Debian Codegraph @

translations/manual/tr/develop.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # Çağla Turhan, 2016
7 # Çağla Turhan, 2016
8 msgid ""
9 msgstr ""
10 "Project-Id-Version: calibre\n"
11 "Report-Msgid-Bugs-To: \n"
12 "POT-Creation-Date: 2022-10-12 10:34+0000\n"
13 "PO-Revision-Date: 2014-06-17 08:34+0000\n"
14 "Last-Translator: Çağla Turhan, 2016\n"
15 "Language-Team: Turkish (http://www.transifex.com/calibre/calibre/language/tr/)\n"
16 "MIME-Version: 1.0\n"
17 "Content-Type: text/plain; charset=UTF-8\n"
18 "Content-Transfer-Encoding: 8bit\n"
19 "Language: tr\n"
20 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
21
22 #: ../../__w/calibre/calibre/manual/develop.rst:4
23 msgid "Setting up a calibre development environment"
24 msgstr "Calibre geliştirme ortamı ayarlamak"
25
26 #: ../../__w/calibre/calibre/manual/develop.rst:6
27 msgid ""
28 "calibre is completely open source, licensed under the `GNU GPL v3 "
29 "<https://www.gnu.org/licenses/gpl.html>`_. This means that you are free to "
30 "download and modify the program to your heart's content. In this section, "
31 "you will learn how to get a calibre development environment set up on the "
32 "operating system of your choice. calibre is written primarily in `Python "
33 "<https://www.python.org>`_ with some C/C++ code for speed and system "
34 "interfacing. Note that calibre requires at least Python 3.8."
35 msgstr ""
36
37 #: ../../__w/calibre/calibre/manual/develop.rst:14
38 msgid "Contents"
39 msgstr "İçindekiler"
40
41 #: ../../__w/calibre/calibre/manual/develop.rst:17
42 msgid "Design philosophy"
43 msgstr "Tasarım felsefesi"
44
45 #: ../../__w/calibre/calibre/manual/develop.rst:19
46 msgid ""
47 "calibre has its roots in the Unix world, which means that its design is "
48 "highly modular. The modules interact with each other via well defined "
49 "interfaces. This makes adding new features and fixing bugs in calibre very "
50 "easy, resulting in a frenetic pace of development. Because of its roots, "
51 "calibre has a comprehensive command line interface for all its functions, "
52 "documented in :doc:`generated/en/cli-index`."
53 msgstr "calibre'nin kökleri Unix dünyasına uzanır, yani tasarımı oldukça modülerdir. Modüller birbirleriyle iyi tanımlanmış arayüzlerle iletişim kurarlar. Bu da calibre'ye yeni özellikler ekleme ve hata ayıklamayı çok kolay kılarak hızlı geliştirme temposu oluşturur. Kökleri sebebiyle, calibre'nin tüm fonksiyonları için :doc:`generated/tr/cli-index` de belgelenmiş kapsamlı bir komut satırı arayüzü vardır."
54
55 #: ../../__w/calibre/calibre/manual/develop.rst:24
56 msgid ""
57 "The modular design of calibre is expressed via ``Plugins``. There is a "
58 ":ref:`tutorial <customize>` on writing calibre plugins. For example, adding "
59 "support for a new device to calibre typically involves writing less than a "
60 "100 lines of code in the form of a device driver plugin. You can browse the "
61 "`built-in drivers "
62 "<https://github.com/kovidgoyal/calibre/tree/master/src/calibre/devices>`_. "
63 "Similarly, adding support for new conversion formats involves writing "
64 "input/output format plugins. Another example of the modular design is the "
65 ":ref:`recipe system <news>` for fetching news. For more examples of plugins "
66 "designed to add features to calibre, see the `Index of plugins "
67 "<https://www.mobileread.com/forums/showthread.php?p=1362767#post1362767>`_."
68 msgstr ""
69
70 #: ../../__w/calibre/calibre/manual/develop.rst:34
71 msgid "Code layout"
72 msgstr "Kod düzeni"
73
74 #: ../../__w/calibre/calibre/manual/develop.rst:36
75 msgid ""
76 "All the calibre Python code is in the ``calibre`` package. This package "
77 "contains the following main sub-packages"
78 msgstr ""
79
80 #: ../../__w/calibre/calibre/manual/develop.rst:38
81 msgid ""
82 "devices - All the device drivers. Just look through some of the built-in "
83 "drivers to get an idea for how they work."
84 msgstr "devices - Tüm aygıt sürücüleri. Bazı yerleşik sürücülere bakmanız nasıl çalıştıkları konusunda fikir edinmeniz için yeterli olacaktır."
