Debian Codegraph @

libfdisk/src/alignment.c

raw
1
2 #ifdef HAVE_LIBBLKID
3 #include <blkid.h>
4 #endif
5 #include "blkdev.h"
6
7 #include "fdiskP.h"
8
9 /**
10 * SECTION: alignment
11 * @title: Alignment
12 * @short_description: functions to align partitions and work with disk topology and geometry
13 *
14 * The libfdisk aligns the end of the partitions to make it possible to align
15 * the next partition to the "grain" (see fdisk_get_grain_size()). The grain is
16 * usually 1MiB (or more for devices where optimal I/O is greater than 1MiB).
17 *
18 * It means that the library does not align strictly to physical sector size
19 * (or minimal or optimal I/O), but it uses greater granularity. It makes
20 * partition tables more portable. If you copy disk layout from 512-sector to
21 * 4K-sector device, all partitions are still aligned to physical sectors.
22 *
23 * This unified concept also makes partition tables more user friendly, all
24 * tables look same, LBA of the first partition is 2048 sectors everywhere, etc.
25 *
26 * It's recommended to not change any alignment or device properties. All is
27 * initialized by default by fdisk_assign_device().
28 *
29 * Note that terminology used by libfdisk is:
30 * - device properties: I/O limits (topology), geometry, sector size, ...
31 * - alignment: first, last LBA, grain, ...
32 *
33 * The alignment setting may be modified by disk label driver.
34 */
35
36 /*
37 * Alignment according to logical granularity (usually 1MiB)
38 */
39 static int lba_is_aligned(struct fdisk_context *cxt, uintmax_t lba)
40 {
41 unsigned long granularity = max(cxt->phy_sector_size, cxt->min_io_size);
42 uintmax_t offset;
43
44 if (cxt->grain > granularity)
45 granularity = cxt->grain;
46
47 offset = (lba * cxt->sector_size) % granularity;
48
49 return !((granularity + cxt->alignment_offset - offset) % granularity);
50 }
51
52 /*
53 * Alignment according to physical device topology (usually minimal i/o size)
54 */
55 static int lba_is_phy_aligned(struct fdisk_context *cxt, fdisk_sector_t lba)
56 {
57 unsigned long granularity = max(cxt->phy_sector_size, cxt->min_io_size);
58 uintmax_t offset = (lba * cxt->sector_size) % granularity;
59
60 return !((granularity + cxt->alignment_offset - offset) % granularity);
61 }
62
63 /**
64 * fdisk_align_lba:
65 * @cxt: context
66 * @lba: address to align
67 * @direction: FDISK_ALIGN_{UP,DOWN,NEAREST}
68 *
69 * This function aligns @lba to the "grain" (see fdisk_get_grain_size()). If the
70 * device uses alignment offset then the result is moved according the offset
71 * to be on the physical boundary.
72 *
73 * Returns: alignment LBA.
74 */
75 fdisk_sector_t fdisk_align_lba(struct fdisk_context *cxt, fdisk_sector_t lba, int direction)
76 {
77 fdisk_sector_t res;
78
79 if (lba_is_aligned(cxt, lba))
80 res = lba;
81 else {
82 fdisk_sector_t sects_in_phy = cxt->grain / cxt->sector_size;
83
84 if (lba < cxt->first_lba)
85 res = cxt->first_lba;
86
87 else if (direction == FDISK_ALIGN_UP)
88 res = ((lba + sects_in_phy) / sects_in_phy) * sects_in_phy;
89
90 else if (direction == FDISK_ALIGN_DOWN)
91 res = (lba / sects_in_phy) * sects_in_phy;
92
93 else /* FDISK_ALIGN_NEAREST */
94 res = ((lba + sects_in_phy / 2) / sects_in_phy) * sects_in_phy;
95
96 if (cxt->alignment_offset && !lba_is_aligned(cxt, res) &&
97 res > cxt->alignment_offset / cxt->sector_size) {
98 /*
99 * apply alignment_offset
100 *
101 * On disk with alignment compensation physical blocks starts
102 * at LBA < 0 (usually LBA -1). It means we have to move LBA
103 * according the offset to be on the physical boundary.
