Debian Codegraph @

frmts/jpeg/libjpeg/jdmarker.c

raw
1 /*
2 * jdmarker.c
3 *
4 * Copyright (C) 1991-1998, Thomas G. Lane.
5 * This file is part of the Independent JPEG Group's software.
6 * For conditions of distribution and use, see the accompanying README file.
7 *
8 * This file contains routines to decode JPEG datastream markers.
9 * Most of the complexity arises from our desire to support input
10 * suspension: if not all of the data for a marker is available,
11 * we must exit back to the application. On resumption, we reprocess
12 * the marker.
13 */
14
15 #define JPEG_INTERNALS
16 #include "jinclude.h"
17 #include "jpeglib.h"
18
19
20 typedef enum { /* JPEG marker codes */
21 M_SOF0 = 0xc0,
22 M_SOF1 = 0xc1,
23 M_SOF2 = 0xc2,
24 M_SOF3 = 0xc3,
25
26 M_SOF5 = 0xc5,
27 M_SOF6 = 0xc6,
28 M_SOF7 = 0xc7,
29
30 M_JPG = 0xc8,
31 M_SOF9 = 0xc9,
32 M_SOF10 = 0xca,
33 M_SOF11 = 0xcb,
34
35 M_SOF13 = 0xcd,
36 M_SOF14 = 0xce,
37 M_SOF15 = 0xcf,
38
39 M_DHT = 0xc4,
40
41 M_DAC = 0xcc,
42
43 M_RST0 = 0xd0,
44 M_RST1 = 0xd1,
45 M_RST2 = 0xd2,
46 M_RST3 = 0xd3,
47 M_RST4 = 0xd4,
48 M_RST5 = 0xd5,
49 M_RST6 = 0xd6,
50 M_RST7 = 0xd7,
51
52 M_SOI = 0xd8,
53 M_EOI = 0xd9,
54 M_SOS = 0xda,
55 M_DQT = 0xdb,
56 M_DNL = 0xdc,
57 M_DRI = 0xdd,
58 M_DHP = 0xde,
59 M_EXP = 0xdf,
60
61 M_APP0 = 0xe0,
62 M_APP1 = 0xe1,
63 M_APP2 = 0xe2,
64 M_APP3 = 0xe3,
65 M_APP4 = 0xe4,
66 M_APP5 = 0xe5,
67 M_APP6 = 0xe6,
68 M_APP7 = 0xe7,
69 M_APP8 = 0xe8,
70 M_APP9 = 0xe9,
71 M_APP10 = 0xea,
72 M_APP11 = 0xeb,
73 M_APP12 = 0xec,
74 M_APP13 = 0xed,
75 M_APP14 = 0xee,
76 M_APP15 = 0xef,
77
78 M_JPG0 = 0xf0,
79 M_JPG13 = 0xfd,
80 M_COM = 0xfe,
81
82 M_TEM = 0x01,
83
84 M_ERROR = 0x100
85 } JPEG_MARKER;
86
87
88 /* Private state */
89
90 typedef struct {
91 struct jpeg_marker_reader pub; /* public fields */
92
93 /* Application-overridable marker processing methods */
94 jpeg_marker_parser_method process_COM;
95 jpeg_marker_parser_method process_APPn[16];
96
97 /* Limit on marker data length to save for each marker type */
98 unsigned int length_limit_COM;
99 unsigned int length_limit_APPn[16];
100
101 /* Status of COM/APPn marker saving */
102 jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */
103 unsigned int bytes_read; /* data bytes read so far in marker */
104 /* Note: cur_marker is not linked into marker_list until it's all read. */
105 } my_marker_reader;
106
107 typedef my_marker_reader * my_marker_ptr;
108
109
110 /*
111 * Macros for fetching data from the data source module.
112 *
113 * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect
114 * the current restart point; we update them only when we have reached a
115 * suitable place to restart if a suspension occurs.
116 */
117
118 /* Declare and initialize local copies of input pointer/count */
119 #define INPUT_VARS(cinfo) \
120 struct jpeg_source_mgr * datasrc = (cinfo)->src; \
121 const JOCTET * next_input_byte = datasrc->next_input_byte; \
122 size_t bytes_in_buffer = datasrc->bytes_in_buffer
123
124 /* Unload the local copies --- do this only at a restart boundary */
125 #define INPUT_SYNC(cinfo) \
126 ( datasrc->next_input_byte = next_input_byte, \
127 datasrc->bytes_in_buffer = bytes_in_buffer )
128
129 /* Reload the local copies --- used only in MAKE_BYTE_AVAIL */
130 #define INPUT_RELOAD(cinfo) \
131 ( next_input_byte = datasrc->next_input_byte, \
132 bytes_in_buffer = datasrc->bytes_in_buffer )
133
134 /* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available.
135 * Note we do *not* do INPUT_SYNC before calling fill_input_buffer,
136 * but we must reload the local copies after a successful fill.
137 */
138 #define MAKE_BYTE_AVAIL(cinfo,action) \
139 if (bytes_in_buffer == 0) { \
140 if (! (*datasrc->fill_input_buffer) (cinfo)) \
141 { action; } \
142 INPUT_RELOAD(cinfo); \
143 }
144
145 /* Read a byte into variable V.
146 * If must suspend, take the specified action (typically "return FALSE").
147 */
148 #define INPUT_BYTE(cinfo,V,action) \
149 MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
150 bytes_in_buffer--; \
151 V = GETJOCTET(*next_input_byte++); )
152
153 /* As above, but read two bytes interpreted as an unsigned 16-bit integer.
154 * V should be declared unsigned int or perhaps INT32.
155 */
156 #define INPUT_2BYTES(cinfo,V,action) \
157 MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
158 bytes_in_buffer--; \
159 V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \
160 MAKE_BYTE_AVAIL(cinfo,action); \
161 bytes_in_buffer--; \
162 V += GETJOCTET(*next_input_byte++); )
163
164
165 /*
166 * Routines to process JPEG markers.
167 *
168 * Entry condition: JPEG marker itself has been read and its code saved
169 * in cinfo->unread_marker; input restart point is just after the marker.
