| 1 |
# Copyright (C) 2015-2025 Free Software Foundation, Inc. |
| 2 |
|
| 3 |
# This program is free software; you can redistribute it and/or modify |
| 4 |
# it under the terms of the GNU General Public License as published by |
| 5 |
# the Free Software Foundation; either version 3 of the License, or |
| 6 |
# (at your option) any later version. |
| 7 |
# |
| 8 |
# This program is distributed in the hope that it will be useful, |
| 9 |
# but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 |
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 |
# GNU General Public License for more details. |
| 12 |
# |
| 13 |
# You should have received a copy of the GNU General Public License |
| 14 |
# along with this program; if not, write to the Free Software |
| 15 |
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| 16 |
|
| 17 |
# GCC testsuite that uses the `dg.exp' driver. |
| 18 |
|
| 19 |
# Exit immediately if this isn't the right target. |
| 20 |
if { ![istarget msp430-*-*] } then { |
| 21 |
return |
| 22 |
} |
| 23 |
|
| 24 |
# Below are msp430-specific effective target keywords, required for checking |
| 25 |
# device related warnings/errors |
| 26 |
proc check_effective_target_msp430_430_selected { } { |
| 27 |
return [check-flags [list "" { *-*-* } { "-mcpu=msp430" } { "" } ]] |
| 28 |
} |
| 29 |
|
| 30 |
proc check_effective_target_msp430_430x_selected { } { |
| 31 |
return [check-flags [list "" { *-*-* } \ |
| 32 |
{ "-mcpu=msp430x" "-mcpu=msp430xv2" } { "" } ]] |
| 33 |
} |
| 34 |
|
| 35 |
proc check_effective_target_msp430_mlarge_selected { } { |
| 36 |
return [check-flags [list "" { *-*-* } { "-mlarge" } { "" } ]] |
| 37 |
} |
| 38 |
|
| 39 |
proc check_effective_target_msp430_region_not_lower { } { |
| 40 |
return [check-flags [list "" { *-*-* } { "-mdata-region=none" "-mdata-region=upper" "-mdata-region=either" } { "" } ]] |
| 41 |
} |
| 42 |
|
| 43 |
proc check_effective_target_msp430_region_lower { } { |
| 44 |
return [check-flags [list "" { *-*-* } { "*" } { "-mdata-region=none" "-mdata-region=upper" "-mdata-region=either" } ]] |
| 45 |
} |
| 46 |
|
| 47 |
proc check_effective_target_msp430_hwmul_not_none { } { |
| 48 |
return [check-flags [list "" { *-*-* } \ |
| 49 |
{ "-mhwmult=16bit" "-mhwmult=32bit" "-mhwmult=f5series" } { "" } ]] |
| 50 |
} |
| 51 |
|
| 52 |
proc check_effective_target_msp430_hwmul_not_16bit { } { |
| 53 |
return [check-flags [list "" { *-*-* } \ |
| 54 |
{ "-mhwmult=f5series" "-mhwmult=32bit" } { "" } ]] |
| 55 |
} |
| 56 |
|
| 57 |
proc check_effective_target_msp430_hwmul_not_32bit { } { |
| 58 |
return [check-flags [list "" { *-*-* } \ |
| 59 |
{ "-mhwmult=16bit" "-mhwmult=f5series" } { "" } ]] |
| 60 |
} |
| 61 |
|
| 62 |
proc check_effective_target_msp430_hwmul_not_f5 { } { |
| 63 |
return [check-flags [list "" { *-*-* } \ |
| 64 |
{ "-mhwmult=16bit" "-mhwmult=32bit" } { "" } ]] |
| 65 |
} |
| 66 |
|
| 67 |
# Return a list of msp430-specific options we can run the test with. |
| 68 |
# The mcu name is extracted from the file name, not from the -mmcu option |
| 69 |
# specified in the test file. |
| 70 |
proc msp430_get_opts { test_file } { |
| 71 |
global board_info |
| 72 |
# If the mcu name is not recognized, run the test as normal without |
| 73 |
# additional options. |
| 74 |
if { ![regexp {[a-z0-9]+430[a-z0-9_]+(?=\.c)} $test_file mcu_name] } { |
| 75 |
return { "" } |
| 76 |
} |
| 77 |
# If the testsuite has been invoked with specific MSP430 options, don't run |
| 78 |
# in this torture style. |
| 79 |
set multi_flags [board_info [target_info name] multilib_flags] |
| 80 |
if { [string match "*mlarge*" $multi_flags] |
| 81 |
