| 1 |
/* |
| 2 |
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#ifndef DRAM_SPEC_TIMING_H |
| 8 |
#define DRAM_SPEC_TIMING_H |
| 9 |
|
| 10 |
#include <stdint.h> |
| 11 |
|
| 12 |
enum ddr3_speed_rate { |
| 13 |
/* 5-5-5 */ |
| 14 |
DDR3_800D = 0, |
| 15 |
/* 6-6-6 */ |
| 16 |
DDR3_800E = 1, |
| 17 |
/* 6-6-6 */ |
| 18 |
DDR3_1066E = 2, |
| 19 |
/* 7-7-7 */ |
| 20 |
DDR3_1066F = 3, |
| 21 |
/* 8-8-8 */ |
| 22 |
DDR3_1066G = 4, |
| 23 |
/* 7-7-7 */ |
| 24 |
DDR3_1333F = 5, |
| 25 |
/* 8-8-8 */ |
| 26 |
DDR3_1333G = 6, |
| 27 |
/* 9-9-9 */ |
| 28 |
DDR3_1333H = 7, |
| 29 |
/* 10-10-10 */ |
| 30 |
DDR3_1333J = 8, |
| 31 |
/* 8-8-8 */ |
| 32 |
DDR3_1600G = 9, |
| 33 |
/* 9-9-9 */ |
| 34 |
DDR3_1600H = 10, |
| 35 |
/* 10-10-10 */ |
| 36 |
DDR3_1600J = 11, |
| 37 |
/* 11-11-11 */ |
| 38 |
DDR3_1600K = 12, |
| 39 |
/* 10-10-10 */ |
| 40 |
DDR3_1866J = 13, |
| 41 |
/* 11-11-11 */ |
| 42 |
DDR3_1866K = 14, |
| 43 |
/* 12-12-12 */ |
| 44 |
DDR3_1866L = 15, |
| 45 |
/* 13-13-13 */ |
| 46 |
DDR3_1866M = 16, |
| 47 |
/* 11-11-11 */ |
| 48 |
DDR3_2133K = 17, |
| 49 |
/* 12-12-12 */ |
| 50 |
DDR3_2133L = 18, |
| 51 |
/* 13-13-13 */ |
| 52 |
DDR3_2133M = 19, |
| 53 |
/* 14-14-14 */ |
| 54 |
DDR3_2133N = 20, |
| 55 |
DDR3_DEFAULT = 21, |
| 56 |
}; |
| 57 |
|
| 58 |
#define max(a, b) (((a) > (b)) ? (a) : (b)) |
| 59 |
#define range(mi, val, ma) (((ma) > (val)) ? (max(mi, val)) : (ma)) |
| 60 |
|
| 61 |
struct dram_timing_t { |
| 62 |
/* unit MHz */ |
| 63 |
uint32_t mhz; |
| 64 |
/* some timing unit is us */ |
| 65 |
uint32_t tinit1; |
| 66 |
uint32_t tinit2; |
| 67 |
uint32_t tinit3; |
| 68 |
uint32_t tinit4; |
| 69 |
uint32_t tinit5; |
| 70 |
/* reset low, DDR3:200us */ |
| 71 |
uint32_t trstl; |
| 72 |
/* reset high to CKE high, DDR3:500us */ |
| 73 |
uint32_t trsth; |
| 74 |
uint32_t trefi; |
| 75 |
/* base */ |
| 76 |
uint32_t trcd; |
| 77 |
/* trp per bank */ |
| 78 |
uint32_t trppb; |
| 79 |
/* trp all bank */ |
| 80 |
uint32_t trp; |
| 81 |
uint32_t twr; |
| 82 |
uint32_t tdal; |
| 83 |
uint32_t trtp; |
| 84 |
uint32_t trc; |
| 85 |
uint32_t trrd; |
| 86 |
uint32_t tccd; |
| 87 |
uint32_t twtr; |
| 88 |
uint32_t trtw; |
| 89 |
uint32_t tras_max; |
| 90 |
uint32_t tras_min; |
| 91 |
uint32_t tfaw; |
| 92 |
uint32_t trfc; |
| 93 |
uint32_t tdqsck; |
| 94 |
uint32_t tdqsck_max; |
| 95 |
/* pd or sr */ |
