| 1 |
/*************************************************************************** |
| 2 |
* _ _ ____ _ |
| 3 |
* Project ___| | | | _ \| | |
| 4 |
* / __| | | | |_) | | |
| 5 |
* | (__| |_| | _ <| |___ |
| 6 |
* \___|\___/|_| \_\_____| |
| 7 |
* |
| 8 |
* Copyright (C) 1998 - 2019, Daniel Stenberg, <[email protected]>, et al. |
| 9 |
* |
| 10 |
* This software is licensed as described in the file COPYING, which |
| 11 |
* you should have received as part of this distribution. The terms |
| 12 |
* are also available at https://curl.haxx.se/docs/copyright.html. |
| 13 |
* |
| 14 |
* You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| 15 |
* copies of the Software, and permit persons to whom the Software is |
| 16 |
* furnished to do so, under the terms of the COPYING file. |
| 17 |
* |
| 18 |
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| 19 |
* KIND, either express or implied. |
| 20 |
* |
| 21 |
* RFC2195 CRAM-MD5 authentication |
| 22 |
* RFC2595 Using TLS with IMAP, POP3 and ACAP |
| 23 |
* RFC2831 DIGEST-MD5 authentication |
| 24 |
* RFC3501 IMAPv4 protocol |
| 25 |
* RFC4422 Simple Authentication and Security Layer (SASL) |
| 26 |
* RFC4616 PLAIN authentication |
| 27 |
* RFC4752 The Kerberos V5 ("GSSAPI") SASL Mechanism |
| 28 |
* RFC4959 IMAP Extension for SASL Initial Client Response |
| 29 |
* RFC5092 IMAP URL Scheme |
| 30 |
* RFC6749 OAuth 2.0 Authorization Framework |
| 31 |
* RFC8314 Use of TLS for Email Submission and Access |
| 32 |
* Draft LOGIN SASL Mechanism <draft-murchison-sasl-login-00.txt> |
| 33 |
* |
| 34 |
***************************************************************************/ |
| 35 |
|
| 36 |
#include "curl_setup.h" |
| 37 |
|
| 38 |
#ifndef CURL_DISABLE_IMAP |
| 39 |
|
| 40 |
#ifdef HAVE_NETINET_IN_H |
| 41 |
#include <netinet/in.h> |
| 42 |
#endif |
| 43 |
#ifdef HAVE_ARPA_INET_H |
| 44 |
#include <arpa/inet.h> |
| 45 |
#endif |
| 46 |
#ifdef HAVE_UTSNAME_H |
| 47 |
#include <sys/utsname.h> |
| 48 |
#endif |
| 49 |
#ifdef HAVE_NETDB_H |
| 50 |
#include <netdb.h> |
| 51 |
#endif |
| 52 |
#ifdef __VMS |
| 53 |
#include <in.h> |
| 54 |
#include <inet.h> |
| 55 |
#endif |
| 56 |
|
| 57 |
#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) |
| 58 |
#undef in_addr_t |
| 59 |
#define in_addr_t unsigned long |
| 60 |
#endif |
| 61 |
|
| 62 |
#include <curl/curl.h> |
| 63 |
#include "urldata.h" |
| 64 |
#include "sendf.h" |
| 65 |
#include "hostip.h" |
| 66 |
#include "progress.h" |
| 67 |
#include "transfer.h" |
| 68 |
#include "escape.h" |
| 69 |
#include "http.h" /* for HTTP proxy tunnel stuff */ |
| 70 |
#include "socks.h" |
| 71 |
#include "imap.h" |
| 72 |
#include "mime.h" |
| 73 |
#include "strtoofft.h" |
| 74 |
#include "strcase.h" |
| 75 |
#include "vtls/vtls.h" |
| 76 |
#include "connect.h" |
| 77 |
#include "strerror.h" |
| 78 |
#include "select.h" |
| 79 |
#include "multiif.h" |
| 80 |
#include "url.h" |
| 81 |
#include "strcase.h" |
| 82 |
#include "curl_sasl.h" |
| 83 |
#include "warnless.h" |
| 84 |
|
| 85 |
/* The last 3 #include files should be in this order */ |
| 86 |
#include "curl_printf.h" |
| 87 |
#include "curl_memory.h" |
| 88 |
#include "memdebug.h" |
| 89 |
|
| 90 |
/* Local API functions */ |
| 91 |
static CURLcode imap_regular_transfer(struct connectdata *conn, bool *done); |
| 92 |
static CURLcode imap_do(struct connectdata *conn, bool *done); |
| 93 |
static CURLcode imap_done(struct connectdata *conn, CURLcode status, |
| 94 |
bool premature); |
| 95 |
static CURLcode imap_connect(struct connectdata *conn, bool *done); |
| 96 |
static CURLcode imap_disconnect(struct connectdata *conn, bool dead); |
| 97 |
static CURLcode imap_multi_statemach(struct connectdata *conn, bool *done); |
| 98 |
static int imap_getsock(struct connectdata *conn, curl_socket_t *socks); |
| 99 |
static CURLcode imap_doing(struct connectdata *conn, bool *dophase_done); |
| 100 |
static CURLcode imap_setup_connection(struct connectdata *conn); |
| 101 |
static char *imap_atom(const char *str, bool escape_only); |
| 102 |
static CURLcode imap_sendf(struct connectdata *conn, const char *fmt, ...); |
| 103 |
static CURLcode imap_parse_url_options(struct connectdata *conn); |
| 104 |
static CURLcode imap_parse_url_path(struct connectdata *conn); |
| 105 |
static CURLcode imap_parse_custom_request(struct connectdata *conn); |
| 106 |
static CURLcode imap_perform_authenticate(struct connectdata *conn, |
| 107 |
const char *mech, |
| 108 |
const char *initresp); |
| 109 |
static CURLcode imap_continue_authenticate(struct connectdata *conn, |
| 110 |
const char *resp); |
| 111 |
static void imap_get_message(char *buffer, char **outptr); |
| 112 |
|
| 113 |
/* |
| 114 |
* IMAP protocol handler. |
| 115 |
*/ |
| 116 |
|
| 117 |
const struct Curl_handler Curl_handler_imap = { |
| 118 |
"IMAP", /* scheme */ |
| 119 |
imap_setup_connection, /* setup_connection */ |
| 120 |
imap_do, /* do_it */ |
| 121 |
imap_done, /* done */ |
| 122 |
ZERO_NULL, /* do_more */ |
| 123 |
imap_connect, /* connect_it */ |
| 124 |
imap_multi_statemach, /* connecting */ |
| 125 |
imap_doing, /* doing */ |
| 126 |
imap_getsock, /* proto_getsock */ |
| 127 |
imap_getsock, /* doing_getsock */ |
| 128 |
ZERO_NULL, /* domore_getsock */ |
| 129 |
ZERO_NULL, /* perform_getsock */ |
| 130 |
imap_disconnect, /* disconnect */ |
| 131 |
ZERO_NULL, /* readwrite */ |
| 132 |
ZERO_NULL, /* connection_check */ |
| 133 |
PORT_IMAP, /* defport */ |
| 134 |
CURLPROTO_IMAP, /* protocol */ |
| 135 |
PROTOPT_CLOSEACTION| /* flags */ |
| 136 |
PROTOPT_URLOPTIONS |
| 137 |
}; |
| 138 |
|
| 139 |
#ifdef USE_SSL |
| 140 |
/* |
| 141 |
* IMAPS protocol handler. |
| 142 |
*/ |
| 143 |
|
| 144 |
const struct Curl_handler Curl_handler_imaps = { |
| 145 |
"IMAPS", /* scheme */ |
| 146 |
imap_setup_connection, /* setup_connection */ |
| 147 |
imap_do, /* do_it */ |
| 148 |
imap_done, /* done */ |
| 149 |
ZERO_NULL, /* do_more */ |
| 150 |
imap_connect, /* connect_it */ |
| 151 |
imap_multi_statemach, /* connecting */ |
| 152 |
imap_doing, /* doing */ |
| 153 |
imap_getsock, /* proto_getsock */ |
| 154 |
imap_getsock, /* doing_getsock */ |
| 155 |
ZERO_NULL, /* domore_getsock */ |
| 156 |
ZERO_NULL, /* perform_getsock */ |
| 157 |
imap_disconnect, /* disconnect */ |
| 158 |
ZERO_NULL, /* readwrite */ |
| 159 |
ZERO_NULL, /* connection_check */ |
| 160 |
PORT_IMAPS, /* defport */ |
| 161 |
CURLPROTO_IMAPS, /* protocol */ |
| 162 |
PROTOPT_CLOSEACTION | PROTOPT_SSL | /* flags */ |
| 163 |
PROTOPT_URLOPTIONS |
| 164 |
}; |
| 165 |
#endif |
| 166 |
|
| 167 |
#define IMAP_RESP_OK 1 |
| 168 |
#define IMAP_RESP_NOT_OK 2 |
| 169 |
#define IMAP_RESP_PREAUTH 3 |
| 170 |
|
| 171 |
/* SASL parameters for the imap protocol */ |
| 172 |
static const struct SASLproto saslimap = { |
| 173 |
"imap", /* The service name */ |
| 174 |
'+', /* Code received when continuation is expected */ |
| 175 |
IMAP_RESP_OK, /* Code to receive upon authentication success */ |
| 176 |
0, /* Maximum initial response length (no max) */ |
| 177 |
imap_perform_authenticate, /* Send authentication command */ |
| 178 |
imap_continue_authenticate, /* Send authentication continuation */ |
| 179 |
imap_get_message /* Get SASL response message */ |
| 180 |
}; |
| 181 |
|
| 182 |
|
| 183 |
#ifdef USE_SSL |
| 184 |
static void imap_to_imaps(struct connectdata *conn) |
| 185 |
{ |
| 186 |
/* Change the connection handler */ |
| 187 |
conn->handler = &Curl_handler_imaps; |
| 188 |
|
| 189 |
/* Set the connection's upgraded to TLS flag */ |
| 190 |
conn->tls_upgraded = TRUE; |
| 191 |
} |
| 192 |
#else |
| 193 |
#define imap_to_imaps(x) Curl_nop_stmt |
| 194 |
#endif |
| 195 |
|
| 196 |
/*********************************************************************** |
| 197 |
* |
| 198 |
* imap_matchresp() |
| 199 |
* |
| 200 |
* Determines whether the untagged response is related to the specified |
| 201 |
* command by checking if it is in format "* <command-name> ..." or |
| 202 |
* "* <number> <command-name> ...". |
| 203 |
* |
| 204 |
* The "* " marker is assumed to have already been checked by the caller. |
| 205 |
*/ |
| 206 |
static bool imap_matchresp(const char *line, size_t len, const char *cmd) |
| 207 |
{ |
| 208 |
const char *end = line + len; |
| 209 |
size_t cmd_len = strlen(cmd); |
| 210 |
|
| 211 |
/* Skip the untagged response marker */ |
| 212 |
line += 2; |
| 213 |
|
| 214 |
/* Do we have a number after the marker? */ |
| 215 |
if(line < end && ISDIGIT(*line)) { |
| 216 |
/* Skip the number */ |
| 217 |
do |
| 218 |
line++; |
| 219 |
while(line < end && ISDIGIT(*line)); |
| 220 |
|
| 221 |
/* Do we have the space character? */ |
| 222 |
if(line == end || *line != ' ') |
| 223 |
return FALSE; |
| 224 |
|
| 225 |
line++; |
| 226 |
} |
| 227 |
|
| 228 |
/* Does the command name match and is it followed by a space character or at |
| 229 |
the end of line? */ |
| 230 |
if(line + cmd_len <= end && strncasecompare(line, cmd, cmd_len) && |
| 231 |
(line[cmd_len] == ' ' || line + cmd_len + 2 == end)) |
| 232 |
return TRUE; |
| 233 |
|
| 234 |
return FALSE; |
| 235 |
} |
| 236 |
|
| 237 |
/*********************************************************************** |
| 238 |
* |
| 239 |
* imap_endofresp() |
| 240 |
* |
| 241 |