104 */
105 /* fprintf(stderr, "LBA: %llu apply alignment_offset\n", res); */
106 res -= (max(cxt->phy_sector_size, cxt->min_io_size) -
107 cxt->alignment_offset) / cxt->sector_size;
108
109 if (direction == FDISK_ALIGN_UP && res < lba)
110 res += sects_in_phy;
111 }
112 }
113 /*
114 if (lba != res)
115 DBG(CXT, ul_debugobj(cxt, "LBA %12ju aligned-%s %12ju [grain=%lus]",
116 (uintmax_t) lba,
117 direction == FDISK_ALIGN_UP ? "up " :
118 direction == FDISK_ALIGN_DOWN ? "down" : "near",
119 (uintmax_t) res,
120 cxt->grain / cxt->sector_size));
121 else
122 DBG(CXT, ul_debugobj(cxt, "LBA %12ju already aligned", (uintmax_t)lba));
123 */
124 return res;
125 }
126
127 /**
128 * fdisk_align_lba_in_range:
129 * @cxt: context
130 * @lba: LBA
131 * @start: range start
132 * @stop: range stop
133 *
134 * Align @lba, the result has to be between @start and @stop
135 *
136 * Returns: aligned LBA
137 */
138 fdisk_sector_t fdisk_align_lba_in_range(struct fdisk_context *cxt,
139 fdisk_sector_t lba, fdisk_sector_t start, fdisk_sector_t stop)
140 {
141 fdisk_sector_t res;
142
143 /*DBG(CXT, ul_debugobj(cxt, "LBA: align in range <%ju..%ju>", (uintmax_t) start, (uintmax_t) stop));*/
144
145 if (start + (cxt->grain / cxt->sector_size) <= stop) {
146 start = fdisk_align_lba(cxt, start, FDISK_ALIGN_UP);
147 stop = fdisk_align_lba(cxt, stop, FDISK_ALIGN_DOWN);
148 }
149
150 if (start + (cxt->grain / cxt->sector_size) > stop) {
151 DBG(CXT, ul_debugobj(cxt, "LBA: area smaller than grain, don't align"));
152 res = lba;
153 goto done;
154 }
155
156 lba = fdisk_align_lba(cxt, lba, FDISK_ALIGN_NEAREST);
157
158 if (lba < start)
159 res = start;
160 else if (lba > stop)
161 res = stop;
162 else
163 res = lba;
164 done:
165 DBG(CXT, ul_debugobj(cxt, "%ju in range <%ju..%ju> aligned to %ju",
166 (uintmax_t) lba,
167 (uintmax_t) start,
168 (uintmax_t) stop,
169 (uintmax_t) res));
170 return res;
171 }
172
173 /**
174 * fdisk_lba_is_phy_aligned:
175 * @cxt: context
176 * @lba: LBA to check
177 *
178 * Check if the @lba is aligned to physical sector boundary.
179 *
180 * Returns: 1 if aligned.
181 */
182 int fdisk_lba_is_phy_aligned(struct fdisk_context *cxt, fdisk_sector_t lba)
183 {
184 return lba_is_phy_aligned(cxt, lba);
185 }
186
187 static unsigned long get_sector_size(struct fdisk_context *cxt)
188 {
189 int sect_sz;
190
191 if (!fdisk_is_regfile(cxt) &&
192 !blkdev_get_sector_size(cxt->dev_fd, &sect_sz))
193 return (unsigned long) sect_sz;
194
195 return DEFAULT_SECTOR_SIZE;
196 }
197
198 static void recount_geometry(struct fdisk_context *cxt)
199 {
200 if (!cxt->geom.heads)
201 cxt->geom.heads = 255;
202 if (!cxt->geom.sectors)
203 cxt->geom.sectors = 63;
204
205 cxt->geom.cylinders = cxt->total_sectors /
206 (cxt->geom.heads * cxt->geom.sectors);
207 }
208
209 /**
210 * fdisk_override_geometry:
211 * @cxt: fdisk context
212 * @cylinders: user specified cylinders
213 * @heads: user specified heads
214 * @sectors: user specified sectors
215 *
216 * Overrides auto-discovery. The function fdisk_reset_device_properties()
217 * restores the original setting.
218 *
219 * The difference between fdisk_override_geometry() and fdisk_save_user_geometry()
220 * is that saved user geometry is persistent setting and it's applied always
221 * when device is assigned to the context or device properties are reset.
222 *
223 * Returns: 0 on success, < 0 on error.
