Debian Codegraph @

translations/manual/tr/server.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # Bora Atıcı, 2023
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: calibre\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2026-02-17 16:44+0000\n"
12 "PO-Revision-Date: 2014-06-17 08:36+0000\n"
13 "Last-Translator: Bora Atıcı, 2023\n"
14 "Language-Team: Turkish (http://app.transifex.com/calibre/calibre/language/tr/)\n"
15 "MIME-Version: 1.0\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Language: tr\n"
19 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
20
21 #: ../../../__w/calibre/calibre/manual/server.rst:2
22 msgid "The calibre Content server"
23 msgstr "Calibre İçerik sunucusu"
24
25 #: ../../../__w/calibre/calibre/manual/server.rst:4
26 msgid ""
27 "The calibre :guilabel:`Content server` allows you to access your calibre "
28 "libraries and read books directly in a browser on your favorite mobile phone"
29 " or tablet device. As a result, you do not need to install any dedicated "
30 "book reading/management apps on your phone. Just use the browser. The server"
31 " downloads and stores the book you are reading in an off-line cache so that "
32 "you can read it even when there is no internet connection."
33 msgstr "calibre :guilabel:`İçerik sunucusu` calibre kitaplıklarınıza erişmenizi ve kitapları doğrudan favori cep telefonunuz veya tablet bilgisayarınızdaki bir tarayıcıdan okumanızı sağlar. Sonuç olarak, telefonunuza herhangi bir özel kitap okuma/yönetim uygulaması yüklemenize gerek yoktur. Sadece tarayıcıyı kullanın. Sunucu, okuduğunuz kitabı çevrimdışı bir önbellekte indirir ve saklar, böylece internet bağlantısı olmadığında bile okuyabilirsiniz."
34
35 #: ../../../__w/calibre/calibre/manual/server.rst:13
36 msgid "Contents"
37 msgstr "İçindekiler"
38
39 #: ../../../__w/calibre/calibre/manual/server.rst:15
40 msgid ""
41 "To start the server, click the :guilabel:`Connect/share` button and choose "
42 ":guilabel:`Start Content server`. You might get a message from your "
43 "computer's firewall or anti-virus program asking if it is OK to allow access"
44 " to ``calibre.exe``. Click the ``Allow`` or ``OK`` button. Then open a "
45 "browser (preferably Chrome or Firefox) in your computer and type in the "
46 "following address:"
47 msgstr "Sunucuyu başlatmak için :guilabel:`Bağlan/paylaş` düğmesine tıklayın ve :guilabel:`İçerik sunucusunu başlat`ı seçin. Bilgisayarınızın güvenlik duvarından veya anti-virüs programından \"calibre.exe\"ye erişime izin vermenin uygun olup olmadığını soran bir mesaj alabilirsiniz. ``İzin Ver`` veya ``Tamam`` düğmesini tıklayın. Daha sonra bilgisayarınızda bir tarayıcı (tercihen Chrome veya Firefox) açın ve aşağıdaki adresi yazın:"
48
49 #: ../../../__w/calibre/calibre/manual/server.rst:22
50 msgid "http://127.0.0.1:8080"
51 msgstr "http://127.0.0.1:8080"
52
53 #: ../../../__w/calibre/calibre/manual/server.rst:24
54 msgid ""
55 "This will open a page in the browser showing you your calibre libraries, "
56 "click on any one and browse the books in it. Click on a book, and it will "
57 "show you all the metadata about the book, along with buttons to "
58 ":guilabel:`Read` and :guilabel:`Download` the book. Click the "
59 ":guilabel:`Read` button to start reading the book."
60 msgstr ""
61
62 #: ../../../__w/calibre/calibre/manual/server.rst:30
63 msgid ""
64 "The address used above ``http://127.0.0.1:8080`` will only work on the "
65 "computer that is running calibre. To access the server from other "
66 "computers/phones/tablets/etc. you will need to do a little more work, as "
67 "described in the next section."
