| 1 |
/* |
| 2 |
* Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <platform_def.h> |
| 8 |
|
| 9 |
#include <arch_helpers.h> |
| 10 |
#include <common/debug.h> |
| 11 |
|
| 12 |
#include <dram.h> |
| 13 |
#include <plat_private.h> |
| 14 |
#include <pmu.h> |
| 15 |
#include <pmu_bits.h> |
| 16 |
#include <pmu_regs.h> |
| 17 |
#include <rk3399_def.h> |
| 18 |
#include <secure.h> |
| 19 |
#include <soc.h> |
| 20 |
#include <suspend.h> |
| 21 |
|
| 22 |
#define PMUGRF_OS_REG0 0x300 |
| 23 |
#define PMUGRF_OS_REG1 0x304 |
| 24 |
#define PMUGRF_OS_REG2 0x308 |
| 25 |
#define PMUGRF_OS_REG3 0x30c |
| 26 |
|
| 27 |
#define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \ |
| 28 |
((n) << (8 + (ch) * 4))) |
| 29 |
#define CRU_SFTRST_DDR_PHY(ch, n) ((0x1 << (9 + 16 + (ch) * 4)) | \ |
| 30 |
((n) << (9 + (ch) * 4))) |
| 31 |
|
| 32 |
#define FBDIV_ENC(n) ((n) << 16) |
| 33 |
#define FBDIV_DEC(n) (((n) >> 16) & 0xfff) |
| 34 |
#define POSTDIV2_ENC(n) ((n) << 12) |
| 35 |
#define POSTDIV2_DEC(n) (((n) >> 12) & 0x7) |
| 36 |
#define POSTDIV1_ENC(n) ((n) << 8) |
| 37 |
#define POSTDIV1_DEC(n) (((n) >> 8) & 0x7) |
| 38 |
#define REFDIV_ENC(n) (n) |
| 39 |
#define REFDIV_DEC(n) ((n) & 0x3f) |
| 40 |
|
| 41 |
/* PMU CRU */ |
| 42 |
#define PMUCRU_RSTNHOLD_CON0 0x120 |
| 43 |
#define PMUCRU_RSTNHOLD_CON1 0x124 |
| 44 |
|
| 45 |
#define PRESET_GPIO0_HOLD(n) (((n) << 7) | WMSK_BIT(7)) |
| 46 |
#define PRESET_GPIO1_HOLD(n) (((n) << 8) | WMSK_BIT(8)) |
| 47 |
|
| 48 |
#define SYS_COUNTER_FREQ_IN_MHZ (SYS_COUNTER_FREQ_IN_TICKS / 1000000) |
| 49 |
|
| 50 |
__pmusramdata uint32_t dpll_data[PLL_CON_COUNT]; |
| 51 |
__pmusramdata uint32_t cru_clksel_con6; |
| 52 |
__pmusramdata uint8_t pmu_enable_watchdog0; |
| 53 |
|
| 54 |
/* |
| 55 |
* Copy @num registers from @src to @dst |
| 56 |
*/ |
| 57 |
static __pmusramfunc void sram_regcpy(uintptr_t dst, uintptr_t src, |
| 58 |
uint32_t num) |
| 59 |
{ |
| 60 |
while (num--) { |
| 61 |
mmio_write_32(dst, mmio_read_32(src)); |
| 62 |
dst += sizeof(uint32_t); |
| 63 |
src += sizeof(uint32_t); |
| 64 |
} |
| 65 |
} |
| 66 |
|
| 67 |
/* |
| 68 |
* Copy @num registers from @src to @dst |
| 69 |
* This is intentionally a copy of the sram_regcpy function. PMUSRAM functions |
| 70 |
* cannot be called from code running in DRAM. |
| 71 |
*/ |
| 72 |
static void dram_regcpy(uintptr_t dst, uintptr_t src, uint32_t num) |
| 73 |
{ |
| 74 |
while (num--) { |
| 75 |
mmio_write_32(dst, mmio_read_32(src)); |
| 76 |
dst += sizeof(uint32_t); |
| 77 |
src += sizeof(uint32_t); |
| 78 |
} |
| 79 |
} |
| 80 |
|
| 81 |
static __pmusramfunc uint32_t sram_get_timer_value(void) |
| 82 |
{ |
| 83 |
/* |
| 84 |
* Generic delay timer implementation expects the timer to be a down |
| 85 |
* counter. We apply bitwise NOT operator to the tick values returned |
| 86 |
* by read_cntpct_el0() to simulate the down counter. |
| 87 |
*/ |
| 88 |
return (uint32_t)(~read_cntpct_el0()); |
| 89 |
} |
| 90 |
|
| 91 |
static __pmusramfunc void sram_udelay(uint32_t usec) |
| 92 |
{ |
| 93 |
uint32_t start, cnt, delta, total_ticks; |
| 94 |
|
| 95 |
/* counter is decreasing */ |
| 96 |
start = sram_get_timer_value(); |
| 97 |
total_ticks = usec * SYS_COUNTER_FREQ_IN_MHZ; |
| 98 |
do { |
| 99 |
cnt = sram_get_timer_value(); |
| 100 |
if (cnt > start) { |
| 101 |
delta = UINT32_MAX - cnt; |
| 102 |
delta += start; |
| 103 |
} else |
| 104 |
delta = start - cnt; |
| 105 |
} while (delta <= total_ticks); |
| 106 |
} |
| 107 |
|
| 108 |
static __pmusramfunc void configure_sgrf(void) |
| 109 |
{ |
| 110 |
/* |
| 111 |
* SGRF_DDR_RGN_DPLL_CLK and SGRF_DDR_RGN_RTC_CLK: |
| 112 |
* IC ECO bug, need to set this register. |
| 113 |
* |
| 114 |
* SGRF_DDR_RGN_BYPS: |
| 115 |
* After the PD_CENTER suspend/resume, the DDR region |
| 116 |
* related registers in the SGRF will be reset, we |
| 117 |
* need to re-initialize them. |
| 118 |
