Debian Codegraph @

plat/nxp/soc-ls1028a/include/soc.h

raw
1 /*
2 * Copyright 2018-2021 NXP
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #ifndef SOC_H
8 #define SOC_H
9
10 /* Chassis specific defines - common across SoC's of a particular platform */
11 #include <dcfg_lsch3.h>
12 #include <soc_default_base_addr.h>
13 #include <soc_default_helper_macros.h>
14
15 /*
16 * SVR Definition of LS1028A
17 * (not include major and minor rev)
18 * These info is listed in Table B-6. DCFG differences
19 * between LS1028A and LS1027A of LS1028ARM(Reference Manual)
20 */
21 #define SVR_LS1017AN 0x870B25
22 #define SVR_LS1017AE 0x870B24
23 #define SVR_LS1018AN 0x870B21
24 #define SVR_LS1018AE 0x870B20
25 #define SVR_LS1027AN 0x870B05
26 #define SVR_LS1027AE 0x870B04
27 #define SVR_LS1028AN 0x870B01
28 #define SVR_LS1028AE 0x870B00
29
30 /* Number of cores in platform */
31 #define PLATFORM_CORE_COUNT 2
32 #define NUMBER_OF_CLUSTERS 1
33 #define CORES_PER_CLUSTER 2
34
35 /* Set to 0 if the clusters are not symmetrical */
36 #define SYMMETRICAL_CLUSTERS 1
37
38 #define NUM_DRAM_REGIONS 3
39
40 #define NXP_DRAM0_ADDR 0x80000000
41 #define NXP_DRAM0_MAX_SIZE 0x80000000 /* 2GB */
42
43 #define NXP_DRAM1_ADDR 0x2080000000
44 #define NXP_DRAM1_MAX_SIZE 0x1F80000000 /* 126G */
45
46 #define NXP_DRAM2_ADDR 0x6000000000
47 #define NXP_DRAM2_MAX_SIZE 0x2000000000 /* 128G */
48
49 /* DRAM0 Size defined in platform_def.h */
50 #define NXP_DRAM0_SIZE PLAT_DEF_DRAM0_SIZE
51
52 /* CCSR space memory Map */
53 #undef NXP_UART_ADDR
54 #define NXP_UART_ADDR 0x021C0500
55
56 #undef NXP_UART1_ADDR
57 #define NXP_UART1_ADDR 0x021C0600
58
59 #undef NXP_WDOG1_TZ_ADDR
60 #define NXP_WDOG1_TZ_ADDR 0x023C0000
61
62 #undef NXP_GICR_ADDR
63 #define NXP_GICR_ADDR 0x06040000
64
65 #undef NXP_GICR_SGI_ADDR
66 #define NXP_GICR_SGI_ADDR 0x06050000
67
68 /* EPU register offsets and values */
69 #define EPU_EPGCR_OFFSET 0x0
70 #define EPU_EPIMCR10_OFFSET 0x128
71 #define EPU_EPCTR10_OFFSET 0xa28
72 #define EPU_EPCCR10_OFFSET 0x828
73 #define EPU_EPCCR10_VAL 0xb2800000
74 #define EPU_EPIMCR10_VAL 0xba000000
75 #define EPU_EPCTR10_VAL 0x0
76 #define EPU_EPGCR_VAL (1 << 31)
77
78 /* PORSR1 */
79 #define PORSR1_RCW_MASK 0x07800000
80 #define PORSR1_RCW_SHIFT 23
81
82 #define SDHC1_VAL 0x8
83 #define SDHC2_VAL 0x9
84 #define I2C1_VAL 0xa
85 #define FLEXSPI_NAND2K_VAL 0xc
86 #define FLEXSPI_NAND4K_VAL 0xd
87 #define FLEXSPI_NOR 0xf
88
89 /*
90 * Required LS standard platform porting definitions
91 * for CCI-400
92 */
93 #define NXP_CCI_CLUSTER0_SL_IFACE_IX 4
94
95 /* Defines required for using XLAT tables from ARM common code */
96 #define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 40)
97 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 40)
98
99 /* Clock Divisors */
100 #define NXP_PLATFORM_CLK_DIVIDER 1
101 #define NXP_UART_CLK_DIVIDER 2
102
103 /* dcfg register offsets and values */
104 #define DCFG_DEVDISR2_ENETC (1 << 31)
105
106 #define MPIDR_AFFINITY0_MASK 0x00FF
107 #define MPIDR_AFFINITY1_MASK 0xFF00
108 #define CPUECTLR_DISABLE_TWALK_PREFETCH 0x4000000000
109 #define CPUECTLR_INS_PREFETCH_MASK 0x1800000000
110 #define CPUECTLR_DAT_PREFETCH_MASK 0x0300000000
111 #define OSDLR_EL1_DLK_LOCK 0x1
112 #define CNTP_CTL_EL0_EN 0x1
113 #define CNTP_CTL_EL0_IMASK 0x2
114
115 #define SYSTEM_PWR_DOMAINS 1
116 #define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
117 NUMBER_OF_CLUSTERS + \
118 SYSTEM_PWR_DOMAINS)
119
120 /* Power state coordination occurs at the system level */
121 #define PLAT_PD_COORD_LVL MPIDR_AFFLVL2
122 #define PLAT_MAX_PWR_LVL PLAT_PD_COORD_LVL
123
124 /* Local power state for power domains in Run state */
125 #define LS_LOCAL_STATE_RUN PSCI_LOCAL_STATE_RUN
126
127 /* define retention state */
128 #define PLAT_MAX_RET_STATE (PSCI_LOCAL_STATE_RUN + 1)
129 #define LS_LOCAL_STATE_RET PLAT_MAX_RET_STATE
130
131 /* define power-down state */
132 #define PLAT_MAX_OFF_STATE (PLAT_MAX_RET_STATE + 1)
133 #define LS_LOCAL_STATE_OFF PLAT_MAX_OFF_STATE
134
135 /* One cache line needed for bakery locks on ARM platforms */
136 #define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
137
138 #ifndef __ASSEMBLER__
139 /* CCI slave interfaces */
140 static const int cci_map[] = {
141 NXP_CCI_CLUSTER0_SL_IFACE_IX,
142 };
143 void soc_init_lowlevel(void);
144 void soc_init_percpu(void);
145 void _soc_set_start_addr(unsigned long addr);
146 void _set_platform_security(void);
147 #endif
148
149 #endif /* SOC_H */