Debian Codegraph @

translations/manual/pt/server.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # Paulo Pereira <[email protected]>, 2016-2020,2023-2024
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: calibre\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2024-12-05 04:38+0000\n"
12 "PO-Revision-Date: 2014-06-17 08:36+0000\n"
13 "Last-Translator: Paulo Pereira <[email protected]>, 2016-2020,2023-2024\n"
14 "Language-Team: Portuguese (http://app.transifex.com/calibre/calibre/language/pt/)\n"
15 "MIME-Version: 1.0\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Language: pt\n"
19 "Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
20
21 #: ../../__w/calibre/calibre/manual/server.rst:2
22 msgid "The calibre Content server"
23 msgstr "O servidor de conteúdos Calibre"
24
25 #: ../../__w/calibre/calibre/manual/server.rst:4
26 msgid ""
27 "The calibre :guilabel:`Content server` allows you to access your calibre "
28 "libraries and read books directly in a browser on your favorite mobile phone"
29 " or tablet device. As a result, you do not need to install any dedicated "
30 "book reading/management apps on your phone. Just use the browser. The server"
31 " downloads and stores the book you are reading in an off-line cache so that "
32 "you can read it even when there is no internet connection."
33 msgstr ""
34
35 #: ../../__w/calibre/calibre/manual/server.rst:13
36 msgid "Contents"
37 msgstr "Conteúdos"
38
39 #: ../../__w/calibre/calibre/manual/server.rst:15
40 msgid ""
41 "To start the server, click the :guilabel:`Connect/share` button and choose "
42 ":guilabel:`Start Content server`. You might get a message from your "
43 "computer's firewall or anti-virus program asking if it is OK to allow access"
44 " to ``calibre.exe``. Click the ``Allow`` or ``OK`` button. Then open a "
45 "browser (preferably Chrome or Firefox) in your computer and type in the "
46 "following address:"
47 msgstr ""
48
49 #: ../../__w/calibre/calibre/manual/server.rst:22
50 msgid "http://127.0.0.1:8080"
51 msgstr "http://127.0.0.1:8080"
52
53 #: ../../__w/calibre/calibre/manual/server.rst:24
54 msgid ""
55 "This will open a page in the browser showing you your calibre libraries, "
56 "click on any one and browse the books in it. Click on a book, and it will "
57 "show you all the metadata about the book, along with buttons to "
58 ":guilabel:`Read` and :guilabel:`Download` the book. Click the "
59 ":guilabel:`Read` button to start reading the book."
60 msgstr ""
61
62 #: ../../__w/calibre/calibre/manual/server.rst:30
63 msgid ""
64 "The address used above ``http://127.0.0.1:8080`` will only work on the "
65 "computer that is running calibre. To access the server from other "
66 "computers/phones/tablets/etc. you will need to do a little more work, as "
67 "described in the next section."
68 msgstr ""
69
70 #: ../../__w/calibre/calibre/manual/server.rst:37
71 msgid "Accessing the Content server from other devices"
72 msgstr "Aceder ao servidor a partir de outros dispositivos"
73
74 #: ../../__w/calibre/calibre/manual/server.rst:39
75 msgid ""
76 "There are two types of remote device access that you will typically need. "
77 "The first, simpler kind is from within your home network. If you are running"
78 " calibre on a computer on your home network and you have also connected your"
79 " other devices to the same home network, then you should be easily able to "
80 "access the server on those devices."
81 msgstr ""
82
83 #: ../../__w/calibre/calibre/manual/server.rst:46
84 msgid "Accessing the server from devices on your home network"
85 msgstr "Aceder ao servidor a partir de dispositivos na sua rede local"
86
87 #: ../../__w/calibre/calibre/manual/server.rst:48
88 msgid ""
89 "After starting the server in calibre as described above, click the "
90 ":guilabel:`Connect/share` button again. Instead of the :guilabel:`Start "
91 "Content server` action, you should see a :guilabel:`Stop Content server` "
92 "action instead. To the right of this action will be listed an IP address and"
93 " port number. These look like a bunch of numbers separated by periods. For "
94 "example::"
95 msgstr ""
96
97 #: ../../__w/calibre/calibre/manual/server.rst:57
98 msgid ""
99 "These numbers tell you what address to use to connect to the server in your "
100 "devices. Following the example above, the address becomes::"
101 msgstr ""
102
103 #: ../../__w/calibre/calibre/manual/server.rst:62
104 msgid ""
105 "The first part of the address is always ``http://`` the next part is the IP "
106 "address, which is the numbers before the comma and finally we have the port "
107 "number which must be added to the IP address with a colon (``:``). If you "
108 "are lucky, that should be all you need and you will be looking at the "
109 "calibre libraries on your device. If not, read on."