|| [string match "*msmall*" $multi_flags] |
| 82 |
|| [string match "*mcpu*" $multi_flags] |
| 83 |
|| [string match "*mmcu*" $multi_flags] |
| 84 |
|| [string match "*mhwmult*" $multi_flags] } { |
| 85 |
return { "" } |
| 86 |
} |
| 87 |
# Test all device related options. The compiler will warn about |
| 88 |
# incompatibilities, so ensure dg-warning or dg-error directives are set up |
| 89 |
# in the test sources. |
| 90 |
return {"" -mhwmult=none -mhwmult=16bit -mhwmult=32bit -mhwmult=f5series \ |
| 91 |
-mcpu=msp430 -mcpu=msp430x -mcpu=msp430xv2 -mlarge} |
| 92 |
} |
| 93 |
|
| 94 |
# Run each test file in 'tests' with every possible value for -mcpu and |
| 95 |
# -mhwmult, and with -mlarge. |
| 96 |
proc msp430_device_permutations_runtest { tests } { |
| 97 |
# The specific tests being run |
| 98 |
global runtests |
| 99 |
global MSP430_DEFAULT_CFLAGS |
| 100 |
foreach { test_file } $tests { |
| 101 |
if { ![runtest_file_p $runtests $test_file] } { |
| 102 |
continue |
| 103 |
} |
| 104 |
# The device name passed to -mmcu in the csv-using-* tests do not exist |
| 105 |
# in the hard-coded data, to ensure the test fails if the method can't |
| 106 |
# find the device data. |
| 107 |
if { [file tail $test_file] eq "csv-using-installed.c" } { |
| 108 |
msp430_test_installed_device_data $test_file $MSP430_DEFAULT_CFLAGS |
| 109 |
continue |
| 110 |
} elseif { [file tail $test_file] eq "csv-using-option.c" } { |
| 111 |
dg-runtest $test_file \ |
| 112 |
"-mdevices-csv-loc=[file dirname $test_file]/devices.csv" \ |
| 113 |
"$MSP430_DEFAULT_CFLAGS" |
| 114 |
continue |
| 115 |
} elseif { [file tail $test_file] eq "csv-using-env-var.c" } { |
| 116 |
setenv MSP430_GCC_INCLUDE_DIR [file dirname $test_file] |
| 117 |
verbose -log "MSP430_GCC_INCLUDE_DIR=[file dirname $test_file]" |
| 118 |
dg-runtest $test_file "" "$MSP430_DEFAULT_CFLAGS" |
| 119 |
setenv MSP430_GCC_INCLUDE_DIR "" |
| 120 |
verbose -log "MSP430_GCC_INCLUDE_DIR=\"\"" |
| 121 |
continue |
| 122 |
} |
| 123 |
foreach { mcu_flags } [msp430_get_opts $test_file] { |
| 124 |
if { [string match "csv-*" [file tail $test_file]] } { |
| 125 |
# Specify the path to devices.csv for devices/csv-* tests with -I. |
| 126 |
# Note that the csv-* tests do not have dg-options directives, |
| 127 |
# they only have dg-additional-options to pass -mmcu. This is |
| 128 |
# so we can set the path to devices.csv as a "default" flag |
| 129 |
# with -I, and the path won't show up in the test results |
| 130 |
# summary. If there were dg-options directives, then these |
| 131 |
# default flags passed as the 3rd argument to dg-runtest would |
| 132 |
# not be used. |
| 133 |
dg-runtest $test_file "$mcu_flags" "-I[file dirname $test_file] $MSP430_DEFAULT_CFLAGS" |
| 134 |
} elseif { [string match "bad-devices*" [file tail $test_file]] } { |
| 135 |
dg-runtest $test_file "$mcu_flags" "-mdevices-csv-loc=[file dirname $test_file]/[file tail $test_file]sv $MSP430_DEFAULT_CFLAGS" |
| 136 |
} else { |
| 137 |
dg-runtest $test_file "$mcu_flags -DTESTING_HARD_DATA" "$MSP430_DEFAULT_CFLAGS" |
| 138 |
} |
| 139 |
} |
| 140 |
} |
| 141 |
} |
| 142 |
|
| 143 |
|
| 144 |
# Return $TOOLCHAIN_ROOT/$target_alias/include/devices/ |
| 145 |
# target_alias is expected to be either msp430-elf or msp430-elfbare. |
| 146 |
proc get_installed_device_data_path { } { |
| 147 |
global target_alias |
| 148 |
set compiler [lindex [regexp -all -inline {\S+} \ |
| 149 |
[board_info [target_info name] compiler]] 0] |
| 150 |
# $compiler is actually a file, but normalize will still get us the desired |
| 151 |
# result. |
| 152 |
return [file normalize \ |
| 153 |
"$compiler/../../$target_alias/include/devices/devices.csv"] |
