Debian Codegraph @

translations/manual/ms/conversion.po

raw
1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) Kovid Goyal
3 # This file is distributed under the same license as the calibre package.
4 #
5 # Translators:
6 # abuyop <[email protected]>, 2015-2017
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: calibre\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2022-02-17 05:40+0000\n"
12 "PO-Revision-Date: 2022-02-09 03:23+0000\n"
13 "Last-Translator: Kovid Goyal <[email protected]>\n"
14 "Language-Team: Malay (http://www.transifex.com/calibre/calibre/language/ms/)\n"
15 "MIME-Version: 1.0\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Language: ms\n"
19 "Plural-Forms: nplurals=1; plural=0;\n"
20
21 #: ../../__w/calibre/calibre/manual/conversion.rst:4
22 msgid "E-book conversion"
23 msgstr ""
24
25 #: ../../__w/calibre/calibre/manual/conversion.rst:6
26 msgid ""
27 "calibre has a conversion system that is designed to be very easy to use. "
28 "Normally, you just add a book to calibre, click convert and calibre will try"
29 " hard to generate output that is as close as possible to the input. However,"
30 " calibre accepts a very large number of input formats, not all of which are "
31 "as suitable as others for conversion to e-books. In the case of such input "
32 "formats, or if you just want greater control over the conversion system, "
33 "calibre has a lot of options to fine tune the conversion process. Note "
34 "however that calibre's conversion system is not a substitute for a full "
35 "blown e-book editor. To edit e-books, I recommend first converting them to "
36 "EPUB or AZW3 using calibre and then using the :guilabel:`Edit book` feature "
37 "to get them into perfect shape. You can then use the edited e-book as input "
38 "for conversion into other formats in calibre."
39 msgstr ""
40
41 #: ../../__w/calibre/calibre/manual/conversion.rst:18
42 msgid ""
43 "This document will refer mainly to the conversion settings as found in the "
44 "conversion dialog, pictured below. All these settings are also available via"
45 " command line interface to conversion, documented at "
46 ":doc:`generated/en/ebook-convert`. In calibre, you can obtain help on any "
47 "individual setting by holding your mouse over it, a tooltip will appear "
48 "describing the setting."
49 msgstr ""
50
51 #: ../../__w/calibre/calibre/manual/conversion.rstNone
52 msgid "E-book conversion dialog"
53 msgstr ""
54
55 #: ../../__w/calibre/calibre/manual/conversion.rst:31
56 #: ../../__w/calibre/calibre/manual/conversion.rst:95
57 msgid "Contents"
58 msgstr "Kandungan"
59
60 #: ../../__w/calibre/calibre/manual/conversion.rst:36
61 msgid "Introduction"
62 msgstr "Pengenalan"
63
64 #: ../../__w/calibre/calibre/manual/conversion.rst:38
65 #: ../../__w/calibre/calibre/manual/conversion.rst:38
66 msgid "Debug icon"
67 msgstr ""
68
69 #: ../../__w/calibre/calibre/manual/conversion.rst:42
70 msgid ""
71 "The first thing to understand about the conversion system is that it is "
72 "designed as a pipeline. Schematically, it looks like this:"
73 msgstr "Perkara pertama untuk memahami sistem pertukaran format ialah ia direka sebagai satu talian paip. Secara skematik, ia kelihata sebegini:"
74
75 #: ../../__w/calibre/calibre/manual/conversion.rstNone
76 msgid "The conversion pipeline"
77 msgstr ""
78
79 #: ../../__w/calibre/calibre/manual/conversion.rst:49
80 msgid ""
81 "The input format is first converted to XHTML by the appropriate *Input "
82 "plugin*. This HTML is then *transformed*. In the last step, the processed "
83 "XHTML is converted to the specified output format by the appropriate *Output"
84 " plugin*. The results of the conversion can vary greatly, based on the input"
85 " format. Some formats convert much better than others. A list of the best "
86 "source formats for conversion is available :ref:`here <best-source-"
87 "formats>`."
88 msgstr ""
89
90 #: ../../__w/calibre/calibre/manual/conversion.rst:56
91 msgid ""
92 "The transforms that act on the XHTML output are where all the work happens. "
93 "There are various transforms, for example, to insert book metadata as a page"
94 " at the start of the book, to detect chapter headings and automatically "
95 "create a Table of Contents, to proportionally adjust font sizes, et cetera. "
96 "It is important to remember that all the transforms act on the XHTML output "
97 "by the *Input plugin*, not on the input file itself. So, for example, if you"
98 " ask calibre to convert an RTF file to EPUB, it will first be converted to "
99 "XHTML internally, the various transforms will be applied to the XHTML and "
100 "then the *Output plugin* will create the EPUB file, automatically generating"
101 " all metadata, Table of Contents, et cetera."
102 msgstr ""
103
104 #: ../../__w/calibre/calibre/manual/conversion.rst:65
105 msgid ""
106 "You can see this process in action by using the debug option |dbgi|. Just "
107 "specify the path to a folder for the debug output. During conversion, "
108 "calibre will place the XHTML generated by the various stages of the "
109 "conversion pipeline in different sub-folders. The four sub-folders are:"
110 msgstr ""
111
112 #: ../../__w/calibre/calibre/manual/conversion.rst:70
113 msgid "Stages of the conversion pipeline"
114 msgstr "Tahap talian paip penukaran format"
115
116 #: ../../__w/calibre/calibre/manual/conversion.rst:73
117 msgid "Folder"
118 msgstr "Folder"
119
120 #: ../../__w/calibre/calibre/manual/conversion.rst:73
121 msgid "Description"
122 msgstr "Keterangan"
123
124 #: ../../__w/calibre/calibre/manual/conversion.rst:75
125 msgid "input"
126 msgstr "input"
127
128 #: ../../__w/calibre/calibre/manual/conversion.rst:75
129 msgid ""
130 "This contains the HTML output by the Input plugin. Use this to debug the "
131 "Input plugin."
132 msgstr ""
133
134 #: ../../__w/calibre/calibre/manual/conversion.rst:76
135 msgid "parsed"
136 msgstr "terhurai"
137
138 #: ../../__w/calibre/calibre/manual/conversion.rst:76
139 msgid ""
140 "The result of pre-processing and converting to XHTML the output from the "
141 "Input plugin. Use to debug structure detection."
142 msgstr ""
143
144 #: ../../__w/calibre/calibre/manual/conversion.rst:77
145 msgid "structure"
146 msgstr "struktur"
147
148 #: ../../__w/calibre/calibre/manual/conversion.rst:77
149 msgid ""
150 "Post structure detection, but before CSS flattening and font size "
151 "conversion. Use to debug font size conversion and CSS transforms."
152 msgstr "Pengesanan struktur pasca, tetapi sebelum meratakan CSS dan penukaran saiz fon. Digunakan untuk menyahpepijat penukaran saiz fon dan penjelmaan CSS."
153
154 #: ../../__w/calibre/calibre/manual/conversion.rst:78
155 msgid "processed"
156 msgstr "diproses"
157
158 #: ../../__w/calibre/calibre/manual/conversion.rst:78
159 msgid ""
160 "Just before the e-book is passed to the Output plugin. Use to debug the "
161 "Output plugin."
162 msgstr ""
163
164 #: ../../__w/calibre/calibre/manual/conversion.rst:81
165 msgid ""
166 "If you want to edit the input document a little before having calibre "
167 "convert it, the best thing to do is edit the files in the :file:`input` sub-"
168 "folder, then zip it up, and use the ZIP file as the input format for "
169 "subsequent conversions. To do this use the :guilabel:`Edit meta information`"
170 " dialog to add the ZIP file as a format for the book and then, in the top "
171 "left corner of the conversion dialog, select ZIP as the input format."
172 msgstr ""
173
174 #: ../../__w/calibre/calibre/manual/conversion.rst:87
175 msgid ""
176 "This document will deal mainly with the various transforms that operate on "
177 "the intermediate XHTML and how to control them. At the end are some tips "
178 "specific to each input/output format."
179 msgstr ""
180
181 #: ../../__w/calibre/calibre/manual/conversion.rst:91
182 msgid "Look & feel"
183 msgstr "Penampilan"
184
185 #: ../../__w/calibre/calibre/manual/conversion.rst:97
186 msgid ""
187 "This group of options controls various aspects of the look and feel of the "
188 "converted e-book."
189 msgstr ""
190
191 #: ../../__w/calibre/calibre/manual/conversion.rst:102
192 msgid "Fonts"
193 msgstr "Fon"
194
195 #: ../../__w/calibre/calibre/manual/conversion.rst:104
196 msgid ""
197 "One of the nicest features of the e-reading experience is the ability to "
198 "easily adjust font sizes to suit individual needs and lighting conditions. "
199 "calibre has sophisticated algorithms to ensure that all the books it outputs"
200 " have a consistent font sizes, no matter what font sizes are specified in "
201 "the input document."