68 msgstr "Yukarıda kullanılan adres ``http://127.0.0.1:8080`` yalnızca calibre'yi çalıştıran bilgisayarda çalışacaktır. Sunucuya diğer bilgisayarlardan/telefonlardan/tabletlerden vb. erişmek için. Bir sonraki bölümde açıklandığı gibi biraz daha çalışmanız gerekecek."
69
70 #: ../../../__w/calibre/calibre/manual/server.rst:37
71 msgid "Accessing the Content server from other devices"
72 msgstr "İçerik sunucusuna diğer cihazlardan erişme"
73
74 #: ../../../__w/calibre/calibre/manual/server.rst:39
75 msgid ""
76 "There are two types of remote device access that you will typically need. "
77 "The first, simpler kind is from within your home network. If you are running"
78 " calibre on a computer on your home network and you have also connected your"
79 " other devices to the same home network, then you should be easily able to "
80 "access the server on those devices."
81 msgstr "Genellikle ihtiyaç duyacağınız iki tür uzaktan cihaz erişimi vardır. İlk, daha basit tür, ev ağınızın içindendir. Calibre'yi ev ağınızdaki bir bilgisayarda çalıştırıyorsanız ve diğer cihazlarınızı da aynı ev ağına bağladıysanız, bu cihazlardaki sunucuya kolayca erişebilmeniz gerekir."
82
83 #: ../../../__w/calibre/calibre/manual/server.rst:46
84 msgid "Accessing the server from devices on your home network"
85 msgstr "Sunucuya ev ağınızdaki cihazlardan erişme"
86
87 #: ../../../__w/calibre/calibre/manual/server.rst:48
88 msgid ""
89 "After starting the server in calibre as described above, click the "
90 ":guilabel:`Connect/share` button again. Instead of the :guilabel:`Start "
91 "Content server` action, you should see a :guilabel:`Stop Content server` "
92 "action instead. To the right of this action will be listed an IP address and"
93 " port number. These look like a bunch of numbers separated by periods. For "
94 "example::"
95 msgstr "Sunucuyu yukarıda açıklandığı gibi calibre'de başlattıktan sonra :guilabel:`Bağlan/paylaş` düğmesine tekrar tıklayın. :guilabel:`İçerik sunucusunu Başlat` eylemi yerine, :guilabel:`İçerik sunucusunu Durdur` eylemini görmelisiniz. Bu eylemin sağında bir IP adresi ve port numarası listelenecektir. Bunlar noktalarla ayrılmış bir grup sayıya benziyor. Örneğin::"
96
97 #: ../../../__w/calibre/calibre/manual/server.rst:57
98 msgid ""
99 "These numbers tell you what address to use to connect to the server in your "
100 "devices. Following the example above, the address becomes::"
101 msgstr "Bu numaralar, cihazlarınızdaki sunucuya bağlanmak için hangi adresi kullanmanız gerektiğini size söyler. Yukarıdaki örneği takip edersek adres şu şekilde olur::"
102
103 #: ../../../__w/calibre/calibre/manual/server.rst:62
104 msgid ""
105 "The first part of the address is always ``http://`` the next part is the IP "
106 "address, which is the numbers before the comma and finally we have the port "
107 "number which must be added to the IP address with a colon (``:``). If you "
108 "are lucky, that should be all you need and you will be looking at the "
109 "calibre libraries on your device. If not, read on."
110 msgstr "Adresin ilk kısmı her zaman ``http://`` olur, sonraki kısım IP adresidir, yani virgülden önceki sayılardır ve son olarak IP adresine iki nokta üst üste () eklenmesi gereken port numarasını alırız. ``:``). Şanslıysanız ihtiyacınız olan tek şey bu olmalı ve cihazınızdaki calibre kitaplıklarına bakıyor olacaksınız. Değilse, okumaya devam edin."
