| 1 |
#ifndef __LINUX_NL80211_H |
| 2 |
#define __LINUX_NL80211_H |
| 3 |
/* |
| 4 |
* 802.11 netlink interface public header |
| 5 |
* |
| 6 |
* Copyright 2006-2010 Johannes Berg <[email protected]> |
| 7 |
* Copyright 2008 Michael Wu <[email protected]> |
| 8 |
* Copyright 2008 Luis Carlos Cobo <[email protected]> |
| 9 |
* Copyright 2008 Michael Buesch <[email protected]> |
| 10 |
* Copyright 2008, 2009 Luis R. Rodriguez <[email protected]> |
| 11 |
* Copyright 2008 Jouni Malinen <[email protected]> |
| 12 |
* Copyright 2008 Colin McCabe <[email protected]> |
| 13 |
* Copyright 2015-2017 Intel Deutschland GmbH |
| 14 |
* Copyright (C) 2018-2020 Intel Corporation |
| 15 |
* |
| 16 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 17 |
* purpose with or without fee is hereby granted, provided that the above |
| 18 |
* copyright notice and this permission notice appear in all copies. |
| 19 |
* |
| 20 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 21 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 22 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 23 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 24 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 25 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 26 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 27 |
* |
| 28 |
*/ |
| 29 |
|
| 30 |
/* |
| 31 |
* This header file defines the userspace API to the wireless stack. Please |
| 32 |
* be careful not to break things - i.e. don't move anything around or so |
| 33 |
* unless you can demonstrate that it breaks neither API nor ABI. |
| 34 |
* |
| 35 |
* Additions to the API should be accompanied by actual implementations in |
| 36 |
* an upstream driver, so that example implementations exist in case there |
| 37 |
* are ever concerns about the precise semantics of the API or changes are |
| 38 |
* needed, and to ensure that code for dead (no longer implemented) API |
| 39 |
* can actually be identified and removed. |
| 40 |
* Nonetheless, semantics should also be documented carefully in this file. |
| 41 |
*/ |
| 42 |
|
| 43 |
#include <linux/types.h> |
| 44 |
|
| 45 |
#define NL80211_GENL_NAME "nl80211" |
| 46 |
|
| 47 |
#define NL80211_MULTICAST_GROUP_CONFIG "config" |
| 48 |
#define NL80211_MULTICAST_GROUP_SCAN "scan" |
| 49 |
#define NL80211_MULTICAST_GROUP_REG "regulatory" |
| 50 |
#define NL80211_MULTICAST_GROUP_MLME "mlme" |
| 51 |
#define NL80211_MULTICAST_GROUP_VENDOR "vendor" |
| 52 |
#define NL80211_MULTICAST_GROUP_NAN "nan" |
| 53 |
#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" |
| 54 |
|
| 55 |
#define NL80211_EDMG_BW_CONFIG_MIN 4 |
| 56 |
#define NL80211_EDMG_BW_CONFIG_MAX 15 |
| 57 |
#define NL80211_EDMG_CHANNELS_MIN 1 |
| 58 |
#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ |
| 59 |
|
| 60 |
/** |
| 61 |
* DOC: Station handling |
| 62 |
* |
| 63 |
* Stations are added per interface, but a special case exists with VLAN |
| 64 |
* interfaces. When a station is bound to an AP interface, it may be moved |
| 65 |
* into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). |
| 66 |
* The station is still assumed to belong to the AP interface it was added |
| 67 |
* to. |
| 68 |
* |
| 69 |
* Station handling varies per interface type and depending on the driver's |
| 70 |
* capabilities. |
| 71 |
* |
| 72 |
* For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS |
| 73 |
* and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: |
| 74 |
* - a setup station entry is added, not yet authorized, without any rate |
| 75 |
* or capability information, this just exists to avoid race conditions |
| 76 |
* - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid |
| 77 |
* to add rate and capability information to the station and at the same |
| 78 |
* time mark it authorized. |
| 79 |
* - %NL80211_TDLS_ENABLE_LINK is then used |
| 80 |
* - after this, the only valid operation is to remove it by tearing down |
| 81 |
* the TDLS link (%NL80211_TDLS_DISABLE_LINK) |
| 82 |
* |
| 83 |
* TODO: need more info for other interface types |
| 84 |
*/ |
| 85 |
|
| 86 |
/** |
| 87 |
* DOC: Frame transmission/registration support |
| 88 |
* |
| 89 |
* Frame transmission and registration support exists to allow userspace |
| 90 |
* management entities such as wpa_supplicant react to management frames |
| 91 |
* that are not being handled by the kernel. This includes, for example, |
| 92 |
* certain classes of action frames that cannot be handled in the kernel |
| 93 |
* for various reasons. |
| 94 |
* |
| 95 |
* Frame registration is done on a per-interface basis and registrations |
| 96 |
* cannot be removed other than by closing the socket. It is possible to |
| 97 |
* specify a registration filter to register, for example, only for a |
| 98 |
* certain type of action frame. In particular with action frames, those |
| 99 |
* that userspace registers for will not be returned as unhandled by the |
| 100 |
* driver, so that the registered application has to take responsibility |
| 101 |
* for doing that. |
| 102 |
* |
| 103 |
* The type of frame that can be registered for is also dependent on the |
| 104 |
* driver and interface type. The frame types are advertised in wiphy |
| 105 |
* attributes so applications know what to expect. |
| 106 |
* |
| 107 |
* NOTE: When an interface changes type while registrations are active, |
| 108 |
* these registrations are ignored until the interface type is |
| 109 |
* changed again. This means that changing the interface type can |
| 110 |
* lead to a situation that couldn't otherwise be produced, but |
| 111 |
* any such registrations will be dormant in the sense that they |
| 112 |
* will not be serviced, i.e. they will not receive any frames. |
| 113 |
* |
| 114 |
* Frame transmission allows userspace to send for example the required |
| 115 |
* responses to action frames. It is subject to some sanity checking, |
| 116 |
* but many frames can be transmitted. When a frame was transmitted, its |
| 117 |
* status is indicated to the sending socket. |
| 118 |
* |
| 119 |
* For more technical details, see the corresponding command descriptions |
| 120 |
* below. |
| 121 |
*/ |
| 122 |
|
| 123 |
/** |
| 124 |
* DOC: Virtual interface / concurrency capabilities |
| 125 |
* |
| 126 |
* Some devices are able to operate with virtual MACs, they can have |
| 127 |
* more than one virtual interface. The capability handling for this |
| 128 |
* is a bit complex though, as there may be a number of restrictions |
| 129 |
* on the types of concurrency that are supported. |
| 130 |
* |
| 131 |
* To start with, each device supports the interface types listed in |
| 132 |
* the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the |
| 133 |
* types there no concurrency is implied. |
| 134 |
* |
| 135 |
* Once concurrency is desired, more attributes must be observed: |
| 136 |
* To start with, since some interface types are purely managed in |
| 137 |
* software, like the AP-VLAN type in mac80211 for example, there's |
| 138 |
* an additional list of these, they can be added at any time and |
| 139 |
* are only restricted by some semantic restrictions (e.g. AP-VLAN |
| 140 |
* cannot be added without a corresponding AP interface). This list |
| 141 |
* is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. |
| 142 |
* |
| 143 |
* Further, the list of supported combinations is exported. This is |
| 144 |
* in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, |
| 145 |
* it exports a list of "groups", and at any point in time the |
| 146 |
* interfaces that are currently active must fall into any one of |
| 147 |
* the advertised groups. Within each group, there are restrictions |
| 148 |
* on the number of interfaces of different types that are supported |
| 149 |
* and also the number of different channels, along with potentially |
| 150 |
* some other restrictions. See &enum nl80211_if_combination_attrs. |
| 151 |
* |
| 152 |
* All together, these attributes define the concurrency of virtual |
| 153 |
* interfaces that a given device supports. |
| 154 |
*/ |
| 155 |
|
| 156 |
/** |
| 157 |
* DOC: packet coalesce support |
| 158 |
* |
| 159 |
* In most cases, host that receives IPv4 and IPv6 multicast/broadcast |
| 160 |
* packets does not do anything with these packets. Therefore the |
| 161 |
* reception of these unwanted packets causes unnecessary processing |
| 162 |
* and power consumption. |
| 163 |
* |
| 164 |
* Packet coalesce feature helps to reduce number of received interrupts |
| 165 |
* to host by buffering these packets in firmware/hardware for some |
| 166 |
* predefined time. Received interrupt will be generated when one of the |
| 167 |
* following events occur. |
| 168 |
* a) Expiration of hardware timer whose expiration time is set to maximum |
| 169 |
* coalescing delay of matching coalesce rule. |
| 170 |
* b) Coalescing buffer in hardware reaches it's limit. |
| 171 |
* c) Packet doesn't match any of the configured coalesce rules. |
| 172 |
* |
| 173 |
* User needs to configure following parameters for creating a coalesce |
| 174 |
* rule. |
| 175 |
* a) Maximum coalescing delay |
| 176 |
* b) List of packet patterns which needs to be matched |
| 177 |
* c) Condition for coalescence. pattern 'match' or 'no match' |
| 178 |
* Multiple such rules can be created. |
| 179 |
*/ |
| 180 |
|
| 181 |
/** |
| 182 |
* DOC: WPA/WPA2 EAPOL handshake offload |
| 183 |
* |
| 184 |
* By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers |
| 185 |
* can indicate they support offloading EAPOL handshakes for WPA/WPA2 |
| 186 |
* preshared key authentication in station mode. In %NL80211_CMD_CONNECT |
| 187 |
* the preshared key should be specified using %NL80211_ATTR_PMK. Drivers |
| 188 |
* supporting this offload may reject the %NL80211_CMD_CONNECT when no |
| 189 |
* preshared key material is provided, for example when that driver does |
| 190 |
* not support setting the temporal keys through %NL80211_CMD_NEW_KEY. |
| 191 |
* |
| 192 |
* Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be |
| 193 |
* set by drivers indicating offload support of the PTK/GTK EAPOL |
| 194 |
* handshakes during 802.1X authentication in station mode. In order to |
| 195 |
* use the offload the %NL80211_CMD_CONNECT should have |
| 196 |
* %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this |
| 197 |
* offload may reject the %NL80211_CMD_CONNECT when the attribute flag is |
| 198 |
* not present. |
| 199 |
* |
| 200 |
* By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers |
| 201 |
* can indicate they support offloading EAPOL handshakes for WPA/WPA2 |
| 202 |
* preshared key authentication in AP mode. In %NL80211_CMD_START_AP |
| 203 |
* the preshared key should be specified using %NL80211_ATTR_PMK. Drivers |
| 204 |
* supporting this offload may reject the %NL80211_CMD_START_AP when no |
| 205 |
* preshared key material is provided, for example when that driver does |
| 206 |
* not support setting the temporal keys through %NL80211_CMD_NEW_KEY. |
| 207 |
* |
| 208 |
* For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK |
| 209 |
* using %NL80211_CMD_SET_PMK. For offloaded FT support also |
| 210 |
* %NL80211_ATTR_PMKR0_NAME must be provided. |
| 211 |
*/ |
| 212 |
|
| 213 |
/** |
| 214 |
* DOC: FILS shared key authentication offload |
| 215 |
* |
| 216 |
* FILS shared key authentication offload can be advertized by drivers by |
| 217 |
* setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support |
| 218 |
* FILS shared key authentication offload should be able to construct the |
| 219 |
* authentication and association frames for FILS shared key authentication and |
| 220 |
* eventually do a key derivation as per IEEE 802.11ai. The below additional |
| 221 |
* parameters should be given to driver in %NL80211_CMD_CONNECT and/or in |
| 222 |
* %NL80211_CMD_UPDATE_CONNECT_PARAMS. |
| 223 |
* %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai |
| 224 |
* %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai |
| 225 |
* %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message |
| 226 |
* %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK |
| 227 |
* rIK should be used to generate an authentication tag on the ERP message and |
| 228 |
* rMSK should be used to derive a PMKSA. |
| 229 |
* rIK, rMSK should be generated and keyname_nai, sequence number should be used |
| 230 |
* as specified in IETF RFC 6696. |
| 231 |
* |
| 232 |
* When FILS shared key authentication is completed, driver needs to provide the |
| 233 |
* below additional parameters to userspace, which can be either after setting |
| 234 |
* up a connection or after roaming. |
| 235 |
* %NL80211_ATTR_FILS_KEK - used for key renewal |
| 236 |
* %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges |
| 237 |
* %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated |
| 238 |
* %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace |
| 239 |
* The PMKSA can be maintained in userspace persistently so that it can be used |
| 240 |
* later after reboots or wifi turn off/on also. |
| 241 |
* |
| 242 |
* %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS |
| 243 |
* capable AP supporting PMK caching. It specifies the scope within which the |
| 244 |
* PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and |
| 245 |
* %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based |
| 246 |
* on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with |
| 247 |
* %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to |
| 248 |
* use in a FILS shared key connection with PMKSA caching. |
| 249 |
*/ |
| 250 |
|
| 251 |
/** |
| 252 |
* DOC: SAE authentication offload |
| 253 |
* |
| 254 |
* By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they |
| 255 |
* support offloading SAE authentication for WPA3-Personal networks in station |
| 256 |
* mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by |
| 257 |
* drivers indicating the offload support in AP mode. |
| 258 |
* |
| 259 |
* The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in |
| 260 |
* %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode |
| 261 |
* respectively. |
| 262 |
*/ |
| 263 |
|
| 264 |
/** |
| 265 |
* DOC: VLAN offload support for setting group keys and binding STAs to VLANs |
| 266 |
* |
| 267 |
* By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they |
| 268 |
* support offloading VLAN functionality in a manner where the driver exposes a |
| 269 |
* single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs |
| 270 |
* can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet |
| 271 |
* case. Frames received from stations that are not assigned to any VLAN are |
| 272 |
* delivered on the main netdev and frames to such stations can be sent through |
| 273 |
* that main netdev. |
| 274 |
* |
| 275 |
* %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and |
| 276 |
* %NL80211_CMD_SET_STATION will optionally specify vlan_id using |
| 277 |
* %NL80211_ATTR_VLAN_ID. |
| 278 |
*/ |
| 279 |
|
| 280 |
/** |
| 281 |
* DOC: TID configuration |
| 282 |
* |
| 283 |
* TID config support can be checked in the %NL80211_ATTR_TID_CONFIG |
| 284 |
* attribute given in wiphy capabilities. |
| 285 |
* |
| 286 |
* The necessary configuration parameters are mentioned in |
| 287 |
* &enum nl80211_tid_config_attr and it will be passed to the |
| 288 |
* %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. |
| 289 |
* |
| 290 |
* If the configuration needs to be applied for specific peer then the MAC |
| 291 |
* address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the |
| 292 |
* configuration will be applied for all the connected peers in the vif except |
| 293 |
* any peers that have peer specific configuration for the TID by default; if |
| 294 |
* the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values |
| 295 |
* will be overwritten. |
| 296 |
* |
| 297 |
* All this configuration is valid only for STA's current connection |
| 298 |
* i.e. the configuration will be reset to default when the STA connects back |
| 299 |
* after disconnection/roaming, and this configuration will be cleared when |
| 300 |
* the interface goes down. |
| 301 |
*/ |
| 302 |
|
| 303 |
/** |
| 304 |
* enum nl80211_commands - supported nl80211 commands |
| 305 |
* |
| 306 |
* @NL80211_CMD_UNSPEC: unspecified command to catch errors |
| 307 |
* |
| 308 |
* @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request |
| 309 |
* to get a list of all present wiphys. |
| 310 |
* @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
| 311 |
* %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, |
| 312 |
* %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, |
| 313 |
* %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the |
| 314 |
* channel width; this is used for setting monitor mode channel), |
| 315 |
* %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, |
| 316 |
* %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or |
| 317 |
* %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, |
| 318 |
* see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward |
| 319 |
* compatibility only. |
| 320 |
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
| 321 |
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and |
| 322 |
* %NL80211_ATTR_WIPHY_NAME. |
| 323 |
* @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes |
| 324 |
* %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. |
| 325 |
* |
| 326 |
* @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; |
| 327 |
* either a dump request for all interfaces or a specific get with a |
| 328 |
* single %NL80211_ATTR_IFINDEX is supported. |
| 329 |
* @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires |
| 330 |
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. |
| 331 |
* @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response |
| 332 |
* to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, |
| 333 |
* %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also |
| 334 |
* be sent from userspace to request creation of a new virtual interface, |
| 335 |
* then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and |
| 336 |
* %NL80211_ATTR_IFNAME. |
| 337 |
* @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes |
| 338 |
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from |
| 339 |
* userspace to request deletion of a virtual interface, then requires |
| 340 |
* attribute %NL80211_ATTR_IFINDEX. |
| 341 |
* |
| 342 |
* @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified |
| 343 |
* by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. |
| 344 |
* @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, |
| 345 |
* %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. |
| 346 |
* @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, |
| 347 |
* %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, |
| 348 |
* and %NL80211_ATTR_KEY_SEQ attributes. |
| 349 |
* @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX |
| 350 |
* or %NL80211_ATTR_MAC. |
| 351 |
* |
| 352 |
* @NL80211_CMD_GET_BEACON: (not used) |
| 353 |
* @NL80211_CMD_SET_BEACON: change the beacon on an access point interface |
| 354 |
* using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL |
| 355 |
* attributes. For drivers that generate the beacon and probe responses |
| 356 |
* internally, the following attributes must be provided: %NL80211_ATTR_IE, |
| 357 |
* %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. |
| 358 |
* @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters |
| 359 |
* are like for %NL80211_CMD_SET_BEACON, and additionally parameters that |
| 360 |
* do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, |
| 361 |
* %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, |
| 362 |
* %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, |
| 363 |
* %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, |
| 364 |
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, |
| 365 |
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, |
| 366 |
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. |
| 367 |
* The channel to use can be set on the interface or be given using the |
| 368 |
* %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the |
| 369 |
* attributes determining channel width. |
| 370 |
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP |
| 371 |
* @NL80211_CMD_STOP_AP: Stop AP operation on the given interface |
| 372 |
* @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP |
| 373 |
* |
| 374 |
* @NL80211_CMD_GET_STATION: Get station attributes for station identified by |
| 375 |
* %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. |
| 376 |
* @NL80211_CMD_SET_STATION: Set station attributes for station identified by |
| 377 |
* %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. |
| 378 |
* @NL80211_CMD_NEW_STATION: Add a station with given attributes to the |
| 379 |
* interface identified by %NL80211_ATTR_IFINDEX. |
| 380 |
* @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC |
| 381 |
* or, if no MAC address given, all stations, on the interface identified |
| 382 |
* by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and |
| 383 |
* %NL80211_ATTR_REASON_CODE can optionally be used to specify which type |
| 384 |
* of disconnection indication should be sent to the station |
| 385 |
* (Deauthentication or Disassociation frame and reason code for that |
| 386 |
* frame). |
| 387 |
* |
| 388 |
* @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to |
| 389 |
* destination %NL80211_ATTR_MAC on the interface identified by |
| 390 |
* %NL80211_ATTR_IFINDEX. |
| 391 |
* @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to |
| 392 |
* destination %NL80211_ATTR_MAC on the interface identified by |
| 393 |
* %NL80211_ATTR_IFINDEX. |
| 394 |
* @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by |
| 395 |
* %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. |
| 396 |
* @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by |
| 397 |
* %NL80211_ATTR_MAC. |
| 398 |
* @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the |
| 399 |
* interface identified by %NL80211_ATTR_IFINDEX. |
| 400 |
* @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC |
| 401 |
* or, if no MAC address given, all mesh paths, on the interface identified |
| 402 |
* by %NL80211_ATTR_IFINDEX. |
| 403 |
* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by |
| 404 |
* %NL80211_ATTR_IFINDEX. |
| 405 |
* |
| 406 |
* @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set |
| 407 |
* regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device |
| 408 |
* has a private regulatory domain, it will be returned. Otherwise, the |
| 409 |
* global regdomain will be returned. |
| 410 |
* A device will have a private regulatory domain if it uses the |
| 411 |
* regulatory_hint() API. Even when a private regdomain is used the channel |
| 412 |
* information will still be mended according to further hints from |
| 413 |
* the regulatory core to help with compliance. A dump version of this API |
| 414 |
* is now available which will returns the global regdomain as well as |
| 415 |
* all private regdomains of present wiphys (for those that have it). |
| 416 |
* If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then |
| 417 |
* its private regdomain is the only valid one for it. The regulatory |
| 418 |
* core is not used to help with compliance in this case. |
| 419 |
* @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command |
| 420 |
* after being queried by the kernel. CRDA replies by sending a regulatory |
| 421 |
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our |
| 422 |
* current alpha2 if it found a match. It also provides |
| 423 |
* NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each |
| 424 |
* regulatory rule is a nested set of attributes given by |
| 425 |
* %NL80211_ATTR_REG_RULE_FREQ_[START|END] and |
| 426 |
* %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by |
| 427 |
* %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and |
| 428 |
* %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. |
| 429 |
* @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain |
| 430 |
* to the specified ISO/IEC 3166-1 alpha2 country code. The core will |
| 431 |
* store this as a valid request and then query userspace for it. |
| 432 |
* |
| 433 |
* @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the |
| 434 |
* interface identified by %NL80211_ATTR_IFINDEX |
| 435 |
* |
| 436 |
* @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the |
| 437 |
* interface identified by %NL80211_ATTR_IFINDEX |
| 438 |
* |
| 439 |
* @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The |
| 440 |
* interface is identified with %NL80211_ATTR_IFINDEX and the management |
| 441 |
* frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be |
| 442 |
* added to the end of the specified management frame is specified with |
| 443 |
* %NL80211_ATTR_IE. If the command succeeds, the requested data will be |
| 444 |
* added to all specified management frames generated by |
| 445 |
* kernel/firmware/driver. |
| 446 |
* Note: This command has been removed and it is only reserved at this |
| 447 |
* point to avoid re-using existing command number. The functionality this |
| 448 |
* command was planned for has been provided with cleaner design with the |
| 449 |
* option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, |
| 450 |
* NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, |
| 451 |
* NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. |
| 452 |
* |
| 453 |
* @NL80211_CMD_GET_SCAN: get scan results |
| 454 |
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters |
| 455 |
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the |
| 456 |
* probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to |
| 457 |
* specify a BSSID to scan for; if not included, the wildcard BSSID will |
| 458 |
* be used. |
| 459 |
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to |
| 460 |
* NL80211_CMD_GET_SCAN and on the "scan" multicast group) |
| 461 |
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, |
| 462 |
* partial scan results may be available |
| 463 |
* |
| 464 |
* @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain |
| 465 |
* intervals and certain number of cycles, as specified by |
| 466 |
* %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is |
| 467 |
* not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, |
| 468 |
* scheduled scan will run in an infinite loop with the specified interval. |
| 469 |
* These attributes are mutually exculsive, |
| 470 |
* i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if |
| 471 |
* NL80211_ATTR_SCHED_SCAN_PLANS is defined. |
| 472 |
* If for some reason scheduled scan is aborted by the driver, all scan |
| 473 |
* plans are canceled (including scan plans that did not start yet). |
| 474 |
* Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) |
| 475 |
* are passed, they are used in the probe requests. For |
| 476 |
* broadcast, a broadcast SSID must be passed (ie. an empty |
| 477 |
* string). If no SSID is passed, no probe requests are sent and |
| 478 |
* a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, |
| 479 |
* if passed, define which channels should be scanned; if not |
| 480 |
* passed, all channels allowed for the current regulatory domain |
| 481 |
* are used. Extra IEs can also be passed from the userspace by |
| 482 |
* using the %NL80211_ATTR_IE attribute. The first cycle of the |
| 483 |
* scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY |
| 484 |
* is supplied. If the device supports multiple concurrent scheduled |
| 485 |
* scans, it will allow such when the caller provides the flag attribute |
| 486 |
* %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. |
| 487 |
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if |
| 488 |
* scheduled scan is not running. The caller may assume that as soon |
| 489 |
* as the call returns, it is safe to start a new scheduled scan again. |
| 490 |
* @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan |
| 491 |
* results available. |
| 492 |
* @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has |
| 493 |
* stopped. The driver may issue this event at any time during a |
| 494 |
* scheduled scan. One reason for stopping the scan is if the hardware |
| 495 |
* does not support starting an association or a normal scan while running |
| 496 |
* a scheduled scan. This event is also sent when the |
| 497 |
* %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface |
| 498 |
* is brought down while a scheduled scan was running. |
| 499 |
* |
| 500 |
* @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation |
| 501 |
* or noise level |
| 502 |
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to |
| 503 |
* NL80211_CMD_GET_SURVEY and on the "scan" multicast group) |
| 504 |
* |
| 505 |
* @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC |
| 506 |
* (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK |
| 507 |
* (PMK is used for PTKSA derivation in case of FILS shared key offload) or |
| 508 |
* using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, |
| 509 |
* %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS |
| 510 |
* authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier |
| 511 |
* advertized by a FILS capable AP identifying the scope of PMKSA in an |
| 512 |
* ESS. |
| 513 |
* @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC |
| 514 |
* (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, |
| 515 |
* %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS |
| 516 |
* authentication. |
| 517 |
* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. |
| 518 |
* |
| 519 |
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain |
| 520 |
* has been changed and provides details of the request information |
| 521 |
* that caused the change such as who initiated the regulatory request |
| 522 |
* (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx |
| 523 |
* (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if |
| 524 |
* the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or |
| 525 |
* %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain |
| 526 |
* set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is |
| 527 |
* %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on |
| 528 |
* to (%NL80211_ATTR_REG_ALPHA2). |
| 529 |
* @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon |
| 530 |
* has been found while world roaming thus enabling active scan or |
| 531 |
* any mode of operation that initiates TX (beacons) on a channel |
| 532 |
* where we would not have been able to do either before. As an example |
| 533 |
* if you are world roaming (regulatory domain set to world or if your |
| 534 |
* driver is using a custom world roaming regulatory domain) and while |
| 535 |
* doing a passive scan on the 5 GHz band you find an AP there (if not |
| 536 |
* on a DFS channel) you will now be able to actively scan for that AP |
| 537 |
* or use AP mode on your card on that same channel. Note that this will |
| 538 |
* never be used for channels 1-11 on the 2 GHz band as they are always |
| 539 |
* enabled world wide. This beacon hint is only sent if your device had |
| 540 |
* either disabled active scanning or beaconing on a channel. We send to |
| 541 |
* userspace the wiphy on which we removed a restriction from |
| 542 |
* (%NL80211_ATTR_WIPHY) and the channel on which this occurred |
| 543 |
* before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) |
| 544 |
* the beacon hint was processed. |
| 545 |
* |
| 546 |
* @NL80211_CMD_AUTHENTICATE: authentication request and notification. |
| 547 |
* This command is used both as a command (request to authenticate) and |
| 548 |
* as an event on the "mlme" multicast group indicating completion of the |
| 549 |
* authentication process. |
| 550 |
* When used as a command, %NL80211_ATTR_IFINDEX is used to identify the |
| 551 |
* interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and |
| 552 |
* BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify |
| 553 |
* the SSID (mainly for association, but is included in authentication |
| 554 |
* request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + |
| 555 |
* %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the |
| 556 |
* channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the |
| 557 |
* authentication type. %NL80211_ATTR_IE is used to define IEs |
| 558 |
* (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added |
| 559 |
* to the frame. |
| 560 |
* When used as an event, this reports reception of an Authentication |
| 561 |
* frame in station and IBSS modes when the local MLME processed the |
| 562 |
* frame, i.e., it was for the local STA and was received in correct |
| 563 |
* state. This is similar to MLME-AUTHENTICATE.confirm primitive in the |
| 564 |
* MLME SAP interface (kernel providing MLME, userspace SME). The |
| 565 |
* included %NL80211_ATTR_FRAME attribute contains the management frame |
| 566 |
* (including both the header and frame body, but not FCS). This event is |
| 567 |
* also used to indicate if the authentication attempt timed out. In that |
| 568 |
* case the %NL80211_ATTR_FRAME attribute is replaced with a |
| 569 |
* %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which |
| 570 |
* pending authentication timed out). |
| 571 |
* @NL80211_CMD_ASSOCIATE: association request and notification; like |
| 572 |
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation |
| 573 |
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, |
| 574 |
* MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The |
| 575 |
* %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the |
| 576 |
* request is for the initial association to an ESS (that attribute not |
| 577 |
* included) or for reassociation within the ESS (that attribute is |
| 578 |
* included). |
| 579 |
* @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like |
| 580 |
* NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to |
| 581 |
* MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication |
| 582 |
* primitives). |
| 583 |
* @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like |
| 584 |
* NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to |
| 585 |
* MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). |
| 586 |
* |
| 587 |
* @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael |
| 588 |
* MIC (part of TKIP) failure; sent on the "mlme" multicast group; the |
| 589 |
* event includes %NL80211_ATTR_MAC to describe the source MAC address of |
| 590 |
* the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key |
| 591 |
* type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and |
| 592 |
* %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this |
| 593 |
* event matches with MLME-MICHAELMICFAILURE.indication() primitive |
| 594 |
* |
| 595 |
* @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a |
| 596 |
* FREQ attribute (for the initial frequency if no peer can be found) |
| 597 |
* and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those |
| 598 |
* should be fixed rather than automatically determined. Can only be |
| 599 |
* executed on a network interface that is UP, and fixed BSSID/FREQ |
| 600 |
* may be rejected. Another optional parameter is the beacon interval, |
| 601 |
* given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not |
| 602 |
* given defaults to 100 TU (102.4ms). |
| 603 |
* @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is |
| 604 |
* determined by the network interface. |
| 605 |
* |
| 606 |
* @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute |
| 607 |
* to identify the device, and the TESTDATA blob attribute to pass through |
| 608 |
* to the driver. |
| 609 |
* |
| 610 |
* @NL80211_CMD_CONNECT: connection request and notification; this command |
| 611 |
* requests to connect to a specified network but without separating |
| 612 |
* auth and assoc steps. For this, you need to specify the SSID in a |
| 613 |
* %NL80211_ATTR_SSID attribute, and can optionally specify the association |
| 614 |
* IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, |
| 615 |
* %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, |
| 616 |
* %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, |
| 617 |
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
| 618 |
* %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, |
| 619 |
* %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and |
| 620 |
* %NL80211_ATTR_WIPHY_FREQ_HINT. |
| 621 |
* If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are |
| 622 |
* restrictions on BSS selection, i.e., they effectively prevent roaming |
| 623 |
* within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT |
| 624 |
* can be included to provide a recommendation of the initial BSS while |
| 625 |
* allowing the driver to roam to other BSSes within the ESS and also to |
| 626 |
* ignore this recommendation if the indicated BSS is not ideal. Only one |
| 627 |
* set of BSSID,frequency parameters is used (i.e., either the enforcing |
| 628 |
* %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict |
| 629 |
* %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). |
| 630 |
* Driver shall not modify the IEs specified through %NL80211_ATTR_IE if |
| 631 |
* %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is |
| 632 |
* included, these IEs through %NL80211_ATTR_IE are specified by the user |
| 633 |
* space based on the best possible BSS selected. Thus, if the driver ends |
| 634 |
* up selecting a different BSS, it can modify these IEs accordingly (e.g. |
| 635 |
* userspace asks the driver to perform PMKSA caching with BSS1 and the |
| 636 |
* driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE |
| 637 |
* has to get updated with the apt PMKID). |
| 638 |
* %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within |
| 639 |
* the ESS in case the device is already associated and an association with |
| 640 |
* a different BSS is desired. |
| 641 |
* Background scan period can optionally be |
| 642 |
* specified in %NL80211_ATTR_BG_SCAN_PERIOD, |
| 643 |
* if not specified default background scan configuration |
| 644 |
* in driver is used and if period value is 0, bg scan will be disabled. |
| 645 |
* This attribute is ignored if driver does not support roam scan. |
| 646 |
* It is also sent as an event, with the BSSID and response IEs when the |
| 647 |
* connection is established or failed to be established. This can be |
| 648 |
* determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, |
| 649 |
* non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the |
| 650 |
* event, the connection attempt failed due to not being able to initiate |
| 651 |
* authentication/association or not receiving a response from the AP. |
| 652 |
* Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as |
| 653 |
* well to remain backwards compatible. |
| 654 |
* @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. |
| 655 |
* When a security association was established on an 802.1X network using |
| 656 |
* fast transition, this event should be followed by an |
| 657 |
* %NL80211_CMD_PORT_AUTHORIZED event. |
| 658 |
* Following a %NL80211_CMD_ROAM event userspace can issue |
| 659 |
* %NL80211_CMD_GET_SCAN in order to obtain the scan information for the |
| 660 |
* new BSS the card/driver roamed to. |
| 661 |
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify |
| 662 |
* userspace that a connection was dropped by the AP or due to other |
| 663 |
* reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and |
| 664 |
* %NL80211_ATTR_REASON_CODE attributes are used. |
| 665 |
* |
| 666 |
* @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices |
| 667 |
* associated with this wiphy must be down and will follow. |
| 668 |
* |
| 669 |
* @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified |
| 670 |
* channel for the specified amount of time. This can be used to do |
| 671 |
* off-channel operations like transmit a Public Action frame and wait for |
| 672 |
* a response while being associated to an AP on another channel. |
| 673 |
* %NL80211_ATTR_IFINDEX is used to specify which interface (and thus |
| 674 |
* radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the |
| 675 |
* frequency for the operation. |
| 676 |
* %NL80211_ATTR_DURATION is used to specify the duration in milliseconds |
| 677 |
* to remain on the channel. This command is also used as an event to |
| 678 |
* notify when the requested duration starts (it may take a while for the |
| 679 |
* driver to schedule this time due to other concurrent needs for the |
| 680 |
* radio). |
| 681 |
* When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) |
| 682 |
* that will be included with any events pertaining to this request; |
| 683 |
* the cookie is also used to cancel the request. |
| 684 |
* @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a |
| 685 |
* pending remain-on-channel duration if the desired operation has been |
| 686 |
* completed prior to expiration of the originally requested duration. |
| 687 |
* %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the |
| 688 |
* radio. The %NL80211_ATTR_COOKIE attribute must be given as well to |
| 689 |
* uniquely identify the request. |
| 690 |
* This command is also used as an event to notify when a requested |
| 691 |
* remain-on-channel duration has expired. |
| 692 |
* |
| 693 |
* @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX |
| 694 |
* rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface |
| 695 |
* and @NL80211_ATTR_TX_RATES the set of allowed rates. |
| 696 |
* |
| 697 |
* @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames |
| 698 |
* (via @NL80211_CMD_FRAME) for processing in userspace. This command |
| 699 |
* requires an interface index, a frame type attribute (optional for |
| 700 |
* backward compatibility reasons, if not given assumes action frames) |
| 701 |
* and a match attribute containing the first few bytes of the frame |
| 702 |
* that should match, e.g. a single byte for only a category match or |
| 703 |
* four bytes for vendor frames including the OUI. The registration |
| 704 |
* cannot be dropped, but is removed automatically when the netlink |
| 705 |
* socket is closed. Multiple registrations can be made. |
| 706 |
* The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if |
| 707 |
* %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which |
| 708 |
* case the registration can also be modified to include/exclude the |
| 709 |
* flag, rather than requiring unregistration to change it. |
| 710 |
* @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for |
| 711 |
* backward compatibility |
| 712 |
* @NL80211_CMD_FRAME: Management frame TX request and RX notification. This |
| 713 |
* command is used both as a request to transmit a management frame and |
| 714 |
* as an event indicating reception of a frame that was not processed in |
| 715 |
* kernel code, but is for us (i.e., which may need to be processed in a |
| 716 |
* user space application). %NL80211_ATTR_FRAME is used to specify the |
| 717 |
* frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used |
| 718 |
* to indicate on which channel the frame is to be transmitted or was |
| 719 |
* received. If this channel is not the current channel (remain-on-channel |
| 720 |
* or the operational channel) the device will switch to the given channel |
| 721 |
* and transmit the frame, optionally waiting for a response for the time |
| 722 |
* specified using %NL80211_ATTR_DURATION. When called, this operation |
| 723 |
* returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the |
| 724 |
* TX status event pertaining to the TX request. |
| 725 |
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the |
| 726 |
* management frames at CCK rate or not in 2GHz band. |
| 727 |
* %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA |
| 728 |
* counters which will be updated to the current value. This attribute |
| 729 |
* is used during CSA period. |
| 730 |
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this |
| 731 |
* command may be used with the corresponding cookie to cancel the wait |
| 732 |
* time if it is known that it is no longer necessary. This command is |
| 733 |
* also sent as an event whenever the driver has completed the off-channel |
| 734 |
* wait time. |
| 735 |
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. |
| 736 |
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame |
| 737 |
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies |
| 738 |
* the TX command and %NL80211_ATTR_FRAME includes the contents of the |
| 739 |
* frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged |
| 740 |
* the frame. |
| 741 |
* @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for |
| 742 |
* backward compatibility. |
| 743 |
* |
| 744 |
* @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE |
| 745 |
* @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE |
| 746 |
* |
| 747 |
* @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command |
| 748 |
* is used to configure connection quality monitoring notification trigger |
| 749 |
* levels. |
| 750 |
* @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This |
| 751 |
* command is used as an event to indicate the that a trigger level was |
| 752 |
* reached. |
| 753 |
* @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ |
| 754 |
* and the attributes determining channel width) the given interface |
| 755 |
* (identifed by %NL80211_ATTR_IFINDEX) shall operate on. |
| 756 |
* In case multiple channels are supported by the device, the mechanism |
| 757 |
* with which it switches channels is implementation-defined. |
| 758 |
* When a monitor interface is given, it can only switch channel while |
| 759 |
* no other interfaces are operating to avoid disturbing the operation |
| 760 |
* of any other interfaces, and other interfaces will again take |
| 761 |
* precedence when they are used. |
| 762 |
