| 1 |
/* |
| 2 |
* Copyright 2018-2021 NXP |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
.section .text, "ax" |
| 8 |
|
| 9 |
#include <asm_macros.S> |
| 10 |
|
| 11 |
#include <lib/psci/psci.h> |
| 12 |
#include <nxp_timer.h> |
| 13 |
#include <plat_gic.h> |
| 14 |
#include <pmu.h> |
| 15 |
|
| 16 |
#include <bl31_data.h> |
| 17 |
#include <plat_psci.h> |
| 18 |
#include <platform_def.h> |
| 19 |
|
| 20 |
.global soc_init_lowlevel |
| 21 |
.global soc_init_percpu |
| 22 |
.global _set_platform_security |
| 23 |
.global _soc_set_start_addr |
| 24 |
|
| 25 |
.global _soc_core_release |
| 26 |
.global _soc_ck_disabled |
| 27 |
.global _soc_core_restart |
| 28 |
.global _soc_core_prep_off |
| 29 |
.global _soc_core_entr_off |
| 30 |
.global _soc_core_exit_off |
| 31 |
.global _soc_sys_reset |
| 32 |
.global _soc_sys_off |
| 33 |
.global _soc_core_prep_stdby |
| 34 |
.global _soc_core_entr_stdby |
| 35 |
.global _soc_core_exit_stdby |
| 36 |
.global _soc_core_prep_pwrdn |
| 37 |
.global _soc_core_entr_pwrdn |
| 38 |
.global _soc_core_exit_pwrdn |
| 39 |
.global _soc_clstr_prep_stdby |
| 40 |
.global _soc_clstr_exit_stdby |
| 41 |
.global _soc_clstr_prep_pwrdn |
| 42 |
.global _soc_clstr_exit_pwrdn |
| 43 |
.global _soc_sys_prep_stdby |
| 44 |
.global _soc_sys_exit_stdby |
| 45 |
.global _soc_sys_prep_pwrdn |
| 46 |
.global _soc_sys_pwrdn_wfi |
| 47 |
.global _soc_sys_exit_pwrdn |
| 48 |
|
| 49 |
.equ TZPCDECPROT_0_SET_BASE, 0x02200804 |
| 50 |
.equ TZPCDECPROT_1_SET_BASE, 0x02200810 |
| 51 |
.equ TZPCDECPROT_2_SET_BASE, 0x0220081C |
| 52 |
|
| 53 |
.equ TZASC_REGION_ATTRIBUTES_0_0, 0x01100110 |
| 54 |
|
| 55 |
/* |
| 56 |
* This function initialize the soc. |
| 57 |
* in: void |
| 58 |
* out: void |
| 59 |
* uses x0 - x11 |
| 60 |
*/ |
| 61 |
func soc_init_lowlevel |
| 62 |
/* |
| 63 |
* Called from C, so save the non-volatile regs |
| 64 |
* save these as pairs of registers to maintain the |
| 65 |
* required 16-byte alignment on the stack |
| 66 |
*/ |
| 67 |
stp x4, x5, [sp, #-16]! |
| 68 |
stp x6, x7, [sp, #-16]! |
| 69 |
stp x8, x9, [sp, #-16]! |
| 70 |
stp x10, x11, [sp, #-16]! |
| 71 |
stp x12, x13, [sp, #-16]! |
| 72 |
stp x18, x30, [sp, #-16]! |
| 73 |
|
| 74 |
/* |
| 75 |
* Make sure the personality has been established by releasing cores |
| 76 |
* that are marked "to-be-disabled" from reset |
| 77 |
*/ |
| 78 |
bl release_disabled /* 0-8 */ |
| 79 |
|
| 80 |
/* Set SCRATCHRW7 to 0x0 */ |
| 81 |
ldr x0, =DCFG_SCRATCHRW7_OFFSET |
| 82 |
mov x1, xzr |
| 83 |
bl _write_reg_dcfg |
| 84 |
|
| 85 |
/* Restore the aarch32/64 non-volatile registers */ |
| 86 |
ldp x18, x30, [sp], #16 |
| 87 |
ldp x12, x13, [sp], #16 |
| 88 |
ldp x10, x11, [sp], #16 |
| 89 |
ldp x8, x9, [sp], #16 |
| 90 |
ldp x6, x7, [sp], #16 |
| 91 |
ldp x4, x5, [sp], #16 |
| 92 |
ret |
| 93 |
endfunc soc_init_lowlevel |
| 94 |
|
| 95 |
/* |
| 96 |
* void soc_init_percpu(void) |
| 97 |
* |
| 98 |
* This function performs any soc-specific initialization that is needed on |
| 99 |
* a per-core basis |
| 100 |
* in: none |
| 101 |
* out: none |
| 102 |
* uses x0 - x3 |
| 103 |
*/ |
| 104 |
func soc_init_percpu |
| 105 |
stp x4, x30, [sp, #-16]! |
| 106 |
|
| 107 |
bl plat_my_core_mask |
| 108 |
mov x2, x0 |
| 109 |
|
| 110 |
/* x2 = core mask */ |
| 111 |
|
| 112 |
/* see if this core is marked for prefetch disable */ |
| 113 |
mov x0, #PREFETCH_DIS_OFFSET |
| 114 |
bl _get_global_data /* 0-1 */ |
| 115 |
tst x0, x2 |
| 116 |
b.eq 1f |
| 117 |
bl _disable_ldstr_pfetch_A72 /* 0 */ |
| 118 |
1: |
| 119 |
mov x0, #NXP_PMU_ADDR |
| 120 |
bl enable_timer_base_to_cluster |
| 121 |
|
| 122 |
ldp x4, x30, [sp], #16 |
| 123 |
ret |
| 124 |
endfunc soc_init_percpu |
| 125 |
|
| 126 |
/* |
| 127 |
* This function determines if a core is disabled via COREDISABLEDSR |
| 128 |
* in: w0 = core_mask_lsb |
| 129 |
* out: w0 = 0, core not disabled |
| 130 |
* w0 != 0, core disabled |
| 131 |
* uses x0, x1 |
| 132 |
*/ |
| 133 |
func _soc_ck_disabled |
| 134 |
/* get base addr of dcfg block */ |
| 135 |
ldr x1, =NXP_DCFG_ADDR |
| 136 |
|
| 137 |
/* read COREDISABLEDSR */ |
| 138 |
ldr w1, [x1, #DCFG_COREDISABLEDSR_OFFSET] |
| 139 |
|
| 140 |
/* test core bit */ |
| 141 |
and w0, w1, w0 |
| 142 |
|
| 143 |
ret |
| 144 |
endfunc _soc_ck_disabled |
| 145 |
|
| 146 |
/* |
| 147 |
* This function sets the security mechanisms in the SoC to implement the |
| 148 |
* Platform Security Policy |
| 149 |
*/ |
| 150 |
func _set_platform_security |
| 151 |
mov x3, x30 |
| 152 |
|
| 153 |
#if (!SUPPRESS_TZC) |
| 154 |
/* initialize the tzpc */ |
| 155 |
bl init_tzpc |
| 156 |
#endif |
| 157 |
|
| 158 |
#if (!SUPPRESS_SEC) |
| 159 |
/* initialize secmon */ |
| 160 |
bl initSecMon |
| 161 |
#endif |
| 162 |
|
| 163 |
mov x30, x3 |
| 164 |
ret |
| 165 |
endfunc _set_platform_security |
| 166 |
|
| 167 |
/* |
| 168 |
* Part of CPU_ON |
| 169 |
* |
| 170 |
* This function releases a secondary core from reset |
| 171 |
* in: x0 = core_mask_lsb |
| 172 |
* out: none |
