| 1 |
/* |
| 2 |
* Copyright (c) 2020, ARM Limited and Contributors. All rights reserved. |
| 3 |
* Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved. |
| 4 |
* |
| 5 |
* SPDX-License-Identifier: BSD-3-Clause |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <assert.h> |
| 9 |
#include <errno.h> |
| 10 |
#include <stdbool.h> |
| 11 |
|
| 12 |
#include <arch_helpers.h> |
| 13 |
#include <bpmp_ipc.h> |
| 14 |
#include <common/debug.h> |
| 15 |
#include <drivers/delay_timer.h> |
| 16 |
#include <lib/mmio.h> |
| 17 |
#include <lib/psci/psci.h> |
| 18 |
#include <se.h> |
| 19 |
#include <tegra_platform.h> |
| 20 |
|
| 21 |
#include "se_private.h" |
| 22 |
|
| 23 |
/******************************************************************************* |
| 24 |
* Constants and Macros |
| 25 |
******************************************************************************/ |
| 26 |
#define ERR_STATUS_SW_CLEAR U(0xFFFFFFFF) |
| 27 |
#define INT_STATUS_SW_CLEAR U(0xFFFFFFFF) |
| 28 |
#define MAX_TIMEOUT_MS U(1000) /* Max. timeout of 1s */ |
| 29 |
#define NUM_SE_REGS_TO_SAVE U(4) |
| 30 |
|
| 31 |
#define BYTES_IN_WORD U(4) |
| 32 |
#define SHA256_MAX_HASH_RESULT U(7) |
| 33 |
#define SHA256_DST_SIZE U(32) |
| 34 |
#define SHA_FIRST_OP U(1) |
| 35 |
#define MAX_SHA_ENGINE_CHUNK_SIZE U(0xFFFFFF) |
| 36 |
#define SHA256_MSG_LENGTH_ONETIME U(0xFFFF) |
| 37 |
|
| 38 |
/******************************************************************************* |
| 39 |
* Data structure and global variables |
| 40 |
******************************************************************************/ |
| 41 |
static uint32_t se_regs[NUM_SE_REGS_TO_SAVE]; |
| 42 |
|
| 43 |
/* |
| 44 |
* Check that SE operation has completed after kickoff. |
| 45 |
* |
| 46 |
* This function is invoked after an SE operation has been started, |
| 47 |
* and it checks the following conditions: |
| 48 |
* |
| 49 |
* 1. SE_STATUS = IDLE |
| 50 |
* 2. AHB bus data transfer is complete. |
| 51 |
* 3. SE_ERR_STATUS is clean. |
| 52 |
*/ |
| 53 |
static bool tegra_se_is_operation_complete(void) |
| 54 |
{ |
| 55 |
uint32_t val = 0, timeout = 0, sha_status, aes_status; |
| 56 |
int32_t ret = 0; |
| 57 |
bool se_is_busy, txn_has_errors, txn_successful; |
| 58 |
|
| 59 |
/* |
| 60 |
* Poll the status register to check if the operation |
| 61 |
* completed. |
| 62 |
*/ |
| 63 |
do { |
| 64 |
val = tegra_se_read_32(CTX_SAVE_AUTO_STATUS); |
| 65 |
se_is_busy = ((val & CTX_SAVE_AUTO_SE_BUSY) != 0U); |
| 66 |
|
| 67 |
/* sleep until SE finishes */ |
| 68 |
if (se_is_busy) { |
| 69 |
mdelay(1); |
| 70 |
timeout++; |
| 71 |
} |
| 72 |
|
| 73 |
} while (se_is_busy && (timeout < MAX_TIMEOUT_MS)); |
| 74 |
|
| 75 |
/* any transaction errors? */ |
| 76 |
txn_has_errors = (tegra_se_read_32(SHA_ERR_STATUS) != 0U) || |
