| 1 |
Disk devices in FreeBSD have names like '/dev/da0' while the corresponding |
| 2 |
pass-through devices have names like '/dev/pass0'. See the |
| 3 |
'camcontrol devlist' command for a list of available devices (registered |
| 4 |
with the CAM subsystem) and the mapping between "block" devices names |
| 5 |
and the corresponding pass-through device name. |
| 6 |
|
| 7 |
The usual sequence of "./configure ; make ; make install" can be used |
| 8 |
to build and install this package. If that fails try the "./autogen.sh" |
| 9 |
script prior to that sequence. |
| 10 |
|
| 11 |
Attempts to copy chunks around 64 KB and larger through the pt interface |
| 12 |
failed on a FreeBSD 7.0 with an "argument list too long" error message. |
| 13 |
There is an associated kernel message (viewable with dmesg) that an |
| 14 |
attempt has been made to map <n> bytes which is greater than |
| 15 |
DFLTPHYS(65536). Still a problem in FreeBSD 8.1 so restrict default bpt |
| 16 |
so bpt*ibs is less than or equal to 32 KB since there is pt overhead |
| 17 |
(over 700 bytes). |
| 18 |
|
| 19 |
ddpt can be built into a Debian package for kFreeBSD using the |
| 20 |
./build_debian.sh script in the top level directory. This has been tested |
| 21 |
with Debian 6.0 release. |
| 22 |
|
| 23 |
Doug Gilbert |
| 24 |
26th February 2011 |