| 173 |
* uses: x0 - x3 |
| 174 |
*/ |
| 175 |
_soc_core_release: |
| 176 |
mov x3, x30 |
| 177 |
|
| 178 |
/* |
| 179 |
* Write to CORE_HOLD to tell the bootrom that we want this core |
| 180 |
* to run |
| 181 |
*/ |
| 182 |
ldr x1, =NXP_SEC_REGFILE_ADDR |
| 183 |
str w0, [x1, #CORE_HOLD_OFFSET] |
| 184 |
|
| 185 |
/* Read-modify-write BRRL to release core */ |
| 186 |
mov x1, #NXP_RESET_ADDR |
| 187 |
ldr w2, [x1, #BRR_OFFSET] |
| 188 |
orr w2, w2, w0 |
| 189 |
str w2, [x1, #BRR_OFFSET] |
| 190 |
dsb sy |
| 191 |
isb |
| 192 |
|
| 193 |
/* Send event */ |
| 194 |
sev |
| 195 |
isb |
| 196 |
|
| 197 |
mov x30, x3 |
| 198 |
ret |
| 199 |
|
| 200 |
/* |
| 201 |
* This function writes a 64-bit address to bootlocptrh/l |
| 202 |
* in: x0, 64-bit address to write to BOOTLOCPTRL/H |
| 203 |
* uses x0, x1, x2 |
| 204 |
*/ |
| 205 |
func _soc_set_start_addr |
| 206 |
/* Get the 64-bit base address of the dcfg block */ |
| 207 |
ldr x2, =NXP_DCFG_ADDR |
| 208 |
|
| 209 |
/* Write the 32-bit BOOTLOCPTRL register */ |
| 210 |
mov x1, x0 |
| 211 |
str w1, [x2, #DCFG_BOOTLOCPTRL_OFFSET] |
| 212 |
|
| 213 |
/* Write the 32-bit BOOTLOCPTRH register */ |
| 214 |
lsr x1, x0, #32 |
| 215 |
str w1, [x2, #DCFG_BOOTLOCPTRH_OFFSET] |
| 216 |
ret |
| 217 |
endfunc _soc_set_start_addr |
| 218 |
|
| 219 |
/* |
| 220 |
* Part of CPU_ON |
| 221 |
* |
| 222 |
* This function restarts a core shutdown via _soc_core_entr_off |
| 223 |
* in: x0 = core mask lsb (of the target cpu) |
| 224 |
* out: x0 == 0, on success |
| 225 |
* x0 != 0, on failure |
| 226 |
* uses x0 - x6 |
| 227 |
*/ |
| 228 |
_soc_core_restart: |
| 229 |
mov x6, x30 |
| 230 |
mov x4, x0 |
| 231 |
|
| 232 |
/* pgm GICD_CTLR - enable secure grp0 */ |
| 233 |
mov x5, #NXP_GICD_ADDR |
| 234 |
ldr w2, [x5, #GICD_CTLR_OFFSET] |
| 235 |
orr w2, w2, #GICD_CTLR_EN_GRP_0 |
| 236 |
str w2, [x5, #GICD_CTLR_OFFSET] |
| 237 |
dsb sy |
| 238 |
isb |
| 239 |
|
| 240 |
/* Poll on RWP til write completes */ |
| 241 |
4: |
| 242 |
ldr w2, [x5, #GICD_CTLR_OFFSET] |
| 243 |
tst w2, #GICD_CTLR_RWP |
| 244 |
b.ne 4b |
| 245 |
|
| 246 |
/* |
| 247 |
* x4 = core mask lsb |
| 248 |
* x5 = gicd base addr |
| 249 |
*/ |
| 250 |
|
| 251 |
mov x0, x4 |
| 252 |
bl get_mpidr_value |
| 253 |
|
| 254 |
/* Generate target list bit */ |
| 255 |
and x1, x0, #MPIDR_AFFINITY0_MASK |
| 256 |
mov x2, #1 |
| 257 |
lsl x2, x2, x1 |
| 258 |
|
| 259 |
/* Get the affinity1 field */ |
| 260 |
and x1, x0, #MPIDR_AFFINITY1_MASK |
| 261 |
lsl x1, x1, #8 |
| 262 |
orr x2, x2, x1 |
| 263 |
|
| 264 |
/* Insert the INTID for SGI15 */ |
| 265 |
orr x2, x2, #ICC_SGI0R_EL1_INTID |
| 266 |
|
| 267 |
/* Fire the SGI */ |
| 268 |
msr ICC_SGI0R_EL1, x2 |
| 269 |
dsb sy |
| 270 |
isb |
| 271 |
|
| 272 |
/* Load '0' on success */ |
| 273 |
mov x0, xzr |
| 274 |
|
| 275 |
mov x30, x6 |
| 276 |
ret |
| 277 |
|
| 278 |
/* |
| 279 |
* Part of CPU_OFF |
| 280 |
* |
| 281 |
* This function programs SoC & GIC registers in preparation for shutting down |
| 282 |
* the core |
| 283 |
* in: x0 = core mask lsb |
| 284 |
* out: none |
| 285 |
* uses x0 - x7 |
| 286 |
*/ |
| 287 |
_soc_core_prep_off: |
| 288 |
mov x8, x30 |
| 289 |
mov x7, x0 |
| 290 |
|
| 291 |
/* x7 = core mask lsb */ |
| 292 |
|
| 293 |
mrs x1, CPUECTLR_EL1 |
| 294 |
|
| 295 |
/* Set smp and disable L2 snoops in cpuectlr */ |
| 296 |
orr x1, x1, #CPUECTLR_SMPEN_EN |
| 297 |
orr x1, x1, #CPUECTLR_DISABLE_TWALK_PREFETCH |
| 298 |
bic x1, x1, #CPUECTLR_INS_PREFETCH_MASK |
| 299 |
bic x1, x1, #CPUECTLR_DAT_PREFETCH_MASK |
| 300 |
|
| 301 |
/* Set retention control in cpuectlr */ |
| 302 |
bic x1, x1, #CPUECTLR_TIMER_MASK |
| 303 |
orr x1, x1, #CPUECTLR_TIMER_2TICKS |
| 304 |
msr CPUECTLR_EL1, x1 |
| 305 |
|
| 306 |
/* Get redistributor rd base addr for this core */ |
| 307 |
mov x0, x7 |
| 308 |
bl get_gic_rd_base |
| 309 |
mov x6, x0 |
| 310 |
|
| 311 |
/* Get redistributor sgi base addr for this core */ |
| 312 |
mov x0, x7 |
| 313 |
bl get_gic_sgi_base |
| 314 |
mov x5, x0 |
| 315 |
|
| 316 |
/* |
| 317 |
* x5 = gicr sgi base addr |
| 318 |
* x6 = gicr rd base addr |
| 319 |
* x7 = core mask lsb |
| 320 |
*/ |
| 321 |
|
| 322 |
/* Disable SGI 15 at redistributor - GICR_ICENABLER0 */ |
| 323 |
mov w3, #GICR_ICENABLER0_SGI15 |
| 324 |
str w3, [x5, #GICR_ICENABLER0_OFFSET] |
| 325 |
2: |
| 326 |
/* Poll on rwp bit in GICR_CTLR */ |
| 327 |
ldr w4, [x6, #GICR_CTLR_OFFSET] |
| 328 |
tst w4, #GICR_CTLR_RWP |
| 329 |
b.ne 2b |
| 330 |
|
| 331 |
/* Disable GRP1 interrupts at cpu interface */ |
| 332 |
msr ICC_IGRPEN1_EL3, xzr |
| 333 |
|
| 334 |
/* Disable GRP0 ints at cpu interface */ |
| 335 |
msr ICC_IGRPEN0_EL1, xzr |
| 336 |
|
| 337 |
/* Program the redistributor - poll on GICR_CTLR.RWP as needed */ |
| 338 |
|
| 339 |
/* Define SGI 15 as Grp0 - GICR_IGROUPR0 */ |
| 340 |
ldr w4, [x5, #GICR_IGROUPR0_OFFSET] |
| 341 |
bic w4, w4, #GICR_IGROUPR0_SGI15 |
| 342 |
str w4, [x5, #GICR_IGROUPR0_OFFSET] |
| 343 |
|
| 344 |
/* Define SGI 15 as Grp0 - GICR_IGRPMODR0 */ |
| 345 |