| 77 |
(tegra_se_read_32(AES0_ERR_STATUS) != 0U); |
| 78 |
|
| 79 |
/* transaction successful? */ |
| 80 |
sha_status = tegra_se_read_32(SHA_INT_STATUS) & SHA_SE_OP_DONE; |
| 81 |
aes_status = tegra_se_read_32(AES0_INT_STATUS) & AES0_SE_OP_DONE; |
| 82 |
txn_successful = (sha_status == SHA_SE_OP_DONE) && |
| 83 |
(aes_status == AES0_SE_OP_DONE); |
| 84 |
|
| 85 |
if ((timeout == MAX_TIMEOUT_MS) || txn_has_errors || !txn_successful) { |
| 86 |
ERROR("%s: Atomic context save operation failed!\n", |
| 87 |
__func__); |
| 88 |
ret = -ECANCELED; |
| 89 |
} |
| 90 |
|
| 91 |
return (ret == 0); |
| 92 |
} |
| 93 |
|
| 94 |
/* |
| 95 |
* Wait for SE engine to be idle and clear any pending interrupts, before |
| 96 |
* starting the next SE operation. |
| 97 |
*/ |
| 98 |
static bool tegra_se_is_ready(void) |
| 99 |
{ |
| 100 |
int32_t ret = 0; |
| 101 |
uint32_t val = 0, timeout = 0; |
| 102 |
bool se_is_ready; |
| 103 |
|
| 104 |
/* Wait for previous operation to finish */ |
| 105 |
do { |
| 106 |
val = tegra_se_read_32(CTX_SAVE_AUTO_STATUS); |
| 107 |
se_is_ready = (val == CTX_SAVE_AUTO_SE_READY); |
| 108 |
|
| 109 |
/* sleep until SE is ready */ |
| 110 |
if (!se_is_ready) { |
| 111 |
mdelay(1); |
| 112 |
timeout++; |
| 113 |
} |
| 114 |
|
| 115 |
} while (!se_is_ready && (timeout < MAX_TIMEOUT_MS)); |
| 116 |
|
| 117 |
if (timeout == MAX_TIMEOUT_MS) { |
| 118 |
ERROR("%s: SE is not ready!\n", __func__); |
| 119 |
ret = -ETIMEDOUT; |
| 120 |
} |
| 121 |
|
| 122 |
/* Clear any pending interrupts from previous operation */ |
| 123 |
tegra_se_write_32(AES0_INT_STATUS, INT_STATUS_SW_CLEAR); |
| 124 |
tegra_se_write_32(AES1_INT_STATUS, INT_STATUS_SW_CLEAR); |
| 125 |
tegra_se_write_32(RSA_INT_STATUS, INT_STATUS_SW_CLEAR); |
| 126 |
tegra_se_write_32(SHA_INT_STATUS, INT_STATUS_SW_CLEAR); |
| 127 |
|
| 128 |
/* Clear error status for each engine seen from current port */ |
| 129 |
tegra_se_write_32(AES0_ERR_STATUS, ERR_STATUS_SW_CLEAR); |
| 130 |
tegra_se_write_32(AES1_ERR_STATUS, ERR_STATUS_SW_CLEAR); |
| 131 |
tegra_se_write_32(RSA_ERR_STATUS, ERR_STATUS_SW_CLEAR); |
| 132 |
tegra_se_write_32(SHA_ERR_STATUS, ERR_STATUS_SW_CLEAR); |
| 133 |
|
| 134 |
return (ret == 0); |
| 135 |
} |
| 136 |
|
| 137 |
/* |
| 138 |
* During System Suspend, this handler triggers the hardware context |
| 139 |
* save operation. |
| 140 |
*/ |
| 141 |
static int32_t tegra_se_save_context(void) |
| 142 |
{ |
| 143 |
int32_t ret = -ECANCELED; |
| 144 |
|
| 145 |
/* |
| 146 |
* 1. Ensure all SE Driver including RNG1/PKA1 are shut down. |
| 147 |
* TSEC/R5s are powergated/idle. All tasks on SE1~SE4, RNG1, |
| 148 |
* PKA1 are wrapped up. SE0 is ready for use. |
| 149 |
* 2. Clear interrupt/error in SE0 status register. |
| 150 |
* 3. Scrub SE0 register to avoid false failure for illegal |