* Checks whether the given string is a valid tagged, untagged or continuation |
| 242 |
* response which can be processed by the response handler. |
| 243 |
*/ |
| 244 |
static bool imap_endofresp(struct connectdata *conn, char *line, size_t len, |
| 245 |
int *resp) |
| 246 |
{ |
| 247 |
struct IMAP *imap = conn->data->req.protop; |
| 248 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 249 |
const char *id = imapc->resptag; |
| 250 |
size_t id_len = strlen(id); |
| 251 |
|
| 252 |
/* Do we have a tagged command response? */ |
| 253 |
if(len >= id_len + 1 && !memcmp(id, line, id_len) && line[id_len] == ' ') { |
| 254 |
line += id_len + 1; |
| 255 |
len -= id_len + 1; |
| 256 |
|
| 257 |
if(len >= 2 && !memcmp(line, "OK", 2)) |
| 258 |
*resp = IMAP_RESP_OK; |
| 259 |
else if(len >= 7 && !memcmp(line, "PREAUTH", 7)) |
| 260 |
*resp = IMAP_RESP_PREAUTH; |
| 261 |
else |
| 262 |
*resp = IMAP_RESP_NOT_OK; |
| 263 |
|
| 264 |
return TRUE; |
| 265 |
} |
| 266 |
|
| 267 |
/* Do we have an untagged command response? */ |
| 268 |
if(len >= 2 && !memcmp("* ", line, 2)) { |
| 269 |
switch(imapc->state) { |
| 270 |
/* States which are interested in untagged responses */ |
| 271 |
case IMAP_CAPABILITY: |
| 272 |
if(!imap_matchresp(line, len, "CAPABILITY")) |
| 273 |
return FALSE; |
| 274 |
break; |
| 275 |
|
| 276 |
case IMAP_LIST: |
| 277 |
if((!imap->custom && !imap_matchresp(line, len, "LIST")) || |
| 278 |
(imap->custom && !imap_matchresp(line, len, imap->custom) && |
| 279 |
(!strcasecompare(imap->custom, "STORE") || |
| 280 |
!imap_matchresp(line, len, "FETCH")) && |
| 281 |
!strcasecompare(imap->custom, "SELECT") && |
| 282 |
!strcasecompare(imap->custom, "EXAMINE") && |
| 283 |
!strcasecompare(imap->custom, "SEARCH") && |
| 284 |
!strcasecompare(imap->custom, "EXPUNGE") && |
| 285 |
!strcasecompare(imap->custom, "LSUB") && |
| 286 |
!strcasecompare(imap->custom, "UID") && |
| 287 |
!strcasecompare(imap->custom, "NOOP"))) |
| 288 |
return FALSE; |
| 289 |
break; |
| 290 |
|
| 291 |
case IMAP_SELECT: |
| 292 |
/* SELECT is special in that its untagged responses do not have a |
| 293 |
common prefix so accept anything! */ |
| 294 |
break; |
| 295 |
|
| 296 |
case IMAP_FETCH: |
| 297 |
if(!imap_matchresp(line, len, "FETCH")) |
| 298 |
return FALSE; |
| 299 |
break; |
| 300 |
|
| 301 |
case IMAP_SEARCH: |
| 302 |
if(!imap_matchresp(line, len, "SEARCH")) |
| 303 |
return FALSE; |
| 304 |
break; |
| 305 |
|
| 306 |
/* Ignore other untagged responses */ |
| 307 |
default: |
| 308 |
return FALSE; |
| 309 |
} |
| 310 |
|
| 311 |
*resp = '*'; |
| 312 |
return TRUE; |
| 313 |
} |
| 314 |
|
| 315 |
/* Do we have a continuation response? This should be a + symbol followed by |
| 316 |
a space and optionally some text as per RFC-3501 for the AUTHENTICATE and |
| 317 |
APPEND commands and as outlined in Section 4. Examples of RFC-4959 but |
| 318 |
some e-mail servers ignore this and only send a single + instead. */ |
| 319 |
if(imap && !imap->custom && ((len == 3 && line[0] == '+') || |
| 320 |
(len >= 2 && !memcmp("+ ", line, 2)))) { |
| 321 |
switch(imapc->state) { |
| 322 |
/* States which are interested in continuation responses */ |
| 323 |
case IMAP_AUTHENTICATE: |
| 324 |
case IMAP_APPEND: |
| 325 |
*resp = '+'; |
| 326 |
break; |
| 327 |
|
| 328 |
default: |
| 329 |
failf(conn->data, "Unexpected continuation response"); |
| 330 |
*resp = -1; |
| 331 |
break; |
| 332 |
} |
| 333 |
|
| 334 |
return TRUE; |
| 335 |
} |
| 336 |
|
| 337 |
return FALSE; /* Nothing for us */ |
| 338 |
} |
| 339 |
|
| 340 |
/*********************************************************************** |
| 341 |
* |
| 342 |
* imap_get_message() |
| 343 |
* |
| 344 |
* Gets the authentication message from the response buffer. |
| 345 |
*/ |
| 346 |
static void imap_get_message(char *buffer, char **outptr) |
| 347 |
{ |
| 348 |
size_t len = strlen(buffer); |
| 349 |
char *message = NULL; |
| 350 |
|
| 351 |
if(len > 2) { |
| 352 |
/* Find the start of the message */ |
| 353 |
len -= 2; |
| 354 |
for(message = buffer + 2; *message == ' ' || *message == '\t'; |
| 355 |
message++, len--) |
| 356 |
; |
| 357 |
|
| 358 |
/* Find the end of the message */ |
| 359 |
for(; len--;) |
| 360 |
if(message[len] != '\r' && message[len] != '\n' && message[len] != ' ' && |
| 361 |
message[len] != '\t') |
| 362 |
break; |
| 363 |
|
| 364 |
/* Terminate the message */ |
| 365 |
if(++len) { |
| 366 |
message[len] = '\0'; |
| 367 |
} |
| 368 |
} |
| 369 |
else |
| 370 |
/* junk input => zero length output */ |
| 371 |
message = &buffer[len]; |
| 372 |
|
| 373 |
*outptr = message; |
| 374 |
} |
| 375 |
|
| 376 |
/*********************************************************************** |
| 377 |
* |
| 378 |
* state() |
| 379 |
* |
| 380 |
* This is the ONLY way to change IMAP state! |
| 381 |
*/ |
| 382 |
static void state(struct connectdata *conn, imapstate newstate) |
| 383 |
{ |
| 384 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 385 |
#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) |
| 386 |
/* for debug purposes */ |
| 387 |
static const char * const names[]={ |
| 388 |
"STOP", |
| 389 |
"SERVERGREET", |
| 390 |
"CAPABILITY", |
| 391 |
"STARTTLS", |
| 392 |
"UPGRADETLS", |
| 393 |
"AUTHENTICATE", |
| 394 |
"LOGIN", |
| 395 |
"LIST", |
| 396 |
"SELECT", |
| 397 |
"FETCH", |
| 398 |
"FETCH_FINAL", |
| 399 |
"APPEND", |
| 400 |
"APPEND_FINAL", |
| 401 |
"SEARCH", |
| 402 |
"LOGOUT", |
| 403 |
/* LAST */ |
| 404 |
}; |
| 405 |
|
| 406 |
if(imapc->state != newstate) |
| 407 |
infof(conn->data, "IMAP %p state change from %s to %s\n", |
| 408 |
(void *)imapc, names[imapc->state], names[newstate]); |
| 409 |
#endif |
| 410 |
|
| 411 |
imapc->state = newstate; |
| 412 |
} |
| 413 |
|
| 414 |
/*********************************************************************** |
| 415 |
* |
| 416 |
* imap_perform_capability() |
| 417 |
* |
| 418 |
* Sends the CAPABILITY command in order to obtain a list of server side |
| 419 |
* supported capabilities. |
| 420 |
*/ |
| 421 |
static CURLcode imap_perform_capability(struct connectdata *conn) |
| 422 |
{ |
| 423 |
CURLcode result = CURLE_OK; |
| 424 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 425 |
imapc->sasl.authmechs = SASL_AUTH_NONE; /* No known auth. mechanisms yet */ |
| 426 |
imapc->sasl.authused = SASL_AUTH_NONE; /* Clear the auth. mechanism used */ |
| 427 |
imapc->tls_supported = FALSE; /* Clear the TLS capability */ |
| 428 |
|
| 429 |
/* Send the CAPABILITY command */ |
| 430 |
result = imap_sendf(conn, "CAPABILITY"); |
| 431 |
|
| 432 |
if(!result) |
| 433 |
state(conn, IMAP_CAPABILITY); |
| 434 |
|
| 435 |
return result; |
| 436 |
} |
| 437 |
|
| 438 |
/*********************************************************************** |
| 439 |
* |
| 440 |
* imap_perform_starttls() |
| 441 |
* |
| 442 |
* Sends the STARTTLS command to start the upgrade to TLS. |
| 443 |
*/ |
| 444 |
static CURLcode imap_perform_starttls(struct connectdata *conn) |
| 445 |
{ |
| 446 |
/* Send the STARTTLS command */ |
| 447 |
CURLcode result = imap_sendf(conn, "STARTTLS"); |
| 448 |
|
| 449 |
if(!result) |
| 450 |
state(conn, IMAP_STARTTLS); |
| 451 |
|
| 452 |
return result; |
| 453 |
} |
| 454 |
|
| 455 |
/*********************************************************************** |
| 456 |
* |
| 457 |
* imap_perform_upgrade_tls() |
| 458 |
* |
| 459 |
* Performs the upgrade to TLS. |
| 460 |
*/ |
| 461 |
static CURLcode imap_perform_upgrade_tls(struct connectdata *conn) |
| 462 |
{ |
| 463 |
/* Start the SSL connection */ |
| 464 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 465 |
CURLcode result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, |
| 466 |
&imapc->ssldone); |
| 467 |
|
| 468 |
if(!result) { |
| 469 |
if(imapc->state != IMAP_UPGRADETLS) |
| 470 |
state(conn, IMAP_UPGRADETLS); |
| 471 |
|
| 472 |
if(imapc->ssldone) { |
| 473 |
imap_to_imaps(conn); |
| 474 |
result = imap_perform_capability(conn); |
| 475 |
} |
| 476 |
} |
| 477 |
|
| 478 |
return result; |
| 479 |
} |
| 480 |
|
| 481 |
/*********************************************************************** |
| 482 |
* |
| 483 |
* imap_perform_login() |
| 484 |
* |
| 485 |
* Sends a clear text LOGIN command to authenticate with. |
| 486 |
*/ |
| 487 |
static CURLcode imap_perform_login(struct connectdata *conn) |
| 488 |
{ |
| 489 |
CURLcode result = CURLE_OK; |
| 490 |
char *user; |
| 491 |
char *passwd; |
| 492 |
|
| 493 |
/* Check we have a username and password to authenticate with and end the |
| 494 |
connect phase if we don't */ |
| 495 |
if(!conn->bits.user_passwd) { |
| 496 |
state(conn, IMAP_STOP); |
| 497 |
|
| 498 |
return result; |
| 499 |
} |
| 500 |
|
| 501 |
/* Make sure the username and password are in the correct atom format */ |
| 502 |
user = imap_atom(conn->user, false); |
| 503 |
passwd = imap_atom(conn->passwd, false); |
| 504 |
|
| 505 |
/* Send the LOGIN command */ |
| 506 |
result = imap_sendf(conn, "LOGIN %s %s", user ? user : "", |
| 507 |
passwd ? passwd : ""); |
| 508 |
|
| 509 |
free(user); |
| 510 |
free(passwd); |
| 511 |
|
| 512 |
if(!result) |
| 513 |
state(conn, IMAP_LOGIN); |
| 514 |
|
| 515 |
return result; |
| 516 |
} |
| 517 |
|
| 518 |
/*********************************************************************** |
