllHiddenRecords(
11568 GOBIHANDLE handle,
11569 ULONG to,
11570 ULONG inLen,
11571 const BYTE * pIn,
11572 ULONG * pOutLen,
11573 BYTE * pOut );
11574
11575 /*===========================================================================
11576 METHOD:
11577 PBMGetNextEmptyRecordID
11578
11579 DESCRIPTION:
11580 The function sends 'PBM/Get Next Empty Record ID Request' (0x0014)
11581 and returns the response
11582
11583 PARAMETERS:
11584 handle [ I ] - Gobi interface handle
11585 to [ I ] - Timeout for transaction (in milliseconds)
11586 inLen [ I ] - Length of input buffer
11587 pIn [ I ] - Input buffer
11588 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11589 contain, upon output the number of BYTEs copied
11590 to pOut
11591 pOut [ O ] - Output buffer
11592
11593 RETURN VALUE:
11594 ULONG - Return code
11595 ===========================================================================*/
11596 ULONG PBMGetNextEmptyRecordID(
11597 GOBIHANDLE handle,
11598 ULONG to,
11599 ULONG inLen,
11600 const BYTE * pIn,
11601 ULONG * pOutLen,
11602 BYTE * pOut );
11603
11604 /*===========================================================================
11605 METHOD:
11606 PBMGetNextRecordID
11607
11608 DESCRIPTION:
11609 The function sends 'PBM/Get Next Record ID Request' (0x0015)
11610 and returns the response
11611
11612 PARAMETERS:
11613 handle [ I ] - Gobi interface handle
11614 to [ I ] - Timeout for transaction (in milliseconds)
11615 inLen [ I ] - Length of input buffer
11616 pIn [ I ] - Input buffer
11617 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11618 contain, upon output the number of BYTEs copied
11619 to pOut
11620 pOut [ O ] - Output buffer
11621
11622 RETURN VALUE:
11623 ULONG - Return code
11624 ===========================================================================*/
11625 ULONG PBMGetNextRecordID(
11626 GOBIHANDLE handle,
11627 ULONG to,
11628 ULONG inLen,
11629 const BYTE * pIn,
11630 ULONG * pOutLen,
11631 BYTE * pOut );
11632
11633 /*===========================================================================
11634 METHOD:
11635 PBMGetAASList
11636
11637 DESCRIPTION:
11638 The function sends 'PBM/Get AAS List Request' (0x0016)
11639 and returns the response
11640
11641 PARAMETERS:
11642 handle [ I ] - Gobi interface handle
11643 to [ I ] - Timeout for transaction (in milliseconds)
11644 inLen [ I ] - Reserved for future use (set to 0)
11645 pIn [ I ] - Reserved for future use (set to 0)
11646 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11647 contain, upon output the number of BYTEs copied
11648 to pOut
11649 pOut [ O ] - Output buffer
11650
11651 RETURN VALUE:
11652 ULONG - Return code
11653 ===========================================================================*/
11654 ULONG PBMGetAASList(
11655 GOBIHANDLE handle,
11656 ULONG to,
11657 ULONG inLen,
11658 const BYTE * pIn,
11659 ULONG * pOutLen,
11660 BYTE * pOut );
11661
11662 /*===========================================================================
11663 METHOD:
11664 PBMSetAAS
11665
11666 DESCRIPTION:
11667 The function sends 'PBM/Set AAS Request' (0x0017)
11668 and returns the response
11669
11670 PARAMETERS:
11671 handle [ I ] - Gobi interface handle
11672 to [ I ] - Timeout for transaction (in milliseconds)
11673 inLen [ I ] - Length of input buffer
11674 pIn [ I ] - Input buffer
11675 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11676 contain, upon output the number of BYTEs copied
11677 to pOut
11678 pOut [ O ] - Output buffer
11679
11680 RETURN VALUE:
11681 ULONG - Return code
11682 ===========================================================================*/
11683 ULONG PBMSetAAS(
11684 GOBIHANDLE handle,
11685 ULONG to,
11686 ULONG inLen,
11687 const BYTE * pIn,
11688 ULONG * pOutLen,
11689 BYTE * pOut );
11690
11691 /*===========================================================================
11692 METHOD:
11693 PBMBindSubscription
11694
11695 DESCRIPTION:
11696 The function sends 'PBM/Bind Subscription Request' (0x001A)
11697 and returns the response
11698
11699 PARAMETERS:
11700 handle [ I ] - Gobi interface handle
11701 to [ I ] - Timeout for transaction (in milliseconds)
11702 inLen [ I ] - Length of input buffer
11703 pIn [ I ] - Input buffer
11704 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11705 contain, upon output the number of BYTEs copied
11706 to pOut
11707 pOut [ O ] - Output buffer
11708
11709 RETURN VALUE:
11710 ULONG - Return code
11711 ===========================================================================*/
11712 ULONG PBMBindSubscription(
11713 GOBIHANDLE handle,
11714 ULONG to,
11715 ULONG inLen,
11716 const BYTE * pIn,
11717 ULONG * pOutLen,
11718 BYTE * pOut );
11719
11720 /*===========================================================================
11721 METHOD:
11722 PBMGetSubscription
11723
11724 DESCRIPTION:
11725 The function sends 'PBM/Get Subscription Request' (0x001B)
11726 and returns the response
11727
11728 PARAMETERS:
11729 handle [ I ] - Gobi interface handle
11730 to [ I ] - Timeout for transaction (in milliseconds)
11731 inLen [ I ] - Reserved for future use (set to 0)
11732 pIn [ I ] - Reserved for future use (set to 0)
11733 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11734 contain, upon output the number of BYTEs copied
11735 to pOut
11736 pOut [ O ] - Output buffer
11737
11738 RETURN VALUE:
11739 ULONG - Return code
11740 ===========================================================================*/
11741 ULONG PBMGetSubscription(
11742 GOBIHANDLE handle,
11743 ULONG to,
11744 ULONG inLen,
11745 const BYTE * pIn,
11746 ULONG * pOutLen,
11747 BYTE * pOut );
11748
11749 /*===========================================================================
11750 METHOD:
11751 LOCClientRevision
11752
11753 DESCRIPTION:
11754 The function sends 'LOC/Client Revision Request' (0x0020)
11755 and returns the response
11756
11757 PARAMETERS:
11758 handle [ I ] - Gobi interface handle
11759 to [ I ] - Timeout for transaction (in milliseconds)
11760 inLen [ I ] - Length of input buffer
11761 pIn [ I ] - Input buffer
11762 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11763 contain, upon output the number of BYTEs copied
11764 to pOut
11765 pOut [ O ] - Output buffer
11766
11767 RETURN VALUE:
11768 ULONG - Return code
11769 ===========================================================================*/
11770 ULONG LOCClientRevision(
11771 GOBIHANDLE handle,
11772 ULONG to,
11773 ULONG inLen,
11774 const BYTE * pIn,
11775 ULONG * pOutLen,
11776 BYTE * pOut );
11777
11778 /*===========================================================================
11779 METHOD:
11780 LOCRegisterEvents
11781
11782 DESCRIPTION:
11783 The function sends 'LOC/Register Events Request' (0x0021)
11784 and returns the response
11785
11786 PARAMETERS:
11787 handle [ I ] - Gobi interface handle
11788 to [ I ] - Timeout for transaction (in milliseconds)
11789 inLen [ I ] - Length of input buffer
11790 pIn [ I ] - Input buffer
11791 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11792 contain, upon output the number of BYTEs copied
11793 to pOut
11794 pOut [ O ] - Output buffer
11795
11796 RETURN VALUE:
11797 ULONG - Return code
11798 ===========================================================================*/
11799 ULONG LOCRegisterEvents(
11800 GOBIHANDLE handle,
11801 ULONG to,
11802 ULONG inLen,
11803 const BYTE * pIn,
11804 ULONG * pOutLen,
11805 BYTE * pOut );
11806
11807 /*===========================================================================
11808 METHOD:
11809 LOCStart
11810
11811 DESCRIPTION:
11812 The function sends 'LOC/Start Request' (0x0022)
11813 and returns the response
11814
11815 PARAMETERS:
11816 handle [ I ] - Gobi interface handle
11817 to [ I ] - Timeout for transaction (in milliseconds)
11818 inLen [ I ] - Length of input buffer
11819 pIn [ I ] - Input buffer
11820 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11821 contain, upon output the number of BYTEs copied
11822 to pOut
11823 pOut [ O ] - Output buffer
11824
11825 RETURN VALUE:
11826 ULONG - Return code
11827 ===========================================================================*/
11828 ULONG LOCStart(
11829 GOBIHANDLE handle,
11830 ULONG to,
11831 ULONG inLen,
11832 const BYTE * pIn,
11833 ULONG * pOutLen,
11834 BYTE * pOut );
11835
11836 /*===========================================================================
11837 METHOD:
11838 LOCStop
11839
11840 DESCRIPTION:
11841 The function sends 'LOC/Stop Request' (0x0023)
11842 and returns the response
11843
11844 PARAMETERS:
11845 handle [ I ] - Gobi interface handle
11846 to [ I ] - Timeout for transaction (in milliseconds)
11847 inLen [ I ] - Length of input buffer
11848 pIn [ I ] - Input buffer
11849 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11850 contain, upon output the number of BYTEs copied
11851 to pOut
11852 pOut [ O ] - Output buffer
11853
11854 RETURN VALUE:
11855 ULONG - Return code
11856 ===========================================================================*/
11857 ULONG LOCStop(
11858 GOBIHANDLE handle,
11859 ULONG to,
11860 ULONG inLen,
11861 const BYTE * pIn,
11862 ULONG * pOutLen,
11863 BYTE * pOut );
11864
11865 /*===========================================================================
11866 METHOD:
11867 LOCGetServiceRevision
11868
11869 DESCRIPTION:
11870 The function sends 'LOC/Get Service Revision Request' (0x0032)
11871 and returns the response
11872
11873 PARAMETERS:
11874 handle [ I ] - Gobi interface handle
11875 to [ I ] - Timeout for transaction (in milliseconds)
11876 inLen [ I ] - Reserved for future use (set to 0)
11877 pIn [ I ] - Reserved for future use (set to 0)
11878 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11879 contain, upon output the number of BYTEs copied
11880 to pOut
11881 pOut [ O ] - Output buffer
11882
11883 RETURN VALUE:
11884 ULONG - Return code
11885 ===========================================================================*/
11886 ULONG LOCGetServiceRevision(
11887 GOBIHANDLE handle,
11888 ULONG to,
11889 ULONG inLen,
11890 const BYTE * pIn,
11891 ULONG * pOutLen,
11892 BYTE * pOut );
11893
11894 /*===========================================================================
11895 METHOD:
11896 LOCGetFixCriteria
11897
