Debian Codegraph @

amiga/smakefile

raw
1 #===========================================================================
2 # Makefile for Zip, ZipNote, ZipCloak, ZipSplit AMIGA SAS/C Version 6.58
3 # Version: 2.3 last revised: 07 Jan 2007
4 #===========================================================================
5 # -John Bush, <[email protected]>
6 # or: <[email protected]>
7
8 # updated for SAS/C Version 6.56+ and AmigaDOS 3.1 (V40)
9 # by Haidinger Walter, <[email protected]>
10
11 # additional supplements and maintenance by Paul Kienitz
12
13 # This makefile should work with at least AmigaDOS 2.04 (V37) (not tested)
14 # and will probably not work with AmigaDOS 1.3 (V34)
15
16 # If you have any improvements, critics or else please feel free to mail.
17 # Any response is appreciated. Haidinger Walter <[email protected]>
18
19 # Available targets:
20 # all builds all executeables below
21 # zip builds zip executeable
22 # zipsplit builds zipsplit executeable
23 # zipcloak builds zipcloak executeable
24 # zipnote builds zipnote executeable
25 # ziplm builds low memory version of zip executable
26 # clean remove all files created by the compilation
27 # spotless like clean target but removes binaries too
28
29
30 ##########################
31 # USER MACRO DEFINITIONS #
32 ##########################
33
34 # *** NOTE ***
35 # The assembly version is not implemented yet.
36 # (Un)commenting the assembler macros has no effect unless the
37 # file dependencies are changed too.
38 # Most of the amiga/*.a files do not assmble with 68000 instructions.
39 # Any help is appreciated, of course.
40
41 # Set the processor to generate code for.
42 # Compiler: ANY 68000 68010 68020 68030 68040 68060
43 # Assembler: 0 0 1 2 3 4 n/a
44 # Defaults: ANY and 0
45 #
46 CUSECPU = ANY
47 AUSECPU = 0
48
49 # UNCOMMENT to use 68020 instructions in the assembly version of deflate.o
50 # Only use if code is generated for 68020 or higher processors above.
51 # Note: You could use CPUTEST too to enable runtime cpu detection.
52 # However, it is not recommended since both 68000 and 68020 code will be
53 # included which would be an unnecessary increase in size.
54 # (see amiga/deflate.a for more information)
55 #
56 #AUSE020 = CPU020
57
58 # To disable the assembler replacements and use the standard C source,
59 # you have to change the Zip and ZipLM dependencies. See below for details.
60 # (remember that assembler use is *not* implemented yet)
61
62 # Uncomment both CUTIL and LUTIL to make use of utility.library of OS 2.04+
63 # The utility.library is *not* used for UnZipSFX to ensure maximum portability
64 # between the different Amiga systems (minimal config: 68000 and OS 1.2).
65 # You can change this by adding the $(LUTIL) macro in the UnZipSFX linking
66 # rules (See below: Final output targets, UnZipSFX:).
67 # WARNINGS when using the utility library:
68 # 1. All Executables will *only* work with AmigaDOS 2.04 (v37) or higher.
69 # 2. You *need not* compile/link with short-integers using the
70 # utility.library. It will crash your machine. See Libraries below.
71 #
72 # Default: commented (not used)
73 #
74 #CUTIL = UTILLIB DEFINE=_UTILLIB
75 #LUTIL = WITH SC:LIB/utillib.with # include necessary linker defines
76 # Choose one stack-handling method (default=faster)
77 # StackExtend: Dynamic runtime stack extension. You won't notice stack overflows.
78 # StackCheck: On a stack overflow a requester appears which allows you to exit.
79 # Note that either stack watching will slow down your executable because of the
80 # extra code run on each function entry. On the other hand, you won't crash
81 # anymore due to stack overflows. However, you should not have *any* stack
82 # problems with Info-ZIP programs if you raise your stack to 10000 (which I'd
83 # recommend as a minimum default stack for all applications) or more using the
84 # shell stack command. Type 'Stack 20000' or add it to your S:Shell-Startup.
