Debian Codegraph @

microhope/microhope-doc/prog/pmdk_adc.c

raw
1 /* adc.c -- routines for handling the Analog to Digital converter
2
3 Copyright (C) 2008 Ajith Kumar, Inter-University Accelerator Centre,
4 New Delhi.
5
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 3, or (at your option)
9 any later version.
10 */
11
12 #include <avr/io.h>
13
14 #ifndef BV
15 #define BV(bit) (1 << (bit))
16 #endif
17
18 #define REF_EXT 0 // Feed reference voltage externally
19 #define REF_INT (3<<6) // use the 2.56 V internal reference
20 #define REF_AVCC (1<<6) // Connect AVCC internally to reference
21 #define ADMAX 7 // channels 0 to 7
22 #define ADC_SPEED 7 // ADCClk = (8 MHz/ 128) = 62.5 KHz =>208 usec
23
24
25 uint8_t adc_active = 0;
26 uint8_t adc_ref = REF_AVCC; // Default is to use AVCC
27
28 void adc_enable(void)
29 {
30 ADCSRA = BV(ADEN); // Enable the ADC
31 ADMUX = REF_AVCC; // Use AVCC as reference
32 adc_active = 1;
33 }
34
35 void adc_disable(void)
36 {
37 ADCSRA = 0; // Disable the ADC
38 adc_active = 0;
39 }
40
41
42 void adc_set_ref(uint8_t val)
43 {
44 ADMUX &= 0x3f; // Clear reference selection bits
45 ADMUX |= val; // Set the selected reference source
46 }
47
48 uint16_t read_adc(uint8_t ch) // Returns 10 bit number
49 {
50 uint8_t low;
51 uint16_t val;
52
53 if (!adc_active)
54 adc_enable();
55 if (ch > ADMAX)
56 return 0;
57 ADMUX = adc_ref | ch; // Set channel & reference
58 ADCSRA = BV(ADEN) | BV(ADSC) | ADC_SPEED;
59 while ( !(ADCSRA & (1<<ADIF)) ) ; // wait for ADC conversion
60 ADCSRA |= ADIF;
61 low = ADCL;
62 val = ADCH;
63 return (val << 8) | low;
64 }
65