110 msgstr ""
111
112 #: ../../__w/calibre/calibre/manual/server.rst:70
113 msgid "Trouble-shooting the home network connection"
114 msgstr ""
115
116 #: ../../__w/calibre/calibre/manual/server.rst:72
117 msgid ""
118 "If you are unable to access the server from your device, try the following "
119 "steps:"
120 msgstr ""
121
122 #: ../../__w/calibre/calibre/manual/server.rst:75
123 msgid ""
124 "Check that the server is running by opening the address "
125 "``http://127.0.0.1:8080`` in a browser running on the same computer as the "
126 "server."
127 msgstr ""
128
129 #: ../../__w/calibre/calibre/manual/server.rst:79
130 msgid ""
131 "Check that your firewall/anti-virus is allowing connections to your computer"
132 " on the port ``8080`` and to the calibre program. The easiest way to "
133 "eliminate the firewall/anti-virus as the source of problems is to "
134 "temporarily turn them both off and then try connecting. You should first "
135 "disconnect from the internet, before turning off the firewall, to keep your "
136 "computer safe."
137 msgstr ""
138
139 #: ../../__w/calibre/calibre/manual/server.rst:86
140 msgid ""
141 "Check that your device and computer are on the same network. This means they"
142 " should both be connected to the same wireless router. In particular neither"
143 " should be using a cellular or ISP provided direct-WiFi connection."
144 msgstr ""
145
146 #: ../../__w/calibre/calibre/manual/server.rst:90
147 msgid ""
148 "If you have non-standard networking setup, it might be that the IP address "
149 "shown on the :guilabel:`Connect/share` menu is incorrect. In such a case you"
150 " will have to figure out what the correct IP address to use is, yourself. "
151 "Unfortunately, given the infinite diversity of network configurations "
152 "possible, it is not possible to give you a roadmap for doing so."
153 msgstr ""
154
155 #: ../../__w/calibre/calibre/manual/server.rst:97
156 msgid ""
157 "If you have setup a username and password, first try it without that to see "
158 "if it is causing issues. Some e-ink devices have browsers that do not handle"
159 " authentication. You can sometimes workaround this by including the username"
160 " and password in the URL, for example: "
161 "``http://username:[email protected]:8080``."
162 msgstr ""
163
164 #: ../../__w/calibre/calibre/manual/server.rst:103
165 msgid ""
166 "If you are stuck, you can always ask for help in the `calibre user forums`_."
167 msgstr ""
168
169 #: ../../__w/calibre/calibre/manual/server.rst:107
170 msgid "Accessing the server from anywhere on the internet"
171 msgstr "Aceder ao servidor a partir de qualquer local na Internet"
172
173 #: ../../__w/calibre/calibre/manual/server.rst:111
174 msgid ""
175 "Before doing this you should turn on username/password protection in the "
176 "server, otherwise anyone in the world will be able to access your books. Go "
177 "to :guilabel:`Preferences->Sharing->Sharing over the net` and enable the "
178 "option to :guilabel:`Require username and password to access the content "
179 "server`."
180 msgstr ""
181
182 #: ../../__w/calibre/calibre/manual/server.rst:117
183 msgid ""
184 "While the particular details on setting up internet access vary depending on"
185 " the network configuration and type of computer you are using, the basic "
186 "schema is as follows."
187 msgstr ""
188
189 #: ../../__w/calibre/calibre/manual/server.rst:121
190 msgid ""
191 "Find out the external IP address of the computer you are going to run the "
192 "server on. You can do that by visiting the site `What is my IP address "
193 "<https://www.whatismyip.com/>`_ in a browser running on the computer."
194 msgstr ""
195
196 #: ../../__w/calibre/calibre/manual/server.rst:125
197 msgid ""
198 "If the computer is behind a router, enable port forwarding on the router to "
199 "forward the port ``8080`` (or whatever port you choose to run the calibre "
200 "Content server on) to the computer."
201 msgstr ""
202
203 #: ../../__w/calibre/calibre/manual/server.rst:129
204 msgid ""
205 "Make sure the calibre server is allowed through any firewalls/anti-virus "
206 "programs on your computer."
