| 1 |
/* |
| 2 |
* Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <arch_helpers.h> |
| 8 |
#include <assert.h> |
| 9 |
#include <bl31/bl31.h> |
| 10 |
#include <common/bl_common.h> |
| 11 |
#include <common/interrupt_props.h> |
| 12 |
#include <drivers/console.h> |
| 13 |
#include <context.h> |
| 14 |
#include <lib/el3_runtime/context_mgmt.h> |
| 15 |
#include <cortex_a57.h> |
| 16 |
#include <common/debug.h> |
| 17 |
#include <denver.h> |
| 18 |
#include <drivers/arm/gic_common.h> |
| 19 |
#include <drivers/arm/gicv2.h> |
| 20 |
#include <bl31/interrupt_mgmt.h> |
| 21 |
#include <mce.h> |
| 22 |
#include <mce_private.h> |
| 23 |
#include <memctrl.h> |
| 24 |
#include <plat/common/platform.h> |
| 25 |
#include <smmu.h> |
| 26 |
#include <spe.h> |
| 27 |
#include <tegra_def.h> |
| 28 |
#include <tegra_platform.h> |
| 29 |
#include <tegra_private.h> |
| 30 |
#include <lib/xlat_tables/xlat_tables_v2.h> |
| 31 |
|
| 32 |
/* ID for spe-console */ |
| 33 |
#define TEGRA_CONSOLE_SPE_ID 0xFE |
| 34 |
|
| 35 |
/******************************************************************************* |
| 36 |
* Structure to store the SCR addresses and its expected settings. |
| 37 |
******************************************************************************* |
| 38 |
*/ |
| 39 |
typedef struct { |
| 40 |
uint32_t scr_addr; |
| 41 |
uint32_t scr_val; |
| 42 |
} scr_settings_t; |
| 43 |
|
| 44 |
static const scr_settings_t t194_scr_settings[] = { |
| 45 |
{ SCRATCH_RSV68_SCR, SCRATCH_RSV68_SCR_VAL }, |
| 46 |
{ SCRATCH_RSV71_SCR, SCRATCH_RSV71_SCR_VAL }, |
| 47 |
{ SCRATCH_RSV72_SCR, SCRATCH_RSV72_SCR_VAL }, |
| 48 |
{ SCRATCH_RSV75_SCR, SCRATCH_RSV75_SCR_VAL }, |
| 49 |
{ SCRATCH_RSV81_SCR, SCRATCH_RSV81_SCR_VAL }, |
| 50 |
{ SCRATCH_RSV97_SCR, SCRATCH_RSV97_SCR_VAL }, |
| 51 |
{ SCRATCH_RSV99_SCR, SCRATCH_RSV99_SCR_VAL }, |
| 52 |
{ SCRATCH_RSV109_SCR, SCRATCH_RSV109_SCR_VAL }, |
| 53 |
{ MISCREG_SCR_SCRTZWELCK, MISCREG_SCR_SCRTZWELCK_VAL } |
| 54 |
}; |
| 55 |
|
| 56 |
/******************************************************************************* |
| 57 |
* The Tegra power domain tree has a single system level power domain i.e. a |
| 58 |
* single root node. The first entry in the power domain descriptor specifies |
| 59 |
* the number of power domains at the highest power level. |
| 60 |
******************************************************************************* |
| 61 |
*/ |
| 62 |
static const uint8_t tegra_power_domain_tree_desc[] = { |
| 63 |
/* No of root nodes */ |
| 64 |
1, |
| 65 |
/* No of clusters */ |
| 66 |
PLATFORM_CLUSTER_COUNT, |
| 67 |
/* No of CPU cores - cluster0 */ |
| 68 |
PLATFORM_MAX_CPUS_PER_CLUSTER, |
| 69 |
/* No of CPU cores - cluster1 */ |
| 70 |
PLATFORM_MAX_CPUS_PER_CLUSTER, |
| 71 |
/* No of CPU cores - cluster2 */ |
| 72 |
PLATFORM_MAX_CPUS_PER_CLUSTER, |
| 73 |
/* No of CPU cores - cluster3 */ |
| 74 |
PLATFORM_MAX_CPUS_PER_CLUSTER |
| 75 |
}; |
| 76 |
|
| 77 |
/******************************************************************************* |
| 78 |
* This function returns the Tegra default topology tree information. |
| 79 |
******************************************************************************/ |
| 80 |
const uint8_t *plat_get_power_domain_tree_desc(void) |
| 81 |
{ |
| 82 |
return tegra_power_domain_tree_desc; |
| 83 |
} |
| 84 |
|
| 85 |
/* |
| 86 |