170 *
171 * Exit: if return TRUE, have read and processed any parameters, and have
172 * updated the restart point to point after the parameters.
173 * If return FALSE, was forced to suspend before reaching end of
174 * marker parameters; restart point has not been moved. Same routine
175 * will be called again after application supplies more input data.
176 *
177 * This approach to suspension assumes that all of a marker's parameters
178 * can fit into a single input bufferload. This should hold for "normal"
179 * markers. Some COM/APPn markers might have large parameter segments
180 * that might not fit. If we are simply dropping such a marker, we use
181 * skip_input_data to get past it, and thereby put the problem on the
182 * source manager's shoulders. If we are saving the marker's contents
183 * into memory, we use a slightly different convention: when forced to
184 * suspend, the marker processor updates the restart point to the end of
185 * what it's consumed (ie, the end of the buffer) before returning FALSE.
186 * On resumption, cinfo->unread_marker still contains the marker code,
187 * but the data source will point to the next chunk of marker data.
188 * The marker processor must retain internal state to deal with this.
189 *
190 * Note that we don't bother to avoid duplicate trace messages if a
191 * suspension occurs within marker parameters. Other side effects
192 * require more care.
193 */
194
195
196 LOCAL(boolean)
197 get_soi (j_decompress_ptr cinfo)
198 /* Process an SOI marker */
199 {
200 int i;
201
202 TRACEMS(cinfo, 1, JTRC_SOI);
203
204 if (cinfo->marker->saw_SOI)
205 ERREXIT(cinfo, JERR_SOI_DUPLICATE);
206
207 /* Reset all parameters that are defined to be reset by SOI */
208
209 for (i = 0; i < NUM_ARITH_TBLS; i++) {
210 cinfo->arith_dc_L[i] = 0;
211 cinfo->arith_dc_U[i] = 1;
212 cinfo->arith_ac_K[i] = 5;
213 }
214 cinfo->restart_interval = 0;
215
216 /* Set initial assumptions for colorspace etc */
217
218 cinfo->jpeg_color_space = JCS_UNKNOWN;
219 cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
220
221 cinfo->saw_JFIF_marker = FALSE;
222 cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */
223 cinfo->JFIF_minor_version = 1;
224 cinfo->density_unit = 0;
225 cinfo->X_density = 1;
226 cinfo->Y_density = 1;
227 cinfo->saw_Adobe_marker = FALSE;
228 cinfo->Adobe_transform = 0;
229
230 cinfo->marker->saw_SOI = TRUE;
231
232 return TRUE;
233 }
234
235
236 LOCAL(boolean)
237 get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
238 /* Process a SOFn marker */
239 {
240 INT32 length;
241 int c, ci;
242 jpeg_component_info * compptr;
243 INPUT_VARS(cinfo);
244
245 cinfo->progressive_mode = is_prog;
246 cinfo->arith_code = is_arith;
247
248 INPUT_2BYTES(cinfo, length, return FALSE);
249
250 INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE);
251 INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE);
252 INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE);
253 INPUT_BYTE(cinfo, cinfo->num_components, return FALSE);
254
255 length -= 8;
256
257 TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker,
258 (int) cinfo->image_width, (int) cinfo->image_height,
259 cinfo->num_components);
260
261 if (cinfo->marker->saw_SOF)
262 ERREXIT(cinfo, JERR_SOF_DUPLICATE);
263
264 /* We don't support files in which the image height is initially specified */
265 /* as 0 and is later redefined by DNL. As long as we have to check that, */
266 /* might as well have a general sanity check. */
267 if (cinfo->image_height <= 0 || cinfo->image_width <= 0
268 || cinfo->num_components <= 0)
269 ERREXIT(cinfo, JERR_EMPTY_IMAGE);
270
271 if (length != (cinfo->num_components * 3))
272 ERREXIT(cinfo, JERR_BAD_LENGTH);
273
274 if (cinfo->comp_info == NULL) /* do only once, even if suspend */
275 cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small)
276 ((j_common_ptr) cinfo, JPOOL_IMAGE,
277 cinfo->num_components * SIZEOF(jpeg_component_info));
278
279 for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
280 ci++, compptr++) {
281 compptr->component_index = ci;
282 INPUT_BYTE(cinfo, compptr->component_id, return FALSE);
283 INPUT_BYTE(cinfo, c, return FALSE);
284 compptr->h_samp_factor = (c >> 4) & 15;
285 compptr->v_samp_factor = (c ) & 15;
286 INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE);
287
288 TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT,
289 compptr->component_id, compptr->h_samp_factor,
290 compptr->v_samp_factor, compptr->quant_tbl_no);
291 }
292
293 cinfo->marker->saw_SOF = TRUE;
294
295 INPUT_SYNC(cinfo);
296 return TRUE;
297 }
298
299
300 LOCAL(boolean)
301 get_sos (j_decompress_ptr cinfo)
302 /* Process a SOS marker */
303 {
304 INT32 length;
305 int i, ci, n, c, cc;
306 jpeg_component_info * compptr;
307 INPUT_VARS(cinfo);
308
309 if (! cinfo->marker->saw_SOF)
310 ERREXIT(cinfo, JERR_SOS_NO_SOF);
311
312 INPUT_2BYTES(cinfo, length, return FALSE);
313
314 INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */
315
316 TRACEMS1(cinfo, 1, JTRC_SOS, n);
317
318 if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN)
319 ERREXIT(cinfo, JERR_BAD_LENGTH);
320
321 cinfo->comps_in_scan = n;