207 msgstr ""
208
209 #: ../../__w/calibre/calibre/manual/server.rst:132
210 msgid ""
211 "Now you should be able to access the server on any internet-connected device"
212 " using the IP address you found in the first step. For example, if the IP "
213 "address you found was ``123.123.123.123`` and the port you are using for the"
214 " calibre server is ``8080``, the address to use on your device becomes: "
215 "``http://123.123.123.123:8080``."
216 msgstr ""
217
218 #: ../../__w/calibre/calibre/manual/server.rst:138
219 msgid ""
220 "Optionally, use a service like `no-ip <https://www.noip.com/free>`_ to setup"
221 " an easy to remember address to use instead of the IP address you found in "
222 "the first step."
223 msgstr ""
224
225 #: ../../__w/calibre/calibre/manual/server.rst:143
226 msgid ""
227 "For maximum security, you should also enable HTTPS on the Content server. "
228 "You can either do so directly in the server by providing the path to the "
229 "HTTPS certificate to use in the advanced configuration options for the "
230 "server, or you can setup a reverse proxy as described below, to use an "
231 "existing HTTPS setup."
232 msgstr ""
233
234 #: ../../__w/calibre/calibre/manual/server.rst:151
235 msgid "The server interface"
236 msgstr "A interface do servidor"
237
238 #: ../../__w/calibre/calibre/manual/server.rst:153
239 msgid ""
240 "The server interface is a simplified version of the main calibre interface, "
241 "optimised for use with touch screens. The home screen shows you books you "
242 "are currently reading as well as allowing to choose a calibre library you "
243 "want to browse. The server in calibre gives you access to all your "
244 "libraries, not just a single one, as before."
245 msgstr ""
246
247 #: ../../__w/calibre/calibre/manual/server.rst:160
248 msgid "The book list"
249 msgstr "A lista de livros"
250
251 #: ../../__w/calibre/calibre/manual/server.rst:162
252 msgid ""
253 "The server book list is a simple grid of covers. Tap on a cover to see the "
254 "detailed metadata for a book, or to read the book. If you prefer a more "
255 "detailed list, you can change the default view by clicking the three "
256 "vertical dots in the top right corner."
257 msgstr ""
258
259 #: ../../__w/calibre/calibre/manual/server.rst:167
260 msgid ""
261 "Sorting and searching of the book list should be familiar to calibre users. "
262 "They can be accessed by clicking their icons in the top right area. They "
263 "both work exactly the same as in the main calibre program. The search page "
264 "even allows you to construct search queries by clicking on "
265 "authors/tags/etc., just as you can using the Tag browser in the main "
266 "program."
267 msgstr ""
268
269 #: ../../__w/calibre/calibre/manual/server.rst:173
270 msgid ""
271 "A much loved feature of the main program, :guilabel:`Virtual libraries` is "
272 "present in the server interface as well. Click the three vertical dots in "
273 "the top right corner to choose a Virtual library."
274 msgstr ""
275
276 #: ../../__w/calibre/calibre/manual/server.rst:178
277 msgid "The book viewer"
278 msgstr "O visualizador de livros digitais"
279
280 #: ../../__w/calibre/calibre/manual/server.rst:180
281 msgid ""
282 "You can read any book in your calibre library by simply tapping on it and "
283 "then tapping the :guilabel:`Read` button. The book viewer is very simple to "
284 "operate. You can both tap and swipe to turn pages. Swiping up/down skips "
285 "between chapters. Tapping the top quarter of the screen gets you the "
286 "detailed controls and viewer preferences."
287 msgstr ""
288
289 #: ../../__w/calibre/calibre/manual/server.rst:186
290 msgid ""
291 "If you leave the Content server running, you can even open the same book on "
292 "multiple devices and it will remember your last read position. If it does "
293 "not you can force a sync by tapping in the top quarter and choosing "
294 ":guilabel:`Sync`."
295 msgstr ""
296
297 #: ../../__w/calibre/calibre/manual/server.rst:192
298 msgid "Browser support"
299 msgstr ""
300
301 #: ../../__w/calibre/calibre/manual/server.rst:194
302 msgid ""
303 "The new calibre server makes lots of use of advanced HTML 5 and CSS 3 "
304 "features. As such it requires an up-to-date browser to use. It has been "
305 "tested on Android Chrome and iOS Safari as well as Chrome and Firefox on the"
306 " desktop."
307 msgstr ""
308
309 #: ../../__w/calibre/calibre/manual/server.rst:198
310 msgid ""
311 "The server is careful to use functionality that has either been already "
312 "standardised or is on the standards track. As such if it does not currently "
313 "work with your favorite browser, it probably will once that browser has "
314 "caught up."