ldr w3, [x5, #GICR_IGRPMODR0_OFFSET] |
| 346 |
bic w3, w3, #GICR_IGRPMODR0_SGI15 |
| 347 |
str w3, [x5, #GICR_IGRPMODR0_OFFSET] |
| 348 |
|
| 349 |
/* Set priority of SGI 15 to highest (0x0) - GICR_IPRIORITYR3 */ |
| 350 |
ldr w4, [x5, #GICR_IPRIORITYR3_OFFSET] |
| 351 |
bic w4, w4, #GICR_IPRIORITYR3_SGI15_MASK |
| 352 |
str w4, [x5, #GICR_IPRIORITYR3_OFFSET] |
| 353 |
|
| 354 |
/* Enable SGI 15 at redistributor - GICR_ISENABLER0 */ |
| 355 |
mov w3, #GICR_ISENABLER0_SGI15 |
| 356 |
str w3, [x5, #GICR_ISENABLER0_OFFSET] |
| 357 |
dsb sy |
| 358 |
isb |
| 359 |
3: |
| 360 |
/* Poll on rwp bit in GICR_CTLR */ |
| 361 |
ldr w4, [x6, #GICR_CTLR_OFFSET] |
| 362 |
tst w4, #GICR_CTLR_RWP |
| 363 |
b.ne 3b |
| 364 |
|
| 365 |
/* Quiesce the debug interfaces */ |
| 366 |
mrs x3, osdlr_el1 |
| 367 |
orr x3, x3, #OSDLR_EL1_DLK_LOCK |
| 368 |
msr osdlr_el1, x3 |
| 369 |
isb |
| 370 |
|
| 371 |
/* Enable grp0 ints */ |
| 372 |
mov x3, #ICC_IGRPEN0_EL1_EN |
| 373 |
msr ICC_IGRPEN0_EL1, x3 |
| 374 |
|
| 375 |
/* |
| 376 |
* x5 = gicr sgi base addr |
| 377 |
* x6 = gicr rd base addr |
| 378 |
* x7 = core mask lsb |
| 379 |
*/ |
| 380 |
|
| 381 |
/* Clear any pending interrupts */ |
| 382 |
mvn w1, wzr |
| 383 |
str w1, [x5, #GICR_ICPENDR0_OFFSET] |
| 384 |
|
| 385 |
/* Make sure system counter is enabled */ |
| 386 |
ldr x3, =NXP_TIMER_ADDR |
| 387 |
ldr w0, [x3, #SYS_COUNTER_CNTCR_OFFSET] |
| 388 |
tst w0, #SYS_COUNTER_CNTCR_EN |
| 389 |
b.ne 4f |
| 390 |
orr w0, w0, #SYS_COUNTER_CNTCR_EN |
| 391 |
str w0, [x3, #SYS_COUNTER_CNTCR_OFFSET] |
| 392 |
4: |
| 393 |
/* Enable the core timer and mask timer interrupt */ |
| 394 |
mov x1, #CNTP_CTL_EL0_EN |
| 395 |
orr x1, x1, #CNTP_CTL_EL0_IMASK |
| 396 |
msr cntp_ctl_el0, x1 |
| 397 |
|
| 398 |
isb |
| 399 |
mov x30, x8 |
| 400 |
ret |
| 401 |
|
| 402 |
/* |
| 403 |
* Part of CPU_OFF |
| 404 |
* |
| 405 |
* This function performs the final steps to shutdown the core |
| 406 |
* in: x0 = core mask lsb |
| 407 |
* out: none |
| 408 |
* uses x0 - x5 |
| 409 |
*/ |
| 410 |
_soc_core_entr_off: |
| 411 |
mov x5, x30 |
| 412 |
mov x4, x0 |
| 413 |
|
| 414 |
/* x4 = core mask */ |
| 415 |
1: |
| 416 |
/* Enter low-power state by executing wfi */ |
| 417 |
wfi |
| 418 |
|
| 419 |
/* See if SGI15 woke us up */ |
| 420 |
mrs x2, ICC_IAR0_EL1 |
| 421 |
mov x3, #ICC_IAR0_EL1_SGI15 |
| 422 |
cmp x2, x3 |
| 423 |
b.ne 1b |
| 424 |
|
| 425 |
/* Deactivate the int */ |
| 426 |
msr ICC_EOIR0_EL1, x2 |
| 427 |
|
| 428 |
/* x4 = core mask */ |
| 429 |
2: |
| 430 |
/* Check if core has been turned on */ |
| 431 |
mov x0, x4 |
| 432 |
bl _getCoreState |
| 433 |
|
| 434 |
/* x0 = core state */ |
| 435 |
|
| 436 |
cmp x0, #CORE_WAKEUP |
| 437 |
b.ne 1b |
| 438 |
|
| 439 |
/* If we get here, then we have exited the wfi */ |
| 440 |
mov x30, x5 |
| 441 |
ret |
| 442 |
|
| 443 |
/* |
| 444 |
* Part of CPU_OFF |
| 445 |
* |
| 446 |
* This function starts the process of starting a core back up |
| 447 |
* in: x0 = core mask lsb |
| 448 |
* out: none |
| 449 |
* uses x0, x1, x2, x3, x4, x5, x6 |
| 450 |
*/ |
| 451 |
_soc_core_exit_off: |
| 452 |
mov x6, x30 |
| 453 |
mov x5, x0 |
| 454 |
|
| 455 |
/* Disable forwarding of GRP0 ints at cpu interface */ |
| 456 |
msr ICC_IGRPEN0_EL1, xzr |
| 457 |
|
| 458 |
/* Get redistributor sgi base addr for this core */ |
| 459 |
mov x0, x5 |
| 460 |
bl get_gic_sgi_base |
| 461 |
mov x4, x0 |
| 462 |
|
| 463 |
/* x4 = gicr sgi base addr */ |
| 464 |
/* x5 = core mask */ |
| 465 |
|
| 466 |
/* Disable SGI 15 at redistributor - GICR_ICENABLER0 */ |
| 467 |
mov w1, #GICR_ICENABLER0_SGI15 |
| 468 |
str w1, [x4, #GICR_ICENABLER0_OFFSET] |
| 469 |
|
| 470 |
/* Get redistributor rd base addr for this core */ |
| 471 |
mov x0, x5 |
| 472 |
bl get_gic_rd_base |
| 473 |
mov x4, x0 |
| 474 |
|
| 475 |
/* x4 = gicr rd base addr */ |
| 476 |
2: |
| 477 |
/* Poll on rwp bit in GICR_CTLR */ |
| 478 |
ldr w2, [x4, #GICR_CTLR_OFFSET] |
| 479 |
tst w2, #GICR_CTLR_RWP |
| 480 |
b.ne 2b |
| 481 |
|
| 482 |
/* x4 = gicr rd base addr */ |
| 483 |
|
| 484 |
/* Unlock the debug interfaces */ |
| 485 |
mrs x3, osdlr_el1 |
| 486 |
bic x3, x3, #OSDLR_EL1_DLK_LOCK |
| 487 |
msr osdlr_el1, x3 |
| 488 |
isb |
| 489 |
|
| 490 |
dsb sy |
| 491 |
isb |
| 492 |
mov x30, x6 |
| 493 |
ret |
| 494 |
|
| 495 |
/* |
| 496 |
* This function requests a reset of the entire SOC |
| 497 |
* in: none |
| 498 |
* out: none |
| 499 |
* uses: x0, x1, x2, x3, x4, x5, x6 |
| 500 |
*/ |
| 501 |
_soc_sys_reset: |
| 502 |
mov x3, x30 |
| 503 |
|
| 504 |
/* Make sure the mask is cleared in the reset request mask register */ |
| 505 |
mov x0, #RST_RSTRQMR1_OFFSET |
| 506 |
mov w1, wzr |
| 507 |
bl _write_reg_reset |
| 508 |
|
| 509 |
/* Set the reset request */ |
| 510 |
mov x4, #RST_RSTCR_OFFSET |
| 511 |
mov x0, x4 |
| 512 |
mov w1, #RSTCR_RESET_REQ |
| 513 |
bl _write_reg_reset |
| 514 |
|
| 515 |
/* x4 = RST_RSTCR_OFFSET */ |
| 516 |
|
| 517 |
/* |
| 518 |
* Just in case this address range is mapped as cacheable, |