*/ |
| 119 |
mmio_write_32(SGRF_BASE + SGRF_DDRRGN_CON0_16(16), |
| 120 |
SGRF_DDR_RGN_DPLL_CLK | |
| 121 |
SGRF_DDR_RGN_RTC_CLK | |
| 122 |
SGRF_DDR_RGN_BYPS); |
| 123 |
} |
| 124 |
|
| 125 |
static __pmusramfunc void rkclk_ddr_reset(uint32_t channel, uint32_t ctl, |
| 126 |
uint32_t phy) |
| 127 |
{ |
| 128 |
channel &= 0x1; |
| 129 |
ctl &= 0x1; |
| 130 |
phy &= 0x1; |
| 131 |
mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(4), |
| 132 |
CRU_SFTRST_DDR_CTRL(channel, ctl) | |
| 133 |
CRU_SFTRST_DDR_PHY(channel, phy)); |
| 134 |
} |
| 135 |
|
| 136 |
static __pmusramfunc void phy_pctrl_reset(uint32_t ch) |
| 137 |
{ |
| 138 |
rkclk_ddr_reset(ch, 1, 1); |
| 139 |
sram_udelay(10); |
| 140 |
rkclk_ddr_reset(ch, 1, 0); |
| 141 |
sram_udelay(10); |
| 142 |
rkclk_ddr_reset(ch, 0, 0); |
| 143 |
sram_udelay(10); |
| 144 |
} |
| 145 |
|
| 146 |
static __pmusramfunc void set_cs_training_index(uint32_t ch, uint32_t rank) |
| 147 |
{ |
| 148 |
uint32_t byte; |
| 149 |
|
| 150 |
/* PHY_8/136/264/392 phy_per_cs_training_index_X 1bit offset_24 */ |
| 151 |
for (byte = 0; byte < 4; byte++) |
| 152 |
mmio_clrsetbits_32(PHY_REG(ch, 8 + (128 * byte)), 0x1 << 24, |
| 153 |
rank << 24); |
| 154 |
} |
| 155 |
|
| 156 |
static __pmusramfunc void select_per_cs_training_index(uint32_t ch, |
| 157 |
uint32_t rank) |
| 158 |
{ |
| 159 |
/* PHY_84 PHY_PER_CS_TRAINING_EN_0 1bit offset_16 */ |
| 160 |
if ((mmio_read_32(PHY_REG(ch, 84)) >> 16) & 1) |
| 161 |
set_cs_training_index(ch, rank); |
| 162 |
} |
| 163 |
|
| 164 |
static __pmusramfunc void override_write_leveling_value(uint32_t ch) |
| 165 |
{ |
| 166 |
uint32_t byte; |
| 167 |
|
| 168 |
for (byte = 0; byte < 4; byte++) { |
| 169 |
/* |
| 170 |
* PHY_8/136/264/392 |
| 171 |
* phy_per_cs_training_multicast_en_X 1bit offset_16 |
| 172 |
*/ |
| 173 |
mmio_clrsetbits_32(PHY_REG(ch, 8 + (128 * byte)), 0x1 << 16, |
| 174 |
1 << 16); |
| 175 |
mmio_clrsetbits_32(PHY_REG(ch, 63 + (128 * byte)), |
| 176 |
0xffffu << 16, |
| 177 |
0x200 << 16); |
| 178 |
} |
| 179 |
|
| 180 |
/* CTL_200 ctrlupd_req 1bit offset_8 */ |
| 181 |
mmio_clrsetbits_32(CTL_REG(ch, 200), 0x1 << 8, 0x1 << 8); |
| 182 |
} |
| 183 |
|
| 184 |
static __pmusramfunc int data_training(uint32_t ch, |
| 185 |
struct rk3399_sdram_params *sdram_params, |
| 186 |
uint32_t training_flag) |
| 187 |
{ |
| 188 |
uint32_t obs_0, obs_1, obs_2, obs_3, obs_err = 0; |
| 189 |
uint32_t rank = sdram_params->ch[ch].rank; |
| 190 |
uint32_t rank_mask; |
| 191 |
uint32_t i, tmp; |
| 192 |
|
| 193 |
if (sdram_params->dramtype == LPDDR4) |
| 194 |
rank_mask = (rank == 1) ? 0x5 : 0xf; |
| 195 |
else |
| 196 |
rank_mask = (rank == 1) ? 0x1 : 0x3; |
| 197 |
|
| 198 |
/* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ |
| 199 |
mmio_setbits_32(PHY_REG(ch, 927), (1 << 22)); |
| 200 |
|
| 201 |
if (training_flag == PI_FULL_TRAINING) { |
| 202 |
if (sdram_params->dramtype == LPDDR4) { |
| 203 |
training_flag = PI_WRITE_LEVELING | |
| 204 |
PI_READ_GATE_TRAINING | |
| 205 |
PI_READ_LEVELING | |
| 206 |
PI_WDQ_LEVELING; |
| 207 |
} else if (sdram_params->dramtype == LPDDR3) { |
| 208 |
training_flag = PI_CA_TRAINING | PI_WRITE_LEVELING | |
| 209 |
PI_READ_GATE_TRAINING; |
| 210 |
} else if (sdram_params->dramtype == DDR3) { |
| 211 |
training_flag = PI_WRITE_LEVELING | |
| 212 |
PI_READ_GATE_TRAINING | |
| 213 |
PI_READ_LEVELING; |
| 214 |
} |
| 215 |
} |
| 216 |
|
| 217 |
/* ca training(LPDDR4,LPDDR3 support) */ |
| 218 |
if ((training_flag & PI_CA_TRAINING) == PI_CA_TRAINING) { |
| 219 |
for (i = 0; i < 4; i++) { |
| 220 |
if (!(rank_mask & (1 << i))) |
| 221 |
continue; |
| 222 |
|
| 223 |
select_per_cs_training_index(ch, i); |
| 224 |
/* PI_100 PI_CALVL_EN:RW:8:2 */ |
| 225 |
mmio_clrsetbits_32(PI_REG(ch, 100), 0x3 << 8, 0x2 << 8); |
| 226 |
|
| 227 |
/* PI_92 PI_CALVL_REQ:WR:16:1,PI_CALVL_CS:RW:24:2 */ |
| 228 |