| 151 |
* configuration. Probably not needed, dependent on HW |
| 152 |
* implementation. |
| 153 |
* 4. Check SE is ready for HW CTX_SAVE by polling |
| 154 |
* SE_CTX_SAVE_AUTO_STATUS.SE_READY. |
| 155 |
* |
| 156 |
* Steps 1-4 are executed by tegra_se_is_ready(). |
| 157 |
* |
| 158 |
* 5. Issue context save command. |
| 159 |
* 6. Check SE is busy with CTX_SAVE, the command in step5 was not |
| 160 |
* dropped for ongoing traffic in any of SE port/engine. |
| 161 |
* 7. Poll SE register or wait for SE APB interrupt for task completion |
| 162 |
* a. Polling: Read SE_CTX_SAVE_AUTO_STATUS.BUSY till it reports IDLE |
| 163 |
* b. Interrupt: After receiving interrupt from SE APB, read |
| 164 |
* SE_CTX_SAVE_AUTO_STATUS.BUSY till it reports IDLE. |
| 165 |
* 8. Check AES0 and SHA ERR_STATUS to ensure no error case. |
| 166 |
* 9. Check AES0 and SHA INT_STATUS to ensure operation has successfully |
| 167 |
* completed. |
| 168 |
* |
| 169 |
* Steps 6-9 are executed by tegra_se_is_operation_complete(). |
| 170 |
*/ |
| 171 |
if (tegra_se_is_ready()) { |
| 172 |
|
| 173 |
/* Issue context save command */ |
| 174 |
tegra_se_write_32(AES0_OPERATION, SE_OP_CTX_SAVE); |
| 175 |
|
| 176 |
/* Wait for operation to finish */ |
| 177 |
if (tegra_se_is_operation_complete()) { |
| 178 |
ret = 0; |
| 179 |
} |
| 180 |
} |
| 181 |
|
| 182 |
return ret; |
| 183 |
} |
| 184 |
|
| 185 |
/* |
| 186 |
* Check that SE operation has completed after kickoff |
| 187 |
* This function is invoked after an SE operation has been started, |
| 188 |
* and it checks the following conditions: |
| 189 |
* 1. SE0_INT_STATUS = SE0_OP_DONE |
| 190 |
* 2. SE0_STATUS = IDLE |
| 191 |
* 3. SE0_ERR_STATUS is clean. |
| 192 |
*/ |
| 193 |
static int32_t tegra_se_sha256_hash_operation_complete(void) |
| 194 |
{ |
| 195 |
uint32_t val = 0U; |
| 196 |
|
| 197 |
/* Poll the SE interrupt register to ensure H/W operation complete */ |
| 198 |
val = tegra_se_read_32(SE0_INT_STATUS_REG_OFFSET); |
| 199 |
while (SE0_INT_OP_DONE(val) == SE0_INT_OP_DONE_CLEAR) { |
| 200 |
val = tegra_se_read_32(SE0_INT_STATUS_REG_OFFSET); |
| 201 |
if (SE0_INT_OP_DONE(val) != SE0_INT_OP_DONE_CLEAR) { |
| 202 |
break; |
| 203 |
} |
| 204 |
} |
| 205 |
|
| 206 |
/* Poll the SE status idle to ensure H/W operation complete */ |
| 207 |
val = tegra_se_read_32(SE0_SHA_STATUS_0); |
| 208 |
while (val != SE0_SHA_STATUS_IDLE) { |
| 209 |
val = tegra_se_read_32(SE0_SHA_STATUS_0); |
| 210 |
if (val == SE0_SHA_STATUS_IDLE) { |
| 211 |
break; |
| 212 |
} |
| 213 |
} |
| 214 |
|
| 215 |
/* Ensure that no errors are thrown during operation */ |
| 216 |
val = tegra_se_read_32(SE0_ERR_STATUS_REG_OFFSET); |
| 217 |
if (val != 0U) { |
| 218 |
ERROR("%s: error during SE operation! 0x%x", __func__, |