85 # BTW: Typing 'Stack' prints your current stack size.
86 #
87 CSTACK = NOSTACKCHECK STACKEXTEND # slow, but always works
88 #CSTACK = STACKCHECK NOSTACKEXTEND # slow, requester & graceful exit
89 #CSTACK = NOSTACKCHECK NOSTACKEXTEND # faster but relies on larger stack (>=10K)
90
91
92 #
93 # LIBRARIES
94 # ---------
95
96 # Choose one DATAOPTS , SASLIB , ASMOPTS and LSTARTUP
97 # Always comment/uncomment all macros of a set.
98
99 # Library to use with near data and 2-byte integers
100 # Notes: o slower than 4-byte integers with 68000 cpu
101 # o *not* recommended due to poor overall performance
102 # o see comment in amiga/osdep.h
103 #DATAOPTS = DATA=NEAR SHORTINTEGERS DEF=_NEAR_DATA
104 #SASLIB = scs
105 #ASMOPTS = -dINT16
106 #LSTARTUP = cres.o
107
108 # Library to use with near data and 4-byte integers (DEFAULT)
109 # *** use this with the utility.library ***
110 DATAOPTS = DATA=NEAR DEF=_NEAR_DATA
111 SASLIB = sc
112 ASMOPTS =
113 LSTARTUP = cres.o
114
115 # Library to use with far data and 2-byte integers
116 # use if DYN_ALLOC is not defined
117 # old default - far data always works but is slower
118 #DATAOPTS = DATA=FAR SHORTINTEGERS DEF=_FAR_DATA
119 #SASLIB = scsnb
120 #ASMOPTS = -dINT16
121 #LSTARTUP = c.o
122
123 # Library to use with far data and 4-byte integers
124 # if everything else fails: try this
125 #DATAOPTS = DATA=FAR DEF=_FAR_DATA
126 #SASLIB = scnb
127 #ASMOPTS =
128 #LSTARTUP = c.o
129
130
131 #
132 # DEBUGGING
133 # ---------
134
135 # Default: No debugging information added.
136 # The three macros below will be overwritten if you choose to add
137 # debug info, therefore no need to comment.
138
139 CDBG = NODEBUG NOPROFILE NOCOVERAGE # default: no debug info
140 ADBG =
141 LDBG = STRIPDEBUG # default: no debug info
142
143 # Compiler and loader debug flags. Uncomment as needed. Recomment when done.
144 # Optimization disabled for faster compilation (by using NOOPT)
145
146 #CDBG1 = DEF=DEBUG DEF=DEBUG_TIME # enables Info-Zip's debug output
147
148 # Enable profiling and coverage when desired. Option COVERAGE commented
149 # seperately because running coverage may corrupt your drive in case of a
150 # system crash since a file 'cover.dat' is created in your working directory.
151 # Note that the use of COVERAGE forces the use of the c.o startup module.
152
153 #CDBG2 = PROFILE
154 #CDBG3 = COVERAGE # must use c.o startup code:
155 #LSTARTUP = c.o # Uncomment *only* when you use COVERAGE
156
157 # *Uncomment* here macros CDBG, ADBG and LDBG to include debugging information
158
159 #CDBG = $(CDBG1) $(CDBG2) $(CDBG3) ADDSYM DEBUG=FULLFLUSH STACKCHECK NOOPT
160 #ADBG = DEBUG
161 #LDBG = ADDSYM
162
163 # Optional use of memwatch.library which can be found in your
164 # sc:extras/memlib directory. Please read the short docs (memlib.doc).
165 # Note that memwatch.library has a small bug: MWTerm() displays always
166 # the first entry.
167 # Get the latest version from aminet (dev/debug/memlib.lha) or
168 # contact me to get the patch. Uncomment all macros to use.