mmio_clrsetbits_32(PI_REG(ch, 92), |
| 229 |
(0x1 << 16) | (0x3 << 24), |
| 230 |
(0x1 << 16) | (i << 24)); |
| 231 |
while (1) { |
| 232 |
/* PI_174 PI_INT_STATUS:RD:8:18 */ |
| 233 |
tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| 234 |
|
| 235 |
/* |
| 236 |
* check status obs |
| 237 |
* PHY_532/660/788 phy_adr_calvl_obs1_:0:32 |
| 238 |
*/ |
| 239 |
obs_0 = mmio_read_32(PHY_REG(ch, 532)); |
| 240 |
obs_1 = mmio_read_32(PHY_REG(ch, 660)); |
| 241 |
obs_2 = mmio_read_32(PHY_REG(ch, 788)); |
| 242 |
if (((obs_0 >> 30) & 0x3) || |
| 243 |
((obs_1 >> 30) & 0x3) || |
| 244 |
((obs_2 >> 30) & 0x3)) |
| 245 |
obs_err = 1; |
| 246 |
if ((((tmp >> 11) & 0x1) == 0x1) && |
| 247 |
(((tmp >> 13) & 0x1) == 0x1) && |
| 248 |
(((tmp >> 5) & 0x1) == 0x0) && |
| 249 |
(obs_err == 0)) |
| 250 |
break; |
| 251 |
else if ((((tmp >> 5) & 0x1) == 0x1) || |
| 252 |
(obs_err == 1)) |
| 253 |
return -1; |
| 254 |
} |
| 255 |
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| 256 |
mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| 257 |
} |
| 258 |
mmio_clrbits_32(PI_REG(ch, 100), 0x3 << 8); |
| 259 |
} |
| 260 |
|
| 261 |
/* write leveling(LPDDR4,LPDDR3,DDR3 support) */ |
| 262 |
if ((training_flag & PI_WRITE_LEVELING) == PI_WRITE_LEVELING) { |
| 263 |
for (i = 0; i < rank; i++) { |
| 264 |
select_per_cs_training_index(ch, i); |
| 265 |
/* PI_60 PI_WRLVL_EN:RW:8:2 */ |
| 266 |
mmio_clrsetbits_32(PI_REG(ch, 60), 0x3 << 8, 0x2 << 8); |
| 267 |
/* PI_59 PI_WRLVL_REQ:WR:8:1,PI_WRLVL_CS:RW:16:2 */ |
| 268 |
mmio_clrsetbits_32(PI_REG(ch, 59), |
| 269 |
(0x1 << 8) | (0x3 << 16), |
| 270 |
(0x1 << 8) | (i << 16)); |
| 271 |
|
| 272 |
while (1) { |
| 273 |
/* PI_174 PI_INT_STATUS:RD:8:18 */ |
| 274 |
tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| 275 |
|
| 276 |
/* |
| 277 |
* check status obs, if error maybe can not |
| 278 |
* get leveling done PHY_40/168/296/424 |
| 279 |
* phy_wrlvl_status_obs_X:0:13 |
| 280 |
*/ |
| 281 |
obs_0 = mmio_read_32(PHY_REG(ch, 40)); |
| 282 |
obs_1 = mmio_read_32(PHY_REG(ch, 168)); |
| 283 |
obs_2 = mmio_read_32(PHY_REG(ch, 296)); |
| 284 |
obs_3 = mmio_read_32(PHY_REG(ch, 424)); |
| 285 |
if (((obs_0 >> 12) & 0x1) || |
| 286 |
((obs_1 >> 12) & 0x1) || |
| 287 |
((obs_2 >> 12) & 0x1) || |
| 288 |
((obs_3 >> 12) & 0x1)) |
| 289 |
obs_err = 1; |
| 290 |
if ((((tmp >> 10) & 0x1) == 0x1) && |
| 291 |
(((tmp >> 13) & 0x1) == 0x1) && |
| 292 |
(((tmp >> 4) & 0x1) == 0x0) && |
| 293 |
(obs_err == 0)) |
| 294 |
break; |
| 295 |
else if ((((tmp >> 4) & 0x1) == 0x1) || |
| 296 |
(obs_err == 1)) |
| 297 |
return -1; |
| 298 |
} |
| 299 |
|
| 300 |
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| 301 |
mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| 302 |
} |
| 303 |
override_write_leveling_value(ch); |
| 304 |
mmio_clrbits_32(PI_REG(ch, 60), 0x3 << 8); |
| 305 |
} |
| 306 |
|
| 307 |
/* read gate training(LPDDR4,LPDDR3,DDR3 support) */ |
| 308 |
if ((training_flag & PI_READ_GATE_TRAINING) == PI_READ_GATE_TRAINING) { |
| 309 |
for (i = 0; i < rank; i++) { |
| 310 |
select_per_cs_training_index(ch, i); |
| 311 |
/* PI_80 PI_RDLVL_GATE_EN:RW:24:2 */ |
| 312 |
mmio_clrsetbits_32(PI_REG(ch, 80), 0x3 << 24, |
| 313 |
0x2 << 24); |
| 314 |
/* |
| 315 |
* PI_74 PI_RDLVL_GATE_REQ:WR:16:1 |
| 316 |
* PI_RDLVL_CS:RW:24:2 |
| 317 |
*/ |
| 318 |
mmio_clrsetbits_32(PI_REG(ch, 74), |
| 319 |
(0x1 << 16) | (0x3 << 24), |
| 320 |
(0x1 << 16) | (i << 24)); |
| 321 |
|
| 322 |
while (1) { |
| 323 |
/* PI_174 PI_INT_STATUS:RD:8:18 */ |
| 324 |
tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| 325 |
|
| 326 |
/* |
| 327 |
* check status obs |
| 328 |
* PHY_43/171/299/427 |
| 329 |
* PHY_GTLVL_STATUS_OBS_x:16:8 |
| 330 |
*/ |
| 331 |
obs_0 = mmio_read_32(PHY_REG(ch, 43)); |
| 332 |
obs_1 = mmio_read_32(PHY_REG(ch, 171)); |
| 333 |
obs_2 = mmio_read_32(PHY_REG(ch, 299)); |
| 334 |