| 219 |
val); |
| 220 |
return -ENOTSUP; |
| 221 |
} |
| 222 |
|
| 223 |
return 0; |
| 224 |
} |
| 225 |
|
| 226 |
/* |
| 227 |
* Security engine primitive normal operations |
| 228 |
*/ |
| 229 |
static int32_t tegra_se_start_normal_operation(uint64_t src_addr, |
| 230 |
uint32_t nbytes, uint32_t last_buf, uint32_t src_len_inbytes) |
| 231 |
{ |
| 232 |
uint32_t val = 0U; |
| 233 |
uint32_t src_in_lo; |
| 234 |
uint32_t src_in_msb; |
| 235 |
uint32_t src_in_hi; |
| 236 |
int32_t ret = 0; |
| 237 |
|
| 238 |
if ((src_addr == 0ULL) || (nbytes == 0U)) |
| 239 |
return -EINVAL; |
| 240 |
|
| 241 |
src_in_lo = (uint32_t)src_addr; |
| 242 |
src_in_msb = (uint32_t)((src_addr >> 32U) & 0xFFU); |
| 243 |
src_in_hi = ((src_in_msb << SE0_IN_HI_ADDR_HI_0_MSB_SHIFT) | |
| 244 |
(nbytes & MAX_SHA_ENGINE_CHUNK_SIZE)); |
| 245 |
|
| 246 |
/* set SRC_IN_ADDR_LO and SRC_IN_ADDR_HI*/ |
| 247 |
tegra_se_write_32(SE0_IN_ADDR, src_in_lo); |
| 248 |
tegra_se_write_32(SE0_IN_HI_ADDR_HI, src_in_hi); |
| 249 |
|
| 250 |
val = tegra_se_read_32(SE0_INT_STATUS_REG_OFFSET); |
| 251 |
if (val > 0U) { |
| 252 |
tegra_se_write_32(SE0_INT_STATUS_REG_OFFSET, 0x0U); |
| 253 |
} |
| 254 |
|
| 255 |
/* Enable SHA interrupt for SE0 Operation */ |
| 256 |
tegra_se_write_32(SE0_SHA_INT_ENABLE, 0x1aU); |
| 257 |
|
| 258 |
/* flush to DRAM for SE to use the updated contents */ |
| 259 |
flush_dcache_range(src_addr, src_len_inbytes); |
| 260 |
|
| 261 |
/* Start SHA256 operation */ |
| 262 |
if (last_buf == 1U) { |
| 263 |
tegra_se_write_32(SE0_OPERATION_REG_OFFSET, SE0_OP_START | |
| 264 |
SE0_UNIT_OPERATION_PKT_LASTBUF_FIELD); |
| 265 |
} else { |
| 266 |
tegra_se_write_32(SE0_OPERATION_REG_OFFSET, SE0_OP_START); |
| 267 |
} |
| 268 |
|
| 269 |
return ret; |
| 270 |
} |
| 271 |
|
| 272 |
static int32_t tegra_se_calculate_sha256_hash(uint64_t src_addr, |
| 273 |
uint32_t src_len_inbyte) |
| 274 |
{ |
| 275 |
uint32_t val, last_buf, i; |
| 276 |
int32_t ret = 0; |
| 277 |
uint32_t operations; |
| 278 |
uint64_t src_len_inbits; |
| 279 |
uint32_t len_bits_msb; |
| 280 |
uint32_t len_bits_lsb; |
| 281 |
uint32_t number_of_operations, max_bytes, bytes_left, remaining_bytes; |
| 282 |
|
| 283 |
if (src_len_inbyte > MAX_SHA_ENGINE_CHUNK_SIZE) { |
| 284 |
ERROR("SHA input chunk size too big: 0x%x\n", src_len_inbyte); |
| 285 |
return -EINVAL; |
| 286 |
} |
| 287 |
|
| 288 |
if (src_addr == 0ULL) { |
| 289 |
return -EINVAL; |
| 290 |
} |
| 291 |
|
| 292 |
/* number of bytes per operation */ |
| 293 |
max_bytes = (SHA256_HASH_SIZE_BYTES * SHA256_MSG_LENGTH_ONETIME); |
| 294 |
|
| 295 |
src_len_inbits = (uint32_t)(src_len_inbyte * 8U); |
| 296 |
len_bits_msb = (uint32_t)(src_len_inbits >> 32U); |
| 297 |
len_bits_lsb = (uint32_t)src_len_inbits; |
| 298 |
|
| 299 |
