| 1 |
# Makefile for ATmegaBOOT |
| 2 |
# E.Lins, 18.7.2005 |
| 3 |
# |
| 4 |
# Instructions |
| 5 |
# |
| 6 |
# To make bootloader .hex file: |
| 7 |
# make diecimila |
| 8 |
# make lilypad |
| 9 |
# make ng |
| 10 |
# etc... |
| 11 |
# |
| 12 |
# To burn bootloader .hex file: |
| 13 |
# make diecimila_isp |
| 14 |
# make lilypad_isp |
| 15 |
# make ng_isp |
| 16 |
# etc... |
| 17 |
|
| 18 |
# program name should not be changed... |
| 19 |
PROGRAM = optiboot |
| 20 |
|
| 21 |
# The default behavior is to build using tools that are in the users |
| 22 |
# current path variables, but we can also build using an installed |
| 23 |
# Arduino user IDE setup, or the Arduino source tree. |
| 24 |
# Uncomment this next lines to build within the arduino environment, |
| 25 |
# using the arduino-included avrgcc toolset (mac and pc) |
| 26 |
# ENV ?= arduino |
| 27 |
# ENV ?= arduinodev |
| 28 |
# OS ?= macosx |
| 29 |
# OS ?= windows |
| 30 |
|
| 31 |
|
| 32 |
# enter the parameters for the avrdude isp tool |
| 33 |
ISPTOOL = stk500v2 |
| 34 |
ISPPORT = usb |
| 35 |
ISPSPEED = -b 115200 |
| 36 |
|
| 37 |
MCU_TARGET = atmega168 |
| 38 |
LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe |
| 39 |
|
| 40 |
# Build environments |
| 41 |
# Start of some ugly makefile-isms to allow optiboot to be built |
| 42 |
# in several different environments. See the README.TXT file for |
| 43 |
# details. |
| 44 |
|
| 45 |
# default |
| 46 |
fixpath = $(1) |
| 47 |
|
| 48 |
ifeq ($(ENV), arduino) |
| 49 |
# For Arduino, we assume that we're connected to the optiboot directory |
| 50 |
# included with the arduino distribution, which means that the full set |
| 51 |
# of avr-tools are "right up there" in standard places. |
| 52 |
TOOLROOT = ../../../tools |
| 53 |
GCCROOT = $(TOOLROOT)/avr/bin/ |
| 54 |
AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf |
| 55 |
|
| 56 |
ifeq ($(OS), windows) |
| 57 |
# On windows, SOME of the tool paths will need to have backslashes instead |
| 58 |
# of forward slashes (because they use windows cmd.exe for execution instead |
| 59 |
# of a unix/mingw shell?) We also have to ensure that a consistent shell |
| 60 |
# is used even if a unix shell is installed (ie as part of WINAVR) |
| 61 |
fixpath = $(subst /,\,$1) |
| 62 |
SHELL = cmd.exe |
| 63 |
endif |
| 64 |
|
| 65 |
else ifeq ($(ENV), arduinodev) |
| 66 |
# Arduino IDE source code environment. Use the unpacked compilers created |
| 67 |
# by the build (you'll need to do "ant build" first.) |
| 68 |
ifeq ($(OS), macosx) |
| 69 |
TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools |
| 70 |
endif |
| 71 |
ifeq ($(OS), windows) |
| 72 |
TOOLROOT = ../../../../build/windows/work/hardware/tools |
| 73 |
endif |
| 74 |
|
| 75 |
GCCROOT = $(TOOLROOT)/avr/bin/ |
| 76 |
AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf |
| 77 |
|
| 78 |
else |
| 79 |
GCCROOT = |
| 80 |
AVRDUDE_CONF = |
| 81 |
endif |
| 82 |
# |
| 83 |
# End of build environment code. |
| 84 |
|
| 85 |
|
| 86 |
# the efuse should really be 0xf8; since, however, only the lower |
| 87 |
# three bits of that byte are used on the atmega168, avrdude gets |
| 88 |
# confused if you specify 1's for the higher bits, see: |
| 89 |
# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ |
| 90 |
# |
| 91 |
# similarly, the lock bits should be 0xff instead of 0x3f (to |
| 92 |