obs_3 = mmio_read_32(PHY_REG(ch, 427)); |
| 335 |
if (((obs_0 >> (16 + 6)) & 0x3) || |
| 336 |
((obs_1 >> (16 + 6)) & 0x3) || |
| 337 |
((obs_2 >> (16 + 6)) & 0x3) || |
| 338 |
((obs_3 >> (16 + 6)) & 0x3)) |
| 339 |
obs_err = 1; |
| 340 |
if ((((tmp >> 9) & 0x1) == 0x1) && |
| 341 |
(((tmp >> 13) & 0x1) == 0x1) && |
| 342 |
(((tmp >> 3) & 0x1) == 0x0) && |
| 343 |
(obs_err == 0)) |
| 344 |
break; |
| 345 |
else if ((((tmp >> 3) & 0x1) == 0x1) || |
| 346 |
(obs_err == 1)) |
| 347 |
return -1; |
| 348 |
} |
| 349 |
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| 350 |
mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| 351 |
} |
| 352 |
mmio_clrbits_32(PI_REG(ch, 80), 0x3 << 24); |
| 353 |
} |
| 354 |
|
| 355 |
/* read leveling(LPDDR4,LPDDR3,DDR3 support) */ |
| 356 |
if ((training_flag & PI_READ_LEVELING) == PI_READ_LEVELING) { |
| 357 |
for (i = 0; i < rank; i++) { |
| 358 |
select_per_cs_training_index(ch, i); |
| 359 |
/* PI_80 PI_RDLVL_EN:RW:16:2 */ |
| 360 |
mmio_clrsetbits_32(PI_REG(ch, 80), 0x3 << 16, |
| 361 |
0x2 << 16); |
| 362 |
/* PI_74 PI_RDLVL_REQ:WR:8:1,PI_RDLVL_CS:RW:24:2 */ |
| 363 |
mmio_clrsetbits_32(PI_REG(ch, 74), |
| 364 |
(0x1 << 8) | (0x3 << 24), |
| 365 |
(0x1 << 8) | (i << 24)); |
| 366 |
while (1) { |
| 367 |
/* PI_174 PI_INT_STATUS:RD:8:18 */ |
| 368 |
tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| 369 |
|
| 370 |
/* |
| 371 |
* make sure status obs not report error bit |
| 372 |
* PHY_46/174/302/430 |
| 373 |
* phy_rdlvl_status_obs_X:16:8 |
| 374 |
*/ |
| 375 |
if ((((tmp >> 8) & 0x1) == 0x1) && |
| 376 |
(((tmp >> 13) & 0x1) == 0x1) && |
| 377 |
(((tmp >> 2) & 0x1) == 0x0)) |
| 378 |
break; |
| 379 |
else if (((tmp >> 2) & 0x1) == 0x1) |
| 380 |
return -1; |
| 381 |
} |
| 382 |
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| 383 |
mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| 384 |
} |
| 385 |
mmio_clrbits_32(PI_REG(ch, 80), 0x3 << 16); |
| 386 |
} |
| 387 |
|
| 388 |
/* wdq leveling(LPDDR4 support) */ |
| 389 |
if ((training_flag & PI_WDQ_LEVELING) == PI_WDQ_LEVELING) { |
| 390 |
for (i = 0; i < 4; i++) { |
| 391 |
if (!(rank_mask & (1 << i))) |
| 392 |
continue; |
| 393 |
|
| 394 |
select_per_cs_training_index(ch, i); |
| 395 |
/* |
| 396 |
* disable PI_WDQLVL_VREF_EN before wdq leveling? |
| 397 |
* PI_181 PI_WDQLVL_VREF_EN:RW:8:1 |
| 398 |
*/ |
| 399 |
mmio_clrbits_32(PI_REG(ch, 181), 0x1 << 8); |
| 400 |
/* PI_124 PI_WDQLVL_EN:RW:16:2 */ |
| 401 |
mmio_clrsetbits_32(PI_REG(ch, 124), 0x3 << 16, |
| 402 |
0x2 << 16); |
| 403 |
/* PI_121 PI_WDQLVL_REQ:WR:8:1,PI_WDQLVL_CS:RW:16:2 */ |
| 404 |
mmio_clrsetbits_32(PI_REG(ch, 121), |
| 405 |
(0x1 << 8) | (0x3 << 16), |
| 406 |
(0x1 << 8) | (i << 16)); |
| 407 |
while (1) { |
| 408 |
/* PI_174 PI_INT_STATUS:RD:8:18 */ |
| 409 |
tmp = mmio_read_32(PI_REG(ch, 174)) >> 8; |
| 410 |
if ((((tmp >> 12) & 0x1) == 0x1) && |
| 411 |
(((tmp >> 13) & 0x1) == 0x1) && |
| 412 |
(((tmp >> 6) & 0x1) == 0x0)) |
| 413 |
break; |
| 414 |
else if (((tmp >> 6) & 0x1) == 0x1) |
| 415 |
return -1; |
| 416 |
} |
| 417 |
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| 418 |
mmio_write_32(PI_REG(ch, 175), 0x00003f7c); |
| 419 |
} |
| 420 |
mmio_clrbits_32(PI_REG(ch, 124), 0x3 << 16); |
| 421 |
} |
| 422 |
|
| 423 |
/* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ |
| 424 |
mmio_clrbits_32(PHY_REG(ch, 927), (1 << 22)); |
| 425 |
|
| 426 |
return 0; |
| 427 |
} |
| 428 |
|
| 429 |
static __pmusramfunc void set_ddrconfig( |
| 430 |
struct rk3399_sdram_params *sdram_params, |
| 431 |
unsigned char channel, uint32_t ddrconfig) |
| 432 |
{ |
| 433 |
/* only need to set ddrconfig */ |
| 434 |
struct rk3399_sdram_channel *ch = &sdram_params->ch[channel]; |
| 435 |
unsigned int cs0_cap = 0; |
| 436 |
unsigned int cs1_cap = 0; |
| 437 |
|
| 438 |
cs0_cap = (1 << (ch->cs0_row + ch->col + ch->bk + ch->bw - 20)); |
| 439 |
