| 1 |
/* |
| 2 |
* jccoefct.c |
| 3 |
* |
| 4 |
* Copyright (C) 1994-1997, Thomas G. Lane. |
| 5 |
* This file is part of the Independent JPEG Group's software. |
| 6 |
* For conditions of distribution and use, see the accompanying README file. |
| 7 |
* |
| 8 |
* This file contains the coefficient buffer controller for compression. |
| 9 |
* This controller is the top level of the JPEG compressor proper. |
| 10 |
* The coefficient buffer lies between forward-DCT and entropy encoding steps. |
| 11 |
*/ |
| 12 |
|
| 13 |
#define JPEG_INTERNALS |
| 14 |
#include "jinclude.h" |
| 15 |
#include "jpeglib.h" |
| 16 |
|
| 17 |
#include "cpl_port.h" |
| 18 |
|
| 19 |
/* We use a full-image coefficient buffer when doing Huffman optimization, |
| 20 |
* and also for writing multiple-scan JPEG files. In all cases, the DCT |
| 21 |
* step is run during the first pass, and subsequent passes need only read |
| 22 |
* the buffered coefficients. |
| 23 |
*/ |
| 24 |
#ifdef ENTROPY_OPT_SUPPORTED |
| 25 |
#define FULL_COEF_BUFFER_SUPPORTED |
| 26 |
#else |
| 27 |
#ifdef C_MULTISCAN_FILES_SUPPORTED |
| 28 |
#define FULL_COEF_BUFFER_SUPPORTED |
| 29 |
#endif |
| 30 |
#endif |
| 31 |
|
| 32 |
|
| 33 |
/* Private buffer controller object */ |
| 34 |
|
| 35 |
typedef struct { |
| 36 |
struct jpeg_c_coef_controller pub; /* public fields */ |
| 37 |
|
| 38 |
JDIMENSION iMCU_row_num; /* iMCU row # within image */ |
| 39 |
JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ |
| 40 |
int MCU_vert_offset; /* counts MCU rows within iMCU row */ |
| 41 |
int MCU_rows_per_iMCU_row; /* number of such rows needed */ |
| 42 |
|
| 43 |
/* For single-pass compression, it's sufficient to buffer just one MCU |
| 44 |
* (although this may prove a bit slow in practice). We allocate a |
| 45 |
* workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each |
| 46 |
* MCU constructed and sent. (On 80x86, the workspace is FAR even though |
| 47 |
* it's not really very big; this is to keep the module interfaces unchanged |
| 48 |
* when a large coefficient buffer is necessary.) |
| 49 |
* In multi-pass modes, this array points to the current MCU's blocks |
| 50 |
* within the virtual arrays. |
| 51 |
*/ |
| 52 |
JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; |
| 53 |
|
| 54 |
/* In multi-pass modes, we need a virtual block array for each component. */ |
| 55 |
jvirt_barray_ptr whole_image[MAX_COMPONENTS]; |
| 56 |
} my_coef_controller; |
| 57 |
|
| 58 |
typedef my_coef_controller * my_coef_ptr; |
| 59 |
|
| 60 |
|
| 61 |
/* Forward declarations */ |
| 62 |
METHODDEF(boolean) compress_data |
| 63 |
JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); |
| 64 |
#ifdef FULL_COEF_BUFFER_SUPPORTED |
| 65 |
METHODDEF(boolean) compress_first_pass |
| 66 |
JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); |
| 67 |
METHODDEF(boolean) compress_output |
| 68 |
JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); |
| 69 |
#endif |
| 70 |
|
| 71 |
|
| 72 |
LOCAL(void) |
| 73 |
start_iMCU_row (j_compress_ptr cinfo) |
| 74 |
/* Reset within-iMCU-row counters for a new row */ |
| 75 |
{ |
| 76 |
my_coef_ptr coef = (my_coef_ptr) cinfo->coef; |
| 77 |
|
| 78 |
/* In an interleaved scan, an MCU row is the same as an iMCU row. |
| 79 |