85
86 #: ../../__w/calibre/calibre/manual/develop.rst:40
87 msgid ""
88 "For details, see: ``devices.interface`` which defines the interface "
89 "supported by device drivers and ``devices.usbms`` which defines a generic "
90 "driver that connects to a USBMS device. All USBMS based drivers in calibre "
91 "inherit from it."
92 msgstr "Detaylar için: aygıt sürücüleri tarafından desteklenen arayüzü tanımlayan ``devices.interface`` ve bir USBMS aygıtına bağlanan genel bir sürücü tanımlayan ``devices.usbms`` e göz atın. Calibre'deki tüm USBMS temelli sürücüler ondan türemiştir."
93
94 #: ../../__w/calibre/calibre/manual/develop.rst:43
95 msgid ""
96 "e-books - All the e-book conversion/metadata code. A good starting point is"
97 " ``calibre.ebooks.conversion.cli`` which is the module powering the "
98 ":command:`ebook-convert` command. The conversion process is controlled via "
99 "``conversion.plumber``. The format independent code is all in ``ebooks.oeb``"
100 " and the format dependent code is in ``ebooks.format_name``."
101 msgstr ""
102
103 #: ../../__w/calibre/calibre/manual/develop.rst:47
104 msgid ""
105 "Metadata reading, writing, and downloading is all in ``ebooks.metadata``"
106 msgstr "Metadata okuma, yazma ve indirme tamamen ``ebooks.metadata`` içindedir"
107
108 #: ../../__w/calibre/calibre/manual/develop.rst:48
109 msgid ""
110 "Conversion happens in a pipeline, for the structure of the pipeline, see "
111 ":ref:`conversion-introduction`. The pipeline consists of an input plugin, "
112 "various transforms and an output plugin. The code that constructs and drives"
113 " the pipeline is in :file:`plumber.py`. The pipeline works on a "
114 "representation of an e-book that is like an unzipped epub, with manifest, "
115 "spine, toc, guide, html content, etc. The class that manages this "
116 "representation is OEBBook in ``ebooks.oeb.base``. The various "
117 "transformations that are applied to the book during conversions live in "
118 ":file:`oeb/transforms/*.py`. And the input and output plugins live in "
119 ":file:`conversion/plugins/*.py`."
120 msgstr ""
121
122 #: ../../__w/calibre/calibre/manual/develop.rst:58
123 msgid ""
124 "E-book editing happens using a different container object. It is documented "
125 "in :ref:`polish_api`."
126 msgstr ""
127
128 #: ../../__w/calibre/calibre/manual/develop.rst:61
129 msgid ""
130 "db - The database back-end. See :ref:`db_api` for the interface to the "
131 "calibre library."
132 msgstr "db - Veri tabanı arka ucu. Calibre kitaplığına arayüz için :ref:`db_api` ye göz atın."
133
134 #: ../../__w/calibre/calibre/manual/develop.rst:63
135 msgid "Content server: ``srv`` is the calibre Content server."
136 msgstr ""
137
138 #: ../../__w/calibre/calibre/manual/develop.rst:65
139 msgid ""
140 "gui2 - The Graphical User Interface. GUI initialization happens in "
141 "``gui2.main`` and ``gui2.ui``. The e-book-viewer is in ``gui2.viewer``. The "
142 "e-book editor is in ``gui2.tweak_book``."
143 msgstr ""
144
145 #: ../../__w/calibre/calibre/manual/develop.rst:67
146 msgid ""
147 "If you want to locate the entry points for all the various calibre "
148 "executables, look at the ``entry_points`` structure in `linux.py "
149 "<https://github.com/kovidgoyal/calibre/blob/master/src/calibre/linux.py>`_."
150 msgstr "Çeşitli calibre çalıştırılabilirleri için giriş noktalarını bulmak isterseniz, `linux.py <https://github.com/kovidgoyal/calibre/blob/master/src/calibre/linux.py>`_ içindeki ``entry_points``e bakın."
151
152 #: ../../__w/calibre/calibre/manual/develop.rst:71
153 msgid ""
154 "If you need help understanding the code, post in the `development forum "
155 "<https://www.mobileread.com/forums/forumdisplay.php?f=240>`_ and you will "
156 "most likely get help from one of calibre's many developers."
157 msgstr ""
158
159 #: ../../__w/calibre/calibre/manual/develop.rst:75
160 msgid "Getting the code"
161 msgstr "Kodun alınması"
162
163 #: ../../__w/calibre/calibre/manual/develop.rst:77
164 msgid ""
165 "You can get the calibre source code in two ways, using a version control "
166 "system or directly downloading a :website_base:`tarball <dist/src>`."