if (ch->rank > 1) |
| 440 |
cs1_cap = cs0_cap >> (ch->cs0_row - ch->cs1_row); |
| 441 |
if (ch->row_3_4) { |
| 442 |
cs0_cap = cs0_cap * 3 / 4; |
| 443 |
cs1_cap = cs1_cap * 3 / 4; |
| 444 |
} |
| 445 |
|
| 446 |
mmio_write_32(MSCH_BASE(channel) + MSCH_DEVICECONF, |
| 447 |
ddrconfig | (ddrconfig << 6)); |
| 448 |
mmio_write_32(MSCH_BASE(channel) + MSCH_DEVICESIZE, |
| 449 |
((cs0_cap / 32) & 0xff) | (((cs1_cap / 32) & 0xff) << 8)); |
| 450 |
} |
| 451 |
|
| 452 |
static __pmusramfunc void dram_all_config( |
| 453 |
struct rk3399_sdram_params *sdram_params) |
| 454 |
{ |
| 455 |
unsigned int i; |
| 456 |
|
| 457 |
for (i = 0; i < 2; i++) { |
| 458 |
struct rk3399_sdram_channel *info = &sdram_params->ch[i]; |
| 459 |
struct rk3399_msch_timings *noc = &info->noc_timings; |
| 460 |
|
| 461 |
if (sdram_params->ch[i].col == 0) |
| 462 |
continue; |
| 463 |
|
| 464 |
mmio_write_32(MSCH_BASE(i) + MSCH_DDRTIMINGA0, |
| 465 |
noc->ddrtiminga0.d32); |
| 466 |
mmio_write_32(MSCH_BASE(i) + MSCH_DDRTIMINGB0, |
| 467 |
noc->ddrtimingb0.d32); |
| 468 |
mmio_write_32(MSCH_BASE(i) + MSCH_DDRTIMINGC0, |
| 469 |
noc->ddrtimingc0.d32); |
| 470 |
mmio_write_32(MSCH_BASE(i) + MSCH_DEVTODEV0, |
| 471 |
noc->devtodev0.d32); |
| 472 |
mmio_write_32(MSCH_BASE(i) + MSCH_DDRMODE, noc->ddrmode.d32); |
| 473 |
|
| 474 |
/* rank 1 memory clock disable (dfi_dram_clk_disable = 1) */ |
| 475 |
if (sdram_params->ch[i].rank == 1) |
| 476 |
mmio_setbits_32(CTL_REG(i, 276), 1 << 17); |
| 477 |
} |
| 478 |
|
| 479 |
DDR_STRIDE(sdram_params->stride); |
| 480 |
|
| 481 |
/* reboot hold register set */ |
| 482 |
mmio_write_32(PMUCRU_BASE + CRU_PMU_RSTHOLD_CON(1), |
| 483 |
CRU_PMU_SGRF_RST_RLS | |
| 484 |
PRESET_GPIO0_HOLD(1) | |
| 485 |
PRESET_GPIO1_HOLD(1)); |
| 486 |
mmio_clrsetbits_32(CRU_BASE + CRU_GLB_RST_CON, 0x3, 0x3); |
| 487 |
} |
| 488 |
|
| 489 |
static __pmusramfunc void pctl_cfg(uint32_t ch, |
| 490 |
struct rk3399_sdram_params *sdram_params) |
| 491 |
{ |
| 492 |
const uint32_t *params_ctl = sdram_params->pctl_regs.denali_ctl; |
| 493 |
const uint32_t *params_pi = sdram_params->pi_regs.denali_pi; |
| 494 |
const struct rk3399_ddr_publ_regs *phy_regs = &sdram_params->phy_regs; |
| 495 |
uint32_t tmp, tmp1, tmp2, i; |
| 496 |
|
| 497 |
/* |
| 498 |
* Workaround controller bug: |
| 499 |
* Do not program DRAM_CLASS until NO_PHY_IND_TRAIN_INT is programmed |
| 500 |
*/ |
| 501 |
sram_regcpy(CTL_REG(ch, 1), (uintptr_t)¶ms_ctl[1], |
| 502 |
CTL_REG_NUM - 1); |
| 503 |
mmio_write_32(CTL_REG(ch, 0), params_ctl[0]); |
| 504 |
sram_regcpy(PI_REG(ch, 0), (uintptr_t)¶ms_pi[0], |
| 505 |
PI_REG_NUM); |
| 506 |
|
| 507 |
sram_regcpy(PHY_REG(ch, 910), (uintptr_t)&phy_regs->phy896[910 - 896], |
| 508 |
3); |
| 509 |
|
| 510 |
mmio_clrsetbits_32(CTL_REG(ch, 68), PWRUP_SREFRESH_EXIT, |
| 511 |
PWRUP_SREFRESH_EXIT); |
| 512 |
|
| 513 |
/* PHY_DLL_RST_EN */ |
| 514 |
mmio_clrsetbits_32(PHY_REG(ch, 957), 0x3 << 24, 1 << 24); |
| 515 |
dmbst(); |
| 516 |
|
| 517 |
mmio_setbits_32(PI_REG(ch, 0), START); |
| 518 |
mmio_setbits_32(CTL_REG(ch, 0), START); |
| 519 |
|
| 520 |
/* wait lock */ |
| 521 |
while (1) { |
| 522 |
tmp = mmio_read_32(PHY_REG(ch, 920)); |
| 523 |
tmp1 = mmio_read_32(PHY_REG(ch, 921)); |
| 524 |
tmp2 = mmio_read_32(PHY_REG(ch, 922)); |
| 525 |
if ((((tmp >> 16) & 0x1) == 0x1) && |
| 526 |
(((tmp1 >> 16) & 0x1) == 0x1) && |
| 527 |
(((tmp1 >> 0) & 0x1) == 0x1) && |
| 528 |
(((tmp2 >> 0) & 0x1) == 0x1)) |
| 529 |
break; |
| 530 |
/* if PLL bypass,don't need wait lock */ |
| 531 |
if (mmio_read_32(PHY_REG(ch, 911)) & 0x1) |
| 532 |
break; |
| 533 |
} |
| 534 |
|
| 535 |
sram_regcpy(PHY_REG(ch, 896), (uintptr_t)&phy_regs->phy896[0], 63); |
| 536 |
|
| 537 |
for (i = 0; i < 4; i++) |
| 538 |
sram_regcpy(PHY_REG(ch, 128 * i), |
| 539 |
(uintptr_t)&phy_regs->phy0[0], 91); |
| 540 |
|
| 541 |
for (i = 0; i < 3; i++) |
| 542 |
