| 1 |
/*************************************************************************** |
| 2 |
* _ _ ____ _ |
| 3 |
* Project ___| | | | _ \| | |
| 4 |
* / __| | | | |_) | | |
| 5 |
* | (__| |_| | _ <| |___ |
| 6 |
* \___|\___/|_| \_\_____| |
| 7 |
* |
| 8 |
* Copyright (C) 1998 - 2020, Daniel Stenberg, <[email protected]>, et al. |
| 9 |
* |
| 10 |
* This software is licensed as described in the file COPYING, which |
| 11 |
* you should have received as part of this distribution. The terms |
| 12 |
* are also available at https://curl.haxx.se/docs/copyright.html. |
| 13 |
* |
| 14 |
* You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| 15 |
* copies of the Software, and permit persons to whom the Software is |
| 16 |
* furnished to do so, under the terms of the COPYING file. |
| 17 |
* |
| 18 |
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| 19 |
* KIND, either express or implied. |
| 20 |
* |
| 21 |
***************************************************************************/ |
| 22 |
|
| 23 |
#include "curl_setup.h" |
| 24 |
|
| 25 |
#ifndef CURL_DISABLE_HTTP |
| 26 |
|
| 27 |
#ifdef HAVE_NETINET_IN_H |
| 28 |
#include <netinet/in.h> |
| 29 |
#endif |
| 30 |
|
| 31 |
#ifdef HAVE_NETDB_H |
| 32 |
#include <netdb.h> |
| 33 |
#endif |
| 34 |
#ifdef HAVE_ARPA_INET_H |
| 35 |
#include <arpa/inet.h> |
| 36 |
#endif |
| 37 |
#ifdef HAVE_NET_IF_H |
| 38 |
#include <net/if.h> |
| 39 |
#endif |
| 40 |
#ifdef HAVE_SYS_IOCTL_H |
| 41 |
#include <sys/ioctl.h> |
| 42 |
#endif |
| 43 |
|
| 44 |
#ifdef HAVE_SYS_PARAM_H |
| 45 |
#include <sys/param.h> |
| 46 |
#endif |
| 47 |
|
| 48 |
#include "urldata.h" |
| 49 |
#include <curl/curl.h> |
| 50 |
#include "transfer.h" |
| 51 |
#include "sendf.h" |
| 52 |
#include "formdata.h" |
| 53 |
#include "mime.h" |
| 54 |
#include "progress.h" |
| 55 |
#include "curl_base64.h" |
| 56 |
#include "cookie.h" |
| 57 |
#include "vauth/vauth.h" |
| 58 |
#include "vtls/vtls.h" |
| 59 |
#include "http_digest.h" |
| 60 |
#include "http_ntlm.h" |
| 61 |
#include "curl_ntlm_wb.h" |
| 62 |
#include "http_negotiate.h" |
| 63 |
#include "url.h" |
| 64 |
#include "share.h" |
| 65 |
#include "hostip.h" |
| 66 |
#include "http.h" |
| 67 |
#include "select.h" |
| 68 |
#include "parsedate.h" /* for the week day and month names */ |
| 69 |
#include "strtoofft.h" |
| 70 |
#include "multiif.h" |
| 71 |
#include "strcase.h" |
| 72 |
#include "content_encoding.h" |
| 73 |
#include "http_proxy.h" |
| 74 |
#include "warnless.h" |
| 75 |
#include "non-ascii.h" |
| 76 |
#include "http2.h" |
| 77 |
#include "connect.h" |
| 78 |
#include "strdup.h" |
| 79 |
#include "altsvc.h" |
| 80 |
|
| 81 |
/* The last 3 #include files should be in this order */ |
| 82 |
#include "curl_printf.h" |
| 83 |
#include "curl_memory.h" |
| 84 |
#include "memdebug.h" |
| 85 |
|
| 86 |
/* |
| 87 |
* Forward declarations. |
| 88 |
*/ |
| 89 |
|
| 90 |
static int http_getsock_do(struct connectdata *conn, |
| 91 |
curl_socket_t *socks); |
| 92 |
static int http_should_fail(struct connectdata *conn); |
| 93 |
|
| 94 |
#ifndef CURL_DISABLE_PROXY |
| 95 |
static CURLcode add_haproxy_protocol_header(struct connectdata *conn); |
| 96 |
#endif |
| 97 |
|
| 98 |
#ifdef USE_SSL |
| 99 |
static CURLcode https_connecting(struct connectdata *conn, bool *done); |
| 100 |
static int https_getsock(struct connectdata *conn, |
| 101 |
curl_socket_t *socks); |
| 102 |
#else |
| 103 |
#define https_connecting(x,y) CURLE_COULDNT_CONNECT |
| 104 |
#endif |
| 105 |
static CURLcode http_setup_conn(struct connectdata *conn); |
| 106 |
|
| 107 |
/* |
| 108 |
* HTTP handler interface. |
| 109 |
*/ |
| 110 |
const struct Curl_handler Curl_handler_http = { |
| 111 |
"HTTP", /* scheme */ |
| 112 |
http_setup_conn, /* setup_connection */ |
| 113 |
Curl_http, /* do_it */ |
| 114 |
Curl_http_done, /* done */ |
| 115 |
ZERO_NULL, /* do_more */ |
| 116 |
Curl_http_connect, /* connect_it */ |
| 117 |
ZERO_NULL, /* connecting */ |
| 118 |
ZERO_NULL, /* doing */ |
| 119 |
ZERO_NULL, /* proto_getsock */ |
| 120 |
http_getsock_do, /* doing_getsock */ |
| 121 |
ZERO_NULL, /* domore_getsock */ |
| 122 |
ZERO_NULL, /* perform_getsock */ |
| 123 |
ZERO_NULL, /* disconnect */ |
| 124 |
ZERO_NULL, /* readwrite */ |
| 125 |
ZERO_NULL, /* connection_check */ |
| 126 |
PORT_HTTP, /* defport */ |
| 127 |
CURLPROTO_HTTP, /* protocol */ |
| 128 |
PROTOPT_CREDSPERREQUEST /* flags */ |
| 129 |
}; |
| 130 |
|
| 131 |
#ifdef USE_SSL |
| 132 |
/* |
| 133 |
* HTTPS handler interface. |
| 134 |
*/ |
| 135 |
const struct Curl_handler Curl_handler_https = { |
| 136 |
"HTTPS", /* scheme */ |
| 137 |
http_setup_conn, /* setup_connection */ |
| 138 |
Curl_http, /* do_it */ |
| 139 |
Curl_http_done, /* done */ |
| 140 |
ZERO_NULL, /* do_more */ |
| 141 |
Curl_http_connect, /* connect_it */ |
| 142 |
https_connecting, /* connecting */ |
| 143 |
ZERO_NULL, /* doing */ |
| 144 |
https_getsock, /* proto_getsock */ |
| 145 |
http_getsock_do, /* doing_getsock */ |
| 146 |
ZERO_NULL, /* domore_getsock */ |
| 147 |
ZERO_NULL, /* perform_getsock */ |
| 148 |
ZERO_NULL, /* disconnect */ |
| 149 |
ZERO_NULL, /* readwrite */ |
| 150 |
ZERO_NULL, /* connection_check */ |
| 151 |
PORT_HTTPS, /* defport */ |
| 152 |
CURLPROTO_HTTPS, /* protocol */ |
| 153 |
PROTOPT_SSL | PROTOPT_CREDSPERREQUEST | PROTOPT_ALPN_NPN /* flags */ |
| 154 |
}; |
| 155 |
#endif |
| 156 |
|
| 157 |
static CURLcode http_setup_conn(struct connectdata *conn) |
| 158 |
{ |
| 159 |
/* allocate the HTTP-specific struct for the Curl_easy, only to survive |
| 160 |
during this request */ |
| 161 |
struct HTTP *http; |
| 162 |
struct Curl_easy *data = conn->data; |
| 163 |
DEBUGASSERT(data->req.protop == NULL); |
| 164 |
|
| 165 |
http = calloc(1, sizeof(struct HTTP)); |
| 166 |
if(!http) |
| 167 |
return CURLE_OUT_OF_MEMORY; |
| 168 |
|
| 169 |
Curl_mime_initpart(&http->form, conn->data); |
| 170 |
data->req.protop = http; |
| 171 |
|
| 172 |
if(data->set.httpversion == CURL_HTTP_VERSION_3) { |
| 173 |
if(conn->handler->flags & PROTOPT_SSL) |
| 174 |
/* Only go HTTP/3 directly on HTTPS URLs. It needs a UDP socket and does |
| 175 |
the QUIC dance. */ |
| 176 |
conn->transport = TRNSPRT_QUIC; |
| 177 |
else { |
| 178 |
failf(data, "HTTP/3 requested for non-HTTPS URL"); |
| 179 |
return CURLE_URL_MALFORMAT; |
| 180 |
} |
| 181 |
} |
| 182 |
else { |
| 183 |
if(!CONN_INUSE(conn)) |
| 184 |
/* if not already multi-using, setup connection details */ |
| 185 |
Curl_http2_setup_conn(conn); |
| 186 |
Curl_http2_setup_req(data); |
| 187 |
} |
| 188 |
return CURLE_OK; |
| 189 |
} |
| 190 |
|
| 191 |
#ifndef CURL_DISABLE_PROXY |
| 192 |
/* |
| 193 |
* checkProxyHeaders() checks the linked list of custom proxy headers |
| 194 |
* if proxy headers are not available, then it will lookup into http header |
| 195 |
* link list |
| 196 |
* |
| 197 |
* It takes a connectdata struct as input instead of the Curl_easy simply to |
| 198 |
* know if this is a proxy request or not, as it then might check a different |
| 199 |
* header list. Provide the header prefix without colon!. |
| 200 |
*/ |
| 201 |
char *Curl_checkProxyheaders(const struct connectdata *conn, |
| 202 |
const char *thisheader) |
| 203 |
{ |
| 204 |
struct curl_slist *head; |
| 205 |
size_t thislen = strlen(thisheader); |
| 206 |
struct Curl_easy *data = conn->data; |
| 207 |
|
| 208 |
for(head = (conn->bits.proxy && data->set.sep_headers) ? |
| 209 |
data->set.proxyheaders : data->set.headers; |
| 210 |
head; head = head->next) { |
| 211 |
if(strncasecompare(head->data, thisheader, thislen) && |
| 212 |
Curl_headersep(head->data[thislen])) |
| 213 |
return head->data; |
| 214 |
} |
| 215 |
|
| 216 |
return NULL; |
| 217 |
} |
| 218 |
#else |
| 219 |
/* disabled */ |
| 220 |
#define Curl_checkProxyheaders(x,y) NULL |
| 221 |
#endif |
| 222 |
|
| 223 |
/* |
| 224 |
* Strip off leading and trailing whitespace from the value in the |
| 225 |
* given HTTP header line and return a strdupped copy. Returns NULL in |
| 226 |
* case of allocation failure. Returns an empty string if the header value |
| 227 |
* consists entirely of whitespace. |
| 228 |
*/ |
| 229 |
char *Curl_copy_header_value(const char *header) |
| 230 |
{ |
| 231 |
const char *start; |
| 232 |
const char *end; |
| 233 |
char *value; |
| 234 |
size_t len; |
| 235 |
|
| 236 |
/* Find the end of the header name */ |
| 237 |
while(*header && (*header != ':')) |
| 238 |
++header; |
| 239 |
|
| 240 |
if(*header) |
| 241 |
/* Skip over colon */ |
| 242 |
++header; |
| 243 |
|
| 244 |
/* Find the first non-space letter */ |
| 245 |
start = header; |
| 246 |
while(*start && ISSPACE(*start)) |
| 247 |
start++; |
| 248 |
|
| 249 |
/* data is in the host encoding so |
| 250 |
use '\r' and '\n' instead of 0x0d and 0x0a */ |
| 251 |
end = strchr(start, '\r'); |
| 252 |
if(!end) |
| 253 |
end = strchr(start, '\n'); |
| 254 |
if(!end) |
| 255 |
end = strchr(start, '\0'); |
| 256 |
if(!end) |
| 257 |
return NULL; |
| 258 |
|
| 259 |
/* skip all trailing space letters */ |
| 260 |
while((end > start) && ISSPACE(*end)) |
| 261 |
end--; |
| 262 |
|
| 263 |
/* get length of the type */ |
| 264 |
len = end - start + 1; |
| 265 |
|
| 266 |
value = malloc(len + 1); |
| 267 |
if(!value) |
| 268 |
return NULL; |
| 269 |
|
| 270 |
memcpy(value, start, len); |
| 271 |
value[len] = 0; /* zero terminate */ |
| 272 |
|
| 273 |
return value; |
| 274 |
} |
| 275 |
|
| 276 |
#ifndef CURL_DISABLE_HTTP_AUTH |
| 277 |
/* |
| 278 |
* http_output_basic() sets up an Authorization: header (or the proxy version) |
| 279 |
* for HTTP Basic authentication. |
| 280 |
* |
| 281 |
* Returns CURLcode. |
| 282 |
*/ |
| 283 |
static CURLcode http_output_basic(struct connectdata *conn, bool proxy) |
| 284 |
{ |
| 285 |
size_t size = 0; |
| 286 |
char *authorization = NULL; |
| 287 |
struct Curl_easy *data = conn->data; |
| 288 |
char **userp; |
| 289 |
const char *user; |
| 290 |
const char *pwd; |
| 291 |
CURLcode result; |
| 292 |
char *out; |
| 293 |
|
| 294 |
if(proxy) { |
| 295 |
userp = &conn->allocptr.proxyuserpwd; |
| 296 |
user = conn->http_proxy.user; |
| 297 |
pwd = conn->http_proxy.passwd; |
| 298 |
} |
| 299 |
else { |
| 300 |
userp = &conn->allocptr.userpwd; |
| 301 |
user = conn->user; |
| 302 |
pwd = conn->passwd; |
| 303 |
} |
| 304 |
|
| 305 |
out = aprintf("%s:%s", user, pwd); |
| 306 |
if(!out) |
| 307 |
return CURLE_OUT_OF_MEMORY; |
| 308 |
|
| 309 |
result = Curl_base64_encode(data, out, strlen(out), &authorization, &size); |
| 310 |
if(result) |
| 311 |
goto fail; |
| 312 |
|
| 313 |
if(!authorization) { |
| 314 |
result = CURLE_REMOTE_ACCESS_DENIED; |
| 315 |
goto fail; |
| 316 |
} |
| 317 |
|
| 318 |
free(*userp); |
| 319 |
*userp = aprintf("%sAuthorization: Basic %s\r\n", |
| 320 |
proxy ? "Proxy-" : "", |
| 321 |
authorization); |
| 322 |
free(authorization); |
| 323 |
if(!*userp) { |
| 324 |
result = CURLE_OUT_OF_MEMORY; |
| 325 |
goto fail; |
| 326 |
} |
| 327 |
|
| 328 |
fail: |
| 329 |
free(out); |
| 330 |
return result; |
| 331 |
} |
| 332 |
|
| 333 |
/* |
| 334 |
* http_output_bearer() sets up an Authorization: header |
| 335 |
* for HTTP Bearer authentication. |
| 336 |
* |
| 337 |
* Returns CURLcode. |
| 338 |
*/ |
| 339 |
static CURLcode http_output_bearer(struct connectdata *conn) |
| 340 |
{ |
| 341 |
char **userp; |
| 342 |
CURLcode result = CURLE_OK; |
| 343 |
|
| 344 |
userp = &conn->allocptr.userpwd; |
| 345 |
free(*userp); |
| 346 |
*userp = aprintf("Authorization: Bearer %s\r\n", |
| 347 |
conn->data->set.str[STRING_BEARER]); |
| 348 |
|
| 349 |
if(!*userp) { |
| 350 |
result = CURLE_OUT_OF_MEMORY; |
| 351 |
goto fail; |
| 352 |
} |
| 353 |
|
| 354 |
fail: |
| 355 |
return result; |
| 356 |
} |
| 357 |
|
| 358 |
#endif |
| 359 |
|
| 360 |
/* pickoneauth() selects the most favourable authentication method from the |
| 361 |
* ones available and the ones we want. |
| 362 |
* |
| 363 |
* return TRUE if one was picked |
| 364 |
*/ |
| 365 |
static bool pickoneauth(struct auth *pick, unsigned long mask) |
| 366 |
{ |
| 367 |
bool picked; |
| 368 |
/* only deal with authentication we want */ |
| 369 |
unsigned long avail = pick->avail & pick->want & mask; |
| 370 |
picked = TRUE; |
| 371 |
|
| 372 |
/* The order of these checks is highly relevant, as this will be the order |
| 373 |
of preference in case of the existence of multiple accepted types. */ |
| 374 |
if(avail & CURLAUTH_NEGOTIATE) |
| 375 |
pick->picked = CURLAUTH_NEGOTIATE; |
| 376 |
else if(avail & CURLAUTH_BEARER) |
| 377 |
pick->picked = CURLAUTH_BEARER; |
| 378 |
else if(avail & CURLAUTH_DIGEST) |
| 379 |
pick->picked = CURLAUTH_DIGEST; |
| 380 |
else if(avail & CURLAUTH_NTLM) |
| 381 |
pick->picked = CURLAUTH_NTLM; |
| 382 |
else if(avail & CURLAUTH_NTLM_WB) |
| 383 |
pick->picked = CURLAUTH_NTLM_WB; |
| 384 |
else if(avail & CURLAUTH_BASIC) |
| 385 |
pick->picked = CURLAUTH_BASIC; |
| 386 |
else { |
| 387 |
pick->picked = CURLAUTH_PICKNONE; /* we select to use nothing */ |
| 388 |
picked = FALSE; |
| 389 |
} |
| 390 |
pick->avail = CURLAUTH_NONE; /* clear it here */ |
| 391 |
|
| 392 |
return picked; |
| 393 |
} |
| 394 |
|
| 395 |
/* |
| 396 |
* http_perhapsrewind() |
| 397 |
* |
| 398 |
* If we are doing POST or PUT { |
| 399 |
* If we have more data to send { |
| 400 |
* If we are doing NTLM { |
| 401 |
* Keep sending since we must not disconnect |
| 402 |
* } |
| 403 |
* else { |
| 404 |
* If there is more than just a little data left to send, close |
| 405 |
* the current connection by force. |
| 406 |
* } |
| 407 |
* } |
| 408 |
* If we have sent any data { |
| 409 |
* If we don't have track of all the data { |
| 410 |
* call app to tell it to rewind |
| 411 |
* } |
| 412 |
* else { |
| 413 |
* rewind internally so that the operation can restart fine |
| 414 |
* } |
| 415 |
* } |
| 416 |
* } |
| 417 |
*/ |
| 418 |
static CURLcode http_perhapsrewind(struct connectdata *conn) |
| 419 |
{ |
| 420 |
struct Curl_easy *data = conn->data; |
| 421 |
struct HTTP *http = data->req.protop; |
| 422 |
curl_off_t bytessent; |
| 423 |
curl_off_t expectsend = -1; /* default is unknown */ |
| 424 |
|
| 425 |
if(!http) |
| 426 |
/* If this is still NULL, we have not reach very far and we can safely |
| 427 |
skip this rewinding stuff */ |
| 428 |
return CURLE_OK; |
| 429 |
|
| 430 |
switch(data->set.httpreq) { |
| 431 |
case HTTPREQ_GET: |
| 432 |
case HTTPREQ_HEAD: |
| 433 |
return CURLE_OK; |
| 434 |
default: |
| 435 |
break; |
| 436 |
} |
| 437 |
|
| 438 |
bytessent = data->req.writebytecount; |
| 439 |
|
| 440 |
if(conn->bits.authneg) { |
| 441 |
/* This is a state where we are known to be negotiating and we don't send |
| 442 |
any data then. */ |
| 443 |
expectsend = 0; |
| 444 |
} |
| 445 |
else if(!conn->bits.protoconnstart) { |
| 446 |
/* HTTP CONNECT in progress: there is no body */ |
| 447 |
expectsend = 0; |
| 448 |
} |
| 449 |
else { |
| 450 |
/* figure out how much data we are expected to send */ |
| 451 |
switch(data->set.httpreq) { |
| 452 |
case HTTPREQ_POST: |
| 453 |
case HTTPREQ_PUT: |
| 454 |
if(data->state.infilesize != -1) |
| 455 |
expectsend = data->state.infilesize; |
| 456 |
break; |
| 457 |
case HTTPREQ_POST_FORM: |
| 458 |
case HTTPREQ_POST_MIME: |
| 459 |
expectsend = http->postsize; |
| 460 |
break; |
| 461 |
default: |
| 462 |
break; |
| 463 |
} |
| 464 |
} |
| 465 |
|
| 466 |
conn->bits.rewindaftersend = FALSE; /* default */ |
| 467 |
|
| 468 |
if((expectsend == -1) || (expectsend > bytessent)) { |
| 469 |
#if defined(USE_NTLM) |
| 470 |
/* There is still data left to send */ |
| 471 |
if((data->state.authproxy.picked == CURLAUTH_NTLM) || |
| 472 |
(data->state.authhost.picked == CURLAUTH_NTLM) || |
| 473 |
(data->state.authproxy.picked == CURLAUTH_NTLM_WB) || |
| 474 |
(data->state.authhost.picked == CURLAUTH_NTLM_WB)) { |
| 475 |
if(((expectsend - bytessent) < 2000) || |
| 476 |
(conn->http_ntlm_state != NTLMSTATE_NONE) || |
| 477 |
(conn->proxy_ntlm_state != NTLMSTATE_NONE)) { |
| 478 |
/* The NTLM-negotiation has started *OR* there is just a little (<2K) |
| 479 |
data left to send, keep on sending. */ |
| 480 |
|
| 481 |
/* rewind data when completely done sending! */ |
| 482 |
if(!conn->bits.authneg && (conn->writesockfd != CURL_SOCKET_BAD)) { |
| 483 |
conn->bits.rewindaftersend = TRUE; |
| 484 |
infof(data, "Rewind stream after send\n"); |
| 485 |
} |
| 486 |
|
| 487 |
return CURLE_OK; |
| 488 |
} |
| 489 |
|
| 490 |
if(conn->bits.close) |
| 491 |
/* this is already marked to get closed */ |
| 492 |
return CURLE_OK; |
| 493 |
|
| 494 |
infof(data, "NTLM send, close instead of sending %" |
| 495 |
CURL_FORMAT_CURL_OFF_T " bytes\n", |
| 496 |
(curl_off_t)(expectsend - bytessent)); |
| 497 |
} |
| 498 |
#endif |
| 499 |
#if defined(USE_SPNEGO) |
| 500 |
/* There is still data left to send */ |
| 501 |
if((data->state.authproxy.picked == CURLAUTH_NEGOTIATE) || |
| 502 |
(data->state.authhost.picked == CURLAUTH_NEGOTIATE)) { |
| 503 |
if(((expectsend - bytessent) < 2000) || |
| 504 |
(conn->http_negotiate_state != GSS_AUTHNONE) || |
| 505 |
(conn->proxy_negotiate_state != GSS_AUTHNONE)) { |
| 506 |
/* The NEGOTIATE-negotiation has started *OR* |
| 507 |
there is just a little (<2K) data left to send, keep on sending. */ |
| 508 |
|
| 509 |
/* rewind data when completely done sending! */ |
| 510 |
if(!conn->bits.authneg && (conn->writesockfd != CURL_SOCKET_BAD)) { |
| 511 |
conn->bits.rewindaftersend = TRUE; |
| 512 |
infof(data, "Rewind stream after send\n"); |
| 513 |
} |
| 514 |
|
| 515 |
return CURLE_OK; |
| 516 |
} |
| 517 |
|
| 518 |
if(conn->bits.close) |
| 519 |
/* this is already marked to get closed */ |
| 520 |
return CURLE_OK; |
| 521 |
|
| 522 |
infof(data, "NEGOTIATE send, close instead of sending %" |
| 523 |
CURL_FORMAT_CURL_OFF_T " bytes\n", |
| 524 |
(curl_off_t)(expectsend - bytessent)); |
| 525 |
} |
| 526 |
#endif |
| 527 |
|
| 528 |
/* This is not NEGOTIATE/NTLM or many bytes left to send: close */ |
| 529 |
streamclose(conn, "Mid-auth HTTP and much data left to send"); |
| 530 |
data->req.size = 0; /* don't download any more than 0 bytes */ |
| 531 |
|
| 532 |
/* There still is data left to send, but this connection is marked for |
| 533 |
closure so we can safely do the rewind right now */ |
| 534 |
} |
| 535 |
|
| 536 |
if(bytessent) |
| 537 |
/* we rewind now at once since if we already sent something */ |
| 538 |
return Curl_readrewind(conn); |
| 539 |
|
| 540 |
return CURLE_OK; |
| 541 |
} |
| 542 |
|
| 543 |
/* |
| 544 |
* Curl_http_auth_act() gets called when all HTTP headers have been received |
| 545 |
* and it checks what authentication methods that are available and decides |
| 546 |
* which one (if any) to use. It will set 'newurl' if an auth method was |
| 547 |
* picked. |
| 548 |
*/ |
| 549 |
|
| 550 |
CURLcode Curl_http_auth_act(struct connectdata *conn) |
| 551 |
{ |
| 552 |
struct Curl_easy *data = conn->data; |
| 553 |
bool pickhost = FALSE; |
| 554 |
bool pickproxy = FALSE; |
| 555 |
CURLcode result = CURLE_OK; |
| 556 |
unsigned long authmask = ~0ul; |
| 557 |
|
| 558 |
if(!data->set.str[STRING_BEARER]) |
| 559 |
authmask &= (unsigned long)~CURLAUTH_BEARER; |
| 560 |
|
| 561 |
if(100 <= data->req.httpcode && 199 >= data->req.httpcode) |
| 562 |
/* this is a transient response code, ignore */ |
| 563 |
return CURLE_OK; |
| 564 |
|
| 565 |
if(data->state.authproblem) |
| 566 |
return data->set.http_fail_on_error?CURLE_HTTP_RETURNED_ERROR:CURLE_OK; |