11898 DESCRIPTION:
11899 The function sends 'LOC/Get Fix Criteria Request' (0x0033)
11900 and returns the response
11901
11902 PARAMETERS:
11903 handle [ I ] - Gobi interface handle
11904 to [ I ] - Timeout for transaction (in milliseconds)
11905 inLen [ I ] - Reserved for future use (set to 0)
11906 pIn [ I ] - Reserved for future use (set to 0)
11907 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11908 contain, upon output the number of BYTEs copied
11909 to pOut
11910 pOut [ O ] - Output buffer
11911
11912 RETURN VALUE:
11913 ULONG - Return code
11914 ===========================================================================*/
11915 ULONG LOCGetFixCriteria(
11916 GOBIHANDLE handle,
11917 ULONG to,
11918 ULONG inLen,
11919 const BYTE * pIn,
11920 ULONG * pOutLen,
11921 BYTE * pOut );
11922
11923 /*===========================================================================
11924 METHOD:
11925 LOCProvideNIUserResponse
11926
11927 DESCRIPTION:
11928 The function sends 'LOC/Provide NI User Response Request' (0x0034)
11929 and returns the response
11930
11931 PARAMETERS:
11932 handle [ I ] - Gobi interface handle
11933 to [ I ] - Timeout for transaction (in milliseconds)
11934 inLen [ I ] - Length of input buffer
11935 pIn [ I ] - Input buffer
11936 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11937 contain, upon output the number of BYTEs copied
11938 to pOut
11939 pOut [ O ] - Output buffer
11940
11941 RETURN VALUE:
11942 ULONG - Return code
11943 ===========================================================================*/
11944 ULONG LOCProvideNIUserResponse(
11945 GOBIHANDLE handle,
11946 ULONG to,
11947 ULONG inLen,
11948 const BYTE * pIn,
11949 ULONG * pOutLen,
11950 BYTE * pOut );
11951
11952 /*===========================================================================
11953 METHOD:
11954 LOCInjectPredictedOrbitsData
11955
11956 DESCRIPTION:
11957 The function sends 'LOC/Inject Predicted Orbits Data Request' (0x0035)
11958 and returns the response
11959
11960 PARAMETERS:
11961 handle [ I ] - Gobi interface handle
11962 to [ I ] - Timeout for transaction (in milliseconds)
11963 inLen [ I ] - Length of input buffer
11964 pIn [ I ] - Input buffer
11965 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11966 contain, upon output the number of BYTEs copied
11967 to pOut
11968 pOut [ O ] - Output buffer
11969
11970 RETURN VALUE:
11971 ULONG - Return code
11972 ===========================================================================*/
11973 ULONG LOCInjectPredictedOrbitsData(
11974 GOBIHANDLE handle,
11975 ULONG to,
11976 ULONG inLen,
11977 const BYTE * pIn,
11978 ULONG * pOutLen,
11979 BYTE * pOut );
11980
11981 /*===========================================================================
11982 METHOD:
11983 LOCGetPredictedOrbitsDataSource
11984
11985 DESCRIPTION:
11986 The function sends 'LOC/Get Predicted Orbits Data Source Request' (0x0036)
11987 and returns the response
11988
11989 PARAMETERS:
11990 handle [ I ] - Gobi interface handle
11991 to [ I ] - Timeout for transaction (in milliseconds)
11992 inLen [ I ] - Reserved for future use (set to 0)
11993 pIn [ I ] - Reserved for future use (set to 0)
11994 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
11995 contain, upon output the number of BYTEs copied
11996 to pOut
11997 pOut [ O ] - Output buffer
11998
11999 RETURN VALUE:
12000 ULONG - Return code
12001 ===========================================================================*/
12002 ULONG LOCGetPredictedOrbitsDataSource(
12003 GOBIHANDLE handle,
12004 ULONG to,
12005 ULONG inLen,
12006 const BYTE * pIn,
12007 ULONG * pOutLen,
12008 BYTE * pOut );
12009
12010 /*===========================================================================
12011 METHOD:
12012 LOCGetPredictedOrbitsDataValidity
12013
12014 DESCRIPTION:
12015 The function sends 'LOC/Get Predicted Orbits Data Validity Request' (0x0037)
12016 and returns the response
12017
12018 PARAMETERS:
12019 handle [ I ] - Gobi interface handle
12020 to [ I ] - Timeout for transaction (in milliseconds)
12021 inLen [ I ] - Reserved for future use (set to 0)
12022 pIn [ I ] - Reserved for future use (set to 0)
12023 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12024 contain, upon output the number of BYTEs copied
12025 to pOut
12026 pOut [ O ] - Output buffer
12027
12028 RETURN VALUE:
12029 ULONG - Return code
12030 ===========================================================================*/
12031 ULONG LOCGetPredictedOrbitsDataValidity(
12032 GOBIHANDLE handle,
12033 ULONG to,
12034 ULONG inLen,
12035 const BYTE * pIn,
12036 ULONG * pOutLen,
12037 BYTE * pOut );
12038
12039 /*===========================================================================
12040 METHOD:
12041 LOCInjectUTCTime
12042
12043 DESCRIPTION:
12044 The function sends 'LOC/Inject UTC Time Request' (0x0038)
12045 and returns the response
12046
12047 PARAMETERS:
12048 handle [ I ] - Gobi interface handle
12049 to [ I ] - Timeout for transaction (in milliseconds)
12050 inLen [ I ] - Length of input buffer
12051 pIn [ I ] - Input buffer
12052 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12053 contain, upon output the number of BYTEs copied
12054 to pOut
12055 pOut [ O ] - Output buffer
12056
12057 RETURN VALUE:
12058 ULONG - Return code
12059 ===========================================================================*/
12060 ULONG LOCInjectUTCTime(
12061 GOBIHANDLE handle,
12062 ULONG to,
12063 ULONG inLen,
12064 const BYTE * pIn,
12065 ULONG * pOutLen,
12066 BYTE * pOut );
12067
12068 /*===========================================================================
12069 METHOD:
12070 LOCInjectPosition
12071
12072 DESCRIPTION:
12073 The function sends 'LOC/Inject Position Request' (0x0039)
12074 and returns the response
12075
12076 PARAMETERS:
12077 handle [ I ] - Gobi interface handle
12078 to [ I ] - Timeout for transaction (in milliseconds)
12079 inLen [ I ] - Length of input buffer
12080 pIn [ I ] - Input buffer
12081 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12082 contain, upon output the number of BYTEs copied
12083 to pOut
12084 pOut [ O ] - Output buffer
12085
12086 RETURN VALUE:
12087 ULONG - Return code
12088 ===========================================================================*/
12089 ULONG LOCInjectPosition(
12090 GOBIHANDLE handle,
12091 ULONG to,
12092 ULONG inLen,
12093 const BYTE * pIn,
12094 ULONG * pOutLen,
12095 BYTE * pOut );
12096
12097 /*===========================================================================
12098 METHOD:
12099 LOCSetEngineLock
12100
12101 DESCRIPTION:
12102 The function sends 'LOC/Set Engine Lock Request' (0x003A)
12103 and returns the response
12104
12105 PARAMETERS:
12106 handle [ I ] - Gobi interface handle
12107 to [ I ] - Timeout for transaction (in milliseconds)
12108 inLen [ I ] - Length of input buffer
12109 pIn [ I ] - Input buffer
12110 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12111 contain, upon output the number of BYTEs copied
12112 to pOut
12113 pOut [ O ] - Output buffer
12114
12115 RETURN VALUE:
12116 ULONG - Return code
12117 ===========================================================================*/
12118 ULONG LOCSetEngineLock(
12119 GOBIHANDLE handle,
12120 ULONG to,
12121 ULONG inLen,
12122 const BYTE * pIn,
12123 ULONG * pOutLen,
12124 BYTE * pOut );
12125
12126 /*===========================================================================
12127 METHOD:
12128 LOCGetEngineLock
12129
12130 DESCRIPTION:
12131 The function sends 'LOC/Get Engine Lock Request' (0x003B)
12132 and returns the response
12133
12134 PARAMETERS:
12135 handle [ I ] - Gobi interface handle
12136 to [ I ] - Timeout for transaction (in milliseconds)
12137 inLen [ I ] - Reserved for future use (set to 0)
12138 pIn [ I ] - Reserved for future use (set to 0)
12139 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12140 contain, upon output the number of BYTEs copied
12141 to pOut
12142 pOut [ O ] - Output buffer
12143
12144 RETURN VALUE:
12145 ULONG - Return code
12146 ===========================================================================*/
12147 ULONG LOCGetEngineLock(
12148 GOBIHANDLE handle,
12149 ULONG to,
12150 ULONG inLen,
12151 const BYTE * pIn,
12152 ULONG * pOutLen,
12153 BYTE * pOut );
12154
12155 /*===========================================================================
12156 METHOD:
12157 LOCSetSBASConfig
12158
12159 DESCRIPTION:
12160 The function sends 'LOC/Set SBAS Config Request' (0x003C)
12161 and returns the response
12162
12163 PARAMETERS:
12164 handle [ I ] - Gobi interface handle
12165 to [ I ] - Timeout for transaction (in milliseconds)
12166 inLen [ I ] - Length of input buffer
12167 pIn [ I ] - Input buffer
12168 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12169 contain, upon output the number of BYTEs copied
12170 to pOut
12171 pOut [ O ] - Output buffer
12172
12173 RETURN VALUE:
12174 ULONG - Return code
12175 ===========================================================================*/
12176 ULONG LOCSetSBASConfig(
12177 GOBIHANDLE handle,
12178 ULONG to,
12179 ULONG inLen,
12180 const BYTE * pIn,
12181 ULONG * pOutLen,
12182 BYTE * pOut );
12183
12184 /*===========================================================================
12185 METHOD:
12186 LOCGetSBASConfig
12187
12188 DESCRIPTION:
12189 The function sends 'LOC/Get SBAS Config Request' (0x003D)
12190 and returns the response
12191
12192 PARAMETERS:
12193 handle [ I ] - Gobi interface handle
12194 to [ I ] - Timeout for transaction (in milliseconds)
12195 inLen [ I ] - Reserved for future use (set to 0)
12196 pIn [ I ] - Reserved for future use (set to 0)
12197 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12198 contain, upon output the number of BYTEs copied
12199 to pOut
12200 pOut [ O ] - Output buffer
12201
12202 RETURN VALUE:
12203 ULONG - Return code
12204 ===========================================================================*/
12205 ULONG LOCGetSBASConfig(
12206 GOBIHANDLE handle,
12207 ULONG to,
12208 ULONG inLen,
12209 const BYTE * pIn,
12210 ULONG * pOutLen,
12211 BYTE * pOut );
12212
12213 /*===========================================================================
12214 METHOD:
12215 LOCSetNMEATypes
12216
12217 DESCRIPTION:
