/* adc.c -- routines for handling the Analog to Digital converter Copyright (C) 2008 Ajith Kumar, Inter-University Accelerator Centre, New Delhi. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. */ #include #ifndef BV #define BV(bit) (1 << (bit)) #endif #define REF_EXT 0 // Feed reference voltage externally #define REF_INT (3<<6) // use the 2.56 V internal reference #define REF_AVCC (1<<6) // Connect AVCC internally to reference #define ADMAX 7 // channels 0 to 7 #define ADC_SPEED 7 // ADCClk = (8 MHz/ 128) = 62.5 KHz =>208 usec uint8_t adc_active = 0; uint8_t adc_ref = REF_AVCC; // Default is to use AVCC void adc_enable(void) { ADCSRA = BV(ADEN); // Enable the ADC ADMUX = REF_AVCC; // Use AVCC as reference adc_active = 1; } void adc_disable(void) { ADCSRA = 0; // Disable the ADC adc_active = 0; } void adc_set_ref(uint8_t val) { ADMUX &= 0x3f; // Clear reference selection bits ADMUX |= val; // Set the selected reference source } uint16_t read_adc(uint8_t ch) // Returns 10 bit number { uint8_t low; uint16_t val; if (!adc_active) adc_enable(); if (ch > ADMAX) return 0; ADMUX = adc_ref | ch; // Set channel & reference ADCSRA = BV(ADEN) | BV(ADSC) | ADC_SPEED; while ( !(ADCSRA & (1<