322
323 /* Collect the component-spec parameters */
324
325 for (i = 0; i < n; i++) {
326 INPUT_BYTE(cinfo, cc, return FALSE);
327 INPUT_BYTE(cinfo, c, return FALSE);
328
329 for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
330 ci++, compptr++) {
331 if (cc == compptr->component_id)
332 goto id_found;
333 }
334
335 ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
336
337 id_found:
338
339 cinfo->cur_comp_info[i] = compptr;
340 compptr->dc_tbl_no = (c >> 4) & 15;
341 compptr->ac_tbl_no = (c ) & 15;
342
343 TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc,
344 compptr->dc_tbl_no, compptr->ac_tbl_no);
345
346 /* This CSi (cc) should differ from the previous CSi */
347 for (ci = 0; ci < i; ci++) {
348 if (cinfo->cur_comp_info[ci] == compptr)
349 ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
350 }
351 }
352
353 /* Collect the additional scan parameters Ss, Se, Ah/Al. */
354 INPUT_BYTE(cinfo, c, return FALSE);
355 cinfo->Ss = c;
356 INPUT_BYTE(cinfo, c, return FALSE);
357 cinfo->Se = c;
358 INPUT_BYTE(cinfo, c, return FALSE);
359 cinfo->Ah = (c >> 4) & 15;
360 cinfo->Al = (c ) & 15;
361
362 TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se,
363 cinfo->Ah, cinfo->Al);
364
365 /* Prepare to scan data & restart markers */
366 cinfo->marker->next_restart_num = 0;
367
368 /* Count another SOS marker */
369 cinfo->input_scan_number++;
370
371 INPUT_SYNC(cinfo);
372 return TRUE;
373 }
374
375
376 #ifdef D_ARITH_CODING_SUPPORTED
377
378 LOCAL(boolean)
379 get_dac (j_decompress_ptr cinfo)
380 /* Process a DAC marker */
381 {
382 INT32 length;
383 int l_index, val;
384 INPUT_VARS(cinfo);
385
386 INPUT_2BYTES(cinfo, length, return FALSE);
387 length -= 2;
388
389 while (length > 0) {
390 INPUT_BYTE(cinfo, l_index, return FALSE);
391 INPUT_BYTE(cinfo, val, return FALSE);
392
393 length -= 2;
394
395 TRACEMS2(cinfo, 1, JTRC_DAC, l_index, val);
396
397 if (l_index < 0 || l_index >= (2*NUM_ARITH_TBLS))
398 ERREXIT1(cinfo, JERR_DAC_INDEX, l_index);
399
400 if (l_index >= NUM_ARITH_TBLS) { /* define AC table */
401 cinfo->arith_ac_K[l_index-NUM_ARITH_TBLS] = (UINT8) val;
402 } else { /* define DC table */
403 cinfo->arith_dc_L[l_index] = (UINT8) (val & 0x0F);
404 cinfo->arith_dc_U[l_index] = (UINT8) (val >> 4);
405 if (cinfo->arith_dc_L[l_index] > cinfo->arith_dc_U[l_index])
406 ERREXIT1(cinfo, JERR_DAC_VALUE, val);
407 }
408 }
409
410 if (length != 0)
411 ERREXIT(cinfo, JERR_BAD_LENGTH);
412
413 INPUT_SYNC(cinfo);
414 return TRUE;
415 }
416
417 #else /* ! D_ARITH_CODING_SUPPORTED */
418
419 #define get_dac(cinfo) skip_variable(cinfo)
420
421 #endif /* D_ARITH_CODING_SUPPORTED */
422
423
424 LOCAL(boolean)
425 get_dht (j_decompress_ptr cinfo)
426 /* Process a DHT marker */
427 {
428 INT32 length;
429 UINT8 bits[17];
430 UINT8 huffval[256];
431 int i, l_index, count;
432 JHUFF_TBL **htblptr;
433 INPUT_VARS(cinfo);
434
435 INPUT_2BYTES(cinfo, length, return FALSE);
436 length -= 2;
437
438 while (length > 16) {
439 INPUT_BYTE(cinfo, l_index, return FALSE);
440
441 TRACEMS1(cinfo, 1, JTRC_DHT, l_index);
442
443 bits[0] = 0;
444 count = 0;
445 for (i = 1; i <= 16; i++) {
446 INPUT_BYTE(cinfo, bits[i], return FALSE);
447 count += bits[i];
448 }
449
450 length -= 1 + 16;
451
452 TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
453 bits[1], bits[2], bits[3], bits[4],
454 bits[5], bits[6], bits[7], bits[8]);
455 TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
456 bits[9], bits[10], bits[11], bits[12],
457 bits[13], bits[14], bits[15], bits[16]);
458
459 /* Here we just do minimal validation of the counts to avoid walking
460 * off the end of our table space. jdhuff.c will check more carefully.
461 */
462 if (count > 256 || ((INT32) count) > length)
463 ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
464
465 for (i = 0; i < count; i++)
466 INPUT_BYTE(cinfo, huffval[i], return FALSE);
467
468 length -= count;
469
470 if (l_index & 0x10) { /* AC table definition */
471 l_index -= 0x10;
472 if (l_index < 0 || l_index >= NUM_HUFF_TBLS)
473 ERREXIT1(cinfo, JERR_DHT_INDEX, l_index);
474 htblptr = &cinfo->ac_huff_tbl_ptrs[l_index];
475 } else { /* DC table definition */
476 if (l_index < 0 || l_index >= NUM_HUFF_TBLS)
477 ERREXIT1(cinfo, JERR_DHT_INDEX, l_index);
478 htblptr = &cinfo->dc_huff_tbl_ptrs[l_index];
479 }
480
481 if (*htblptr == NULL)
482 *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
483
484 MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
485 MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
486 }
487
488 if (length != 0)
489 ERREXIT(cinfo, JERR_BAD_LENGTH);
490
491 INPUT_SYNC(cinfo);
492 return TRUE;
493 }
494
495
496 LOCAL(boolean)
497 get_dqt (j_decompress_ptr cinfo)
498 /* Process a DQT marker */
499 {
500 INT32 length;
501 int n, i, prec;
502 unsigned int tmp;
503 JQUANT_TBL *quant_ptr;
504 INPUT_VARS(cinfo);
505
506 INPUT_2BYTES(cinfo, length, return FALSE);
507 length -= 2;
508
509 while (length > 0) {
510 INPUT_BYTE(cinfo, n, return FALSE);
511 prec = n >> 4;
512 n &= 0x0F;
513
514 TRACEMS2(cinfo, 1, JTRC_DQT, n, prec);
515
516 if (n >= NUM_QUANT_TBLS)
517 ERREXIT1(cinfo, JERR_DQT_INDEX, n);