| 567 |
|
| 568 |
if((conn->bits.user_passwd || data->set.str[STRING_BEARER]) && |
| 569 |
((data->req.httpcode == 401) || |
| 570 |
(conn->bits.authneg && data->req.httpcode < 300))) { |
| 571 |
pickhost = pickoneauth(&data->state.authhost, authmask); |
| 572 |
if(!pickhost) |
| 573 |
data->state.authproblem = TRUE; |
| 574 |
if(data->state.authhost.picked == CURLAUTH_NTLM && |
| 575 |
conn->httpversion > 11) { |
| 576 |
infof(data, "Forcing HTTP/1.1 for NTLM"); |
| 577 |
connclose(conn, "Force HTTP/1.1 connection"); |
| 578 |
conn->data->set.httpversion = CURL_HTTP_VERSION_1_1; |
| 579 |
} |
| 580 |
} |
| 581 |
if(conn->bits.proxy_user_passwd && |
| 582 |
((data->req.httpcode == 407) || |
| 583 |
(conn->bits.authneg && data->req.httpcode < 300))) { |
| 584 |
pickproxy = pickoneauth(&data->state.authproxy, |
| 585 |
authmask & ~CURLAUTH_BEARER); |
| 586 |
if(!pickproxy) |
| 587 |
data->state.authproblem = TRUE; |
| 588 |
} |
| 589 |
|
| 590 |
if(pickhost || pickproxy) { |
| 591 |
if((data->set.httpreq != HTTPREQ_GET) && |
| 592 |
(data->set.httpreq != HTTPREQ_HEAD) && |
| 593 |
!conn->bits.rewindaftersend) { |
| 594 |
result = http_perhapsrewind(conn); |
| 595 |
if(result) |
| 596 |
return result; |
| 597 |
} |
| 598 |
/* In case this is GSS auth, the newurl field is already allocated so |
| 599 |
we must make sure to free it before allocating a new one. As figured |
| 600 |
out in bug #2284386 */ |
| 601 |
Curl_safefree(data->req.newurl); |
| 602 |
data->req.newurl = strdup(data->change.url); /* clone URL */ |
| 603 |
if(!data->req.newurl) |
| 604 |
return CURLE_OUT_OF_MEMORY; |
| 605 |
} |
| 606 |
else if((data->req.httpcode < 300) && |
| 607 |
(!data->state.authhost.done) && |
| 608 |
conn->bits.authneg) { |
| 609 |
/* no (known) authentication available, |
| 610 |
authentication is not "done" yet and |
| 611 |
no authentication seems to be required and |
| 612 |
we didn't try HEAD or GET */ |
| 613 |
if((data->set.httpreq != HTTPREQ_GET) && |
| 614 |
(data->set.httpreq != HTTPREQ_HEAD)) { |
| 615 |
data->req.newurl = strdup(data->change.url); /* clone URL */ |
| 616 |
if(!data->req.newurl) |
| 617 |
return CURLE_OUT_OF_MEMORY; |
| 618 |
data->state.authhost.done = TRUE; |
| 619 |
} |
| 620 |
} |
| 621 |
if(http_should_fail(conn)) { |
| 622 |
failf(data, "The requested URL returned error: %d", |
| 623 |
data->req.httpcode); |
| 624 |
result = CURLE_HTTP_RETURNED_ERROR; |
| 625 |
} |
| 626 |
|
| 627 |
return result; |
| 628 |
} |
| 629 |
|
| 630 |
#ifndef CURL_DISABLE_HTTP_AUTH |
| 631 |
/* |
| 632 |
* Output the correct authentication header depending on the auth type |
| 633 |
* and whether or not it is to a proxy. |
| 634 |
*/ |
| 635 |
static CURLcode |
| 636 |
output_auth_headers(struct connectdata *conn, |
| 637 |
struct auth *authstatus, |
| 638 |
const char *request, |
| 639 |
const char *path, |
| 640 |
bool proxy) |
| 641 |
{ |
| 642 |
const char *auth = NULL; |
| 643 |
CURLcode result = CURLE_OK; |
| 644 |
struct Curl_easy *data = conn->data; |
| 645 |
|
| 646 |
#ifdef CURL_DISABLE_CRYPTO_AUTH |
| 647 |
(void)request; |
| 648 |
(void)path; |
| 649 |
#endif |
| 650 |
|
| 651 |
#ifdef USE_SPNEGO |
| 652 |
if(authstatus->picked == CURLAUTH_NEGOTIATE) { |
| 653 |
auth = "Negotiate"; |
| 654 |
result = Curl_output_negotiate(conn, proxy); |
| 655 |
if(result) |
| 656 |
return result; |
| 657 |
} |
| 658 |
else |
| 659 |
#endif |
| 660 |
#ifdef USE_NTLM |
| 661 |
if(authstatus->picked == CURLAUTH_NTLM) { |
| 662 |
auth = "NTLM"; |
| 663 |
result = Curl_output_ntlm(conn, proxy); |
| 664 |
if(result) |
| 665 |
return result; |
| 666 |
} |
| 667 |
else |
| 668 |
#endif |
| 669 |
#if defined(USE_NTLM) && defined(NTLM_WB_ENABLED) |
| 670 |
if(authstatus->picked == CURLAUTH_NTLM_WB) { |
| 671 |
auth = "NTLM_WB"; |
| 672 |
result = Curl_output_ntlm_wb(conn, proxy); |
| 673 |
if(result) |
| 674 |
return result; |
| 675 |
} |
| 676 |
else |
| 677 |
#endif |
| 678 |
#ifndef CURL_DISABLE_CRYPTO_AUTH |
| 679 |
if(authstatus->picked == CURLAUTH_DIGEST) { |
| 680 |
auth = "Digest"; |
| 681 |
result = Curl_output_digest(conn, |
| 682 |
proxy, |
| 683 |
(const unsigned char *)request, |
| 684 |
(const unsigned char *)path); |
| 685 |
if(result) |
| 686 |
return result; |
| 687 |
} |
| 688 |
else |
| 689 |
#endif |
| 690 |
if(authstatus->picked == CURLAUTH_BASIC) { |
| 691 |
/* Basic */ |
| 692 |
if((proxy && conn->bits.proxy_user_passwd && |
| 693 |
!Curl_checkProxyheaders(conn, "Proxy-authorization")) || |
| 694 |
(!proxy && conn->bits.user_passwd && |
| 695 |
!Curl_checkheaders(conn, "Authorization"))) { |
| 696 |
auth = "Basic"; |
| 697 |
result = http_output_basic(conn, proxy); |
| 698 |
if(result) |
| 699 |
return result; |
| 700 |
} |
| 701 |
|
| 702 |
/* NOTE: this function should set 'done' TRUE, as the other auth |
| 703 |
functions work that way */ |
| 704 |
authstatus->done = TRUE; |
| 705 |
} |
| 706 |
if(authstatus->picked == CURLAUTH_BEARER) { |
| 707 |
/* Bearer */ |
| 708 |
if((!proxy && data->set.str[STRING_BEARER] && |
| 709 |
!Curl_checkheaders(conn, "Authorization:"))) { |
| 710 |
auth = "Bearer"; |
| 711 |
result = http_output_bearer(conn); |
| 712 |
if(result) |
| 713 |
return result; |
| 714 |
} |
| 715 |
|
| 716 |
/* NOTE: this function should set 'done' TRUE, as the other auth |
| 717 |
functions work that way */ |
| 718 |
authstatus->done = TRUE; |
| 719 |
} |
| 720 |
|
| 721 |
if(auth) { |
| 722 |
infof(data, "%s auth using %s with user '%s'\n", |
| 723 |
proxy ? "Proxy" : "Server", auth, |
| 724 |
proxy ? (conn->http_proxy.user ? conn->http_proxy.user : "") : |
| 725 |
(conn->user ? conn->user : "")); |
| 726 |
authstatus->multipass = (!authstatus->done) ? TRUE : FALSE; |
| 727 |
} |
| 728 |
else |
| 729 |
authstatus->multipass = FALSE; |
| 730 |
|
| 731 |
return CURLE_OK; |
| 732 |
} |
| 733 |
|
| 734 |
/** |
| 735 |
* Curl_http_output_auth() setups the authentication headers for the |
| 736 |
* host/proxy and the correct authentication |
| 737 |
* method. conn->data->state.authdone is set to TRUE when authentication is |
| 738 |
* done. |
| 739 |
* |
| 740 |
* @param conn all information about the current connection |
| 741 |
* @param request pointer to the request keyword |
| 742 |
* @param path pointer to the requested path; should include query part |
| 743 |
* @param proxytunnel boolean if this is the request setting up a "proxy |
| 744 |
* tunnel" |
| 745 |
* |
| 746 |
* @returns CURLcode |
| 747 |
*/ |
| 748 |
CURLcode |
| 749 |
Curl_http_output_auth(struct connectdata *conn, |
| 750 |
const char *request, |
| 751 |
const char *path, |
| 752 |
bool proxytunnel) /* TRUE if this is the request setting |
| 753 |
up the proxy tunnel */ |
| 754 |
{ |
| 755 |
CURLcode result = CURLE_OK; |
| 756 |
struct Curl_easy *data = conn->data; |
| 757 |
struct auth *authhost; |
| 758 |
struct auth *authproxy; |
| 759 |
|
| 760 |
DEBUGASSERT(data); |
| 761 |
|
| 762 |
authhost = &data->state.authhost; |
| 763 |
authproxy = &data->state.authproxy; |
| 764 |
|
| 765 |
if((conn->bits.httpproxy && conn->bits.proxy_user_passwd) || |
| 766 |
conn->bits.user_passwd || data->set.str[STRING_BEARER]) |
| 767 |
/* continue please */; |
| 768 |
else { |
| 769 |
authhost->done = TRUE; |
| 770 |
authproxy->done = TRUE; |
| 771 |
return CURLE_OK; /* no authentication with no user or password */ |
| 772 |
} |
| 773 |
|
| 774 |
if(authhost->want && !authhost->picked) |
| 775 |
/* The app has selected one or more methods, but none has been picked |
| 776 |
so far by a server round-trip. Then we set the picked one to the |
| 777 |
want one, and if this is one single bit it'll be used instantly. */ |
| 778 |
authhost->picked = authhost->want; |
| 779 |
|
| 780 |
if(authproxy->want && !authproxy->picked) |
| 781 |
/* The app has selected one or more methods, but none has been picked so |
| 782 |
far by a proxy round-trip. Then we set the picked one to the want one, |
| 783 |
and if this is one single bit it'll be used instantly. */ |
| 784 |
authproxy->picked = authproxy->want; |
| 785 |
|
| 786 |
#ifndef CURL_DISABLE_PROXY |
| 787 |
/* Send proxy authentication header if needed */ |
| 788 |
if(conn->bits.httpproxy && |
| 789 |
(conn->bits.tunnel_proxy == (bit)proxytunnel)) { |
| 790 |
result = output_auth_headers(conn, authproxy, request, path, TRUE); |
| 791 |
if(result) |
| 792 |
return result; |
| 793 |
} |
| 794 |
else |
| 795 |
#else |
| 796 |
(void)proxytunnel; |
| 797 |
#endif /* CURL_DISABLE_PROXY */ |
| 798 |
/* we have no proxy so let's pretend we're done authenticating |
| 799 |
with it */ |
| 800 |
authproxy->done = TRUE; |
| 801 |
|
| 802 |
/* To prevent the user+password to get sent to other than the original |
| 803 |
host due to a location-follow, we do some weirdo checks here */ |
| 804 |
if(!data->state.this_is_a_follow || |
| 805 |
conn->bits.netrc || |
| 806 |
!data->state.first_host || |
| 807 |
data->set.allow_auth_to_other_hosts || |
| 808 |
strcasecompare(data->state.first_host, conn->host.name)) { |
| 809 |
result = output_auth_headers(conn, authhost, request, path, FALSE); |
| 810 |
} |
| 811 |
else |
| 812 |
authhost->done = TRUE; |
| 813 |
|
| 814 |
return result; |
| 815 |
} |
| 816 |
|
| 817 |
#else |
| 818 |
/* when disabled */ |
| 819 |
CURLcode |
| 820 |
Curl_http_output_auth(struct connectdata *conn, |
| 821 |
const char *request, |
| 822 |
const char *path, |
| 823 |
bool proxytunnel) |
| 824 |
{ |
| 825 |
(void)conn; |
| 826 |
(void)request; |
| 827 |
(void)path; |
| 828 |
(void)proxytunnel; |
| 829 |
return CURLE_OK; |
| 830 |
} |
| 831 |
#endif |
| 832 |
|
| 833 |
/* |
| 834 |
* Curl_http_input_auth() deals with Proxy-Authenticate: and WWW-Authenticate: |
| 835 |
* headers. They are dealt with both in the transfer.c main loop and in the |
| 836 |
* proxy CONNECT loop. |
| 837 |
*/ |
| 838 |
|
| 839 |
CURLcode Curl_http_input_auth(struct connectdata *conn, bool proxy, |
| 840 |
const char *auth) /* the first non-space */ |
| 841 |
{ |
| 842 |
/* |
| 843 |
* This resource requires authentication |
| 844 |
*/ |
| 845 |
struct Curl_easy *data = conn->data; |
| 846 |
|
| 847 |
#ifdef USE_SPNEGO |
| 848 |
curlnegotiate *negstate = proxy ? &conn->proxy_negotiate_state : |
| 849 |
&conn->http_negotiate_state; |
| 850 |
#endif |
| 851 |
unsigned long *availp; |
| 852 |
struct auth *authp; |
| 853 |
|
| 854 |
if(proxy) { |
| 855 |
availp = &data->info.proxyauthavail; |
| 856 |
authp = &data->state.authproxy; |
| 857 |
} |
| 858 |
else { |
| 859 |
availp = &data->info.httpauthavail; |
| 860 |
authp = &data->state.authhost; |
| 861 |
} |
| 862 |
|
| 863 |
/* |
| 864 |
* Here we check if we want the specific single authentication (using ==) and |
| 865 |
* if we do, we initiate usage of it. |
| 866 |
* |
| 867 |
* If the provided authentication is wanted as one out of several accepted |
| 868 |
* types (using &), we OR this authentication type to the authavail |
| 869 |
* variable. |
| 870 |
* |
| 871 |
* Note: |
| 872 |
* |
| 873 |
* ->picked is first set to the 'want' value (one or more bits) before the |
| 874 |
* request is sent, and then it is again set _after_ all response 401/407 |
| 875 |
* headers have been received but then only to a single preferred method |
| 876 |
* (bit). |
| 877 |
*/ |
| 878 |
|
| 879 |
while(*auth) { |
| 880 |
#ifdef USE_SPNEGO |
| 881 |
if(checkprefix("Negotiate", auth)) { |
| 882 |
if((authp->avail & CURLAUTH_NEGOTIATE) || |
| 883 |
Curl_auth_is_spnego_supported()) { |
| 884 |
*availp |= CURLAUTH_NEGOTIATE; |
| 885 |
authp->avail |= CURLAUTH_NEGOTIATE; |
| 886 |
|
| 887 |
if(authp->picked == CURLAUTH_NEGOTIATE) { |
| 888 |
CURLcode result = Curl_input_negotiate(conn, proxy, auth); |
| 889 |
if(!result) { |
| 890 |
DEBUGASSERT(!data->req.newurl); |
| 891 |
data->req.newurl = strdup(data->change.url); |
| 892 |
if(!data->req.newurl) |
| 893 |
return CURLE_OUT_OF_MEMORY; |
| 894 |
data->state.authproblem = FALSE; |
| 895 |
/* we received a GSS auth token and we dealt with it fine */ |
| 896 |
*negstate = GSS_AUTHRECV; |
| 897 |
} |
| 898 |
else |
| 899 |
data->state.authproblem = TRUE; |
| 900 |
} |
| 901 |
} |
| 902 |
} |
| 903 |
else |
| 904 |
#endif |
| 905 |
#ifdef USE_NTLM |
| 906 |
/* NTLM support requires the SSL crypto libs */ |
| 907 |
if(checkprefix("NTLM", auth)) { |
| 908 |
if((authp->avail & CURLAUTH_NTLM) || |
| 909 |
(authp->avail & CURLAUTH_NTLM_WB) || |
| 910 |
Curl_auth_is_ntlm_supported()) { |
| 911 |
*availp |= CURLAUTH_NTLM; |
| 912 |
authp->avail |= CURLAUTH_NTLM; |
| 913 |
|
| 914 |
if(authp->picked == CURLAUTH_NTLM || |
| 915 |
authp->picked == CURLAUTH_NTLM_WB) { |
| 916 |
/* NTLM authentication is picked and activated */ |
| 917 |
CURLcode result = Curl_input_ntlm(conn, proxy, auth); |
| 918 |
if(!result) { |
| 919 |
data->state.authproblem = FALSE; |
| 920 |
#ifdef NTLM_WB_ENABLED |
| 921 |
if(authp->picked == CURLAUTH_NTLM_WB) { |
| 922 |
*availp &= ~CURLAUTH_NTLM; |
| 923 |
authp->avail &= ~CURLAUTH_NTLM; |
| 924 |
*availp |= CURLAUTH_NTLM_WB; |
| 925 |
authp->avail |= CURLAUTH_NTLM_WB; |
| 926 |
|
| 927 |
result = Curl_input_ntlm_wb(conn, proxy, auth); |
| 928 |
if(result) { |
| 929 |
infof(data, "Authentication problem. Ignoring this.\n"); |
| 930 |
data->state.authproblem = TRUE; |
| 931 |
} |
| 932 |
} |
| 933 |
#endif |
| 934 |
} |
| 935 |
else { |
| 936 |
infof(data, "Authentication problem. Ignoring this.\n"); |
| 937 |
data->state.authproblem = TRUE; |
| 938 |
} |
| 939 |
} |
| 940 |
} |
| 941 |
} |
| 942 |
else |
| 943 |
#endif |
| 944 |
#ifndef CURL_DISABLE_CRYPTO_AUTH |
| 945 |
if(checkprefix("Digest", auth)) { |
| 946 |
if((authp->avail & CURLAUTH_DIGEST) != 0) |
| 947 |
infof(data, "Ignoring duplicate digest auth header.\n"); |
| 948 |
else if(Curl_auth_is_digest_supported()) { |
| 949 |
CURLcode result; |
| 950 |
|
| 951 |
*availp |= CURLAUTH_DIGEST; |
| 952 |
authp->avail |= CURLAUTH_DIGEST; |
| 953 |
|
| 954 |
/* We call this function on input Digest headers even if Digest |
| 955 |
* authentication isn't activated yet, as we need to store the |
| 956 |
* incoming data from this header in case we are going to use |
| 957 |
* Digest */ |
| 958 |
result = Curl_input_digest(conn, proxy, auth); |
| 959 |
if(result) { |
| 960 |
infof(data, "Authentication problem. Ignoring this.\n"); |
| 961 |
data->state.authproblem = TRUE; |
| 962 |
} |
| 963 |
} |
| 964 |
} |
| 965 |
else |
| 966 |
#endif |
| 967 |
if(checkprefix("Basic", auth)) { |
| 968 |
*availp |= CURLAUTH_BASIC; |
| 969 |
authp->avail |= CURLAUTH_BASIC; |
| 970 |
if(authp->picked == CURLAUTH_BASIC) { |
| 971 |
/* We asked for Basic authentication but got a 40X back |
| 972 |
anyway, which basically means our name+password isn't |
| 973 |
valid. */ |
| 974 |
authp->avail = CURLAUTH_NONE; |
| 975 |
infof(data, "Authentication problem. Ignoring this.\n"); |
| 976 |
data->state.authproblem = TRUE; |
| 977 |
} |
| 978 |
} |
| 979 |
else |
| 980 |
if(checkprefix("Bearer", auth)) { |
| 981 |
*availp |= CURLAUTH_BEARER; |
| 982 |
authp->avail |= CURLAUTH_BEARER; |
| 983 |
if(authp->picked == CURLAUTH_BEARER) { |
| 984 |
/* We asked for Bearer authentication but got a 40X back |
| 985 |
anyway, which basically means our token isn't valid. */ |
| 986 |
authp->avail = CURLAUTH_NONE; |
| 987 |
infof(data, "Authentication problem. Ignoring this.\n"); |
| 988 |
data->state.authproblem = TRUE; |
| 989 |
} |
| 990 |
} |
| 991 |
|
| 992 |
/* there may be multiple methods on one line, so keep reading */ |
| 993 |
while(*auth && *auth != ',') /* read up to the next comma */ |
| 994 |
auth++; |
| 995 |
if(*auth == ',') /* if we're on a comma, skip it */ |
| 996 |
auth++; |
| 997 |
while(*auth && ISSPACE(*auth)) |
| 998 |
auth++; |
| 999 |
} |
| 1000 |
|
| 1001 |
return CURLE_OK; |
| 1002 |
} |
| 1003 |
|
| 1004 |
/** |
| 1005 |
* http_should_fail() determines whether an HTTP response has gotten us |
| 1006 |
* into an error state or not. |
| 1007 |
* |
| 1008 |
* @param conn all information about the current connection |
| 1009 |
* |
| 1010 |
* @retval 0 communications should continue |
| 1011 |
* |
| 1012 |
* @retval 1 communications should not continue |
| 1013 |
*/ |
| 1014 |
static int http_should_fail(struct connectdata *conn) |
| 1015 |
{ |
| 1016 |
struct Curl_easy *data; |
| 1017 |
int httpcode; |
| 1018 |
|
| 1019 |
DEBUGASSERT(conn); |
| 1020 |
data = conn->data; |
| 1021 |
DEBUGASSERT(data); |
| 1022 |
|
| 1023 |
httpcode = data->req.httpcode; |
| 1024 |
|
| 1025 |
/* |
| 1026 |
** If we haven't been asked to fail on error, |
| 1027 |
** don't fail. |
| 1028 |
*/ |
| 1029 |
if(!data->set.http_fail_on_error) |
| 1030 |
return 0; |
| 1031 |
|
| 1032 |
/* |
| 1033 |
** Any code < 400 is never terminal. |
| 1034 |
*/ |
| 1035 |
if(httpcode < 400) |
| 1036 |
return 0; |
| 1037 |
|
| 1038 |
/* |
| 1039 |
** Any code >= 400 that's not 401 or 407 is always |
| 1040 |
** a terminal error |
| 1041 |
*/ |
| 1042 |
if((httpcode != 401) && (httpcode != 407)) |
| 1043 |
return 1; |
| 1044 |
|
| 1045 |
/* |
| 1046 |
** All we have left to deal with is 401 and 407 |
| 1047 |
*/ |
| 1048 |
DEBUGASSERT((httpcode == 401) || (httpcode == 407)); |
| 1049 |
|
| 1050 |
/* |
| 1051 |
** Examine the current authentication state to see if this |
| 1052 |
** is an error. The idea is for this function to get |
| 1053 |
** called after processing all the headers in a response |
| 1054 |
** message. So, if we've been to asked to authenticate a |
| 1055 |
** particular stage, and we've done it, we're OK. But, if |
| 1056 |
** we're already completely authenticated, it's not OK to |
| 1057 |
** get another 401 or 407. |
| 1058 |
** |
| 1059 |
** It is possible for authentication to go stale such that |
| 1060 |
** the client needs to reauthenticate. Once that info is |
| 1061 |
** available, use it here. |
| 1062 |
*/ |
| 1063 |
|
| 1064 |
/* |
| 1065 |
** Either we're not authenticating, or we're supposed to |
| 1066 |
** be authenticating something else. This is an error. |
| 1067 |
*/ |
| 1068 |
if((httpcode == 401) && !conn->bits.user_passwd) |
| 1069 |
return TRUE; |
| 1070 |
if((httpcode == 407) && !conn->bits.proxy_user_passwd) |
| 1071 |
return TRUE; |
| 1072 |
|
| 1073 |
return data->state.authproblem; |
| 1074 |
} |
| 1075 |
|
| 1076 |
/* |
| 1077 |
* readmoredata() is a "fread() emulation" to provide POST and/or request |
| 1078 |
* data. It is used when a huge POST is to be made and the entire chunk wasn't |
| 1079 |
* sent in the first send(). This function will then be called from the |
| 1080 |
* transfer.c loop when more data is to be sent to the peer. |
| 1081 |
* |
| 1082 |
* Returns the amount of bytes it filled the buffer with. |
| 1083 |
*/ |
| 1084 |
static size_t readmoredata(char *buffer, |
| 1085 |
size_t size, |
| 1086 |
size_t nitems, |
| 1087 |
void *userp) |
| 1088 |
{ |
| 1089 |
struct connectdata *conn = (struct connectdata *)userp; |
| 1090 |
struct HTTP *http = conn->data->req.protop; |
| 1091 |
size_t fullsize = size * nitems; |
| 1092 |
|
| 1093 |
if(!http->postsize) |
| 1094 |
/* nothing to return */ |
| 1095 |
return 0; |
| 1096 |
|
| 1097 |
/* make sure that a HTTP request is never sent away chunked! */ |
| 1098 |
conn->data->req.forbidchunk = (http->sending == HTTPSEND_REQUEST)?TRUE:FALSE; |
| 1099 |
|
| 1100 |
if(http->postsize <= (curl_off_t)fullsize) { |
| 1101 |
memcpy(buffer, http->postdata, (size_t)http->postsize); |
| 1102 |
fullsize = (size_t)http->postsize; |