* Table of regions to map using the MMU. |
| 87 |
*/ |
| 88 |
static const mmap_region_t tegra_mmap[] = { |
| 89 |
MAP_REGION_FLAT(TEGRA_MISC_BASE, 0x4000U, /* 16KB */ |
| 90 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 91 |
MAP_REGION_FLAT(TEGRA_GPCDMA_BASE, 0x10000U, /* 64KB */ |
| 92 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 93 |
MAP_REGION_FLAT(TEGRA_MC_STREAMID_BASE, 0x8000U, /* 32KB */ |
| 94 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 95 |
MAP_REGION_FLAT(TEGRA_MC_BASE, 0x8000U, /* 32KB */ |
| 96 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 97 |
#if !ENABLE_CONSOLE_SPE |
| 98 |
MAP_REGION_FLAT(TEGRA_UARTA_BASE, 0x20000U, /* 128KB - UART A, B*/ |
| 99 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 100 |
MAP_REGION_FLAT(TEGRA_UARTC_BASE, 0x20000U, /* 128KB - UART C, G */ |
| 101 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 102 |
MAP_REGION_FLAT(TEGRA_UARTD_BASE, 0x30000U, /* 192KB - UART D, E, F */ |
| 103 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 104 |
#endif |
| 105 |
MAP_REGION_FLAT(TEGRA_XUSB_PADCTL_BASE, 0x2000U, /* 8KB */ |
| 106 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 107 |
MAP_REGION_FLAT(TEGRA_GICD_BASE, 0x1000, /* 4KB */ |
| 108 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 109 |
MAP_REGION_FLAT(TEGRA_GICC_BASE, 0x1000, /* 4KB */ |
| 110 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 111 |
MAP_REGION_FLAT(TEGRA_SE0_BASE, 0x1000U, /* 4KB */ |
| 112 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 113 |
MAP_REGION_FLAT(TEGRA_PKA1_BASE, 0x1000U, /* 4KB */ |
| 114 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 115 |
MAP_REGION_FLAT(TEGRA_RNG1_BASE, 0x1000U, /* 4KB */ |
| 116 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 117 |
MAP_REGION_FLAT(TEGRA_HSP_DBELL_BASE, 0x1000U, /* 4KB */ |
| 118 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 119 |
#if ENABLE_CONSOLE_SPE |
| 120 |
MAP_REGION_FLAT(TEGRA_CONSOLE_SPE_BASE, 0x1000U, /* 4KB */ |
| 121 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 122 |
#endif |
| 123 |
MAP_REGION_FLAT(TEGRA_TMRUS_BASE, TEGRA_TMRUS_SIZE, /* 4KB */ |
| 124 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 125 |
MAP_REGION_FLAT(TEGRA_SCRATCH_BASE, 0x1000U, /* 4KB */ |
| 126 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 127 |
MAP_REGION_FLAT(TEGRA_SMMU2_BASE, 0x800000U, /* 8MB */ |
| 128 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 129 |
MAP_REGION_FLAT(TEGRA_SMMU1_BASE, 0x800000U, /* 8MB */ |
| 130 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 131 |
MAP_REGION_FLAT(TEGRA_SMMU0_BASE, 0x800000U, /* 8MB */ |
| 132 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 133 |
MAP_REGION_FLAT(TEGRA_BPMP_IPC_TX_PHYS_BASE, 0x10000U, /* 64KB */ |
| 134 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 135 |
MAP_REGION_FLAT(TEGRA_CAR_RESET_BASE, 0x10000U, /* 64KB */ |
| 136 |
(uint8_t)MT_DEVICE | (uint8_t)MT_RW | (uint8_t)MT_SECURE), |
| 137 |
{0} |
| 138 |
}; |
| 139 |
|
| 140 |
/******************************************************************************* |
| 141 |
* Set up the pagetables as per the platform memory map & initialize the MMU |
| 142 |
******************************************************************************/ |
| 143 |
const mmap_region_t *plat_get_mmio_map(void) |
| 144 |
{ |
| 145 |
/* MMIO space */ |
| 146 |
