table_id: Table 3hrMlev ! Variables on model levels modeling_realm: atmos frequency: 3hr cmor_version: 2.0 ! version of CMOR that can read this table cf_version: 1.4 ! version of CF that output conforms to project_id: TAMIP ! project id table_date: 28 October 2010 ! date this table was constructed missing_value: 1.e20 ! value used to indicate a missing value ! in arrays output by netCDF as 32-bit IEEE ! floating-point numbers (float or real) baseURL: http://cmip-pcmdi.llnl.gov/CMIP5/dataLocation product: output required_global_attributes: creation_date tracking_id model_id ! space separated required global attribute expt_id_ok: '5 day hindcast for tamip hindcast group 200810' 'tamip200810' expt_id_ok: '5 day hindcast for tamip hindcast group 200901' 'tamip200901' expt_id_ok: '5 day hindcast for tamip hindcast group 200904' 'tamip200904' expt_id_ok: '5 day hindcast for tamip hindcast group 200907' 'tamip200907' approx_interval: 0.125000 ! approximate spacing between successive time ! samples (in units of the output time ! coordinate. generic_levels: alevel alevhalf !============ axis_entry: longitude !============ !---------------------------------- ! Axis attributes: !---------------------------------- standard_name: longitude units: degrees_east axis: X ! X, Y, Z, T (default: undeclared) long_name: longitude !---------------------------------- ! Additional axis information: !---------------------------------- out_name: lon valid_min: 0.0 valid_max: 360.0 stored_direction: increasing type: double must_have_bounds: yes !---------------------------------- ! !============ axis_entry: latitude !============ !---------------------------------- ! Axis attributes: !---------------------------------- standard_name: latitude units: degrees_north axis: Y ! X, Y, Z, T (default: undeclared) long_name: latitude !---------------------------------- ! Additional axis information: !---------------------------------- out_name: lat valid_min: -90.0 valid_max: 90.0 stored_direction: increasing type: double must_have_bounds: yes !---------------------------------- ! !============ axis_entry: time !============ !---------------------------------- ! Axis attributes: !---------------------------------- standard_name: time units: days since ? axis: T ! X, Y, Z, T (default: undeclared) long_name: time !---------------------------------- ! Additional axis information: !---------------------------------- out_name: time stored_direction: increasing type: double must_have_bounds: yes !---------------------------------- ! !============ axis_entry: smooth_level !============ ! ! This coordinate is a hybrid height coordinate with units of meters (m). ! It increases upward. ! The values of a(k)*ztop, which appear in the formula below, should be stored as smooth_level. ! Note that in the netCDF file the variable will be named "lev", not smooth_level. ! !------------ ! ! Axis attributes: !---------------------------------- standard_name: atmosphere_sleve_coordinate units: m axis: Z positive: up long_name: atmosphere smooth level vertical (SLEVE) coordinate !---------------------------------- ! ! Additional axis information: !---------------------------------- out_name: lev must_have_bounds: yes stored_direction: increasing valid_min: -200. valid_max: 800000. formula: z(n,k,j,i) = a(k)*ztop + b1(k)*zsurf1(n,j,i) + b2(k)*zsurf2(n,j,i) z_factors: a: a b1: b1 b2: b2 ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2 z_bounds_factors: a: a_bnds b1: b1_bnds b2: b2_bnds ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2 !---------------------------------- ! !============ axis_entry: natural_log_pressure !============ ! !This coordinate is dimensionless and varies from near 0 at the surface and increases upward. ! The values of lev(k), which appears in the formula below, should be stored as natural_log_pressure. ! Note that in the netCDF file the variable will be named "lev", not natural_log_pressure. ! !------------ ! ! Axis attributes: !---------------------------------- standard_name: atmosphere_ln_pressure_coordinate axis: Z long_name: atmosphere natural log pressure coordinate positive: down !---------------------------------- ! ! Additional axis information: !---------------------------------- out_name: lev must_have_bounds: yes stored_direction: decreasing valid_min: -1. valid_max: 20. formula: p(k) = p0 * exp(-lev(k)) z_factors: p0: p0 lev: lev z_bounds_factors: p0: p0 lev: lev_bnds !---------------------------------- ! !============ axis_entry: standard_sigma !============ ! ! This coordinate is dimensionless and varies from 0 at the model top to 1.0 at the surface. ! The values of sigma(k), which appears in the formula below, should be stored as standard_sigma. ! Note that in the netCDF file the variable will be named "lev", not standard_sigma. ! !------------ ! ! Axis attributes: !---------------------------------- standard_name: atmosphere_sigma_coordinate axis: Z positive: down long_name: sigma coordinate !---------------------------------- ! ! Additional axis information: !---------------------------------- out_name: lev must_have_bounds: yes stored_direction: decreasing valid_min: 0.0 valid_max: 1.0 formula: p(n,k,j,i) = ptop + sigma(k)*(ps(n,j,i) - ptop) z_factors: ptop: ptop sigma: lev ps: ps z_bounds_factors: ptop: ptop sigma: lev_bnds ps: ps !