| 96 |
uint32_t txsr; |
| 97 |
uint32_t txsnr; |
| 98 |
uint32_t txp; |
| 99 |
uint32_t txpdll; |
| 100 |
uint32_t tdllk; |
| 101 |
uint32_t tcke; |
| 102 |
uint32_t tckesr; |
| 103 |
uint32_t tcksre; |
| 104 |
uint32_t tcksrx; |
| 105 |
uint32_t tdpd; |
| 106 |
/* mode register timing */ |
| 107 |
uint32_t tmod; |
| 108 |
uint32_t tmrd; |
| 109 |
uint32_t tmrr; |
| 110 |
uint32_t tmrri; |
| 111 |
/* ODT */ |
| 112 |
uint32_t todton; |
| 113 |
/* ZQ */ |
| 114 |
uint32_t tzqinit; |
| 115 |
uint32_t tzqcs; |
| 116 |
uint32_t tzqoper; |
| 117 |
uint32_t tzqreset; |
| 118 |
/* Write Leveling */ |
| 119 |
uint32_t twlmrd; |
| 120 |
uint32_t twlo; |
| 121 |
uint32_t twldqsen; |
| 122 |
/* CA Training */ |
| 123 |
uint32_t tcackel; |
| 124 |
uint32_t tcaent; |
| 125 |
uint32_t tcamrd; |
| 126 |
uint32_t tcackeh; |
| 127 |
uint32_t tcaext; |
| 128 |
uint32_t tadr; |
| 129 |
uint32_t tmrz; |
| 130 |
uint32_t tcacd; |
| 131 |
/* mode register */ |
| 132 |
uint32_t mr[4]; |
| 133 |
uint32_t mr11; |
| 134 |
/* lpddr4 spec */ |
| 135 |
uint32_t mr12; |
| 136 |
uint32_t mr13; |
| 137 |
uint32_t mr14; |
| 138 |
uint32_t mr16; |
| 139 |
uint32_t mr17; |
| 140 |
uint32_t mr20; |
| 141 |
uint32_t mr22; |
| 142 |
uint32_t tccdmw; |
| 143 |
uint32_t tppd; |
| 144 |
uint32_t tescke; |
| 145 |
uint32_t tsr; |
| 146 |
uint32_t tcmdcke; |
| 147 |
uint32_t tcscke; |
| 148 |
uint32_t tckelcs; |
| 149 |
uint32_t tcsckeh; |
| 150 |
uint32_t tckehcs; |
| 151 |
uint32_t tmrwckel; |
| 152 |
uint32_t tzqcal; |
| 153 |
uint32_t tzqlat; |
| 154 |
uint32_t tzqcke; |
| 155 |
uint32_t tvref_long; |
| 156 |
uint32_t tvref_short; |
| 157 |
uint32_t tvrcg_enable; |
| 158 |
uint32_t tvrcg_disable; |
| 159 |
uint32_t tfc_long; |
| 160 |
uint32_t tckfspe; |
| 161 |
uint32_t tckfspx; |
| 162 |
uint32_t tckehcmd; |
| 163 |
uint32_t tckelcmd; |
| 164 |
uint32_t tckelpd; |
| 165 |
uint32_t tckckel; |
| 166 |
/* other */ |
| 167 |
uint32_t al; |
| 168 |
uint32_t cl; |
| 169 |
uint32_t cwl; |
| 170 |
uint32_t bl; |
| 171 |
}; |
| 172 |
|
| 173 |
struct dram_info_t { |
| 174 |
/* speed_rate only used when DDR3 */ |
| 175 |
enum ddr3_speed_rate speed_rate; |
| 176 |
/* 1: use CS0, 2: use CS0 and CS1 */ |
| 177 |
uint32_t cs_cnt; |
| 178 |
/* give the max per-die capability on each rank/cs */ |
| 179 |
uint32_t per_die_capability[2]; |