return tegra_mmap; |
| 147 |
} |
| 148 |
|
| 149 |
/******************************************************************************* |
| 150 |
* Handler to get the System Counter Frequency |
| 151 |
******************************************************************************/ |
| 152 |
uint32_t plat_get_syscnt_freq2(void) |
| 153 |
{ |
| 154 |
return 31250000; |
| 155 |
} |
| 156 |
|
| 157 |
#if !ENABLE_CONSOLE_SPE |
| 158 |
/******************************************************************************* |
| 159 |
* Maximum supported UART controllers |
| 160 |
******************************************************************************/ |
| 161 |
#define TEGRA194_MAX_UART_PORTS 7 |
| 162 |
|
| 163 |
/******************************************************************************* |
| 164 |
* This variable holds the UART port base addresses |
| 165 |
******************************************************************************/ |
| 166 |
static uint32_t tegra194_uart_addresses[TEGRA194_MAX_UART_PORTS + 1] = { |
| 167 |
0, /* undefined - treated as an error case */ |
| 168 |
TEGRA_UARTA_BASE, |
| 169 |
TEGRA_UARTB_BASE, |
| 170 |
TEGRA_UARTC_BASE, |
| 171 |
TEGRA_UARTD_BASE, |
| 172 |
TEGRA_UARTE_BASE, |
| 173 |
TEGRA_UARTF_BASE, |
| 174 |
TEGRA_UARTG_BASE |
| 175 |
}; |
| 176 |
#endif |
| 177 |
|
| 178 |
/******************************************************************************* |
| 179 |
* Enable console corresponding to the console ID |
| 180 |
******************************************************************************/ |
| 181 |
void plat_enable_console(int32_t id) |
| 182 |
{ |
| 183 |
uint32_t console_clock = 0U; |
| 184 |
|
| 185 |
#if ENABLE_CONSOLE_SPE |
| 186 |
static console_t spe_console; |
| 187 |
|
| 188 |
if (id == TEGRA_CONSOLE_SPE_ID) { |
| 189 |
(void)console_spe_register(TEGRA_CONSOLE_SPE_BASE, |
| 190 |
console_clock, |
| 191 |
TEGRA_CONSOLE_BAUDRATE, |
| 192 |
&spe_console); |
| 193 |
console_set_scope(&spe_console, CONSOLE_FLAG_BOOT | |
| 194 |
CONSOLE_FLAG_RUNTIME | CONSOLE_FLAG_CRASH); |
| 195 |
} |
| 196 |
#else |
| 197 |
static console_t uart_console; |
| 198 |
|
| 199 |
if ((id > 0) && (id < TEGRA194_MAX_UART_PORTS)) { |
| 200 |
/* |
| 201 |
* Reference clock used by the FPGAs is a lot slower. |
| 202 |
*/ |
| 203 |
if (tegra_platform_is_fpga()) { |
| 204 |
console_clock = TEGRA_BOOT_UART_CLK_13_MHZ; |
| 205 |
} else { |
| 206 |
console_clock = TEGRA_BOOT_UART_CLK_408_MHZ; |
| 207 |
} |
| 208 |
|
| 209 |
(void)console_16550_register(tegra194_uart_addresses[id], |
| 210 |
console_clock, |
| 211 |
TEGRA_CONSOLE_BAUDRATE, |
| 212 |
&uart_console); |
| 213 |
console_set_scope(&uart_console, CONSOLE_FLAG_BOOT | |
| 214 |
CONSOLE_FLAG_RUNTIME | CONSOLE_FLAG_CRASH); |
| 215 |
} |
| 216 |
#endif |
| 217 |
} |
| 218 |
|
| 219 |
/******************************************************************************* |
| 220 |
* Verify SCR settings |
| 221 |
******************************************************************************/ |
| 222 |
static inline bool tegra194_is_scr_valid(void) |
| 223 |
{ |
| 224 |
uint32_t scr_val; |
| 225 |
bool ret = true; |
| 226 |
|
| 227 |
for (uint8_t i = 0U; i < ARRAY_SIZE(t194_scr_settings); i++) { |
| 228 |
scr_val = mmio_read_32((uintptr_t)t194_scr_settings[i].scr_addr); |
| 229 |
if (scr_val != t194_scr_settings[i].scr_val) { |
| 230 |