12218 The function sends 'LOC/Set NMEA Types Request' (0x003E)
12219 and returns the response
12220
12221 PARAMETERS:
12222 handle [ I ] - Gobi interface handle
12223 to [ I ] - Timeout for transaction (in milliseconds)
12224 inLen [ I ] - Length of input buffer
12225 pIn [ I ] - Input buffer
12226 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12227 contain, upon output the number of BYTEs copied
12228 to pOut
12229 pOut [ O ] - Output buffer
12230
12231 RETURN VALUE:
12232 ULONG - Return code
12233 ===========================================================================*/
12234 ULONG LOCSetNMEATypes(
12235 GOBIHANDLE handle,
12236 ULONG to,
12237 ULONG inLen,
12238 const BYTE * pIn,
12239 ULONG * pOutLen,
12240 BYTE * pOut );
12241
12242 /*===========================================================================
12243 METHOD:
12244 LOCGetNMEATypes
12245
12246 DESCRIPTION:
12247 The function sends 'LOC/Get NMEA Types Request' (0x003F)
12248 and returns the response
12249
12250 PARAMETERS:
12251 handle [ I ] - Gobi interface handle
12252 to [ I ] - Timeout for transaction (in milliseconds)
12253 inLen [ I ] - Reserved for future use (set to 0)
12254 pIn [ I ] - Reserved for future use (set to 0)
12255 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12256 contain, upon output the number of BYTEs copied
12257 to pOut
12258 pOut [ O ] - Output buffer
12259
12260 RETURN VALUE:
12261 ULONG - Return code
12262 ===========================================================================*/
12263 ULONG LOCGetNMEATypes(
12264 GOBIHANDLE handle,
12265 ULONG to,
12266 ULONG inLen,
12267 const BYTE * pIn,
12268 ULONG * pOutLen,
12269 BYTE * pOut );
12270
12271 /*===========================================================================
12272 METHOD:
12273 LOCSetLowPowerMode
12274
12275 DESCRIPTION:
12276 The function sends 'LOC/Set Low Power Mode Request' (0x0040)
12277 and returns the response
12278
12279 PARAMETERS:
12280 handle [ I ] - Gobi interface handle
12281 to [ I ] - Timeout for transaction (in milliseconds)
12282 inLen [ I ] - Length of input buffer
12283 pIn [ I ] - Input buffer
12284 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12285 contain, upon output the number of BYTEs copied
12286 to pOut
12287 pOut [ O ] - Output buffer
12288
12289 RETURN VALUE:
12290 ULONG - Return code
12291 ===========================================================================*/
12292 ULONG LOCSetLowPowerMode(
12293 GOBIHANDLE handle,
12294 ULONG to,
12295 ULONG inLen,
12296 const BYTE * pIn,
12297 ULONG * pOutLen,
12298 BYTE * pOut );
12299
12300 /*===========================================================================
12301 METHOD:
12302 LOCGetLowPowerMode
12303
12304 DESCRIPTION:
12305 The function sends 'LOC/Get Low Power Mode Request' (0x0041)
12306 and returns the response
12307
12308 PARAMETERS:
12309 handle [ I ] - Gobi interface handle
12310 to [ I ] - Timeout for transaction (in milliseconds)
12311 inLen [ I ] - Reserved for future use (set to 0)
12312 pIn [ I ] - Reserved for future use (set to 0)
12313 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12314 contain, upon output the number of BYTEs copied
12315 to pOut
12316 pOut [ O ] - Output buffer
12317
12318 RETURN VALUE:
12319 ULONG - Return code
12320 ===========================================================================*/
12321 ULONG LOCGetLowPowerMode(
12322 GOBIHANDLE handle,
12323 ULONG to,
12324 ULONG inLen,
12325 const BYTE * pIn,
12326 ULONG * pOutLen,
12327 BYTE * pOut );
12328
12329 /*===========================================================================
12330 METHOD:
12331 LOCSetLocationServer
12332
12333 DESCRIPTION:
12334 The function sends 'LOC/Set Location Server Request' (0x0042)
12335 and returns the response
12336
12337 PARAMETERS:
12338 handle [ I ] - Gobi interface handle
12339 to [ I ] - Timeout for transaction (in milliseconds)
12340 inLen [ I ] - Length of input buffer
12341 pIn [ I ] - Input buffer
12342 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12343 contain, upon output the number of BYTEs copied
12344 to pOut
12345 pOut [ O ] - Output buffer
12346
12347 RETURN VALUE:
12348 ULONG - Return code
12349 ===========================================================================*/
12350 ULONG LOCSetLocationServer(
12351 GOBIHANDLE handle,
12352 ULONG to,
12353 ULONG inLen,
12354 const BYTE * pIn,
12355 ULONG * pOutLen,
12356 BYTE * pOut );
12357
12358 /*===========================================================================
12359 METHOD:
12360 LOCGetLocationServer
12361
12362 DESCRIPTION:
12363 The function sends 'LOC/Get Location Server Request' (0x0043)
12364 and returns the response
12365
12366 PARAMETERS:
12367 handle [ I ] - Gobi interface handle
12368 to [ I ] - Timeout for transaction (in milliseconds)
12369 inLen [ I ] - Length of input buffer
12370 pIn [ I ] - Input buffer
12371 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12372 contain, upon output the number of BYTEs copied
12373 to pOut
12374 pOut [ O ] - Output buffer
12375
12376 RETURN VALUE:
12377 ULONG - Return code
12378 ===========================================================================*/
12379 ULONG LOCGetLocationServer(
12380 GOBIHANDLE handle,
12381 ULONG to,
12382 ULONG inLen,
12383 const BYTE * pIn,
12384 ULONG * pOutLen,
12385 BYTE * pOut );
12386
12387 /*===========================================================================
12388 METHOD:
12389 LOCDeleteAssistData
12390
12391 DESCRIPTION:
12392 The function sends 'LOC/Delete Assist Data Request' (0x0044)
12393 and returns the response
12394
12395 PARAMETERS:
12396 handle [ I ] - Gobi interface handle
12397 to [ I ] - Timeout for transaction (in milliseconds)
12398 inLen [ I ] - Length of input buffer
12399 pIn [ I ] - Input buffer
12400 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12401 contain, upon output the number of BYTEs copied
12402 to pOut
12403 pOut [ O ] - Output buffer
12404
12405 RETURN VALUE:
12406 ULONG - Return code
12407 ===========================================================================*/
12408 ULONG LOCDeleteAssistData(
12409 GOBIHANDLE handle,
12410 ULONG to,
12411 ULONG inLen,
12412 const BYTE * pIn,
12413 ULONG * pOutLen,
12414 BYTE * pOut );
12415
12416 /*===========================================================================
12417 METHOD:
12418 LOCSetXTRATSessionControl
12419
12420 DESCRIPTION:
12421 The function sends 'LOC/Set XTRA-T Session Control Request' (0x0045)
12422 and returns the response
12423
12424 PARAMETERS:
12425 handle [ I ] - Gobi interface handle
12426 to [ I ] - Timeout for transaction (in milliseconds)
12427 inLen [ I ] - Length of input buffer
12428 pIn [ I ] - Input buffer
12429 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12430 contain, upon output the number of BYTEs copied
12431 to pOut
12432 pOut [ O ] - Output buffer
12433
12434 RETURN VALUE:
12435 ULONG - Return code
12436 ===========================================================================*/
12437 ULONG LOCSetXTRATSessionControl(
12438 GOBIHANDLE handle,
12439 ULONG to,
12440 ULONG inLen,
12441 const BYTE * pIn,
12442 ULONG * pOutLen,
12443 BYTE * pOut );
12444
12445 /*===========================================================================
12446 METHOD:
12447 LOC
12448
12449 DESCRIPTION:
12450 The function sends 'LOC' (0x0046)
12451 and returns the response
12452
12453 PARAMETERS:
12454 handle [ I ] - Gobi interface handle
12455 to [ I ] - Timeout for transaction (in milliseconds)
12456 inLen [ I ] - Reserved for future use (set to 0)
12457 pIn [ I ] - Reserved for future use (set to 0)
12458 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12459 contain, upon output the number of BYTEs copied
12460 to pOut
12461 pOut [ O ] - Output buffer
12462
12463 RETURN VALUE:
12464 ULONG - Return code
12465 ===========================================================================*/
12466 ULONG LOC(
12467 GOBIHANDLE handle,
12468 ULONG to,
12469 ULONG inLen,
12470 const BYTE * pIn,
12471 ULONG * pOutLen,
12472 BYTE * pOut );
12473
12474 /*===========================================================================
12475 METHOD:
12476 LOCInjectWiFiPosition
12477
12478 DESCRIPTION:
12479 The function sends 'LOC/Inject Wi-Fi Position Request' (0x0047)
12480 and returns the response
12481
12482 PARAMETERS:
12483 handle [ I ] - Gobi interface handle
12484 to [ I ] - Timeout for transaction (in milliseconds)
12485 inLen [ I ] - Length of input buffer
12486 pIn [ I ] - Input buffer
12487 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12488 contain, upon output the number of BYTEs copied
12489 to pOut
12490 pOut [ O ] - Output buffer
12491
12492 RETURN VALUE:
12493 ULONG - Return code
12494 ===========================================================================*/
12495 ULONG LOCInjectWiFiPosition(
12496 GOBIHANDLE handle,
12497 ULONG to,
12498 ULONG inLen,
12499 const BYTE * pIn,
12500 ULONG * pOutLen,
12501 BYTE * pOut );
12502
12503 /*===========================================================================
12504 METHOD:
12505 LOCProvideWiFiStatus
12506
12507 DESCRIPTION:
12508 The function sends 'LOC/Provide Wi-Fi Status Request' (0x0048)
12509 and returns the response
12510
12511 PARAMETERS:
12512 handle [ I ] - Gobi interface handle
12513 to [ I ] - Timeout for transaction (in milliseconds)
12514 inLen [ I ] - Length of input buffer
12515 pIn [ I ] - Input buffer
12516 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12517 contain, upon output the number of BYTEs copied
12518 to pOut
12519 pOut [ O ] - Output buffer
12520
12521 RETURN VALUE:
12522 ULONG - Return code
12523 ===========================================================================*/
12524 ULONG LOCProvideWiFiStatus(
12525 GOBIHANDLE handle,
12526 ULONG to,
12527 ULONG inLen,
12528 const BYTE * pIn,
12529 ULONG * pOutLen,
12530 BYTE * pOut );
12531
12532 /*===========================================================================
12533 METHOD:
12534 LOCGetRegisteredEvents
12535
12536 DESCRIPTION:
12537 The function sends 'LOC/Get Registered Events Request' (0x0049)
12538 and returns the response
12539
12540 PARAMETERS:
12541 handle [ I ] - Gobi interface handle