| 154 |
} |
| 155 |
|
| 156 |
# If the devices.csv is installed in |
| 157 |
# $TOOLCHAIN_ROOT/$target_alias/include/devices/, rename it so it doesn't |
| 158 |
# interfere with the hard-coded device data tests. |
| 159 |
proc msp430_hide_installed_devices_data { } { |
| 160 |
set devices_path [get_installed_device_data_path] |
| 161 |
if { [file exists $devices_path] } { |
| 162 |
file rename $devices_path "$devices_path.bak" |
| 163 |
} |
| 164 |
} |
| 165 |
|
| 166 |
# Restore devices.csv if renamed by msp430_hide_installed_devices_data. |
| 167 |
proc msp430_restore_installed_devices_data { } { |
| 168 |
set devices_path [get_installed_device_data_path] |
| 169 |
if { [file exists "$devices_path.bak"] } { |
| 170 |
file rename "$devices_path.bak" $devices_path |
| 171 |
} |
| 172 |
} |
| 173 |
|
| 174 |
proc msp430_test_installed_device_data { name default_cflags } { |
| 175 |
global subdir |
| 176 |
global env |
| 177 |
|
| 178 |
# The initial value for GCC_EXEC_PREFIX set by target-libpath.exp is not |
| 179 |
# correct for cross-compilers so fix it here. GCC fixes the value itself, |
| 180 |
# but not after spec functions are executed, which can cause a warning |
| 181 |
# about missing devices.csv to be emitted. |
| 182 |
set compiler [lindex [regexp -all -inline {\S+} \ |
| 183 |
[board_info [target_info name] compiler]] 0] |
| 184 |
set real_exec_prefix "[file normalize "$compiler/../../lib/gcc"]/" |
| 185 |
setenv GCC_EXEC_PREFIX $real_exec_prefix |
| 186 |
|
| 187 |
msp430_restore_installed_devices_data |
| 188 |
set devices_path [get_installed_device_data_path] |
| 189 |
if { [file exists $devices_path] } { |
| 190 |
dg-runtest $name "" "$default_cflags" |
| 191 |
} else { |
| 192 |
set shorter_name "$subdir/[file tail $name]" |
| 193 |
verbose -log "$shorter_name not supported, $devices_path doesn't exist." |
| 194 |
unsupported $shorter_name |
| 195 |
} |
| 196 |
msp430_hide_installed_devices_data |
| 197 |
} |
| 198 |
|
| 199 |
proc msp430_install_device_data { testsuite_dir } { |
| 200 |
set devices_path [get_installed_device_data_path] |
| 201 |
if { [file exists $devices_path] } { |
| 202 |
return |
| 203 |
} |
| 204 |
set installed_path [file dirname $devices_path] |
| 205 |
file mkdir $installed_path |
| 206 |
file copy $testsuite_dir/msp430-devices.h $testsuite_dir/devices.csv $installed_path |
| 207 |
} |
| 208 |
|
| 209 |
# Load support procs. |
| 210 |
load_lib gcc-dg.exp |
| 211 |
|
| 212 |
# The '-pedantic-errors' option in the global variable DEFAULT_CFLAGS that is |
| 213 |
# set by other drivers causes an error when the __int20 type is used, so remove |
| 214 |
# this option from DEFAULT_CFLAGS for the msp430 tests. |
| 215 |
global DEFAULT_CFLAGS |
| 216 |
if [info exists DEFAULT_CFLAGS] then { |
| 217 |
set MSP430_DEFAULT_CFLAGS \ |
| 218 |
[ string map { "-pedantic-errors" "" } $DEFAULT_CFLAGS ] |
| 219 |
} else { |
| 220 |
set MSP430_DEFAULT_CFLAGS "" |
| 221 |
} |
| 222 |
|
| 223 |
# Initialize `dg'. |
| 224 |
dg-init |
| 225 |
|
| 226 |
# Install then hide the devices data now, in case it is already installed. We |
| 227 |
# don't want it to interfere with tests until we need it to. |
| 228 |
msp430_install_device_data $srcdir/$subdir/devices |
| 229 |
msp430_hide_installed_devices_data |
| 230 |
|
| 231 |
# Main loop. |
| 232 |
dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/*.\[cCS\]]] \ |
| 233 |
"" $MSP430_DEFAULT_CFLAGS |
| 234 |
|
| 235 |
msp430_device_permutations_runtest [lsort [glob -nocomplain $srcdir/$subdir/devices/*.\[cCS\]]] |
| 236 |
|
| 237 |
msp430_restore_installed_devices_data |
| 238 |
|
| 239 |
# All done. |
| 240 |
dg-finish |