| 1 |
--- |
| 2 |
features: |
| 3 |
- The SolidFire driver will recognize 4 new QoS spec keys |
| 4 |
to allow an administrator to specify QoS settings which |
| 5 |
are scaled by the size of the volume. 'ScaledIOPS' is a |
| 6 |
flag which will tell the driver to look for 'scaleMin', |
| 7 |
'scaleMax' and 'scaleBurst' which provide the scaling |
| 8 |
factor from the minimum values specified by the previous |
| 9 |
QoS keys ('minIOPS', 'maxIOPS', 'burstIOPS'). The |
| 10 |
administrator must take care to assure that no matter what |
| 11 |
the final calculated QoS values follow minIOPS <= maxIOPS |
| 12 |
<= burstIOPS. A exception will be thrown if not. The QoS |
| 13 |
settings are also checked against the cluster min and max |
| 14 |
allowed and truncated at the min or max if they exceed. |
| 15 |
fixes: |
| 16 |
- For SolidFire, QoS specs are now checked to make sure |
| 17 |
they fall within the min and max constraints. If not |
| 18 |
the QoS specs are capped at the min or max (i.e. if |
| 19 |
spec says 50 and minimum supported is 100, the driver |
| 20 |
will set it to 100). |