Debian Codegraph @

src/config/wireplumber.conf.d.examples/alsa.conf

raw
1 ## The WirePlumber ALSA configuration
2
3 wireplumber.settings = {
4 ## The priority for device reservation
5 # monitor.alsa.reserve-priority = -20
6
7 ## The application name for device reservation
8 # monitor.alsa.reserve-application-name = WirePlumber
9 }
10
11 monitor.alsa.properties = {
12 ## The properties used when constructing the 'api.alsa.enum.udev' plugin
13 }
14
15 monitor.alsa-midi.properties = {
16 ## MIDI bridge node properties
17
18 ## Name set for the node with ALSA MIDI ports
19 # node.name = "Midi-Bridge"
20
21 ## Removes longname/number from MIDI port names
22 # api.alsa.disable-longname = false
23 }
24
25 monitor.alsa.rules = [
26 ## The list of monitor rules
27
28 ## This rule example allows changing properties on all ALSA devices.
29 # {
30 # matches = [
31 # {
32 # ## This matches all cards.
33 # device.name = "~alsa_card.*"
34 # }
35 # ]
36 # actions = {
37 # update-props = {
38 # ## Use ALSA-Card-Profile devices. They use UCM or the profile
39 # ## configuration to configure the device and mixer settings.
40 # api.alsa.use-acp = true
41 #
42 # ## Use UCM instead of ACP when available.
43 # ## Depends on api.alsa.use-acp being enabled as well
44 # api.alsa.use-ucm = true
45 #
46 # ## Don't use the hardware mixer for volume control. It
47 # ## will only use software volume. The mixer is still used
48 # ## to mute unused paths based on the selected port.
49 # api.alsa.soft-mixer = false
50 #
51 # ## Ignore decibel settings of the driver. Can be used to
52 # ## work around buggy drivers that report wrong values.
53 # api.alsa.ignore-dB = false
54 #
55 # ## The profile set to use for the device. Usually this is
56 # ## "default.conf" but can be changed with a udev rule or here.
57 # device.profile-set = "profileset-name"
58 #
59 # ## The default active profile. Is by default set to "Off".
60 # device.profile = "default profile name"
61 #
62 # ## Other properties can be set here.
63 # device.nick = "My Device"
64 #
65 # ## Whether to disable the device or not
66 # device.disabled = false
67 # }
68 # }
69 # }
70
71 ## This rule example allows changing properties on all ALSA nodes.
72 # {
73 # matches = [
74 # {
75 # ## Matches all sources.
76 # node.name = "~alsa_input.*"
77 # }
78 # {
79 # ## Matches all sinks.
80 # node.name = "~alsa_output.*"
81 # }
82 # ]
83 # actions = {
84 # update-props = {
85 # node.nick = "My Node"
86 # node.description = "My Node Description"
87 # priority.driver = 100
88 # priority.session = 100
89 # node.pause-on-idle = false
90 # monitor.channel-volumes = false
91 # resample.quality = 4
92 # resample.disable = false
93 # channelmix.normalize = false
94 # channelmix.mix-lfe = false
95 # channelmix.upmix = true
96 #
97 # ## only "psd", "none" or "simple" values are accepted
98 # channelmix.upmix-method = "psd"
99 #
100 # channelmix.lfe-cutoff = 150
101 # channelmix.fc-cutoff = 12000
102 # channelmix.rear-delay = 12.0
103 # channelmix.stereo-widen = 0.0
104 # channelmix.hilbert-taps = 0
105 # channelmix.disable = false
106 # dither.noise = 0
107 # dither.method = "none"
108 # audio.channels = 2
109 # audio.format = "S16LE"
110 # audio.rate = 44100
111 # audio.allowed-rates = [32000, 96000]
112 # audio.position = [FL, FR]
113 # api.alsa.period-size = 1024
114 # api.alsa.period-num = 2
115 # api.alsa.headroom = 0
116 # api.alsa.start-delay = 0
117 # api.alsa.disable-mmap = false
118 # api.alsa.disable-batch = false
119 # api.alsa.use-chmap = false
120 # api.alsa.multirate = true
121 # latency.internal.rate = 0
122 # latency.internal.ns = 0
123 # clock.name = "api.alsa.0"
124 #
125 # ## 0 disables suspend
126 # session.suspend-timeout-seconds = 5
127 # node.disabled = false
128 # }
129 # }
130 # }
131 ]