Debian Codegraph @

test/TAMIP/TAMIP_3hrMlev

raw
1 table_id: Table 3hrMlev ! Variables on model levels
2 modeling_realm: atmos
3
4 frequency: 3hr
5
6 cmor_version: 2.0 ! version of CMOR that can read this table
7 cf_version: 1.4 ! version of CF that output conforms to
8 project_id: TAMIP ! project id
9 table_date: 28 October 2010 ! date this table was constructed
10
11 missing_value: 1.e20 ! value used to indicate a missing value
12 ! in arrays output by netCDF as 32-bit IEEE
13 ! floating-point numbers (float or real)
14
15 baseURL: http://cmip-pcmdi.llnl.gov/CMIP5/dataLocation
16 product: output
17
18 required_global_attributes: creation_date tracking_id model_id ! space separated required global attribute
19
20 expt_id_ok: '5 day hindcast for tamip hindcast group 200810' 'tamip200810'
21 expt_id_ok: '5 day hindcast for tamip hindcast group 200901' 'tamip200901'
22 expt_id_ok: '5 day hindcast for tamip hindcast group 200904' 'tamip200904'
23 expt_id_ok: '5 day hindcast for tamip hindcast group 200907' 'tamip200907'
24
25
26 approx_interval: 0.125000 ! approximate spacing between successive time
27 ! samples (in units of the output time
28 ! coordinate.
29
30 generic_levels: alevel alevhalf
31
32 !============
33 axis_entry: longitude
34 !============
35 !----------------------------------
36 ! Axis attributes:
37 !----------------------------------
38 standard_name: longitude
39 units: degrees_east
40 axis: X ! X, Y, Z, T (default: undeclared)
41 long_name: longitude
42 !----------------------------------
43 ! Additional axis information:
44 !----------------------------------
45 out_name: lon
46 valid_min: 0.0
47 valid_max: 360.0
48 stored_direction: increasing
49 type: double
50 must_have_bounds: yes
51 !----------------------------------
52 !
53
54
55 !============
56 axis_entry: latitude
57 !============
58 !----------------------------------
59 ! Axis attributes:
60 !----------------------------------
61 standard_name: latitude
62 units: degrees_north
63 axis: Y ! X, Y, Z, T (default: undeclared)
64 long_name: latitude
65 !----------------------------------
66 ! Additional axis information:
67 !----------------------------------
68 out_name: lat
69 valid_min: -90.0
70 valid_max: 90.0
71 stored_direction: increasing
72 type: double
73 must_have_bounds: yes
74 !----------------------------------
75 !
76
77
78 !============
79 axis_entry: time
80 !============
81 !----------------------------------
82 ! Axis attributes:
83 !----------------------------------
84 standard_name: time
85 units: days since ?
86 axis: T ! X, Y, Z, T (default: undeclared)
87 long_name: time
88 !----------------------------------
89 ! Additional axis information:
90 !----------------------------------
91 out_name: time
92 stored_direction: increasing
93 type: double
94 must_have_bounds: yes
95 !----------------------------------
96 !
97
98
99 !============
100 axis_entry: smooth_level
101 !============
102 !
103 ! This coordinate is a hybrid height coordinate with units of meters (m).
104 ! It increases upward.
105 ! The values of a(k)*ztop, which appear in the formula below, should be stored as smooth_level.
106 ! Note that in the netCDF file the variable will be named "lev", not smooth_level.
107 !
108 !------------
109 !
110 ! Axis attributes:
111 !----------------------------------
112 standard_name: atmosphere_sleve_coordinate
113 units: m
114 axis: Z
115 positive: up
116 long_name: atmosphere smooth level vertical (SLEVE) coordinate
117 !----------------------------------
118 !
119 ! Additional axis information:
120 !----------------------------------
121 out_name: lev
122 must_have_bounds: yes
123 stored_direction: increasing
124 valid_min: -200.
125 valid_max: 800000.
