/*=========================================================================== FILE: GobiConnectionMgmtAPI.h DESCRIPTION: QUALCOMM Connection Management API for Gobi Copyright (c) 2012, Code Aurora Forum. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Code Aurora Forum nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ==========================================================================*/ #ifndef GOBI_TYPEDEFS #define GOBI_TYPEDEFS // Type Definitions typedef unsigned long ULONG; typedef unsigned long * ULONG_PTR; typedef unsigned long long ULONGLONG; typedef signed char INT8; typedef unsigned char UINT8; typedef signed short INT16; typedef unsigned short UINT16; typedef signed int INT32; typedef unsigned int UINT32; typedef unsigned char BYTE; typedef char CHAR; typedef unsigned short WORD; typedef unsigned short USHORT; typedef const char * LPCSTR; #ifdef WINDOWS typedef signed __int64 INT64; typedef unsigned __int64 UINT64; #else typedef signed long long INT64; typedef unsigned long long UINT64; #endif #endif /*=========================================================================*/ // Definitions /*=========================================================================*/ // Handle to Gobi API typedef ULONG_PTR GOBIHANDLE; #ifdef __cplusplus extern "C" { #endif // Geeneric callback function pointer typedef void (* tFNGenericCallback)( ULONG svcID, ULONG msgID, GOBIHANDLE handle, ULONG outLen, const BYTE * pOut ); #ifdef __cplusplus }; #endif /*=========================================================================*/ // Prototypes /*=========================================================================*/ /*=========================================================================== METHOD: GobiConnect DESCRIPTION: This function connects the CM API library to the specified Gobi device PARAMETERS: pQMIFile [ I ] - Device interface to connect to pServicesCount [I/O] - Upon input the number of QMI services to connect to, upon output the number of QMI services successfully connected to pServices [I/O] - Upon input the array of QMI service IDs to connect to, upon output the array of QMI service IDs successfully connected to pHandle [ O ] - The returned Gobi interface handle RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG GobiConnect( LPCSTR pInterface, ULONG * pServicesCount, ULONG * pServices, GOBIHANDLE * pHandle ); /*=========================================================================== METHOD: GobiCancel DESCRIPTION: This function cancels the most recent outstanding request for the specified QMI service PARAMETERS: handle [ I ] - Gobi interface handle svcID [ I ] - Service whose outstanding request is to be cancelled pTXID [ O ] - QMI transaction ID of outstanding request RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG GobiCancel( GOBIHANDLE handle, ULONG svcID, ULONG * pTXID ); /*=========================================================================== METHOD: GobiDisconnect DESCRIPTION: This function disconnects the CM API library from the currently connected Gobi device PARAMETERS: handle [ I ] - Gobi interface handle RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG GobiDisconnect( GOBIHANDLE handle ); /*=========================================================================== METHOD: SetGenericCallback DESCRIPTION: This function enables/disables a generic callback PARAMETERS: handle [ I ] - Gobi interface handle svcID [ I ] - Service ID to monitor msgID [ I ] - Message ID to look for pCallback [ I ] - Callback function RETURN VALUE: ULONG ===========================================================================*/ ULONG SetGenericCallback( GOBIHANDLE handle, ULONG svcID, ULONG msgID, tFNGenericCallback pCallback ); /*=========================================================================== METHOD: WDSReset DESCRIPTION: The function sends 'WDS/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetEventReport DESCRIPTION: The function sends 'WDS/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSAbort DESCRIPTION: The function sends 'WDS/Abort Request' (0x0002) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSAbort( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetIndication DESCRIPTION: The function sends 'WDS/Set Indication Request' (0x0003) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetIndication( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSStartNetworkInterface DESCRIPTION: The function sends 'WDS/Start Network Interface Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSStartNetworkInterface( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSStopNetworkInterface DESCRIPTION: The function sends 'WDS/Stop Network Interface Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSStopNetworkInterface( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetPacketServiceStatus DESCRIPTION: The function sends 'WDS/Get Packet Service Status Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetPacketServiceStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetChannelRates DESCRIPTION: The function sends 'WDS/Get Channel Rates Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetChannelRates( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetPacketStatistics DESCRIPTION: The function sends 'WDS/Get Packet Statistics Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetPacketStatistics( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGoDormant DESCRIPTION: The function sends 'WDS/Go Dormant Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGoDormant( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGoActive DESCRIPTION: The function sends 'WDS/Go Active Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGoActive( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSCreateProfile DESCRIPTION: The function sends 'WDS/Create Profile Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSCreateProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSModifyProfile DESCRIPTION: The function sends 'WDS/Modify Profile Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSModifyProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSDeleteProfile DESCRIPTION: The function sends 'WDS/Delete Profile Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSDeleteProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetProfileList DESCRIPTION: The function sends 'WDS/Get Profile List Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetProfileList( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetProfileSettings DESCRIPTION: The function sends 'WDS/Get Profile Settings Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetProfileSettings( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDefaultSettings DESCRIPTION: The function sends 'WDS/Get Default Settings Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDefaultSettings( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCurrentSettings DESCRIPTION: The function sends 'WDS/Get Current Settings Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCurrentSettings( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetMIPMode DESCRIPTION: The function sends 'WDS/Set MIP Mode Request' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetMIPMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetMIPMode DESCRIPTION: The function sends 'WDS/Get MIP Mode Request' (0x002F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetMIPMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDormancy DESCRIPTION: The function sends 'WDS/Get Dormancy Request' (0x0030) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDormancy( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetAutoconnectSetting DESCRIPTION: The function sends 'WDS/Get Autoconnect Setting Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetAutoconnectSetting( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDataSessionDuration DESCRIPTION: The function sends 'WDS/Get Data Session Duration Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDataSessionDuration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetModemStatus DESCRIPTION: The function sends 'WDS/Get Modem Status Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetModemStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDataBearerTechnology DESCRIPTION: The function sends 'WDS/Get Data Bearer Technology Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDataBearerTechnology( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetModemInfo DESCRIPTION: The function sends 'WDS/Get Modem Info Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetModemInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetActiveMIPProfile DESCRIPTION: The function sends 'WDS/Get Active MIP Profile Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetActiveMIPProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetActiveMIPProfile DESCRIPTION: The function sends 'WDS/Set Active MIP Profile Request' (0x003D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetActiveMIPProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetMIPProfile DESCRIPTION: The function sends 'WDS/Get MIP Profile Request' (0x003E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetMIPProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetMIPProfile DESCRIPTION: The function sends 'WDS/Set MIP Profile Request' (0x003F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetMIPProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetMIPParameters DESCRIPTION: The function sends 'WDS/Get MIP Parameters Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetMIPParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetMIPParameters DESCRIPTION: The function sends 'WDS/Set MIP Parameters Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetMIPParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetLastMIPStatus DESCRIPTION: The function sends 'WDS/Get Last MIP Status Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetLastMIPStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetANAAAAuthenticationStatus DESCRIPTION: The function sends 'WDS/Get AN-AAA Authentication Status Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetANAAAAuthenticationStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCurrentDataBearerTechnology DESCRIPTION: The function sends 'WDS/Get Current Data Bearer Technology Request' (0x0044) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCurrentDataBearerTechnology( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCallList DESCRIPTION: The function sends 'WDS/Get Call List Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCallList( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCallRecord DESCRIPTION: The function sends 'WDS/Get Call Record Request' (0x0046) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCallRecord( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSClearCallList DESCRIPTION: The function sends 'WDS/Clear Call List Request' (0x0047) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSClearCallList( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCallListMaxSize DESCRIPTION: The function sends 'WDS/Get Call List Max Size Request' (0x0048) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCallListMaxSize( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDefaultProfileNumber DESCRIPTION: The function sends 'WDS/Get Default Profile Number Request' (0x0049) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDefaultProfileNumber( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetDefaultProfileNumber DESCRIPTION: The function sends 'WDS/Set Default Profile Number Request' (0x004A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetDefaultProfileNumber( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSResetProfile DESCRIPTION: The function sends 'WDS/Reset Profile Request' (0x004B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSResetProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSResetProfileParamToInvalid DESCRIPTION: The function sends 'WDS/Reset Profile Param To Invalid Request' (0x004C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSResetProfileParamToInvalid( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetIPFamilyPreference DESCRIPTION: The function sends 'WDS/Set IP Family Preference Request' (0x004D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetIPFamilyPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetFMCTunnelParameters DESCRIPTION: The function sends 'WDS/Set FMC Tunnel Parameters Request' (0x004E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetFMCTunnelParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSClearFMCTunnelParameters DESCRIPTION: The