/* program SE0_CONFIG for SHA256 operation */ |
| 300 |
val = (uint32_t)(SE0_CONFIG_ENC_ALG_SHA | SE0_CONFIG_ENC_MODE_SHA256 | |
| 301 |
SE0_CONFIG_DEC_ALG_NOP | SE0_CONFIG_DST_HASHREG); |
| 302 |
tegra_se_write_32(SE0_SHA_CONFIG, val); |
| 303 |
|
| 304 |
/* set SE0_SHA_MSG_LENGTH registers */ |
| 305 |
tegra_se_write_32(SE0_SHA_MSG_LENGTH_0, len_bits_lsb); |
| 306 |
tegra_se_write_32(SE0_SHA_MSG_LEFT_0, len_bits_lsb); |
| 307 |
tegra_se_write_32(SE0_SHA_MSG_LENGTH_1, len_bits_msb); |
| 308 |
|
| 309 |
/* zero out unused SE0_SHA_MSG_LENGTH and SE0_SHA_MSG_LEFT */ |
| 310 |
tegra_se_write_32(SE0_SHA_MSG_LENGTH_2, 0U); |
| 311 |
tegra_se_write_32(SE0_SHA_MSG_LENGTH_3, 0U); |
| 312 |
tegra_se_write_32(SE0_SHA_MSG_LEFT_1, 0U); |
| 313 |
tegra_se_write_32(SE0_SHA_MSG_LEFT_2, 0U); |
| 314 |
tegra_se_write_32(SE0_SHA_MSG_LEFT_3, 0U); |
| 315 |
|
| 316 |
number_of_operations = (src_len_inbyte / max_bytes); |
| 317 |
remaining_bytes = (src_len_inbyte % max_bytes); |
| 318 |
if (remaining_bytes > 0U) { |
| 319 |
number_of_operations += 1U; |
| 320 |
} |
| 321 |
|
| 322 |
/* |
| 323 |
* 1. Operations == 1: program SE0_SHA_TASK register to initiate SHA256 |
| 324 |
* hash generation by setting |
| 325 |
* 1(SE0_SHA_CONFIG_HW_INIT_HASH) to SE0_SHA_TASK |
| 326 |
* and start SHA256-normal operation. |
| 327 |
* 2. 1 < Operations < number_of_operations: program SE0_SHA_TASK to |
| 328 |
* 0(SE0_SHA_CONFIG_HW_INIT_HASH_DISABLE) to load |
| 329 |
* intermediate SHA256 digest result from |
| 330 |
* HASH_RESULT register to continue SHA256 |
| 331 |
* generation and start SHA256-normal operation. |
| 332 |
* 3. Operations == number_of_operations: continue with step 2 and set |
| 333 |
* max_bytes to bytes_left to process final |
| 334 |
* hash-result generation and start SHA256-normal |
| 335 |
* operation. |
| 336 |
*/ |
| 337 |
bytes_left = src_len_inbyte; |
| 338 |
for (operations = 1U; operations <= number_of_operations; |
| 339 |
operations++) { |
| 340 |
if (operations == SHA_FIRST_OP) { |
| 341 |
val = SE0_SHA_CONFIG_HW_INIT_HASH; |
| 342 |
} else { |
| 343 |
/* Load intermediate SHA digest result to |
| 344 |
* SHA:HASH_RESULT(0..7) to continue the SHA |
| 345 |
* calculation and tell the SHA engine to use it. |
| 346 |
*/ |
| 347 |
for (i = 0U; (i / BYTES_IN_WORD) <= |
| 348 |
SHA256_MAX_HASH_RESULT; i += BYTES_IN_WORD) { |
| 349 |
val = tegra_se_read_32(SE0_SHA_HASH_RESULT_0 + |
| 350 |
i); |
| 351 |
tegra_se_write_32(SE0_SHA_HASH_RESULT_0 + i, |
| 352 |
val); |
| 353 |
} |
| 354 |
val = SE0_SHA_CONFIG_HW_INIT_HASH_DISABLE; |
| 355 |
if (len_bits_lsb <= (max_bytes * 8U)) { |
| 356 |
len_bits_lsb = (remaining_bytes * 8U); |
| 357 |
} else { |
| 358 |
len_bits_lsb -= (max_bytes * 8U); |
| 359 |
} |
| 360 |
tegra_se_write_32(SE0_SHA_MSG_LEFT_0, len_bits_lsb); |
| 361 |