169 #CMEMLIB = DEFINE=MWDEBUG=1 # define to enable library
170 #LMEMLIB = SC:LIB/memwatch.lib # path to library
171 #LSTARTUP = c.o # must use c.o with memlib!
172
173
174 #
175 # MAPPING
176 # -------
177
178 # Map filenames used when mapping (no need to comment)
179 #
180 MAPFZ = zip.map # Zip map filename
181 MAPFN = zipnote.map # ZipNote map filename
182 MAPFC = zipcloak.map # ZipCloak map filename
183 MAPFS = zipsplit.map # ZipSplit map filename
184 MAPFL = ziplm.map # Zip low memory version map filename
185
186 # Map file output: Uncomment to highlight and bold headings.
187 #
188 #MAPFSTYLE = FANCY
189
190 # Map flags for each EXECUTABLE. Uncomment to enable mapping.
191 # For map options please refer to:
192 # SAS/C v6 manual, volume 1: user's guide, chapter 8, page 136: map
193 # Default: all options enabled: f,h,l,o,s,x
194 # |-> options start here
195 #LMAPZ = $(MAPFSTYLE) MAP $(MAPFZ) f,h,l,o,s,x # Zip maps
196 #LMAPN = $(MAPFSTYLE) MAP $(MAPFN) f,h,l,o,s,x # ZipNote maps
197 #LMAPC = $(MAPFSTYLE) MAP $(MAPFC) f,h,l,o,s,x # ZipCloak maps
198 #LMAPS = $(MAPFSTYLE) MAP $(MAPFS) f,h,l,o,s,x # ZipSplit maps
199 #LMAPL = $(MAPFSTYLE) MAP $(MAPFL) f,h,l,o,s,x # Zip lowmem maps
200
201 #
202 # LISTINGS
203 # --------
204
205 # Listfile-extensions for each executable (enter *with* dot)
206 #
207 LISTEXTZ = .lst # extension for Zip listfiles
208 LISTEXTU = .ulst # extension for utility listfiles (ZipNote,ZipCloak,ZipSplit)
209 LISTEXTL = .llst # extension for Zip low memory listfiles
210
211
212 # List files and cross references for each OBJECT.
213 # Add/remove flags as needed. Not all listed by default.
214 # Use LISTINCLUDES to determine the dependencies for smake
215 #
216 CLISTOPT = LISTHEADERS LISTMACROS # LISTSYSTEM LISTINCLUDES
217 CXREFOPT = XHEAD XSYS
218 #
219 # Uncomment to enable listing (default: commented)
220 # *** WARNING: List files require *lots* of disk space!
221 #
222 #CLIST = LIST $(CLISTOPT)
223 #CXREF = XREF $(CXREFOPT)
224
225
226 #
227 # SUPPRESSED COMPILER WARNINGS
228 # ----------------------------
229
230 # Compiler warnings to ignore
231 #
232 # Warning 105 : module does not define any externally-known symbols
233 # Warning 304 : Dead assignment eliminated...
234 # Note 306 : ...function inlined...
235 # Warning 317 : possibly uninitialized variable...
236 # Comment to enable.
237 #
238 CIGNORE = IGNORE=105,304,306,317
239
240
241 #
242 # OBJECT EXTENSIONS
243 #
244
245 # Extensions used for objects of each executeable.
246 # Transformation rules require unique extensions.
247 # Enter *with* dot.
248 #
249 O = .o # extension for Zip objects
250 OU = .uo # extension for utility objects (ZipNote, ZipSplit and ZipCloak)
251 OL = .lo # extension for low memory Zip objects
252
253
254 # Filename used to store converted options from environment variable
255 # LOCAL_ZIP. Default: scoptions_local_zip
256 #
257 CWITHOPT = scoptions_local_zip
258
259
260 # Filenames to store compiler options to prevent command line overflow
261 #
262 # Common options file for Zip and other executables
263 CFILE = scoptions-zip
264
265
266 # Temp filenames for object lists to load using linker "WITH" command.