518
519 if (cinfo->quant_tbl_ptrs[n] == NULL)
520 cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo);
521 quant_ptr = cinfo->quant_tbl_ptrs[n];
522
523 for (i = 0; i < DCTSIZE2; i++) {
524 if (prec)
525 INPUT_2BYTES(cinfo, tmp, return FALSE);
526 else
527 INPUT_BYTE(cinfo, tmp, return FALSE);
528 /* We convert the zigzag-order table to natural array order. */
529 quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp;
530 }
531
532 if (cinfo->err->trace_level >= 2) {
533 for (i = 0; i < DCTSIZE2; i += 8) {
534 TRACEMS8(cinfo, 2, JTRC_QUANTVALS,
535 quant_ptr->quantval[i], quant_ptr->quantval[i+1],
536 quant_ptr->quantval[i+2], quant_ptr->quantval[i+3],
537 quant_ptr->quantval[i+4], quant_ptr->quantval[i+5],
538 quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]);
539 }
540 }
541
542 length -= DCTSIZE2+1;
543 if (prec) length -= DCTSIZE2;
544 }
545
546 if (length != 0)
547 ERREXIT(cinfo, JERR_BAD_LENGTH);
548
549 INPUT_SYNC(cinfo);
550 return TRUE;
551 }
552
553
554 LOCAL(boolean)
555 get_dri (j_decompress_ptr cinfo)
556 /* Process a DRI marker */
557 {
558 INT32 length;
559 unsigned int tmp;
560 INPUT_VARS(cinfo);
561
562 INPUT_2BYTES(cinfo, length, return FALSE);
563
564 if (length != 4)
565 ERREXIT(cinfo, JERR_BAD_LENGTH);
566
567 INPUT_2BYTES(cinfo, tmp, return FALSE);
568
569 TRACEMS1(cinfo, 1, JTRC_DRI, tmp);
570
571 cinfo->restart_interval = tmp;
572
573 INPUT_SYNC(cinfo);
574 return TRUE;
575 }
576
577
578 /*
579 * Routines for processing APPn and COM markers.
580 * These are either saved in memory or discarded, per application request.
581 * APP0 and APP14 are specially checked to see if they are
582 * JFIF and Adobe markers, respectively.
583 */
584
585 #define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */
586 #define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */
587 #define APPN_DATA_LEN 14 /* Must be the largest of the above!! */
588
589
590 LOCAL(void)
591 examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
592 unsigned int datalen, INT32 remaining)
593 /* Examine first few bytes from an APP0.
594 * Take appropriate action if it is a JFIF marker.
595 * datalen is # of bytes at data[], remaining is length of rest of marker data.
596 */
597 {
598 INT32 totallen = (INT32) datalen + remaining;
599
600 if (datalen >= APP0_DATA_LEN &&
601 GETJOCTET(data[0]) == 0x4A &&
602 GETJOCTET(data[1]) == 0x46 &&
603 GETJOCTET(data[2]) == 0x49 &&
604 GETJOCTET(data[3]) == 0x46 &&
605 GETJOCTET(data[4]) == 0) {
606 /* Found JFIF APP0 marker: save info */
607 cinfo->saw_JFIF_marker = TRUE;
608 cinfo->JFIF_major_version = GETJOCTET(data[5]);
609 cinfo->JFIF_minor_version = GETJOCTET(data[6]);
610 cinfo->density_unit = GETJOCTET(data[7]);
611 cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
612 cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
613 /* Check version.
614 * Major version must be 1, anything else signals an incompatible change.
615 * (We used to treat this as an error, but now it's a nonfatal warning,
616 * because some bozo at Hijaak couldn't read the spec.)
617 * Minor version should be 0..2, but process anyway if newer.
618 */
619 if (cinfo->JFIF_major_version != 1)
620 WARNMS2(cinfo, JWRN_JFIF_MAJOR,
621 cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
622 /* Generate trace messages */
623 TRACEMS5(cinfo, 1, JTRC_JFIF,
624 cinfo->JFIF_major_version, cinfo->JFIF_minor_version,
625 cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
626 /* Validate thumbnail dimensions and issue appropriate messages */
627 if (GETJOCTET(data[12]) | GETJOCTET(data[13]))
628 TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL,
629 GETJOCTET(data[12]), GETJOCTET(data[13]));
630 totallen -= APP0_DATA_LEN;
631 if (totallen !=
632 ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3))
633 TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen);
634 } else if (datalen >= 6 &&
635 GETJOCTET(data[0]) == 0x4A &&
636 GETJOCTET(data[1]) == 0x46 &&
637 GETJOCTET(data[2]) == 0x58 &&
638 GETJOCTET(data[3]) == 0x58 &&
639 GETJOCTET(data[4]) == 0) {
640 /* Found JFIF "JFXX" extension APP0 marker */
641 /* The library doesn't actually do anything with these,
642 * but we try to produce a helpful trace message.
643 */
644 switch (GETJOCTET(data[5])) {
645 case 0x10:
646 TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen);
647 break;
648 case 0x11:
649 TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen);
650 break;
651 case 0x13:
652 TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen);
653 break;
654 default:
655 TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION,
656 GETJOCTET(data[5]), (int) totallen);
657 break;
658 }
659 } else {
660 /* Start of APP0 does not match "JFIF" or "JFXX", or too short */
661 TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen);
662 }
663 }
664
665
666 LOCAL(void)
667 examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data,
668 unsigned int datalen, INT32 remaining)
669 /* Examine first few bytes from an APP14.
670 * Take appropriate action if it is an Adobe marker.
671 * datalen is # of bytes at data[], remaining is length of rest of marker data.