| 180 |
}; |
| 181 |
|
| 182 |
struct timing_related_config { |
| 183 |
struct dram_info_t dram_info[2]; |
| 184 |
uint32_t dram_type; |
| 185 |
/* MHz */ |
| 186 |
uint32_t freq; |
| 187 |
uint32_t ch_cnt; |
| 188 |
uint32_t bl; |
| 189 |
/* 1:auto precharge, 0:never auto precharge */ |
| 190 |
uint32_t ap; |
| 191 |
/* |
| 192 |
* 1:dll bypass, 0:dll normal |
| 193 |
* dram and controller dll bypass at the same time |
| 194 |
*/ |
| 195 |
uint32_t dllbp; |
| 196 |
/* 1:odt enable, 0:odt disable */ |
| 197 |
uint32_t odt; |
| 198 |
/* 1:enable, 0:disabe */ |
| 199 |
uint32_t rdbi; |
| 200 |
uint32_t wdbi; |
| 201 |
/* dram driver strength */ |
| 202 |
uint32_t dramds; |
| 203 |
/* dram ODT, if odt=0, this parameter invalid */ |
| 204 |
uint32_t dramodt; |
| 205 |
/* |
| 206 |
* ca ODT, if odt=0, this parameter invalid |
| 207 |
* it only used by LPDDR4 |
| 208 |
*/ |
| 209 |
uint32_t caodt; |
| 210 |
}; |
| 211 |
|
| 212 |
/* mr0 for ddr3 */ |
| 213 |
#define DDR3_BL8 (0) |
| 214 |
#define DDR3_BC4_8 (1) |
| 215 |
#define DDR3_BC4 (2) |
| 216 |
#define DDR3_CL(n) (((((n) - 4) & 0x7) << 4)\ |
| 217 |
| ((((n) - 4) & 0x8) >> 1)) |
| 218 |
#define DDR3_WR(n) (((n) & 0x7) << 9) |
| 219 |
#define DDR3_DLL_RESET (1 << 8) |
| 220 |
#define DDR3_DLL_DERESET (0 << 8) |
| 221 |
|
| 222 |
/* mr1 for ddr3 */ |
| 223 |
#define DDR3_DLL_ENABLE (0) |
| 224 |
#define DDR3_DLL_DISABLE (1) |
| 225 |
#define DDR3_MR1_AL(n) (((n) & 0x3) << 3) |
| 226 |
|
| 227 |
#define DDR3_DS_40 (0) |
| 228 |
#define DDR3_DS_34 (1 << 1) |
| 229 |
#define DDR3_RTT_NOM_DIS (0) |
| 230 |
#define DDR3_RTT_NOM_60 (1 << 2) |
| 231 |
#define DDR3_RTT_NOM_120 (1 << 6) |
| 232 |
#define DDR3_RTT_NOM_40 ((1 << 2) | (1 << 6)) |
| 233 |
#define DDR3_TDQS (1 << 11) |
| 234 |
|
| 235 |
/* mr2 for ddr3 */ |
| 236 |
#define DDR3_MR2_CWL(n) ((((n) - 5) & 0x7) << 3) |
| 237 |
#define DDR3_RTT_WR_DIS (0) |
| 238 |
#define DDR3_RTT_WR_60 (1 << 9) |
| 239 |
#define DDR3_RTT_WR_120 (2 << 9) |
| 240 |
|
| 241 |
/* |
| 242 |
* MR0 (Device Information) |
| 243 |
* 0:DAI complete, 1:DAI still in progress |
| 244 |
*/ |
| 245 |
#define LPDDR2_DAI (0x1) |
| 246 |
/* 0:S2 or S4 SDRAM, 1:NVM */ |
| 247 |
#define LPDDR2_DI (0x1 << 1) |
| 248 |
/* 0:DNV not supported, 1:DNV supported */ |
| 249 |
#define LPDDR2_DNVI (0x1 << 2) |
| 250 |