267 OBJLISTZ = zip_objlist.with # Zip object list
268 OBJLISTN = zipnote_objlist.with # ZipNote object list
269 OBJLISTC = zipcloak_objlist.with # ZipCloak object list
270 OBJLISTS = zipsplit_objlist.with # ZipSplit object list
271 OBJLISTL = ziplm_objlist.with # Zip low-mem object list
272
273
274 # Filenames to store linker options
275 #
276 LWITHZ = zip.lnk # zip linker options
277 LWITHN = zipnote.lnk # zipnote linker options
278 LWITHC = zipcloak.lnk # zipcloak linker options
279 LWITHS = zipsplit.lnk # zipsplit linker options
280 LWITHL = ziplm.lnk # zip low-mem linker options
281
282
283 # Define AMIGA_BETA to print "Beta Notice" up front. See tailor.h.
284 # Undefine AMIGA_BETA when building a released version.
285 #CDEFBETA = DEF=AMIGA_BETA
286
287 #####################################
288 # NOTHING TO CHANGE BEYOND HERE ... #
289 #####################################
290 # (except for C/asm dependencies)
291
292 # Define MEDIUM_MEM for production release (per Paul Kienitz).
293 # This reduces runtime memory requirement but not speed or compression.
294 # Note: Do *not* use BIG_MEM or MMAP since it isn't yet supported by the
295 assembler version of deflate.c : amiga/deflate.a
296 CUSEMEM = DEF=MEDIUM_MEM
297 AUSEMEM = -DMEDIUM_MEM # for asm deflate.o, must match above
298
299
300 # Defines for building low-memory use version of Zip
301 WSIZEL = WSIZE=4096 # deflate.c window size for low-mem version
302 CLOWMEM = DEF=SMALL_MEM DEF=$(WSIZEL)
303 ALOWMEM = -DSMALL_MEM -D$(WSIZEL) # for asm deflate.o, must match above
304
305
306 # Compiler definitions
307 #
308 CC = sc
309 #
310 # Optimizer flags
311 #
312 OPTPASSES = 6 # set number of global optimizer passes
313 #
314 OPT1 = OPT OPTINL OPTINLOCAL OPTTIME OPTLOOP OPTSCHED
315 OPT2 = OPTCOMP=$(OPTPASSES) OPTDEP=$(OPTPASSES) OPTRDEP=$(OPTPASSES)
316 OPT = $(OPT1) $(OPT2)
317
318
319 # Compiler flags
320 #
321 CDEFINES = $(CMEMLIB) $(CDEFBETA) DEF=AMIGA
322 COPTIONS = $(DATAOPTS) CODE=NEAR CPU=$(CUSECPU) VERBOSE PARAMETERS=BOTH NOMINC
323 COPTIONS = $(COPTIONS) ERRORREXX NOERRORCONSOLE MEMSIZE=HUGE $(CLIST) $(CXREF)
324 COPTIONS = $(COPTIONS) $(CSTACK) $(CUTIL) STRICT UNSCHAR NOICONS STRINGMERGE
325 CFLAGS = $(CDEFINES) $(COPTIONS) $(OPT) $(CDBG) $(CIGNORE)
326
327
328 # Linker definitions
329 # See SASLIB definition above
330 #
331 LD = slink
332 # special linker flags for pure (i.e. resident) binary.
333 LDFLAGSS = FROM SC:LIB/$(LSTARTUP)
334 # common linker flags for all other executeables
335 LDFLAGSC = FROM SC:LIB/c.o
336 LDFLAGS2 = NOICONS $(LDBG)
337 LIBFLAGS = LIB $(LMEMLIB) SC:LIB/$(SASLIB).lib SC:LIB/amiga.lib
338
339
340 # Assembler definitions
341 #
342 ASM = asm
343 #
344 # Options used for assembling amiga/deflate.a
345 # Must match defines in C-Source.