* In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. |
| 80 |
* But at the bottom of the image, process only what's left. |
| 81 |
*/ |
| 82 |
if (cinfo->comps_in_scan > 1) { |
| 83 |
coef->MCU_rows_per_iMCU_row = 1; |
| 84 |
} else { |
| 85 |
if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) |
| 86 |
coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; |
| 87 |
else |
| 88 |
coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; |
| 89 |
} |
| 90 |
|
| 91 |
coef->mcu_ctr = 0; |
| 92 |
coef->MCU_vert_offset = 0; |
| 93 |
} |
| 94 |
|
| 95 |
|
| 96 |
/* |
| 97 |
* Initialize for a processing pass. |
| 98 |
*/ |
| 99 |
|
| 100 |
METHODDEF(void) |
| 101 |
start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) |
| 102 |
{ |
| 103 |
my_coef_ptr coef = (my_coef_ptr) cinfo->coef; |
| 104 |
|
| 105 |
coef->iMCU_row_num = 0; |
| 106 |
start_iMCU_row(cinfo); |
| 107 |
|
| 108 |
switch (pass_mode) { |
| 109 |
case JBUF_PASS_THRU: |
| 110 |
if (coef->whole_image[0] != NULL) |
| 111 |
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); |
| 112 |
coef->pub.compress_data = compress_data; |
| 113 |
break; |
| 114 |
#ifdef FULL_COEF_BUFFER_SUPPORTED |
| 115 |
case JBUF_SAVE_AND_PASS: |
| 116 |
if (coef->whole_image[0] == NULL) |
| 117 |
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); |
| 118 |
coef->pub.compress_data = compress_first_pass; |
| 119 |
break; |
| 120 |
case JBUF_CRANK_DEST: |
| 121 |
if (coef->whole_image[0] == NULL) |
| 122 |
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); |
| 123 |
coef->pub.compress_data = compress_output; |
| 124 |
break; |
| 125 |
#endif |
| 126 |
default: |
| 127 |
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); |
| 128 |
break; |
| 129 |
} |
| 130 |
} |
| 131 |
|
| 132 |
|
| 133 |
/* |
| 134 |
* Process some data in the single-pass case. |
| 135 |
* We process the equivalent of one fully interleaved MCU row ("iMCU" row) |
| 136 |
* per call, i.e. v_samp_factor block rows for each component in the image. |
| 137 |
* Returns TRUE if the iMCU row is completed, FALSE if suspended. |
| 138 |
* |
| 139 |
* NB: input_buf contains a plane for each component in image, |
| 140 |
* which we index according to the component's SOF position. |
| 141 |
*/ |
| 142 |
|
| 143 |
METHODDEF(boolean) |
| 144 |
compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) |
| 145 |
{ |
| 146 |
my_coef_ptr coef = (my_coef_ptr) cinfo->coef; |
| 147 |
JDIMENSION MCU_col_num; /* index of current MCU within row */ |
| 148 |
JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; |
| 149 |
JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; |
| 150 |
int blkn, bi, ci, yindex, yoffset, blockcnt; |
| 151 |
JDIMENSION ypos, xpos; |
| 152 |
jpeg_component_info *compptr; |
| 153 |
|
| 154 |
/* Loop to write as much as one whole iMCU row */ |
| 155 |
for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; |
| 156 |
yoffset++) { |
| 157 |
for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; |
| 158 |
MCU_col_num++) { |
| 159 |
/* Determine where data comes from in input_buf and do the DCT thing. |
| 160 |
* Each call on forward_DCT processes a horizontal row of DCT blocks |
| 161 |
* as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks |
| 162 |