ERROR("Mismatch at SCR addr = 0x%x\n", t194_scr_settings[i].scr_addr); |
| 231 |
ret = false; |
| 232 |
} |
| 233 |
} |
| 234 |
return ret; |
| 235 |
} |
| 236 |
|
| 237 |
/******************************************************************************* |
| 238 |
* Handler for early platform setup |
| 239 |
******************************************************************************/ |
| 240 |
void plat_early_platform_setup(void) |
| 241 |
{ |
| 242 |
const plat_params_from_bl2_t *params_from_bl2 = bl31_get_plat_params(); |
| 243 |
uint8_t enable_ccplex_lock_step = params_from_bl2->enable_ccplex_lock_step; |
| 244 |
uint64_t actlr_elx; |
| 245 |
|
| 246 |
/* Verify chip id is t194 */ |
| 247 |
assert(tegra_chipid_is_t194()); |
| 248 |
|
| 249 |
/* Verify SCR settings */ |
| 250 |
if (tegra_platform_is_silicon()) { |
| 251 |
assert(tegra194_is_scr_valid()); |
| 252 |
} |
| 253 |
|
| 254 |
/* sanity check MCE firmware compatibility */ |
| 255 |
mce_verify_firmware_version(); |
| 256 |
|
| 257 |
#if ENABLE_FEAT_RAS |
| 258 |
/* Enable Uncorrectable RAS error */ |
| 259 |
tegra194_ras_enable(); |
| 260 |
#endif |
| 261 |
|
| 262 |
/* |
| 263 |
* Program XUSB STREAMIDs |
| 264 |
* ====================== |
| 265 |
* T19x XUSB has support for XUSB virtualization. It will have one |
| 266 |
* physical function (PF) and four Virtual function (VF) |
| 267 |
* |
| 268 |
* There were below two SIDs for XUSB until T186. |
| 269 |
* 1) #define TEGRA_SID_XUSB_HOST 0x1bU |
| 270 |
* 2) #define TEGRA_SID_XUSB_DEV 0x1cU |
| 271 |
* |
| 272 |
* We have below four new SIDs added for VF(s) |
| 273 |
* 3) #define TEGRA_SID_XUSB_VF0 0x5dU |
| 274 |
* 4) #define TEGRA_SID_XUSB_VF1 0x5eU |
| 275 |
* 5) #define TEGRA_SID_XUSB_VF2 0x5fU |
| 276 |
* 6) #define TEGRA_SID_XUSB_VF3 0x60U |
| 277 |
* |
| 278 |
* When virtualization is enabled then we have to disable SID override |
| 279 |
* and program above SIDs in below newly added SID registers in XUSB |
| 280 |
* PADCTL MMIO space. These registers are TZ protected and so need to |
| 281 |
* be done in ATF. |
| 282 |
* a) #define XUSB_PADCTL_HOST_AXI_STREAMID_PF_0 (0x136cU) |
| 283 |
* b) #define XUSB_PADCTL_DEV_AXI_STREAMID_PF_0 (0x139cU) |
| 284 |
* c) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_0 (0x1370U) |
| 285 |
* d) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_1 (0x1374U) |
| 286 |
* e) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_2 (0x1378U) |
| 287 |
* f) #define XUSB_PADCTL_HOST_AXI_STREAMID_VF_3 (0x137cU) |
| 288 |
* |
| 289 |
* This change disables SID override and programs XUSB SIDs in |
| 290 |
* above registers to support both virtualization and |
| 291 |
* non-virtualization platforms |
| 292 |
*/ |
| 293 |
if (tegra_platform_is_silicon() || tegra_platform_is_fpga()) { |
| 294 |
|
| 295 |
mmio_write_32(TEGRA_XUSB_PADCTL_BASE + |
| 296 |
XUSB_PADCTL_HOST_AXI_STREAMID_PF_0, TEGRA_SID_XUSB_HOST); |
| 297 |
assert(mmio_read_32(TEGRA_XUSB_PADCTL_BASE + |
| 298 |
XUSB_PADCTL_HOST_AXI_STREAMID_PF_0) == TEGRA_SID_XUSB_HOST); |
| 299 |
mmio_write_32(TEGRA_XUSB_PADCTL_BASE + |
| 300 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_0, TEGRA_SID_XUSB_VF0); |
| 301 |
assert(mmio_read_32(TEGRA_XUSB_PADCTL_BASE + |
| 302 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_0) == TEGRA_SID_XUSB_VF0); |
| 303 |
mmio_write_32(TEGRA_XUSB_PADCTL_BASE + |