* |
| 763 |
* @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface |
| 764 |
* (no longer supported). |
| 765 |
* |
| 766 |
* @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform |
| 767 |
* multicast to unicast conversion. When enabled, all multicast packets |
| 768 |
* with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) |
| 769 |
* will be sent out to each station once with the destination (multicast) |
| 770 |
* MAC address replaced by the station's MAC address. Note that this may |
| 771 |
* break certain expectations of the receiver, e.g. the ability to drop |
| 772 |
* unicast IP packets encapsulated in multicast L2 frames, or the ability |
| 773 |
* to not send destination unreachable messages in such cases. |
| 774 |
* This can only be toggled per BSS. Configure this on an interface of |
| 775 |
* type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces |
| 776 |
* (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. |
| 777 |
* If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this |
| 778 |
* command, the feature is disabled. |
| 779 |
* |
| 780 |
* @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial |
| 781 |
* mesh config parameters may be given. |
| 782 |
* @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the |
| 783 |
* network is determined by the network interface. |
| 784 |
* |
| 785 |
* @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame |
| 786 |
* notification. This event is used to indicate that an unprotected |
| 787 |
* deauthentication frame was dropped when MFP is in use. |
| 788 |
* @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame |
| 789 |
* notification. This event is used to indicate that an unprotected |
| 790 |
* disassociation frame was dropped when MFP is in use. |
| 791 |
* |
| 792 |
* @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a |
| 793 |
* beacon or probe response from a compatible mesh peer. This is only |
| 794 |
* sent while no station information (sta_info) exists for the new peer |
| 795 |
* candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, |
| 796 |
* @NL80211_MESH_SETUP_USERSPACE_AMPE, or |
| 797 |
* @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this |
| 798 |
* notification, userspace may decide to create a new station |
| 799 |
* (@NL80211_CMD_NEW_STATION). To stop this notification from |
| 800 |
* reoccurring, the userspace authentication daemon may want to create the |
| 801 |
* new station with the AUTHENTICATED flag unset and maybe change it later |
| 802 |
* depending on the authentication result. |
| 803 |
* |
| 804 |
* @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. |
| 805 |
* @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. |
| 806 |
* Since wireless is more complex than wired ethernet, it supports |
| 807 |
* various triggers. These triggers can be configured through this |
| 808 |
* command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For |
| 809 |
* more background information, see |
| 810 |
* https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. |
| 811 |
* The @NL80211_CMD_SET_WOWLAN command can also be used as a notification |
| 812 |
* from the driver reporting the wakeup reason. In this case, the |
| 813 |
* @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason |
| 814 |
* for the wakeup, if it was caused by wireless. If it is not present |
| 815 |
* in the wakeup notification, the wireless device didn't cause the |
| 816 |
* wakeup but reports that it was woken up. |
| 817 |
* |
| 818 |
* @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver |
| 819 |
* the necessary information for supporting GTK rekey offload. This |
| 820 |
* feature is typically used during WoWLAN. The configuration data |
| 821 |
* is contained in %NL80211_ATTR_REKEY_DATA (which is nested and |
| 822 |
* contains the data in sub-attributes). After rekeying happened, |
| 823 |
* this command may also be sent by the driver as an MLME event to |
| 824 |
* inform userspace of the new replay counter. |
| 825 |
* |
| 826 |
* @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace |
| 827 |
* of PMKSA caching dandidates. |
| 828 |
* |
| 829 |
* @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). |
| 830 |
* In addition, this can be used as an event to request userspace to take |
| 831 |
* actions on TDLS links (set up a new link or tear down an existing one). |
| 832 |
* In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested |
| 833 |
* operation, %NL80211_ATTR_MAC contains the peer MAC address, and |
| 834 |
* %NL80211_ATTR_REASON_CODE the reason code to be used (only with |
| 835 |
* %NL80211_TDLS_TEARDOWN). |
| 836 |
* @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The |
| 837 |
* %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be |
| 838 |
* sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as |
| 839 |
* 802.11 management frames, while TDLS action codes (802.11-2012 |
| 840 |
* 8.5.13.1) will be encapsulated and sent as data frames. The currently |
| 841 |
* supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES |
| 842 |
* and the currently supported TDLS actions codes are given in |
| 843 |
* &enum ieee80211_tdls_actioncode. |
| 844 |
* |
| 845 |
* @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP |
| 846 |
* (or GO) interface (i.e. hostapd) to ask for unexpected frames to |
| 847 |
* implement sending deauth to stations that send unexpected class 3 |
| 848 |
* frames. Also used as the event sent by the kernel when such a frame |
| 849 |
* is received. |
| 850 |
* For the event, the %NL80211_ATTR_MAC attribute carries the TA and |
| 851 |
* other attributes like the interface index are present. |
| 852 |
* If used as the command it must have an interface index and you can |
| 853 |
* only unsubscribe from the event by closing the socket. Subscription |
| 854 |
* is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. |
| 855 |
* |
| 856 |
* @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the |
| 857 |
* associated station identified by %NL80211_ATTR_MAC sent a 4addr frame |
| 858 |
* and wasn't already in a 4-addr VLAN. The event will be sent similarly |
| 859 |
* to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. |
| 860 |
* |
| 861 |
* @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface |
| 862 |
* by sending a null data frame to it and reporting when the frame is |
| 863 |
* acknowleged. This is used to allow timing out inactive clients. Uses |
| 864 |
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a |
| 865 |
* direct reply with an %NL80211_ATTR_COOKIE that is later used to match |
| 866 |
* up the event with the request. The event includes the same data and |
| 867 |
* has %NL80211_ATTR_ACK set if the frame was ACKed. |
| 868 |
* |
| 869 |
* @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from |
| 870 |
* other BSSes when any interfaces are in AP mode. This helps implement |
| 871 |
* OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME |
| 872 |
* messages. Note that per PHY only one application may register. |
| 873 |
* |
| 874 |
* @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether |
| 875 |
* No Acknowledgement Policy should be applied. |
| 876 |
* |
| 877 |
* @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels |
| 878 |
* independently of the userspace SME, send this event indicating |
| 879 |
* %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the |
| 880 |
* attributes determining channel width. This indication may also be |
| 881 |
* sent when a remotely-initiated switch (e.g., when a STA receives a CSA |
| 882 |
* from the remote AP) is completed; |
| 883 |
* |
| 884 |
* @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch |
| 885 |
* has been started on an interface, regardless of the initiator |
| 886 |
* (ie. whether it was requested from a remote device or |
| 887 |
* initiated on our own). It indicates that |
| 888 |
* %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ |
| 889 |
* after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may |
| 890 |
* decide to react to this indication by requesting other |
| 891 |
* interfaces to change channel as well. |
| 892 |
* |
| 893 |
* @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by |
| 894 |
* its %NL80211_ATTR_WDEV identifier. It must have been created with |
| 895 |
* %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the |
| 896 |
* P2P Device can be used for P2P operations, e.g. remain-on-channel and |
| 897 |
* public action frame TX. |
| 898 |
* @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by |
| 899 |
* its %NL80211_ATTR_WDEV identifier. |
| 900 |
* |
| 901 |
* @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to |
| 902 |
* notify userspace that AP has rejected the connection request from a |
| 903 |
* station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON |
| 904 |
* is used for this. |
| 905 |
* |
| 906 |
* @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames |
| 907 |
* for IBSS or MESH vif. |
| 908 |
* |
| 909 |
* @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. |
| 910 |
* This is to be used with the drivers advertising the support of MAC |
| 911 |
* address based access control. List of MAC addresses is passed in |
| 912 |
* %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in |
| 913 |
* %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it |
| 914 |
* is not already done. The new list will replace any existing list. Driver |
| 915 |
* will clear its ACL when the list of MAC addresses passed is empty. This |
| 916 |
* command is used in AP/P2P GO mode. Driver has to make sure to clear its |
| 917 |
* ACL list during %NL80211_CMD_STOP_AP. |
| 918 |
* |
| 919 |
* @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once |
| 920 |
* a radar is detected or the channel availability scan (CAC) has finished |
| 921 |
* or was aborted, or a radar was detected, usermode will be notified with |
| 922 |
* this event. This command is also used to notify userspace about radars |
| 923 |
* while operating on this channel. |
| 924 |
* %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the |
| 925 |
* event. |
| 926 |
* |
| 927 |
* @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, |
| 928 |
* i.e. features for the nl80211 protocol rather than device features. |
| 929 |
* Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. |
| 930 |
* |
| 931 |
* @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition |
| 932 |
* Information Element to the WLAN driver |
| 933 |
* |
| 934 |
* @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver |
| 935 |
* to the supplicant. This will carry the target AP's MAC address along |
| 936 |
* with the relevant Information Elements. This event is used to report |
| 937 |
* received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). |
| 938 |
* |
| 939 |
* @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running |
| 940 |
* a critical protocol that needs more reliability in the connection to |
| 941 |
* complete. |
| 942 |
* |
| 943 |
* @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can |
| 944 |
* return back to normal. |
| 945 |
* |
| 946 |
* @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. |
| 947 |
* @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. |
| 948 |
* |
| 949 |
* @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the |
| 950 |
* new channel information (Channel Switch Announcement - CSA) |
| 951 |
* in the beacon for some time (as defined in the |
| 952 |
* %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the |
| 953 |
* new channel. Userspace provides the new channel information (using |
| 954 |
* %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel |
| 955 |
* width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform |
| 956 |
* other station that transmission must be blocked until the channel |
| 957 |
* switch is complete. |
| 958 |
* |
| 959 |
* @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified |
| 960 |
* by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in |
| 961 |
* %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in |
| 962 |
* %NL80211_ATTR_VENDOR_DATA. |
| 963 |
* For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is |
| 964 |
* used in the wiphy data as a nested attribute containing descriptions |
| 965 |
* (&struct nl80211_vendor_cmd_info) of the supported vendor commands. |
| 966 |
* This may also be sent as an event with the same attributes. |
| 967 |
* |
| 968 |
* @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. |
| 969 |
* The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If |
| 970 |
* that attribute is not included, QoS mapping is disabled. Since this |
| 971 |
* QoS mapping is relevant for IP packets, it is only valid during an |
| 972 |
* association. This is cleared on disassociation and AP restart. |
| 973 |
* |
| 974 |
* @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given |
| 975 |
* %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO |
| 976 |
* and %NL80211_ATTR_ADMITTED_TIME parameters. |
| 977 |
* Note that the action frame handshake with the AP shall be handled by |
| 978 |
* userspace via the normal management RX/TX framework, this only sets |
| 979 |
* up the TX TS in the driver/device. |
| 980 |
* If the admitted time attribute is not added then the request just checks |
| 981 |
* if a subsequent setup could be successful, the intent is to use this to |
| 982 |
* avoid setting up a session with the AP when local restrictions would |
| 983 |
* make that impossible. However, the subsequent "real" setup may still |
| 984 |
* fail even if the check was successful. |
| 985 |
* @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID |
| 986 |
* and %NL80211_ATTR_MAC parameters. It isn't necessary to call this |
| 987 |
* before removing a station entry entirely, or before disassociating |
| 988 |
* or similar, cleanup will happen in the driver/device in this case. |
| 989 |
* |
| 990 |
* @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to |
| 991 |
* destination %NL80211_ATTR_MAC on the interface identified by |
| 992 |
* %NL80211_ATTR_IFINDEX. |
| 993 |
* |
| 994 |
* @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and |
| 995 |
* bandwidth of a channel must be given. |
| 996 |
* @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the |
| 997 |
* network is determined by the network interface. |
| 998 |
* |
| 999 |
* @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, |
| 1000 |
* identified by the %NL80211_ATTR_MAC parameter. A target channel is |
| 1001 |
* provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining |
| 1002 |
* channel width/type. The target operating class is given via |
| 1003 |
* %NL80211_ATTR_OPER_CLASS. |
| 1004 |
* The driver is responsible for continually initiating channel-switching |
| 1005 |
* operations and returning to the base channel for communication with the |
| 1006 |
* AP. |
| 1007 |
* @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS |
| 1008 |
* peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel |
| 1009 |
* when this command completes. |
| 1010 |
* |
| 1011 |
* @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used |
| 1012 |
* as an event to indicate changes for devices with wiphy-specific regdom |
| 1013 |
* management. |
| 1014 |
* |
| 1015 |
* @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is |
| 1016 |
* not running. The driver indicates the status of the scan through |
| 1017 |
* cfg80211_scan_done(). |
| 1018 |
* |
| 1019 |
* @NL80211_CMD_START_NAN: Start NAN operation, identified by its |
| 1020 |
* %NL80211_ATTR_WDEV interface. This interface must have been |
| 1021 |
* previously created with %NL80211_CMD_NEW_INTERFACE. After it |
| 1022 |
* has been started, the NAN interface will create or join a |
| 1023 |
* cluster. This command must have a valid |
| 1024 |
* %NL80211_ATTR_NAN_MASTER_PREF attribute and optional |
| 1025 |
* %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is |
| 1026 |
* omitted or set to 0, it means don't-care and the device will |
| 1027 |
* decide what to use. After this command NAN functions can be |
| 1028 |
* added. |
| 1029 |
* @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by |
| 1030 |
* its %NL80211_ATTR_WDEV interface. |
| 1031 |
* @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined |
| 1032 |
* with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this |
| 1033 |
* operation returns the strictly positive and unique instance id |
| 1034 |
* (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) |
| 1035 |
* of the function upon success. |
| 1036 |
* Since instance ID's can be re-used, this cookie is the right |
| 1037 |
* way to identify the function. This will avoid races when a termination |
| 1038 |
* event is handled by the user space after it has already added a new |
| 1039 |
* function that got the same instance id from the kernel as the one |
| 1040 |
* which just terminated. |
| 1041 |
* This cookie may be used in NAN events even before the command |
| 1042 |
* returns, so userspace shouldn't process NAN events until it processes |
| 1043 |
* the response to this command. |
| 1044 |
* Look at %NL80211_ATTR_SOCKET_OWNER as well. |
| 1045 |
* @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. |
| 1046 |
* This command is also used as a notification sent when a NAN function is |
| 1047 |
* terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID |
| 1048 |
* and %NL80211_ATTR_COOKIE attributes. |
| 1049 |
* @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN |
| 1050 |
* configuration. NAN must be operational (%NL80211_CMD_START_NAN |
| 1051 |
* was executed). It must contain at least one of the following |
| 1052 |
* attributes: %NL80211_ATTR_NAN_MASTER_PREF, |
| 1053 |
* %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the |
| 1054 |
* current configuration is not changed. If it is present but |
| 1055 |
* set to zero, the configuration is changed to don't-care |
| 1056 |
* (i.e. the device can decide what to do). |
| 1057 |
* @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. |
| 1058 |
* This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and |
| 1059 |
* %NL80211_ATTR_COOKIE. |
| 1060 |
* |
| 1061 |
* @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters |
| 1062 |
* for subsequent roaming cases if the driver or firmware uses internal |
| 1063 |
* BSS selection. This command can be issued only while connected and it |
| 1064 |
* does not result in a change for the current association. Currently, |
| 1065 |
* only the %NL80211_ATTR_IE data is used and updated with this command. |
| 1066 |
* |
| 1067 |
* @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 |
| 1068 |
* for the given authenticator address (specified with %NL80211_ATTR_MAC). |
| 1069 |
* When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the |
| 1070 |
* PMK-R0, otherwise it specifies the PMK. |
| 1071 |
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously |
| 1072 |
* configured PMK for the authenticator address identified by |
| 1073 |
* %NL80211_ATTR_MAC. |
| 1074 |
* @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was |
| 1075 |
* completed successfully. Drivers that support 4 way handshake offload |
| 1076 |
* should send this event after indicating 802.1X FT assocation with |
| 1077 |
* %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT |
| 1078 |
* should be indicated instead. |
| 1079 |
* @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request |
| 1080 |
* and RX notification. This command is used both as a request to transmit |
| 1081 |
* a control port frame and as a notification that a control port frame |
| 1082 |
* has been received. %NL80211_ATTR_FRAME is used to specify the |
| 1083 |
* frame contents. The frame is the raw EAPoL data, without ethernet or |
| 1084 |
* 802.11 headers. |
| 1085 |
* When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
| 1086 |
* %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added |
| 1087 |
* indicating the protocol type of the received frame; whether the frame |
| 1088 |
* was received unencrypted and the MAC address of the peer respectively. |
| 1089 |
* |
| 1090 |
* @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. |
| 1091 |
* |
| 1092 |
* @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host |
| 1093 |
* drivers that do not define separate commands for authentication and |
| 1094 |
* association, but rely on user space for the authentication to happen. |
| 1095 |
* This interface acts both as the event request (driver to user space) |
| 1096 |
* to trigger the authentication and command response (userspace to |
| 1097 |
* driver) to indicate the authentication status. |
| 1098 |
* |
| 1099 |
* User space uses the %NL80211_CMD_CONNECT command to the host driver to |
| 1100 |
* trigger a connection. The host driver selects a BSS and further uses |
| 1101 |
* this interface to offload only the authentication part to the user |
| 1102 |
* space. Authentication frames are passed between the driver and user |
| 1103 |
* space through the %NL80211_CMD_FRAME interface. Host driver proceeds |
| 1104 |
* further with the association after getting successful authentication |
| 1105 |
* status. User space indicates the authentication status through |
| 1106 |
* %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH |
| 1107 |
* command interface. |
| 1108 |
* |
| 1109 |
* Host driver reports this status on an authentication failure to the |
| 1110 |
* user space through the connect result as the user space would have |
| 1111 |
* initiated the connection through the connect request. |
| 1112 |
* |
| 1113 |
* @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's |
| 1114 |
* ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, |
| 1115 |
* %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its |
| 1116 |
* address(specified in %NL80211_ATTR_MAC). |
| 1117 |
* |
| 1118 |
* @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in |
| 1119 |
* the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. |
| 1120 |
* |
| 1121 |
* @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) |
| 1122 |
* with the given parameters, which are encapsulated in the nested |
| 1123 |
* %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address |
| 1124 |
* randomization may be enabled and configured by specifying the |
| 1125 |
* %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. |
| 1126 |
* If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. |
| 1127 |
* A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in |
| 1128 |
* the netlink extended ack message. |
| 1129 |
* |
| 1130 |
* To cancel a measurement, close the socket that requested it. |
| 1131 |
* |
| 1132 |
* Measurement results are reported to the socket that requested the |
| 1133 |
* measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they |
| 1134 |
* become available, so applications must ensure a large enough socket |
| 1135 |
* buffer size. |
| 1136 |
* |
| 1137 |
* Depending on driver support it may or may not be possible to start |
| 1138 |
* multiple concurrent measurements. |
| 1139 |
* @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the |
| 1140 |
* result notification from the driver to the requesting socket. |
| 1141 |
* @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that |
| 1142 |
* the measurement completed, using the measurement cookie |
| 1143 |
* (%NL80211_ATTR_COOKIE). |
| 1144 |
* |
| 1145 |
* @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was |
| 1146 |
* detected and reported by a neighboring device on the channel |
| 1147 |
* indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes |
| 1148 |
* determining the width and type. |
| 1149 |
* |
| 1150 |
* @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to |
| 1151 |
* offload OWE processing to user space. This intends to support |
| 1152 |
* OWE AKM by the host drivers that implement SME but rely |
| 1153 |
* on the user space for the cryptographic/DH IE processing in AP mode. |
| 1154 |
* |
| 1155 |
* @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric |
| 1156 |
* refreshing, is that from one mesh point we be able to send some data |
| 1157 |
* frames to other mesh points which are not currently selected as a |
| 1158 |
* primary traffic path, but which are only 1 hop away. The absence of |
| 1159 |
* the primary path to the chosen node makes it necessary to apply some |
| 1160 |
* form of marking on a chosen packet stream so that the packets can be |
| 1161 |
* properly steered to the selected node for testing, and not by the |
| 1162 |
* regular mesh path lookup. Further, the packets must be of type data |
| 1163 |
* so that the rate control (often embedded in firmware) is used for |
| 1164 |
* rate selection. |
| 1165 |
* |
| 1166 |
* Here attribute %NL80211_ATTR_MAC is used to specify connected mesh |
| 1167 |
* peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame |
| 1168 |
* content. The frame is ethernet data. |
| 1169 |
* |
| 1170 |
* @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration |
| 1171 |
* is passed using %NL80211_ATTR_TID_CONFIG attribute. |
| 1172 |
* |
| 1173 |
* @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon |
| 1174 |
* frame. This event is used to indicate that a received Beacon frame was |
| 1175 |
* dropped because it did not include a valid MME MIC while beacon |
| 1176 |
* protection was enabled (BIGTK configured in station mode). |
| 1177 |
* |
| 1178 |
* @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control |
| 1179 |
* port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. |
| 1180 |
* %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME |
| 1181 |
* includes the contents of the frame. %NL80211_ATTR_ACK flag is included |
| 1182 |
* if the recipient acknowledged the frame. |
| 1183 |
* |
| 1184 |
* @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is |
| 1185 |
* passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to |
| 1186 |
* specify the wiphy index to be applied to. |
| 1187 |
* |
| 1188 |
* @NL80211_CMD_MAX: highest used command number |
| 1189 |
* @__NL80211_CMD_AFTER_LAST: internal use |
| 1190 |
*/ |
| 1191 |
enum nl80211_commands { |
| 1192 |
/* don't change the order or add anything between, this is ABI! */ |
| 1193 |
NL80211_CMD_UNSPEC, |
| 1194 |
|
| 1195 |
NL80211_CMD_GET_WIPHY, /* can dump */ |
| 1196 |
NL80211_CMD_SET_WIPHY, |
| 1197 |
NL80211_CMD_NEW_WIPHY, |
| 1198 |
NL80211_CMD_DEL_WIPHY, |
| 1199 |
|
| 1200 |
NL80211_CMD_GET_INTERFACE, /* can dump */ |
| 1201 |
NL80211_CMD_SET_INTERFACE, |
| 1202 |
NL80211_CMD_NEW_INTERFACE, |
| 1203 |
NL80211_CMD_DEL_INTERFACE, |
| 1204 |
|
| 1205 |
NL80211_CMD_GET_KEY, |
| 1206 |
NL80211_CMD_SET_KEY, |
| 1207 |
NL80211_CMD_NEW_KEY, |
| 1208 |
NL80211_CMD_DEL_KEY, |
| 1209 |
|
| 1210 |
NL80211_CMD_GET_BEACON, |
| 1211 |
NL80211_CMD_SET_BEACON, |
| 1212 |
NL80211_CMD_START_AP, |
| 1213 |
NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, |
| 1214 |
NL80211_CMD_STOP_AP, |
| 1215 |
NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, |
| 1216 |
|
| 1217 |
NL80211_CMD_GET_STATION, |
| 1218 |
NL80211_CMD_SET_STATION, |
| 1219 |
NL80211_CMD_NEW_STATION, |
| 1220 |
NL80211_CMD_DEL_STATION, |
| 1221 |
|
| 1222 |
NL80211_CMD_GET_MPATH, |
| 1223 |
NL80211_CMD_SET_MPATH, |
| 1224 |
NL80211_CMD_NEW_MPATH, |
| 1225 |
NL80211_CMD_DEL_MPATH, |
| 1226 |
|
| 1227 |
NL80211_CMD_SET_BSS, |
| 1228 |
|
| 1229 |
NL80211_CMD_SET_REG, |
| 1230 |
NL80211_CMD_REQ_SET_REG, |
| 1231 |
|
| 1232 |
NL80211_CMD_GET_MESH_CONFIG, |
| 1233 |
NL80211_CMD_SET_MESH_CONFIG, |
| 1234 |
|
| 1235 |
NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, |
| 1236 |
|
| 1237 |
NL80211_CMD_GET_REG, |
| 1238 |
|
| 1239 |
NL80211_CMD_GET_SCAN, |
| 1240 |
NL80211_CMD_TRIGGER_SCAN, |
| 1241 |
NL80211_CMD_NEW_SCAN_RESULTS, |
| 1242 |
NL80211_CMD_SCAN_ABORTED, |
| 1243 |
|
| 1244 |
NL80211_CMD_REG_CHANGE, |
| 1245 |
|
| 1246 |
NL80211_CMD_AUTHENTICATE, |
| 1247 |
NL80211_CMD_ASSOCIATE, |
| 1248 |
NL80211_CMD_DEAUTHENTICATE, |
| 1249 |
NL80211_CMD_DISASSOCIATE, |
| 1250 |
|
| 1251 |
NL80211_CMD_MICHAEL_MIC_FAILURE, |
| 1252 |
|
| 1253 |
NL80211_CMD_REG_BEACON_HINT, |
| 1254 |
|
| 1255 |
NL80211_CMD_JOIN_IBSS, |
| 1256 |
NL80211_CMD_LEAVE_IBSS, |
| 1257 |
|
| 1258 |
NL80211_CMD_TESTMODE, |
| 1259 |
|
| 1260 |
NL80211_CMD_CONNECT, |
| 1261 |
NL80211_CMD_ROAM, |
| 1262 |
NL80211_CMD_DISCONNECT, |
| 1263 |
|
| 1264 |
NL80211_CMD_SET_WIPHY_NETNS, |
| 1265 |
|
| 1266 |
NL80211_CMD_GET_SURVEY, |
| 1267 |
NL80211_CMD_NEW_SURVEY_RESULTS, |
| 1268 |
|
| 1269 |
NL80211_CMD_SET_PMKSA, |
| 1270 |
NL80211_CMD_DEL_PMKSA, |
| 1271 |
NL80211_CMD_FLUSH_PMKSA, |
| 1272 |
|
| 1273 |
NL80211_CMD_REMAIN_ON_CHANNEL, |
| 1274 |
NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, |
| 1275 |
|
| 1276 |
NL80211_CMD_SET_TX_BITRATE_MASK, |
| 1277 |
|
| 1278 |
NL80211_CMD_REGISTER_FRAME, |
| 1279 |
NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, |
| 1280 |
NL80211_CMD_FRAME, |
| 1281 |
NL80211_CMD_ACTION = NL80211_CMD_FRAME, |
| 1282 |
NL80211_CMD_FRAME_TX_STATUS, |
| 1283 |
NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, |
| 1284 |
|
| 1285 |
NL80211_CMD_SET_POWER_SAVE, |
| 1286 |
NL80211_CMD_GET_POWER_SAVE, |
| 1287 |
|
| 1288 |
NL80211_CMD_SET_CQM, |
| 1289 |
NL80211_CMD_NOTIFY_CQM, |
| 1290 |
|
| 1291 |
NL80211_CMD_SET_CHANNEL, |
| 1292 |
NL80211_CMD_SET_WDS_PEER, |
| 1293 |
|
| 1294 |
NL80211_CMD_FRAME_WAIT_CANCEL, |
| 1295 |
|
| 1296 |
NL80211_CMD_JOIN_MESH, |
| 1297 |
NL80211_CMD_LEAVE_MESH, |
| 1298 |
|
| 1299 |
NL80211_CMD_UNPROT_DEAUTHENTICATE, |
| 1300 |
NL80211_CMD_UNPROT_DISASSOCIATE, |
| 1301 |
|
| 1302 |
NL80211_CMD_NEW_PEER_CANDIDATE, |
| 1303 |
|
| 1304 |
NL80211_CMD_GET_WOWLAN, |
| 1305 |
NL80211_CMD_SET_WOWLAN, |
| 1306 |
|
| 1307 |
NL80211_CMD_START_SCHED_SCAN, |
| 1308 |
NL80211_CMD_STOP_SCHED_SCAN, |
| 1309 |
NL80211_CMD_SCHED_SCAN_RESULTS, |
| 1310 |
NL80211_CMD_SCHED_SCAN_STOPPED, |
| 1311 |
|
| 1312 |
NL80211_CMD_SET_REKEY_OFFLOAD, |
| 1313 |
|
| 1314 |
NL80211_CMD_PMKSA_CANDIDATE, |
| 1315 |
|
| 1316 |
NL80211_CMD_TDLS_OPER, |
| 1317 |
NL80211_CMD_TDLS_MGMT, |
| 1318 |
|
| 1319 |
NL80211_CMD_UNEXPECTED_FRAME, |
| 1320 |
|
| 1321 |
NL80211_CMD_PROBE_CLIENT, |
| 1322 |
|
| 1323 |
NL80211_CMD_REGISTER_BEACONS, |
| 1324 |
|
| 1325 |
NL80211_CMD_UNEXPECTED_4ADDR_FRAME, |
| 1326 |
|
| 1327 |
NL80211_CMD_SET_NOACK_MAP, |
| 1328 |
|
| 1329 |
NL80211_CMD_CH_SWITCH_NOTIFY, |
| 1330 |
|
| 1331 |
NL80211_CMD_START_P2P_DEVICE, |
| 1332 |
NL80211_CMD_STOP_P2P_DEVICE, |
| 1333 |
|
| 1334 |
NL80211_CMD_CONN_FAILED, |
| 1335 |
|
| 1336 |
NL80211_CMD_SET_MCAST_RATE, |
| 1337 |
|
| 1338 |
NL80211_CMD_SET_MAC_ACL, |
| 1339 |
|
| 1340 |
NL80211_CMD_RADAR_DETECT, |
| 1341 |
|
| 1342 |
NL80211_CMD_GET_PROTOCOL_FEATURES, |
| 1343 |
|
| 1344 |
NL80211_CMD_UPDATE_FT_IES, |
| 1345 |
NL80211_CMD_FT_EVENT, |
| 1346 |
|
| 1347 |
NL80211_CMD_CRIT_PROTOCOL_START, |
| 1348 |
NL80211_CMD_CRIT_PROTOCOL_STOP, |
| 1349 |
|
| 1350 |
NL80211_CMD_GET_COALESCE, |
| 1351 |
NL80211_CMD_SET_COALESCE, |
| 1352 |
|
| 1353 |
NL80211_CMD_CHANNEL_SWITCH, |
| 1354 |
|
| 1355 |
NL80211_CMD_VENDOR, |
| 1356 |
|
| 1357 |
NL80211_CMD_SET_QOS_MAP, |
| 1358 |
|
| 1359 |
NL80211_CMD_ADD_TX_TS, |
| 1360 |
NL80211_CMD_DEL_TX_TS, |
| 1361 |
|
| 1362 |
NL80211_CMD_GET_MPP, |
| 1363 |
|
| 1364 |
NL80211_CMD_JOIN_OCB, |
| 1365 |
NL80211_CMD_LEAVE_OCB, |
| 1366 |
|
| 1367 |
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, |
| 1368 |
|
| 1369 |
NL80211_CMD_TDLS_CHANNEL_SWITCH, |
| 1370 |
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, |
| 1371 |
|
| 1372 |
NL80211_CMD_WIPHY_REG_CHANGE, |
| 1373 |
|
| 1374 |
NL80211_CMD_ABORT_SCAN, |
| 1375 |
|
| 1376 |
NL80211_CMD_START_NAN, |
| 1377 |
NL80211_CMD_STOP_NAN, |
| 1378 |
NL80211_CMD_ADD_NAN_FUNCTION, |
| 1379 |
NL80211_CMD_DEL_NAN_FUNCTION, |
| 1380 |
NL80211_CMD_CHANGE_NAN_CONFIG, |
| 1381 |
NL80211_CMD_NAN_MATCH, |
| 1382 |
|
| 1383 |
NL80211_CMD_SET_MULTICAST_TO_UNICAST, |
| 1384 |
|
| 1385 |
NL80211_CMD_UPDATE_CONNECT_PARAMS, |
| 1386 |
|
| 1387 |
NL80211_CMD_SET_PMK, |
| 1388 |
NL80211_CMD_DEL_PMK, |
| 1389 |
|
| 1390 |
NL80211_CMD_PORT_AUTHORIZED, |
| 1391 |
|
| 1392 |
NL80211_CMD_RELOAD_REGDB, |
| 1393 |
|
| 1394 |
NL80211_CMD_EXTERNAL_AUTH, |
| 1395 |
|
| 1396 |
NL80211_CMD_STA_OPMODE_CHANGED, |
| 1397 |
|
| 1398 |
NL80211_CMD_CONTROL_PORT_FRAME, |
| 1399 |
|
| 1400 |
NL80211_CMD_GET_FTM_RESPONDER_STATS, |
| 1401 |
|
| 1402 |
NL80211_CMD_PEER_MEASUREMENT_START, |
| 1403 |
NL80211_CMD_PEER_MEASUREMENT_RESULT, |
| 1404 |
NL80211_CMD_PEER_MEASUREMENT_COMPLETE, |
| 1405 |
|
| 1406 |
NL80211_CMD_NOTIFY_RADAR, |
| 1407 |
|
| 1408 |
NL80211_CMD_UPDATE_OWE_INFO, |
| 1409 |
|
| 1410 |
NL80211_CMD_PROBE_MESH_LINK, |
| 1411 |
|
| 1412 |
NL80211_CMD_SET_TID_CONFIG, |
| 1413 |
|
| 1414 |
NL80211_CMD_UNPROT_BEACON, |
| 1415 |
|
| 1416 |
NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, |
| 1417 |
|
| 1418 |
NL80211_CMD_SET_SAR_SPECS, |
| 1419 |
|
| 1420 |
/* add new commands above here */ |
| 1421 |
|
| 1422 |
/* used to define NL80211_CMD_MAX below */ |
| 1423 |
__NL80211_CMD_AFTER_LAST, |
| 1424 |
NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 |
| 1425 |
}; |
| 1426 |
|
| 1427 |
/* |
| 1428 |
* Allow user space programs to use #ifdef on new commands by defining them |
| 1429 |
* here |
| 1430 |
*/ |
| 1431 |
#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS |
| 1432 |
#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE |
| 1433 |
#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE |
| 1434 |
#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE |
| 1435 |
#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE |
| 1436 |
#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE |
| 1437 |
#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE |
| 1438 |
#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT |
| 1439 |
|
| 1440 |
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS |
| 1441 |
|
| 1442 |
/* source-level API compatibility */ |
| 1443 |
#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG |
| 1444 |
#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG |
| 1445 |
#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE |
| 1446 |
|
| 1447 |
/** |
| 1448 |
* enum nl80211_attrs - nl80211 netlink attributes |
| 1449 |
* |
| 1450 |
* @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors |
| 1451 |
* |
| 1452 |
* @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. |
| 1453 |
* /sys/class/ieee80211/<phyname>/index |
| 1454 |
* @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) |
| 1455 |
* @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters |
| 1456 |
* @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, |
| 1457 |
* defines the channel together with the (deprecated) |
| 1458 |
* %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes |
| 1459 |
* %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 |
| 1460 |
* and %NL80211_ATTR_CENTER_FREQ2 |
| 1461 |
* @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values |
| 1462 |
* of &enum nl80211_chan_width, describing the channel width. See the |
| 1463 |
* documentation of the enum for more information. |
| 1464 |
* @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the |
| 1465 |
* channel, used for anything but 20 MHz bandwidth. In S1G this is the |
| 1466 |
* operating channel center frequency. |
| 1467 |
* @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the |
| 1468 |
* channel, used only for 80+80 MHz bandwidth |
| 1469 |
* @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ |
| 1470 |
* if HT20 or HT40 are to be used (i.e., HT disabled if not included): |
| 1471 |
* NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including |
| 1472 |
* this attribute) |
| 1473 |
* NL80211_CHAN_HT20 = HT20 only |
| 1474 |
* NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel |
| 1475 |
* NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel |
| 1476 |
* This attribute is now deprecated. |
| 1477 |
* @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is |
| 1478 |
* less than or equal to the RTS threshold; allowed range: 1..255; |
| 1479 |
* dot11ShortRetryLimit; u8 |
| 1480 |
* @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is |
| 1481 |
* greater than the RTS threshold; allowed range: 1..255; |
| 1482 |
* dot11ShortLongLimit; u8 |
| 1483 |
* @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum |
| 1484 |
* length in octets for frames; allowed range: 256..8000, disable |
| 1485 |
* fragmentation with (u32)-1; dot11FragmentationThreshold; u32 |
| 1486 |
* @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length |
| 1487 |
* larger than or equal to this use RTS/CTS handshake); allowed range: |
| 1488 |
* 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 |
| 1489 |
* @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 |
| 1490 |
* section 7.3.2.9; dot11CoverageClass; u8 |
| 1491 |
* |
| 1492 |
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on |
| 1493 |
* @NL80211_ATTR_IFNAME: network interface name |
| 1494 |
* @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype |
| 1495 |
* |
| 1496 |
* @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices |
| 1497 |
* that don't have a netdev (u64) |
| 1498 |
* |
| 1499 |
* @NL80211_ATTR_MAC: MAC address (various uses) |
| 1500 |
* |
| 1501 |
* @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of |
| 1502 |
* 16 bytes encryption key followed by 8 bytes each for TX and RX MIC |
| 1503 |
* keys |
| 1504 |
* @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) |
| 1505 |
* @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 |
| 1506 |
* section 7.3.2.25.1, e.g. 0x000FAC04) |
| 1507 |
* @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and |
| 1508 |
* CCMP keys, each six bytes in little endian |
| 1509 |
* @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key |
| 1510 |
* @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the |
| 1511 |
* default management key |
| 1512 |
* @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or |
| 1513 |
* other commands, indicates which pairwise cipher suites are used |
| 1514 |
* @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or |
| 1515 |
* other commands, indicates which group cipher suite is used |
| 1516 |
* |
| 1517 |
* @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU |
| 1518 |
* @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing |
| 1519 |
* @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE |
| 1520 |
* @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE |
| 1521 |
* |
| 1522 |
* @NL80211_ATTR_STA_AID: Association ID for the station (u16) |
| 1523 |
* @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of |
| 1524 |
* &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) |
| 1525 |
* @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by |
| 1526 |
* IEEE 802.11 7.3.1.6 (u16). |
| 1527 |
* @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported |
| 1528 |
* rates as defined by IEEE 802.11 7.3.2.2 but without the length |
| 1529 |
* restriction (at most %NL80211_MAX_SUPP_RATES). |
| 1530 |
* @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station |
| 1531 |
* to, or the AP interface the station was originally added to. |
| 1532 |
* @NL80211_ATTR_STA_INFO: information about a station, part of station info |
| 1533 |
* given for %NL80211_CMD_GET_STATION, nested attribute containing |
| 1534 |
* info as possible, see &enum nl80211_sta_info. |
| 1535 |
* |
| 1536 |
* @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, |
| 1537 |
* consisting of a nested array. |
| 1538 |
* |
| 1539 |
* @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). |
| 1540 |
* @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link |
| 1541 |
* (see &enum nl80211_plink_action). |
| 1542 |
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. |
| 1543 |
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path |
| 1544 |
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at |
| 1545 |
* &enum nl80211_mpath_info. |
| 1546 |
* |
| 1547 |
* @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of |
| 1548 |
* &enum nl80211_mntr_flags. |
| 1549 |
* |
| 1550 |
* @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the |
| 1551 |
* current regulatory domain should be set to or is already set to. |
| 1552 |
* For example, 'CR', for Costa Rica. This attribute is used by the kernel |
| 1553 |
* to query the CRDA to retrieve one regulatory domain. This attribute can |
| 1554 |
* also be used by userspace to query the kernel for the currently set |
| 1555 |
* regulatory domain. We chose an alpha2 as that is also used by the |
| 1556 |
* IEEE-802.11 country information element to identify a country. |
| 1557 |
* Users can also simply ask the wireless core to set regulatory domain |
| 1558 |
* to a specific alpha2. |
| 1559 |
* @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory |
| 1560 |
* rules. |
| 1561 |
* |
| 1562 |
* @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) |
| 1563 |
* @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled |
| 1564 |
* (u8, 0 or 1) |
| 1565 |
* @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled |
| 1566 |
* (u8, 0 or 1) |
| 1567 |
* @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic |
| 1568 |
* rates in format defined by IEEE 802.11 7.3.2.2 but without the length |
| 1569 |
* restriction (at most %NL80211_MAX_SUPP_RATES). |
| 1570 |
* |
| 1571 |
* @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from |
| 1572 |
* association request when used with NL80211_CMD_NEW_STATION) |
| 1573 |
* |
| 1574 |
* @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all |
| 1575 |
* supported interface types, each a flag attribute with the number |
| 1576 |
* of the interface mode. |
| 1577 |
* |
| 1578 |
* @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for |
| 1579 |
* %NL80211_CMD_SET_MGMT_EXTRA_IE. |
| 1580 |
* |
| 1581 |
* @NL80211_ATTR_IE: Information element(s) data (used, e.g., with |
| 1582 |
* %NL80211_CMD_SET_MGMT_EXTRA_IE). |
| 1583 |
* |
| 1584 |
* @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with |
| 1585 |
* a single scan request, a wiphy attribute. |
| 1586 |
* @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can |
| 1587 |
* scan with a single scheduled scan request, a wiphy attribute. |
| 1588 |
* @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements |
| 1589 |
* that can be added to a scan request |
| 1590 |
* @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information |
| 1591 |
* elements that can be added to a scheduled scan request |
| 1592 |
* @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be |
| 1593 |
* used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. |
| 1594 |
* |
| 1595 |
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) |
| 1596 |
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive |
| 1597 |
* scanning and include a zero-length SSID (wildcard) for wildcard scan |
| 1598 |
* @NL80211_ATTR_BSS: scan result BSS |
| 1599 |
* |
| 1600 |
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain |
| 1601 |
* currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* |
| 1602 |
* @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently |
| 1603 |
* set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) |
| 1604 |
* |
| 1605 |
* @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies |
| 1606 |
* an array of command numbers (i.e. a mapping index to command number) |
| 1607 |
* that the driver for the given wiphy supports. |
| 1608 |
* |
| 1609 |
* @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header |
| 1610 |
* and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and |
| 1611 |
* NL80211_CMD_ASSOCIATE events |
| 1612 |
* @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) |
| 1613 |
* @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, |
| 1614 |
* represented as a u32 |
| 1615 |
* @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and |
| 1616 |
* %NL80211_CMD_DISASSOCIATE, u16 |
| 1617 |
* |
| 1618 |
* @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as |
| 1619 |
* a u32 |
| 1620 |
* |
| 1621 |
* @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change |
| 1622 |
* due to considerations from a beacon hint. This attribute reflects |
| 1623 |
* the state of the channel _before_ the beacon hint processing. This |
| 1624 |
* attributes consists of a nested attribute containing |
| 1625 |
* NL80211_FREQUENCY_ATTR_* |
| 1626 |
* @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change |
| 1627 |
* due to considerations from a beacon hint. This attribute reflects |
| 1628 |
* the state of the channel _after_ the beacon hint processing. This |
| 1629 |
* attributes consists of a nested attribute containing |
| 1630 |
* NL80211_FREQUENCY_ATTR_* |
| 1631 |
* |
| 1632 |
* @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported |
| 1633 |
* cipher suites |
| 1634 |
* |
| 1635 |
* @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look |
| 1636 |
* for other networks on different channels |
| 1637 |
* |
| 1638 |
* @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this |
| 1639 |
* is used, e.g., with %NL80211_CMD_AUTHENTICATE event |
| 1640 |
* |
| 1641 |
* @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is |
| 1642 |
* used for the association (&enum nl80211_mfp, represented as a u32); |
| 1643 |
* this attribute can be used with %NL80211_CMD_ASSOCIATE and |
| 1644 |
* %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for |
| 1645 |
* %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it |
| 1646 |
* must have decided whether to use management frame protection or not. |
| 1647 |
* Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will |
| 1648 |
* let the driver (or the firmware) decide whether to use MFP or not. |
| 1649 |
* |
| 1650 |
* @NL80211_ATTR_STA_FLAGS2: Attribute containing a |
| 1651 |
* &struct nl80211_sta_flag_update. |
| 1652 |
* |
| 1653 |
* @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls |
| 1654 |
* IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in |
| 1655 |
* station mode. If the flag is included in %NL80211_CMD_ASSOCIATE |