126 formula: z(n,k,j,i) = a(k)*ztop + b1(k)*zsurf1(n,j,i) + b2(k)*zsurf2(n,j,i)
127 z_factors: a: a b1: b1 b2: b2 ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
128 z_bounds_factors: a: a_bnds b1: b1_bnds b2: b2_bnds ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
129 !----------------------------------
130 !
131 !============
132 axis_entry: natural_log_pressure
133 !============
134 !
135 !This coordinate is dimensionless and varies from near 0 at the surface and increases upward.
136 ! The values of lev(k), which appears in the formula below, should be stored as natural_log_pressure.
137 ! Note that in the netCDF file the variable will be named "lev", not natural_log_pressure.
138 !
139 !------------
140 !
141 ! Axis attributes:
142 !----------------------------------
143 standard_name: atmosphere_ln_pressure_coordinate
144 axis: Z
145 long_name: atmosphere natural log pressure coordinate
146 positive: down
147 !----------------------------------
148 !
149 ! Additional axis information:
150 !----------------------------------
151 out_name: lev
152 must_have_bounds: yes
153 stored_direction: decreasing
154 valid_min: -1.
155 valid_max: 20.
156 formula: p(k) = p0 * exp(-lev(k))
157 z_factors: p0: p0 lev: lev
158 z_bounds_factors: p0: p0 lev: lev_bnds
159 !----------------------------------
160 !
161 !============
162 axis_entry: standard_sigma
163 !============
164 !
165 ! This coordinate is dimensionless and varies from 0 at the model top to 1.0 at the surface.
166 ! The values of sigma(k), which appears in the formula below, should be stored as standard_sigma.
167 ! Note that in the netCDF file the variable will be named "lev", not standard_sigma.
168 !
169 !------------
170 !
171 ! Axis attributes:
172 !----------------------------------
173 standard_name: atmosphere_sigma_coordinate
174 axis: Z
175 positive: down
176 long_name: sigma coordinate
177 !----------------------------------
178 !
179 ! Additional axis information:
180 !----------------------------------
181 out_name: lev
182 must_have_bounds: yes
183 stored_direction: decreasing
184 valid_min: 0.0
185 valid_max: 1.0
186 formula: p(n,k,j,i) = ptop + sigma(k)*(ps(n,j,i) - ptop)
187 z_factors: ptop: ptop sigma: lev ps: ps
188 z_bounds_factors: ptop: ptop sigma: lev_bnds ps: ps
189 !----------------------------------
190 !
191 !
192 !============
193 axis_entry: standard_hybrid_sigma
194 !============
195 !
196 ! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
197 ! The values of a(k)+ b(k), which appear in the formula below, should be stored as standard_hybrid_sigma.
198 ! Note that in the netCDF file the variable will be named "lev", not standard_hybrid_sigma.
199 !
200 !---------------------------------
201 ! Axis attributes:
202 !----------------------------------
203 standard_name: atmosphere_hybrid_sigma_pressure_coordinate
204 units: 1
205 axis: Z
206 positive: down
207 long_name: hybrid sigma pressure coordinate
208 !----------------------------------
209 ! Additional axis information:
210 !----------------------------------
211 out_name: lev
212 must_have_bounds: yes
213 stored_direction: decreasing
214 valid_min: 0.0
215 valid_max: 1.0
216 formula: p(n,k,j,i) = a(k)*p0 + b(k)*ps(n,j,i)
217 z_factors: p0: p0 a: a b: b ps: ps
218 z_bounds_factors: p0: p0 a: a_bnds b: b_bnds ps: ps
219 !----------------------------------
220 !
221 !
222 !============
223 axis_entry: alternate_hybrid_sigma
224 !============
225 !
226 ! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
227 ! The values of ap(k)/p0 + b(k), which appear in the formula below, should be stored as alternate_hybrid_sigma.
228 ! Note that in the netCDF file the variable will be named "lev", not alternate_hybrid_sigma.
229 !
230 !------------
231 !
232 ! Axis attributes:
233 !----------------------------------
234 standard_name: atmosphere_hybrid_sigma_pressure_coordinate
235 units: 1
236 axis: Z
237 positive: down
238 long_name: hybrid sigma pressure coordinate
239 !----------------------------------
240 !