function sends 'WDS/Clear FMC Tunnel Parameters Request' (0x004F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSClearFMCTunnelParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetFMCTunnelParameters DESCRIPTION: The function sends 'WDS/Get FMC Tunnel Parameters Request' (0x0050) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetFMCTunnelParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetAutoconnectSetting DESCRIPTION: The function sends 'WDS/Set Autoconnect Setting Request' (0x0051) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetAutoconnectSetting( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDNSSetting DESCRIPTION: The function sends 'WDS/Get DNS Setting Request' (0x0052) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDNSSetting( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetDNSSetting DESCRIPTION: The function sends 'WDS/Set DNS Setting Request' (0x0053) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetDNSSetting( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCDMAPreDormancySettings DESCRIPTION: The function sends 'WDS/Get CDMA Pre-Dormancy Settings Request' (0x0054) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCDMAPreDormancySettings( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetCAMTimer DESCRIPTION: The function sends 'WDS/Set CAM Timer Request' (0x0055) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetCAMTimer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCAMTimer DESCRIPTION: The function sends 'WDS/Get CAM Timer Request' (0x0056) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCAMTimer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetSCRM DESCRIPTION: The function sends 'WDS/Set SCRM Request' (0x0057) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetSCRM( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetSCRM DESCRIPTION: The function sends 'WDS/Get SCRM Request' (0x0058) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetSCRM( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetRDUD DESCRIPTION: The function sends 'WDS/Set RDUD Request' (0x0059) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetRDUD( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetRDUD DESCRIPTION: The function sends 'WDS/Get RDUD Request' (0x005A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetRDUD( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetSIPMIPCallType DESCRIPTION: The function sends 'WDS/Get SIP/MIP Call Type Request' (0x005B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetSIPMIPCallType( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetEVDOPageMonitorPeriod DESCRIPTION: The function sends 'WDS/Set EV-DO Page Monitor Period Request' (0x005C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetEVDOPageMonitorPeriod( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetEVDOLongSleep DESCRIPTION: The function sends 'WDS/Set EV-DO Long Sleep Request' (0x005D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetEVDOLongSleep( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetEVDOPageMonitorPeriod DESCRIPTION: The function sends 'WDS/Get EV-DO Page Monitor Period Request' (0x005E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetEVDOPageMonitorPeriod( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCallThrottleInfo DESCRIPTION: The function sends 'WDS/Get Call Throttle Info Request' (0x005F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCallThrottleInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetNSAPI DESCRIPTION: The function sends 'WDS/Get NSAPI Request' (0x0060) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetNSAPI( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetDUNCallControlPreference DESCRIPTION: The function sends 'WDS/Set DUN Call Control Preference Request' (0x0061) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetDUNCallControlPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetDUNCallControlInfo DESCRIPTION: The function sends 'WDS/Get DUN Call Control Info Request' (0x0062) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetDUNCallControlInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSSetDUNCallControlEventReport DESCRIPTION: The function sends 'WDS/Set DUN Call Control Event Report Request' (0x0063) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSSetDUNCallControlEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSPendingDUNCallControl DESCRIPTION: The function sends 'WDS/Pending DUN Call Control Request' (0x0064) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSPendingDUNCallControl( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSEMBMSTMGIActivate DESCRIPTION: The function sends 'WDS/EMBMS TMGI Activate Request' (0x0065) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSEMBMSTMGIActivate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSEMBMSTMGIDeactivate DESCRIPTION: The function sends 'WDS/EMBMS TMGI Deactivate Request' (0x0066) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSEMBMSTMGIDeactivate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSEMBMSTMGIListQuery DESCRIPTION: The function sends 'WDS/EMBMS TMGI List Query Request' (0x0067) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSEMBMSTMGIListQuery( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetPreferredDataSystem DESCRIPTION: The function sends 'WDS/Get Preferred Data System Request' (0x0069) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetPreferredDataSystem( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetLastDataCallStatus DESCRIPTION: The function sends 'WDS/Get Last Data Call Status Request' (0x006A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetLastDataCallStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetCurrentDataSystems DESCRIPTION: The function sends 'WDS/Get Current Data Systems Request' (0x006B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetCurrentDataSystems( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetPDNThrottleInfo DESCRIPTION: The function sends 'WDS/Get PDN Throttle Info Request' (0x006C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetPDNThrottleInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetLTEAttachParameters DESCRIPTION: The function sends 'WDS/Get LTE Attach Parameters Request' (0x0085) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetLTEAttachParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSResetPacketStatistics DESCRIPTION: The function sends 'WDS/Reset Packet Statistics Request' (0x0086) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSResetPacketStatistics( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WDSGetFlowControlStatus DESCRIPTION: The function sends 'WDS/Get Flow Control Status Request' (0x0087) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WDSGetFlowControlStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSReset DESCRIPTION: The function sends 'DMS/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSSetEventReport DESCRIPTION: The function sends 'DMS/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSSetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetDeviceCapabilities DESCRIPTION: The function sends 'DMS/Get Device Capabilities Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetDeviceCapabilities( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetDeviceManfacturer DESCRIPTION: The function sends 'DMS/Get Device Manfacturer Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetDeviceManfacturer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetDeviceModel DESCRIPTION: The function sends 'DMS/Get Device Model Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetDeviceModel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetDeviceRevision DESCRIPTION: The function sends 'DMS/Get Device Revision Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetDeviceRevision( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetDeviceVoiceNumber DESCRIPTION: The function sends 'DMS/Get Device Voice Number Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetDeviceVoiceNumber( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetDeviceSerialNumbers DESCRIPTION: The function sends 'DMS/Get Device Serial Numbers Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetDeviceSerialNumbers( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetPowerState DESCRIPTION: The function sends 'DMS/Get Power State Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetPowerState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMSetPINProtection DESCRIPTION: The function sends 'DMS/UIM Set PIN Protection Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMSetPINProtection( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMVerifyPIN DESCRIPTION: The function sends 'DMS/UIM Verify PIN Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMVerifyPIN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMUnblockPIN DESCRIPTION: The function sends 'DMS/UIM Unblock PIN Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMUnblockPIN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMChangePIN DESCRIPTION: The function sends 'DMS/UIM Change PIN Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMChangePIN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMGetPINStatus DESCRIPTION: The function sends 'DMS/UIM Get PIN Status Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMGetPINStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetHardwareRevision DESCRIPTION: The function sends 'DMS/Get Hardware Revision Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetHardwareRevision( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetOperatingMode DESCRIPTION: The function sends 'DMS/Get Operating Mode Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetOperatingMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSSetOperatingMode DESCRIPTION: The function sends 'DMS/Set Operating Mode Request' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSSetOperatingMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetTimestamp DESCRIPTION: The function sends 'DMS/Get Timestamp Request' (0x002F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetTimestamp( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetPRLVersion DESCRIPTION: The function sends 'DMS/Get PRL Version Request' (0x0030) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetPRLVersion( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetActivationState DESCRIPTION: The function sends 'DMS/Get Activation State Request' (0x0031) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetActivationState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSActivateAutomatic DESCRIPTION: The function sends 'DMS/Activate Automatic Request' (0x0032) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSActivateAutomatic( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSActivateManual DESCRIPTION: The function sends 'DMS/Activate Manual Request' (0x0033) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSActivateManual( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetLockState DESCRIPTION: The function sends 'DMS/Get Lock State Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetLockState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSSetLockState DESCRIPTION: The function sends 'DMS/Set Lock State Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSSetLockState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSSetLockCode DESCRIPTION: The function sends 'DMS/Set Lock Code Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSSetLockCode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSReadUserData DESCRIPTION: The function sends 'DMS/Read User Data Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSReadUserData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSWriteUserData DESCRIPTION: The function sends 'DMS/Write User Data Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSWriteUserData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSReadERIData DESCRIPTION: The function sends 'DMS/Read ERI Data Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSReadERIData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSResetFactoryDefaults DESCRIPTION: The function sends 'DMS/Reset Factory Defaults Request' (0x003A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSResetFactoryDefaults( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSValidateSPC DESCRIPTION: The function sends 'DMS/Validate SPC Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSValidateSPC( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMGetICCID DESCRIPTION: The function sends 'DMS/UIM Get