* sequentially. Dummy blocks at the right or bottom edge are filled in |
| 163 |
* specially. The data in them does not matter for image reconstruction, |
| 164 |
* so we fill them with values that will encode to the smallest amount of |
| 165 |
* data, viz: all zeroes in the AC entries, DC entries equal to previous |
| 166 |
* block's DC value. (Thanks to Thomas Kinsman for this idea.) |
| 167 |
*/ |
| 168 |
blkn = 0; |
| 169 |
for (ci = 0; ci < cinfo->comps_in_scan; ci++) { |
| 170 |
compptr = cinfo->cur_comp_info[ci]; |
| 171 |
blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width |
| 172 |
: compptr->last_col_width; |
| 173 |
xpos = MCU_col_num * compptr->MCU_sample_width; |
| 174 |
ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */ |
| 175 |
for (yindex = 0; yindex < compptr->MCU_height; yindex++) { |
| 176 |
if (coef->iMCU_row_num < last_iMCU_row || |
| 177 |
yoffset+yindex < compptr->last_row_height) { |
| 178 |
(*cinfo->fdct->forward_DCT) (cinfo, compptr, |
| 179 |
input_buf[compptr->component_index], |
| 180 |
coef->MCU_buffer[blkn], |
| 181 |
ypos, xpos, (JDIMENSION) blockcnt); |
| 182 |
if (blockcnt < compptr->MCU_width) { |
| 183 |
/* Create some dummy blocks at the right edge of the image. */ |
| 184 |
jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], |
| 185 |
(compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); |
| 186 |
for (bi = blockcnt; bi < compptr->MCU_width; bi++) { |
| 187 |
coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; |
| 188 |
} |
| 189 |
} |
| 190 |
} else { |
| 191 |
/* Create a row of dummy blocks at the bottom of the image. */ |
| 192 |
jzero_far((void FAR *) coef->MCU_buffer[blkn], |
| 193 |
compptr->MCU_width * SIZEOF(JBLOCK)); |
| 194 |
for (bi = 0; bi < compptr->MCU_width; bi++) { |
| 195 |
coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; |
| 196 |
} |
| 197 |
} |
| 198 |
blkn += compptr->MCU_width; |
| 199 |
ypos += DCTSIZE; |
| 200 |
} |
| 201 |
} |
| 202 |
/* Try to write the MCU. In event of a suspension failure, we will |
| 203 |
* re-DCT the MCU on restart (a bit inefficient, could be fixed...) |
| 204 |
*/ |
| 205 |
if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { |
| 206 |
/* Suspension forced; update state counters and exit */ |
| 207 |
coef->MCU_vert_offset = yoffset; |
| 208 |
coef->mcu_ctr = MCU_col_num; |
| 209 |
return FALSE; |
| 210 |
} |
| 211 |
} |
| 212 |
/* Completed an MCU row, but perhaps not an iMCU row */ |
| 213 |
coef->mcu_ctr = 0; |
| 214 |
} |
| 215 |
/* Completed the iMCU row, advance counters for next one */ |
| 216 |
coef->iMCU_row_num++; |
| 217 |
start_iMCU_row(cinfo); |
| 218 |
return TRUE; |
| 219 |
} |
| 220 |
|
| 221 |
|
| 222 |
#ifdef FULL_COEF_BUFFER_SUPPORTED |
| 223 |
|
| 224 |
/* |
| 225 |
* Process some data in the first pass of a multi-pass case. |
| 226 |
* We process the equivalent of one fully interleaved MCU row ("iMCU" row) |
| 227 |
* per call, i.e. v_samp_factor block rows for each component in the image. |
| 228 |
* This amount of data is read from the source buffer, DCT'd and quantized, |
| 229 |
* and saved into the virtual arrays. We also generate suitable dummy blocks |
| 230 |
* as needed at the right and lower edges. (The dummy blocks are constructed |
| 231 |