315 msgstr ""
316
317 #: ../../__w/calibre/calibre/manual/server.rst:203
318 msgid ""
319 "If you are using a particularly old or limited browser or you don't like to "
320 "run JavaScript, you can use the *mobile* view, by simply adding ``/mobile`` "
321 "to the server address."
322 msgstr ""
323
324 #: ../../__w/calibre/calibre/manual/server.rst:208
325 msgid ""
326 "On iOS, Apple allows only a single browser engine, so Firefox, Chrome and "
327 "Safari are all actually the same browser under the hood. The new server "
328 "interface requires iOS 10.3.2 or newer. On Android, the server has been "
329 "tested with Chrome version 58 and newer."
330 msgstr ""
331
332 #: ../../__w/calibre/calibre/manual/server.rst:214
333 msgid "Enabling offline support"
334 msgstr ""
335
336 #: ../../__w/calibre/calibre/manual/server.rst:216
337 msgid ""
338 "Browser makers have been trying to force people to use SSL by disabling "
339 "advanced features in their browsers for plain HTTP connections. One such "
340 "casualty is ApplicationCache, which was what was used in calibre for offline"
341 " support. As a result now-a-days sadly, offline mode works only as long as "
342 "you keep the browser tab open. In addition, in Firefox on Android, you will "
343 "need to type ``about:config`` and create a preference called "
344 "``browser.tabs.useCache`` and set it to ``true``."
345 msgstr ""
346
347 #: ../../__w/calibre/calibre/manual/server.rst:225
348 msgid "Managing user accounts from the command-line only"
349 msgstr ""
350
351 #: ../../__w/calibre/calibre/manual/server.rst:227
352 msgid ""
353 "The calibre program has a nice section in :guilabel:`Preferences` to allow "
354 "you to manage user accounts for the server. However, if you want to run the "
355 "standalone server and cannot run the main calibre program on the same "
356 "computer/user account, you can also manage users using just the command-"
357 "line."
358 msgstr ""
359
360 #: ../../__w/calibre/calibre/manual/server.rst:232
361 msgid ""
362 "You can manage user accounts using the ``--manage-users`` option to the "
363 "standalone ``calibre-server`` program. Suppose you want to store the user "
364 "database in the folder ``/srv/calibre``, then you create it by running::"
365 msgstr ""
366
367 #: ../../__w/calibre/calibre/manual/server.rst:239
368 msgid ""
369 "Just follow the prompts to create user accounts, set their permission, etc. "
370 "Once you are done, you can run the server as::"
371 msgstr ""
372
373 #: ../../__w/calibre/calibre/manual/server.rst:244
374 msgid "It will use the user accounts you created in the previous step."
375 msgstr ""
376
377 #: ../../__w/calibre/calibre/manual/server.rst:248
378 msgid "Integrating the calibre Content server into other servers"
379 msgstr ""
380
381 #: ../../__w/calibre/calibre/manual/server.rst:250
382 msgid ""
383 "Here, we will show you how to integrate the calibre Content server into "
384 "another server. The most common reason for this is to make use of SSL or to "
385 "serve the calibre library as part of a larger site. The basic technique is "
386 "to run the calibre server and setup a reverse proxy to it from the main "
387 "server."
388 msgstr ""
389
390 #: ../../__w/calibre/calibre/manual/server.rst:255
391 msgid ""
392 "A reverse proxy is when your normal server accepts incoming requests and "
393 "passes them onto the calibre server. It then reads the response from the "
394 "calibre server and forwards it to the client. This means that you can simply"
395 " run the calibre server as normal without trying to integrate it closely "
396 "with your main server."
397 msgstr ""
398
399 #: ../../__w/calibre/calibre/manual/server.rst:262
400 msgid "Using a full virtual host"
401 msgstr ""
402
403 #: ../../__w/calibre/calibre/manual/server.rst:264
404 msgid ""
405 "The simplest configuration is to dedicate a full virtual host to the calibre"
406 " server. In this case, run the calibre server as::"
407 msgstr ""
408
409 #: ../../__w/calibre/calibre/manual/server.rst:269
410 msgid ""
411 "Now setup the virtual host in your main server, for example, for nginx::"
412 msgstr ""
413
414 #: ../../__w/calibre/calibre/manual/server.rst:284
415 msgid "Or, for Apache::"
416 msgstr ""
417
418 #: ../../__w/calibre/calibre/manual/server.rst:299
419 msgid "Using a URL prefix"
420 msgstr "Usar um prefixo de URL"
421
422 #: ../../__w/calibre/calibre/manual/server.rst:301
423 msgid ""
424 "If you do not want to dedicate a full virtual host to calibre, you can have "
425 "it use a URL prefix. Start the calibre server as::"
426 msgstr ""
427
428 #: ../../__w/calibre/calibre/manual/server.rst:306
429 msgid ""
430 "The key parameter here is ``--url-prefix /calibre``. This causes the Content"
431 " server to serve all URLs prefixed by ``/calibre``. To see this in action, "
432 "visit ``http://localhost:8080/calibre`` in your browser. You should see the "
433 "normal Content server website, but now it will run under ``/calibre``."