672 */
673 {
674 unsigned int version, flags0, flags1, transform;
675
676 if (datalen >= APP14_DATA_LEN &&
677 GETJOCTET(data[0]) == 0x41 &&
678 GETJOCTET(data[1]) == 0x64 &&
679 GETJOCTET(data[2]) == 0x6F &&
680 GETJOCTET(data[3]) == 0x62 &&
681 GETJOCTET(data[4]) == 0x65) {
682 /* Found Adobe APP14 marker */
683 version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]);
684 flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]);
685 flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]);
686 transform = GETJOCTET(data[11]);
687 TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
688 cinfo->saw_Adobe_marker = TRUE;
689 cinfo->Adobe_transform = (UINT8) transform;
690 } else {
691 /* Start of APP14 does not match "Adobe", or too short */
692 TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining));
693 }
694 }
695
696
697 METHODDEF(boolean)
698 get_interesting_appn (j_decompress_ptr cinfo)
699 /* Process an APP0 or APP14 marker without saving it */
700 {
701 INT32 length;
702 JOCTET b[APPN_DATA_LEN];
703 unsigned int i, numtoread;
704 INPUT_VARS(cinfo);
705
706 INPUT_2BYTES(cinfo, length, return FALSE);
707 length -= 2;
708
709 /* get the interesting part of the marker data */
710 if (length >= APPN_DATA_LEN)
711 numtoread = APPN_DATA_LEN;
712 else if (length > 0)
713 numtoread = (unsigned int) length;
714 else
715 numtoread = 0;
716 for (i = 0; i < numtoread; i++)
717 INPUT_BYTE(cinfo, b[i], return FALSE);
718 length -= numtoread;
719
720 /* process it */
721 switch (cinfo->unread_marker) {
722 case M_APP0:
723 examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length);
724 break;
725 case M_APP14:
726 examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length);
727 break;
728 default:
729 /* can't get here unless jpeg_save_markers chooses wrong processor */
730 ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
731 break;
732 }
733
734 /* skip any remaining data -- could be lots */
735 INPUT_SYNC(cinfo);
736 if (length > 0)
737 (*cinfo->src->skip_input_data) (cinfo, (long) length);
738
739 return TRUE;
740 }
741
742
743 #ifdef SAVE_MARKERS_SUPPORTED
744
745 METHODDEF(boolean)
746 save_marker (j_decompress_ptr cinfo)
747 /* Save an APPn or COM marker into the marker list */
748 {
749 my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
750 jpeg_saved_marker_ptr cur_marker = marker->cur_marker;
751 unsigned int bytes_read, data_length;
752 JOCTET FAR * data;
753 INT32 length = 0;
754 INPUT_VARS(cinfo);
755
756 if (cur_marker == NULL) {
757 /* begin reading a marker */
758 INPUT_2BYTES(cinfo, length, return FALSE);
759 length -= 2;
760 if (length >= 0) { /* watch out for bogus length word */
761 /* figure out how much we want to save */
762 unsigned int limit;
763 if (cinfo->unread_marker == (int) M_COM)
764 limit = marker->length_limit_COM;
765 else
766 limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0];
767 if ((unsigned int) length < limit)
768 limit = (unsigned int) length;
769 /* allocate and initialize the marker item */
770 cur_marker = (jpeg_saved_marker_ptr)
771 (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
772 SIZEOF(struct jpeg_marker_struct) + limit);
773 cur_marker->next = NULL;
774 cur_marker->marker = (UINT8) cinfo->unread_marker;
775 cur_marker->original_length = (unsigned int) length;
776 cur_marker->data_length = limit;
777 /* data area is just beyond the jpeg_marker_struct */
778 data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1);
779 marker->cur_marker = cur_marker;
780 marker->bytes_read = 0;
781 bytes_read = 0;
782 data_length = limit;
783 } else {
784 /* deal with bogus length word */
785 bytes_read = data_length = 0;
786 data = NULL;
787 }
788 } else {
789 /* resume reading a marker */
790 bytes_read = marker->bytes_read;
791 data_length = cur_marker->data_length;
792 data = cur_marker->data + bytes_read;
793 }
794
795 while (bytes_read < data_length) {
796 INPUT_SYNC(cinfo); /* move the restart point to here */
797 marker->bytes_read = bytes_read;
798 /* If there's not at least one byte in buffer, suspend */
799 MAKE_BYTE_AVAIL(cinfo, return FALSE);
800 /* Copy bytes with reasonable rapidity */
801 while (bytes_read < data_length && bytes_in_buffer > 0) {
802 *data++ = *next_input_byte++;
803 bytes_in_buffer--;
804 bytes_read++;
805 }
806 }
807
808 /* Done reading what we want to read */
809 if (cur_marker != NULL) { /* will be NULL if bogus length word */
810 /* Add new marker to end of list */
811 if (cinfo->marker_list == NULL) {
812 cinfo->marker_list = cur_marker;
813 } else {
814 jpeg_saved_marker_ptr prev = cinfo->marker_list;
815 while (prev->next != NULL)
816 prev = prev->next;
817 prev->next = cur_marker;
818 }
819 /* Reset pointer & calc remaining data length */
820 data = cur_marker->data;
821 length = cur_marker->original_length - data_length;
822 }
823 /* Reset to initial state for next marker */
824 marker->cur_marker = NULL;
825
826 /* Process the marker if interesting; else just make a generic trace msg */
827 switch (cinfo->unread_marker) {
828 case M_APP0:
829 examine_app0(cinfo, data, data_length, length);
830 break;
831 case M_APP14:
832 examine_app14(cinfo, data, data_length, length);
833 break;
834 default:
835 TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker,
836 (int) (data_length + length));
837 break;
838 }
839
840 /* skip any remaining data -- could be lots */
841 INPUT_SYNC(cinfo); /* do before skip_input_data */
842 if (length > 0)
843 (*cinfo->src->skip_input_data) (cinfo, (long) length);
844
845 return TRUE;
846 }
847
848 #endif /* SAVE_MARKERS_SUPPORTED */
849
850
851 METHODDEF(boolean)
852 skip_variable (j_decompress_ptr cinfo)
853 /* Skip over an unknown or uninteresting variable-length marker */
854 {
855 INT32 length;
856 INPUT_VARS(cinfo);
857
858 INPUT_2BYTES(cinfo, length, return FALSE);
859 length -= 2;
860
861 TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length);
862
863 INPUT_SYNC(cinfo); /* do before skip_input_data */
864 if (length > 0)
865 (*cinfo->src->skip_input_data) (cinfo, (long) length);
866
867 return TRUE;
868 }
869
870
871 /*
872 * Find the next JPEG marker, save it in cinfo->unread_marker.