| 519 |
* flush the write out of the dcaches |
| 520 |
*/ |
| 521 |
mov x2, #NXP_RESET_ADDR |
| 522 |
add x2, x2, x4 |
| 523 |
dc cvac, x2 |
| 524 |
dsb st |
| 525 |
isb |
| 526 |
|
| 527 |
/* This function does not return */ |
| 528 |
1: |
| 529 |
wfi |
| 530 |
b 1b |
| 531 |
|
| 532 |
/* |
| 533 |
* Part of SYSTEM_OFF |
| 534 |
* |
| 535 |
* This function turns off the SoC clocks |
| 536 |
* Note: this function is not intended to return, and the only allowable |
| 537 |
* recovery is POR |
| 538 |
* in: none |
| 539 |
* out: none |
| 540 |
* uses x0, x1, x2, x3 |
| 541 |
*/ |
| 542 |
_soc_sys_off: |
| 543 |
/* |
| 544 |
* Disable sec, spi and flexspi |
| 545 |
* TBD - Check if eNETC needs to be disabled |
| 546 |
*/ |
| 547 |
ldr x2, =NXP_DCFG_ADDR |
| 548 |
ldr x0, =DCFG_DEVDISR1_OFFSET |
| 549 |
ldr w1, =DCFG_DEVDISR1_SEC |
| 550 |
str w1, [x2, x0] |
| 551 |
ldr x0, =DCFG_DEVDISR4_OFFSET |
| 552 |
ldr w1, =DCFG_DEVDISR4_SPI_QSPI |
| 553 |
str w1, [x2, x0] |
| 554 |
|
| 555 |
/* Set TPMWAKEMR0 */ |
| 556 |
ldr x0, =TPMWAKEMR0_ADDR |
| 557 |
mov w1, #0x1 |
| 558 |
str w1, [x0] |
| 559 |
|
| 560 |
/* Disable icache, dcache, mmu @ EL1 */ |
| 561 |
mov x1, #SCTLR_I_C_M_MASK |
| 562 |
mrs x0, sctlr_el1 |
| 563 |
bic x0, x0, x1 |
| 564 |
msr sctlr_el1, x0 |
| 565 |
|
| 566 |
/* Disable L2 prefetches */ |
| 567 |
mrs x0, CPUECTLR_EL1 |
| 568 |
orr x0, x0, #CPUECTLR_SMPEN_EN |
| 569 |
bic x0, x0, #CPUECTLR_TIMER_MASK |
| 570 |
orr x0, x0, #CPUECTLR_TIMER_2TICKS |
| 571 |
msr CPUECTLR_EL1, x0 |
| 572 |
dsb sy |
| 573 |
isb |
| 574 |
|
| 575 |
/* Disable CCI snoop domain */ |
| 576 |
ldr x0, =NXP_CCI_ADDR |
| 577 |
mov w1, #0x1 |
| 578 |
str w1, [x0] |
| 579 |
|
| 580 |
bl get_pmu_idle_core_mask |
| 581 |
|
| 582 |
/* x3 = pmu base addr */ |
| 583 |
mov x3, #NXP_PMU_ADDR |
| 584 |
4: |
| 585 |
ldr w1, [x3, #PMU_PCPW20SR_OFFSET] |
| 586 |
cmp w1, w0 |
| 587 |
b.ne 4b |
| 588 |
|
| 589 |
bl get_pmu_idle_cluster_mask |
| 590 |
mov x3, #NXP_PMU_ADDR |
| 591 |
str w0, [x3, #PMU_CLAINACTSETR_OFFSET] |
| 592 |
|
| 593 |
bl get_pmu_idle_core_mask |
| 594 |
mov x3, #NXP_PMU_ADDR |
| 595 |
1: |
| 596 |
ldr w1, [x3, #PMU_PCPW20SR_OFFSET] |
| 597 |
cmp w1, w0 |
| 598 |
b.ne 1b |
| 599 |
|
| 600 |
bl get_pmu_flush_cluster_mask |
| 601 |
mov x3, #NXP_PMU_ADDR |
| 602 |
str w0, [x3, #PMU_CLL2FLUSHSETR_OFFSET] |
| 603 |
2: |
| 604 |
ldr w1, [x3, #PMU_CLL2FLUSHSR_OFFSET] |
| 605 |
cmp w1, w0 |
| 606 |
b.ne 2b |
| 607 |
|
| 608 |
str w0, [x3, #PMU_CLSL2FLUSHCLRR_OFFSET] |
| 609 |
|
| 610 |
str w0, [x3, #PMU_CLSINACTSETR_OFFSET] |
| 611 |
|
| 612 |
mov x2, #DAIF_SET_MASK |
| 613 |
mrs x1, spsr_el1 |
| 614 |
orr x1, x1, x2 |
| 615 |
msr spsr_el1, x1 |
| 616 |
|
| 617 |
mrs x1, spsr_el2 |
| 618 |
orr x1, x1, x2 |
| 619 |
msr spsr_el2, x1 |
| 620 |
|
| 621 |
/* Force the debug interface to be quiescent */ |
| 622 |
mrs x0, osdlr_el1 |
| 623 |
orr x0, x0, #0x1 |
| 624 |
msr osdlr_el1, x0 |
| 625 |
|
| 626 |
/* Invalidate all TLB entries at all 3 exception levels */ |
| 627 |
tlbi alle1 |
| 628 |
tlbi alle2 |
| 629 |
tlbi alle3 |
| 630 |
|
| 631 |
/* x3 = pmu base addr */ |
| 632 |
|
| 633 |
/* Request lpm20 */ |
| 634 |
ldr x0, =PMU_POWMGTCSR_OFFSET |
| 635 |
ldr w1, =PMU_POWMGTCSR_VAL |
| 636 |
str w1, [x3, x0] |
| 637 |
isb |
| 638 |
dsb sy |
| 639 |
5: |
| 640 |
wfe |
| 641 |
b.eq 5b |
| 642 |
|
| 643 |
/* |
| 644 |
* Part of CPU_SUSPEND |
| 645 |
* |
| 646 |
* This function performs SoC-specific programming prior to standby |
| 647 |
* in: x0 = core mask lsb |
| 648 |
* out: none |
| 649 |
* uses x0, x1 |
| 650 |
*/ |
| 651 |
_soc_core_prep_stdby: |
| 652 |
/* Clear CPUECTLR_EL1[2:0] */ |
| 653 |
mrs x1, CPUECTLR_EL1 |
| 654 |
bic x1, x1, #CPUECTLR_TIMER_MASK |
| 655 |
msr CPUECTLR_EL1, x1 |
| 656 |
|
| 657 |
ret |
| 658 |
|
| 659 |
/* |
| 660 |
* Part of CPU_SUSPEND |
| 661 |
* |
| 662 |
* This function puts the calling core into standby state |
| 663 |
* in: x0 = core mask lsb |
| 664 |
* out: none |
| 665 |
* uses x0 |
| 666 |
*/ |
| 667 |
_soc_core_entr_stdby: |
| 668 |
/* X0 = core mask lsb */ |
| 669 |
dsb sy |
| 670 |
isb |
| 671 |
wfi |
| 672 |
|
| 673 |
ret |
| 674 |
|
| 675 |
/* |
| 676 |
* Part of CPU_SUSPEND |
| 677 |
* |
| 678 |
* This function performs any SoC-specific cleanup after standby state |
| 679 |
* in: x0 = core mask lsb |
| 680 |
* out: none |
| 681 |
* uses none |
| 682 |
*/ |
| 683 |
_soc_core_exit_stdby: |
| 684 |
ret |
| 685 |
|
| 686 |
/* |
| 687 |
* Part of CPU_SUSPEND |
| 688 |
* |
| 689 |
* This function performs SoC-specific programming prior to power-down |
| 690 |
* in: x0 = core mask lsb |
| 691 |
* out: none |
| 692 |
* uses x0, x1, x2 |
| 693 |
*/ |
| 694 |
_soc_core_prep_pwrdn: |
| 695 |
/* Make sure system counter is enabled */ |
| 696 |
ldr x2, =NXP_TIMER_ADDR |
| 697 |
ldr w0, [x2, #SYS_COUNTER_CNTCR_OFFSET] |
| 698 |
tst w0, #SYS_COUNTER_CNTCR_EN |
| 699 |
b.ne 1f |
| 700 |
orr w0, w0, #SYS_COUNTER_CNTCR_EN |
| 701 |
str w0, [x2, #SYS_COUNTER_CNTCR_OFFSET] |
| 702 |
1: |
| 703 |
/* |