} |
| 362 |
tegra_se_write_32(SE0_SHA_TASK_CONFIG, val); |
| 363 |
|
| 364 |
max_bytes = (SHA256_HASH_SIZE_BYTES * |
| 365 |
SHA256_MSG_LENGTH_ONETIME); |
| 366 |
if (bytes_left < max_bytes) { |
| 367 |
max_bytes = bytes_left; |
| 368 |
last_buf = 1U; |
| 369 |
} else { |
| 370 |
bytes_left = bytes_left - max_bytes; |
| 371 |
last_buf = 0U; |
| 372 |
} |
| 373 |
/* start operation */ |
| 374 |
ret = tegra_se_start_normal_operation(src_addr, max_bytes, |
| 375 |
last_buf, src_len_inbyte); |
| 376 |
if (ret != 0) { |
| 377 |
ERROR("Error during SE operation! 0x%x", ret); |
| 378 |
return -EINVAL; |
| 379 |
} |
| 380 |
} |
| 381 |
|
| 382 |
return ret; |
| 383 |
} |
| 384 |
|
| 385 |
static int32_t tegra_se_save_sha256_pmc_scratch(void) |
| 386 |
{ |
| 387 |
uint32_t val = 0U, hash_offset = 0U, scratch_offset = 0U; |
| 388 |
int32_t ret; |
| 389 |
|
| 390 |
/* Check SE0 operation status */ |
| 391 |
ret = tegra_se_sha256_hash_operation_complete(); |
| 392 |
if (ret != 0) { |
| 393 |
ERROR("SE operation complete Failed! 0x%x", ret); |
| 394 |
return ret; |
| 395 |
} |
| 396 |
|
| 397 |
for (scratch_offset = SECURE_SCRATCH_TZDRAM_SHA256_HASH_START; |
| 398 |
scratch_offset <= SECURE_SCRATCH_TZDRAM_SHA256_HASH_END; |
| 399 |
scratch_offset += BYTES_IN_WORD) { |
| 400 |
val = tegra_se_read_32(SE0_SHA_HASH_RESULT_0 + hash_offset); |
| 401 |
mmio_write_32((uint32_t)(TEGRA_SCRATCH_BASE + scratch_offset), |
| 402 |
val); |
| 403 |
hash_offset += BYTES_IN_WORD; |
| 404 |
} |
| 405 |
return 0; |
| 406 |
} |
| 407 |
|
| 408 |
/* |
| 409 |
* Handler to generate SHA256 and save HASH-result to pmc-scratch register |
| 410 |
*/ |
| 411 |
int32_t tegra_se_calculate_save_sha256(uint64_t src_addr, |
| 412 |
uint32_t src_len_inbyte) |
| 413 |
{ |
| 414 |
uint32_t security; |
| 415 |
int32_t val = 0; |
| 416 |
|
| 417 |
/* Set SE_SOFT_SETTINGS=SE_SECURE to prevent NS process to change SE |
| 418 |
* registers. |
| 419 |
*/ |
| 420 |
security = tegra_se_read_32(SE0_SECURITY); |
| 421 |
tegra_se_write_32(SE0_SECURITY, security | SE0_SECURITY_SE_SOFT_SETTING); |
| 422 |
|
| 423 |
/* Bootrom enable IN_ID bit in SE0_SHA_GSCID_0 register during SC7-exit, causing |
| 424 |
* SE0 ignores SE0 operation, and therefore failure of 2nd iteration of SC7 cycle. |
| 425 |
*/ |
| 426 |
tegra_se_write_32(SE0_SHA_GSCID_0, 0x0U); |
| 427 |
|
| 428 |
/* Calculate SHA256 of BL31 */ |
| 429 |
val = tegra_se_calculate_sha256_hash(src_addr, src_len_inbyte); |
| 430 |
if (val != 0) { |
| 431 |
ERROR("%s: SHA256 generation failed\n", __func__); |
| 432 |
return val; |
| 433 |
} |
| 434 |
|
| 435 |
/* |
| 436 |
* Reset SE_SECURE to previous value. |
| 437 |
*/ |
| 438 |
tegra_se_write_32(SE0_SECURITY, security); |
| 439 |
|
| 440 |
/* copy sha256_dst to PMC Scratch register */ |
| 441 |