#define LPDDR2_RZQI (0x3 << 3) |
| 251 |
|
| 252 |
/* |
| 253 |
* 00:RZQ self test not supported, |
| 254 |
* 01:ZQ-pin may connect to VDDCA or float |
| 255 |
* 10:ZQ-pin may short to GND. |
| 256 |
* 11:ZQ-pin self test completed, no error condition detected. |
| 257 |
*/ |
| 258 |
|
| 259 |
/* MR1 (Device Feature) */ |
| 260 |
#define LPDDR2_BL4 (0x2) |
| 261 |
#define LPDDR2_BL8 (0x3) |
| 262 |
#define LPDDR2_BL16 (0x4) |
| 263 |
#define LPDDR2_N_WR(n) (((n) - 2) << 5) |
| 264 |
|
| 265 |
/* MR2 (Device Feature 2) */ |
| 266 |
#define LPDDR2_RL3_WL1 (0x1) |
| 267 |
#define LPDDR2_RL4_WL2 (0x2) |
| 268 |
#define LPDDR2_RL5_WL2 (0x3) |
| 269 |
#define LPDDR2_RL6_WL3 (0x4) |
| 270 |
#define LPDDR2_RL7_WL4 (0x5) |
| 271 |
#define LPDDR2_RL8_WL4 (0x6) |
| 272 |
|
| 273 |
/* MR3 (IO Configuration 1) */ |
| 274 |
#define LPDDR2_DS_34 (0x1) |
| 275 |
#define LPDDR2_DS_40 (0x2) |
| 276 |
#define LPDDR2_DS_48 (0x3) |
| 277 |
#define LPDDR2_DS_60 (0x4) |
| 278 |
#define LPDDR2_DS_80 (0x6) |
| 279 |
/* optional */ |
| 280 |
#define LPDDR2_DS_120 (0x7) |
| 281 |
|
| 282 |
/* MR4 (Device Temperature) */ |
| 283 |
#define LPDDR2_TREF_MASK (0x7) |
| 284 |
#define LPDDR2_4_TREF (0x1) |
| 285 |
#define LPDDR2_2_TREF (0x2) |
| 286 |
#define LPDDR2_1_TREF (0x3) |
| 287 |
#define LPDDR2_025_TREF (0x5) |
| 288 |
#define LPDDR2_025_TREF_DERATE (0x6) |
| 289 |
|
| 290 |
#define LPDDR2_TUF (0x1 << 7) |
| 291 |
|
| 292 |
/* MR8 (Basic configuration 4) */ |
| 293 |
#define LPDDR2_S4 (0x0) |
| 294 |
#define LPDDR2_S2 (0x1) |
| 295 |
#define LPDDR2_N (0x2) |
| 296 |
/* Unit:MB */ |
| 297 |
#define LPDDR2_DENSITY(mr8) (8 << (((mr8) >> 2) & 0xf)) |
| 298 |
#define LPDDR2_IO_WIDTH(mr8) (32 >> (((mr8) >> 6) & 0x3)) |
| 299 |
|
| 300 |
/* MR10 (Calibration) */ |
| 301 |
#define LPDDR2_ZQINIT (0xff) |
| 302 |
#define LPDDR2_ZQCL (0xab) |
| 303 |
#define LPDDR2_ZQCS (0x56) |
| 304 |
#define LPDDR2_ZQRESET (0xc3) |
| 305 |
|
| 306 |
/* MR16 (PASR Bank Mask), S2 SDRAM Only */ |
| 307 |
#define LPDDR2_PASR_FULL (0x0) |
| 308 |
#define LPDDR2_PASR_1_2 (0x1) |
| 309 |
#define LPDDR2_PASR_1_4 (0x2) |
| 310 |
#define LPDDR2_PASR_1_8 (0x3) |
| 311 |
|
| 312 |
/* |
| 313 |
* MR0 (Device Information) |
| 314 |
* 0:DAI complete, |
| 315 |
* 1:DAI still in progress |
| 316 |
*/ |
| 317 |
#define LPDDR3_DAI (0x1) |
| 318 |
/* |
| 319 |