346 #
347 AFLAGS0 = -d__SASC -dSASC -dAMIGA
348 AFLAGS1 = $(AUSE020) $(ASMOPTS) $(ADBG)
349 AFLAGS2 = -m$(AUSECPU) -jm -iINCLUDE:
350 AFLAGS = $(AFLAGS0) $(AFLAGS1) $(AFLAGS2)
351 ASMOPTSZ = $(AFLAGS) $(AUSEMEM) -dDYN_ALLOC # Zip asm flags
352 ASMOPTSL = $(AFLAGS) $(ALOWMEM) # Zip low-mem version asm flags
353
354
355 ##################
356 # TARGET OBJECTS #
357 ##################
358
359
360 # Zip objects
361 OBJZ1 = zip$(O) zipfile$(O) zipup$(O) fileio$(O) util$(O) globals$(O)
362 OBJZ2 = crc32$(O) crypt$(O) timezone$(O) ttyio$(O)
363 OBJZI = deflate$(O) trees$(O)
364 OBJZA = amiga$(O) amigazip$(O) stat$(O) filedate$(O)
365 OBJZ = $(OBJZ1) $(OBJZ2) $(OBJZI) $(OBJZA)
366
367 # Shared utility objects for ZipNote, ZipCloak and ZipSplit
368 OBJU1 = globals$(O)
369 OBJUU = zipfile$(OU) fileio$(OU) timezone$(O) util$(OU)
370 OBJUA = amigazip$(OU) amiga$(O) stat$(O) filedate$(O)
371 OBJU = $(OBJU1) $(OBJUU) $(OBJUA)
372
373 # ZipNote objects
374 OBJN1 = zipnote$(O)
375 OBJN = $(OBJN1) $(OBJU)
376
377 # ZipCloak objects
378 OBJC1 = zipcloak$(O)
379 OBJCU = $(OBJU) crypt$(OU)
380 OBJCS = crc32$(OU) ttyio$(O)
381 OBJC = $(OBJC1) $(OBJCU) $(OBJCS)
382
383 #ZipSplit objects
384 OBJS1 = zipsplit$(O)
385 OBJS = $(OBJS1) $(OBJU)
386
387 # ZipLM objects
388 OBJL1 = zip$(OL) zipfile$(OL) zipup$(OL) fileio$(OL) util$(OL) globals$(OL)
389 OBJL2 = crc32$(OL) crypt$(OL) timezone$(OL) ttyio$(OL)
390 OBJLI = deflate$(OL) trees$(OL)
391 OBJLA = amiga$(OL) amigazip$(OL) stat$(OL) filedate$(OL)
392 OBJL = $(OBJL1) $(OBJL2) $(OBJLI) $(OBJLA)
393
394 # Common header files
395 ZIP_H1 = zip.h ziperr.h tailor.h
396 ZIP_HA = amiga/osdep.h amiga/z-stat.h
397 ZIP_H = $(ZIP_H1) $(ZIP_HA)
398
399 # Output targets
400 ZIPS = Zip ZipNote ZipCloak ZipSplit ZipLM
401
402
403 # Temp filenames for object lists to load using linker "WITH" command.