| 304 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_1, TEGRA_SID_XUSB_VF1); |
| 305 |
assert(mmio_read_32(TEGRA_XUSB_PADCTL_BASE + |
| 306 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_1) == TEGRA_SID_XUSB_VF1); |
| 307 |
mmio_write_32(TEGRA_XUSB_PADCTL_BASE + |
| 308 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_2, TEGRA_SID_XUSB_VF2); |
| 309 |
assert(mmio_read_32(TEGRA_XUSB_PADCTL_BASE + |
| 310 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_2) == TEGRA_SID_XUSB_VF2); |
| 311 |
mmio_write_32(TEGRA_XUSB_PADCTL_BASE + |
| 312 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_3, TEGRA_SID_XUSB_VF3); |
| 313 |
assert(mmio_read_32(TEGRA_XUSB_PADCTL_BASE + |
| 314 |
XUSB_PADCTL_HOST_AXI_STREAMID_VF_3) == TEGRA_SID_XUSB_VF3); |
| 315 |
mmio_write_32(TEGRA_XUSB_PADCTL_BASE + |
| 316 |
XUSB_PADCTL_DEV_AXI_STREAMID_PF_0, TEGRA_SID_XUSB_DEV); |
| 317 |
assert(mmio_read_32(TEGRA_XUSB_PADCTL_BASE + |
| 318 |
XUSB_PADCTL_DEV_AXI_STREAMID_PF_0) == TEGRA_SID_XUSB_DEV); |
| 319 |
} |
| 320 |
|
| 321 |
/* |
| 322 |
* Enable dual execution optimized translations for all ELx. |
| 323 |
*/ |
| 324 |
if (enable_ccplex_lock_step != 0U) { |
| 325 |
actlr_elx = read_actlr_el3(); |
| 326 |
actlr_elx |= DENVER_CPU_ENABLE_DUAL_EXEC_EL3; |
| 327 |
write_actlr_el3(actlr_elx); |
| 328 |
/* check if the bit is actually set */ |
| 329 |
assert((read_actlr_el3() & DENVER_CPU_ENABLE_DUAL_EXEC_EL3) != 0ULL); |
| 330 |
|
| 331 |
actlr_elx = read_actlr_el2(); |
| 332 |
actlr_elx |= DENVER_CPU_ENABLE_DUAL_EXEC_EL2; |
| 333 |
write_actlr_el2(actlr_elx); |
| 334 |
/* check if the bit is actually set */ |
| 335 |
assert((read_actlr_el2() & DENVER_CPU_ENABLE_DUAL_EXEC_EL2) != 0ULL); |
| 336 |
|
| 337 |
actlr_elx = read_actlr_el1(); |
| 338 |
actlr_elx |= DENVER_CPU_ENABLE_DUAL_EXEC_EL1; |
| 339 |
write_actlr_el1(actlr_elx); |
| 340 |
/* check if the bit is actually set */ |
| 341 |
assert((read_actlr_el1() & DENVER_CPU_ENABLE_DUAL_EXEC_EL1) != 0ULL); |
| 342 |
} |
| 343 |
} |
| 344 |
|
| 345 |
/* Secure IRQs for Tegra194 */ |
| 346 |
static const interrupt_prop_t tegra194_interrupt_props[] = { |
| 347 |
INTR_PROP_DESC(TEGRA_SDEI_SGI_PRIVATE, PLAT_SDEI_CRITICAL_PRI, |
| 348 |
GICV2_INTR_GROUP0, GIC_INTR_CFG_EDGE), |
| 349 |
INTR_PROP_DESC(TEGRA194_TOP_WDT_IRQ, PLAT_TEGRA_WDT_PRIO, |
| 350 |
GICV2_INTR_GROUP0, GIC_INTR_CFG_EDGE) |
| 351 |
}; |
| 352 |
|
| 353 |
/******************************************************************************* |
| 354 |
* Initialize the GIC and SGIs |
| 355 |
******************************************************************************/ |
| 356 |
void plat_gic_setup(void) |
| 357 |
{ |
| 358 |
tegra_gic_setup(tegra194_interrupt_props, ARRAY_SIZE(tegra194_interrupt_props)); |
| 359 |
tegra_gic_init(); |
| 360 |
|
| 361 |
/* |
| 362 |
* Initialize the FIQ handler |
| 363 |
*/ |
| 364 |
tegra_fiq_handler_setup(); |
| 365 |
} |
| 366 |
|
| 367 |
/******************************************************************************* |
| 368 |
* Return pointer to the BL31 params from previous bootloader |
| 369 |
******************************************************************************/ |
| 370 |
struct tegra_bl31_params *plat_get_bl31_params(void) |
| 371 |
{ |
| 372 |
uint64_t val; |
| 373 |
|
| 374 |
val = (mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_BL31_PARAMS_HI_ADDR) & |
| 375 |