202 msgstr ""
203
204 #: ../../__w/calibre/calibre/manual/conversion.rst:109
205 msgid ""
206 "The base font size of a document is the most common font size in that "
207 "document, i.e., the size of the bulk of text in that document. When you "
208 "specify a :guilabel:`Base font size`, calibre automatically rescales all "
209 "font sizes in the document proportionately, so that the most common font "
210 "size becomes the specified base font size and other font sizes are rescaled "
211 "appropriately. By choosing a larger base font size, you can make the fonts "
212 "in the document larger and vice versa. When you set the base font size, for "
213 "best results, you should also set the font size key."
214 msgstr ""
215
216 #: ../../__w/calibre/calibre/manual/conversion.rst:117
217 msgid ""
218 "Normally, calibre will automatically choose a base font size appropriate to "
219 "the output profile you have chosen (see :ref:`page-setup`). However, you can"
220 " override this here in case the default is not suitable for you."
221 msgstr ""
222
223 #: ../../__w/calibre/calibre/manual/conversion.rst:121
224 msgid ""
225 "The :guilabel:`Font size key` option lets you control how non-base font "
226 "sizes are rescaled. The font rescaling algorithm works using a font size "
227 "key, which is simply a comma-separated list of font sizes. The font size key"
228 " tells calibre how many \"steps\" bigger or smaller a given font size should"
229 " be compared to the base font size. The idea is that there should be a "
230 "limited number of font sizes in a document. For example, one size for the "
231 "body text, a couple of sizes for different levels of headings and a couple "
232 "of sizes for super/sub scripts and footnotes. The font size key allows "
233 "calibre to compartmentalize the font sizes in the input documents into "
234 "separate \"bins\" corresponding to the different logical font sizes."
235 msgstr ""
236
237 #: ../../__w/calibre/calibre/manual/conversion.rst:130
238 msgid ""
239 "Let's illustrate with an example. Suppose the source document we are "
240 "converting was produced by someone with excellent eyesight and has a base "
241 "font size of 8pt. That means the bulk of the text in the document is sized "
242 "at 8pts, while headings are somewhat larger (say 10 and 12pt) and footnotes "
243 "somewhat smaller at 6pt. Now if we use the following settings::"
244 msgstr ""
245
246 #: ../../__w/calibre/calibre/manual/conversion.rst:139
247 msgid ""
248 "The output document will have a base font size of 12pt, headings of 14 and "
249 "16pt and footnotes of 8pt. Now suppose we want to make the largest heading "
250 "size stand out more and make the footnotes a little larger as well. To "
251 "achieve this, the font key should be changed to::"
252 msgstr ""
253
254 #: ../../__w/calibre/calibre/manual/conversion.rst:145
255 msgid ""
256 "The largest headings will now become 18pt, while the footnotes will become "
257 "9pt. You can play with these settings to try and figure out what would be "
258 "optimum for you by using the font rescaling wizard, which can be accessed by"
259 " clicking the little button next to the :guilabel:`Font size key` setting."
260 msgstr ""
261
262 #: ../../__w/calibre/calibre/manual/conversion.rst:150
263 msgid ""
264 "All the font size rescaling in the conversion can also be disabled here, if "
265 "you would like to preserve the font sizes in the input document."
266 msgstr "Semua penskalaan semula saiz fon dalam pertukaran format boleh juga dilumpuhkan di sini, jika anda mahu kekalkan saiz fon seperti dalam dokumen input."
267
268 #: ../../__w/calibre/calibre/manual/conversion.rst:153
269 msgid ""
270 "A related setting is :guilabel:`Line height`. Line height controls the "
271 "vertical height of lines. By default, (a line height of 0), no manipulation "
272 "of line heights is performed. If you specify a non-default value, line "
273 "heights will be set in all locations that don't specify their own line "
274 "heights. However, this is something of a blunt weapon and should be used "
275 "sparingly. If you want to adjust the line heights for some section of the "
276 "input, it's better to use the :ref:`Extra CSS <extra-css>`."
277 msgstr ""
278
279 #: ../../__w/calibre/calibre/manual/conversion.rst:160
280 msgid ""
281 "In this section you can also tell calibre to embed any referenced fonts into"
282 " the book. This will allow the fonts to work on reader devices even if they "
283 "are not available on the device."
284 msgstr ""
285
286 #: ../../__w/calibre/calibre/manual/conversion.rst:165
287 msgid "Text"
288 msgstr "Teks"
289
290 #: ../../__w/calibre/calibre/manual/conversion.rst:167
291 msgid ""
292 "Text can be either justified or not. Justified text has extra spaces between"
293 " words to give a smooth right margin. Some people prefer justified text, "
294 "others do not. Normally, calibre will preserve the justification in the "
295 "original document. If you want to override it you can use the "
296 ":guilabel:`Text justification` option in this section."
297 msgstr ""
298
299 #: ../../__w/calibre/calibre/manual/conversion.rst:173
300 msgid ""
301 "You can also tell calibre to :guilabel:`Smarten punctuation` which will "
302 "replace plain quotes, dashes and ellipses with their typographically correct"
303 " alternatives. Note that this algorithm is not perfect so it is worth "
304 "reviewing the results. The reverse, namely, :guilabel:`Unsmarted "
305 "punctuation` is also available."
306 msgstr ""
307
308 #: ../../__w/calibre/calibre/manual/conversion.rst:178
309 msgid ""
310 "Finally, there is :guilabel:`Input character encoding`. Older documents "
311 "sometimes don't specify their character encoding. When converted, this can "
312 "result in non-English characters or special characters like smart quotes "
313 "being corrupted. calibre tries to auto-detect the character encoding of the"
314 " source document, but it does not always succeed. You can force it to assume"
315 " a particular character encoding by using this setting. `cp1252` is a "
316 "common encoding for documents produced using Windows software. You should "
317 "also read :ref:`char-encoding-faq` for more on encoding issues."
318 msgstr ""
319
320 #: ../../__w/calibre/calibre/manual/conversion.rst:188
321 msgid "Layout"
322 msgstr "Bentangan"
323
324 #: ../../__w/calibre/calibre/manual/conversion.rst:190
325 msgid ""
326 "Normally, paragraphs in XHTML are rendered with a blank line between them "
327 "and no leading text indent. calibre has a couple of options to control this."
328 " :guilabel:`Remove spacing between paragraphs` forcefully ensure that all "
329 "paragraphs have no inter paragraph spacing. It also sets the text indent to "
330 "1.5em (can be changed) to mark the start of every paragraph. "
331 ":guilabel:`Insert blank line` does the opposite, guaranteeing that there is "
332 "exactly one blank line between each pair of paragraphs. Both these options "
333 "are very comprehensive, removing spacing, or inserting it for *all* "
334 "paragraphs (technically <p> and <div> tags). This is so that you can just "
335 "set the option and be sure that it performs as advertised, irrespective of "
336 "how messy the input file is. The one exception is when the input file uses "
337 "hard line breaks to implement inter-paragraph spacing."
338 msgstr ""
339
340 #: ../../__w/calibre/calibre/manual/conversion.rst:201
341 msgid ""
342 "If you want to remove the spacing between all paragraphs, except a select "
343 "few, don't use these options. Instead add the following CSS code to "
344 ":ref:`Extra CSS <extra-css>`::"
345 msgstr ""
346
347 #: ../../__w/calibre/calibre/manual/conversion.rst:207
348 msgid ""
349 "Then, in your source document, mark the paragraphs that need spacing with "
350 "`class=\"spacious\"`. If your input document is not in HTML, use the Debug "
351 "option, described in the Introduction to get HTML (use the :file:`input` "
352 "sub-folder)."
353 msgstr ""
354
355 #: ../../__w/calibre/calibre/manual/conversion.rst:211
356 msgid ""
357 "Another useful options is :guilabel:`Linearize tables`. Some badly designed"
358 " documents use tables to control the layout of text on the page. When "
359 "converted these documents often have text that runs off the page and other "
360 "artifacts. This option will extract the content from the tables and present "
361 "it in a linear fashion. Note that this option linearizes *all* tables, so "
362 "only use it if you are sure the input document does not use tables for "
363 "legitimate purposes, like presenting tabular information."
364 msgstr ""
365
366 #: ../../__w/calibre/calibre/manual/conversion.rst:220
367 msgid "Styling"
368 msgstr "Pengayaan"
369
370 #: ../../__w/calibre/calibre/manual/conversion.rst:224
371 msgid ""
372 "The :guilabel:`Extra CSS` option allows you to specify arbitrary CSS that "
373 "will be applied to all HTML files in the input. This CSS is applied with "
374 "very high priority and so should override most CSS present in the **input "
375 "document** itself. You can use this setting to fine tune the "
376 "presentation/layout of your document. For example, if you want all "
377 "paragraphs of class `endnote` to be right aligned, just add::"
378 msgstr ""
379
380 #: ../../__w/calibre/calibre/manual/conversion.rst:233
381 msgid "or if you want to change the indentation of all paragraphs::"
382 msgstr "atau jika anda mahu ubah indentasi bagi semua perenggan::"
383
384 #: ../../__w/calibre/calibre/manual/conversion.rst:237
385 msgid ""
386 ":guilabel:`Extra CSS` is a very powerful option, but you do need an "
387 "understanding of how CSS works to use it to its full potential. You can use "
388 "the debug pipeline option described above to see what CSS is present in your"
389 " input document."