| 1656 |
* request, the driver will assume that the port is unauthorized until |
| 1657 |
* authorized by user space. Otherwise, port is marked authorized by |
| 1658 |
* default in station mode. |
| 1659 |
* @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the |
| 1660 |
* ethertype that will be used for key negotiation. It can be |
| 1661 |
* specified with the associate and connect commands. If it is not |
| 1662 |
* specified, the value defaults to 0x888E (PAE, 802.1X). This |
| 1663 |
* attribute is also used as a flag in the wiphy information to |
| 1664 |
* indicate that protocols other than PAE are supported. |
| 1665 |
* @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with |
| 1666 |
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom |
| 1667 |
* ethertype frames used for key negotiation must not be encrypted. |
| 1668 |
* @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control |
| 1669 |
* port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) |
| 1670 |
* will be sent directly to the network interface or sent via the NL80211 |
| 1671 |
* socket. If this attribute is missing, then legacy behavior of sending |
| 1672 |
* control port frames directly to the network interface is used. If the |
| 1673 |
* flag is included, then control port frames are sent over NL80211 instead |
| 1674 |
* using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is |
| 1675 |
* to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER |
| 1676 |
* flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth |
| 1677 |
* frames are not forwared over the control port. |
| 1678 |
* |
| 1679 |
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. |
| 1680 |
* We recommend using nested, driver-specific attributes within this. |
| 1681 |
* |
| 1682 |
* @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT |
| 1683 |
* event was due to the AP disconnecting the station, and not due to |
| 1684 |
* a local disconnect request. |
| 1685 |
* @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT |
| 1686 |
* event (u16) |
| 1687 |
* @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating |
| 1688 |
* that protected APs should be used. This is also used with NEW_BEACON to |
| 1689 |
* indicate that the BSS is to use protection. |
| 1690 |
* |
| 1691 |
* @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON |
| 1692 |
* to indicate which unicast key ciphers will be used with the connection |
| 1693 |
* (an array of u32). |
| 1694 |
* @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| 1695 |
* indicate which group key cipher will be used with the connection (a |
| 1696 |
* u32). |
| 1697 |
* @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| 1698 |
* indicate which WPA version(s) the AP we want to associate with is using |
| 1699 |
* (a u32 with flags from &enum nl80211_wpa_versions). |
| 1700 |
* @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| 1701 |
* indicate which key management algorithm(s) to use (an array of u32). |
| 1702 |
* This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, |
| 1703 |
* indicating the supported AKM suites, intended for specific drivers which |
| 1704 |
* implement SME and have constraints on which AKMs are supported and also |
| 1705 |
* the cases where an AKM support is offloaded to the driver/firmware. |
| 1706 |
* If there is no such notification from the driver, user space should |
| 1707 |
* assume the driver supports all the AKM suites. |
| 1708 |
* |
| 1709 |
* @NL80211_ATTR_REQ_IE: (Re)association request information elements as |
| 1710 |
* sent out by the card, for ROAM and successful CONNECT events. |
| 1711 |
* @NL80211_ATTR_RESP_IE: (Re)association response information elements as |
| 1712 |
* sent by peer, for ROAM and successful CONNECT events. |
| 1713 |
* |
| 1714 |
* @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT |
| 1715 |
* commands to specify a request to reassociate within an ESS, i.e., to use |
| 1716 |
* Reassociate Request frame (with the value of this attribute in the |
| 1717 |
* Current AP address field) instead of Association Request frame which is |
| 1718 |
* used for the initial association to an ESS. |
| 1719 |
* |
| 1720 |
* @NL80211_ATTR_KEY: key information in a nested attribute with |
| 1721 |
* %NL80211_KEY_* sub-attributes |
| 1722 |
* @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() |
| 1723 |
* and join_ibss(), key information is in a nested attribute each |
| 1724 |
* with %NL80211_KEY_* sub-attributes |
| 1725 |
* |
| 1726 |
* @NL80211_ATTR_PID: Process ID of a network namespace. |
| 1727 |
* |
| 1728 |
* @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for |
| 1729 |
* dumps. This number increases whenever the object list being |
| 1730 |
* dumped changes, and as such userspace can verify that it has |
| 1731 |
* obtained a complete and consistent snapshot by verifying that |
| 1732 |
* all dump messages contain the same generation number. If it |
| 1733 |
* changed then the list changed and the dump should be repeated |
| 1734 |
* completely from scratch. |
| 1735 |
* |
| 1736 |
* @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface |
| 1737 |
* |
| 1738 |
* @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of |
| 1739 |
* the survey response for %NL80211_CMD_GET_SURVEY, nested attribute |
| 1740 |
* containing info as possible, see &enum survey_info. |
| 1741 |
* |
| 1742 |
* @NL80211_ATTR_PMKID: PMK material for PMKSA caching. |
| 1743 |
* @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can |
| 1744 |
* cache, a wiphy attribute. |
| 1745 |
* |
| 1746 |
* @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. |
| 1747 |
* @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that |
| 1748 |
* specifies the maximum duration that can be requested with the |
| 1749 |
* remain-on-channel operation, in milliseconds, u32. |
| 1750 |
* |
| 1751 |
* @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. |
| 1752 |
* |
| 1753 |
* @NL80211_ATTR_TX_RATES: Nested set of attributes |
| 1754 |
* (enum nl80211_tx_rate_attributes) describing TX rates per band. The |
| 1755 |
* enum nl80211_band value is used as the index (nla_type() of the nested |
| 1756 |
* data. If a band is not included, it will be configured to allow all |
| 1757 |
* rates based on negotiated supported rates information. This attribute |
| 1758 |
* is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, |
| 1759 |
* and joining mesh networks (not IBSS yet). In the later case, it must |
| 1760 |
* specify just a single bitrate, which is to be used for the beacon. |
| 1761 |
* The driver must also specify support for this with the extended |
| 1762 |
* features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, |
| 1763 |
* NL80211_EXT_FEATURE_BEACON_RATE_HT, |
| 1764 |
* NL80211_EXT_FEATURE_BEACON_RATE_VHT and |
| 1765 |
* NL80211_EXT_FEATURE_BEACON_RATE_HE. |
| 1766 |
* |
| 1767 |
* @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain |
| 1768 |
* at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. |
| 1769 |
* @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the |
| 1770 |
* @NL80211_CMD_REGISTER_FRAME command. |
| 1771 |
* @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a |
| 1772 |
* nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing |
| 1773 |
* information about which frame types can be transmitted with |
| 1774 |
* %NL80211_CMD_FRAME. |
| 1775 |
* @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a |
| 1776 |
* nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing |
| 1777 |
* information about which frame types can be registered for RX. |
| 1778 |
* |
| 1779 |
* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was |
| 1780 |
* acknowledged by the recipient. |
| 1781 |
* |
| 1782 |
* @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. |
| 1783 |
* |
| 1784 |
* @NL80211_ATTR_CQM: connection quality monitor configuration in a |
| 1785 |
* nested attribute with %NL80211_ATTR_CQM_* sub-attributes. |
| 1786 |
* |
| 1787 |
* @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command |
| 1788 |
* is requesting a local authentication/association state change without |
| 1789 |
* invoking actual management frame exchange. This can be used with |
| 1790 |
* NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, |
| 1791 |
* NL80211_CMD_DISASSOCIATE. |
| 1792 |
* |
| 1793 |
* @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations |
| 1794 |
* connected to this BSS. |
| 1795 |
* |
| 1796 |
* @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See |
| 1797 |
* &enum nl80211_tx_power_setting for possible values. |
| 1798 |
* @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. |
| 1799 |
* This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING |
| 1800 |
* for non-automatic settings. |
| 1801 |
* |
| 1802 |
* @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly |
| 1803 |
* means support for per-station GTKs. |
| 1804 |
* |
| 1805 |
* @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. |
| 1806 |
* This can be used to mask out antennas which are not attached or should |
| 1807 |
* not be used for transmitting. If an antenna is not selected in this |
| 1808 |
* bitmap the hardware is not allowed to transmit on this antenna. |
| 1809 |
* |
| 1810 |
* Each bit represents one antenna, starting with antenna 1 at the first |
| 1811 |
* bit. Depending on which antennas are selected in the bitmap, 802.11n |
| 1812 |
* drivers can derive which chainmasks to use (if all antennas belonging to |
| 1813 |
* a particular chain are disabled this chain should be disabled) and if |
| 1814 |
* a chain has diversity antennas wether diversity should be used or not. |
| 1815 |
* HT capabilities (STBC, TX Beamforming, Antenna selection) can be |
| 1816 |
* derived from the available chains after applying the antenna mask. |
| 1817 |
* Non-802.11n drivers can derive wether to use diversity or not. |
| 1818 |
* Drivers may reject configurations or RX/TX mask combinations they cannot |
| 1819 |
* support by returning -EINVAL. |
| 1820 |
* |
| 1821 |
* @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. |
| 1822 |
* This can be used to mask out antennas which are not attached or should |
| 1823 |
* not be used for receiving. If an antenna is not selected in this bitmap |
| 1824 |
* the hardware should not be configured to receive on this antenna. |
| 1825 |
* For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. |
| 1826 |
* |
| 1827 |
* @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available |
| 1828 |
* for configuration as TX antennas via the above parameters. |
| 1829 |
* |
| 1830 |
* @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available |
| 1831 |
* for configuration as RX antennas via the above parameters. |
| 1832 |
* |
| 1833 |
* @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS |
| 1834 |
* |
| 1835 |
* @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be |
| 1836 |
* transmitted on another channel when the channel given doesn't match |
| 1837 |
* the current channel. If the current channel doesn't match and this |
| 1838 |
* flag isn't set, the frame will be rejected. This is also used as an |
| 1839 |
* nl80211 capability flag. |
| 1840 |
* |
| 1841 |
* @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) |
| 1842 |
* |
| 1843 |
* @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags |
| 1844 |
* attributes, specifying what a key should be set as default as. |
| 1845 |
* See &enum nl80211_key_default_types. |
| 1846 |
* |
| 1847 |
* @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be |
| 1848 |
* changed once the mesh is active. |
| 1849 |
* @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute |
| 1850 |
* containing attributes from &enum nl80211_meshconf_params. |
| 1851 |
* @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver |
| 1852 |
* allows auth frames in a mesh to be passed to userspace for processing via |
| 1853 |
* the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. |
| 1854 |
* @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in |
| 1855 |
* &enum nl80211_plink_state. Used when userspace is driving the peer link |
| 1856 |
* management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or |
| 1857 |
* @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. |
| 1858 |
* |
| 1859 |
* @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy |
| 1860 |
* capabilities, the supported WoWLAN triggers |
| 1861 |
* @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to |
| 1862 |
* indicate which WoW triggers should be enabled. This is also |
| 1863 |
* used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN |
| 1864 |
* triggers. |
| 1865 |
* |
| 1866 |
* @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan |
| 1867 |
* cycles, in msecs. |
| 1868 |
* |
| 1869 |
* @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more |
| 1870 |
* sets of attributes to match during scheduled scans. Only BSSs |
| 1871 |
* that match any of the sets will be reported. These are |
| 1872 |
* pass-thru filter rules. |
| 1873 |
* For a match to succeed, the BSS must match all attributes of a |
| 1874 |
* set. Since not every hardware supports matching all types of |
| 1875 |
* attributes, there is no guarantee that the reported BSSs are |
| 1876 |
* fully complying with the match sets and userspace needs to be |
| 1877 |
* able to ignore them by itself. |
| 1878 |
* Thus, the implementation is somewhat hardware-dependent, but |
| 1879 |
* this is only an optimization and the userspace application |
| 1880 |
* needs to handle all the non-filtered results anyway. |
| 1881 |
* If the match attributes don't make sense when combined with |
| 1882 |
* the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID |
| 1883 |
* is included in the probe request, but the match attributes |
| 1884 |
* will never let it go through), -EINVAL may be returned. |
| 1885 |
* If omitted, no filtering is done. |
| 1886 |
* |
| 1887 |
* @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported |
| 1888 |
* interface combinations. In each nested item, it contains attributes |
| 1889 |
* defined in &enum nl80211_if_combination_attrs. |
| 1890 |
* @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like |
| 1891 |
* %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that |
| 1892 |
* are managed in software: interfaces of these types aren't subject to |
| 1893 |
* any restrictions in their number or combinations. |
| 1894 |
* |
| 1895 |
* @NL80211_ATTR_REKEY_DATA: nested attribute containing the information |
| 1896 |
* necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. |
| 1897 |
* |
| 1898 |
* @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, |
| 1899 |
* nested array attribute containing an entry for each band, with the entry |
| 1900 |
* being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but |
| 1901 |
* without the length restriction (at most %NL80211_MAX_SUPP_RATES). |
| 1902 |
* |
| 1903 |
* @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon |
| 1904 |
* and Probe Response (when response to wildcard Probe Request); see |
| 1905 |
* &enum nl80211_hidden_ssid, represented as a u32 |
| 1906 |
* |
| 1907 |
* @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. |
| 1908 |
* This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to |
| 1909 |
* provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the |
| 1910 |
* driver (or firmware) replies to Probe Request frames. |
| 1911 |
* @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association |
| 1912 |
* Response frames. This is used with %NL80211_CMD_NEW_BEACON and |
| 1913 |
* %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into |
| 1914 |
* (Re)Association Response frames when the driver (or firmware) replies to |
| 1915 |
* (Re)Association Request frames. |
| 1916 |
* |
| 1917 |
* @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration |
| 1918 |
* of the station, see &enum nl80211_sta_wme_attr. |
| 1919 |
* @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working |
| 1920 |
* as AP. |
| 1921 |
* |
| 1922 |
* @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of |
| 1923 |
* roaming to another AP in the same ESS if the signal lever is low. |
| 1924 |
* |
| 1925 |
* @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching |
| 1926 |
* candidate information, see &enum nl80211_pmksa_candidate_attr. |
| 1927 |
* |
| 1928 |
* @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not |
| 1929 |
* for management frames transmission. In order to avoid p2p probe/action |
| 1930 |
* frames are being transmitted at CCK rate in 2GHz band, the user space |
| 1931 |
* applications use this attribute. |
| 1932 |
* This attribute is used with %NL80211_CMD_TRIGGER_SCAN and |
| 1933 |
* %NL80211_CMD_FRAME commands. |
| 1934 |
* |
| 1935 |
* @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup |
| 1936 |
* request, link setup confirm, link teardown, etc.). Values are |
| 1937 |
* described in the TDLS (802.11z) specification. |
| 1938 |
* @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a |
| 1939 |
* TDLS conversation between two devices. |
| 1940 |
* @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see |
| 1941 |
* &enum nl80211_tdls_operation, represented as a u8. |
| 1942 |
* @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate |
| 1943 |
* as a TDLS peer sta. |
| 1944 |
* @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown |
| 1945 |
* procedures should be performed by sending TDLS packets via |
| 1946 |
* %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be |
| 1947 |
* used for asking the driver to perform a TDLS operation. |
| 1948 |
* |
| 1949 |
* @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices |
| 1950 |
* that have AP support to indicate that they have the AP SME integrated |
| 1951 |
* with support for the features listed in this attribute, see |
| 1952 |
* &enum nl80211_ap_sme_features. |
| 1953 |
* |
| 1954 |
* @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells |
| 1955 |
* the driver to not wait for an acknowledgement. Note that due to this, |
| 1956 |
* it will also not give a status callback nor return a cookie. This is |
| 1957 |
* mostly useful for probe responses to save airtime. |
| 1958 |
* |
| 1959 |
* @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from |
| 1960 |
* &enum nl80211_feature_flags and is advertised in wiphy information. |
| 1961 |
* @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe |
| 1962 |
* requests while operating in AP-mode. |
| 1963 |
* This attribute holds a bitmap of the supported protocols for |
| 1964 |
* offloading (see &enum nl80211_probe_resp_offload_support_attr). |
| 1965 |
* |
| 1966 |
* @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire |
| 1967 |
* probe-response frame. The DA field in the 802.11 header is zero-ed out, |
| 1968 |
* to be filled by the FW. |
| 1969 |
* @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable |
| 1970 |
* this feature during association. This is a flag attribute. |
| 1971 |
* Currently only supported in mac80211 drivers. |
| 1972 |
* @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable |
| 1973 |
* this feature during association. This is a flag attribute. |
| 1974 |
* Currently only supported in mac80211 drivers. |
| 1975 |
* @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable |
| 1976 |
* this feature during association. This is a flag attribute. |
| 1977 |
* Currently only supported in mac80211 drivers. |
| 1978 |
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the |
| 1979 |
* ATTR_HT_CAPABILITY to which attention should be paid. |
| 1980 |
* Currently, only mac80211 NICs support this feature. |
| 1981 |
* The values that may be configured are: |
| 1982 |
* MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 |
| 1983 |
* AMPDU density and AMPDU factor. |
| 1984 |
* All values are treated as suggestions and may be ignored |
| 1985 |
* by the driver as required. The actual values may be seen in |
| 1986 |
* the station debugfs ht_caps file. |
| 1987 |
* |
| 1988 |
* @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country |
| 1989 |
* abides to when initiating radiation on DFS channels. A country maps |
| 1990 |
* to one DFS region. |
| 1991 |
* |
| 1992 |
* @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of |
| 1993 |
* up to 16 TIDs. |
| 1994 |
* |
| 1995 |
* @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be |
| 1996 |
* used by the drivers which has MLME in firmware and does not have support |
| 1997 |
* to report per station tx/rx activity to free up the station entry from |
| 1998 |
* the list. This needs to be used when the driver advertises the |
| 1999 |
* capability to timeout the stations. |
| 2000 |
* |
| 2001 |
* @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); |
| 2002 |
* this attribute is (depending on the driver capabilities) added to |
| 2003 |
* received frames indicated with %NL80211_CMD_FRAME. |
| 2004 |
* |
| 2005 |
* @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds |
| 2006 |
* or 0 to disable background scan. |
| 2007 |
* |
| 2008 |
* @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from |
| 2009 |
* userspace. If unset it is assumed the hint comes directly from |
| 2010 |
* a user. If set code could specify exactly what type of source |
| 2011 |
* was used to provide the hint. For the different types of |
| 2012 |
* allowed user regulatory hints see nl80211_user_reg_hint_type. |
| 2013 |
* |
| 2014 |
* @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected |
| 2015 |
* the connection request from a station. nl80211_connect_failed_reason |
| 2016 |
* enum has different reasons of connection failure. |
| 2017 |
* |
| 2018 |
* @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. |
| 2019 |
* This contains the authentication frame body (non-IE and IE data), |
| 2020 |
* excluding the Authentication algorithm number, i.e., starting at the |
| 2021 |
* Authentication transaction sequence number field. It is used with |
| 2022 |
* authentication algorithms that need special fields to be added into |
| 2023 |
* the frames (SAE and FILS). Currently, only the SAE cases use the |
| 2024 |
* initial two fields (Authentication transaction sequence number and |
| 2025 |
* Status code). However, those fields are included in the attribute data |
| 2026 |
* for all authentication algorithms to keep the attribute definition |
| 2027 |
* consistent. |
| 2028 |
* |
| 2029 |
* @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from |
| 2030 |
* association request when used with NL80211_CMD_NEW_STATION) |
| 2031 |
* |
| 2032 |
* @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) |
| 2033 |
* |
| 2034 |
* @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with |
| 2035 |
* the START_AP and SET_BSS commands |
| 2036 |
* @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the |
| 2037 |
* START_AP and SET_BSS commands. This can have the values 0 or 1; |
| 2038 |
* if not given in START_AP 0 is assumed, if not given in SET_BSS |
| 2039 |
* no change is made. |
| 2040 |
* |
| 2041 |
* @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode |
| 2042 |
* defined in &enum nl80211_mesh_power_mode. |
| 2043 |
* |
| 2044 |
* @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, |
| 2045 |
* carried in a u32 attribute |
| 2046 |
* |
| 2047 |
* @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for |
| 2048 |
* MAC ACL. |
| 2049 |
* |
| 2050 |
* @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum |
| 2051 |
* number of MAC addresses that a device can support for MAC |
| 2052 |
* ACL. |
| 2053 |
* |
| 2054 |
* @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, |
| 2055 |
* contains a value of enum nl80211_radar_event (u32). |
| 2056 |
* |
| 2057 |
* @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver |
| 2058 |
* has and handles. The format is the same as the IE contents. See |
| 2059 |
* 802.11-2012 8.4.2.29 for more information. |
| 2060 |
* @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver |
| 2061 |
* has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. |
| 2062 |
* |
| 2063 |
* @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to |
| 2064 |
* the driver, e.g., to enable TDLS power save (PU-APSD). |
| 2065 |
* |
| 2066 |
* @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are |
| 2067 |
* advertised to the driver, e.g., to enable TDLS off channel operations |
| 2068 |
* and PU-APSD. |
| 2069 |
* |
| 2070 |
* @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see |
| 2071 |
* &enum nl80211_protocol_features, the attribute is a u32. |
| 2072 |
* |
| 2073 |
* @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports |
| 2074 |
* receiving the data for a single wiphy split across multiple |
| 2075 |
* messages, given with wiphy dump message |
| 2076 |
* |
| 2077 |
* @NL80211_ATTR_MDID: Mobility Domain Identifier |
| 2078 |
* |
| 2079 |
* @NL80211_ATTR_IE_RIC: Resource Information Container Information |
| 2080 |
* Element |
| 2081 |
* |
| 2082 |
* @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased |
| 2083 |
* reliability, see &enum nl80211_crit_proto_id (u16). |
| 2084 |
* @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which |
| 2085 |
* the connection should have increased reliability (u16). |
| 2086 |
* |
| 2087 |
* @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). |
| 2088 |
* This is similar to @NL80211_ATTR_STA_AID but with a difference of being |
| 2089 |
* allowed to be used with the first @NL80211_CMD_SET_STATION command to |
| 2090 |
* update a TDLS peer STA entry. |
| 2091 |
* |
| 2092 |
* @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. |
| 2093 |
* |
| 2094 |
* @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's |
| 2095 |
* until the channel switch event. |
| 2096 |
* @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission |
| 2097 |
* must be blocked on the current channel (before the channel switch |
| 2098 |
* operation). Also included in the channel switch started event if quiet |
| 2099 |
* was requested by the AP. |
| 2100 |
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information |
| 2101 |
* for the time while performing a channel switch. |
| 2102 |
* @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel |
| 2103 |
* switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). |
| 2104 |
* @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel |
| 2105 |
* switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). |
| 2106 |
* |
| 2107 |
* @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. |
| 2108 |
* As specified in the &enum nl80211_rxmgmt_flags. |
| 2109 |
* |
| 2110 |
* @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. |
| 2111 |
* |
| 2112 |
* @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported |
| 2113 |
* operating classes. |
| 2114 |
* |
| 2115 |
* @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space |
| 2116 |
* controls DFS operation in IBSS mode. If the flag is included in |
| 2117 |
* %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS |
| 2118 |
* channels and reports radar events to userspace. Userspace is required |
| 2119 |
* to react to radar events, e.g. initiate a channel switch or leave the |
| 2120 |
* IBSS network. |
| 2121 |
* |
| 2122 |
* @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports |
| 2123 |
* 5 MHz channel bandwidth. |
| 2124 |
* @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports |
| 2125 |
* 10 MHz channel bandwidth. |
| 2126 |
* |
| 2127 |
* @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode |
| 2128 |
* Notification Element based on association request when used with |
| 2129 |
* %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when |
| 2130 |
* %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); |
| 2131 |
* u8 attribute. |
| 2132 |
* |
| 2133 |
* @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if |
| 2134 |
* %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) |
| 2135 |
* @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command |
| 2136 |
* @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this |
| 2137 |
* attribute is also used for vendor command feature advertisement |
| 2138 |
* @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy |
| 2139 |
* info, containing a nested array of possible events |
| 2140 |
* |
| 2141 |
* @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This |
| 2142 |
* data is in the format defined for the payload of the QoS Map Set element |
| 2143 |
* in IEEE Std 802.11-2012, 8.4.2.97. |
| 2144 |
* |
| 2145 |
* @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS |
| 2146 |
* @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS |
| 2147 |
* |
| 2148 |
* @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many |
| 2149 |
* associated stations are supported in AP mode (including P2P GO); u32. |
| 2150 |
* Since drivers may not have a fixed limit on the maximum number (e.g., |
| 2151 |
* other concurrent operations may affect this), drivers are allowed to |
| 2152 |
* advertise values that cannot always be met. In such cases, an attempt |
| 2153 |
* to add a new station entry with @NL80211_CMD_NEW_STATION may fail. |
| 2154 |
* |
| 2155 |
* @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which |
| 2156 |
* should be updated when the frame is transmitted. |
| 2157 |
* @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum |
| 2158 |
* supported number of csa counters. |
| 2159 |
* |
| 2160 |
* @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. |
| 2161 |
* As specified in the &enum nl80211_tdls_peer_capability. |
| 2162 |
* |
| 2163 |
* @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface |
| 2164 |
* creation then the new interface will be owned by the netlink socket |
| 2165 |
* that created it and will be destroyed when the socket is closed. |
| 2166 |
* If set during scheduled scan start then the new scan req will be |
| 2167 |
* owned by the netlink socket that created it and the scheduled scan will |
| 2168 |
* be stopped when the socket is closed. |
| 2169 |
* If set during configuration of regulatory indoor operation then the |
| 2170 |
* regulatory indoor configuration would be owned by the netlink socket |
| 2171 |
* that configured the indoor setting, and the indoor operation would be |
| 2172 |
* cleared when the socket is closed. |
| 2173 |
* If set during NAN interface creation, the interface will be destroyed |
| 2174 |
* if the socket is closed just like any other interface. Moreover, NAN |
| 2175 |
* notifications will be sent in unicast to that socket. Without this |
| 2176 |
* attribute, the notifications will be sent to the %NL80211_MCGRP_NAN |
| 2177 |
* multicast group. |
| 2178 |
* If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the |
| 2179 |
* station will deauthenticate when the socket is closed. |
| 2180 |
* If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically |
| 2181 |
* torn down when the socket is closed. |
| 2182 |
* If set during %NL80211_CMD_JOIN_MESH the mesh setup will be |
| 2183 |
* automatically torn down when the socket is closed. |
| 2184 |
* If set during %NL80211_CMD_START_AP the AP will be automatically |
| 2185 |
* disabled when the socket is closed. |
| 2186 |
* |
| 2187 |
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is |
| 2188 |
* the TDLS link initiator. |
| 2189 |
* |
| 2190 |
* @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection |
| 2191 |
* shall support Radio Resource Measurements (11k). This attribute can be |
| 2192 |
* used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. |
| 2193 |
* User space applications are expected to use this flag only if the |
| 2194 |
* underlying device supports these minimal RRM features: |
| 2195 |
* %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, |
| 2196 |
* %NL80211_FEATURE_QUIET, |
| 2197 |
* Or, if global RRM is supported, see: |
| 2198 |
* %NL80211_EXT_FEATURE_RRM |
| 2199 |
* If this flag is used, driver must add the Power Capabilities IE to the |
| 2200 |
* association request. In addition, it must also set the RRM capability |
| 2201 |
* flag in the association request's Capability Info field. |
| 2202 |
* |
| 2203 |
* @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout |
| 2204 |
* estimation algorithm (dynack). In order to activate dynack |
| 2205 |
* %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower |
| 2206 |
* drivers to indicate dynack capability. Dynack is automatically disabled |
| 2207 |
* setting valid value for coverage class. |
| 2208 |
* |
| 2209 |
* @NL80211_ATTR_TSID: a TSID value (u8 attribute) |
| 2210 |
* @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) |
| 2211 |
* @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds |
| 2212 |
* (per second) (u16 attribute) |
| 2213 |
* |
| 2214 |
* @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see |
| 2215 |
* &enum nl80211_smps_mode. |
| 2216 |
* |
| 2217 |
* @NL80211_ATTR_OPER_CLASS: operating class |
| 2218 |
* |
| 2219 |
* @NL80211_ATTR_MAC_MASK: MAC address mask |
| 2220 |
* |
| 2221 |
* @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device |
| 2222 |
* is self-managing its regulatory information and any regulatory domain |
| 2223 |
* obtained from it is coming from the device's wiphy and not the global |
| 2224 |
* cfg80211 regdomain. |
| 2225 |
* |
| 2226 |
* @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte |
| 2227 |
* array. The feature flags are identified by their bit index (see &enum |
| 2228 |
* nl80211_ext_feature_index). The bit index is ordered starting at the |
| 2229 |
* least-significant bit of the first byte in the array, ie. bit index 0 |
| 2230 |
* is located at bit 0 of byte 0. bit index 25 would be located at bit 1 |
| 2231 |
* of byte 3 (u8 array). |
| 2232 |
* |
| 2233 |
* @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be |
| 2234 |
* returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY |
| 2235 |
* may return a survey entry without a channel indicating global radio |
| 2236 |
* statistics (only some values are valid and make sense.) |
| 2237 |
* For devices that don't return such an entry even then, the information |
| 2238 |
* should be contained in the result as the sum of the respective counters |
| 2239 |
* over all channels. |
| 2240 |
* |
| 2241 |
* @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a |
| 2242 |
* scheduled scan is started. Or the delay before a WoWLAN |
| 2243 |
* net-detect scan is started, counting from the moment the |
| 2244 |
* system is suspended. This value is a u32, in seconds. |
| 2245 |
|
| 2246 |
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device |
| 2247 |
* is operating in an indoor environment. |
| 2248 |
* |
| 2249 |
* @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for |
| 2250 |
* scheduled scan supported by the device (u32), a wiphy attribute. |
| 2251 |
* @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for |
| 2252 |
* a scan plan (u32), a wiphy attribute. |
| 2253 |
* @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in |
| 2254 |
* a scan plan (u32), a wiphy attribute. |
| 2255 |
* @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. |
| 2256 |
* Each scan plan defines the number of scan iterations and the interval |
| 2257 |
* between scans. The last scan plan will always run infinitely, |
| 2258 |
* thus it must not specify the number of iterations, only the interval |
| 2259 |
* between scans. The scan plans are executed sequentially. |
| 2260 |
* Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. |
| 2261 |
* @NL80211_ATTR_PBSS: flag attribute. If set it means operate |
| 2262 |
* in a PBSS. Specified in %NL80211_CMD_CONNECT to request |
| 2263 |
* connecting to a PCP, and in %NL80211_CMD_START_AP to start |
| 2264 |
* a PCP instead of AP. Relevant for DMG networks only. |
| 2265 |
* @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the |
| 2266 |
* BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains |
| 2267 |
* attributes according &enum nl80211_bss_select_attr to indicate what |
| 2268 |
* BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT |
| 2269 |
* it contains the behaviour-specific attribute containing the parameters for |
| 2270 |
* BSS selection to be done by driver and/or firmware. |
| 2271 |
* |
| 2272 |
* @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported |
| 2273 |
* or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status |
| 2274 |
* |
| 2275 |
* @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment |
| 2276 |
* |
| 2277 |
* @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: |
| 2278 |
* %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, |
| 2279 |
* %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per |
| 2280 |
* interface type. |
| 2281 |
* |
| 2282 |
* @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO |
| 2283 |
* groupID for monitor mode. |
| 2284 |
* The first 8 bytes are a mask that defines the membership in each |
| 2285 |
* group (there are 64 groups, group 0 and 63 are reserved), |
| 2286 |
* each bit represents a group and set to 1 for being a member in |
| 2287 |
* that group and 0 for not being a member. |
| 2288 |
* The remaining 16 bytes define the position in each group: 2 bits for |
| 2289 |
* each group. |
| 2290 |
* (smaller group numbers represented on most significant bits and bigger |
| 2291 |
* group numbers on least significant bits.) |
| 2292 |
* This attribute is used only if all interfaces are in monitor mode. |
| 2293 |
* Set this attribute in order to monitor packets using the given MU-MIMO |
| 2294 |
* groupID data. |
| 2295 |
* to turn off that feature set all the bits of the groupID to zero. |
| 2296 |
* @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow |
| 2297 |
* when using MU-MIMO air sniffer. |
| 2298 |
* to turn that feature off set an invalid mac address |
| 2299 |
* (e.g. FF:FF:FF:FF:FF:FF) |
| 2300 |
* |
| 2301 |
* @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually |
| 2302 |
* started (u64). The time is the TSF of the BSS the interface that |
| 2303 |
* requested the scan is connected to (if available, otherwise this |
| 2304 |
* attribute must not be included). |
| 2305 |
* @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which |
| 2306 |
* %NL80211_ATTR_SCAN_START_TIME_TSF is set. |
| 2307 |
* @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If |
| 2308 |
* %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the |
| 2309 |
* maximum measurement duration allowed. This attribute is used with |
| 2310 |
* measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN |
| 2311 |
* if the scan is used for beacon report radio measurement. |
| 2312 |
* @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates |
| 2313 |
* that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is |
| 2314 |
* mandatory. If this flag is not set, the duration is the maximum duration |
| 2315 |
* and the actual measurement duration may be shorter. |
| 2316 |
* |
| 2317 |
* @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is |
| 2318 |
* used to pull the stored data for mesh peer in power save state. |
| 2319 |
* |
| 2320 |
* @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by |
| 2321 |
* %NL80211_CMD_START_NAN and optionally with |
| 2322 |
* %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. |
| 2323 |
* Also, values 1 and 255 are reserved for certification purposes and |
| 2324 |
* should not be used during a normal device operation. |
| 2325 |
* @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 |
| 2326 |
* bitmask of BIT(NL80211_BAND_*) as described in %enum |
| 2327 |
* nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 |
| 2328 |
* would be set. This attribute is used with |
| 2329 |
* %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and |
| 2330 |
* it is optional. If no bands are set, it means don't-care and |
| 2331 |
* the device will decide what to use. |
| 2332 |
* @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See |
| 2333 |
* &enum nl80211_nan_func_attributes for description of this nested |
| 2334 |
* attribute. |
| 2335 |
* @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. |
| 2336 |
* See &enum nl80211_nan_match_attributes. |
| 2337 |
* @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame |
| 2338 |
* protection. |
| 2339 |
* @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association |
| 2340 |
* Request/Response frame protection. This attribute contains the 16 octet |
| 2341 |
* STA Nonce followed by 16 octets of AP Nonce. |
| 2342 |
* |
| 2343 |
* @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast |
| 2344 |
* packets should be send out as unicast to all stations (flag attribute). |
| 2345 |
* |
| 2346 |
* @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also |
| 2347 |
* used in various commands/events for specifying the BSSID. |
| 2348 |
* |
| 2349 |
* @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which |
| 2350 |
* other BSSs has to be better or slightly worse than the current |
| 2351 |
* connected BSS so that they get reported to user space. |
| 2352 |
* This will give an opportunity to userspace to consider connecting to |
| 2353 |
* other matching BSSs which have better or slightly worse RSSI than |
| 2354 |
* the current connected BSS by using an offloaded operation to avoid |
| 2355 |
* unnecessary wakeups. |
| 2356 |
* |
| 2357 |
* @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in |
| 2358 |
* the specified band is to be adjusted before doing |
| 2359 |
* %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out |
| 2360 |
* better BSSs. The attribute value is a packed structure |
| 2361 |
* value as specified by &struct nl80211_bss_select_rssi_adjust. |
| 2362 |
* |
| 2363 |
* @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. |
| 2364 |
* u32 attribute with an &enum nl80211_timeout_reason value. This is used, |
| 2365 |
* e.g., with %NL80211_CMD_CONNECT event. |
| 2366 |
* |
| 2367 |
* @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) |
| 2368 |
* username part of NAI used to refer keys rRK and rIK. This is used with |
| 2369 |
* %NL80211_CMD_CONNECT. |
| 2370 |
* |
| 2371 |
* @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part |
| 2372 |
* of NAI specifying the domain name of the ER server. This is used with |
| 2373 |
* %NL80211_CMD_CONNECT. |
| 2374 |
* |
| 2375 |
* @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number |
| 2376 |
* to use in ERP messages. This is used in generating the FILS wrapped data |
| 2377 |
* for FILS authentication and is used with %NL80211_CMD_CONNECT. |
| 2378 |
* |
| 2379 |
* @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the |
| 2380 |
* NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and |
| 2381 |
* %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK |
| 2382 |
* from successful FILS authentication and is used with |
| 2383 |
* %NL80211_CMD_CONNECT. |
| 2384 |
* |
| 2385 |
* @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP |
| 2386 |
* identifying the scope of PMKSAs. This is used with |
| 2387 |
* @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. |
| 2388 |
* |
| 2389 |
* @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with |
| 2390 |
* %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. |
| 2391 |
* For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide |
| 2392 |
* PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X |
| 2393 |
* authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT |
| 2394 |
* support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME |
| 2395 |
* is included as well. |
| 2396 |
* |
| 2397 |
* @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to |
| 2398 |
* indicate that it supports multiple active scheduled scan requests. |
| 2399 |
* @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled |
| 2400 |
* scan request that may be active for the device (u32). |
| 2401 |
* |
| 2402 |
* @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include |
| 2403 |
* in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it |
| 2404 |
* wants to use the supported offload of the 4-way handshake. |
| 2405 |
* @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. |
| 2406 |
* @NL80211_ATTR_PORT_AUTHORIZED: (reserved) |
| 2407 |
* |
| 2408 |
* @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external |
| 2409 |
* authentication operation (u32 attribute with an |
| 2410 |
* &enum nl80211_external_auth_action value). This is used with the |
| 2411 |
* %NL80211_CMD_EXTERNAL_AUTH request event. |
| 2412 |
* @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user |
| 2413 |
* space supports external authentication. This attribute shall be used |
| 2414 |
* with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver |
| 2415 |
* may offload authentication processing to user space if this capability |
| 2416 |
* is indicated in the respective requests from the user space. |
| 2417 |
* |
| 2418 |
* @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this |
| 2419 |
* u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. |
| 2420 |
* |
| 2421 |
* @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum |
| 2422 |
* nl80211_txq_stats) |
| 2423 |
* @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. |
| 2424 |
* The smaller of this and the memory limit is enforced. |
| 2425 |
* @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the |
| 2426 |
* TXQ queues for this phy. The smaller of this and the packet limit is |
| 2427 |
* enforced. |
| 2428 |
* @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes |
| 2429 |
* a flow is assigned on each round of the DRR scheduler. |
| 2430 |
* @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from |
| 2431 |
* association request when used with NL80211_CMD_NEW_STATION). Can be set |
| 2432 |
* only if %NL80211_STA_FLAG_WME is set. |
| 2433 |
* |
| 2434 |
* @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include |
| 2435 |
* in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing |
| 2436 |
* measurement (FTM) responder functionality and containing parameters as |
| 2437 |
* possible, see &enum nl80211_ftm_responder_attr |