| 704 |
* Enable dynamic retention control (CPUECTLR[2:0]) |
| 705 |
* Set the SMPEN bit (CPUECTLR[6]) |
| 706 |
*/ |
| 707 |
mrs x1, CPUECTLR_EL1 |
| 708 |
bic x1, x1, #CPUECTLR_RET_MASK |
| 709 |
orr x1, x1, #CPUECTLR_TIMER_2TICKS |
| 710 |
orr x1, x1, #CPUECTLR_SMPEN_EN |
| 711 |
msr CPUECTLR_EL1, x1 |
| 712 |
|
| 713 |
isb |
| 714 |
ret |
| 715 |
|
| 716 |
/* |
| 717 |
* Part of CPU_SUSPEND |
| 718 |
* |
| 719 |
* This function puts the calling core into a power-down state |
| 720 |
* in: x0 = core mask lsb |
| 721 |
* out: none |
| 722 |
* uses x0 |
| 723 |
*/ |
| 724 |
_soc_core_entr_pwrdn: |
| 725 |
/* X0 = core mask lsb */ |
| 726 |
dsb sy |
| 727 |
isb |
| 728 |
wfi |
| 729 |
|
| 730 |
ret |
| 731 |
|
| 732 |
/* |
| 733 |
* Part of CPU_SUSPEND |
| 734 |
* |
| 735 |
* This function performs any SoC-specific cleanup after power-down state |
| 736 |
* in: x0 = core mask lsb |
| 737 |
* out: none |
| 738 |
* uses none |
| 739 |
*/ |
| 740 |
_soc_core_exit_pwrdn: |
| 741 |
ret |
| 742 |
|
| 743 |
/* |
| 744 |
* Part of CPU_SUSPEND |
| 745 |
* |
| 746 |
* This function performs SoC-specific programming prior to standby |
| 747 |
* in: x0 = core mask lsb |
| 748 |
* out: none |
| 749 |
* uses x0, x1 |
| 750 |
*/ |
| 751 |
_soc_clstr_prep_stdby: |
| 752 |
/* Clear CPUECTLR_EL1[2:0] */ |
| 753 |
mrs x1, CPUECTLR_EL1 |
| 754 |
bic x1, x1, #CPUECTLR_TIMER_MASK |
| 755 |
msr CPUECTLR_EL1, x1 |
| 756 |
|
| 757 |
ret |
| 758 |
|
| 759 |
/* |
| 760 |
* Part of CPU_SUSPEND |
| 761 |
* |
| 762 |
* This function performs any SoC-specific cleanup after standby state |
| 763 |
* in: x0 = core mask lsb |
| 764 |
* out: none |
| 765 |
* uses none |
| 766 |
*/ |
| 767 |
_soc_clstr_exit_stdby: |
| 768 |
ret |
| 769 |
|
| 770 |
/* |
| 771 |
* Part of CPU_SUSPEND |
| 772 |
* |
| 773 |
* This function performs SoC-specific programming prior to power-down |
| 774 |
* in: x0 = core mask lsb |
| 775 |
* out: none |
| 776 |
* uses x0, x1, x2 |
| 777 |
*/ |
| 778 |
_soc_clstr_prep_pwrdn: |
| 779 |
/* Make sure system counter is enabled */ |
| 780 |
ldr x2, =NXP_TIMER_ADDR |
| 781 |
ldr w0, [x2, #SYS_COUNTER_CNTCR_OFFSET] |
| 782 |
tst w0, #SYS_COUNTER_CNTCR_EN |
| 783 |
b.ne 1f |
| 784 |
orr w0, w0, #SYS_COUNTER_CNTCR_EN |
| 785 |
str w0, [x2, #SYS_COUNTER_CNTCR_OFFSET] |
| 786 |
1: |
| 787 |
/* |
| 788 |
* Enable dynamic retention control (CPUECTLR[2:0]) |
| 789 |
* Set the SMPEN bit (CPUECTLR[6]) |
| 790 |
*/ |
| 791 |
mrs x1, CPUECTLR_EL1 |
| 792 |
bic x1, x1, #CPUECTLR_RET_MASK |
| 793 |
orr x1, x1, #CPUECTLR_TIMER_2TICKS |
| 794 |
orr x1, x1, #CPUECTLR_SMPEN_EN |
| 795 |
msr CPUECTLR_EL1, x1 |
| 796 |
|
| 797 |
isb |
| 798 |
ret |
| 799 |
|
| 800 |
/* |
| 801 |
* Part of CPU_SUSPEND |
| 802 |
* |
| 803 |
* This function performs any SoC-specific cleanup after power-down state |
| 804 |
* in: x0 = core mask lsb |
| 805 |
* out: none |
| 806 |
* uses none |
| 807 |
*/ |
| 808 |
_soc_clstr_exit_pwrdn: |
| 809 |
ret |
| 810 |
|
| 811 |
/* |
| 812 |
* Part of CPU_SUSPEND |
| 813 |
* |
| 814 |
* This function performs SoC-specific programming prior to standby |
| 815 |
* in: x0 = core mask lsb |
| 816 |
* out: none |
| 817 |
* uses x0, x1 |
| 818 |
*/ |
| 819 |
_soc_sys_prep_stdby: |
| 820 |
/* Clear CPUECTLR_EL1[2:0] */ |
| 821 |
mrs x1, CPUECTLR_EL1 |
| 822 |
bic x1, x1, #CPUECTLR_TIMER_MASK |
| 823 |
msr CPUECTLR_EL1, x1 |
| 824 |
|
| 825 |
ret |
| 826 |
|
| 827 |
/* |
| 828 |
* Part of CPU_SUSPEND |
| 829 |
* |
| 830 |
* This function performs any SoC-specific cleanup after standby state |
| 831 |
* in: x0 = core mask lsb |
| 832 |
* out: none |
| 833 |
* uses none |
| 834 |
*/ |
| 835 |
_soc_sys_exit_stdby: |
| 836 |
ret |
| 837 |
|
| 838 |
/* |
| 839 |
* Part of CPU_SUSPEND |
| 840 |
* |
| 841 |
* This function performs SoC-specific programming prior to |
| 842 |
* suspend-to-power-down |
| 843 |
* in: x0 = core mask lsb |
| 844 |
* out: none |
| 845 |
* uses x0, x1, x2, x3, x4 |
| 846 |
*/ |
| 847 |
_soc_sys_prep_pwrdn: |
| 848 |
/* Set retention control */ |
| 849 |
mrs x0, CPUECTLR_EL1 |
| 850 |
bic x0, x0, #CPUECTLR_TIMER_MASK |
| 851 |
orr x0, x0, #CPUECTLR_TIMER_2TICKS |
| 852 |
orr x0, x0, #CPUECTLR_SMPEN_EN |
| 853 |
msr CPUECTLR_EL1, x0 |
| 854 |
dsb sy |
| 855 |
isb |
| 856 |
ret |
| 857 |
|
| 858 |
/* |
| 859 |
* Part of CPU_SUSPEND |
| 860 |
* |
| 861 |
* This function puts the calling core, and potentially the soc, into a |
| 862 |
* low-power state |
| 863 |
* in: x0 = core mask lsb |
| 864 |
* out: x0 = 0, success |
| 865 |
* x0 < 0, failure |
| 866 |
* uses x0, x1, x2, x3, x4, x5, x6, x7, x8, x9, x10, x13, x14, x15, |
| 867 |
* x16, x17, x18 |
| 868 |
*/ |
| 869 |
_soc_sys_pwrdn_wfi: |
| 870 |
mov x18, x30 |
| 871 |
|
| 872 |
mov x3, #NXP_PMU_ADDR |
| 873 |
|
| 874 |
/* x3 = pmu base addr */ |
| 875 |
|
| 876 |
/* Backup epu registers to stack */ |
| 877 |
ldr x2, =NXP_EPU_ADDR |
| 878 |
ldr w4, [x2, #EPU_EPIMCR10_OFFSET] |
| 879 |
ldr w5, [x2, #EPU_EPCCR10_OFFSET] |
| 880 |
ldr w6, [x2, #EPU_EPCTR10_OFFSET] |