| 1103 |
|
| 1104 |
if(http->backup.postsize) { |
| 1105 |
/* move backup data into focus and continue on that */ |
| 1106 |
http->postdata = http->backup.postdata; |
| 1107 |
http->postsize = http->backup.postsize; |
| 1108 |
conn->data->state.fread_func = http->backup.fread_func; |
| 1109 |
conn->data->state.in = http->backup.fread_in; |
| 1110 |
|
| 1111 |
http->sending++; /* move one step up */ |
| 1112 |
|
| 1113 |
http->backup.postsize = 0; |
| 1114 |
} |
| 1115 |
else |
| 1116 |
http->postsize = 0; |
| 1117 |
|
| 1118 |
return fullsize; |
| 1119 |
} |
| 1120 |
|
| 1121 |
memcpy(buffer, http->postdata, fullsize); |
| 1122 |
http->postdata += fullsize; |
| 1123 |
http->postsize -= fullsize; |
| 1124 |
|
| 1125 |
return fullsize; |
| 1126 |
} |
| 1127 |
|
| 1128 |
/* ------------------------------------------------------------------------- */ |
| 1129 |
/* add_buffer functions */ |
| 1130 |
|
| 1131 |
/* |
| 1132 |
* Curl_add_buffer_init() sets up and returns a fine buffer struct |
| 1133 |
*/ |
| 1134 |
Curl_send_buffer *Curl_add_buffer_init(void) |
| 1135 |
{ |
| 1136 |
return calloc(1, sizeof(Curl_send_buffer)); |
| 1137 |
} |
| 1138 |
|
| 1139 |
/* |
| 1140 |
* Curl_add_buffer_free() frees all associated resources. |
| 1141 |
*/ |
| 1142 |
void Curl_add_buffer_free(Curl_send_buffer **inp) |
| 1143 |
{ |
| 1144 |
Curl_send_buffer *in; |
| 1145 |
if(!inp) |
| 1146 |
return; |
| 1147 |
in = *inp; |
| 1148 |
if(in) { /* deal with NULL input */ |
| 1149 |
free(in->buffer); |
| 1150 |
free(in); |
| 1151 |
} |
| 1152 |
*inp = NULL; |
| 1153 |
} |
| 1154 |
|
| 1155 |
/* |
| 1156 |
* Curl_add_buffer_send() sends a header buffer and frees all associated |
| 1157 |
* memory. Body data may be appended to the header data if desired. |
| 1158 |
* |
| 1159 |
* Returns CURLcode |
| 1160 |
*/ |
| 1161 |
CURLcode Curl_add_buffer_send(Curl_send_buffer **inp, |
| 1162 |
struct connectdata *conn, |
| 1163 |
|
| 1164 |
/* add the number of sent bytes to this |
| 1165 |
counter */ |
| 1166 |
curl_off_t *bytes_written, |
| 1167 |
|
| 1168 |
/* how much of the buffer contains body data */ |
| 1169 |
size_t included_body_bytes, |
| 1170 |
int socketindex) |
| 1171 |
{ |
| 1172 |
ssize_t amount; |
| 1173 |
CURLcode result; |
| 1174 |
char *ptr; |
| 1175 |
size_t size; |
| 1176 |
struct Curl_easy *data = conn->data; |
| 1177 |
struct HTTP *http = data->req.protop; |
| 1178 |
size_t sendsize; |
| 1179 |
curl_socket_t sockfd; |
| 1180 |
size_t headersize; |
| 1181 |
Curl_send_buffer *in = *inp; |
| 1182 |
|
| 1183 |
DEBUGASSERT(socketindex <= SECONDARYSOCKET); |
| 1184 |
|
| 1185 |
sockfd = conn->sock[socketindex]; |
| 1186 |
|
| 1187 |
/* The looping below is required since we use non-blocking sockets, but due |
| 1188 |
to the circumstances we will just loop and try again and again etc */ |
| 1189 |
|
| 1190 |
ptr = in->buffer; |
| 1191 |
size = in->size_used; |
| 1192 |
|
| 1193 |
headersize = size - included_body_bytes; /* the initial part that isn't body |
| 1194 |
is header */ |
| 1195 |
|
| 1196 |
DEBUGASSERT(size > included_body_bytes); |
| 1197 |
|
| 1198 |
result = Curl_convert_to_network(data, ptr, headersize); |
| 1199 |
/* Curl_convert_to_network calls failf if unsuccessful */ |
| 1200 |
if(result) { |
| 1201 |
/* conversion failed, free memory and return to the caller */ |
| 1202 |
Curl_add_buffer_free(inp); |
| 1203 |
return result; |
| 1204 |
} |
| 1205 |
|
| 1206 |
if((conn->handler->flags & PROTOPT_SSL || |
| 1207 |
conn->http_proxy.proxytype == CURLPROXY_HTTPS) |
| 1208 |
&& conn->httpversion != 20) { |
| 1209 |
/* We never send more than CURL_MAX_WRITE_SIZE bytes in one single chunk |
| 1210 |
when we speak HTTPS, as if only a fraction of it is sent now, this data |
| 1211 |
needs to fit into the normal read-callback buffer later on and that |
| 1212 |
buffer is using this size. |
| 1213 |
*/ |
| 1214 |
|
| 1215 |
sendsize = CURLMIN(size, CURL_MAX_WRITE_SIZE); |
| 1216 |
|
| 1217 |
/* OpenSSL is very picky and we must send the SAME buffer pointer to the |
| 1218 |
library when we attempt to re-send this buffer. Sending the same data |
| 1219 |
is not enough, we must use the exact same address. For this reason, we |
| 1220 |
must copy the data to the uploadbuffer first, since that is the buffer |
| 1221 |
we will be using if this send is retried later. |
| 1222 |
*/ |
| 1223 |
result = Curl_get_upload_buffer(data); |
| 1224 |
if(result) { |
| 1225 |
/* malloc failed, free memory and return to the caller */ |
| 1226 |
Curl_add_buffer_free(&in); |
| 1227 |
return result; |
| 1228 |
} |
| 1229 |
memcpy(data->state.ulbuf, ptr, sendsize); |
| 1230 |
ptr = data->state.ulbuf; |
| 1231 |
} |
| 1232 |
else |
| 1233 |
sendsize = size; |
| 1234 |
|
| 1235 |
result = Curl_write(conn, sockfd, ptr, sendsize, &amount); |
| 1236 |
|
| 1237 |
if(!result) { |
| 1238 |
/* |
| 1239 |
* Note that we may not send the entire chunk at once, and we have a set |
| 1240 |
* number of data bytes at the end of the big buffer (out of which we may |
| 1241 |
* only send away a part). |
| 1242 |
*/ |
| 1243 |
/* how much of the header that was sent */ |
| 1244 |
size_t headlen = (size_t)amount>headersize ? headersize : (size_t)amount; |
| 1245 |
size_t bodylen = amount - headlen; |
| 1246 |
|
| 1247 |
if(data->set.verbose) { |
| 1248 |
/* this data _may_ contain binary stuff */ |
| 1249 |
Curl_debug(data, CURLINFO_HEADER_OUT, ptr, headlen); |
| 1250 |
if(bodylen) { |
| 1251 |
/* there was body data sent beyond the initial header part, pass that |
| 1252 |
on to the debug callback too */ |
| 1253 |
Curl_debug(data, CURLINFO_DATA_OUT, |
| 1254 |
ptr + headlen, bodylen); |
| 1255 |
} |
| 1256 |
} |
| 1257 |
|
| 1258 |
/* 'amount' can never be a very large value here so typecasting it so a |
| 1259 |
signed 31 bit value should not cause problems even if ssize_t is |
| 1260 |
64bit */ |
| 1261 |
*bytes_written += (long)amount; |
| 1262 |
|
| 1263 |
if(http) { |
| 1264 |
/* if we sent a piece of the body here, up the byte counter for it |
| 1265 |
accordingly */ |
| 1266 |
data->req.writebytecount += bodylen; |
| 1267 |
Curl_pgrsSetUploadCounter(data, data->req.writebytecount); |
| 1268 |
|
| 1269 |
if((size_t)amount != size) { |
| 1270 |
/* The whole request could not be sent in one system call. We must |
| 1271 |
queue it up and send it later when we get the chance. We must not |
| 1272 |
loop here and wait until it might work again. */ |
| 1273 |
|
| 1274 |
size -= amount; |
| 1275 |
|
| 1276 |
ptr = in->buffer + amount; |
| 1277 |
|
| 1278 |
/* backup the currently set pointers */ |
| 1279 |
http->backup.fread_func = data->state.fread_func; |
| 1280 |
http->backup.fread_in = data->state.in; |
| 1281 |
http->backup.postdata = http->postdata; |
| 1282 |
http->backup.postsize = http->postsize; |
| 1283 |
|
| 1284 |
/* set the new pointers for the request-sending */ |
| 1285 |
data->state.fread_func = (curl_read_callback)readmoredata; |
| 1286 |
data->state.in = (void *)conn; |
| 1287 |
http->postdata = ptr; |
| 1288 |
http->postsize = (curl_off_t)size; |
| 1289 |
|
| 1290 |
http->send_buffer = in; |
| 1291 |
http->sending = HTTPSEND_REQUEST; |
| 1292 |
|
| 1293 |
return CURLE_OK; |
| 1294 |
} |
| 1295 |
http->sending = HTTPSEND_BODY; |
| 1296 |
/* the full buffer was sent, clean up and return */ |
| 1297 |
} |
| 1298 |
else { |
| 1299 |
if((size_t)amount != size) |
| 1300 |
/* We have no continue-send mechanism now, fail. This can only happen |
| 1301 |
when this function is used from the CONNECT sending function. We |
| 1302 |
currently (stupidly) assume that the whole request is always sent |
| 1303 |
away in the first single chunk. |
| 1304 |
|
| 1305 |
This needs FIXing. |
| 1306 |
*/ |
| 1307 |
return CURLE_SEND_ERROR; |
| 1308 |
} |
| 1309 |
} |
| 1310 |
Curl_add_buffer_free(&in); |
| 1311 |
|
| 1312 |
return result; |
| 1313 |
} |
| 1314 |
|
| 1315 |
|
| 1316 |
/* |
| 1317 |
* add_bufferf() add the formatted input to the buffer. |
| 1318 |
*/ |
| 1319 |
CURLcode Curl_add_bufferf(Curl_send_buffer **inp, const char *fmt, ...) |
| 1320 |
{ |
| 1321 |
char *s; |
| 1322 |
va_list ap; |
| 1323 |
Curl_send_buffer *in = *inp; |
| 1324 |
va_start(ap, fmt); |
| 1325 |
s = vaprintf(fmt, ap); /* this allocs a new string to append */ |
| 1326 |
va_end(ap); |
| 1327 |
|
| 1328 |
if(s) { |
| 1329 |
CURLcode result = Curl_add_buffer(inp, s, strlen(s)); |
| 1330 |
free(s); |
| 1331 |
return result; |
| 1332 |
} |
| 1333 |
/* If we failed, we cleanup the whole buffer and return error */ |
| 1334 |
free(in->buffer); |
| 1335 |
free(in); |
| 1336 |
*inp = NULL; |
| 1337 |
return CURLE_OUT_OF_MEMORY; |
| 1338 |
} |
| 1339 |
|
| 1340 |
/* |
| 1341 |
* Curl_add_buffer() appends a memory chunk to the existing buffer |
| 1342 |
*/ |
| 1343 |
CURLcode Curl_add_buffer(Curl_send_buffer **inp, const void *inptr, |
| 1344 |
size_t size) |
| 1345 |
{ |
| 1346 |
char *new_rb; |
| 1347 |
Curl_send_buffer *in = *inp; |
| 1348 |
|
| 1349 |
if(~size < in->size_used) { |
| 1350 |
/* If resulting used size of send buffer would wrap size_t, cleanup |
| 1351 |
the whole buffer and return error. Otherwise the required buffer |
| 1352 |
size will fit into a single allocatable memory chunk */ |
| 1353 |
Curl_safefree(in->buffer); |
| 1354 |
free(in); |
| 1355 |
*inp = NULL; |
| 1356 |
return CURLE_OUT_OF_MEMORY; |
| 1357 |
} |
| 1358 |
|
| 1359 |
if(!in->buffer || |
| 1360 |
((in->size_used + size) > (in->size_max - 1))) { |
| 1361 |
/* If current buffer size isn't enough to hold the result, use a |
| 1362 |
buffer size that doubles the required size. If this new size |
| 1363 |
would wrap size_t, then just use the largest possible one */ |
| 1364 |
size_t new_size; |
| 1365 |
|
| 1366 |
if((size > (size_t)-1 / 2) || (in->size_used > (size_t)-1 / 2) || |
| 1367 |
(~(size * 2) < (in->size_used * 2))) |
| 1368 |
new_size = (size_t)-1; |
| 1369 |
else |
| 1370 |
new_size = (in->size_used + size) * 2; |
| 1371 |
|
| 1372 |
if(in->buffer) |
| 1373 |
/* we have a buffer, enlarge the existing one */ |
| 1374 |
new_rb = Curl_saferealloc(in->buffer, new_size); |
| 1375 |
else |
| 1376 |
/* create a new buffer */ |
| 1377 |
new_rb = malloc(new_size); |
| 1378 |
|
| 1379 |
if(!new_rb) { |
| 1380 |
/* If we failed, we cleanup the whole buffer and return error */ |
| 1381 |
free(in); |
| 1382 |
*inp = NULL; |
| 1383 |
return CURLE_OUT_OF_MEMORY; |
| 1384 |
} |
| 1385 |
|
| 1386 |
in->buffer = new_rb; |
| 1387 |
in->size_max = new_size; |
| 1388 |
} |
| 1389 |
memcpy(&in->buffer[in->size_used], inptr, size); |
| 1390 |
|
| 1391 |
in->size_used += size; |
| 1392 |
|
| 1393 |
return CURLE_OK; |
| 1394 |
} |
| 1395 |
|
| 1396 |
/* end of the add_buffer functions */ |
| 1397 |
/* ------------------------------------------------------------------------- */ |
| 1398 |
|
| 1399 |
|
| 1400 |
|
| 1401 |
/* |
| 1402 |
* Curl_compareheader() |
| 1403 |
* |
| 1404 |
* Returns TRUE if 'headerline' contains the 'header' with given 'content'. |
| 1405 |
* Pass headers WITH the colon. |
| 1406 |
*/ |
| 1407 |
bool |
| 1408 |
Curl_compareheader(const char *headerline, /* line to check */ |
| 1409 |
const char *header, /* header keyword _with_ colon */ |
| 1410 |
const char *content) /* content string to find */ |
| 1411 |
{ |
| 1412 |
/* RFC2616, section 4.2 says: "Each header field consists of a name followed |
| 1413 |
* by a colon (":") and the field value. Field names are case-insensitive. |
| 1414 |
* The field value MAY be preceded by any amount of LWS, though a single SP |
| 1415 |
* is preferred." */ |
| 1416 |
|
| 1417 |
size_t hlen = strlen(header); |
| 1418 |
size_t clen; |
| 1419 |
size_t len; |
| 1420 |
const char *start; |
| 1421 |
const char *end; |
| 1422 |
|
| 1423 |
if(!strncasecompare(headerline, header, hlen)) |
| 1424 |
return FALSE; /* doesn't start with header */ |
| 1425 |
|
| 1426 |
/* pass the header */ |
| 1427 |
start = &headerline[hlen]; |
| 1428 |
|
| 1429 |
/* pass all white spaces */ |
| 1430 |
while(*start && ISSPACE(*start)) |
| 1431 |
start++; |
| 1432 |
|
| 1433 |
/* find the end of the header line */ |
| 1434 |
end = strchr(start, '\r'); /* lines end with CRLF */ |
| 1435 |
if(!end) { |
| 1436 |
/* in case there's a non-standard compliant line here */ |
| 1437 |
end = strchr(start, '\n'); |
| 1438 |
|
| 1439 |
if(!end) |
| 1440 |
/* hm, there's no line ending here, use the zero byte! */ |
| 1441 |
end = strchr(start, '\0'); |
| 1442 |
} |
| 1443 |
|
| 1444 |
len = end-start; /* length of the content part of the input line */ |
| 1445 |
clen = strlen(content); /* length of the word to find */ |
| 1446 |
|
| 1447 |
/* find the content string in the rest of the line */ |
| 1448 |
for(; len >= clen; len--, start++) { |
| 1449 |
if(strncasecompare(start, content, clen)) |
| 1450 |
return TRUE; /* match! */ |
| 1451 |
} |
| 1452 |
|
| 1453 |
return FALSE; /* no match */ |
| 1454 |
} |
| 1455 |
|
| 1456 |
/* |
| 1457 |
* Curl_http_connect() performs HTTP stuff to do at connect-time, called from |
| 1458 |
* the generic Curl_connect(). |
| 1459 |
*/ |
| 1460 |
CURLcode Curl_http_connect(struct connectdata *conn, bool *done) |
| 1461 |
{ |
| 1462 |
CURLcode result; |
| 1463 |
|
| 1464 |
/* We default to persistent connections. We set this already in this connect |
| 1465 |
function to make the re-use checks properly be able to check this bit. */ |
| 1466 |
connkeep(conn, "HTTP default"); |
| 1467 |
|
| 1468 |
/* the CONNECT procedure might not have been completed */ |
| 1469 |
result = Curl_proxy_connect(conn, FIRSTSOCKET); |
| 1470 |
if(result) |
| 1471 |
return result; |
| 1472 |
|
| 1473 |
if(conn->bits.proxy_connect_closed) |
| 1474 |
/* this is not an error, just part of the connection negotiation */ |
| 1475 |
return CURLE_OK; |
| 1476 |
|
| 1477 |
if(CONNECT_FIRSTSOCKET_PROXY_SSL()) |
| 1478 |
return CURLE_OK; /* wait for HTTPS proxy SSL initialization to complete */ |
| 1479 |
|
| 1480 |
if(Curl_connect_ongoing(conn)) |
| 1481 |
/* nothing else to do except wait right now - we're not done here. */ |
| 1482 |
return CURLE_OK; |
| 1483 |
|
| 1484 |
#ifndef CURL_DISABLE_PROXY |
| 1485 |
if(conn->data->set.haproxyprotocol) { |
| 1486 |
/* add HAProxy PROXY protocol header */ |
| 1487 |
result = add_haproxy_protocol_header(conn); |
| 1488 |
if(result) |
| 1489 |
return result; |
| 1490 |
} |
| 1491 |
#endif |
| 1492 |
|
| 1493 |
if(conn->given->protocol & CURLPROTO_HTTPS) { |
| 1494 |
/* perform SSL initialization */ |
| 1495 |
result = https_connecting(conn, done); |
| 1496 |
if(result) |
| 1497 |
return result; |
| 1498 |
} |
| 1499 |
else |
| 1500 |
*done = TRUE; |
| 1501 |
|
| 1502 |
return CURLE_OK; |
| 1503 |
} |
| 1504 |
|
| 1505 |
/* this returns the socket to wait for in the DO and DOING state for the multi |
| 1506 |
interface and then we're always _sending_ a request and thus we wait for |
| 1507 |
the single socket to become writable only */ |
| 1508 |
static int http_getsock_do(struct connectdata *conn, |
| 1509 |
curl_socket_t *socks) |
| 1510 |
{ |
| 1511 |
/* write mode */ |
| 1512 |
socks[0] = conn->sock[FIRSTSOCKET]; |
| 1513 |
return GETSOCK_WRITESOCK(0); |
| 1514 |
} |
| 1515 |
|
| 1516 |
#ifndef CURL_DISABLE_PROXY |
| 1517 |
static CURLcode add_haproxy_protocol_header(struct connectdata *conn) |
| 1518 |
{ |
| 1519 |
char proxy_header[128]; |
| 1520 |
Curl_send_buffer *req_buffer; |
| 1521 |
CURLcode result; |
| 1522 |
char tcp_version[5]; |
| 1523 |
|
| 1524 |
/* Emit the correct prefix for IPv6 */ |
| 1525 |
if(conn->bits.ipv6) { |
| 1526 |
strcpy(tcp_version, "TCP6"); |
| 1527 |
} |
| 1528 |
else { |
| 1529 |
strcpy(tcp_version, "TCP4"); |
| 1530 |
} |
| 1531 |
|
| 1532 |
msnprintf(proxy_header, |
| 1533 |
sizeof(proxy_header), |
| 1534 |
"PROXY %s %s %s %li %li\r\n", |
| 1535 |
tcp_version, |
| 1536 |
conn->data->info.conn_local_ip, |
| 1537 |
conn->data->info.conn_primary_ip, |
| 1538 |
conn->data->info.conn_local_port, |
| 1539 |
conn->data->info.conn_primary_port); |
| 1540 |
|
| 1541 |
req_buffer = Curl_add_buffer_init(); |
| 1542 |
if(!req_buffer) |
| 1543 |
return CURLE_OUT_OF_MEMORY; |
| 1544 |
|
| 1545 |
result = Curl_add_bufferf(&req_buffer, proxy_header); |
| 1546 |
if(result) |
| 1547 |
return result; |
| 1548 |
|
| 1549 |
result = Curl_add_buffer_send(&req_buffer, |
| 1550 |
conn, |
| 1551 |
&conn->data->info.request_size, |
| 1552 |
0, |
| 1553 |
FIRSTSOCKET); |
| 1554 |
|
| 1555 |
return result; |
| 1556 |
} |
| 1557 |
#endif |
| 1558 |
|
| 1559 |
#ifdef USE_SSL |
| 1560 |
static CURLcode https_connecting(struct connectdata *conn, bool *done) |
| 1561 |
{ |
| 1562 |
CURLcode result; |
| 1563 |
DEBUGASSERT((conn) && (conn->handler->flags & PROTOPT_SSL)); |
| 1564 |
|
| 1565 |
#ifdef ENABLE_QUIC |
| 1566 |
if(conn->transport == TRNSPRT_QUIC) { |
| 1567 |
*done = TRUE; |
| 1568 |
return CURLE_OK; |
| 1569 |
} |
| 1570 |
#endif |
| 1571 |
|
| 1572 |
/* perform SSL initialization for this socket */ |
| 1573 |
result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, done); |
| 1574 |
if(result) |
| 1575 |
connclose(conn, "Failed HTTPS connection"); |
| 1576 |
|
| 1577 |
return result; |
| 1578 |
} |
| 1579 |
|
| 1580 |
static int https_getsock(struct connectdata *conn, |
| 1581 |
curl_socket_t *socks) |
| 1582 |
{ |
| 1583 |
if(conn->handler->flags & PROTOPT_SSL) |
| 1584 |
return Curl_ssl_getsock(conn, socks); |
| 1585 |
return GETSOCK_BLANK; |
| 1586 |
} |
| 1587 |
#endif /* USE_SSL */ |
| 1588 |
|
| 1589 |
/* |
| 1590 |
* Curl_http_done() gets called after a single HTTP request has been |
| 1591 |
* performed. |
| 1592 |
*/ |
| 1593 |
|
| 1594 |
CURLcode Curl_http_done(struct connectdata *conn, |
| 1595 |
CURLcode status, bool premature) |
| 1596 |
{ |
| 1597 |
struct Curl_easy *data = conn->data; |
| 1598 |
struct HTTP *http = data->req.protop; |
| 1599 |
|
| 1600 |
/* Clear multipass flag. If authentication isn't done yet, then it will get |
| 1601 |
* a chance to be set back to true when we output the next auth header */ |
| 1602 |
data->state.authhost.multipass = FALSE; |
| 1603 |
data->state.authproxy.multipass = FALSE; |
| 1604 |
|
| 1605 |
Curl_unencode_cleanup(conn); |
| 1606 |
|
| 1607 |
/* set the proper values (possibly modified on POST) */ |
| 1608 |
conn->seek_func = data->set.seek_func; /* restore */ |
| 1609 |
conn->seek_client = data->set.seek_client; /* restore */ |
| 1610 |
|
| 1611 |
if(!http) |
| 1612 |
return CURLE_OK; |
| 1613 |
|
| 1614 |
if(http->send_buffer) { |
| 1615 |
Curl_add_buffer_free(&http->send_buffer); |
| 1616 |
} |
| 1617 |
|
| 1618 |
Curl_http2_done(data, premature); |
| 1619 |
Curl_quic_done(data, premature); |
| 1620 |
|
| 1621 |
Curl_mime_cleanpart(&http->form); |
| 1622 |
|
| 1623 |
if(status) |
| 1624 |
return status; |
| 1625 |
|
| 1626 |
if(!premature && /* this check is pointless when DONE is called before the |
| 1627 |
entire operation is complete */ |
| 1628 |
!conn->bits.retry && |
| 1629 |
!data->set.connect_only && |
| 1630 |
(data->req.bytecount + |
| 1631 |
data->req.headerbytecount - |
| 1632 |
data->req.deductheadercount) <= 0) { |
| 1633 |
/* If this connection isn't simply closed to be retried, AND nothing was |
| 1634 |
read from the HTTP server (that counts), this can't be right so we |
| 1635 |
return an error here */ |
| 1636 |
failf(data, "Empty reply from server"); |
| 1637 |
return CURLE_GOT_NOTHING; |
| 1638 |
} |
| 1639 |
|
| 1640 |
return CURLE_OK; |
| 1641 |
} |
| 1642 |
|
| 1643 |
