Debian Codegraph @

gcc/testsuite/gcc.target/msp430/isr-push-pop-main.c

raw
1 /* { dg-do run } */
2
3 #ifdef __MSP430X__
4 #include "isr-push-pop-isr-430x.c"
5 #include "isr-push-pop-leaf-isr-430x.c"
6 #else
7 #include "isr-push-pop-isr-430.c"
8 #include "isr-push-pop-leaf-isr-430.c"
9 #endif
10
11 /* Test that ISRs which call other functions do not save extraneous registers.
12 They only need to save the caller-saved regs R11->R15.
13 We use a lot of asm statements to hide what is going on from the compiler to
14 more accurately simulate an interrupt. */
15
16 /* Store the register number in each general register R4->R15, so they can be
17 later checked their value has been kept. */
18 #define SETUP_REGS \
19 __asm__ ("mov #4, r4"); \
20 __asm__ ("mov #5, r5"); \
21 __asm__ ("mov #6, r6"); \
22 __asm__ ("mov #7, r7"); \
23 __asm__ ("mov #8, r8"); \
24 __asm__ ("mov #9, r9"); \
25 __asm__ ("mov #10, r10"); \
26 __asm__ ("mov #11, r11"); \
27 __asm__ ("mov #12, r12"); \
28 __asm__ ("mov #13, r13"); \
29 __asm__ ("mov #14, r14"); \
30 __asm__ ("mov #15, r15");
31
32 /* Write an arbitrary value to all general regs. */
33 #define TRASH_REGS \
34 __asm__ ("mov #0xFFFF, r4" : : : "R4"); \
35 __asm__ ("mov #0xFFFF, r5" : : : "R5"); \
36 __asm__ ("mov #0xFFFF, r6" : : : "R6"); \
37 __asm__ ("mov #0xFFFF, r7" : : : "R7"); \
38 __asm__ ("mov #0xFFFF, r8" : : : "R8"); \
39 __asm__ ("mov #0xFFFF, r9" : : : "R9"); \
40 __asm__ ("mov #0xFFFF, r10" : : : "R10"); \
41 __asm__ ("mov #0xFFFF, r11" : : : "R11"); \
42 __asm__ ("mov #0xFFFF, r12" : : : "R12"); \
43 __asm__ ("mov #0xFFFF, r13" : : : "R13"); \
44 __asm__ ("mov #0xFFFF, r14" : : : "R14"); \
45 __asm__ ("mov #0xFFFF, r15" : : : "R15");
46
47 /* Check the value in all general registers is the same as that set in
48 SETUP_REGS. */
49 #define CHECK_REGS \
50 __asm__ ("cmp #4, r4 { jne ABORT"); \
51 __asm__ ("cmp #5, r5 { jne ABORT"); \
52 __asm__ ("cmp #6, r6 { jne ABORT"); \
53 __asm__ ("cmp #7, r7 { jne ABORT"); \
54 __asm__ ("cmp #8, r8 { jne ABORT"); \
55 __asm__ ("cmp #9, r9 { jne ABORT"); \
56 __asm__ ("cmp #10, r10 { jne ABORT"); \
57 __asm__ ("cmp #11, r11 { jne ABORT"); \
58 __asm__ ("cmp #12, r12 { jne ABORT"); \
59 __asm__ ("cmp #13, r13 { jne ABORT"); \
60 __asm__ ("cmp #14, r14 { jne ABORT"); \
61 __asm__ ("cmp #15, r15 { jne ABORT");
62
63 void __attribute__((noinline))
64 callee (void)
65 {
66 /* Here were modify all the regs, but tell the compiler that we are since
67 this is just a way to simulate a function that happens to modify all the
68 registers. */
69 TRASH_REGS
70 }
71 int
72 #ifdef __MSP430X_LARGE__
73 __attribute__((lower))
74 #endif
75 main (void)
76 {
77 SETUP_REGS
78
79 /* A surprise branch to the ISR that the compiler cannot prepare for.
80 We must first simulate the interrupt acceptance procedure that the
81 hardware would normally take care of.
82 So push the desired PC return address, and then the SR (R2).
83 MSP430X expects the high bits 19:16 of the PC return address to be stored
84 in bits 12:15 of the SR stack slot. This is hard to handle in hand-rolled
85 assembly code, so we always place main() in lower memory so the return
86 address is 16-bits. */
87 __asm__ ("push #CHECK1");
88 __asm__ ("push r2");
89 __asm__ ("br #isr");
90
91 __asm__ ("CHECK1:");
92 /* If any of the regs R4->R15 don't match their original value, this will
93 jump to ABORT. */
94 CHECK_REGS
95
96 /* Now test that an interrupt function that is a leaf also works
97 correctly. */
98 __asm__ ("push #CHECK2");
99 __asm__ ("push r2");
100 __asm__ ("br #isr_leaf");
101
102 __asm__ ("CHECK2:");
103 CHECK_REGS
104
105 /* The values in R4->R15 were successfully checked, now jump to FINISH to run
106 the prologue generated by the compiler. */
107 __asm__ ("jmp FINISH");
108
109 /* CHECK_REGS will branch here if a register holds the wrong value. */
110 __asm__ ("ABORT:");
111 #ifdef __MSP430X_LARGE__
112 __asm__ ("calla #abort");
113 #else
114 __asm__ ("call #abort");
115 #endif
116
117 __asm__ ("FINISH:");
118 return 0;
119 }
120