241 ! Additional axis information:
242 !----------------------------------
243 out_name: lev
244 must_have_bounds: yes
245 stored_direction: decreasing
246 valid_min: 0.0
247 valid_max: 1.0
248 formula: p(n,k,j,i) = ap(k) + b(k)*ps(n,j,i)
249 z_factors: ap: ap b: b ps: ps
250 z_bounds_factors: ap: ap_bnds b: b_bnds ps: ps
251 !----------------------------------
252 !
253 !
254 !============
255 axis_entry: hybrid_height
256 !============
257 !
258 ! This coordinate has dimension of meters (m) and increases upward.
259 ! The values of a(k) which appear in the formula below, should be stored as hybrid_height.
260 ! Note that in the netCDF file the variable will be named "lev", not hybrid_height.
261 !
262 !------------
263 !
264 ! Axis attributes:
265 !----------------------------------
266 standard_name: atmosphere_hybrid_height_coordinate
267 units: m
268 axis: Z
269 positive: up
270 long_name: hybrid height coordinate
271 !----------------------------------
272 !
273 ! Additional axis information:
274 !----------------------------------
275 out_name: lev
276 must_have_bounds: yes
277 stored_direction: increasing
278 valid_min: 0.0
279 formula: z(k,j,i) = a(k) + b(k)*orog(j,i)
280 z_factors: a: lev b: b orog: orog
281 z_bounds_factors: a: lev_bnds b: b_bnds orog: orog
282 !----------------------------------
283 !
284 ! ***************************************************************
285 !
286 ! Vertical coordinate formula terms:
287 !
288 ! ***************************************************************
289 !
290 !
291 !============
292 variable_entry: orog
293 !============
294 modeling_realm: atmos
295 !----------------------------------
296 ! Variable attributes:
297 !----------------------------------
298 standard_name: surface_altitude
299 units: m
300 long_name: Surface Altitude
301 comment: height above the geoid; as defined here, ""the geoid"" is a surface of constant geopotential that, if the ocean were at rest, would coincide with mean sea level. Under this definition, the geoid changes as the mean volume of the ocean changes (e.g., due to glacial melt, or global warming of the ocean). Report here the height above the present-day geoid. Over ocean, report as 0.0
302 !----------------------------------
303 ! Additional variable information:
304 !----------------------------------
305 dimensions: longitude latitude
306 out_name: orog
307 type: real
308 valid_min: -700
309 valid_max: 1.00E+04
310 !----------------------------------
311 !
312 !
313 !============
314 variable_entry: p0
315 !============
316 !------------
317 !
318 ! Variable attributes:
319 !----------------------------------
320 long_name: vertical coordinate formula term: reference pressure
321 units: Pa
322 !----------------------------------
323 !
324 !
325 !============
326 variable_entry: ptop
327 !============
328 !
329 !------------
330 !
331 ! Variable attributes:
332 !----------------------------------
333 long_name: pressure at top of model
334 units: Pa
335 !----------------------------------
336 !
337 !
338 !
339 !============
340 variable_entry: a
341 !============
342 !------------
343 !
344 ! Variable attributes:
345 !----------------------------------
346 long_name: vertical coordinate formula term: a(k)
347 !----------------------------------
348 !
349 ! Additional variable information:
350 !----------------------------------
351 dimensions: alevel
352 type: double
353 !----------------------------------
354 !
355 !
356 !============
357 variable_entry: b
358 !============
359 !------------
360 !
361 ! Variable attributes:
362 !----------------------------------
363 long_name: vertical coordinate formula term: b(k)
364 !----------------------------------
365 !
366 ! Additional variable information:
367 !----------------------------------
368 dimensions: alevel
369 type: double
370 !----------------------------------
371 !
372 !
373 !============
374 variable_entry: a_bnds
375 !============
376 !
377 !------------
378 !
379 ! Variable attributes:
380 !----------------------------------
381 long_name: vertical coordinate formula term: a(k+1/2)
382 !----------------------------------
383 !