| 2438 |
* |
| 2439 |
* @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder |
| 2440 |
* statistics, see &enum nl80211_ftm_responder_stats. |
| 2441 |
* |
| 2442 |
* @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), |
| 2443 |
* if the attribute is not given no timeout is requested. Note that 0 is an |
| 2444 |
* invalid value. |
| 2445 |
* |
| 2446 |
* @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) |
| 2447 |
* data, uses nested attributes specified in |
| 2448 |
* &enum nl80211_peer_measurement_attrs. |
| 2449 |
* This is also used for capability advertisement in the wiphy information, |
| 2450 |
* with the appropriate sub-attributes. |
| 2451 |
* |
| 2452 |
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime |
| 2453 |
* scheduler. |
| 2454 |
* |
| 2455 |
* @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for |
| 2456 |
* station associated with the AP. See &enum nl80211_tx_power_setting for |
| 2457 |
* possible values. |
| 2458 |
* @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This |
| 2459 |
* allows to set Tx power for a station. If this attribute is not included, |
| 2460 |
* the default per-interface tx power setting will be overriding. Driver |
| 2461 |
* should be picking up the lowest tx power, either tx power per-interface |
| 2462 |
* or per-station. |
| 2463 |
* |
| 2464 |
* @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It |
| 2465 |
* is used with %NL80211_CMD_CONNECT to provide password for offloading |
| 2466 |
* SAE authentication for WPA3-Personal networks. |
| 2467 |
* |
| 2468 |
* @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. |
| 2469 |
* |
| 2470 |
* @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection |
| 2471 |
* functionality. |
| 2472 |
* |
| 2473 |
* @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz |
| 2474 |
* channel(s) that are allowed to be used for EDMG transmissions. |
| 2475 |
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) |
| 2476 |
* @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes |
| 2477 |
* the allowed channel bandwidth configurations. (u8 attribute) |
| 2478 |
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. |
| 2479 |
* |
| 2480 |
* @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key |
| 2481 |
* (u16). |
| 2482 |
* |
| 2483 |
* @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. |
| 2484 |
* |
| 2485 |
* @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry |
| 2486 |
* using attributes from &enum nl80211_iftype_akm_attributes. This |
| 2487 |
* attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating |
| 2488 |
* supported AKM suites capability per interface. AKMs advertised in |
| 2489 |
* %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not |
| 2490 |
* advertised for a specific interface type. |
| 2491 |
* |
| 2492 |
* @NL80211_ATTR_TID_CONFIG: TID specific configuration in a |
| 2493 |
* nested attribute with &enum nl80211_tid_config_attr sub-attributes; |
| 2494 |
* on output (in wiphy attributes) it contains only the feature sub- |
| 2495 |
* attributes. |
| 2496 |
* |
| 2497 |
* @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control |
| 2498 |
* port in order to forward/receive them as ordinary data frames. |
| 2499 |
* |
| 2500 |
* @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, |
| 2501 |
* dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). |
| 2502 |
* An optional parameter configured through %NL80211_CMD_SET_PMKSA. |
| 2503 |
* Drivers that trigger roaming need to know the lifetime of the |
| 2504 |
* configured PMKSA for triggering the full vs. PMKSA caching based |
| 2505 |
* authentication. This timeout helps authentication methods like SAE, |
| 2506 |
* where PMK gets updated only by going through a full (new SAE) |
| 2507 |
* authentication instead of getting updated during an association for EAP |
| 2508 |
* authentication. No new full authentication within the PMK expiry shall |
| 2509 |
* result in a disassociation at the end of the lifetime. |
| 2510 |
* |
| 2511 |
* @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in |
| 2512 |
* terms of percentage of %NL80211_ATTR_PMK_LIFETIME |
| 2513 |
* (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional |
| 2514 |
* parameter configured through %NL80211_CMD_SET_PMKSA. Requests the |
| 2515 |
* driver to trigger a full authentication roam (without PMKSA caching) |
| 2516 |
* after the reauthentication threshold time, but before the PMK lifetime |
| 2517 |
* has expired. |
| 2518 |
* |
| 2519 |
* Authentication methods like SAE need to be able to generate a new PMKSA |
| 2520 |
* entry without having to force a disconnection after the PMK timeout. If |
| 2521 |
* no roaming occurs between the reauth threshold and PMK expiration, |
| 2522 |
* disassociation is still forced. |
| 2523 |
* @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the |
| 2524 |
* %NL80211_CMD_REGISTER_FRAME command, see the description there. |
| 2525 |
* @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated |
| 2526 |
* %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with |
| 2527 |
* an %NL80211_ATTR_WIPHY_FREQ_OFFSET. |
| 2528 |
* @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the |
| 2529 |
* first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. |
| 2530 |
* @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies |
| 2531 |
* |
| 2532 |
* @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from |
| 2533 |
* association request when used with NL80211_CMD_NEW_STATION). |
| 2534 |
* |
| 2535 |
* @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS |
| 2536 |
* discovery. It is a nested attribute, see |
| 2537 |
* &enum nl80211_fils_discovery_attributes. |
| 2538 |
* |
| 2539 |
* @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure |
| 2540 |
* unsolicited broadcast probe response. It is a nested attribute, see |
| 2541 |
* &enum nl80211_unsol_bcast_probe_resp_attributes. |
| 2542 |
* |
| 2543 |
* @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from |
| 2544 |
* association request when used with NL80211_CMD_NEW_STATION) |
| 2545 |
* @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element |
| 2546 |
* override mask. Used with NL80211_ATTR_S1G_CAPABILITY in |
| 2547 |
* NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. |
| 2548 |
* |
| 2549 |
* @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE |
| 2550 |
* derivation in WPA3-Personal networks which are using SAE authentication. |
| 2551 |
* This is a u8 attribute that encapsulates one of the values from |
| 2552 |
* &enum nl80211_sae_pwe_mechanism. |
| 2553 |
* |
| 2554 |
* @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when |
| 2555 |
* used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields |
| 2556 |
* of %nl80211_sar_attrs which specifies the sar type and related |
| 2557 |
* sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. |
| 2558 |
* |
| 2559 |
* @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and |
| 2560 |
* disassoc events to indicate that an immediate reconnect to the AP |
| 2561 |
* is desired. |
| 2562 |
* |
| 2563 |
* @NUM_NL80211_ATTR: total number of nl80211_attrs available |
| 2564 |
* @NL80211_ATTR_MAX: highest attribute number currently defined |
| 2565 |
* @__NL80211_ATTR_AFTER_LAST: internal use |
| 2566 |
*/ |
| 2567 |
enum nl80211_attrs { |
| 2568 |
/* don't change the order or add anything between, this is ABI! */ |
| 2569 |
NL80211_ATTR_UNSPEC, |
| 2570 |
|
| 2571 |
NL80211_ATTR_WIPHY, |
| 2572 |
NL80211_ATTR_WIPHY_NAME, |
| 2573 |
|
| 2574 |
NL80211_ATTR_IFINDEX, |
| 2575 |
NL80211_ATTR_IFNAME, |
| 2576 |
NL80211_ATTR_IFTYPE, |
| 2577 |
|
| 2578 |
NL80211_ATTR_MAC, |
| 2579 |
|
| 2580 |
NL80211_ATTR_KEY_DATA, |
| 2581 |
NL80211_ATTR_KEY_IDX, |
| 2582 |
NL80211_ATTR_KEY_CIPHER, |
| 2583 |
NL80211_ATTR_KEY_SEQ, |
| 2584 |
NL80211_ATTR_KEY_DEFAULT, |
| 2585 |
|
| 2586 |
NL80211_ATTR_BEACON_INTERVAL, |
| 2587 |
NL80211_ATTR_DTIM_PERIOD, |
| 2588 |
NL80211_ATTR_BEACON_HEAD, |
| 2589 |
NL80211_ATTR_BEACON_TAIL, |
| 2590 |
|
| 2591 |
NL80211_ATTR_STA_AID, |
| 2592 |
NL80211_ATTR_STA_FLAGS, |
| 2593 |
NL80211_ATTR_STA_LISTEN_INTERVAL, |
| 2594 |
NL80211_ATTR_STA_SUPPORTED_RATES, |
| 2595 |
NL80211_ATTR_STA_VLAN, |
| 2596 |
NL80211_ATTR_STA_INFO, |
| 2597 |
|
| 2598 |
NL80211_ATTR_WIPHY_BANDS, |
| 2599 |
|
| 2600 |
NL80211_ATTR_MNTR_FLAGS, |
| 2601 |
|
| 2602 |
NL80211_ATTR_MESH_ID, |
| 2603 |
NL80211_ATTR_STA_PLINK_ACTION, |
| 2604 |
NL80211_ATTR_MPATH_NEXT_HOP, |
| 2605 |
NL80211_ATTR_MPATH_INFO, |
| 2606 |
|
| 2607 |
NL80211_ATTR_BSS_CTS_PROT, |
| 2608 |
NL80211_ATTR_BSS_SHORT_PREAMBLE, |
| 2609 |
NL80211_ATTR_BSS_SHORT_SLOT_TIME, |
| 2610 |
|
| 2611 |
NL80211_ATTR_HT_CAPABILITY, |
| 2612 |
|
| 2613 |
NL80211_ATTR_SUPPORTED_IFTYPES, |
| 2614 |
|
| 2615 |
NL80211_ATTR_REG_ALPHA2, |
| 2616 |
NL80211_ATTR_REG_RULES, |
| 2617 |
|
| 2618 |
NL80211_ATTR_MESH_CONFIG, |
| 2619 |
|
| 2620 |
NL80211_ATTR_BSS_BASIC_RATES, |
| 2621 |
|
| 2622 |
NL80211_ATTR_WIPHY_TXQ_PARAMS, |
| 2623 |
NL80211_ATTR_WIPHY_FREQ, |
| 2624 |
NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
| 2625 |
|
| 2626 |
NL80211_ATTR_KEY_DEFAULT_MGMT, |
| 2627 |
|
| 2628 |
NL80211_ATTR_MGMT_SUBTYPE, |
| 2629 |
NL80211_ATTR_IE, |
| 2630 |
|
| 2631 |
NL80211_ATTR_MAX_NUM_SCAN_SSIDS, |
| 2632 |
|
| 2633 |
NL80211_ATTR_SCAN_FREQUENCIES, |
| 2634 |
NL80211_ATTR_SCAN_SSIDS, |
| 2635 |
NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ |
| 2636 |
NL80211_ATTR_BSS, |
| 2637 |
|
| 2638 |
NL80211_ATTR_REG_INITIATOR, |
| 2639 |
NL80211_ATTR_REG_TYPE, |
| 2640 |
|
| 2641 |
NL80211_ATTR_SUPPORTED_COMMANDS, |
| 2642 |
|
| 2643 |
NL80211_ATTR_FRAME, |
| 2644 |
NL80211_ATTR_SSID, |
| 2645 |
NL80211_ATTR_AUTH_TYPE, |
| 2646 |
NL80211_ATTR_REASON_CODE, |
| 2647 |
|
| 2648 |
NL80211_ATTR_KEY_TYPE, |
| 2649 |
|
| 2650 |
NL80211_ATTR_MAX_SCAN_IE_LEN, |
| 2651 |
NL80211_ATTR_CIPHER_SUITES, |
| 2652 |
|
| 2653 |
NL80211_ATTR_FREQ_BEFORE, |
| 2654 |
NL80211_ATTR_FREQ_AFTER, |
| 2655 |
|
| 2656 |
NL80211_ATTR_FREQ_FIXED, |
| 2657 |
|
| 2658 |
|
| 2659 |
NL80211_ATTR_WIPHY_RETRY_SHORT, |
| 2660 |
NL80211_ATTR_WIPHY_RETRY_LONG, |
| 2661 |
NL80211_ATTR_WIPHY_FRAG_THRESHOLD, |
| 2662 |
NL80211_ATTR_WIPHY_RTS_THRESHOLD, |
| 2663 |
|
| 2664 |
NL80211_ATTR_TIMED_OUT, |
| 2665 |
|
| 2666 |
NL80211_ATTR_USE_MFP, |
| 2667 |
|
| 2668 |
NL80211_ATTR_STA_FLAGS2, |
| 2669 |
|
| 2670 |
NL80211_ATTR_CONTROL_PORT, |
| 2671 |
|
| 2672 |
NL80211_ATTR_TESTDATA, |
| 2673 |
|
| 2674 |
NL80211_ATTR_PRIVACY, |
| 2675 |
|
| 2676 |
NL80211_ATTR_DISCONNECTED_BY_AP, |
| 2677 |
NL80211_ATTR_STATUS_CODE, |
| 2678 |
|
| 2679 |
NL80211_ATTR_CIPHER_SUITES_PAIRWISE, |
| 2680 |
NL80211_ATTR_CIPHER_SUITE_GROUP, |
| 2681 |
NL80211_ATTR_WPA_VERSIONS, |
| 2682 |
NL80211_ATTR_AKM_SUITES, |
| 2683 |
|
| 2684 |
NL80211_ATTR_REQ_IE, |
| 2685 |
NL80211_ATTR_RESP_IE, |
| 2686 |
|
| 2687 |
NL80211_ATTR_PREV_BSSID, |
| 2688 |
|
| 2689 |
NL80211_ATTR_KEY, |
| 2690 |
NL80211_ATTR_KEYS, |
| 2691 |
|
| 2692 |
NL80211_ATTR_PID, |
| 2693 |
|
| 2694 |
NL80211_ATTR_4ADDR, |
| 2695 |
|
| 2696 |
NL80211_ATTR_SURVEY_INFO, |
| 2697 |
|
| 2698 |
NL80211_ATTR_PMKID, |
| 2699 |
NL80211_ATTR_MAX_NUM_PMKIDS, |
| 2700 |
|
| 2701 |
NL80211_ATTR_DURATION, |
| 2702 |
|
| 2703 |
NL80211_ATTR_COOKIE, |
| 2704 |
|
| 2705 |
NL80211_ATTR_WIPHY_COVERAGE_CLASS, |
| 2706 |
|
| 2707 |
NL80211_ATTR_TX_RATES, |
| 2708 |
|
| 2709 |
NL80211_ATTR_FRAME_MATCH, |
| 2710 |
|
| 2711 |
NL80211_ATTR_ACK, |
| 2712 |
|
| 2713 |
NL80211_ATTR_PS_STATE, |
| 2714 |
|
| 2715 |
NL80211_ATTR_CQM, |
| 2716 |
|
| 2717 |
NL80211_ATTR_LOCAL_STATE_CHANGE, |
| 2718 |
|
| 2719 |
NL80211_ATTR_AP_ISOLATE, |
| 2720 |
|
| 2721 |
NL80211_ATTR_WIPHY_TX_POWER_SETTING, |
| 2722 |
NL80211_ATTR_WIPHY_TX_POWER_LEVEL, |
| 2723 |
|
| 2724 |
NL80211_ATTR_TX_FRAME_TYPES, |
| 2725 |
NL80211_ATTR_RX_FRAME_TYPES, |
| 2726 |
NL80211_ATTR_FRAME_TYPE, |
| 2727 |
|
| 2728 |
NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
| 2729 |
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, |
| 2730 |
|
| 2731 |
NL80211_ATTR_SUPPORT_IBSS_RSN, |
| 2732 |
|
| 2733 |
NL80211_ATTR_WIPHY_ANTENNA_TX, |
| 2734 |
NL80211_ATTR_WIPHY_ANTENNA_RX, |
| 2735 |
|
| 2736 |
NL80211_ATTR_MCAST_RATE, |
| 2737 |
|
| 2738 |
NL80211_ATTR_OFFCHANNEL_TX_OK, |
| 2739 |
|
| 2740 |
NL80211_ATTR_BSS_HT_OPMODE, |
| 2741 |
|
| 2742 |
NL80211_ATTR_KEY_DEFAULT_TYPES, |
| 2743 |
|
| 2744 |
NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, |
| 2745 |
|
| 2746 |
NL80211_ATTR_MESH_SETUP, |
| 2747 |
|
| 2748 |
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, |
| 2749 |
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, |
| 2750 |
|
| 2751 |
NL80211_ATTR_SUPPORT_MESH_AUTH, |
| 2752 |
NL80211_ATTR_STA_PLINK_STATE, |
| 2753 |
|
| 2754 |
NL80211_ATTR_WOWLAN_TRIGGERS, |
| 2755 |
NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, |
| 2756 |
|
| 2757 |
NL80211_ATTR_SCHED_SCAN_INTERVAL, |
| 2758 |
|
| 2759 |
NL80211_ATTR_INTERFACE_COMBINATIONS, |
| 2760 |
NL80211_ATTR_SOFTWARE_IFTYPES, |
| 2761 |
|
| 2762 |
NL80211_ATTR_REKEY_DATA, |
| 2763 |
|
| 2764 |
NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, |
| 2765 |
NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, |
| 2766 |
|
| 2767 |
NL80211_ATTR_SCAN_SUPP_RATES, |
| 2768 |
|
| 2769 |
NL80211_ATTR_HIDDEN_SSID, |
| 2770 |
|
| 2771 |
NL80211_ATTR_IE_PROBE_RESP, |
| 2772 |
NL80211_ATTR_IE_ASSOC_RESP, |
| 2773 |
|
| 2774 |
NL80211_ATTR_STA_WME, |
| 2775 |
NL80211_ATTR_SUPPORT_AP_UAPSD, |
| 2776 |
|
| 2777 |
NL80211_ATTR_ROAM_SUPPORT, |
| 2778 |
|
| 2779 |
NL80211_ATTR_SCHED_SCAN_MATCH, |
| 2780 |
NL80211_ATTR_MAX_MATCH_SETS, |
| 2781 |
|
| 2782 |
NL80211_ATTR_PMKSA_CANDIDATE, |
| 2783 |
|
| 2784 |
NL80211_ATTR_TX_NO_CCK_RATE, |
| 2785 |
|
| 2786 |
NL80211_ATTR_TDLS_ACTION, |
| 2787 |
NL80211_ATTR_TDLS_DIALOG_TOKEN, |
| 2788 |
NL80211_ATTR_TDLS_OPERATION, |
| 2789 |
NL80211_ATTR_TDLS_SUPPORT, |
| 2790 |
NL80211_ATTR_TDLS_EXTERNAL_SETUP, |
| 2791 |
|
| 2792 |
NL80211_ATTR_DEVICE_AP_SME, |
| 2793 |
|
| 2794 |
NL80211_ATTR_DONT_WAIT_FOR_ACK, |
| 2795 |
|
| 2796 |
NL80211_ATTR_FEATURE_FLAGS, |
| 2797 |
|
| 2798 |
NL80211_ATTR_PROBE_RESP_OFFLOAD, |
| 2799 |
|
| 2800 |
NL80211_ATTR_PROBE_RESP, |
| 2801 |
|
| 2802 |
NL80211_ATTR_DFS_REGION, |
| 2803 |
|
| 2804 |
NL80211_ATTR_DISABLE_HT, |
| 2805 |
NL80211_ATTR_HT_CAPABILITY_MASK, |
| 2806 |
|
| 2807 |
NL80211_ATTR_NOACK_MAP, |
| 2808 |
|
| 2809 |
NL80211_ATTR_INACTIVITY_TIMEOUT, |
| 2810 |
|
| 2811 |
NL80211_ATTR_RX_SIGNAL_DBM, |
| 2812 |
|
| 2813 |
NL80211_ATTR_BG_SCAN_PERIOD, |
| 2814 |
|
| 2815 |
NL80211_ATTR_WDEV, |
| 2816 |
|
| 2817 |
NL80211_ATTR_USER_REG_HINT_TYPE, |
| 2818 |
|
| 2819 |
NL80211_ATTR_CONN_FAILED_REASON, |
| 2820 |
|
| 2821 |
NL80211_ATTR_AUTH_DATA, |
| 2822 |
|
| 2823 |
NL80211_ATTR_VHT_CAPABILITY, |
| 2824 |
|
| 2825 |
NL80211_ATTR_SCAN_FLAGS, |
| 2826 |
|
| 2827 |
NL80211_ATTR_CHANNEL_WIDTH, |
| 2828 |
NL80211_ATTR_CENTER_FREQ1, |
| 2829 |
NL80211_ATTR_CENTER_FREQ2, |
| 2830 |
|
| 2831 |
NL80211_ATTR_P2P_CTWINDOW, |
| 2832 |
NL80211_ATTR_P2P_OPPPS, |
| 2833 |
|
| 2834 |
NL80211_ATTR_LOCAL_MESH_POWER_MODE, |
| 2835 |
|
| 2836 |
NL80211_ATTR_ACL_POLICY, |
| 2837 |
|
| 2838 |
NL80211_ATTR_MAC_ADDRS, |
| 2839 |
|
| 2840 |
NL80211_ATTR_MAC_ACL_MAX, |
| 2841 |
|
| 2842 |
NL80211_ATTR_RADAR_EVENT, |
| 2843 |
|
| 2844 |
NL80211_ATTR_EXT_CAPA, |
| 2845 |
NL80211_ATTR_EXT_CAPA_MASK, |
| 2846 |
|
| 2847 |
NL80211_ATTR_STA_CAPABILITY, |
| 2848 |
NL80211_ATTR_STA_EXT_CAPABILITY, |
| 2849 |
|
| 2850 |
NL80211_ATTR_PROTOCOL_FEATURES, |
| 2851 |
NL80211_ATTR_SPLIT_WIPHY_DUMP, |
| 2852 |
|
| 2853 |
NL80211_ATTR_DISABLE_VHT, |
| 2854 |
NL80211_ATTR_VHT_CAPABILITY_MASK, |
| 2855 |
|
| 2856 |
NL80211_ATTR_MDID, |
| 2857 |
NL80211_ATTR_IE_RIC, |
| 2858 |
|
| 2859 |
NL80211_ATTR_CRIT_PROT_ID, |
| 2860 |
NL80211_ATTR_MAX_CRIT_PROT_DURATION, |
| 2861 |
|
| 2862 |
NL80211_ATTR_PEER_AID, |
| 2863 |
|
| 2864 |
NL80211_ATTR_COALESCE_RULE, |
| 2865 |
|
| 2866 |
NL80211_ATTR_CH_SWITCH_COUNT, |
| 2867 |
NL80211_ATTR_CH_SWITCH_BLOCK_TX, |
| 2868 |
NL80211_ATTR_CSA_IES, |
| 2869 |
NL80211_ATTR_CNTDWN_OFFS_BEACON, |
| 2870 |
NL80211_ATTR_CNTDWN_OFFS_PRESP, |
| 2871 |
|
| 2872 |
NL80211_ATTR_RXMGMT_FLAGS, |
| 2873 |
|
| 2874 |
NL80211_ATTR_STA_SUPPORTED_CHANNELS, |
| 2875 |
|
| 2876 |
NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, |
| 2877 |
|
| 2878 |
NL80211_ATTR_HANDLE_DFS, |
| 2879 |
|
| 2880 |
NL80211_ATTR_SUPPORT_5_MHZ, |
| 2881 |
NL80211_ATTR_SUPPORT_10_MHZ, |
| 2882 |
|
| 2883 |
NL80211_ATTR_OPMODE_NOTIF, |
| 2884 |
|
| 2885 |
NL80211_ATTR_VENDOR_ID, |
| 2886 |
NL80211_ATTR_VENDOR_SUBCMD, |
| 2887 |
NL80211_ATTR_VENDOR_DATA, |
| 2888 |
NL80211_ATTR_VENDOR_EVENTS, |
| 2889 |
|
| 2890 |
NL80211_ATTR_QOS_MAP, |
| 2891 |
|
| 2892 |
NL80211_ATTR_MAC_HINT, |
| 2893 |
NL80211_ATTR_WIPHY_FREQ_HINT, |
| 2894 |
|
| 2895 |
NL80211_ATTR_MAX_AP_ASSOC_STA, |
| 2896 |
|
| 2897 |
NL80211_ATTR_TDLS_PEER_CAPABILITY, |
| 2898 |
|
| 2899 |
NL80211_ATTR_SOCKET_OWNER, |
| 2900 |
|
| 2901 |
NL80211_ATTR_CSA_C_OFFSETS_TX, |
| 2902 |
NL80211_ATTR_MAX_CSA_COUNTERS, |
| 2903 |
|
| 2904 |
NL80211_ATTR_TDLS_INITIATOR, |
| 2905 |
|
| 2906 |
NL80211_ATTR_USE_RRM, |
| 2907 |
|
| 2908 |
NL80211_ATTR_WIPHY_DYN_ACK, |
| 2909 |
|
| 2910 |
NL80211_ATTR_TSID, |
| 2911 |
NL80211_ATTR_USER_PRIO, |
| 2912 |
NL80211_ATTR_ADMITTED_TIME, |
| 2913 |
|
| 2914 |
NL80211_ATTR_SMPS_MODE, |
| 2915 |
|
| 2916 |
NL80211_ATTR_OPER_CLASS, |
| 2917 |
|
| 2918 |
NL80211_ATTR_MAC_MASK, |
| 2919 |
|
| 2920 |
NL80211_ATTR_WIPHY_SELF_MANAGED_REG, |
| 2921 |
|
| 2922 |
NL80211_ATTR_EXT_FEATURES, |
| 2923 |
|
| 2924 |
NL80211_ATTR_SURVEY_RADIO_STATS, |
| 2925 |
|
| 2926 |
NL80211_ATTR_NETNS_FD, |
| 2927 |
|
| 2928 |
NL80211_ATTR_SCHED_SCAN_DELAY, |
| 2929 |
|
| 2930 |
NL80211_ATTR_REG_INDOOR, |
| 2931 |
|
| 2932 |
NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, |
| 2933 |
NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, |
| 2934 |
NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, |
| 2935 |
NL80211_ATTR_SCHED_SCAN_PLANS, |
| 2936 |
|
| 2937 |
NL80211_ATTR_PBSS, |
| 2938 |
|
| 2939 |
NL80211_ATTR_BSS_SELECT, |
| 2940 |
|
| 2941 |
NL80211_ATTR_STA_SUPPORT_P2P_PS, |
| 2942 |
|
| 2943 |
NL80211_ATTR_PAD, |
| 2944 |
|
| 2945 |
NL80211_ATTR_IFTYPE_EXT_CAPA, |
| 2946 |
|
| 2947 |
NL80211_ATTR_MU_MIMO_GROUP_DATA, |
| 2948 |
NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, |
| 2949 |
|
| 2950 |
NL80211_ATTR_SCAN_START_TIME_TSF, |
| 2951 |
NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, |
| 2952 |
NL80211_ATTR_MEASUREMENT_DURATION, |
| 2953 |
NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, |
| 2954 |
|
| 2955 |
NL80211_ATTR_MESH_PEER_AID, |
| 2956 |
|
| 2957 |
NL80211_ATTR_NAN_MASTER_PREF, |
| 2958 |
NL80211_ATTR_BANDS, |
| 2959 |
NL80211_ATTR_NAN_FUNC, |
| 2960 |
NL80211_ATTR_NAN_MATCH, |
| 2961 |
|
| 2962 |
NL80211_ATTR_FILS_KEK, |
| 2963 |
NL80211_ATTR_FILS_NONCES, |
| 2964 |
|
| 2965 |
NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, |
| 2966 |
|
| 2967 |
NL80211_ATTR_BSSID, |
| 2968 |
|
| 2969 |
NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, |
| 2970 |
NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, |
| 2971 |
|
| 2972 |
NL80211_ATTR_TIMEOUT_REASON, |
| 2973 |
|
| 2974 |
NL80211_ATTR_FILS_ERP_USERNAME, |
| 2975 |
NL80211_ATTR_FILS_ERP_REALM, |
| 2976 |
NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, |
| 2977 |
NL80211_ATTR_FILS_ERP_RRK, |
| 2978 |
NL80211_ATTR_FILS_CACHE_ID, |
| 2979 |
|
| 2980 |
NL80211_ATTR_PMK, |
| 2981 |
|
| 2982 |
NL80211_ATTR_SCHED_SCAN_MULTI, |
| 2983 |
NL80211_ATTR_SCHED_SCAN_MAX_REQS, |
| 2984 |
|
| 2985 |
NL80211_ATTR_WANT_1X_4WAY_HS, |
| 2986 |
NL80211_ATTR_PMKR0_NAME, |
| 2987 |
NL80211_ATTR_PORT_AUTHORIZED, |
| 2988 |
|
| 2989 |
NL80211_ATTR_EXTERNAL_AUTH_ACTION, |
| 2990 |
NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, |
| 2991 |
|
| 2992 |
NL80211_ATTR_NSS, |
| 2993 |
NL80211_ATTR_ACK_SIGNAL, |
| 2994 |
|
| 2995 |
NL80211_ATTR_CONTROL_PORT_OVER_NL80211, |
| 2996 |
|
| 2997 |
NL80211_ATTR_TXQ_STATS, |
| 2998 |
NL80211_ATTR_TXQ_LIMIT, |
| 2999 |
NL80211_ATTR_TXQ_MEMORY_LIMIT, |
| 3000 |
NL80211_ATTR_TXQ_QUANTUM, |
| 3001 |
|
| 3002 |
NL80211_ATTR_HE_CAPABILITY, |
| 3003 |
|
| 3004 |
NL80211_ATTR_FTM_RESPONDER, |
| 3005 |
|
| 3006 |
NL80211_ATTR_FTM_RESPONDER_STATS, |
| 3007 |
|
| 3008 |
NL80211_ATTR_TIMEOUT, |
| 3009 |
|
| 3010 |
NL80211_ATTR_PEER_MEASUREMENTS, |
| 3011 |
|
| 3012 |
NL80211_ATTR_AIRTIME_WEIGHT, |
| 3013 |
NL80211_ATTR_STA_TX_POWER_SETTING, |
| 3014 |
NL80211_ATTR_STA_TX_POWER, |
| 3015 |
|
| 3016 |
NL80211_ATTR_SAE_PASSWORD, |
| 3017 |
|
| 3018 |
NL80211_ATTR_TWT_RESPONDER, |
| 3019 |
|
| 3020 |
NL80211_ATTR_HE_OBSS_PD, |
| 3021 |
|
| 3022 |
NL80211_ATTR_WIPHY_EDMG_CHANNELS, |
| 3023 |
NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, |
| 3024 |
|
| 3025 |
NL80211_ATTR_VLAN_ID, |
| 3026 |
|
| 3027 |
NL80211_ATTR_HE_BSS_COLOR, |
| 3028 |
|
| 3029 |
NL80211_ATTR_IFTYPE_AKM_SUITES, |
| 3030 |
|
| 3031 |
NL80211_ATTR_TID_CONFIG, |
| 3032 |
|
| 3033 |
NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, |
| 3034 |
|
| 3035 |
NL80211_ATTR_PMK_LIFETIME, |
| 3036 |
NL80211_ATTR_PMK_REAUTH_THRESHOLD, |
| 3037 |
|
| 3038 |
NL80211_ATTR_RECEIVE_MULTICAST, |
| 3039 |
NL80211_ATTR_WIPHY_FREQ_OFFSET, |
| 3040 |
NL80211_ATTR_CENTER_FREQ1_OFFSET, |
| 3041 |
NL80211_ATTR_SCAN_FREQ_KHZ, |
| 3042 |
|
| 3043 |
NL80211_ATTR_HE_6GHZ_CAPABILITY, |
| 3044 |
|
| 3045 |
NL80211_ATTR_FILS_DISCOVERY, |
| 3046 |
|
| 3047 |
NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, |
| 3048 |
|
| 3049 |
NL80211_ATTR_S1G_CAPABILITY, |
| 3050 |
NL80211_ATTR_S1G_CAPABILITY_MASK, |
| 3051 |
|
| 3052 |
NL80211_ATTR_SAE_PWE, |
| 3053 |
|
| 3054 |
NL80211_ATTR_RECONNECT_REQUESTED, |
| 3055 |
|
| 3056 |
NL80211_ATTR_SAR_SPEC, |
| 3057 |
|
| 3058 |
NL80211_ATTR_DISABLE_HE, |
| 3059 |
|
| 3060 |
/* add attributes here, update the policy in nl80211.c */ |
| 3061 |
|
| 3062 |
__NL80211_ATTR_AFTER_LAST, |
| 3063 |
NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, |
| 3064 |
NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 |
| 3065 |
}; |
| 3066 |
|
| 3067 |
/* source-level API compatibility */ |
| 3068 |
#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION |
| 3069 |
#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG |
| 3070 |
#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER |
| 3071 |
#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA |
| 3072 |
#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON |
| 3073 |
#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP |
| 3074 |
|
| 3075 |
/* |
| 3076 |
* Allow user space programs to use #ifdef on new attributes by defining them |
| 3077 |
* here |
| 3078 |
*/ |
| 3079 |
#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT |
| 3080 |
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY |
| 3081 |
#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES |
| 3082 |
#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS |
| 3083 |
#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ |
| 3084 |
#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE |
| 3085 |
#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE |
| 3086 |
#define NL80211_ATTR_IE NL80211_ATTR_IE |
| 3087 |
#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR |
| 3088 |
#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE |
| 3089 |
#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME |
| 3090 |
#define NL80211_ATTR_SSID NL80211_ATTR_SSID |
| 3091 |
#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE |
| 3092 |
#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE |
| 3093 |
#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE |
| 3094 |
#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP |
| 3095 |
#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS |
| 3096 |
#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES |
| 3097 |
#define NL80211_ATTR_KEY NL80211_ATTR_KEY |
| 3098 |
#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS |
| 3099 |
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS |
| 3100 |
|
| 3101 |
#define NL80211_WIPHY_NAME_MAXLEN 64 |
| 3102 |
|
| 3103 |
#define NL80211_MAX_SUPP_RATES 32 |
| 3104 |
#define NL80211_MAX_SUPP_HT_RATES 77 |
| 3105 |
#define NL80211_MAX_SUPP_REG_RULES 128 |
| 3106 |
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
| 3107 |
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 |
| 3108 |
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 |
| 3109 |
#define NL80211_HT_CAPABILITY_LEN 26 |
| 3110 |
#define NL80211_VHT_CAPABILITY_LEN 12 |
| 3111 |
#define NL80211_HE_MIN_CAPABILITY_LEN 16 |
| 3112 |
#define NL80211_HE_MAX_CAPABILITY_LEN 54 |
| 3113 |
#define NL80211_MAX_NR_CIPHER_SUITES 5 |
| 3114 |
#define NL80211_MAX_NR_AKM_SUITES 2 |
| 3115 |
|
| 3116 |
#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 |
| 3117 |
|
| 3118 |
/* default RSSI threshold for scan results if none specified. */ |
| 3119 |
#define NL80211_SCAN_RSSI_THOLD_OFF -300 |
| 3120 |
|
| 3121 |
#define NL80211_CQM_TXE_MAX_INTVL 1800 |
| 3122 |
|
| 3123 |
/** |
| 3124 |
* enum nl80211_iftype - (virtual) interface types |
| 3125 |
* |
| 3126 |
* @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides |
| 3127 |
* @NL80211_IFTYPE_ADHOC: independent BSS member |
| 3128 |
* @NL80211_IFTYPE_STATION: managed BSS member |
| 3129 |
* @NL80211_IFTYPE_AP: access point |
| 3130 |
* @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces |
| 3131 |
* are a bit special in that they must always be tied to a pre-existing |
| 3132 |
* AP type interface. |
| 3133 |
* @NL80211_IFTYPE_WDS: wireless distribution interface |
| 3134 |
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames |
| 3135 |
* @NL80211_IFTYPE_MESH_POINT: mesh point |
| 3136 |
* @NL80211_IFTYPE_P2P_CLIENT: P2P client |
| 3137 |
* @NL80211_IFTYPE_P2P_GO: P2P group owner |
| 3138 |
* @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev |
| 3139 |
* and therefore can't be created in the normal ways, use the |
| 3140 |
* %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE |
| 3141 |
* commands to create and destroy one |
| 3142 |
* @NL80211_IF_TYPE_OCB: Outside Context of a BSS |
| 3143 |
* This mode corresponds to the MIB variable dot11OCBActivated=true |
| 3144 |
* @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) |
| 3145 |
* @NL80211_IFTYPE_MAX: highest interface type number currently defined |
| 3146 |
* @NUM_NL80211_IFTYPES: number of defined interface types |
| 3147 |
* |
| 3148 |
* These values are used with the %NL80211_ATTR_IFTYPE |
| 3149 |
* to set the type of an interface. |
| 3150 |
* |
| 3151 |
*/ |
| 3152 |
enum nl80211_iftype { |
| 3153 |
NL80211_IFTYPE_UNSPECIFIED, |
| 3154 |
NL80211_IFTYPE_ADHOC, |
| 3155 |
NL80211_IFTYPE_STATION, |
| 3156 |
NL80211_IFTYPE_AP, |
| 3157 |
NL80211_IFTYPE_AP_VLAN, |
| 3158 |
NL80211_IFTYPE_WDS, |
| 3159 |
NL80211_IFTYPE_MONITOR, |
| 3160 |
NL80211_IFTYPE_MESH_POINT, |
| 3161 |
NL80211_IFTYPE_P2P_CLIENT, |
| 3162 |
NL80211_IFTYPE_P2P_GO, |
| 3163 |
NL80211_IFTYPE_P2P_DEVICE, |
| 3164 |
NL80211_IFTYPE_OCB, |
| 3165 |
NL80211_IFTYPE_NAN, |
| 3166 |
|
| 3167 |
/* keep last */ |
| 3168 |
NUM_NL80211_IFTYPES, |
| 3169 |
NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 |
| 3170 |
}; |
| 3171 |
|
| 3172 |
/** |
| 3173 |
* enum nl80211_sta_flags - station flags |
| 3174 |
* |
| 3175 |
* Station flags. When a station is added to an AP interface, it is |
| 3176 |
* assumed to be already associated (and hence authenticated.) |
| 3177 |
* |
| 3178 |
* @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved |
| 3179 |
* @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) |
| 3180 |
* @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames |
| 3181 |
* with short barker preamble |
| 3182 |
* @NL80211_STA_FLAG_WME: station is WME/QoS capable |
| 3183 |
* @NL80211_STA_FLAG_MFP: station uses management frame protection |
| 3184 |
* @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated |
| 3185 |
* @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should |
| 3186 |
* only be used in managed mode (even in the flags mask). Note that the |
| 3187 |
* flag can't be changed, it is only valid while adding a station, and |
| 3188 |
* attempts to change it will silently be ignored (rather than rejected |
| 3189 |
* as errors.) |
| 3190 |
* @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers |
| 3191 |
* that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a |
| 3192 |
* previously added station into associated state |
| 3193 |
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined |
| 3194 |
* @__NL80211_STA_FLAG_AFTER_LAST: internal use |
| 3195 |
*/ |
| 3196 |
enum nl80211_sta_flags { |
| 3197 |
__NL80211_STA_FLAG_INVALID, |
| 3198 |
NL80211_STA_FLAG_AUTHORIZED, |
| 3199 |
NL80211_STA_FLAG_SHORT_PREAMBLE, |
| 3200 |
NL80211_STA_FLAG_WME, |
| 3201 |
NL80211_STA_FLAG_MFP, |
| 3202 |
NL80211_STA_FLAG_AUTHENTICATED, |
| 3203 |
NL80211_STA_FLAG_TDLS_PEER, |
| 3204 |
NL80211_STA_FLAG_ASSOCIATED, |
| 3205 |
|
| 3206 |
/* keep last */ |
| 3207 |
__NL80211_STA_FLAG_AFTER_LAST, |
| 3208 |
NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 |
| 3209 |
}; |
| 3210 |
|
| 3211 |
/** |
| 3212 |
* enum nl80211_sta_p2p_ps_status - station support of P2P PS |
| 3213 |
* |
| 3214 |
* @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism |
| 3215 |
* @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism |
| 3216 |
* @NUM_NL80211_P2P_PS_STATUS: number of values |
| 3217 |
*/ |
| 3218 |
enum nl80211_sta_p2p_ps_status { |
| 3219 |
NL80211_P2P_PS_UNSUPPORTED = 0, |
| 3220 |
NL80211_P2P_PS_SUPPORTED, |
| 3221 |
|
| 3222 |
NUM_NL80211_P2P_PS_STATUS, |
| 3223 |
}; |
| 3224 |
|
| 3225 |
#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER |
| 3226 |
|
| 3227 |
/** |
| 3228 |
* struct nl80211_sta_flag_update - station flags mask/set |
| 3229 |
* @mask: mask of station flags to set |
| 3230 |
* @set: which values to set them to |
| 3231 |
* |
| 3232 |
* Both mask and set contain bits as per &enum nl80211_sta_flags. |
| 3233 |
*/ |
| 3234 |
struct nl80211_sta_flag_update { |
| 3235 |
__u32 mask; |
| 3236 |
__u32 set; |
| 3237 |
} __attribute__((packed)); |
| 3238 |
|
| 3239 |
/** |
| 3240 |
* enum nl80211_he_gi - HE guard interval |
| 3241 |
* @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec |
| 3242 |
* @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec |
| 3243 |
* @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec |
| 3244 |
*/ |
| 3245 |
enum nl80211_he_gi { |
| 3246 |
NL80211_RATE_INFO_HE_GI_0_8, |
| 3247 |
NL80211_RATE_INFO_HE_GI_1_6, |
| 3248 |
NL80211_RATE_INFO_HE_GI_3_2, |
| 3249 |
}; |
| 3250 |
|
| 3251 |
/** |
| 3252 |
* enum nl80211_he_ltf - HE long training field |
| 3253 |
* @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec |
| 3254 |
* @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec |
| 3255 |
* @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec |
| 3256 |
*/ |
| 3257 |
enum nl80211_he_ltf { |
| 3258 |
NL80211_RATE_INFO_HE_1XLTF, |
| 3259 |
NL80211_RATE_INFO_HE_2XLTF, |
| 3260 |
NL80211_RATE_INFO_HE_4XLTF, |
| 3261 |
}; |
| 3262 |
|
| 3263 |
/** |
| 3264 |
* enum nl80211_he_ru_alloc - HE RU allocation values |
| 3265 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation |
| 3266 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation |
| 3267 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation |
| 3268 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation |
| 3269 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation |
| 3270 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation |
| 3271 |
* @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation |
| 3272 |
*/ |
| 3273 |
enum nl80211_he_ru_alloc { |
| 3274 |
NL80211_RATE_INFO_HE_RU_ALLOC_26, |
| 3275 |
NL80211_RATE_INFO_HE_RU_ALLOC_52, |
| 3276 |
NL80211_RATE_INFO_HE_RU_ALLOC_106, |
| 3277 |
NL80211_RATE_INFO_HE_RU_ALLOC_242, |
| 3278 |
NL80211_RATE_INFO_HE_RU_ALLOC_484, |
| 3279 |
NL80211_RATE_INFO_HE_RU_ALLOC_996, |
| 3280 |
NL80211_RATE_INFO_HE_RU_ALLOC_2x996, |
| 3281 |
}; |
| 3282 |
|
| 3283 |
/** |
| 3284 |
* enum nl80211_rate_info - bitrate information |
| 3285 |
* |
| 3286 |
* These attribute types are used with %NL80211_STA_INFO_TXRATE |
| 3287 |
* when getting information about the bitrate of a station. |
| 3288 |
* There are 2 attributes for bitrate, a legacy one that represents |
| 3289 |
* a 16-bit value, and new one that represents a 32-bit value. |
| 3290 |
* If the rate value fits into 16 bit, both attributes are reported |
| 3291 |
* with the same value. If the rate is too high to fit into 16 bits |
| 3292 |
* (>6.5535Gbps) only 32-bit attribute is included. |
| 3293 |
* User space tools encouraged to use the 32-bit attribute and fall |
| 3294 |
* back to the 16-bit one for compatibility with older kernels. |
| 3295 |
* |
| 3296 |
* @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved |
| 3297 |
* @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) |
| 3298 |
* @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) |
| 3299 |
* @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate |
| 3300 |
* @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval |
| 3301 |
* @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) |
| 3302 |
* @NL80211_RATE_INFO_MAX: highest rate_info number currently defined |
| 3303 |
* @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) |
| 3304 |
* @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) |
| 3305 |
* @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate |
| 3306 |
* @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the |
| 3307 |
* same as 160 for purposes of the bitrates |
| 3308 |
* @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate |
| 3309 |
* @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is |
| 3310 |
* a legacy rate and will be reported as the actual bitrate, i.e. |
| 3311 |
* half the base (20 MHz) rate |
| 3312 |
* @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is |
| 3313 |
* a legacy rate and will be reported as the actual bitrate, i.e. |
| 3314 |
* a quarter of the base (20 MHz) rate |
| 3315 |
* @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) |
| 3316 |
* @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) |
| 3317 |
* @NL80211_RATE_INFO_HE_GI: HE guard interval identifier |
| 3318 |
* (u8, see &enum nl80211_he_gi) |
| 3319 |
* @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) |
| 3320 |
* @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then |
| 3321 |
* non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) |
| 3322 |
* @__NL80211_RATE_INFO_AFTER_LAST: internal use |
| 3323 |
*/ |
| 3324 |
enum nl80211_rate_info { |
| 3325 |
__NL80211_RATE_INFO_INVALID, |
| 3326 |
NL80211_RATE_INFO_BITRATE, |
| 3327 |
NL80211_RATE_INFO_MCS, |
| 3328 |
NL80211_RATE_INFO_40_MHZ_WIDTH, |
| 3329 |
NL80211_RATE_INFO_SHORT_GI, |
| 3330 |
NL80211_RATE_INFO_BITRATE32, |
| 3331 |
NL80211_RATE_INFO_VHT_MCS, |
| 3332 |
NL80211_RATE_INFO_VHT_NSS, |
| 3333 |
NL80211_RATE_INFO_80_MHZ_WIDTH, |
| 3334 |
NL80211_RATE_INFO_80P80_MHZ_WIDTH, |
| 3335 |
NL80211_RATE_INFO_160_MHZ_WIDTH, |
| 3336 |
NL80211_RATE_INFO_10_MHZ_WIDTH, |
| 3337 |
NL80211_RATE_INFO_5_MHZ_WIDTH, |
| 3338 |
NL80211_RATE_INFO_HE_MCS, |
| 3339 |
NL80211_RATE_INFO_HE_NSS, |
| 3340 |
NL80211_RATE_INFO_HE_GI, |
| 3341 |
NL80211_RATE_INFO_HE_DCM, |
| 3342 |
NL80211_RATE_INFO_HE_RU_ALLOC, |
| 3343 |
|
| 3344 |
/* keep last */ |
| 3345 |
__NL80211_RATE_INFO_AFTER_LAST, |
| 3346 |
NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 |
| 3347 |
}; |
| 3348 |
|
| 3349 |
/** |
| 3350 |
* enum nl80211_sta_bss_param - BSS information collected by STA |
| 3351 |
* |
| 3352 |
* These attribute types are used with %NL80211_STA_INFO_BSS_PARAM |
| 3353 |
* when getting information about the bitrate of a station. |
| 3354 |
* |
| 3355 |
* @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved |
| 3356 |
* @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) |
| 3357 |
* @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled |
| 3358 |
* (flag) |
| 3359 |
* @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled |
| 3360 |
* (flag) |
| 3361 |
* @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) |
| 3362 |
* @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) |
| 3363 |
* @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined |
| 3364 |
* @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use |
| 3365 |
*/ |
| 3366 |
enum nl80211_sta_bss_param { |
| 3367 |
__NL80211_STA_BSS_PARAM_INVALID, |
| 3368 |
NL80211_STA_BSS_PARAM_CTS_PROT, |
| 3369 |
NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, |
| 3370 |
NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, |
| 3371 |
NL80211_STA_BSS_PARAM_DTIM_PERIOD, |
| 3372 |
NL80211_STA_BSS_PARAM_BEACON_INTERVAL, |
| 3373 |
|
| 3374 |
/* keep last */ |
| 3375 |
__NL80211_STA_BSS_PARAM_AFTER_LAST, |
| 3376 |
NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 |
| 3377 |
}; |
| 3378 |
|
| 3379 |
/** |
| 3380 |
* enum nl80211_sta_info - station information |
| 3381 |
* |
| 3382 |
* These attribute types are used with %NL80211_ATTR_STA_INFO |
| 3383 |
* when getting information about a station. |
| 3384 |
* |
| 3385 |
* @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved |
| 3386 |
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) |
| 3387 |
* @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) |
| 3388 |
* (u32, from this station) |
| 3389 |
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) |
| 3390 |
* (u32, to this station) |
| 3391 |
* @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) |
| 3392 |
* (u64, from this station) |
| 3393 |
* @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) |
| 3394 |
* (u64, to this station) |
| 3395 |
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) |
| 3396 |
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute |
| 3397 |
* containing info as possible, see &enum nl80211_rate_info |
| 3398 |
* @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) |
| 3399 |
* (u32, from this station) |
| 3400 |
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) |
| 3401 |
* (u32, to this station) |
| 3402 |
* @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) |
| 3403 |
* @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) |
| 3404 |
* (u32, to this station) |
| 3405 |
* @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) |
| 3406 |
* @NL80211_STA_INFO_LLID: the station's mesh LLID |
| 3407 |
* @NL80211_STA_INFO_PLID: the station's mesh PLID |
| 3408 |
* @NL80211_STA_INFO_PLINK_STATE: peer link state for the station |
| 3409 |
* (see %enum nl80211_plink_state) |
| 3410 |
* @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested |
| 3411 |
* attribute, like NL80211_STA_INFO_TX_BITRATE. |
| 3412 |
* @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute |
| 3413 |
* containing info as possible, see &enum nl80211_sta_bss_param |
| 3414 |
* @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected |
| 3415 |
* @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. |
| 3416 |
* @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) |
| 3417 |
* @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) |
| 3418 |
* @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode |
| 3419 |
* @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode |
| 3420 |
* @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards |
| 3421 |
* non-peer STA |
| 3422 |
* @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU |
| 3423 |
* Contains a nested array of signal strength attributes (u8, dBm) |
| 3424 |
* @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average |
| 3425 |
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL. |
| 3426 |
* @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the |
| 3427 |
* 802.11 header (u32, kbps) |
| 3428 |
* @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons |
| 3429 |
* (u64) |
| 3430 |
* @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) |
| 3431 |
* @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average |
| 3432 |
* for beacons only (u8, dBm) |
| 3433 |
* @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) |
| 3434 |
* This is a nested attribute where each the inner attribute number is the |
| 3435 |
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; |
| 3436 |
* each one of those is again nested with &enum nl80211_tid_stats |
| 3437 |
* attributes carrying the actual values. |
| 3438 |
* @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames |
| 3439 |
* received from the station (u64, usec) |
| 3440 |
* @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment |
| 3441 |
* @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) |
| 3442 |
* @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) |
| 3443 |
* @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) |
| 3444 |
* (u32, from this station) |
| 3445 |
* @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received |
| 3446 |
* with an FCS error (u32, from this station). This count may not include |
| 3447 |
* some packets with an FCS error due to TA corruption. Hence this counter |
| 3448 |
* might not be fully accurate. |
| 3449 |
* @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a |
| 3450 |
* mesh gate (u8, 0 or 1) |
| 3451 |
* @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames |
| 3452 |
* sent to the station (u64, usec) |
| 3453 |
* @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) |
| 3454 |
* @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station |
| 3455 |
* @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) |
| 3456 |
* of STA's association |
| 3457 |
* @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a |
| 3458 |
* authentication server (u8, 0 or 1) |
| 3459 |
* @__NL80211_STA_INFO_AFTER_LAST: internal |
| 3460 |
* @NL80211_STA_INFO_MAX: highest possible station info attribute |
| 3461 |
*/ |
| 3462 |
enum nl80211_sta_info { |
| 3463 |
__NL80211_STA_INFO_INVALID, |
| 3464 |
NL80211_STA_INFO_INACTIVE_TIME, |
| 3465 |
NL80211_STA_INFO_RX_BYTES, |
| 3466 |
NL80211_STA_INFO_TX_BYTES, |
| 3467 |
NL80211_STA_INFO_LLID, |
| 3468 |
NL80211_STA_INFO_PLID, |
| 3469 |
NL80211_STA_INFO_PLINK_STATE, |
| 3470 |
NL80211_STA_INFO_SIGNAL, |
| 3471 |
NL80211_STA_INFO_TX_BITRATE, |
| 3472 |
NL80211_STA_INFO_RX_PACKETS, |
| 3473 |
NL80211_STA_INFO_TX_PACKETS, |
| 3474 |
NL80211_STA_INFO_TX_RETRIES, |
| 3475 |
NL80211_STA_INFO_TX_FAILED, |
| 3476 |
NL80211_STA_INFO_SIGNAL_AVG, |
| 3477 |
NL80211_STA_INFO_RX_BITRATE, |
| 3478 |
NL80211_STA_INFO_BSS_PARAM, |
| 3479 |
NL80211_STA_INFO_CONNECTED_TIME, |
| 3480 |
NL80211_STA_INFO_STA_FLAGS, |
| 3481 |
NL80211_STA_INFO_BEACON_LOSS, |
| 3482 |
NL80211_STA_INFO_T_OFFSET, |
| 3483 |
NL80211_STA_INFO_LOCAL_PM, |
| 3484 |
NL80211_STA_INFO_PEER_PM, |
| 3485 |
NL80211_STA_INFO_NONPEER_PM, |
| 3486 |
NL80211_STA_INFO_RX_BYTES64, |
| 3487 |
NL80211_STA_INFO_TX_BYTES64, |
| 3488 |
NL80211_STA_INFO_CHAIN_SIGNAL, |
| 3489 |
NL80211_STA_INFO_CHAIN_SIGNAL_AVG, |
| 3490 |
NL80211_STA_INFO_EXPECTED_THROUGHPUT, |
| 3491 |
NL80211_STA_INFO_RX_DROP_MISC, |
| 3492 |
NL80211_STA_INFO_BEACON_RX, |
| 3493 |
NL80211_STA_INFO_BEACON_SIGNAL_AVG, |
| 3494 |
NL80211_STA_INFO_TID_STATS, |
| 3495 |
NL80211_STA_INFO_RX_DURATION, |
| 3496 |
NL80211_STA_INFO_PAD, |
| 3497 |
NL80211_STA_INFO_ACK_SIGNAL, |
| 3498 |
NL80211_STA_INFO_ACK_SIGNAL_AVG, |
| 3499 |
NL80211_STA_INFO_RX_MPDUS, |
| 3500 |
NL80211_STA_INFO_FCS_ERROR_COUNT, |
| 3501 |
NL80211_STA_INFO_CONNECTED_TO_GATE, |
| 3502 |
NL80211_STA_INFO_TX_DURATION, |
| 3503 |
NL80211_STA_INFO_AIRTIME_WEIGHT, |
| 3504 |
NL80211_STA_INFO_AIRTIME_LINK_METRIC, |
| 3505 |
NL80211_STA_INFO_ASSOC_AT_BOOTTIME, |
| 3506 |
NL80211_STA_INFO_CONNECTED_TO_AS, |
| 3507 |
|
| 3508 |
/* keep last */ |
| 3509 |
__NL80211_STA_INFO_AFTER_LAST, |
| 3510 |
NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 |
| 3511 |
}; |
| 3512 |
|
| 3513 |
/* we renamed this - stay compatible */ |
| 3514 |
#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG |
| 3515 |
|
| 3516 |
|
| 3517 |
/** |
| 3518 |
* enum nl80211_tid_stats - per TID statistics attributes |
| 3519 |
* @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved |
| 3520 |
* @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) |
| 3521 |
* @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or |
| 3522 |
* attempted to transmit; u64) |
| 3523 |
* @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for |
| 3524 |
* transmitted MSDUs (not counting the first attempt; u64) |
| 3525 |
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted |
| 3526 |
* MSDUs (u64) |
| 3527 |
* @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment |
| 3528 |
* @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) |
| 3529 |
* @NUM_NL80211_TID_STATS: number of attributes here |
| 3530 |
* @NL80211_TID_STATS_MAX: highest numbered attribute here |
| 3531 |
*/ |
| 3532 |
enum nl80211_tid_stats { |
| 3533 |
__NL80211_TID_STATS_INVALID, |
| 3534 |
NL80211_TID_STATS_RX_MSDU, |
| 3535 |
NL80211_TID_STATS_TX_MSDU, |
| 3536 |
NL80211_TID_STATS_TX_MSDU_RETRIES, |
| 3537 |
NL80211_TID_STATS_TX_MSDU_FAILED, |
| 3538 |
NL80211_TID_STATS_PAD, |
| 3539 |
NL80211_TID_STATS_TXQ_STATS, |
| 3540 |
|
| 3541 |
/* keep last */ |
| 3542 |
NUM_NL80211_TID_STATS, |
| 3543 |
NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 |
| 3544 |
}; |
| 3545 |
|
| 3546 |
/** |
| 3547 |
* enum nl80211_txq_stats - per TXQ statistics attributes |
| 3548 |
* @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved |
| 3549 |
* @NUM_NL80211_TXQ_STATS: number of attributes here |
| 3550 |
* @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged |
| 3551 |
* @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently |
| 3552 |
* backlogged |
| 3553 |
* @NL80211_TXQ_STATS_FLOWS: total number of new flows seen |
| 3554 |
* @NL80211_TXQ_STATS_DROPS: total number of packet drops |
| 3555 |
* @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks |
| 3556 |
* @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow |
| 3557 |
* @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow |
| 3558 |
* (only for per-phy stats) |
| 3559 |
* @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions |
| 3560 |
* @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ |
| 3561 |
* @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ |
| 3562 |
* @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY |
| 3563 |
* @NL80211_TXQ_STATS_MAX: highest numbered attribute here |
| 3564 |
*/ |
| 3565 |
enum nl80211_txq_stats { |
| 3566 |
__NL80211_TXQ_STATS_INVALID, |
| 3567 |
NL80211_TXQ_STATS_BACKLOG_BYTES, |
| 3568 |
NL80211_TXQ_STATS_BACKLOG_PACKETS, |
| 3569 |
NL80211_TXQ_STATS_FLOWS, |
| 3570 |
NL80211_TXQ_STATS_DROPS, |
| 3571 |
NL80211_TXQ_STATS_ECN_MARKS, |
| 3572 |
NL80211_TXQ_STATS_OVERLIMIT, |
| 3573 |
NL80211_TXQ_STATS_OVERMEMORY, |
| 3574 |
NL80211_TXQ_STATS_COLLISIONS, |
| 3575 |
NL80211_TXQ_STATS_TX_BYTES, |
| 3576 |
NL80211_TXQ_STATS_TX_PACKETS, |
| 3577 |
NL80211_TXQ_STATS_MAX_FLOWS, |
| 3578 |
|
| 3579 |
/* keep last */ |
| 3580 |
NUM_NL80211_TXQ_STATS, |
| 3581 |
NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 |
| 3582 |
}; |
| 3583 |
|
| 3584 |
/** |
| 3585 |
* enum nl80211_mpath_flags - nl80211 mesh path flags |
| 3586 |
* |
| 3587 |
* @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active |
| 3588 |
* @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running |
| 3589 |
* @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN |
| 3590 |
* @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set |
| 3591 |
* @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded |
| 3592 |
*/ |
| 3593 |
enum nl80211_mpath_flags { |
| 3594 |
NL80211_MPATH_FLAG_ACTIVE = 1<<0, |
| 3595 |
NL80211_MPATH_FLAG_RESOLVING = 1<<1, |
| 3596 |
NL80211_MPATH_FLAG_SN_VALID = 1<<2, |
| 3597 |
NL80211_MPATH_FLAG_FIXED = 1<<3, |
| 3598 |
NL80211_MPATH_FLAG_RESOLVED = 1<<4, |
| 3599 |
}; |
| 3600 |
|
| 3601 |
/** |
| 3602 |
* enum nl80211_mpath_info - mesh path information |
| 3603 |
* |
| 3604 |
* These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting |
| 3605 |
* information about a mesh path. |
| 3606 |
* |
| 3607 |
* @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved |
| 3608 |
* @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination |
| 3609 |
* @NL80211_MPATH_INFO_SN: destination sequence number |
| 3610 |
* @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path |
| 3611 |
* @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now |
| 3612 |
* @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in |
| 3613 |
* &enum nl80211_mpath_flags; |
| 3614 |
* @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec |
| 3615 |
* @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries |
| 3616 |
* @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination |
| 3617 |
* @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination |
| 3618 |
* @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number |
| 3619 |
* currently defined |
| 3620 |
* @__NL80211_MPATH_INFO_AFTER_LAST: internal use |
| 3621 |
*/ |
| 3622 |
enum nl80211_mpath_info { |
| 3623 |
__NL80211_MPATH_INFO_INVALID, |
| 3624 |
NL80211_MPATH_INFO_FRAME_QLEN, |
| 3625 |
NL80211_MPATH_INFO_SN, |
| 3626 |
NL80211_MPATH_INFO_METRIC, |
| 3627 |
NL80211_MPATH_INFO_EXPTIME, |
| 3628 |
NL80211_MPATH_INFO_FLAGS, |
| 3629 |
NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, |
| 3630 |
NL80211_MPATH_INFO_DISCOVERY_RETRIES, |
| 3631 |
NL80211_MPATH_INFO_HOP_COUNT, |
| 3632 |
NL80211_MPATH_INFO_PATH_CHANGE, |
| 3633 |
|
| 3634 |
/* keep last */ |
| 3635 |
__NL80211_MPATH_INFO_AFTER_LAST, |
| 3636 |
NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 |
| 3637 |
}; |
| 3638 |
|
| 3639 |
/** |
| 3640 |
* enum nl80211_band_iftype_attr - Interface type data attributes |
| 3641 |
* |
| 3642 |
* @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved |
| 3643 |
* @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute |
| 3644 |
* for each interface type that supports the band data |
| 3645 |
* @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE |
| 3646 |
* capabilities IE |
| 3647 |
* @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE |
| 3648 |
* capabilities IE |
| 3649 |
* @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE |
| 3650 |
* capabilities IE |
| 3651 |
* @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as |
| 3652 |
* defined in HE capabilities IE |
| 3653 |
* @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently |
| 3654 |
* defined |
| 3655 |
* @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), |
| 3656 |
* given for all 6 GHz band channels |
| 3657 |
* @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use |
| 3658 |
*/ |
| 3659 |
enum nl80211_band_iftype_attr { |
| 3660 |
__NL80211_BAND_IFTYPE_ATTR_INVALID, |
| 3661 |
|
| 3662 |
NL80211_BAND_IFTYPE_ATTR_IFTYPES, |
| 3663 |
NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, |
| 3664 |
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, |
| 3665 |
NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, |
| 3666 |
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, |
| 3667 |
NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, |
| 3668 |
|
| 3669 |
/* keep last */ |
| 3670 |
__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, |
| 3671 |
NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 |
| 3672 |
}; |
| 3673 |
|
| 3674 |
/** |
| 3675 |
* enum nl80211_band_attr - band attributes |
| 3676 |
* @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved |
| 3677 |
* @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, |
| 3678 |
* an array of nested frequency attributes |
| 3679 |
* @NL80211_BAND_ATTR_RATES: supported bitrates in this band, |
| 3680 |
* an array of nested bitrate attributes |
| 3681 |
* @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as |
| 3682 |
* defined in 802.11n |
| 3683 |
* @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE |
| 3684 |
* @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n |
| 3685 |
* @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n |
| 3686 |
* @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as |
| 3687 |
* defined in 802.11ac |
| 3688 |
* @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE |
| 3689 |
* @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using |
| 3690 |
* attributes from &enum nl80211_band_iftype_attr |
| 3691 |
* @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz |
| 3692 |
* channel(s) that are allowed to be used for EDMG transmissions. |
| 3693 |
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. |
| 3694 |
* @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes |
| 3695 |
* the allowed channel bandwidth configurations. |
| 3696 |
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. |
| 3697 |
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined |
| 3698 |
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use |
| 3699 |
*/ |
| 3700 |
enum nl80211_band_attr { |
| 3701 |
__NL80211_BAND_ATTR_INVALID, |
| 3702 |
NL80211_BAND_ATTR_FREQS, |
| 3703 |
NL80211_BAND_ATTR_RATES, |
| 3704 |
|
| 3705 |
NL80211_BAND_ATTR_HT_MCS_SET, |
| 3706 |
NL80211_BAND_ATTR_HT_CAPA, |
| 3707 |
NL80211_BAND_ATTR_HT_AMPDU_FACTOR, |
| 3708 |
NL80211_BAND_ATTR_HT_AMPDU_DENSITY, |
| 3709 |
|
| 3710 |
NL80211_BAND_ATTR_VHT_MCS_SET, |
| 3711 |
NL80211_BAND_ATTR_VHT_CAPA, |
| 3712 |
NL80211_BAND_ATTR_IFTYPE_DATA, |
| 3713 |
|
| 3714 |
NL80211_BAND_ATTR_EDMG_CHANNELS, |
| 3715 |
NL80211_BAND_ATTR_EDMG_BW_CONFIG, |
| 3716 |
|
| 3717 |
/* keep last */ |
| 3718 |
__NL80211_BAND_ATTR_AFTER_LAST, |
| 3719 |
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 |
| 3720 |
}; |
| 3721 |
|
| 3722 |
#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
| 3723 |
|
| 3724 |
/** |
| 3725 |
* enum nl80211_wmm_rule - regulatory wmm rule |
| 3726 |
* |
| 3727 |
* @__NL80211_WMMR_INVALID: attribute number 0 is reserved |
| 3728 |
* @NL80211_WMMR_CW_MIN: Minimum contention window slot. |
| 3729 |
* @NL80211_WMMR_CW_MAX: Maximum contention window slot. |
| 3730 |
* @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. |
| 3731 |
* @NL80211_WMMR_TXOP: Maximum allowed tx operation time. |
| 3732 |
* @nl80211_WMMR_MAX: highest possible wmm rule. |
| 3733 |
* @__NL80211_WMMR_LAST: Internal use. |
| 3734 |
*/ |
| 3735 |
enum nl80211_wmm_rule { |
| 3736 |
__NL80211_WMMR_INVALID, |
| 3737 |
NL80211_WMMR_CW_MIN, |
| 3738 |
NL80211_WMMR_CW_MAX, |
| 3739 |
NL80211_WMMR_AIFSN, |
| 3740 |
NL80211_WMMR_TXOP, |
| 3741 |
|
| 3742 |
/* keep last */ |
| 3743 |
__NL80211_WMMR_LAST, |
| 3744 |
NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 |
| 3745 |
}; |
| 3746 |
|
| 3747 |
/** |
| 3748 |
* enum nl80211_frequency_attr - frequency attributes |
| 3749 |
* @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved |
| 3750 |
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz |
| 3751 |
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current |
| 3752 |
* regulatory domain. |
| 3753 |
* @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation |
| 3754 |
* are permitted on this channel, this includes sending probe |
| 3755 |
* requests, or modes of operation that require beaconing. |
| 3756 |
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory |
| 3757 |
* on this channel in current regulatory domain. |
| 3758 |
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm |
| 3759 |
* (100 * dBm). |
| 3760 |
* @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS |
| 3761 |
* (enum nl80211_dfs_state) |
| 3762 |
* @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long |
| 3763 |
* this channel is in this DFS state. |
| 3764 |
* @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this |
| 3765 |
* channel as the control channel |
| 3766 |
* @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this |
| 3767 |
* channel as the control channel |
| 3768 |
* @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel |
| 3769 |
* as the primary or any of the secondary channels isn't possible, |
| 3770 |
* this includes 80+80 channels |
| 3771 |
* @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel |
| 3772 |
* using this channel as the primary or any of the secondary channels |
| 3773 |
* isn't possible |
| 3774 |
* @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. |
| 3775 |
* @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this |
| 3776 |
* channel. A channel that has the INDOOR_ONLY attribute can only be |
| 3777 |
* used when there is a clear assessment that the device is operating in |
| 3778 |
* an indoor surroundings, i.e., it is connected to AC power (and not |
| 3779 |
* through portable DC inverters) or is under the control of a master |
| 3780 |
* that is acting as an AP and is connected to AC power. |
| 3781 |
* @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this |
| 3782 |
* channel if it's connected concurrently to a BSS on the same channel on |
| 3783 |
* the 2 GHz band or to a channel in the same UNII band (on the 5 GHz |
| 3784 |
* band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS |
| 3785 |
* off-channel on a channel that has the IR_CONCURRENT attribute set can be |
| 3786 |
* done when there is a clear assessment that the device is operating under |
| 3787 |
* the guidance of an authorized master, i.e., setting up a GO or TDLS |
| 3788 |
* off-channel while the device is also connected to an AP with DFS and |
| 3789 |
* radar detection on the UNII band (it is up to user-space, i.e., |
| 3790 |
* wpa_supplicant to perform the required verifications). Using this |
| 3791 |
* attribute for IR is disallowed for master interfaces (IBSS, AP). |
| 3792 |
* @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed |
| 3793 |
* on this channel in current regulatory domain. |
| 3794 |
* @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed |
| 3795 |
* on this channel in current regulatory domain. |
| 3796 |
* @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. |
| 3797 |
* This is a nested attribute that contains the wmm limitation per AC. |
| 3798 |
* (see &enum nl80211_wmm_rule) |
| 3799 |
* @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel |
| 3800 |
* in current regulatory domain. |
| 3801 |
* @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz |
| 3802 |
* @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed |
| 3803 |
* on this channel in current regulatory domain. |
| 3804 |
* @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed |
| 3805 |
* on this channel in current regulatory domain. |
| 3806 |
* @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed |
| 3807 |
* on this channel in current regulatory domain. |
| 3808 |
* @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed |
| 3809 |
* on this channel in current regulatory domain. |
| 3810 |
* @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed |
| 3811 |
* on this channel in current regulatory domain. |
| 3812 |
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number |
| 3813 |
* currently defined |
| 3814 |
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use |
| 3815 |
* |
| 3816 |
* See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 |
| 3817 |
* for more information on the FCC description of the relaxations allowed |
| 3818 |
* by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and |
| 3819 |
* NL80211_FREQUENCY_ATTR_IR_CONCURRENT. |
| 3820 |
*/ |
| 3821 |
enum nl80211_frequency_attr { |
| 3822 |
__NL80211_FREQUENCY_ATTR_INVALID, |
| 3823 |
NL80211_FREQUENCY_ATTR_FREQ, |
| 3824 |
NL80211_FREQUENCY_ATTR_DISABLED, |
| 3825 |
NL80211_FREQUENCY_ATTR_NO_IR, |
| 3826 |
__NL80211_FREQUENCY_ATTR_NO_IBSS, |
| 3827 |
NL80211_FREQUENCY_ATTR_RADAR, |
| 3828 |
NL80211_FREQUENCY_ATTR_MAX_TX_POWER, |
| 3829 |
NL80211_FREQUENCY_ATTR_DFS_STATE, |
| 3830 |
NL80211_FREQUENCY_ATTR_DFS_TIME, |
| 3831 |
NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, |
| 3832 |
NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, |
| 3833 |
NL80211_FREQUENCY_ATTR_NO_80MHZ, |
| 3834 |
NL80211_FREQUENCY_ATTR_NO_160MHZ, |
| 3835 |
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, |
| 3836 |
NL80211_FREQUENCY_ATTR_INDOOR_ONLY, |
| 3837 |
NL80211_FREQUENCY_ATTR_IR_CONCURRENT, |
| 3838 |
NL80211_FREQUENCY_ATTR_NO_20MHZ, |
| 3839 |
NL80211_FREQUENCY_ATTR_NO_10MHZ, |
| 3840 |
NL80211_FREQUENCY_ATTR_WMM, |
| 3841 |
NL80211_FREQUENCY_ATTR_NO_HE, |
| 3842 |
NL80211_FREQUENCY_ATTR_OFFSET, |
| 3843 |
NL80211_FREQUENCY_ATTR_1MHZ, |
| 3844 |
NL80211_FREQUENCY_ATTR_2MHZ, |
| 3845 |
NL80211_FREQUENCY_ATTR_4MHZ, |
| 3846 |
NL80211_FREQUENCY_ATTR_8MHZ, |
| 3847 |
NL80211_FREQUENCY_ATTR_16MHZ, |
| 3848 |
|
| 3849 |
/* keep last */ |
| 3850 |
__NL80211_FREQUENCY_ATTR_AFTER_LAST, |
| 3851 |
NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 |
| 3852 |
}; |
| 3853 |
|
| 3854 |
#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER |
| 3855 |
#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR |
| 3856 |
#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR |
| 3857 |
#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR |
| 3858 |
#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ |
| 3859 |
NL80211_FREQUENCY_ATTR_IR_CONCURRENT |
| 3860 |
|
| 3861 |
/** |
| 3862 |
* enum nl80211_bitrate_attr - bitrate attributes |
| 3863 |
* @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved |
| 3864 |
* @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps |
| 3865 |
* @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported |
| 3866 |
* in 2.4 GHz band. |
| 3867 |
* @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number |
| 3868 |
* currently defined |
| 3869 |
* @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use |
| 3870 |
*/ |
| 3871 |
enum nl80211_bitrate_attr { |
| 3872 |
__NL80211_BITRATE_ATTR_INVALID, |
| 3873 |
NL80211_BITRATE_ATTR_RATE, |
| 3874 |
NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, |
| 3875 |
|
| 3876 |
/* keep last */ |
| 3877 |
__NL80211_BITRATE_ATTR_AFTER_LAST, |
| 3878 |
NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 |
| 3879 |
}; |
| 3880 |
|
| 3881 |
/** |
| 3882 |
* enum nl80211_initiator - Indicates the initiator of a reg domain request |
| 3883 |
* @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world |
| 3884 |
* regulatory domain. |
| 3885 |
* @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the |
| 3886 |
* regulatory domain. |
| 3887 |
* @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the |
| 3888 |
* wireless core it thinks its knows the regulatory domain we should be in. |
| 3889 |
* @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an |
| 3890 |
* 802.11 country information element with regulatory information it |
| 3891 |
* thinks we should consider. cfg80211 only processes the country |
| 3892 |
* code from the IE, and relies on the regulatory domain information |
| 3893 |
* structure passed by userspace (CRDA) from our wireless-regdb. |
| 3894 |
* If a channel is enabled but the country code indicates it should |
| 3895 |
* be disabled we disable the channel and re-enable it upon disassociation. |
| 3896 |
*/ |
| 3897 |
enum nl80211_reg_initiator { |
| 3898 |
NL80211_REGDOM_SET_BY_CORE, |
| 3899 |
NL80211_REGDOM_SET_BY_USER, |
| 3900 |
NL80211_REGDOM_SET_BY_DRIVER, |
| 3901 |
NL80211_REGDOM_SET_BY_COUNTRY_IE, |
| 3902 |
}; |
| 3903 |
|
| 3904 |
/** |
| 3905 |
* enum nl80211_reg_type - specifies the type of regulatory domain |
| 3906 |
* @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains |
| 3907 |
* to a specific country. When this is set you can count on the |
| 3908 |
* ISO / IEC 3166 alpha2 country code being valid. |
| 3909 |
* @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory |
| 3910 |
* domain. |
| 3911 |
* @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom |
| 3912 |
* driver specific world regulatory domain. These do not apply system-wide |
| 3913 |
* and are only applicable to the individual devices which have requested |
| 3914 |
* them to be applied. |
| 3915 |
* @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product |
| 3916 |
* of an intersection between two regulatory domains -- the previously |
| 3917 |
* set regulatory domain on the system and the last accepted regulatory |
| 3918 |
* domain request to be processed. |
| 3919 |
*/ |
| 3920 |
enum nl80211_reg_type { |
| 3921 |
NL80211_REGDOM_TYPE_COUNTRY, |
| 3922 |
NL80211_REGDOM_TYPE_WORLD, |
| 3923 |
NL80211_REGDOM_TYPE_CUSTOM_WORLD, |
| 3924 |
NL80211_REGDOM_TYPE_INTERSECTION, |
| 3925 |
}; |
| 3926 |
|
| 3927 |
/** |
| 3928 |
* enum nl80211_reg_rule_attr - regulatory rule attributes |
| 3929 |
* @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved |
| 3930 |
* @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional |
| 3931 |
* considerations for a given frequency range. These are the |
| 3932 |
* &enum nl80211_reg_rule_flags. |
| 3933 |
* @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory |
| 3934 |
* rule in KHz. This is not a center of frequency but an actual regulatory |
| 3935 |
* band edge. |
| 3936 |
* @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule |
| 3937 |
* in KHz. This is not a center a frequency but an actual regulatory |
| 3938 |
* band edge. |
| 3939 |
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this |
| 3940 |
* frequency range, in KHz. |
| 3941 |
* @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain |
| 3942 |
* for a given frequency range. The value is in mBi (100 * dBi). |
| 3943 |
* If you don't have one then don't send this. |
| 3944 |
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for |
| 3945 |
* a given frequency range. The value is in mBm (100 * dBm). |
| 3946 |
* @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. |
| 3947 |
* If not present or 0 default CAC time will be used. |
| 3948 |
* @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number |
| 3949 |
* currently defined |
| 3950 |
* @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use |
| 3951 |
*/ |
| 3952 |
enum nl80211_reg_rule_attr { |
| 3953 |
__NL80211_REG_RULE_ATTR_INVALID, |
| 3954 |
NL80211_ATTR_REG_RULE_FLAGS, |
| 3955 |
|
| 3956 |
NL80211_ATTR_FREQ_RANGE_START, |
| 3957 |
NL80211_ATTR_FREQ_RANGE_END, |
| 3958 |
NL80211_ATTR_FREQ_RANGE_MAX_BW, |
| 3959 |
|
| 3960 |
NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, |
| 3961 |
NL80211_ATTR_POWER_RULE_MAX_EIRP, |
| 3962 |
|
| 3963 |
NL80211_ATTR_DFS_CAC_TIME, |
| 3964 |
|
| 3965 |
/* keep last */ |
| 3966 |
__NL80211_REG_RULE_ATTR_AFTER_LAST, |
| 3967 |
NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 |
| 3968 |
}; |
| 3969 |
|
| 3970 |
/** |
| 3971 |
* enum nl80211_sched_scan_match_attr - scheduled scan match attributes |
| 3972 |
* @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved |
| 3973 |
* @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, |
| 3974 |
* only report BSS with matching SSID. |
| 3975 |
* (This cannot be used together with BSSID.) |
| 3976 |
* @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a |
| 3977 |
* BSS in scan results. Filtering is turned off if not specified. Note that |
| 3978 |
* if this attribute is in a match set of its own, then it is treated as |
| 3979 |
* the default value for all matchsets with an SSID, rather than being a |
| 3980 |
* matchset of its own without an RSSI filter. This is due to problems with |
| 3981 |
* how this API was implemented in the past. Also, due to the same problem, |
| 3982 |
* the only way to create a matchset with only an RSSI filter (with this |
| 3983 |
* attribute) is if there's only a single matchset with the RSSI attribute. |
| 3984 |
* @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether |
| 3985 |
* %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or |
| 3986 |
* relative to current bss's RSSI. |
| 3987 |
* @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for |
| 3988 |
* BSS-es in the specified band is to be adjusted before doing |
| 3989 |
* RSSI-based BSS selection. The attribute value is a packed structure |
| 3990 |
* value as specified by &struct nl80211_bss_select_rssi_adjust. |
| 3991 |
* @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching |
| 3992 |
* (this cannot be used together with SSID). |
| 3993 |
* @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the |
| 3994 |
* band specific minimum rssi thresholds for the bands defined in |
| 3995 |
* enum nl80211_band. The minimum rssi threshold value(s32) specific to a |
| 3996 |
* band shall be encapsulated in attribute with type value equals to one |
| 3997 |
* of the NL80211_BAND_* defined in enum nl80211_band. For example, the |
| 3998 |
* minimum rssi threshold value for 2.4GHZ band shall be encapsulated |
| 3999 |
* within an attribute of type NL80211_BAND_2GHZ. And one or more of such |
| 4000 |
* attributes will be nested within this attribute. |
| 4001 |
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter |
| 4002 |
* attribute number currently defined |
| 4003 |
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use |
| 4004 |
*/ |
| 4005 |
enum nl80211_sched_scan_match_attr { |
| 4006 |
__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, |
| 4007 |
|
| 4008 |
NL80211_SCHED_SCAN_MATCH_ATTR_SSID, |
| 4009 |
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, |
| 4010 |
NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, |
| 4011 |
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, |
| 4012 |
NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, |
| 4013 |
NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, |
| 4014 |
|
| 4015 |
/* keep last */ |
| 4016 |
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, |
| 4017 |
NL80211_SCHED_SCAN_MATCH_ATTR_MAX = |
| 4018 |
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 |
| 4019 |
}; |
| 4020 |
|
| 4021 |
/* only for backward compatibility */ |
| 4022 |
#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID |
| 4023 |
|
| 4024 |
/** |
| 4025 |
* enum nl80211_reg_rule_flags - regulatory rule flags |
| 4026 |
* |
| 4027 |
* @NL80211_RRF_NO_OFDM: OFDM modulation not allowed |
| 4028 |
* @NL80211_RRF_NO_CCK: CCK modulation not allowed |
| 4029 |
* @NL80211_RRF_NO_INDOOR: indoor operation not allowed |
| 4030 |
* @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed |
| 4031 |
* @NL80211_RRF_DFS: DFS support is required to be used |
| 4032 |
* @NL80211_RRF_PTP_ONLY: this is only for Point To Point links |
| 4033 |
* @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links |
| 4034 |
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, |
| 4035 |
* this includes probe requests or modes of operation that require |
| 4036 |
* beaconing. |
| 4037 |
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated |
| 4038 |
* base on contiguous rules and wider channels will be allowed to cross |
| 4039 |
* multiple contiguous/overlapping frequency ranges. |
| 4040 |
* @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT |
| 4041 |
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation |
| 4042 |
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation |
| 4043 |
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed |
| 4044 |
* @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed |
| 4045 |
* @NL80211_RRF_NO_HE: HE operation not allowed |
| 4046 |
*/ |
| 4047 |
enum nl80211_reg_rule_flags { |
| 4048 |
NL80211_RRF_NO_OFDM = 1<<0, |
| 4049 |
NL80211_RRF_NO_CCK = 1<<1, |
| 4050 |
NL80211_RRF_NO_INDOOR = 1<<2, |
| 4051 |
NL80211_RRF_NO_OUTDOOR = 1<<3, |
| 4052 |
NL80211_RRF_DFS = 1<<4, |
| 4053 |
NL80211_RRF_PTP_ONLY = 1<<5, |
| 4054 |
NL80211_RRF_PTMP_ONLY = 1<<6, |
| 4055 |
NL80211_RRF_NO_IR = 1<<7, |
| 4056 |
__NL80211_RRF_NO_IBSS = 1<<8, |
| 4057 |
NL80211_RRF_AUTO_BW = 1<<11, |
| 4058 |
NL80211_RRF_IR_CONCURRENT = 1<<12, |
| 4059 |
NL80211_RRF_NO_HT40MINUS = 1<<13, |
| 4060 |
NL80211_RRF_NO_HT40PLUS = 1<<14, |
| 4061 |
NL80211_RRF_NO_80MHZ = 1<<15, |
| 4062 |
NL80211_RRF_NO_160MHZ = 1<<16, |
| 4063 |
NL80211_RRF_NO_HE = 1<<17, |
| 4064 |
}; |
| 4065 |
|
| 4066 |
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR |
| 4067 |
#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR |
| 4068 |
#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR |
| 4069 |
#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ |
| 4070 |
NL80211_RRF_NO_HT40PLUS) |
| 4071 |
#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT |
| 4072 |
|
| 4073 |
/* For backport compatibility with older userspace */ |
| 4074 |
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) |
| 4075 |
|
| 4076 |
/** |
| 4077 |
* enum nl80211_dfs_regions - regulatory DFS regions |
| 4078 |
* |
| 4079 |
* @NL80211_DFS_UNSET: Country has no DFS master region specified |
| 4080 |
* @NL80211_DFS_FCC: Country follows DFS master rules from FCC |
| 4081 |
* @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI |
| 4082 |
* @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec |
| 4083 |
*/ |
| 4084 |
enum nl80211_dfs_regions { |
| 4085 |
NL80211_DFS_UNSET = 0, |
| 4086 |
NL80211_DFS_FCC = 1, |
| 4087 |
NL80211_DFS_ETSI = 2, |
| 4088 |
NL80211_DFS_JP = 3, |
| 4089 |
}; |
| 4090 |
|
| 4091 |
/** |
| 4092 |
* enum nl80211_user_reg_hint_type - type of user regulatory hint |
| 4093 |
* |
| 4094 |
* @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always |
| 4095 |
* assumed if the attribute is not set. |
| 4096 |
* @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular |
| 4097 |
* base station. Device drivers that have been tested to work |
| 4098 |
* properly to support this type of hint can enable these hints |
| 4099 |
* by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature |
| 4100 |
* capability on the struct wiphy. The wireless core will |
| 4101 |
* ignore all cell base station hints until at least one device |
| 4102 |
* present has been registered with the wireless core that |
| 4103 |
* has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a |
| 4104 |
* supported feature. |
| 4105 |
* @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the |
| 4106 |
* platform is operating in an indoor environment. |
| 4107 |
*/ |
| 4108 |
enum nl80211_user_reg_hint_type { |
| 4109 |
NL80211_USER_REG_HINT_USER = 0, |
| 4110 |
NL80211_USER_REG_HINT_CELL_BASE = 1, |
| 4111 |
NL80211_USER_REG_HINT_INDOOR = 2, |
| 4112 |
}; |
| 4113 |
|
| 4114 |
/** |
| 4115 |
* enum nl80211_survey_info - survey information |
| 4116 |
* |
| 4117 |
* These attribute types are used with %NL80211_ATTR_SURVEY_INFO |
| 4118 |
* when getting information about a survey. |
| 4119 |
* |
| 4120 |
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved |
| 4121 |
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel |
| 4122 |
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) |
| 4123 |
* @NL80211_SURVEY_INFO_IN_USE: channel is currently being used |
| 4124 |
* @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio |
| 4125 |
* was turned on (on channel or globally) |
| 4126 |
* @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary |
| 4127 |
* channel was sensed busy (either due to activity or energy detect) |
| 4128 |
* @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension |
| 4129 |
* channel was sensed busy |
| 4130 |
* @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent |
| 4131 |
* receiving data (on channel or globally) |
| 4132 |
* @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent |
| 4133 |
* transmitting data (on channel or globally) |
| 4134 |
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan |
| 4135 |
* (on this channel or globally) |
| 4136 |
* @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment |
| 4137 |
* @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent |
| 4138 |
* receiving frames destined to the local BSS |
| 4139 |
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number |
| 4140 |
* currently defined |
| 4141 |
* @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz |
| 4142 |
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use |
| 4143 |
*/ |
| 4144 |
enum nl80211_survey_info { |
| 4145 |
__NL80211_SURVEY_INFO_INVALID, |
| 4146 |
NL80211_SURVEY_INFO_FREQUENCY, |
| 4147 |
NL80211_SURVEY_INFO_NOISE, |
| 4148 |
NL80211_SURVEY_INFO_IN_USE, |
| 4149 |
NL80211_SURVEY_INFO_TIME, |
| 4150 |
NL80211_SURVEY_INFO_TIME_BUSY, |
| 4151 |
NL80211_SURVEY_INFO_TIME_EXT_BUSY, |
| 4152 |
NL80211_SURVEY_INFO_TIME_RX, |
| 4153 |
NL80211_SURVEY_INFO_TIME_TX, |
| 4154 |
NL80211_SURVEY_INFO_TIME_SCAN, |
| 4155 |
NL80211_SURVEY_INFO_PAD, |
| 4156 |
NL80211_SURVEY_INFO_TIME_BSS_RX, |
| 4157 |
NL80211_SURVEY_INFO_FREQUENCY_OFFSET, |
| 4158 |
|
| 4159 |
/* keep last */ |
| 4160 |
__NL80211_SURVEY_INFO_AFTER_LAST, |
| 4161 |
NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 |
| 4162 |
}; |
| 4163 |
|
| 4164 |
/* keep old names for compatibility */ |
| 4165 |
#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME |
| 4166 |
#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY |
| 4167 |
#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY |
| 4168 |
#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX |
| 4169 |
#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX |
| 4170 |
|
| 4171 |
/** |
| 4172 |
* enum nl80211_mntr_flags - monitor configuration flags |
| 4173 |
* |
| 4174 |
* Monitor configuration flags. |
| 4175 |
* |
| 4176 |
* @__NL80211_MNTR_FLAG_INVALID: reserved |
| 4177 |
* |
| 4178 |
* @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS |
| 4179 |
* @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP |
| 4180 |
* @NL80211_MNTR_FLAG_CONTROL: pass control frames |
| 4181 |
* @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering |
| 4182 |
* @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. |
| 4183 |
* overrides all other flags. |
| 4184 |
* @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address |
| 4185 |
* and ACK incoming unicast packets. |
| 4186 |
* |
| 4187 |
* @__NL80211_MNTR_FLAG_AFTER_LAST: internal use |
| 4188 |
* @NL80211_MNTR_FLAG_MAX: highest possible monitor flag |
| 4189 |
*/ |
| 4190 |
enum nl80211_mntr_flags { |
| 4191 |
__NL80211_MNTR_FLAG_INVALID, |
| 4192 |
NL80211_MNTR_FLAG_FCSFAIL, |
| 4193 |
NL80211_MNTR_FLAG_PLCPFAIL, |
| 4194 |
NL80211_MNTR_FLAG_CONTROL, |
| 4195 |
NL80211_MNTR_FLAG_OTHER_BSS, |
| 4196 |
NL80211_MNTR_FLAG_COOK_FRAMES, |
| 4197 |
NL80211_MNTR_FLAG_ACTIVE, |
| 4198 |
|
| 4199 |
/* keep last */ |
| 4200 |
__NL80211_MNTR_FLAG_AFTER_LAST, |
| 4201 |
NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 |
| 4202 |
}; |
| 4203 |
|
| 4204 |
/** |
| 4205 |
* enum nl80211_mesh_power_mode - mesh power save modes |
| 4206 |
* |
| 4207 |
* @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is |
| 4208 |
* not known or has not been set yet. |
| 4209 |
* @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is |
| 4210 |
* in Awake state all the time. |
| 4211 |
* @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will |
| 4212 |
* alternate between Active and Doze states, but will wake up for |
| 4213 |
* neighbor's beacons. |
| 4214 |
* @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will |
| 4215 |
* alternate between Active and Doze states, but may not wake up |
| 4216 |
* for neighbor's beacons. |
| 4217 |
* |
| 4218 |
* @__NL80211_MESH_POWER_AFTER_LAST - internal use |
| 4219 |
* @NL80211_MESH_POWER_MAX - highest possible power save level |
| 4220 |
*/ |
| 4221 |
|
| 4222 |
enum nl80211_mesh_power_mode { |
| 4223 |
NL80211_MESH_POWER_UNKNOWN, |
| 4224 |
NL80211_MESH_POWER_ACTIVE, |
| 4225 |
NL80211_MESH_POWER_LIGHT_SLEEP, |
| 4226 |
NL80211_MESH_POWER_DEEP_SLEEP, |
| 4227 |
|
| 4228 |
__NL80211_MESH_POWER_AFTER_LAST, |
| 4229 |
NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 |
| 4230 |
}; |
| 4231 |
|
| 4232 |
/** |
| 4233 |
* enum nl80211_meshconf_params - mesh configuration parameters |
| 4234 |
* |
| 4235 |
* Mesh configuration parameters. These can be changed while the mesh is |
| 4236 |
* active. |
| 4237 |
* |
| 4238 |
* @__NL80211_MESHCONF_INVALID: internal use |
| 4239 |
* |
| 4240 |
* @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in |
| 4241 |
* millisecond units, used by the Peer Link Open message |
| 4242 |
* |
| 4243 |
* @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in |
| 4244 |
* millisecond units, used by the peer link management to close a peer link |
| 4245 |
* |
| 4246 |
* @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in |
| 4247 |
* millisecond units |
| 4248 |
* |
| 4249 |
* @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed |
| 4250 |
* on this mesh interface |
| 4251 |
* |
| 4252 |
* @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link |
| 4253 |
* open retries that can be sent to establish a new peer link instance in a |
| 4254 |
* mesh |
| 4255 |
* |
| 4256 |
* @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh |
| 4257 |
* point. |
| 4258 |
* |
| 4259 |
* @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open |
| 4260 |
* peer links when we detect compatible mesh peers. Disabled if |
| 4261 |
* @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are |
| 4262 |
* set. |
| 4263 |
* |
| 4264 |
* @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames |
| 4265 |
* containing a PREQ that an MP can send to a particular destination (path |
| 4266 |
* target) |
| 4267 |
* |
| 4268 |
* @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths |
| 4269 |
* (in milliseconds) |
| 4270 |
* |
| 4271 |
* @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait |
| 4272 |
* until giving up on a path discovery (in milliseconds) |
| 4273 |
* |
| 4274 |
* @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh |
| 4275 |
* points receiving a PREQ shall consider the forwarding information from |
| 4276 |
* the root to be valid. (TU = time unit) |
| 4277 |
* |
| 4278 |
* @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in |
| 4279 |
* TUs) during which an MP can send only one action frame containing a PREQ |
| 4280 |
* reference element |
| 4281 |
* |
| 4282 |
* @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) |
| 4283 |
* that it takes for an HWMP information element to propagate across the |
| 4284 |
* mesh |
| 4285 |
* |
| 4286 |
* @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not |
| 4287 |
* |
| 4288 |
* @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a |
| 4289 |
* source mesh point for path selection elements. |
| 4290 |
* |
| 4291 |
* @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between |
| 4292 |
* root announcements are transmitted. |
| 4293 |
* |
| 4294 |
* @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has |
| 4295 |
* access to a broader network beyond the MBSS. This is done via Root |
| 4296 |
* Announcement frames. |
| 4297 |
* |
| 4298 |
* @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in |
| 4299 |
* TUs) during which a mesh STA can send only one Action frame containing a |
| 4300 |
* PERR element. |
| 4301 |
* |
| 4302 |
* @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding |
| 4303 |
* or forwarding entity (default is TRUE - forwarding entity) |
| 4304 |
* |
| 4305 |
* @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the |
| 4306 |
* threshold for average signal strength of candidate station to establish |
| 4307 |
* a peer link. |
| 4308 |
* |
| 4309 |
* @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors |
| 4310 |
* to synchronize to for 11s default synchronization method |
| 4311 |
* (see 11C.12.2.2) |
| 4312 |
* |
| 4313 |
* @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. |
| 4314 |
* |
| 4315 |
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute |
| 4316 |
* |
| 4317 |
* @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for |
| 4318 |
* which mesh STAs receiving a proactive PREQ shall consider the forwarding |
| 4319 |
* information to the root mesh STA to be valid. |
| 4320 |
* |
| 4321 |
* @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between |
| 4322 |
* proactive PREQs are transmitted. |
| 4323 |
* |
| 4324 |
* @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time |
| 4325 |
* (in TUs) during which a mesh STA can send only one Action frame |
| 4326 |
* containing a PREQ element for root path confirmation. |
| 4327 |
* |
| 4328 |
* @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. |
| 4329 |
* type &enum nl80211_mesh_power_mode (u32) |
| 4330 |
* |
| 4331 |
* @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) |
| 4332 |
* |
| 4333 |
* @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've |
| 4334 |
* established peering with for longer than this time (in seconds), then |
| 4335 |
* remove it from the STA's list of peers. You may set this to 0 to disable |
| 4336 |
* the removal of the STA. Default is 30 minutes. |
| 4337 |
* |
| 4338 |
* @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA |
| 4339 |
* will advertise that it is connected to a gate in the mesh formation |
| 4340 |
* field. If left unset then the mesh formation field will only |
| 4341 |
* advertise such if there is an active root mesh path. |
| 4342 |
* |
| 4343 |
* @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. |
| 4344 |
* PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that |
| 4345 |
* this might not be the optimal decision as a multi-hop route might be |
| 4346 |
* better. So if using this setting you will likely also want to disable |
| 4347 |
* dot11MeshForwarding and use another mesh routing protocol on top. |
| 4348 |
* |
| 4349 |
* @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA |
| 4350 |
* will advertise that it is connected to a authentication server |
| 4351 |
* in the mesh formation field. |
| 4352 |
* |
| 4353 |
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use |
| 4354 |
*/ |
| 4355 |
enum nl80211_meshconf_params { |
| 4356 |
__NL80211_MESHCONF_INVALID, |
| 4357 |
NL80211_MESHCONF_RETRY_TIMEOUT, |
| 4358 |
NL80211_MESHCONF_CONFIRM_TIMEOUT, |
| 4359 |
NL80211_MESHCONF_HOLDING_TIMEOUT, |
| 4360 |
NL80211_MESHCONF_MAX_PEER_LINKS, |
| 4361 |
NL80211_MESHCONF_MAX_RETRIES, |
| 4362 |
NL80211_MESHCONF_TTL, |
| 4363 |
NL80211_MESHCONF_AUTO_OPEN_PLINKS, |
| 4364 |
NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, |
| 4365 |
NL80211_MESHCONF_PATH_REFRESH_TIME, |
| 4366 |
NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, |
| 4367 |
NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, |
| 4368 |
NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, |
| 4369 |
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, |
| 4370 |
NL80211_MESHCONF_HWMP_ROOTMODE, |
| 4371 |
NL80211_MESHCONF_ELEMENT_TTL, |
| 4372 |
NL80211_MESHCONF_HWMP_RANN_INTERVAL, |
| 4373 |
NL80211_MESHCONF_GATE_ANNOUNCEMENTS, |
| 4374 |
NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, |
| 4375 |
NL80211_MESHCONF_FORWARDING, |
| 4376 |
NL80211_MESHCONF_RSSI_THRESHOLD, |
| 4377 |
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, |
| 4378 |
NL80211_MESHCONF_HT_OPMODE, |
| 4379 |
NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, |
| 4380 |
NL80211_MESHCONF_HWMP_ROOT_INTERVAL, |
| 4381 |
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, |
| 4382 |
NL80211_MESHCONF_POWER_MODE, |
| 4383 |
NL80211_MESHCONF_AWAKE_WINDOW, |
| 4384 |
NL80211_MESHCONF_PLINK_TIMEOUT, |
| 4385 |
NL80211_MESHCONF_CONNECTED_TO_GATE, |
| 4386 |
NL80211_MESHCONF_NOLEARN, |
| 4387 |
NL80211_MESHCONF_CONNECTED_TO_AS, |
| 4388 |
|
| 4389 |
/* keep last */ |
| 4390 |
__NL80211_MESHCONF_ATTR_AFTER_LAST, |
| 4391 |
NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 |
| 4392 |
}; |
| 4393 |
|
| 4394 |
/** |
| 4395 |
* enum nl80211_mesh_setup_params - mesh setup parameters |
| 4396 |
* |
| 4397 |
* Mesh setup parameters. These are used to start/join a mesh and cannot be |
| 4398 |
* changed while the mesh is active. |
| 4399 |
* |
| 4400 |
* @__NL80211_MESH_SETUP_INVALID: Internal use |
| 4401 |
* |
| 4402 |
* @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a |
| 4403 |
* vendor specific path selection algorithm or disable it to use the |
| 4404 |
* default HWMP. |
| 4405 |
* |
| 4406 |
* @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a |
| 4407 |
* vendor specific path metric or disable it to use the default Airtime |
| 4408 |
* metric. |
| 4409 |
* |
| 4410 |
* @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a |
| 4411 |
* robust security network ie, or a vendor specific information element |
| 4412 |
* that vendors will use to identify the path selection methods and |
| 4413 |
* metrics in use. |
| 4414 |
* |
| 4415 |
* @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication |
| 4416 |
* daemon will be authenticating mesh candidates. |
| 4417 |
* |
| 4418 |
* @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication |
| 4419 |
* daemon will be securing peer link frames. AMPE is a secured version of |
| 4420 |
* Mesh Peering Management (MPM) and is implemented with the assistance of |
| 4421 |
* a userspace daemon. When this flag is set, the kernel will send peer |
| 4422 |
* management frames to a userspace daemon that will implement AMPE |
| 4423 |
* functionality (security capabilities selection, key confirmation, and |
| 4424 |
* key management). When the flag is unset (default), the kernel can |
| 4425 |
* autonomously complete (unsecured) mesh peering without the need of a |
| 4426 |
* userspace daemon. |
| 4427 |
* |
| 4428 |
* @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a |
| 4429 |
* vendor specific synchronization method or disable it to use the default |
| 4430 |
* neighbor offset synchronization |
| 4431 |
* |
| 4432 |
* @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will |
| 4433 |
* implement an MPM which handles peer allocation and state. |
| 4434 |
* |
| 4435 |
* @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication |
| 4436 |
* method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). |
| 4437 |
* Default is no authentication method required. |
| 4438 |
* |
| 4439 |
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number |
| 4440 |
* |
| 4441 |
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use |
| 4442 |
*/ |
| 4443 |
enum nl80211_mesh_setup_params { |
| 4444 |
__NL80211_MESH_SETUP_INVALID, |
| 4445 |
NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, |
| 4446 |
NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, |
| 4447 |
NL80211_MESH_SETUP_IE, |
| 4448 |
NL80211_MESH_SETUP_USERSPACE_AUTH, |
| 4449 |
NL80211_MESH_SETUP_USERSPACE_AMPE, |
| 4450 |
NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, |
| 4451 |
NL80211_MESH_SETUP_USERSPACE_MPM, |
| 4452 |
NL80211_MESH_SETUP_AUTH_PROTOCOL, |
| 4453 |
|
| 4454 |
/* keep last */ |
| 4455 |
__NL80211_MESH_SETUP_ATTR_AFTER_LAST, |
| 4456 |
NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 |
| 4457 |
}; |
| 4458 |
|
| 4459 |
/** |
| 4460 |
* enum nl80211_txq_attr - TX queue parameter attributes |
| 4461 |
* @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved |
| 4462 |
* @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) |
| 4463 |
* @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning |
| 4464 |
* disabled |
| 4465 |
* @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form |
| 4466 |
* 2^n-1 in the range 1..32767] |
| 4467 |
* @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form |
| 4468 |
* 2^n-1 in the range 1..32767] |
| 4469 |
* @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] |
| 4470 |
* @__NL80211_TXQ_ATTR_AFTER_LAST: Internal |
| 4471 |
* @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number |
| 4472 |
*/ |
| 4473 |
enum nl80211_txq_attr { |
| 4474 |
__NL80211_TXQ_ATTR_INVALID, |
| 4475 |
NL80211_TXQ_ATTR_AC, |
| 4476 |
NL80211_TXQ_ATTR_TXOP, |
| 4477 |
NL80211_TXQ_ATTR_CWMIN, |
| 4478 |
NL80211_TXQ_ATTR_CWMAX, |
| 4479 |
NL80211_TXQ_ATTR_AIFS, |
| 4480 |
|
| 4481 |
/* keep last */ |
| 4482 |
__NL80211_TXQ_ATTR_AFTER_LAST, |
| 4483 |
NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 |
| 4484 |
}; |
| 4485 |
|
| 4486 |
enum nl80211_ac { |
| 4487 |
NL80211_AC_VO, |
| 4488 |
NL80211_AC_VI, |
| 4489 |
NL80211_AC_BE, |
| 4490 |
NL80211_AC_BK, |
| 4491 |
NL80211_NUM_ACS |
| 4492 |
}; |
| 4493 |
|
| 4494 |
/* backward compat */ |
| 4495 |
#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC |
| 4496 |
#define NL80211_TXQ_Q_VO NL80211_AC_VO |
| 4497 |
#define NL80211_TXQ_Q_VI NL80211_AC_VI |
| 4498 |
#define NL80211_TXQ_Q_BE NL80211_AC_BE |
| 4499 |
#define NL80211_TXQ_Q_BK NL80211_AC_BK |
| 4500 |
|
| 4501 |
/** |
| 4502 |
* enum nl80211_channel_type - channel type |
| 4503 |