* 00:RZQ self test not supported, |
| 320 |
* 01:ZQ-pin may connect to VDDCA or float |
| 321 |
* 10:ZQ-pin may short to GND. |
| 322 |
* 11:ZQ-pin self test completed, no error condition detected. |
| 323 |
*/ |
| 324 |
#define LPDDR3_RZQI (0x3 << 3) |
| 325 |
/* |
| 326 |
* 0:DRAM does not support WL(Set B), |
| 327 |
* 1:DRAM support WL(Set B) |
| 328 |
*/ |
| 329 |
#define LPDDR3_WL_SUPOT (1 << 6) |
| 330 |
/* |
| 331 |
* 0:DRAM does not support RL=3,nWR=3,WL=1; |
| 332 |
* 1:DRAM supports RL=3,nWR=3,WL=1 for frequencies <=166 |
| 333 |
*/ |
| 334 |
#define LPDDR3_RL3_SUPOT (1 << 7) |
| 335 |
|
| 336 |
/* MR1 (Device Feature) */ |
| 337 |
#define LPDDR3_BL8 (0x3) |
| 338 |
#define LPDDR3_N_WR(n) ((n) << 5) |
| 339 |
|
| 340 |
/* MR2 (Device Feature 2), WL Set A,default */ |
| 341 |
/* <=166MHz,optional*/ |
| 342 |
#define LPDDR3_RL3_WL1 (0x1) |
| 343 |
/* <=400MHz*/ |
| 344 |
#define LPDDR3_RL6_WL3 (0x4) |
| 345 |
/* <=533MHz*/ |
| 346 |
#define LPDDR3_RL8_WL4 (0x6) |
| 347 |
/* <=600MHz*/ |
| 348 |
#define LPDDR3_RL9_WL5 (0x7) |
| 349 |
/* <=667MHz,default*/ |
| 350 |
#define LPDDR3_RL10_WL6 (0x8) |
| 351 |
/* <=733MHz*/ |
| 352 |
#define LPDDR3_RL11_WL6 (0x9) |
| 353 |
/* <=800MHz*/ |
| 354 |
#define LPDDR3_RL12_WL6 (0xa) |
| 355 |
/* <=933MHz*/ |
| 356 |
#define LPDDR3_RL14_WL8 (0xc) |
| 357 |
/* <=1066MHz*/ |
| 358 |
#define LPDDR3_RL16_WL8 (0xe) |
| 359 |
|
| 360 |
/* WL Set B, optional */ |
| 361 |
/* <=667MHz,default*/ |
| 362 |
#define LPDDR3_RL10_WL8 (0x8) |
| 363 |
/* <=733MHz*/ |
| 364 |
#define LPDDR3_RL11_WL9 (0x9) |
| 365 |
/* <=800MHz*/ |
| 366 |
#define LPDDR3_RL12_WL9 (0xa) |
| 367 |
/* <=933MHz*/ |
| 368 |
#define LPDDR3_RL14_WL11 (0xc) |
| 369 |
/* <=1066MHz*/ |
| 370 |
#define LPDDR3_RL16_WL13 (0xe) |
| 371 |
|
| 372 |
/* 1:enable nWR programming > 9(default)*/ |
| 373 |
#define LPDDR3_N_WRE (1 << 4) |
| 374 |
/* 1:Select WL Set B*/ |
| 375 |
#define LPDDR3_WL_S (1 << 6) |
| 376 |
/* 1:enable*/ |
| 377 |
#define LPDDR3_WR_LEVEL (1 << 7) |
| 378 |
|
| 379 |
/* MR3 (IO Configuration 1) */ |
| 380 |
#define LPDDR3_DS_34 (0x1) |
| 381 |
#define LPDDR3_DS_40 (0x2) |
| 382 |
#define LPDDR3_DS_48 (0x3) |
| 383 |
#define LPDDR3_DS_60 (0x4) |
| 384 |
#define LPDDR3_DS_80 (0x6) |
| 385 |
#define LPDDR3_DS_34D_40U (0x9) |
| 386 |
#define LPDDR3_DS_40D_48U (0xa) |
| 387 |
#define LPDDR3_DS_34D_48U (0xb) |