12542 to [ I ] - Timeout for transaction (in milliseconds)
12543 inLen [ I ] - Reserved for future use (set to 0)
12544 pIn [ I ] - Reserved for future use (set to 0)
12545 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12546 contain, upon output the number of BYTEs copied
12547 to pOut
12548 pOut [ O ] - Output buffer
12549
12550 RETURN VALUE:
12551 ULONG - Return code
12552 ===========================================================================*/
12553 ULONG LOCGetRegisteredEvents(
12554 GOBIHANDLE handle,
12555 ULONG to,
12556 ULONG inLen,
12557 const BYTE * pIn,
12558 ULONG * pOutLen,
12559 BYTE * pOut );
12560
12561 /*===========================================================================
12562 METHOD:
12563 LOCSetOperationMode
12564
12565 DESCRIPTION:
12566 The function sends 'LOC/Set Operation Mode Request' (0x004A)
12567 and returns the response
12568
12569 PARAMETERS:
12570 handle [ I ] - Gobi interface handle
12571 to [ I ] - Timeout for transaction (in milliseconds)
12572 inLen [ I ] - Length of input buffer
12573 pIn [ I ] - Input buffer
12574 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12575 contain, upon output the number of BYTEs copied
12576 to pOut
12577 pOut [ O ] - Output buffer
12578
12579 RETURN VALUE:
12580 ULONG - Return code
12581 ===========================================================================*/
12582 ULONG LOCSetOperationMode(
12583 GOBIHANDLE handle,
12584 ULONG to,
12585 ULONG inLen,
12586 const BYTE * pIn,
12587 ULONG * pOutLen,
12588 BYTE * pOut );
12589
12590 /*===========================================================================
12591 METHOD:
12592 LOCGetOperationMode
12593
12594 DESCRIPTION:
12595 The function sends 'LOC/Get Operation Mode Request' (0x004B)
12596 and returns the response
12597
12598 PARAMETERS:
12599 handle [ I ] - Gobi interface handle
12600 to [ I ] - Timeout for transaction (in milliseconds)
12601 inLen [ I ] - Reserved for future use (set to 0)
12602 pIn [ I ] - Reserved for future use (set to 0)
12603 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12604 contain, upon output the number of BYTEs copied
12605 to pOut
12606 pOut [ O ] - Output buffer
12607
12608 RETURN VALUE:
12609 ULONG - Return code
12610 ===========================================================================*/
12611 ULONG LOCGetOperationMode(
12612 GOBIHANDLE handle,
12613 ULONG to,
12614 ULONG inLen,
12615 const BYTE * pIn,
12616 ULONG * pOutLen,
12617 BYTE * pOut );
12618
12619 /*===========================================================================
12620 METHOD:
12621 LOCSetSPIStatus
12622
12623 DESCRIPTION:
12624 The function sends 'LOC/Set SPI Status Request' (0x004C)
12625 and returns the response
12626
12627 PARAMETERS:
12628 handle [ I ] - Gobi interface handle
12629 to [ I ] - Timeout for transaction (in milliseconds)
12630 inLen [ I ] - Length of input buffer
12631 pIn [ I ] - Input buffer
12632 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12633 contain, upon output the number of BYTEs copied
12634 to pOut
12635 pOut [ O ] - Output buffer
12636
12637 RETURN VALUE:
12638 ULONG - Return code
12639 ===========================================================================*/
12640 ULONG LOCSetSPIStatus(
12641 GOBIHANDLE handle,
12642 ULONG to,
12643 ULONG inLen,
12644 const BYTE * pIn,
12645 ULONG * pOutLen,
12646 BYTE * pOut );
12647
12648 /*===========================================================================
12649 METHOD:
12650 LOCInjectSensorData
12651
12652 DESCRIPTION:
12653 The function sends 'LOC/Inject Sensor Data Request' (0x004D)
12654 and returns the response
12655
12656 PARAMETERS:
12657 handle [ I ] - Gobi interface handle
12658 to [ I ] - Timeout for transaction (in milliseconds)
12659 inLen [ I ] - Length of input buffer
12660 pIn [ I ] - Input buffer
12661 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12662 contain, upon output the number of BYTEs copied
12663 to pOut
12664 pOut [ O ] - Output buffer
12665
12666 RETURN VALUE:
12667 ULONG - Return code
12668 ===========================================================================*/
12669 ULONG LOCInjectSensorData(
12670 GOBIHANDLE handle,
12671 ULONG to,
12672 ULONG inLen,
12673 const BYTE * pIn,
12674 ULONG * pOutLen,
12675 BYTE * pOut );
12676
12677 /*===========================================================================
12678 METHOD:
12679 LOCInjectTimeSyncData
12680
12681 DESCRIPTION:
12682 The function sends 'LOC/Inject Time Sync Data Request' (0x004E)
12683 and returns the response
12684
12685 PARAMETERS:
12686 handle [ I ] - Gobi interface handle
12687 to [ I ] - Timeout for transaction (in milliseconds)
12688 inLen [ I ] - Length of input buffer
12689 pIn [ I ] - Input buffer
12690 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12691 contain, upon output the number of BYTEs copied
12692 to pOut
12693 pOut [ O ] - Output buffer
12694
12695 RETURN VALUE:
12696 ULONG - Return code
12697 ===========================================================================*/
12698 ULONG LOCInjectTimeSyncData(
12699 GOBIHANDLE handle,
12700 ULONG to,
12701 ULONG inLen,
12702 const BYTE * pIn,
12703 ULONG * pOutLen,
12704 BYTE * pOut );
12705
12706 /*===========================================================================
12707 METHOD:
12708 LOCSetCradleMountConfig
12709
12710 DESCRIPTION:
12711 The function sends 'LOC/Set Cradle Mount Config Request' (0x004F)
12712 and returns the response
12713
12714 PARAMETERS:
12715 handle [ I ] - Gobi interface handle
12716 to [ I ] - Timeout for transaction (in milliseconds)
12717 inLen [ I ] - Length of input buffer
12718 pIn [ I ] - Input buffer
12719 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12720 contain, upon output the number of BYTEs copied
12721 to pOut
12722 pOut [ O ] - Output buffer
12723
12724 RETURN VALUE:
12725 ULONG - Return code
12726 ===========================================================================*/
12727 ULONG LOCSetCradleMountConfig(
12728 GOBIHANDLE handle,
12729 ULONG to,
12730 ULONG inLen,
12731 const BYTE * pIn,
12732 ULONG * pOutLen,
12733 BYTE * pOut );
12734
12735 /*===========================================================================
12736 METHOD:
12737 LOCGetCradleMountConfig
12738
12739 DESCRIPTION:
12740 The function sends 'LOC/Get Cradle Mount Config Request' (0x0050)
12741 and returns the response
12742
12743 PARAMETERS:
12744 handle [ I ] - Gobi interface handle
12745 to [ I ] - Timeout for transaction (in milliseconds)
12746 inLen [ I ] - Reserved for future use (set to 0)
12747 pIn [ I ] - Reserved for future use (set to 0)
12748 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12749 contain, upon output the number of BYTEs copied
12750 to pOut
12751 pOut [ O ] - Output buffer
12752
12753 RETURN VALUE:
12754 ULONG - Return code
12755 ===========================================================================*/
12756 ULONG LOCGetCradleMountConfig(
12757 GOBIHANDLE handle,
12758 ULONG to,
12759 ULONG inLen,
12760 const BYTE * pIn,
12761 ULONG * pOutLen,
12762 BYTE * pOut );
12763
12764 /*===========================================================================
12765 METHOD:
12766 LOCSetExternalPowerConfig
12767
12768 DESCRIPTION:
12769 The function sends 'LOC/Set External Power Config Request' (0x0051)
12770 and returns the response
12771
12772 PARAMETERS:
12773 handle [ I ] - Gobi interface handle
12774 to [ I ] - Timeout for transaction (in milliseconds)
12775 inLen [ I ] - Length of input buffer
12776 pIn [ I ] - Input buffer
12777 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12778 contain, upon output the number of BYTEs copied
12779 to pOut
12780 pOut [ O ] - Output buffer
12781
12782 RETURN VALUE:
12783 ULONG - Return code
12784 ===========================================================================*/
12785 ULONG LOCSetExternalPowerConfig(
12786 GOBIHANDLE handle,
12787 ULONG to,
12788 ULONG inLen,
12789 const BYTE * pIn,
12790 ULONG * pOutLen,
12791 BYTE * pOut );
12792
12793 /*===========================================================================
12794 METHOD:
12795 LOCGetExternalPowerConfig
12796
12797 DESCRIPTION:
12798 The function sends 'LOC/Get External Power Config Request' (0x0052)
12799 and returns the response
12800
12801 PARAMETERS:
12802 handle [ I ] - Gobi interface handle
12803 to [ I ] - Timeout for transaction (in milliseconds)
12804 inLen [ I ] - Reserved for future use (set to 0)
12805 pIn [ I ] - Reserved for future use (set to 0)
12806 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12807 contain, upon output the number of BYTEs copied
12808 to pOut
12809 pOut [ O ] - Output buffer
12810
12811 RETURN VALUE:
12812 ULONG - Return code
12813 ===========================================================================*/
12814 ULONG LOCGetExternalPowerConfig(
12815 GOBIHANDLE handle,
12816 ULONG to,
12817 ULONG inLen,
12818 const BYTE * pIn,
12819 ULONG * pOutLen,
12820 BYTE * pOut );
12821
12822 /*===========================================================================
12823 METHOD:
12824 LOCProvideConnectionStatus
12825
12826 DESCRIPTION:
12827 The function sends 'LOC/Provide Connection Status Request' (0x0053)
12828 and returns the response
12829
12830 PARAMETERS:
12831 handle [ I ] - Gobi interface handle
12832 to [ I ] - Timeout for transaction (in milliseconds)
12833 inLen [ I ] - Length of input buffer
12834 pIn [ I ] - Input buffer
12835 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12836 contain, upon output the number of BYTEs copied
12837 to pOut
12838 pOut [ O ] - Output buffer
12839
12840 RETURN VALUE:
12841 ULONG - Return code
12842 ===========================================================================*/
12843 ULONG LOCProvideConnectionStatus(
12844 GOBIHANDLE handle,
12845 ULONG to,
12846 ULONG inLen,
12847 const BYTE * pIn,
12848 ULONG * pOutLen,
12849 BYTE * pOut );
12850
12851 /*===========================================================================
12852 METHOD:
12853 LOCSetProtocolConfigParameters
12854
12855 DESCRIPTION:
12856 The function sends 'LOC/Set Protocol Config Parameters Request' (0x0054)
12857 and returns the response
12858
12859 PARAMETERS:
12860 handle [ I ] - Gobi interface handle
12861 to [ I ] - Timeout for transaction (in milliseconds)