390 msgstr ""
391
392 #: ../../__w/calibre/calibre/manual/conversion.rst:241
393 msgid ""
394 "A simpler option is to use :guilabel:`Filter style information`. This allows"
395 " you to remove all CSS properties of the specified types from the document. "
396 "For example, you can use it to remove all colors or fonts."
397 msgstr ""
398
399 #: ../../__w/calibre/calibre/manual/conversion.rst:246
400 msgid "Transform styles"
401 msgstr "Gaya jelma"
402
403 #: ../../__w/calibre/calibre/manual/conversion.rst:248
404 msgid ""
405 "This is the most powerful styling related facility. You can use it to define"
406 " rules that change styles based on various conditions. For example you can "
407 "use it to change all green colors to blue, or remove all bold styling from "
408 "the text or color all headings a certain color, etc."
409 msgstr ""
410
411 #: ../../__w/calibre/calibre/manual/conversion.rst:254
412 msgid "Transform HTML"
413 msgstr ""
414
415 #: ../../__w/calibre/calibre/manual/conversion.rst:256
416 msgid ""
417 "Similar to transform styles, but allows you to make changes to the HTML "
418 "content of the book. You can replace one tag with another, add classes or "
419 "other attributes to tags based on their content, etc."
420 msgstr ""
421
422 #: ../../__w/calibre/calibre/manual/conversion.rst:265
423 msgid "Page setup"
424 msgstr "Persediaan halaman"
425
426 #: ../../__w/calibre/calibre/manual/conversion.rst:267
427 msgid ""
428 "The :guilabel:`Page setup` options are for controlling screen layout, like "
429 "margins and screen sizes. There are options to setup page margins, which "
430 "will be used by the output plugin, if the selected output format supports "
431 "page margins. In addition, you should choose an Input profile and an output "
432 "profile. Both sets of profiles basically deal with how to interpret "
433 "measurements in the input/output documents, screen sizes and default font "
434 "rescaling keys."
435 msgstr ""
436
437 #: ../../__w/calibre/calibre/manual/conversion.rst:274
438 msgid ""
439 "If you know that the file you are converting was intended to be used on a "
440 "particular device/software platform, choose the corresponding input profile,"
441 " otherwise just choose the default input profile. If you know the files you "
442 "are producing are meant for a particular device type, choose the "
443 "corresponding output profile. Otherwise, choose one of the Generic output "
444 "profiles. If you are converting to MOBI or AZW3 then you will almost always "
445 "want to choose one of the Kindle output profiles. Otherwise, your best bet "
446 "for modern E-book reading devices is to choose the :guilabel:`Generic e-ink "
447 "HD` output profile."
448 msgstr ""
449
450 #: ../../__w/calibre/calibre/manual/conversion.rst:283
451 msgid ""
452 "The output profile also controls the screen size. This will cause, for "
453 "example, images to be auto-resized to be fit to the screen in some output "
454 "formats. So choose a profile of a device that has a screen size similar to "
455 "your device."
456 msgstr ""
457
458 #: ../../__w/calibre/calibre/manual/conversion.rst:291
459 msgid "Heuristic processing"
460 msgstr "Pemprosesen heuristik"
461
462 #: ../../__w/calibre/calibre/manual/conversion.rst:293
463 msgid ""
464 "Heuristic processing provides a variety of functions which can be used to "
465 "try and detect and correct common problems in poorly formatted input "
466 "documents. Use these functions if your input document suffers from poor "
467 "formatting. Because these functions rely on common patterns, be aware that "
468 "in some cases an option may lead to worse results, so use with care. As an "
469 "example, several of these options will remove all non-breaking-space "
470 "entities, or may include false positive matches relating to the function."
471 msgstr ""
472
473 #: ../../__w/calibre/calibre/manual/conversion.rst:301
474 msgid ":guilabel:`Enable heuristic processing`"
475 msgstr ""
476
477 #: ../../__w/calibre/calibre/manual/conversion.rst:300
478 msgid ""
479 "This option activates calibre's :guilabel:`Heuristic processing` stage of "
480 "the conversion pipeline. This must be enabled in order for various sub-"
481 "functions to be applied"
482 msgstr ""
483
484 #: ../../__w/calibre/calibre/manual/conversion.rst:307
485 msgid ":guilabel:`Unwrap lines`"
486 msgstr ""
487
488 #: ../../__w/calibre/calibre/manual/conversion.rst:304
489 msgid ""
490 "Enabling this option will cause calibre to attempt to detect and correct "
491 "hard line breaks that exist within a document using punctuation clues and "
492 "line length. calibre will first attempt to detect whether hard line breaks "
493 "exist, if they do not appear to exist calibre will not attempt to unwrap "
494 "lines. The line-unwrap factor can be reduced if you want to 'force' calibre "
495 "to unwrap lines."
496 msgstr ""
497
498 #: ../../__w/calibre/calibre/manual/conversion.rst:313
499 msgid ":guilabel:`Line-unwrap factor`"
500 msgstr ""
501
502 #: ../../__w/calibre/calibre/manual/conversion.rst:310
503 msgid ""
504 "This option controls the algorithm calibre uses to remove hard line breaks. "
505 "For example, if the value of this option is 0.4, that means calibre will "
506 "remove hard line breaks from the end of lines whose lengths are less than "
507 "the length of 40% of all lines in the document. If your document only has a "
508 "few line breaks which need correction, then this value should be reduced to "
509 "somewhere between 0.1 and 0.2."
510 msgstr ""
511
512 #: ../../__w/calibre/calibre/manual/conversion.rst:328
513 msgid ""
514 ":guilabel:`Detect and markup unformatted chapter headings and sub headings`"
515 msgstr ""
516
517 #: ../../__w/calibre/calibre/manual/conversion.rst:316
518 msgid ""
519 "If your document does not have chapter headings and titles formatted "
520 "differently from the rest of the text, calibre can use this option to "
521 "attempt to detect them and surround them with heading tags. <h2> tags are "
522 "used for chapter headings; <h3> tags are used for any titles that are "
523 "detected."
524 msgstr ""
525
526 #: ../../__w/calibre/calibre/manual/conversion.rst:320
527 msgid ""
528 "This function will not create a TOC, but in many cases it will cause "
529 "calibre's default chapter detection settings to correctly detect chapters "
530 "and build a TOC. Adjust the XPath under Structure detection if a TOC is not"
531 " automatically created. If there are no other headings used in the document"
532 " then setting \"//h:h2\" under Structure detection would be the easiest way "
533 "to create a TOC for the document."
534 msgstr ""
535
536 #: ../../__w/calibre/calibre/manual/conversion.rst:325
537 msgid ""
538 "The inserted headings are not formatted, to apply formatting use the "
539 ":guilabel:`Extra CSS` option under the Look and Feel conversion settings. "
540 "For example, to center heading tags, use the following::"
541 msgstr ""
542
543 #: ../../__w/calibre/calibre/manual/conversion.rst:333
544 msgid ":guilabel:`Renumber sequences of <h1> or <h2> tags`"
545 msgstr ""
546
547 #: ../../__w/calibre/calibre/manual/conversion.rst:331
548 msgid ""
549 "Some publishers format chapter headings using multiple <h1> or <h2> tags "
550 "sequentially. calibre's default conversion settings will cause such titles "
551 "to be split into two pieces. This option will re-number the heading tags to"
552 " prevent splitting."
553 msgstr ""
554
555 #: ../../__w/calibre/calibre/manual/conversion.rst:344
556 msgid ":guilabel:`Delete blank lines between paragraphs`"
557 msgstr ""
558
559 #: ../../__w/calibre/calibre/manual/conversion.rst:336
560 msgid ""
561 "This option will cause calibre to analyze blank lines included within the "
562 "document. If every paragraph is interleaved with a blank line, then calibre"
563 " will remove all those blank paragraphs. Sequences of multiple blank lines "
564 "will be considered scene breaks and retained as a single paragraph. This "
565 "option differs from the :guilabel:`Remove paragraph spacing` option under "
566 ":guilabel:`Look and Feel` in that it actually modifies the HTML content, "
567 "while the other option modifies the document styles. This option can also "
568 "remove paragraphs which were inserted using calibre's :guilabel:`Insert "
569 "blank line` option."
570 msgstr ""
571
572 #: ../../__w/calibre/calibre/manual/conversion.rst:349
573 msgid ":guilabel:`Ensure scene breaks are consistently formatted`"
574 msgstr ""
575
576 #: ../../__w/calibre/calibre/manual/conversion.rst:347
577 msgid ""
578 "With this option calibre will attempt to detect common scene-break markers "
579 "and ensure that they are center aligned. 'Soft' scene break markers, i.e. "
580 "scene breaks only defined by extra white space, are styled to ensure that "
581 "they will not be displayed in conjunction with page breaks."