224 */
225 int fdisk_override_geometry(struct fdisk_context *cxt,
226 unsigned int cylinders,
227 unsigned int heads,
228 unsigned int sectors)
229 {
230 int rc = 0;
231
232 if (!cxt)
233 return -EINVAL;
234 if (heads)
235 cxt->geom.heads = heads;
236 if (sectors)
237 cxt->geom.sectors = sectors;
238
239 if (cylinders)
240 cxt->geom.cylinders = cylinders;
241 else
242 recount_geometry(cxt);
243
244 rc = fdisk_reset_alignment(cxt);
245
246 DBG(CXT, ul_debugobj(cxt, "override C/H/S: %u/%u/%u [rc=%d]",
247 (unsigned) cxt->geom.cylinders,
248 (unsigned) cxt->geom.heads,
249 (unsigned) cxt->geom.sectors,
250 rc));
251
252 return rc;
253 }
254
255 /**
256 * fdisk_save_user_geometry:
257 * @cxt: context
258 * @cylinders: C
259 * @heads: H
260 * @sectors: S
261 *
262 * Save user defined geometry to use it for partitioning.
263 *
264 * The user properties are applied by fdisk_assign_device() or
265 * fdisk_reset_device_properties().
266
267 * Returns: <0 on error, 0 on success.
268 */
269 int fdisk_save_user_geometry(struct fdisk_context *cxt,
270 unsigned int cylinders,
271 unsigned int heads,
272 unsigned int sectors)
273 {
274 if (!cxt)
275 return -EINVAL;
276
277 if (heads)
278 cxt->user_geom.heads = heads > 256 ? 0 : heads;
279 if (sectors)
280 cxt->user_geom.sectors = sectors >= 64 ? 0 : sectors;
281 if (cylinders)
282 cxt->user_geom.cylinders = cylinders;
283
284 DBG(CXT, ul_debugobj(cxt, "user C/H/S: %u/%u/%u",
285 (unsigned) cxt->user_geom.cylinders,
286 (unsigned) cxt->user_geom.heads,
287 (unsigned) cxt->user_geom.sectors));
288
289 return 0;
290 }
291
292 /**
293 * fdisk_save_user_sector_size:
294 * @cxt: context
295 * @phy: physical sector size
296 * @log: logical sector size
297 *
298 * Save user defined sector sizes to use it for partitioning.
299 *
300 * The user properties are applied by fdisk_assign_device() or
301 * fdisk_reset_device_properties().
302 *
303 * Returns: <0 on error, 0 on success.
304 */
305 int fdisk_save_user_sector_size(struct fdisk_context *cxt,
306 unsigned int phy,
307 unsigned int log)
308 {
309 if (!cxt)
310 return -EINVAL;
311
312 DBG(CXT, ul_debugobj(cxt, "user phy/log sector size: %u/%u", phy, log));
313
314 cxt->user_pyh_sector = phy;
315 cxt->user_log_sector = log;
316
317 return 0;
318 }
319
320 /**
321 * fdisk_save_user_grain:
322 * @cxt: context
323 * @grain: size in bytes (>= 512, multiple of 512)
324 *
325 * Save user define grain size. The size is used to align partitions.
326 *
327 * The default is 1MiB (or optimal I/O size if greater than 1MiB). It's strongly
328 * recommended to use the default.
329 *
330 * The smallest possible granularity for partitioning is physical sector size
331 * (or minimal I/O size; the bigger number win). If the user's @grain size is
332 * too small then the smallest possible granularity is used. It means
333 * fdisk_save_user_grain(cxt, 512) forces libfdisk to use grain as small as
334 * possible.
335 *
336 * The setting is applied by fdisk_assign_device() or
337 * fdisk_reset_device_properties().
338 *
339 * Returns: <0 on error, 0 on success.