167 msgstr ""
168
169 #: ../../__w/calibre/calibre/manual/develop.rst:80
170 msgid ""
171 "calibre uses `Git <https://www.git-scm.com/>`_, a distributed version "
172 "control system. Git is available on all the platforms calibre supports. "
173 "After installing Git, you can get the calibre source code with the command::"
174 msgstr ""
175
176 #: ../../__w/calibre/calibre/manual/develop.rst:86
177 msgid ""
178 "On Windows you will need the complete path name, that will be something like"
179 " :file:`C:\\\\Program Files\\\\Git\\\\git.exe`."
180 msgstr "Windows üstünde tam yol ismine ihtiyacınız olacaktır, şuna benzer bir şey olmalı :file:`C:\\\\Program Files\\\\Git\\\\git.exe`."
181
182 #: ../../__w/calibre/calibre/manual/develop.rst:88
183 msgid ""
184 "calibre is a very large project with a very long source control history, so "
185 "the above can take a while (10 mins to an hour depending on your internet "
186 "speed)."
187 msgstr "calibre çok geniş ve çok uzun kaynak kontrol geçmişine sahip bir projedir, yani yukarıdaki işlem bir miktar sürebilir (internet hızınıza bağlı olarak 10 dakikadan bir saate kadar)."
188
189 #: ../../__w/calibre/calibre/manual/develop.rst:91
190 msgid ""
191 "If you want to get the code faster, the source code for the latest release "
192 "is always available as an :website_base:`archive <dist/src>`."
193 msgstr ""
194
195 #: ../../__w/calibre/calibre/manual/develop.rst:94
196 msgid "To update a branch to the latest code, use the command::"
197 msgstr "Bir dalı son koda güncellemek için, şu komutu kullanın::"
198
199 #: ../../__w/calibre/calibre/manual/develop.rst:98
200 msgid ""
201 "You can also browse the code at `GitHub "
202 "<https://github.com/kovidgoyal/calibre>`_."
203 msgstr ""
204
205 #: ../../__w/calibre/calibre/manual/develop.rst:101
206 msgid "Submitting your changes to be included"
207 msgstr "Değişikliklerinizin içerilmesi için gönderilmesi"
208
209 #: ../../__w/calibre/calibre/manual/develop.rst:103
210 msgid ""
211 "If you only plan to make a few small changes, you can make your changes and "
212 "create a \"merge directive\" which you can then attach to a ticket in the "
213 "calibre `bug tracker <https://bugs.launchpad.net/calibre>`_. To do this, "
214 "make your changes, then run::"
215 msgstr "Yalnızca bir kaç küçük değişiklik yapmak istiyorsanız, değişikliklerinizi yapıp calibre `hata takibinde <https://bugs.launchpad.net/calibre>`_ bir bilete ekleyebileceğiniz bir \"merge talimatı\" oluşturun. Bu işlem için değişikliklerinizi yapıp şunu çalıştırın::"
216
217 #: ../../__w/calibre/calibre/manual/develop.rst:111
218 msgid ""
219 "This will create a :file:`my-changes` file in the current folder, simply "
220 "attach that to a ticket on the calibre `bug tracker "
221 "<https://bugs.launchpad.net/calibre>`_. Note that this will include *all* "
222 "the commits you have made. If you only want to send some commits, you have "
223 "to change ``origin/master`` above. To send only the last commit, use::"
224 msgstr ""
225
226 #: ../../__w/calibre/calibre/manual/develop.rst:119
227 msgid ""
228 "To send the last *n* commits, replace *1* with *n*, for example, for the "
229 "last 3 commits::"
230 msgstr "Son *n* gönderiyi yollamak için, *1* i *n* ile değiştirin, örneğin, son 3 gönderi için::"
231
232 #: ../../__w/calibre/calibre/manual/develop.rst:124
233 msgid "Be careful to not include merges when using ``HEAD~n``."
234 msgstr " ``HEAD~n`` kullanırken birleştirmeleri içermediğinize emin olun."
235
236 #: ../../__w/calibre/calibre/manual/develop.rst:126
237 msgid ""
238 "If you plan to do a lot of development on calibre, then the best method is "
239 "to create a `GitHub <https://github.com>`__ account. Below is a basic guide "
240 "to setting up your own fork of calibre in a way that will allow you to "
241 "submit pull requests for inclusion into the main calibre repository:"
242 msgstr ""
243
244 #: ../../__w/calibre/calibre/manual/develop.rst:131
245 msgid ""
246 "Setup git on your machine as described in this article: `Setup Git "
247 "<https://help.github.com/articles/set-up-git>`_"
248 msgstr "Makalede gösterildiği gibi makinenize git kurun: `Git Kurulumu <https://help.github.com/articles/set-up-git>`_"
249
250 #: ../../__w/calibre/calibre/manual/develop.rst:132
251 msgid ""
252 "Setup ssh keys for authentication to GitHub, as described here: `Generating "
253 "SSH keys <https://help.github.com/articles/generating-ssh-keys>`_"
254 msgstr "Şurada anlatıldığı gibi, GitHub'a kimlik doğrulama için ssh anahtarları kurun: `SSH anahtarları üretme <https://help.github.com/articles/generating-ssh-keys>`_"
255
256 #: ../../__w/calibre/calibre/manual/develop.rst:133
257 msgid ""
258 "Go to https://github.com/kovidgoyal/calibre and click the :guilabel:`Fork` "
259 "button."