| 519 |
* |
| 520 |
* imap_perform_authenticate() |
| 521 |
* |
| 522 |
* Sends an AUTHENTICATE command allowing the client to login with the given |
| 523 |
* SASL authentication mechanism. |
| 524 |
*/ |
| 525 |
static CURLcode imap_perform_authenticate(struct connectdata *conn, |
| 526 |
const char *mech, |
| 527 |
const char *initresp) |
| 528 |
{ |
| 529 |
CURLcode result = CURLE_OK; |
| 530 |
|
| 531 |
if(initresp) { |
| 532 |
/* Send the AUTHENTICATE command with the initial response */ |
| 533 |
result = imap_sendf(conn, "AUTHENTICATE %s %s", mech, initresp); |
| 534 |
} |
| 535 |
else { |
| 536 |
/* Send the AUTHENTICATE command */ |
| 537 |
result = imap_sendf(conn, "AUTHENTICATE %s", mech); |
| 538 |
} |
| 539 |
|
| 540 |
return result; |
| 541 |
} |
| 542 |
|
| 543 |
/*********************************************************************** |
| 544 |
* |
| 545 |
* imap_continue_authenticate() |
| 546 |
* |
| 547 |
* Sends SASL continuation data or cancellation. |
| 548 |
*/ |
| 549 |
static CURLcode imap_continue_authenticate(struct connectdata *conn, |
| 550 |
const char *resp) |
| 551 |
{ |
| 552 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 553 |
|
| 554 |
return Curl_pp_sendf(&imapc->pp, "%s", resp); |
| 555 |
} |
| 556 |
|
| 557 |
/*********************************************************************** |
| 558 |
* |
| 559 |
* imap_perform_authentication() |
| 560 |
* |
| 561 |
* Initiates the authentication sequence, with the appropriate SASL |
| 562 |
* authentication mechanism, falling back to clear text should a common |
| 563 |
* mechanism not be available between the client and server. |
| 564 |
*/ |
| 565 |
static CURLcode imap_perform_authentication(struct connectdata *conn) |
| 566 |
{ |
| 567 |
CURLcode result = CURLE_OK; |
| 568 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 569 |
saslprogress progress; |
| 570 |
|
| 571 |
/* Check if already authenticated OR if there is enough data to authenticate |
| 572 |
with and end the connect phase if we don't */ |
| 573 |
if(imapc->preauth || |
| 574 |
!Curl_sasl_can_authenticate(&imapc->sasl, conn)) { |
| 575 |
state(conn, IMAP_STOP); |
| 576 |
return result; |
| 577 |
} |
| 578 |
|
| 579 |
/* Calculate the SASL login details */ |
| 580 |
result = Curl_sasl_start(&imapc->sasl, conn, imapc->ir_supported, &progress); |
| 581 |
|
| 582 |
if(!result) { |
| 583 |
if(progress == SASL_INPROGRESS) |
| 584 |
state(conn, IMAP_AUTHENTICATE); |
| 585 |
else if(!imapc->login_disabled && (imapc->preftype & IMAP_TYPE_CLEARTEXT)) |
| 586 |
/* Perform clear text authentication */ |
| 587 |
result = imap_perform_login(conn); |
| 588 |
else { |
| 589 |
/* Other mechanisms not supported */ |
| 590 |
infof(conn->data, "No known authentication mechanisms supported!\n"); |
| 591 |
result = CURLE_LOGIN_DENIED; |
| 592 |
} |
| 593 |
} |
| 594 |
|
| 595 |
return result; |
| 596 |
} |
| 597 |
|
| 598 |
/*********************************************************************** |
| 599 |
* |
| 600 |
* imap_perform_list() |
| 601 |
* |
| 602 |
* Sends a LIST command or an alternative custom request. |
| 603 |
*/ |
| 604 |
static CURLcode imap_perform_list(struct connectdata *conn) |
| 605 |
{ |
| 606 |
CURLcode result = CURLE_OK; |
| 607 |
struct Curl_easy *data = conn->data; |
| 608 |
struct IMAP *imap = data->req.protop; |
| 609 |
|
| 610 |
if(imap->custom) |
| 611 |
/* Send the custom request */ |
| 612 |
result = imap_sendf(conn, "%s%s", imap->custom, |
| 613 |
imap->custom_params ? imap->custom_params : ""); |
| 614 |
else { |
| 615 |
/* Make sure the mailbox is in the correct atom format if necessary */ |
| 616 |
char *mailbox = imap->mailbox ? imap_atom(imap->mailbox, true) |
| 617 |
: strdup(""); |
| 618 |
if(!mailbox) |
| 619 |
return CURLE_OUT_OF_MEMORY; |
| 620 |
|
| 621 |
/* Send the LIST command */ |
| 622 |
result = imap_sendf(conn, "LIST \"%s\" *", mailbox); |
| 623 |
|
| 624 |
free(mailbox); |
| 625 |
} |
| 626 |
|
| 627 |
if(!result) |
| 628 |
state(conn, IMAP_LIST); |
| 629 |
|
| 630 |
return result; |
| 631 |
} |
| 632 |
|
| 633 |
/*********************************************************************** |
| 634 |
* |
| 635 |
* imap_perform_select() |
| 636 |
* |
| 637 |
* Sends a SELECT command to ask the server to change the selected mailbox. |
| 638 |
*/ |
| 639 |
static CURLcode imap_perform_select(struct connectdata *conn) |
| 640 |
{ |
| 641 |
CURLcode result = CURLE_OK; |
| 642 |
struct Curl_easy *data = conn->data; |
| 643 |
struct IMAP *imap = data->req.protop; |
| 644 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 645 |
char *mailbox; |
| 646 |
|
| 647 |
/* Invalidate old information as we are switching mailboxes */ |
| 648 |
Curl_safefree(imapc->mailbox); |
| 649 |
Curl_safefree(imapc->mailbox_uidvalidity); |
| 650 |
|
| 651 |
/* Check we have a mailbox */ |
| 652 |
if(!imap->mailbox) { |
| 653 |
failf(conn->data, "Cannot SELECT without a mailbox."); |
| 654 |
return CURLE_URL_MALFORMAT; |
| 655 |
} |
| 656 |
|
| 657 |
/* Make sure the mailbox is in the correct atom format */ |
| 658 |
mailbox = imap_atom(imap->mailbox, false); |
| 659 |
if(!mailbox) |
| 660 |
return CURLE_OUT_OF_MEMORY; |
| 661 |
|
| 662 |
/* Send the SELECT command */ |
| 663 |
result = imap_sendf(conn, "SELECT %s", mailbox); |
| 664 |
|
| 665 |
free(mailbox); |
| 666 |
|
| 667 |
if(!result) |
| 668 |
state(conn, IMAP_SELECT); |
| 669 |
|
| 670 |
return result; |
| 671 |
} |
| 672 |
|
| 673 |
/*********************************************************************** |
| 674 |
* |
| 675 |
* imap_perform_fetch() |
| 676 |
* |
| 677 |
* Sends a FETCH command to initiate the download of a message. |
| 678 |
*/ |
| 679 |
static CURLcode imap_perform_fetch(struct connectdata *conn) |
| 680 |
{ |
| 681 |
CURLcode result = CURLE_OK; |
| 682 |
struct IMAP *imap = conn->data->req.protop; |
| 683 |
/* Check we have a UID */ |
| 684 |
if(imap->uid) { |
| 685 |
|
| 686 |
/* Send the FETCH command */ |
| 687 |
if(imap->partial) |
| 688 |
result = imap_sendf(conn, "UID FETCH %s BODY[%s]<%s>", |
| 689 |
imap->uid, |
| 690 |
imap->section ? imap->section : "", |
| 691 |
imap->partial); |
| 692 |
else |
| 693 |
result = imap_sendf(conn, "UID FETCH %s BODY[%s]", |
| 694 |
imap->uid, |
| 695 |
imap->section ? imap->section : ""); |
| 696 |
} |
| 697 |
else if(imap->mindex) { |
| 698 |
|
| 699 |
/* Send the FETCH command */ |
| 700 |
if(imap->partial) |
| 701 |
result = imap_sendf(conn, "FETCH %s BODY[%s]<%s>", |
| 702 |
imap->mindex, |
| 703 |
imap->section ? imap->section : "", |
| 704 |
imap->partial); |
| 705 |
else |
| 706 |
result = imap_sendf(conn, "FETCH %s BODY[%s]", |
| 707 |
imap->mindex, |
| 708 |
imap->section ? imap->section : ""); |
| 709 |
} |
| 710 |
else { |
| 711 |
failf(conn->data, "Cannot FETCH without a UID."); |
| 712 |
return CURLE_URL_MALFORMAT; |
| 713 |
} |
| 714 |
if(!result) |
| 715 |
state(conn, IMAP_FETCH); |
| 716 |
|
| 717 |
return result; |
| 718 |
} |
| 719 |
|
| 720 |
/*********************************************************************** |
| 721 |
* |
| 722 |
* imap_perform_append() |
| 723 |
* |
| 724 |
* Sends an APPEND command to initiate the upload of a message. |
| 725 |
*/ |
| 726 |
static CURLcode imap_perform_append(struct connectdata *conn) |
| 727 |
{ |
| 728 |
CURLcode result = CURLE_OK; |
| 729 |
struct Curl_easy *data = conn->data; |
| 730 |
struct IMAP *imap = data->req.protop; |
| 731 |
char *mailbox; |
| 732 |
|
| 733 |
/* Check we have a mailbox */ |
| 734 |
if(!imap->mailbox) { |
| 735 |
failf(data, "Cannot APPEND without a mailbox."); |
| 736 |
return CURLE_URL_MALFORMAT; |
| 737 |
} |
| 738 |
|
| 739 |
/* Prepare the mime data if some. */ |
| 740 |
if(data->set.mimepost.kind != MIMEKIND_NONE) { |
| 741 |
/* Use the whole structure as data. */ |
| 742 |
data->set.mimepost.flags &= ~MIME_BODY_ONLY; |
| 743 |
|
| 744 |
/* Add external headers and mime version. */ |
| 745 |
curl_mime_headers(&data->set.mimepost, data->set.headers, 0); |
| 746 |
result = Curl_mime_prepare_headers(&data->set.mimepost, NULL, |
| 747 |
NULL, MIMESTRATEGY_MAIL); |
| 748 |
|
| 749 |
if(!result) |
| 750 |
if(!Curl_checkheaders(conn, "Mime-Version")) |
| 751 |
result = Curl_mime_add_header(&data->set.mimepost.curlheaders, |
| 752 |
"Mime-Version: 1.0"); |
| 753 |
|
| 754 |
/* Make sure we will read the entire mime structure. */ |
| 755 |
if(!result) |
| 756 |
result = Curl_mime_rewind(&data->set.mimepost); |
| 757 |
|
| 758 |
if(result) |
| 759 |
return result; |
| 760 |
|
| 761 |
data->state.infilesize = Curl_mime_size(&data->set.mimepost); |
| 762 |
|
| 763 |
/* Read from mime structure. */ |
| 764 |
data->state.fread_func = (curl_read_callback) Curl_mime_read; |
| 765 |
data->state.in = (void *) &data->set.mimepost; |
| 766 |
} |
| 767 |
|
| 768 |
/* Check we know the size of the upload */ |
| 769 |
if(data->state.infilesize < 0) { |
| 770 |
failf(data, "Cannot APPEND with unknown input file size\n"); |
| 771 |
return CURLE_UPLOAD_FAILED; |
| 772 |
} |
| 773 |
|
| 774 |
/* Make sure the mailbox is in the correct atom format */ |
| 775 |
mailbox = imap_atom(imap->mailbox, false); |
| 776 |
if(!mailbox) |
| 777 |
return CURLE_OUT_OF_MEMORY; |
| 778 |
|
| 779 |