404 OBJLISTZ = zip_objlist.with # Zip object list
405 OBJLISTN = zipnote_objlist.with # ZipNote object list
406 OBJLISTC = zipcloak_objlist.with # ZipCloak object list
407 OBJLISTS = zipsplit_objlist.with # ZipSplit object list
408 OBJLISTL = ziplm_objlist.with # Zip low-mem object list
409
410 #######################################
411 # DEFAULT TARGET AND PROCESSING RULES #
412 #######################################
413
414 all: request flush $(ZIPS)
415
416 # Zip transformation rules
417 #
418 .c$(O):
419 $(CC) WITH=$(CFILE) $(CUSEMEM) LISTFILE=$>$(LISTEXTZ) OBJNAME=$@ $*.c
420
421 # Zip low-memory version transformation rules
422 #
423 .c$(OL):
424 $(CC) WITH=$(CFILE) $(CLOWMEM) LISTFILE=$>$(LISTEXTL) OBJNAME=$@ $*.c
425
426 # Utilities (ZipNote, ZipCloak and ZipSplit) transformation rules
427 #
428 .c$(OU):
429 $(CC) WITH=$(CFILE) $(CUSEMEM) DEF=UTIL LISTFILE=$>$(LISTEXTU) OBJNAME=$@ $*.c
430
431
432 #########################
433 # Final output targets. #
434 #########################
435
436
437 zip: local_zip CommonFlags $(OBJZ)
438 @Echo "$(OBJZ)" > $(OBJLISTZ)
439 Type $(OBJLISTZ)
440 @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTZ) $(LIBFLAGS)" \
441 "$(LDFLAGS2) $(LMAPZ)" >$(LWITHZ)
442 Type $(LWITHZ)
443 $(LD) TO Zip WITH $(LWITHZ)
444
445 zipnote: local_zip CommonFlags $(OBJN)
446 @Echo "$(OBJN)" > $(OBJLISTN)
447 Type $(OBJLISTN)
448 @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTN) $(LIBFLAGS) " \
449 "$(LDFLAGS2) $(LMAPN)" >$(LWITHN)
450 Type $(LWITHN)
451 $(LD) TO ZipNote WITH $(LWITHN)
452
453 zipcloak: local_zip CommonFlags $(OBJC)
454 @Echo "$(OBJC)" > $(OBJLISTC)
455 Type $(OBJLISTC)
456 @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTC) $(LIBFLAGS) " \
457 "$(LDFLAGS2) $(LMAPC)" >$(LWITHC)
458 Type $(LWITHC)
459 $(LD) TO ZipCloak WITH $(LWITHC)
460
461 zipsplit: local_zip CommonFlags $(OBJS)
462 @Echo "$(OBJS)" > $(OBJLISTS)
463 Type $(OBJLISTS)
464 @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTS) $(LIBFLAGS) " \
465 "$(LDFLAGS2) $(LMAPS)" >$(LWITHS)
466 Type $(LWITHS)
467 $(LD) TO ZipSplit WITH $(LWITHS)
468
469 ziplm: local_zip CommonFlags $(OBJL)
470 @Echo "$(OBJL)" > $(OBJLISTL)
471 Type $(OBJLISTL)
472 @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTL) $(LIBFLAGS) " \
473 "$(LDFLAGS2) $(LMAPL)" >$(LWITHL)
474 Type $(LWITHL)
475 $(LD) TO ZipLM WITH $(LWITHL)
476
477
478 clean:
479 -Delete >nil: $(OBJZ) quiet
480 -Delete >nil: $(OBJN) quiet
481 -Delete >nil: $(OBJC) quiet
482 -Delete >nil: $(OBJS) quiet
483 -Delete >nil: $(OBJL) quiet
484 -Delete >nil: $(OBJLISTZ) $(OBJLISTL) $(OBJLISTN) $(OBJLISTS) $(OBJLISTC) quiet
485 -Delete >nil: $(MAPFZ) $(MAPFN) $(MAPFC) $(MAPFS) $(MAPFL) quiet
486 -Delete >nil: \#?$(LISTEXTZ) \#?$(LISTEXTU) \#?$(LISTEXTL) quiet
487 -Delete >nil: $(CWITHOPT) $(CFILE) quiet
488 -Delete >nil: $(LWITHZ) $(LWITHN) $(LWITHC) $(LWITHS) $(LWITHL) quiet
489 -Delete >nil: env:VersionDate quiet
490 -Delete >nil: \#?.q.?? \#?.tmp \#?.cov quiet
491
492 spotless: clean
493 -Delete >nil: $(ZIPS) quiet
494
495
496 ################
497 # DEPENDENCIES #
498 ################
499
500 # To change between the assembler and C sources, you have to comment/uncomment
501 # the approprite lines. C sources are marked by #C-src and assembler sources
502 # #asm-src at the end.