* in the virtual arrays, which have been padded appropriately.) This makes |
| 232 |
* it possible for subsequent passes not to worry about real vs. dummy blocks. |
| 233 |
* |
| 234 |
* We must also emit the data to the entropy encoder. This is conveniently |
| 235 |
* done by calling compress_output() after we've loaded the current strip |
| 236 |
* of the virtual arrays. |
| 237 |
* |
| 238 |
* NB: input_buf contains a plane for each component in image. All |
| 239 |
* components are DCT'd and loaded into the virtual arrays in this pass. |
| 240 |
* However, it may be that only a subset of the components are emitted to |
| 241 |
* the entropy encoder during this first pass; be careful about looking |
| 242 |
* at the scan-dependent variables (MCU dimensions, etc). |
| 243 |
*/ |
| 244 |
|
| 245 |
METHODDEF(boolean) |
| 246 |
compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) |
| 247 |
{ |
| 248 |
my_coef_ptr coef = (my_coef_ptr) cinfo->coef; |
| 249 |
JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; |
| 250 |
JDIMENSION blocks_across, MCUs_across, MCUindex; |
| 251 |
int bi, ci, h_samp_factor, block_row, block_rows, ndummy; |
| 252 |
JCOEF lastDC; |
| 253 |
jpeg_component_info *compptr; |
| 254 |
JBLOCKARRAY buffer; |
| 255 |
JBLOCKROW thisblockrow, lastblockrow; |
| 256 |
|
| 257 |
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; |
| 258 |
ci++, compptr++) { |
| 259 |
/* Align the virtual buffer for this component. */ |
| 260 |
buffer = (*cinfo->mem->access_virt_barray) |
| 261 |
((j_common_ptr) cinfo, coef->whole_image[ci], |
| 262 |
coef->iMCU_row_num * compptr->v_samp_factor, |
| 263 |
(JDIMENSION) compptr->v_samp_factor, TRUE); |
| 264 |
/* Count non-dummy DCT block rows in this iMCU row. */ |
| 265 |
if (coef->iMCU_row_num < last_iMCU_row) |
| 266 |
block_rows = compptr->v_samp_factor; |
| 267 |
else { |
| 268 |
/* NB: can't use last_row_height here, since may not be set! */ |
| 269 |
block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); |
| 270 |
if (block_rows == 0) block_rows = compptr->v_samp_factor; |
| 271 |
} |
| 272 |
blocks_across = compptr->width_in_blocks; |
| 273 |
h_samp_factor = compptr->h_samp_factor; |
| 274 |
/* Count number of dummy blocks to be added at the right margin. */ |
| 275 |
ndummy = (int) (blocks_across % h_samp_factor); |
| 276 |
if (ndummy > 0) |
| 277 |
ndummy = h_samp_factor - ndummy; |
| 278 |
/* Perform DCT for all non-dummy blocks in this iMCU row. Each call |
| 279 |
* on forward_DCT processes a complete horizontal row of DCT blocks. |
| 280 |
*/ |
| 281 |
for (block_row = 0; block_row < block_rows; block_row++) { |
| 282 |
thisblockrow = buffer[block_row]; |
| 283 |
(*cinfo->fdct->forward_DCT) (cinfo, compptr, |
| 284 |
input_buf[ci], thisblockrow, |
| 285 |
(JDIMENSION) (block_row * DCTSIZE), |
| 286 |
(JDIMENSION) 0, blocks_across); |
| 287 |
if (ndummy > 0) { |
| 288 |
/* Create dummy blocks at the right edge of the image. */ |
| 289 |
thisblockrow += blocks_across; /* => first dummy block */ |
| 290 |
jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); |
| 291 |
lastDC = thisblockrow[-1][0]; |
| 292 |
for (bi = 0; bi < ndummy; bi++) { |
| 293 |
thisblockrow[bi][0] = lastDC; |
| 294 |
} |
| 295 |
} |
| 296 |
} |
| 297 |