# unlock the bootloader section) and 0xcf instead of 0x2f (to |
| 93 |
# lock it), but since the high two bits of the lock byte are |
| 94 |
# unused, avrdude would get confused. |
| 95 |
|
| 96 |
ISPFUSES = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ |
| 97 |
-p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ |
| 98 |
-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \ |
| 99 |
-U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m |
| 100 |
ISPFLASH = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ |
| 101 |
-p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ |
| 102 |
-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m |
| 103 |
|
| 104 |
STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" |
| 105 |
STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ |
| 106 |
-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt |
| 107 |
STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt |
| 108 |
|
| 109 |
OBJ = $(PROGRAM).o |
| 110 |
OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls |
| 111 |
|
| 112 |
DEFS = |
| 113 |
LIBS = |
| 114 |
|
| 115 |
CC = $(GCCROOT)avr-gcc |
| 116 |
|
| 117 |
# Override is only needed by avr-lib build system. |
| 118 |
|
| 119 |
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) |
| 120 |
override LDFLAGS = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib |
| 121 |
|
| 122 |
OBJCOPY = $(GCCROOT)avr-objcopy |
| 123 |
OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump) |
| 124 |
|
| 125 |
SIZE = $(GCCROOT)avr-size |
| 126 |
|
| 127 |
# Test platforms |
| 128 |
# Virtual boot block test |
| 129 |
virboot328: TARGET = atmega328 |
| 130 |
virboot328: MCU_TARGET = atmega328p |
| 131 |
virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT' |
| 132 |
virboot328: AVR_FREQ = 16000000L |
| 133 |
virboot328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe |
| 134 |
virboot328: $(PROGRAM)_atmega328.hex |
| 135 |
virboot328: $(PROGRAM)_atmega328.lst |
| 136 |
|
| 137 |
# 20MHz clocked platforms |
| 138 |
# |
| 139 |
# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) |
| 140 |
# |
| 141 |
|
| 142 |
pro20: TARGET = pro_20mhz |
| 143 |
pro20: MCU_TARGET = atmega168 |
| 144 |
pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 145 |
pro20: AVR_FREQ = 20000000L |
| 146 |
pro20: $(PROGRAM)_pro_20mhz.hex |
| 147 |
pro20: $(PROGRAM)_pro_20mhz.lst |
| 148 |
|
| 149 |
pro20_isp: pro20 |
| 150 |
pro20_isp: TARGET = pro_20mhz |
| 151 |
# 2.7V brownout |
| 152 |
pro20_isp: HFUSE = DD |
| 153 |
# Full swing xtal (20MHz) 258CK/14CK+4.1ms |
| 154 |
pro20_isp: LFUSE = C6 |
| 155 |
# 512 byte boot |
| 156 |
pro20_isp: EFUSE = 04 |
| 157 |
pro20_isp: isp |
| 158 |
|
| 159 |
# 16MHz clocked platforms |
| 160 |
# |
| 161 |
# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) |
| 162 |
# |
| 163 |
|
| 164 |
pro16: TARGET = pro_16MHz |
| 165 |
pro16: MCU_TARGET = atmega168 |
| 166 |
pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 167 |
pro16: AVR_FREQ = 16000000L |
| 168 |
pro16: $(PROGRAM)_pro_16MHz.hex |
| 169 |
pro16: $(PROGRAM)_pro_16MHz.lst |
| 170 |
|
| 171 |
pro16_isp: pro16 |
| 172 |
pro16_isp: TARGET = pro_16MHz |
| 173 |
# 2.7V brownout |
| 174 |
pro16_isp: HFUSE = DD |
| 175 |
# Full swing xtal (20MHz) 258CK/14CK+4.1ms |
| 176 |
pro16_isp: LFUSE = C6 |