873 * Returns FALSE if had to suspend before reaching a marker;
874 * in that case cinfo->unread_marker is unchanged.
875 *
876 * Note that the result might not be a valid marker code,
877 * but it will never be 0 or FF.
878 */
879
880 LOCAL(boolean)
881 next_marker (j_decompress_ptr cinfo)
882 {
883 int c;
884 INPUT_VARS(cinfo);
885
886 for (;;) {
887 INPUT_BYTE(cinfo, c, return FALSE);
888 /* Skip any non-FF bytes.
889 * This may look a bit inefficient, but it will not occur in a valid file.
890 * We sync after each discarded byte so that a suspending data source
891 * can discard the byte from its buffer.
892 */
893 while (c != 0xFF) {
894 cinfo->marker->discarded_bytes++;
895 INPUT_SYNC(cinfo);
896 INPUT_BYTE(cinfo, c, return FALSE);
897 }
898 /* This loop swallows any duplicate FF bytes. Extra FFs are legal as
899 * pad bytes, so don't count them in discarded_bytes. We assume there
900 * will not be so many consecutive FF bytes as to overflow a suspending
901 * data source's input buffer.
902 */
903 do {
904 INPUT_BYTE(cinfo, c, return FALSE);
905 } while (c == 0xFF);
906 if (c != 0)
907 break; /* found a valid marker, exit loop */
908 /* Reach here if we found a stuffed-zero data sequence (FF/00).
909 * Discard it and loop back to try again.
910 */
911 cinfo->marker->discarded_bytes += 2;
912 INPUT_SYNC(cinfo);
913 }
914
915 if (cinfo->marker->discarded_bytes != 0) {
916 WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c);
917 cinfo->marker->discarded_bytes = 0;
918 }
919
920 cinfo->unread_marker = c;
921
922 INPUT_SYNC(cinfo);
923 return TRUE;
924 }
925
926
927 LOCAL(boolean)
928 first_marker (j_decompress_ptr cinfo)
929 /* Like next_marker, but used to obtain the initial SOI marker. */
930 /* For this marker, we do not allow preceding garbage or fill; otherwise,
931 * we might well scan an entire input file before realizing it ain't JPEG.
932 * If an application wants to process non-JFIF files, it must seek to the
933 * SOI before calling the JPEG library.
934 */
935 {
936 int c, c2;
937 INPUT_VARS(cinfo);
938
939 INPUT_BYTE(cinfo, c, return FALSE);
940 INPUT_BYTE(cinfo, c2, return FALSE);
941 if (c != 0xFF || c2 != (int) M_SOI)
942 ERREXIT2(cinfo, JERR_NO_SOI, c, c2);
943
944 cinfo->unread_marker = c2;
945
946 INPUT_SYNC(cinfo);
947 return TRUE;
948 }
949
950
951 /*
952 * Read markers until SOS or EOI.
953 *
954 * Returns same codes as are defined for jpeg_consume_input:
955 * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
956 */
957
958 METHODDEF(int)
959 read_markers (j_decompress_ptr cinfo)
960 {
961 /* Outer loop repeats once for each marker. */
962 for (;;) {
963 /* Collect the marker proper, unless we already did. */
964 /* NB: first_marker() enforces the requirement that SOI appear first. */
965 if (cinfo->unread_marker == 0) {
966 if (! cinfo->marker->saw_SOI) {
967 if (! first_marker(cinfo))
968 return JPEG_SUSPENDED;
969 } else {
970 if (! next_marker(cinfo))
971 return JPEG_SUSPENDED;
972 }
973 }
974 /* At this point cinfo->unread_marker contains the marker code and the
975 * input point is just past the marker proper, but before any parameters.
976 * A suspension will cause us to return with this state still true.
977 */
978 switch (cinfo->unread_marker) {
979 case M_SOI:
980 if (! get_soi(cinfo))
981 return JPEG_SUSPENDED;
982 break;
983
984 case M_SOF0: /* Baseline */
985 case M_SOF1: /* Extended sequential, Huffman */
986 if (! get_sof(cinfo, FALSE, FALSE))
987 return JPEG_SUSPENDED;
988 break;
989
990 case M_SOF2: /* Progressive, Huffman */
991 if (! get_sof(cinfo, TRUE, FALSE))
992 return JPEG_SUSPENDED;
993 break;
994
995 case M_SOF9: /* Extended sequential, arithmetic */
996 if (! get_sof(cinfo, FALSE, TRUE))
997 return JPEG_SUSPENDED;
998 break;
999
1000 case M_SOF10: /* Progressive, arithmetic */
1001 if (! get_sof(cinfo, TRUE, TRUE))
1002 return JPEG_SUSPENDED;
1003 break;
1004
1005 /* Currently unsupported SOFn types */
1006 case M_SOF3: /* Lossless, Huffman */
1007 case M_SOF5: /* Differential sequential, Huffman */
1008 case M_SOF6: /* Differential progressive, Huffman */
1009 case M_SOF7: /* Differential lossless, Huffman */
1010 case M_JPG: /* Reserved for JPEG extensions */
1011 case M_SOF11: /* Lossless, arithmetic */
1012 case M_SOF13: /* Differential sequential, arithmetic */
1013 case M_SOF14: /* Differential progressive, arithmetic */
1014 case M_SOF15: /* Differential lossless, arithmetic */
1015 ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker);
1016 break;
1017
1018 case M_SOS:
1019 if (! get_sos(cinfo))
1020 return JPEG_SUSPENDED;
1021 cinfo->unread_marker = 0; /* processed the marker */
1022 return JPEG_REACHED_SOS;
1023
1024 case M_EOI:
1025 TRACEMS(cinfo, 1, JTRC_EOI);
1026 cinfo->unread_marker = 0; /* processed the marker */
1027 return JPEG_REACHED_EOI;
1028
1029 case M_DAC:
1030 if (! get_dac(cinfo))
1031 return JPEG_SUSPENDED;
1032 break;
1033
1034 case M_DHT:
1035 if (! get_dht(cinfo))
1036 return JPEG_SUSPENDED;
1037 break;
1038
1039 case M_DQT:
1040 if (! get_dqt(cinfo))
1041 return JPEG_SUSPENDED;
1042 break;
1043
1044 case M_DRI:
1045 if (! get_dri(cinfo))
1046 return JPEG_SUSPENDED;
1047 break;
1048
1049 case M_APP0:
1050 case M_APP1:
1051 case M_APP2:
1052 case M_APP3:
1053 case M_APP4:
1054 case M_APP5:
1055 case M_APP6:
1056 case M_APP7:
1057 case M_APP8:
1058 case M_APP9:
1059 case M_APP10:
1060 case M_APP11:
1061 case M_APP12:
1062 case M_APP13:
1063 case M_APP14:
1064 case M_APP15:
1065 if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[
1066 cinfo->unread_marker - (int) M_APP0]) (cinfo))
1067 return JPEG_SUSPENDED;
1068 break;
1069
1070 case M_COM:
1071 if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
1072 return JPEG_SUSPENDED;
1073 break;
1074
1075 case M_RST0: /* these are all parameterless */
1076 case M_RST1:
1077 case M_RST2:
1078 case M_RST3:
1079 case M_RST4:
1080 case M_RST5:
1081 case M_RST6:
1082 case M_RST7:
1083 case M_TEM:
1084 TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker);
1085 break;
1086
1087 case M_DNL: /* Ignore DNL ... perhaps the wrong thing */
1088 if (! skip_variable(cinfo))
1089 return JPEG_SUSPENDED;
1090 break;
1091
1092 default: /* must be DHP, EXP, JPGn, or RESn */
1093 /* For now, we treat the reserved markers as fatal errors since they are
1094 * likely to be used to signal incompatible JPEG Part 3 extensions.