/* If at end of image, create dummy block rows as needed. |
| 298 |
* The tricky part here is that within each MCU, we want the DC values |
| 299 |
* of the dummy blocks to match the last real block's DC value. |
| 300 |
* This squeezes a few more bytes out of the resulting file... |
| 301 |
*/ |
| 302 |
if (coef->iMCU_row_num == last_iMCU_row) { |
| 303 |
blocks_across += ndummy; /* include lower right corner */ |
| 304 |
MCUs_across = blocks_across / h_samp_factor; |
| 305 |
for (block_row = block_rows; block_row < compptr->v_samp_factor; |
| 306 |
block_row++) { |
| 307 |
thisblockrow = buffer[block_row]; |
| 308 |
lastblockrow = buffer[block_row-1]; |
| 309 |
jzero_far((void FAR *) thisblockrow, |
| 310 |
(size_t) (blocks_across * SIZEOF(JBLOCK))); |
| 311 |
for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { |
| 312 |
lastDC = lastblockrow[h_samp_factor-1][0]; |
| 313 |
for (bi = 0; bi < h_samp_factor; bi++) { |
| 314 |
thisblockrow[bi][0] = lastDC; |
| 315 |
} |
| 316 |
thisblockrow += h_samp_factor; /* advance to next MCU in row */ |
| 317 |
lastblockrow += h_samp_factor; |
| 318 |
} |
| 319 |
} |
| 320 |
} |
| 321 |
} |
| 322 |
/* NB: compress_output will increment iMCU_row_num if successful. |
| 323 |
* A suspension return will result in redoing all the work above next time. |
| 324 |
*/ |
| 325 |
|
| 326 |
/* Emit data to the entropy encoder, sharing code with subsequent passes */ |
| 327 |
return compress_output(cinfo, input_buf); |
| 328 |
} |
| 329 |
|
| 330 |
|
| 331 |
/* |
| 332 |
* Process some data in subsequent passes of a multi-pass case. |
| 333 |
* We process the equivalent of one fully interleaved MCU row ("iMCU" row) |
| 334 |
* per call, ie, v_samp_factor block rows for each component in the scan. |
| 335 |
* The data is obtained from the virtual arrays and fed to the entropy coder. |
| 336 |
* Returns TRUE if the iMCU row is completed, FALSE if suspended. |
| 337 |
* |
| 338 |
* NB: input_buf is ignored; it is likely to be a NULL pointer. |
| 339 |
*/ |
| 340 |
|
| 341 |
METHODDEF(boolean) |
| 342 |
compress_output (j_compress_ptr cinfo, CPL_UNUSED JSAMPIMAGE input_buf) |
| 343 |
{ |
| 344 |
my_coef_ptr coef = (my_coef_ptr) cinfo->coef; |
| 345 |
JDIMENSION MCU_col_num; /* index of current MCU within row */ |
| 346 |
int blkn, ci, xindex, yindex, yoffset; |
| 347 |
JDIMENSION start_col; |
| 348 |
JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; |
| 349 |
JBLOCKROW buffer_ptr; |
| 350 |
jpeg_component_info *compptr; |
| 351 |
|
| 352 |
/* Align the virtual buffers for the components used in this scan. |
| 353 |
* NB: during first pass, this is safe only because the buffers will |
| 354 |
* already be aligned properly, so jmemmgr.c won't need to do any I/O. |
| 355 |
*/ |
| 356 |
for (ci = 0; ci < cinfo->comps_in_scan; ci++) { |
| 357 |
compptr = cinfo->cur_comp_info[ci]; |
| 358 |
buffer[ci] = (*cinfo->mem->access_virt_barray) |
| 359 |
((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], |
| 360 |
coef->iMCU_row_num * compptr->v_samp_factor, |
| 361 |
(JDIMENSION) compptr->v_samp_factor, FALSE); |
| 362 |
} |
| 363 |
|
| 364 |
/* Loop to process one whole iMCU row */ |
| 365 |
for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; |
| 366 |
yoffset++) { |
| 367 |