/* Send the APPEND command */ |
| 780 |
result = imap_sendf(conn, "APPEND %s (\\Seen) {%" CURL_FORMAT_CURL_OFF_T "}", |
| 781 |
mailbox, data->state.infilesize); |
| 782 |
|
| 783 |
free(mailbox); |
| 784 |
|
| 785 |
if(!result) |
| 786 |
state(conn, IMAP_APPEND); |
| 787 |
|
| 788 |
return result; |
| 789 |
} |
| 790 |
|
| 791 |
/*********************************************************************** |
| 792 |
* |
| 793 |
* imap_perform_search() |
| 794 |
* |
| 795 |
* Sends a SEARCH command. |
| 796 |
*/ |
| 797 |
static CURLcode imap_perform_search(struct connectdata *conn) |
| 798 |
{ |
| 799 |
CURLcode result = CURLE_OK; |
| 800 |
struct IMAP *imap = conn->data->req.protop; |
| 801 |
|
| 802 |
/* Check we have a query string */ |
| 803 |
if(!imap->query) { |
| 804 |
failf(conn->data, "Cannot SEARCH without a query string."); |
| 805 |
return CURLE_URL_MALFORMAT; |
| 806 |
} |
| 807 |
|
| 808 |
/* Send the SEARCH command */ |
| 809 |
result = imap_sendf(conn, "SEARCH %s", imap->query); |
| 810 |
|
| 811 |
if(!result) |
| 812 |
state(conn, IMAP_SEARCH); |
| 813 |
|
| 814 |
return result; |
| 815 |
} |
| 816 |
|
| 817 |
/*********************************************************************** |
| 818 |
* |
| 819 |
* imap_perform_logout() |
| 820 |
* |
| 821 |
* Performs the logout action prior to sclose() being called. |
| 822 |
*/ |
| 823 |
static CURLcode imap_perform_logout(struct connectdata *conn) |
| 824 |
{ |
| 825 |
/* Send the LOGOUT command */ |
| 826 |
CURLcode result = imap_sendf(conn, "LOGOUT"); |
| 827 |
|
| 828 |
if(!result) |
| 829 |
state(conn, IMAP_LOGOUT); |
| 830 |
|
| 831 |
return result; |
| 832 |
} |
| 833 |
|
| 834 |
/* For the initial server greeting */ |
| 835 |
static CURLcode imap_state_servergreet_resp(struct connectdata *conn, |
| 836 |
int imapcode, |
| 837 |
imapstate instate) |
| 838 |
{ |
| 839 |
struct Curl_easy *data = conn->data; |
| 840 |
(void)instate; /* no use for this yet */ |
| 841 |
|
| 842 |
if(imapcode == IMAP_RESP_PREAUTH) { |
| 843 |
/* PREAUTH */ |
| 844 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 845 |
imapc->preauth = TRUE; |
| 846 |
infof(data, "PREAUTH connection, already authenticated!\n"); |
| 847 |
} |
| 848 |
else if(imapcode != IMAP_RESP_OK) { |
| 849 |
failf(data, "Got unexpected imap-server response"); |
| 850 |
return CURLE_WEIRD_SERVER_REPLY; |
| 851 |
} |
| 852 |
|
| 853 |
return imap_perform_capability(conn); |
| 854 |
} |
| 855 |
|
| 856 |
/* For CAPABILITY responses */ |
| 857 |
static CURLcode imap_state_capability_resp(struct connectdata *conn, |
| 858 |
int imapcode, |
| 859 |
imapstate instate) |
| 860 |
{ |
| 861 |
CURLcode result = CURLE_OK; |
| 862 |
struct Curl_easy *data = conn->data; |
| 863 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 864 |
const char *line = data->state.buffer; |
| 865 |
|
| 866 |
(void)instate; /* no use for this yet */ |
| 867 |
|
| 868 |
/* Do we have a untagged response? */ |
| 869 |
if(imapcode == '*') { |
| 870 |
line += 2; |
| 871 |
|
| 872 |
/* Loop through the data line */ |
| 873 |
for(;;) { |
| 874 |
size_t wordlen; |
| 875 |
while(*line && |
| 876 |
(*line == ' ' || *line == '\t' || |
| 877 |
*line == '\r' || *line == '\n')) { |
| 878 |
|
| 879 |
line++; |
| 880 |
} |
| 881 |
|
| 882 |
if(!*line) |
| 883 |
break; |
| 884 |
|
| 885 |
/* Extract the word */ |
| 886 |
for(wordlen = 0; line[wordlen] && line[wordlen] != ' ' && |
| 887 |
line[wordlen] != '\t' && line[wordlen] != '\r' && |
| 888 |
line[wordlen] != '\n';) |
| 889 |
wordlen++; |
| 890 |
|
| 891 |
/* Does the server support the STARTTLS capability? */ |
| 892 |
if(wordlen == 8 && !memcmp(line, "STARTTLS", 8)) |
| 893 |
imapc->tls_supported = TRUE; |
| 894 |
|
| 895 |
/* Has the server explicitly disabled clear text authentication? */ |
| 896 |
else if(wordlen == 13 && !memcmp(line, "LOGINDISABLED", 13)) |
| 897 |
imapc->login_disabled = TRUE; |
| 898 |
|
| 899 |
/* Does the server support the SASL-IR capability? */ |
| 900 |
else if(wordlen == 7 && !memcmp(line, "SASL-IR", 7)) |
| 901 |
imapc->ir_supported = TRUE; |
| 902 |
|
| 903 |
/* Do we have a SASL based authentication mechanism? */ |
| 904 |
else if(wordlen > 5 && !memcmp(line, "AUTH=", 5)) { |
| 905 |
size_t llen; |
| 906 |
unsigned int mechbit; |
| 907 |
|
| 908 |
line += 5; |
| 909 |
wordlen -= 5; |
| 910 |
|
| 911 |
/* Test the word for a matching authentication mechanism */ |
| 912 |
mechbit = Curl_sasl_decode_mech(line, wordlen, &llen); |
| 913 |
if(mechbit && llen == wordlen) |
| 914 |
imapc->sasl.authmechs |= mechbit; |
| 915 |
} |
| 916 |
|
| 917 |
line += wordlen; |
| 918 |
} |
| 919 |
} |
| 920 |
else if(imapcode == IMAP_RESP_OK) { |
| 921 |
if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) { |
| 922 |
/* We don't have a SSL/TLS connection yet, but SSL is requested */ |
| 923 |
if(imapc->tls_supported) |
| 924 |
/* Switch to TLS connection now */ |
| 925 |
result = imap_perform_starttls(conn); |
| 926 |
else if(data->set.use_ssl == CURLUSESSL_TRY) |
| 927 |
/* Fallback and carry on with authentication */ |
| 928 |
result = imap_perform_authentication(conn); |
| 929 |
else { |
| 930 |
failf(data, "STARTTLS not supported."); |
| 931 |
result = CURLE_USE_SSL_FAILED; |
| 932 |
} |
| 933 |
} |
| 934 |
else |
| 935 |
result = imap_perform_authentication(conn); |
| 936 |
} |
| 937 |
else |
| 938 |
result = imap_perform_authentication(conn); |
| 939 |
|
| 940 |
return result; |
| 941 |
} |
| 942 |
|
| 943 |
/* For STARTTLS responses */ |
| 944 |
static CURLcode imap_state_starttls_resp(struct connectdata *conn, |
| 945 |
int imapcode, |
| 946 |
imapstate instate) |
| 947 |
{ |
| 948 |
CURLcode result = CURLE_OK; |
| 949 |
struct Curl_easy *data = conn->data; |
| 950 |
|
| 951 |
(void)instate; /* no use for this yet */ |
| 952 |
|
| 953 |
if(imapcode != IMAP_RESP_OK) { |
| 954 |
if(data->set.use_ssl != CURLUSESSL_TRY) { |
| 955 |
failf(data, "STARTTLS denied"); |
| 956 |
result = CURLE_USE_SSL_FAILED; |
| 957 |
} |
| 958 |
else |
| 959 |
result = imap_perform_authentication(conn); |
| 960 |
} |
| 961 |
else |
| 962 |
result = imap_perform_upgrade_tls(conn); |
| 963 |
|
| 964 |
return result; |
| 965 |
} |
| 966 |
|
| 967 |
/* For SASL authentication responses */ |
| 968 |
static CURLcode imap_state_auth_resp(struct connectdata *conn, |
| 969 |
int imapcode, |
| 970 |
imapstate instate) |
| 971 |
{ |
| 972 |
CURLcode result = CURLE_OK; |
| 973 |
struct Curl_easy *data = conn->data; |
| 974 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 975 |
saslprogress progress; |
| 976 |
|
| 977 |
(void)instate; /* no use for this yet */ |
| 978 |
|
| 979 |
result = Curl_sasl_continue(&imapc->sasl, conn, imapcode, &progress); |
| 980 |
if(!result) |
| 981 |
switch(progress) { |
| 982 |
case SASL_DONE: |
| 983 |
state(conn, IMAP_STOP); /* Authenticated */ |
| 984 |
break; |
| 985 |
case SASL_IDLE: /* No mechanism left after cancellation */ |
| 986 |
if((!imapc->login_disabled) && (imapc->preftype & IMAP_TYPE_CLEARTEXT)) |
| 987 |
/* Perform clear text authentication */ |
| 988 |
result = imap_perform_login(conn); |
| 989 |
else { |
| 990 |
failf(data, "Authentication cancelled"); |
| 991 |
result = CURLE_LOGIN_DENIED; |
| 992 |
} |
| 993 |
break; |
| 994 |
default: |
| 995 |
break; |
| 996 |
} |
| 997 |
|
| 998 |
return result; |
| 999 |
} |
| 1000 |
|
| 1001 |
/* For LOGIN responses */ |
| 1002 |
static CURLcode imap_state_login_resp(struct connectdata *conn, |
| 1003 |
int imapcode, |
| 1004 |
imapstate instate) |
| 1005 |
{ |
| 1006 |
CURLcode result = CURLE_OK; |
| 1007 |
struct Curl_easy *data = conn->data; |
| 1008 |
|
| 1009 |
(void)instate; /* no use for this yet */ |
| 1010 |
|
| 1011 |
if(imapcode != IMAP_RESP_OK) { |
| 1012 |
failf(data, "Access denied. %c", imapcode); |
| 1013 |
result = CURLE_LOGIN_DENIED; |
| 1014 |
} |
| 1015 |
else |
| 1016 |
/* End of connect phase */ |
| 1017 |
state(conn, IMAP_STOP); |
| 1018 |
|
| 1019 |
return result; |
| 1020 |
} |
| 1021 |
|
| 1022 |
/* For LIST and SEARCH responses */ |
| 1023 |
static CURLcode imap_state_listsearch_resp(struct connectdata *conn, |
| 1024 |
int imapcode, |
| 1025 |
imapstate instate) |
| 1026 |
{ |
| 1027 |
CURLcode result = CURLE_OK; |
| 1028 |
char *line = conn->data->state.buffer; |
| 1029 |
size_t len = strlen(line); |
| 1030 |
|
| 1031 |
(void)instate; /* No use for this yet */ |
| 1032 |
|
| 1033 |
if(imapcode == '*') { |
| 1034 |
/* Temporarily add the LF character back and send as body to the client */ |
| 1035 |
line[len] = '\n'; |
| 1036 |
result = Curl_client_write(conn, CLIENTWRITE_BODY, line, len + 1); |
| 1037 |
line[len] = '\0'; |
| 1038 |
} |
| 1039 |
else if(imapcode != IMAP_RESP_OK) |
| 1040 |
result = CURLE_QUOTE_ERROR; |
| 1041 |
else |
| 1042 |
/* End of DO phase */ |
| 1043 |
state(conn, IMAP_STOP); |
| 1044 |
|
| 1045 |
return result; |
| 1046 |
} |
| 1047 |
|
| 1048 |
/* For SELECT responses */ |
| 1049 |
static CURLcode imap_state_select_resp(struct connectdata *conn, int imapcode, |
| 1050 |
imapstate instate) |
| 1051 |
{ |
| 1052 |
CURLcode result = CURLE_OK; |
| 1053 |
struct Curl_easy *data = conn->data; |
| 1054 |
struct IMAP *imap = conn->data->req.protop; |
| 1055 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1056 |