582 msgstr ""
583
584 #: ../../__w/calibre/calibre/manual/conversion.rst:365
585 msgid ":guilabel:`Replace scene breaks`"
586 msgstr ""
587
588 #: ../../__w/calibre/calibre/manual/conversion.rst:352
589 msgid ""
590 "If this option is configured then calibre will replace scene break markers "
591 "it finds with the replacement text specified by the user. Please note that "
592 "some ornamental characters may not be supported across all reading devices."
593 msgstr ""
594
595 #: ../../__w/calibre/calibre/manual/conversion.rst:355
596 msgid ""
597 "In general you should avoid using HTML tags, calibre will discard any tags "
598 "and use pre-defined markup. <hr /> tags, i.e. horizontal rules, and <img> "
599 "tags are exceptions. Horizontal rules can optionally be specified with "
600 "styles, if you choose to add your own style be sure to include the 'width' "
601 "setting, otherwise the style information will be discarded. Image tags can "
602 "used, but calibre does not provide the ability to add the image during "
603 "conversion, this must be done after the fact using the 'Edit book' feature."
604 msgstr ""
605
606 #: ../../__w/calibre/calibre/manual/conversion.rst:362
607 msgid ""
608 "Example image tag (place the image within an 'Images' folder inside the EPUB"
609 " after conversion):"
610 msgstr ""
611
612 #: ../../__w/calibre/calibre/manual/conversion.rst:362
613 msgid "<img style=\"width:10%\" src=\"../Images/scenebreak.png\" />"
614 msgstr "<img style=\"width:10%\" src=\"../Images/scenebreak.png\" />"
615
616 #: ../../__w/calibre/calibre/manual/conversion.rst:365
617 msgid "Example horizontal rule with styles:"
618 msgstr "Contoh peraturan mengufuk dengan gaya:"
619
620 #: ../../__w/calibre/calibre/manual/conversion.rst:365
621 msgid ""
622 "<hr style=\"width:20%;padding-top: 1px;border-top: 2px ridge black;border-"
623 "bottom: 2px groove black;\"/>"
624 msgstr "<hr style=\"width:20%;padding-top: 1px;border-top: 2px ridge black;border-bottom: 2px groove black;\"/>"
625
626 #: ../../__w/calibre/calibre/manual/conversion.rst:373
627 msgid ":guilabel:`Remove unnecessary hyphens`"
628 msgstr ":guilabel:`Buang sengkang yang tidak perlu`"
629
630 #: ../../__w/calibre/calibre/manual/conversion.rst:368
631 msgid ""
632 "calibre will analyze all hyphenated content in the document when this option"
633 " is enabled. The document itself is used as a dictionary for analysis. "
634 "This allows calibre to accurately remove hyphens for any words in the "
635 "document in any language, along with made-up and obscure scientific words. "
636 "The primary drawback is words appearing only a single time in the document "
637 "will not be changed. Analysis happens in two passes, the first pass "
638 "analyzes line endings. Lines are only unwrapped if the word exists with or "
639 "without a hyphen in the document. The second pass analyzes all hyphenated "
640 "words throughout the document, hyphens are removed if the word exists "
641 "elsewhere in the document without a match."
642 msgstr ""
643
644 #: ../../__w/calibre/calibre/manual/conversion.rst:377
645 msgid ":guilabel:`Italicize common words and patterns`"
646 msgstr ""
647
648 #: ../../__w/calibre/calibre/manual/conversion.rst:376
649 msgid ""
650 "When enabled, calibre will look for common words and patterns that denote "
651 "italics and italicize them. Examples are common text conventions such as "
652 "~word~ or phrases that should generally be italicized, e.g. latin phrases "
653 "like 'etc.' or 'et cetera'."
654 msgstr ""
655
656 #: ../../__w/calibre/calibre/manual/conversion.rst:381
657 msgid ":guilabel:`Replace entity indents with CSS indents`"
658 msgstr ""
659
660 #: ../../__w/calibre/calibre/manual/conversion.rst:380
661 msgid ""
662 "Some documents use a convention of defining text indents using non-breaking "
663 "space entities. When this option is enabled calibre will attempt to detect "
664 "this sort of formatting and convert them to a 3% text indent using CSS."
665 msgstr ""
666
667 #: ../../__w/calibre/calibre/manual/conversion.rst:386
668 msgid "Search & replace"
669 msgstr ""
670
671 #: ../../__w/calibre/calibre/manual/conversion.rst:388
672 msgid ""
673 "These options are useful primarily for conversion of PDF documents or OCR "
674 "conversions, though they can also be used to fix many document specific "
675 "problems. As an example, some conversions can leaves behind page headers and"
676 " footers in the text. These options use regular expressions to try and "
677 "detect headers, footers, or other arbitrary text and remove or replace them."
678 " Remember that they operate on the intermediate XHTML produced by the "
679 "conversion pipeline. There is a wizard to help you customize the regular "
680 "expressions for your document. Click the magic wand beside the expression "
681 "box, and click the 'Test' button after composing your search expression. "
682 "Successful matches will be highlighted in Yellow."
683 msgstr ""
684
685 #: ../../__w/calibre/calibre/manual/conversion.rst:396
686 msgid ""
687 "The search works by using a Python regular expression. All matched text is "
688 "simply removed from the document or replaced using the replacement pattern. "
689 "The replacement pattern is optional, if left blank then text matching the "
690 "search pattern will be deleted from the document. You can learn more about "
691 "regular expressions and their syntax at :ref:`regexptutorial`."
692 msgstr ""
693
694 #: ../../__w/calibre/calibre/manual/conversion.rst:404
695 msgid "Structure detection"
696 msgstr ""
697
698 #: ../../__w/calibre/calibre/manual/conversion.rst:406
699 msgid ""
700 "Structure detection involves calibre trying its best to detect structural "
701 "elements in the input document, when they are not properly specified. For "
702 "example, chapters, page breaks, headers, footers, etc. As you can imagine, "
703 "this process varies widely from book to book. Fortunately, calibre has very "
704 "powerful options to control this. With power comes complexity, but if once "
705 "you take the time to learn the complexity, you will find it well worth the "
706 "effort."
707 msgstr ""
708
709 #: ../../__w/calibre/calibre/manual/conversion.rst:412
710 msgid "Chapters and page breaks"
711 msgstr ""
712
713 #: ../../__w/calibre/calibre/manual/conversion.rst:414
714 msgid ""
715 "calibre has two sets of options for :guilabel:`chapter detection` and "
716 ":guilabel:`inserting page breaks`. This can sometimes be slightly confusing,"
717 " as by default, calibre will insert page breaks before detected chapters as "
718 "well as the locations detected by the page breaks option. The reason for "
719 "this is that there are often location where page breaks should be inserted "
720 "that are not chapter boundaries. Also, detected chapters can be optionally "
721 "inserted into the auto generated Table of Contents."
722 msgstr ""
723
724 #: ../../__w/calibre/calibre/manual/conversion.rst:419
725 msgid ""
726 "calibre uses *XPath*, a powerful language to allow the user to specify "
727 "chapter boundaries/page breaks. XPath can seem a little daunting to use at "
728 "first, fortunately, there is a :ref:`XPath tutorial <xpath-tutorial>` in the"
729 " User Manual. Remember that Structure detection operates on the intermediate"
730 " XHTML produced by the conversion pipeline. Use the debug option described "
731 "in the :ref:`conversion-introduction` to figure out the appropriate settings"
732 " for your book. There is also a button for a XPath wizard to help with the "
733 "generation of simple XPath expressions."
734 msgstr ""
735
736 #: ../../__w/calibre/calibre/manual/conversion.rst:425
737 msgid ""
738 "By default, calibre uses the following expression for detecting chapters::"
739 msgstr ""
740
741 #: ../../__w/calibre/calibre/manual/conversion.rst:429
742 msgid ""
743 "This expression is rather complex, because it tries to handle a number of "
744 "common cases simultaneously. What it means is that calibre will assume "
745 "chapters start at either `<h1>` or `<h2>` tags that have any of the words "
746 "`(chapter, book, section or part)` in them or that have the "
747 "`class=\"chapter\"` attribute."
748 msgstr ""
749
750 #: ../../__w/calibre/calibre/manual/conversion.rst:433
751 msgid ""
752 "A related option is :guilabel:`Chapter mark`, which allows you to control "
753 "what calibre does when it detects a chapter. By default, it will insert a "
754 "page break before the chapter. You can have it insert a ruled line instead "
755 "of, or in addition to the page break. You can also have it do nothing."
756 msgstr ""
757
758 #: ../../__w/calibre/calibre/manual/conversion.rst:437
759 msgid "The default setting for detecting page breaks is::"
760 msgstr ""
761
762 #: ../../__w/calibre/calibre/manual/conversion.rst:441
763 msgid ""
764 "which means that calibre will insert page breaks before every `<h1>` and "
765 "`<h2>` tag by default."