340 */
341 int fdisk_save_user_grain(struct fdisk_context *cxt, unsigned long grain)
342 {
343 if (!cxt || grain % 512)
344 return -EINVAL;
345
346 DBG(CXT, ul_debugobj(cxt, "user grain size: %lu", grain));
347 cxt->user_grain = grain;
348 return 0;
349 }
350
351 /**
352 * fdisk_has_user_device_properties:
353 * @cxt: context
354 *
355 * Returns: 1 if user specified any properties
356 */
357 int fdisk_has_user_device_properties(struct fdisk_context *cxt)
358 {
359 return (cxt->user_pyh_sector || cxt->user_log_sector ||
360 cxt->user_grain ||
361 fdisk_has_user_device_geometry(cxt));
362 }
363
364 int fdisk_has_user_device_geometry(struct fdisk_context *cxt)
365 {
366 return (cxt->user_geom.heads || cxt->user_geom.sectors || cxt->user_geom.cylinders);
367 }
368
369 int fdisk_apply_user_device_properties(struct fdisk_context *cxt)
370 {
371 int rc;
372
373 if (!cxt)
374 return -EINVAL;
375
376 DBG(CXT, ul_debugobj(cxt, "applying user device properties"));
377
378 if (cxt->user_pyh_sector)
379 cxt->phy_sector_size = cxt->user_pyh_sector;
380 if (cxt->user_log_sector) {
381 uint64_t old_total = cxt->total_sectors;
382 uint64_t old_secsz = cxt->sector_size;
383
384 cxt->sector_size = cxt->min_io_size =
385 cxt->io_size = cxt->user_log_sector;
386
387 if (cxt->sector_size != old_secsz) {
388 cxt->total_sectors = (old_total * (old_secsz/512)) / (cxt->sector_size >> 9);
389 DBG(CXT, ul_debugobj(cxt, "new total sectors: %ju", (uintmax_t)cxt->total_sectors));
390 }
391 }
392
393 if (cxt->user_geom.heads)
394 cxt->geom.heads = cxt->user_geom.heads;
395 if (cxt->user_geom.sectors)
396 cxt->geom.sectors = cxt->user_geom.sectors;
397
398 if (cxt->user_geom.cylinders)
399 cxt->geom.cylinders = cxt->user_geom.cylinders;
400 else if (cxt->user_geom.heads || cxt->user_geom.sectors)
401 recount_geometry(cxt);
402
403 rc = fdisk_reset_alignment(cxt);
404 if (rc)
405 return rc;
406
407 if (cxt->user_grain) {
408 unsigned long granularity = max(cxt->phy_sector_size, cxt->min_io_size);
409
410 cxt->grain = cxt->user_grain < granularity ? granularity : cxt->user_grain;
411 DBG(CXT, ul_debugobj(cxt, "new grain: %lu", cxt->grain));
412 }
413
414 if (cxt->firstsector_bufsz != cxt->sector_size)
415 fdisk_read_firstsector(cxt);
416
417 DBG(CXT, ul_debugobj(cxt, "new C/H/S: %u/%u/%u",
418 (unsigned) cxt->geom.cylinders,
419 (unsigned) cxt->geom.heads,
420 (unsigned) cxt->geom.sectors));
421 DBG(CXT, ul_debugobj(cxt, "new log/phy sector size: %u/%u",
422 (unsigned) cxt->sector_size,
423 (unsigned) cxt->phy_sector_size));
424
425 return 0;
426 }
427
428 void fdisk_zeroize_device_properties(struct fdisk_context *cxt)
429 {
430 assert(cxt);
431
432 cxt->io_size = 0;
433 cxt->optimal_io_size = 0;
434 cxt->min_io_size = 0;
435 cxt->phy_sector_size = 0;
436 cxt->sector_size = 0;
437 cxt->alignment_offset = 0;
438 cxt->grain = 0;
439 cxt->first_lba = 0;
440 cxt->last_lba = 0;
441 cxt->total_sectors = 0;
442
443 memset(&cxt->geom, 0, sizeof(struct fdisk_geometry));
444 }
445
446 /**
447 * fdisk_reset_device_properties:
448 * @cxt: context
449 *
450 * Resets and discovery topology (I/O limits), geometry, re-read the first
451 * rector on the device if necessary and apply user device setting (geometry
452 * and sector size), then initialize alignment according to label driver (see
453 * fdisk_reset_alignment()).
454 *
455 * You don't have to use this function by default, fdisk_assign_device() is
456 * smart enough to initialize all necessary setting.
457 *
458 * Returns: 0 on success, <0 on error.
