| 1 |
Usage: scanimage [OPTION]... |
| 2 |
|
| 3 |
Start image acquisition on a scanner device and write PNM image data to |
| 4 |
standard output. |
| 5 |
|
| 6 |
-d, --device-name=DEVICE use a given scanner device (e.g. hp:/dev/scanner) |
| 7 |
--format=pnm|tiff file format of output file |
| 8 |
-i, --icc-profile=PROFILE include this ICC profile into TIFF file |
| 9 |
-L, --list-devices show available scanner devices |
| 10 |
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output |
| 11 |
can be specified: %d (device name), %v (vendor), |
| 12 |
%m (model), %t (type), and %i (index number) |
| 13 |
-b, --batch[=FORMAT] working in batch mode, FORMAT is `out%d.pnm' or |
| 14 |
`out%d.tif' by default depending on --format |
| 15 |
--batch-start=# page number to start naming files with |
| 16 |
--batch-count=# how many pages to scan in batch mode |
| 17 |
--batch-increment=# increase number in filename by an amount of # |
| 18 |
--batch-double increment page number by two for 2sided originals |
| 19 |
being scanned in a single sided scanner |
| 20 |
--batch-prompt ask for pressing a key before scanning a page |
| 21 |
--accept-md5-only only accept authorization requests using md5 |
| 22 |
-p, --progress print progress messages |
| 23 |
-n, --dont-scan only set options, don't actually scan |
| 24 |
-T, --test test backend thoroughly |
| 25 |
-h, --help display this help message and exit |
| 26 |
-v, --verbose give even more status messages |
| 27 |
-B, --buffer-size change default input buffersize |
| 28 |
-V, --version print version information |
| 29 |
|
| 30 |
Options specific to device `snapscan:libusb:005:007': |
| 31 |
Scan Mode: |
| 32 |
--resolution auto||50|150|200|240|266|300|350|360|400|600|720|800|1200|1600|3200dpi [300] |
| 33 |
Sets the resolution of the scanned image. |
| 34 |
--preview[=(auto|yes|no)] [no] |
| 35 |
Request a preview-quality scan. |
| 36 |
--mode auto|Color|Gray|Lineart [Color] |
| 37 |
Selects the scan mode (e.g., lineart, monochrome, or color). |
| 38 |
--preview-mode auto|Auto|Color|Gray|Lineart [Auto] |
| 39 |
Select the mode for previews. Greyscale previews usually give the best |
| 40 |
combination of speed and detail. |
| 41 |
--high-quality[=(auto|yes|no)] [no] |
| 42 |
Highest quality but lower speed |
| 43 |
--source auto|Flatbed|Transparency Adapter [Flatbed] |
| 44 |
Selects the scan source (such as a document-feeder). |
| 45 |
Geometry: |
| 46 |
-l auto|0..216mm [0] |
| 47 |
Top-left x position of scan area. |
| 48 |
-t auto|0..297mm [0] |
| 49 |
Top-left y position of scan area. |
| 50 |
-x auto|0..216mm [216] |
| 51 |
Width of scan-area. |
| 52 |
-y auto|0..297mm [297] |
| 53 |
Height of scan-area. |
| 54 |
--predef-window None|6x4 (inch)|8x10 (inch)|8.5x11 (inch) [None] |
| 55 |
Provides standard scanning areas for photographs, printed pages and |
| 56 |
the like. |
| 57 |
Enhancement: |
| 58 |
--depth 8|16bit [8] |
| 59 |
Number of bits per sample, typical values are 1 for "line-art" and 8 |
| 60 |
for multibit scans. |
| 61 |
--quality-cal[=(yes|no)] [yes] |
| 62 |
Do a quality white-calibration |
| 63 |
--halftoning[=(yes|no)] [inactive] |
| 64 |
Selects whether the acquired image should be halftoned (dithered). |
| 65 |
--halftone-pattern DispersedDot8x8|DispersedDot16x16 [inactive] |
| 66 |
Defines the halftoning (dithering) pattern for scanning halftoned |
| 67 |
images. |
| 68 |
--custom-gamma[=(yes|no)] [no] |
| 69 |
Determines whether a builtin or a custom gamma-table should be used. |
| 70 |
--analog-gamma-bind[=(yes|no)] [no] |
| 71 |
In RGB-mode use same values for each color |
| 72 |
--analog-gamma 0..4 [inactive] |
| 73 |
Analog gamma-correction |
| 74 |
--analog-gamma-r 0..4 [1.79999] |
| 75 |
Analog gamma-correction for red |
| 76 |
--analog-gamma-g 0..4 [1.79999] |
| 77 |
Analog gamma-correction for green |
| 78 |
--analog-gamma-b 0..4 [1.79999] |
| 79 |
Analog gamma-correction for blue |
| 80 |
--gamma-table 0..65535,... (in steps of 1) [inactive] |
| 81 |
Gamma-correction table. In color mode this option equally affects the |
| 82 |
red, green, and blue channels simultaneously (i.e., it is an intensity |
| 83 |
gamma table). |
| 84 |
--red-gamma-table 0..65535,... (in steps of 1) [inactive] |
| 85 |
Gamma-correction table for the red band. |
| 86 |
--green-gamma-table 0..65535,... (in steps of 1) [inactive] |
| 87 |
Gamma-correction table for the green band. |
| 88 |
--blue-gamma-table 0..65535,... (in steps of 1) [inactive] |
| 89 |
Gamma-correction table for the blue band. |
| 90 |
--negative[=(auto|yes|no)] [inactive] |
| 91 |
Swap black and white |
| 92 |
--threshold 0..100% (in steps of 1) [inactive] |
| 93 |
Select minimum-brightness to get a white point |
| 94 |
--brightness -400..400% (in steps of 1) [0] |
| 95 |
Controls the brightness of the acquired image. |
| 96 |
--contrast -100..400% (in steps of 1) [0] |
| 97 |
Controls the contrast of the acquired image. |
| 98 |
Advanced: |
| 99 |
--rgb-lpr auto|1..50 (in steps of 1) [4] |
| 100 |
Number of scan lines to request in a SCSI read. Changing this |
| 101 |
parameter allows you to tune the speed at which data is read from the |
| 102 |
scanner during scans. If this is set too low, the scanner will have to |
| 103 |
stop periodically in the middle of a scan; if it's set too high, |
| 104 |
X-based frontends may stop responding to X events and your system could |
| 105 |
bog down. |
| 106 |
--gs-lpr auto|1..50 (in steps of 1) [inactive] |
| 107 |
Number of scan lines to request in a SCSI read. Changing this |
| 108 |
parameter allows you to tune the speed at which data is read from the |
| 109 |
scanner during scans. If this is set too low, the scanner will have to |
| 110 |
stop periodically in the middle of a scan; if it's set too high, |
| 111 |
X-based frontends may stop responding to X events and your system could |
| 112 |
bog down. |
| 113 |
|
| 114 |
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE. |
| 115 |
|
| 116 |
List of available devices: |
| 117 |
snapscan:libusb:005:007 |