| 177 |
# 512 byte boot |
| 178 |
pro16_isp: EFUSE = 04 |
| 179 |
pro16_isp: isp |
| 180 |
|
| 181 |
# Diecimila, Duemilanove with m168, and NG use identical bootloaders |
| 182 |
# Call it "atmega168" for generality and clarity, keep "diecimila" for |
| 183 |
# backward compatibility of makefile |
| 184 |
# |
| 185 |
atmega168: TARGET = atmega168 |
| 186 |
atmega168: MCU_TARGET = atmega168 |
| 187 |
atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 188 |
atmega168: AVR_FREQ = 16000000L |
| 189 |
atmega168: $(PROGRAM)_atmega168.hex |
| 190 |
atmega168: $(PROGRAM)_atmega168.lst |
| 191 |
|
| 192 |
atmega168_isp: atmega168 |
| 193 |
atmega168_isp: TARGET = atmega168 |
| 194 |
# 2.7V brownout |
| 195 |
atmega168_isp: HFUSE = DD |
| 196 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 197 |
atmega168_isp: LFUSE = FF |
| 198 |
# 512 byte boot |
| 199 |
atmega168_isp: EFUSE = 04 |
| 200 |
atmega168_isp: isp |
| 201 |
|
| 202 |
diecimila: TARGET = diecimila |
| 203 |
diecimila: MCU_TARGET = atmega168 |
| 204 |
diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 205 |
diecimila: AVR_FREQ = 16000000L |
| 206 |
diecimila: $(PROGRAM)_diecimila.hex |
| 207 |
diecimila: $(PROGRAM)_diecimila.lst |
| 208 |
|
| 209 |
diecimila_isp: diecimila |
| 210 |
diecimila_isp: TARGET = diecimila |
| 211 |
# 2.7V brownout |
| 212 |
diecimila_isp: HFUSE = DD |
| 213 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 214 |
diecimila_isp: LFUSE = FF |
| 215 |
# 512 byte boot |
| 216 |
diecimila_isp: EFUSE = 04 |
| 217 |
diecimila_isp: isp |
| 218 |
|
| 219 |
atmega328: TARGET = atmega328 |
| 220 |
atmega328: MCU_TARGET = atmega328p |
| 221 |
atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 222 |
atmega328: AVR_FREQ = 16000000L |
| 223 |
atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe |
| 224 |
atmega328: $(PROGRAM)_atmega328.hex |
| 225 |
atmega328: $(PROGRAM)_atmega328.lst |
| 226 |
|
| 227 |
atmega328_isp: atmega328 |
| 228 |
atmega328_isp: TARGET = atmega328 |
| 229 |
atmega328_isp: MCU_TARGET = atmega328p |
| 230 |
# 512 byte boot, SPIEN |
| 231 |
atmega328_isp: HFUSE = DE |
| 232 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 233 |
atmega328_isp: LFUSE = FF |
| 234 |
# 2.7V brownout |
| 235 |
atmega328_isp: EFUSE = 05 |
| 236 |
atmega328_isp: isp |
| 237 |
|
| 238 |
# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions |
| 239 |
# |
| 240 |
sanguino: TARGET = atmega644p |
| 241 |
sanguino: MCU_TARGET = atmega644p |
| 242 |
sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' |
| 243 |
sanguino: AVR_FREQ = 16000000L |
| 244 |
sanguino: LDSECTIONS = -Wl,--section-start=.text=0xfc00 |
| 245 |
sanguino: $(PROGRAM)_atmega644p.hex |
| 246 |
sanguino: $(PROGRAM)_atmega644p.lst |
| 247 |
|
| 248 |
sanguino_isp: sanguino |
| 249 |
sanguino_isp: TARGET = atmega644p |
| 250 |
sanguino_isp: MCU_TARGET = atmega644p |
| 251 |
# 1024 byte boot |
| 252 |
sanguino_isp: HFUSE = DE |
| 253 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 254 |
sanguino_isp: LFUSE = FF |
| 255 |
# 2.7V brownout |
| 256 |
sanguino_isp: EFUSE = 05 |
| 257 |
sanguino_isp: isp |
| 258 |
|
| 259 |
# Mega has a minimum boot size of 1024 bytes, so enable extra functions |
| 260 |
#mega: TARGET = atmega1280 |
| 261 |
mega: MCU_TARGET = atmega1280 |
| 262 |
mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' |
| 263 |
mega: AVR_FREQ = 16000000L |
| 264 |
mega: LDSECTIONS = -Wl,--section-start=.text=0x1fc00 |
| 265 |
mega: $(PROGRAM)_atmega1280.hex |
| 266 |
mega: $(PROGRAM)_atmega1280.lst |
| 267 |
|
| 268 |
mega_isp: mega |
| 269 |
mega_isp: TARGET = atmega1280 |
| 270 |
mega_isp: MCU_TARGET = atmega1280 |
| 271 |
# 1024 byte boot |
| 272 |
mega_isp: HFUSE = DE |
| 273 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 274 |
mega_isp: LFUSE = FF |
| 275 |
# 2.7V brownout |
| 276 |
mega_isp: EFUSE = 05 |
| 277 |
mega_isp: isp |
| 278 |
|
| 279 |
# ATmega8 |
| 280 |
# |
| 281 |
atmega8: TARGET = atmega8 |
| 282 |
atmega8: MCU_TARGET = atmega8 |
| 283 |
atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 284 |
atmega8: AVR_FREQ = 16000000L |
| 285 |
atmega8: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe |
| 286 |
atmega8: $(PROGRAM)_atmega8.hex |
| 287 |
atmega8: $(PROGRAM)_atmega8.lst |
| 288 |
|
| 289 |
atmega8_isp: atmega8 |
| 290 |
atmega8_isp: TARGET = atmega8 |
| 291 |
atmega8_isp: MCU_TARGET = atmega8 |
| 292 |
# SPIEN, CKOPT, Bootsize=512B |
| 293 |
atmega8_isp: HFUSE = CC |
| 294 |
# 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms |
| 295 |
atmega8_isp: LFUSE = BF |
| 296 |
atmega8_isp: isp |
| 297 |
|
| 298 |
# ATmega88 |
| 299 |
# |
| 300 |
atmega88: TARGET = atmega88 |
| 301 |
atmega88: MCU_TARGET = atmega88 |
| 302 |
atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 303 |
atmega88: AVR_FREQ = 16000000L |
| 304 |
atmega88: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe |
| 305 |
atmega88: $(PROGRAM)_atmega88.hex |
| 306 |
atmega88: $(PROGRAM)_atmega88.lst |
| 307 |
|
| 308 |
atmega88_isp: atmega88 |
| 309 |
atmega88_isp: TARGET = atmega88 |
| 310 |
atmega88_isp: MCU_TARGET = atmega88 |
| 311 |
# 2.7V brownout |
| 312 |
atmega88_isp: HFUSE = DD |
| 313 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 314 |
atemga88_isp: LFUSE = FF |
| 315 |
# 512 byte boot |
| 316 |
atmega88_isp: EFUSE = 04 |
| 317 |
atmega88_isp: isp |
| 318 |
|
| 319 |
|
| 320 |
# 8MHz clocked platforms |
| 321 |
# |
| 322 |
# These are capable of 115200 baud |
| 323 |
# |
| 324 |
|
| 325 |
lilypad: TARGET = lilypad |
| 326 |
lilypad: MCU_TARGET = atmega168 |
| 327 |
lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 328 |
lilypad: AVR_FREQ = 8000000L |
| 329 |
lilypad: $(PROGRAM)_lilypad.hex |
| 330 |
lilypad: $(PROGRAM)_lilypad.lst |
| 331 |
|
| 332 |
lilypad_isp: lilypad |
| 333 |
lilypad_isp: TARGET = lilypad |
| 334 |
# 2.7V brownout |
| 335 |
lilypad_isp: HFUSE = DD |
| 336 |
# Internal 8MHz osc (8MHz) Slow rising power |
| 337 |
lilypad_isp: LFUSE = E2 |
| 338 |
# 512 byte boot |
| 339 |
lilypad_isp: EFUSE = 04 |
| 340 |
lilypad_isp: isp |
| 341 |
|
| 342 |
lilypad_resonator: TARGET = lilypad_resonator |
| 343 |
lilypad_resonator: MCU_TARGET = atmega168 |
| 344 |
lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 345 |
lilypad_resonator: AVR_FREQ = 8000000L |
| 346 |
lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex |
| 347 |
lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst |
| 348 |
|
| 349 |
lilypad_resonator_isp: lilypad_resonator |
| 350 |
lilypad_resonator_isp: TARGET = lilypad_resonator |
| 351 |
# 2.7V brownout |
| 352 |
lilypad_resonator_isp: HFUSE = DD |
| 353 |
