| 1 |
/* |
| 2 |
* Copyright 2018-2021 NXP |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <endian.h> |
| 8 |
|
| 9 |
#include <arch.h> |
| 10 |
#include <caam.h> |
| 11 |
#include <cassert.h> |
| 12 |
#include <cci.h> |
| 13 |
#include <common/debug.h> |
| 14 |
#include <dcfg.h> |
| 15 |
#include <i2c.h> |
| 16 |
#include <lib/xlat_tables/xlat_tables_v2.h> |
| 17 |
#include <ls_interconnect.h> |
| 18 |
#include <mmio.h> |
| 19 |
#ifdef POLICY_FUSE_PROVISION |
| 20 |
#include <nxp_gpio.h> |
| 21 |
#endif |
| 22 |
#if TRUSTED_BOARD_BOOT |
| 23 |
#include <nxp_smmu.h> |
| 24 |
#endif |
| 25 |
#include <nxp_timer.h> |
| 26 |
#include <plat_console.h> |
| 27 |
#include <plat_gic.h> |
| 28 |
#include <plat_tzc400.h> |
| 29 |
#include <pmu.h> |
| 30 |
#include <scfg.h> |
| 31 |
#if defined(NXP_SFP_ENABLED) |
| 32 |
#include <sfp.h> |
| 33 |
#endif |
| 34 |
|
| 35 |
#include <errata.h> |
| 36 |
#ifdef CONFIG_OCRAM_ECC_EN |
| 37 |
#include <ocram.h> |
| 38 |
#endif |
| 39 |
#include "plat_common.h" |
| 40 |
#include "platform_def.h" |
| 41 |
#include "soc.h" |
| 42 |
|
| 43 |
static dcfg_init_info_t dcfg_init_data = { |
| 44 |
.g_nxp_dcfg_addr = NXP_DCFG_ADDR, |
| 45 |
.nxp_sysclk_freq = NXP_SYSCLK_FREQ, |
| 46 |
.nxp_ddrclk_freq = NXP_DDRCLK_FREQ, |
| 47 |
.nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER, |
| 48 |
}; |
| 49 |
|
| 50 |
static struct soc_type soc_list[] = { |
| 51 |
SOC_ENTRY(LS1017AN, LS1017AN, 1, 1), |
| 52 |
SOC_ENTRY(LS1017AE, LS1017AE, 1, 1), |
| 53 |
SOC_ENTRY(LS1018AN, LS1018AN, 1, 1), |
| 54 |
SOC_ENTRY(LS1018AE, LS1018AE, 1, 1), |
| 55 |
SOC_ENTRY(LS1027AN, LS1027AN, 1, 2), |
| 56 |
SOC_ENTRY(LS1027AE, LS1027AE, 1, 2), |
| 57 |
SOC_ENTRY(LS1028AN, LS1028AN, 1, 2), |
| 58 |
SOC_ENTRY(LS1028AE, LS1028AE, 1, 2), |
| 59 |
}; |
| 60 |
|
| 61 |
CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256, |
| 62 |
assert_invalid_ls1028a_cluster_count); |
| 63 |
|
| 64 |
/* |
| 65 |
* Function returns the base counter frequency |
| 66 |
* after reading the first entry at CNTFID0 (0x20 offset). |
| 67 |
* |
| 68 |
* Function is used by: |
| 69 |
* 1. ARM common code for PSCI management. |
| 70 |
* 2. ARM Generic Timer init. |
| 71 |
* |
| 72 |
*/ |
| 73 |
unsigned int plat_get_syscnt_freq2(void) |
| 74 |
{ |
| 75 |
unsigned int counter_base_frequency; |
| 76 |
/* |
| 77 |
* Below register specifies the base frequency of the system counter. |
| 78 |
* As per NXP Board Manuals: |
| 79 |
* The system counter always works with SYS_REF_CLK/4 frequency clock. |
| 80 |
*/ |
| 81 |
counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF); |
| 82 |
|
| 83 |
return counter_base_frequency; |
| 84 |
} |
| 85 |
|
| 86 |
#ifdef IMAGE_BL2 |
| 87 |
|
| 88 |
#ifdef POLICY_FUSE_PROVISION |
| 89 |
static gpio_init_info_t gpio_init_data = { |
| 90 |
.gpio1_base_addr = NXP_GPIO1_ADDR, |
| 91 |
.gpio2_base_addr = NXP_GPIO2_ADDR, |
| 92 |