| 881 |
ldr w7, [x2, #EPU_EPGCR_OFFSET] |
| 882 |
stp x4, x5, [sp, #-16]! |
| 883 |
stp x6, x7, [sp, #-16]! |
| 884 |
|
| 885 |
/* |
| 886 |
* x2 = epu base addr |
| 887 |
* x3 = pmu base addr |
| 888 |
*/ |
| 889 |
|
| 890 |
/* Set up EPU event to receive the wake signal from PMU */ |
| 891 |
mov w4, #EPU_EPIMCR10_VAL |
| 892 |
mov w5, #EPU_EPCCR10_VAL |
| 893 |
mov w6, #EPU_EPCTR10_VAL |
| 894 |
mov w7, #EPU_EPGCR_VAL |
| 895 |
str w4, [x2, #EPU_EPIMCR10_OFFSET] |
| 896 |
str w5, [x2, #EPU_EPCCR10_OFFSET] |
| 897 |
str w6, [x2, #EPU_EPCTR10_OFFSET] |
| 898 |
str w7, [x2, #EPU_EPGCR_OFFSET] |
| 899 |
|
| 900 |
ldr x2, =NXP_GICD_ADDR |
| 901 |
|
| 902 |
/* |
| 903 |
* x2 = gicd base addr |
| 904 |
* x3 = pmu base addr |
| 905 |
*/ |
| 906 |
|
| 907 |
/* Backup flextimer/mmc/usb interrupt router */ |
| 908 |
ldr x0, =GICD_IROUTER60_OFFSET |
| 909 |
ldr x1, =GICD_IROUTER76_OFFSET |
| 910 |
ldr w4, [x2, x0] |
| 911 |
ldr w5, [x2, x1] |
| 912 |
ldr x0, =GICD_IROUTER112_OFFSET |
| 913 |
ldr x1, =GICD_IROUTER113_OFFSET |
| 914 |
ldr w6, [x2, x0] |
| 915 |
ldr w7, [x2, x1] |
| 916 |
stp x4, x5, [sp, #-16]! |
| 917 |
stp x6, x7, [sp, #-16]! |
| 918 |
|
| 919 |
/* |
| 920 |
* x2 = gicd base addr |
| 921 |
* x3 = pmu base addr |
| 922 |
* x0 = GICD_IROUTER112_OFFSET |
| 923 |
* x1 = GICD_IROUTER113_OFFSET |
| 924 |
*/ |
| 925 |
|
| 926 |
/* Re-route interrupt to cluster 1 */ |
| 927 |
ldr w4, =GICD_IROUTER_VALUE |
| 928 |
str w4, [x2, x0] |
| 929 |
str w4, [x2, x1] |
| 930 |
ldr x0, =GICD_IROUTER60_OFFSET |
| 931 |
ldr x1, =GICD_IROUTER76_OFFSET |
| 932 |
str w4, [x2, x0] |
| 933 |
str w4, [x2, x1] |
| 934 |
dsb sy |
| 935 |
isb |
| 936 |
|
| 937 |
/* x3 = pmu base addr */ |
| 938 |
|
| 939 |
/* Disable sec, Check for eNETC, spi and qspi */ |
| 940 |
ldr x2, =NXP_DCFG_ADDR |
| 941 |
ldr x0, =DCFG_DEVDISR1_OFFSET |
| 942 |
ldr w1, =DCFG_DEVDISR1_SEC |
| 943 |
str w1, [x2, x0] |
| 944 |
|
| 945 |
ldr x0, =DCFG_DEVDISR4_OFFSET |
| 946 |
ldr w1, =DCFG_DEVDISR4_SPI_QSPI |
| 947 |
str w1, [x2, x0] |
| 948 |
|
| 949 |
/* x3 = pmu base addr */ |
| 950 |
|
| 951 |
/* Set TPMWAKEMR0 */ |
| 952 |
ldr x0, =TPMWAKEMR0_ADDR |
| 953 |
mov w1, #0x1 |
| 954 |
str w1, [x0] |
| 955 |
|
| 956 |
/* Disable CCI snoop domain */ |
| 957 |
ldr x0, =NXP_CCI_ADDR |
| 958 |
mov w1, #0x1 |
| 959 |
str w1, [x0] |
| 960 |
|
| 961 |
/* Setup retention control */ |
| 962 |
mrs x0, CPUECTLR_EL1 |
| 963 |
orr x0, x0, #CPUECTLR_SMPEN_EN |
| 964 |
orr x0, x0, #CPUECTLR_TIMER_2TICKS |
| 965 |
msr CPUECTLR_EL1, x0 |
| 966 |
dsb sy |
| 967 |
isb |
| 968 |
|
| 969 |
bl get_pmu_idle_core_mask |
| 970 |
mov x3, #NXP_PMU_ADDR |
| 971 |
8: |
| 972 |
ldr w1, [x3, #PMU_PCPW20SR_OFFSET] |
| 973 |
cmp w1, w0 |
| 974 |
b.ne 8b |
| 975 |
|
| 976 |
/* x3 = NXP_PMU_ADDR */ |
| 977 |
/* 1 cluster SoC */ |
| 978 |
|
| 979 |
bl get_pmu_idle_cluster_mask |
| 980 |
mov x3, #NXP_PMU_ADDR |
| 981 |
|
| 982 |
str w0, [x3, #PMU_CLAINACTSETR_OFFSET] |
| 983 |
|
| 984 |
bl get_pmu_idle_core_mask |
| 985 |
/* x3 = NXP_PMU_ADDR */ |
| 986 |
mov x3, #NXP_PMU_ADDR |
| 987 |
1: |
| 988 |
ldr w1, [x3, #PMU_PCPW20SR_OFFSET] |
| 989 |
cmp w1, w0 |
| 990 |
b.ne 1b |
| 991 |
|
| 992 |
/* x3 = NXP_PMU_ADDR */ |
| 993 |
bl get_pmu_flush_cluster_mask |
| 994 |
mov x3, #NXP_PMU_ADDR |
| 995 |
|
| 996 |
str w0, [x3, #PMU_CLL2FLUSHSETR_OFFSET] |
| 997 |
|
| 998 |
/* x3 = NXP_PMU_ADDR */ |
| 999 |
2: |
| 1000 |
ldr w1, [x3, #PMU_CLL2FLUSHSR_OFFSET] |
| 1001 |
cmp w1, w0 |
| 1002 |
b.ne 2b |
| 1003 |
|
| 1004 |
/* x3 = NXP_PMU_ADDR */ |
| 1005 |
|
| 1006 |
str w0, [x3, #PMU_CLSL2FLUSHCLRR_OFFSET] |
| 1007 |
|
| 1008 |
str w0, [x3, #PMU_CLSINACTSETR_OFFSET] |
| 1009 |
|
| 1010 |
/* Force the debug interface to be quiescent */ |
| 1011 |
mrs x0, osdlr_el1 |
| 1012 |
orr x0, x0, #0x1 |
| 1013 |
msr osdlr_el1, x0 |
| 1014 |
|
| 1015 |
/* |
| 1016 |
* Enable the WakeRequest signal |
| 1017 |
* x3 is cpu mask starting from cpu1 to cpu0 |
| 1018 |
*/ |
| 1019 |
bl get_tot_num_cores |
| 1020 |
sub x0, x0, #1 |
| 1021 |
mov x3, #0x1 |
| 1022 |
lsl x3, x3, x0 |
| 1023 |
2: |
| 1024 |
mov x0, x3 |
| 1025 |
bl get_gic_rd_base // 0-2 |
| 1026 |
ldr w1, [x0, #GICR_WAKER_OFFSET] |
| 1027 |
orr w1, w1, #GICR_WAKER_SLEEP_BIT |
| 1028 |
str w1, [x0, #GICR_WAKER_OFFSET] |
| 1029 |
1: |
| 1030 |
ldr w1, [x0, #GICR_WAKER_OFFSET] |
| 1031 |
cmp w1, #GICR_WAKER_ASLEEP |
| 1032 |
b.ne 1b |
| 1033 |
|
| 1034 |
lsr x3, x3, #1 |
| 1035 |
cbnz x3, 2b |
| 1036 |
|
| 1037 |
/* Invalidate all TLB entries at all 3 exception levels */ |
| 1038 |
tlbi alle1 |
| 1039 |
tlbi alle2 |
| 1040 |
tlbi alle3 |
| 1041 |
|
| 1042 |
/* Request lpm20 */ |
| 1043 |
mov x3, #NXP_PMU_ADDR |
| 1044 |
ldr x0, =PMU_POWMGTCSR_OFFSET |
| 1045 |
ldr w1, =PMU_POWMGTCSR_VAL |
| 1046 |
str w1, [x3, x0] |
| 1047 |
|
| 1048 |
ldr x5, =NXP_EPU_ADDR |
| 1049 |
4: |
| 1050 |
wfe |
| 1051 |
ldr w1, [x5, #EPU_EPCTR10_OFFSET] |
| 1052 |
cmp w1, #0 |
| 1053 |
b.eq 4b |
| 1054 |
|
| 1055 |
/* x3 = NXP_PMU_ADDR */ |
| 1056 |
|
| 1057 |
bl get_pmu_idle_cluster_mask |