766 msgstr ""
767
768 #: ../../__w/calibre/calibre/manual/conversion.rst:445
769 msgid ""
770 "The default expressions may change depending on the input format you are "
771 "converting."
772 msgstr ""
773
774 #: ../../__w/calibre/calibre/manual/conversion.rst:448
775 msgid "Miscellaneous"
776 msgstr "Pelbagai"
777
778 #: ../../__w/calibre/calibre/manual/conversion.rst:450
779 msgid "There are a few more options in this section."
780 msgstr "Terdapat sedikit lagi pilihan dalam seksyen ini."
781
782 #: ../../__w/calibre/calibre/manual/conversion.rst:456
783 msgid ":guilabel:`Insert metadata as page at start of book`"
784 msgstr ""
785
786 #: ../../__w/calibre/calibre/manual/conversion.rst:453
787 msgid ""
788 "One of the great things about calibre is that it allows you to maintain very"
789 " complete metadata about all of your books, for example, a rating, tags, "
790 "comments, etc. This option will create a single page with all this metadata "
791 "and insert it into the converted e-book, typically just after the cover. "
792 "Think of it as a way to create your own customised book jacket."
793 msgstr ""
794
795 #: ../../__w/calibre/calibre/manual/conversion.rst:463
796 msgid ":guilabel:`Remove first image`"
797 msgstr ""
798
799 #: ../../__w/calibre/calibre/manual/conversion.rst:459
800 msgid ""
801 "Sometimes, the source document you are converting includes the cover as part"
802 " of the book, instead of as a separate cover. If you also specify a cover in"
803 " calibre, then the converted book will have two covers. This option will "
804 "simply remove the first image from the source document, thereby ensuring "
805 "that the converted book has only one cover, the one specified in calibre."
806 msgstr ""
807
808 #: ../../__w/calibre/calibre/manual/conversion.rst:466
809 msgid "Table of Contents"
810 msgstr "Senarai Kandungan"
811
812 #: ../../__w/calibre/calibre/manual/conversion.rst:468
813 msgid ""
814 "When the input document has a Table of Contents in its metadata, calibre "
815 "will just use that. However, a number of older formats either do not support"
816 " a metadata based Table of Contents, or individual documents do not have "
817 "one. In these cases, the options in this section can help you automatically "
818 "generate a Table of Contents in the converted e-book, based on the actual "
819 "content in the input document."
820 msgstr ""
821
822 #: ../../__w/calibre/calibre/manual/conversion.rst:473
823 msgid ""
824 "Using these options can be a little challenging to get exactly right. If you"
825 " prefer creating/editing the Table of Contents by hand, convert to the EPUB "
826 "or AZW3 formats and select the checkbox at the bottom of the Table of "
827 "Contents section of the conversion dialog that says :guilabel:`Manually "
828 "fine-tune the Table of Contents after conversion`. This will launch the ToC "
829 "Editor tool after the conversion. It allows you to create entries in the "
830 "Table of Contents by simply clicking the place in the book where you want "
831 "the entry to point. You can also use the ToC Editor by itself, without doing"
832 " a conversion. Go to :guilabel:`Preferences->Interface->Toolbars` and add "
833 "the :guilabel:`ToC Editor` to the main toolbar. Then just select the book "
834 "you want to edit and click the :guilabel:`ToC Editor` button."
835 msgstr ""
836
837 #: ../../__w/calibre/calibre/manual/conversion.rst:485
838 msgid ""
839 "The first option is :guilabel:`Force use of auto-generated Table of "
840 "Contents`. By checking this option you can have calibre override any Table "
841 "of Contents found in the metadata of the input document with the auto "
842 "generated one."
843 msgstr ""
844
845 #: ../../__w/calibre/calibre/manual/conversion.rst:489
846 msgid ""
847 "The default way that the creation of the auto generated Table of Contents "
848 "works is that, calibre will first try to add any detected chapters to the "
849 "generated table of contents. You can learn how to customize the detection of"
850 " chapters in the :ref:`structure-detection` section above. If you do not "
851 "want to include detected chapters in the generated table of contents, check "
852 "the :guilabel:`Do not add detected chapters` option."
853 msgstr ""
854
855 #: ../../__w/calibre/calibre/manual/conversion.rst:494
856 msgid ""
857 "If less than the :guilabel:`Chapter threshold` number of chapters were "
858 "detected, calibre will then add any hyperlinks it finds in the input "
859 "document to the Table of Contents. This often works well: many input "
860 "documents include a hyperlinked Table of Contents right at the start. The "
861 ":guilabel:`Number of links` option can be used to control this behavior. If "
862 "set to zero, no links are added. If set to a number greater than zero, at "
863 "most that number of links is added."
864 msgstr ""
865
866 #: ../../__w/calibre/calibre/manual/conversion.rst:500
867 msgid ""
868 "calibre will automatically filter duplicates from the generated Table of "
869 "Contents. However, if there are some additional undesirable entries, you can"
870 " filter them using the :guilabel:`TOC Filter` option. This is a regular "
871 "expression that will match the title of entries in the generated table of "
872 "contents. Whenever a match is found, it will be removed. For example, to "
873 "remove all entries titles \"Next\" or \"Previous\" use::"
874 msgstr ""
875
876 #: ../../__w/calibre/calibre/manual/conversion.rst:507
877 msgid ""
878 "The :guilabel:`Level 1,2,3 TOC` options allow you to create a sophisticated "
879 "multi-level Table of Contents. They are XPath expressions that match tags in"
880 " the intermediate XHTML produced by the conversion pipeline. See the "
881 ":ref:`conversion-introduction` for how to get access to this XHTML. Also "
882 "read the :ref:`xpath-tutorial`, to learn how to construct XPath expressions."
883 " Next to each option is a button that launches a wizard to help with the "
884 "creation of basic XPath expressions. The following simple example "
885 "illustrates how to use these options."
886 msgstr ""
887
888 #: ../../__w/calibre/calibre/manual/conversion.rst:513
889 msgid ""
890 "Suppose you have an input document that results in XHTML that look like "
891 "this:"
892 msgstr ""
893
894 #: ../../__w/calibre/calibre/manual/conversion.rst:535
895 msgid "Then, we set the options as::"
896 msgstr ""
897
898 #: ../../__w/calibre/calibre/manual/conversion.rst:540
899 msgid ""
900 "This will result in an automatically generated two level Table of Contents "
901 "that looks like::"
902 msgstr ""
903
904 #: ../../__w/calibre/calibre/manual/conversion.rst:551
905 msgid ""
906 "Not all output formats support a multi level Table of Contents. You should "
907 "first try with EPUB output. If that works, then try your format of choice."
908 msgstr ""
909
910 #: ../../__w/calibre/calibre/manual/conversion.rst:555
911 msgid "Using images as chapter titles when converting HTML input documents"
912 msgstr ""
913
914 #: ../../__w/calibre/calibre/manual/conversion.rst:557
915 msgid ""
916 "Suppose you want to use an image as your chapter title, but still want "
917 "calibre to be able to automatically generate a Table of Contents for you "
918 "from the chapter titles. Use the following HTML markup to achieve this:"
919 msgstr ""
920
921 #: ../../__w/calibre/calibre/manual/conversion.rst:571
922 msgid ""
923 "Set the :guilabel:`Level 1 TOC` setting to ``//h:h2``. Then, for chapter "
924 "two, calibre will take the title from the value of the ``title`` attribute "
925 "on the ``<h2>`` tag, since the tag has no text."
926 msgstr ""
927
928 #: ../../__w/calibre/calibre/manual/conversion.rst:574
929 msgid ""
930 "Using tag attributes to supply the text for entries in the Table of Contents"
931 msgstr ""
932
933 #: ../../__w/calibre/calibre/manual/conversion.rst:576
934 msgid ""
935 "If you have particularly long chapter titles and want shortened versions in "
936 "the Table of Contents, you can use the title attribute to achieve this, for "
937 "example:"
938 msgstr ""
939
940 #: ../../__w/calibre/calibre/manual/conversion.rst:591
941 msgid ""
942 "Set the :guilabel:`Level 1 TOC` setting to ``//h:h2/@title``. Then calibre "
943 "will take the title from the value of the ``title`` attribute on the "
944 "``<h2>`` tags, instead of using the text inside the tag. Note the trailing "
945 "``/@title`` on the XPath expression, you can use this form to tell calibre "
946 "to get the text from any attribute you like."
947 msgstr ""
948
949 #: ../../__w/calibre/calibre/manual/conversion.rst:598
950 msgid "How options are set/saved for conversion"
951 msgstr ""
952
953 #: ../../__w/calibre/calibre/manual/conversion.rst:600
954 msgid ""
955 "There are two places where conversion options can be set in calibre. The "
956 "first is in Preferences->Conversion. These settings are the defaults for the"
957 " conversion options. Whenever you try to convert a new book, the settings "
958 "set here will be used by default."