111
112 #: ../../../__w/calibre/calibre/manual/server.rst:70
113 msgid "Trouble-shooting the home network connection"
114 msgstr "Ev ağı bağlantısında sorun giderme"
115
116 #: ../../../__w/calibre/calibre/manual/server.rst:72
117 msgid ""
118 "If you are unable to access the server from your device, try the following "
119 "steps:"
120 msgstr "Cihazınızdan sunucuya erişemiyorsanız aşağıdaki adımları deneyin:"
121
122 #: ../../../__w/calibre/calibre/manual/server.rst:75
123 msgid ""
124 "Check that the server is running by opening the address "
125 "``http://127.0.0.1:8080`` in a browser running on the same computer as the "
126 "server."
127 msgstr "Sunucuyla aynı bilgisayarda çalışan bir tarayıcıda ``http://127.0.0.1:8080`` adresini açarak sunucunun çalışıp çalışmadığını kontrol edin."
128
129 #: ../../../__w/calibre/calibre/manual/server.rst:79
130 msgid ""
131 "Check that your firewall/anti-virus is allowing connections to your computer"
132 " on the port ``8080`` and to the calibre program. The easiest way to "
133 "eliminate the firewall/anti-virus as the source of problems is to "
134 "temporarily turn them both off and then try connecting. You should first "
135 "disconnect from the internet, before turning off the firewall, to keep your "
136 "computer safe."
137 msgstr "Güvenlik duvarınızın/anti-virüsünüzün bilgisayarınıza ``8080`` bağlantı noktasından ve calibre programına bağlantılara izin verdiğini kontrol edin. Sorunların kaynağı olan güvenlik duvarını/antivirüsü ortadan kaldırmanın en kolay yolu, her ikisini de geçici olarak kapatmak ve ardından bağlanmayı denemektir. Bilgisayarınızı güvende tutmak için güvenlik duvarını kapatmadan önce öncelikle internet bağlantısını kesmelisiniz."
138
139 #: ../../../__w/calibre/calibre/manual/server.rst:86
140 msgid ""
141 "Check that your device and computer are on the same network. This means they"
142 " should both be connected to the same wireless router. In particular neither"
143 " should be using a cellular or ISP provided direct-WiFi connection."
144 msgstr "Cihazınızın ve bilgisayarınızın aynı ağda olup olmadığını kontrol edin. Bu, her ikisinin de aynı kablosuz yönlendiriciye bağlı olması gerektiği anlamına gelir. Özellikle hücresel veya İSS tarafından sağlanan doğrudan WiFi bağlantısı kullanılmamalıdır."
145
146 #: ../../../__w/calibre/calibre/manual/server.rst:90
147 msgid ""
148 "If you have non-standard networking setup, it might be that the IP address "
149 "shown on the :guilabel:`Connect/share` menu is incorrect. In such a case you"
150 " will have to figure out what the correct IP address to use is, yourself. "
151 "Unfortunately, given the infinite diversity of network configurations "
152 "possible, it is not possible to give you a roadmap for doing so."
153 msgstr "Standart dışı ağ kurulumunuz varsa, :guilabel:`Bağlan/paylaş` menüsünde gösterilen IP adresi yanlış olabilir. Böyle bir durumda kullanacağınız doğru IP adresinin ne olduğunu kendiniz bulmanız gerekecektir. Ne yazık ki, mümkün olan ağ yapılandırmalarının sonsuz çeşitliliği göz önüne alındığında, bunu yapmak için size bir yol haritası vermek mümkün değildir."
154
155 #: ../../../__w/calibre/calibre/manual/server.rst:97
156 msgid ""
157 "If you have set up a username and password, first try it without that to see"
158 " if it is causing issues. Some e-ink devices have browsers that do not "
159 "handle authentication. You can sometimes workaround this by including the "
160 "username and password in the URL, for example: "
161 "``http://username:[email protected]:8080``."