const char *line = data->state.buffer; |
| 1057 |
|
| 1058 |
(void)instate; /* no use for this yet */ |
| 1059 |
|
| 1060 |
if(imapcode == '*') { |
| 1061 |
/* See if this is an UIDVALIDITY response */ |
| 1062 |
char tmp[20]; |
| 1063 |
if(sscanf(line + 2, "OK [UIDVALIDITY %19[0123456789]]", tmp) == 1) { |
| 1064 |
Curl_safefree(imapc->mailbox_uidvalidity); |
| 1065 |
imapc->mailbox_uidvalidity = strdup(tmp); |
| 1066 |
} |
| 1067 |
} |
| 1068 |
else if(imapcode == IMAP_RESP_OK) { |
| 1069 |
/* Check if the UIDVALIDITY has been specified and matches */ |
| 1070 |
if(imap->uidvalidity && imapc->mailbox_uidvalidity && |
| 1071 |
!strcasecompare(imap->uidvalidity, imapc->mailbox_uidvalidity)) { |
| 1072 |
failf(conn->data, "Mailbox UIDVALIDITY has changed"); |
| 1073 |
result = CURLE_REMOTE_FILE_NOT_FOUND; |
| 1074 |
} |
| 1075 |
else { |
| 1076 |
/* Note the currently opened mailbox on this connection */ |
| 1077 |
imapc->mailbox = strdup(imap->mailbox); |
| 1078 |
|
| 1079 |
if(imap->custom) |
| 1080 |
result = imap_perform_list(conn); |
| 1081 |
else if(imap->query) |
| 1082 |
result = imap_perform_search(conn); |
| 1083 |
else |
| 1084 |
result = imap_perform_fetch(conn); |
| 1085 |
} |
| 1086 |
} |
| 1087 |
else { |
| 1088 |
failf(data, "Select failed"); |
| 1089 |
result = CURLE_LOGIN_DENIED; |
| 1090 |
} |
| 1091 |
|
| 1092 |
return result; |
| 1093 |
} |
| 1094 |
|
| 1095 |
/* For the (first line of the) FETCH responses */ |
| 1096 |
static CURLcode imap_state_fetch_resp(struct connectdata *conn, int imapcode, |
| 1097 |
imapstate instate) |
| 1098 |
{ |
| 1099 |
CURLcode result = CURLE_OK; |
| 1100 |
struct Curl_easy *data = conn->data; |
| 1101 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1102 |
struct pingpong *pp = &imapc->pp; |
| 1103 |
const char *ptr = data->state.buffer; |
| 1104 |
bool parsed = FALSE; |
| 1105 |
curl_off_t size = 0; |
| 1106 |
|
| 1107 |
(void)instate; /* no use for this yet */ |
| 1108 |
|
| 1109 |
if(imapcode != '*') { |
| 1110 |
Curl_pgrsSetDownloadSize(data, -1); |
| 1111 |
state(conn, IMAP_STOP); |
| 1112 |
return CURLE_REMOTE_FILE_NOT_FOUND; |
| 1113 |
} |
| 1114 |
|
| 1115 |
/* Something like this is received "* 1 FETCH (BODY[TEXT] {2021}\r" so parse |
| 1116 |
the continuation data contained within the curly brackets */ |
| 1117 |
while(*ptr && (*ptr != '{')) |
| 1118 |
ptr++; |
| 1119 |
|
| 1120 |
if(*ptr == '{') { |
| 1121 |
char *endptr; |
| 1122 |
if(!curlx_strtoofft(ptr + 1, &endptr, 10, &size)) { |
| 1123 |
if(endptr - ptr > 1 && endptr[0] == '}' && |
| 1124 |
endptr[1] == '\r' && endptr[2] == '\0') |
| 1125 |
parsed = TRUE; |
| 1126 |
} |
| 1127 |
} |
| 1128 |
|
| 1129 |
if(parsed) { |
| 1130 |
infof(data, "Found %" CURL_FORMAT_CURL_OFF_T " bytes to download\n", |
| 1131 |
size); |
| 1132 |
Curl_pgrsSetDownloadSize(data, size); |
| 1133 |
|
| 1134 |
if(pp->cache) { |
| 1135 |
/* At this point there is a bunch of data in the header "cache" that is |
| 1136 |
actually body content, send it as body and then skip it. Do note |
| 1137 |
that there may even be additional "headers" after the body. */ |
| 1138 |
size_t chunk = pp->cache_size; |
| 1139 |
|
| 1140 |
if(chunk > (size_t)size) |
| 1141 |
/* The conversion from curl_off_t to size_t is always fine here */ |
| 1142 |
chunk = (size_t)size; |
| 1143 |
|
| 1144 |
if(!chunk) { |
| 1145 |
/* no size, we're done with the data */ |
| 1146 |
state(conn, IMAP_STOP); |
| 1147 |
return CURLE_OK; |
| 1148 |
} |
| 1149 |
result = Curl_client_write(conn, CLIENTWRITE_BODY, pp->cache, chunk); |
| 1150 |
if(result) |
| 1151 |
return result; |
| 1152 |
|
| 1153 |
data->req.bytecount += chunk; |
| 1154 |
|
| 1155 |
infof(data, "Written %zu bytes, %" CURL_FORMAT_CURL_OFF_TU |
| 1156 |
" bytes are left for transfer\n", chunk, size - chunk); |
| 1157 |
|
| 1158 |
/* Have we used the entire cache or just part of it?*/ |
| 1159 |
if(pp->cache_size > chunk) { |
| 1160 |
/* Only part of it so shrink the cache to fit the trailing data */ |
| 1161 |
memmove(pp->cache, pp->cache + chunk, pp->cache_size - chunk); |
| 1162 |
pp->cache_size -= chunk; |
| 1163 |
} |
| 1164 |
else { |
| 1165 |
/* Free the cache */ |
| 1166 |
Curl_safefree(pp->cache); |
| 1167 |
|
| 1168 |
/* Reset the cache size */ |
| 1169 |
pp->cache_size = 0; |
| 1170 |
} |
| 1171 |
} |
| 1172 |
|
| 1173 |
if(data->req.bytecount == size) |
| 1174 |
/* The entire data is already transferred! */ |
| 1175 |
Curl_setup_transfer(data, -1, -1, FALSE, -1); |
| 1176 |
else { |
| 1177 |
/* IMAP download */ |
| 1178 |
data->req.maxdownload = size; |
| 1179 |
Curl_setup_transfer(data, FIRSTSOCKET, size, FALSE, -1); |
| 1180 |
} |
| 1181 |
} |
| 1182 |
else { |
| 1183 |
/* We don't know how to parse this line */ |
| 1184 |
failf(pp->conn->data, "Failed to parse FETCH response."); |
| 1185 |
result = CURLE_WEIRD_SERVER_REPLY; |
| 1186 |
} |
| 1187 |
|
| 1188 |
/* End of DO phase */ |
| 1189 |
state(conn, IMAP_STOP); |
| 1190 |
|
| 1191 |
return result; |
| 1192 |
} |
| 1193 |
|
| 1194 |
/* For final FETCH responses performed after the download */ |
| 1195 |
static CURLcode imap_state_fetch_final_resp(struct connectdata *conn, |
| 1196 |
int imapcode, |
| 1197 |
imapstate instate) |
| 1198 |
{ |
| 1199 |
CURLcode result = CURLE_OK; |
| 1200 |
|
| 1201 |
(void)instate; /* No use for this yet */ |
| 1202 |
|
| 1203 |
if(imapcode != IMAP_RESP_OK) |
| 1204 |
result = CURLE_WEIRD_SERVER_REPLY; |
| 1205 |
else |
| 1206 |
/* End of DONE phase */ |
| 1207 |
state(conn, IMAP_STOP); |
| 1208 |
|
| 1209 |
return result; |
| 1210 |
} |
| 1211 |
|
| 1212 |
/* For APPEND responses */ |
| 1213 |
static CURLcode imap_state_append_resp(struct connectdata *conn, int imapcode, |
| 1214 |
imapstate instate) |
| 1215 |
{ |
| 1216 |
CURLcode result = CURLE_OK; |
| 1217 |
struct Curl_easy *data = conn->data; |
| 1218 |
|
| 1219 |
(void)instate; /* No use for this yet */ |
| 1220 |
|
| 1221 |
if(imapcode != '+') { |
| 1222 |
result = CURLE_UPLOAD_FAILED; |
| 1223 |
} |
| 1224 |
else { |
| 1225 |
/* Set the progress upload size */ |
| 1226 |
Curl_pgrsSetUploadSize(data, data->state.infilesize); |
| 1227 |
|
| 1228 |
/* IMAP upload */ |
| 1229 |
Curl_setup_transfer(data, -1, -1, FALSE, FIRSTSOCKET); |
| 1230 |
|
| 1231 |
/* End of DO phase */ |
| 1232 |
state(conn, IMAP_STOP); |
| 1233 |
} |
| 1234 |
|
| 1235 |
return result; |
| 1236 |
} |
| 1237 |
|
| 1238 |
/* For final APPEND responses performed after the upload */ |
| 1239 |
static CURLcode imap_state_append_final_resp(struct connectdata *conn, |
| 1240 |
int imapcode, |
| 1241 |
imapstate instate) |
| 1242 |
{ |
| 1243 |
CURLcode result = CURLE_OK; |
| 1244 |
|
| 1245 |
(void)instate; /* No use for this yet */ |
| 1246 |
|
| 1247 |
if(imapcode != IMAP_RESP_OK) |
| 1248 |
result = CURLE_UPLOAD_FAILED; |
| 1249 |
else |
| 1250 |
/* End of DONE phase */ |
| 1251 |
state(conn, IMAP_STOP); |
| 1252 |
|
| 1253 |
return result; |
| 1254 |
} |
| 1255 |
|
| 1256 |
static CURLcode imap_statemach_act(struct connectdata *conn) |
| 1257 |
{ |
| 1258 |
CURLcode result = CURLE_OK; |
| 1259 |
curl_socket_t sock = conn->sock[FIRSTSOCKET]; |
| 1260 |
int imapcode; |
| 1261 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1262 |
struct pingpong *pp = &imapc->pp; |
| 1263 |
size_t nread = 0; |
| 1264 |
|
| 1265 |
/* Busy upgrading the connection; right now all I/O is SSL/TLS, not IMAP */ |
| 1266 |
if(imapc->state == IMAP_UPGRADETLS) |
| 1267 |
return imap_perform_upgrade_tls(conn); |
| 1268 |
|
| 1269 |
/* Flush any data that needs to be sent */ |
| 1270 |
if(pp->sendleft) |
| 1271 |
return Curl_pp_flushsend(pp); |
| 1272 |
|
| 1273 |
do { |
| 1274 |
/* Read the response from the server */ |
| 1275 |
result = Curl_pp_readresp(sock, pp, &imapcode, &nread); |
| 1276 |
if(result) |
| 1277 |
return result; |
| 1278 |
|
| 1279 |
/* Was there an error parsing the response line? */ |
| 1280 |
if(imapcode == -1) |
| 1281 |
return CURLE_WEIRD_SERVER_REPLY; |
| 1282 |
|
| 1283 |
if(!imapcode) |
| 1284 |
break; |
| 1285 |
|
| 1286 |
/* We have now received a full IMAP server response */ |
| 1287 |
switch(imapc->state) { |
| 1288 |
case IMAP_SERVERGREET: |
| 1289 |
result = imap_state_servergreet_resp(conn, imapcode, imapc->state); |
| 1290 |
break; |
| 1291 |
|
| 1292 |
case IMAP_CAPABILITY: |
| 1293 |
result = imap_state_capability_resp(conn, imapcode, imapc->state); |
| 1294 |
break; |
| 1295 |
|
| 1296 |
case IMAP_STARTTLS: |
| 1297 |
result = imap_state_starttls_resp(conn, imapcode, imapc->state); |
| 1298 |
break; |
| 1299 |
|
| 1300 |
case IMAP_AUTHENTICATE: |
| 1301 |
result = imap_state_auth_resp(conn, imapcode, imapc->state); |
| 1302 |
break; |
| 1303 |
|
| 1304 |
case IMAP_LOGIN: |
| 1305 |
result = imap_state_login_resp(conn, imapcode, imapc->state); |
| 1306 |
break; |
| 1307 |
|
| 1308 |
case IMAP_LIST: |
| 1309 |
case IMAP_SEARCH: |
| 1310 |
result = imap_state_listsearch_resp(conn, imapcode, imapc->state); |
| 1311 |
break; |
| 1312 |
|
| 1313 |
case IMAP_SELECT: |
| 1314 |
result = imap_state_select_resp(conn, imapcode, imapc->state); |
| 1315 |
break; |
| 1316 |
|
| 1317 |
case IMAP_FETCH: |
| 1318 |
result = imap_state_fetch_resp(conn, imapcode, imapc->state); |
| 1319 |
break; |
| 1320 |
|
| 1321 |