| 1058 |
mov x3, NXP_PMU_ADDR |
| 1059 |
|
| 1060 |
/* Re-enable the GPP ACP */ |
| 1061 |
str w0, [x3, #PMU_CLAINACTCLRR_OFFSET] |
| 1062 |
str w0, [x3, #PMU_CLSINACTCLRR_OFFSET] |
| 1063 |
|
| 1064 |
/* x3 = NXP_PMU_ADDR */ |
| 1065 |
3: |
| 1066 |
ldr w1, [x3, #PMU_CLAINACTSETR_OFFSET] |
| 1067 |
cbnz w1, 3b |
| 1068 |
4: |
| 1069 |
ldr w1, [x3, #PMU_CLSINACTSETR_OFFSET] |
| 1070 |
cbnz w1, 4b |
| 1071 |
|
| 1072 |
/* |
| 1073 |
* Enable the WakeRequest signal on cpu 0-1 |
| 1074 |
* x3 is cpu mask starting from cpu1 |
| 1075 |
*/ |
| 1076 |
bl get_tot_num_cores |
| 1077 |
sub x0, x0, #1 |
| 1078 |
mov x3, #0x1 |
| 1079 |
lsl x3, x3, x0 |
| 1080 |
2: |
| 1081 |
mov x0, x3 |
| 1082 |
bl get_gic_rd_base // 0-2 |
| 1083 |
ldr w1, [x0, #GICR_WAKER_OFFSET] |
| 1084 |
bic w1, w1, #GICR_WAKER_SLEEP_BIT |
| 1085 |
str w1, [x0, #GICR_WAKER_OFFSET] |
| 1086 |
1: |
| 1087 |
ldr w1, [x0, #GICR_WAKER_OFFSET] |
| 1088 |
cbnz w1, 1b |
| 1089 |
|
| 1090 |
lsr x3, x3, #1 |
| 1091 |
cbnz x3, 2b |
| 1092 |
|
| 1093 |
/* Enable CCI snoop domain */ |
| 1094 |
ldr x0, =NXP_CCI_ADDR |
| 1095 |
str wzr, [x0] |
| 1096 |
dsb sy |
| 1097 |
isb |
| 1098 |
|
| 1099 |
ldr x3, =NXP_EPU_ADDR |
| 1100 |
|
| 1101 |
/* x3 = epu base addr */ |
| 1102 |
|
| 1103 |
/* Enable sec, enetc, spi and qspi */ |
| 1104 |
ldr x2, =NXP_DCFG_ADDR |
| 1105 |
str wzr, [x2, #DCFG_DEVDISR1_OFFSET] |
| 1106 |
str wzr, [x2, #DCFG_DEVDISR2_OFFSET] |
| 1107 |
str wzr, [x2, #DCFG_DEVDISR4_OFFSET] |
| 1108 |
|
| 1109 |
/* Restore flextimer/mmc/usb interrupt router */ |
| 1110 |
ldr x3, =NXP_GICD_ADDR |
| 1111 |
ldp x0, x2, [sp], #16 |
| 1112 |
ldr x1, =GICD_IROUTER113_OFFSET |
| 1113 |
str w2, [x3, x1] |
| 1114 |
ldr x1, =GICD_IROUTER112_OFFSET |
| 1115 |
str w0, [x3, x1] |
| 1116 |
ldp x0, x2, [sp], #16 |
| 1117 |
ldr x1, =GICD_IROUTER76_OFFSET |
| 1118 |
str w2, [x3, x1] |
| 1119 |
ldr x1, =GICD_IROUTER60_OFFSET |
| 1120 |
str w0, [x3, x1] |
| 1121 |
|
| 1122 |
/* Restore EPU registers */ |
| 1123 |
ldr x3, =NXP_EPU_ADDR |
| 1124 |
ldp x0, x2, [sp], #16 |
| 1125 |
str w2, [x3, #EPU_EPGCR_OFFSET] |
| 1126 |
str w0, [x3, #EPU_EPCTR10_OFFSET] |
| 1127 |
ldp x2, x1, [sp], #16 |
| 1128 |
str w1, [x3, #EPU_EPCCR10_OFFSET] |
| 1129 |
str w2, [x3, #EPU_EPIMCR10_OFFSET] |
| 1130 |
|
| 1131 |
dsb sy |
| 1132 |
isb |
| 1133 |
mov x30, x18 |
| 1134 |
ret |
| 1135 |
|
| 1136 |
/* |
| 1137 |
* Part of CPU_SUSPEND |
| 1138 |
* |
| 1139 |
* This function performs any SoC-specific cleanup after power-down |
| 1140 |
* in: x0 = core mask lsb |
| 1141 |
* out: none |
| 1142 |
* uses x0, x1 |
| 1143 |
*/ |
| 1144 |
_soc_sys_exit_pwrdn: |
| 1145 |
/* Enable stack alignment checking */ |
| 1146 |
mrs x1, SCTLR_EL1 |
| 1147 |
orr x1, x1, #0x4 |
| 1148 |
msr SCTLR_EL1, x1 |
| 1149 |
|
| 1150 |
/* Enable debug interface */ |
| 1151 |
mrs x1, osdlr_el1 |
| 1152 |
bic x1, x1, #OSDLR_EL1_DLK_LOCK |
| 1153 |
msr osdlr_el1, x1 |
| 1154 |
|
| 1155 |
/* Enable i-cache */ |
| 1156 |
mrs x1, SCTLR_EL3 |
| 1157 |
orr x1, x1, #SCTLR_I_MASK |
| 1158 |
msr SCTLR_EL3, x1 |
| 1159 |
|
| 1160 |
isb |
| 1161 |
ret |
| 1162 |
|
| 1163 |
/* |
| 1164 |
* This function setc up the TrustZone Address Space Controller (TZASC) |
| 1165 |
* in: none |
| 1166 |
* out: none |
| 1167 |
* uses x0, x1 |
| 1168 |
*/ |
| 1169 |
init_tzpc: |
| 1170 |
/* Set Non Secure access for all devices protected via TZPC */ |
| 1171 |
ldr x1, =TZPCDECPROT_0_SET_BASE /* decode Protection-0 Set Reg */ |
| 1172 |
mov w0, #0xFF /* set decode region to NS, Bits[7:0] */ |
| 1173 |
str w0, [x1] |
| 1174 |
|
| 1175 |
ldr x1, =TZPCDECPROT_1_SET_BASE /* decode Protection-1 Set Reg */ |
| 1176 |
mov w0, #0xFF /* set decode region to NS, Bits[7:0] */ |
| 1177 |
str w0, [x1] |
| 1178 |
|
| 1179 |
ldr x1, =TZPCDECPROT_2_SET_BASE /* decode Protection-2 Set Reg */ |
| 1180 |
mov w0, #0xFF /* set decode region to NS, Bits[7:0] */ |
| 1181 |
str w0, [x1] |
| 1182 |
|
| 1183 |
/* entire SRAM as NS */ |
| 1184 |
ldr x1, =NXP_OCRAM_TZPC_ADDR /* secure RAM region size Reg */ |
| 1185 |
mov w0, #0x00000000 /* 0x00000000 = no secure region */ |
| 1186 |
str w0, [x1] |
| 1187 |
|
| 1188 |
ret |
| 1189 |
|
| 1190 |
/* |
| 1191 |
* This function performs any needed initialization on SecMon for |
| 1192 |
* boot services |
| 1193 |
*/ |
| 1194 |
initSecMon: |
| 1195 |
/* Read the register hpcomr */ |
| 1196 |
ldr x1, =NXP_SNVS_ADDR |
| 1197 |
ldr w0, [x1, #SECMON_HPCOMR_OFFSET] |
| 1198 |
/* Turn off secure access for the privileged registers */ |
| 1199 |
orr w0, w0, #SECMON_HPCOMR_NPSWAEN |
| 1200 |
/* Write back */ |
| 1201 |
str w0, [x1, #SECMON_HPCOMR_OFFSET] |
| 1202 |
|
| 1203 |
ret |
| 1204 |
|
| 1205 |
/* |
| 1206 |
* This function checks to see if cores which are to be disabled have been |
| 1207 |
* released from reset - if not, it releases them |
| 1208 |
* in: none |
| 1209 |
* out: none |
| 1210 |
* uses x0, x1, x2, x3, x4, x5, x6, x7, x8 |
| 1211 |
*/ |
| 1212 |
release_disabled: |
| 1213 |
stp x18, x30, [sp, #-16]! |
