Debian Codegraph @

debian/aoetools.default

raw
1 # Configuration file for aoetools.
2
3 ## NOTE: This file is NOT READ under systemd.
4
5 ## If you need to restrict the used interfaces, please read
6 ## /usr/lib/modules-load.d/aoetools.conf
7 ## Filesystems can be mounted using /etc/fstab.
8
9 # WARNING: All the following settings are interpolated in the shell.
10 # Make sure to not configure anything that is shell syntax, e.g.
11 # semicolon.
12
13 # Enter the list of network interfaces to restrict the AoE discovery to,
14 # separated by spaces. It can be blank, i.e. "", if you want to run AoE
15 # over all the interfaces. If you do not want AoE discovery at all,
16 # enter "none" as the list of interfaces.
17 #
18 # If neither the aoe_iflist module load option nor this list of
19 # interfaces are used, the aoe driver will use any network interface for
20 # AoE traffic.
21 INTERFACES='none'
22
23 # Enter a list of RAID arrays to be activated after AoE volumes are
24 # ready, separated by spaces, without the /dev/ prefix and quoted. It
25 # may be blank.
26 # Example:
27 #RAID_ARRAYS='md0 md1'
28 RAID_ARRAYS=''
29
30 # Enter a list of LVM2 volume groups to be activated after AoE volumes
31 # are ready, separated by spaces.
32 # It can be blank, i.e., ''.
33 LVMGROUPS=''
34
35 # Enter a list of file systems to be mounted over AoE. Note that those
36 # entries listed in /etc/fstab that contain "/dev/etherd/" will be
37 # automatically added to this list.
38 AOEMOUNTS=''