sram_regcpy(PHY_REG(ch, 512 + 128 * i), |
| 543 |
(uintptr_t)&phy_regs->phy512[i][0], 38); |
| 544 |
} |
| 545 |
|
| 546 |
static __pmusramfunc int dram_switch_to_next_index( |
| 547 |
struct rk3399_sdram_params *sdram_params) |
| 548 |
{ |
| 549 |
uint32_t ch, ch_count; |
| 550 |
uint32_t fn = ((mmio_read_32(CTL_REG(0, 111)) >> 16) + 1) & 0x1; |
| 551 |
|
| 552 |
mmio_write_32(CIC_BASE + CIC_CTRL0, |
| 553 |
(((0x3 << 4) | (1 << 2) | 1) << 16) | |
| 554 |
(fn << 4) | (1 << 2) | 1); |
| 555 |
while (!(mmio_read_32(CIC_BASE + CIC_STATUS0) & (1 << 2))) |
| 556 |
; |
| 557 |
|
| 558 |
mmio_write_32(CIC_BASE + CIC_CTRL0, 0x20002); |
| 559 |
while (!(mmio_read_32(CIC_BASE + CIC_STATUS0) & (1 << 0))) |
| 560 |
; |
| 561 |
|
| 562 |
ch_count = sdram_params->num_channels; |
| 563 |
|
| 564 |
/* LPDDR4 f2 can't do training, all training will fail */ |
| 565 |
for (ch = 0; ch < ch_count; ch++) { |
| 566 |
/* |
| 567 |
* Without this disabled for LPDDR4 we end up writing 0's |
| 568 |
* in place of real data in an interesting pattern. |
| 569 |
*/ |
| 570 |
if (sdram_params->dramtype != LPDDR4) { |
| 571 |
mmio_clrsetbits_32(PHY_REG(ch, 896), (0x3 << 8) | 1, |
| 572 |
fn << 8); |
| 573 |
} |
| 574 |
|
| 575 |
/* data_training failed */ |
| 576 |
if (data_training(ch, sdram_params, PI_FULL_TRAINING)) |
| 577 |
return -1; |
| 578 |
} |
| 579 |
|
| 580 |
return 0; |
| 581 |
} |
| 582 |
|
| 583 |
/* |
| 584 |
* Needs to be done for both channels at once in case of a shared reset signal |
| 585 |
* between channels. |
| 586 |
*/ |
| 587 |
static __pmusramfunc int pctl_start(uint32_t channel_mask, |
| 588 |
struct rk3399_sdram_params *sdram_params) |
| 589 |
{ |
| 590 |
uint32_t count; |
| 591 |
uint32_t byte; |
| 592 |
|
| 593 |
mmio_setbits_32(CTL_REG(0, 68), PWRUP_SREFRESH_EXIT); |
| 594 |
mmio_setbits_32(CTL_REG(1, 68), PWRUP_SREFRESH_EXIT); |
| 595 |
|
| 596 |
/* need de-access IO retention before controller START */ |
| 597 |
if (channel_mask & (1 << 0)) |
| 598 |
mmio_setbits_32(PMU_BASE + PMU_PWRMODE_CON, (1 << 19)); |
| 599 |
if (channel_mask & (1 << 1)) |
| 600 |
mmio_setbits_32(PMU_BASE + PMU_PWRMODE_CON, (1 << 23)); |
| 601 |
|
| 602 |
/* PHY_DLL_RST_EN */ |
| 603 |
if (channel_mask & (1 << 0)) |
| 604 |
mmio_clrsetbits_32(PHY_REG(0, 957), 0x3 << 24, |
| 605 |
0x2 << 24); |
| 606 |
if (channel_mask & (1 << 1)) |
| 607 |
mmio_clrsetbits_32(PHY_REG(1, 957), 0x3 << 24, |
| 608 |
0x2 << 24); |
| 609 |
|
| 610 |
/* check ERROR bit */ |
| 611 |
if (channel_mask & (1 << 0)) { |
| 612 |
count = 0; |
| 613 |
while (!(mmio_read_32(CTL_REG(0, 203)) & (1 << 3))) { |
| 614 |
/* CKE is low, loop 10ms */ |
| 615 |
if (count > 100) |
| 616 |
return -1; |
| 617 |
|
| 618 |
sram_udelay(100); |
| 619 |
count++; |
| 620 |
} |
| 621 |
|
| 622 |
mmio_clrbits_32(CTL_REG(0, 68), PWRUP_SREFRESH_EXIT); |
| 623 |
|
| 624 |
/* Restore the PHY_RX_CAL_DQS value */ |
| 625 |
for (byte = 0; byte < 4; byte++) |
| 626 |
mmio_clrsetbits_32(PHY_REG(0, 57 + 128 * byte), |
| 627 |
0xfff << 16, |
| 628 |
sdram_params->rx_cal_dqs[0][byte]); |
| 629 |
} |
| 630 |
if (channel_mask & (1 << 1)) { |
| 631 |
count = 0; |
| 632 |
while (!(mmio_read_32(CTL_REG(1, 203)) & (1 << 3))) { |
| 633 |
/* CKE is low, loop 10ms */ |
| 634 |
if (count > 100) |
| 635 |
return -1; |
| 636 |
|
| 637 |
sram_udelay(100); |
| 638 |
count++; |
| 639 |
} |
| 640 |
|
| 641 |
mmio_clrbits_32(CTL_REG(1, 68), PWRUP_SREFRESH_EXIT); |
| 642 |
|
| 643 |
/* Restore the PHY_RX_CAL_DQS value */ |
| 644 |
for (byte = 0; byte < 4; byte++) |
| 645 |
mmio_clrsetbits_32(PHY_REG(1, 57 + 128 * byte), |
| 646 |
0xfff << 16, |
| 647 |
sdram_params->rx_cal_dqs[1][byte]); |
| 648 |
} |
| 649 |
|
| 650 |
return 0; |
| 651 |
} |
| 652 |
|
| 653 |
__pmusramfunc static void pmusram_restore_pll(int pll_id, uint32_t *src) |
| 654 |
{ |
| 655 |
mmio_write_32((CRU_BASE + CRU_PLL_CON(pll_id, 3)), PLL_SLOW_MODE); |
| 656 |