ICCID Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMGetICCID( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMGetHostLockID DESCRIPTION: The function sends 'DMS/UIM Get Host Lock ID Request' (0x003F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMGetHostLockID( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMGetControlKeyStatus DESCRIPTION: The function sends 'DMS/UIM Get Control Key Status Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMGetControlKeyStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMSetControlKeyProtection DESCRIPTION: The function sends 'DMS/UIM Set Control Key Protection Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMSetControlKeyProtection( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSUIMUnblockControlKey DESCRIPTION: The function sends 'DMS/UIM Unblock Control Key Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSUIMUnblockControlKey( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetIMSI DESCRIPTION: The function sends 'DMS/Get IMSI Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetIMSI( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetUIMState DESCRIPTION: The function sends 'DMS/Get UIM State Request' (0x0044) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetUIMState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetBandCapabilities DESCRIPTION: The function sends 'DMS/Get Band Capabilities Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetBandCapabilities( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetFactorySerialNumber DESCRIPTION: The function sends 'DMS/Get Factory Serial Number Request' (0x0046) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetFactorySerialNumber( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSSetDeviceTime DESCRIPTION: The function sends 'DMS/Set Device Time Request' (0x004B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSSetDeviceTime( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetSoftwareVersion DESCRIPTION: The function sends 'DMS/Get Software Version Request' (0x0051) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetSoftwareVersion( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSSetSPC DESCRIPTION: The function sends 'DMS/Set SPC Request' (0x0052) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSSetSPC( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: DMSGetCurrentPRLInfo DESCRIPTION: The function sends 'DMS/Get Current PRL Info Request' (0x0053) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG DMSGetCurrentPRLInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASReset DESCRIPTION: The function sends 'NAS/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASAbort DESCRIPTION: The function sends 'NAS/Abort Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASAbort( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetEventReport DESCRIPTION: The function sends 'NAS/Set Event Report Request' (0x0002) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetRegistrationEventReport DESCRIPTION: The function sends 'NAS/Set Registration Event Report Request' (0x0003) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetRegistrationEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetSignalStrength DESCRIPTION: The function sends 'NAS/Get Signal Strength Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetSignalStrength( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASPerformNetworkScan DESCRIPTION: The function sends 'NAS/Perform Network Scan Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASPerformNetworkScan( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASInitiateNetworkRegister DESCRIPTION: The function sends 'NAS/Initiate Network Register Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASInitiateNetworkRegister( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASInitiateAttach DESCRIPTION: The function sends 'NAS/Initiate Attach Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASInitiateAttach( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetServingSystem DESCRIPTION: The function sends 'NAS/Get Serving System Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetServingSystem( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetHomeNetwork DESCRIPTION: The function sends 'NAS/Get Home Network Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetHomeNetwork( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetPreferredNetworks DESCRIPTION: The function sends 'NAS/Get Preferred Networks Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetPreferredNetworks( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetPreferredNetworks DESCRIPTION: The function sends 'NAS/Set Preferred Networks Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetPreferredNetworks( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetForbiddenNetworks DESCRIPTION: The function sends 'NAS/Get Forbidden Networks Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetForbiddenNetworks( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetForbiddenNetworks DESCRIPTION: The function sends 'NAS/Set Forbidden Networks Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetForbiddenNetworks( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetTechnologyPreference DESCRIPTION: The function sends 'NAS/Set Technology Preference Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetTechnologyPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetTechnologyPreference DESCRIPTION: The function sends 'NAS/Get Technology Preference Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetTechnologyPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetACCOLC DESCRIPTION: The function sends 'NAS/Get ACCOLC Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetACCOLC( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetACCOLC DESCRIPTION: The function sends 'NAS/Set ACCOLC Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetACCOLC( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetSystemPreference DESCRIPTION: The function sends 'NAS/Get System Preference' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetSystemPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetNetworkParameters DESCRIPTION: The function sends 'NAS/Get Network Parameters Request' (0x002F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetNetworkParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetNetworkParameters DESCRIPTION: The function sends 'NAS/Set Network Parameters Request' (0x0030) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetNetworkParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetRFInfo DESCRIPTION: The function sends 'NAS/Get RF Info Request' (0x0031) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetRFInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetANAAAAuthenticationStatus DESCRIPTION: The function sends 'NAS/Get AN-AAA Authentication Status Request' (0x0032) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetANAAAAuthenticationStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetSystemSelectionPref DESCRIPTION: The function sends 'NAS/Set System Selection Pref Request' (0x0033) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetSystemSelectionPref( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetSystemSelectionPref DESCRIPTION: The function sends 'NAS/Get System Selection Pref Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetSystemSelectionPref( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetDDTMPreference DESCRIPTION: The function sends 'NAS/Set DDTM Preference Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetDDTMPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetDDTMPreference DESCRIPTION: The function sends 'NAS/Get DDTM Preference Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetDDTMPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetOperatorNameData DESCRIPTION: The function sends 'NAS/Get Operator Name Data Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetOperatorNameData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetCSPPLMNMode DESCRIPTION: The function sends 'NAS/Get CSP PLMN Mode Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetCSPPLMNMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASUpdateAKEY DESCRIPTION: The function sends 'NAS/Update AKEY Request' (0x003D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASUpdateAKEY( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGet3GPP2SubscriptionInfo DESCRIPTION: The function sends 'NAS/Get 3GPP2 Subscription Info Request' (0x003E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGet3GPP2SubscriptionInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSet3GPP2SubscriptionInfo DESCRIPTION: The function sends 'NAS/Set 3GPP2 Subscription Info Request' (0x003F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSet3GPP2SubscriptionInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetMobileCAIRevision DESCRIPTION: The function sends 'NAS/Get Mobile CAI Revision Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetMobileCAIRevision( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetRTREConfig DESCRIPTION: The function sends 'NAS/Get RTRE Config Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetRTREConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetRTREConfig DESCRIPTION: The function sends 'NAS/Set RTRE Config Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetRTREConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetCellLocationInfo DESCRIPTION: The function sends 'NAS/Get Cell Location Info Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetCellLocationInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetPLMNName DESCRIPTION: The function sends 'NAS/Get PLMN Name Request' (0x0044) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetPLMNName( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASBindSubscription DESCRIPTION: The function sends 'NAS/Bind Subscription Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASBindSubscription( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetModePref DESCRIPTION: The function sends 'NAS/Get Mode Pref Request' (0x0049) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetModePref( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetDualStandbyPreference DESCRIPTION: The function sends 'NAS/Set Dual Standby Preference Request' (0x004B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetDualStandbyPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetSystemInfo DESCRIPTION: The function sends 'NAS/Get System Info Request' (0x004D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetSystemInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetSignalInfo DESCRIPTION: The function sends 'NAS/Get Signal Info Request' (0x004F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetSignalInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASConfigureSignalInfo DESCRIPTION: The function sends 'NAS/Configure Signal Info Request' (0x0050) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASConfigureSignalInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetErrorRate DESCRIPTION: The function sends 'NAS/Get Error Rate Request' (0x0052) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetErrorRate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetEVDOProtocolSubtype DESCRIPTION: The function sends 'NAS/Get EV-DO Protocol Subtype Request' (0x0056) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetEVDOProtocolSubtype( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetEVDOColorCode DESCRIPTION: The function sends 'NAS/Get EV-DO Color Code Request' (0x0057) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetEVDOColorCode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetAcquisitionSystemMode DESCRIPTION: The function sends 'NAS/Get Acquisition System Mode Request' (0x0058) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetAcquisitionSystemMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASSetRXDiversity DESCRIPTION: The function sends 'NAS/Set RX Diversity Request' (0x0059) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASSetRXDiversity( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetRXTXInfo DESCRIPTION: The function sends 'NAS/Get RX/TX Info Request' (0x005A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetRXTXInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASUpdateAKEYExtended DESCRIPTION: The function sends 'NAS/Update A-KEY Extended Request' (0x005B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASUpdateAKEYExtended( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetDualStandbyPreference DESCRIPTION: The function sends 'NAS/Get Dual Standby Preference