| 1 |
# Example hostapd build time configuration |
| 2 |
# |
| 3 |
# This file lists the configuration options that are used when building the |
| 4 |
# hostapd binary. All lines starting with # are ignored. Configuration option |
| 5 |
# lines must be commented out complete, if they are not to be included, i.e., |
| 6 |
# just setting VARIABLE=n is not disabling that variable. |
| 7 |
# |
| 8 |
# This file is included in Makefile, so variables like CFLAGS and LIBS can also |
| 9 |
# be modified from here. In most cass, these lines should use += in order not |
| 10 |
# to override previous values of the variables. |
| 11 |
|
| 12 |
# Driver interface for Host AP driver |
| 13 |
CONFIG_DRIVER_HOSTAP=y |
| 14 |
|
| 15 |
# Driver interface for wired authenticator |
| 16 |
#CONFIG_DRIVER_WIRED=y |
| 17 |
|
| 18 |
# Driver interface for drivers using the nl80211 kernel interface |
| 19 |
CONFIG_DRIVER_NL80211=y |
| 20 |
|
| 21 |
# QCA vendor extensions to nl80211 |
| 22 |
#CONFIG_DRIVER_NL80211_QCA=y |
| 23 |
|
| 24 |
# driver_nl80211.c requires libnl. If you are compiling it yourself |
| 25 |
# you may need to point hostapd to your version of libnl. |
| 26 |
# |
| 27 |
#CFLAGS += -I$<path to libnl include files> |
| 28 |
#LIBS += -L$<path to libnl library files> |
| 29 |
|
| 30 |
# Use libnl v2.0 (or 3.0) libraries. |
| 31 |
#CONFIG_LIBNL20=y |
| 32 |
|
| 33 |
# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) |
| 34 |
CONFIG_LIBNL32=y |
| 35 |
|
| 36 |
|
| 37 |
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) |
| 38 |
#CONFIG_DRIVER_BSD=y |
| 39 |
#CFLAGS += -I/usr/local/include |
| 40 |
#LIBS += -L/usr/local/lib |
| 41 |
#LIBS_p += -L/usr/local/lib |
| 42 |
#LIBS_c += -L/usr/local/lib |
| 43 |
|
| 44 |
# Driver interface for no driver (e.g., RADIUS server only) |
| 45 |
#CONFIG_DRIVER_NONE=y |
| 46 |
|
| 47 |
# WPA2/IEEE 802.11i RSN pre-authentication |
| 48 |
CONFIG_RSN_PREAUTH=y |
| 49 |
|
| 50 |
# Support Operating Channel Validation |
| 51 |
#CONFIG_OCV=y |
| 52 |
|
| 53 |
# Integrated EAP server |
| 54 |
CONFIG_EAP=y |
| 55 |
|
| 56 |
# EAP Re-authentication Protocol (ERP) in integrated EAP server |
| 57 |
CONFIG_ERP=y |
| 58 |
|
| 59 |
# EAP-MD5 for the integrated EAP server |
| 60 |
CONFIG_EAP_MD5=y |
| 61 |
|
| 62 |
# EAP-TLS for the integrated EAP server |
| 63 |
CONFIG_EAP_TLS=y |
| 64 |
|
| 65 |
# EAP-MSCHAPv2 for the integrated EAP server |
| 66 |
CONFIG_EAP_MSCHAPV2=y |
| 67 |
|
| 68 |
# EAP-PEAP for the integrated EAP server |
| 69 |
CONFIG_EAP_PEAP=y |
| 70 |
|
| 71 |
# EAP-GTC for the integrated EAP server |
| 72 |
CONFIG_EAP_GTC=y |
| 73 |
|
| 74 |
# EAP-TTLS for the integrated EAP server |
| 75 |
CONFIG_EAP_TTLS=y |
| 76 |
|
| 77 |
# EAP-SIM for the integrated EAP server |
| 78 |
#CONFIG_EAP_SIM=y |
| 79 |
|
| 80 |
# EAP-AKA for the integrated EAP server |
| 81 |
#CONFIG_EAP_AKA=y |
| 82 |
|
| 83 |
# EAP-AKA' for the integrated EAP server |
| 84 |
# This requires CONFIG_EAP_AKA to be enabled, too. |
| 85 |
#CONFIG_EAP_AKA_PRIME=y |
| 86 |
|
| 87 |
# EAP-PAX for the integrated EAP server |
| 88 |
#CONFIG_EAP_PAX=y |
| 89 |
|
| 90 |
# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) |
| 91 |
#CONFIG_EAP_PSK=y |
| 92 |
|
| 93 |
# EAP-pwd for the integrated EAP server (secure authentication with a password) |
| 94 |
#CONFIG_EAP_PWD=y |
| 95 |
|
| 96 |
# EAP-SAKE for the integrated EAP server |
| 97 |
#CONFIG_EAP_SAKE=y |
| 98 |
|
| 99 |
# EAP-GPSK for the integrated EAP server |
| 100 |
#CONFIG_EAP_GPSK=y |
| 101 |
# Include support for optional SHA256 cipher suite in EAP-GPSK |
| 102 |
#CONFIG_EAP_GPSK_SHA256=y |
