Debian Codegraph @

releasenotes/notes/fujitsu-qos-support-1c1528da06d0b38a.yaml

raw
1 ---
2 features:
3 - |
4 Fujitsu ETERNUS DX driver: Added support for QoS
5
6 What QoS settings are available depends upon the storage firmware version
7 of the ETERNUS AF/DX.
8
9 * When the storage firmware version is less than V11L30-0000,
10 only the upper limit of bandwidth(BWS) can be set using:
11
12 - ``maxBWS``
13
14 Note that when the firmware version of the ETERNUS AF/DX is earlier
15 than V11L30, upper limits for the volume QoS settings of
16 the ETERNUS AF/DX are set using predefined options. This means that
17 you should set the upper limit *of the ETERNUS AF/DX side* to a maximum
18 value that does not exceed the specified ``maxBWS``.
19
20 * When the storage firmware version is greater than V11L30-0000,
21 the IOPS/Throughput of Total/Read/Write for the volume can be set
22 separately using:
23
24 - ``read_bytes_sec``
25 - ``write_bytes_sec``
26 - ``total_bytes_sec``
27 - ``read_iops_sec``
28 - ``write_iops_sec``
29 - ``total_iops_sec``
30
31 See the `Fujitsu ETERNUS DX driver documentation
32 <https://docs.openstack.org/cinder/latest/configuration/block-storage/drivers/fujitsu-eternus-dx-driver.html>`_
33 for details.