459 */
460 int fdisk_reset_device_properties(struct fdisk_context *cxt)
461 {
462 int rc;
463
464 if (!cxt)
465 return -EINVAL;
466
467 DBG(CXT, ul_debugobj(cxt, "*** resetting device properties"));
468
469 fdisk_zeroize_device_properties(cxt);
470 fdisk_discover_topology(cxt);
471 fdisk_discover_geometry(cxt);
472
473 rc = fdisk_read_firstsector(cxt);
474 if (rc)
475 return rc;
476
477 return fdisk_apply_user_device_properties(cxt);
478 }
479
480 /*
481 * Generic (label independent) geometry
482 */
483 int fdisk_discover_geometry(struct fdisk_context *cxt)
484 {
485 fdisk_sector_t nsects = 0;
486 unsigned int h = 0, s = 0;
487
488 assert(cxt);
489 assert(cxt->geom.heads == 0);
490
491 DBG(CXT, ul_debugobj(cxt, "%s: discovering geometry...", cxt->dev_path));
492
493 if (fdisk_is_regfile(cxt))
494 cxt->total_sectors = cxt->dev_st.st_size / cxt->sector_size;
495 else {
496 /* get number of 512-byte sectors, and convert it the real sectors */
497 if (!blkdev_get_sectors(cxt->dev_fd, (unsigned long long *) &nsects))
498 cxt->total_sectors = (nsects / (cxt->sector_size >> 9));
499
500 /* what the kernel/bios thinks the geometry is */
501 blkdev_get_geometry(cxt->dev_fd, &h, &s);
502 }
503
504 DBG(CXT, ul_debugobj(cxt, "total sectors: %ju (ioctl=%ju)",
505 (uintmax_t) cxt->total_sectors,
506 (uintmax_t) nsects));
507
508 cxt->geom.cylinders = 0;
509 cxt->geom.heads = h;
510 cxt->geom.sectors = s;
511
512 /* obtained heads and sectors */
513 recount_geometry(cxt);
514
515 DBG(CXT, ul_debugobj(cxt, "result: C/H/S: %u/%u/%u",
516 (unsigned) cxt->geom.cylinders,
517 (unsigned) cxt->geom.heads,
518 (unsigned) cxt->geom.sectors));
519 return 0;
520 }
521
522 int fdisk_discover_topology(struct fdisk_context *cxt)
523 {
524 #ifdef HAVE_LIBBLKID
525 blkid_probe pr;
526 #endif
527 assert(cxt);
528 assert(cxt->sector_size == 0);
529
530 DBG(CXT, ul_debugobj(cxt, "%s: discovering topology...", cxt->dev_path));
531 #ifdef HAVE_LIBBLKID
532 DBG(CXT, ul_debugobj(cxt, "initialize libblkid prober"));
533
534 pr = blkid_new_probe();
535 if (pr && blkid_probe_set_device(pr, cxt->dev_fd, 0, 0) == 0) {
536 blkid_topology tp = blkid_probe_get_topology(pr);
537
538 if (tp) {
539 cxt->min_io_size = blkid_topology_get_minimum_io_size(tp);
540 cxt->optimal_io_size = blkid_topology_get_optimal_io_size(tp);
541 cxt->phy_sector_size = blkid_topology_get_physical_sector_size(tp);
542 cxt->alignment_offset = blkid_topology_get_alignment_offset(tp);
543
544 /* I/O size used by fdisk */
545 cxt->io_size = cxt->optimal_io_size;
546 if (!cxt->io_size)
547 /* optimal I/O is optional, default to minimum IO */
548 cxt->io_size = cxt->min_io_size;
549
550 if (cxt->io_size && cxt->phy_sector_size) {
551 if (cxt->io_size == 33553920) {
552 /* 33553920 (32 MiB - 512) is always a controller error */
553 DBG(CXT, ul_debugobj(cxt, "ignore bad I/O size 33553920"));
554 cxt->io_size = cxt->phy_sector_size;
555 } else if ((cxt->io_size % cxt->phy_sector_size) != 0) {
556 /* ignore optimal I/O if not aligned to phy.sector size */
557 DBG(CXT, ul_debugobj(cxt, "ignore misaligned I/O size"));
558 cxt->io_size = cxt->phy_sector_size;
559 }
560 }
561
562 }
563 }
564 blkid_free_probe(pr);
565 #endif
566
567 cxt->sector_size = get_sector_size(cxt);
568 if (!cxt->phy_sector_size) /* could not discover physical size */
569 cxt->phy_sector_size = cxt->sector_size;
570
571 /* no blkid or error, use default values */
572 if (!cxt->min_io_size)
573 cxt->min_io_size = cxt->sector_size;
574 if (!cxt->io_size)
575 cxt->io_size = cxt->sector_size;
576
577 DBG(CXT, ul_debugobj(cxt, "result: log/phy sector size: %ld/%ld",
578 cxt->sector_size, cxt->phy_sector_size));
579 DBG(CXT, ul_debugobj(cxt, "result: fdisk/optimal/minimal io: %ld/%ld/%ld",
580 cxt->io_size, cxt->optimal_io_size, cxt->min_io_size));
581 return 0;
582 }
583
584 static int has_topology(struct fdisk_context *cxt)
585 {
586 /*
587 * Assume that the device provides topology info if
588 * optimal_io_size is set or alignment_offset is set or
589 * minimum_io_size is not power of 2.