| 103 |
|
| 104 |
# EAP-FAST for the integrated EAP server |
| 105 |
#CONFIG_EAP_FAST=y |
| 106 |
|
| 107 |
# EAP-TEAP for the integrated EAP server |
| 108 |
# Note: The current EAP-TEAP implementation is experimental and should not be |
| 109 |
# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number |
| 110 |
# of conflicting statements and missing details and the implementation has |
| 111 |
# vendor specific workarounds for those and as such, may not interoperate with |
| 112 |
# any other implementation. This should not be used for anything else than |
| 113 |
# experimentation and interoperability testing until those issues has been |
| 114 |
# resolved. |
| 115 |
#CONFIG_EAP_TEAP=y |
| 116 |
|
| 117 |
# Wi-Fi Protected Setup (WPS) |
| 118 |
#CONFIG_WPS=y |
| 119 |
# Enable UPnP support for external WPS Registrars |
| 120 |
#CONFIG_WPS_UPNP=y |
| 121 |
# Enable WPS support with NFC config method |
| 122 |
#CONFIG_WPS_NFC=y |
| 123 |
|
| 124 |
# EAP-IKEv2 |
| 125 |
#CONFIG_EAP_IKEV2=y |
| 126 |
|
| 127 |
# Trusted Network Connect (EAP-TNC) |
| 128 |
#CONFIG_EAP_TNC=y |
| 129 |
|
| 130 |
# EAP-EKE for the integrated EAP server |
| 131 |
#CONFIG_EAP_EKE=y |
| 132 |
|
| 133 |
# PKCS#12 (PFX) support (used to read private key and certificate file from |
| 134 |
# a file that usually has extension .p12 or .pfx) |
| 135 |
CONFIG_PKCS12=y |
| 136 |
|
| 137 |
# RADIUS authentication server. This provides access to the integrated EAP |
| 138 |
# server from external hosts using RADIUS. |
| 139 |
#CONFIG_RADIUS_SERVER=y |
| 140 |
|
| 141 |
# Build IPv6 support for RADIUS operations |
| 142 |
CONFIG_IPV6=y |
| 143 |
|
| 144 |
# IEEE Std 802.11r-2008 (Fast BSS Transition) |
| 145 |
#CONFIG_IEEE80211R=y |
| 146 |
|
| 147 |
# Use the hostapd's IEEE 802.11 authentication (ACL), but without |
| 148 |
# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211) |
| 149 |
#CONFIG_DRIVER_RADIUS_ACL=y |
| 150 |
|
| 151 |
# Wireless Network Management (IEEE Std 802.11v-2011) |
| 152 |
# Note: This is experimental and not complete implementation. |
| 153 |
#CONFIG_WNM=y |
| 154 |
|
| 155 |
# IEEE 802.11ac (Very High Throughput) support |
| 156 |
#CONFIG_IEEE80211AC=y |
| 157 |
|
| 158 |
# IEEE 802.11ax HE support |
| 159 |
# Note: This is experimental and work in progress. The definitions are still |
| 160 |
# subject to change and this should not be expected to interoperate with the |
| 161 |
# final IEEE 802.11ax version. |
| 162 |
#CONFIG_IEEE80211AX=y |
| 163 |
|
| 164 |
# Remove debugging code that is printing out debug messages to stdout. |
| 165 |
# This can be used to reduce the size of the hostapd considerably if debugging |
| 166 |
# code is not needed. |
| 167 |
#CONFIG_NO_STDOUT_DEBUG=y |
| 168 |
|
| 169 |
# Add support for writing debug log to a file: -f /tmp/hostapd.log |
| 170 |
# Disabled by default. |
| 171 |
#CONFIG_DEBUG_FILE=y |
| 172 |
|
| 173 |
# Send debug messages to syslog instead of stdout |
| 174 |
#CONFIG_DEBUG_SYSLOG=y |
| 175 |
|
| 176 |
# Add support for sending all debug messages (regardless of debug verbosity) |
| 177 |
# to the Linux kernel tracing facility. This helps debug the entire stack by |
| 178 |
# making it easy to record everything happening from the driver up into the |
| 179 |
# same file, e.g., using trace-cmd. |
| 180 |
#CONFIG_DEBUG_LINUX_TRACING=y |
| 181 |
|
| 182 |
# Remove support for RADIUS accounting |
| 183 |
#CONFIG_NO_ACCOUNTING=y |
| 184 |
|
| 185 |
# Remove support for RADIUS |
| 186 |
#CONFIG_NO_RADIUS=y |
| 187 |
|
| 188 |
# Remove support for VLANs |
| 189 |
#CONFIG_NO_VLAN=y |