* @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel |
| 4504 |
* @NL80211_CHAN_HT20: 20 MHz HT channel |
| 4505 |
* @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel |
| 4506 |
* below the control channel |
| 4507 |
* @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel |
| 4508 |
* above the control channel |
| 4509 |
*/ |
| 4510 |
enum nl80211_channel_type { |
| 4511 |
NL80211_CHAN_NO_HT, |
| 4512 |
NL80211_CHAN_HT20, |
| 4513 |
NL80211_CHAN_HT40MINUS, |
| 4514 |
NL80211_CHAN_HT40PLUS |
| 4515 |
}; |
| 4516 |
|
| 4517 |
/** |
| 4518 |
* enum nl80211_key_mode - Key mode |
| 4519 |
* |
| 4520 |
* @NL80211_KEY_RX_TX: (Default) |
| 4521 |
* Key can be used for Rx and Tx immediately |
| 4522 |
* |
| 4523 |
* The following modes can only be selected for unicast keys and when the |
| 4524 |
* driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: |
| 4525 |
* |
| 4526 |
* @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: |
| 4527 |
* Unicast key can only be used for Rx, Tx not allowed, yet |
| 4528 |
* @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: |
| 4529 |
* The unicast key identified by idx and mac is cleared for Tx and becomes |
| 4530 |
* the preferred Tx key for the station. |
| 4531 |
*/ |
| 4532 |
enum nl80211_key_mode { |
| 4533 |
NL80211_KEY_RX_TX, |
| 4534 |
NL80211_KEY_NO_TX, |
| 4535 |
NL80211_KEY_SET_TX |
| 4536 |
}; |
| 4537 |
|
| 4538 |
/** |
| 4539 |
* enum nl80211_chan_width - channel width definitions |
| 4540 |
* |
| 4541 |
* These values are used with the %NL80211_ATTR_CHANNEL_WIDTH |
| 4542 |
* attribute. |
| 4543 |
* |
| 4544 |
* @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel |
| 4545 |
* @NL80211_CHAN_WIDTH_20: 20 MHz HT channel |
| 4546 |
* @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 |
| 4547 |
* attribute must be provided as well |
| 4548 |
* @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 |
| 4549 |
* attribute must be provided as well |
| 4550 |
* @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 |
| 4551 |
* and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well |
| 4552 |
* @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 |
| 4553 |
* attribute must be provided as well |
| 4554 |
* @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel |
| 4555 |
* @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel |
| 4556 |
* @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel |
| 4557 |
* @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel |
| 4558 |
* @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel |
| 4559 |
* @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel |
| 4560 |
* @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel |
| 4561 |
*/ |
| 4562 |
enum nl80211_chan_width { |
| 4563 |
NL80211_CHAN_WIDTH_20_NOHT, |
| 4564 |
NL80211_CHAN_WIDTH_20, |
| 4565 |
NL80211_CHAN_WIDTH_40, |
| 4566 |
NL80211_CHAN_WIDTH_80, |
| 4567 |
NL80211_CHAN_WIDTH_80P80, |
| 4568 |
NL80211_CHAN_WIDTH_160, |
| 4569 |
NL80211_CHAN_WIDTH_5, |
| 4570 |
NL80211_CHAN_WIDTH_10, |
| 4571 |
NL80211_CHAN_WIDTH_1, |
| 4572 |
NL80211_CHAN_WIDTH_2, |
| 4573 |
NL80211_CHAN_WIDTH_4, |
| 4574 |
NL80211_CHAN_WIDTH_8, |
| 4575 |
NL80211_CHAN_WIDTH_16, |
| 4576 |
}; |
| 4577 |
|
| 4578 |
/** |
| 4579 |
* enum nl80211_bss_scan_width - control channel width for a BSS |
| 4580 |
* |
| 4581 |
* These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. |
| 4582 |
* |
| 4583 |
* @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible |
| 4584 |
* @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide |
| 4585 |
* @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide |
| 4586 |
* @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide |
| 4587 |
* @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide |
| 4588 |
*/ |
| 4589 |
enum nl80211_bss_scan_width { |
| 4590 |
NL80211_BSS_CHAN_WIDTH_20, |
| 4591 |
NL80211_BSS_CHAN_WIDTH_10, |
| 4592 |
NL80211_BSS_CHAN_WIDTH_5, |
| 4593 |
NL80211_BSS_CHAN_WIDTH_1, |
| 4594 |
NL80211_BSS_CHAN_WIDTH_2, |
| 4595 |
}; |
| 4596 |
|
| 4597 |
/** |
| 4598 |
* enum nl80211_bss - netlink attributes for a BSS |
| 4599 |
* |
| 4600 |
* @__NL80211_BSS_INVALID: invalid |
| 4601 |
* @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) |
| 4602 |
* @NL80211_BSS_FREQUENCY: frequency in MHz (u32) |
| 4603 |
* @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) |
| 4604 |
* (if @NL80211_BSS_PRESP_DATA is present then this is known to be |
| 4605 |
* from a probe response, otherwise it may be from the same beacon |
| 4606 |
* that the NL80211_BSS_BEACON_TSF will be from) |
| 4607 |
* @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) |
| 4608 |
* @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) |
| 4609 |
* @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the |
| 4610 |
* raw information elements from the probe response/beacon (bin); |
| 4611 |
* if the %NL80211_BSS_BEACON_IES attribute is present and the data is |
| 4612 |
* different then the IEs here are from a Probe Response frame; otherwise |
| 4613 |
* they are from a Beacon frame. |
| 4614 |
* However, if the driver does not indicate the source of the IEs, these |
| 4615 |
* IEs may be from either frame subtype. |
| 4616 |
* If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the |
| 4617 |
* data here is known to be from a probe response, without any heuristics. |
| 4618 |
* @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon |
| 4619 |
* in mBm (100 * dBm) (s32) |
| 4620 |
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon |
| 4621 |
* in unspecified units, scaled to 0..100 (u8) |
| 4622 |
* @NL80211_BSS_STATUS: status, if this BSS is "used" |
| 4623 |
* @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms |
| 4624 |
* @NL80211_BSS_BEACON_IES: binary attribute containing the raw information |
| 4625 |
* elements from a Beacon frame (bin); not present if no Beacon frame has |
| 4626 |
* yet been received |
| 4627 |
* @NL80211_BSS_CHAN_WIDTH: channel width of the control channel |
| 4628 |
* (u32, enum nl80211_bss_scan_width) |
| 4629 |
* @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) |
| 4630 |
* (not present if no beacon frame has been received yet) |
| 4631 |
* @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and |
| 4632 |
* @NL80211_BSS_TSF is known to be from a probe response (flag attribute) |
| 4633 |
* @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry |
| 4634 |
* was last updated by a received frame. The value is expected to be |
| 4635 |
* accurate to about 10ms. (u64, nanoseconds) |
| 4636 |
* @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment |
| 4637 |
* @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first |
| 4638 |
* octet of the timestamp field of the last beacon/probe received for |
| 4639 |
* this BSS. The time is the TSF of the BSS specified by |
| 4640 |
* @NL80211_BSS_PARENT_BSSID. (u64). |
| 4641 |
* @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF |
| 4642 |
* is set. |
| 4643 |
* @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. |
| 4644 |
* Contains a nested array of signal strength attributes (u8, dBm), |
| 4645 |
* using the nesting index as the antenna number. |
| 4646 |
* @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz |
| 4647 |
* @__NL80211_BSS_AFTER_LAST: internal |
| 4648 |
* @NL80211_BSS_MAX: highest BSS attribute |
| 4649 |
*/ |
| 4650 |
enum nl80211_bss { |
| 4651 |
__NL80211_BSS_INVALID, |
| 4652 |
NL80211_BSS_BSSID, |
| 4653 |
NL80211_BSS_FREQUENCY, |
| 4654 |
NL80211_BSS_TSF, |
| 4655 |
NL80211_BSS_BEACON_INTERVAL, |
| 4656 |
NL80211_BSS_CAPABILITY, |
| 4657 |
NL80211_BSS_INFORMATION_ELEMENTS, |
| 4658 |
NL80211_BSS_SIGNAL_MBM, |
| 4659 |
NL80211_BSS_SIGNAL_UNSPEC, |
| 4660 |
NL80211_BSS_STATUS, |
| 4661 |
NL80211_BSS_SEEN_MS_AGO, |
| 4662 |
NL80211_BSS_BEACON_IES, |
| 4663 |
NL80211_BSS_CHAN_WIDTH, |
| 4664 |
NL80211_BSS_BEACON_TSF, |
| 4665 |
NL80211_BSS_PRESP_DATA, |
| 4666 |
NL80211_BSS_LAST_SEEN_BOOTTIME, |
| 4667 |
NL80211_BSS_PAD, |
| 4668 |
NL80211_BSS_PARENT_TSF, |
| 4669 |
NL80211_BSS_PARENT_BSSID, |
| 4670 |
NL80211_BSS_CHAIN_SIGNAL, |
| 4671 |
NL80211_BSS_FREQUENCY_OFFSET, |
| 4672 |
|
| 4673 |
/* keep last */ |
| 4674 |
__NL80211_BSS_AFTER_LAST, |
| 4675 |
NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 |
| 4676 |
}; |
| 4677 |
|
| 4678 |
/** |
| 4679 |
* enum nl80211_bss_status - BSS "status" |
| 4680 |
* @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. |
| 4681 |
* Note that this is no longer used since cfg80211 no longer |
| 4682 |
* keeps track of whether or not authentication was done with |
| 4683 |
* a given BSS. |
| 4684 |
* @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. |
| 4685 |
* @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. |
| 4686 |
* |
| 4687 |
* The BSS status is a BSS attribute in scan dumps, which |
| 4688 |
* indicates the status the interface has wrt. this BSS. |
| 4689 |
*/ |
| 4690 |
enum nl80211_bss_status { |
| 4691 |
NL80211_BSS_STATUS_AUTHENTICATED, |
| 4692 |
NL80211_BSS_STATUS_ASSOCIATED, |
| 4693 |
NL80211_BSS_STATUS_IBSS_JOINED, |
| 4694 |
}; |
| 4695 |
|
| 4696 |
/** |
| 4697 |
* enum nl80211_auth_type - AuthenticationType |
| 4698 |
* |
| 4699 |
* @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication |
| 4700 |
* @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) |
| 4701 |
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) |
| 4702 |
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) |
| 4703 |
* @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals |
| 4704 |
* @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key |
| 4705 |
* @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS |
| 4706 |
* @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key |
| 4707 |
* @__NL80211_AUTHTYPE_NUM: internal |
| 4708 |
* @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm |
| 4709 |
* @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by |
| 4710 |
* trying multiple times); this is invalid in netlink -- leave out |
| 4711 |
* the attribute for this on CONNECT commands. |
| 4712 |
*/ |
| 4713 |
enum nl80211_auth_type { |
| 4714 |
NL80211_AUTHTYPE_OPEN_SYSTEM, |
| 4715 |
NL80211_AUTHTYPE_SHARED_KEY, |
| 4716 |
NL80211_AUTHTYPE_FT, |
| 4717 |
NL80211_AUTHTYPE_NETWORK_EAP, |
| 4718 |
NL80211_AUTHTYPE_SAE, |
| 4719 |
NL80211_AUTHTYPE_FILS_SK, |
| 4720 |
NL80211_AUTHTYPE_FILS_SK_PFS, |
| 4721 |
NL80211_AUTHTYPE_FILS_PK, |
| 4722 |
|
| 4723 |
/* keep last */ |
| 4724 |
__NL80211_AUTHTYPE_NUM, |
| 4725 |
NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, |
| 4726 |
NL80211_AUTHTYPE_AUTOMATIC |
| 4727 |
}; |
| 4728 |
|
| 4729 |
/** |
| 4730 |
* enum nl80211_key_type - Key Type |
| 4731 |
* @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key |
| 4732 |
* @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key |
| 4733 |
* @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) |
| 4734 |
* @NUM_NL80211_KEYTYPES: number of defined key types |
| 4735 |
*/ |
| 4736 |
enum nl80211_key_type { |
| 4737 |
NL80211_KEYTYPE_GROUP, |
| 4738 |
NL80211_KEYTYPE_PAIRWISE, |
| 4739 |
NL80211_KEYTYPE_PEERKEY, |
| 4740 |
|
| 4741 |
NUM_NL80211_KEYTYPES |
| 4742 |
}; |
| 4743 |
|
| 4744 |
/** |
| 4745 |
* enum nl80211_mfp - Management frame protection state |
| 4746 |
* @NL80211_MFP_NO: Management frame protection not used |
| 4747 |
* @NL80211_MFP_REQUIRED: Management frame protection required |
| 4748 |
* @NL80211_MFP_OPTIONAL: Management frame protection is optional |
| 4749 |
*/ |
| 4750 |
enum nl80211_mfp { |
| 4751 |
NL80211_MFP_NO, |
| 4752 |
NL80211_MFP_REQUIRED, |
| 4753 |
NL80211_MFP_OPTIONAL, |
| 4754 |
}; |
| 4755 |
|
| 4756 |
enum nl80211_wpa_versions { |
| 4757 |
NL80211_WPA_VERSION_1 = 1 << 0, |
| 4758 |
NL80211_WPA_VERSION_2 = 1 << 1, |
| 4759 |
NL80211_WPA_VERSION_3 = 1 << 2, |
| 4760 |
}; |
| 4761 |
|
| 4762 |
/** |
| 4763 |
* enum nl80211_key_default_types - key default types |
| 4764 |
* @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid |
| 4765 |
* @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default |
| 4766 |
* unicast key |
| 4767 |
* @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default |
| 4768 |
* multicast key |
| 4769 |
* @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types |
| 4770 |
*/ |
| 4771 |
enum nl80211_key_default_types { |
| 4772 |
__NL80211_KEY_DEFAULT_TYPE_INVALID, |
| 4773 |
NL80211_KEY_DEFAULT_TYPE_UNICAST, |
| 4774 |
NL80211_KEY_DEFAULT_TYPE_MULTICAST, |
| 4775 |
|
| 4776 |
NUM_NL80211_KEY_DEFAULT_TYPES |
| 4777 |
}; |
| 4778 |
|
| 4779 |
/** |
| 4780 |
* enum nl80211_key_attributes - key attributes |
| 4781 |
* @__NL80211_KEY_INVALID: invalid |
| 4782 |
* @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of |
| 4783 |
* 16 bytes encryption key followed by 8 bytes each for TX and RX MIC |
| 4784 |
* keys |
| 4785 |
* @NL80211_KEY_IDX: key ID (u8, 0-3) |
| 4786 |
* @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 |
| 4787 |
* section 7.3.2.25.1, e.g. 0x000FAC04) |
| 4788 |
* @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and |
| 4789 |
* CCMP keys, each six bytes in little endian |
| 4790 |
* @NL80211_KEY_DEFAULT: flag indicating default key |
| 4791 |
* @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key |
| 4792 |
* @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not |
| 4793 |
* specified the default depends on whether a MAC address was |
| 4794 |
* given with the command using the key or not (u32) |
| 4795 |
* @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags |
| 4796 |
* attributes, specifying what a key should be set as default as. |
| 4797 |
* See &enum nl80211_key_default_types. |
| 4798 |
* @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. |
| 4799 |
* Defaults to @NL80211_KEY_RX_TX. |
| 4800 |
* @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key |
| 4801 |
* |
| 4802 |
* @__NL80211_KEY_AFTER_LAST: internal |
| 4803 |
* @NL80211_KEY_MAX: highest key attribute |
| 4804 |
*/ |
| 4805 |
enum nl80211_key_attributes { |
| 4806 |
__NL80211_KEY_INVALID, |
| 4807 |
NL80211_KEY_DATA, |
| 4808 |
NL80211_KEY_IDX, |
| 4809 |
NL80211_KEY_CIPHER, |
| 4810 |
NL80211_KEY_SEQ, |
| 4811 |
NL80211_KEY_DEFAULT, |
| 4812 |
NL80211_KEY_DEFAULT_MGMT, |
| 4813 |
NL80211_KEY_TYPE, |
| 4814 |
NL80211_KEY_DEFAULT_TYPES, |
| 4815 |
NL80211_KEY_MODE, |
| 4816 |
NL80211_KEY_DEFAULT_BEACON, |
| 4817 |
|
| 4818 |
/* keep last */ |
| 4819 |
__NL80211_KEY_AFTER_LAST, |
| 4820 |
NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 |
| 4821 |
}; |
| 4822 |
|
| 4823 |
/** |
| 4824 |
* enum nl80211_tx_rate_attributes - TX rate set attributes |
| 4825 |
* @__NL80211_TXRATE_INVALID: invalid |
| 4826 |
* @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection |
| 4827 |
* in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with |
| 4828 |
* 1 = 500 kbps) but without the IE length restriction (at most |
| 4829 |
* %NL80211_MAX_SUPP_RATES in a single array). |
| 4830 |
* @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection |
| 4831 |
* in an array of MCS numbers. |
| 4832 |
* @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, |
| 4833 |
* see &struct nl80211_txrate_vht |
| 4834 |
* @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi |
| 4835 |
* @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, |
| 4836 |
* see &struct nl80211_txrate_he |
| 4837 |
* @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. |
| 4838 |
* @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. |
| 4839 |
* @__NL80211_TXRATE_AFTER_LAST: internal |
| 4840 |
* @NL80211_TXRATE_MAX: highest TX rate attribute |
| 4841 |
*/ |
| 4842 |
enum nl80211_tx_rate_attributes { |
| 4843 |
__NL80211_TXRATE_INVALID, |
| 4844 |
NL80211_TXRATE_LEGACY, |
| 4845 |
NL80211_TXRATE_HT, |
| 4846 |
NL80211_TXRATE_VHT, |
| 4847 |
NL80211_TXRATE_GI, |
| 4848 |
NL80211_TXRATE_HE, |
| 4849 |
NL80211_TXRATE_HE_GI, |
| 4850 |
NL80211_TXRATE_HE_LTF, |
| 4851 |
|
| 4852 |
/* keep last */ |
| 4853 |
__NL80211_TXRATE_AFTER_LAST, |
| 4854 |
NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 |
| 4855 |
}; |
| 4856 |
|
| 4857 |
#define NL80211_TXRATE_MCS NL80211_TXRATE_HT |
| 4858 |
#define NL80211_VHT_NSS_MAX 8 |
| 4859 |
|
| 4860 |
/** |
| 4861 |
* struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap |
| 4862 |
* @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) |
| 4863 |
*/ |
| 4864 |
struct nl80211_txrate_vht { |
| 4865 |
__u16 mcs[NL80211_VHT_NSS_MAX]; |
| 4866 |
}; |
| 4867 |
|
| 4868 |
#define NL80211_HE_NSS_MAX 8 |
| 4869 |
/** |
| 4870 |
* struct nl80211_txrate_he - HE MCS/NSS txrate bitmap |
| 4871 |
* @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) |
| 4872 |
*/ |
| 4873 |
struct nl80211_txrate_he { |
| 4874 |
__u16 mcs[NL80211_HE_NSS_MAX]; |
| 4875 |
}; |
| 4876 |
|
| 4877 |
enum nl80211_txrate_gi { |
| 4878 |
NL80211_TXRATE_DEFAULT_GI, |
| 4879 |
NL80211_TXRATE_FORCE_SGI, |
| 4880 |
NL80211_TXRATE_FORCE_LGI, |
| 4881 |
}; |
| 4882 |
|
| 4883 |
/** |
| 4884 |
* enum nl80211_band - Frequency band |
| 4885 |
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band |
| 4886 |
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) |
| 4887 |
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) |
| 4888 |
* @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) |
| 4889 |
* @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs |
| 4890 |
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace |
| 4891 |
* since newer kernel versions may support more bands |
| 4892 |
*/ |
| 4893 |
enum nl80211_band { |
| 4894 |
NL80211_BAND_2GHZ, |
| 4895 |
NL80211_BAND_5GHZ, |
| 4896 |
NL80211_BAND_60GHZ, |
| 4897 |
NL80211_BAND_6GHZ, |
| 4898 |
NL80211_BAND_S1GHZ, |
| 4899 |
|
| 4900 |
NUM_NL80211_BANDS, |
| 4901 |
}; |
| 4902 |
|
| 4903 |
/** |
| 4904 |
* enum nl80211_ps_state - powersave state |
| 4905 |
* @NL80211_PS_DISABLED: powersave is disabled |
| 4906 |
* @NL80211_PS_ENABLED: powersave is enabled |
| 4907 |
*/ |
| 4908 |
enum nl80211_ps_state { |
| 4909 |
NL80211_PS_DISABLED, |
| 4910 |
NL80211_PS_ENABLED, |
| 4911 |
}; |
| 4912 |
|
| 4913 |
/** |
| 4914 |
* enum nl80211_attr_cqm - connection quality monitor attributes |
| 4915 |
* @__NL80211_ATTR_CQM_INVALID: invalid |
| 4916 |
* @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies |
| 4917 |
* the threshold for the RSSI level at which an event will be sent. Zero |
| 4918 |
* to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is |
| 4919 |
* set, multiple values can be supplied as a low-to-high sorted array of |
| 4920 |
* threshold values in dBm. Events will be sent when the RSSI value |
| 4921 |
* crosses any of the thresholds. |
| 4922 |
* @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies |
| 4923 |
* the minimum amount the RSSI level must change after an event before a |
| 4924 |
* new event may be issued (to reduce effects of RSSI oscillation). |
| 4925 |
* @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event |
| 4926 |
* @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many |
| 4927 |
* consecutive packets were not acknowledged by the peer |
| 4928 |
* @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures |
| 4929 |
* during the given %NL80211_ATTR_CQM_TXE_INTVL before an |
| 4930 |
* %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and |
| 4931 |
* %NL80211_ATTR_CQM_TXE_PKTS is generated. |
| 4932 |
* @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given |
| 4933 |
* %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is |
| 4934 |
* checked. |
| 4935 |
* @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic |
| 4936 |
* interval in which %NL80211_ATTR_CQM_TXE_PKTS and |
| 4937 |
* %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an |
| 4938 |
* %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. |
| 4939 |
* @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon |
| 4940 |
* loss event |
| 4941 |
* @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the |
| 4942 |
* RSSI threshold event. |
| 4943 |
* @__NL80211_ATTR_CQM_AFTER_LAST: internal |
| 4944 |
* @NL80211_ATTR_CQM_MAX: highest key attribute |
| 4945 |
*/ |
| 4946 |
enum nl80211_attr_cqm { |
| 4947 |
__NL80211_ATTR_CQM_INVALID, |
| 4948 |
NL80211_ATTR_CQM_RSSI_THOLD, |
| 4949 |
NL80211_ATTR_CQM_RSSI_HYST, |
| 4950 |
NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, |
| 4951 |
NL80211_ATTR_CQM_PKT_LOSS_EVENT, |
| 4952 |
NL80211_ATTR_CQM_TXE_RATE, |
| 4953 |
NL80211_ATTR_CQM_TXE_PKTS, |
| 4954 |
NL80211_ATTR_CQM_TXE_INTVL, |
| 4955 |
NL80211_ATTR_CQM_BEACON_LOSS_EVENT, |
| 4956 |
NL80211_ATTR_CQM_RSSI_LEVEL, |
| 4957 |
|
| 4958 |
/* keep last */ |
| 4959 |
__NL80211_ATTR_CQM_AFTER_LAST, |
| 4960 |
NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 |
| 4961 |
}; |
| 4962 |
|
| 4963 |
/** |
| 4964 |
* enum nl80211_cqm_rssi_threshold_event - RSSI threshold event |
| 4965 |
* @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the |
| 4966 |
* configured threshold |
| 4967 |
* @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the |
| 4968 |
* configured threshold |
| 4969 |
* @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) |
| 4970 |
*/ |
| 4971 |
enum nl80211_cqm_rssi_threshold_event { |
| 4972 |
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| 4973 |
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| 4974 |
NL80211_CQM_RSSI_BEACON_LOSS_EVENT, |
| 4975 |
}; |
| 4976 |
|
| 4977 |
|
| 4978 |
/** |
| 4979 |
* enum nl80211_tx_power_setting - TX power adjustment |
| 4980 |
* @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power |
| 4981 |
* @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter |
| 4982 |
* @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter |
| 4983 |
*/ |
| 4984 |
enum nl80211_tx_power_setting { |
| 4985 |
NL80211_TX_POWER_AUTOMATIC, |
| 4986 |
NL80211_TX_POWER_LIMITED, |
| 4987 |
NL80211_TX_POWER_FIXED, |
| 4988 |
}; |
| 4989 |
|
| 4990 |
/** |
| 4991 |
* enum nl80211_tid_config - TID config state |
| 4992 |
* @NL80211_TID_CONFIG_ENABLE: Enable config for the TID |
| 4993 |
* @NL80211_TID_CONFIG_DISABLE: Disable config for the TID |
| 4994 |
*/ |
| 4995 |
enum nl80211_tid_config { |
| 4996 |
NL80211_TID_CONFIG_ENABLE, |
| 4997 |
NL80211_TID_CONFIG_DISABLE, |
| 4998 |
}; |
| 4999 |
|
| 5000 |
/* enum nl80211_tx_rate_setting - TX rate configuration type |
| 5001 |
* @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate |
| 5002 |
* @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter |
| 5003 |
* @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter |
| 5004 |
*/ |
| 5005 |
enum nl80211_tx_rate_setting { |
| 5006 |
NL80211_TX_RATE_AUTOMATIC, |
| 5007 |
NL80211_TX_RATE_LIMITED, |
| 5008 |
NL80211_TX_RATE_FIXED, |
| 5009 |
}; |
| 5010 |
|
| 5011 |
/* enum nl80211_tid_config_attr - TID specific configuration. |
| 5012 |
* @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values |
| 5013 |
* @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported |
| 5014 |
* for per-vif configuration; doesn't list the ones that are generic |
| 5015 |
* (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). |
| 5016 |
* @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but |
| 5017 |
* per peer instead. |
| 5018 |
* @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates |
| 5019 |
* that the new configuration overrides all previous peer |
| 5020 |
* configurations, otherwise previous peer specific configurations |
| 5021 |
* should be left untouched. |
| 5022 |
* @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) |
| 5023 |
* Its type is u16. |
| 5024 |
* @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. |
| 5025 |
* specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. |
| 5026 |
* Its type is u8. |
| 5027 |
* @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame |
| 5028 |
* transmission, user-space sets this configuration in |
| 5029 |
* &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and |
| 5030 |
* the max value is advertised by the driver in this attribute on |
| 5031 |
* output in wiphy capabilities. |
| 5032 |
* @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame |
| 5033 |
* transmission, user-space sets this configuration in |
| 5034 |
* &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and |
| 5035 |
* the max value is advertised by the driver in this attribute on |
| 5036 |
* output in wiphy capabilities. |
| 5037 |
* @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation |
| 5038 |
* for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. |
| 5039 |
* Its type is u8, using the values from &nl80211_tid_config. |
| 5040 |
* @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs |
| 5041 |
* specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using |
| 5042 |
* the values from &nl80211_tid_config. |
| 5043 |
* @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation |
| 5044 |
* for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. |
| 5045 |
* Its type is u8, using the values from &nl80211_tid_config. |
| 5046 |
* @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful |
| 5047 |
* to notfiy the driver that what type of txrate should be used |
| 5048 |
* for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using |
| 5049 |
* the values form &nl80211_tx_rate_setting. |
| 5050 |
* @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied |
| 5051 |
* with the parameters passed through %NL80211_ATTR_TX_RATES. |
| 5052 |
* configuration is applied to the data frame for the tid to that connected |
| 5053 |
* station. |
| 5054 |
*/ |
| 5055 |
enum nl80211_tid_config_attr { |
| 5056 |
__NL80211_TID_CONFIG_ATTR_INVALID, |
| 5057 |
NL80211_TID_CONFIG_ATTR_PAD, |
| 5058 |
NL80211_TID_CONFIG_ATTR_VIF_SUPP, |
| 5059 |
NL80211_TID_CONFIG_ATTR_PEER_SUPP, |
| 5060 |
NL80211_TID_CONFIG_ATTR_OVERRIDE, |
| 5061 |
NL80211_TID_CONFIG_ATTR_TIDS, |
| 5062 |
NL80211_TID_CONFIG_ATTR_NOACK, |
| 5063 |
NL80211_TID_CONFIG_ATTR_RETRY_SHORT, |
| 5064 |
NL80211_TID_CONFIG_ATTR_RETRY_LONG, |
| 5065 |
NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, |
| 5066 |
NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, |
| 5067 |
NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, |
| 5068 |
NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, |
| 5069 |
NL80211_TID_CONFIG_ATTR_TX_RATE, |
| 5070 |
|
| 5071 |
/* keep last */ |
| 5072 |
__NL80211_TID_CONFIG_ATTR_AFTER_LAST, |
| 5073 |
NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 |
| 5074 |
}; |
| 5075 |
|
| 5076 |
/** |
| 5077 |
* enum nl80211_packet_pattern_attr - packet pattern attribute |
| 5078 |
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute |
| 5079 |
* @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has |
| 5080 |
* a zero bit are ignored |
| 5081 |
* @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have |
| 5082 |
* a bit for each byte in the pattern. The lowest-order bit corresponds |
| 5083 |
* to the first byte of the pattern, but the bytes of the pattern are |
| 5084 |
* in a little-endian-like format, i.e. the 9th byte of the pattern |
| 5085 |
* corresponds to the lowest-order bit in the second byte of the mask. |
| 5086 |
* For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where |
| 5087 |
* xx indicates "don't care") would be represented by a pattern of |
| 5088 |
* twelve zero bytes, and a mask of "0xed,0x01". |
| 5089 |
* Note that the pattern matching is done as though frames were not |
| 5090 |
* 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked |
| 5091 |
* first (including SNAP header unpacking) and then matched. |
| 5092 |
* @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after |
| 5093 |
* these fixed number of bytes of received packet |
| 5094 |
* @NUM_NL80211_PKTPAT: number of attributes |
| 5095 |
* @MAX_NL80211_PKTPAT: max attribute number |
| 5096 |
*/ |
| 5097 |
enum nl80211_packet_pattern_attr { |
| 5098 |
__NL80211_PKTPAT_INVALID, |
| 5099 |
NL80211_PKTPAT_MASK, |
| 5100 |
NL80211_PKTPAT_PATTERN, |
| 5101 |
NL80211_PKTPAT_OFFSET, |
| 5102 |
|
| 5103 |
NUM_NL80211_PKTPAT, |
| 5104 |
MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, |
| 5105 |
}; |
| 5106 |
|
| 5107 |
/** |
| 5108 |
* struct nl80211_pattern_support - packet pattern support information |
| 5109 |
* @max_patterns: maximum number of patterns supported |
| 5110 |
* @min_pattern_len: minimum length of each pattern |
| 5111 |
* @max_pattern_len: maximum length of each pattern |
| 5112 |
* @max_pkt_offset: maximum Rx packet offset |
| 5113 |
* |
| 5114 |
* This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when |
| 5115 |
* that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in |
| 5116 |
* %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of |
| 5117 |
* %NL80211_ATTR_COALESCE_RULE in the capability information given |
| 5118 |
* by the kernel to userspace. |
| 5119 |
*/ |
| 5120 |
struct nl80211_pattern_support { |
| 5121 |
__u32 max_patterns; |
| 5122 |
__u32 min_pattern_len; |
| 5123 |
__u32 max_pattern_len; |
| 5124 |
__u32 max_pkt_offset; |
| 5125 |
} __attribute__((packed)); |
| 5126 |
|
| 5127 |
/* only for backward compatibility */ |
| 5128 |
#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID |
| 5129 |
#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK |
| 5130 |
#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN |
| 5131 |
#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET |
| 5132 |
#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT |
| 5133 |
#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT |
| 5134 |
#define nl80211_wowlan_pattern_support nl80211_pattern_support |
| 5135 |
|
| 5136 |
/** |
| 5137 |
* enum nl80211_wowlan_triggers - WoWLAN trigger definitions |
| 5138 |
* @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes |
| 5139 |
* @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put |
| 5140 |
* the chip into a special state -- works best with chips that have |
| 5141 |
* support for low-power operation already (flag) |
| 5142 |
* Note that this mode is incompatible with all of the others, if |
| 5143 |
* any others are even supported by the device. |
| 5144 |
* @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect |
| 5145 |
* is detected is implementation-specific (flag) |
| 5146 |
* @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed |
| 5147 |
* by 16 repetitions of MAC addr, anywhere in payload) (flag) |
| 5148 |
* @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns |
| 5149 |
* which are passed in an array of nested attributes, each nested attribute |
| 5150 |
* defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. |
| 5151 |
* Each pattern defines a wakeup packet. Packet offset is associated with |
| 5152 |
* each pattern which is used while matching the pattern. The matching is |
| 5153 |
* done on the MSDU, i.e. as though the packet was an 802.3 packet, so the |
| 5154 |
* pattern matching is done after the packet is converted to the MSDU. |
| 5155 |
* |
| 5156 |
* In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute |
| 5157 |
* carrying a &struct nl80211_pattern_support. |
| 5158 |
* |
| 5159 |
* When reporting wakeup. it is a u32 attribute containing the 0-based |
| 5160 |
* index of the pattern that caused the wakeup, in the patterns passed |
| 5161 |
* to the kernel when configuring. |
| 5162 |
* @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be |
| 5163 |
* used when setting, used only to indicate that GTK rekeying is supported |
| 5164 |
* by the device (flag) |
| 5165 |
* @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if |
| 5166 |
* done by the device) (flag) |
| 5167 |
* @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request |
| 5168 |
* packet (flag) |
| 5169 |
* @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) |
| 5170 |
* @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released |
| 5171 |
* (on devices that have rfkill in the device) (flag) |
| 5172 |
* @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains |
| 5173 |
* the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame |
| 5174 |
* may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN |
| 5175 |
* attribute contains the original length. |
| 5176 |
* @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 |
| 5177 |
* packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 |
| 5178 |
* attribute if the packet was truncated somewhere. |
| 5179 |
* @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the |
| 5180 |
* 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may |
| 5181 |
* be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute |
| 5182 |
* contains the original length. |
| 5183 |
* @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 |
| 5184 |
* packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 |
| 5185 |
* attribute if the packet was truncated somewhere. |
| 5186 |
* @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section |
| 5187 |
* "TCP connection wakeup" for more details. This is a nested attribute |
| 5188 |
* containing the exact information for establishing and keeping alive |
| 5189 |
* the TCP connection. |
| 5190 |
* @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the |
| 5191 |
* wakeup packet was received on the TCP connection |
| 5192 |
* @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the |
| 5193 |
* TCP connection was lost or failed to be established |
| 5194 |
* @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, |
| 5195 |
* the TCP connection ran out of tokens to use for data to send to the |
| 5196 |
* service |
| 5197 |
* @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network |
| 5198 |
* is detected. This is a nested attribute that contains the |
| 5199 |
* same attributes used with @NL80211_CMD_START_SCHED_SCAN. It |
| 5200 |
* specifies how the scan is performed (e.g. the interval, the |
| 5201 |
* channels to scan and the initial delay) as well as the scan |
| 5202 |
* results that will trigger a wake (i.e. the matchsets). This |
| 5203 |
* attribute is also sent in a response to |
| 5204 |
* @NL80211_CMD_GET_WIPHY, indicating the number of match sets |
| 5205 |
* supported by the driver (u32). |
| 5206 |
* @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute |
| 5207 |
* containing an array with information about what triggered the |
| 5208 |
* wake up. If no elements are present in the array, it means |
| 5209 |
* that the information is not available. If more than one |
| 5210 |
* element is present, it means that more than one match |
| 5211 |
* occurred. |
| 5212 |
* Each element in the array is a nested attribute that contains |
| 5213 |
* one optional %NL80211_ATTR_SSID attribute and one optional |
| 5214 |
* %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of |
| 5215 |
* these attributes must be present. If |
| 5216 |
* %NL80211_ATTR_SCAN_FREQUENCIES contains more than one |
| 5217 |
* frequency, it means that the match occurred in more than one |
| 5218 |
* channel. |
| 5219 |
* @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers |
| 5220 |
* @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number |
| 5221 |
* |
| 5222 |
* These nested attributes are used to configure the wakeup triggers and |
| 5223 |
* to report the wakeup reason(s). |
| 5224 |
*/ |
| 5225 |
enum nl80211_wowlan_triggers { |
| 5226 |
__NL80211_WOWLAN_TRIG_INVALID, |
| 5227 |
NL80211_WOWLAN_TRIG_ANY, |
| 5228 |
NL80211_WOWLAN_TRIG_DISCONNECT, |
| 5229 |
NL80211_WOWLAN_TRIG_MAGIC_PKT, |
| 5230 |
NL80211_WOWLAN_TRIG_PKT_PATTERN, |
| 5231 |
NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, |
| 5232 |
NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, |
| 5233 |
NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, |
| 5234 |
NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, |
| 5235 |
NL80211_WOWLAN_TRIG_RFKILL_RELEASE, |
| 5236 |
NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, |
| 5237 |
NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, |
| 5238 |
NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, |
| 5239 |
NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, |
| 5240 |
NL80211_WOWLAN_TRIG_TCP_CONNECTION, |
| 5241 |
NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, |
| 5242 |
NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, |
| 5243 |
NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, |
| 5244 |
NL80211_WOWLAN_TRIG_NET_DETECT, |
| 5245 |
NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, |
| 5246 |
|
| 5247 |
/* keep last */ |
| 5248 |
NUM_NL80211_WOWLAN_TRIG, |
| 5249 |
MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 |
| 5250 |
}; |
| 5251 |
|
| 5252 |
/** |
| 5253 |
* DOC: TCP connection wakeup |
| 5254 |
* |
| 5255 |
* Some devices can establish a TCP connection in order to be woken up by a |
| 5256 |
* packet coming in from outside their network segment, or behind NAT. If |
| 5257 |
* configured, the device will establish a TCP connection to the given |
| 5258 |
* service, and periodically send data to that service. The first data |
| 5259 |
* packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. |
| 5260 |
* The data packets can optionally include a (little endian) sequence |
| 5261 |
* number (in the TCP payload!) that is generated by the device, and, also |
| 5262 |
* optionally, a token from a list of tokens. This serves as a keep-alive |
| 5263 |
* with the service, and for NATed connections, etc. |
| 5264 |
* |
| 5265 |
* During this keep-alive period, the server doesn't send any data to the |
| 5266 |
* client. When receiving data, it is compared against the wakeup pattern |
| 5267 |
* (and mask) and if it matches, the host is woken up. Similarly, if the |
| 5268 |
* connection breaks or cannot be established to start with, the host is |
| 5269 |
* also woken up. |
| 5270 |
* |
| 5271 |
* Developer's note: ARP offload is required for this, otherwise TCP |
| 5272 |
* response packets might not go through correctly. |
| 5273 |
*/ |
| 5274 |
|
| 5275 |
/** |
| 5276 |
* struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence |
| 5277 |
* @start: starting value |
| 5278 |
* @offset: offset of sequence number in packet |
| 5279 |
* @len: length of the sequence value to write, 1 through 4 |
| 5280 |
* |
| 5281 |
* Note: don't confuse with the TCP sequence number(s), this is for the |
| 5282 |
* keepalive packet payload. The actual value is written into the packet |
| 5283 |
* in little endian. |
| 5284 |
*/ |
| 5285 |
struct nl80211_wowlan_tcp_data_seq { |
| 5286 |
__u32 start, offset, len; |
| 5287 |
}; |
| 5288 |
|
| 5289 |
/** |
| 5290 |
* struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config |
| 5291 |
* @offset: offset of token in packet |
| 5292 |
* @len: length of each token |
| 5293 |
* @token_stream: stream of data to be used for the tokens, the length must |
| 5294 |
* be a multiple of @len for this to make sense |
| 5295 |
*/ |
| 5296 |
struct nl80211_wowlan_tcp_data_token { |
| 5297 |
__u32 offset, len; |
| 5298 |
__u8 token_stream[]; |
| 5299 |
}; |
| 5300 |
|
| 5301 |
/** |
| 5302 |
* struct nl80211_wowlan_tcp_data_token_feature - data token features |
| 5303 |
* @min_len: minimum token length |
| 5304 |
* @max_len: maximum token length |
| 5305 |
* @bufsize: total available token buffer size (max size of @token_stream) |
| 5306 |
*/ |
| 5307 |
struct nl80211_wowlan_tcp_data_token_feature { |
| 5308 |
__u32 min_len, max_len, bufsize; |
| 5309 |
}; |
| 5310 |
|
| 5311 |
/** |
| 5312 |
* enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters |
| 5313 |
* @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes |
| 5314 |
* @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) |
| 5315 |
* @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address |
| 5316 |
* (in network byte order) |
| 5317 |
* @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because |
| 5318 |
* route lookup when configured might be invalid by the time we suspend, |
| 5319 |
* and doing a route lookup when suspending is no longer possible as it |
| 5320 |
* might require ARP querying. |
| 5321 |
* @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a |
| 5322 |
* socket and port will be allocated |
| 5323 |
* @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) |
| 5324 |
* @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. |
| 5325 |
* For feature advertising, a u32 attribute holding the maximum length |
| 5326 |
* of the data payload. |
| 5327 |
* @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration |
| 5328 |
* (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature |
| 5329 |
* advertising it is just a flag |
| 5330 |
* @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, |
| 5331 |
* see &struct nl80211_wowlan_tcp_data_token and for advertising see |
| 5332 |
* &struct nl80211_wowlan_tcp_data_token_feature. |
| 5333 |
* @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum |
| 5334 |
* interval in feature advertising (u32) |
| 5335 |
* @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a |
| 5336 |
* u32 attribute holding the maximum length |
| 5337 |
* @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for |
| 5338 |
* feature advertising. The mask works like @NL80211_PKTPAT_MASK |
| 5339 |
* but on the TCP payload only. |
| 5340 |
* @NUM_NL80211_WOWLAN_TCP: number of TCP attributes |
| 5341 |
* @MAX_NL80211_WOWLAN_TCP: highest attribute number |
| 5342 |
*/ |
| 5343 |
enum nl80211_wowlan_tcp_attrs { |
| 5344 |
__NL80211_WOWLAN_TCP_INVALID, |
| 5345 |
NL80211_WOWLAN_TCP_SRC_IPV4, |
| 5346 |
NL80211_WOWLAN_TCP_DST_IPV4, |
| 5347 |
NL80211_WOWLAN_TCP_DST_MAC, |
| 5348 |
NL80211_WOWLAN_TCP_SRC_PORT, |
| 5349 |
NL80211_WOWLAN_TCP_DST_PORT, |
| 5350 |
NL80211_WOWLAN_TCP_DATA_PAYLOAD, |
| 5351 |
NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, |
| 5352 |
NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, |
| 5353 |
NL80211_WOWLAN_TCP_DATA_INTERVAL, |
| 5354 |
NL80211_WOWLAN_TCP_WAKE_PAYLOAD, |
| 5355 |
NL80211_WOWLAN_TCP_WAKE_MASK, |
| 5356 |
|
| 5357 |
/* keep last */ |
| 5358 |
NUM_NL80211_WOWLAN_TCP, |
| 5359 |
MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 |
| 5360 |
}; |
| 5361 |
|
| 5362 |
/** |
| 5363 |
* struct nl80211_coalesce_rule_support - coalesce rule support information |
| 5364 |
* @max_rules: maximum number of rules supported |
| 5365 |
* @pat: packet pattern support information |
| 5366 |
* @max_delay: maximum supported coalescing delay in msecs |
| 5367 |
* |
| 5368 |
* This struct is carried in %NL80211_ATTR_COALESCE_RULE in the |
| 5369 |
* capability information given by the kernel to userspace. |
| 5370 |
*/ |
| 5371 |
struct nl80211_coalesce_rule_support { |
| 5372 |
__u32 max_rules; |
| 5373 |
struct nl80211_pattern_support pat; |
| 5374 |
__u32 max_delay; |
| 5375 |
} __attribute__((packed)); |
| 5376 |
|
| 5377 |
/** |
| 5378 |
* enum nl80211_attr_coalesce_rule - coalesce rule attribute |
| 5379 |
* @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute |
| 5380 |
* @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing |
| 5381 |
* @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, |
| 5382 |
* see &enum nl80211_coalesce_condition. |
| 5383 |
* @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched |
| 5384 |
* after these fixed number of bytes of received packet |
| 5385 |
* @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes |
| 5386 |
* @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number |
| 5387 |
*/ |
| 5388 |
enum nl80211_attr_coalesce_rule { |
| 5389 |
__NL80211_COALESCE_RULE_INVALID, |
| 5390 |
NL80211_ATTR_COALESCE_RULE_DELAY, |
| 5391 |
NL80211_ATTR_COALESCE_RULE_CONDITION, |
| 5392 |
NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, |
| 5393 |
|
| 5394 |
/* keep last */ |
| 5395 |
NUM_NL80211_ATTR_COALESCE_RULE, |
| 5396 |
NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 |
| 5397 |
}; |
| 5398 |
|
| 5399 |
/** |
| 5400 |
* enum nl80211_coalesce_condition - coalesce rule conditions |
| 5401 |
* @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns |
| 5402 |
* in a rule are matched. |
| 5403 |
* @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns |
| 5404 |
* in a rule are not matched. |
| 5405 |
*/ |
| 5406 |
enum nl80211_coalesce_condition { |
| 5407 |
NL80211_COALESCE_CONDITION_MATCH, |
| 5408 |
NL80211_COALESCE_CONDITION_NO_MATCH |
| 5409 |
}; |
| 5410 |
|
| 5411 |
/** |
| 5412 |
* enum nl80211_iface_limit_attrs - limit attributes |
| 5413 |
* @NL80211_IFACE_LIMIT_UNSPEC: (reserved) |
| 5414 |
* @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that |
| 5415 |
* can be chosen from this set of interface types (u32) |
| 5416 |
* @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a |
| 5417 |
* flag attribute for each interface type in this set |
| 5418 |
* @NUM_NL80211_IFACE_LIMIT: number of attributes |
| 5419 |
* @MAX_NL80211_IFACE_LIMIT: highest attribute number |
| 5420 |
*/ |
| 5421 |
enum nl80211_iface_limit_attrs { |
| 5422 |
NL80211_IFACE_LIMIT_UNSPEC, |
| 5423 |
NL80211_IFACE_LIMIT_MAX, |
| 5424 |
NL80211_IFACE_LIMIT_TYPES, |
| 5425 |
|
| 5426 |
/* keep last */ |
| 5427 |
NUM_NL80211_IFACE_LIMIT, |
| 5428 |
MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 |
| 5429 |
}; |
| 5430 |
|
| 5431 |
/** |
| 5432 |
* enum nl80211_if_combination_attrs -- interface combination attributes |
| 5433 |
* |
| 5434 |
* @NL80211_IFACE_COMB_UNSPEC: (reserved) |
| 5435 |
* @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits |
| 5436 |
* for given interface types, see &enum nl80211_iface_limit_attrs. |
| 5437 |
* @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of |
| 5438 |
* interfaces that can be created in this group. This number doesn't |
| 5439 |
* apply to interfaces purely managed in software, which are listed |
| 5440 |
* in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. |
| 5441 |
* @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that |
| 5442 |
* beacon intervals within this group must be all the same even for |
| 5443 |
* infrastructure and AP/GO combinations, i.e. the GO(s) must adopt |
| 5444 |
* the infrastructure network's beacon interval. |
| 5445 |
* @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many |
| 5446 |
* different channels may be used within this group. |
| 5447 |
* @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap |
| 5448 |