260 msgstr "https://github.com/kovidgoyal/calibre adresine gidin ve :guilabel:`Fork` düğmesine tıklayın."
261
262 #: ../../__w/calibre/calibre/manual/develop.rst:134
263 msgid "In a Terminal do::"
264 msgstr "Bir Terminal açın ve::"
265
266 #: ../../__w/calibre/calibre/manual/develop.rst:139
267 msgid ""
268 "Replace <username> above with your GitHub username. That will get your fork "
269 "checked out locally."
270 msgstr ""
271
272 #: ../../__w/calibre/calibre/manual/develop.rst:140
273 msgid ""
274 "You can make changes and commit them whenever you like. When you are ready "
275 "to have your work merged, do a::"
276 msgstr "İstediğiniz gibi değişiklikler yapabilir ve istediğiniz zaman gönderebilirsiniz. Yaptığınız işler birleştirmeye hazır olduğunda::"
277
278 #: ../../__w/calibre/calibre/manual/develop.rst:144
279 msgid ""
280 "and go to ``https://github.com/<username>/calibre`` and click the "
281 ":guilabel:`Pull Request` button to generate a pull request that can be "
282 "merged."
283 msgstr "sonra da ``https://github.com/<username>/calibre`` adresine gidin ve :guilabel:`Pull Request` düğmesine tıklayıp birleştirme işlemi için bir çekme isteği üretin."
284
285 #: ../../__w/calibre/calibre/manual/develop.rst:145
286 msgid ""
287 "You can update your local copy with code from the main repo at any time by "
288 "doing::"
289 msgstr "Herhangi bir anda yerel kopyanızı ana depo ile şu şekilde güncel tutabilirsiniz::"
290
291 #: ../../__w/calibre/calibre/manual/develop.rst:150
292 msgid ""
293 "You should also keep an eye on the calibre `development forum "
294 "<https://www.mobileread.com/forums/forumdisplay.php?f=240>`_. Before making "
295 "major changes, you should discuss them in the forum or contact Kovid "
296 "directly (his email address is all over the source code)."
297 msgstr ""
298
299 #: ../../__w/calibre/calibre/manual/develop.rst:156
300 msgid "Windows development environment"
301 msgstr "Windows geliştirme ortamı"
302
303 #: ../../__w/calibre/calibre/manual/develop.rst:158
304 #: ../../__w/calibre/calibre/manual/develop.rst:192
305 #: ../../__w/calibre/calibre/manual/develop.rst:229
306 msgid ""
307 "You must also get the calibre source code separately as described above."
308 msgstr "Yukarda anlatıldığı gibi calibre kaynak kodunu almalısınız."
309
310 #: ../../__w/calibre/calibre/manual/develop.rst:160
311 msgid ""
312 "Install calibre normally, using the `Windows installer <https://calibre-"
313 "ebook.com/download_windows>`__. Then open a Command Prompt and change to the"
314 " previously checked out calibre code folder. For example::"
315 msgstr ""
316
317 #: ../../__w/calibre/calibre/manual/develop.rst:165
318 #: ../../__w/calibre/calibre/manual/develop.rst:241
319 msgid "calibre is the folder that contains the src and resources sub-folders."
320 msgstr ""
321
322 #: ../../__w/calibre/calibre/manual/develop.rst:167
323 msgid ""
324 "The next step is to set the environment variable ``CALIBRE_DEVELOP_FROM`` to"
325 " the absolute path of the src folder. So, following the example above, it "
326 "would be ``C:\\Users\\kovid\\work\\calibre\\src``. `Here is a short guide "
327 "<https://docs.python.org/using/windows.html#excursus-setting-environment-"
328 "variables>`_ to setting environment variables on Windows."
329 msgstr ""
330
331 #: ../../__w/calibre/calibre/manual/develop.rst:172
332 msgid ""
333 "Once you have set the environment variable, open a new command prompt and "
334 "check that it was correctly set by using the command::"
335 msgstr "Çevre değişkenini ayarladıktan sonra, yeni bir komut satırı açın ve şu komutu kullanarak düzgün ayarlandığını doğrulayın::"
336
337 #: ../../__w/calibre/calibre/manual/develop.rst:177
338 #: ../../__w/calibre/calibre/manual/develop.rst:257
339 msgid ""
340 "Setting this environment variable means that calibre will now load all its "
341 "Python code from the specified location."