SCRATCH_BL31_PARAMS_HI_ADDR_MASK) >> SCRATCH_BL31_PARAMS_HI_ADDR_SHIFT; |
| 376 |
val <<= 32; |
| 377 |
val |= mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_BL31_PARAMS_LO_ADDR); |
| 378 |
|
| 379 |
return (struct tegra_bl31_params *)(uintptr_t)val; |
| 380 |
} |
| 381 |
|
| 382 |
/******************************************************************************* |
| 383 |
* Return pointer to the BL31 platform params from previous bootloader |
| 384 |
******************************************************************************/ |
| 385 |
plat_params_from_bl2_t *plat_get_bl31_plat_params(void) |
| 386 |
{ |
| 387 |
uint64_t val; |
| 388 |
|
| 389 |
val = (mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_BL31_PLAT_PARAMS_HI_ADDR) & |
| 390 |
SCRATCH_BL31_PLAT_PARAMS_HI_ADDR_MASK) >> SCRATCH_BL31_PLAT_PARAMS_HI_ADDR_SHIFT; |
| 391 |
val <<= 32; |
| 392 |
val |= mmio_read_32(TEGRA_SCRATCH_BASE + SCRATCH_BL31_PLAT_PARAMS_LO_ADDR); |
| 393 |
|
| 394 |
return (plat_params_from_bl2_t *)(uintptr_t)val; |
| 395 |
} |
| 396 |
|
| 397 |
/******************************************************************************* |
| 398 |
* Handler for late platform setup |
| 399 |
******************************************************************************/ |
| 400 |
void plat_late_platform_setup(void) |
| 401 |
{ |
| 402 |
#if ENABLE_STRICT_CHECKING_MODE |
| 403 |
/* |
| 404 |
* Enable strict checking after programming the GSC for |
| 405 |
* enabling TZSRAM and TZDRAM |
| 406 |
*/ |
| 407 |
mce_enable_strict_checking(); |
| 408 |
mce_verify_strict_checking(); |
| 409 |
#endif |
| 410 |
} |
| 411 |
|
| 412 |
/******************************************************************************* |
| 413 |
* Handler to indicate support for System Suspend |
| 414 |
******************************************************************************/ |
| 415 |
bool plat_supports_system_suspend(void) |
| 416 |
{ |
| 417 |
return true; |
| 418 |
} |
| 419 |
|
| 420 |
/******************************************************************************* |
| 421 |
* Platform specific runtime setup. |
| 422 |
******************************************************************************/ |
| 423 |
void plat_runtime_setup(void) |
| 424 |
{ |
| 425 |
/* |
| 426 |
* During cold boot, it is observed that the arbitration |
| 427 |
* bit is set in the Memory controller leading to false |
| 428 |
* error interrupts in the non-secure world. To avoid |
| 429 |
* this, clean the interrupt status register before |
| 430 |
* booting into the non-secure world |
| 431 |
*/ |
| 432 |
tegra_memctrl_clear_pending_interrupts(); |
| 433 |
|
| 434 |
/* |
| 435 |
* During boot, USB3 and flash media (SDMMC/SATA) devices need |
| 436 |
* access to IRAM. Because these clients connect to the MC and |
| 437 |
* do not have a direct path to the IRAM, the MC implements AHB |
| 438 |
* redirection during boot to allow path to IRAM. In this mode |
| 439 |
* accesses to a programmed memory address aperture are directed |
| 440 |
* to the AHB bus, allowing access to the IRAM. This mode must be |
| 441 |
* disabled before we jump to the non-secure world. |
| 442 |
*/ |
| 443 |
tegra_memctrl_disable_ahb_redirection(); |
| 444 |
|
| 445 |
/* |
| 446 |
* Verify the integrity of the previously configured SMMU(s) settings |
| 447 |
*/ |
| 448 |
tegra_smmu_verify(); |
| 449 |
} |