Debian Codegraph @

stubdom/vtpm-command-duration.patch

raw
1 From e7c976b5864e7d2649292d90ea60d5aea091a990 Mon Sep 17 00:00:00 2001
2 From: Jason Andryuk <[email protected]>
3 Date: Sun, 14 Mar 2021 12:46:34 -0400
4 Subject: [PATCH 2/2] Increase command durations
5
6 Wth Linux 5.4 xen-tpmfront and a Xen vtpm-stubdom, xen-tpmfront was
7 failing commands with -ETIME:
8 tpm tpm0: tpm_try_transmit: send(): error-62
9
10 The vtpm was returning the data, but it was after the duration timeout
11 in vtpm_send. Linux may have started being more stringent about timing?
12
13 The vtpm-stubdom has a little delay since it writes its disk before
14 returning the response.
15
16 Anyway, the durations are rather low. When they were 1/10/1000 before
17 converting to microseconds, Linux showed all three durations rounded to
18 10000. Update them with values from a physical TPM1.2. These were
19 taken from a WEC which was software downgraded from a TPM2 to a TPM1.2.
20 They might be excessive, but I'd rather have a command succeed than
21 return -ETIME.
22
23 An IFX physical TPM1.2 uses:
24 1000000
25 1500000
26 150000000
27
28 Signed-off-by: Jason Andryuk <[email protected]>
29 ---
30 tpm/tpm_data.c | 6 +++---
31 1 file changed, 3 insertions(+), 3 deletions(-)
32
33 diff --git a/tpm/tpm_data.c b/tpm/tpm_data.c
34 index bebaf10..844afca 100644
35 --- a/tpm/tpm_data.c
36 +++ b/tpm/tpm_data.c
37 @@ -71,9 +71,9 @@ static void init_timeouts(void)
38 tpmData.permanent.data.tis_timeouts[1] = 2000000;
39 tpmData.permanent.data.tis_timeouts[2] = 750000;
40 tpmData.permanent.data.tis_timeouts[3] = 750000;
41 - tpmData.permanent.data.cmd_durations[0] = 1000;
42 - tpmData.permanent.data.cmd_durations[1] = 10000;
43 - tpmData.permanent.data.cmd_durations[2] = 1000000;
44 + tpmData.permanent.data.cmd_durations[0] = 3000000;
45 + tpmData.permanent.data.cmd_durations[1] = 3000000;
46 + tpmData.permanent.data.cmd_durations[2] = 600000000;
47 }
48
49 void tpm_init_data(void)
50 --
51 2.30.2
52