1095 * Once the JPEG 3 version-number marker is well defined, this code
1096 * ought to change!
1097 */
1098 ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
1099 break;
1100 }
1101 /* Successfully processed marker, so reset state variable */
1102 cinfo->unread_marker = 0;
1103 } /* end loop */
1104 }
1105
1106
1107 /*
1108 * Read a restart marker, which is expected to appear next in the datastream;
1109 * if the marker is not there, take appropriate recovery action.
1110 * Returns FALSE if suspension is required.
1111 *
1112 * This is called by the entropy decoder after it has read an appropriate
1113 * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder
1114 * has already read a marker from the data source. Under normal conditions
1115 * cinfo->unread_marker will be reset to 0 before returning; if not reset,
1116 * it holds a marker which the decoder will be unable to read past.
1117 */
1118
1119 METHODDEF(boolean)
1120 read_restart_marker (j_decompress_ptr cinfo)
1121 {
1122 /* Obtain a marker unless we already did. */
1123 /* Note that next_marker will complain if it skips any data. */
1124 if (cinfo->unread_marker == 0) {
1125 if (! next_marker(cinfo))
1126 return FALSE;
1127 }
1128
1129 if (cinfo->unread_marker ==
1130 ((int) M_RST0 + cinfo->marker->next_restart_num)) {
1131 /* Normal case --- swallow the marker and let entropy decoder continue */
1132 TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num);
1133 cinfo->unread_marker = 0;
1134 } else {
1135 /* Uh-oh, the restart markers have been messed up. */
1136 /* Let the data source manager determine how to resync. */
1137 if (! (*cinfo->src->resync_to_restart) (cinfo,
1138 cinfo->marker->next_restart_num))
1139 return FALSE;
1140 }
1141
1142 /* Update next-restart state */
1143 cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7;
1144
1145 return TRUE;
1146 }
1147
1148
1149 /*
1150 * This is the default resync_to_restart method for data source managers
1151 * to use if they don't have any better approach. Some data source managers
1152 * may be able to back up, or may have additional knowledge about the data
1153 * which permits a more intelligent recovery strategy; such managers would
1154 * presumably supply their own resync method.
1155 *
1156 * read_restart_marker calls resync_to_restart if it finds a marker other than
1157 * the restart marker it was expecting. (This code is *not* used unless
1158 * a nonzero restart interval has been declared.) cinfo->unread_marker is
1159 * the marker code actually found (might be anything, except 0 or FF).
1160 * The desired restart marker number (0..7) is passed as a parameter.
1161 * This routine is supposed to apply whatever error recovery strategy seems
1162 * appropriate in order to position the input stream to the next data segment.
1163 * Note that cinfo->unread_marker is treated as a marker appearing before
1164 * the current data-source input point; usually it should be reset to zero
1165 * before returning.
1166 * Returns FALSE if suspension is required.
1167 *
1168 * This implementation is substantially constrained by wanting to treat the
1169 * input as a data stream; this means we can't back up. Therefore, we have
1170 * only the following actions to work with:
1171 * 1. Simply discard the marker and let the entropy decoder resume at next
1172 * byte of file.
1173 * 2. Read forward until we find another marker, discarding intervening
1174 * data. (In theory we could look ahead within the current bufferload,
1175 * without having to discard data if we don't find the desired marker.
1176 * This idea is not implemented here, in part because it makes behavior
1177 * dependent on buffer size and chance buffer-boundary positions.)
1178 * 3. Leave the marker unread (by failing to zero cinfo->unread_marker).
1179 * This will cause the entropy decoder to process an empty data segment,
1180 * inserting dummy zeroes, and then we will reprocess the marker.
1181 *
1182 * #2 is appropriate if we think the desired marker lies ahead, while #3 is
1183 * appropriate if the found marker is a future restart marker (indicating
1184 * that we have missed the desired restart marker, probably because it got
1185 * corrupted).
1186 * We apply #2 or #3 if the found marker is a restart marker no more than
1187 * two counts behind or ahead of the expected one. We also apply #2 if the
1188 * found marker is not a legal JPEG marker code (it's certainly bogus data).
1189 * If the found marker is a restart marker more than 2 counts away, we do #1
1190 * (too much risk that the marker is erroneous; with luck we will be able to
1191 * resync at some future point).