342 msgstr "Bu çevre değişkenini ayarlamak calibre'nin belirtilen konumdan tüm Python kodunu yükleyeceği anlamına gelir."
343
344 #: ../../__w/calibre/calibre/manual/develop.rst:179
345 msgid ""
346 "That's it! You are now ready to start hacking on the calibre code. For "
347 "example, open the file :file:`src\\\\calibre\\\\__init__.py` in your "
348 "favorite editor and add the line::"
349 msgstr "Bu kadar! Şimdi calibre kodu üstünde çalışmaya başlayabilirsiniz. Örneğin favori düzenleyicinizle :file:`src\\\\calibre\\\\__init__.py` dosyasını açın ve şu satırı ekleyin::"
350
351 #: ../../__w/calibre/calibre/manual/develop.rst:184
352 #: ../../__w/calibre/calibre/manual/develop.rst:264
353 msgid ""
354 "near the top of the file. Now run the command :command:`calibredb`. The very"
355 " first line of output should be ``Hello, world!``."
356 msgstr "dosyanın üst kısmına doğru. Şimdi :command:`calibredb` komutunu çalıştırın. Çıktının ilk satırı ``Hello, world!`` olmalı."
357
358 #: ../../__w/calibre/calibre/manual/develop.rst:186
359 msgid ""
360 "You can also setup a calibre development environment inside the free "
361 "Microsoft Visual Studio, if you like, following the instructions `here "
362 "<https://www.mobileread.com/forums/showthread.php?t=251201>`_."
363 msgstr ""
364
365 #: ../../__w/calibre/calibre/manual/develop.rst:190
366 msgid "macOS development environment"
367 msgstr ""
368
369 #: ../../__w/calibre/calibre/manual/develop.rst:194
370 msgid ""
371 "Install calibre normally using the `provided .dmg <https://calibre-"
372 "ebook.com/download_osx>`__. Then open a Terminal and change to the "
373 "previously checked out calibre code folder, for example::"
374 msgstr ""
375
376 #: ../../__w/calibre/calibre/manual/develop.rst:199
377 msgid ""
378 "calibre is the folder that contains the src and resources sub-folders. The "
379 "calibre command line tools are found inside the calibre app bundle, in "
380 ":file:`/Applications/calibre.app/Contents/MacOS` you should add this folder "
381 "to your PATH environment variable, if you want to run the command line tools"
382 " easily."
383 msgstr ""
384
385 #: ../../__w/calibre/calibre/manual/develop.rst:205
386 msgid ""
387 "The next step is to create a bash script that will set the environment "
388 "variable ``CALIBRE_DEVELOP_FROM`` to the absolute path of the src folder "
389 "when running calibre in debug mode."
390 msgstr ""
391
392 #: ../../__w/calibre/calibre/manual/develop.rst:208
393 msgid "Create a plain text file::"
394 msgstr "Bir düz metin dosyası oluşturun::"
395
396 #: ../../__w/calibre/calibre/manual/develop.rst:214
397 msgid ""
398 "Save this file as :file:`/usr/local/bin/calibre-develop`, then set its "
399 "permissions so that it can be executed::"
400 msgstr ""
401
402 #: ../../__w/calibre/calibre/manual/develop.rst:218
403 msgid "Once you have done this, run::"
404 msgstr "Bu işlemden sonra şunu çalıştırın::"
405
406 #: ../../__w/calibre/calibre/manual/develop.rst:222
407 msgid ""
408 "You should see some diagnostic information in the Terminal window as calibre"
409 " starts up, and you should see an asterisk after the version number in the "
410 "GUI window, indicating that you are running from source."
411 msgstr "Calibre başlarken Uç birim penceresinde bazı tanılama bilgileri görüyor olmalısınız, ve GUI penceresinde sürüm numarasından sonra kaynaktan çalıştırdığınızı belirten bir yıldız işareti görmelisiniz."
412
413 #: ../../__w/calibre/calibre/manual/develop.rst:227
414 msgid "Linux development environment"
415 msgstr "Linux geliştirme ortamı"
416
417 #: ../../__w/calibre/calibre/manual/develop.rst:231
418 msgid ""
419 "calibre is primarily developed on Linux. You have two choices in setting up "
420 "the development environment. You can install the calibre binary as normal "
421 "and use that as a runtime environment to do your development. This approach "
422 "is similar to that used in Windows and macOS. Alternatively, you can install"
423 " calibre from source. Instructions for setting up a development environment "
424 "from source are in the INSTALL file in the source tree. Here we will address"
425 " using the binary as a runtime, which is the recommended method."