384 ! Additional variable information:
385 !----------------------------------
386 dimensions: alevel
387 type: double
388 !----------------------------------
389 !
390 !
391 !============
392 variable_entry: b_bnds
393 !============
394 !
395 !------------
396 !
397 ! Variable attributes:
398 !----------------------------------
399 long_name: vertical coordinate formula term: b(k+1/2)
400 !----------------------------------
401 !
402 ! Additional variable information:
403 !----------------------------------
404 dimensions: alevel
405 type: double
406 !----------------------------------
407 !
408 !
409 !============
410 variable_entry: ap
411 !============
412 !
413 ! Variable attributes:
414 !----------------------------------
415 long_name: vertical coordinate formula term: ap(k)
416 units: Pa
417 !----------------------------------
418 !
419 ! Additional variable information:
420 !----------------------------------
421 dimensions: alevel
422 type: double
423 !----------------------------------
424 !
425 !
426 !============
427 variable_entry: ap_bnds
428 !============
429 !
430 ! Variable attributes:
431 !----------------------------------
432 long_name: vertical coordinate formula term: ap(k+1/2)
433 units: Pa
434 !----------------------------------
435 !
436 ! Additional variable information:
437 !----------------------------------
438 dimensions: alevel
439 type: double
440 !----------------------------------
441 !
442 !
443 !============
444 variable_entry: ztop
445 !============
446 !
447 !------------
448 !
449 ! Variable attributes:
450 !----------------------------------
451 long_name: height of top of model
452 units: m
453 !----------------------------------
454 !
455 !
456 !
457 !
458
459 !============
460 variable_entry: ua
461 !============
462 modeling_realm: atmos
463 !----------------------------------
464 ! Variable attributes:
465 !----------------------------------
466 standard_name: eastward_wind
467 units: m s-1
468 cell_methods: time: mean
469 long_name: Eastward Wind
470 !----------------------------------
471 ! Additional variable information:
472 !----------------------------------
473 dimensions: longitude latitude alevel time
474 out_name: ua
475 type: real
476 !----------------------------------
477 !
478
479 !============
480 variable_entry: va
481 !============
482 modeling_realm: atmos
483 !----------------------------------
484 ! Variable attributes:
485 !----------------------------------
486 standard_name: northward_wind
487 units: m s-1
488 cell_methods: time: mean
489 long_name: Northward Wind
490 !----------------------------------
491 ! Additional variable information:
492 !----------------------------------
493 dimensions: longitude latitude alevel time
494 out_name: va
495 type: real
496 !----------------------------------
497 !
498
499 !============
500 variable_entry: ta
501 !============
502 modeling_realm: atmos
503 !----------------------------------
504 ! Variable attributes:
505 !----------------------------------
506 standard_name: air_temperature
507 units: K
508 cell_methods: time: mean
509 long_name: Air Temperature
510 !----------------------------------
511 ! Additional variable information:
512 !----------------------------------
513 dimensions: longitude latitude alevel time
514 out_name: ta
515 type: real
516 !----------------------------------
517 !
518
519 !============
520 variable_entry: hus
521 !============
522 modeling_realm: atmos
523 !----------------------------------
524 ! Variable attributes:
525 !----------------------------------
526 standard_name: specific_humidity
527 units: 1
528 cell_methods: time: mean
529 long_name: Specific Humidity
530 !----------------------------------
531 ! Additional variable information:
532 !----------------------------------
533 dimensions: longitude latitude alevel time
534 out_name: hus
535 type: real
536 !----------------------------------
537 !
538
539 !============
540 variable_entry: wap
541 !============
542 modeling_realm: atmos
543 !----------------------------------
544 ! Variable attributes:
545 !----------------------------------
546 standard_name: lagrangian_tendency_of_air_pressure
547 units: Pa s-1
548 cell_methods: time: mean
549 long_name: omega (=dp/dt)
550 comment: commonly referred to as ""omega"", this represents the vertical component of velocity in pressure coordinates (positive down)
551 !----------------------------------
552 ! Additional variable information:
553 !----------------------------------
554 dimensions: longitude latitude alevel time
555 out_name: wap
556 type: real
557 !----------------------------------
558 !
