| 1 |
Usage: scanimage [OPTION]... |
| 2 |
|
| 3 |
Start image acquisition on a scanner device and write PNM image data to |
| 4 |
standard output. |
| 5 |
|
| 6 |
Parameters are separated by a blank from single-character options (e.g. |
| 7 |
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson). |
| 8 |
-d, --device-name=DEVICE use a given scanner device (e.g. hp:/dev/scanner) |
| 9 |
--format=pnm|tiff file format of output file |
| 10 |
-i, --icc-profile=PROFILE include this ICC profile into TIFF file |
| 11 |
-L, --list-devices show available scanner devices |
| 12 |
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output |
| 13 |
can be specified: %d (device name), %v (vendor), |
| 14 |
%m (model), %t (type), and %i (index number) |
| 15 |
-b, --batch[=FORMAT] working in batch mode, FORMAT is `out%d.pnm' or |
| 16 |
`out%d.tif' by default depending on --format |
| 17 |
--batch-start=# page number to start naming files with |
| 18 |
--batch-count=# how many pages to scan in batch mode |
| 19 |
--batch-increment=# increase number in filename by an amount of # |
| 20 |
--batch-double increment page number by two for 2sided originals |
| 21 |
being scanned in a single sided scanner |
| 22 |
--batch-prompt ask for pressing a key before scanning a page |
| 23 |
--accept-md5-only only accept authorization requests using md5 |
| 24 |
-p, --progress print progress messages |
| 25 |
-n, --dont-scan only set options, don't actually scan |
| 26 |
-T, --test test backend thoroughly |
| 27 |
-h, --help display this help message and exit |
| 28 |
-v, --verbose give even more status messages |
| 29 |
-B, --buffer-size change default input buffersize |
| 30 |
-V, --version print version information |
| 31 |
|
| 32 |
Options specific to device `fujitsu:libusb:007:032': |
| 33 |
Scan Mode: |
| 34 |
--source ADF Front|ADF Back|ADF Duplex [ADF Front] |
| 35 |
Selects the scan source (such as a document-feeder). |
| 36 |
--mode Lineart|Halftone|Gray|Color [Color] |
| 37 |
Selects the scan mode (e.g., lineart, monochrome, or color). |
| 38 |
--resolution 50..600dpi (in steps of 1) [600] |
| 39 |
Sets the horizontal resolution of the scanned image. |
| 40 |
--y-resolution 50..600dpi (in steps of 1) [600] |
| 41 |
Sets the vertical resolution of the scanned image. |
| 42 |
Geometry: |
| 43 |
-l 0..215.872mm (in steps of 0.0211639) [0] |
| 44 |
Top-left x position of scan area. |
| 45 |
-t 0..279.364mm (in steps of 0.0211639) [0] |
| 46 |
Top-left y position of scan area. |
| 47 |
-x 0..215.872mm (in steps of 0.0211639) [215.872] |
| 48 |
Width of scan-area. |
| 49 |
-y 0..279.364mm (in steps of 0.0211639) [279.364] |
| 50 |
Height of scan-area. |
| 51 |
--pagewidth 0..221.121mm (in steps of 0.0211639) [215.872] |
| 52 |
Must be set properly to align scanning window |
| 53 |
--pageheight 0..863.489mm (in steps of 0.0211639) [279.364] |
| 54 |
Must be set properly to eject pages |
| 55 |
Enhancement: |
| 56 |
--brightness -127..127 (in steps of 1) [0] |
| 57 |
Controls the brightness of the acquired image. |
| 58 |
--contrast -127..127 (in steps of 1) [0] |
| 59 |
Controls the contrast of the acquired image. |
| 60 |
--rif[=(yes|no)] [no] |
| 61 |
Reverse image format |
| 62 |
Advanced: |
| 63 |
--compression None|JPEG [None] |
| 64 |
Enable compressed data. May crash your front-end program |
| 65 |
--compression-arg 0..7 (in steps of 1) [0] |
| 66 |
Level of JPEG compression. 1 is small file, 7 is large file. 0 |
| 67 |
(default) is same as 4 |
| 68 |
--dfdetect Default|None|Thickness|Length|Both [Default] |
| 69 |
Enable double feed sensors |
| 70 |
--dfdiff Default|10mm|15mm|20mm [Default] |
| 71 |
Difference in page length to trigger double feed sensor |
| 72 |
--overscan Default|Off|On [Default] |
| 73 |
Collect a few mm of background on top side of scan, before paper |
| 74 |
enters ADF, and increase maximum scan area beyond paper size, to allow |
| 75 |
collection on remaining sides. May conflict with bgcolor option |
| 76 |
--sleeptimer 0..60 (in steps of 1) [0] |
| 77 |
Time in minutes until the internal power supply switches to sleep mode |
| 78 |
Sensors and Buttons: |
| 79 |
|
| 80 |
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE. |
| 81 |
|
| 82 |
List of available devices: |
| 83 |
v4l:/dev/video0 fujitsu:libusb:007:032 |
| 84 |
|