---------------------------------- ! ! !============ axis_entry: standard_hybrid_sigma !============ ! ! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface. ! The values of a(k)+ b(k), which appear in the formula below, should be stored as standard_hybrid_sigma. ! Note that in the netCDF file the variable will be named "lev", not standard_hybrid_sigma. ! !--------------------------------- ! Axis attributes: !---------------------------------- standard_name: atmosphere_hybrid_sigma_pressure_coordinate units: 1 axis: Z positive: down long_name: hybrid sigma pressure coordinate !---------------------------------- ! Additional axis information: !---------------------------------- out_name: lev must_have_bounds: yes stored_direction: decreasing valid_min: 0.0 valid_max: 1.0 formula: p(n,k,j,i) = a(k)*p0 + b(k)*ps(n,j,i) z_factors: p0: p0 a: a b: b ps: ps z_bounds_factors: p0: p0 a: a_bnds b: b_bnds ps: ps !---------------------------------- ! ! !============ axis_entry: alternate_hybrid_sigma !============ ! ! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface. ! The values of ap(k)/p0 + b(k), which appear in the formula below, should be stored as alternate_hybrid_sigma. ! Note that in the netCDF file the variable will be named "lev", not alternate_hybrid_sigma. ! !------------ ! ! Axis attributes: !---------------------------------- standard_name: atmosphere_hybrid_sigma_pressure_coordinate units: 1 axis: Z positive: down long_name: hybrid sigma pressure coordinate !---------------------------------- ! ! Additional axis information: !---------------------------------- out_name: lev must_have_bounds: yes stored_direction: decreasing valid_min: 0.0 valid_max: 1.0 formula: p(n,k,j,i) = ap(k) + b(k)*ps(n,j,i) z_factors: ap: ap b: b ps: ps z_bounds_factors: ap: ap_bnds b: b_bnds ps: ps !---------------------------------- ! ! !============ axis_entry: hybrid_height !============ ! ! This coordinate has dimension of meters (m) and increases upward. ! The values of a(k) which appear in the formula below, should be stored as hybrid_height. ! Note that in the netCDF file the variable will be named "lev", not hybrid_height. ! !------------ ! ! Axis attributes: !---------------------------------- standard_name: atmosphere_hybrid_height_coordinate units: m axis: Z positive: up long_name: hybrid height coordinate !---------------------------------- ! ! Additional axis information: !---------------------------------- out_name: lev must_have_bounds: yes stored_direction: increasing valid_min: 0.0 formula: z(k,j,i) = a(k) + b(k)*orog(j,i) z_factors: a: lev b: b orog: orog z_bounds_factors: a: lev_bnds b: b_bnds orog: orog !---------------------------------- ! ! *************************************************************** ! ! Vertical coordinate formula terms: ! ! *************************************************************** ! ! !============ variable_entry: orog !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: surface_altitude units: m long_name: Surface Altitude comment: height above the geoid; as defined here, ""the geoid"" is a surface of constant geopotential that, if the ocean were at rest, would coincide with mean sea level. Under this definition, the geoid changes as the mean volume of the ocean changes (e.g., due to glacial melt, or global warming of the ocean). Report here the height above the present-day geoid. Over ocean, report as 0.0 !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude out_name: orog type: real valid_min: -700 valid_max: 1.00E+04 !---------------------------------- ! ! !============ variable_entry: p0 !============ !------------ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: reference pressure units: Pa !---------------------------------- ! ! !============ variable_entry: ptop !============ ! !------------ ! ! Variable attributes: !---------------------------------- long_name: pressure at top of model units: Pa !---------------------------------- ! ! ! !============ variable_entry: a !============ !------------ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: a(k) !---------------------------------- ! ! Additional variable information: !---------------------------------- dimensions: alevel type: double !---------------------------------- ! ! !============ variable_entry: b !============ !------------ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: b(k) !---------------------------------- ! ! Additional variable information: !---------------------------------- dimensions: alevel type: double !---------------------------------- ! ! !============ variable_entry: a_bnds !============ ! !------------ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: a(k+1/2) !---------------------------------- ! ! Additional variable information: !---------------------------------- dimensions: alevel type: double !---------------------------------- ! ! !============ variable_entry: b_bnds !============ ! !------------ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: b(k+1/2) !---------------------------------- ! ! Additional variable information: !