.gpio3_base_addr = NXP_GPIO3_ADDR, |
| 93 |
}; |
| 94 |
#endif |
| 95 |
|
| 96 |
void soc_preload_setup(void) |
| 97 |
{ |
| 98 |
} |
| 99 |
|
| 100 |
void soc_early_init(void) |
| 101 |
{ |
| 102 |
uint8_t num_clusters, cores_per_cluster; |
| 103 |
|
| 104 |
#ifdef CONFIG_OCRAM_ECC_EN |
| 105 |
ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE); |
| 106 |
#endif |
| 107 |
dcfg_init(&dcfg_init_data); |
| 108 |
enable_timer_base_to_cluster(NXP_PMU_ADDR); |
| 109 |
enable_core_tb(NXP_PMU_ADDR); |
| 110 |
dram_regions_info_t *dram_regions_info = get_dram_regions_info(); |
| 111 |
|
| 112 |
#ifdef POLICY_FUSE_PROVISION |
| 113 |
gpio_init(&gpio_init_data); |
| 114 |
sec_init(NXP_CAAM_ADDR); |
| 115 |
#endif |
| 116 |
|
| 117 |
#if LOG_LEVEL > 0 |
| 118 |
/* Initialize the console to provide early debug support */ |
| 119 |
plat_console_init(NXP_CONSOLE_ADDR, |
| 120 |
NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE); |
| 121 |
#endif |
| 122 |
enum boot_device dev = get_boot_dev(); |
| 123 |
/* |
| 124 |
* Mark the buffer for SD in OCRAM as non secure. |
| 125 |
* The buffer is assumed to be at end of OCRAM for |
| 126 |
* the logic below to calculate TZPC programming |
| 127 |
*/ |
| 128 |
if (dev == BOOT_DEVICE_EMMC || dev == BOOT_DEVICE_SDHC2_EMMC) { |
| 129 |
/* |
| 130 |
* Calculate the region in OCRAM which is secure |
| 131 |
* The buffer for SD needs to be marked non-secure |
| 132 |
* to allow SD to do DMA operations on it |
| 133 |
*/ |
| 134 |
uint32_t secure_region = (NXP_OCRAM_SIZE - NXP_SD_BLOCK_BUF_SIZE); |
| 135 |
uint32_t mask = secure_region/TZPC_BLOCK_SIZE; |
| 136 |
|
| 137 |
mmio_write_32(NXP_OCRAM_TZPC_ADDR, mask); |
| 138 |
|
| 139 |
/* Add the entry for buffer in MMU Table */ |
| 140 |
mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR, |
| 141 |
NXP_SD_BLOCK_BUF_SIZE, MT_DEVICE | MT_RW | MT_NS); |
| 142 |
} |
| 143 |
|
| 144 |
#if TRUSTED_BOARD_BOOT |
| 145 |
uint32_t mode; |
| 146 |
|
| 147 |
sfp_init(NXP_SFP_ADDR); |
| 148 |
|
| 149 |
/* |
| 150 |
* For secure boot disable SMMU. |
| 151 |
* Later when platform security policy comes in picture, |
| 152 |
* this might get modified based on the policy |
| 153 |
*/ |
| 154 |
if (check_boot_mode_secure(&mode) == true) { |
| 155 |
bypass_smmu(NXP_SMMU_ADDR); |
| 156 |
} |
| 157 |
|
| 158 |
/* |
| 159 |
* For Mbedtls currently crypto is not supported via CAAM |
| 160 |
* enable it when that support is there. In tbbr.mk |
| 161 |
* the CAAM_INTEG is set as 0. |
| 162 |
*/ |
| 163 |
#ifndef MBEDTLS_X509 |
| 164 |
/* Initialize the crypto accelerator if enabled */ |
| 165 |
if (is_sec_enabled()) { |
| 166 |
sec_init(NXP_CAAM_ADDR); |
| 167 |
} else { |
| 168 |
INFO("SEC is disabled.\n"); |
| 169 |
} |
| 170 |
#endif |
| 171 |
#endif |
| 172 |
|
| 173 |
/* Set eDDRTQ for DDR performance */ |
| 174 |
scfg_setbits32((void *)(NXP_SCFG_ADDR + 0x210), 0x1f1f1f1f); |