959 msgstr ""
960
961 #: ../../__w/calibre/calibre/manual/conversion.rst:605
962 msgid ""
963 "You can also change settings in the conversion dialog for each book "
964 "conversion. When you convert a book, calibre remembers the settings you used"
965 " for that book, so that if you convert it again, the saved settings for the "
966 "individual book will take precedence over the defaults set in "
967 ":guilabel:`Preferences`. You can restore the individual settings to defaults"
968 " by using the :guilabel:`Restore defaults` button in the individual book "
969 "conversion dialog. You can remove the saved settings for a group of books by"
970 " selecting all the books and then clicking the :guilabel:`Edit metadata` "
971 "button to bring up the bulk metadata edit dialog, near the bottom of the "
972 "dialog is an option to remove stored conversion settings."
973 msgstr ""
974
975 #: ../../__w/calibre/calibre/manual/conversion.rst:616
976 msgid ""
977 "When you bulk convert a set of books, settings are taken in the following "
978 "order (last one wins):"
979 msgstr ""
980
981 #: ../../__w/calibre/calibre/manual/conversion.rst:618
982 msgid "From the defaults set in Preferences->Conversion"
983 msgstr ""
984
985 #: ../../__w/calibre/calibre/manual/conversion.rst:620
986 msgid ""
987 "From the saved conversion settings for each book being converted (if any). "
988 "This can be turned off by the option in the top left corner of the Bulk "
989 "conversion dialog."
990 msgstr ""
991
992 #: ../../__w/calibre/calibre/manual/conversion.rst:624
993 msgid "From the settings set in the Bulk conversion dialog"
994 msgstr ""
995
996 #: ../../__w/calibre/calibre/manual/conversion.rst:626
997 msgid ""
998 "Note that the final settings for each book in a Bulk conversion will be "
999 "saved and re-used if the book is converted again. Since the highest priority"
1000 " in Bulk Conversion is given to the settings in the Bulk conversion dialog, "
1001 "these will override any book specific settings. So you should only bulk "
1002 "convert books together that need similar settings. The exceptions are "
1003 "metadata and input format specific settings. Since the Bulk conversion "
1004 "dialog does not have settings for these two categories, they will be taken "
1005 "from book specific settings (if any) or the defaults."
1006 msgstr ""
1007
1008 #: ../../__w/calibre/calibre/manual/conversion.rst:637
1009 msgid ""
1010 "You can see the actual settings used during any conversion by clicking the "
1011 "rotating icon in the lower right corner and then double clicking the "
1012 "individual conversion job. This will bring up a conversion log that will "
1013 "contain the actual settings used, near the top."
1014 msgstr ""
1015
1016 #: ../../__w/calibre/calibre/manual/conversion.rst:642
1017 msgid "Format specific tips"
1018 msgstr ""
1019
1020 #: ../../__w/calibre/calibre/manual/conversion.rst:644
1021 msgid ""
1022 "Here you will find tips specific to the conversion of particular formats. "
1023 "Options specific to particular format, whether input or output are available"
1024 " in the conversion dialog under their own section, for example `TXT input` "
1025 "or `EPUB output`."
1026 msgstr ""
1027
1028 #: ../../__w/calibre/calibre/manual/conversion.rst:649
1029 msgid "Convert Microsoft Word documents"
1030 msgstr "Tukar format dokumen Microsoft Word"
1031
1032 #: ../../__w/calibre/calibre/manual/conversion.rst:651
1033 msgid ""
1034 "calibre can automatically convert ``.docx`` files created by Microsoft Word "
1035 "2007 and newer. Just add the file to calibre and click convert."
1036 msgstr ""
1037
1038 #: ../../__w/calibre/calibre/manual/conversion.rst:655
1039 msgid ""
1040 "There is a :download_file:`demo .docx file <demos/demo.docx>` that "
1041 "demonstrates the capabilities of the calibre conversion engine. Just "
1042 "download it and convert it to EPUB or AZW3 to see what calibre can do."
1043 msgstr ""
1044
1045 #: ../../__w/calibre/calibre/manual/conversion.rst:659
1046 msgid ""
1047 "calibre will automatically generate a Table of Contents based on headings if"
1048 " you mark your headings with the ``Heading 1``, ``Heading 2``, etc. styles "
1049 "in Microsoft Word. Open the output e-book in the calibre E-book viewer and "
1050 "click the :guilabel:`Table of Contents` button to view the generated Table "
1051 "of Contents."
1052 msgstr ""
1053
1054 #: ../../__w/calibre/calibre/manual/conversion.rst:665
1055 msgid "Older .doc files"
1056 msgstr ""
1057
1058 #: ../../__w/calibre/calibre/manual/conversion.rst:667
1059 msgid ""
1060 "For older .doc files, you can save the document as HTML with Microsoft Word "
1061 "and then convert the resulting HTML file with calibre. When saving as HTML, "
1062 "be sure to use the \"Save as Web Page, Filtered\" option as this will "
1063 "produce clean HTML that will convert well. Note that Word produces really "
1064 "messy HTML, converting it can take a long time, so be patient. If you have a"
1065 " newer version of Word available, you can directly save it as .docx as well."
1066 msgstr ""
1067
1068 #: ../../__w/calibre/calibre/manual/conversion.rst:674
1069 msgid ""
1070 "Another alternative is to use the free LibreOffice. Open your .doc file in "
1071 "LibreOffice and save it as .docx, which can be directly converted in "
1072 "calibre."
1073 msgstr ""
1074
1075 #: ../../__w/calibre/calibre/manual/conversion.rst:678
1076 msgid "Convert TXT documents"
1077 msgstr "Tukar format dokumen TXT"
1078
1079 #: ../../__w/calibre/calibre/manual/conversion.rst:680
1080 msgid ""
1081 "TXT documents have no well defined way to specify formatting like bold, "
1082 "italics, etc, or document structure like paragraphs, headings, sections and "
1083 "so on, but there are a variety of conventions commonly used. By default "
1084 "calibre attempts automatic detection of the correct formatting and markup "
1085 "based on those conventions."
1086 msgstr ""
1087
1088 #: ../../__w/calibre/calibre/manual/conversion.rst:685
1089 msgid ""
1090 "TXT input supports a number of options to differentiate how paragraphs are "
1091 "detected."
1092 msgstr ""
1093
1094 #: ../../__w/calibre/calibre/manual/conversion.rst:689
1095 msgid ":guilabel:`Paragraph style: Auto`"
1096 msgstr ""
1097
1098 #: ../../__w/calibre/calibre/manual/conversion.rst:688
1099 msgid ""
1100 "Analyzes the text file and attempts to automatically determine how "
1101 "paragraphs are defined. This option will generally work fine, if you "
1102 "achieve undesirable results try one of the manual options."
1103 msgstr ""
1104
1105 #: ../../__w/calibre/calibre/manual/conversion.rst:697
1106 msgid ":guilabel:`Paragraph style: Block`"
1107 msgstr ""
1108
1109 #: ../../__w/calibre/calibre/manual/conversion.rst:692
1110 msgid "Assumes one or more blank lines are a paragraph boundary::"
1111 msgstr ""
1112
1113 #: ../../__w/calibre/calibre/manual/conversion.rst:704
1114 msgid ":guilabel:`Paragraph style: Single`"
1115 msgstr ""
1116
1117 #: ../../__w/calibre/calibre/manual/conversion.rst:700
1118 msgid "Assumes that every line is a paragraph::"
1119 msgstr ""
1120
1121 #: ../../__w/calibre/calibre/manual/conversion.rst:715
1122 msgid ":guilabel:`Paragraph style: Print`"
1123 msgstr ""
1124
1125 #: ../../__w/calibre/calibre/manual/conversion.rst:707
1126 msgid ""
1127 "Assumes that every paragraph starts with an indent (either a tab or 2+ "
1128 "spaces). Paragraphs end when the next line that starts with an indent is "
1129 "reached::"
1130 msgstr ""
1131
1132 #: ../../__w/calibre/calibre/manual/conversion.rst:719
1133 msgid ":guilabel:`Paragraph style: Unformatted`"
1134 msgstr ""
1135
1136 #: ../../__w/calibre/calibre/manual/conversion.rst:718
1137 msgid ""
1138 "Assumes that the document has no formatting, but does use hard line breaks."
1139 " Punctuation and median line length are used to attempt to re-create "
1140 "paragraphs."
1141 msgstr ""
1142
1143 #: ../../__w/calibre/calibre/manual/conversion.rst:723
1144 msgid ":guilabel:`Formatting style: Auto`"
1145 msgstr ""
1146
1147 #: ../../__w/calibre/calibre/manual/conversion.rst:722
1148 msgid ""
1149 "Attempts to detect the type of formatting markup being used. If no markup "
1150 "is used then heuristic formatting will be applied."