| 388 |
|
| 389 |
/* MR4 (Device Temperature) */ |
| 390 |
#define LPDDR3_TREF_MASK (0x7) |
| 391 |
/* SDRAM Low temperature operating limit exceeded */ |
| 392 |
#define LPDDR3_LT_EXED (0x0) |
| 393 |
#define LPDDR3_4_TREF (0x1) |
| 394 |
#define LPDDR3_2_TREF (0x2) |
| 395 |
#define LPDDR3_1_TREF (0x3) |
| 396 |
#define LPDDR3_05_TREF (0x4) |
| 397 |
#define LPDDR3_025_TREF (0x5) |
| 398 |
#define LPDDR3_025_TREF_DERATE (0x6) |
| 399 |
/* SDRAM High temperature operating limit exceeded */ |
| 400 |
#define LPDDR3_HT_EXED (0x7) |
| 401 |
|
| 402 |
/* 1:value has changed since last read of MR4 */ |
| 403 |
#define LPDDR3_TUF (0x1 << 7) |
| 404 |
|
| 405 |
/* MR8 (Basic configuration 4) */ |
| 406 |
#define LPDDR3_S8 (0x3) |
| 407 |
#define LPDDR3_DENSITY(mr8) (8 << (((mr8) >> 2) & 0xf)) |
| 408 |
#define LPDDR3_IO_WIDTH(mr8) (32 >> (((mr8) >> 6) & 0x3)) |
| 409 |
|
| 410 |
/* MR10 (Calibration) */ |
| 411 |
#define LPDDR3_ZQINIT (0xff) |
| 412 |
#define LPDDR3_ZQCL (0xab) |
| 413 |
#define LPDDR3_ZQCS (0x56) |
| 414 |
#define LPDDR3_ZQRESET (0xc3) |
| 415 |
|
| 416 |
/* MR11 (ODT Control) */ |
| 417 |
#define LPDDR3_ODT_60 (1) |
| 418 |
#define LPDDR3_ODT_120 (2) |
| 419 |
#define LPDDR3_ODT_240 (3) |
| 420 |
#define LPDDR3_ODT_DIS (0) |
| 421 |
|
| 422 |
/* MR2 (Device Feature 2) */ |
| 423 |
/* RL & nRTP for DBI-RD Disabled */ |
| 424 |
#define LPDDR4_RL6_NRTP8 (0x0) |
| 425 |
#define LPDDR4_RL10_NRTP8 (0x1) |
| 426 |
#define LPDDR4_RL14_NRTP8 (0x2) |
| 427 |
#define LPDDR4_RL20_NRTP8 (0x3) |
| 428 |
#define LPDDR4_RL24_NRTP10 (0x4) |
| 429 |
#define LPDDR4_RL28_NRTP12 (0x5) |
| 430 |
#define LPDDR4_RL32_NRTP14 (0x6) |
| 431 |
#define LPDDR4_RL36_NRTP16 (0x7) |
| 432 |
/* RL & nRTP for DBI-RD Disabled */ |
| 433 |
#define LPDDR4_RL12_NRTP8 (0x1) |
| 434 |
#define LPDDR4_RL16_NRTP8 (0x2) |
| 435 |
#define LPDDR4_RL22_NRTP8 (0x3) |
| 436 |
#define LPDDR4_RL28_NRTP10 (0x4) |
| 437 |
#define LPDDR4_RL32_NRTP12 (0x5) |
| 438 |
#define LPDDR4_RL36_NRTP14 (0x6) |
| 439 |
#define LPDDR4_RL40_NRTP16 (0x7) |
| 440 |
/* WL Set A,default */ |
| 441 |
#define LPDDR4_A_WL4 (0x0) |
| 442 |
#define LPDDR4_A_WL6 (0x1) |
| 443 |
#define LPDDR4_A_WL8 (0x2) |
| 444 |
#define LPDDR4_A_WL10 (0x3) |
| 445 |
#define LPDDR4_A_WL12 (0x4) |
| 446 |
#define LPDDR4_A_WL14 (0x5) |
| 447 |