/* |
| 1644 |
* Determine if we should use HTTP 1.1 (OR BETTER) for this request. Reasons |
| 1645 |
* to avoid it include: |
| 1646 |
* |
| 1647 |
* - if the user specifically requested HTTP 1.0 |
| 1648 |
* - if the server we are connected to only supports 1.0 |
| 1649 |
* - if any server previously contacted to handle this request only supports |
| 1650 |
* 1.0. |
| 1651 |
*/ |
| 1652 |
static bool use_http_1_1plus(const struct Curl_easy *data, |
| 1653 |
const struct connectdata *conn) |
| 1654 |
{ |
| 1655 |
if((data->state.httpversion == 10) || (conn->httpversion == 10)) |
| 1656 |
return FALSE; |
| 1657 |
if((data->set.httpversion == CURL_HTTP_VERSION_1_0) && |
| 1658 |
(conn->httpversion <= 10)) |
| 1659 |
return FALSE; |
| 1660 |
return ((data->set.httpversion == CURL_HTTP_VERSION_NONE) || |
| 1661 |
(data->set.httpversion >= CURL_HTTP_VERSION_1_1)); |
| 1662 |
} |
| 1663 |
|
| 1664 |
static const char *get_http_string(const struct Curl_easy *data, |
| 1665 |
const struct connectdata *conn) |
| 1666 |
{ |
| 1667 |
#ifdef ENABLE_QUIC |
| 1668 |
if((data->set.httpversion == CURL_HTTP_VERSION_3) || |
| 1669 |
(conn->httpversion == 30)) |
| 1670 |
return "3"; |
| 1671 |
#endif |
| 1672 |
|
| 1673 |
#ifdef USE_NGHTTP2 |
| 1674 |
if(conn->proto.httpc.h2) |
| 1675 |
return "2"; |
| 1676 |
#endif |
| 1677 |
|
| 1678 |
if(use_http_1_1plus(data, conn)) |
| 1679 |
return "1.1"; |
| 1680 |
|
| 1681 |
return "1.0"; |
| 1682 |
} |
| 1683 |
|
| 1684 |
/* check and possibly add an Expect: header */ |
| 1685 |
static CURLcode expect100(struct Curl_easy *data, |
| 1686 |
struct connectdata *conn, |
| 1687 |
Curl_send_buffer *req_buffer) |
| 1688 |
{ |
| 1689 |
CURLcode result = CURLE_OK; |
| 1690 |
data->state.expect100header = FALSE; /* default to false unless it is set |
| 1691 |
to TRUE below */ |
| 1692 |
if(!data->state.disableexpect && use_http_1_1plus(data, conn) && |
| 1693 |
(conn->httpversion < 20)) { |
| 1694 |
/* if not doing HTTP 1.0 or version 2, or disabled explicitly, we add an |
| 1695 |
Expect: 100-continue to the headers which actually speeds up post |
| 1696 |
operations (as there is one packet coming back from the web server) */ |
| 1697 |
const char *ptr = Curl_checkheaders(conn, "Expect"); |
| 1698 |
if(ptr) { |
| 1699 |
data->state.expect100header = |
| 1700 |
Curl_compareheader(ptr, "Expect:", "100-continue"); |
| 1701 |
} |
| 1702 |
else { |
| 1703 |
result = Curl_add_bufferf(&req_buffer, |
| 1704 |
"Expect: 100-continue\r\n"); |
| 1705 |
if(!result) |
| 1706 |
data->state.expect100header = TRUE; |
| 1707 |
} |
| 1708 |
} |
| 1709 |
|
| 1710 |
return result; |
| 1711 |
} |
| 1712 |
|
| 1713 |
enum proxy_use { |
| 1714 |
HEADER_SERVER, /* direct to server */ |
| 1715 |
HEADER_PROXY, /* regular request to proxy */ |
| 1716 |
HEADER_CONNECT /* sending CONNECT to a proxy */ |
| 1717 |
}; |
| 1718 |
|
| 1719 |
/* used to compile the provided trailers into one buffer |
| 1720 |
will return an error code if one of the headers is |
| 1721 |
not formatted correctly */ |
| 1722 |
CURLcode Curl_http_compile_trailers(struct curl_slist *trailers, |
| 1723 |
Curl_send_buffer **buffer, |
| 1724 |
struct Curl_easy *handle) |
| 1725 |
{ |
| 1726 |
char *ptr = NULL; |
| 1727 |
CURLcode result = CURLE_OK; |
| 1728 |
const char *endofline_native = NULL; |
| 1729 |
const char *endofline_network = NULL; |
| 1730 |
|
| 1731 |
if( |
| 1732 |
#ifdef CURL_DO_LINEEND_CONV |
| 1733 |
(handle->set.prefer_ascii) || |
| 1734 |
#endif |
| 1735 |
(handle->set.crlf)) { |
| 1736 |
/* \n will become \r\n later on */ |
| 1737 |
endofline_native = "\n"; |
| 1738 |
endofline_network = "\x0a"; |
| 1739 |
} |
| 1740 |
else { |
| 1741 |
endofline_native = "\r\n"; |
| 1742 |
endofline_network = "\x0d\x0a"; |
| 1743 |
} |
| 1744 |
|
| 1745 |
while(trailers) { |
| 1746 |
/* only add correctly formatted trailers */ |
| 1747 |
ptr = strchr(trailers->data, ':'); |
| 1748 |
if(ptr && *(ptr + 1) == ' ') { |
| 1749 |
result = Curl_add_bufferf(buffer, "%s%s", trailers->data, |
| 1750 |
endofline_native); |
| 1751 |
if(result) |
| 1752 |
return result; |
| 1753 |
} |
| 1754 |
else |
| 1755 |
infof(handle, "Malformatted trailing header ! Skipping trailer."); |
| 1756 |
trailers = trailers->next; |
| 1757 |
} |
| 1758 |
result = Curl_add_buffer(buffer, endofline_network, |
| 1759 |
strlen(endofline_network)); |
| 1760 |
return result; |
| 1761 |
} |
| 1762 |
|
| 1763 |
CURLcode Curl_add_custom_headers(struct connectdata *conn, |
| 1764 |
bool is_connect, |
| 1765 |
Curl_send_buffer *req_buffer) |
| 1766 |
{ |
| 1767 |
char *ptr; |
| 1768 |
struct curl_slist *h[2]; |
| 1769 |
struct curl_slist *headers; |
| 1770 |
int numlists = 1; /* by default */ |
| 1771 |
struct Curl_easy *data = conn->data; |
| 1772 |
int i; |
| 1773 |
|
| 1774 |
enum proxy_use proxy; |
| 1775 |
|
| 1776 |
if(is_connect) |
| 1777 |
proxy = HEADER_CONNECT; |
| 1778 |
else |
| 1779 |
proxy = conn->bits.httpproxy && !conn->bits.tunnel_proxy? |
| 1780 |
HEADER_PROXY:HEADER_SERVER; |
| 1781 |
|
| 1782 |
switch(proxy) { |
| 1783 |
case HEADER_SERVER: |
| 1784 |
h[0] = data->set.headers; |
| 1785 |
break; |
| 1786 |
case HEADER_PROXY: |
| 1787 |
h[0] = data->set.headers; |
| 1788 |
if(data->set.sep_headers) { |
| 1789 |
h[1] = data->set.proxyheaders; |
| 1790 |
numlists++; |
| 1791 |
} |
| 1792 |
break; |
| 1793 |
case HEADER_CONNECT: |
| 1794 |
if(data->set.sep_headers) |
| 1795 |
h[0] = data->set.proxyheaders; |
| 1796 |
else |
| 1797 |
h[0] = data->set.headers; |
| 1798 |
break; |
| 1799 |
} |
| 1800 |
|
| 1801 |
/* loop through one or two lists */ |
| 1802 |
for(i = 0; i < numlists; i++) { |
| 1803 |
headers = h[i]; |
| 1804 |
|
| 1805 |
while(headers) { |
| 1806 |
char *semicolonp = NULL; |
| 1807 |
ptr = strchr(headers->data, ':'); |
| 1808 |
if(!ptr) { |
| 1809 |
char *optr; |
| 1810 |
/* no colon, semicolon? */ |
| 1811 |
ptr = strchr(headers->data, ';'); |
| 1812 |
if(ptr) { |
| 1813 |
optr = ptr; |
| 1814 |
ptr++; /* pass the semicolon */ |
| 1815 |
while(*ptr && ISSPACE(*ptr)) |
| 1816 |
ptr++; |
| 1817 |
|
| 1818 |
if(*ptr) { |
| 1819 |
/* this may be used for something else in the future */ |
| 1820 |
optr = NULL; |
| 1821 |
} |
| 1822 |
else { |
| 1823 |
if(*(--ptr) == ';') { |
| 1824 |
/* copy the source */ |
| 1825 |
semicolonp = strdup(headers->data); |
| 1826 |
if(!semicolonp) { |
| 1827 |
Curl_add_buffer_free(&req_buffer); |
| 1828 |
return CURLE_OUT_OF_MEMORY; |
| 1829 |
} |
| 1830 |
/* put a colon where the semicolon is */ |
| 1831 |
semicolonp[ptr - headers->data] = ':'; |
| 1832 |
/* point at the colon */ |
| 1833 |
optr = &semicolonp [ptr - headers->data]; |
| 1834 |
} |
| 1835 |
} |
| 1836 |
ptr = optr; |
| 1837 |
} |
| 1838 |
} |
| 1839 |
if(ptr) { |
| 1840 |
/* we require a colon for this to be a true header */ |
| 1841 |
|
| 1842 |
ptr++; /* pass the colon */ |
| 1843 |
while(*ptr && ISSPACE(*ptr)) |
| 1844 |
ptr++; |
| 1845 |
|
| 1846 |
if(*ptr || semicolonp) { |
| 1847 |
/* only send this if the contents was non-blank or done special */ |
| 1848 |
CURLcode result = CURLE_OK; |
| 1849 |
char *compare = semicolonp ? semicolonp : headers->data; |
| 1850 |
|
| 1851 |
if(conn->allocptr.host && |
| 1852 |
/* a Host: header was sent already, don't pass on any custom Host: |
| 1853 |
header as that will produce *two* in the same request! */ |
| 1854 |
checkprefix("Host:", compare)) |
| 1855 |
; |
| 1856 |
else if(data->set.httpreq == HTTPREQ_POST_FORM && |
| 1857 |
/* this header (extended by formdata.c) is sent later */ |
| 1858 |
checkprefix("Content-Type:", compare)) |
| 1859 |
; |
| 1860 |
else if(data->set.httpreq == HTTPREQ_POST_MIME && |
| 1861 |
/* this header is sent later */ |
| 1862 |
checkprefix("Content-Type:", compare)) |
| 1863 |
; |
| 1864 |
else if(conn->bits.authneg && |
| 1865 |
/* while doing auth neg, don't allow the custom length since |
| 1866 |
we will force length zero then */ |
| 1867 |
checkprefix("Content-Length:", compare)) |
| 1868 |
; |
| 1869 |
else if(conn->allocptr.te && |
| 1870 |
/* when asking for Transfer-Encoding, don't pass on a custom |
| 1871 |
Connection: */ |
| 1872 |
checkprefix("Connection:", compare)) |
| 1873 |
; |
| 1874 |
else if((conn->httpversion >= 20) && |
| 1875 |
checkprefix("Transfer-Encoding:", compare)) |
| 1876 |
/* HTTP/2 doesn't support chunked requests */ |
| 1877 |
; |
| 1878 |
else if((checkprefix("Authorization:", compare) || |
| 1879 |
checkprefix("Cookie:", compare)) && |
| 1880 |
/* be careful of sending this potentially sensitive header to |
| 1881 |
other hosts */ |
| 1882 |
(data->state.this_is_a_follow && |
| 1883 |
data->state.first_host && |
| 1884 |
!data->set.allow_auth_to_other_hosts && |
| 1885 |
!strcasecompare(data->state.first_host, conn->host.name))) |
| 1886 |
; |
| 1887 |
else { |
| 1888 |
result = Curl_add_bufferf(&req_buffer, "%s\r\n", compare); |
| 1889 |
} |
| 1890 |
if(semicolonp) |
| 1891 |
free(semicolonp); |
| 1892 |
if(result) |
| 1893 |
return result; |
| 1894 |
} |
| 1895 |
} |
| 1896 |
headers = headers->next; |
| 1897 |
} |
| 1898 |
} |
| 1899 |
|
| 1900 |
return CURLE_OK; |
| 1901 |
} |
| 1902 |
|
| 1903 |
#ifndef CURL_DISABLE_PARSEDATE |
| 1904 |
CURLcode Curl_add_timecondition(const struct connectdata *conn, |
| 1905 |
Curl_send_buffer *req_buffer) |
| 1906 |
{ |
| 1907 |
struct Curl_easy *data = conn->data; |
| 1908 |
const struct tm *tm; |
| 1909 |
struct tm keeptime; |
| 1910 |
CURLcode result; |
| 1911 |
char datestr[80]; |
| 1912 |
const char *condp; |
| 1913 |
|
| 1914 |
if(data->set.timecondition == CURL_TIMECOND_NONE) |
| 1915 |
/* no condition was asked for */ |
| 1916 |
return CURLE_OK; |
| 1917 |
|
| 1918 |
result = Curl_gmtime(data->set.timevalue, &keeptime); |
| 1919 |
if(result) { |
| 1920 |
failf(data, "Invalid TIMEVALUE"); |
| 1921 |
return result; |
| 1922 |
} |
| 1923 |
tm = &keeptime; |
| 1924 |
|
| 1925 |
switch(data->set.timecondition) { |
| 1926 |
default: |
| 1927 |
return CURLE_BAD_FUNCTION_ARGUMENT; |
| 1928 |
|
| 1929 |
case CURL_TIMECOND_IFMODSINCE: |
| 1930 |
condp = "If-Modified-Since"; |
| 1931 |
break; |
| 1932 |
case CURL_TIMECOND_IFUNMODSINCE: |
| 1933 |
condp = "If-Unmodified-Since"; |
| 1934 |
break; |
| 1935 |
case CURL_TIMECOND_LASTMOD: |
| 1936 |
condp = "Last-Modified"; |
| 1937 |
break; |
| 1938 |
} |
| 1939 |
|
| 1940 |
if(Curl_checkheaders(conn, condp)) { |
| 1941 |
/* A custom header was specified; it will be sent instead. */ |
| 1942 |
return CURLE_OK; |
| 1943 |
} |
| 1944 |
|
| 1945 |
/* The If-Modified-Since header family should have their times set in |
| 1946 |
* GMT as RFC2616 defines: "All HTTP date/time stamps MUST be |
| 1947 |
* represented in Greenwich Mean Time (GMT), without exception. For the |
| 1948 |
* purposes of HTTP, GMT is exactly equal to UTC (Coordinated Universal |
| 1949 |
* Time)." (see page 20 of RFC2616). |
| 1950 |
*/ |
| 1951 |
|
| 1952 |
/* format: "Tue, 15 Nov 1994 12:45:26 GMT" */ |
| 1953 |
msnprintf(datestr, sizeof(datestr), |
| 1954 |
"%s: %s, %02d %s %4d %02d:%02d:%02d GMT\r\n", |
| 1955 |
condp, |
| 1956 |
Curl_wkday[tm->tm_wday?tm->tm_wday-1:6], |
| 1957 |
tm->tm_mday, |
| 1958 |
Curl_month[tm->tm_mon], |
| 1959 |
tm->tm_year + 1900, |
| 1960 |
tm->tm_hour, |
| 1961 |
tm->tm_min, |
| 1962 |
tm->tm_sec); |
| 1963 |
|
| 1964 |
result = Curl_add_buffer(&req_buffer, datestr, strlen(datestr)); |
| 1965 |
|
| 1966 |
return result; |
| 1967 |
} |
| 1968 |
#else |
| 1969 |
/* disabled */ |
| 1970 |
CURLcode Curl_add_timecondition(const struct connectdata *conn, |
| 1971 |
Curl_send_buffer *req_buffer) |
| 1972 |
{ |
| 1973 |
(void)conn; |
| 1974 |
(void)req_buffer; |
| 1975 |
return CURLE_OK; |
| 1976 |
} |
| 1977 |
#endif |
| 1978 |
|
| 1979 |
/* |
| 1980 |
* Curl_http() gets called from the generic multi_do() function when a HTTP |
| 1981 |
* request is to be performed. This creates and sends a properly constructed |
| 1982 |
* HTTP request. |
| 1983 |
*/ |
| 1984 |
CURLcode Curl_http(struct connectdata *conn, bool *done) |
| 1985 |
{ |
| 1986 |
struct Curl_easy *data = conn->data; |
| 1987 |
CURLcode result = CURLE_OK; |
| 1988 |
struct HTTP *http; |
| 1989 |
const char *path = data->state.up.path; |
| 1990 |
const char *query = data->state.up.query; |
| 1991 |
bool paste_ftp_userpwd = FALSE; |
| 1992 |
char ftp_typecode[sizeof("/;type=?")] = ""; |
| 1993 |
const char *host = conn->host.name; |
| 1994 |
const char *te = ""; /* transfer-encoding */ |
| 1995 |
const char *ptr; |
| 1996 |
const char *request; |
| 1997 |
Curl_HttpReq httpreq = data->set.httpreq; |
| 1998 |
#if !defined(CURL_DISABLE_COOKIES) |
| 1999 |
char *addcookies = NULL; |
| 2000 |
#endif |
| 2001 |
curl_off_t included_body = 0; |
| 2002 |
const char *httpstring; |
| 2003 |
Curl_send_buffer *req_buffer; |
| 2004 |
curl_off_t postsize = 0; /* curl_off_t to handle large file sizes */ |
| 2005 |
char *altused = NULL; |
| 2006 |
|
| 2007 |
/* Always consider the DO phase done after this function call, even if there |
| 2008 |
may be parts of the request that is not yet sent, since we can deal with |
| 2009 |
the rest of the request in the PERFORM phase. */ |
| 2010 |
*done = TRUE; |
| 2011 |
|
| 2012 |
if(conn->transport != TRNSPRT_QUIC) { |
| 2013 |
if(conn->httpversion < 20) { /* unless the connection is re-used and |
| 2014 |
already http2 */ |
| 2015 |
switch(conn->negnpn) { |
| 2016 |
case CURL_HTTP_VERSION_2: |
| 2017 |
conn->httpversion = 20; /* we know we're on HTTP/2 now */ |
| 2018 |
|
| 2019 |
result = Curl_http2_switched(conn, NULL, 0); |
| 2020 |
if(result) |
| 2021 |
return result; |
| 2022 |
break; |
| 2023 |
case CURL_HTTP_VERSION_1_1: |
| 2024 |
/* continue with HTTP/1.1 when explicitly requested */ |
| 2025 |
break; |
| 2026 |
default: |
| 2027 |
/* Check if user wants to use HTTP/2 with clear TCP*/ |
| 2028 |
#ifdef USE_NGHTTP2 |
| 2029 |
if(conn->data->set.httpversion == |
| 2030 |
CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE) { |
| 2031 |
if(conn->bits.httpproxy && !conn->bits.tunnel_proxy) { |
| 2032 |
/* We don't support HTTP/2 proxies yet. Also it's debatable |
| 2033 |
whether or not this setting should apply to HTTP/2 proxies. */ |
| 2034 |
infof(data, "Ignoring HTTP/2 prior knowledge due to proxy\n"); |
| 2035 |
break; |
| 2036 |
} |
| 2037 |
|
| 2038 |
DEBUGF(infof(data, "HTTP/2 over clean TCP\n")); |
| 2039 |
conn->httpversion = 20; |
| 2040 |
|
| 2041 |
result = Curl_http2_switched(conn, NULL, 0); |
| 2042 |
if(result) |
| 2043 |
return result; |
| 2044 |
} |
| 2045 |
#endif |
| 2046 |
break; |
| 2047 |
} |
| 2048 |
} |
| 2049 |
else { |
| 2050 |
/* prepare for a http2 request */ |
| 2051 |
result = Curl_http2_setup(conn); |
| 2052 |
if(result) |
| 2053 |
return result; |
| 2054 |
} |
| 2055 |
} |
| 2056 |
http = data->req.protop; |
| 2057 |
DEBUGASSERT(http); |
| 2058 |
|
| 2059 |
if(!data->state.this_is_a_follow) { |
| 2060 |
/* Free to avoid leaking memory on multiple requests*/ |
| 2061 |
free(data->state.first_host); |
| 2062 |
|
| 2063 |
data->state.first_host = strdup(conn->host.name); |
| 2064 |
if(!data->state.first_host) |
| 2065 |
return CURLE_OUT_OF_MEMORY; |
| 2066 |
|
| 2067 |
data->state.first_remote_port = conn->remote_port; |
| 2068 |
} |
| 2069 |
|
| 2070 |
if((conn->handler->protocol&(PROTO_FAMILY_HTTP|CURLPROTO_FTP)) && |
| 2071 |
data->set.upload) { |
| 2072 |
httpreq = HTTPREQ_PUT; |
| 2073 |
} |
| 2074 |
|
| 2075 |
/* Now set the 'request' pointer to the proper request string */ |
| 2076 |
if(data->set.str[STRING_CUSTOMREQUEST]) |
| 2077 |
request = data->set.str[STRING_CUSTOMREQUEST]; |
| 2078 |
else { |
| 2079 |
if(data->set.opt_no_body) |
| 2080 |
request = "HEAD"; |
| 2081 |
else { |
| 2082 |
DEBUGASSERT((httpreq > HTTPREQ_NONE) && (httpreq < HTTPREQ_LAST)); |
| 2083 |
switch(httpreq) { |
| 2084 |
case HTTPREQ_POST: |
| 2085 |
case HTTPREQ_POST_FORM: |
| 2086 |
case HTTPREQ_POST_MIME: |
| 2087 |
request = "POST"; |
| 2088 |
break; |
| 2089 |
case HTTPREQ_PUT: |
| 2090 |
request = "PUT"; |
| 2091 |
break; |
| 2092 |
case HTTPREQ_OPTIONS: |
| 2093 |
request = "OPTIONS"; |
| 2094 |
break; |
| 2095 |
default: /* this should never happen */ |
| 2096 |
case HTTPREQ_GET: |
| 2097 |
request = "GET"; |
| 2098 |
break; |
| 2099 |
case HTTPREQ_HEAD: |
| 2100 |
request = "HEAD"; |
| 2101 |
break; |
| 2102 |
} |
| 2103 |
} |
| 2104 |
} |
| 2105 |
|
| 2106 |
/* The User-Agent string might have been allocated in url.c already, because |
| 2107 |
it might have been used in the proxy connect, but if we have got a header |
| 2108 |
with the user-agent string specified, we erase the previously made string |
| 2109 |
here. */ |
| 2110 |
if(Curl_checkheaders(conn, "User-Agent")) { |
| 2111 |
free(conn->allocptr.uagent); |
| 2112 |
conn->allocptr.uagent = NULL; |
| 2113 |
} |
| 2114 |
|
| 2115 |
/* setup the authentication headers */ |
| 2116 |
{ |
| 2117 |
char *pq = NULL; |
| 2118 |
if(query && *query) { |
| 2119 |
pq = aprintf("%s?%s", path, query); |
| 2120 |
if(!pq) |
| 2121 |
return CURLE_OUT_OF_MEMORY; |
| 2122 |
} |
| 2123 |
result = Curl_http_output_auth(conn, request, (pq ? pq : path), FALSE); |
| 2124 |
free(pq); |
| 2125 |
if(result) |
| 2126 |
return result; |
| 2127 |
} |
| 2128 |
|
| 2129 |
if(((data->state.authhost.multipass && !data->state.authhost.done) |
| 2130 |
|| (data->state.authproxy.multipass && !data->state.authproxy.done)) && |
| 2131 |
(httpreq != HTTPREQ_GET) && |
| 2132 |
(httpreq != HTTPREQ_HEAD)) { |
| 2133 |
/* Auth is required and we are not authenticated yet. Make a PUT or POST |
| 2134 |
with content-length zero as a "probe". */ |
| 2135 |
conn->bits.authneg = TRUE; |
| 2136 |
} |
| 2137 |
else |
| 2138 |
conn->bits.authneg = FALSE; |
| 2139 |
|
| 2140 |
Curl_safefree(conn->allocptr.ref); |
| 2141 |
if(data->change.referer && !Curl_checkheaders(conn, "Referer")) { |
| 2142 |
conn->allocptr.ref = aprintf("Referer: %s\r\n", data->change.referer); |
| 2143 |
if(!conn->allocptr.ref) |
| 2144 |
return CURLE_OUT_OF_MEMORY; |
| 2145 |
} |
| 2146 |
else |
| 2147 |
conn->allocptr.ref = NULL; |
| 2148 |
|
| 2149 |
#if !defined(CURL_DISABLE_COOKIES) |
| 2150 |
if(data->set.str[STRING_COOKIE] && !Curl_checkheaders(conn, "Cookie")) |
| 2151 |
addcookies = data->set.str[STRING_COOKIE]; |
| 2152 |
#endif |
| 2153 |
|
| 2154 |
if(!Curl_checkheaders(conn, "Accept-Encoding") && |
| 2155 |
data->set.str[STRING_ENCODING]) { |
| 2156 |
Curl_safefree(conn->allocptr.accept_encoding); |
| 2157 |
conn->allocptr.accept_encoding = |
| 2158 |
aprintf("Accept-Encoding: %s\r\n", data->set.str[STRING_ENCODING]); |
| 2159 |
if(!conn->allocptr.accept_encoding) |
| 2160 |
return CURLE_OUT_OF_MEMORY; |
| 2161 |
} |
| 2162 |
else { |
| 2163 |
Curl_safefree(conn->allocptr.accept_encoding); |
| 2164 |
conn->allocptr.accept_encoding = NULL; |
| 2165 |
} |
| 2166 |
|
| 2167 |
#ifdef HAVE_LIBZ |
| 2168 |
/* we only consider transfer-encoding magic if libz support is built-in */ |
| 2169 |
|
| 2170 |
if(!Curl_checkheaders(conn, "TE") && |
| 2171 |
data->set.http_transfer_encoding) { |
| 2172 |
/* When we are to insert a TE: header in the request, we must also insert |
| 2173 |
TE in a Connection: header, so we need to merge the custom provided |
| 2174 |
Connection: header and prevent the original to get sent. Note that if |
| 2175 |
the user has inserted his/hers own TE: header we don't do this magic |
| 2176 |
but then assume that the user will handle it all! */ |
| 2177 |