| 190 |
|
| 191 |
# Enable support for fully dynamic VLANs. This enables hostapd to |
| 192 |
# automatically create bridge and VLAN interfaces if necessary. |
| 193 |
#CONFIG_FULL_DYNAMIC_VLAN=y |
| 194 |
|
| 195 |
# Use netlink-based kernel API for VLAN operations instead of ioctl() |
| 196 |
# Note: This requires libnl 3.1 or newer. |
| 197 |
#CONFIG_VLAN_NETLINK=y |
| 198 |
|
| 199 |
# Remove support for dumping internal state through control interface commands |
| 200 |
# This can be used to reduce binary size at the cost of disabling a debugging |
| 201 |
# option. |
| 202 |
#CONFIG_NO_DUMP_STATE=y |
| 203 |
|
| 204 |
# Enable tracing code for developer debugging |
| 205 |
# This tracks use of memory allocations and other registrations and reports |
| 206 |
# incorrect use with a backtrace of call (or allocation) location. |
| 207 |
#CONFIG_WPA_TRACE=y |
| 208 |
# For BSD, comment out these. |
| 209 |
#LIBS += -lexecinfo |
| 210 |
#LIBS_p += -lexecinfo |
| 211 |
#LIBS_c += -lexecinfo |
| 212 |
|
| 213 |
# Use libbfd to get more details for developer debugging |
| 214 |
# This enables use of libbfd to get more detailed symbols for the backtraces |
| 215 |
# generated by CONFIG_WPA_TRACE=y. |
| 216 |
#CONFIG_WPA_TRACE_BFD=y |
| 217 |
# For BSD, comment out these. |
| 218 |
#LIBS += -lbfd -liberty -lz |
| 219 |
#LIBS_p += -lbfd -liberty -lz |
| 220 |
#LIBS_c += -lbfd -liberty -lz |
| 221 |
|
| 222 |
# hostapd depends on strong random number generation being available from the |
| 223 |
# operating system. os_get_random() function is used to fetch random data when |
| 224 |
# needed, e.g., for key generation. On Linux and BSD systems, this works by |
| 225 |
# reading /dev/urandom. It should be noted that the OS entropy pool needs to be |
| 226 |
# properly initialized before hostapd is started. This is important especially |
| 227 |
# on embedded devices that do not have a hardware random number generator and |
| 228 |
# may by default start up with minimal entropy available for random number |
| 229 |
# generation. |
| 230 |
# |
| 231 |
# As a safety net, hostapd is by default trying to internally collect |
| 232 |
# additional entropy for generating random data to mix in with the data |
| 233 |
# fetched from the OS. This by itself is not considered to be very strong, but |
| 234 |
# it may help in cases where the system pool is not initialized properly. |
| 235 |
# However, it is very strongly recommended that the system pool is initialized |
| 236 |
# with enough entropy either by using hardware assisted random number |
| 237 |
# generator or by storing state over device reboots. |
| 238 |
# |
| 239 |
# hostapd can be configured to maintain its own entropy store over restarts to |
| 240 |
# enhance random number generation. This is not perfect, but it is much more |
| 241 |
# secure than using the same sequence of random numbers after every reboot. |
| 242 |
# This can be enabled with -e<entropy file> command line option. The specified |
| 243 |
# file needs to be readable and writable by hostapd. |
| 244 |
# |
| 245 |
# If the os_get_random() is known to provide strong random data (e.g., on |
| 246 |
# Linux/BSD, the board in question is known to have reliable source of random |
| 247 |
# data from /dev/urandom), the internal hostapd random pool can be disabled. |
| 248 |
# This will save some in binary size and CPU use. However, this should only be |
| 249 |
# considered for builds that are known to be used on devices that meet the |
| 250 |
# requirements described above. |
| 251 |
#CONFIG_NO_RANDOM_POOL=y |
| 252 |
|