# Full swing xtal (20MHz) 258CK/14CK+4.1ms |
| 354 |
lilypad_resonator_isp: LFUSE = C6 |
| 355 |
# 512 byte boot |
| 356 |
lilypad_resonator_isp: EFUSE = 04 |
| 357 |
lilypad_resonator_isp: isp |
| 358 |
|
| 359 |
pro8: TARGET = pro_8MHz |
| 360 |
pro8: MCU_TARGET = atmega168 |
| 361 |
pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 362 |
pro8: AVR_FREQ = 8000000L |
| 363 |
pro8: $(PROGRAM)_pro_8MHz.hex |
| 364 |
pro8: $(PROGRAM)_pro_8MHz.lst |
| 365 |
|
| 366 |
pro8_isp: pro8 |
| 367 |
pro8_isp: TARGET = pro_8MHz |
| 368 |
# 2.7V brownout |
| 369 |
pro8_isp: HFUSE = DD |
| 370 |
# Full swing xtal (20MHz) 258CK/14CK+4.1ms |
| 371 |
pro8_isp: LFUSE = C6 |
| 372 |
# 512 byte boot |
| 373 |
pro8_isp: EFUSE = 04 |
| 374 |
pro8_isp: isp |
| 375 |
|
| 376 |
atmega328_pro8: TARGET = atmega328_pro_8MHz |
| 377 |
atmega328_pro8: MCU_TARGET = atmega328p |
| 378 |
atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
| 379 |
atmega328_pro8: AVR_FREQ = 8000000L |
| 380 |
atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe |
| 381 |
atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex |
| 382 |
atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst |
| 383 |
|
| 384 |
atmega328_pro8_isp: atmega328_pro8 |
| 385 |
atmega328_pro8_isp: TARGET = atmega328_pro_8MHz |
| 386 |
atmega328_pro8_isp: MCU_TARGET = atmega328p |
| 387 |
# 512 byte boot, SPIEN |
| 388 |
atmega328_pro8_isp: HFUSE = DE |
| 389 |
# Low power xtal (16MHz) 16KCK/14CK+65ms |
| 390 |
atmega328_pro8_isp: LFUSE = FF |
| 391 |
# 2.7V brownout |
| 392 |
atmega328_pro8_isp: EFUSE = 05 |
| 393 |
atmega328_pro8_isp: isp |
| 394 |
|
| 395 |
# 1MHz clocked platforms |
| 396 |
# |
| 397 |
# These are capable of 9600 baud |
| 398 |
# |
| 399 |
|
| 400 |
luminet: TARGET = luminet |
| 401 |
luminet: MCU_TARGET = attiny84 |
| 402 |
luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' |
| 403 |
luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' |
| 404 |
luminet: AVR_FREQ = 1000000L |
| 405 |
luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe |
| 406 |
luminet: $(PROGRAM)_luminet.hex |
| 407 |
luminet: $(PROGRAM)_luminet.lst |
| 408 |
|
| 409 |
luminet_isp: luminet |
| 410 |
luminet_isp: TARGET = luminet |
| 411 |
luminet_isp: MCU_TARGET = attiny84 |
| 412 |
# Brownout disabled |
| 413 |
luminet_isp: HFUSE = DF |
| 414 |
# 1MHz internal oscillator, slowly rising power |
| 415 |
luminet_isp: LFUSE = 62 |
| 416 |
# Self-programming enable |
| 417 |
luminet_isp: EFUSE = FE |
| 418 |
luminet_isp: isp |
| 419 |
|
| 420 |
# |
| 421 |
# Generic build instructions |
| 422 |
# |
| 423 |
# |
| 424 |
|
| 425 |
isp: $(TARGET) |
| 426 |
$(ISPFUSES) |
| 427 |
$(ISPFLASH) |
| 428 |
|
| 429 |
isp-stk500: $(PROGRAM)_$(TARGET).hex |
| 430 |
$(STK500-1) |
| 431 |
$(STK500-2) |
| 432 |
|
| 433 |
%.elf: $(OBJ) |
| 434 |
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) |
| 435 |
$(SIZE) $@ |
| 436 |
|
| 437 |
clean: |
| 438 |
rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex |
| 439 |
|
| 440 |
%.lst: %.elf |
| 441 |
$(OBJDUMP) -h -S $< > $@ |
| 442 |
|
| 443 |
%.hex: %.elf |
| 444 |
$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@ |
| 445 |
|
| 446 |
%.srec: %.elf |
| 447 |
$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@ |
| 448 |
|
| 449 |
%.bin: %.elf |
| 450 |
$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@ |