| 175 |
|
| 176 |
soc_errata(); |
| 177 |
|
| 178 |
/* |
| 179 |
* Initialize Interconnect for this cluster during cold boot. |
| 180 |
* No need for locks as no other CPU is active. |
| 181 |
*/ |
| 182 |
cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map)); |
| 183 |
|
| 184 |
/* |
| 185 |
* Enable Interconnect coherency for the primary CPU's cluster. |
| 186 |
*/ |
| 187 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 188 |
plat_ls_interconnect_enter_coherency(num_clusters); |
| 189 |
|
| 190 |
delay_timer_init(NXP_TIMER_ADDR); |
| 191 |
i2c_init(NXP_I2C_ADDR); |
| 192 |
dram_regions_info->total_dram_size = init_ddr(); |
| 193 |
} |
| 194 |
|
| 195 |
void soc_bl2_prepare_exit(void) |
| 196 |
{ |
| 197 |
#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE) |
| 198 |
set_sfp_wr_disable(); |
| 199 |
#endif |
| 200 |
} |
| 201 |
|
| 202 |
/* |
| 203 |
* This function returns the boot device based on RCW_SRC |
| 204 |
*/ |
| 205 |
enum boot_device get_boot_dev(void) |
| 206 |
{ |
| 207 |
enum boot_device src = BOOT_DEVICE_NONE; |
| 208 |
uint32_t porsr1; |
| 209 |
uint32_t rcw_src; |
| 210 |
|
| 211 |
porsr1 = read_reg_porsr1(); |
| 212 |
|
| 213 |
rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT; |
| 214 |
switch (rcw_src) { |
| 215 |
case FLEXSPI_NOR: |
| 216 |
src = BOOT_DEVICE_FLEXSPI_NOR; |
| 217 |
INFO("RCW BOOT SRC is FLEXSPI NOR\n"); |
| 218 |
break; |
| 219 |
case FLEXSPI_NAND2K_VAL: |
| 220 |
case FLEXSPI_NAND4K_VAL: |
| 221 |
INFO("RCW BOOT SRC is FLEXSPI NAND\n"); |
| 222 |
src = BOOT_DEVICE_FLEXSPI_NAND; |
| 223 |
break; |
| 224 |
case SDHC1_VAL: |
| 225 |
src = BOOT_DEVICE_EMMC; |
| 226 |
INFO("RCW BOOT SRC is SD\n"); |
| 227 |
break; |
| 228 |
case SDHC2_VAL: |
| 229 |
src = BOOT_DEVICE_SDHC2_EMMC; |
| 230 |
INFO("RCW BOOT SRC is EMMC\n"); |
| 231 |
break; |
| 232 |
default: |
| 233 |
break; |
| 234 |
} |
| 235 |
|
| 236 |
return src; |
| 237 |
} |
| 238 |
|
| 239 |
/* |
| 240 |
* This function sets up access permissions on memory regions |
| 241 |
****************************************************************************/ |
| 242 |
void soc_mem_access(void) |
| 243 |
{ |
| 244 |
dram_regions_info_t *info_dram_regions = get_dram_regions_info(); |
| 245 |
struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION]; |
| 246 |
int dram_idx = 0; |
| 247 |
/* index 0 is reserved for region-0 */ |
| 248 |
int index = 1; |
| 249 |
|
| 250 |
for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions; |
| 251 |
dram_idx++) { |
| 252 |
if (info_dram_regions->region[dram_idx].size == 0) { |
| 253 |
ERROR("DDR init failure, or"); |
| 254 |
ERROR("DRAM regions not populated correctly.\n"); |
| 255 |
break; |
| 256 |
} |
| 257 |
|
| 258 |
index = populate_tzc400_reg_list(tzc400_reg_list, |
| 259 |
dram_idx, index, |
| 260 |
info_dram_regions->region[dram_idx].addr, |
| 261 |
info_dram_regions->region[dram_idx].size, |