162 msgstr ""
163
164 #: ../../../__w/calibre/calibre/manual/server.rst:103
165 msgid ""
166 "If you are stuck, you can always ask for help in the `calibre user forums`_."
167 msgstr "Eğer takılırsanız, her zaman calibre kullanıcı forumlarından_ yardım isteyebilirsiniz."
168
169 #: ../../../__w/calibre/calibre/manual/server.rst:107
170 msgid "Accessing the server from anywhere on the internet"
171 msgstr "İnternetin olduğu her yerden sunucuya erişim"
172
173 #: ../../../__w/calibre/calibre/manual/server.rst:111
174 msgid ""
175 "Before doing this you should turn on username/password protection in the "
176 "server, otherwise anyone in the world will be able to access your books. Go "
177 "to :guilabel:`Preferences->Sharing->Sharing over the net` and enable the "
178 "option to :guilabel:`Require username and password to access the content "
179 "server`."
180 msgstr "Bunu yapmadan önce sunucuda kullanıcı adı/şifre korumasını açmalısınız, aksi takdirde dünyadaki herkes kitaplarınıza erişebilir. :guilabel:`Tercihler->Paylaşım->Ağ üzerinden paylaşım` seçeneğine gidin ve :guilabel:`İçerik sunucusuna erişmek için kullanıcı adı ve şifre iste` seçeneğini etkinleştirin."
181
182 #: ../../../__w/calibre/calibre/manual/server.rst:117
183 msgid ""
184 "While the particular details on setting up internet access vary depending on"
185 " the network configuration and type of computer you are using, the basic "
186 "schema is as follows."
187 msgstr "İnternet erişimini ayarlamaya ilişkin belirli ayrıntılar, ağ yapılandırmasına ve kullandığınız bilgisayar türüne göre değişiklik gösterse de temel şema aşağıdaki gibidir."
188
189 #: ../../../__w/calibre/calibre/manual/server.rst:121
190 msgid ""
191 "Find out the external IP address of the computer you are going to run the "
192 "server on. You can do that by visiting the site `What is my IP address "
193 "<https://www.whatismyip.com/>`_ in a browser running on the computer."
194 msgstr "Sunucuyu çalıştıracağınız bilgisayarın harici IP adresini öğrenin. Bunu, bilgisayarda çalışan bir tarayıcıda `IP adresim nedir <https://www.whatismyip.com/>`_ sitesini ziyaret ederek yapabilirsiniz."
195
196 #: ../../../__w/calibre/calibre/manual/server.rst:125
197 msgid ""
198 "If the computer is behind a router, enable port forwarding on the router to "
199 "forward the port ``8080`` (or whatever port you choose to run the calibre "
200 "Content server on) to the computer."
201 msgstr "Bilgisayar bir yönlendiricinin arkasındaysa, ``8080`` bağlantı noktasını (veya calibre İçerik sunucusunu çalıştırmak için seçtiğiniz herhangi bir bağlantı noktasını) bilgisayara iletmek için yönlendiricide bağlantı noktası iletmeyi etkinleştirin."
202
203 #: ../../../__w/calibre/calibre/manual/server.rst:129
204 msgid ""
205 "Make sure the calibre server is allowed through any firewalls/anti-virus "
206 "programs on your computer."
207 msgstr "Calibre sunucusuna bilgisayarınızdaki herhangi bir güvenlik duvarı/anti-virüs programı üzerinden izin verildiğinden emin olun."
208
209 #: ../../../__w/calibre/calibre/manual/server.rst:132
210 msgid ""
211 "Now you should be able to access the server on any internet-connected device"
212 " using the IP address you found in the first step. For example, if the IP "
213 "address you found was ``123.123.123.123`` and the port you are using for the"
214 " calibre server is ``8080``, the address to use on your device becomes: "
215 "``http://123.123.123.123:8080``."