case IMAP_FETCH_FINAL: |
| 1322 |
result = imap_state_fetch_final_resp(conn, imapcode, imapc->state); |
| 1323 |
break; |
| 1324 |
|
| 1325 |
case IMAP_APPEND: |
| 1326 |
result = imap_state_append_resp(conn, imapcode, imapc->state); |
| 1327 |
break; |
| 1328 |
|
| 1329 |
case IMAP_APPEND_FINAL: |
| 1330 |
result = imap_state_append_final_resp(conn, imapcode, imapc->state); |
| 1331 |
break; |
| 1332 |
|
| 1333 |
case IMAP_LOGOUT: |
| 1334 |
/* fallthrough, just stop! */ |
| 1335 |
default: |
| 1336 |
/* internal error */ |
| 1337 |
state(conn, IMAP_STOP); |
| 1338 |
break; |
| 1339 |
} |
| 1340 |
} while(!result && imapc->state != IMAP_STOP && Curl_pp_moredata(pp)); |
| 1341 |
|
| 1342 |
return result; |
| 1343 |
} |
| 1344 |
|
| 1345 |
/* Called repeatedly until done from multi.c */ |
| 1346 |
static CURLcode imap_multi_statemach(struct connectdata *conn, bool *done) |
| 1347 |
{ |
| 1348 |
CURLcode result = CURLE_OK; |
| 1349 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1350 |
|
| 1351 |
if((conn->handler->flags & PROTOPT_SSL) && !imapc->ssldone) { |
| 1352 |
result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &imapc->ssldone); |
| 1353 |
if(result || !imapc->ssldone) |
| 1354 |
return result; |
| 1355 |
} |
| 1356 |
|
| 1357 |
result = Curl_pp_statemach(&imapc->pp, FALSE, FALSE); |
| 1358 |
*done = (imapc->state == IMAP_STOP) ? TRUE : FALSE; |
| 1359 |
|
| 1360 |
return result; |
| 1361 |
} |
| 1362 |
|
| 1363 |
static CURLcode imap_block_statemach(struct connectdata *conn, |
| 1364 |
bool disconnecting) |
| 1365 |
{ |
| 1366 |
CURLcode result = CURLE_OK; |
| 1367 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1368 |
|
| 1369 |
while(imapc->state != IMAP_STOP && !result) |
| 1370 |
result = Curl_pp_statemach(&imapc->pp, TRUE, disconnecting); |
| 1371 |
|
| 1372 |
return result; |
| 1373 |
} |
| 1374 |
|
| 1375 |
/* Allocate and initialize the struct IMAP for the current Curl_easy if |
| 1376 |
required */ |
| 1377 |
static CURLcode imap_init(struct connectdata *conn) |
| 1378 |
{ |
| 1379 |
CURLcode result = CURLE_OK; |
| 1380 |
struct Curl_easy *data = conn->data; |
| 1381 |
struct IMAP *imap; |
| 1382 |
|
| 1383 |
imap = data->req.protop = calloc(sizeof(struct IMAP), 1); |
| 1384 |
if(!imap) |
| 1385 |
result = CURLE_OUT_OF_MEMORY; |
| 1386 |
|
| 1387 |
return result; |
| 1388 |
} |
| 1389 |
|
| 1390 |
/* For the IMAP "protocol connect" and "doing" phases only */ |
| 1391 |
static int imap_getsock(struct connectdata *conn, curl_socket_t *socks) |
| 1392 |
{ |
| 1393 |
return Curl_pp_getsock(&conn->proto.imapc.pp, socks); |
| 1394 |
} |
| 1395 |
|
| 1396 |
/*********************************************************************** |
| 1397 |
* |
| 1398 |
* imap_connect() |
| 1399 |
* |
| 1400 |
* This function should do everything that is to be considered a part of the |
| 1401 |
* connection phase. |
| 1402 |
* |
| 1403 |
* The variable 'done' points to will be TRUE if the protocol-layer connect |
| 1404 |
* phase is done when this function returns, or FALSE if not. |
| 1405 |
*/ |
| 1406 |
static CURLcode imap_connect(struct connectdata *conn, bool *done) |
| 1407 |
{ |
| 1408 |
CURLcode result = CURLE_OK; |
| 1409 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1410 |
struct pingpong *pp = &imapc->pp; |
| 1411 |
|
| 1412 |
*done = FALSE; /* default to not done yet */ |
| 1413 |
|
| 1414 |
/* We always support persistent connections in IMAP */ |
| 1415 |
connkeep(conn, "IMAP default"); |
| 1416 |
|
| 1417 |
/* Set the default response time-out */ |
| 1418 |
pp->response_time = RESP_TIMEOUT; |
| 1419 |
pp->statemach_act = imap_statemach_act; |
| 1420 |
pp->endofresp = imap_endofresp; |
| 1421 |
pp->conn = conn; |
| 1422 |
|
| 1423 |
/* Set the default preferred authentication type and mechanism */ |
| 1424 |
imapc->preftype = IMAP_TYPE_ANY; |
| 1425 |
Curl_sasl_init(&imapc->sasl, &saslimap); |
| 1426 |
|
| 1427 |
/* Initialise the pingpong layer */ |
| 1428 |
Curl_pp_init(pp); |
| 1429 |
|
| 1430 |
/* Parse the URL options */ |
| 1431 |
result = imap_parse_url_options(conn); |
| 1432 |
if(result) |
| 1433 |
return result; |
| 1434 |
|
| 1435 |
/* Start off waiting for the server greeting response */ |
| 1436 |
state(conn, IMAP_SERVERGREET); |
| 1437 |
|
| 1438 |
/* Start off with an response id of '*' */ |
| 1439 |
strcpy(imapc->resptag, "*"); |
| 1440 |
|
| 1441 |
result = imap_multi_statemach(conn, done); |
| 1442 |
|
| 1443 |
return result; |
| 1444 |
} |
| 1445 |
|
| 1446 |
/*********************************************************************** |
| 1447 |
* |
| 1448 |
* imap_done() |
| 1449 |
* |
| 1450 |
* The DONE function. This does what needs to be done after a single DO has |
| 1451 |
* performed. |
| 1452 |
* |
| 1453 |
* Input argument is already checked for validity. |
| 1454 |
*/ |
| 1455 |
static CURLcode imap_done(struct connectdata *conn, CURLcode status, |
| 1456 |
bool premature) |
| 1457 |
{ |
| 1458 |
CURLcode result = CURLE_OK; |
| 1459 |
struct Curl_easy *data = conn->data; |
| 1460 |
struct IMAP *imap = data->req.protop; |
| 1461 |
|
| 1462 |
(void)premature; |
| 1463 |
|
| 1464 |
if(!imap) |
| 1465 |
return CURLE_OK; |
| 1466 |
|
| 1467 |
if(status) { |
| 1468 |
connclose(conn, "IMAP done with bad status"); /* marked for closure */ |
| 1469 |
result = status; /* use the already set error code */ |
| 1470 |
} |
| 1471 |
else if(!data->set.connect_only && !imap->custom && |
| 1472 |
(imap->uid || imap->mindex || data->set.upload || |
| 1473 |
data->set.mimepost.kind != MIMEKIND_NONE)) { |
| 1474 |
/* Handle responses after FETCH or APPEND transfer has finished */ |
| 1475 |
|
| 1476 |
if(!data->set.upload && data->set.mimepost.kind == MIMEKIND_NONE) |
| 1477 |
state(conn, IMAP_FETCH_FINAL); |
| 1478 |
else { |
| 1479 |
/* End the APPEND command first by sending an empty line */ |
| 1480 |
result = Curl_pp_sendf(&conn->proto.imapc.pp, "%s", ""); |
| 1481 |
if(!result) |
| 1482 |
state(conn, IMAP_APPEND_FINAL); |
| 1483 |
} |
| 1484 |
|
| 1485 |
/* Run the state-machine */ |
| 1486 |
if(!result) |
| 1487 |
result = imap_block_statemach(conn, FALSE); |
| 1488 |
} |
| 1489 |
|
| 1490 |
/* Cleanup our per-request based variables */ |
| 1491 |
Curl_safefree(imap->mailbox); |
| 1492 |
Curl_safefree(imap->uidvalidity); |
| 1493 |
Curl_safefree(imap->uid); |
| 1494 |
Curl_safefree(imap->mindex); |
| 1495 |
Curl_safefree(imap->section); |
| 1496 |
Curl_safefree(imap->partial); |
| 1497 |
Curl_safefree(imap->query); |
| 1498 |
Curl_safefree(imap->custom); |
| 1499 |
Curl_safefree(imap->custom_params); |
| 1500 |
|
| 1501 |
/* Clear the transfer mode for the next request */ |
| 1502 |
imap->transfer = FTPTRANSFER_BODY; |
| 1503 |
|
| 1504 |
return result; |
| 1505 |
} |
| 1506 |
|
| 1507 |
/*********************************************************************** |
| 1508 |
* |
| 1509 |
* imap_perform() |
| 1510 |
* |
| 1511 |
* This is the actual DO function for IMAP. Fetch or append a message, or do |
| 1512 |
* other things according to the options previously setup. |
| 1513 |
*/ |
| 1514 |
static CURLcode imap_perform(struct connectdata *conn, bool *connected, |
| 1515 |
bool *dophase_done) |
| 1516 |
{ |
| 1517 |
/* This is IMAP and no proxy */ |
| 1518 |
CURLcode result = CURLE_OK; |
| 1519 |
struct Curl_easy *data = conn->data; |
| 1520 |
struct IMAP *imap = data->req.protop; |
| 1521 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1522 |
bool selected = FALSE; |
| 1523 |
|
| 1524 |
DEBUGF(infof(conn->data, "DO phase starts\n")); |
| 1525 |
|
| 1526 |
if(conn->data->set.opt_no_body) { |
| 1527 |
/* Requested no body means no transfer */ |
| 1528 |
imap->transfer = FTPTRANSFER_INFO; |
| 1529 |
} |
| 1530 |
|
| 1531 |
*dophase_done = FALSE; /* not done yet */ |
| 1532 |
|
| 1533 |
/* Determine if the requested mailbox (with the same UIDVALIDITY if set) |
| 1534 |
has already been selected on this connection */ |
| 1535 |
if(imap->mailbox && imapc->mailbox && |
| 1536 |
strcasecompare(imap->mailbox, imapc->mailbox) && |
| 1537 |
(!imap->uidvalidity || !imapc->mailbox_uidvalidity || |
| 1538 |
strcasecompare(imap->uidvalidity, imapc->mailbox_uidvalidity))) |
| 1539 |
selected = TRUE; |
| 1540 |
|
| 1541 |
/* Start the first command in the DO phase */ |
| 1542 |
if(conn->data->set.upload || data->set.mimepost.kind != MIMEKIND_NONE) |
| 1543 |
/* APPEND can be executed directly */ |
| 1544 |
result = imap_perform_append(conn); |
| 1545 |
else if(imap->custom && (selected || !imap->mailbox)) |
| 1546 |
/* Custom command using the same mailbox or no mailbox */ |
| 1547 |
result = imap_perform_list(conn); |
| 1548 |
else if(!imap->custom && selected && (imap->uid || imap->mindex)) |
| 1549 |
/* FETCH from the same mailbox */ |
| 1550 |
result = imap_perform_fetch(conn); |
| 1551 |
else if(!imap->custom && selected && imap->query) |
| 1552 |
/* SEARCH the current mailbox */ |
| 1553 |
result = imap_perform_search(conn); |
| 1554 |
else if(imap->mailbox && !selected && |
| 1555 |
(imap->custom || imap->uid || imap->mindex || imap->query)) |
| 1556 |
/* SELECT the mailbox */ |
| 1557 |
result = imap_perform_select(conn); |
| 1558 |
else |
| 1559 |
/* LIST */ |
| 1560 |
result = imap_perform_list(conn); |
| 1561 |
|
| 1562 |
if(result) |