| 1214 |
|
| 1215 |
/* |
| 1216 |
* Get the number of cpus on this device |
| 1217 |
* Calling the below c function. |
| 1218 |
* No need to Callee saved registers x9-x15, |
| 1219 |
* as these registers are not used by the callee |
| 1220 |
* prior to calling the below C-routine. |
| 1221 |
*/ |
| 1222 |
bl get_tot_num_cores |
| 1223 |
mov x6, x0 |
| 1224 |
|
| 1225 |
/* Read COREDISABLESR */ |
| 1226 |
mov x0, #NXP_DCFG_ADDR |
| 1227 |
ldr w4, [x0, #DCFG_COREDISABLEDSR_OFFSET] |
| 1228 |
|
| 1229 |
mov x0, #NXP_RESET_ADDR |
| 1230 |
ldr w5, [x0, #BRR_OFFSET] |
| 1231 |
|
| 1232 |
/* Load the core mask for the first core */ |
| 1233 |
mov x7, #1 |
| 1234 |
|
| 1235 |
/* |
| 1236 |
* x4 = COREDISABLESR |
| 1237 |
* x5 = BRR |
| 1238 |
* x6 = loop count |
| 1239 |
* x7 = core mask bit |
| 1240 |
*/ |
| 1241 |
2: |
| 1242 |
/* Check if the core is to be disabled */ |
| 1243 |
tst x4, x7 |
| 1244 |
b.eq 1f |
| 1245 |
|
| 1246 |
/* See if disabled cores have already been released from reset */ |
| 1247 |
tst x5, x7 |
| 1248 |
b.ne 1f |
| 1249 |
|
| 1250 |
/* If core has not been released, then release it (0-3) */ |
| 1251 |
mov x0, x7 |
| 1252 |
bl _soc_core_release |
| 1253 |
|
| 1254 |
/* Record the core state in the data area (0-3) */ |
| 1255 |
mov x0, x7 |
| 1256 |
mov x1, #CORE_DISABLED |
| 1257 |
bl _setCoreState |
| 1258 |
1: |
| 1259 |
/* Decrement the counter */ |
| 1260 |
subs x6, x6, #1 |
| 1261 |
b.le 3f |
| 1262 |
/* Shift the core mask to the next core */ |
| 1263 |
lsl x7, x7, #1 |
| 1264 |
/* Continue */ |
| 1265 |
b 2b |
| 1266 |
3: |
| 1267 |
ldp x18, x30, [sp], #16 |
| 1268 |
ret |
| 1269 |
|
| 1270 |
/* |
| 1271 |
* Write a register in the DCFG block |
| 1272 |
* in: x0 = offset |
| 1273 |
* in: w1 = value to write |
| 1274 |
* uses x0, x1, x2 |
| 1275 |
*/ |
| 1276 |
_write_reg_dcfg: |
| 1277 |
ldr x2, =NXP_DCFG_ADDR |
| 1278 |
str w1, [x2, x0] |
| 1279 |
ret |
| 1280 |
|
| 1281 |
/* |
| 1282 |
* Read a register in the DCFG block |
| 1283 |
* in: x0 = offset |
| 1284 |
* out: w0 = value read |
| 1285 |
* uses x0, x1, x2 |
| 1286 |
*/ |
| 1287 |
_read_reg_dcfg: |
| 1288 |
ldr x2, =NXP_DCFG_ADDR |
| 1289 |
ldr w1, [x2, x0] |
| 1290 |
mov w0, w1 |
| 1291 |
ret |
| 1292 |
|
| 1293 |
/* |
| 1294 |
* This function returns an mpidr value for a core, given a core_mask_lsb |
| 1295 |
* in: x0 = core mask lsb |
| 1296 |
* out: x0 = affinity2:affinity1:affinity0, where affinity is 8-bits |
| 1297 |
* uses x0, x1 |
| 1298 |
*/ |
| 1299 |
get_mpidr_value: |
| 1300 |
/* Convert a core mask to an SoC core number */ |
| 1301 |
clz w0, w0 |
| 1302 |
mov w1, #31 |
| 1303 |
sub w0, w1, w0 |
| 1304 |
|
| 1305 |
/* Get the mpidr core number from the SoC core number */ |
| 1306 |
mov w1, wzr |
| 1307 |
tst x0, #1 |
| 1308 |
b.eq 1f |
| 1309 |
orr w1, w1, #1 |
| 1310 |
1: |
| 1311 |
/* Extract the cluster number */ |
| 1312 |
lsr w0, w0, #1 |
| 1313 |
orr w0, w1, w0, lsl #8 |
| 1314 |
|
| 1315 |
ret |
| 1316 |
|
| 1317 |
/* |
| 1318 |
* This function returns the redistributor base address for the core specified |
| 1319 |
* in x1 |
| 1320 |
* in: x0 - core mask lsb of specified core |
| 1321 |
* out: x0 = redistributor rd base address for specified core |
| 1322 |
* uses x0, x1, x2 |
| 1323 |
*/ |
| 1324 |
get_gic_rd_base: |
| 1325 |
/* Get the 0-based core number */ |
| 1326 |
clz w1, w0 |
| 1327 |
mov w2, #0x20 |
| 1328 |
sub w2, w2, w1 |
| 1329 |
sub w2, w2, #1 |
| 1330 |
|
| 1331 |
/* x2 = core number / loop counter */ |
| 1332 |
ldr x0, =NXP_GICR_ADDR |
| 1333 |
mov x1, #GIC_RD_OFFSET |
| 1334 |
2: |
| 1335 |
cbz x2, 1f |
| 1336 |
add x0, x0, x1 |
| 1337 |
sub x2, x2, #1 |
| 1338 |
b 2b |
| 1339 |
1: |
| 1340 |
ret |
| 1341 |
|
| 1342 |
/* |
| 1343 |
* This function returns the redistributor base address for the core specified |
| 1344 |
* in x1 |
| 1345 |
* in: x0 - core mask lsb of specified core |
| 1346 |
* out: x0 = redistributor sgi base address for specified core |
| 1347 |
* uses x0, x1, x2 |
| 1348 |
*/ |
| 1349 |
get_gic_sgi_base: |
| 1350 |
/* Get the 0-based core number */ |
| 1351 |
clz w1, w0 |
| 1352 |
mov w2, #0x20 |
| 1353 |
sub w2, w2, w1 |
| 1354 |
sub w2, w2, #1 |
| 1355 |
|
| 1356 |
/* x2 = core number / loop counter */ |
| 1357 |
ldr x0, =NXP_GICR_SGI_ADDR |
| 1358 |
mov x1, #GIC_SGI_OFFSET |
| 1359 |
2: |
| 1360 |
cbz x2, 1f |
| 1361 |
add x0, x0, x1 |
| 1362 |
sub x2, x2, #1 |
| 1363 |
b 2b |
| 1364 |
1: |
| 1365 |
ret |
| 1366 |
|
| 1367 |
/* |
| 1368 |
* Write a register in the RESET block |
| 1369 |
* in: x0 = offset |
| 1370 |
* in: w1 = value to write |
| 1371 |
* uses x0, x1, x2 |
| 1372 |
*/ |
| 1373 |
_write_reg_reset: |
| 1374 |
ldr x2, =NXP_RESET_ADDR |
| 1375 |
str w1, [x2, x0] |
| 1376 |
ret |
| 1377 |
|
| 1378 |
/* |
| 1379 |
* Read a register in the RESET block |
| 1380 |
* in: x0 = offset |
| 1381 |
* out: w0 = value read |
| 1382 |
* uses x0, x1 |
| 1383 |
*/ |
| 1384 |
_read_reg_reset: |
| 1385 |
ldr x1, =NXP_RESET_ADDR |
| 1386 |
ldr w0, [x1, x0] |
| 1387 |
ret |