char *cptr = Curl_checkheaders(conn, "Connection"); |
| 2178 |
#define TE_HEADER "TE: gzip\r\n" |
| 2179 |
|
| 2180 |
Curl_safefree(conn->allocptr.te); |
| 2181 |
|
| 2182 |
if(cptr) { |
| 2183 |
cptr = Curl_copy_header_value(cptr); |
| 2184 |
if(!cptr) |
| 2185 |
return CURLE_OUT_OF_MEMORY; |
| 2186 |
} |
| 2187 |
|
| 2188 |
/* Create the (updated) Connection: header */ |
| 2189 |
conn->allocptr.te = aprintf("Connection: %s%sTE\r\n" TE_HEADER, |
| 2190 |
cptr ? cptr : "", (cptr && *cptr) ? ", ":""); |
| 2191 |
|
| 2192 |
free(cptr); |
| 2193 |
if(!conn->allocptr.te) |
| 2194 |
return CURLE_OUT_OF_MEMORY; |
| 2195 |
} |
| 2196 |
#endif |
| 2197 |
|
| 2198 |
switch(httpreq) { |
| 2199 |
case HTTPREQ_POST_MIME: |
| 2200 |
http->sendit = &data->set.mimepost; |
| 2201 |
break; |
| 2202 |
case HTTPREQ_POST_FORM: |
| 2203 |
/* Convert the form structure into a mime structure. */ |
| 2204 |
Curl_mime_cleanpart(&http->form); |
| 2205 |
result = Curl_getformdata(data, &http->form, data->set.httppost, |
| 2206 |
data->state.fread_func); |
| 2207 |
if(result) |
| 2208 |
return result; |
| 2209 |
http->sendit = &http->form; |
| 2210 |
break; |
| 2211 |
default: |
| 2212 |
http->sendit = NULL; |
| 2213 |
} |
| 2214 |
|
| 2215 |
#ifndef CURL_DISABLE_MIME |
| 2216 |
if(http->sendit) { |
| 2217 |
const char *cthdr = Curl_checkheaders(conn, "Content-Type"); |
| 2218 |
|
| 2219 |
/* Read and seek body only. */ |
| 2220 |
http->sendit->flags |= MIME_BODY_ONLY; |
| 2221 |
|
| 2222 |
/* Prepare the mime structure headers & set content type. */ |
| 2223 |
|
| 2224 |
if(cthdr) |
| 2225 |
for(cthdr += 13; *cthdr == ' '; cthdr++) |
| 2226 |
; |
| 2227 |
else if(http->sendit->kind == MIMEKIND_MULTIPART) |
| 2228 |
cthdr = "multipart/form-data"; |
| 2229 |
|
| 2230 |
curl_mime_headers(http->sendit, data->set.headers, 0); |
| 2231 |
result = Curl_mime_prepare_headers(http->sendit, cthdr, |
| 2232 |
NULL, MIMESTRATEGY_FORM); |
| 2233 |
curl_mime_headers(http->sendit, NULL, 0); |
| 2234 |
if(!result) |
| 2235 |
result = Curl_mime_rewind(http->sendit); |
| 2236 |
if(result) |
| 2237 |
return result; |
| 2238 |
http->postsize = Curl_mime_size(http->sendit); |
| 2239 |
} |
| 2240 |
#endif |
| 2241 |
|
| 2242 |
ptr = Curl_checkheaders(conn, "Transfer-Encoding"); |
| 2243 |
if(ptr) { |
| 2244 |
/* Some kind of TE is requested, check if 'chunked' is chosen */ |
| 2245 |
data->req.upload_chunky = |
| 2246 |
Curl_compareheader(ptr, "Transfer-Encoding:", "chunked"); |
| 2247 |
} |
| 2248 |
else { |
| 2249 |
if((conn->handler->protocol & PROTO_FAMILY_HTTP) && |
| 2250 |
(((httpreq == HTTPREQ_POST_MIME || httpreq == HTTPREQ_POST_FORM) && |
| 2251 |
http->postsize < 0) || |
| 2252 |
((data->set.upload || httpreq == HTTPREQ_POST) && |
| 2253 |
data->state.infilesize == -1))) { |
| 2254 |
if(conn->bits.authneg) |
| 2255 |
/* don't enable chunked during auth neg */ |
| 2256 |
; |
| 2257 |
else if(use_http_1_1plus(data, conn)) { |
| 2258 |
if(conn->httpversion < 20) |
| 2259 |
/* HTTP, upload, unknown file size and not HTTP 1.0 */ |
| 2260 |
data->req.upload_chunky = TRUE; |
| 2261 |
} |
| 2262 |
else { |
| 2263 |
failf(data, "Chunky upload is not supported by HTTP 1.0"); |
| 2264 |
return CURLE_UPLOAD_FAILED; |
| 2265 |
} |
| 2266 |
} |
| 2267 |
else { |
| 2268 |
/* else, no chunky upload */ |
| 2269 |
data->req.upload_chunky = FALSE; |
| 2270 |
} |
| 2271 |
|
| 2272 |
if(data->req.upload_chunky) |
| 2273 |
te = "Transfer-Encoding: chunked\r\n"; |
| 2274 |
} |
| 2275 |
|
| 2276 |
Curl_safefree(conn->allocptr.host); |
| 2277 |
|
| 2278 |
ptr = Curl_checkheaders(conn, "Host"); |
| 2279 |
if(ptr && (!data->state.this_is_a_follow || |
| 2280 |
strcasecompare(data->state.first_host, conn->host.name))) { |
| 2281 |
#if !defined(CURL_DISABLE_COOKIES) |
| 2282 |
/* If we have a given custom Host: header, we extract the host name in |
| 2283 |
order to possibly use it for cookie reasons later on. We only allow the |
| 2284 |
custom Host: header if this is NOT a redirect, as setting Host: in the |
| 2285 |
redirected request is being out on thin ice. Except if the host name |
| 2286 |
is the same as the first one! */ |
| 2287 |
char *cookiehost = Curl_copy_header_value(ptr); |
| 2288 |
if(!cookiehost) |
| 2289 |
return CURLE_OUT_OF_MEMORY; |
| 2290 |
if(!*cookiehost) |
| 2291 |
/* ignore empty data */ |
| 2292 |
free(cookiehost); |
| 2293 |
else { |
| 2294 |
/* If the host begins with '[', we start searching for the port after |
| 2295 |
the bracket has been closed */ |
| 2296 |
if(*cookiehost == '[') { |
| 2297 |
char *closingbracket; |
| 2298 |
/* since the 'cookiehost' is an allocated memory area that will be |
| 2299 |
freed later we cannot simply increment the pointer */ |
| 2300 |
memmove(cookiehost, cookiehost + 1, strlen(cookiehost) - 1); |
| 2301 |
closingbracket = strchr(cookiehost, ']'); |
| 2302 |
if(closingbracket) |
| 2303 |
*closingbracket = 0; |
| 2304 |
} |
| 2305 |
else { |
| 2306 |
int startsearch = 0; |
| 2307 |
char *colon = strchr(cookiehost + startsearch, ':'); |
| 2308 |
if(colon) |
| 2309 |
*colon = 0; /* The host must not include an embedded port number */ |
| 2310 |
} |
| 2311 |
Curl_safefree(conn->allocptr.cookiehost); |
| 2312 |
conn->allocptr.cookiehost = cookiehost; |
| 2313 |
} |
| 2314 |
#endif |
| 2315 |
|
| 2316 |
if(strcmp("Host:", ptr)) { |
| 2317 |
conn->allocptr.host = aprintf("Host:%s\r\n", &ptr[5]); |
| 2318 |
if(!conn->allocptr.host) |
| 2319 |
return CURLE_OUT_OF_MEMORY; |
| 2320 |
} |
| 2321 |
else |
| 2322 |
/* when clearing the header */ |
| 2323 |
conn->allocptr.host = NULL; |
| 2324 |
} |
| 2325 |
else { |
| 2326 |
/* When building Host: headers, we must put the host name within |
| 2327 |
[brackets] if the host name is a plain IPv6-address. RFC2732-style. */ |
| 2328 |
|
| 2329 |
if(((conn->given->protocol&CURLPROTO_HTTPS) && |
| 2330 |
(conn->remote_port == PORT_HTTPS)) || |
| 2331 |
((conn->given->protocol&CURLPROTO_HTTP) && |
| 2332 |
(conn->remote_port == PORT_HTTP)) ) |
| 2333 |
/* if(HTTPS on port 443) OR (HTTP on port 80) then don't include |
| 2334 |
the port number in the host string */ |
| 2335 |
conn->allocptr.host = aprintf("Host: %s%s%s\r\n", |
| 2336 |
conn->bits.ipv6_ip?"[":"", |
| 2337 |
host, |
| 2338 |
conn->bits.ipv6_ip?"]":""); |
| 2339 |
else |
| 2340 |
conn->allocptr.host = aprintf("Host: %s%s%s:%d\r\n", |
| 2341 |
conn->bits.ipv6_ip?"[":"", |
| 2342 |
host, |
| 2343 |
conn->bits.ipv6_ip?"]":"", |
| 2344 |
conn->remote_port); |
| 2345 |
|
| 2346 |
if(!conn->allocptr.host) |
| 2347 |
/* without Host: we can't make a nice request */ |
| 2348 |
return CURLE_OUT_OF_MEMORY; |
| 2349 |
} |
| 2350 |
|
| 2351 |
#ifndef CURL_DISABLE_PROXY |
| 2352 |
if(conn->bits.httpproxy && !conn->bits.tunnel_proxy) { |
| 2353 |
/* Using a proxy but does not tunnel through it */ |
| 2354 |
|
| 2355 |
/* The path sent to the proxy is in fact the entire URL. But if the remote |
| 2356 |
host is a IDN-name, we must make sure that the request we produce only |
| 2357 |
uses the encoded host name! */ |
| 2358 |
|
| 2359 |
/* and no fragment part */ |
| 2360 |
CURLUcode uc; |
| 2361 |
CURLU *h = curl_url_dup(data->state.uh); |
| 2362 |
if(!h) |
| 2363 |
return CURLE_OUT_OF_MEMORY; |
| 2364 |
|
| 2365 |
if(conn->host.dispname != conn->host.name) { |
| 2366 |
uc = curl_url_set(h, CURLUPART_HOST, conn->host.name, 0); |
| 2367 |
if(uc) { |
| 2368 |
curl_url_cleanup(h); |
| 2369 |
return CURLE_OUT_OF_MEMORY; |
| 2370 |
} |
| 2371 |
} |
| 2372 |
uc = curl_url_set(h, CURLUPART_FRAGMENT, NULL, 0); |
| 2373 |
if(uc) { |
| 2374 |
curl_url_cleanup(h); |
| 2375 |
return CURLE_OUT_OF_MEMORY; |
| 2376 |
} |
| 2377 |
|
| 2378 |
if(strcasecompare("http", data->state.up.scheme)) { |
| 2379 |
/* when getting HTTP, we don't want the userinfo the URL */ |
| 2380 |
uc = curl_url_set(h, CURLUPART_USER, NULL, 0); |
| 2381 |
if(uc) { |
| 2382 |
curl_url_cleanup(h); |
| 2383 |
return CURLE_OUT_OF_MEMORY; |
| 2384 |
} |
| 2385 |
uc = curl_url_set(h, CURLUPART_PASSWORD, NULL, 0); |
| 2386 |
if(uc) { |
| 2387 |
curl_url_cleanup(h); |
| 2388 |
return CURLE_OUT_OF_MEMORY; |
| 2389 |
} |
| 2390 |
} |
| 2391 |
/* Extract the URL to use in the request. Store in STRING_TEMP_URL for |
| 2392 |
clean-up reasons if the function returns before the free() further |
| 2393 |
down. */ |
| 2394 |
uc = curl_url_get(h, CURLUPART_URL, &data->set.str[STRING_TEMP_URL], 0); |
| 2395 |
if(uc) { |
| 2396 |
curl_url_cleanup(h); |
| 2397 |
return CURLE_OUT_OF_MEMORY; |
| 2398 |
} |
| 2399 |
|
| 2400 |
curl_url_cleanup(h); |
| 2401 |
|
| 2402 |
if(strcasecompare("ftp", data->state.up.scheme)) { |
| 2403 |
if(data->set.proxy_transfer_mode) { |
| 2404 |
/* when doing ftp, append ;type=<a|i> if not present */ |
| 2405 |
char *type = strstr(path, ";type="); |
| 2406 |
if(type && type[6] && type[7] == 0) { |
| 2407 |
switch(Curl_raw_toupper(type[6])) { |
| 2408 |
case 'A': |
| 2409 |
case 'D': |
| 2410 |
case 'I': |
| 2411 |
break; |
| 2412 |
default: |
| 2413 |
type = NULL; |
| 2414 |
} |
| 2415 |
} |
| 2416 |
if(!type) { |
| 2417 |
char *p = ftp_typecode; |
| 2418 |
/* avoid sending invalid URLs like ftp://example.com;type=i if the |
| 2419 |
* user specified ftp://example.com without the slash */ |
| 2420 |
if(!*data->state.up.path && path[strlen(path) - 1] != '/') { |
| 2421 |
*p++ = '/'; |
| 2422 |
} |
| 2423 |
msnprintf(p, sizeof(ftp_typecode) - 1, ";type=%c", |
| 2424 |
data->set.prefer_ascii ? 'a' : 'i'); |
| 2425 |
} |
| 2426 |
} |
| 2427 |
if(conn->bits.user_passwd && !conn->bits.userpwd_in_url) |
| 2428 |
paste_ftp_userpwd = TRUE; |
| 2429 |
} |
| 2430 |
} |
| 2431 |
#endif /* CURL_DISABLE_PROXY */ |
| 2432 |
|
| 2433 |
http->p_accept = Curl_checkheaders(conn, "Accept")?NULL:"Accept: */*\r\n"; |
| 2434 |
|
| 2435 |
if((HTTPREQ_POST == httpreq || HTTPREQ_PUT == httpreq) && |
| 2436 |
data->state.resume_from) { |
| 2437 |
/********************************************************************** |
| 2438 |
* Resuming upload in HTTP means that we PUT or POST and that we have |
| 2439 |
* got a resume_from value set. The resume value has already created |
| 2440 |
* a Range: header that will be passed along. We need to "fast forward" |
| 2441 |
* the file the given number of bytes and decrease the assume upload |
| 2442 |
* file size before we continue this venture in the dark lands of HTTP. |
| 2443 |
* Resuming mime/form posting at an offset > 0 has no sense and is ignored. |
| 2444 |
*********************************************************************/ |
| 2445 |
|
| 2446 |
if(data->state.resume_from < 0) { |
| 2447 |
/* |
| 2448 |
* This is meant to get the size of the present remote-file by itself. |
| 2449 |
* We don't support this now. Bail out! |
| 2450 |
*/ |
| 2451 |
data->state.resume_from = 0; |
| 2452 |
} |
| 2453 |
|
| 2454 |
if(data->state.resume_from && !data->state.this_is_a_follow) { |
| 2455 |
/* do we still game? */ |
| 2456 |
|
| 2457 |
/* Now, let's read off the proper amount of bytes from the |
| 2458 |
input. */ |
| 2459 |
int seekerr = CURL_SEEKFUNC_CANTSEEK; |
| 2460 |
if(conn->seek_func) { |
| 2461 |
Curl_set_in_callback(data, true); |
| 2462 |
seekerr = conn->seek_func(conn->seek_client, data->state.resume_from, |
| 2463 |
SEEK_SET); |
| 2464 |
Curl_set_in_callback(data, false); |
| 2465 |
} |
| 2466 |
|
| 2467 |
if(seekerr != CURL_SEEKFUNC_OK) { |
| 2468 |
curl_off_t passed = 0; |
| 2469 |
|
| 2470 |
if(seekerr != CURL_SEEKFUNC_CANTSEEK) { |
| 2471 |
failf(data, "Could not seek stream"); |
| 2472 |
return CURLE_READ_ERROR; |
| 2473 |
} |
| 2474 |
/* when seekerr == CURL_SEEKFUNC_CANTSEEK (can't seek to offset) */ |
| 2475 |
do { |
| 2476 |
size_t readthisamountnow = |
| 2477 |
(data->state.resume_from - passed > data->set.buffer_size) ? |
| 2478 |
(size_t)data->set.buffer_size : |
| 2479 |
curlx_sotouz(data->state.resume_from - passed); |
| 2480 |
|
| 2481 |
size_t actuallyread = |
| 2482 |
data->state.fread_func(data->state.buffer, 1, readthisamountnow, |
| 2483 |
data->state.in); |
| 2484 |
|
| 2485 |
passed += actuallyread; |
| 2486 |
if((actuallyread == 0) || (actuallyread > readthisamountnow)) { |
| 2487 |
/* this checks for greater-than only to make sure that the |
| 2488 |
CURL_READFUNC_ABORT return code still aborts */ |
| 2489 |
failf(data, "Could only read %" CURL_FORMAT_CURL_OFF_T |
| 2490 |
" bytes from the input", passed); |
| 2491 |
return CURLE_READ_ERROR; |
| 2492 |
} |
| 2493 |
} while(passed < data->state.resume_from); |
| 2494 |
} |
| 2495 |
|
| 2496 |
/* now, decrease the size of the read */ |
| 2497 |
if(data->state.infilesize>0) { |
| 2498 |
data->state.infilesize -= data->state.resume_from; |
| 2499 |
|
| 2500 |
if(data->state.infilesize <= 0) { |
| 2501 |
failf(data, "File already completely uploaded"); |
| 2502 |
return CURLE_PARTIAL_FILE; |
| 2503 |
} |
| 2504 |
} |
| 2505 |
/* we've passed, proceed as normal */ |
| 2506 |
} |
| 2507 |
} |
| 2508 |
if(data->state.use_range) { |
| 2509 |
/* |
| 2510 |
* A range is selected. We use different headers whether we're downloading |
| 2511 |
* or uploading and we always let customized headers override our internal |
| 2512 |
* ones if any such are specified. |
| 2513 |
*/ |
| 2514 |
if(((httpreq == HTTPREQ_GET) || (httpreq == HTTPREQ_HEAD)) && |
| 2515 |
!Curl_checkheaders(conn, "Range")) { |
| 2516 |
/* if a line like this was already allocated, free the previous one */ |
| 2517 |
free(conn->allocptr.rangeline); |
| 2518 |
conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", |
| 2519 |
data->state.range); |
| 2520 |
} |
| 2521 |
else if((httpreq == HTTPREQ_POST || httpreq == HTTPREQ_PUT) && |
| 2522 |
!Curl_checkheaders(conn, "Content-Range")) { |
| 2523 |
|
| 2524 |
/* if a line like this was already allocated, free the previous one */ |
| 2525 |
free(conn->allocptr.rangeline); |
| 2526 |
|
| 2527 |
if(data->set.set_resume_from < 0) { |
| 2528 |
/* Upload resume was asked for, but we don't know the size of the |
| 2529 |
remote part so we tell the server (and act accordingly) that we |
| 2530 |
upload the whole file (again) */ |
| 2531 |
conn->allocptr.rangeline = |
| 2532 |
aprintf("Content-Range: bytes 0-%" CURL_FORMAT_CURL_OFF_T |
| 2533 |
"/%" CURL_FORMAT_CURL_OFF_T "\r\n", |
| 2534 |
data->state.infilesize - 1, data->state.infilesize); |
| 2535 |
|
| 2536 |
} |
| 2537 |
else if(data->state.resume_from) { |
| 2538 |
/* This is because "resume" was selected */ |
| 2539 |
curl_off_t total_expected_size = |
| 2540 |
data->state.resume_from + data->state.infilesize; |
| 2541 |
conn->allocptr.rangeline = |
| 2542 |
aprintf("Content-Range: bytes %s%" CURL_FORMAT_CURL_OFF_T |
| 2543 |
"/%" CURL_FORMAT_CURL_OFF_T "\r\n", |
| 2544 |
data->state.range, total_expected_size-1, |
| 2545 |
total_expected_size); |
| 2546 |
} |
| 2547 |
else { |
| 2548 |
/* Range was selected and then we just pass the incoming range and |
| 2549 |
append total size */ |
| 2550 |
conn->allocptr.rangeline = |
| 2551 |
aprintf("Content-Range: bytes %s/%" CURL_FORMAT_CURL_OFF_T "\r\n", |
| 2552 |
data->state.range, data->state.infilesize); |
| 2553 |
} |
| 2554 |
if(!conn->allocptr.rangeline) |
| 2555 |
return CURLE_OUT_OF_MEMORY; |
| 2556 |
} |
| 2557 |
} |
| 2558 |
|
| 2559 |
httpstring = get_http_string(data, conn); |
| 2560 |
|
| 2561 |
/* initialize a dynamic send-buffer */ |
| 2562 |
req_buffer = Curl_add_buffer_init(); |
| 2563 |
|
| 2564 |
if(!req_buffer) |
| 2565 |
return CURLE_OUT_OF_MEMORY; |
| 2566 |
|
| 2567 |
/* add the main request stuff */ |
| 2568 |
/* GET/HEAD/POST/PUT */ |
| 2569 |
result = Curl_add_bufferf(&req_buffer, "%s ", request); |
| 2570 |
if(result) |
| 2571 |
return result; |
| 2572 |
|
| 2573 |
if(data->set.str[STRING_TARGET]) { |
| 2574 |
path = data->set.str[STRING_TARGET]; |
| 2575 |
query = NULL; |
| 2576 |
} |
| 2577 |
|
| 2578 |
#ifndef CURL_DISABLE_PROXY |
| 2579 |
/* url */ |
| 2580 |
if(conn->bits.httpproxy && !conn->bits.tunnel_proxy) { |
| 2581 |
char *url = data->set.str[STRING_TEMP_URL]; |
| 2582 |
result = Curl_add_buffer(&req_buffer, url, strlen(url)); |
| 2583 |
Curl_safefree(data->set.str[STRING_TEMP_URL]); |
| 2584 |
} |
| 2585 |
else |
| 2586 |
#endif |
| 2587 |
if(paste_ftp_userpwd) |
| 2588 |
result = Curl_add_bufferf(&req_buffer, "ftp://%s:%s@%s", |
| 2589 |
conn->user, conn->passwd, |
| 2590 |
path + sizeof("ftp://") - 1); |
| 2591 |
else { |
| 2592 |
result = Curl_add_buffer(&req_buffer, path, strlen(path)); |
| 2593 |
if(result) |
| 2594 |
return result; |
| 2595 |
if(query) |
| 2596 |
result = Curl_add_bufferf(&req_buffer, "?%s", query); |
| 2597 |
} |
| 2598 |
if(result) |
| 2599 |
return result; |
| 2600 |
|
| 2601 |
#ifdef USE_ALTSVC |
| 2602 |
if(conn->bits.altused && !Curl_checkheaders(conn, "Alt-Used")) { |
| 2603 |
altused = aprintf("Alt-Used: %s:%d\r\n", |
| 2604 |
conn->conn_to_host.name, conn->conn_to_port); |
| 2605 |
if(!altused) |
| 2606 |
return CURLE_OUT_OF_MEMORY; |
| 2607 |
} |
| 2608 |
#endif |
| 2609 |
result = |
| 2610 |
Curl_add_bufferf(&req_buffer, |
| 2611 |
"%s" /* ftp typecode (;type=x) */ |
| 2612 |
" HTTP/%s\r\n" /* HTTP version */ |
| 2613 |
"%s" /* host */ |
| 2614 |
"%s" /* proxyuserpwd */ |
| 2615 |
"%s" /* userpwd */ |
| 2616 |
"%s" /* range */ |
| 2617 |
"%s" /* user agent */ |
| 2618 |
"%s" /* accept */ |
| 2619 |
"%s" /* TE: */ |
| 2620 |
"%s" /* accept-encoding */ |
| 2621 |
"%s" /* referer */ |
| 2622 |
"%s" /* Proxy-Connection */ |
| 2623 |
"%s" /* transfer-encoding */ |
| 2624 |
"%s",/* Alt-Used */ |
| 2625 |
|
| 2626 |
ftp_typecode, |
| 2627 |
httpstring, |
| 2628 |
(conn->allocptr.host?conn->allocptr.host:""), |
| 2629 |
conn->allocptr.proxyuserpwd? |
| 2630 |
conn->allocptr.proxyuserpwd:"", |
| 2631 |
conn->allocptr.userpwd?conn->allocptr.userpwd:"", |
| 2632 |
(data->state.use_range && conn->allocptr.rangeline)? |
| 2633 |
conn->allocptr.rangeline:"", |
| 2634 |
(data->set.str[STRING_USERAGENT] && |
| 2635 |
*data->set.str[STRING_USERAGENT] && |
| 2636 |
conn->allocptr.uagent)? |
| 2637 |
conn->allocptr.uagent:"", |
| 2638 |
http->p_accept?http->p_accept:"", |
| 2639 |
conn->allocptr.te?conn->allocptr.te:"", |
| 2640 |
(data->set.str[STRING_ENCODING] && |
| 2641 |
*data->set.str[STRING_ENCODING] && |
| 2642 |
conn->allocptr.accept_encoding)? |
| 2643 |
conn->allocptr.accept_encoding:"", |
| 2644 |
(data->change.referer && conn->allocptr.ref)? |
| 2645 |
conn->allocptr.ref:"" /* Referer: <data> */, |
| 2646 |
(conn->bits.httpproxy && |
| 2647 |
!conn->bits.tunnel_proxy && |
| 2648 |
!Curl_checkProxyheaders(conn, "Proxy-Connection"))? |
| 2649 |
"Proxy-Connection: Keep-Alive\r\n":"", |
| 2650 |
te, |
| 2651 |
altused ? altused : "" |
| 2652 |
); |
| 2653 |
|
| 2654 |
/* clear userpwd and proxyuserpwd to avoid re-using old credentials |
| 2655 |
* from re-used connections */ |
| 2656 |
Curl_safefree(conn->allocptr.userpwd); |
| 2657 |
Curl_safefree(conn->allocptr.proxyuserpwd); |
| 2658 |
free(altused); |
| 2659 |
|
| 2660 |
if(result) |
| 2661 |
return result; |
| 2662 |
|
| 2663 |
if(!(conn->handler->flags&PROTOPT_SSL) && |
| 2664 |
conn->httpversion != 20 && |
| 2665 |
(data->set.httpversion == CURL_HTTP_VERSION_2)) { |
| 2666 |
/* append HTTP2 upgrade magic stuff to the HTTP request if it isn't done |
| 2667 |
over SSL */ |
| 2668 |
result = Curl_http2_request_upgrade(req_buffer, conn); |
| 2669 |
if(result) |
| 2670 |
return result; |
| 2671 |
} |
| 2672 |
|
| 2673 |
#if !defined(CURL_DISABLE_COOKIES) |
| 2674 |
if(data->cookies || addcookies) { |