426 msgstr ""
427
428 #: ../../__w/calibre/calibre/manual/develop.rst:237
429 msgid ""
430 "Install calibre using the `binary installer <https://calibre-"
431 "ebook.com/download_linux>`_. Then open a terminal and change to the "
432 "previously checked out calibre code folder, for example::"
433 msgstr ""
434
435 #: ../../__w/calibre/calibre/manual/develop.rst:243
436 msgid ""
437 "The next step is to set the environment variable ``CALIBRE_DEVELOP_FROM`` to"
438 " the absolute path of the src folder. So, following the example above, it "
439 "would be ``/home/kovid/work/calibre/src``. How to set environment variables "
440 "depends on your Linux distribution and what shell you are using."
441 msgstr ""
442
443 #: ../../__w/calibre/calibre/manual/develop.rst:248
444 msgid ""
445 "It is recommended to use the binary installer provided from upstream. Should"
446 " you insist on using a package provided by your distribution, use the "
447 "``CALIBRE_PYTHON_PATH`` and ``CALIBRE_RESOURCES_PATH`` variables instead."
448 msgstr ""
449
450 #: ../../__w/calibre/calibre/manual/develop.rst:252
451 msgid ""
452 "Once you have set the environment variable, open a new terminal and check "
453 "that it was correctly set by using the command::"
454 msgstr "Çevre değişkenini ayarladıktan sonra, bir uç birim açın şu komutu kullanarak düzgün ayarlanıp ayarlanmadığını kontrol edin::"
455
456 #: ../../__w/calibre/calibre/manual/develop.rst:259
457 msgid ""
458 "That's it! You are now ready to start hacking on the calibre code. For "
459 "example, open the file :file:`src/calibre/__init__.py` in your favorite "
460 "editor and add the line::"
461 msgstr "Bu kadar! Şimdi calibre kodu üstünde çalışmaya başlayabilirsiniz. Örneğin favori düzenleyicinizle :file:`src/calibre/__init__.py` dosyasını açın ve şu satırı ekleyin::"
462
463 #: ../../__w/calibre/calibre/manual/develop.rst:267
464 msgid ""
465 "Having separate \"normal\" and \"development\" calibre installs on the same "
466 "computer"
467 msgstr "Aynı bilgisayarda ayrı \"normal\" ve \"geliştirme\" calibre yüklemelerini bulundurmak"
468
469 #: ../../__w/calibre/calibre/manual/develop.rst:269
470 msgid ""
471 "The calibre source tree is very stable and rarely breaks, but if you feel "
472 "the need to run from source on a separate test library and run the released "
473 "calibre version with your everyday library, you can achieve this easily "
474 "using .bat files or shell scripts to launch calibre. The example below shows"
475 " how to do this on Windows using .bat files (the instructions for other "
476 "platforms are the same, just use a shell script instead of a .bat file)"
477 msgstr "Calibre kaynak ağacı oldukça kararlıdır ve çok nadiren kırılır, ama ayrı bir test kitaplığından kaynaktan çalıştırma ve yayınlanan calibre sürümünü gündelik kitaplığınızla çalıştırma gibi bir ihtiyaç duyarsanız, .bat dosyaları veya kabuk betikleri kullanarak calibre'yi başlatabilirsiniz. Aşağıdaki örnek Windows üzerinde .bat dosyaları (diğer platformlar için de yönergeler aynıdır, .bat dosyası yerine kabuk betiği kullanmanız yeterli) ile bu işin nasıl yapılacağını gösteriyor"
478
479 #: ../../__w/calibre/calibre/manual/develop.rst:274
480 msgid "To launch the release version of calibre with your everyday library:"
481 msgstr "Günlük kitaplığınızla calibre'nin yayınlanan sürümünü başlatmak için:"
482
483 #: ../../__w/calibre/calibre/manual/develop.rst:276
484 msgid "calibre-normal.bat::"
485 msgstr "calibre-normal.bat::"
486
487 #: ../../__w/calibre/calibre/manual/develop.rst:280
488 msgid "calibre-dev.bat::"
489 msgstr "calibre-dev.bat::"
490
491 #: ../../__w/calibre/calibre/manual/develop.rst:287
492 msgid "Debugging tips"
493 msgstr "Hata ayıklama ipuçları"
494
495 #: ../../__w/calibre/calibre/manual/develop.rst:289
496 msgid ""
497 "Python is a dynamically typed language with excellent facilities for "
498 "introspection. Kovid wrote the core calibre code without once using a "
499 "debugger. There are many strategies to debug calibre code:"
500 msgstr "Python iç gözlem için mükemmel imkanları olan dinamik yazılan bir dildir. Kovid calibre çekirdek kodunu hata ayıklayıcı kullanmadan yazdı. Calibre kodunda hata ayıklama için bir çok taktik vardır:"
501
502 #: ../../__w/calibre/calibre/manual/develop.rst:294
503 msgid "Using print statements"
504 msgstr "Print ifadeleri kullanarak"
505