590 */
591 if (cxt &&
592 (cxt->optimal_io_size ||
593 cxt->alignment_offset ||
594 !is_power_of_2(cxt->min_io_size)))
595 return 1;
596 return 0;
597 }
598
599 /*
600 * The LBA of the first partition is based on the device geometry and topology.
601 * This offset is generic (and recommended) for all labels.
602 *
603 * Returns: 0 on error or number of logical sectors.
604 */
605 static fdisk_sector_t topology_get_first_lba(struct fdisk_context *cxt)
606 {
607 fdisk_sector_t x = 0, res;
608
609 if (!cxt)
610 return 0;
611
612 if (!cxt->io_size)
613 fdisk_discover_topology(cxt);
614
615 /*
616 * Align the begin of partitions to:
617 *
618 * a) topology
619 * a2) alignment offset
620 * a1) or physical sector (minimal_io_size, aka "grain")
621 *
622 * b) or default to 1MiB (2048 sectors, Windows Vista default)
623 *
624 * c) or for very small devices use 1 phy.sector
625 */
626 if (has_topology(cxt)) {
627 if (cxt->alignment_offset)
628 x = cxt->alignment_offset;
629 else if (cxt->io_size > 2048 * 512)
630 x = cxt->io_size;
631 }
632 /* default to 1MiB */
633 if (!x)
634 x = 2048 * 512;
635
636 res = x / cxt->sector_size;
637
638 /* don't use huge offset on small devices */
639 if (cxt->total_sectors <= res * 4)
640 res = cxt->phy_sector_size / cxt->sector_size;
641
642 return res;
643 }
644
645 static unsigned long topology_get_grain(struct fdisk_context *cxt)
646 {
647 unsigned long res;
648
649 if (!cxt)
650 return 0;
651
652 if (!cxt->io_size)
653 fdisk_discover_topology(cxt);
654
655 res = cxt->io_size;
656
657 /* use 1MiB grain always when possible */
658 if (res < 2048 * 512)
659 res = 2048 * 512;
660
661 /* don't use huge grain on small devices */
662 if (cxt->total_sectors <= (res * 4 / cxt->sector_size))
663 res = cxt->phy_sector_size;
664
665 return res;
666 }
667
668 /* apply label alignment setting to the context -- if not sure use
669 * fdisk_reset_alignment()
670 */
671 int fdisk_apply_label_device_properties(struct fdisk_context *cxt)
672 {
673 int rc = 0;
674
675 if (cxt->label && cxt->label->op->reset_alignment) {
676 DBG(CXT, ul_debugobj(cxt, "applying label device properties..."));
677 rc = cxt->label->op->reset_alignment(cxt);
678 }
679 return rc;
680 }
681
682 /**
683 * fdisk_reset_alignment:
684 * @cxt: fdisk context
685 *
686 * Resets alignment setting to the default and label specific values. This
687 * function does not change device properties (I/O limits, geometry etc.).
688 *
689 * Returns: 0 on success, < 0 in case of error.
690 */
691 int fdisk_reset_alignment(struct fdisk_context *cxt)
692 {
693 int rc = 0;
694
695 if (!cxt)
696 return -EINVAL;
697
698 DBG(CXT, ul_debugobj(cxt, "resetting alignment..."));
699
700 /* default */
701 cxt->grain = topology_get_grain(cxt);
702 cxt->first_lba = topology_get_first_lba(cxt);
703 cxt->last_lba = cxt->total_sectors - 1;
704
705 /* overwrite default by label stuff */
706 rc = fdisk_apply_label_device_properties(cxt);
707
708 DBG(CXT, ul_debugobj(cxt, "alignment reset to: "
709 "first LBA=%ju, last LBA=%ju, grain=%lu [rc=%d]",
710 (uintmax_t) cxt->first_lba, (uintmax_t) cxt->last_lba,
711 cxt->grain, rc));
712 return rc;
713 }
714
715
716 fdisk_sector_t fdisk_scround(struct fdisk_context *cxt, fdisk_sector_t num)
717 {
718 fdisk_sector_t un = fdisk_get_units_per_sector(cxt);
719 return (num + un - 1) / un;
720 }
721
722 fdisk_sector_t fdisk_cround(struct fdisk_context *cxt, fdisk_sector_t num)
723 {
724 return fdisk_use_cylinders(cxt) ?
725 (num / fdisk_get_units_per_sector(cxt)) + 1 : num;
726 }
727