559
560 !============
561 variable_entry: zg
562 !============
563 modeling_realm: atmos
564 !----------------------------------
565 ! Variable attributes:
566 !----------------------------------
567 standard_name: geopotential_height
568 units: m
569 cell_methods: time: mean
570 long_name: Geopotential Height
571 !----------------------------------
572 ! Additional variable information:
573 !----------------------------------
574 dimensions: longitude latitude alevel time
575 out_name: zg
576 type: real
577 !----------------------------------
578 !
579
580 !============
581 variable_entry: hur
582 !============
583 modeling_realm: atmos
584 !----------------------------------
585 ! Variable attributes:
586 !----------------------------------
587 standard_name: relative_humidity
588 units: %
589 cell_methods: time: mean
590 long_name: Relative Humidity
591 comment: This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C.
592 !----------------------------------
593 ! Additional variable information:
594 !----------------------------------
595 dimensions: longitude latitude alevel time
596 out_name: hur
597 type: real
598 !----------------------------------
599 !
600
601 !============
602 variable_entry: cl
603 !============
604 modeling_realm: atmos
605 !----------------------------------
606 ! Variable attributes:
607 !----------------------------------
608 standard_name: cloud_area_fraction_in_atmosphere_layer
609 units: %
610 cell_methods: time: mean
611 long_name: Cloud Area Fraction in Atmosphere Layer
612 !----------------------------------
613 ! Additional variable information:
614 !----------------------------------
615 dimensions: longitude latitude alevel time
616 out_name: cl
617 type: real
618 !----------------------------------
619 !
620
621 !============
622 variable_entry: clw
623 !============
624 modeling_realm: atmos
625 !----------------------------------
626 ! Variable attributes:
627 !----------------------------------
628 standard_name: mass_fraction_of_cloud_liquid_water_in_air
629 units: 1
630 cell_methods: time: mean
631 long_name: Mass Fraction of Cloud Liquid Water
632 comment: Calculate as the mass of cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. Include precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model.
633 !----------------------------------
634 ! Additional variable information:
635 !----------------------------------
636 dimensions: longitude latitude alevel time
637 out_name: clw
638 type: real
639 !----------------------------------
640 !
641
642 !============
643 variable_entry: cli
644 !============
645 modeling_realm: atmos
646 !----------------------------------
647 ! Variable attributes:
648 !----------------------------------
649 standard_name: mass_fraction_of_cloud_ice_in_air
650 units: 1
651 cell_methods: time: mean
652 long_name: Mass Fraction of Cloud Ice
653 comment: Calculate as the mass of cloud ice in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. Include precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model.
654 !----------------------------------
655 ! Additional variable information:
656 !----------------------------------
657 dimensions: longitude latitude alevel time
658 out_name: cli
659 type: real
660 !----------------------------------
661 !
662
663 !============
664 variable_entry: mc
665 !============
666 modeling_realm: atmos
667 !----------------------------------
668 ! Variable attributes:
669 !----------------------------------
670 standard_name: atmosphere_convective_mass_flux
671 units: kg m-2 s-1
672 cell_methods: time: mean
673 long_name: Convective Mass Flux
674 comment: Report on model half-levels (i.e., model layer bounds and not standard pressures). Calculate as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud).
675 !----------------------------------
676 ! Additional variable information:
677 !----------------------------------
678 dimensions: longitude latitude alevhalf time
679 out_name: mc
680 type: real
681 !----------------------------------
682 !
683
684 !============
685 variable_entry: tnt
686 !============
687 modeling_realm: atmos
688 !----------------------------------
689 ! Variable attributes:
690 !----------------------------------
691 standard_name: tendency_of_air_temperature
692 units: K s-1
693 cell_methods: time: mean
694 long_name: Tendency of Air Temperature
695 !----------------------------------
696 ! Additional variable information:
697 !----------------------------------
698 dimensions: longitude latitude alevel time
699 out_name: tnt
700 type: real
701 !----------------------------------
702 !