216 msgstr "Artık, ilk adımda bulduğunuz IP adresini kullanarak internete bağlı herhangi bir cihazdaki sunucuya erişebilmelisiniz. Örneğin, bulduğunuz IP adresi \"123.123.123.123\" ise ve calibre sunucusu için kullandığınız bağlantı noktası \"8080\" ise, cihazınızda kullanılacak adres şu şekilde olur: \"http://123.123\" .123.123:8080``."
217
218 #: ../../../__w/calibre/calibre/manual/server.rst:138
219 msgid ""
220 "Optionally, use a service like `no-ip <https://www.noip.com/free>`_ to setup"
221 " an easy to remember address to use instead of the IP address you found in "
222 "the first step."
223 msgstr "İsteğe bağlı olarak, ilk adımda bulduğunuz IP adresi yerine hatırlanması kolay bir adres ayarlamak için \"no-ip <https://www.noip.com/free>\"_ gibi bir hizmet kullanın."
224
225 #: ../../../__w/calibre/calibre/manual/server.rst:143
226 msgid ""
227 "For maximum security, you should also enable HTTPS on the Content server. "
228 "You can either do so directly in the server by providing the path to the "
229 "HTTPS certificate to use in the advanced configuration options for the "
230 "server, or you can set up a reverse proxy as described below, to use an "
231 "existing HTTPS setup."
232 msgstr ""
233
234 #: ../../../__w/calibre/calibre/manual/server.rst:151
235 msgid "The server interface"
236 msgstr "Sunucu arayüzü"
237
238 #: ../../../__w/calibre/calibre/manual/server.rst:153
239 msgid ""
240 "The server interface is a simplified version of the main calibre interface, "
241 "optimised for use with touch screens. The home screen shows you books you "
242 "are currently reading as well as allowing you to choose a calibre library "
243 "you want to browse. The server in calibre gives you access to all your "
244 "libraries, not just a single one, as before."
245 msgstr ""
246
247 #: ../../../__w/calibre/calibre/manual/server.rst:160
248 msgid "The book list"
249 msgstr "Kitap listesi"
250
251 #: ../../../__w/calibre/calibre/manual/server.rst:162
252 msgid ""
253 "The server book list is a simple grid of covers. Tap on a cover to see the "
254 "detailed metadata for a book, or to read the book. If you prefer a more "
255 "detailed list, you can change the default view by clicking the three "
256 "vertical dots in the top right corner."
257 msgstr ""
258
259 #: ../../../__w/calibre/calibre/manual/server.rst:167
260 msgid ""
261 "Sorting and searching of the book list should be familiar to calibre users. "
262 "They can be accessed by clicking their icons in the top right area. They "
263 "both work exactly the same as in the main calibre program. The search page "
264 "even allows you to construct search queries by clicking on "
265 "authors/tags/etc., just as you can using the Tag browser in the main "
266 "program."
267 msgstr ""
268
269 #: ../../../__w/calibre/calibre/manual/server.rst:173
270 msgid ""
271 "A much loved feature of the main program, :guilabel:`Virtual libraries` is "
272 "present in the server interface as well. Click the three vertical dots in "
273 "the top right corner to choose a Virtual library."
274 msgstr ""
275
276 #: ../../../__w/calibre/calibre/manual/server.rst:178
277 msgid "The book viewer"
278 msgstr ""
279
280 #: ../../../__w/calibre/calibre/manual/server.rst:180
281 msgid ""
282 "You can read any book in your calibre library by simply tapping on it and "
283 "then tapping the :guilabel:`Read` button. The book viewer is very simple to "
284 "operate. You can both tap and swipe to turn pages. Swiping up/down skips "
285 "between chapters. Tapping the top quarter of the screen gets you the "
286 "detailed controls and viewer preferences."
287 msgstr ""
288
289 #: ../../../__w/calibre/calibre/manual/server.rst:186
290 msgid ""
291 "If you leave the Content server running, you can even open the same book on "
292 "multiple devices and it will remember your last read position. If it does "
293 "not you can force a sync by tapping in the top quarter and choosing "
294 ":guilabel:`Sync`."