1151 msgstr ""
1152
1153 #: ../../__w/calibre/calibre/manual/conversion.rst:727
1154 msgid ":guilabel:`Formatting style: Heuristic`"
1155 msgstr ""
1156
1157 #: ../../__w/calibre/calibre/manual/conversion.rst:726
1158 msgid ""
1159 "Analyzes the document for common chapter headings, scene breaks, and "
1160 "italicized words and applies the appropriate HTML markup during conversion."
1161 msgstr ""
1162
1163 #: ../../__w/calibre/calibre/manual/conversion.rst:734
1164 msgid ":guilabel:`Formatting style: Markdown`"
1165 msgstr ""
1166
1167 #: ../../__w/calibre/calibre/manual/conversion.rst:730
1168 msgid ""
1169 "calibre also supports running TXT input though a transformation preprocessor"
1170 " known as Markdown. Markdown allows for basic formatting to be added to TXT "
1171 "documents, such as bold, italics, section headings, tables, lists, a Table "
1172 "of Contents, etc. Marking chapter headings with a leading # and setting the "
1173 "chapter XPath detection expression to \"//h:h1\" is the easiest way to have "
1174 "a proper table of contents generated from a TXT document. You can learn more"
1175 " about the Markdown syntax at `daringfireball "
1176 "<https://daringfireball.net/projects/markdown/syntax>`_."
1177 msgstr ""
1178
1179 #: ../../__w/calibre/calibre/manual/conversion.rst:737
1180 msgid ":guilabel:`Formatting style: None`"
1181 msgstr ""
1182
1183 #: ../../__w/calibre/calibre/manual/conversion.rst:737
1184 msgid ""
1185 "Applies no special formatting to the text, the document is converted to HTML"
1186 " with no other changes."
1187 msgstr ""
1188
1189 #: ../../__w/calibre/calibre/manual/conversion.rst:742
1190 msgid "Convert PDF documents"
1191 msgstr ""
1192
1193 #: ../../__w/calibre/calibre/manual/conversion.rst:744
1194 msgid ""
1195 "PDF documents are one of the worst formats to convert from. They are a fixed"
1196 " page size and text placement format. Meaning, it is very difficult to "
1197 "determine where one paragraph ends and another begins. calibre will try to "
1198 "unwrap paragraphs using a configurable, :guilabel:`Line un-wrapping factor`."
1199 " This is a scale used to determine the length at which a line should be "
1200 "unwrapped. Valid values are a decimal between 0 and 1. The default is 0.45, "
1201 "just under the median line length. Lower this value to include more text in "
1202 "the unwrapping. Increase to include less. You can adjust this value in the "
1203 "conversion settings under :guilabel:`PDF Input`."
1204 msgstr ""
1205
1206 #: ../../__w/calibre/calibre/manual/conversion.rst:751
1207 msgid ""
1208 "Also, they often have headers and footers as part of the document that will "
1209 "become included with the text. Use the :guilabel:`Search and replace` panel "
1210 "to remove headers and footers to mitigate this issue. If the headers and "
1211 "footers are not removed from the text it can throw off the paragraph "
1212 "unwrapping. To learn how to use the header and footer removal options, read "
1213 ":ref:`regexptutorial`."
1214 msgstr ""
1215
1216 #: ../../__w/calibre/calibre/manual/conversion.rst:756
1217 msgid "Some limitations of PDF input are:"
1218 msgstr ""
1219
1220 #: ../../__w/calibre/calibre/manual/conversion.rst:758
1221 msgid "Complex, multi-column, and image based documents are not supported."
1222 msgstr ""
1223
1224 #: ../../__w/calibre/calibre/manual/conversion.rst:759
1225 msgid ""
1226 "Extraction of vector images and tables from within the document is also not "
1227 "supported."
1228 msgstr ""
1229
1230 #: ../../__w/calibre/calibre/manual/conversion.rst:760
1231 msgid ""
1232 "Some PDFs use special glyphs to represent ll or ff or fi, etc. Conversion of"
1233 " these may or may not work depending on just how they are represented "
1234 "internally in the PDF."
1235 msgstr ""
1236
1237 #: ../../__w/calibre/calibre/manual/conversion.rst:761
1238 msgid "Links and Tables of Contents are not supported"
1239 msgstr ""
1240
1241 #: ../../__w/calibre/calibre/manual/conversion.rst:762
1242 msgid ""
1243 "PDFs that use embedded non-Unicode fonts to represent non-English characters"
1244 " will result in garbled output for those characters"
1245 msgstr ""
1246
1247 #: ../../__w/calibre/calibre/manual/conversion.rst:763
1248 msgid ""
1249 "Some PDFs are made up of photographs of the page with OCRed text behind "
1250 "them. In such cases calibre uses the OCRed text, which can be very different"
1251 " from what you see when you view the PDF file"
1252 msgstr ""
1253
1254 #: ../../__w/calibre/calibre/manual/conversion.rst:764
1255 msgid ""
1256 "PDFs that are used to display complex text, like right to left languages and"
1257 " math typesetting will not convert correctly"
1258 msgstr ""
1259
1260 #: ../../__w/calibre/calibre/manual/conversion.rst:766
1261 msgid ""
1262 "To re-iterate **PDF is a really, really bad** format to use as input. If you"
1263 " absolutely must use PDF, then be prepared for an output ranging anywhere "
1264 "from decent to unusable, depending on the input PDF."
1265 msgstr ""
1266
1267 #: ../../__w/calibre/calibre/manual/conversion.rst:770
1268 msgid "Comic book collections"
1269 msgstr ""
1270
1271 #: ../../__w/calibre/calibre/manual/conversion.rst:772
1272 msgid ""
1273 "A comic book collection is a .cbc file. A .cbc file is a ZIP file that "
1274 "contains other CBZ/CBR files. In addition the .cbc file must contain a "
1275 "simple text file called comics.txt, encoded in UTF-8. The comics.txt file "
1276 "must contain a list of the comics files inside the .cbc file, in the form "
1277 "filename:title, as shown below::"
1278 msgstr ""
1279
1280 #: ../../__w/calibre/calibre/manual/conversion.rst:780
1281 msgid "The .cbc file will then contain::"
1282 msgstr ""
1283
1284 #: ../../__w/calibre/calibre/manual/conversion.rst:787
1285 msgid ""
1286 "calibre will automatically convert this .cbc file into a e-book with a Table"
1287 " of Contents pointing to each entry in comics.txt."
1288 msgstr ""
1289
1290 #: ../../__w/calibre/calibre/manual/conversion.rst:791
1291 msgid "EPUB advanced formatting demo"
1292 msgstr ""
1293
1294 #: ../../__w/calibre/calibre/manual/conversion.rst:793
1295 msgid ""
1296 "Various advanced formatting for EPUB files is demonstrated in this "
1297 ":download_file:`demo file <demos/demo.epub>`. The file was created from hand"
1298 " coded HTML using calibre and is meant to be used as a template for your own"
1299 " EPUB creation efforts."
1300 msgstr ""
1301
1302 #: ../../__w/calibre/calibre/manual/conversion.rst:796
1303 msgid ""
1304 "The source HTML it was created from is available :download_file:`demo.zip "
1305 "<demos/demo.zip>`. The settings used to create the EPUB from the ZIP file "
1306 "are::"
1307 msgstr ""
1308
1309 #: ../../__w/calibre/calibre/manual/conversion.rst:801
1310 msgid ""
1311 "Note that because this file explores the potential of EPUB, most of the "
1312 "advanced formatting is not going to work on readers less capable than "
1313 "calibre's built-in EPUB viewer."
1314 msgstr ""
1315
1316 #: ../../__w/calibre/calibre/manual/conversion.rst:805
1317 msgid "Convert ODT documents"
1318 msgstr ""
1319
1320 #: ../../__w/calibre/calibre/manual/conversion.rst:807
1321 msgid ""
1322 "calibre can directly convert ODT (OpenDocument Text) files. You should use "
1323 "styles to format your document and minimize the use of direct formatting. "
1324 "When inserting images into your document you need to anchor them to the "
1325 "paragraph, images anchored to a page will all end up in the front of the "
1326 "conversion."
1327 msgstr ""
1328
1329 #: ../../__w/calibre/calibre/manual/conversion.rst:810
1330 msgid ""
1331 "To enable automatic detection of chapters, you need to mark them with the "
1332 "built-in styles called :guilabel:`Heading 1`, :guilabel:`Heading 2`, ..., "
1333 ":guilabel:`Heading 6` (:guilabel:`Heading 1` equates to the HTML tag "
1334 "``<h1>``, :guilabel:`Heading 2` to ``<h2>``, etc). When you convert in "
1335 "calibre you can enter which style you used into the :guilabel:`Detect "
1336 "chapters at` box. Example:"
1337 msgstr ""
1338
1339 #: ../../__w/calibre/calibre/manual/conversion.rst:816
1340 msgid ""
1341 "If you mark Chapters with style :guilabel:`Heading 2`, you have to set the "
1342 "'Detect chapters at' box to ``//h:h2``"
1343 msgstr ""
1344
1345 #: ../../__w/calibre/calibre/manual/conversion.rst:817
1346 msgid ""
1347 "For a nested TOC with Sections marked with :guilabel:`Heading 2` and the "
1348 "Chapters marked with :guilabel:`Heading 3` you need to enter "
1349 "``//h:h2|//h:h3``. On the Convert - TOC page set the :guilabel:`Level 1 TOC`"
1350 " box to ``//h:h2`` and the :guilabel:`Level 2 TOC` box to ``//h:h3``."