---------------------------------- dimensions: alevel type: double !---------------------------------- ! ! !============ variable_entry: ap !============ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: ap(k) units: Pa !---------------------------------- ! ! Additional variable information: !---------------------------------- dimensions: alevel type: double !---------------------------------- ! ! !============ variable_entry: ap_bnds !============ ! ! Variable attributes: !---------------------------------- long_name: vertical coordinate formula term: ap(k+1/2) units: Pa !---------------------------------- ! ! Additional variable information: !---------------------------------- dimensions: alevel type: double !---------------------------------- ! ! !============ variable_entry: ztop !============ ! !------------ ! ! Variable attributes: !---------------------------------- long_name: height of top of model units: m !---------------------------------- ! ! ! ! !============ variable_entry: ua !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: eastward_wind units: m s-1 cell_methods: time: mean long_name: Eastward Wind !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: ua type: real !---------------------------------- ! !============ variable_entry: va !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: northward_wind units: m s-1 cell_methods: time: mean long_name: Northward Wind !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: va type: real !---------------------------------- ! !============ variable_entry: ta !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: air_temperature units: K cell_methods: time: mean long_name: Air Temperature !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: ta type: real !---------------------------------- ! !============ variable_entry: hus !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: specific_humidity units: 1 cell_methods: time: mean long_name: Specific Humidity !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: hus type: real !---------------------------------- ! !============ variable_entry: wap !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: lagrangian_tendency_of_air_pressure units: Pa s-1 cell_methods: time: mean long_name: omega (=dp/dt) comment: commonly referred to as ""omega"", this represents the vertical component of velocity in pressure coordinates (positive down) !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: wap type: real !---------------------------------- ! !============ variable_entry: zg !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: geopotential_height units: m cell_methods: time: mean long_name: Geopotential Height !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: zg type: real !---------------------------------- ! !============ variable_entry: hur !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: relative_humidity units: % cell_methods: time: mean long_name: Relative Humidity comment: This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: hur type: real !---------------------------------- ! !============ variable_entry: cl !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: cloud_area_fraction_in_atmosphere_layer units: % cell_methods: time: mean long_name: Cloud Area Fraction in Atmosphere Layer !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: cl type: real !---------------------------------- ! !============ variable_entry: clw !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: mass_fraction_of_cloud_liquid_water_in_air units: 1 cell_methods: time: mean long_name: Mass Fraction of Cloud Liquid Water comment: Calculate as the mass of cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. Include precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: clw type: real !---------------------------------- ! !============ variable_entry: cli !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: mass_fraction_of_cloud_ice_in_air units: 1 cell_methods: time: mean long_name: Mass Fraction of Cloud Ice comment: Calculate as the mass of cloud ice in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. Include precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: cli type: real !---------------------------------- ! !============ variable_entry: mc !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: atmosphere_convective_mass_flux units: kg m-2 s-1 cell_methods: time: mean long_name: Convective Mass Flux comment: Report on model half-levels (i.e., model layer bounds and not standard pressures). Calculate as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevhalf time out_name: mc type: real !---------------------------------- ! !============ variable_entry: tnt !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_air_temperature units: K s-1 cell_methods: time: mean long_name: Tendency of Air Temperature !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnt type: real !---------------------------------- ! !============ variable_entry: tnta !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_air_temperature_due_to_advection units: K s-1 cell_methods: time: mean long_name: Tendency of Air Temperature due to Advection !