703
704 !============
705 variable_entry: tnta
706 !============
707 modeling_realm: atmos
708 !----------------------------------
709 ! Variable attributes:
710 !----------------------------------
711 standard_name: tendency_of_air_temperature_due_to_advection
712 units: K s-1
713 cell_methods: time: mean
714 long_name: Tendency of Air Temperature due to Advection
715 !----------------------------------
716 ! Additional variable information:
717 !----------------------------------
718 dimensions: longitude latitude alevel time
719 out_name: tnta
720 type: real
721 !----------------------------------
722 !
723
724 !============
725 variable_entry: tntmp
726 !============
727 modeling_realm: atmos
728 !----------------------------------
729 ! Variable attributes:
730 !----------------------------------
731 standard_name: tendency_of_air_temperature_due_to_model_physics
732 units: K s-1
733 cell_methods: time: mean
734 long_name: Tendency of Air Temperature due to Diabatic Processes
735 !----------------------------------
736 ! Additional variable information:
737 !----------------------------------
738 dimensions: longitude latitude alevel time
739 out_name: tntmp
740 type: real
741 !----------------------------------
742 !
743
744 !============
745 variable_entry: tntscpbl
746 !============
747 modeling_realm: atmos
748 !----------------------------------
749 ! Variable attributes:
750 !----------------------------------
751 standard_name: tendency_of_air_temperature_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing
752 units: K s-1
753 cell_methods: time: mean
754 long_name: Tendency of Air Temperature Due to Stratiform Cloud and Precipitation and Boundary Layer Mixing
755 !----------------------------------
756 ! Additional variable information:
757 !----------------------------------
758 dimensions: longitude latitude alevel time
759 out_name: tntscpbl
760 type: real
761 !----------------------------------
762 !
763
764 !============
765 variable_entry: tntr
766 !============
767 modeling_realm: atmos
768 !----------------------------------
769 ! Variable attributes:
770 !----------------------------------
771 standard_name: tendency_of_air_temperature_due_to_radiative_heating
772 units: K s-1
773 cell_methods: time: mean
774 long_name: Tendency of Air Temperature due to Radiative Heating
775 !----------------------------------
776 ! Additional variable information:
777 !----------------------------------
778 dimensions: longitude latitude alevel time
779 out_name: tntr
780 type: real
781 !----------------------------------
782 !
783
784 !============
785 variable_entry: tntc
786 !============
787 modeling_realm: atmos
788 !----------------------------------
789 ! Variable attributes:
790 !----------------------------------
791 standard_name: tendency_of_air_temperature_due_to_convection
792 units: K s-1
793 cell_methods: time: mean
794 long_name: Tendency of Air Temperature due to Moist Convection
795 !----------------------------------
796 ! Additional variable information:
797 !----------------------------------
798 dimensions: longitude latitude alevel time
799 out_name: tntc
800 type: real
801 !----------------------------------
802 !
803
804 !============
805 variable_entry: tnhus
806 !============
807 modeling_realm: atmos
808 !----------------------------------
809 ! Variable attributes:
810 !----------------------------------
811 standard_name: tendency_of_specific_humidity
812 units: s-1
813 cell_methods: time: mean
814 long_name: Tendency of Specific Humidity
815 !----------------------------------
816 ! Additional variable information:
817 !----------------------------------
818 dimensions: longitude latitude alevel time
819 out_name: tnhus
820 type: real
821 !----------------------------------
822 !
823
824 !============
825 variable_entry: tnhusa
826 !============
827 modeling_realm: atmos
828 !----------------------------------
829 ! Variable attributes:
830 !----------------------------------
831 standard_name: tendency_of_specific_humidity_due_to_advection
832 units: s-1
833 cell_methods: time: mean
834 long_name: Tendency of Specific Humidity due to Advection
835 !----------------------------------
836 ! Additional variable information:
837 !----------------------------------
838 dimensions: longitude latitude alevel time
839 out_name: tnhusa
840 type: real
841 !----------------------------------
842 !