for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; |
| 368 |
MCU_col_num++) { |
| 369 |
/* Construct list of pointers to DCT blocks belonging to this MCU */ |
| 370 |
blkn = 0; /* index of current DCT block within MCU */ |
| 371 |
for (ci = 0; ci < cinfo->comps_in_scan; ci++) { |
| 372 |
compptr = cinfo->cur_comp_info[ci]; |
| 373 |
start_col = MCU_col_num * compptr->MCU_width; |
| 374 |
for (yindex = 0; yindex < compptr->MCU_height; yindex++) { |
| 375 |
buffer_ptr = buffer[ci][yindex+yoffset] + start_col; |
| 376 |
for (xindex = 0; xindex < compptr->MCU_width; xindex++) { |
| 377 |
coef->MCU_buffer[blkn++] = buffer_ptr++; |
| 378 |
} |
| 379 |
} |
| 380 |
} |
| 381 |
/* Try to write the MCU. */ |
| 382 |
if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { |
| 383 |
/* Suspension forced; update state counters and exit */ |
| 384 |
coef->MCU_vert_offset = yoffset; |
| 385 |
coef->mcu_ctr = MCU_col_num; |
| 386 |
return FALSE; |
| 387 |
} |
| 388 |
} |
| 389 |
/* Completed an MCU row, but perhaps not an iMCU row */ |
| 390 |
coef->mcu_ctr = 0; |
| 391 |
} |
| 392 |
/* Completed the iMCU row, advance counters for next one */ |
| 393 |
coef->iMCU_row_num++; |
| 394 |
start_iMCU_row(cinfo); |
| 395 |
return TRUE; |
| 396 |
} |
| 397 |
|
| 398 |
#endif /* FULL_COEF_BUFFER_SUPPORTED */ |
| 399 |
|
| 400 |
|
| 401 |
/* |
| 402 |
* Initialize coefficient buffer controller. |
| 403 |
*/ |
| 404 |
|
| 405 |
GLOBAL(void) |
| 406 |
jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) |
| 407 |
{ |
| 408 |
my_coef_ptr coef; |
| 409 |
|
| 410 |
coef = (my_coef_ptr) |
| 411 |
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, |
| 412 |
SIZEOF(my_coef_controller)); |
| 413 |
cinfo->coef = (struct jpeg_c_coef_controller *) coef; |
| 414 |
coef->pub.start_pass = start_pass_coef; |
| 415 |
|
| 416 |
/* Create the coefficient buffer. */ |
| 417 |
if (need_full_buffer) { |
| 418 |
#ifdef FULL_COEF_BUFFER_SUPPORTED |
| 419 |
/* Allocate a full-image virtual array for each component, */ |
| 420 |
/* padded to a multiple of samp_factor DCT blocks in each direction. */ |
| 421 |
int ci; |
| 422 |
jpeg_component_info *compptr; |
| 423 |
|
| 424 |
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; |
| 425 |
ci++, compptr++) { |
| 426 |
coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) |
| 427 |
((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, |
| 428 |
(JDIMENSION) jround_up((long) compptr->width_in_blocks, |
| 429 |
(long) compptr->h_samp_factor), |
| 430 |
(JDIMENSION) jround_up((long) compptr->height_in_blocks, |
| 431 |
(long) compptr->v_samp_factor), |
| 432 |
(JDIMENSION) compptr->v_samp_factor); |
| 433 |
} |
| 434 |
#else |
| 435 |
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); |
| 436 |
#endif |
| 437 |
} else { |
| 438 |
/* We only need a single-MCU buffer. */ |
| 439 |
JBLOCKROW buffer; |
| 440 |
int i; |
| 441 |
|
| 442 |
buffer = (JBLOCKROW) |
| 443 |
(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, |
| 444 |
C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); |
| 445 |
for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { |
| 446 |
coef->MCU_buffer[i] = buffer + i; |
| 447 |
} |
| 448 |
coef->whole_image[0] = NULL; /* flag for no virtual arrays */ |
| 449 |
} |
| 450 |
} |