| 262 |
NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE); |
| 263 |
} |
| 264 |
|
| 265 |
mem_access_setup(NXP_TZC_ADDR, index, tzc400_reg_list); |
| 266 |
} |
| 267 |
|
| 268 |
#else |
| 269 |
|
| 270 |
static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2]; |
| 271 |
/* |
| 272 |
* This function dynamically constructs the topology according to |
| 273 |
* SoC Flavor and returns it. |
| 274 |
*/ |
| 275 |
const unsigned char *plat_get_power_domain_tree_desc(void) |
| 276 |
{ |
| 277 |
uint8_t num_clusters, cores_per_cluster; |
| 278 |
unsigned int i; |
| 279 |
|
| 280 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 281 |
/* |
| 282 |
* The highest level is the system level. The next level is constituted |
| 283 |
* by clusters and then cores in clusters. |
| 284 |
*/ |
| 285 |
_power_domain_tree_desc[0] = 1; |
| 286 |
_power_domain_tree_desc[1] = num_clusters; |
| 287 |
|
| 288 |
for (i = 0; i < _power_domain_tree_desc[1]; i++) |
| 289 |
_power_domain_tree_desc[i + 2] = cores_per_cluster; |
| 290 |
|
| 291 |
return _power_domain_tree_desc; |
| 292 |
} |
| 293 |
|
| 294 |
/* |
| 295 |
* This function returns the core count within the cluster corresponding to |
| 296 |
* `mpidr`. |
| 297 |
*/ |
| 298 |
unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr) |
| 299 |
{ |
| 300 |
uint8_t num_clusters, cores_per_cluster; |
| 301 |
|
| 302 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 303 |
return num_clusters; |
| 304 |
} |
| 305 |
|
| 306 |
void soc_early_platform_setup2(void) |
| 307 |
{ |
| 308 |
dcfg_init(&dcfg_init_data); |
| 309 |
/* Initialize system level generic timer for Socs */ |
| 310 |
delay_timer_init(NXP_TIMER_ADDR); |
| 311 |
|
| 312 |
#if LOG_LEVEL > 0 |
| 313 |
/* Initialize the console to provide early debug support */ |
| 314 |
plat_console_init(NXP_CONSOLE_ADDR, |
| 315 |
NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE); |
| 316 |
#endif |
| 317 |
} |
| 318 |
|
| 319 |
void soc_platform_setup(void) |
| 320 |
{ |
| 321 |
/* Initialize the GIC driver, cpu and distributor interfaces */ |
| 322 |
static uintptr_t target_mask_array[PLATFORM_CORE_COUNT]; |
| 323 |
static interrupt_prop_t ls_interrupt_props[] = { |
| 324 |
PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S), |
| 325 |
PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0) |
| 326 |
}; |
| 327 |
|
| 328 |
plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR, |
| 329 |
PLATFORM_CORE_COUNT, |
| 330 |
ls_interrupt_props, |
| 331 |
ARRAY_SIZE(ls_interrupt_props), |
| 332 |
target_mask_array, |
| 333 |
plat_core_pos); |
| 334 |
|
| 335 |
plat_ls_gic_init(); |
| 336 |
enable_init_timer(); |
| 337 |
} |
| 338 |
|
| 339 |
/* This function initializes the soc from the BL31 module */ |
| 340 |
void soc_init(void) |
| 341 |
{ |
| 342 |
uint8_t num_clusters, cores_per_cluster; |
| 343 |
|
| 344 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 345 |