506 #: ../../__w/calibre/calibre/manual/develop.rst:296
507 msgid ""
508 "This is Kovid's favorite way to debug. Simply insert print statements at "
509 "points of interest and run your program in the terminal. For example, you "
510 "can start the GUI from the terminal as::"
511 msgstr "Kovid'in favori hata ayıklama yöntemi. İlgilendiğiniz noktalara print ifadeleri koyun ve programı uç birimde çalıştırın. Örneğin GUI'yi uç birimden şu şekilde başlatabilirsiniz::"
512
513 #: ../../__w/calibre/calibre/manual/develop.rst:301
514 msgid "Similarly, you can start the E-book viewer as::"
515 msgstr ""
516
517 #: ../../__w/calibre/calibre/manual/develop.rst:305
518 msgid "The e-book-editor can be started as::"
519 msgstr ""
520
521 #: ../../__w/calibre/calibre/manual/develop.rst:310
522 msgid "Using an interactive Python interpreter"
523 msgstr ""
524
525 #: ../../__w/calibre/calibre/manual/develop.rst:312
526 msgid ""
527 "You can insert the following two lines of code to start an interactive "
528 "Python session at that point::"
529 msgstr ""
530
531 #: ../../__w/calibre/calibre/manual/develop.rst:317
532 msgid ""
533 "When running from the command line, this will start an interactive Python "
534 "interpreter with access to all locally defined variables (variables in the "
535 "local scope). The interactive prompt even has :kbd:`Tab` completion for "
536 "object properties and you can use the various Python facilities for "
537 "introspection, such as :func:`dir`, :func:`type`, :func:`repr`, etc."
538 msgstr ""
539
540 #: ../../__w/calibre/calibre/manual/develop.rst:323
541 msgid "Using the Python debugger as a remote debugger"
542 msgstr ""
543
544 #: ../../__w/calibre/calibre/manual/develop.rst:325
545 msgid ""
546 "You can use the builtin Python debugger (pdb) as a remote debugger from the "
547 "command line. First, start the remote debugger at the point in the calibre "
548 "code you are interested in, like this::"
549 msgstr ""
550
551 #: ../../__w/calibre/calibre/manual/develop.rst:332
552 msgid ""
553 "Then run calibre, either as normal, or using one of the calibre-debug "
554 "commands described in the previous section. Once the above point in the code"
555 " is reached, calibre will freeze, waiting for the debugger to connect."
556 msgstr "Ardından calibre'yi normal ya da önceki kısımda açıklanan calibre hata ayıklama komutlarından birini kullanarak çalıştırın. Kodda yukardaki noktaya erişildiğinde calibre donacak ve hata ayıklayıcının bağlanmasını bekleyecektir."
557
558 #: ../../__w/calibre/calibre/manual/develop.rst:336
559 msgid ""
560 "Now open a terminal or command prompt and use the following command to start"
561 " the debugging session::"
562 msgstr "Şimdi bir uç birim açın ve hata ayıklama oturumunu başlatmak için aşağıdaki komutu kullanın::"
563
564 #: ../../__w/calibre/calibre/manual/develop.rst:341
565 msgid ""
566 "You can read about how to use the Python debugger in the `Python stdlib docs"
567 " for the pdb module <https://docs.python.org/library/pdb.html#debugger-"
568 "commands>`_."
569 msgstr ""
570
571 #: ../../__w/calibre/calibre/manual/develop.rst:345
572 msgid ""
573 "By default, the remote debugger will try to connect on port 4444. You can "
574 "change it, by passing the port parameter to both the set_trace() and the "
575 "cli() functions above, like this: ``set_trace(port=1234)`` and "
576 "``cli(port=1234)``."
577 msgstr "Varsayılan olarak, uzak hata ayıklayıcı port 4444'den bağlanmaya çalışacaktır. Yukardaki set_trace() ve cli() fonksiyonlarına port parametresini ``set_trace(port=1234)`` ve ``cli(port=1234)`` şeklinde geçirerek değiştirebilirsiniz."
578
579 #: ../../__w/calibre/calibre/manual/develop.rst:351
580 msgid ""
581 "The Python debugger cannot handle multiple threads, so you have to call "
582 "set_trace once per thread, each time with a different port number."
583 msgstr ""
584
585 #: ../../__w/calibre/calibre/manual/develop.rst:355
586 msgid "Using the debugger in your favorite Python IDE"
587 msgstr ""
588
589 #: ../../__w/calibre/calibre/manual/develop.rst:357
590 msgid ""
591 "It is possible to use the builtin debugger in your favorite Python IDE, if "
592 "it supports remote debugging. The first step is to add the calibre src "
593 "checkout to the ``PYTHONPATH`` in your IDE. In other words, the folder you "
594 "set as ``CALIBRE_DEVELOP_FROM`` above, must also be in the ``PYTHONPATH`` of"
595 " your IDE."