Request' (0x005C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetDualStandbyPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASDetachLTE DESCRIPTION: The function sends 'NAS/Detach LTE Request' (0x005D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASDetachLTE( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASBlockLTEPLMN DESCRIPTION: The function sends 'NAS/Block LTE PLMN Request' (0x005E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASBlockLTEPLMN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASUnblockLTEPLMN DESCRIPTION: The function sends 'NAS/Unblock LTE PLMN Request' (0x005F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASUnblockLTEPLMN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASResetLTEPLMNBlock DESCRIPTION: The function sends 'NAS/Reset LTE PLMN Block Request' (0x0060) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASResetLTEPLMNBlock( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASConfigureEMBMS DESCRIPTION: The function sends 'NAS/Configure EMBMS Request' (0x0062) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASConfigureEMBMS( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetEMBMSStatus DESCRIPTION: The function sends 'NAS/Get EMBMS Status Request' (0x0063) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetEMBMSStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetCDMAPositionInfo DESCRIPTION: The function sends 'NAS/Get CDMA Position Info Request' (0x0065) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetCDMAPositionInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASForceNetworkSearch DESCRIPTION: The function sends 'NAS/Force Network Search Request' (0x0067) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASForceNetworkSearch( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetManagedRoamingConfig DESCRIPTION: The function sends 'NAS/Get Managed Roaming Config Request' (0x0069) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetManagedRoamingConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: NASGetCentralizedEONSSupport DESCRIPTION: The function sends 'NAS/Get Centralized EONS Support Request' (0x006B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG NASGetCentralizedEONSSupport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSReset DESCRIPTION: The function sends 'WMS/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetEventReport DESCRIPTION: The function sends 'WMS/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSRawSend DESCRIPTION: The function sends 'WMS/Raw Send Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSRawSend( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSRawWrite DESCRIPTION: The function sends 'WMS/Raw Write Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSRawWrite( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSRawRead DESCRIPTION: The function sends 'WMS/Raw Read Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSRawRead( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSModifyTag DESCRIPTION: The function sends 'WMS/Modify Tag Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSModifyTag( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSDelete DESCRIPTION: The function sends 'WMS/Delete Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSDelete( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetMessageProtocol DESCRIPTION: The function sends 'WMS/Get Message Protocol Request' (0x0030) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetMessageProtocol( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSListMessages DESCRIPTION: The function sends 'WMS/List Messages Request' (0x0031) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSListMessages( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetRoutes DESCRIPTION: The function sends 'WMS/Set Routes Request' (0x0032) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetRoutes( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetRoutes DESCRIPTION: The function sends 'WMS/Get Routes Request' (0x0033) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetRoutes( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetSMSCAddress DESCRIPTION: The function sends 'WMS/Get SMSC Address Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetSMSCAddress( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetSMSCAddress DESCRIPTION: The function sends 'WMS/Set SMSC Address Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetSMSCAddress( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetStorageMaxSize DESCRIPTION: The function sends 'WMS/Get Storage Max Size Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetStorageMaxSize( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSendACK DESCRIPTION: The function sends 'WMS/Send ACK Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSendACK( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetRetryPeriod DESCRIPTION: The function sends 'WMS/Set Retry Period Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetRetryPeriod( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetRetryInterval DESCRIPTION: The function sends 'WMS/Set Retry Interval Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetRetryInterval( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetDCDisconnectTimer DESCRIPTION: The function sends 'WMS/Set DC Disconnect Timer Request' (0x003A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetDCDisconnectTimer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetMemoryStatus DESCRIPTION: The function sends 'WMS/Set Memory Status Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetMemoryStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetBroadcastActivation DESCRIPTION: The function sends 'WMS/Set Broadcast Activation Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetBroadcastActivation( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetBroadcastConfig DESCRIPTION: The function sends 'WMS/Set Broadcast Config Request' (0x003D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetBroadcastConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetBroadcastConfig DESCRIPTION: The function sends 'WMS/Get Broadcast Config Request' (0x003E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetBroadcastConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetDomainPreference DESCRIPTION: The function sends 'WMS/Get Domain Preference Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetDomainPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetDomainPreference DESCRIPTION: The function sends 'WMS/Set Domain Preference Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetDomainPreference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSendFromMemoryStore DESCRIPTION: The function sends 'WMS/Send From Memory Store Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSendFromMemoryStore( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetWaitingMessage DESCRIPTION: The function sends 'WMS/Get Waiting Message Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetWaitingMessage( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetPrimaryClient DESCRIPTION: The function sends 'WMS/Set Primary Client Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetPrimaryClient( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSIndicatorRegistration DESCRIPTION: The function sends 'WMS/Indicator Registration Request' (0x0047) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSIndicatorRegistration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetTransportLayerInfo DESCRIPTION: The function sends 'WMS/Get Transport Layer Info Request' (0x0048) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetTransportLayerInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetNetworkRegistrationInfo DESCRIPTION: The function sends 'WMS/Get Network Registration Info Request' (0x004A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetNetworkRegistrationInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSBindSubscription DESCRIPTION: The function sends 'WMS/Bind Subscription Request' (0x004C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSBindSubscription( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetIndicatorRegistration DESCRIPTION: The function sends 'WMS/Get Indicator Registration Request' (0x004D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetIndicatorRegistration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetSMSParameters DESCRIPTION: The function sends 'WMS/Get SMS Parameters Request' (0x004E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetSMSParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetSMSParameters DESCRIPTION: The function sends 'WMS/Set SMS Parameters Request' (0x004F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetSMSParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetDomainPreferenceConfig DESCRIPTION: The function sends 'WMS/Get Domain Preference Config Request' (0x0051) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetDomainPreferenceConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSSetDomainPreferenceConfig DESCRIPTION: The function sends 'WMS/Set Domain Preference Config Request' (0x0052) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSSetDomainPreferenceConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetRetryPeriod DESCRIPTION: The function sends 'WMS/Get Retry Period Request' (0x0053) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetRetryPeriod( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetRetryInterval DESCRIPTION: The function sends 'WMS/Get Retry Interval Request' (0x0054) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetRetryInterval( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetDCDisconnectTimer DESCRIPTION: The function sends 'WMS/Get DC Disconnect Timer Request' (0x0055) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetDCDisconnectTimer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetMemoryStatus DESCRIPTION: The function sends 'WMS/Get Memory Status Request' (0x0056) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetMemoryStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetPrimaryClient DESCRIPTION: The function sends 'WMS/Get Primary Client Request' (0x0057) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetPrimaryClient( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetSubscriptionBinding DESCRIPTION: The function sends 'WMS/Get Subscription Binding Request' (0x0058) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetSubscriptionBinding( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSAsyncRawSend DESCRIPTION: The function sends 'WMS/Async Raw Send Request' (0x0059) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSAsyncRawSend( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSAsyncSendACK DESCRIPTION: The function sends 'WMS/Async Send ACK Request' (0x005A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSAsyncSendACK( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSAsyncSendFromMemoryStore DESCRIPTION: The function sends 'WMS/Async Send From Memory Store Request' (0x005B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSAsyncSendFromMemoryStore( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: WMSGetServiceReadyStatus DESCRIPTION: The function sends 'WMS/Get Service Ready Status Request' (0x005C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG WMSGetServiceReadyStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSReset DESCRIPTION: The function sends 'PDS/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetEventReport DESCRIPTION: The function sends 'PDS/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetServiceState DESCRIPTION: The function sends 'PDS/Get Service State Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetServiceState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetServiceState DESCRIPTION: The function sends 'PDS/Set Service State Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetServiceState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSStartTrackingSession DESCRIPTION: The function sends 'PDS/Start Tracking Session Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSStartTrackingSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetTrackingSessionInfo DESCRIPTION: The function sends 'PDS/Get Tracking Session Info Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetTrackingSessionInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSFixPosition DESCRIPTION: The function sends 'PDS/Fix Position Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSFixPosition( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSEndTrackingSession DESCRIPTION: The function sends 'PDS/End Tracking Session Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSEndTrackingSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetNMEAConfig DESCRIPTION: The function sends 'PDS/Get NMEA Config Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetNMEAConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetNMEAConfig DESCRIPTION: The function sends 'PDS/Set NMEA Config Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetNMEAConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectTimeReference DESCRIPTION: The function sends 'PDS/Inject Time Reference Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectTimeReference( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetDefaults DESCRIPTION: The function sends 'PDS/Get Defaults Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetDefaults( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetDefaults DESCRIPTION: The function sends 'PDS/Set Defaults Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetDefaults( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetXTRAParameters DESCRIPTION: The function sends 'PDS/Get XTRA Parameters Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetXTRAParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetXTRAParameters DESCRIPTION: The function sends 'PDS/Set XTRA Parameters Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetXTRAParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSForceXTRADownload DESCRIPTION: The function sends 'PDS/Force XTRA Download Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSForceXTRADownload( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetAGPSConfig DESCRIPTION: The function sends 'PDS/Get AGPS Config Request' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetAGPSConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetAGPSConfig DESCRIPTION: The function sends 'PDS/Set AGPS Config Request' (0x002F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetAGPSConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetServiceAutoTrackingState DESCRIPTION: The function sends 'PDS/Get Service Auto-Tracking State Request' (0x0030) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetServiceAutoTrackingState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetServiceAutoTrackingState DESCRIPTION: The function sends 'PDS/Set Service Auto-Tracking State Request' (0x0031) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetServiceAutoTrackingState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetCOMPortAutoTrackingConfig DESCRIPTION: The function sends 'PDS/Get COM Port Auto-Tracking Config Request' (0x0032) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetCOMPortAutoTrackingConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetCOMPortAutoTrackingConfig DESCRIPTION: The function sends 'PDS/Set COM Port Auto-Tracking Config Request' (0x0033) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetCOMPortAutoTrackingConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSResetPDSData DESCRIPTION: The function sends 'PDS/Reset PDS Data Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSResetPDSData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSinglePositionFix DESCRIPTION: The function sends 'PDS/Single Position Fix Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSinglePositionFix( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetServiceVersion DESCRIPTION: The function sends 'PDS/Get Service Version Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetServiceVersion( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectXTRAData DESCRIPTION: The function sends 'PDS/Inject XTRA Data Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectXTRAData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectPositionData DESCRIPTION: The function sends 'PDS/Inject Position Data Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectPositionData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectWiFiPositionData DESCRIPTION: The function sends 'PDS/Inject Wi-Fi Position Data Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectWiFiPositionData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetSBASConfig DESCRIPTION: The function sends 'PDS/Get SBAS Config Request' (0x003A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetSBASConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSBASConfig DESCRIPTION: The function sends 'PDS/Set SBAS Config Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSBASConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSendNetworkInitiatedResponse DESCRIPTION: The function sends 'PDS/Send Network Initiated Response Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSendNetworkInitiatedResponse( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectAbsoluteTime DESCRIPTION: The function sends 'PDS/Inject Absolute Time Request' (0x003D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectAbsoluteTime( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectEFSData DESCRIPTION: The function sends 'PDS/Inject EFS Data Request' (0x003E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectEFSData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetDPOConfig DESCRIPTION: The function sends 'PDS/Get DPO Config Request' (0x003F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetDPOConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetDPOConfig DESCRIPTION: The function sends 'PDS/Set DPO Config Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetDPOConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetODPConfig DESCRIPTION: The function sends 'PDS/Get ODP Config Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetODPConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetODPConfig DESCRIPTION: The function sends 'PDS/Set ODP Config Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetODPConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSCancelSinglePositionFix DESCRIPTION: The function sends 'PDS/Cancel Single Position Fix Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSCancelSinglePositionFix( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetGPSState DESCRIPTION: The function sends 'PDS/Get GPS State Request' (0x0044) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetGPSState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetPPMEventReport DESCRIPTION: The function sends 'PDS/Set PPM Event Report Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetPPMEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSPIStreamingReport DESCRIPTION: The function sends 'PDS/Set SPI Streaming Report Request' (0x0046) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSPIStreamingReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSPIStatus DESCRIPTION: The function sends 'PDS/Set SPI Status Request' (0x0047) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSPIStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetPPMReportingState DESCRIPTION: The function sends 'PDS/Set PPM Reporting State Request' (0x0048) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetPPMReportingState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSForceReceiverOff DESCRIPTION: The function sends 'PDS/Force Receiver Off Request' (0x0049) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSForceReceiverOff( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetPositionMethodsState DESCRIPTION: The function sends 'PDS/Get Position Methods State Request' (0x0050) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetPositionMethodsState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetPositionMethodsState DESCRIPTION: The function sends 'PDS/Set Position Methods State Request' (0x0051) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetPositionMethodsState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectSensorData DESCRIPTION: The function sends 'PDS/Inject Sensor Data Request' (0x0052) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectSensorData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectTimeSyncData DESCRIPTION: The function sends 'PDS/Inject Time Sync Data Request' (0x0053) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectTimeSyncData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetSensorConfig DESCRIPTION: The function sends 'PDS/Get Sensor Config Request' (0x0054) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetSensorConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSensorConfig DESCRIPTION: The function sends 'PDS/Set Sensor Config Request' (0x0055) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSensorConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetSensorNavigation DESCRIPTION: The function sends 'PDS/Get Sensor Navigation Request' (0x0056) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetSensorNavigation( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetNavigationConfig DESCRIPTION: The function sends 'PDS/Set Navigation Config Request' (0x0057) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetNavigationConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetWLANBlanking DESCRIPTION: The function sends 'PDS/Set WLAN Blanking Request' (0x005A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetWLANBlanking( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSecurityChallengeReport DESCRIPTION: The function sends 'PDS/Set Security Challenge Report Request' (0x005B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSecurityChallengeReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSecurityChallenge DESCRIPTION: The function sends 'PDS/Set Security Challenge Request' (0x005C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSecurityChallenge( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSGetSecurityEncryptionConfig DESCRIPTION: The function sends 'PDS/Get Security Encryption Config Request' (0x005D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSGetSecurityEncryptionConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetSecurityUpdateRate DESCRIPTION: The function sends 'PDS/Set Security Update Rate Request' (0x005E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetSecurityUpdateRate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetCellDatabaseControl DESCRIPTION: The function sends 'PDS/Set Cell Database Control Request' (0x005F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetCellDatabaseControl( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectMotionData DESCRIPTION: The function sends 'PDS/Inject Motion Data Request' (0x0061) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectMotionData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetGNSSEngineErrorRecoveryReport DESCRIPTION: The function sends 'PDS/Set GNSS Engine Error Recovery Report Request' (0x0062) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetGNSSEngineErrorRecoveryReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSResetLocationService DESCRIPTION: The function sends 'PDS/Reset Location Service Request' (0x0063) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSResetLocationService( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSInjectTestData DESCRIPTION: The function sends 'PDS/Inject Test Data Request' (0x0064) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSInjectTestData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PDSSetGNSSRFConfig DESCRIPTION: The function sends 'PDS/Set GNSS RF Config Request' (0x0065) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PDSSetGNSSRFConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: AUTHStartEAPSession DESCRIPTION: The function sends 'AUTH/Start EAP Session Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG AUTHStartEAPSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: AUTHSendEAPPacket DESCRIPTION: The function sends 'AUTH/Send EAP Packet Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG AUTHSendEAPPacket( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: AUTHGetEAPSessionKeys DESCRIPTION: The function sends 'AUTH/Get EAP Session Keys Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG AUTHGetEAPSessionKeys( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: AUTHEndEAPSession DESCRIPTION: The function sends 'AUTH/End EAP Session Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG AUTHEndEAPSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: AUTHRunAKA DESCRIPTION: The function sends 'AUTH/Run AKA Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG AUTHRunAKA( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceIndicationRegistration DESCRIPTION: The function sends 'Voice/Indication Registration