434 msgstr ""
435
436 #: ../../__w/calibre/calibre/manual/server.rst:308
437 msgid "With nginx, the required configuration is::"
438 msgstr ""
439
440 #: ../../__w/calibre/calibre/manual/server.rst:325
441 msgid ""
442 "For Apache, first enable the proxy modules in Apache, by adding the "
443 "following to :file:`httpd.conf`::"
444 msgstr ""
445
446 #: ../../__w/calibre/calibre/manual/server.rst:330
447 msgid ""
448 "The exact technique for enabling the proxy modules will vary depending on "
449 "your Apache installation. Once you have the proxy modules enabled, add the "
450 "following rules to :file:`httpd.conf` (or if you are using virtual hosts to "
451 "the conf file for the virtual host in question)::"
452 msgstr ""
453
454 #: ../../__w/calibre/calibre/manual/server.rst:337
455 msgid ""
456 "That's all, you will now be able to access the calibre Content server under "
457 "the ``/calibre`` URL in your main server. The above rules pass all requests "
458 "under ``/calibre`` to the calibre server running on port 8080 and thanks to "
459 "the ``--url-prefix`` option above, the calibre server handles them "
460 "transparently."
461 msgstr ""
462
463 #: ../../__w/calibre/calibre/manual/server.rst:342
464 msgid ""
465 "When using a reverse proxy, you should tell the calibre Content server to "
466 "only listen on localhost, by using ``--listen-on 127.0.0.1``. That way, the "
467 "server will only listen for connections coming from the same computer, i.e. "
468 "from the reverse proxy."
469 msgstr ""
470
471 #: ../../__w/calibre/calibre/manual/server.rst:349
472 msgid ""
473 "If you have setup SSL for your main server, you should tell the calibre "
474 "server to use basic authentication instead of digest authentication, as it "
475 "is faster. To do so, pass the ``--auth-mode=basic`` option to ``calibre-"
476 "server``."
477 msgstr ""
478
479 #: ../../__w/calibre/calibre/manual/server.rst:358
480 msgid "Creating a service for the calibre server on a modern Linux system"
481 msgstr ""
482
483 #: ../../__w/calibre/calibre/manual/server.rst:360
484 msgid ""
485 "You can easily create a service to run calibre at boot on a modern (`systemd"
486 " <https://www.freedesktop.org/wiki/Software/systemd/>`_) based Linux system."
487 " Just create the file ``/etc/systemd/system/calibre-server.service`` with "
488 "the contents shown below::"
489 msgstr ""
490
491 #: ../../__w/calibre/calibre/manual/server.rst:379
492 msgid ""
493 "Change ``mylinuxuser`` and ``mylinuxgroup`` to whatever user and group you "
494 "want the server to run as. This should be the same user and group that own "
495 "the files in the calibre library folder. Note that it is generally not a "
496 "good idea to run the server as root. Also change the path to the calibre "
497 "library folder to suit your system. You can add multiple libraries if "
498 "needed. See the help for the ``calibre-server`` command."
499 msgstr ""
500
501 #: ../../__w/calibre/calibre/manual/server.rst:386
502 msgid "Now run::"
503 msgstr ""
504
505 #: ../../__w/calibre/calibre/manual/server.rst:390
506 msgid "to start the server. Check its status with::"
507 msgstr ""
508
509 #: ../../__w/calibre/calibre/manual/server.rst:394
510 msgid "To make it start at boot, run::"
511 msgstr ""
512
513 #: ../../__w/calibre/calibre/manual/server.rst:400
514 msgid ""
515 "The calibre server *does not* need a running X server, but it does need the "
516 "X libraries installed as some components it uses link against them."
517 msgstr ""
518
519 #: ../../__w/calibre/calibre/manual/server.rst:405
520 msgid ""
521 "The calibre server also supports systemd socket activation, so you can use "
522 "that, if needed, as well."
523 msgstr ""