|
| 657 |
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 0), src[0] | REG_SOC_WMSK); |
| 658 |
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 1), src[1] | REG_SOC_WMSK); |
| 659 |
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 2), src[2]); |
| 660 |
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 4), src[4] | REG_SOC_WMSK); |
| 661 |
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 5), src[5] | REG_SOC_WMSK); |
| 662 |
|
| 663 |
mmio_write_32(CRU_BASE + CRU_PLL_CON(pll_id, 3), src[3] | REG_SOC_WMSK); |
| 664 |
|
| 665 |
while ((mmio_read_32(CRU_BASE + CRU_PLL_CON(pll_id, 2)) & |
| 666 |
(1U << 31)) == 0x0) |
| 667 |
; |
| 668 |
} |
| 669 |
|
| 670 |
__pmusramfunc static void pmusram_enable_watchdog(void) |
| 671 |
{ |
| 672 |
/* Make the watchdog use the first global reset. */ |
| 673 |
mmio_write_32(CRU_BASE + CRU_GLB_RST_CON, 1 << 1); |
| 674 |
|
| 675 |
/* |
| 676 |
* This gives the system ~8 seconds before reset. The pclk for the |
| 677 |
* watchdog is 4MHz on reset. The value of 0x9 in WDT_TORR means that |
| 678 |
* the watchdog will wait for 0x1ffffff cycles before resetting. |
| 679 |
*/ |
| 680 |
mmio_write_32(WDT0_BASE + 4, 0x9); |
| 681 |
|
| 682 |
/* Enable the watchdog */ |
| 683 |
mmio_setbits_32(WDT0_BASE, 0x1); |
| 684 |
|
| 685 |
/* Magic reset the watchdog timer value for WDT_CRR. */ |
| 686 |
mmio_write_32(WDT0_BASE + 0xc, 0x76); |
| 687 |
|
| 688 |
secure_watchdog_ungate(); |
| 689 |
|
| 690 |
/* The watchdog is in PD_ALIVE, so deidle it. */ |
| 691 |
mmio_clrbits_32(PMU_BASE + PMU_BUS_CLR, PMU_CLR_ALIVE); |
| 692 |
} |
| 693 |
|
| 694 |
void dmc_suspend(void) |
| 695 |
{ |
| 696 |
struct rk3399_sdram_params *sdram_params = &sdram_config; |
| 697 |
struct rk3399_ddr_publ_regs *phy_regs; |
| 698 |
uint32_t *params_ctl; |
| 699 |
uint32_t *params_pi; |
| 700 |
uint32_t refdiv, postdiv2, postdiv1, fbdiv; |
| 701 |
uint32_t ch, byte, i; |
| 702 |
|
| 703 |
phy_regs = &sdram_params->phy_regs; |
| 704 |
params_ctl = sdram_params->pctl_regs.denali_ctl; |
| 705 |
params_pi = sdram_params->pi_regs.denali_pi; |
| 706 |
|
| 707 |
/* save dpll register and ddr clock register value to pmusram */ |
| 708 |
cru_clksel_con6 = mmio_read_32(CRU_BASE + CRU_CLKSEL_CON6); |
| 709 |
for (i = 0; i < PLL_CON_COUNT; i++) |
| 710 |
dpll_data[i] = mmio_read_32(CRU_BASE + CRU_PLL_CON(DPLL_ID, i)); |
| 711 |
|
| 712 |
fbdiv = dpll_data[0] & 0xfff; |
| 713 |
postdiv2 = POSTDIV2_DEC(dpll_data[1]); |
| 714 |
postdiv1 = POSTDIV1_DEC(dpll_data[1]); |
| 715 |
refdiv = REFDIV_DEC(dpll_data[1]); |
| 716 |
|
| 717 |
sdram_params->ddr_freq = ((fbdiv * 24) / |
| 718 |
(refdiv * postdiv1 * postdiv2)) * MHz; |
| 719 |
|
| 720 |
INFO("sdram_params->ddr_freq = %d\n", sdram_params->ddr_freq); |
| 721 |
sdram_params->odt = (((mmio_read_32(PHY_REG(0, 5)) >> 16) & |
| 722 |
0x7) != 0) ? 1 : 0; |
| 723 |
|
| 724 |
/* copy the registers CTL PI and PHY */ |
| 725 |
dram_regcpy((uintptr_t)¶ms_ctl[0], CTL_REG(0, 0), CTL_REG_NUM); |
| 726 |
|
| 727 |
/* mask DENALI_CTL_00_DATA.START, only copy here, will trigger later */ |
| 728 |
params_ctl[0] &= ~(0x1 << 0); |
| 729 |
|
| 730 |
dram_regcpy((uintptr_t)¶ms_pi[0], PI_REG(0, 0), |
| 731 |
PI_REG_NUM); |
| 732 |
|
| 733 |
/* mask DENALI_PI_00_DATA.START, only copy here, will trigger later*/ |
| 734 |
params_pi[0] &= ~(0x1 << 0); |
| 735 |
|
| 736 |
dram_regcpy((uintptr_t)&phy_regs->phy0[0], |
| 737 |
PHY_REG(0, 0), 91); |
| 738 |
|
| 739 |
for (i = 0; i < 3; i++) |
| 740 |
dram_regcpy((uintptr_t)&phy_regs->phy512[i][0], |
| 741 |
PHY_REG(0, 512 + 128 * i), 38); |
| 742 |
|
| 743 |
dram_regcpy((uintptr_t)&phy_regs->phy896[0], PHY_REG(0, 896), 63); |
| 744 |
|
| 745 |
for (ch = 0; ch < sdram_params->num_channels; ch++) { |
| 746 |
for (byte = 0; byte < 4; byte++) |
| 747 |
sdram_params->rx_cal_dqs[ch][byte] = (0xfff << 16) & |
| 748 |