596 msgstr ""
597
598 #: ../../__w/calibre/calibre/manual/develop.rst:362
599 msgid ""
600 "Then place the IDE's remote debugger module into the :file:`src` sub-folder "
601 "of the calibre source code checkout. Add whatever code is needed to launch "
602 "the remote debugger to calibre at the point of interest, for example in the "
603 "main function. Then run calibre as normal. Your IDE should now be able to "
604 "connect to the remote debugger running inside calibre."
605 msgstr ""
606
607 #: ../../__w/calibre/calibre/manual/develop.rst:369
608 msgid "Executing arbitrary scripts in the calibre Python environment"
609 msgstr ""
610
611 #: ../../__w/calibre/calibre/manual/develop.rst:371
612 msgid ""
613 "The :command:`calibre-debug` command provides a couple of handy switches to "
614 "execute your own code, with access to the calibre modules::"
615 msgstr ":command:`calibre-debug` komutu calibre modüllerine erişimi olan kodunuzun çalışmasını sağlayan bir kaç pratik anahtar içerir::"
616
617 #: ../../__w/calibre/calibre/manual/develop.rst:376
618 msgid ""
619 "is great for testing a little snippet of code on the command line. It works "
620 "in the same way as the -c switch to the Python interpreter::"
621 msgstr ""
622
623 #: ../../__w/calibre/calibre/manual/develop.rst:380
624 msgid ""
625 "can be used to execute your own Python script. It works in the same way as "
626 "passing the script to the Python interpreter, except that the calibre "
627 "environment is fully initialized, so you can use all the calibre code in "
628 "your script. To use command line arguments with your script, use the form::"
629 msgstr "kendi Python betiğinizi çalıştırmak için kullanılabilir. Betiğin Python yorumlayıcısına verilmesiyle aynı şekilde çalışır, tek fark calibre ortamının tamamen başlatılmış olması, yani betiğinizde tüm calibre kodunu kullanabilecek olmanızdır. Betiğinizle komut satırı bağımsız değişkenlerini kullanmak için şu biçimi kullanın::"
630
631 #: ../../__w/calibre/calibre/manual/develop.rst:385
632 msgid ""
633 "The ``--`` causes all subsequent arguments to be passed to your script."
634 msgstr "``--`` takip eden tüm değişkenlerin betiğinize geçirilmesine sebep olur."
635
636 #: ../../__w/calibre/calibre/manual/develop.rst:389
637 msgid "Using calibre in your projects"
638 msgstr "Projelerinizde calibre kullanmak"
639
640 #: ../../__w/calibre/calibre/manual/develop.rst:391
641 msgid ""
642 "It is possible to directly use calibre functions/code in your Python "
643 "project. Two ways exist to do this:"
644 msgstr "Python projenizde calibre fonksiyonlarını/kodunu doğrudan kullanmak mümkündür. Bunu yapmanın iki yolu vardır:"
645
646 #: ../../__w/calibre/calibre/manual/develop.rst:394
647 msgid "Binary install of calibre"
648 msgstr "Calibre'nin ikilik kurulumu"
649
650 #: ../../__w/calibre/calibre/manual/develop.rst:396
651 msgid ""
652 "If you have a binary install of calibre, you can use the Python interpreter "
653 "bundled with calibre, like this::"
654 msgstr "Eğer calibre'nin ikilik kurulumuna sahipseniz, calibre ile gelen Python yorumlayıcısını şu şekilde kullanabilirsiniz::"
655
656 #: ../../__w/calibre/calibre/manual/develop.rst:401
657 msgid "Source install on Linux"
658 msgstr "Linux üstünde kaynak kurulum"
659
660 #: ../../__w/calibre/calibre/manual/develop.rst:403
661 msgid ""
662 "In addition to using the above technique, if you do a source install on "
663 "Linux, you can also directly import calibre, as follows::"
664 msgstr "Yukardaki yöntemin yanında, Linux üstünde kaynaktan kurulum yaparsanız, calibre'yi doğrudan şu şekilde içe aktarabilirsiniz::"
665
666 #: ../../__w/calibre/calibre/manual/develop.rst:411
667 msgid ""
668 "It is essential that you import the init_calibre module before any other "
669 "calibre modules/packages as it sets up the interpreter to run calibre code."
670 msgstr "Calibre kodunu çalıştırmak için yorumlayıcıyı ayarladığından, herhangi başka calibre modülünden/paketinden önce init_calibre modülünü içe aktarmanız önemlidir."
671
672 #: ../../__w/calibre/calibre/manual/develop.rst:415
673 msgid "API documentation for various parts of calibre"
674 msgstr "Calibre'nin çeşitli kısımları için API belgelendirmesi"