12862 inLen [ I ] - Length of input buffer
12863 pIn [ I ] - Input buffer
12864 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12865 contain, upon output the number of BYTEs copied
12866 to pOut
12867 pOut [ O ] - Output buffer
12868
12869 RETURN VALUE:
12870 ULONG - Return code
12871 ===========================================================================*/
12872 ULONG LOCSetProtocolConfigParameters(
12873 GOBIHANDLE handle,
12874 ULONG to,
12875 ULONG inLen,
12876 const BYTE * pIn,
12877 ULONG * pOutLen,
12878 BYTE * pOut );
12879
12880 /*===========================================================================
12881 METHOD:
12882 LOCGetProtocolConfigParameters
12883
12884 DESCRIPTION:
12885 The function sends 'LOC/Get Protocol Config Parameters Request' (0x0055)
12886 and returns the response
12887
12888 PARAMETERS:
12889 handle [ I ] - Gobi interface handle
12890 to [ I ] - Timeout for transaction (in milliseconds)
12891 inLen [ I ] - Length of input buffer
12892 pIn [ I ] - Input buffer
12893 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12894 contain, upon output the number of BYTEs copied
12895 to pOut
12896 pOut [ O ] - Output buffer
12897
12898 RETURN VALUE:
12899 ULONG - Return code
12900 ===========================================================================*/
12901 ULONG LOCGetProtocolConfigParameters(
12902 GOBIHANDLE handle,
12903 ULONG to,
12904 ULONG inLen,
12905 const BYTE * pIn,
12906 ULONG * pOutLen,
12907 BYTE * pOut );
12908
12909 /*===========================================================================
12910 METHOD:
12911 LOCSetSensorControlConfig
12912
12913 DESCRIPTION:
12914 The function sends 'LOC/Set Sensor Control Config Request' (0x0056)
12915 and returns the response
12916
12917 PARAMETERS:
12918 handle [ I ] - Gobi interface handle
12919 to [ I ] - Timeout for transaction (in milliseconds)
12920 inLen [ I ] - Length of input buffer
12921 pIn [ I ] - Input buffer
12922 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12923 contain, upon output the number of BYTEs copied
12924 to pOut
12925 pOut [ O ] - Output buffer
12926
12927 RETURN VALUE:
12928 ULONG - Return code
12929 ===========================================================================*/
12930 ULONG LOCSetSensorControlConfig(
12931 GOBIHANDLE handle,
12932 ULONG to,
12933 ULONG inLen,
12934 const BYTE * pIn,
12935 ULONG * pOutLen,
12936 BYTE * pOut );
12937
12938 /*===========================================================================
12939 METHOD:
12940 LOCGetSensorControlConfig
12941
12942 DESCRIPTION:
12943 The function sends 'LOC/Get Sensor Control Config Request' (0x0057)
12944 and returns the response
12945
12946 PARAMETERS:
12947 handle [ I ] - Gobi interface handle
12948 to [ I ] - Timeout for transaction (in milliseconds)
12949 inLen [ I ] - Reserved for future use (set to 0)
12950 pIn [ I ] - Reserved for future use (set to 0)
12951 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12952 contain, upon output the number of BYTEs copied
12953 to pOut
12954 pOut [ O ] - Output buffer
12955
12956 RETURN VALUE:
12957 ULONG - Return code
12958 ===========================================================================*/
12959 ULONG LOCGetSensorControlConfig(
12960 GOBIHANDLE handle,
12961 ULONG to,
12962 ULONG inLen,
12963 const BYTE * pIn,
12964 ULONG * pOutLen,
12965 BYTE * pOut );
12966
12967 /*===========================================================================
12968 METHOD:
12969 LOCSetSensorProperties
12970
12971 DESCRIPTION:
12972 The function sends 'LOC/Set Sensor Properties Request' (0x0058)
12973 and returns the response
12974
12975 PARAMETERS:
12976 handle [ I ] - Gobi interface handle
12977 to [ I ] - Timeout for transaction (in milliseconds)
12978 inLen [ I ] - Length of input buffer
12979 pIn [ I ] - Input buffer
12980 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
12981 contain, upon output the number of BYTEs copied
12982 to pOut
12983 pOut [ O ] - Output buffer
12984
12985 RETURN VALUE:
12986 ULONG - Return code
12987 ===========================================================================*/
12988 ULONG LOCSetSensorProperties(
12989 GOBIHANDLE handle,
12990 ULONG to,
12991 ULONG inLen,
12992 const BYTE * pIn,
12993 ULONG * pOutLen,
12994 BYTE * pOut );
12995
12996 /*===========================================================================
12997 METHOD:
12998 LOCGetSensorProperties
12999
13000 DESCRIPTION:
13001 The function sends 'LOC/Get Sensor Properties Request' (0x0059)
13002 and returns the response
13003
13004 PARAMETERS:
13005 handle [ I ] - Gobi interface handle
13006 to [ I ] - Timeout for transaction (in milliseconds)
13007 inLen [ I ] - Length of input buffer
13008 pIn [ I ] - Input buffer
13009 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13010 contain, upon output the number of BYTEs copied
13011 to pOut
13012 pOut [ O ] - Output buffer
13013
13014 RETURN VALUE:
13015 ULONG - Return code
13016 ===========================================================================*/
13017 ULONG LOCGetSensorProperties(
13018 GOBIHANDLE handle,
13019 ULONG to,
13020 ULONG inLen,
13021 const BYTE * pIn,
13022 ULONG * pOutLen,
13023 BYTE * pOut );
13024
13025 /*===========================================================================
13026 METHOD:
13027 LOCSetSensorPerformanceConfig
13028
13029 DESCRIPTION:
13030 The function sends 'LOC/Set Sensor Performance Config Request' (0x005A)
13031 and returns the response
13032
13033 PARAMETERS:
13034 handle [ I ] - Gobi interface handle
13035 to [ I ] - Timeout for transaction (in milliseconds)
13036 inLen [ I ] - Length of input buffer
13037 pIn [ I ] - Input buffer
13038 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13039 contain, upon output the number of BYTEs copied
13040 to pOut
13041 pOut [ O ] - Output buffer
13042
13043 RETURN VALUE:
13044 ULONG - Return code
13045 ===========================================================================*/
13046 ULONG LOCSetSensorPerformanceConfig(
13047 GOBIHANDLE handle,
13048 ULONG to,
13049 ULONG inLen,
13050 const BYTE * pIn,
13051 ULONG * pOutLen,
13052 BYTE * pOut );
13053
13054 /*===========================================================================
13055 METHOD:
13056 LOCGetSensorPerformanceConfig
13057
13058 DESCRIPTION:
13059 The function sends 'LOC/Get Sensor Performance Config Request' (0x005B)
13060 and returns the response
13061
13062 PARAMETERS:
13063 handle [ I ] - Gobi interface handle
13064 to [ I ] - Timeout for transaction (in milliseconds)
13065 inLen [ I ] - Reserved for future use (set to 0)
13066 pIn [ I ] - Reserved for future use (set to 0)
13067 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13068 contain, upon output the number of BYTEs copied
13069 to pOut
13070 pOut [ O ] - Output buffer
13071
13072 RETURN VALUE:
13073 ULONG - Return code
13074 ===========================================================================*/
13075 ULONG LOCGetSensorPerformanceConfig(
13076 GOBIHANDLE handle,
13077 ULONG to,
13078 ULONG inLen,
13079 const BYTE * pIn,
13080 ULONG * pOutLen,
13081 BYTE * pOut );
13082
13083 /*===========================================================================
13084 METHOD:
13085 LOCInjectSUPLCertificate
13086
13087 DESCRIPTION:
13088 The function sends 'LOC/Inject SUPL Certificate Request' (0x005C)
13089 and returns the response
13090
13091 PARAMETERS:
13092 handle [ I ] - Gobi interface handle
13093 to [ I ] - Timeout for transaction (in milliseconds)
13094 inLen [ I ] - Length of input buffer
13095 pIn [ I ] - Input buffer
13096 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13097 contain, upon output the number of BYTEs copied
13098 to pOut
13099 pOut [ O ] - Output buffer
13100
13101 RETURN VALUE:
13102 ULONG - Return code
13103 ===========================================================================*/
13104 ULONG LOCInjectSUPLCertificate(
13105 GOBIHANDLE handle,
13106 ULONG to,
13107 ULONG inLen,
13108 const BYTE * pIn,
13109 ULONG * pOutLen,
13110 BYTE * pOut );
13111
13112 /*===========================================================================
13113 METHOD:
13114 LOCDeleteSUPLCertificate
13115
13116 DESCRIPTION:
13117 The function sends 'LOC/Delete SUPL Certificate Request' (0x005D)
13118 and returns the response
13119
13120 PARAMETERS:
13121 handle [ I ] - Gobi interface handle
13122 to [ I ] - Timeout for transaction (in milliseconds)
13123 inLen [ I ] - Length of input buffer
13124 pIn [ I ] - Input buffer
13125 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13126 contain, upon output the number of BYTEs copied
13127 to pOut
13128 pOut [ O ] - Output buffer
13129
13130 RETURN VALUE:
13131 ULONG - Return code
13132 ===========================================================================*/
13133 ULONG LOCDeleteSUPLCertificate(
13134 GOBIHANDLE handle,
13135 ULONG to,
13136 ULONG inLen,
13137 const BYTE * pIn,
13138 ULONG * pOutLen,
13139 BYTE * pOut );
13140
13141 /*===========================================================================
13142 METHOD:
13143 LOCSetPositionEngineConfig
13144
13145 DESCRIPTION:
13146 The function sends 'LOC/Set Position Engine Config Request' (0x005E)
13147 and returns the response
13148
13149 PARAMETERS:
13150 handle [ I ] - Gobi interface handle
13151 to [ I ] - Timeout for transaction (in milliseconds)
13152 inLen [ I ] - Length of input buffer
13153 pIn [ I ] - Input buffer
13154 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13155 contain, upon output the number of BYTEs copied
13156 to pOut
13157 pOut [ O ] - Output buffer
13158
13159 RETURN VALUE:
13160 ULONG - Return code
13161 ===========================================================================*/
13162 ULONG LOCSetPositionEngineConfig(
13163 GOBIHANDLE handle,
13164 ULONG to,
13165 ULONG inLen,
13166 const BYTE * pIn,
13167 ULONG * pOutLen,
13168 BYTE * pOut );
13169
13170 /*===========================================================================
13171 METHOD:
13172 LOCGetPositionEngineConfig
13173
13174 DESCRIPTION:
13175 The function sends 'LOC/Get Position Engine Config Request' (0x005F)
13176 and returns the response
13177
13178 PARAMETERS:
13179 handle [ I ] - Gobi interface handle