| 2675 |
struct Cookie *co = NULL; /* no cookies from start */ |
| 2676 |
int count = 0; |
| 2677 |
|
| 2678 |
if(data->cookies && data->state.cookie_engine) { |
| 2679 |
Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE); |
| 2680 |
co = Curl_cookie_getlist(data->cookies, |
| 2681 |
conn->allocptr.cookiehost? |
| 2682 |
conn->allocptr.cookiehost:host, |
| 2683 |
data->state.up.path, |
| 2684 |
(conn->handler->protocol&CURLPROTO_HTTPS)? |
| 2685 |
TRUE:FALSE); |
| 2686 |
Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); |
| 2687 |
} |
| 2688 |
if(co) { |
| 2689 |
struct Cookie *store = co; |
| 2690 |
/* now loop through all cookies that matched */ |
| 2691 |
while(co) { |
| 2692 |
if(co->value) { |
| 2693 |
if(0 == count) { |
| 2694 |
result = Curl_add_bufferf(&req_buffer, "Cookie: "); |
| 2695 |
if(result) |
| 2696 |
break; |
| 2697 |
} |
| 2698 |
result = Curl_add_bufferf(&req_buffer, |
| 2699 |
"%s%s=%s", count?"; ":"", |
| 2700 |
co->name, co->value); |
| 2701 |
if(result) |
| 2702 |
break; |
| 2703 |
count++; |
| 2704 |
} |
| 2705 |
co = co->next; /* next cookie please */ |
| 2706 |
} |
| 2707 |
Curl_cookie_freelist(store); |
| 2708 |
} |
| 2709 |
if(addcookies && !result) { |
| 2710 |
if(!count) |
| 2711 |
result = Curl_add_bufferf(&req_buffer, "Cookie: "); |
| 2712 |
if(!result) { |
| 2713 |
result = Curl_add_bufferf(&req_buffer, "%s%s", count?"; ":"", |
| 2714 |
addcookies); |
| 2715 |
count++; |
| 2716 |
} |
| 2717 |
} |
| 2718 |
if(count && !result) |
| 2719 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); |
| 2720 |
|
| 2721 |
if(result) |
| 2722 |
return result; |
| 2723 |
} |
| 2724 |
#endif |
| 2725 |
|
| 2726 |
result = Curl_add_timecondition(conn, req_buffer); |
| 2727 |
if(result) |
| 2728 |
return result; |
| 2729 |
|
| 2730 |
result = Curl_add_custom_headers(conn, FALSE, req_buffer); |
| 2731 |
if(result) |
| 2732 |
return result; |
| 2733 |
|
| 2734 |
http->postdata = NULL; /* nothing to post at this point */ |
| 2735 |
Curl_pgrsSetUploadSize(data, -1); /* upload size is unknown atm */ |
| 2736 |
|
| 2737 |
/* If 'authdone' is FALSE, we must not set the write socket index to the |
| 2738 |
Curl_transfer() call below, as we're not ready to actually upload any |
| 2739 |
data yet. */ |
| 2740 |
|
| 2741 |
switch(httpreq) { |
| 2742 |
|
| 2743 |
case HTTPREQ_PUT: /* Let's PUT the data to the server! */ |
| 2744 |
|
| 2745 |
if(conn->bits.authneg) |
| 2746 |
postsize = 0; |
| 2747 |
else |
| 2748 |
postsize = data->state.infilesize; |
| 2749 |
|
| 2750 |
if((postsize != -1) && !data->req.upload_chunky && |
| 2751 |
(conn->bits.authneg || !Curl_checkheaders(conn, "Content-Length"))) { |
| 2752 |
/* only add Content-Length if not uploading chunked */ |
| 2753 |
result = Curl_add_bufferf(&req_buffer, |
| 2754 |
"Content-Length: %" CURL_FORMAT_CURL_OFF_T |
| 2755 |
"\r\n", postsize); |
| 2756 |
if(result) |
| 2757 |
return result; |
| 2758 |
} |
| 2759 |
|
| 2760 |
if(postsize != 0) { |
| 2761 |
result = expect100(data, conn, req_buffer); |
| 2762 |
if(result) |
| 2763 |
return result; |
| 2764 |
} |
| 2765 |
|
| 2766 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); /* end of headers */ |
| 2767 |
if(result) |
| 2768 |
return result; |
| 2769 |
|
| 2770 |
/* set the upload size to the progress meter */ |
| 2771 |
Curl_pgrsSetUploadSize(data, postsize); |
| 2772 |
|
| 2773 |
/* this sends the buffer and frees all the buffer resources */ |
| 2774 |
result = Curl_add_buffer_send(&req_buffer, conn, |
| 2775 |
&data->info.request_size, 0, FIRSTSOCKET); |
| 2776 |
if(result) |
| 2777 |
failf(data, "Failed sending PUT request"); |
| 2778 |
else |
| 2779 |
/* prepare for transfer */ |
| 2780 |
Curl_setup_transfer(data, FIRSTSOCKET, -1, TRUE, |
| 2781 |
postsize?FIRSTSOCKET:-1); |
| 2782 |
if(result) |
| 2783 |
return result; |
| 2784 |
break; |
| 2785 |
|
| 2786 |
case HTTPREQ_POST_FORM: |
| 2787 |
case HTTPREQ_POST_MIME: |
| 2788 |
/* This is form posting using mime data. */ |
| 2789 |
if(conn->bits.authneg) { |
| 2790 |
/* nothing to post! */ |
| 2791 |
result = Curl_add_bufferf(&req_buffer, "Content-Length: 0\r\n\r\n"); |
| 2792 |
if(result) |
| 2793 |
return result; |
| 2794 |
|
| 2795 |
result = Curl_add_buffer_send(&req_buffer, conn, |
| 2796 |
&data->info.request_size, 0, FIRSTSOCKET); |
| 2797 |
if(result) |
| 2798 |
failf(data, "Failed sending POST request"); |
| 2799 |
else |
| 2800 |
/* setup variables for the upcoming transfer */ |
| 2801 |
Curl_setup_transfer(data, FIRSTSOCKET, -1, TRUE, -1); |
| 2802 |
break; |
| 2803 |
} |
| 2804 |
|
| 2805 |
data->state.infilesize = postsize = http->postsize; |
| 2806 |
|
| 2807 |
/* We only set Content-Length and allow a custom Content-Length if |
| 2808 |
we don't upload data chunked, as RFC2616 forbids us to set both |
| 2809 |
kinds of headers (Transfer-Encoding: chunked and Content-Length) */ |
| 2810 |
if(postsize != -1 && !data->req.upload_chunky && |
| 2811 |
(conn->bits.authneg || !Curl_checkheaders(conn, "Content-Length"))) { |
| 2812 |
/* we allow replacing this header if not during auth negotiation, |
| 2813 |
although it isn't very wise to actually set your own */ |
| 2814 |
result = Curl_add_bufferf(&req_buffer, |
| 2815 |
"Content-Length: %" CURL_FORMAT_CURL_OFF_T |
| 2816 |
"\r\n", postsize); |
| 2817 |
if(result) |
| 2818 |
return result; |
| 2819 |
} |
| 2820 |
|
| 2821 |
#ifndef CURL_DISABLE_MIME |
| 2822 |
/* Output mime-generated headers. */ |
| 2823 |
{ |
| 2824 |
struct curl_slist *hdr; |
| 2825 |
|
| 2826 |
for(hdr = http->sendit->curlheaders; hdr; hdr = hdr->next) { |
| 2827 |
result = Curl_add_bufferf(&req_buffer, "%s\r\n", hdr->data); |
| 2828 |
if(result) |
| 2829 |
return result; |
| 2830 |
} |
| 2831 |
} |
| 2832 |
#endif |
| 2833 |
|
| 2834 |
/* For really small posts we don't use Expect: headers at all, and for |
| 2835 |
the somewhat bigger ones we allow the app to disable it. Just make |
| 2836 |
sure that the expect100header is always set to the preferred value |
| 2837 |
here. */ |
| 2838 |
ptr = Curl_checkheaders(conn, "Expect"); |
| 2839 |
if(ptr) { |
| 2840 |
data->state.expect100header = |
| 2841 |
Curl_compareheader(ptr, "Expect:", "100-continue"); |
| 2842 |
} |
| 2843 |
else if(postsize > EXPECT_100_THRESHOLD || postsize < 0) { |
| 2844 |
result = expect100(data, conn, req_buffer); |
| 2845 |
if(result) |
| 2846 |
return result; |
| 2847 |
} |
| 2848 |
else |
| 2849 |
data->state.expect100header = FALSE; |
| 2850 |
|
| 2851 |
/* make the request end in a true CRLF */ |
| 2852 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); |
| 2853 |
if(result) |
| 2854 |
return result; |
| 2855 |
|
| 2856 |
/* set the upload size to the progress meter */ |
| 2857 |
Curl_pgrsSetUploadSize(data, postsize); |
| 2858 |
|
| 2859 |
/* Read from mime structure. */ |
| 2860 |
data->state.fread_func = (curl_read_callback) Curl_mime_read; |
| 2861 |
data->state.in = (void *) http->sendit; |
| 2862 |
http->sending = HTTPSEND_BODY; |
| 2863 |
|
| 2864 |
/* this sends the buffer and frees all the buffer resources */ |
| 2865 |
result = Curl_add_buffer_send(&req_buffer, conn, |
| 2866 |
&data->info.request_size, 0, FIRSTSOCKET); |
| 2867 |
if(result) |
| 2868 |
failf(data, "Failed sending POST request"); |
| 2869 |
else |
| 2870 |
/* prepare for transfer */ |
| 2871 |
Curl_setup_transfer(data, FIRSTSOCKET, -1, TRUE, |
| 2872 |
postsize?FIRSTSOCKET:-1); |
| 2873 |
if(result) |
| 2874 |
return result; |
| 2875 |
|
| 2876 |
break; |
| 2877 |
|
| 2878 |
case HTTPREQ_POST: |
| 2879 |
/* this is the simple POST, using x-www-form-urlencoded style */ |
| 2880 |
|
| 2881 |
if(conn->bits.authneg) |
| 2882 |
postsize = 0; |
| 2883 |
else |
| 2884 |
/* the size of the post body */ |
| 2885 |
postsize = data->state.infilesize; |
| 2886 |
|
| 2887 |
/* We only set Content-Length and allow a custom Content-Length if |
| 2888 |
we don't upload data chunked, as RFC2616 forbids us to set both |
| 2889 |
kinds of headers (Transfer-Encoding: chunked and Content-Length) */ |
| 2890 |
if((postsize != -1) && !data->req.upload_chunky && |
| 2891 |
(conn->bits.authneg || !Curl_checkheaders(conn, "Content-Length"))) { |
| 2892 |
/* we allow replacing this header if not during auth negotiation, |
| 2893 |
although it isn't very wise to actually set your own */ |
| 2894 |
result = Curl_add_bufferf(&req_buffer, |
| 2895 |
"Content-Length: %" CURL_FORMAT_CURL_OFF_T |
| 2896 |
"\r\n", postsize); |
| 2897 |
if(result) |
| 2898 |
return result; |
| 2899 |
} |
| 2900 |
|
| 2901 |
if(!Curl_checkheaders(conn, "Content-Type")) { |
| 2902 |
result = Curl_add_bufferf(&req_buffer, |
| 2903 |
"Content-Type: application/" |
| 2904 |
"x-www-form-urlencoded\r\n"); |
| 2905 |
if(result) |
| 2906 |
return result; |
| 2907 |
} |
| 2908 |
|
| 2909 |
/* For really small posts we don't use Expect: headers at all, and for |
| 2910 |
the somewhat bigger ones we allow the app to disable it. Just make |
| 2911 |
sure that the expect100header is always set to the preferred value |
| 2912 |
here. */ |
| 2913 |
ptr = Curl_checkheaders(conn, "Expect"); |
| 2914 |
if(ptr) { |
| 2915 |
data->state.expect100header = |
| 2916 |
Curl_compareheader(ptr, "Expect:", "100-continue"); |
| 2917 |
} |
| 2918 |
else if(postsize > EXPECT_100_THRESHOLD || postsize < 0) { |
| 2919 |
result = expect100(data, conn, req_buffer); |
| 2920 |
if(result) |
| 2921 |
return result; |
| 2922 |
} |
| 2923 |
else |
| 2924 |
data->state.expect100header = FALSE; |
| 2925 |
|
| 2926 |
if(data->set.postfields) { |
| 2927 |
|
| 2928 |
/* In HTTP2, we send request body in DATA frame regardless of |
| 2929 |
its size. */ |
| 2930 |
if(conn->httpversion != 20 && |
| 2931 |
!data->state.expect100header && |
| 2932 |
(postsize < MAX_INITIAL_POST_SIZE)) { |
| 2933 |
/* if we don't use expect: 100 AND |
| 2934 |
postsize is less than MAX_INITIAL_POST_SIZE |
| 2935 |
|
| 2936 |
then append the post data to the HTTP request header. This limit |
| 2937 |
is no magic limit but only set to prevent really huge POSTs to |
| 2938 |
get the data duplicated with malloc() and family. */ |
| 2939 |
|
| 2940 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); /* end of headers! */ |
| 2941 |
if(result) |
| 2942 |
return result; |
| 2943 |
|
| 2944 |
if(!data->req.upload_chunky) { |
| 2945 |
/* We're not sending it 'chunked', append it to the request |
| 2946 |
already now to reduce the number if send() calls */ |
| 2947 |
result = Curl_add_buffer(&req_buffer, data->set.postfields, |
| 2948 |
(size_t)postsize); |
| 2949 |
included_body = postsize; |
| 2950 |
} |
| 2951 |
else { |
| 2952 |
if(postsize) { |
| 2953 |
/* Append the POST data chunky-style */ |
| 2954 |
result = Curl_add_bufferf(&req_buffer, "%x\r\n", (int)postsize); |
| 2955 |
if(!result) { |
| 2956 |
result = Curl_add_buffer(&req_buffer, data->set.postfields, |
| 2957 |
(size_t)postsize); |
| 2958 |
if(!result) |
| 2959 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); |
| 2960 |
included_body = postsize + 2; |
| 2961 |
} |
| 2962 |
} |
| 2963 |
if(!result) |
| 2964 |
result = Curl_add_buffer(&req_buffer, "\x30\x0d\x0a\x0d\x0a", 5); |
| 2965 |
/* 0 CR LF CR LF */ |
| 2966 |
included_body += 5; |
| 2967 |
} |
| 2968 |
if(result) |
| 2969 |
return result; |
| 2970 |
/* Make sure the progress information is accurate */ |
| 2971 |
Curl_pgrsSetUploadSize(data, postsize); |
| 2972 |
} |
| 2973 |
else { |
| 2974 |
/* A huge POST coming up, do data separate from the request */ |
| 2975 |
http->postsize = postsize; |
| 2976 |
http->postdata = data->set.postfields; |
| 2977 |
|
| 2978 |
http->sending = HTTPSEND_BODY; |
| 2979 |
|
| 2980 |
data->state.fread_func = (curl_read_callback)readmoredata; |
| 2981 |
data->state.in = (void *)conn; |
| 2982 |
|
| 2983 |
/* set the upload size to the progress meter */ |
| 2984 |
Curl_pgrsSetUploadSize(data, http->postsize); |
| 2985 |
|
| 2986 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); /* end of headers! */ |
| 2987 |
if(result) |
| 2988 |
return result; |
| 2989 |
} |
| 2990 |
} |
| 2991 |
else { |
| 2992 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); /* end of headers! */ |
| 2993 |
if(result) |
| 2994 |
return result; |
| 2995 |
|
| 2996 |
if(data->req.upload_chunky && conn->bits.authneg) { |
| 2997 |
/* Chunky upload is selected and we're negotiating auth still, send |
| 2998 |
end-of-data only */ |
| 2999 |
result = Curl_add_buffer(&req_buffer, |
| 3000 |
"\x30\x0d\x0a\x0d\x0a", 5); |
| 3001 |
/* 0 CR LF CR LF */ |
| 3002 |
if(result) |
| 3003 |
return result; |
| 3004 |
} |
| 3005 |
|
| 3006 |
else if(data->state.infilesize) { |
| 3007 |
/* set the upload size to the progress meter */ |
| 3008 |
Curl_pgrsSetUploadSize(data, postsize?postsize:-1); |
| 3009 |
|
| 3010 |
/* set the pointer to mark that we will send the post body using the |
| 3011 |
read callback, but only if we're not in authenticate |
| 3012 |
negotiation */ |
| 3013 |
if(!conn->bits.authneg) { |
| 3014 |
http->postdata = (char *)&http->postdata; |
| 3015 |
http->postsize = postsize; |
| 3016 |
} |
| 3017 |
} |
| 3018 |
} |
| 3019 |
/* issue the request */ |
| 3020 |
result = Curl_add_buffer_send(&req_buffer, conn, &data->info.request_size, |
| 3021 |
(size_t)included_body, FIRSTSOCKET); |
| 3022 |
|
| 3023 |
if(result) |
| 3024 |
failf(data, "Failed sending HTTP POST request"); |
| 3025 |
else |
| 3026 |
Curl_setup_transfer(data, FIRSTSOCKET, -1, TRUE, |
| 3027 |
http->postdata?FIRSTSOCKET:-1); |
| 3028 |
break; |
| 3029 |
|
| 3030 |
default: |
| 3031 |
result = Curl_add_buffer(&req_buffer, "\r\n", 2); |
| 3032 |
if(result) |
| 3033 |
return result; |
| 3034 |
|
| 3035 |
/* issue the request */ |
| 3036 |
result = Curl_add_buffer_send(&req_buffer, conn, |
| 3037 |
&data->info.request_size, 0, FIRSTSOCKET); |
| 3038 |
|
| 3039 |
if(result) |
| 3040 |
failf(data, "Failed sending HTTP request"); |
| 3041 |
else |
| 3042 |
/* HTTP GET/HEAD download: */ |
| 3043 |
Curl_setup_transfer(data, FIRSTSOCKET, -1, TRUE, -1); |
| 3044 |
} |
| 3045 |
if(result) |
| 3046 |
return result; |
| 3047 |
if(!postsize) |
| 3048 |
data->req.upload_done = TRUE; |
| 3049 |
|
| 3050 |
if(data->req.writebytecount) { |
| 3051 |
/* if a request-body has been sent off, we make sure this progress is noted |
| 3052 |
properly */ |
| 3053 |
Curl_pgrsSetUploadCounter(data, data->req.writebytecount); |
| 3054 |
if(Curl_pgrsUpdate(conn)) |
| 3055 |
result = CURLE_ABORTED_BY_CALLBACK; |
| 3056 |
|
| 3057 |
if(data->req.writebytecount >= postsize) { |
| 3058 |
/* already sent the entire request body, mark the "upload" as |
| 3059 |
complete */ |
| 3060 |
infof(data, "upload completely sent off: %" CURL_FORMAT_CURL_OFF_T |
| 3061 |
" out of %" CURL_FORMAT_CURL_OFF_T " bytes\n", |
| 3062 |
data->req.writebytecount, postsize); |
| 3063 |
data->req.upload_done = TRUE; |
| 3064 |
data->req.keepon &= ~KEEP_SEND; /* we're done writing */ |
| 3065 |
data->req.exp100 = EXP100_SEND_DATA; /* already sent */ |
| 3066 |
Curl_expire_done(data, EXPIRE_100_TIMEOUT); |
| 3067 |
} |
| 3068 |
} |
| 3069 |
|
| 3070 |
if((conn->httpversion == 20) && data->req.upload_chunky) |
| 3071 |
/* upload_chunky was set above to set up the request in a chunky fashion, |
| 3072 |
but is disabled here again to avoid that the chunked encoded version is |
| 3073 |
actually used when sending the request body over h2 */ |
| 3074 |
data->req.upload_chunky = FALSE; |
| 3075 |
return result; |
| 3076 |
} |
| 3077 |
|
| 3078 |
typedef enum { |
| 3079 |
STATUS_UNKNOWN, /* not enough data to tell yet */ |
| 3080 |
STATUS_DONE, /* a status line was read */ |
| 3081 |
STATUS_BAD /* not a status line */ |
| 3082 |
} statusline; |
| 3083 |
|
| 3084 |
|
| 3085 |
/* Check a string for a prefix. Check no more than 'len' bytes */ |
| 3086 |
static bool checkprefixmax(const char *prefix, const char *buffer, size_t len) |
| 3087 |
{ |
| 3088 |
size_t ch = CURLMIN(strlen(prefix), len); |
| 3089 |
return curl_strnequal(prefix, buffer, ch); |
| 3090 |
} |
| 3091 |
|
| 3092 |
/* |
| 3093 |
* checkhttpprefix() |
| 3094 |
* |
| 3095 |
* Returns TRUE if member of the list matches prefix of string |
| 3096 |
*/ |
| 3097 |
static statusline |
| 3098 |
checkhttpprefix(struct Curl_easy *data, |
| 3099 |
const char *s, size_t len) |
| 3100 |
{ |
| 3101 |
struct curl_slist *head = data->set.http200aliases; |
| 3102 |
statusline rc = STATUS_BAD; |
| 3103 |
statusline onmatch = len >= 5? STATUS_DONE : STATUS_UNKNOWN; |
| 3104 |
#ifdef CURL_DOES_CONVERSIONS |
| 3105 |
/* convert from the network encoding using a scratch area */ |
| 3106 |
char *scratch = strdup(s); |
| 3107 |
if(NULL == scratch) { |
| 3108 |
failf(data, "Failed to allocate memory for conversion!"); |
| 3109 |
return FALSE; /* can't return CURLE_OUT_OF_MEMORY so return FALSE */ |
| 3110 |
} |
| 3111 |
if(CURLE_OK != Curl_convert_from_network(data, scratch, strlen(s) + 1)) { |
| 3112 |
/* Curl_convert_from_network calls failf if unsuccessful */ |
| 3113 |
free(scratch); |
| 3114 |
return FALSE; /* can't return CURLE_foobar so return FALSE */ |
| 3115 |
} |
| 3116 |
s = scratch; |
| 3117 |
#endif /* CURL_DOES_CONVERSIONS */ |
| 3118 |
|
| 3119 |
while(head) { |
| 3120 |
if(checkprefixmax(head->data, s, len)) { |
| 3121 |
rc = onmatch; |
| 3122 |
break; |
| 3123 |
} |
| 3124 |
head = head->next; |
| 3125 |
} |
| 3126 |
|
| 3127 |
if((rc != STATUS_DONE) && (checkprefixmax("HTTP/", s, len))) |
| 3128 |
rc = onmatch; |
| 3129 |
|
| 3130 |
#ifdef CURL_DOES_CONVERSIONS |
| 3131 |
free(scratch); |
| 3132 |
#endif /* CURL_DOES_CONVERSIONS */ |
| 3133 |
return rc; |
| 3134 |
} |
| 3135 |
|
| 3136 |
#ifndef CURL_DISABLE_RTSP |
| 3137 |
static statusline |
| 3138 |
checkrtspprefix(struct Curl_easy *data, |
| 3139 |
const char *s, size_t len) |
| 3140 |
{ |
| 3141 |
statusline result = STATUS_BAD; |
| 3142 |
statusline onmatch = len >= 5? STATUS_DONE : STATUS_UNKNOWN; |
| 3143 |
|
| 3144 |
#ifdef CURL_DOES_CONVERSIONS |
| 3145 |
/* convert from the network encoding using a scratch area */ |
| 3146 |
char *scratch = strdup(s); |
| 3147 |
if(NULL == scratch) { |
| 3148 |
failf(data, "Failed to allocate memory for conversion!"); |
| 3149 |
return FALSE; /* can't return CURLE_OUT_OF_MEMORY so return FALSE */ |
| 3150 |
} |
| 3151 |
if(CURLE_OK != Curl_convert_from_network(data, scratch, strlen(s) + 1)) { |
| 3152 |
/* Curl_convert_from_network calls failf if unsuccessful */ |
| 3153 |
result = FALSE; /* can't return CURLE_foobar so return FALSE */ |
| 3154 |
} |
| 3155 |
else if(checkprefixmax("RTSP/", scratch, len)) |
| 3156 |
result = onmatch; |
| 3157 |
free(scratch); |
| 3158 |
#else |
| 3159 |
(void)data; /* unused */ |
| 3160 |
if(checkprefixmax("RTSP/", s, len)) |
| 3161 |
result = onmatch; |
| 3162 |
#endif /* CURL_DOES_CONVERSIONS */ |
| 3163 |
|
| 3164 |
return result; |
| 3165 |
} |
| 3166 |
#endif /* CURL_DISABLE_RTSP */ |
| 3167 |
|
| 3168 |
static statusline |
| 3169 |
checkprotoprefix(struct Curl_easy *data, struct connectdata *conn, |
| 3170 |
const char *s, size_t len) |
| 3171 |
{ |
| 3172 |
#ifndef CURL_DISABLE_RTSP |
| 3173 |
if(conn->handler->protocol & CURLPROTO_RTSP) |
| 3174 |
return checkrtspprefix(data, s, len); |
| 3175 |
#else |
| 3176 |
(void)conn; |
| 3177 |
#endif /* CURL_DISABLE_RTSP */ |
| 3178 |
|
| 3179 |
return checkhttpprefix(data, s, len); |
| 3180 |
} |
| 3181 |
|
| 3182 |
/* |
| 3183 |
* header_append() copies a chunk of data to the end of the already received |