503 # Zip dependencies:
504 #
505
506 zip$(O): zip.c $(ZIP_H) revision.h crc32.h crypt.h ttyio.h
507 zipup$(O): zipup.c $(ZIP_H) revision.h crc32.h crypt.h amiga/zipup.h
508 zipfile$(O): zipfile.c $(ZIP_H) revision.h crc32.h
509 crypt$(O): crypt.c $(ZIP_H) crypt.h crc32.h ttyio.h
510 ttyio$(O): ttyio.c $(ZIP_H) crypt.h ttyio.h
511 deflate$(O): deflate.c $(ZIP_H) #C-src
512 trees$(O): trees.c $(ZIP_H)
513 fileio$(O): fileio.c $(ZIP_H) crc32.h
514 util$(O): util.c $(ZIP_H)
515 crc32$(O): crc32.c $(ZIP_H) crc32.h
516 globals$(O): globals.c $(ZIP_H)
517 timezone$(O): timezone.c $(ZIP_H) timezone.h
518 # Amiga specific objects
519 stat$(O): amiga/stat.c amiga/z-stat.h
520 filedate$(O): amiga/filedate.c crypt.h timezone.h
521 amiga$(O): amiga/amiga.c ziperr.h
522 amigazip$(O): amiga/amigazip.c $(ZIP_H) amiga/amiga.h env:Workbench
523 # Substitute assembly version of deflate.c:
524 #deflate$(O): amiga/deflate.a #asm-src
525 # $(ASM) $(ASMOPTSZ) -o$@ $*.a #asm-src
526
527
528 # Utility (ZipNote, ZipCloak, ZipSplit) dependencies:
529 #
530 zipnote$(O): zipnote.c $(ZIP_H) revision.h
531 zipcloak$(O): zipcloak.c $(ZIP_H) revision.h crc32.h crypt.h ttyio.h
532 zipsplit$(O): zipsplit.c $(ZIP_H) revision.h
533 zipfile$(OU): zipfile.c $(ZIP_H) revision.h crc32.h
534 fileio$(OU): fileio.c $(ZIP_H) crc32.h
535 util$(OU): util.c $(ZIP_H)
536 crc32$(OU): crc32.c $(ZIP_H) crc32.h
537 crypt$(OU): crypt.c $(ZIP_H) crypt.h crc32.h ttyio.h
538 # Amiga specific objects
539 amigazip$(OU): amiga/amigazip.c $(ZIP_H) amiga/amiga.h env:Workbench
540
541 # ZipLM dependencies:
542 #
543 zip$(OL): zip.c $(ZIP_H) revision.h crc32.h crypt.h ttyio.h
544 zipup$(OL): zipup.c $(ZIP_H) revision.h crc32.h crypt.h amiga/zipup.h
545 zipfile$(OL): zipfile.c $(ZIP_H) revision.h crc32.h
546 crypt$(OL): crypt.c $(ZIP_H) crypt.h crc32.h ttyio.h
547 ttyio$(OL): ttyio.c $(ZIP_H) crypt.h ttyio.h
548 deflate$(OL): deflate.c $(ZIP_H)
549 trees$(OL): trees.c $(ZIP_H)
550 fileio$(OL): fileio.c $(ZIP_H) crc32.h
551 util$(OL): util.c $(ZIP_H)
552 crc32$(OL): crc32.c $(ZIP_H)
553 globals$(OL): globals.c $(ZIP_H)
554 timezone$(OL): timezone.c $(ZIP_H) timezone.h
555 # Amiga specific objects
556 stat$(OL): amiga/stat.c amiga/z-stat.h
557 filedate$(OL): amiga/filedate.c crypt.h timezone.h
558 amiga$(OL): amiga/amiga.c ziperr.h
559 # Substitute assembly version of deflate.c:
560 #deflate$(OL): amiga/deflate.a
561 # $(ASM) $(ASMOPTSL) -o$@ $*.a
562
563
564 ########################
565 # DEPENDECIES END HERE #
566 ########################
567
568 # flush all libraries to provide more mem for compilation
569 flush:
570 @Avail flush >nil:
571
572 # write common compiler flags to file and echo to user
573 CommonFlags:
574 @Echo "$(CFLAGS)" >$(CFILE)
575 @Type "$(CWITHOPT)" >>$(CFILE)
576 -Type $(CFILE)
577
578
579 # special rules for adding Amiga internal version number to amiga/amiga.c