13180 to [ I ] - Timeout for transaction (in milliseconds)
13181 inLen [ I ] - Length of input buffer
13182 pIn [ I ] - Input buffer
13183 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13184 contain, upon output the number of BYTEs copied
13185 to pOut
13186 pOut [ O ] - Output buffer
13187
13188 RETURN VALUE:
13189 ULONG - Return code
13190 ===========================================================================*/
13191 ULONG LOCGetPositionEngineConfig(
13192 GOBIHANDLE handle,
13193 ULONG to,
13194 ULONG inLen,
13195 const BYTE * pIn,
13196 ULONG * pOutLen,
13197 BYTE * pOut );
13198
13199 /*===========================================================================
13200 METHOD:
13201 LOCAddCircularGeofence
13202
13203 DESCRIPTION:
13204 The function sends 'LOC/Add Circular Geofence Request' (0x0063)
13205 and returns the response
13206
13207 PARAMETERS:
13208 handle [ I ] - Gobi interface handle
13209 to [ I ] - Timeout for transaction (in milliseconds)
13210 inLen [ I ] - Length of input buffer
13211 pIn [ I ] - Input buffer
13212 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13213 contain, upon output the number of BYTEs copied
13214 to pOut
13215 pOut [ O ] - Output buffer
13216
13217 RETURN VALUE:
13218 ULONG - Return code
13219 ===========================================================================*/
13220 ULONG LOCAddCircularGeofence(
13221 GOBIHANDLE handle,
13222 ULONG to,
13223 ULONG inLen,
13224 const BYTE * pIn,
13225 ULONG * pOutLen,
13226 BYTE * pOut );
13227
13228 /*===========================================================================
13229 METHOD:
13230 LOCDeleteGeofence
13231
13232 DESCRIPTION:
13233 The function sends 'LOC/Delete Geofence Request' (0x0064)
13234 and returns the response
13235
13236 PARAMETERS:
13237 handle [ I ] - Gobi interface handle
13238 to [ I ] - Timeout for transaction (in milliseconds)
13239 inLen [ I ] - Length of input buffer
13240 pIn [ I ] - Input buffer
13241 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13242 contain, upon output the number of BYTEs copied
13243 to pOut
13244 pOut [ O ] - Output buffer
13245
13246 RETURN VALUE:
13247 ULONG - Return code
13248 ===========================================================================*/
13249 ULONG LOCDeleteGeofence(
13250 GOBIHANDLE handle,
13251 ULONG to,
13252 ULONG inLen,
13253 const BYTE * pIn,
13254 ULONG * pOutLen,
13255 BYTE * pOut );
13256
13257 /*===========================================================================
13258 METHOD:
13259 LOCQueryGeofence
13260
13261 DESCRIPTION:
13262 The function sends 'LOC/Query Geofence Request' (0x0065)
13263 and returns the response
13264
13265 PARAMETERS:
13266 handle [ I ] - Gobi interface handle
13267 to [ I ] - Timeout for transaction (in milliseconds)
13268 inLen [ I ] - Length of input buffer
13269 pIn [ I ] - Input buffer
13270 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13271 contain, upon output the number of BYTEs copied
13272 to pOut
13273 pOut [ O ] - Output buffer
13274
13275 RETURN VALUE:
13276 ULONG - Return code
13277 ===========================================================================*/
13278 ULONG LOCQueryGeofence(
13279 GOBIHANDLE handle,
13280 ULONG to,
13281 ULONG inLen,
13282 const BYTE * pIn,
13283 ULONG * pOutLen,
13284 BYTE * pOut );
13285
13286 /*===========================================================================
13287 METHOD:
13288 LOCEditGeofence
13289
13290 DESCRIPTION:
13291 The function sends 'LOC/Edit Geofence Request' (0x0066)
13292 and returns the response
13293
13294 PARAMETERS:
13295 handle [ I ] - Gobi interface handle
13296 to [ I ] - Timeout for transaction (in milliseconds)
13297 inLen [ I ] - Length of input buffer
13298 pIn [ I ] - Input buffer
13299 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13300 contain, upon output the number of BYTEs copied
13301 to pOut
13302 pOut [ O ] - Output buffer
13303
13304 RETURN VALUE:
13305 ULONG - Return code
13306 ===========================================================================*/
13307 ULONG LOCEditGeofence(
13308 GOBIHANDLE handle,
13309 ULONG to,
13310 ULONG inLen,
13311 const BYTE * pIn,
13312 ULONG * pOutLen,
13313 BYTE * pOut );
13314
13315 /*===========================================================================
13316 METHOD:
13317 LOCGetBestAvailablePosition
13318
13319 DESCRIPTION:
13320 The function sends 'LOC/Get Best Available Position Request' (0x0067)
13321 and returns the response
13322
13323 PARAMETERS:
13324 handle [ I ] - Gobi interface handle
13325 to [ I ] - Timeout for transaction (in milliseconds)
13326 inLen [ I ] - Length of input buffer
13327 pIn [ I ] - Input buffer
13328 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13329 contain, upon output the number of BYTEs copied
13330 to pOut
13331 pOut [ O ] - Output buffer
13332
13333 RETURN VALUE:
13334 ULONG - Return code
13335 ===========================================================================*/
13336 ULONG LOCGetBestAvailablePosition(
13337 GOBIHANDLE handle,
13338 ULONG to,
13339 ULONG inLen,
13340 const BYTE * pIn,
13341 ULONG * pOutLen,
13342 BYTE * pOut );
13343
13344 /*===========================================================================
13345 METHOD:
13346 CATReset
13347
13348 DESCRIPTION:
13349 The function sends 'CAT/Reset Request' (0x0000)
13350 and returns the response
13351
13352 PARAMETERS:
13353 handle [ I ] - Gobi interface handle
13354 to [ I ] - Timeout for transaction (in milliseconds)
13355 inLen [ I ] - Reserved for future use (set to 0)
13356 pIn [ I ] - Reserved for future use (set to 0)
13357 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13358 contain, upon output the number of BYTEs copied
13359 to pOut
13360 pOut [ O ] - Output buffer
13361
13362 RETURN VALUE:
13363 ULONG - Return code
13364 ===========================================================================*/
13365 ULONG CATReset(
13366 GOBIHANDLE handle,
13367 ULONG to,
13368 ULONG inLen,
13369 const BYTE * pIn,
13370 ULONG * pOutLen,
13371 BYTE * pOut );
13372
13373 /*===========================================================================
13374 METHOD:
13375 CATSetEventReport
13376
13377 DESCRIPTION:
13378 The function sends 'CAT/Set Event Report Request' (0x0001)
13379 and returns the response
13380
13381 PARAMETERS:
13382 handle [ I ] - Gobi interface handle
13383 to [ I ] - Timeout for transaction (in milliseconds)
13384 inLen [ I ] - Length of input buffer
13385 pIn [ I ] - Input buffer
13386 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13387 contain, upon output the number of BYTEs copied
13388 to pOut
13389 pOut [ O ] - Output buffer
13390
13391 RETURN VALUE:
13392 ULONG - Return code
13393 ===========================================================================*/
13394 ULONG CATSetEventReport(
13395 GOBIHANDLE handle,
13396 ULONG to,
13397 ULONG inLen,
13398 const BYTE * pIn,
13399 ULONG * pOutLen,
13400 BYTE * pOut );
13401
13402 /*===========================================================================
13403 METHOD:
13404 CATGetServiceState
13405
13406 DESCRIPTION:
13407 The function sends 'CAT/Get Service State Request' (0x0020)
13408 and returns the response
13409
13410 PARAMETERS:
13411 handle [ I ] - Gobi interface handle
13412 to [ I ] - Timeout for transaction (in milliseconds)
13413 inLen [ I ] - Reserved for future use (set to 0)
13414 pIn [ I ] - Reserved for future use (set to 0)
13415 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13416 contain, upon output the number of BYTEs copied
13417 to pOut
13418 pOut [ O ] - Output buffer
13419
13420 RETURN VALUE:
13421 ULONG - Return code
13422 ===========================================================================*/
13423 ULONG CATGetServiceState(
13424 GOBIHANDLE handle,
13425 ULONG to,
13426 ULONG inLen,
13427 const BYTE * pIn,
13428 ULONG * pOutLen,
13429 BYTE * pOut );
13430
13431 /*===========================================================================
13432 METHOD:
13433 CATSendTerminalResponse
13434
13435 DESCRIPTION:
13436 The function sends 'CAT/Send Terminal Response Request' (0x0021)
13437 and returns the response
13438
13439 PARAMETERS:
13440 handle [ I ] - Gobi interface handle
13441 to [ I ] - Timeout for transaction (in milliseconds)
13442 inLen [ I ] - Length of input buffer
13443 pIn [ I ] - Input buffer
13444 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13445 contain, upon output the number of BYTEs copied
13446 to pOut
13447 pOut [ O ] - Output buffer
13448
13449 RETURN VALUE:
13450 ULONG - Return code
13451 ===========================================================================*/
13452 ULONG CATSendTerminalResponse(
13453 GOBIHANDLE handle,
13454 ULONG to,
13455 ULONG inLen,
13456 const BYTE * pIn,
13457 ULONG * pOutLen,
13458 BYTE * pOut );
13459
13460 /*===========================================================================
13461 METHOD:
13462 CATEnvelopeCommand
13463
13464 DESCRIPTION:
13465 The function sends 'CAT/Envelope Command Request' (0x0022)
13466 and returns the response
13467
13468 PARAMETERS:
13469 handle [ I ] - Gobi interface handle
13470 to [ I ] - Timeout for transaction (in milliseconds)
13471 inLen [ I ] - Length of input buffer
13472 pIn [ I ] - Input buffer
13473 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13474 contain, upon output the number of BYTEs copied
13475 to pOut
13476 pOut [ O ] - Output buffer
13477
13478 RETURN VALUE:
13479 ULONG - Return code
13480 ===========================================================================*/
13481 ULONG CATEnvelopeCommand(
13482 GOBIHANDLE handle,
13483 ULONG to,
13484 ULONG inLen,
13485 const BYTE * pIn,
13486 ULONG * pOutLen,
13487 BYTE * pOut );
13488
13489 /*===========================================================================
13490 METHOD:
13491 CATGetEventReport
13492
13493 DESCRIPTION:
13494 The function sends 'CAT/Get Event Report Request' (0x0023)
13495 and returns the response
13496
13497 PARAMETERS:
13498 handle [ I ] - Gobi interface handle
13499 to [ I ] - Timeout for transaction (in milliseconds)
13500 inLen [ I ] - Length of input buffer
13501 pIn [ I ] - Input buffer
13502 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13503 contain, upon output the number of BYTEs copied