| 3184 |
* header. We make sure that the full string fit in the allocated header |
| 3185 |
* buffer, or else we enlarge it. |
| 3186 |
*/ |
| 3187 |
static CURLcode header_append(struct Curl_easy *data, |
| 3188 |
struct SingleRequest *k, |
| 3189 |
size_t length) |
| 3190 |
{ |
| 3191 |
/* length is at most the size of a full read buffer, for which the upper |
| 3192 |
bound is CURL_MAX_READ_SIZE. There is thus no chance of overflow in this |
| 3193 |
calculation. */ |
| 3194 |
size_t newsize = k->hbuflen + length; |
| 3195 |
if(newsize > CURL_MAX_HTTP_HEADER) { |
| 3196 |
/* The reason to have a max limit for this is to avoid the risk of a bad |
| 3197 |
server feeding libcurl with a never-ending header that will cause |
| 3198 |
reallocs infinitely */ |
| 3199 |
failf(data, "Rejected %zu bytes header (max is %d)!", newsize, |
| 3200 |
CURL_MAX_HTTP_HEADER); |
| 3201 |
return CURLE_OUT_OF_MEMORY; |
| 3202 |
} |
| 3203 |
if(newsize >= data->state.headersize) { |
| 3204 |
/* We enlarge the header buffer as it is too small */ |
| 3205 |
char *newbuff; |
| 3206 |
size_t hbufp_index; |
| 3207 |
|
| 3208 |
newsize = CURLMAX((k->hbuflen + length) * 3 / 2, data->state.headersize*2); |
| 3209 |
hbufp_index = k->hbufp - data->state.headerbuff; |
| 3210 |
newbuff = realloc(data->state.headerbuff, newsize); |
| 3211 |
if(!newbuff) { |
| 3212 |
failf(data, "Failed to alloc memory for big header!"); |
| 3213 |
return CURLE_OUT_OF_MEMORY; |
| 3214 |
} |
| 3215 |
data->state.headersize = newsize; |
| 3216 |
data->state.headerbuff = newbuff; |
| 3217 |
k->hbufp = data->state.headerbuff + hbufp_index; |
| 3218 |
} |
| 3219 |
memcpy(k->hbufp, k->str_start, length); |
| 3220 |
k->hbufp += length; |
| 3221 |
k->hbuflen += length; |
| 3222 |
*k->hbufp = 0; |
| 3223 |
|
| 3224 |
return CURLE_OK; |
| 3225 |
} |
| 3226 |
|
| 3227 |
static void print_http_error(struct Curl_easy *data) |
| 3228 |
{ |
| 3229 |
struct SingleRequest *k = &data->req; |
| 3230 |
char *beg = k->p; |
| 3231 |
|
| 3232 |
/* make sure that data->req.p points to the HTTP status line */ |
| 3233 |
if(!strncmp(beg, "HTTP", 4)) { |
| 3234 |
|
| 3235 |
/* skip to HTTP status code */ |
| 3236 |
beg = strchr(beg, ' '); |
| 3237 |
if(beg && *++beg) { |
| 3238 |
|
| 3239 |
/* find trailing CR */ |
| 3240 |
char end_char = '\r'; |
| 3241 |
char *end = strchr(beg, end_char); |
| 3242 |
if(!end) { |
| 3243 |
/* try to find LF (workaround for non-compliant HTTP servers) */ |
| 3244 |
end_char = '\n'; |
| 3245 |
end = strchr(beg, end_char); |
| 3246 |
} |
| 3247 |
|
| 3248 |
if(end) { |
| 3249 |
/* temporarily replace CR or LF by NUL and print the error message */ |
| 3250 |
*end = '\0'; |
| 3251 |
failf(data, "The requested URL returned error: %s", beg); |
| 3252 |
|
| 3253 |
/* restore the previously replaced CR or LF */ |
| 3254 |
*end = end_char; |
| 3255 |
return; |
| 3256 |
} |
| 3257 |
} |
| 3258 |
} |
| 3259 |
|
| 3260 |
/* fall-back to printing the HTTP status code only */ |
| 3261 |
failf(data, "The requested URL returned error: %d", k->httpcode); |
| 3262 |
} |
| 3263 |
|
| 3264 |
/* |
| 3265 |
* Read any HTTP header lines from the server and pass them to the client app. |
| 3266 |
*/ |
| 3267 |
CURLcode Curl_http_readwrite_headers(struct Curl_easy *data, |
| 3268 |
struct connectdata *conn, |
| 3269 |
ssize_t *nread, |
| 3270 |
bool *stop_reading) |
| 3271 |
{ |
| 3272 |
CURLcode result; |
| 3273 |
struct SingleRequest *k = &data->req; |
| 3274 |
ssize_t onread = *nread; |
| 3275 |
char *ostr = k->str; |
| 3276 |
|
| 3277 |
/* header line within buffer loop */ |
| 3278 |
do { |
| 3279 |
size_t rest_length; |
| 3280 |
size_t full_length; |
| 3281 |
int writetype; |
| 3282 |
|
| 3283 |
/* str_start is start of line within buf */ |
| 3284 |
k->str_start = k->str; |
| 3285 |
|
| 3286 |
/* data is in network encoding so use 0x0a instead of '\n' */ |
| 3287 |
k->end_ptr = memchr(k->str_start, 0x0a, *nread); |
| 3288 |
|
| 3289 |
if(!k->end_ptr) { |
| 3290 |
/* Not a complete header line within buffer, append the data to |
| 3291 |
the end of the headerbuff. */ |
| 3292 |
result = header_append(data, k, *nread); |
| 3293 |
if(result) |
| 3294 |
return result; |
| 3295 |
|
| 3296 |
if(!k->headerline) { |
| 3297 |
/* check if this looks like a protocol header */ |
| 3298 |
statusline st = checkprotoprefix(data, conn, data->state.headerbuff, |
| 3299 |
k->hbuflen); |
| 3300 |
if(st == STATUS_BAD) { |
| 3301 |
/* this is not the beginning of a protocol first header line */ |
| 3302 |
k->header = FALSE; |
| 3303 |
k->badheader = HEADER_ALLBAD; |
| 3304 |
streamclose(conn, "bad HTTP: No end-of-message indicator"); |
| 3305 |
if(!data->set.http09_allowed) { |
| 3306 |
failf(data, "Received HTTP/0.9 when not allowed\n"); |
| 3307 |
return CURLE_UNSUPPORTED_PROTOCOL; |
| 3308 |
} |
| 3309 |
break; |
| 3310 |
} |
| 3311 |
} |
| 3312 |
|
| 3313 |
break; /* read more and try again */ |
| 3314 |
} |
| 3315 |
|
| 3316 |
/* decrease the size of the remaining (supposed) header line */ |
| 3317 |
rest_length = (k->end_ptr - k->str) + 1; |
| 3318 |
*nread -= (ssize_t)rest_length; |
| 3319 |
|
| 3320 |
k->str = k->end_ptr + 1; /* move past new line */ |
| 3321 |
|
| 3322 |
full_length = k->str - k->str_start; |
| 3323 |
|
| 3324 |
result = header_append(data, k, full_length); |
| 3325 |
if(result) |
| 3326 |
return result; |
| 3327 |
|
| 3328 |
k->end_ptr = k->hbufp; |
| 3329 |
k->p = data->state.headerbuff; |
| 3330 |
|
| 3331 |
/**** |
| 3332 |
* We now have a FULL header line that p points to |
| 3333 |
*****/ |
| 3334 |
|
| 3335 |
if(!k->headerline) { |
| 3336 |
/* the first read header */ |
| 3337 |
statusline st = checkprotoprefix(data, conn, data->state.headerbuff, |
| 3338 |
k->hbuflen); |
| 3339 |
if(st == STATUS_BAD) { |
| 3340 |
streamclose(conn, "bad HTTP: No end-of-message indicator"); |
| 3341 |
/* this is not the beginning of a protocol first header line */ |
| 3342 |
if(!data->set.http09_allowed) { |
| 3343 |
failf(data, "Received HTTP/0.9 when not allowed\n"); |
| 3344 |
return CURLE_UNSUPPORTED_PROTOCOL; |
| 3345 |
} |
| 3346 |
k->header = FALSE; |
| 3347 |
if(*nread) |
| 3348 |
/* since there's more, this is a partial bad header */ |
| 3349 |
k->badheader = HEADER_PARTHEADER; |
| 3350 |
else { |
| 3351 |
/* this was all we read so it's all a bad header */ |
| 3352 |
k->badheader = HEADER_ALLBAD; |
| 3353 |
*nread = onread; |
| 3354 |
k->str = ostr; |
| 3355 |
return CURLE_OK; |
| 3356 |
} |
| 3357 |
break; |
| 3358 |
} |
| 3359 |
} |
| 3360 |
|
| 3361 |
/* headers are in network encoding so |
| 3362 |
use 0x0a and 0x0d instead of '\n' and '\r' */ |
| 3363 |
if((0x0a == *k->p) || (0x0d == *k->p)) { |
| 3364 |
size_t headerlen; |
| 3365 |
/* Zero-length header line means end of headers! */ |
| 3366 |
|
| 3367 |
#ifdef CURL_DOES_CONVERSIONS |
| 3368 |
if(0x0d == *k->p) { |
| 3369 |
*k->p = '\r'; /* replace with CR in host encoding */ |
| 3370 |
k->p++; /* pass the CR byte */ |
| 3371 |
} |
| 3372 |
if(0x0a == *k->p) { |
| 3373 |
*k->p = '\n'; /* replace with LF in host encoding */ |
| 3374 |
k->p++; /* pass the LF byte */ |
| 3375 |
} |
| 3376 |
#else |
| 3377 |
if('\r' == *k->p) |
| 3378 |
k->p++; /* pass the \r byte */ |
| 3379 |
if('\n' == *k->p) |
| 3380 |
k->p++; /* pass the \n byte */ |
| 3381 |
#endif /* CURL_DOES_CONVERSIONS */ |
| 3382 |
|
| 3383 |
if(100 <= k->httpcode && 199 >= k->httpcode) { |
| 3384 |
/* "A user agent MAY ignore unexpected 1xx status responses." */ |
| 3385 |
switch(k->httpcode) { |
| 3386 |
case 100: |
| 3387 |
/* |
| 3388 |
* We have made a HTTP PUT or POST and this is 1.1-lingo |
| 3389 |
* that tells us that the server is OK with this and ready |
| 3390 |
* to receive the data. |
| 3391 |
* However, we'll get more headers now so we must get |
| 3392 |
* back into the header-parsing state! |
| 3393 |
*/ |
| 3394 |
k->header = TRUE; |
| 3395 |
k->headerline = 0; /* restart the header line counter */ |
| 3396 |
|
| 3397 |
/* if we did wait for this do enable write now! */ |
| 3398 |
if(k->exp100 > EXP100_SEND_DATA) { |
| 3399 |
k->exp100 = EXP100_SEND_DATA; |
| 3400 |
k->keepon |= KEEP_SEND; |
| 3401 |
Curl_expire_done(data, EXPIRE_100_TIMEOUT); |
| 3402 |
} |
| 3403 |
break; |
| 3404 |
case 101: |
| 3405 |
/* Switching Protocols */ |
| 3406 |
if(k->upgr101 == UPGR101_REQUESTED) { |
| 3407 |
/* Switching to HTTP/2 */ |
| 3408 |
infof(data, "Received 101\n"); |
| 3409 |
k->upgr101 = UPGR101_RECEIVED; |
| 3410 |
|
| 3411 |
/* we'll get more headers (HTTP/2 response) */ |
| 3412 |
k->header = TRUE; |
| 3413 |
k->headerline = 0; /* restart the header line counter */ |
| 3414 |
|
| 3415 |
/* switch to http2 now. The bytes after response headers |
| 3416 |
are also processed here, otherwise they are lost. */ |
| 3417 |
result = Curl_http2_switched(conn, k->str, *nread); |
| 3418 |
if(result) |
| 3419 |
return result; |
| 3420 |
*nread = 0; |
| 3421 |
} |
| 3422 |
else { |
| 3423 |
/* Switching to another protocol (e.g. WebSocket) */ |
| 3424 |
k->header = FALSE; /* no more header to parse! */ |
| 3425 |
} |
| 3426 |
break; |
| 3427 |
default: |
| 3428 |
/* the status code 1xx indicates a provisional response, so |
| 3429 |
we'll get another set of headers */ |
| 3430 |
k->header = TRUE; |
| 3431 |
k->headerline = 0; /* restart the header line counter */ |
| 3432 |
break; |
| 3433 |
} |
| 3434 |
} |
| 3435 |
else { |
| 3436 |
k->header = FALSE; /* no more header to parse! */ |
| 3437 |
|
| 3438 |
if((k->size == -1) && !k->chunk && !conn->bits.close && |
| 3439 |
(conn->httpversion == 11) && |
| 3440 |
!(conn->handler->protocol & CURLPROTO_RTSP) && |
| 3441 |
data->set.httpreq != HTTPREQ_HEAD) { |
| 3442 |
/* On HTTP 1.1, when connection is not to get closed, but no |
| 3443 |
Content-Length nor Transfer-Encoding chunked have been |
| 3444 |
received, according to RFC2616 section 4.4 point 5, we |
| 3445 |
assume that the server will close the connection to |
| 3446 |
signal the end of the document. */ |
| 3447 |
infof(data, "no chunk, no close, no size. Assume close to " |
| 3448 |
"signal end\n"); |
| 3449 |
streamclose(conn, "HTTP: No end-of-message indicator"); |
| 3450 |
} |
| 3451 |
} |
| 3452 |
|
| 3453 |
/* At this point we have some idea about the fate of the connection. |
| 3454 |
If we are closing the connection it may result auth failure. */ |
| 3455 |
#if defined(USE_NTLM) |
| 3456 |
if(conn->bits.close && |
| 3457 |
(((data->req.httpcode == 401) && |
| 3458 |
(conn->http_ntlm_state == NTLMSTATE_TYPE2)) || |
| 3459 |
((data->req.httpcode == 407) && |
| 3460 |
(conn->proxy_ntlm_state == NTLMSTATE_TYPE2)))) { |
| 3461 |
infof(data, "Connection closure while negotiating auth (HTTP 1.0?)\n"); |
| 3462 |
data->state.authproblem = TRUE; |
| 3463 |
} |
| 3464 |
#endif |
| 3465 |
#if defined(USE_SPNEGO) |
| 3466 |
if(conn->bits.close && |
| 3467 |
(((data->req.httpcode == 401) && |
| 3468 |
(conn->http_negotiate_state == GSS_AUTHRECV)) || |
| 3469 |
((data->req.httpcode == 407) && |
| 3470 |
(conn->proxy_negotiate_state == GSS_AUTHRECV)))) { |
| 3471 |
infof(data, "Connection closure while negotiating auth (HTTP 1.0?)\n"); |
| 3472 |
data->state.authproblem = TRUE; |
| 3473 |
} |
| 3474 |
if((conn->http_negotiate_state == GSS_AUTHDONE) && |
| 3475 |
(data->req.httpcode != 401)) { |
| 3476 |
conn->http_negotiate_state = GSS_AUTHSUCC; |
| 3477 |
} |
| 3478 |
if((conn->proxy_negotiate_state == GSS_AUTHDONE) && |
| 3479 |
(data->req.httpcode != 407)) { |
| 3480 |
conn->proxy_negotiate_state = GSS_AUTHSUCC; |
| 3481 |
} |
| 3482 |
#endif |
| 3483 |
/* |
| 3484 |
* When all the headers have been parsed, see if we should give |
| 3485 |
* up and return an error. |
| 3486 |
*/ |
| 3487 |
if(http_should_fail(conn)) { |
| 3488 |
failf(data, "The requested URL returned error: %d", |
| 3489 |
k->httpcode); |
| 3490 |
return CURLE_HTTP_RETURNED_ERROR; |
| 3491 |
} |
| 3492 |
|
| 3493 |
/* now, only output this if the header AND body are requested: |
| 3494 |
*/ |
| 3495 |
writetype = CLIENTWRITE_HEADER; |
| 3496 |
if(data->set.include_header) |
| 3497 |
writetype |= CLIENTWRITE_BODY; |
| 3498 |
|
| 3499 |
headerlen = k->p - data->state.headerbuff; |
| 3500 |
|
| 3501 |
result = Curl_client_write(conn, writetype, |
| 3502 |
data->state.headerbuff, |
| 3503 |
headerlen); |
| 3504 |
if(result) |
| 3505 |
return result; |
| 3506 |
|
| 3507 |
data->info.header_size += (long)headerlen; |
| 3508 |
data->req.headerbytecount += (long)headerlen; |
| 3509 |
|
| 3510 |
data->req.deductheadercount = |
| 3511 |
(100 <= k->httpcode && 199 >= k->httpcode)?data->req.headerbytecount:0; |
| 3512 |
|
| 3513 |
/* Curl_http_auth_act() checks what authentication methods |
| 3514 |
* that are available and decides which one (if any) to |
| 3515 |
* use. It will set 'newurl' if an auth method was picked. */ |
| 3516 |
result = Curl_http_auth_act(conn); |
| 3517 |
|
| 3518 |
if(result) |
| 3519 |
return result; |
| 3520 |
|
| 3521 |
if(k->httpcode >= 300) { |
| 3522 |
if((!conn->bits.authneg) && !conn->bits.close && |
| 3523 |
!conn->bits.rewindaftersend) { |
| 3524 |
/* |
| 3525 |
* General treatment of errors when about to send data. Including : |
| 3526 |
* "417 Expectation Failed", while waiting for 100-continue. |
| 3527 |
* |
| 3528 |
* The check for close above is done simply because of something |
| 3529 |
* else has already deemed the connection to get closed then |
| 3530 |
* something else should've considered the big picture and we |
| 3531 |
* avoid this check. |
| 3532 |
* |
| 3533 |
* rewindaftersend indicates that something has told libcurl to |
| 3534 |
* continue sending even if it gets discarded |
| 3535 |
*/ |
| 3536 |
|
| 3537 |
switch(data->set.httpreq) { |
| 3538 |
case HTTPREQ_PUT: |
| 3539 |
case HTTPREQ_POST: |
| 3540 |
case HTTPREQ_POST_FORM: |
| 3541 |
case HTTPREQ_POST_MIME: |
| 3542 |
/* We got an error response. If this happened before the whole |
| 3543 |
* request body has been sent we stop sending and mark the |
| 3544 |
* connection for closure after we've read the entire response. |
| 3545 |
*/ |
| 3546 |
Curl_expire_done(data, EXPIRE_100_TIMEOUT); |
| 3547 |
if(!k->upload_done) { |
| 3548 |
if((k->httpcode == 417) && data->state.expect100header) { |
| 3549 |
/* 417 Expectation Failed - try again without the Expect |
| 3550 |
header */ |
| 3551 |
infof(data, "Got 417 while waiting for a 100\n"); |
| 3552 |
data->state.disableexpect = TRUE; |
| 3553 |
DEBUGASSERT(!data->req.newurl); |
| 3554 |
data->req.newurl = strdup(conn->data->change.url); |
| 3555 |
Curl_done_sending(conn, k); |
| 3556 |
} |
| 3557 |
else if(data->set.http_keep_sending_on_error) { |
| 3558 |
infof(data, "HTTP error before end of send, keep sending\n"); |
| 3559 |
if(k->exp100 > EXP100_SEND_DATA) { |
| 3560 |
k->exp100 = EXP100_SEND_DATA; |
| 3561 |
k->keepon |= KEEP_SEND; |
| 3562 |
} |
| 3563 |
} |
| 3564 |
else { |
| 3565 |
infof(data, "HTTP error before end of send, stop sending\n"); |
| 3566 |
streamclose(conn, "Stop sending data before everything sent"); |
| 3567 |
result = Curl_done_sending(conn, k); |
| 3568 |
if(result) |
| 3569 |
return result; |
| 3570 |
k->upload_done = TRUE; |
| 3571 |
if(data->state.expect100header) |
| 3572 |
k->exp100 = EXP100_FAILED; |
| 3573 |
} |
| 3574 |
} |
| 3575 |
break; |
| 3576 |
|
| 3577 |
default: /* default label present to avoid compiler warnings */ |
| 3578 |
break; |
| 3579 |
} |
| 3580 |
} |
| 3581 |
|
| 3582 |
if(conn->bits.rewindaftersend) { |
| 3583 |
/* We rewind after a complete send, so thus we continue |
| 3584 |
sending now */ |
| 3585 |
infof(data, "Keep sending data to get tossed away!\n"); |
| 3586 |
k->keepon |= KEEP_SEND; |
| 3587 |
} |
| 3588 |
} |
| 3589 |
|
| 3590 |
if(!k->header) { |
| 3591 |
/* |
| 3592 |
* really end-of-headers. |
| 3593 |
* |
| 3594 |
* If we requested a "no body", this is a good time to get |
| 3595 |
* out and return home. |
| 3596 |
*/ |
| 3597 |
if(data->set.opt_no_body) |
| 3598 |
*stop_reading = TRUE; |
| 3599 |
#ifndef CURL_DISABLE_RTSP |
| 3600 |
else if((conn->handler->protocol & CURLPROTO_RTSP) && |
| 3601 |
(data->set.rtspreq == RTSPREQ_DESCRIBE) && |
| 3602 |
(k->size <= -1)) |
| 3603 |
/* Respect section 4.4 of rfc2326: If the Content-Length header is |
| 3604 |
absent, a length 0 must be assumed. It will prevent libcurl from |
| 3605 |
hanging on DESCRIBE request that got refused for whatever |
| 3606 |
reason */ |
| 3607 |
*stop_reading = TRUE; |
| 3608 |
#endif |
| 3609 |
else { |
| 3610 |
/* If we know the expected size of this document, we set the |
| 3611 |
maximum download size to the size of the expected |
| 3612 |
document or else, we won't know when to stop reading! |
| 3613 |
|
| 3614 |
Note that we set the download maximum even if we read a |
| 3615 |
"Connection: close" header, to make sure that |
| 3616 |
"Content-Length: 0" still prevents us from attempting to |
| 3617 |
read the (missing) response-body. |
| 3618 |
*/ |
| 3619 |
/* According to RFC2616 section 4.4, we MUST ignore |
| 3620 |
Content-Length: headers if we are now receiving data |
| 3621 |
using chunked Transfer-Encoding. |
| 3622 |
*/ |
| 3623 |
if(k->chunk) |
| 3624 |
k->maxdownload = k->size = -1; |
| 3625 |
} |
| 3626 |
if(-1 != k->size) { |
| 3627 |
/* We do this operation even if no_body is true, since this |
| 3628 |
data might be retrieved later with curl_easy_getinfo() |
| 3629 |
and its CURLINFO_CONTENT_LENGTH_DOWNLOAD option. */ |
| 3630 |
|
| 3631 |
Curl_pgrsSetDownloadSize(data, k->size); |
| 3632 |
k->maxdownload = k->size; |
| 3633 |
} |
| 3634 |
|
| 3635 |
/* If max download size is *zero* (nothing) we already have |
| 3636 |
nothing and can safely return ok now! But for HTTP/2, we'd |
| 3637 |
like to call http2_handle_stream_close to properly close a |
| 3638 |
stream. In order to do this, we keep reading until we |
| 3639 |
close the stream. */ |
| 3640 |
if(0 == k->maxdownload |
| 3641 |
#if defined(USE_NGHTTP2) |
| 3642 |
&& !((conn->handler->protocol & PROTO_FAMILY_HTTP) && |
| 3643 |
conn->httpversion == 20) |
| 3644 |
#endif |
| 3645 |
) |
| 3646 |
*stop_reading = TRUE; |
| 3647 |
|
| 3648 |
if(*stop_reading) { |
| 3649 |
/* we make sure that this socket isn't read more now */ |
| 3650 |
k->keepon &= ~KEEP_RECV; |
| 3651 |
} |
| 3652 |
|
| 3653 |
if(data->set.verbose) |
| 3654 |
Curl_debug(data, CURLINFO_HEADER_IN, |
| 3655 |
k->str_start, headerlen); |
| 3656 |
break; /* exit header line loop */ |
| 3657 |
} |
| 3658 |
|
| 3659 |
/* We continue reading headers, so reset the line-based |
| 3660 |
header parsing variables hbufp && hbuflen */ |
| 3661 |
k->hbufp = data->state.headerbuff; |
| 3662 |
k->hbuflen = 0; |
| 3663 |
continue; |
| 3664 |
} |
| 3665 |
|
| 3666 |
/* |
| 3667 |
* Checks for special headers coming up. |
| 3668 |
*/ |
| 3669 |
|
| 3670 |
if(!k->headerline++) { |
| 3671 |
/* This is the first header, it MUST be the error code line |
| 3672 |
or else we consider this to be the body right away! */ |
| 3673 |
int httpversion_major; |
| 3674 |
int rtspversion_major; |
| 3675 |
int nc = 0; |
| 3676 |
#ifdef CURL_DOES_CONVERSIONS |
| 3677 |
#define HEADER1 scratch |
| 3678 |
#define SCRATCHSIZE 21 |
| 3679 |
CURLcode res; |
| 3680 |
char scratch[SCRATCHSIZE + 1]; /* "HTTP/major.minor 123" */ |
| 3681 |
/* We can't really convert this yet because we |
| 3682 |
don't know if it's the 1st header line or the body. |
| 3683 |
So we do a partial conversion into a scratch area, |
