Debian Codegraph @

ChangeLog

raw
1 The version number is hard-coded into src/ddpt.c (in a C string);
2 the rpm spec file: ddpt.spec ; the debian/changelog file;
3 and the configure.ac file (in the AC_INIT item).
4
5 Changelog for released ddpt-0.97 [20210421] [svn: r388]
6 - ddpt: add cdl operand for command duration limits
7 - ddpt: add oflag=nocreat and conv=nocreat that require
8 OFILE to exist, it won't be created
9 - ddpt: warn if disk has protection type 2 and cdbsz!=32
10 has not been used (it is required according to SBC-4)
11 - ddpt: cdbsz= operand can now take 2 comma-separated numbers
12 - NVMe devices can now be accessed via iflag=pt or oflag=pt
13 without those flags they will be accessed as block devices
14 - now accept --progress or -p as shorter form of
15 status=progress [borrowed from FreeBSD's dd]
16 - fix progress reporting when OFILE is /dev/null
17 - start using autoconf 2.70
18 - point svn:externals to sg3_utils release 1.46 (rev 891)
19
20 Changelog for ddpt-0.96 [20200303] [svn: r375]
21 - allow scatter gather lists for skip= and seek= where they can
22 reasonably be implemented
23 - add status=progress option, report every 2 minutes
24 -add status=sgl option to print internal sgls
25 - add --dry-run, --flexible and --quiet options
26 - add iflag=00 and iflag=ff for fill bytes
27 - add oflag=wstream for WRITE STREAM(16) on OFILE, STR_ID provided
28 by list_id=LID operand
29 - require job file to contain 'ddpt' argument as sanity check:`
30 either 'ddpt=<version_number>' or 'ddpt=r<revision_number>'
31 - add ddpt_sgl utility for list manipulations
32 - add support for Receive copy status(lid4) command
33 - add prefer_rcs flag and conversion for xcopy(odx)
34 - add support for locally assigned UUIDs in VPD page 0x83 (spc5r08)
35 - third party (extended) copy: add support for "point in time -
36 copy on write" type RODs, spc5r20
37 - add 'delta' throughput calculation (e.g. since previous report
38 with status=progress)
39 - add testing directory and scripts
40 - prepare.sh to test ddpt
41 - test_sgl.sh to test ddpt_sgl
42 - add --verify option to change from doing WRITE(OFILE) to doing
43 VERIFY(OFILE,BYTCHK=1)
44 - add --prefetch option to add PRE-FETCH(OFILE,IMMED) command to
45 the --verify seqeunce of commands
46 - change oflag=verify to oflag=wverify to distinguish it from the
47 new --verify option
48 - improve device designator descriptor handling
49 - resubmit IOs if EAGAIN, report count at completion if > 0
50 - fix SCSI recovered errors stopping copy
51 - align pass-through buffers to page boundaries
52 - fix reading fifo (stdin) and writing to regular file
53 - rework pr2serr() handling
54 - use sg_pt::set_scsi_pt_packet_id() with ascending counter, helps
55 debugging (mainly Linux)
56 - improve xcopy(odx) error reporting
57 - point svn:externals to rev 843 of sg3_utils (version 1.45)
58 - convert many two valued 'int's to bool
59 - upgrade automake to version 1.15 (U16.04)
60 - cleanup configure.ac + Makefile.am
61 - update BSD license from 3 to 2 clause aka FreeBSD
62 license (without reference to FreeBSD project)
63 - debian: bump compat file contents from 7 to 10
64
65 Changelog for ddpt-0.95 [20141226] [svn: r307]
66 - add oflag=verify[,bytchk] to write using the SCSI
67 WRITE AND VERIFY command
68 - add job file that holds options; specified either
69 freestanding on command line or after --job=
70 - show percent completed
71 - add DDPT_DEF_BS environment variable
72 - add iflag=ff to source 0xff bytes
73 - ddptctl: add --hex and --readonly options
74 - add atomic flag for WRITE ATOMIC(16) command on OFILE
75 - add warning when oflag=strunc copy interrupted
76 - win32: ddpt --wscan fixes
77 - point svn:externals to rev 620 of sg3_utils
78 - upgrade automake to version 1.14.1
79
80 Changelog for ddpt-0.94 [20140407] [svn: r277]
81 - xcopy: change default to send xcopy command to dst
82 - add XCOPY_TO_SRC and XCOPY_TO_DST environment
83 variables to guide where to send xcopy command
84 - odx: add new offloaded copy technique, also known
85 as "xcopy v2, lite", that exposes ROD Tokens
86 - ddpt supports 4 odx variants: full copy, zero
87 output blocks, read to tokens and write from
88 tokens. Latter two facilitate network copies
89 - add scatter-gather list capability to seek=,
90 skip= to read from command line, file or stdin
91 - ddptctl: add odx helper utility
92 - can issue individual PT, WUT, RRTI, Report All
93 Rod Tokens, and Copy Operation Abort commands
94 - can decode T10 defined info in Rod Token
95 - improve CL handling of short options (e.g. '-vv')
96 - point svn:externals to rev 563 of sg3_utils
97 - configure: add --disable-libsgutils option so
98 build bypasses that library if present
99
100 Changelog for ddpt-0.93 [20131113] [svn: r242]