1192 * For any valid non-restart JPEG marker, we apply #3. This keeps us from
1193 * overrunning the end of a scan. An implementation limited to single-scan
1194 * files might find it better to apply #2 for markers other than EOI, since
1195 * any other marker would have to be bogus data in that case.
1196 */
1197
1198 GLOBAL(boolean)
1199 jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired)
1200 {
1201 int marker = cinfo->unread_marker;
1202 int action = 1;
1203
1204 /* Always put up a warning. */
1205 WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired);
1206
1207 /* Outer loop handles repeated decision after scanning forward. */
1208 for (;;) {
1209 if (marker < (int) M_SOF0)
1210 action = 2; /* invalid marker */
1211 else if (marker < (int) M_RST0 || marker > (int) M_RST7)
1212 action = 3; /* valid non-restart marker */
1213 else {
1214 if (marker == ((int) M_RST0 + ((desired+1) & 7)) ||
1215 marker == ((int) M_RST0 + ((desired+2) & 7)))
1216 action = 3; /* one of the next two expected restarts */
1217 else if (marker == ((int) M_RST0 + ((desired-1) & 7)) ||
1218 marker == ((int) M_RST0 + ((desired-2) & 7)))
1219 action = 2; /* a prior restart, so advance */
1220 else
1221 action = 1; /* desired restart or too far away */
1222 }
1223 TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action);
1224 switch (action) {
1225 case 1:
1226 /* Discard marker and let entropy decoder resume processing. */
1227 cinfo->unread_marker = 0;
1228 return TRUE;
1229 case 2:
1230 /* Scan to the next marker, and repeat the decision loop. */
1231 if (! next_marker(cinfo))
1232 return FALSE;
1233 marker = cinfo->unread_marker;
1234 break;
1235 case 3:
1236 /* Return without advancing past this marker. */
1237 /* Entropy decoder will be forced to process an empty segment. */
1238 return TRUE;
1239 }
1240 } /* end loop */
1241 }
1242
1243
1244 /*
1245 * Reset marker processing state to begin a fresh datastream.
1246 */
1247
1248 METHODDEF(void)
1249 reset_marker_reader (j_decompress_ptr cinfo)
1250 {
1251 my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
1252
1253 cinfo->comp_info = NULL; /* until allocated by get_sof */
1254 cinfo->input_scan_number = 0; /* no SOS seen yet */
1255 cinfo->unread_marker = 0; /* no pending marker */
1256 marker->pub.saw_SOI = FALSE; /* set internal state too */
1257 marker->pub.saw_SOF = FALSE;
1258 marker->pub.discarded_bytes = 0;
1259 marker->cur_marker = NULL;
1260 }
1261
1262
1263 /*
1264 * Initialize the marker reader module.
1265 * This is called only once, when the decompression object is created.
1266 */
1267
1268 GLOBAL(void)
1269 jinit_marker_reader (j_decompress_ptr cinfo)
1270 {
1271 my_marker_ptr marker;
1272 int i;
1273
1274 /* Create subobject in permanent pool */
1275 marker = (my_marker_ptr)
1276 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
1277 SIZEOF(my_marker_reader));
1278 cinfo->marker = (struct jpeg_marker_reader *) marker;
1279 /* Initialize public method pointers */
1280 marker->pub.reset_marker_reader = reset_marker_reader;
1281 marker->pub.read_markers = read_markers;
1282 marker->pub.read_restart_marker = read_restart_marker;
1283 /* Initialize COM/APPn processing.
1284 * By default, we examine and then discard APP0 and APP14,
1285 * but simply discard COM and all other APPn.
1286 */
1287 marker->process_COM = skip_variable;
1288 marker->length_limit_COM = 0;
1289 for (i = 0; i < 16; i++) {
1290 marker->process_APPn[i] = skip_variable;
1291 marker->length_limit_APPn[i] = 0;
1292 }
1293 marker->process_APPn[0] = get_interesting_appn;
1294 marker->process_APPn[14] = get_interesting_appn;
1295 /* Reset marker processing state */
1296 reset_marker_reader(cinfo);
1297 }
1298
1299
1300 /*
1301 * Control saving of COM and APPn markers into marker_list.
1302 */
1303
1304 #ifdef SAVE_MARKERS_SUPPORTED
1305
1306 GLOBAL(void)
1307 jpeg_save_markers (j_decompress_ptr cinfo, int marker_code,
1308 unsigned int length_limit)
1309 {
1310 my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
1311 long maxlength;
1312 jpeg_marker_parser_method processor;
1313
1314 /* Length limit must not be larger than what we can allocate
1315 * (should only be a concern in a 16-bit environment).
1316 */
1317 maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct);
1318 if (((long) length_limit) > maxlength)
1319 length_limit = (unsigned int) maxlength;
1320
1321 /* Choose processor routine to use.
1322 * APP0/APP14 have special requirements.
1323 */
1324 if (length_limit) {
1325 processor = save_marker;
1326 /* If saving APP0/APP14, save at least enough for our internal use. */
1327 if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN)
1328 length_limit = APP0_DATA_LEN;
1329 else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN)
1330 length_limit = APP14_DATA_LEN;
1331 } else {
1332 processor = skip_variable;
1333 /* If discarding APP0/APP14, use our regular on-the-fly processor. */
1334 if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14)
1335 processor = get_interesting_appn;
1336 }
1337
1338 if (marker_code == (int) M_COM) {
1339 marker->process_COM = processor;
1340 marker->length_limit_COM = length_limit;
1341 } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) {
1342 marker->process_APPn[marker_code - (int) M_APP0] = processor;
1343 marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit;
1344 } else
1345 ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
1346 }
1347
1348 #endif /* SAVE_MARKERS_SUPPORTED */
1349
1350
1351 /*
1352 * Install a special processing method for COM or APPn markers.
1353 */
1354
1355 GLOBAL(void)
1356 jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
1357 jpeg_marker_parser_method routine)
1358 {
1359 my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
1360
1361 if (marker_code == (int) M_COM)
1362 marker->process_COM = routine;
1363 else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15)
1364 marker->process_APPn[marker_code - (int) M_APP0] = routine;
1365 else
1366 ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
1367 }