mmio_read_32(PHY_REG(ch, 57 + byte * 128)); |
| 749 |
} |
| 750 |
|
| 751 |
/* set DENALI_PHY_957_DATA.PHY_DLL_RST_EN = 0x1 */ |
| 752 |
phy_regs->phy896[957 - 896] &= ~(0x3 << 24); |
| 753 |
phy_regs->phy896[957 - 896] |= 1 << 24; |
| 754 |
phy_regs->phy896[0] |= 1; |
| 755 |
phy_regs->phy896[0] &= ~(0x3 << 8); |
| 756 |
} |
| 757 |
|
| 758 |
__pmusramfunc void phy_dll_bypass_set(uint32_t ch, uint32_t freq) |
| 759 |
{ |
| 760 |
if (freq <= (125 * 1000 * 1000)) { |
| 761 |
/* Set master mode to SW for slices*/ |
| 762 |
mmio_setbits_32(PHY_REG(ch, 86), 3 << 10); |
| 763 |
mmio_setbits_32(PHY_REG(ch, 214), 3 << 10); |
| 764 |
mmio_setbits_32(PHY_REG(ch, 342), 3 << 10); |
| 765 |
mmio_setbits_32(PHY_REG(ch, 470), 3 << 10); |
| 766 |
/* Set master mode to SW for address slices*/ |
| 767 |
mmio_setbits_32(PHY_REG(ch, 547), 3 << 18); |
| 768 |
mmio_setbits_32(PHY_REG(ch, 675), 3 << 18); |
| 769 |
mmio_setbits_32(PHY_REG(ch, 803), 3 << 18); |
| 770 |
} else { |
| 771 |
/* Clear SW master mode for slices*/ |
| 772 |
mmio_clrbits_32(PHY_REG(ch, 86), 3 << 10); |
| 773 |
mmio_clrbits_32(PHY_REG(ch, 214), 3 << 10); |
| 774 |
mmio_clrbits_32(PHY_REG(ch, 342), 3 << 10); |
| 775 |
mmio_clrbits_32(PHY_REG(ch, 470), 3 << 10); |
| 776 |
/* Clear SW master mode for address slices*/ |
| 777 |
mmio_clrbits_32(PHY_REG(ch, 547), 3 << 18); |
| 778 |
mmio_clrbits_32(PHY_REG(ch, 675), 3 << 18); |
| 779 |
mmio_clrbits_32(PHY_REG(ch, 803), 3 << 18); |
| 780 |
} |
| 781 |
} |
| 782 |
|
| 783 |
__pmusramfunc void dmc_resume(void) |
| 784 |
{ |
| 785 |
struct rk3399_sdram_params *sdram_params = &sdram_config; |
| 786 |
uint32_t channel_mask = 0; |
| 787 |
uint32_t channel; |
| 788 |
|
| 789 |
/* |
| 790 |
* We can't turn off the watchdog, so if we have not turned it on before |
| 791 |
* we should not turn it on here. |
| 792 |
*/ |
| 793 |
if ((pmu_enable_watchdog0 & 0x1) == 0x1) { |
| 794 |
pmusram_enable_watchdog(); |
| 795 |
} |
| 796 |
pmu_sgrf_rst_hld_release(); |
| 797 |
restore_pmu_rsthold(); |
| 798 |
sram_secure_timer_init(); |
| 799 |
|
| 800 |
/* |
| 801 |
* we switch ddr clock to abpll when suspend, |
| 802 |
* we set back to dpll here |
| 803 |
*/ |
| 804 |
mmio_write_32(CRU_BASE + CRU_CLKSEL_CON6, |
| 805 |
cru_clksel_con6 | REG_SOC_WMSK); |
| 806 |
pmusram_restore_pll(DPLL_ID, dpll_data); |
| 807 |
|
| 808 |
configure_sgrf(); |
| 809 |
|
| 810 |
retry: |
| 811 |
for (channel = 0; channel < sdram_params->num_channels; channel++) { |
| 812 |
phy_pctrl_reset(channel); |
| 813 |
/* |
| 814 |
* Without this, LPDDR4 will write 0's in place of real data |
| 815 |
* in a strange pattern. |
| 816 |
*/ |
| 817 |
if (sdram_params->dramtype == LPDDR4) { |
| 818 |
phy_dll_bypass_set(channel, sdram_params->ddr_freq); |
| 819 |
} |
| 820 |
pctl_cfg(channel, sdram_params); |
| 821 |
} |
| 822 |
|
| 823 |
for (channel = 0; channel < 2; channel++) { |
| 824 |
if (sdram_params->ch[channel].col) |
| 825 |
channel_mask |= 1 << channel; |
| 826 |
} |
| 827 |
|
| 828 |
if (pctl_start(channel_mask, sdram_params) < 0) |
| 829 |
goto retry; |
| 830 |
|
| 831 |
for (channel = 0; channel < sdram_params->num_channels; channel++) { |
| 832 |
/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */ |
| 833 |
if (sdram_params->dramtype == LPDDR3) |
| 834 |
sram_udelay(10); |
| 835 |
|
| 836 |
/* |
| 837 |
* Training here will always fail for LPDDR4, so skip it |
| 838 |
* If traning fail, retry to do it again. |
| 839 |
*/ |
| 840 |
if (sdram_params->dramtype != LPDDR4 && |
| 841 |
data_training(channel, sdram_params, PI_FULL_TRAINING)) |
| 842 |
goto retry; |
| 843 |
|
| 844 |
set_ddrconfig(sdram_params, channel, |
| 845 |
sdram_params->ch[channel].ddrconfig); |
| 846 |
} |
| 847 |
|
| 848 |
dram_all_config(sdram_params); |
| 849 |
|
| 850 |
/* Switch to index 1 and prepare for DDR frequency switch. */ |
| 851 |
dram_switch_to_next_index(sdram_params); |
| 852 |
} |