101 - add xcopy support, new flags: xcopy, cat, dc;
102 new options: id_usage=, list_id=, prio=
103 - add intio=0|1 ; rework signal handling
104 - allow tape device in non-pt mode
105 - fix fifo read when bs is large
106 - add delay=MS,W_MS for bandwidth limiting
107 - add oflag=ignoreew,pad,nofm,nopad for tape
108 - add iseek= option, synonym for skip=
109 - add oseek= option, synonym for seek=
110 - add protect=RDP,WRP option
111 - add cdbsz=32 option for READ(32) and WRITE(32)
112 - add rarc flag for scsi read cdbs
113 - add block flag for pt (non blocking by default)
114 - fix overflow on OFILE when input fifo
115 - ./configure options:
116 - change --enable-no-linux-bsg to --disable-linuxbsg
117 - add --disable-scsistrings to reduce utility size
118 with non-libsgutils build
119 - reduce ddpt.c size by adding ddpt_pt.c
120 - win32: fixes for cygwin version 1.7.17 headers
121 - translate O_EXCL to no sharing
122 - point svn:externals to rev 522 of sg3_utils
123 - upgrade automake to version 1.13.3
124
125 Changelog for ddpt-0.92 [20110217] [svn: r157]
126 - when pt used on block device and discrepancy between size
127 of block device and read capacity size, require force flag
128 - add coe support for input block devices and regular files
129 - support conv=fdatasync, conv=fsync, oflag=fdatasync and
130 oflag=fsync; called at end of copy
131 - allow partial writes of trailing bytes when output is
132 regular file or fifo (stdout), ignore if block or pt device
133 - fix stdin, stdout and fifo handling problems
134 - if iflag=sparse and of=/dev/null (or not given) warn but
135 set oflag=sparse and continue
136 - treat unrecovered errors as partial (as dd does)
137 - win32: add '--wscan' option to scan for devices and volumes
138 - select SPT direct pt interface
139 - add estimate of remaining time in progress signal handler
140 - accept but ignore cbs= option
141 - error reporting clean up
142 - add AM_MAINTAINER_MODE to configure.ac to lessen build issues
143
144 Changelog for ddpt-0.91 [20100920] [svn: r121]
145 - rework copy loop.
146 - extend bpt=BPT to bpt=BPR[,OBPC] spare+sparse granularity
147 - change BPT default to vary from 8192 to 1 depending on IBS
148 - add oflag=resume logic
149 - change oflag=sparse to extend regular OFILE with a final
150 block write, if required
151 - add oflag=strunc to also do sparse writes but to extend
152 regular OFILE with ftruncate, if required
153 - change 'bs=' option to set IBS and OBS; 'ibs=' and 'obs='
154 can coexist but not with 'bs='. [Closer to dd semantics]
155 - conv=noerror,null,resume,sparing,sparse,sync now permitted
156 - add oflag=trunc and conv=trunc (default: overwrite)
157 - quietly ignored if resume, needed due to sequence
158 - add oflag=trim for TRIM/UNMAP on pt OFILEs
159 - add iflag=self or oflag=self for self-trim
160 - add oflag=nowrite to bypass writes+truncates (does trims)
161 - add iflag=errblk to write bad LBAs to file
162 - if sense data deficient, write a LBA range to file
163 - add iflag=norcap or oflag=norcap to bypass the SCSI READ
164 CAPACITY command on pt devices
165 - discrepancies between ibs or obs and READ CAPACITY supplied
166 block lengths abort the copy. This can be overridden by
167 iflag=force or oflag=force on pt devices
168 - optical memory devices (pdt=7) added to cd/dvd readers (pdt=5)
169 that don't need sense valid=1 to accept info field (when > 0)
170 - rework short read logic for block and regular files
171 - treat linux bsg devices as implicit pt devices
172
173 Changelog for ddpt-0.90 [20100508] [svn: r85]
174 - copied from sg_dd utility in sg3_utils package
175 - change name from sgdd to ddpt (package and utility name)
176 - ibs and obs can differ when ((ibs * bpt) % obs) == 0)
177 - change 'sg_io' flag to 'pt' (for pass-through)
178 - change 'dsync' flag to 'sync'; 'ssync' flag for SCSI
179 SYNCHRONIZE CACHE command; add 'nocache' flag
180 - 'if=IFILE' must be given, to read from stdin use 'if=-'
181 - 'of=OFILE' changed to default to /dev/null (was stdout)
182 - if 'nocache' flag call posix_fadvise(SEQUENTIAL) on
183 input fd and posix_fadvise(DONTNEED) during copy
184 - add 'fua_nv' flag
185 - when multiple unrecovered errors report lowest and
186 highest LBA
187 - call sg_set_binary_mode() on fds (for windows)
188 - resubmit pass-through reads and writes if interrupted
189 - drop Linux raw file support
190 - drop READ LONG logic (coe=2 and coe=3)
191 - add write sparing support (oflag=sparing)
192 - add linux bsg support
193 - sg_pt_win32: define WIN32_SPT_DIRECT via config.h
194 - calculate COUNT for regular files when required
195 - accept 'count=-1' to mean calculate COUNT
196 - accept '-V' as synonym for '--version'
197 - point svn:externals to rev 334 of sg3_utils