* of supported channel widths for radar detection. |
| 5449 |
* @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap |
| 5450 |
* of supported regulatory regions for radar detection. |
| 5451 |
* @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of |
| 5452 |
* different beacon intervals supported by all the interface combinations |
| 5453 |
* in this group (if not present, all beacon intervals be identical). |
| 5454 |
* @NUM_NL80211_IFACE_COMB: number of attributes |
| 5455 |
* @MAX_NL80211_IFACE_COMB: highest attribute number |
| 5456 |
* |
| 5457 |
* Examples: |
| 5458 |
* limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 |
| 5459 |
* => allows an AP and a STA that must match BIs |
| 5460 |
* |
| 5461 |
* numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, |
| 5462 |
* => allows 8 of AP/GO that can have BI gcd >= min gcd |
| 5463 |
* |
| 5464 |
* numbers = [ #{STA} <= 2 ], channels = 2, max = 2 |
| 5465 |
* => allows two STAs on different channels |
| 5466 |
* |
| 5467 |
* numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 |
| 5468 |
* => allows a STA plus three P2P interfaces |
| 5469 |
* |
| 5470 |
* The list of these four possibilities could completely be contained |
| 5471 |
* within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate |
| 5472 |
* that any of these groups must match. |
| 5473 |
* |
| 5474 |
* "Combinations" of just a single interface will not be listed here, |
| 5475 |
* a single interface of any valid interface type is assumed to always |
| 5476 |
* be possible by itself. This means that implicitly, for each valid |
| 5477 |
* interface type, the following group always exists: |
| 5478 |
* numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 |
| 5479 |
*/ |
| 5480 |
enum nl80211_if_combination_attrs { |
| 5481 |
NL80211_IFACE_COMB_UNSPEC, |
| 5482 |
NL80211_IFACE_COMB_LIMITS, |
| 5483 |
NL80211_IFACE_COMB_MAXNUM, |
| 5484 |
NL80211_IFACE_COMB_STA_AP_BI_MATCH, |
| 5485 |
NL80211_IFACE_COMB_NUM_CHANNELS, |
| 5486 |
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, |
| 5487 |
NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, |
| 5488 |
NL80211_IFACE_COMB_BI_MIN_GCD, |
| 5489 |
|
| 5490 |
/* keep last */ |
| 5491 |
NUM_NL80211_IFACE_COMB, |
| 5492 |
MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 |
| 5493 |
}; |
| 5494 |
|
| 5495 |
|
| 5496 |
/** |
| 5497 |
* enum nl80211_plink_state - state of a mesh peer link finite state machine |
| 5498 |
* |
| 5499 |
* @NL80211_PLINK_LISTEN: initial state, considered the implicit |
| 5500 |
* state of non existent mesh peer links |
| 5501 |
* @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to |
| 5502 |
* this mesh peer |
| 5503 |
* @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received |
| 5504 |
* from this mesh peer |
| 5505 |
* @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been |
| 5506 |
* received from this mesh peer |
| 5507 |
* @NL80211_PLINK_ESTAB: mesh peer link is established |
| 5508 |
* @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled |
| 5509 |
* @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh |
| 5510 |
* plink are discarded |
| 5511 |
* @NUM_NL80211_PLINK_STATES: number of peer link states |
| 5512 |
* @MAX_NL80211_PLINK_STATES: highest numerical value of plink states |
| 5513 |
*/ |
| 5514 |
enum nl80211_plink_state { |
| 5515 |
NL80211_PLINK_LISTEN, |
| 5516 |
NL80211_PLINK_OPN_SNT, |
| 5517 |
NL80211_PLINK_OPN_RCVD, |
| 5518 |
NL80211_PLINK_CNF_RCVD, |
| 5519 |
NL80211_PLINK_ESTAB, |
| 5520 |
NL80211_PLINK_HOLDING, |
| 5521 |
NL80211_PLINK_BLOCKED, |
| 5522 |
|
| 5523 |
/* keep last */ |
| 5524 |
NUM_NL80211_PLINK_STATES, |
| 5525 |
MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 |
| 5526 |
}; |
| 5527 |
|
| 5528 |
/** |
| 5529 |
* enum nl80211_plink_action - actions to perform in mesh peers |
| 5530 |
* |
| 5531 |
* @NL80211_PLINK_ACTION_NO_ACTION: perform no action |
| 5532 |
* @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment |
| 5533 |
* @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer |
| 5534 |
* @NUM_NL80211_PLINK_ACTIONS: number of possible actions |
| 5535 |
*/ |
| 5536 |
enum plink_actions { |
| 5537 |
NL80211_PLINK_ACTION_NO_ACTION, |
| 5538 |
NL80211_PLINK_ACTION_OPEN, |
| 5539 |
NL80211_PLINK_ACTION_BLOCK, |
| 5540 |
|
| 5541 |
NUM_NL80211_PLINK_ACTIONS, |
| 5542 |
}; |
| 5543 |
|
| 5544 |
|
| 5545 |
#define NL80211_KCK_LEN 16 |
| 5546 |
#define NL80211_KEK_LEN 16 |
| 5547 |
#define NL80211_KCK_EXT_LEN 24 |
| 5548 |
#define NL80211_KEK_EXT_LEN 32 |
| 5549 |
#define NL80211_REPLAY_CTR_LEN 8 |
| 5550 |
|
| 5551 |
/** |
| 5552 |
* enum nl80211_rekey_data - attributes for GTK rekey offload |
| 5553 |
* @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes |
| 5554 |
* @NL80211_REKEY_DATA_KEK: key encryption key (binary) |
| 5555 |
* @NL80211_REKEY_DATA_KCK: key confirmation key (binary) |
| 5556 |
* @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) |
| 5557 |
* @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) |
| 5558 |
* @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) |
| 5559 |
* @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) |
| 5560 |
*/ |
| 5561 |
enum nl80211_rekey_data { |
| 5562 |
__NL80211_REKEY_DATA_INVALID, |
| 5563 |
NL80211_REKEY_DATA_KEK, |
| 5564 |
NL80211_REKEY_DATA_KCK, |
| 5565 |
NL80211_REKEY_DATA_REPLAY_CTR, |
| 5566 |
NL80211_REKEY_DATA_AKM, |
| 5567 |
|
| 5568 |
/* keep last */ |
| 5569 |
NUM_NL80211_REKEY_DATA, |
| 5570 |
MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 |
| 5571 |
}; |
| 5572 |
|
| 5573 |
/** |
| 5574 |
* enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID |
| 5575 |
* @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in |
| 5576 |
* Beacon frames) |
| 5577 |
* @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element |
| 5578 |
* in Beacon frames |
| 5579 |
* @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID |
| 5580 |
* element in Beacon frames but zero out each byte in the SSID |
| 5581 |
*/ |
| 5582 |
enum nl80211_hidden_ssid { |
| 5583 |
NL80211_HIDDEN_SSID_NOT_IN_USE, |
| 5584 |
NL80211_HIDDEN_SSID_ZERO_LEN, |
| 5585 |
NL80211_HIDDEN_SSID_ZERO_CONTENTS |
| 5586 |
}; |
| 5587 |
|
| 5588 |
/** |
| 5589 |
* enum nl80211_sta_wme_attr - station WME attributes |
| 5590 |
* @__NL80211_STA_WME_INVALID: invalid number for nested attribute |
| 5591 |
* @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format |
| 5592 |
* is the same as the AC bitmap in the QoS info field. |
| 5593 |
* @NL80211_STA_WME_MAX_SP: max service period. the format is the same |
| 5594 |
* as the MAX_SP field in the QoS info field (but already shifted down). |
| 5595 |
* @__NL80211_STA_WME_AFTER_LAST: internal |
| 5596 |
* @NL80211_STA_WME_MAX: highest station WME attribute |
| 5597 |
*/ |
| 5598 |
enum nl80211_sta_wme_attr { |
| 5599 |
__NL80211_STA_WME_INVALID, |
| 5600 |
NL80211_STA_WME_UAPSD_QUEUES, |
| 5601 |
NL80211_STA_WME_MAX_SP, |
| 5602 |
|
| 5603 |
/* keep last */ |
| 5604 |
__NL80211_STA_WME_AFTER_LAST, |
| 5605 |
NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 |
| 5606 |
}; |
| 5607 |
|
| 5608 |
/** |
| 5609 |
* enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates |
| 5610 |
* @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes |
| 5611 |
* @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher |
| 5612 |
* priority) |
| 5613 |
* @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) |
| 5614 |
* @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) |
| 5615 |
* @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes |
| 5616 |
* (internal) |
| 5617 |
* @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute |
| 5618 |
* (internal) |
| 5619 |
*/ |
| 5620 |
enum nl80211_pmksa_candidate_attr { |
| 5621 |
__NL80211_PMKSA_CANDIDATE_INVALID, |
| 5622 |
NL80211_PMKSA_CANDIDATE_INDEX, |
| 5623 |
NL80211_PMKSA_CANDIDATE_BSSID, |
| 5624 |
NL80211_PMKSA_CANDIDATE_PREAUTH, |
| 5625 |
|
| 5626 |
/* keep last */ |
| 5627 |
NUM_NL80211_PMKSA_CANDIDATE, |
| 5628 |
MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 |
| 5629 |
}; |
| 5630 |
|
| 5631 |
/** |
| 5632 |
* enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION |
| 5633 |
* @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request |
| 5634 |
* @NL80211_TDLS_SETUP: Setup TDLS link |
| 5635 |
* @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established |
| 5636 |
* @NL80211_TDLS_ENABLE_LINK: Enable TDLS link |
| 5637 |
* @NL80211_TDLS_DISABLE_LINK: Disable TDLS link |
| 5638 |
*/ |
| 5639 |
enum nl80211_tdls_operation { |
| 5640 |
NL80211_TDLS_DISCOVERY_REQ, |
| 5641 |
NL80211_TDLS_SETUP, |
| 5642 |
NL80211_TDLS_TEARDOWN, |
| 5643 |
NL80211_TDLS_ENABLE_LINK, |
| 5644 |
NL80211_TDLS_DISABLE_LINK, |
| 5645 |
}; |
| 5646 |
|
| 5647 |
/* |
| 5648 |
* enum nl80211_ap_sme_features - device-integrated AP features |
| 5649 |
* Reserved for future use, no bits are defined in |
| 5650 |
* NL80211_ATTR_DEVICE_AP_SME yet. |
| 5651 |
enum nl80211_ap_sme_features { |
| 5652 |
}; |
| 5653 |
*/ |
| 5654 |
|
| 5655 |
/** |
| 5656 |
* enum nl80211_feature_flags - device/driver features |
| 5657 |
* @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back |
| 5658 |
* TX status to the socket error queue when requested with the |
| 5659 |
* socket option. |
| 5660 |
* @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. |
| 5661 |
* @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up |
| 5662 |
* the connected inactive stations in AP mode. |
| 5663 |
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested |
| 5664 |
* to work properly to suppport receiving regulatory hints from |
| 5665 |
* cellular base stations. |
| 5666 |
* @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only |
| 5667 |
* here to reserve the value for API/ABI compatibility) |
| 5668 |
* @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of |
| 5669 |
* equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station |
| 5670 |
* mode |
| 5671 |
* @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan |
| 5672 |
* @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported |
| 5673 |
* @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif |
| 5674 |
* @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting |
| 5675 |
* @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform |
| 5676 |
* OBSS scans and generate 20/40 BSS coex reports. This flag is used only |
| 5677 |
* for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. |
| 5678 |
* @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window |
| 5679 |
* setting |
| 5680 |
* @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic |
| 5681 |
* powersave |
| 5682 |
* @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state |
| 5683 |
* transitions for AP clients. Without this flag (and if the driver |
| 5684 |
* doesn't have the AP SME in the device) the driver supports adding |
| 5685 |
* stations only when they're associated and adds them in associated |
| 5686 |
* state (to later be transitioned into authorized), with this flag |
| 5687 |
* they should be added before even sending the authentication reply |
| 5688 |
* and then transitioned into authenticated, associated and authorized |
| 5689 |
* states using station flags. |
| 5690 |
* Note that even for drivers that support this, the default is to add |
| 5691 |
* stations in authenticated/associated state, so to add unauthenticated |
| 5692 |
* stations the authenticated/associated bits have to be set in the mask. |
| 5693 |
* @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits |
| 5694 |
* (HT40, VHT 80/160 MHz) if this flag is set |
| 5695 |
* @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh |
| 5696 |
* Peering Management entity which may be implemented by registering for |
| 5697 |
* beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is |
| 5698 |
* still generated by the driver. |
| 5699 |
* @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor |
| 5700 |
* interface. An active monitor interface behaves like a normal monitor |
| 5701 |
* interface, but gets added to the driver. It ensures that incoming |
| 5702 |
* unicast packets directed at the configured interface address get ACKed. |
| 5703 |
* @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic |
| 5704 |
* channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the |
| 5705 |
* lifetime of a BSS. |
| 5706 |
* @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter |
| 5707 |
* Set IE to probe requests. |
| 5708 |
* @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE |
| 5709 |
* to probe requests. |
| 5710 |
* @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period |
| 5711 |
* requests sent to it by an AP. |
| 5712 |
* @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the |
| 5713 |
* current tx power value into the TPC Report IE in the spectrum |
| 5714 |
* management TPC Report action frame, and in the Radio Measurement Link |
| 5715 |
* Measurement Report action frame. |
| 5716 |
* @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout |
| 5717 |
* estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used |
| 5718 |
* to enable dynack. |
| 5719 |
* @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial |
| 5720 |
* multiplexing powersave, ie. can turn off all but one chain |
| 5721 |
* even on HT connections that should be using more chains. |
| 5722 |
* @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial |
| 5723 |
* multiplexing powersave, ie. can turn off all but one chain |
| 5724 |
* and then wake the rest up as required after, for example, |
| 5725 |
* rts/cts handshake. |
| 5726 |
* @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM |
| 5727 |
* TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS |
| 5728 |
* command. Standard IEEE 802.11 TSPEC setup is not yet supported, it |
| 5729 |
* needs to be able to handle Block-Ack agreements and other things. |
| 5730 |
* @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring |
| 5731 |
* the vif's MAC address upon creation. |
| 5732 |
* See 'macaddr' field in the vif_params (cfg80211.h). |
| 5733 |
* @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when |
| 5734 |
* operating as a TDLS peer. |
| 5735 |
* @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a |
| 5736 |
* random MAC address during scan (if the device is unassociated); the |
| 5737 |
* %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC |
| 5738 |
* address mask/value will be used. |
| 5739 |
* @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports |
| 5740 |
* using a random MAC address for every scan iteration during scheduled |
| 5741 |
* scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may |
| 5742 |
* be set for scheduled scan and the MAC address mask/value will be used. |
| 5743 |
* @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a |
| 5744 |
* random MAC address for every scan iteration during "net detect", i.e. |
| 5745 |
* scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may |
| 5746 |
* be set for scheduled scan and the MAC address mask/value will be used. |
| 5747 |
*/ |
| 5748 |
enum nl80211_feature_flags { |
| 5749 |
NL80211_FEATURE_SK_TX_STATUS = 1 << 0, |
| 5750 |
NL80211_FEATURE_HT_IBSS = 1 << 1, |
| 5751 |
NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, |
| 5752 |
NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, |
| 5753 |
NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, |
| 5754 |
NL80211_FEATURE_SAE = 1 << 5, |
| 5755 |
NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, |
| 5756 |
NL80211_FEATURE_SCAN_FLUSH = 1 << 7, |
| 5757 |
NL80211_FEATURE_AP_SCAN = 1 << 8, |
| 5758 |
NL80211_FEATURE_VIF_TXPOWER = 1 << 9, |
| 5759 |
NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, |
| 5760 |
NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, |
| 5761 |
NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, |
| 5762 |
/* bit 13 is reserved */ |
| 5763 |
NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, |
| 5764 |
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, |
| 5765 |
NL80211_FEATURE_USERSPACE_MPM = 1 << 16, |
| 5766 |
NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, |
| 5767 |
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, |
| 5768 |
NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, |
| 5769 |
NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, |
| 5770 |
NL80211_FEATURE_QUIET = 1 << 21, |
| 5771 |
NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, |
| 5772 |
NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, |
| 5773 |
NL80211_FEATURE_STATIC_SMPS = 1 << 24, |
| 5774 |
NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, |
| 5775 |
NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, |
| 5776 |
NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, |
| 5777 |
NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, |
| 5778 |
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, |
| 5779 |
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, |
| 5780 |
NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, |
| 5781 |
}; |
| 5782 |
|
| 5783 |
/** |
| 5784 |
* enum nl80211_ext_feature_index - bit index of extended features. |
| 5785 |
* @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. |
| 5786 |
* @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can |
| 5787 |
* request to use RRM (see %NL80211_ATTR_USE_RRM) with |
| 5788 |
* %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set |
| 5789 |
* the ASSOC_REQ_USE_RRM flag in the association request even if |
| 5790 |
* NL80211_FEATURE_QUIET is not advertized. |
| 5791 |
* @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air |
| 5792 |
* sniffer which means that it can be configured to hear packets from |
| 5793 |
* certain groups which can be configured by the |
| 5794 |
* %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, |
| 5795 |
* or can be configured to follow a station by configuring the |
| 5796 |
* %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. |
| 5797 |
* @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual |
| 5798 |
* time the scan started in scan results event. The time is the TSF of |
| 5799 |
* the BSS that the interface that requested the scan is connected to |
| 5800 |
* (if available). |
| 5801 |
* @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the |
| 5802 |
* time the last beacon/probe was received. The time is the TSF of the |
| 5803 |
* BSS that the interface that requested the scan is connected to |
| 5804 |
* (if available). |
| 5805 |
* @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of |
| 5806 |
* channel dwell time. |
| 5807 |
* @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate |
| 5808 |
* configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. |
| 5809 |
* @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate |
| 5810 |
* configuration (AP/mesh) with HT rates. |
| 5811 |
* @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate |
| 5812 |
* configuration (AP/mesh) with VHT rates. |
| 5813 |
* @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup |
| 5814 |
* with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. |
| 5815 |
* @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA |
| 5816 |
* in @NL80211_CMD_FRAME while not associated. |
| 5817 |
* @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports |
| 5818 |
* randomized TA in @NL80211_CMD_FRAME while associated. |
| 5819 |
* @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan |
| 5820 |
* for reporting BSSs with better RSSI than the current connected BSS |
| 5821 |
* (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). |
| 5822 |
* @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the |
| 5823 |
* %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more |
| 5824 |
* RSSI threshold values to monitor rather than exactly one threshold. |
| 5825 |
* @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key |
| 5826 |
* authentication with %NL80211_CMD_CONNECT. |
| 5827 |
* @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way |
| 5828 |
* handshake with PSK in station mode (PSK is passed as part of the connect |
| 5829 |
* and associate commands), doing it in the host might not be supported. |
| 5830 |
* @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way |
| 5831 |
* handshake with 802.1X in station mode (will pass EAP frames to the host |
| 5832 |
* and accept the set_pmk/del_pmk commands), doing it in the host might not |
| 5833 |
* be supported. |
| 5834 |
* @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding |
| 5835 |
* the max channel attribute in the FILS request params IE with the |
| 5836 |
* actual dwell time. |
| 5837 |
* @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe |
| 5838 |
* response |
| 5839 |
* @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending |
| 5840 |
* the first probe request in each channel at rate of at least 5.5Mbps. |
| 5841 |
* @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports |
| 5842 |
* probe request tx deferral and suppression |
| 5843 |
* @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL |
| 5844 |
* value in %NL80211_ATTR_USE_MFP. |
| 5845 |
* @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. |
| 5846 |
* @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. |
| 5847 |
* @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. |
| 5848 |
* @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. |
| 5849 |
* Device or driver will do all DFS-related actions by itself, |
| 5850 |
* informing user-space about CAC progress, radar detection event, |
| 5851 |
* channel change triggered by radar detection event. |
| 5852 |
* No need to start CAC from user-space, no need to react to |
| 5853 |
* "radar detected" event. |
| 5854 |
* @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and |
| 5855 |
* receiving control port frames over nl80211 instead of the netdevice. |
| 5856 |
* @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports |
| 5857 |
* (average) ACK signal strength reporting. |
| 5858 |
* @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate |
| 5859 |
* TXQs. |
| 5860 |
* @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the |
| 5861 |
* SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. |
| 5862 |
* @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data |
| 5863 |
* except for supported rates from the probe request content if requested |
| 5864 |
* by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. |
| 5865 |
* @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine |
| 5866 |
* timing measurement responder role. |
| 5867 |
* |
| 5868 |
* @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are |
| 5869 |
* able to rekey an in-use key correctly. Userspace must not rekey PTK keys |
| 5870 |
* if this flag is not set. Ignoring this can leak clear text packets and/or |
| 5871 |
* freeze the connection. |
| 5872 |
* @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for |
| 5873 |
* Individually Addressed Frames" from IEEE802.11-2016. |
| 5874 |
* |
| 5875 |
* @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime |
| 5876 |
* fairness for transmitted packets and has enabled airtime fairness |
| 5877 |
* scheduling. |
| 5878 |
* |
| 5879 |
* @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching |
| 5880 |
* (set/del PMKSA operations) in AP mode. |
| 5881 |
* |
| 5882 |
* @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports |
| 5883 |
* filtering of sched scan results using band specific RSSI thresholds. |
| 5884 |
* |
| 5885 |
* @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power |
| 5886 |
* to a station. |
| 5887 |
* |
| 5888 |
* @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in |
| 5889 |
* station mode (SAE password is passed as part of the connect command). |
| 5890 |
* |
| 5891 |
* @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev |
| 5892 |
* with VLAN tagged frames and separate VLAN-specific netdevs added using |
| 5893 |
* vconfig similarly to the Ethernet case. |
| 5894 |
* |
| 5895 |
* @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) |
| 5896 |
* feature, which prevents bufferbloat by using the expected transmission |
| 5897 |
* time to limit the amount of data buffered in the hardware. |
| 5898 |
* |
| 5899 |
* @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection |
| 5900 |
* and can receive key configuration for BIGTK using key indexes 6 and 7. |
| 5901 |
* @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon |
| 5902 |
* protection as a client only and cannot transmit protected beacons. |
| 5903 |
* |
| 5904 |
* @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the |
| 5905 |
* forwarding of preauth frames over the control port. They are then |
| 5906 |
* handled as ordinary data frames. |
| 5907 |
* |
| 5908 |
* @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames |
| 5909 |
* |
| 5910 |
* @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations |
| 5911 |
* in IBSS mode, essentially by dropping their state. |
| 5912 |
* |
| 5913 |
* @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations |
| 5914 |
* are possible for multicast frames and those will be reported properly. |
| 5915 |
* |
| 5916 |
* @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and |
| 5917 |
* reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to |
| 5918 |
* report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be |
| 5919 |
* included in the scan request. |
| 5920 |
* |
| 5921 |
* @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver |
| 5922 |
* can report tx status for control port over nl80211 tx operations. |
| 5923 |
* |
| 5924 |
* @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating |
| 5925 |
* Channel Validation (OCV) when using driver's SME for RSNA handshakes. |
| 5926 |
* |
| 5927 |
* @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way |
| 5928 |
* handshake with PSK in AP mode (PSK is passed as part of the start AP |
| 5929 |
* command). |
| 5930 |
* |
| 5931 |
* @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication |
| 5932 |
* in AP mode (SAE password is passed as part of the start AP command). |
| 5933 |
* |
| 5934 |
* @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery |
| 5935 |
* frames transmission |
| 5936 |
* |
| 5937 |
* @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports |
| 5938 |
* unsolicited broadcast probe response transmission |
| 5939 |
* |
| 5940 |
* @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate |
| 5941 |
* configuration (AP/mesh) with HE rates. |
| 5942 |
* |
| 5943 |
* @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement |
| 5944 |
* exchange protocol. |
| 5945 |
* |
| 5946 |
* @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement |
| 5947 |
* exchange protocol. |
| 5948 |
* |
| 5949 |
* @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management |
| 5950 |
* frame protection for all management frames exchanged during the |
| 5951 |
* negotiation and range measurement procedure. |
| 5952 |
* |
| 5953 |
* @NUM_NL80211_EXT_FEATURES: number of extended features. |
| 5954 |
* @MAX_NL80211_EXT_FEATURES: highest extended feature index. |
| 5955 |
*/ |
| 5956 |
enum nl80211_ext_feature_index { |
| 5957 |
NL80211_EXT_FEATURE_VHT_IBSS, |
| 5958 |
NL80211_EXT_FEATURE_RRM, |
| 5959 |
NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, |
| 5960 |
NL80211_EXT_FEATURE_SCAN_START_TIME, |
| 5961 |
NL80211_EXT_FEATURE_BSS_PARENT_TSF, |
| 5962 |
NL80211_EXT_FEATURE_SET_SCAN_DWELL, |
| 5963 |
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, |
| 5964 |
NL80211_EXT_FEATURE_BEACON_RATE_HT, |
| 5965 |
NL80211_EXT_FEATURE_BEACON_RATE_VHT, |
| 5966 |
NL80211_EXT_FEATURE_FILS_STA, |
| 5967 |
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, |
| 5968 |
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, |
| 5969 |
NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, |
| 5970 |
NL80211_EXT_FEATURE_CQM_RSSI_LIST, |
| 5971 |
NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, |
| 5972 |
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, |
| 5973 |
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, |
| 5974 |
NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, |
| 5975 |
NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, |
| 5976 |
NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, |
| 5977 |
NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, |
| 5978 |
NL80211_EXT_FEATURE_MFP_OPTIONAL, |
| 5979 |
NL80211_EXT_FEATURE_LOW_SPAN_SCAN, |
| 5980 |
NL80211_EXT_FEATURE_LOW_POWER_SCAN, |
| 5981 |
NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, |
| 5982 |
NL80211_EXT_FEATURE_DFS_OFFLOAD, |
| 5983 |
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, |
| 5984 |
NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, |
| 5985 |
/* we renamed this - stay compatible */ |
| 5986 |
NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, |
| 5987 |
NL80211_EXT_FEATURE_TXQS, |
| 5988 |
NL80211_EXT_FEATURE_SCAN_RANDOM_SN, |
| 5989 |
NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, |
| 5990 |
NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, |
| 5991 |
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, |
| 5992 |
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, |
| 5993 |
NL80211_EXT_FEATURE_AP_PMKSA_CACHING, |
| 5994 |
NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, |
| 5995 |
NL80211_EXT_FEATURE_EXT_KEY_ID, |
| 5996 |
NL80211_EXT_FEATURE_STA_TX_PWR, |
| 5997 |
NL80211_EXT_FEATURE_SAE_OFFLOAD, |
| 5998 |
NL80211_EXT_FEATURE_VLAN_OFFLOAD, |
| 5999 |
NL80211_EXT_FEATURE_AQL, |
| 6000 |
NL80211_EXT_FEATURE_BEACON_PROTECTION, |
| 6001 |
NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, |
| 6002 |
NL80211_EXT_FEATURE_PROTECTED_TWT, |
| 6003 |
NL80211_EXT_FEATURE_DEL_IBSS_STA, |
| 6004 |
NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, |
| 6005 |
NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, |
| 6006 |
NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, |
| 6007 |
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, |
| 6008 |
NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, |
| 6009 |
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, |
| 6010 |
NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, |
| 6011 |
NL80211_EXT_FEATURE_FILS_DISCOVERY, |
| 6012 |
NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, |
| 6013 |
NL80211_EXT_FEATURE_BEACON_RATE_HE, |
| 6014 |
NL80211_EXT_FEATURE_SECURE_LTF, |
| 6015 |
NL80211_EXT_FEATURE_SECURE_RTT, |
| 6016 |
NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, |
| 6017 |
|
| 6018 |
/* add new features before the definition below */ |
| 6019 |
NUM_NL80211_EXT_FEATURES, |
| 6020 |
MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 |
| 6021 |
}; |
| 6022 |
|
| 6023 |
/** |
| 6024 |
* enum nl80211_probe_resp_offload_support_attr - optional supported |
| 6025 |
* protocols for probe-response offloading by the driver/FW. |
| 6026 |
* To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. |
| 6027 |
* Each enum value represents a bit in the bitmap of supported |
| 6028 |
* protocols. Typically a subset of probe-requests belonging to a |
| 6029 |
* supported protocol will be excluded from offload and uploaded |
| 6030 |
* to the host. |
| 6031 |
* |
| 6032 |
* @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 |
| 6033 |
* @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 |
| 6034 |
* @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P |
| 6035 |
* @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u |
| 6036 |
*/ |
| 6037 |
enum nl80211_probe_resp_offload_support_attr { |
| 6038 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, |
| 6039 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, |
| 6040 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, |
| 6041 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, |
| 6042 |
}; |
| 6043 |
|
| 6044 |
/** |
| 6045 |
* enum nl80211_connect_failed_reason - connection request failed reasons |
| 6046 |
* @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be |
| 6047 |
* handled by the AP is reached. |
| 6048 |
* @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. |
| 6049 |
*/ |
| 6050 |
enum nl80211_connect_failed_reason { |
| 6051 |
NL80211_CONN_FAIL_MAX_CLIENTS, |
| 6052 |
NL80211_CONN_FAIL_BLOCKED_CLIENT, |
| 6053 |
}; |
| 6054 |
|
| 6055 |
/** |
| 6056 |
* enum nl80211_timeout_reason - timeout reasons |
| 6057 |
* |
| 6058 |
* @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. |
| 6059 |
* @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. |
| 6060 |
* @NL80211_TIMEOUT_AUTH: Authentication timed out. |
| 6061 |
* @NL80211_TIMEOUT_ASSOC: Association timed out. |
| 6062 |
*/ |
| 6063 |
enum nl80211_timeout_reason { |
| 6064 |
NL80211_TIMEOUT_UNSPECIFIED, |
| 6065 |
NL80211_TIMEOUT_SCAN, |
| 6066 |
NL80211_TIMEOUT_AUTH, |
| 6067 |
NL80211_TIMEOUT_ASSOC, |
| 6068 |
}; |
| 6069 |
|
| 6070 |
/** |
| 6071 |
* enum nl80211_scan_flags - scan request control flags |
| 6072 |
* |
| 6073 |
* Scan request control flags are used to control the handling |
| 6074 |
* of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN |
| 6075 |
* requests. |
| 6076 |
* |
| 6077 |
* NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and |
| 6078 |
* NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only |
| 6079 |
* one of them can be used in the request. |
| 6080 |
* |
| 6081 |
* @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority |
| 6082 |
* @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning |
| 6083 |
* @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured |
| 6084 |
* as AP and the beaconing has already been configured. This attribute is |
| 6085 |
* dangerous because will destroy stations performance as a lot of frames |
| 6086 |
* will be lost while scanning off-channel, therefore it must be used only |
| 6087 |
* when really needed |
| 6088 |
* @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or |
| 6089 |
* for scheduled scan: a different one for every scan iteration). When the |
| 6090 |
* flag is set, depending on device capabilities the @NL80211_ATTR_MAC and |
| 6091 |
* @NL80211_ATTR_MAC_MASK attributes may also be given in which case only |
| 6092 |
* the masked bits will be preserved from the MAC address and the remainder |
| 6093 |
* randomised. If the attributes are not given full randomisation (46 bits, |
| 6094 |
* locally administered 1, multicast 0) is assumed. |
| 6095 |
* This flag must not be requested when the feature isn't supported, check |
| 6096 |
* the nl80211 feature flags for the device. |
| 6097 |
* @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS |
| 6098 |
* request parameters IE in the probe request |
| 6099 |
* @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses |
| 6100 |
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at |
| 6101 |
* rate of at least 5.5M. In case non OCE AP is discovered in the channel, |
| 6102 |
* only the first probe req in the channel will be sent in high rate. |
| 6103 |
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request |
| 6104 |
* tx deferral (dot11FILSProbeDelay shall be set to 15ms) |
| 6105 |
* and suppression (if it has received a broadcast Probe Response frame, |
| 6106 |
* Beacon frame or FILS Discovery frame from an AP that the STA considers |
| 6107 |
* a suitable candidate for (re-)association - suitable in terms of |
| 6108 |
* SSID and/or RSSI. |
| 6109 |
* @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to |
| 6110 |
* accomplish the scan. Thus, this flag intends the driver to perform the |
| 6111 |
* scan request with lesser span/duration. It is specific to the driver |
| 6112 |
* implementations on how this is accomplished. Scan accuracy may get |
| 6113 |
* impacted with this flag. |
| 6114 |
* @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume |
| 6115 |
* optimal possible power. Drivers can resort to their specific means to |
| 6116 |
* optimize the power. Scan accuracy may get impacted with this flag. |
| 6117 |
* @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan |
| 6118 |
* results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum |
| 6119 |
* possible scan results. This flag hints the driver to use the best |
| 6120 |
* possible scan configuration to improve the accuracy in scanning. |
| 6121 |
* Latency and power use may get impacted with this flag. |
| 6122 |
* @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe |
| 6123 |
* request frames from this scan to avoid correlation/tracking being |
| 6124 |
* possible. |
| 6125 |
* @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to |
| 6126 |
* only have supported rates and no additional capabilities (unless |
| 6127 |
* added by userspace explicitly.) |
| 6128 |
* @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with |
| 6129 |
* %NL80211_ATTR_SCAN_FREQ_KHZ. This also means |
| 6130 |
* %NL80211_ATTR_SCAN_FREQUENCIES will not be included. |
| 6131 |
* @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by |
| 6132 |
* 2.4/5 GHz APs |
| 6133 |
*/ |
| 6134 |
enum nl80211_scan_flags { |
| 6135 |
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, |
| 6136 |
NL80211_SCAN_FLAG_FLUSH = 1<<1, |
| 6137 |
NL80211_SCAN_FLAG_AP = 1<<2, |
| 6138 |
NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, |
| 6139 |
NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, |
| 6140 |
NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, |
| 6141 |
NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, |
| 6142 |
NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, |
| 6143 |
NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, |
| 6144 |
NL80211_SCAN_FLAG_LOW_POWER = 1<<9, |
| 6145 |
NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, |
| 6146 |
NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, |
| 6147 |
NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, |
| 6148 |
NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, |
| 6149 |
NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, |
| 6150 |
}; |
| 6151 |
|
| 6152 |
/** |
| 6153 |
* enum nl80211_acl_policy - access control policy |
| 6154 |
* |
| 6155 |
* Access control policy is applied on a MAC list set by |
| 6156 |
* %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to |
| 6157 |
* be used with %NL80211_ATTR_ACL_POLICY. |
| 6158 |
* |
| 6159 |
* @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are |
| 6160 |
* listed in ACL, i.e. allow all the stations which are not listed |
| 6161 |
* in ACL to authenticate. |
| 6162 |
* @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed |
| 6163 |
* in ACL, i.e. deny all the stations which are not listed in ACL. |
| 6164 |
*/ |
| 6165 |
enum nl80211_acl_policy { |
| 6166 |
NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, |
| 6167 |
NL80211_ACL_POLICY_DENY_UNLESS_LISTED, |
| 6168 |
}; |
| 6169 |
|
| 6170 |
/** |
| 6171 |
* enum nl80211_smps_mode - SMPS mode |
| 6172 |
* |
| 6173 |
* Requested SMPS mode (for AP mode) |
| 6174 |
* |
| 6175 |
* @NL80211_SMPS_OFF: SMPS off (use all antennas). |
| 6176 |
* @NL80211_SMPS_STATIC: static SMPS (use a single antenna) |
| 6177 |
* @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and |
| 6178 |
* turn on other antennas after CTS/RTS). |
| 6179 |
*/ |
| 6180 |
enum nl80211_smps_mode { |
| 6181 |
NL80211_SMPS_OFF, |
| 6182 |
NL80211_SMPS_STATIC, |
| 6183 |
NL80211_SMPS_DYNAMIC, |
| 6184 |
|
| 6185 |
__NL80211_SMPS_AFTER_LAST, |
| 6186 |
NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 |
| 6187 |
}; |
| 6188 |
|
| 6189 |
/** |
| 6190 |
* enum nl80211_radar_event - type of radar event for DFS operation |
| 6191 |
* |
| 6192 |
* Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace |
| 6193 |
* about detected radars or success of the channel available check (CAC) |
| 6194 |
* |
| 6195 |
* @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is |
| 6196 |
* now unusable. |
| 6197 |
* @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, |
| 6198 |
* the channel is now available. |
| 6199 |
* @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no |
| 6200 |
* change to the channel status. |
| 6201 |
* @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is |
| 6202 |
* over, channel becomes usable. |
| 6203 |
* @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this |
| 6204 |
* non-operating channel is expired and no longer valid. New CAC must |
| 6205 |
* be done on this channel before starting the operation. This is not |
| 6206 |
* applicable for ETSI dfs domain where pre-CAC is valid for ever. |
| 6207 |
* @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, |
| 6208 |
* should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. |
| 6209 |
*/ |
| 6210 |
enum nl80211_radar_event { |
| 6211 |
NL80211_RADAR_DETECTED, |
| 6212 |
NL80211_RADAR_CAC_FINISHED, |
| 6213 |
NL80211_RADAR_CAC_ABORTED, |
| 6214 |
NL80211_RADAR_NOP_FINISHED, |
| 6215 |
NL80211_RADAR_PRE_CAC_EXPIRED, |
| 6216 |
NL80211_RADAR_CAC_STARTED, |
| 6217 |
}; |
| 6218 |
|
| 6219 |
/** |
| 6220 |
* enum nl80211_dfs_state - DFS states for channels |
| 6221 |
* |
| 6222 |
* Channel states used by the DFS code. |
| 6223 |
* |
| 6224 |
* @NL80211_DFS_USABLE: The channel can be used, but channel availability |
| 6225 |
* check (CAC) must be performed before using it for AP or IBSS. |
| 6226 |
* @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it |
| 6227 |
* is therefore marked as not available. |
| 6228 |
* @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. |
| 6229 |
*/ |
| 6230 |
enum nl80211_dfs_state { |
| 6231 |
NL80211_DFS_USABLE, |
| 6232 |
NL80211_DFS_UNAVAILABLE, |
| 6233 |
NL80211_DFS_AVAILABLE, |
| 6234 |
}; |
| 6235 |
|
| 6236 |
/** |
| 6237 |
* enum nl80211_protocol_features - nl80211 protocol features |
| 6238 |
* @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting |
| 6239 |
* wiphy dumps (if requested by the application with the attribute |
| 6240 |
* %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the |
| 6241 |
* wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or |
| 6242 |
* %NL80211_ATTR_WDEV. |
| 6243 |
*/ |
| 6244 |
enum nl80211_protocol_features { |
| 6245 |
NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, |
| 6246 |
}; |
| 6247 |
|
| 6248 |
/** |
| 6249 |
* enum nl80211_crit_proto_id - nl80211 critical protocol identifiers |
| 6250 |
* |
| 6251 |
* @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. |
| 6252 |
* @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. |
| 6253 |
* @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. |
| 6254 |
* @NL80211_CRIT_PROTO_APIPA: APIPA protocol. |
| 6255 |
* @NUM_NL80211_CRIT_PROTO: must be kept last. |
| 6256 |
*/ |
| 6257 |
enum nl80211_crit_proto_id { |
| 6258 |
NL80211_CRIT_PROTO_UNSPEC, |
| 6259 |
NL80211_CRIT_PROTO_DHCP, |
| 6260 |
NL80211_CRIT_PROTO_EAPOL, |
| 6261 |
NL80211_CRIT_PROTO_APIPA, |
| 6262 |
/* add other protocols before this one */ |
| 6263 |
NUM_NL80211_CRIT_PROTO |
| 6264 |
}; |
| 6265 |
|
| 6266 |
/* maximum duration for critical protocol measures */ |
| 6267 |
#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ |
| 6268 |
|
| 6269 |
/** |
| 6270 |
* enum nl80211_rxmgmt_flags - flags for received management frame. |
| 6271 |
* |
| 6272 |
* Used by cfg80211_rx_mgmt() |
| 6273 |
* |
| 6274 |
* @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. |
| 6275 |
* @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload |
| 6276 |
* the authentication. Exclusively defined for host drivers that |
| 6277 |
* advertises the SME functionality but would like the userspace |
| 6278 |
* to handle certain authentication algorithms (e.g. SAE). |
| 6279 |
*/ |
| 6280 |
enum nl80211_rxmgmt_flags { |
| 6281 |
NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, |
| 6282 |
NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, |
| 6283 |
}; |
| 6284 |
|
| 6285 |
/* |
| 6286 |
* If this flag is unset, the lower 24 bits are an OUI, if set |
| 6287 |
* a Linux nl80211 vendor ID is used (no such IDs are allocated |
| 6288 |
* yet, so that's not valid so far) |
| 6289 |
*/ |
| 6290 |
#define NL80211_VENDOR_ID_IS_LINUX 0x80000000 |
| 6291 |
|
| 6292 |
/** |
| 6293 |
* struct nl80211_vendor_cmd_info - vendor command data |
| 6294 |
* @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the |
| 6295 |
* value is a 24-bit OUI; if it is set then a separately allocated ID |
| 6296 |
* may be used, but no such IDs are allocated yet. New IDs should be |
| 6297 |
* added to this file when needed. |
| 6298 |
* @subcmd: sub-command ID for the command |
| 6299 |
*/ |
| 6300 |
struct nl80211_vendor_cmd_info { |
| 6301 |
__u32 vendor_id; |
| 6302 |
__u32 subcmd; |
| 6303 |
}; |
| 6304 |
|
| 6305 |
/** |
| 6306 |
* enum nl80211_tdls_peer_capability - TDLS peer flags. |
| 6307 |
* |
| 6308 |
* Used by tdls_mgmt() to determine which conditional elements need |
| 6309 |
* to be added to TDLS Setup frames. |
| 6310 |
* |
| 6311 |
* @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. |
| 6312 |
* @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. |
| 6313 |
* @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. |
| 6314 |
* @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. |
| 6315 |
*/ |
| 6316 |
enum nl80211_tdls_peer_capability { |
| 6317 |
NL80211_TDLS_PEER_HT = 1<<0, |
| 6318 |
NL80211_TDLS_PEER_VHT = 1<<1, |
| 6319 |
NL80211_TDLS_PEER_WMM = 1<<2, |
| 6320 |
NL80211_TDLS_PEER_HE = 1<<3, |
| 6321 |
}; |
| 6322 |
|
| 6323 |
/** |
| 6324 |
* enum nl80211_sched_scan_plan - scanning plan for scheduled scan |
| 6325 |
* @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved |
| 6326 |
* @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In |
| 6327 |
* seconds (u32). |
| 6328 |
* @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this |
| 6329 |
* scan plan (u32). The last scan plan must not specify this attribute |
| 6330 |
* because it will run infinitely. A value of zero is invalid as it will |
| 6331 |
* make the scan plan meaningless. |
| 6332 |
* @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number |
| 6333 |
* currently defined |
| 6334 |
* @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use |
| 6335 |
*/ |