1351 msgstr ""
1352
1353 #: ../../__w/calibre/calibre/manual/conversion.rst:819
1354 msgid ""
1355 "Well-known document properties (Title, Keywords, Description, Creator) are "
1356 "recognized and calibre will use the first image (not to small, and with good"
1357 " aspect-ratio) as the cover image."
1358 msgstr ""
1359
1360 #: ../../__w/calibre/calibre/manual/conversion.rst:821
1361 msgid ""
1362 "There is also an advanced property conversion mode, which is activated by "
1363 "setting the custom property ``opf.metadata`` ('Yes or No' type) to Yes in "
1364 "your ODT document (File->Properties->Custom Properties). If this property is"
1365 " detected by calibre, the following custom properties are recognized "
1366 "(``opf.authors`` overrides document creator)::"
1367 msgstr ""
1368
1369 #: ../../__w/calibre/calibre/manual/conversion.rst:834
1370 msgid ""
1371 "In addition to this, you can specify the picture to use as the cover by "
1372 "naming it ``opf.cover`` (right click, Picture->Options->Name) in the ODT. If"
1373 " no picture with this name is found, the 'smart' method is used. As the "
1374 "cover detection might result in double covers in certain output formats, the"
1375 " process will remove the paragraph (only if the only content is the cover!) "
1376 "from the document. But this works only with the named picture!"
1377 msgstr ""
1378
1379 #: ../../__w/calibre/calibre/manual/conversion.rst:841
1380 msgid ""
1381 "To disable cover detection you can set the custom property ``opf.nocover`` "
1382 "('Yes or No' type) to Yes in advanced mode."
1383 msgstr ""
1384
1385 #: ../../__w/calibre/calibre/manual/conversion.rst:844
1386 msgid "Converting to PDF"
1387 msgstr ""
1388
1389 #: ../../__w/calibre/calibre/manual/conversion.rst:846
1390 msgid ""
1391 "The first, most important, setting to decide on when converting to PDF is "
1392 "the page size. By default, calibre uses a page size of \"U.S. Letter\". You "
1393 "can change this to another standard page size or a completely custom size in"
1394 " the :guilabel:`PDF Output` section of the conversion dialog. If you are "
1395 "generating a PDF to be used on a specific device, you can turn on the option"
1396 " to use the page size from the :guilabel:`output profile` instead. So if "
1397 "your output profile is set to Kindle, calibre will create a PDF with page "
1398 "size suitable for viewing on the small Kindle screen."
1399 msgstr ""
1400
1401 #: ../../__w/calibre/calibre/manual/conversion.rst:856
1402 msgid "Headers and Footers"
1403 msgstr ""
1404
1405 #: ../../__w/calibre/calibre/manual/conversion.rst:857
1406 msgid ""
1407 "You can insert arbitrary headers and footers on each page of the PDF by "
1408 "specifying header and footer templates. Templates are just snippets of HTML "
1409 "code that get rendered in the header and footer locations. For example, to "
1410 "display page numbers centered at the bottom of every page, in green, use the"
1411 " following footer template::"
1412 msgstr ""
1413
1414 #: ../../__w/calibre/calibre/manual/conversion.rst:865
1415 msgid ""
1416 "calibre will automatically replace :code:`_PAGENUM_` with the current page "
1417 "number. You can even put different content on even and odd pages, for "
1418 "example the following header template will show the title on odd pages and "
1419 "the author on even pages::"
1420 msgstr ""
1421
1422 #: ../../__w/calibre/calibre/manual/conversion.rst:874
1423 msgid ""
1424 "calibre will automatically replace :code:`_TITLE_` and :code:`_AUTHOR_` with"
1425 " the title and author of the document being converted. Setting "
1426 ":code:`justify-content` to :code:`flex-end` will cause the text to be right "
1427 "aligned."
1428 msgstr ""
1429
1430 #: ../../__w/calibre/calibre/manual/conversion.rst:879
1431 msgid ""
1432 "You can also display text at the left and right edges and change the font "
1433 "size, as demonstrated with this header template::"
1434 msgstr ""
1435
1436 #: ../../__w/calibre/calibre/manual/conversion.rst:887
1437 msgid ""
1438 "This will display the title at the left and the author at the right, in a "
1439 "font size smaller than the main text."
1440 msgstr ""
1441
1442 #: ../../__w/calibre/calibre/manual/conversion.rst:890
1443 msgid "You can also use the current section in templates, as shown below::"
1444 msgstr ""
1445
1446 #: ../../__w/calibre/calibre/manual/conversion.rst:894
1447 msgid ""
1448 ":code:`_SECTION_` is replaced by whatever the name of the current section "
1449 "is. These names are taken from the metadata Table of Contents in the "
1450 "document (the PDF Outline). If the document has no table of contents then it"
1451 " will be replaced by empty text. If a single PDF page has multiple sections,"
1452 " the first section on the page will be used. Similarly, there is a variable "
1453 "named :code:`_TOP_LEVEL_SECTION_` that can be used to get the name of the "
1454 "current top-level section."
1455 msgstr ""
1456
1457 #: ../../__w/calibre/calibre/manual/conversion.rst:901
1458 msgid ""
1459 "You can even use JavaScript inside the header and footer templates, for "
1460 "example, the following template will cause page numbers to start at 4 "
1461 "instead of 1::"
1462 msgstr ""
1463
1464 #: ../../__w/calibre/calibre/manual/conversion.rst:911
1465 msgid ""
1466 "In addition there are some more variables you can use in the headers and "
1467 "footers, documented below:"
1468 msgstr ""
1469
1470 #: ../../__w/calibre/calibre/manual/conversion.rst:914
1471 msgid ""
1472 "``_TOTAL_PAGES_`` - total number of pages in the PDF file, useful for "
1473 "implementing a progress counter, for example."
1474 msgstr ""
1475
1476 #: ../../__w/calibre/calibre/manual/conversion.rst:916
1477 msgid ""
1478 "``_TOP_LEVEL_SECTION_PAGES_`` - total number of pages in the current top "
1479 "level section"
1480 msgstr ""
1481
1482 #: ../../__w/calibre/calibre/manual/conversion.rst:918
1483 msgid ""
1484 "``_TOP_LEVEL_SECTION_PAGENUM_`` - the page number of the current page within"
1485 " the current top level section"
1486 msgstr ""
1487
1488 #: ../../__w/calibre/calibre/manual/conversion.rst:921
1489 msgid ""
1490 "When adding headers and footers make sure you set the page top and bottom "
1491 "margins to large enough values, under the :guilabel:`PDF Output` section of "
1492 "the conversion dialog."
1493 msgstr ""
1494
1495 #: ../../__w/calibre/calibre/manual/conversion.rst:926
1496 msgid "Printable Table of Contents"
1497 msgstr "Senarai Kandungan Boleh Cetak"
1498
1499 #: ../../__w/calibre/calibre/manual/conversion.rst:928
1500 msgid ""
1501 "You can also insert a printable Table of Contents at the end of the PDF that"
1502 " lists the page numbers for every section. This is very useful if you intend"
1503 " to print out the PDF to paper. If you wish to use the PDF on an electronic "
1504 "device, then the PDF Outline provides this functionality and is generated by"
1505 " default."
1506 msgstr ""
1507
1508 #: ../../__w/calibre/calibre/manual/conversion.rst:933
1509 msgid ""
1510 "You can customize the look of the generated Table of contents by using the "
1511 "Extra CSS conversion setting under the Look & feel part of the conversion "
1512 "dialog. The default CSS used is listed below, simply copy it and make "
1513 "whatever changes you like."
1514 msgstr ""
1515
1516 #: ../../__w/calibre/calibre/manual/conversion.rst:953
1517 msgid "Custom page margins for individual HTML files"
1518 msgstr ""
1519
1520 #: ../../__w/calibre/calibre/manual/conversion.rst:955
1521 msgid ""
1522 "If you are converting an EPUB or AZW3 file with multiple individual HTML "
1523 "files inside it and you want to change the page margins for a particular "
1524 "HTML file you can add the following style block to the HTML file using the "
1525 "calibre E-book editor:"
1526 msgstr ""
1527
1528 #: ../../__w/calibre/calibre/manual/conversion.rst:972
1529 msgid ""
1530 "Then, in the PDF output section of the conversion dialog, turn on the option"
1531 " to :guilabel:`Use page margins from the document being converted`. Now all "
1532 "pages generated from this HTML file will have ``10pt`` margins."
1533 msgstr ""