580 amiga$(O):
581 rx > env:VersionDate "say '""'translate(date('E'),'.','/')'""'"
582 $(CC) WITH=$(CFILE) $(CUSEMEM) LISTFILE=$>$(LISTEXTZ) OBJNAME=$@ $*.c
583 -Delete env:VersionDate
584
585 amiga$(OL):
586 rx > env:VersionDate "say '""'translate(date('E'),'.','/')'""'"
587 $(CC) WITH=$(CFILE) $(CLOWMEM) LISTFILE=$>$(LISTEXTL) OBJNAME=$@ $*.c
588 -Delete env:VersionDate
589
590
591 # needed in amiga/amigazip.c
592 # should be set in startup-sequence, but just in case:
593 # (only works with OS 2.0 and above)
594
595 env\:WorkBench:
596 @Execute < < (Workbench_smk.tmp)
597 FailAt 21
598 If not exists ENV:Workbench
599 Version >nil:
600 SetEnv Workbench $$Workbench
601 Endif
602 <
603
604
605 # Read environment variable LOCAL_ZIP and convert options to SAS format
606 #
607 # e.g.: to define FOO_ONE and FOO_TWO enter:
608 #
609 # SetEnv LOCAL_ZIP "-DFOO_ONE -DFOO_TWO"
610 #
611 # Put the statement into your startup-sequence or (for AmigaDOS 2.0 or higher
612 # only) make sure LOCAL_ZIP is stored in the ENVARC: directory
613 # ( Copy ENV:LOCAL_ZIP ENVARC: )
614 #
615
616 local_zip:
617 @Execute < < (Local_Zip_smk.tmp)
618 Failat 21
619 If exists ENV:LOCAL_ZIP
620 Echo "Using environment variable LOCAL_ZIP !"
621 Copy >NIL: ENV:LOCAL_ZIP SASCOPTS
622 Else
623 Echo "You could use envvar ZIP_OPT to set your special compilation options."
624 Delete >nil: SASCOPTS quiet
625 Endif
626 ; Do not remove the lctosc command! If LOCAL_ZIP is unset, an
627 ; empty file is created which needed by CommonFlags !
628 lctosc >$(CWITHOPT)
629 <
630
631
632
633 # Echo request to the user
634 #
635 request:
636 @Echo ""
637 @Echo " This makefile is for use with SAS/C version 6.58."
638 @Echo " If you still have an older version, please upgrade!"
639 @Echo " Patches are available on the Aminet under biz/patch/sc\#?."
640 @Echo ""
641 @Echo " Just a simple request..."
642 @Echo " Please give me a mail that you compiled whether you encounter any errors"
643 @Echo " or not. I'd just like to know how many Amiga users actually make use of"
644 @Echo " this makefile."
645 @Echo " If you mail me, I'll put you on my mailing-list and notify you whenever"
646 @Echo " new versions of Info-Zip are released."
647 @Echo " Have a look at the makefile for changes like CPU type, UtilLib, etc."
648 @Echo " Feel free to mail comments, suggestions, etc."
649 @Echo " Enjoy Info-Zip !"
650 @Echo " Haidinger Walter, <[email protected]>"
651 @Echo ""
652
653
654 # Echo help in case of an error
655 #
656 .ONERROR:
657 @Echo ""
658 @Echo "[sigh] An error running this makefile was detected."
659 @Echo "This message may also appear if you interrupted smake by pressing CTRL-C."
660 @Echo "Contact Info-Zip authors at [email protected] or me for help."
661 @Echo "Haidinger Walter, <[email protected]>"
662