295 msgstr "İçerik sunucusunu çalışır durumda bırakırsanız, aynı kitabı birden fazla cihazda bile açabilirsiniz; bu, son okuma konumunuzu hatırlayacaktır. Aksi takdirde, üst çeyreğe dokunup :guilabel:`Sync` seçeneğini seçerek senkronizasyonu zorlayabilirsiniz."
296
297 #: ../../../__w/calibre/calibre/manual/server.rst:192
298 msgid "Browser support"
299 msgstr "Tarayıcı desteği"
300
301 #: ../../../__w/calibre/calibre/manual/server.rst:194
302 msgid ""
303 "The new calibre server makes lots of use of advanced HTML 5 and CSS 3 "
304 "features. As such it requires an up-to-date browser to use. It has been "
305 "tested on Android Chrome and iOS Safari as well as Chrome and Firefox on the"
306 " desktop."
307 msgstr "Yeni calibre sunucusu gelişmiş HTML 5 ve CSS 3 özelliklerinin çoğunu kullanıyor. Bu nedenle kullanmak için güncel bir tarayıcı gerektirir. Masaüstünde Android Chrome ve iOS Safari'nin yanı sıra Chrome ve Firefox'ta da test edilmiştir."
308
309 #: ../../../__w/calibre/calibre/manual/server.rst:198
310 msgid ""
311 "The server is careful to use functionality that has either been already "
312 "standardised or is on the standards track. As such if it does not currently "
313 "work with your favorite browser, it probably will once that browser has "
314 "caught up."
315 msgstr "Sunucu, halihazırda standartlaştırılmış veya standartlar yolunda olan işlevleri kullanmaya özen göstermektedir. Bu nedenle, şu anda favori tarayıcınızla çalışmıyorsa, muhtemelen o tarayıcı yetiştiğinde çalışacaktır."
316
317 #: ../../../__w/calibre/calibre/manual/server.rst:203
318 msgid ""
319 "If you are using a particularly old or limited browser or you don't like to "
320 "run JavaScript, you can use the *mobile* view, by simply adding ``/mobile`` "
321 "to the server address."
322 msgstr "Özellikle eski veya sınırlı bir tarayıcı kullanıyorsanız veya JavaScript çalıştırmayı sevmiyorsanız, sunucu adresine ``/mobile`` ekleyerek *mobil* görünümünü kullanabilirsiniz."
323
324 #: ../../../__w/calibre/calibre/manual/server.rst:208
325 msgid ""
326 "On iOS, Apple allows only a single browser engine, so Firefox, Chrome and "
327 "Safari are all actually the same browser under the hood. The new server "
328 "interface requires iOS 10.3.2 or newer. On Android, the server has been "
329 "tested with Chrome version 58 and newer."
330 msgstr "iOS'ta Apple yalnızca tek bir tarayıcı motoruna izin verir, dolayısıyla Firefox, Chrome ve Safari'nin hepsi aslında aynı tarayıcıdır. Yeni sunucu arayüzü iOS 10.3.2 veya daha yenisini gerektirir. Android'de sunucu, Chrome sürüm 58 ve daha yenisiyle test edilmiştir."
331
332 #: ../../../__w/calibre/calibre/manual/server.rst:214
333 msgid "Enabling offline support"
334 msgstr "Çevrimdışı desteği etkinleştirme"
335
336 #: ../../../__w/calibre/calibre/manual/server.rst:216
337 msgid ""
338 "Browser makers have been trying to force people to use SSL by disabling "
339 "advanced features in their browsers for plain HTTP connections. One such "
340 "casualty is ApplicationCache, which was what was used in calibre for offline"
341 " support. As a result nowadays sadly, offline mode works only as long as you"
342 " keep the browser tab open. In addition, in Firefox on Android, you will "
343 "need to type ``about:config`` and create a preference called "
344 "``browser.tabs.useCache`` and set it to ``true``."