| 253 |
# Should we attempt to use the getrandom(2) call that provides more reliable |
| 254 |
# yet secure randomness source than /dev/random on Linux 3.17 and newer. |
| 255 |
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable. |
| 256 |
#CONFIG_GETRANDOM=y |
| 257 |
|
| 258 |
# Should we use poll instead of select? Select is used by default. |
| 259 |
#CONFIG_ELOOP_POLL=y |
| 260 |
|
| 261 |
# Should we use epoll instead of select? Select is used by default. |
| 262 |
#CONFIG_ELOOP_EPOLL=y |
| 263 |
|
| 264 |
# Should we use kqueue instead of select? Select is used by default. |
| 265 |
#CONFIG_ELOOP_KQUEUE=y |
| 266 |
|
| 267 |
# Select TLS implementation |
| 268 |
# openssl = OpenSSL (default) |
| 269 |
# gnutls = GnuTLS |
| 270 |
# internal = Internal TLSv1 implementation (experimental) |
| 271 |
# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental) |
| 272 |
# none = Empty template |
| 273 |
#CONFIG_TLS=openssl |
| 274 |
|
| 275 |
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) |
| 276 |
# can be enabled to get a stronger construction of messages when block ciphers |
| 277 |
# are used. |
| 278 |
#CONFIG_TLSV11=y |
| 279 |
|
| 280 |
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) |
| 281 |
# can be enabled to enable use of stronger crypto algorithms. |
| 282 |
#CONFIG_TLSV12=y |
| 283 |
|
| 284 |
# Select which ciphers to use by default with OpenSSL if the user does not |
| 285 |
# specify them. |
| 286 |
#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW" |
| 287 |
|
| 288 |
# If CONFIG_TLS=internal is used, additional library and include paths are |
| 289 |
# needed for LibTomMath. Alternatively, an integrated, minimal version of |
| 290 |
# LibTomMath can be used. See beginning of libtommath.c for details on benefits |
| 291 |
# and drawbacks of this option. |
| 292 |
#CONFIG_INTERNAL_LIBTOMMATH=y |
| 293 |
#ifndef CONFIG_INTERNAL_LIBTOMMATH |
| 294 |
#LTM_PATH=/usr/src/libtommath-0.39 |
| 295 |
#CFLAGS += -I$(LTM_PATH) |
| 296 |
#LIBS += -L$(LTM_PATH) |
| 297 |
#LIBS_p += -L$(LTM_PATH) |
| 298 |
#endif |
| 299 |
# At the cost of about 4 kB of additional binary size, the internal LibTomMath |
| 300 |
# can be configured to include faster routines for exptmod, sqr, and div to |
| 301 |
# speed up DH and RSA calculation considerably |
| 302 |
#CONFIG_INTERNAL_LIBTOMMATH_FAST=y |
| 303 |
|
| 304 |
# Interworking (IEEE 802.11u) |
| 305 |
# This can be used to enable functionality to improve interworking with |
| 306 |
# external networks. |
| 307 |
#CONFIG_INTERWORKING=y |
| 308 |
|
| 309 |
# Hotspot 2.0 |
| 310 |
#CONFIG_HS20=y |
| 311 |
|
| 312 |
# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file |
| 313 |
#CONFIG_SQLITE=y |
| 314 |
|
| 315 |
# Enable Fast Session Transfer (FST) |
| 316 |
#CONFIG_FST=y |
| 317 |
|
| 318 |
# Enable CLI commands for FST testing |
| 319 |
#CONFIG_FST_TEST=y |
| 320 |
|
| 321 |
# Testing options |
| 322 |
# This can be used to enable some testing options (see also the example |
| 323 |
# configuration file) that are really useful only for testing clients that |
| 324 |
# connect to this hostapd. These options allow, for example, to drop a |
| 325 |
# certain percentage of probe requests or auth/(re)assoc frames. |
| 326 |
# |
| 327 |
#CONFIG_TESTING_OPTIONS=y |
| 328 |
|
| 329 |
# Automatic Channel Selection |
| 330 |
# This will allow hostapd to pick the channel automatically when channel is set |
| 331 |
# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in |
| 332 |
# similar way. |
| 333 |
# |
| 334 |
# Automatic selection is currently only done through initialization, later on |
| 335 |