| 3684 |
leaving the data at k->p as-is. |
| 3685 |
*/ |
| 3686 |
strncpy(&scratch[0], k->p, SCRATCHSIZE); |
| 3687 |
scratch[SCRATCHSIZE] = 0; /* null terminate */ |
| 3688 |
res = Curl_convert_from_network(data, |
| 3689 |
&scratch[0], |
| 3690 |
SCRATCHSIZE); |
| 3691 |
if(res) |
| 3692 |
/* Curl_convert_from_network calls failf if unsuccessful */ |
| 3693 |
return res; |
| 3694 |
#else |
| 3695 |
#define HEADER1 k->p /* no conversion needed, just use k->p */ |
| 3696 |
#endif /* CURL_DOES_CONVERSIONS */ |
| 3697 |
|
| 3698 |
if(conn->handler->protocol & PROTO_FAMILY_HTTP) { |
| 3699 |
/* |
| 3700 |
* https://tools.ietf.org/html/rfc7230#section-3.1.2 |
| 3701 |
* |
| 3702 |
* The response code is always a three-digit number in HTTP as the spec |
| 3703 |
* says. We try to allow any number here, but we cannot make |
| 3704 |
* guarantees on future behaviors since it isn't within the protocol. |
| 3705 |
*/ |
| 3706 |
char separator; |
| 3707 |
char twoorthree[2]; |
| 3708 |
nc = sscanf(HEADER1, |
| 3709 |
" HTTP/%1d.%1d%c%3d", |
| 3710 |
&httpversion_major, |
| 3711 |
&conn->httpversion, |
| 3712 |
&separator, |
| 3713 |
&k->httpcode); |
| 3714 |
|
| 3715 |
if(nc == 1 && httpversion_major >= 2 && |
| 3716 |
2 == sscanf(HEADER1, " HTTP/%1[23] %d", twoorthree, &k->httpcode)) { |
| 3717 |
conn->httpversion = 0; |
| 3718 |
nc = 4; |
| 3719 |
separator = ' '; |
| 3720 |
} |
| 3721 |
|
| 3722 |
if((nc == 4) && (' ' == separator)) { |
| 3723 |
conn->httpversion += 10 * httpversion_major; |
| 3724 |
|
| 3725 |
if(k->upgr101 == UPGR101_RECEIVED) { |
| 3726 |
/* supposedly upgraded to http2 now */ |
| 3727 |
if(conn->httpversion != 20) |
| 3728 |
infof(data, "Lying server, not serving HTTP/2\n"); |
| 3729 |
} |
| 3730 |
if(conn->httpversion < 20) { |
| 3731 |
conn->bundle->multiuse = BUNDLE_NO_MULTIUSE; |
| 3732 |
infof(data, "Mark bundle as not supporting multiuse\n"); |
| 3733 |
} |
| 3734 |
} |
| 3735 |
else if(!nc) { |
| 3736 |
/* this is the real world, not a Nirvana |
| 3737 |
NCSA 1.5.x returns this crap when asked for HTTP/1.1 |
| 3738 |
*/ |
| 3739 |
nc = sscanf(HEADER1, " HTTP %3d", &k->httpcode); |
| 3740 |
conn->httpversion = 10; |
| 3741 |
|
| 3742 |
/* If user has set option HTTP200ALIASES, |
| 3743 |
compare header line against list of aliases |
| 3744 |
*/ |
| 3745 |
if(!nc) { |
| 3746 |
if(checkhttpprefix(data, k->p, k->hbuflen) == STATUS_DONE) { |
| 3747 |
nc = 1; |
| 3748 |
k->httpcode = 200; |
| 3749 |
conn->httpversion = 10; |
| 3750 |
} |
| 3751 |
} |
| 3752 |
} |
| 3753 |
else { |
| 3754 |
failf(data, "Unsupported HTTP version in response"); |
| 3755 |
return CURLE_UNSUPPORTED_PROTOCOL; |
| 3756 |
} |
| 3757 |
} |
| 3758 |
else if(conn->handler->protocol & CURLPROTO_RTSP) { |
| 3759 |
char separator; |
| 3760 |
nc = sscanf(HEADER1, |
| 3761 |
" RTSP/%1d.%1d%c%3d", |
| 3762 |
&rtspversion_major, |
| 3763 |
&conn->rtspversion, |
| 3764 |
&separator, |
| 3765 |
&k->httpcode); |
| 3766 |
if((nc == 4) && (' ' == separator)) { |
| 3767 |
conn->rtspversion += 10 * rtspversion_major; |
| 3768 |
conn->httpversion = 11; /* For us, RTSP acts like HTTP 1.1 */ |
| 3769 |
} |
| 3770 |
else { |
| 3771 |
nc = 0; |
| 3772 |
} |
| 3773 |
} |
| 3774 |
|
| 3775 |
if(nc) { |
| 3776 |
data->info.httpcode = k->httpcode; |
| 3777 |
|
| 3778 |
data->info.httpversion = conn->httpversion; |
| 3779 |
if(!data->state.httpversion || |
| 3780 |
data->state.httpversion > conn->httpversion) |
| 3781 |
/* store the lowest server version we encounter */ |
| 3782 |
data->state.httpversion = conn->httpversion; |
| 3783 |
|
| 3784 |
/* |
| 3785 |
* This code executes as part of processing the header. As a |
| 3786 |
* result, it's not totally clear how to interpret the |
| 3787 |
* response code yet as that depends on what other headers may |
| 3788 |
* be present. 401 and 407 may be errors, but may be OK |
| 3789 |
* depending on how authentication is working. Other codes |
| 3790 |
* are definitely errors, so give up here. |
| 3791 |
*/ |
| 3792 |
if(data->state.resume_from && data->set.httpreq == HTTPREQ_GET && |
| 3793 |
k->httpcode == 416) { |
| 3794 |
/* "Requested Range Not Satisfiable", just proceed and |
| 3795 |
pretend this is no error */ |
| 3796 |
k->ignorebody = TRUE; /* Avoid appending error msg to good data. */ |
| 3797 |
} |
| 3798 |
else if(data->set.http_fail_on_error && (k->httpcode >= 400) && |
| 3799 |
((k->httpcode != 401) || !conn->bits.user_passwd) && |
| 3800 |
((k->httpcode != 407) || !conn->bits.proxy_user_passwd) ) { |
| 3801 |
/* serious error, go home! */ |
| 3802 |
print_http_error(data); |
| 3803 |
return CURLE_HTTP_RETURNED_ERROR; |
| 3804 |
} |
| 3805 |
|
| 3806 |
if(conn->httpversion == 10) { |
| 3807 |
/* Default action for HTTP/1.0 must be to close, unless |
| 3808 |
we get one of those fancy headers that tell us the |
| 3809 |
server keeps it open for us! */ |
| 3810 |
infof(data, "HTTP 1.0, assume close after body\n"); |
| 3811 |
connclose(conn, "HTTP/1.0 close after body"); |
| 3812 |
} |
| 3813 |
else if(conn->httpversion == 20 || |
| 3814 |
(k->upgr101 == UPGR101_REQUESTED && k->httpcode == 101)) { |
| 3815 |
DEBUGF(infof(data, "HTTP/2 found, allow multiplexing\n")); |
| 3816 |
|
| 3817 |
/* HTTP/2 cannot blacklist multiplexing since it is a core |
| 3818 |
functionality of the protocol */ |
| 3819 |
conn->bundle->multiuse = BUNDLE_MULTIPLEX; |
| 3820 |
} |
| 3821 |
else if(conn->httpversion >= 11 && |
| 3822 |
!conn->bits.close) { |
| 3823 |
/* If HTTP version is >= 1.1 and connection is persistent */ |
| 3824 |
DEBUGF(infof(data, |
| 3825 |
"HTTP 1.1 or later with persistent connection\n")); |
| 3826 |
} |
| 3827 |
|
| 3828 |
k->http_bodyless = k->httpcode >= 100 && k->httpcode < 200; |
| 3829 |
switch(k->httpcode) { |
| 3830 |
case 304: |
| 3831 |
/* (quote from RFC2616, section 10.3.5): The 304 response |
| 3832 |
* MUST NOT contain a message-body, and thus is always |
| 3833 |
* terminated by the first empty line after the header |
| 3834 |
* fields. */ |
| 3835 |
if(data->set.timecondition) |
| 3836 |
data->info.timecond = TRUE; |
| 3837 |
/* FALLTHROUGH */ |
| 3838 |
case 204: |
| 3839 |
/* (quote from RFC2616, section 10.2.5): The server has |
| 3840 |
* fulfilled the request but does not need to return an |
| 3841 |
* entity-body ... The 204 response MUST NOT include a |
| 3842 |
* message-body, and thus is always terminated by the first |
| 3843 |
* empty line after the header fields. */ |
| 3844 |
k->size = 0; |
| 3845 |
k->maxdownload = 0; |
| 3846 |
k->http_bodyless = TRUE; |
| 3847 |
break; |
| 3848 |
default: |
| 3849 |
break; |
| 3850 |
} |
| 3851 |
} |
| 3852 |
else { |
| 3853 |
k->header = FALSE; /* this is not a header line */ |
| 3854 |
break; |
| 3855 |
} |
| 3856 |
} |
| 3857 |
|
| 3858 |
result = Curl_convert_from_network(data, k->p, strlen(k->p)); |
| 3859 |
/* Curl_convert_from_network calls failf if unsuccessful */ |
| 3860 |
if(result) |
| 3861 |
return result; |
| 3862 |
|
| 3863 |
/* Check for Content-Length: header lines to get size */ |
| 3864 |
if(!k->http_bodyless && |
| 3865 |
!data->set.ignorecl && checkprefix("Content-Length:", k->p)) { |
| 3866 |
curl_off_t contentlength; |
| 3867 |
CURLofft offt = curlx_strtoofft(k->p + 15, NULL, 10, &contentlength); |
| 3868 |
|
| 3869 |
if(offt == CURL_OFFT_OK) { |
| 3870 |
if(data->set.max_filesize && |
| 3871 |
contentlength > data->set.max_filesize) { |
| 3872 |
failf(data, "Maximum file size exceeded"); |
| 3873 |
return CURLE_FILESIZE_EXCEEDED; |
| 3874 |
} |
| 3875 |
k->size = contentlength; |
| 3876 |
k->maxdownload = k->size; |
| 3877 |
/* we set the progress download size already at this point |
| 3878 |
just to make it easier for apps/callbacks to extract this |
| 3879 |
info as soon as possible */ |
| 3880 |
Curl_pgrsSetDownloadSize(data, k->size); |
| 3881 |
} |
| 3882 |
else if(offt == CURL_OFFT_FLOW) { |
| 3883 |
/* out of range */ |
| 3884 |
if(data->set.max_filesize) { |
| 3885 |
failf(data, "Maximum file size exceeded"); |
| 3886 |
return CURLE_FILESIZE_EXCEEDED; |
| 3887 |
} |
| 3888 |
streamclose(conn, "overflow content-length"); |
| 3889 |
infof(data, "Overflow Content-Length: value!\n"); |
| 3890 |
} |
| 3891 |
else { |
| 3892 |
/* negative or just rubbish - bad HTTP */ |
| 3893 |
failf(data, "Invalid Content-Length: value"); |
| 3894 |
return CURLE_WEIRD_SERVER_REPLY; |
| 3895 |
} |
| 3896 |
} |
| 3897 |
/* check for Content-Type: header lines to get the MIME-type */ |
| 3898 |
else if(checkprefix("Content-Type:", k->p)) { |
| 3899 |
char *contenttype = Curl_copy_header_value(k->p); |
| 3900 |
if(!contenttype) |
| 3901 |
return CURLE_OUT_OF_MEMORY; |
| 3902 |
if(!*contenttype) |
| 3903 |
/* ignore empty data */ |
| 3904 |
free(contenttype); |
| 3905 |
else { |
| 3906 |
Curl_safefree(data->info.contenttype); |
| 3907 |
data->info.contenttype = contenttype; |
| 3908 |
} |
| 3909 |
} |
| 3910 |
else if((conn->httpversion == 10) && |
| 3911 |
conn->bits.httpproxy && |
| 3912 |
Curl_compareheader(k->p, |
| 3913 |
"Proxy-Connection:", "keep-alive")) { |
| 3914 |
/* |
| 3915 |
* When a HTTP/1.0 reply comes when using a proxy, the |
| 3916 |
* 'Proxy-Connection: keep-alive' line tells us the |
| 3917 |
* connection will be kept alive for our pleasure. |
| 3918 |
* Default action for 1.0 is to close. |
| 3919 |
*/ |
| 3920 |
connkeep(conn, "Proxy-Connection keep-alive"); /* don't close */ |
| 3921 |
infof(data, "HTTP/1.0 proxy connection set to keep alive!\n"); |
| 3922 |
} |
| 3923 |
else if((conn->httpversion == 11) && |
| 3924 |
conn->bits.httpproxy && |
| 3925 |
Curl_compareheader(k->p, |
| 3926 |
"Proxy-Connection:", "close")) { |
| 3927 |
/* |
| 3928 |
* We get a HTTP/1.1 response from a proxy and it says it'll |
| 3929 |
* close down after this transfer. |
| 3930 |
*/ |
| 3931 |
connclose(conn, "Proxy-Connection: asked to close after done"); |
| 3932 |
infof(data, "HTTP/1.1 proxy connection set close!\n"); |
| 3933 |
} |
| 3934 |
else if((conn->httpversion == 10) && |
| 3935 |
Curl_compareheader(k->p, "Connection:", "keep-alive")) { |
| 3936 |
/* |
| 3937 |
* A HTTP/1.0 reply with the 'Connection: keep-alive' line |
| 3938 |
* tells us the connection will be kept alive for our |
| 3939 |
* pleasure. Default action for 1.0 is to close. |
| 3940 |
* |
| 3941 |
* [RFC2068, section 19.7.1] */ |
| 3942 |
connkeep(conn, "Connection keep-alive"); |
| 3943 |
infof(data, "HTTP/1.0 connection set to keep alive!\n"); |
| 3944 |
} |
| 3945 |
else if(Curl_compareheader(k->p, "Connection:", "close")) { |
| 3946 |
/* |
| 3947 |
* [RFC 2616, section 8.1.2.1] |
| 3948 |
* "Connection: close" is HTTP/1.1 language and means that |
| 3949 |
* the connection will close when this request has been |
| 3950 |
* served. |
| 3951 |
*/ |
| 3952 |
streamclose(conn, "Connection: close used"); |
| 3953 |
} |
| 3954 |
else if(!k->http_bodyless && checkprefix("Transfer-Encoding:", k->p)) { |
| 3955 |
/* One or more encodings. We check for chunked and/or a compression |
| 3956 |
algorithm. */ |
| 3957 |
/* |
| 3958 |
* [RFC 2616, section 3.6.1] A 'chunked' transfer encoding |
| 3959 |
* means that the server will send a series of "chunks". Each |
| 3960 |
* chunk starts with line with info (including size of the |
| 3961 |
* coming block) (terminated with CRLF), then a block of data |
| 3962 |
* with the previously mentioned size. There can be any amount |
| 3963 |
* of chunks, and a chunk-data set to zero signals the |
| 3964 |
* end-of-chunks. */ |
| 3965 |
|
| 3966 |
result = Curl_build_unencoding_stack(conn, k->p + 18, TRUE); |
| 3967 |
if(result) |
| 3968 |
return result; |
| 3969 |
} |
| 3970 |
else if(!k->http_bodyless && checkprefix("Content-Encoding:", k->p) && |
| 3971 |
data->set.str[STRING_ENCODING]) { |
| 3972 |
/* |
| 3973 |
* Process Content-Encoding. Look for the values: identity, |
| 3974 |
* gzip, deflate, compress, x-gzip and x-compress. x-gzip and |
| 3975 |
* x-compress are the same as gzip and compress. (Sec 3.5 RFC |
| 3976 |
* 2616). zlib cannot handle compress. However, errors are |
| 3977 |
* handled further down when the response body is processed |
| 3978 |
*/ |
| 3979 |
result = Curl_build_unencoding_stack(conn, k->p + 17, FALSE); |
| 3980 |
if(result) |
| 3981 |
return result; |
| 3982 |
} |
| 3983 |
else if(checkprefix("Retry-After:", k->p)) { |
| 3984 |
/* Retry-After = HTTP-date / delay-seconds */ |
| 3985 |
curl_off_t retry_after = 0; /* zero for unknown or "now" */ |
| 3986 |
time_t date = Curl_getdate_capped(&k->p[12]); |
| 3987 |
if(-1 == date) { |
| 3988 |
/* not a date, try it as a decimal number */ |
| 3989 |
(void)curlx_strtoofft(&k->p[12], NULL, 10, &retry_after); |
| 3990 |
} |
| 3991 |
else |
| 3992 |
/* convert date to number of seconds into the future */ |
| 3993 |
retry_after = date - time(NULL); |
| 3994 |
data->info.retry_after = retry_after; /* store it */ |
| 3995 |
} |
| 3996 |
else if(!k->http_bodyless && checkprefix("Content-Range:", k->p)) { |
| 3997 |
/* Content-Range: bytes [num]- |
| 3998 |
Content-Range: bytes: [num]- |
| 3999 |
Content-Range: [num]- |
| 4000 |
Content-Range: [asterisk]/[total] |
| 4001 |
|
| 4002 |
The second format was added since Sun's webserver |
| 4003 |
JavaWebServer/1.1.1 obviously sends the header this way! |
| 4004 |
The third added since some servers use that! |
| 4005 |
The forth means the requested range was unsatisfied. |
| 4006 |
*/ |
| 4007 |
|
| 4008 |
char *ptr = k->p + 14; |
| 4009 |
|
| 4010 |
/* Move forward until first digit or asterisk */ |
| 4011 |
while(*ptr && !ISDIGIT(*ptr) && *ptr != '*') |
| 4012 |
ptr++; |
| 4013 |
|
| 4014 |
/* if it truly stopped on a digit */ |
| 4015 |
if(ISDIGIT(*ptr)) { |
| 4016 |
if(!curlx_strtoofft(ptr, NULL, 10, &k->offset)) { |
| 4017 |
if(data->state.resume_from == k->offset) |
| 4018 |
/* we asked for a resume and we got it */ |
| 4019 |
k->content_range = TRUE; |
| 4020 |
} |
| 4021 |
} |
| 4022 |
else |
| 4023 |
data->state.resume_from = 0; /* get everything */ |
| 4024 |
} |
| 4025 |
#if !defined(CURL_DISABLE_COOKIES) |
| 4026 |
else if(data->cookies && data->state.cookie_engine && |
| 4027 |
checkprefix("Set-Cookie:", k->p)) { |
| 4028 |
Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, |
| 4029 |
CURL_LOCK_ACCESS_SINGLE); |
| 4030 |
Curl_cookie_add(data, |
| 4031 |
data->cookies, TRUE, FALSE, k->p + 11, |
| 4032 |
/* If there is a custom-set Host: name, use it |
| 4033 |
here, or else use real peer host name. */ |
| 4034 |
conn->allocptr.cookiehost? |
| 4035 |
conn->allocptr.cookiehost:conn->host.name, |
| 4036 |
data->state.up.path, |
| 4037 |
(conn->handler->protocol&CURLPROTO_HTTPS)? |
| 4038 |
TRUE:FALSE); |
| 4039 |
Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE); |
| 4040 |
} |
| 4041 |
#endif |
| 4042 |
else if(!k->http_bodyless && checkprefix("Last-Modified:", k->p) && |
| 4043 |
(data->set.timecondition || data->set.get_filetime) ) { |
| 4044 |
k->timeofdoc = Curl_getdate_capped(k->p + strlen("Last-Modified:")); |
| 4045 |
if(data->set.get_filetime) |
| 4046 |
data->info.filetime = k->timeofdoc; |
| 4047 |
} |
| 4048 |
else if((checkprefix("WWW-Authenticate:", k->p) && |
| 4049 |
(401 == k->httpcode)) || |
| 4050 |
(checkprefix("Proxy-authenticate:", k->p) && |
| 4051 |
(407 == k->httpcode))) { |
| 4052 |
|
| 4053 |
bool proxy = (k->httpcode == 407) ? TRUE : FALSE; |
| 4054 |
char *auth = Curl_copy_header_value(k->p); |
| 4055 |
if(!auth) |
| 4056 |
return CURLE_OUT_OF_MEMORY; |
| 4057 |
|
| 4058 |
result = Curl_http_input_auth(conn, proxy, auth); |
| 4059 |
|
| 4060 |
free(auth); |
| 4061 |
|
| 4062 |
if(result) |
| 4063 |
return result; |
| 4064 |
} |
| 4065 |
#ifdef USE_SPNEGO |
| 4066 |
else if(checkprefix("Persistent-Auth", k->p)) { |
| 4067 |
struct negotiatedata *negdata = &conn->negotiate; |
| 4068 |
struct auth *authp = &data->state.authhost; |
| 4069 |
if(authp->picked == CURLAUTH_NEGOTIATE) { |
| 4070 |
char *persistentauth = Curl_copy_header_value(k->p); |
| 4071 |
if(!persistentauth) |
| 4072 |
return CURLE_OUT_OF_MEMORY; |
| 4073 |
negdata->noauthpersist = checkprefix("false", persistentauth)? |
| 4074 |
TRUE:FALSE; |
| 4075 |
negdata->havenoauthpersist = TRUE; |
| 4076 |
infof(data, "Negotiate: noauthpersist -> %d, header part: %s", |
| 4077 |
negdata->noauthpersist, persistentauth); |
| 4078 |
free(persistentauth); |
| 4079 |
} |
| 4080 |
} |
| 4081 |
#endif |
| 4082 |
else if((k->httpcode >= 300 && k->httpcode < 400) && |
| 4083 |
checkprefix("Location:", k->p) && |
| 4084 |
!data->req.location) { |
| 4085 |
/* this is the URL that the server advises us to use instead */ |
| 4086 |
char *location = Curl_copy_header_value(k->p); |
| 4087 |
if(!location) |
| 4088 |
return CURLE_OUT_OF_MEMORY; |
| 4089 |
if(!*location) |
| 4090 |
/* ignore empty data */ |
| 4091 |
free(location); |
| 4092 |
else { |
| 4093 |
data->req.location = location; |
| 4094 |
|
| 4095 |
if(data->set.http_follow_location) { |
| 4096 |
DEBUGASSERT(!data->req.newurl); |
| 4097 |
data->req.newurl = strdup(data->req.location); /* clone */ |
| 4098 |
if(!data->req.newurl) |
| 4099 |
return CURLE_OUT_OF_MEMORY; |
| 4100 |
|
| 4101 |
/* some cases of POST and PUT etc needs to rewind the data |
| 4102 |
stream at this point */ |
| 4103 |
result = http_perhapsrewind(conn); |
| 4104 |
if(result) |
| 4105 |
return result; |
| 4106 |
} |
| 4107 |
} |
| 4108 |
} |
| 4109 |
#ifdef USE_ALTSVC |
| 4110 |
/* If enabled, the header is incoming and this is over HTTPS */ |
| 4111 |
else if(data->asi && checkprefix("Alt-Svc:", k->p) && |
| 4112 |
((conn->handler->flags & PROTOPT_SSL) || |
| 4113 |
#ifdef CURLDEBUG |
| 4114 |
/* allow debug builds to circumvent the HTTPS restriction */ |
| 4115 |
getenv("CURL_ALTSVC_HTTP") |
| 4116 |
#else |
| 4117 |
0 |
| 4118 |
#endif |
| 4119 |
)) { |
| 4120 |
/* the ALPN of the current request */ |
| 4121 |
enum alpnid id = (conn->httpversion == 20) ? ALPN_h2 : ALPN_h1; |
| 4122 |
result = Curl_altsvc_parse(data, data->asi, |
| 4123 |
&k->p[ strlen("Alt-Svc:") ], |
| 4124 |
id, conn->host.name, |
| 4125 |
curlx_uitous(conn->remote_port)); |
| 4126 |
if(result) |
| 4127 |
return result; |
| 4128 |
} |
| 4129 |
#endif |
| 4130 |
else if(conn->handler->protocol & CURLPROTO_RTSP) { |
| 4131 |
result = Curl_rtsp_parseheader(conn, k->p); |
| 4132 |
if(result) |
| 4133 |
return result; |
| 4134 |
} |
| 4135 |
|
| 4136 |
/* |
| 4137 |
* End of header-checks. Write them to the client. |
| 4138 |
*/ |
| 4139 |
|
| 4140 |
writetype = CLIENTWRITE_HEADER; |
| 4141 |
if(data->set.include_header) |
| 4142 |
writetype |= CLIENTWRITE_BODY; |
| 4143 |
|
| 4144 |
if(data->set.verbose) |
| 4145 |
Curl_debug(data, CURLINFO_HEADER_IN, k->p, (size_t)k->hbuflen); |
| 4146 |
|
| 4147 |
result = Curl_client_write(conn, writetype, k->p, k->hbuflen); |
| 4148 |
if(result) |
| 4149 |
return result; |
| 4150 |
|
| 4151 |
data->info.header_size += (long)k->hbuflen; |
| 4152 |
data->req.headerbytecount += (long)k->hbuflen; |
| 4153 |
|
| 4154 |
/* reset hbufp pointer && hbuflen */ |
| 4155 |
k->hbufp = data->state.headerbuff; |
| 4156 |
k->hbuflen = 0; |
| 4157 |
} |
| 4158 |
while(*k->str); /* header line within buffer */ |
| 4159 |
|
| 4160 |
/* We might have reached the end of the header part here, but |
| 4161 |
there might be a non-header part left in the end of the read |
| 4162 |
buffer. */ |
| 4163 |
|
| 4164 |
return CURLE_OK; |
| 4165 |
} |
| 4166 |
|
| 4167 |
#endif /* CURL_DISABLE_HTTP */ |