13504 to pOut
13505 pOut [ O ] - Output buffer
13506
13507 RETURN VALUE:
13508 ULONG - Return code
13509 ===========================================================================*/
13510 ULONG CATGetEventReport(
13511 GOBIHANDLE handle,
13512 ULONG to,
13513 ULONG inLen,
13514 const BYTE * pIn,
13515 ULONG * pOutLen,
13516 BYTE * pOut );
13517
13518 /*===========================================================================
13519 METHOD:
13520 CATSendDecodedTerminalResponse
13521
13522 DESCRIPTION:
13523 The function sends 'CAT/Send Decoded Terminal Response Request' (0x0024)
13524 and returns the response
13525
13526 PARAMETERS:
13527 handle [ I ] - Gobi interface handle
13528 to [ I ] - Timeout for transaction (in milliseconds)
13529 inLen [ I ] - Length of input buffer
13530 pIn [ I ] - Input buffer
13531 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13532 contain, upon output the number of BYTEs copied
13533 to pOut
13534 pOut [ O ] - Output buffer
13535
13536 RETURN VALUE:
13537 ULONG - Return code
13538 ===========================================================================*/
13539 ULONG CATSendDecodedTerminalResponse(
13540 GOBIHANDLE handle,
13541 ULONG to,
13542 ULONG inLen,
13543 const BYTE * pIn,
13544 ULONG * pOutLen,
13545 BYTE * pOut );
13546
13547 /*===========================================================================
13548 METHOD:
13549 CATSendDecodedEnvelopeCommand
13550
13551 DESCRIPTION:
13552 The function sends 'CAT/Send Decoded Envelope Command Request' (0x0025)
13553 and returns the response
13554
13555 PARAMETERS:
13556 handle [ I ] - Gobi interface handle
13557 to [ I ] - Timeout for transaction (in milliseconds)
13558 inLen [ I ] - Length of input buffer
13559 pIn [ I ] - Input buffer
13560 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13561 contain, upon output the number of BYTEs copied
13562 to pOut
13563 pOut [ O ] - Output buffer
13564
13565 RETURN VALUE:
13566 ULONG - Return code
13567 ===========================================================================*/
13568 ULONG CATSendDecodedEnvelopeCommand(
13569 GOBIHANDLE handle,
13570 ULONG to,
13571 ULONG inLen,
13572 const BYTE * pIn,
13573 ULONG * pOutLen,
13574 BYTE * pOut );
13575
13576 /*===========================================================================
13577 METHOD:
13578 CATEventConfirmation
13579
13580 DESCRIPTION:
13581 The function sends 'CAT/Event Confirmation Request' (0x0026)
13582 and returns the response
13583
13584 PARAMETERS:
13585 handle [ I ] - Gobi interface handle
13586 to [ I ] - Timeout for transaction (in milliseconds)
13587 inLen [ I ] - Length of input buffer
13588 pIn [ I ] - Input buffer
13589 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13590 contain, upon output the number of BYTEs copied
13591 to pOut
13592 pOut [ O ] - Output buffer
13593
13594 RETURN VALUE:
13595 ULONG - Return code
13596 ===========================================================================*/
13597 ULONG CATEventConfirmation(
13598 GOBIHANDLE handle,
13599 ULONG to,
13600 ULONG inLen,
13601 const BYTE * pIn,
13602 ULONG * pOutLen,
13603 BYTE * pOut );
13604
13605 /*===========================================================================
13606 METHOD:
13607 CATSCWSOpenChannel
13608
13609 DESCRIPTION:
13610 The function sends 'CAT/SCWS Open Channel Request' (0x0027)
13611 and returns the response
13612
13613 PARAMETERS:
13614 handle [ I ] - Gobi interface handle
13615 to [ I ] - Timeout for transaction (in milliseconds)
13616 inLen [ I ] - Length of input buffer
13617 pIn [ I ] - Input buffer
13618 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13619 contain, upon output the number of BYTEs copied
13620 to pOut
13621 pOut [ O ] - Output buffer
13622
13623 RETURN VALUE:
13624 ULONG - Return code
13625 ===========================================================================*/
13626 ULONG CATSCWSOpenChannel(
13627 GOBIHANDLE handle,
13628 ULONG to,
13629 ULONG inLen,
13630 const BYTE * pIn,
13631 ULONG * pOutLen,
13632 BYTE * pOut );
13633
13634 /*===========================================================================
13635 METHOD:
13636 CATSCWSCloseChannel
13637
13638 DESCRIPTION:
13639 The function sends 'CAT/SCWS Close Channel Request' (0x0028)
13640 and returns the response
13641
13642 PARAMETERS:
13643 handle [ I ] - Gobi interface handle
13644 to [ I ] - Timeout for transaction (in milliseconds)
13645 inLen [ I ] - Length of input buffer
13646 pIn [ I ] - Input buffer
13647 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13648 contain, upon output the number of BYTEs copied
13649 to pOut
13650 pOut [ O ] - Output buffer
13651
13652 RETURN VALUE:
13653 ULONG - Return code
13654 ===========================================================================*/
13655 ULONG CATSCWSCloseChannel(
13656 GOBIHANDLE handle,
13657 ULONG to,
13658 ULONG inLen,
13659 const BYTE * pIn,
13660 ULONG * pOutLen,
13661 BYTE * pOut );
13662
13663 /*===========================================================================
13664 METHOD:
13665 CATSCWSSendData
13666
13667 DESCRIPTION:
13668 The function sends 'CAT/SCWS Send Data Request' (0x0029)
13669 and returns the response
13670
13671 PARAMETERS:
13672 handle [ I ] - Gobi interface handle
13673 to [ I ] - Timeout for transaction (in milliseconds)
13674 inLen [ I ] - Length of input buffer
13675 pIn [ I ] - Input buffer
13676 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13677 contain, upon output the number of BYTEs copied
13678 to pOut
13679 pOut [ O ] - Output buffer
13680
13681 RETURN VALUE:
13682 ULONG - Return code
13683 ===========================================================================*/
13684 ULONG CATSCWSSendData(
13685 GOBIHANDLE handle,
13686 ULONG to,
13687 ULONG inLen,
13688 const BYTE * pIn,
13689 ULONG * pOutLen,
13690 BYTE * pOut );
13691
13692 /*===========================================================================
13693 METHOD:
13694 CATSCWSDataAvailable
13695
13696 DESCRIPTION:
13697 The function sends 'CAT/SCWS Data Available Request' (0x002A)
13698 and returns the response
13699
13700 PARAMETERS:
13701 handle [ I ] - Gobi interface handle
13702 to [ I ] - Timeout for transaction (in milliseconds)
13703 inLen [ I ] - Length of input buffer
13704 pIn [ I ] - Input buffer
13705 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13706 contain, upon output the number of BYTEs copied
13707 to pOut
13708 pOut [ O ] - Output buffer
13709
13710 RETURN VALUE:
13711 ULONG - Return code
13712 ===========================================================================*/
13713 ULONG CATSCWSDataAvailable(
13714 GOBIHANDLE handle,
13715 ULONG to,
13716 ULONG inLen,
13717 const BYTE * pIn,
13718 ULONG * pOutLen,
13719 BYTE * pOut );
13720
13721 /*===========================================================================
13722 METHOD:
13723 CATSCWSChannelStatus
13724
13725 DESCRIPTION:
13726 The function sends 'CAT/SCWS Channel Status Request' (0x002B)
13727 and returns the response
13728
13729 PARAMETERS:
13730 handle [ I ] - Gobi interface handle
13731 to [ I ] - Timeout for transaction (in milliseconds)
13732 inLen [ I ] - Length of input buffer
13733 pIn [ I ] - Input buffer
13734 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13735 contain, upon output the number of BYTEs copied
13736 to pOut
13737 pOut [ O ] - Output buffer
13738
13739 RETURN VALUE:
13740 ULONG - Return code
13741 ===========================================================================*/
13742 ULONG CATSCWSChannelStatus(
13743 GOBIHANDLE handle,
13744 ULONG to,
13745 ULONG inLen,
13746 const BYTE * pIn,
13747 ULONG * pOutLen,
13748 BYTE * pOut );
13749
13750 /*===========================================================================
13751 METHOD:
13752 CATGetTerminalProfile
13753
13754 DESCRIPTION:
13755 The function sends 'CAT/Get Terminal Profile Request' (0x002C)
13756 and returns the response
13757
13758 PARAMETERS:
13759 handle [ I ] - Gobi interface handle
13760 to [ I ] - Timeout for transaction (in milliseconds)
13761 inLen [ I ] - Length of input buffer
13762 pIn [ I ] - Input buffer
13763 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13764 contain, upon output the number of BYTEs copied
13765 to pOut
13766 pOut [ O ] - Output buffer
13767
13768 RETURN VALUE:
13769 ULONG - Return code
13770 ===========================================================================*/
13771 ULONG CATGetTerminalProfile(
13772 GOBIHANDLE handle,
13773 ULONG to,
13774 ULONG inLen,
13775 const BYTE * pIn,
13776 ULONG * pOutLen,
13777 BYTE * pOut );
13778
13779 /*===========================================================================
13780 METHOD:
13781 CATSetConfiguration
13782
13783 DESCRIPTION:
13784 The function sends 'CAT/Set Configuration Request' (0x002D)
13785 and returns the response
13786
13787 PARAMETERS:
13788 handle [ I ] - Gobi interface handle
13789 to [ I ] - Timeout for transaction (in milliseconds)
13790 inLen [ I ] - Length of input buffer
13791 pIn [ I ] - Input buffer
13792 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13793 contain, upon output the number of BYTEs copied
13794 to pOut
13795 pOut [ O ] - Output buffer
13796
13797 RETURN VALUE:
13798 ULONG - Return code
13799 ===========================================================================*/
13800 ULONG CATSetConfiguration(
13801 GOBIHANDLE handle,
13802 ULONG to,
13803 ULONG inLen,
13804 const BYTE * pIn,
13805 ULONG * pOutLen,
13806 BYTE * pOut );
13807
13808 /*===========================================================================
13809 METHOD:
13810 CATGetConfiguration
13811
13812 DESCRIPTION:
13813 The function sends 'CAT/Get Configuration Request' (0x002E)
13814 and returns the response
13815
13816 PARAMETERS:
13817 handle [ I ] - Gobi interface handle
13818 to [ I ] - Timeout for transaction (in milliseconds)
13819 inLen [ I ] - Reserved for future use (set to 0)
13820 pIn [ I ] - Reserved for future use (set to 0)
13821 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13822 contain, upon output the number of BYTEs copied
13823 to pOut
13824 pOut [ O ] - Output buffer
13825
13826 RETURN VALUE:
13827 ULONG - Return code