#define LPDDR4_A_WL16 (0x6) |
| 448 |
#define LPDDR4_A_WL18 (0x7) |
| 449 |
/* WL Set B, optional */ |
| 450 |
#define LPDDR4_B_WL4 (0x0 << 3) |
| 451 |
#define LPDDR4_B_WL8 (0x1 << 3) |
| 452 |
#define LPDDR4_B_WL12 (0x2 << 3) |
| 453 |
#define LPDDR4_B_WL18 (0x3 << 3) |
| 454 |
#define LPDDR4_B_WL22 (0x4 << 3) |
| 455 |
#define LPDDR4_B_WL26 (0x5 << 3) |
| 456 |
#define LPDDR4_B_WL30 (0x6 << 3) |
| 457 |
#define LPDDR4_B_WL34 (0x7 << 3) |
| 458 |
/* 1:Select WL Set B*/ |
| 459 |
#define LPDDR4_WL_B (1 << 6) |
| 460 |
/* 1:enable*/ |
| 461 |
#define LPDDR4_WR_LEVEL (1 << 7) |
| 462 |
|
| 463 |
/* MR3 */ |
| 464 |
#define LPDDR4_VDDQ_2_5 (0) |
| 465 |
#define LPDDR4_VDDQ_3 (1) |
| 466 |
#define LPDDR4_WRPST_0_5_TCK (0 << 1) |
| 467 |
#define LPDDR4_WRPST_1_5_TCK (1 << 1) |
| 468 |
#define LPDDR4_PPR_EN (1 << 2) |
| 469 |
/* PDDS */ |
| 470 |
#define LPDDR4_PDDS_240 (0x1 << 3) |
| 471 |
#define LPDDR4_PDDS_120 (0x2 << 3) |
| 472 |
#define LPDDR4_PDDS_80 (0x3 << 3) |
| 473 |
#define LPDDR4_PDDS_60 (0x4 << 3) |
| 474 |
#define LPDDR4_PDDS_48 (0x5 << 3) |
| 475 |
#define LPDDR4_PDDS_40 (0x6 << 3) |
| 476 |
#define LPDDR4_DBI_RD_EN (1 << 6) |
| 477 |
#define LPDDR4_DBI_WR_EN (1 << 7) |
| 478 |
|
| 479 |
/* MR11 (ODT Control) */ |
| 480 |
#define LPDDR4_DQODT_240 (1) |
| 481 |
#define LPDDR4_DQODT_120 (2) |
| 482 |
#define LPDDR4_DQODT_80 (3) |
| 483 |
#define LPDDR4_DQODT_60 (4) |
| 484 |
#define LPDDR4_DQODT_48 (5) |
| 485 |
#define LPDDR4_DQODT_40 (6) |
| 486 |
#define LPDDR4_DQODT_DIS (0) |
| 487 |
#define LPDDR4_CAODT_240 (1 << 4) |
| 488 |
#define LPDDR4_CAODT_120 (2 << 4) |
| 489 |
#define LPDDR4_CAODT_80 (3 << 4) |
| 490 |
#define LPDDR4_CAODT_60 (4 << 4) |
| 491 |
#define LPDDR4_CAODT_48 (5 << 4) |
| 492 |
#define LPDDR4_CAODT_40 (6 << 4) |
| 493 |
#define LPDDR4_CAODT_DIS (0 << 4) |
| 494 |
|
| 495 |
/* |
| 496 |
* Description: depend on input parameter "timing_config", |
| 497 |
* and calculate correspond "dram_type" |
| 498 |
* spec timing to "pdram_timing" |
| 499 |
* parameters: |
| 500 |
* input: timing_config |
| 501 |
* output: pdram_timing |
| 502 |
* NOTE: MR ODT is set, need to disable by controller |
| 503 |
*/ |
| 504 |
void dram_get_parameter(struct timing_related_config *timing_config, |
| 505 |
struct dram_timing_t *pdram_timing); |
| 506 |
|
| 507 |
#endif /* DRAM_SPEC_TIMING_H */ |