345 msgstr ""
346
347 #: ../../../__w/calibre/calibre/manual/server.rst:225
348 msgid "Managing user accounts from the command-line only"
349 msgstr ""
350
351 #: ../../../__w/calibre/calibre/manual/server.rst:227
352 msgid ""
353 "The calibre program has a nice section in :guilabel:`Preferences` to allow "
354 "you to manage user accounts for the server. However, if you want to run the "
355 "standalone server and cannot run the main calibre program on the same "
356 "computer/user account, you can also manage users using just the command-"
357 "line."
358 msgstr ""
359
360 #: ../../../__w/calibre/calibre/manual/server.rst:232
361 msgid ""
362 "You can manage user accounts using the ``--manage-users`` option to the "
363 "standalone ``calibre-server`` program. Suppose you want to store the user "
364 "database in the folder ``/srv/calibre``, then you create it by running::"
365 msgstr ""
366
367 #: ../../../__w/calibre/calibre/manual/server.rst:239
368 msgid ""
369 "Just follow the prompts to create user accounts, set their permissions, etc."
370 " Once you are done, you can run the server as::"
371 msgstr ""
372
373 #: ../../../__w/calibre/calibre/manual/server.rst:244
374 msgid "It will use the user accounts you created in the previous step."
375 msgstr ""
376
377 #: ../../../__w/calibre/calibre/manual/server.rst:248
378 msgid "Integrating the calibre Content server into other servers"
379 msgstr ""
380
381 #: ../../../__w/calibre/calibre/manual/server.rst:250
382 msgid ""
383 "Here, we will show you how to integrate the calibre Content server into "
384 "another server. The most common reason for this is to make use of SSL or to "
385 "serve the calibre library as part of a larger site. The basic technique is "
386 "to run the calibre server and set up a reverse proxy to it from the main "
387 "server."
388 msgstr ""
389
390 #: ../../../__w/calibre/calibre/manual/server.rst:255
391 msgid ""
392 "A reverse proxy is when your normal server accepts incoming requests and "
393 "passes them onto the calibre server. It then reads the response from the "
394 "calibre server and forwards it to the client. This means that you can simply"
395 " run the calibre server as normal without trying to integrate it closely "
396 "with your main server."
397 msgstr ""
398
399 #: ../../../__w/calibre/calibre/manual/server.rst:262
400 msgid "Using a full virtual host"
401 msgstr ""
402
403 #: ../../../__w/calibre/calibre/manual/server.rst:264
404 msgid ""
405 "The simplest configuration is to dedicate a full virtual host to the calibre"
406 " server. In this case, run the calibre server as::"
407 msgstr ""
408
409 #: ../../../__w/calibre/calibre/manual/server.rst:269
410 msgid ""
411 "Now setup the virtual host in your main server, for example, for nginx::"
412 msgstr ""
413
414 #: ../../../__w/calibre/calibre/manual/server.rst:284
415 msgid "Or, for Apache::"
416 msgstr ""
417
418 #: ../../../__w/calibre/calibre/manual/server.rst:299
419 msgid "Using a URL prefix"
420 msgstr ""
421
422 #: ../../../__w/calibre/calibre/manual/server.rst:301
423 msgid ""
424 "If you do not want to dedicate a full virtual host to calibre, you can have "
425 "it use a URL prefix. Start the calibre server as::"
426 msgstr ""
427
428 #: ../../../__w/calibre/calibre/manual/server.rst:306
429 msgid ""
430 "The key parameter here is ``--url-prefix /calibre``. This causes the Content"
431 " server to serve all URLs prefixed by ``/calibre``. To see this in action, "
432 "visit ``http://localhost:8080/calibre`` in your browser. You should see the "
433 "normal Content server website, but now it will run under ``/calibre``."