| 1563 |
return result; |
| 1564 |
|
| 1565 |
/* Run the state-machine */ |
| 1566 |
result = imap_multi_statemach(conn, dophase_done); |
| 1567 |
|
| 1568 |
*connected = conn->bits.tcpconnect[FIRSTSOCKET]; |
| 1569 |
|
| 1570 |
if(*dophase_done) |
| 1571 |
DEBUGF(infof(conn->data, "DO phase is complete\n")); |
| 1572 |
|
| 1573 |
return result; |
| 1574 |
} |
| 1575 |
|
| 1576 |
/*********************************************************************** |
| 1577 |
* |
| 1578 |
* imap_do() |
| 1579 |
* |
| 1580 |
* This function is registered as 'curl_do' function. It decodes the path |
| 1581 |
* parts etc as a wrapper to the actual DO function (imap_perform). |
| 1582 |
* |
| 1583 |
* The input argument is already checked for validity. |
| 1584 |
*/ |
| 1585 |
static CURLcode imap_do(struct connectdata *conn, bool *done) |
| 1586 |
{ |
| 1587 |
CURLcode result = CURLE_OK; |
| 1588 |
|
| 1589 |
*done = FALSE; /* default to false */ |
| 1590 |
|
| 1591 |
/* Parse the URL path */ |
| 1592 |
result = imap_parse_url_path(conn); |
| 1593 |
if(result) |
| 1594 |
return result; |
| 1595 |
|
| 1596 |
/* Parse the custom request */ |
| 1597 |
result = imap_parse_custom_request(conn); |
| 1598 |
if(result) |
| 1599 |
return result; |
| 1600 |
|
| 1601 |
result = imap_regular_transfer(conn, done); |
| 1602 |
|
| 1603 |
return result; |
| 1604 |
} |
| 1605 |
|
| 1606 |
/*********************************************************************** |
| 1607 |
* |
| 1608 |
* imap_disconnect() |
| 1609 |
* |
| 1610 |
* Disconnect from an IMAP server. Cleanup protocol-specific per-connection |
| 1611 |
* resources. BLOCKING. |
| 1612 |
*/ |
| 1613 |
static CURLcode imap_disconnect(struct connectdata *conn, bool dead_connection) |
| 1614 |
{ |
| 1615 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1616 |
|
| 1617 |
/* We cannot send quit unconditionally. If this connection is stale or |
| 1618 |
bad in any way, sending quit and waiting around here will make the |
| 1619 |
disconnect wait in vain and cause more problems than we need to. */ |
| 1620 |
|
| 1621 |
/* The IMAP session may or may not have been allocated/setup at this |
| 1622 |
point! */ |
| 1623 |
if(!dead_connection && imapc->pp.conn && imapc->pp.conn->bits.protoconnstart) |
| 1624 |
if(!imap_perform_logout(conn)) |
| 1625 |
(void)imap_block_statemach(conn, TRUE); /* ignore errors on LOGOUT */ |
| 1626 |
|
| 1627 |
/* Disconnect from the server */ |
| 1628 |
Curl_pp_disconnect(&imapc->pp); |
| 1629 |
|
| 1630 |
/* Cleanup the SASL module */ |
| 1631 |
Curl_sasl_cleanup(conn, imapc->sasl.authused); |
| 1632 |
|
| 1633 |
/* Cleanup our connection based variables */ |
| 1634 |
Curl_safefree(imapc->mailbox); |
| 1635 |
Curl_safefree(imapc->mailbox_uidvalidity); |
| 1636 |
|
| 1637 |
return CURLE_OK; |
| 1638 |
} |
| 1639 |
|
| 1640 |
/* Call this when the DO phase has completed */ |
| 1641 |
static CURLcode imap_dophase_done(struct connectdata *conn, bool connected) |
| 1642 |
{ |
| 1643 |
struct IMAP *imap = conn->data->req.protop; |
| 1644 |
|
| 1645 |
(void)connected; |
| 1646 |
|
| 1647 |
if(imap->transfer != FTPTRANSFER_BODY) |
| 1648 |
/* no data to transfer */ |
| 1649 |
Curl_setup_transfer(conn->data, -1, -1, FALSE, -1); |
| 1650 |
|
| 1651 |
return CURLE_OK; |
| 1652 |
} |
| 1653 |
|
| 1654 |
/* Called from multi.c while DOing */ |
| 1655 |
static CURLcode imap_doing(struct connectdata *conn, bool *dophase_done) |
| 1656 |
{ |
| 1657 |
CURLcode result = imap_multi_statemach(conn, dophase_done); |
| 1658 |
|
| 1659 |
if(result) |
| 1660 |
DEBUGF(infof(conn->data, "DO phase failed\n")); |
| 1661 |
else if(*dophase_done) { |
| 1662 |
result = imap_dophase_done(conn, FALSE /* not connected */); |
| 1663 |
|
| 1664 |
DEBUGF(infof(conn->data, "DO phase is complete\n")); |
| 1665 |
} |
| 1666 |
|
| 1667 |
return result; |
| 1668 |
} |
| 1669 |
|
| 1670 |
/*********************************************************************** |
| 1671 |
* |
| 1672 |
* imap_regular_transfer() |
| 1673 |
* |
| 1674 |
* The input argument is already checked for validity. |
| 1675 |
* |
| 1676 |
* Performs all commands done before a regular transfer between a local and a |
| 1677 |
* remote host. |
| 1678 |
*/ |
| 1679 |
static CURLcode imap_regular_transfer(struct connectdata *conn, |
| 1680 |
bool *dophase_done) |
| 1681 |
{ |
| 1682 |
CURLcode result = CURLE_OK; |
| 1683 |
bool connected = FALSE; |
| 1684 |
struct Curl_easy *data = conn->data; |
| 1685 |
|
| 1686 |
/* Make sure size is unknown at this point */ |
| 1687 |
data->req.size = -1; |
| 1688 |
|
| 1689 |
/* Set the progress data */ |
| 1690 |
Curl_pgrsSetUploadCounter(data, 0); |
| 1691 |
Curl_pgrsSetDownloadCounter(data, 0); |
| 1692 |
Curl_pgrsSetUploadSize(data, -1); |
| 1693 |
Curl_pgrsSetDownloadSize(data, -1); |
| 1694 |
|
| 1695 |
/* Carry out the perform */ |
| 1696 |
result = imap_perform(conn, &connected, dophase_done); |
| 1697 |
|
| 1698 |
/* Perform post DO phase operations if necessary */ |
| 1699 |
if(!result && *dophase_done) |
| 1700 |
result = imap_dophase_done(conn, connected); |
| 1701 |
|
| 1702 |
return result; |
| 1703 |
} |
| 1704 |
|
| 1705 |
static CURLcode imap_setup_connection(struct connectdata *conn) |
| 1706 |
{ |
| 1707 |
/* Initialise the IMAP layer */ |
| 1708 |
CURLcode result = imap_init(conn); |
| 1709 |
if(result) |
| 1710 |
return result; |
| 1711 |
|
| 1712 |
/* Clear the TLS upgraded flag */ |
| 1713 |
conn->tls_upgraded = FALSE; |
| 1714 |
|
| 1715 |
return CURLE_OK; |
| 1716 |
} |
| 1717 |
|
| 1718 |
/*********************************************************************** |
| 1719 |
* |
| 1720 |
* imap_sendf() |
| 1721 |
* |
| 1722 |
* Sends the formatted string as an IMAP command to the server. |
| 1723 |
* |
| 1724 |
* Designed to never block. |
| 1725 |
*/ |
| 1726 |
static CURLcode imap_sendf(struct connectdata *conn, const char *fmt, ...) |
| 1727 |
{ |
| 1728 |
CURLcode result = CURLE_OK; |
| 1729 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1730 |
char *taggedfmt; |
| 1731 |
va_list ap; |
| 1732 |
|
| 1733 |
DEBUGASSERT(fmt); |
| 1734 |
|
| 1735 |
/* Calculate the next command ID wrapping at 3 digits */ |
| 1736 |
imapc->cmdid = (imapc->cmdid + 1) % 1000; |
| 1737 |
|
| 1738 |
/* Calculate the tag based on the connection ID and command ID */ |
| 1739 |
msnprintf(imapc->resptag, sizeof(imapc->resptag), "%c%03d", |
| 1740 |
'A' + curlx_sltosi(conn->connection_id % 26), imapc->cmdid); |
| 1741 |
|
| 1742 |
/* Prefix the format with the tag */ |
| 1743 |
taggedfmt = aprintf("%s %s", imapc->resptag, fmt); |
| 1744 |
if(!taggedfmt) |
| 1745 |
return CURLE_OUT_OF_MEMORY; |
| 1746 |
|
| 1747 |
/* Send the data with the tag */ |
| 1748 |
va_start(ap, fmt); |
| 1749 |
result = Curl_pp_vsendf(&imapc->pp, taggedfmt, ap); |
| 1750 |
va_end(ap); |
| 1751 |
|
| 1752 |
free(taggedfmt); |
| 1753 |
|
| 1754 |
return result; |
| 1755 |
} |
| 1756 |
|
| 1757 |
/*********************************************************************** |
| 1758 |
* |
| 1759 |
* imap_atom() |
| 1760 |
* |
| 1761 |
* Checks the input string for characters that need escaping and returns an |
| 1762 |
* atom ready for sending to the server. |
| 1763 |
* |
| 1764 |
* The returned string needs to be freed. |
| 1765 |
* |
| 1766 |
*/ |
| 1767 |
static char *imap_atom(const char *str, bool escape_only) |
| 1768 |
{ |
| 1769 |
/* !checksrc! disable PARENBRACE 1 */ |
| 1770 |
const char atom_specials[] = "(){ %*]"; |
| 1771 |
const char *p1; |
| 1772 |
char *p2; |
| 1773 |
size_t backsp_count = 0; |
| 1774 |
size_t quote_count = 0; |
| 1775 |
bool others_exists = FALSE; |
| 1776 |
size_t newlen = 0; |
| 1777 |
char *newstr = NULL; |
| 1778 |
|
| 1779 |
if(!str) |
| 1780 |
return NULL; |
| 1781 |
|
| 1782 |
/* Look for "atom-specials", counting the backslash and quote characters as |
| 1783 |
these will need escaping */ |
| 1784 |
p1 = str; |
| 1785 |
while(*p1) { |
| 1786 |
if(*p1 == '\\') |
| 1787 |
backsp_count++; |
| 1788 |
else if(*p1 == '"') |
| 1789 |
quote_count++; |
| 1790 |
else if(!escape_only) { |
| 1791 |
const char *p3 = atom_specials; |
| 1792 |
|
| 1793 |
while(*p3 && !others_exists) { |
| 1794 |
if(*p1 == *p3) |
| 1795 |
others_exists = TRUE; |
| 1796 |
|
| 1797 |
p3++; |
| 1798 |
} |
| 1799 |
} |
| 1800 |
|
| 1801 |
p1++; |
| 1802 |
} |
| 1803 |
|
| 1804 |
/* Does the input contain any "atom-special" characters? */ |
| 1805 |
if(!backsp_count && !quote_count && !others_exists) |
| 1806 |
return strdup(str); |
| 1807 |
|
| 1808 |
/* Calculate the new string length */ |
| 1809 |
newlen = strlen(str) + backsp_count + quote_count + (escape_only ? 0 : 2); |
| 1810 |
|
| 1811 |
/* Allocate the new string */ |
| 1812 |
newstr = (char *) malloc((newlen + 1) * sizeof(char)); |
| 1813 |
if(!newstr) |
| 1814 |
return NULL; |
| 1815 |
|
| 1816 |
/* Surround the string in quotes if necessary */ |
| 1817 |
p2 = newstr; |
| 1818 |
if(!escape_only) { |
| 1819 |
newstr[0] = '"'; |
| 1820 |
newstr[newlen - 1] = '"'; |
| 1821 |
p2++; |
| 1822 |
} |
| 1823 |
|
| 1824 |
/* Copy the string, escaping backslash and quote characters along the way */ |
| 1825 |
p1 = str; |
| 1826 |
while(*p1) { |
| 1827 |
if(*p1 == '\\' || *p1 == '"') { |
| 1828 |
*p2 = '\\'; |
| 1829 |
p2++; |