13828 ===========================================================================*/
13829 ULONG CATGetConfiguration(
13830 GOBIHANDLE handle,
13831 ULONG to,
13832 ULONG inLen,
13833 const BYTE * pIn,
13834 ULONG * pOutLen,
13835 BYTE * pOut );
13836
13837 /*===========================================================================
13838 METHOD:
13839 RMSReset
13840
13841 DESCRIPTION:
13842 The function sends 'RMS/Reset Request' (0x0000)
13843 and returns the response
13844
13845 PARAMETERS:
13846 handle [ I ] - Gobi interface handle
13847 to [ I ] - Timeout for transaction (in milliseconds)
13848 inLen [ I ] - Reserved for future use (set to 0)
13849 pIn [ I ] - Reserved for future use (set to 0)
13850 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13851 contain, upon output the number of BYTEs copied
13852 to pOut
13853 pOut [ O ] - Output buffer
13854
13855 RETURN VALUE:
13856 ULONG - Return code
13857 ===========================================================================*/
13858 ULONG RMSReset(
13859 GOBIHANDLE handle,
13860 ULONG to,
13861 ULONG inLen,
13862 const BYTE * pIn,
13863 ULONG * pOutLen,
13864 BYTE * pOut );
13865
13866 /*===========================================================================
13867 METHOD:
13868 RMSGetSMSWake
13869
13870 DESCRIPTION:
13871 The function sends 'RMS/Get SMS Wake Request' (0x0020)
13872 and returns the response
13873
13874 PARAMETERS:
13875 handle [ I ] - Gobi interface handle
13876 to [ I ] - Timeout for transaction (in milliseconds)
13877 inLen [ I ] - Reserved for future use (set to 0)
13878 pIn [ I ] - Reserved for future use (set to 0)
13879 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13880 contain, upon output the number of BYTEs copied
13881 to pOut
13882 pOut [ O ] - Output buffer
13883
13884 RETURN VALUE:
13885 ULONG - Return code
13886 ===========================================================================*/
13887 ULONG RMSGetSMSWake(
13888 GOBIHANDLE handle,
13889 ULONG to,
13890 ULONG inLen,
13891 const BYTE * pIn,
13892 ULONG * pOutLen,
13893 BYTE * pOut );
13894
13895 /*===========================================================================
13896 METHOD:
13897 RMSSetSMSWake
13898
13899 DESCRIPTION:
13900 The function sends 'RMS/Set SMS Wake Request' (0x0021)
13901 and returns the response
13902
13903 PARAMETERS:
13904 handle [ I ] - Gobi interface handle
13905 to [ I ] - Timeout for transaction (in milliseconds)
13906 inLen [ I ] - Length of input buffer
13907 pIn [ I ] - Input buffer
13908 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13909 contain, upon output the number of BYTEs copied
13910 to pOut
13911 pOut [ O ] - Output buffer
13912
13913 RETURN VALUE:
13914 ULONG - Return code
13915 ===========================================================================*/
13916 ULONG RMSSetSMSWake(
13917 GOBIHANDLE handle,
13918 ULONG to,
13919 ULONG inLen,
13920 const BYTE * pIn,
13921 ULONG * pOutLen,
13922 BYTE * pOut );
13923
13924 /*===========================================================================
13925 METHOD:
13926 OMAReset
13927
13928 DESCRIPTION:
13929 The function sends 'OMA/Reset Request' (0x0000)
13930 and returns the response
13931
13932 PARAMETERS:
13933 handle [ I ] - Gobi interface handle
13934 to [ I ] - Timeout for transaction (in milliseconds)
13935 inLen [ I ] - Reserved for future use (set to 0)
13936 pIn [ I ] - Reserved for future use (set to 0)
13937 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13938 contain, upon output the number of BYTEs copied
13939 to pOut
13940 pOut [ O ] - Output buffer
13941
13942 RETURN VALUE:
13943 ULONG - Return code
13944 ===========================================================================*/
13945 ULONG OMAReset(
13946 GOBIHANDLE handle,
13947 ULONG to,
13948 ULONG inLen,
13949 const BYTE * pIn,
13950 ULONG * pOutLen,
13951 BYTE * pOut );
13952
13953 /*===========================================================================
13954 METHOD:
13955 OMASetEventReport
13956
13957 DESCRIPTION:
13958 The function sends 'OMA/Set Event Report Request' (0x0001)
13959 and returns the response
13960
13961 PARAMETERS:
13962 handle [ I ] - Gobi interface handle
13963 to [ I ] - Timeout for transaction (in milliseconds)
13964 inLen [ I ] - Length of input buffer
13965 pIn [ I ] - Input buffer
13966 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13967 contain, upon output the number of BYTEs copied
13968 to pOut
13969 pOut [ O ] - Output buffer
13970
13971 RETURN VALUE:
13972 ULONG - Return code
13973 ===========================================================================*/
13974 ULONG OMASetEventReport(
13975 GOBIHANDLE handle,
13976 ULONG to,
13977 ULONG inLen,
13978 const BYTE * pIn,
13979 ULONG * pOutLen,
13980 BYTE * pOut );
13981
13982 /*===========================================================================
13983 METHOD:
13984 OMAStartSession
13985
13986 DESCRIPTION:
13987 The function sends 'OMA/Start Session Request' (0x0020)
13988 and returns the response
13989
13990 PARAMETERS:
13991 handle [ I ] - Gobi interface handle
13992 to [ I ] - Timeout for transaction (in milliseconds)
13993 inLen [ I ] - Length of input buffer
13994 pIn [ I ] - Input buffer
13995 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
13996 contain, upon output the number of BYTEs copied
13997 to pOut
13998 pOut [ O ] - Output buffer
13999
14000 RETURN VALUE:
14001 ULONG - Return code
14002 ===========================================================================*/
14003 ULONG OMAStartSession(
14004 GOBIHANDLE handle,
14005 ULONG to,
14006 ULONG inLen,
14007 const BYTE * pIn,
14008 ULONG * pOutLen,
14009 BYTE * pOut );
14010
14011 /*===========================================================================
14012 METHOD:
14013 OMACancelSession
14014
14015 DESCRIPTION:
14016 The function sends 'OMA/Cancel Session Request' (0x0021)
14017 and returns the response
14018
14019 PARAMETERS:
14020 handle [ I ] - Gobi interface handle
14021 to [ I ] - Timeout for transaction (in milliseconds)
14022 inLen [ I ] - Reserved for future use (set to 0)
14023 pIn [ I ] - Reserved for future use (set to 0)
14024 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
14025 contain, upon output the number of BYTEs copied
14026 to pOut
14027 pOut [ O ] - Output buffer
14028
14029 RETURN VALUE:
14030 ULONG - Return code
14031 ===========================================================================*/
14032 ULONG OMACancelSession(
14033 GOBIHANDLE handle,
14034 ULONG to,
14035 ULONG inLen,
14036 const BYTE * pIn,
14037 ULONG * pOutLen,
14038 BYTE * pOut );
14039
14040 /*===========================================================================
14041 METHOD:
14042 OMAGetSessionInfo
14043
14044 DESCRIPTION:
14045 The function sends 'OMA/Get Session Info Request' (0x0022)
14046 and returns the response
14047
14048 PARAMETERS:
14049 handle [ I ] - Gobi interface handle
14050 to [ I ] - Timeout for transaction (in milliseconds)
14051 inLen [ I ] - Reserved for future use (set to 0)
14052 pIn [ I ] - Reserved for future use (set to 0)
14053 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
14054 contain, upon output the number of BYTEs copied
14055 to pOut
14056 pOut [ O ] - Output buffer
14057
14058 RETURN VALUE:
14059 ULONG - Return code
14060 ===========================================================================*/
14061 ULONG OMAGetSessionInfo(
14062 GOBIHANDLE handle,
14063 ULONG to,
14064 ULONG inLen,
14065 const BYTE * pIn,
14066 ULONG * pOutLen,
14067 BYTE * pOut );
14068
14069 /*===========================================================================
14070 METHOD:
14071 OMASendSelection
14072
14073 DESCRIPTION:
14074 The function sends 'OMA/Send Selection Request' (0x0023)
14075 and returns the response
14076
14077 PARAMETERS:
14078 handle [ I ] - Gobi interface handle
14079 to [ I ] - Timeout for transaction (in milliseconds)
14080 inLen [ I ] - Length of input buffer
14081 pIn [ I ] - Input buffer
14082 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
14083 contain, upon output the number of BYTEs copied
14084 to pOut
14085 pOut [ O ] - Output buffer
14086
14087 RETURN VALUE:
14088 ULONG - Return code
14089 ===========================================================================*/
14090 ULONG OMASendSelection(
14091 GOBIHANDLE handle,
14092 ULONG to,
14093 ULONG inLen,
14094 const BYTE * pIn,
14095 ULONG * pOutLen,
14096 BYTE * pOut );
14097
14098 /*===========================================================================
14099 METHOD:
14100 OMAGetFeatures
14101
14102 DESCRIPTION:
14103 The function sends 'OMA/Get Features Request' (0x0024)
14104 and returns the response
14105
14106 PARAMETERS:
14107 handle [ I ] - Gobi interface handle
14108 to [ I ] - Timeout for transaction (in milliseconds)
14109 inLen [ I ] - Reserved for future use (set to 0)
14110 pIn [ I ] - Reserved for future use (set to 0)
14111 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
14112 contain, upon output the number of BYTEs copied
14113 to pOut
14114 pOut [ O ] - Output buffer
14115
14116 RETURN VALUE:
14117 ULONG - Return code
14118 ===========================================================================*/
14119 ULONG OMAGetFeatures(
14120 GOBIHANDLE handle,
14121 ULONG to,
14122 ULONG inLen,
14123 const BYTE * pIn,
14124 ULONG * pOutLen,
14125 BYTE * pOut );
14126
14127 /*===========================================================================
14128 METHOD:
14129 OMASetFeatures
14130
14131 DESCRIPTION:
14132 The function sends 'OMA/Set Features Request' (0x0025)
14133 and returns the response
14134
14135 PARAMETERS:
14136 handle [ I ] - Gobi interface handle
14137 to [ I ] - Timeout for transaction (in milliseconds)
14138 inLen [ I ] - Length of input buffer
14139 pIn [ I ] - Input buffer
14140 pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can
14141 contain, upon output the number of BYTEs copied
14142 to pOut
14143 pOut [ O ] - Output buffer
14144
14145 RETURN VALUE:
14146 ULONG - Return code
14147 ===========================================================================*/
14148 ULONG OMASetFeatures(
14149 GOBIHANDLE handle,
14150 ULONG to,
14151 ULONG inLen,
14152 const BYTE * pIn,
14153 ULONG * pOutLen,
14154 BYTE * pOut );
14155