# we hope to do background checks to keep us moving to more ideal channels as |
| 336 |
# time goes by. ACS is currently only supported through the nl80211 driver and |
| 337 |
# your driver must have survey dump capability that is filled by the driver |
| 338 |
# during scanning. |
| 339 |
# |
| 340 |
# You can customize the ACS survey algorithm with the hostapd.conf variable |
| 341 |
# acs_num_scans. |
| 342 |
# |
| 343 |
# Supported ACS drivers: |
| 344 |
# * ath9k |
| 345 |
# * ath5k |
| 346 |
# * ath10k |
| 347 |
# |
| 348 |
# For more details refer to: |
| 349 |
# https://wireless.wiki.kernel.org/en/users/documentation/acs |
| 350 |
# |
| 351 |
#CONFIG_ACS=y |
| 352 |
|
| 353 |
# Multiband Operation support |
| 354 |
# These extensions facilitate efficient use of multiple frequency bands |
| 355 |
# available to the AP and the devices that may associate with it. |
| 356 |
#CONFIG_MBO=y |
| 357 |
|
| 358 |
# Client Taxonomy |
| 359 |
# Has the AP retain the Probe Request and (Re)Association Request frames from |
| 360 |
# a client, from which a signature can be produced which can identify the model |
| 361 |
# of client device like "Nexus 6P" or "iPhone 5s". |
| 362 |
#CONFIG_TAXONOMY=y |
| 363 |
|
| 364 |
# Fast Initial Link Setup (FILS) (IEEE 802.11ai) |
| 365 |
#CONFIG_FILS=y |
| 366 |
# FILS shared key authentication with PFS |
| 367 |
#CONFIG_FILS_SK_PFS=y |
| 368 |
|
| 369 |
# Include internal line edit mode in hostapd_cli. This can be used to provide |
| 370 |
# limited command line editing and history support. |
| 371 |
#CONFIG_WPA_CLI_EDIT=y |
| 372 |
|
| 373 |
# Opportunistic Wireless Encryption (OWE) |
| 374 |
# Experimental implementation of draft-harkins-owe-07.txt |
| 375 |
#CONFIG_OWE=y |
| 376 |
|
| 377 |
# Airtime policy support |
| 378 |
#CONFIG_AIRTIME_POLICY=y |
| 379 |
|
| 380 |
# Override default value for the wpa_disable_eapol_key_retries configuration |
| 381 |
# parameter. See that parameter in hostapd.conf for more details. |
| 382 |
#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1 |
| 383 |
|
| 384 |
# Wired equivalent privacy (WEP) |
| 385 |
# WEP is an obsolete cryptographic data confidentiality algorithm that is not |
| 386 |
# considered secure. It should not be used for anything anymore. The |
| 387 |
# functionality needed to use WEP is available in the current hostapd |
| 388 |
# release under this optional build parameter. This functionality is subject to |
| 389 |
# be completely removed in a future release. |
| 390 |
#CONFIG_WEP=y |
| 391 |
|
| 392 |
# Remove all TKIP functionality |
| 393 |
# TKIP is an old cryptographic data confidentiality algorithm that is not |
| 394 |
# considered secure. It should not be used anymore. For now, the default hostapd |
| 395 |
# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but |
| 396 |
# that functionality is subject to be removed in the future. |
| 397 |
#CONFIG_NO_TKIP=y |
| 398 |
|
| 399 |
# Pre-Association Security Negotiation (PASN) |
| 400 |
# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol |
| 401 |
# design is still subject to change. As such, this should not yet be enabled in |
| 402 |
# production use. |
| 403 |
# This requires CONFIG_IEEE80211W=y to be enabled, too. |
| 404 |
#CONFIG_PASN=y |
| 405 |
|
| 406 |
# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect) |
| 407 |
CONFIG_DPP=y |
| 408 |
# DPP version 2 support |
| 409 |
CONFIG_DPP2=y |
| 410 |
# DPP version 3 support (experimental and still changing; do not enable for |
| 411 |
# production use) |
| 412 |
#CONFIG_DPP3=y |