| 1830 |
} |
| 1831 |
|
| 1832 |
*p2 = *p1; |
| 1833 |
|
| 1834 |
p1++; |
| 1835 |
p2++; |
| 1836 |
} |
| 1837 |
|
| 1838 |
/* Terminate the string */ |
| 1839 |
newstr[newlen] = '\0'; |
| 1840 |
|
| 1841 |
return newstr; |
| 1842 |
} |
| 1843 |
|
| 1844 |
/*********************************************************************** |
| 1845 |
* |
| 1846 |
* imap_is_bchar() |
| 1847 |
* |
| 1848 |
* Portable test of whether the specified char is a "bchar" as defined in the |
| 1849 |
* grammar of RFC-5092. |
| 1850 |
*/ |
| 1851 |
static bool imap_is_bchar(char ch) |
| 1852 |
{ |
| 1853 |
switch(ch) { |
| 1854 |
/* bchar */ |
| 1855 |
case ':': case '@': case '/': |
| 1856 |
/* bchar -> achar */ |
| 1857 |
case '&': case '=': |
| 1858 |
/* bchar -> achar -> uchar -> unreserved */ |
| 1859 |
case '0': case '1': case '2': case '3': case '4': case '5': case '6': |
| 1860 |
case '7': case '8': case '9': |
| 1861 |
case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': case 'G': |
| 1862 |
case 'H': case 'I': case 'J': case 'K': case 'L': case 'M': case 'N': |
| 1863 |
case 'O': case 'P': case 'Q': case 'R': case 'S': case 'T': case 'U': |
| 1864 |
case 'V': case 'W': case 'X': case 'Y': case 'Z': |
| 1865 |
case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': case 'g': |
| 1866 |
case 'h': case 'i': case 'j': case 'k': case 'l': case 'm': case 'n': |
| 1867 |
case 'o': case 'p': case 'q': case 'r': case 's': case 't': case 'u': |
| 1868 |
case 'v': case 'w': case 'x': case 'y': case 'z': |
| 1869 |
case '-': case '.': case '_': case '~': |
| 1870 |
/* bchar -> achar -> uchar -> sub-delims-sh */ |
| 1871 |
case '!': case '$': case '\'': case '(': case ')': case '*': |
| 1872 |
case '+': case ',': |
| 1873 |
/* bchar -> achar -> uchar -> pct-encoded */ |
| 1874 |
case '%': /* HEXDIG chars are already included above */ |
| 1875 |
return true; |
| 1876 |
|
| 1877 |
default: |
| 1878 |
return false; |
| 1879 |
} |
| 1880 |
} |
| 1881 |
|
| 1882 |
/*********************************************************************** |
| 1883 |
* |
| 1884 |
* imap_parse_url_options() |
| 1885 |
* |
| 1886 |
* Parse the URL login options. |
| 1887 |
*/ |
| 1888 |
static CURLcode imap_parse_url_options(struct connectdata *conn) |
| 1889 |
{ |
| 1890 |
CURLcode result = CURLE_OK; |
| 1891 |
struct imap_conn *imapc = &conn->proto.imapc; |
| 1892 |
const char *ptr = conn->options; |
| 1893 |
|
| 1894 |
imapc->sasl.resetprefs = TRUE; |
| 1895 |
|
| 1896 |
while(!result && ptr && *ptr) { |
| 1897 |
const char *key = ptr; |
| 1898 |
const char *value; |
| 1899 |
|
| 1900 |
while(*ptr && *ptr != '=') |
| 1901 |
ptr++; |
| 1902 |
|
| 1903 |
value = ptr + 1; |
| 1904 |
|
| 1905 |
while(*ptr && *ptr != ';') |
| 1906 |
ptr++; |
| 1907 |
|
| 1908 |
if(strncasecompare(key, "AUTH=", 5)) |
| 1909 |
result = Curl_sasl_parse_url_auth_option(&imapc->sasl, |
| 1910 |
value, ptr - value); |
| 1911 |
else |
| 1912 |
result = CURLE_URL_MALFORMAT; |
| 1913 |
|
| 1914 |
if(*ptr == ';') |
| 1915 |
ptr++; |
| 1916 |
} |
| 1917 |
|
| 1918 |
switch(imapc->sasl.prefmech) { |
| 1919 |
case SASL_AUTH_NONE: |
| 1920 |
imapc->preftype = IMAP_TYPE_NONE; |
| 1921 |
break; |
| 1922 |
case SASL_AUTH_DEFAULT: |
| 1923 |
imapc->preftype = IMAP_TYPE_ANY; |
| 1924 |
break; |
| 1925 |
default: |
| 1926 |
imapc->preftype = IMAP_TYPE_SASL; |
| 1927 |
break; |
| 1928 |
} |
| 1929 |
|
| 1930 |
return result; |
| 1931 |
} |
| 1932 |
|
| 1933 |
/*********************************************************************** |
| 1934 |
* |
| 1935 |
* imap_parse_url_path() |
| 1936 |
* |
| 1937 |
* Parse the URL path into separate path components. |
| 1938 |
* |
| 1939 |
*/ |
| 1940 |
static CURLcode imap_parse_url_path(struct connectdata *conn) |
| 1941 |
{ |
| 1942 |
/* The imap struct is already initialised in imap_connect() */ |
| 1943 |
CURLcode result = CURLE_OK; |
| 1944 |
struct Curl_easy *data = conn->data; |
| 1945 |
struct IMAP *imap = data->req.protop; |
| 1946 |
const char *begin = &data->state.up.path[1]; /* skip leading slash */ |
| 1947 |
const char *ptr = begin; |
| 1948 |
|
| 1949 |
/* See how much of the URL is a valid path and decode it */ |
| 1950 |
while(imap_is_bchar(*ptr)) |
| 1951 |
ptr++; |
| 1952 |
|
| 1953 |
if(ptr != begin) { |
| 1954 |
/* Remove the trailing slash if present */ |
| 1955 |
const char *end = ptr; |
| 1956 |
if(end > begin && end[-1] == '/') |
| 1957 |
end--; |
| 1958 |
|
| 1959 |
result = Curl_urldecode(data, begin, end - begin, &imap->mailbox, NULL, |
| 1960 |
TRUE); |
| 1961 |
if(result) |
| 1962 |
return result; |
| 1963 |
} |
| 1964 |
else |
| 1965 |
imap->mailbox = NULL; |
| 1966 |
|
| 1967 |
/* There can be any number of parameters in the form ";NAME=VALUE" */ |
| 1968 |
while(*ptr == ';') { |
| 1969 |
char *name; |
| 1970 |
char *value; |
| 1971 |
size_t valuelen; |
| 1972 |
|
| 1973 |
/* Find the length of the name parameter */ |
| 1974 |
begin = ++ptr; |
| 1975 |
while(*ptr && *ptr != '=') |
| 1976 |
ptr++; |
| 1977 |
|
| 1978 |
if(!*ptr) |
| 1979 |
return CURLE_URL_MALFORMAT; |
| 1980 |
|
| 1981 |
/* Decode the name parameter */ |
| 1982 |
result = Curl_urldecode(data, begin, ptr - begin, &name, NULL, TRUE); |
| 1983 |
if(result) |
| 1984 |
return result; |
| 1985 |
|
| 1986 |
/* Find the length of the value parameter */ |
| 1987 |
begin = ++ptr; |
| 1988 |
while(imap_is_bchar(*ptr)) |
| 1989 |
ptr++; |
| 1990 |
|
| 1991 |
/* Decode the value parameter */ |
| 1992 |
result = Curl_urldecode(data, begin, ptr - begin, &value, &valuelen, TRUE); |
| 1993 |
if(result) { |
| 1994 |
free(name); |
| 1995 |
return result; |
| 1996 |
} |
| 1997 |
|
| 1998 |
DEBUGF(infof(conn->data, "IMAP URL parameter '%s' = '%s'\n", name, value)); |
| 1999 |
|
| 2000 |
/* Process the known hierarchical parameters (UIDVALIDITY, UID, SECTION and |
| 2001 |
PARTIAL) stripping of the trailing slash character if it is present. |
| 2002 |
|
| 2003 |
Note: Unknown parameters trigger a URL_MALFORMAT error. */ |
| 2004 |
if(strcasecompare(name, "UIDVALIDITY") && !imap->uidvalidity) { |
| 2005 |
if(valuelen > 0 && value[valuelen - 1] == '/') |
| 2006 |
value[valuelen - 1] = '\0'; |
| 2007 |
|
| 2008 |
imap->uidvalidity = value; |
| 2009 |
value = NULL; |
| 2010 |
} |
| 2011 |
else if(strcasecompare(name, "UID") && !imap->uid) { |
| 2012 |
if(valuelen > 0 && value[valuelen - 1] == '/') |
| 2013 |
value[valuelen - 1] = '\0'; |
| 2014 |
|
| 2015 |
imap->uid = value; |
| 2016 |
value = NULL; |
| 2017 |
} |
| 2018 |
else if(strcasecompare(name, "MAILINDEX") && !imap->mindex) { |
| 2019 |
if(valuelen > 0 && value[valuelen - 1] == '/') |
| 2020 |
value[valuelen - 1] = '\0'; |
| 2021 |
|
| 2022 |
imap->mindex = value; |
| 2023 |
value = NULL; |
| 2024 |
} |
| 2025 |
else if(strcasecompare(name, "SECTION") && !imap->section) { |
| 2026 |
if(valuelen > 0 && value[valuelen - 1] == '/') |
| 2027 |
value[valuelen - 1] = '\0'; |
| 2028 |
|
| 2029 |
imap->section = value; |
| 2030 |
value = NULL; |
| 2031 |
} |
| 2032 |
else if(strcasecompare(name, "PARTIAL") && !imap->partial) { |
| 2033 |
if(valuelen > 0 && value[valuelen - 1] == '/') |
| 2034 |
value[valuelen - 1] = '\0'; |
| 2035 |
|
| 2036 |
imap->partial = value; |
| 2037 |
value = NULL; |
| 2038 |
} |
| 2039 |
else { |
| 2040 |
free(name); |
| 2041 |
free(value); |
| 2042 |
|
| 2043 |
return CURLE_URL_MALFORMAT; |
| 2044 |
} |
| 2045 |
|
| 2046 |
free(name); |
| 2047 |
free(value); |
| 2048 |
} |
| 2049 |
|
| 2050 |
/* Does the URL contain a query parameter? Only valid when we have a mailbox |
| 2051 |
and no UID as per RFC-5092 */ |
| 2052 |
if(imap->mailbox && !imap->uid && !imap->mindex) { |
| 2053 |
/* Get the query parameter, URL decoded */ |
| 2054 |
(void)curl_url_get(data->state.uh, CURLUPART_QUERY, &imap->query, |
| 2055 |
CURLU_URLDECODE); |
| 2056 |
} |
| 2057 |
|
| 2058 |
/* Any extra stuff at the end of the URL is an error */ |
| 2059 |
if(*ptr) |
| 2060 |
return CURLE_URL_MALFORMAT; |
| 2061 |
|
| 2062 |
return CURLE_OK; |
| 2063 |
} |
| 2064 |
|
| 2065 |
/*********************************************************************** |
| 2066 |
* |
| 2067 |
* imap_parse_custom_request() |
| 2068 |
* |
| 2069 |
* Parse the custom request. |
| 2070 |
*/ |
| 2071 |
static CURLcode imap_parse_custom_request(struct connectdata *conn) |
| 2072 |
{ |
| 2073 |
CURLcode result = CURLE_OK; |
| 2074 |
struct Curl_easy *data = conn->data; |
| 2075 |
struct IMAP *imap = data->req.protop; |
| 2076 |
const char *custom = data->set.str[STRING_CUSTOMREQUEST]; |
| 2077 |
|
| 2078 |
if(custom) { |
| 2079 |
/* URL decode the custom request */ |
| 2080 |
result = Curl_urldecode(data, custom, 0, &imap->custom, NULL, TRUE); |
| 2081 |
|
| 2082 |
/* Extract the parameters if specified */ |
| 2083 |
if(!result) { |
| 2084 |
const char *params = imap->custom; |
| 2085 |
|
| 2086 |
while(*params && *params != ' ') |
| 2087 |
params++; |
| 2088 |
|
| 2089 |
if(*params) { |
| 2090 |
imap->custom_params = strdup(params); |
| 2091 |
imap->custom[params - imap->custom] = '\0'; |
| 2092 |
|
| 2093 |
if(!imap->custom_params) |
| 2094 |
result = CURLE_OUT_OF_MEMORY; |
| 2095 |
} |
| 2096 |
} |
| 2097 |
} |
| 2098 |
|
| 2099 |
return result; |
| 2100 |
} |
| 2101 |
|
| 2102 |
#endif /* CURL_DISABLE_IMAP */ |