843
844 !============
845 variable_entry: tnhusc
846 !============
847 modeling_realm: atmos
848 !----------------------------------
849 ! Variable attributes:
850 !----------------------------------
851 standard_name: tendency_of_specific_humidity_due_to_convection
852 units: s-1
853 cell_methods: time: mean
854 long_name: Tendency of Specific Humidity due to Convection
855 !----------------------------------
856 ! Additional variable information:
857 !----------------------------------
858 dimensions: longitude latitude alevel time
859 out_name: tnhusc
860 type: real
861 !----------------------------------
862 !
863
864 !============
865 variable_entry: tnhusd
866 !============
867 modeling_realm: atmos
868 !----------------------------------
869 ! Variable attributes:
870 !----------------------------------
871 standard_name: tendency_of_specific_humidity_due_to_diffusion
872 units: s-1
873 cell_methods: time: mean
874 long_name: Tendency of Specific Humidity due to Diffusion
875 !----------------------------------
876 ! Additional variable information:
877 !----------------------------------
878 dimensions: longitude latitude alevel time
879 out_name: tnhusd
880 type: real
881 !----------------------------------
882 !
883
884 !============
885 variable_entry: tnhusscpbl
886 !============
887 modeling_realm: atmos
888 !----------------------------------
889 ! Variable attributes:
890 !----------------------------------
891 standard_name: tendency_of_specific_humidity_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing
892 units: s-1
893 cell_methods: time: mean
894 long_name: Tendency of Specific Humidity due to Stratiform Cloud Condensation and Evaporation
895 !----------------------------------
896 ! Additional variable information:
897 !----------------------------------
898 dimensions: longitude latitude alevel time
899 out_name: tnhusscpbl
900 type: real
901 !----------------------------------
902 !
903
904 !============
905 variable_entry: tnhusmp
906 !============
907 modeling_realm: atmos
908 !----------------------------------
909 ! Variable attributes:
910 !----------------------------------
911 standard_name: tendency_of_specific_humidity_due_to_model_physics
912 units: s-1
913 cell_methods: time: mean
914 long_name: Tendency of Specific Humidity due to Model Physics
915 comment: This should include sources and sinks from parametrized physics (e.g. convection, stratiform condensation/evaporation, etc.) and should exclude sources and sinks from resolved dynamics and diffusion.
916 !----------------------------------
917 ! Additional variable information:
918 !----------------------------------
919 dimensions: longitude latitude alevel time
920 out_name: tnhusmp
921 type: real
922 !----------------------------------
923 !
924
925 !============
926 variable_entry: pfull
927 !============
928 modeling_realm: atmos
929 !----------------------------------
930 ! Variable attributes:
931 !----------------------------------
932 standard_name: air_pressure
933 units: Pa
934 cell_methods: time: mean
935 long_name: Pressure on Model Levels
936 comment: This field is needed only for models in which the pressure can't be calculated from the vertical coordinate information stored already for each variable. Thus, the pressures are needed for height or theta-coordinate models, for example, but not sigma- or eta-coordinate models.
937 !----------------------------------
938 ! Additional variable information:
939 !----------------------------------
940 dimensions: longitude latitude alevel time
941 out_name: pfull
942 type: real
943 !----------------------------------
944 !
945
946 !============
947 variable_entry: phalf
948 !============
949 modeling_realm: atmos
950 !----------------------------------
951 ! Variable attributes:
952 !----------------------------------
953 standard_name: air_pressure
954 units: Pa
955 cell_methods: time: mean
956 long_name: Pressure on Model Half-Levels
957 comment: This field is needed only for models in which the pressure can't be calculated from the vertical coordinate information stored already for each variable. Thus, the pressures are needed for height or theta-coordinate models, for example, but not sigma- or eta-coordinate models.
958 !----------------------------------
959 ! Additional variable information:
960 !----------------------------------
961 dimensions: longitude latitude alevhalf time
962 out_name: phalf
963 type: real
964 !----------------------------------
965 !
966