Request' (0x0003) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceIndicationRegistration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceCallOriginate DESCRIPTION: The function sends 'Voice/Call Originate Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceCallOriginate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceCallEnd DESCRIPTION: The function sends 'Voice/Call End Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceCallEnd( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceCallAnswer DESCRIPTION: The function sends 'Voice/Call Answer Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceCallAnswer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCallInfo DESCRIPTION: The function sends 'Voice/Get Call Info Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCallInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceSendFlash DESCRIPTION: The function sends 'Voice/Send Flash Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceSendFlash( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceBurstDTMF DESCRIPTION: The function sends 'Voice/Burst DTMF Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceBurstDTMF( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceStartContinuousDTMF DESCRIPTION: The function sends 'Voice/Start Continuous DTMF Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceStartContinuousDTMF( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceStopContinuousDTMF DESCRIPTION: The function sends 'Voice/Stop Continuous DTMF Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceStopContinuousDTMF( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceSetPreferredPrivacy DESCRIPTION: The function sends 'Voice/Set Preferred Privacy Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceSetPreferredPrivacy( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetAllCallInfo DESCRIPTION: The function sends 'Voice/Get All Call Info Request' (0x002F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetAllCallInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceManageCalls DESCRIPTION: The function sends 'Voice/Manage Calls Request' (0x0031) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceManageCalls( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceSetSupplementaryService DESCRIPTION: The function sends 'Voice/Set Supplementary Service Request' (0x0033) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceSetSupplementaryService( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCallWaiting DESCRIPTION: The function sends 'Voice/Get Call Waiting Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCallWaiting( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCallBarring DESCRIPTION: The function sends 'Voice/Get Call Barring Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCallBarring( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCLIP DESCRIPTION: The function sends 'Voice/Get CLIP Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCLIP( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCLIR DESCRIPTION: The function sends 'Voice/Get CLIR Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCLIR( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCallForwarding DESCRIPTION: The function sends 'Voice/Get Call Forwarding Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCallForwarding( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceSetCallBarringPassword DESCRIPTION: The function sends 'Voice/Set Call Barring Password Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceSetCallBarringPassword( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceInitiateUSSD DESCRIPTION: The function sends 'Voice/Initiate USSD Request' (0x003A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceInitiateUSSD( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceAnswerUSSD DESCRIPTION: The function sends 'Voice/Answer USSD Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceAnswerUSSD( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceCancelUSSD DESCRIPTION: The function sends 'Voice/Cancel USSD Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceCancelUSSD( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceSetConfig DESCRIPTION: The function sends 'Voice/Set Config Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceSetConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetConfig DESCRIPTION: The function sends 'Voice/Get Config Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceAsyncInitiateUSSD DESCRIPTION: The function sends 'Voice/Async Initiate USSD Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceAsyncInitiateUSSD( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceBindSubscription DESCRIPTION: The function sends 'Voice/Bind Subscription Request' (0x0044) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceBindSubscription( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceALSSetLineSwitching DESCRIPTION: The function sends 'Voice/ALS Set Line Switching Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceALSSetLineSwitching( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceALSSelectLine DESCRIPTION: The function sends 'Voice/ALS Select Line Request' (0x0046) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceALSSelectLine( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceAOCResetACM DESCRIPTION: The function sends 'Voice/AOC Reset ACM Request' (0x0047) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceAOCResetACM( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceAOCSetACMMaximum DESCRIPTION: The function sends 'Voice/AOC Set ACM Maximum Request' (0x0048) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceAOCSetACMMaximum( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceAOCGetCallMeterInfo DESCRIPTION: The function sends 'Voice/AOC Get Call Meter Info Request' (0x0049) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceAOCGetCallMeterInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCOLP DESCRIPTION: The function sends 'Voice/Get COLP Request' (0x004B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCOLP( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCOLR DESCRIPTION: The function sends 'Voice/Get COLR Request' (0x004C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCOLR( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceGetCNAP DESCRIPTION: The function sends 'Voice/Get CNAP Request' (0x004D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceGetCNAP( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: VoiceManageIPCalls DESCRIPTION: The function sends 'Voice/Manage IP Calls Request' (0x004E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG VoiceManageIPCalls( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2Reset DESCRIPTION: The function sends 'CAT2/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2Reset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SetEventReport DESCRIPTION: The function sends 'CAT2/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2GetServiceState DESCRIPTION: The function sends 'CAT2/Get Service State Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2GetServiceState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SendTerminalResponse DESCRIPTION: The function sends 'CAT2/Send Terminal Response Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SendTerminalResponse( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2EnvelopeCommand DESCRIPTION: The function sends 'CAT2/Envelope Command Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2EnvelopeCommand( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2GetEventReport DESCRIPTION: The function sends 'CAT2/Get Event Report Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2GetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SendDecodedTerminalResponse DESCRIPTION: The function sends 'CAT2/Send Decoded Terminal Response Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SendDecodedTerminalResponse( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SendDecodedEnvelopeCommand DESCRIPTION: The function sends 'CAT2/Send Decoded Envelope Command Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SendDecodedEnvelopeCommand( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2EventConfirmation DESCRIPTION: The function sends 'CAT2/Event Confirmation Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2EventConfirmation( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SCWSOpenChannel DESCRIPTION: The function sends 'CAT2/SCWS Open Channel Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SCWSOpenChannel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SCWSCloseChannel DESCRIPTION: The function sends 'CAT2/SCWS Close Channel Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SCWSCloseChannel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SCWSSendData DESCRIPTION: The function sends 'CAT2/SCWS Send Data Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SCWSSendData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SCWSDataAvailable DESCRIPTION: The function sends 'CAT2/SCWS Data Available Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SCWSDataAvailable( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SCWSChannelStatus DESCRIPTION: The function sends 'CAT2/SCWS Channel Status Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SCWSChannelStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2GetTerminalProfile DESCRIPTION: The function sends 'CAT2/Get Terminal Profile Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2GetTerminalProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2SetConfiguration DESCRIPTION: The function sends 'CAT2/Set Configuration Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2SetConfiguration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CAT2GetConfiguration DESCRIPTION: The function sends 'CAT2/Get Configuration Request' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CAT2GetConfiguration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMReset DESCRIPTION: The function sends 'UIM/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMReadTransparent DESCRIPTION: The function sends 'UIM/Read Transparent Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMReadTransparent( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMReadRecord DESCRIPTION: The function sends 'UIM/Read Record Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMReadRecord( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMWriteTransparent DESCRIPTION: The function sends 'UIM/Write Transparent Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMWriteTransparent( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMWriteRecord DESCRIPTION: The function sends 'UIM/Write Record Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMWriteRecord( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetFileAttributes DESCRIPTION: The function sends 'UIM/Get File Attributes Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetFileAttributes( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMSetPINProtection DESCRIPTION: The function sends 'UIM/Set PIN Protection Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMSetPINProtection( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMVerifyPIN DESCRIPTION: The function sends 'UIM/Verify PIN Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMVerifyPIN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMUnblockPIN DESCRIPTION: The function sends 'UIM/Unblock PIN Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMUnblockPIN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMChangePIN DESCRIPTION: The function sends 'UIM/Change PIN Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMChangePIN( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMDepersonalization DESCRIPTION: The function sends 'UIM/Depersonalization Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMDepersonalization( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMRefreshRegister DESCRIPTION: The function sends 'UIM/Refresh Register Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMRefreshRegister( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMRefreshOK DESCRIPTION: The function sends 'UIM/Refresh OK Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMRefreshOK( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMRefreshComplete DESCRIPTION: The function sends 'UIM/Refresh Complete Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMRefreshComplete( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetLastRefreshEvent DESCRIPTION: The function sends 'UIM/Get Last Refresh Event Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetLastRefreshEvent( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMEventRegistration DESCRIPTION: The function sends 'UIM/Event Registration Request' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMEventRegistration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetCardStatus DESCRIPTION: The function sends 'UIM/Get Card Status Request' (0x002F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetCardStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMPowerDown DESCRIPTION: The function sends 'UIM/Power Down Request' (0x0030) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMPowerDown( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMPowerUp DESCRIPTION: The function sends 'UIM/Power Up Request' (0x0031) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMPowerUp( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMAuthenticate DESCRIPTION: The function sends 'UIM/Authenticate Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMAuthenticate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMCloseSession DESCRIPTION: The function sends 'UIM/Close Session Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMCloseSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetServiceStatus DESCRIPTION: The function sends 'UIM/Get Service Status Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetServiceStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMSetServiceStatus DESCRIPTION: The function sends 'UIM/Set Service Status Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMSetServiceStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMChangeProvisioningSession DESCRIPTION: The function sends 'UIM/Change Provisioning Session Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMChangeProvisioningSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetLabel DESCRIPTION: The function sends 'UIM/Get Label Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetLabel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetConfiguration DESCRIPTION: The function sends 'UIM/Get Configuration Request' (0x003A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetConfiguration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMSendADPU DESCRIPTION: The function sends 'UIM/Send ADPU Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMSendADPU( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMSAPConnection DESCRIPTION: The function sends 'UIM/SAP Connection Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMSAPConnection( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMSAPRequest DESCRIPTION: The function sends 'UIM/SAP Request Request' (0x003D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMSAPRequest( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMLogicalChannel DESCRIPTION: The function sends 'UIM/Logical Channel Request' (0x003F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMLogicalChannel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMSubscriptionOK DESCRIPTION: The function sends 'UIM/Subscription OK Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMSubscriptionOK( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMGetATR DESCRIPTION: The function sends 'UIM/Get ATR Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMGetATR( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: UIMOpenLogicalChannel DESCRIPTION: The function sends 'UIM/Open Logical Channel Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG UIMOpenLogicalChannel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMSetIndicationRegistrationState DESCRIPTION: The function sends 'PBM/Set Indication Registration State Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMSetIndicationRegistrationState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetCapabilities DESCRIPTION: The function sends 'PBM/Get Capabilities Request' (0x0002) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetCapabilities( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetAllCapabilities DESCRIPTION: The function sends 'PBM/Get All Capabilities Request' (0x0003) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetAllCapabilities( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMReadRecords DESCRIPTION: The function sends 'PBM/Read Records Request' (0x0004) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMReadRecords( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMWriteRecord DESCRIPTION: The function sends 'PBM/Write Record Request' (0x0005) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMWriteRecord( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMDeleteRecord DESCRIPTION: The function sends 'PBM/Delete Record Request' (0x0006) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMDeleteRecord( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMDeleteAllRecords DESCRIPTION: The function sends 'PBM/Delete All Records Request' (0x0007) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMDeleteAllRecords( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMSearchRecords DESCRIPTION: The function sends 'PBM/Search Records Request' (0x0008) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMSearchRecords( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetEmergencyList DESCRIPTION: The function sends 'PBM/Get Emergency List Request' (0x000E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetEmergencyList( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetAllGroups DESCRIPTION: The function sends 'PBM/Get All Groups Request' (0x000F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetAllGroups( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMSetGroupInfo DESCRIPTION: The function sends 'PBM/Set Group Info Request' (0x0010) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMSetGroupInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetState DESCRIPTION: The function sends 'PBM/Get State Request' (0x0011) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMReadAllHiddenRecords DESCRIPTION: The function sends 'PBM/Read All Hidden Records Request' (0x0012) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMReadAllHiddenRecords( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetNextEmptyRecordID DESCRIPTION: The function sends 'PBM/Get Next Empty Record ID Request' (0x0014) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetNextEmptyRecordID( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetNextRecordID DESCRIPTION: The function sends 'PBM/Get Next Record ID Request' (0x0015) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetNextRecordID( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetAASList DESCRIPTION: The function sends 'PBM/Get AAS List Request' (0x0016) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetAASList( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMSetAAS DESCRIPTION: The function sends 'PBM/Set AAS Request' (0x0017) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMSetAAS( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMBindSubscription DESCRIPTION: The function sends 'PBM/Bind Subscription Request' (0x001A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMBindSubscription( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: PBMGetSubscription DESCRIPTION: The function sends 'PBM/Get Subscription Request' (0x001B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG PBMGetSubscription( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCClientRevision DESCRIPTION: The function sends 'LOC/Client Revision Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCClientRevision( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCRegisterEvents DESCRIPTION: The function sends 'LOC/Register Events Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCRegisterEvents( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCStart DESCRIPTION: The function sends 'LOC/Start Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCStart( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCStop DESCRIPTION: The function sends 'LOC/Stop Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCStop( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetServiceRevision DESCRIPTION: The function sends 'LOC/Get Service Revision Request' (0x0032) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetServiceRevision( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetFixCriteria DESCRIPTION: The function sends 'LOC/Get Fix Criteria Request' (0x0033) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetFixCriteria( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCProvideNIUserResponse DESCRIPTION: The function sends 'LOC/Provide NI User Response Request' (0x0034) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCProvideNIUserResponse( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectPredictedOrbitsData DESCRIPTION: The function sends 'LOC/Inject Predicted Orbits Data Request' (0x0035) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectPredictedOrbitsData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetPredictedOrbitsDataSource DESCRIPTION: The function sends 'LOC/Get Predicted Orbits Data Source Request' (0x0036) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetPredictedOrbitsDataSource( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetPredictedOrbitsDataValidity DESCRIPTION: The function sends 'LOC/Get Predicted Orbits Data Validity Request' (0x0037) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetPredictedOrbitsDataValidity( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectUTCTime DESCRIPTION: The function sends 'LOC/Inject UTC Time Request' (0x0038) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectUTCTime( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectPosition DESCRIPTION: The function sends 'LOC/Inject Position Request' (0x0039) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectPosition( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetEngineLock DESCRIPTION: The function sends 'LOC/Set Engine Lock Request' (0x003A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetEngineLock( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetEngineLock DESCRIPTION: The function sends 'LOC/Get Engine Lock Request' (0x003B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetEngineLock( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetSBASConfig DESCRIPTION: The function sends 'LOC/Set SBAS Config Request' (0x003C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetSBASConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetSBASConfig DESCRIPTION: The function sends 'LOC/Get SBAS Config Request' (0x003D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetSBASConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetNMEATypes DESCRIPTION: The function sends 'LOC/Set NMEA Types Request' (0x003E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetNMEATypes( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetNMEATypes DESCRIPTION: The function sends 'LOC/Get NMEA Types Request' (0x003F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetNMEATypes( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetLowPowerMode DESCRIPTION: The function sends 'LOC/Set Low Power Mode Request' (0x0040) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetLowPowerMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetLowPowerMode DESCRIPTION: The function sends 'LOC/Get Low Power Mode Request' (0x0041) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetLowPowerMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetLocationServer DESCRIPTION: The function sends 'LOC/Set Location Server Request' (0x0042) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetLocationServer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetLocationServer DESCRIPTION: The function sends 'LOC/Get Location Server Request' (0x0043) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetLocationServer( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCDeleteAssistData DESCRIPTION: The function sends 'LOC/Delete Assist Data Request' (0x0044) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCDeleteAssistData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetXTRATSessionControl DESCRIPTION: The function sends 'LOC/Set XTRA-T Session Control Request' (0x0045) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetXTRATSessionControl( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOC DESCRIPTION: The function sends 'LOC' (0x0046) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOC( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectWiFiPosition DESCRIPTION: The function sends 'LOC/Inject Wi-Fi Position Request' (0x0047) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectWiFiPosition( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCProvideWiFiStatus DESCRIPTION: The function sends 'LOC/Provide Wi-Fi Status Request' (0x0048) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCProvideWiFiStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetRegisteredEvents DESCRIPTION: The function sends 'LOC/Get Registered Events Request' (0x0049) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetRegisteredEvents( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetOperationMode DESCRIPTION: The function sends 'LOC/Set Operation Mode Request' (0x004A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetOperationMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetOperationMode DESCRIPTION: The function sends 'LOC/Get Operation Mode Request' (0x004B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetOperationMode( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetSPIStatus DESCRIPTION: The function sends 'LOC/Set SPI Status Request' (0x004C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetSPIStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectSensorData DESCRIPTION: The function sends 'LOC/Inject Sensor Data Request' (0x004D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectSensorData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectTimeSyncData DESCRIPTION: The function sends 'LOC/Inject Time Sync Data Request' (0x004E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectTimeSyncData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetCradleMountConfig DESCRIPTION: The function sends 'LOC/Set Cradle Mount Config Request' (0x004F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetCradleMountConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetCradleMountConfig DESCRIPTION: The function sends 'LOC/Get Cradle Mount Config Request' (0x0050) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetCradleMountConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetExternalPowerConfig DESCRIPTION: The function sends 'LOC/Set External Power Config Request' (0x0051) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetExternalPowerConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetExternalPowerConfig DESCRIPTION: The function sends 'LOC/Get External Power Config Request' (0x0052) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetExternalPowerConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCProvideConnectionStatus DESCRIPTION: The function sends 'LOC/Provide Connection Status Request' (0x0053) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCProvideConnectionStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetProtocolConfigParameters DESCRIPTION: The function sends 'LOC/Set Protocol Config Parameters Request' (0x0054) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetProtocolConfigParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetProtocolConfigParameters DESCRIPTION: The function sends 'LOC/Get Protocol Config Parameters Request' (0x0055) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetProtocolConfigParameters( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetSensorControlConfig DESCRIPTION: The function sends 'LOC/Set Sensor Control Config Request' (0x0056) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetSensorControlConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetSensorControlConfig DESCRIPTION: The function sends 'LOC/Get Sensor Control Config Request' (0x0057) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetSensorControlConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetSensorProperties DESCRIPTION: The function sends 'LOC/Set Sensor Properties Request' (0x0058) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetSensorProperties( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetSensorProperties DESCRIPTION: The function sends 'LOC/Get Sensor Properties Request' (0x0059) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetSensorProperties( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetSensorPerformanceConfig DESCRIPTION: The function sends 'LOC/Set Sensor Performance Config Request' (0x005A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetSensorPerformanceConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetSensorPerformanceConfig DESCRIPTION: The function sends 'LOC/Get Sensor Performance Config Request' (0x005B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetSensorPerformanceConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCInjectSUPLCertificate DESCRIPTION: The function sends 'LOC/Inject SUPL Certificate Request' (0x005C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCInjectSUPLCertificate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCDeleteSUPLCertificate DESCRIPTION: The function sends 'LOC/Delete SUPL Certificate Request' (0x005D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCDeleteSUPLCertificate( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCSetPositionEngineConfig DESCRIPTION: The function sends 'LOC/Set Position Engine Config Request' (0x005E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCSetPositionEngineConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetPositionEngineConfig DESCRIPTION: The function sends 'LOC/Get Position Engine Config Request' (0x005F) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetPositionEngineConfig( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCAddCircularGeofence DESCRIPTION: The function sends 'LOC/Add Circular Geofence Request' (0x0063) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCAddCircularGeofence( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCDeleteGeofence DESCRIPTION: The function sends 'LOC/Delete Geofence Request' (0x0064) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCDeleteGeofence( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCQueryGeofence DESCRIPTION: The function sends 'LOC/Query Geofence Request' (0x0065) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCQueryGeofence( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCEditGeofence DESCRIPTION: The function sends 'LOC/Edit Geofence Request' (0x0066) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCEditGeofence( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: LOCGetBestAvailablePosition DESCRIPTION: The function sends 'LOC/Get Best Available Position Request' (0x0067) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG LOCGetBestAvailablePosition( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATReset DESCRIPTION: The function sends 'CAT/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSetEventReport DESCRIPTION: The function sends 'CAT/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATGetServiceState DESCRIPTION: The function sends 'CAT/Get Service State Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATGetServiceState( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSendTerminalResponse DESCRIPTION: The function sends 'CAT/Send Terminal Response Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSendTerminalResponse( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATEnvelopeCommand DESCRIPTION: The function sends 'CAT/Envelope Command Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATEnvelopeCommand( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATGetEventReport DESCRIPTION: The function sends 'CAT/Get Event Report Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATGetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSendDecodedTerminalResponse DESCRIPTION: The function sends 'CAT/Send Decoded Terminal Response Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSendDecodedTerminalResponse( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSendDecodedEnvelopeCommand DESCRIPTION: The function sends 'CAT/Send Decoded Envelope Command Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSendDecodedEnvelopeCommand( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATEventConfirmation DESCRIPTION: The function sends 'CAT/Event Confirmation Request' (0x0026) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATEventConfirmation( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSCWSOpenChannel DESCRIPTION: The function sends 'CAT/SCWS Open Channel Request' (0x0027) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSCWSOpenChannel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSCWSCloseChannel DESCRIPTION: The function sends 'CAT/SCWS Close Channel Request' (0x0028) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSCWSCloseChannel( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSCWSSendData DESCRIPTION: The function sends 'CAT/SCWS Send Data Request' (0x0029) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSCWSSendData( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSCWSDataAvailable DESCRIPTION: The function sends 'CAT/SCWS Data Available Request' (0x002A) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSCWSDataAvailable( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSCWSChannelStatus DESCRIPTION: The function sends 'CAT/SCWS Channel Status Request' (0x002B) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSCWSChannelStatus( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATGetTerminalProfile DESCRIPTION: The function sends 'CAT/Get Terminal Profile Request' (0x002C) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATGetTerminalProfile( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATSetConfiguration DESCRIPTION: The function sends 'CAT/Set Configuration Request' (0x002D) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATSetConfiguration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: CATGetConfiguration DESCRIPTION: The function sends 'CAT/Get Configuration Request' (0x002E) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG CATGetConfiguration( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: RMSReset DESCRIPTION: The function sends 'RMS/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG RMSReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: RMSGetSMSWake DESCRIPTION: The function sends 'RMS/Get SMS Wake Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG RMSGetSMSWake( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: RMSSetSMSWake DESCRIPTION: The function sends 'RMS/Set SMS Wake Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG RMSSetSMSWake( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMAReset DESCRIPTION: The function sends 'OMA/Reset Request' (0x0000) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMAReset( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMASetEventReport DESCRIPTION: The function sends 'OMA/Set Event Report Request' (0x0001) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMASetEventReport( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMAStartSession DESCRIPTION: The function sends 'OMA/Start Session Request' (0x0020) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMAStartSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMACancelSession DESCRIPTION: The function sends 'OMA/Cancel Session Request' (0x0021) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMACancelSession( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMAGetSessionInfo DESCRIPTION: The function sends 'OMA/Get Session Info Request' (0x0022) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMAGetSessionInfo( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMASendSelection DESCRIPTION: The function sends 'OMA/Send Selection Request' (0x0023) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMASendSelection( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMAGetFeatures DESCRIPTION: The function sends 'OMA/Get Features Request' (0x0024) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Reserved for future use (set to 0) pIn [ I ] - Reserved for future use (set to 0) pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMAGetFeatures( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut ); /*=========================================================================== METHOD: OMASetFeatures DESCRIPTION: The function sends 'OMA/Set Features Request' (0x0025) and returns the response PARAMETERS: handle [ I ] - Gobi interface handle to [ I ] - Timeout for transaction (in milliseconds) inLen [ I ] - Length of input buffer pIn [ I ] - Input buffer pOutLen [I/O] - Upon input the maximum number of BYTEs pOut can contain, upon output the number of BYTEs copied to pOut pOut [ O ] - Output buffer RETURN VALUE: ULONG - Return code ===========================================================================*/ ULONG OMASetFeatures( GOBIHANDLE handle, ULONG to, ULONG inLen, const BYTE * pIn, ULONG * pOutLen, BYTE * pOut );