val = tegra_se_save_sha256_pmc_scratch(); |
| 442 |
if (val != 0) { |
| 443 |
ERROR("%s: SE0 status Error.\n", __func__); |
| 444 |
} |
| 445 |
|
| 446 |
return val; |
| 447 |
} |
| 448 |
|
| 449 |
/* |
| 450 |
* Handler to power down the SE hardware blocks - SE, RNG1 and PKA1. This |
| 451 |
* needs to be called only during System Suspend. |
| 452 |
*/ |
| 453 |
int32_t tegra_se_suspend(void) |
| 454 |
{ |
| 455 |
int32_t ret = 0; |
| 456 |
|
| 457 |
/* initialise communication channel with BPMP */ |
| 458 |
assert(tegra_bpmp_ipc_init() == 0); |
| 459 |
|
| 460 |
/* Enable SE clock before SE context save */ |
| 461 |
ret = tegra_bpmp_ipc_enable_clock(TEGRA194_CLK_SE); |
| 462 |
assert(ret == 0); |
| 463 |
|
| 464 |
/* save SE registers */ |
| 465 |
se_regs[0] = mmio_read_32(TEGRA_SE0_BASE + SE0_MUTEX_WATCHDOG_NS_LIMIT); |
| 466 |
se_regs[1] = mmio_read_32(TEGRA_SE0_BASE + SE0_AES0_ENTROPY_SRC_AGE_CTRL); |
| 467 |
se_regs[2] = mmio_read_32(TEGRA_RNG1_BASE + RNG1_MUTEX_WATCHDOG_NS_LIMIT); |
| 468 |
se_regs[3] = mmio_read_32(TEGRA_PKA1_BASE + PKA1_MUTEX_WATCHDOG_NS_LIMIT); |
| 469 |
|
| 470 |
/* Save SE context. The BootROM restores it during System Resume */ |
| 471 |
ret = tegra_se_save_context(); |
| 472 |
if (ret != 0) { |
| 473 |
ERROR("%s: context save failed (%d)\n", __func__, ret); |
| 474 |
} |
| 475 |
|
| 476 |
/* Disable SE clock after SE context save */ |
| 477 |
ret = tegra_bpmp_ipc_disable_clock(TEGRA194_CLK_SE); |
| 478 |
assert(ret == 0); |
| 479 |
|
| 480 |
return ret; |
| 481 |
} |
| 482 |
|
| 483 |
/* |
| 484 |
* Handler to power up the SE hardware block(s) during System Resume. |
| 485 |
*/ |
| 486 |
void tegra_se_resume(void) |
| 487 |
{ |
| 488 |
int32_t ret = 0; |
| 489 |
|
| 490 |
/* initialise communication channel with BPMP */ |
| 491 |
assert(tegra_bpmp_ipc_init() == 0); |
| 492 |
|
| 493 |
/* Enable SE clock before SE context restore */ |
| 494 |
ret = tegra_bpmp_ipc_enable_clock(TEGRA194_CLK_SE); |
| 495 |
assert(ret == 0); |
| 496 |
|
| 497 |
/* |
| 498 |
* When TZ takes over after System Resume, TZ should first reconfigure |
| 499 |
* SE_MUTEX_WATCHDOG_NS_LIMIT, PKA1_MUTEX_WATCHDOG_NS_LIMIT, |
| 500 |
* RNG1_MUTEX_WATCHDOG_NS_LIMIT and SE_ENTROPY_SRC_AGE_CTRL before |
| 501 |
* other operations. |
| 502 |
*/ |
| 503 |
mmio_write_32(TEGRA_SE0_BASE + SE0_MUTEX_WATCHDOG_NS_LIMIT, se_regs[0]); |
| 504 |
mmio_write_32(TEGRA_SE0_BASE + SE0_AES0_ENTROPY_SRC_AGE_CTRL, se_regs[1]); |
| 505 |
mmio_write_32(TEGRA_RNG1_BASE + RNG1_MUTEX_WATCHDOG_NS_LIMIT, se_regs[2]); |
| 506 |
mmio_write_32(TEGRA_PKA1_BASE + PKA1_MUTEX_WATCHDOG_NS_LIMIT, se_regs[3]); |
| 507 |
|
| 508 |
/* Disable SE clock after SE context restore */ |
| 509 |
ret = tegra_bpmp_ipc_disable_clock(TEGRA194_CLK_SE); |
| 510 |
assert(ret == 0); |
| 511 |
} |