434 msgstr ""
435
436 #: ../../../__w/calibre/calibre/manual/server.rst:308
437 msgid "With nginx, the required configuration is::"
438 msgstr ""
439
440 #: ../../../__w/calibre/calibre/manual/server.rst:325
441 msgid ""
442 "For Apache, first enable the proxy modules in Apache, by adding the "
443 "following to :file:`httpd.conf`::"
444 msgstr ""
445
446 #: ../../../__w/calibre/calibre/manual/server.rst:330
447 msgid ""
448 "The exact technique for enabling the proxy modules will vary depending on "
449 "your Apache installation. Once you have the proxy modules enabled, add the "
450 "following rules to :file:`httpd.conf` (or if you are using virtual hosts to "
451 "the conf file for the virtual host in question)::"
452 msgstr ""
453
454 #: ../../../__w/calibre/calibre/manual/server.rst:337
455 msgid ""
456 "That's all, you will now be able to access the calibre Content server under "
457 "the ``/calibre`` URL in your main server. The above rules pass all requests "
458 "under ``/calibre`` to the calibre server running on port 8080 and thanks to "
459 "the ``--url-prefix`` option above, the calibre server handles them "
460 "transparently."
461 msgstr ""
462
463 #: ../../../__w/calibre/calibre/manual/server.rst:342
464 msgid ""
465 "When using a reverse proxy, you should tell the calibre Content server to "
466 "only listen on localhost, by using ``--listen-on 127.0.0.1``. That way, the "
467 "server will only listen for connections coming from the same computer, i.e. "
468 "from the reverse proxy."
469 msgstr ""
470
471 #: ../../../__w/calibre/calibre/manual/server.rst:349
472 msgid ""
473 "If you have set up SSL for your main server, you should tell the calibre "
474 "server to use basic authentication instead of digest authentication, as it "
475 "is faster. To do so, pass the ``--auth-mode=basic`` option to ``calibre-"
476 "server``."
477 msgstr ""
478
479 #: ../../../__w/calibre/calibre/manual/server.rst:358
480 msgid "Creating a service for the calibre server on a modern Linux system"
481 msgstr ""
482
483 #: ../../../__w/calibre/calibre/manual/server.rst:360
484 msgid ""
485 "You can easily create a service to run calibre at boot on a modern (`systemd"
486 " <https://www.freedesktop.org/wiki/Software/systemd/>`_) based Linux system."
487 " Just create the file ``/etc/systemd/system/calibre-server.service`` with "
488 "the contents shown below::"
489 msgstr ""
490
491 #: ../../../__w/calibre/calibre/manual/server.rst:379
492 msgid ""
493 "Change ``mylinuxuser`` and ``mylinuxgroup`` to whatever user and group you "
494 "want the server to run as. This should be the same user and group that own "
495 "the files in the calibre library folder. Note that it is generally not a "
496 "good idea to run the server as root. Also change the path to the calibre "
497 "library folder to suit your system. You can add multiple libraries if "
498 "needed. See the help for the ``calibre-server`` command."
499 msgstr ""
500
501 #: ../../../__w/calibre/calibre/manual/server.rst:386
502 msgid "Now run::"
503 msgstr ""
504
505 #: ../../../__w/calibre/calibre/manual/server.rst:390
506 msgid "to start the server. Check its status with::"
507 msgstr ""
508
509 #: ../../../__w/calibre/calibre/manual/server.rst:394
510 msgid "To make it start at boot, run::"
511 msgstr ""
512
513 #: ../../../__w/calibre/calibre/manual/server.rst:400
514 msgid ""
515 "The calibre server *does not* need a running X server, but it does need the "
516 "X libraries installed as some components it uses link against them."
517 msgstr ""
518
519 #: ../../../__w/calibre/calibre/manual/server.rst:405
520 msgid ""
521 "The calibre server also supports systemd socket activation, so you can use "
522 "that, if needed, as well."
523 msgstr ""