| 6336 |
enum nl80211_sched_scan_plan { |
| 6337 |
__NL80211_SCHED_SCAN_PLAN_INVALID, |
| 6338 |
NL80211_SCHED_SCAN_PLAN_INTERVAL, |
| 6339 |
NL80211_SCHED_SCAN_PLAN_ITERATIONS, |
| 6340 |
|
| 6341 |
/* keep last */ |
| 6342 |
__NL80211_SCHED_SCAN_PLAN_AFTER_LAST, |
| 6343 |
NL80211_SCHED_SCAN_PLAN_MAX = |
| 6344 |
__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 |
| 6345 |
}; |
| 6346 |
|
| 6347 |
/** |
| 6348 |
* struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. |
| 6349 |
* |
| 6350 |
* @band: band of BSS that must match for RSSI value adjustment. The value |
| 6351 |
* of this field is according to &enum nl80211_band. |
| 6352 |
* @delta: value used to adjust the RSSI value of matching BSS in dB. |
| 6353 |
*/ |
| 6354 |
struct nl80211_bss_select_rssi_adjust { |
| 6355 |
__u8 band; |
| 6356 |
__s8 delta; |
| 6357 |
} __attribute__((packed)); |
| 6358 |
|
| 6359 |
/** |
| 6360 |
* enum nl80211_bss_select_attr - attributes for bss selection. |
| 6361 |
* |
| 6362 |
* @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. |
| 6363 |
* @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection |
| 6364 |
* is requested. |
| 6365 |
* @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS |
| 6366 |
* selection should be done such that the specified band is preferred. |
| 6367 |
* When there are multiple BSS-es in the preferred band, the driver |
| 6368 |
* shall use RSSI-based BSS selection as a second step. The value of |
| 6369 |
* this attribute is according to &enum nl80211_band (u32). |
| 6370 |
* @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for |
| 6371 |
* BSS-es in the specified band is to be adjusted before doing |
| 6372 |
* RSSI-based BSS selection. The attribute value is a packed structure |
| 6373 |
* value as specified by &struct nl80211_bss_select_rssi_adjust. |
| 6374 |
* @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. |
| 6375 |
* @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. |
| 6376 |
* |
| 6377 |
* One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT |
| 6378 |
* for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour |
| 6379 |
* which the driver shall use. |
| 6380 |
*/ |
| 6381 |
enum nl80211_bss_select_attr { |
| 6382 |
__NL80211_BSS_SELECT_ATTR_INVALID, |
| 6383 |
NL80211_BSS_SELECT_ATTR_RSSI, |
| 6384 |
NL80211_BSS_SELECT_ATTR_BAND_PREF, |
| 6385 |
NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, |
| 6386 |
|
| 6387 |
/* keep last */ |
| 6388 |
__NL80211_BSS_SELECT_ATTR_AFTER_LAST, |
| 6389 |
NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 |
| 6390 |
}; |
| 6391 |
|
| 6392 |
/** |
| 6393 |
* enum nl80211_nan_function_type - NAN function type |
| 6394 |
* |
| 6395 |
* Defines the function type of a NAN function |
| 6396 |
* |
| 6397 |
* @NL80211_NAN_FUNC_PUBLISH: function is publish |
| 6398 |
* @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe |
| 6399 |
* @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up |
| 6400 |
*/ |
| 6401 |
enum nl80211_nan_function_type { |
| 6402 |
NL80211_NAN_FUNC_PUBLISH, |
| 6403 |
NL80211_NAN_FUNC_SUBSCRIBE, |
| 6404 |
NL80211_NAN_FUNC_FOLLOW_UP, |
| 6405 |
|
| 6406 |
/* keep last */ |
| 6407 |
__NL80211_NAN_FUNC_TYPE_AFTER_LAST, |
| 6408 |
NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, |
| 6409 |
}; |
| 6410 |
|
| 6411 |
/** |
| 6412 |
* enum nl80211_nan_publish_type - NAN publish tx type |
| 6413 |
* |
| 6414 |
* Defines how to send publish Service Discovery Frames |
| 6415 |
* |
| 6416 |
* @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited |
| 6417 |
* @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited |
| 6418 |
*/ |
| 6419 |
enum nl80211_nan_publish_type { |
| 6420 |
NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, |
| 6421 |
NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, |
| 6422 |
}; |
| 6423 |
|
| 6424 |
/** |
| 6425 |
* enum nl80211_nan_func_term_reason - NAN functions termination reason |
| 6426 |
* |
| 6427 |
* Defines termination reasons of a NAN function |
| 6428 |
* |
| 6429 |
* @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user |
| 6430 |
* @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout |
| 6431 |
* @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored |
| 6432 |
*/ |
| 6433 |
enum nl80211_nan_func_term_reason { |
| 6434 |
NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, |
| 6435 |
NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, |
| 6436 |
NL80211_NAN_FUNC_TERM_REASON_ERROR, |
| 6437 |
}; |
| 6438 |
|
| 6439 |
#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 |
| 6440 |
#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff |
| 6441 |
#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff |
| 6442 |
|
| 6443 |
/** |
| 6444 |
* enum nl80211_nan_func_attributes - NAN function attributes |
| 6445 |
* @__NL80211_NAN_FUNC_INVALID: invalid |
| 6446 |
* @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). |
| 6447 |
* @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as |
| 6448 |
* specified in NAN spec. This is a binary attribute. |
| 6449 |
* @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is |
| 6450 |
* publish. Defines the transmission type for the publish Service Discovery |
| 6451 |
* Frame, see &enum nl80211_nan_publish_type. Its type is u8. |
| 6452 |
* @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited |
| 6453 |
* publish. Should the solicited publish Service Discovery Frame be sent to |
| 6454 |
* the NAN Broadcast address. This is a flag. |
| 6455 |
* @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is |
| 6456 |
* subscribe. Is the subscribe active. This is a flag. |
| 6457 |
* @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. |
| 6458 |
* The instance ID for the follow up Service Discovery Frame. This is u8. |
| 6459 |
* @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type |
| 6460 |
* is follow up. This is a u8. |
| 6461 |
* The requestor instance ID for the follow up Service Discovery Frame. |
| 6462 |
* @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the |
| 6463 |
* follow up Service Discovery Frame. This is a binary attribute. |
| 6464 |
* @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a |
| 6465 |
* close range. The range itself (RSSI) is defined by the device. |
| 6466 |
* This is a flag. |
| 6467 |
* @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should |
| 6468 |
* stay active. If not present infinite TTL is assumed. This is a u32. |
| 6469 |
* @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service |
| 6470 |
* specific info. This is a binary attribute. |
| 6471 |
* @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. |
| 6472 |
* See &enum nl80211_nan_srf_attributes. |
| 6473 |
* @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested |
| 6474 |
* attribute. It is a list of binary values. |
| 6475 |
* @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a |
| 6476 |
* nested attribute. It is a list of binary values. |
| 6477 |
* @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. |
| 6478 |
* Its type is u8 and it cannot be 0. |
| 6479 |
* @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. |
| 6480 |
* See &enum nl80211_nan_func_term_reason. |
| 6481 |
* |
| 6482 |
* @NUM_NL80211_NAN_FUNC_ATTR: internal |
| 6483 |
* @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute |
| 6484 |
*/ |
| 6485 |
enum nl80211_nan_func_attributes { |
| 6486 |
__NL80211_NAN_FUNC_INVALID, |
| 6487 |
NL80211_NAN_FUNC_TYPE, |
| 6488 |
NL80211_NAN_FUNC_SERVICE_ID, |
| 6489 |
NL80211_NAN_FUNC_PUBLISH_TYPE, |
| 6490 |
NL80211_NAN_FUNC_PUBLISH_BCAST, |
| 6491 |
NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, |
| 6492 |
NL80211_NAN_FUNC_FOLLOW_UP_ID, |
| 6493 |
NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, |
| 6494 |
NL80211_NAN_FUNC_FOLLOW_UP_DEST, |
| 6495 |
NL80211_NAN_FUNC_CLOSE_RANGE, |
| 6496 |
NL80211_NAN_FUNC_TTL, |
| 6497 |
NL80211_NAN_FUNC_SERVICE_INFO, |
| 6498 |
NL80211_NAN_FUNC_SRF, |
| 6499 |
NL80211_NAN_FUNC_RX_MATCH_FILTER, |
| 6500 |
NL80211_NAN_FUNC_TX_MATCH_FILTER, |
| 6501 |
NL80211_NAN_FUNC_INSTANCE_ID, |
| 6502 |
NL80211_NAN_FUNC_TERM_REASON, |
| 6503 |
|
| 6504 |
/* keep last */ |
| 6505 |
NUM_NL80211_NAN_FUNC_ATTR, |
| 6506 |
NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 |
| 6507 |
}; |
| 6508 |
|
| 6509 |
/** |
| 6510 |
* enum nl80211_nan_srf_attributes - NAN Service Response filter attributes |
| 6511 |
* @__NL80211_NAN_SRF_INVALID: invalid |
| 6512 |
* @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. |
| 6513 |
* This is a flag. |
| 6514 |
* @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if |
| 6515 |
* %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. |
| 6516 |
* @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if |
| 6517 |
* %NL80211_NAN_SRF_BF is present. This is a u8. |
| 6518 |
* @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if |
| 6519 |
* and only if %NL80211_NAN_SRF_BF isn't present. This is a nested |
| 6520 |
* attribute. Each nested attribute is a MAC address. |
| 6521 |
* @NUM_NL80211_NAN_SRF_ATTR: internal |
| 6522 |
* @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute |
| 6523 |
*/ |
| 6524 |
enum nl80211_nan_srf_attributes { |
| 6525 |
__NL80211_NAN_SRF_INVALID, |
| 6526 |
NL80211_NAN_SRF_INCLUDE, |
| 6527 |
NL80211_NAN_SRF_BF, |
| 6528 |
NL80211_NAN_SRF_BF_IDX, |
| 6529 |
NL80211_NAN_SRF_MAC_ADDRS, |
| 6530 |
|
| 6531 |
/* keep last */ |
| 6532 |
NUM_NL80211_NAN_SRF_ATTR, |
| 6533 |
NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, |
| 6534 |
}; |
| 6535 |
|
| 6536 |
/** |
| 6537 |
* enum nl80211_nan_match_attributes - NAN match attributes |
| 6538 |
* @__NL80211_NAN_MATCH_INVALID: invalid |
| 6539 |
* @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the |
| 6540 |
* match. This is a nested attribute. |
| 6541 |
* See &enum nl80211_nan_func_attributes. |
| 6542 |
* @NL80211_NAN_MATCH_FUNC_PEER: the peer function |
| 6543 |
* that caused the match. This is a nested attribute. |
| 6544 |
* See &enum nl80211_nan_func_attributes. |
| 6545 |
* |
| 6546 |
* @NUM_NL80211_NAN_MATCH_ATTR: internal |
| 6547 |
* @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute |
| 6548 |
*/ |
| 6549 |
enum nl80211_nan_match_attributes { |
| 6550 |
__NL80211_NAN_MATCH_INVALID, |
| 6551 |
NL80211_NAN_MATCH_FUNC_LOCAL, |
| 6552 |
NL80211_NAN_MATCH_FUNC_PEER, |
| 6553 |
|
| 6554 |
/* keep last */ |
| 6555 |
NUM_NL80211_NAN_MATCH_ATTR, |
| 6556 |
NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 |
| 6557 |
}; |
| 6558 |
|
| 6559 |
/** |
| 6560 |
* nl80211_external_auth_action - Action to perform with external |
| 6561 |
* authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. |
| 6562 |
* @NL80211_EXTERNAL_AUTH_START: Start the authentication. |
| 6563 |
* @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. |
| 6564 |
*/ |
| 6565 |
enum nl80211_external_auth_action { |
| 6566 |
NL80211_EXTERNAL_AUTH_START, |
| 6567 |
NL80211_EXTERNAL_AUTH_ABORT, |
| 6568 |
}; |
| 6569 |
|
| 6570 |
/** |
| 6571 |
* enum nl80211_ftm_responder_attributes - fine timing measurement |
| 6572 |
* responder attributes |
| 6573 |
* @__NL80211_FTM_RESP_ATTR_INVALID: Invalid |
| 6574 |
* @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled |
| 6575 |
* @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element |
| 6576 |
* (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), |
| 6577 |
* i.e. starting with the measurement token |
| 6578 |
* @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element |
| 6579 |
* (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), |
| 6580 |
* i.e. starting with the measurement token |
| 6581 |
* @__NL80211_FTM_RESP_ATTR_LAST: Internal |
| 6582 |
* @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. |
| 6583 |
*/ |
| 6584 |
enum nl80211_ftm_responder_attributes { |
| 6585 |
__NL80211_FTM_RESP_ATTR_INVALID, |
| 6586 |
|
| 6587 |
NL80211_FTM_RESP_ATTR_ENABLED, |
| 6588 |
NL80211_FTM_RESP_ATTR_LCI, |
| 6589 |
NL80211_FTM_RESP_ATTR_CIVICLOC, |
| 6590 |
|
| 6591 |
/* keep last */ |
| 6592 |
__NL80211_FTM_RESP_ATTR_LAST, |
| 6593 |
NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, |
| 6594 |
}; |
| 6595 |
|
| 6596 |
/* |
| 6597 |
* enum nl80211_ftm_responder_stats - FTM responder statistics |
| 6598 |
* |
| 6599 |
* These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS |
| 6600 |
* when getting FTM responder statistics. |
| 6601 |
* |
| 6602 |
* @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved |
| 6603 |
* @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames |
| 6604 |
* were ssfully answered (u32) |
| 6605 |
* @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the |
| 6606 |
* frames were successfully answered (u32) |
| 6607 |
* @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) |
| 6608 |
* @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) |
| 6609 |
* @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) |
| 6610 |
* @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an |
| 6611 |
* indication of how much time the responder was busy (u64, msec) |
| 6612 |
* @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - |
| 6613 |
* triggers from initiators that didn't finish successfully the negotiation |
| 6614 |
* phase with the responder (u32) |
| 6615 |
* @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests |
| 6616 |
* - initiator asks for a new scheduling although it already has scheduled |
| 6617 |
* FTM slot (u32) |
| 6618 |
* @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of |
| 6619 |
* scheduled window (u32) |
| 6620 |
* @NL80211_FTM_STATS_PAD: used for padding, ignore |
| 6621 |
* @__NL80211_TXQ_ATTR_AFTER_LAST: Internal |
| 6622 |
* @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute |
| 6623 |
*/ |
| 6624 |
enum nl80211_ftm_responder_stats { |
| 6625 |
__NL80211_FTM_STATS_INVALID, |
| 6626 |
NL80211_FTM_STATS_SUCCESS_NUM, |
| 6627 |
NL80211_FTM_STATS_PARTIAL_NUM, |
| 6628 |
NL80211_FTM_STATS_FAILED_NUM, |
| 6629 |
NL80211_FTM_STATS_ASAP_NUM, |
| 6630 |
NL80211_FTM_STATS_NON_ASAP_NUM, |
| 6631 |
NL80211_FTM_STATS_TOTAL_DURATION_MSEC, |
| 6632 |
NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, |
| 6633 |
NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, |
| 6634 |
NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, |
| 6635 |
NL80211_FTM_STATS_PAD, |
| 6636 |
|
| 6637 |
/* keep last */ |
| 6638 |
__NL80211_FTM_STATS_AFTER_LAST, |
| 6639 |
NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 |
| 6640 |
}; |
| 6641 |
|
| 6642 |
/** |
| 6643 |
* enum nl80211_preamble - frame preamble types |
| 6644 |
* @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble |
| 6645 |
* @NL80211_PREAMBLE_HT: HT preamble |
| 6646 |
* @NL80211_PREAMBLE_VHT: VHT preamble |
| 6647 |
* @NL80211_PREAMBLE_DMG: DMG preamble |
| 6648 |
* @NL80211_PREAMBLE_HE: HE preamble |
| 6649 |
*/ |
| 6650 |
enum nl80211_preamble { |
| 6651 |
NL80211_PREAMBLE_LEGACY, |
| 6652 |
NL80211_PREAMBLE_HT, |
| 6653 |
NL80211_PREAMBLE_VHT, |
| 6654 |
NL80211_PREAMBLE_DMG, |
| 6655 |
NL80211_PREAMBLE_HE, |
| 6656 |
}; |
| 6657 |
|
| 6658 |
/** |
| 6659 |
* enum nl80211_peer_measurement_type - peer measurement types |
| 6660 |
* @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use |
| 6661 |
* these numbers also for attributes |
| 6662 |
* |
| 6663 |
* @NL80211_PMSR_TYPE_FTM: flight time measurement |
| 6664 |
* |
| 6665 |
* @NUM_NL80211_PMSR_TYPES: internal |
| 6666 |
* @NL80211_PMSR_TYPE_MAX: highest type number |
| 6667 |
*/ |
| 6668 |
enum nl80211_peer_measurement_type { |
| 6669 |
NL80211_PMSR_TYPE_INVALID, |
| 6670 |
|
| 6671 |
NL80211_PMSR_TYPE_FTM, |
| 6672 |
|
| 6673 |
NUM_NL80211_PMSR_TYPES, |
| 6674 |
NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 |
| 6675 |
}; |
| 6676 |
|
| 6677 |
/** |
| 6678 |
* enum nl80211_peer_measurement_status - peer measurement status |
| 6679 |
* @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully |
| 6680 |
* @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused |
| 6681 |
* @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out |
| 6682 |
* @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent |
| 6683 |
* reason may be available in the response data |
| 6684 |
*/ |
| 6685 |
enum nl80211_peer_measurement_status { |
| 6686 |
NL80211_PMSR_STATUS_SUCCESS, |
| 6687 |
NL80211_PMSR_STATUS_REFUSED, |
| 6688 |
NL80211_PMSR_STATUS_TIMEOUT, |
| 6689 |
NL80211_PMSR_STATUS_FAILURE, |
| 6690 |
}; |
| 6691 |
|
| 6692 |
/** |
| 6693 |
* enum nl80211_peer_measurement_req - peer measurement request attributes |
| 6694 |
* @__NL80211_PMSR_REQ_ATTR_INVALID: invalid |
| 6695 |
* |
| 6696 |
* @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement |
| 6697 |
* type-specific request data inside. The attributes used are from the |
| 6698 |
* enums named nl80211_peer_measurement_<type>_req. |
| 6699 |
* @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported |
| 6700 |
* (flag attribute) |
| 6701 |
* |
| 6702 |
* @NUM_NL80211_PMSR_REQ_ATTRS: internal |
| 6703 |
* @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number |
| 6704 |
*/ |
| 6705 |
enum nl80211_peer_measurement_req { |
| 6706 |
__NL80211_PMSR_REQ_ATTR_INVALID, |
| 6707 |
|
| 6708 |
NL80211_PMSR_REQ_ATTR_DATA, |
| 6709 |
NL80211_PMSR_REQ_ATTR_GET_AP_TSF, |
| 6710 |
|
| 6711 |
/* keep last */ |
| 6712 |
NUM_NL80211_PMSR_REQ_ATTRS, |
| 6713 |
NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 |
| 6714 |
}; |
| 6715 |
|
| 6716 |
/** |
| 6717 |
* enum nl80211_peer_measurement_resp - peer measurement response attributes |
| 6718 |
* @__NL80211_PMSR_RESP_ATTR_INVALID: invalid |
| 6719 |
* |
| 6720 |
* @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement |
| 6721 |
* type-specific results inside. The attributes used are from the enums |
| 6722 |
* named nl80211_peer_measurement_<type>_resp. |
| 6723 |
* @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status |
| 6724 |
* (using values from &enum nl80211_peer_measurement_status.) |
| 6725 |
* @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the |
| 6726 |
* result was measured; this value is not expected to be accurate to |
| 6727 |
* more than 20ms. (u64, nanoseconds) |
| 6728 |
* @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface |
| 6729 |
* doing the measurement is connected to when the result was measured. |
| 6730 |
* This shall be accurately reported if supported and requested |
| 6731 |
* (u64, usec) |
| 6732 |
* @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially |
| 6733 |
* (*e.g. with FTM per-burst data) this flag will be cleared on all but |
| 6734 |
* the last result; if all results are combined it's set on the single |
| 6735 |
* result. |
| 6736 |
* @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore |
| 6737 |
* |
| 6738 |
* @NUM_NL80211_PMSR_RESP_ATTRS: internal |
| 6739 |
* @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number |
| 6740 |
*/ |
| 6741 |
enum nl80211_peer_measurement_resp { |
| 6742 |
__NL80211_PMSR_RESP_ATTR_INVALID, |
| 6743 |
|
| 6744 |
NL80211_PMSR_RESP_ATTR_DATA, |
| 6745 |
NL80211_PMSR_RESP_ATTR_STATUS, |
| 6746 |
NL80211_PMSR_RESP_ATTR_HOST_TIME, |
| 6747 |
NL80211_PMSR_RESP_ATTR_AP_TSF, |
| 6748 |
NL80211_PMSR_RESP_ATTR_FINAL, |
| 6749 |
NL80211_PMSR_RESP_ATTR_PAD, |
| 6750 |
|
| 6751 |
/* keep last */ |
| 6752 |
NUM_NL80211_PMSR_RESP_ATTRS, |
| 6753 |
NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 |
| 6754 |
}; |
| 6755 |
|
| 6756 |
/** |
| 6757 |
* enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement |
| 6758 |
* @__NL80211_PMSR_PEER_ATTR_INVALID: invalid |
| 6759 |
* |
| 6760 |
* @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address |
| 6761 |
* @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level |
| 6762 |
* attributes like %NL80211_ATTR_WIPHY_FREQ etc. |
| 6763 |
* @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by |
| 6764 |
* measurement type, with attributes from the |
| 6765 |
* &enum nl80211_peer_measurement_req inside. |
| 6766 |
* @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by |
| 6767 |
* measurement type, with attributes from the |
| 6768 |
* &enum nl80211_peer_measurement_resp inside. |
| 6769 |
* |
| 6770 |
* @NUM_NL80211_PMSR_PEER_ATTRS: internal |
| 6771 |
* @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number |
| 6772 |
*/ |
| 6773 |
enum nl80211_peer_measurement_peer_attrs { |
| 6774 |
__NL80211_PMSR_PEER_ATTR_INVALID, |
| 6775 |
|
| 6776 |
NL80211_PMSR_PEER_ATTR_ADDR, |
| 6777 |
NL80211_PMSR_PEER_ATTR_CHAN, |
| 6778 |
NL80211_PMSR_PEER_ATTR_REQ, |
| 6779 |
NL80211_PMSR_PEER_ATTR_RESP, |
| 6780 |
|
| 6781 |
/* keep last */ |
| 6782 |
NUM_NL80211_PMSR_PEER_ATTRS, |
| 6783 |
NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, |
| 6784 |
}; |
| 6785 |
|
| 6786 |
/** |
| 6787 |
* enum nl80211_peer_measurement_attrs - peer measurement attributes |
| 6788 |
* @__NL80211_PMSR_ATTR_INVALID: invalid |
| 6789 |
* |
| 6790 |
* @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability |
| 6791 |
* advertisement only, indicates the maximum number of peers |
| 6792 |
* measurements can be done with in a single request |
| 6793 |
* @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability |
| 6794 |
* indicating that the connected AP's TSF can be reported in |
| 6795 |
* measurement results |
| 6796 |
* @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability |
| 6797 |
* indicating that MAC address randomization is supported. |
| 6798 |
* @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, |
| 6799 |
* this contains a nesting indexed by measurement type, and |
| 6800 |
* type-specific capabilities inside, which are from the enums |
| 6801 |
* named nl80211_peer_measurement_<type>_capa. |
| 6802 |
* @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is |
| 6803 |
* meaningless, just a list of peers to measure with, with the |
| 6804 |
* sub-attributes taken from |
| 6805 |
* &enum nl80211_peer_measurement_peer_attrs. |
| 6806 |
* |
| 6807 |
* @NUM_NL80211_PMSR_ATTR: internal |
| 6808 |
* @NL80211_PMSR_ATTR_MAX: highest attribute number |
| 6809 |
*/ |
| 6810 |
enum nl80211_peer_measurement_attrs { |
| 6811 |
__NL80211_PMSR_ATTR_INVALID, |
| 6812 |
|
| 6813 |
NL80211_PMSR_ATTR_MAX_PEERS, |
| 6814 |
NL80211_PMSR_ATTR_REPORT_AP_TSF, |
| 6815 |
NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, |
| 6816 |
NL80211_PMSR_ATTR_TYPE_CAPA, |
| 6817 |
NL80211_PMSR_ATTR_PEERS, |
| 6818 |
|
| 6819 |
/* keep last */ |
| 6820 |
NUM_NL80211_PMSR_ATTR, |
| 6821 |
NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 |
| 6822 |
}; |
| 6823 |
|
| 6824 |
/** |
| 6825 |
* enum nl80211_peer_measurement_ftm_capa - FTM capabilities |
| 6826 |
* @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid |
| 6827 |
* |
| 6828 |
* @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode |
| 6829 |
* is supported |
| 6830 |
* @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP |
| 6831 |
* mode is supported |
| 6832 |
* @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI |
| 6833 |
* data can be requested during the measurement |
| 6834 |
* @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic |
| 6835 |
* location data can be requested during the measurement |
| 6836 |
* @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits |
| 6837 |
* from &enum nl80211_preamble. |
| 6838 |
* @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from |
| 6839 |
* &enum nl80211_chan_width indicating the supported channel |
| 6840 |
* bandwidths for FTM. Note that a higher channel bandwidth may be |
| 6841 |
* configured to allow for other measurements types with different |
| 6842 |
* bandwidth requirement in the same measurement. |
| 6843 |
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating |
| 6844 |
* the maximum bursts exponent that can be used (if not present anything |
| 6845 |
* is valid) |
| 6846 |
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating |
| 6847 |
* the maximum FTMs per burst (if not present anything is valid) |
| 6848 |
* @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if |
| 6849 |
* trigger based ranging measurement is supported |
| 6850 |
* @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating |
| 6851 |
* if non trigger based ranging measurement is supported |
| 6852 |
* |
| 6853 |
* @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal |
| 6854 |
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number |
| 6855 |
*/ |
| 6856 |
enum nl80211_peer_measurement_ftm_capa { |
| 6857 |
__NL80211_PMSR_FTM_CAPA_ATTR_INVALID, |
| 6858 |
|
| 6859 |
NL80211_PMSR_FTM_CAPA_ATTR_ASAP, |
| 6860 |
NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, |
| 6861 |
NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, |
| 6862 |
NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, |
| 6863 |
NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, |
| 6864 |
NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, |
| 6865 |
NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, |
| 6866 |
NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, |
| 6867 |
NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, |
| 6868 |
NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, |
| 6869 |
|
| 6870 |
/* keep last */ |
| 6871 |
NUM_NL80211_PMSR_FTM_CAPA_ATTR, |
| 6872 |
NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 |
| 6873 |
}; |
| 6874 |
|
| 6875 |
/** |
| 6876 |
* enum nl80211_peer_measurement_ftm_req - FTM request attributes |
| 6877 |
* @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid |
| 6878 |
* |
| 6879 |
* @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) |
| 6880 |
* @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see |
| 6881 |
* &enum nl80211_preamble), optional for DMG (u32) |
| 6882 |
* @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in |
| 6883 |
* 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" |
| 6884 |
* (u8, 0-15, optional with default 15 i.e. "no preference") |
| 6885 |
* @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units |
| 6886 |
* of 100ms (u16, optional with default 0) |
| 6887 |
* @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 |
| 6888 |
* Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with |
| 6889 |
* default 15 i.e. "no preference") |
| 6890 |
* @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames |
| 6891 |
* requested per burst |
| 6892 |
* (u8, 0-31, optional with default 0 i.e. "no preference") |
| 6893 |
* @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries |
| 6894 |
* (u8, default 3) |
| 6895 |
* @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) |
| 6896 |
* @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data |
| 6897 |
* (flag) |
| 6898 |
* @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging |
| 6899 |
* measurement (flag). |
| 6900 |
* This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are |
| 6901 |
* mutually exclusive. |
| 6902 |
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor |
| 6903 |
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based |
| 6904 |
* ranging will be used. |
| 6905 |
* @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based |
| 6906 |
* ranging measurement (flag) |
| 6907 |
* This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are |
| 6908 |
* mutually exclusive. |
| 6909 |
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor |
| 6910 |
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based |
| 6911 |
* ranging will be used. |
| 6912 |
* @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only |
| 6913 |
* valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or |
| 6914 |
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. |
| 6915 |
* |
| 6916 |
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal |
| 6917 |
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number |
| 6918 |
*/ |
| 6919 |
enum nl80211_peer_measurement_ftm_req { |
| 6920 |
__NL80211_PMSR_FTM_REQ_ATTR_INVALID, |
| 6921 |
|
| 6922 |
NL80211_PMSR_FTM_REQ_ATTR_ASAP, |
| 6923 |
NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, |
| 6924 |
NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, |
| 6925 |
NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, |
| 6926 |
NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, |
| 6927 |
NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, |
| 6928 |
NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, |
| 6929 |
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, |
| 6930 |
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, |
| 6931 |
NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, |
| 6932 |
NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, |
| 6933 |
NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, |
| 6934 |
|
| 6935 |
/* keep last */ |
| 6936 |
NUM_NL80211_PMSR_FTM_REQ_ATTR, |
| 6937 |
NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 |
| 6938 |
}; |
| 6939 |
|
| 6940 |
/** |
| 6941 |
* enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons |
| 6942 |
* @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used |
| 6943 |
* @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder |
| 6944 |
* @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement |
| 6945 |
* @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is |
| 6946 |
* on a different channel, so can't measure (if we didn't know, we'd |
| 6947 |
* try and get no response) |
| 6948 |
* @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM |
| 6949 |
* @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps |
| 6950 |
* received |
| 6951 |
* @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry |
| 6952 |
* later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) |
| 6953 |
* @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed |
| 6954 |
* by the peer and are no longer supported |
| 6955 |
*/ |
| 6956 |
enum nl80211_peer_measurement_ftm_failure_reasons { |
| 6957 |
NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, |
| 6958 |
NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, |
| 6959 |
NL80211_PMSR_FTM_FAILURE_REJECTED, |
| 6960 |
NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, |
| 6961 |
NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, |
| 6962 |
NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, |
| 6963 |
NL80211_PMSR_FTM_FAILURE_PEER_BUSY, |
| 6964 |
NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, |
| 6965 |
}; |
| 6966 |
|
| 6967 |
/** |
| 6968 |
* enum nl80211_peer_measurement_ftm_resp - FTM response attributes |
| 6969 |
* @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid |
| 6970 |
* |
| 6971 |
* @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason |
| 6972 |
* (u32, optional) |
| 6973 |
* @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported |
| 6974 |
* as separate results then it will be the burst index 0...(N-1) and |
| 6975 |
* the top level will indicate partial results (u32) |
| 6976 |
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames |
| 6977 |
* transmitted (u32, optional) |
| 6978 |
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames |
| 6979 |
* that were acknowleged (u32, optional) |
| 6980 |
* @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the |
| 6981 |
* busy peer (u32, seconds) |
| 6982 |
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent |
| 6983 |
* used by the responder (similar to request, u8) |
| 6984 |
* @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by |
| 6985 |
* the responder (similar to request, u8) |
| 6986 |
* @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used |
| 6987 |
* by the responder (similar to request, u8) |
| 6988 |
* @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action |
| 6989 |
* frames (optional, s32, 1/2 dBm) |
| 6990 |
* @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action |
| 6991 |
* frames (optional, s32, 1/2 dBm) |
| 6992 |
* @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the |
| 6993 |
* FTM action frame (optional, nested, using &enum nl80211_rate_info |
| 6994 |
* attributes) |
| 6995 |
* @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM |
| 6996 |
* action frame (optional, nested, using &enum nl80211_rate_info attrs) |
| 6997 |
* @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional |
| 6998 |
* but one of RTT/DIST must be present) |
| 6999 |
* @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that |
| 7000 |
* standard deviation is the square root of variance, optional) |
| 7001 |
* @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, |
| 7002 |
* optional) |
| 7003 |
* @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional |
| 7004 |
* but one of RTT/DIST must be present) |
| 7005 |
* @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note |
| 7006 |
* that standard deviation is the square root of variance, optional) |
| 7007 |
* @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) |
| 7008 |
* @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); |
| 7009 |
* this is the contents of the Measurement Report Element (802.11-2016 |
| 7010 |
* 9.4.2.22.1) starting with the Measurement Token, with Measurement |
| 7011 |
* Type 8. |
| 7012 |
* @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer |
| 7013 |
* (binary, optional); |
| 7014 |
* this is the contents of the Measurement Report Element (802.11-2016 |
| 7015 |
* 9.4.2.22.1) starting with the Measurement Token, with Measurement |
| 7016 |
* Type 11. |
| 7017 |
* @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only |
| 7018 |
* |
| 7019 |
* @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal |
| 7020 |
* @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number |
| 7021 |
*/ |
| 7022 |
enum nl80211_peer_measurement_ftm_resp { |
| 7023 |
__NL80211_PMSR_FTM_RESP_ATTR_INVALID, |
| 7024 |
|
| 7025 |
NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, |
| 7026 |
NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, |
| 7027 |
NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, |
| 7028 |
NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, |
| 7029 |
NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, |
| 7030 |
NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, |
| 7031 |
NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, |
| 7032 |
NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, |
| 7033 |
NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, |
| 7034 |
NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, |
| 7035 |
NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, |
| 7036 |
NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, |
| 7037 |
NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, |
| 7038 |
NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, |
| 7039 |
NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, |
| 7040 |
NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, |
| 7041 |
NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, |
| 7042 |
NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, |
| 7043 |
NL80211_PMSR_FTM_RESP_ATTR_LCI, |
| 7044 |
NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, |
| 7045 |
NL80211_PMSR_FTM_RESP_ATTR_PAD, |
| 7046 |
|
| 7047 |
/* keep last */ |
| 7048 |
NUM_NL80211_PMSR_FTM_RESP_ATTR, |
| 7049 |
NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 |
| 7050 |
}; |
| 7051 |
|
| 7052 |
/** |
| 7053 |
* enum nl80211_obss_pd_attributes - OBSS packet detection attributes |
| 7054 |
* @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid |
| 7055 |
* |
| 7056 |
* @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. |
| 7057 |
* @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. |
| 7058 |
* @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum |
| 7059 |
* tx power offset. |
| 7060 |
* @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color |
| 7061 |
* values used by members of the SRG. |
| 7062 |
* @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial |
| 7063 |
* BSSID values used by members of the SRG. |
| 7064 |
* @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. |
| 7065 |
* |
| 7066 |
* @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal |
| 7067 |
* @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. |
| 7068 |
*/ |
| 7069 |
enum nl80211_obss_pd_attributes { |
| 7070 |
__NL80211_HE_OBSS_PD_ATTR_INVALID, |
| 7071 |
|
| 7072 |
NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, |
| 7073 |
NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, |
| 7074 |
NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, |
| 7075 |
NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, |
| 7076 |
NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, |
| 7077 |
NL80211_HE_OBSS_PD_ATTR_SR_CTRL, |
| 7078 |
|
| 7079 |
/* keep last */ |
| 7080 |
__NL80211_HE_OBSS_PD_ATTR_LAST, |
| 7081 |
NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, |
| 7082 |
}; |
| 7083 |
|
| 7084 |
/** |
| 7085 |
* enum nl80211_bss_color_attributes - BSS Color attributes |
| 7086 |
* @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid |
| 7087 |
* |
| 7088 |
* @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. |
| 7089 |
* @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. |
| 7090 |
* @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. |
| 7091 |
* |
| 7092 |
* @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal |
| 7093 |
* @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. |
| 7094 |
*/ |
| 7095 |
enum nl80211_bss_color_attributes { |
| 7096 |
__NL80211_HE_BSS_COLOR_ATTR_INVALID, |
| 7097 |
|
| 7098 |
NL80211_HE_BSS_COLOR_ATTR_COLOR, |
| 7099 |
NL80211_HE_BSS_COLOR_ATTR_DISABLED, |
| 7100 |
NL80211_HE_BSS_COLOR_ATTR_PARTIAL, |
| 7101 |
|
| 7102 |
/* keep last */ |
| 7103 |
__NL80211_HE_BSS_COLOR_ATTR_LAST, |
| 7104 |
NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, |
| 7105 |
}; |
| 7106 |
|
| 7107 |
/** |
| 7108 |
* enum nl80211_iftype_akm_attributes - interface type AKM attributes |
| 7109 |
* @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid |
| 7110 |
* |
| 7111 |
* @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag |
| 7112 |
* attribute for each interface type that supports AKM suites specified in |
| 7113 |
* %NL80211_IFTYPE_AKM_ATTR_SUITES |
| 7114 |
* @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported |
| 7115 |
* AKM suites for the specified interface types. |
| 7116 |
* |
| 7117 |
* @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal |
| 7118 |
* @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. |
| 7119 |
*/ |
| 7120 |
enum nl80211_iftype_akm_attributes { |
| 7121 |
__NL80211_IFTYPE_AKM_ATTR_INVALID, |
| 7122 |
|
| 7123 |
NL80211_IFTYPE_AKM_ATTR_IFTYPES, |
| 7124 |
NL80211_IFTYPE_AKM_ATTR_SUITES, |
| 7125 |
|
| 7126 |
/* keep last */ |
| 7127 |
__NL80211_IFTYPE_AKM_ATTR_LAST, |
| 7128 |
NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, |
| 7129 |
}; |
| 7130 |
|
| 7131 |
/** |
| 7132 |
* enum nl80211_fils_discovery_attributes - FILS discovery configuration |
| 7133 |
* from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. |
| 7134 |
* |
| 7135 |
* @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid |
| 7136 |
* |
| 7137 |
* @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). |
| 7138 |
* Allowed range: 0..10000 (TU = Time Unit) |
| 7139 |
* @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). |
| 7140 |
* Allowed range: 0..10000 (TU = Time Unit) |
| 7141 |
* @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action |
| 7142 |
* frame including the headers. |
| 7143 |
* |
| 7144 |
* @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal |
| 7145 |
* @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute |
| 7146 |
*/ |
| 7147 |
enum nl80211_fils_discovery_attributes { |
| 7148 |
__NL80211_FILS_DISCOVERY_ATTR_INVALID, |
| 7149 |
|
| 7150 |
NL80211_FILS_DISCOVERY_ATTR_INT_MIN, |
| 7151 |
NL80211_FILS_DISCOVERY_ATTR_INT_MAX, |
| 7152 |
NL80211_FILS_DISCOVERY_ATTR_TMPL, |
| 7153 |
|
| 7154 |
/* keep last */ |
| 7155 |
__NL80211_FILS_DISCOVERY_ATTR_LAST, |
| 7156 |
NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 |
| 7157 |
}; |
| 7158 |
|
| 7159 |
/* |
| 7160 |
* FILS discovery template minimum length with action frame headers and |
| 7161 |
* mandatory fields. |
| 7162 |
*/ |
| 7163 |
#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 |
| 7164 |
|
| 7165 |
/** |
| 7166 |
* enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe |
| 7167 |
* response configuration. Applicable only in 6GHz. |
| 7168 |
* |
| 7169 |
* @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid |
| 7170 |
* |
| 7171 |
* @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). |
| 7172 |
* Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 |
| 7173 |
* 26.17.2.3.2 (AP behavior for fast passive scanning). |
| 7174 |
* @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response |
| 7175 |
* frame template (binary). |
| 7176 |
* |
| 7177 |
* @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal |
| 7178 |
* @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute |
| 7179 |
*/ |
| 7180 |
enum nl80211_unsol_bcast_probe_resp_attributes { |
| 7181 |
__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, |
| 7182 |
|
| 7183 |
NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, |
| 7184 |
NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, |
| 7185 |
|
| 7186 |
/* keep last */ |
| 7187 |
__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, |
| 7188 |
NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = |
| 7189 |
__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 |
| 7190 |
}; |
| 7191 |
|
| 7192 |
/** |
| 7193 |
* enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE |
| 7194 |
* derivation. Applicable only when WPA3-Personal SAE authentication is |
| 7195 |
* used. |
| 7196 |
* |
| 7197 |
* @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that |
| 7198 |
* attribute is not present from userspace. |
| 7199 |
* @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only |
| 7200 |
* @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only |
| 7201 |
* @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element |
| 7202 |
* can be used. |
| 7203 |
*/ |
| 7204 |
enum nl80211_sae_pwe_mechanism { |
| 7205 |
NL80211_SAE_PWE_UNSPECIFIED, |
| 7206 |
NL80211_SAE_PWE_HUNT_AND_PECK, |
| 7207 |
NL80211_SAE_PWE_HASH_TO_ELEMENT, |
| 7208 |
NL80211_SAE_PWE_BOTH, |
| 7209 |
}; |
| 7210 |
|
| 7211 |
/** |
| 7212 |
* enum nl80211_sar_type - type of SAR specs |
| 7213 |
* |
| 7214 |
* @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit |
| 7215 |
* |
| 7216 |
*/ |
| 7217 |
enum nl80211_sar_type { |
| 7218 |
NL80211_SAR_TYPE_POWER, |
| 7219 |
|
| 7220 |
/* add new type here */ |
| 7221 |
|
| 7222 |
/* Keep last */ |
| 7223 |
NUM_NL80211_SAR_TYPE, |
| 7224 |
}; |
| 7225 |
|
| 7226 |
/** |
| 7227 |
* enum nl80211_sar_attrs - Attributes for SAR spec |
| 7228 |
* |
| 7229 |
* @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. |
| 7230 |
* |
| 7231 |
* @NL80211_SAR_ATTR_SPECS: Nested array of SAR power |
| 7232 |
* limit specifications. Each specification contains a set |
| 7233 |
* of %nl80211_sar_specs_attrs. |
| 7234 |
* |
| 7235 |
* For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER |
| 7236 |
* and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. |
| 7237 |
* |
| 7238 |
* For sar_capa dump, it contains array of |
| 7239 |
* %NL80211_SAR_ATTR_SPECS_START_FREQ |
| 7240 |
* and %NL80211_SAR_ATTR_SPECS_END_FREQ. |
| 7241 |
* |
| 7242 |
* @__NL80211_SAR_ATTR_LAST: Internal |
| 7243 |
* @NL80211_SAR_ATTR_MAX: highest sar attribute |
| 7244 |
* |
| 7245 |
* These attributes are used with %NL80211_CMD_SET_SAR_SPEC |
| 7246 |
*/ |
| 7247 |
enum nl80211_sar_attrs { |
| 7248 |
__NL80211_SAR_ATTR_INVALID, |
| 7249 |
|
| 7250 |
NL80211_SAR_ATTR_TYPE, |
| 7251 |
NL80211_SAR_ATTR_SPECS, |
| 7252 |
|
| 7253 |
__NL80211_SAR_ATTR_LAST, |
| 7254 |
NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, |
| 7255 |
}; |
| 7256 |
|
| 7257 |
/** |
| 7258 |
* enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs |
| 7259 |
* |
| 7260 |
* @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual |
| 7261 |
* power limit value in units of 0.25 dBm if type is |
| 7262 |
* NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). |
| 7263 |
* 0 means userspace doesn't have SAR limitation on this associated range. |
| 7264 |
* |
| 7265 |
* @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the |
| 7266 |
* index of exported freq range table and the associated power limitation |
| 7267 |
* is applied to this range. |
| 7268 |
* |
| 7269 |
* Userspace isn't required to set all the ranges advertised by WLAN driver, |
| 7270 |
* and userspace can skip some certain ranges. These skipped ranges don't |
| 7271 |
* have SAR limitations, and they are same as setting the |
| 7272 |
* %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any |
| 7273 |
* value higher than regulatory allowed value just means SAR power |
| 7274 |
* limitation is removed, but it's required to set at least one range. |
| 7275 |
* It's not allowed to set duplicated range in one SET operation. |
| 7276 |
* |
| 7277 |
* Every SET operation overwrites previous SET operation. |
| 7278 |
* |
| 7279 |
* @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start |
| 7280 |
* frequency of this range edge when registering SAR capability to wiphy. |
| 7281 |
* It's not a channel center frequency. The unit is kHz. |
| 7282 |
* |
| 7283 |
* @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end |
| 7284 |
* frequency of this range edge when registering SAR capability to wiphy. |
| 7285 |
* It's not a channel center frequency. The unit is kHz. |
| 7286 |
* |
| 7287 |
* @__NL80211_SAR_ATTR_SPECS_LAST: Internal |
| 7288 |
* @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute |
| 7289 |
*/ |
| 7290 |
enum nl80211_sar_specs_attrs { |
| 7291 |
__NL80211_SAR_ATTR_SPECS_INVALID, |
| 7292 |
|
| 7293 |
NL80211_SAR_ATTR_SPECS_POWER, |
| 7294 |
NL80211_SAR_ATTR_SPECS_RANGE_INDEX, |
| 7295 |
NL80211_SAR_ATTR_SPECS_START_FREQ, |
| 7296 |
NL80211_SAR_ATTR_SPECS_END_FREQ, |
| 7297 |
|
| 7298 |
__NL80211_SAR_ATTR_SPECS_LAST, |
| 7299 |
NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, |
| 7300 |
}; |
| 7301 |
|
| 7302 |
#endif /* __LINUX_NL80211_H */ |