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnta type: real !---------------------------------- ! !============ variable_entry: tntmp !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_air_temperature_due_to_model_physics units: K s-1 cell_methods: time: mean long_name: Tendency of Air Temperature due to Diabatic Processes !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tntmp type: real !---------------------------------- ! !============ variable_entry: tntscpbl !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_air_temperature_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing units: K s-1 cell_methods: time: mean long_name: Tendency of Air Temperature Due to Stratiform Cloud and Precipitation and Boundary Layer Mixing !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tntscpbl type: real !---------------------------------- ! !============ variable_entry: tntr !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_air_temperature_due_to_radiative_heating units: K s-1 cell_methods: time: mean long_name: Tendency of Air Temperature due to Radiative Heating !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tntr type: real !---------------------------------- ! !============ variable_entry: tntc !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_air_temperature_due_to_convection units: K s-1 cell_methods: time: mean long_name: Tendency of Air Temperature due to Moist Convection !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tntc type: real !---------------------------------- ! !============ variable_entry: tnhus !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_specific_humidity units: s-1 cell_methods: time: mean long_name: Tendency of Specific Humidity !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnhus type: real !---------------------------------- ! !============ variable_entry: tnhusa !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_specific_humidity_due_to_advection units: s-1 cell_methods: time: mean long_name: Tendency of Specific Humidity due to Advection !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnhusa type: real !---------------------------------- ! !============ variable_entry: tnhusc !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_specific_humidity_due_to_convection units: s-1 cell_methods: time: mean long_name: Tendency of Specific Humidity due to Convection !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnhusc type: real !---------------------------------- ! !============ variable_entry: tnhusd !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_specific_humidity_due_to_diffusion units: s-1 cell_methods: time: mean long_name: Tendency of Specific Humidity due to Diffusion !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnhusd type: real !---------------------------------- ! !============ variable_entry: tnhusscpbl !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_specific_humidity_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing units: s-1 cell_methods: time: mean long_name: Tendency of Specific Humidity due to Stratiform Cloud Condensation and Evaporation !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnhusscpbl type: real !---------------------------------- ! !============ variable_entry: tnhusmp !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: tendency_of_specific_humidity_due_to_model_physics units: s-1 cell_methods: time: mean long_name: Tendency of Specific Humidity due to Model Physics comment: This should include sources and sinks from parametrized physics (e.g. convection, stratiform condensation/evaporation, etc.) and should exclude sources and sinks from resolved dynamics and diffusion. !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: tnhusmp type: real !---------------------------------- ! !============ variable_entry: pfull !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: air_pressure units: Pa cell_methods: time: mean long_name: Pressure on Model Levels comment: This field is needed only for models in which the pressure can't be calculated from the vertical coordinate information stored already for each variable. Thus, the pressures are needed for height or theta-coordinate models, for example, but not sigma- or eta-coordinate models. !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevel time out_name: pfull type: real !---------------------------------- ! !============ variable_entry: phalf !============ modeling_realm: atmos !---------------------------------- ! Variable attributes: !---------------------------------- standard_name: air_pressure units: Pa cell_methods: time: mean long_name: Pressure on Model Half-Levels comment: This field is needed only for models in which the pressure can't be calculated from the vertical coordinate information stored already for each variable. Thus, the pressures are needed for height or theta-coordinate models, for example, but not sigma- or eta-coordinate models. !---------------------------------- ! Additional variable information: !---------------------------------- dimensions: longitude latitude alevhalf time out_name: phalf type: real !---------------------------------- !