|
| 346 |
/* Low-level init of the soc */ |
| 347 |
soc_init_lowlevel(); |
| 348 |
_init_global_data(); |
| 349 |
soc_init_percpu(); |
| 350 |
_initialize_psci(); |
| 351 |
|
| 352 |
/* |
| 353 |
* Initialize Interconnect for this cluster during cold boot. |
| 354 |
* No need for locks as no other CPU is active. |
| 355 |
*/ |
| 356 |
cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map)); |
| 357 |
|
| 358 |
/* Enable Interconnect coherency for the primary CPU's cluster. */ |
| 359 |
plat_ls_interconnect_enter_coherency(num_clusters); |
| 360 |
|
| 361 |
/* Set platform security policies */ |
| 362 |
_set_platform_security(); |
| 363 |
|
| 364 |
/* Init SEC Engine which will be used by SiP */ |
| 365 |
if (is_sec_enabled()) { |
| 366 |
sec_init(NXP_CAAM_ADDR); |
| 367 |
} else { |
| 368 |
INFO("SEC is disabled.\n"); |
| 369 |
} |
| 370 |
} |
| 371 |
|
| 372 |
#ifdef NXP_WDOG_RESTART |
| 373 |
static uint64_t wdog_interrupt_handler(uint32_t id, uint32_t flags, |
| 374 |
void *handle, void *cookie) |
| 375 |
{ |
| 376 |
uint8_t data = WDOG_RESET_FLAG; |
| 377 |
|
| 378 |
wr_nv_app_data(WDT_RESET_FLAG_OFFSET, |
| 379 |
(uint8_t *)&data, sizeof(data)); |
| 380 |
|
| 381 |
mmio_write_32(NXP_RST_ADDR + RSTCNTL_OFFSET, SW_RST_REQ_INIT); |
| 382 |
|
| 383 |
return 0; |
| 384 |
} |
| 385 |
#endif |
| 386 |
|
| 387 |
void soc_runtime_setup(void) |
| 388 |
{ |
| 389 |
#ifdef NXP_WDOG_RESTART |
| 390 |
request_intr_type_el3(BL31_NS_WDOG_WS1, wdog_interrupt_handler); |
| 391 |
#endif |
| 392 |
} |
| 393 |
|
| 394 |
/* This function returns the total number of cores in the SoC. */ |
| 395 |
unsigned int get_tot_num_cores(void) |
| 396 |
{ |
| 397 |
uint8_t num_clusters, cores_per_cluster; |
| 398 |
|
| 399 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 400 |
return (num_clusters * cores_per_cluster); |
| 401 |
} |
| 402 |
|
| 403 |
/* This function returns the PMU IDLE Cluster mask. */ |
| 404 |
unsigned int get_pmu_idle_cluster_mask(void) |
| 405 |
{ |
| 406 |
uint8_t num_clusters, cores_per_cluster; |
| 407 |
|
| 408 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 409 |
return ((1 << num_clusters) - 2); |
| 410 |
} |
| 411 |
|
| 412 |
/* This function returns the PMU Flush Cluster mask. */ |
| 413 |
unsigned int get_pmu_flush_cluster_mask(void) |
| 414 |
{ |
| 415 |
uint8_t num_clusters, cores_per_cluster; |
| 416 |
|
| 417 |
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
| 418 |
return ((1 << num_clusters) - 2); |
| 419 |
} |
| 420 |
|
| 421 |
/* This function returns the PMU idle core mask. */ |
| 422 |
unsigned int get_pmu_idle_core_mask(void) |
| 423 |
{ |
| 424 |
return ((1 << get_tot_num_cores()) - 2); |
| 425 |
} |
| 426 |
|
| 427 |
/* Function to return the SoC SYS CLK */ |
| 428 |
unsigned int get_sys_clk(void) |
| 429 |
{ |
| 430 |
return NXP_SYSCLK_FREQ; |
| 431 |
} |
| 432 |
#endif |