Debian Codegraph @

texmf-dist/source/latex/xymtex/xymtxpdf/xymtx-pdf.dtx

raw
1 % \iffalse meta-comment
2 %% File: xymtx-pdf.dtx
3 %
4 % Copyright 2002,2004,2005,2009,2010,2013 by Shinsaku Fujita
5 %
6 % This file is part of XyMTeX system.
7 % -------------------------------------
8 %
9 % This file is a part of the macro package ``XyMTeX'' which has been
10 % designed for typesetting chemical structural formulas.
11 %
12 % This file is to be contained in the ``xymtex'' directory which is
13 % an input directory for TeX. It is a LaTeX optional style file and
14 % should be used only within LaTeX, because several macros of the file
15 % are based on LaTeX commands.
16 %
17 % The following book deals with an application of TeX/LaTeX to
18 % preparation of manuscripts of chemical fields:
19 % (1) Shinsaku Fujita, ``LaTeX for Chemists and Biochemists''
20 % Tokyo Kagaku Dozin, Tokyo (1993) [in Japanese].
21 % (2) Shinsaku Fujita, ``XyMTeX. Typesetting Chemical Structural
22 % Formulas'' Addison-Wesley, New York (1997).
23 %
24 % This work may be distributed and/or modified under the
25 % conditions of the LaTeX Project Public License, either version 1.3
26 % of this license or (at your option) any later version.
27 % The latest version of this license is in
28 % http://www.latex-project.org/lppl.txt
29 % and version 1.3 or later is part of all distributions of LaTeX
30 % version 2005/12/01 or later.
31 %
32 % This work has the LPPL maintenance status `maintained'.
33 % The Current Maintainer of this work is Shinsaku Fujita.
34 %
35 % This work consists of the files xymtx-pdf.dtx and xymtx-pdf.ins
36 % and the derived file xymtx-pdf.sty.
37 %
38 % Please report any bugs, comments, suggestions, etc. to:
39 % Shinsaku Fujita,
40 % Shonan Institute of Chemoinformatics and
41 % Mathematical Chemistry
42 % [email protected]
43 %
44 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
45 % \def\j@urnalname{xymtx-ps}
46 % \def\versi@ndate{May 30, 2002}
47 % \def\versi@nno{ver1.00}
48 % \def\copyrighth@lder{SF} % Shinsaku Fujita
49 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
50 % \def\j@urnalname{xymtx-ps}
51 % \def\versi@ndate{May 30, 2002}
52 % \def\versi@nno{ver1.00}
53 % \def\copyrighth@lder{SF} % Shinsaku Fujita
54 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
55 % \def\j@urnalname{xymtx-ps}
56 % \def\versi@ndate{August 30, 2004}
57 % \def\versi@nno{ver4.01}
58 % \def\copyrighth@lder{SF} % Shinsaku Fujita
59 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
60 % \def\j@urnalname{xymtx-ps}
61 % \def\versi@ndate{December 20, 2004}
62 % \def\versi@nno{ver4.02}
63 % \def\copyrighth@lder{SF} % Shinsaku Fujita
64 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
65 % \def\j@urnalname{xymtx-ps}
66 % \def\versi@ndate{June 20, 2005}
67 % \def\versi@nno{ver4.03}
68 % \def\copyrighth@lder{SF} % Shinsaku Fujita
69 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
70 % \def\j@urnalname{xymtx-ps}
71 % \def\versi@ndate{August 02, 2005}
72 % \def\versi@nno{ver4.03a}
73 % \def\copyrighth@lder{SF} % Shinsaku Fujita
74 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
75 % \def\j@urnalname{xymtx-ps}
76 % \def\versi@ndate{June 15, 2009}
77 % \def\versi@nno{ver4.04a}
78 % \def\copyrighth@lder{SF} % Shinsaku Fujita
79 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
80 % \def\j@urnalname{xymtx-ps}
81 % \def\versi@ndate{November 05, 2009}
82 % \def\versi@nno{ver4.05}
83 % \def\copyrighth@lder{SF} % Shinsaku Fujita
84 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
85 % \def\j@urnalname{xymtx-pdf}
86 % \def\versi@ndate{October 01, 2010}
87 % \def\versi@nno{ver5.00}
88 % \def\copyrighth@lder{SF} % Shinsaku Fujita
89 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
90 % \def\j@urnalname{xymtx-pdf}
91 % \def\versi@ndate{November 23, 2010}
92 % \def\versi@nno{ver5.00b}
93 % \def\copyrighth@lder{SF} % Shinsaku Fujita
94 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
95 % \def\j@urnalname{xymtx-pdf}
96 % \def\versi@ndate{March 10, 2013}
97 % \def\versi@nno{ver5.01b}
98 % \def\copyrighth@lder{SF} % Shinsaku Fujita
99 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
100 % \def\j@urnalname{xymtx-pdf}
101 % \def\versi@ndate{May 27, 2013}
102 % \def\versi@nno{ver5.01bb}
103 % \def\copyrighth@lder{SF} % Shinsaku Fujita
104 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
105 %
106 % \fi
107 %
108 % \CheckSum{1761}
109 %% \CharacterTable
110 %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
111 %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
112 %% Digits \0\1\2\3\4\5\6\7\8\9
113 %% Exclamation \! Double quote \" Hash (number) \#
114 %% Dollar \$ Percent \% Ampersand \&
115 %% Acute accent \' Left paren \( Right paren \)
116 %% Asterisk \* Plus \+ Comma \,
117 %% Minus \- Point \. Solidus \/
118 %% Colon \: Semicolon \; Less than \<
119 %% Equals \= Greater than \> Question mark \?
120 %% Commercial at \@ Left bracket \[ Backslash \\
121 %% Right bracket \] Circumflex \^ Underscore \_
122 %% Grave accent \` Left brace \{ Vertical bar \|
123 %% Right brace \} Tilde \~}
124 %
125 % \setcounter{StandardModuleDepth}{1}
126 %
127 % \StopEventually{}
128 % \MakeShortVerb{\|}
129 %
130 % \iffalse
131 % \changes{v1.00}{2002/05/30}{first edition for LaTeX2e}
132 % \changes{v4.01}{2004/08/30}{Adjust for XyMTeX version 4.01}
133 % \changes{v4.02}{2004/12/20}{Wedged bonds for stereochemistry}
134 % \changes{v4.03}{2005/06/20}{Wave bonds for stereochemistry}
135 % \changes{v4.03a}{2005/08/02}{Bug fix for the compatibility with
136 % \changes{v4.04a}{2009/06/15}{Bug fix for \cs{\Put@@@@Direct}}
137 % \changes{v4.05}{2009/11/05}{Bug fix for \cs{\Put@@@@Direct}; pLaTeXe vs. LaTeXe}
138 % \changes{v5.00}{2010/10/01}{Change the PostScript mode into the PDF mode}
139 % \changes{v5.00b}{2010/11/23}{added the pgfcore package for pdflatex}
140 % \changes{v5.01b}{2013/03/10}{Bug fix for \cs{zahyozobun}}
141 % \changes{v5.01bb}{2013/05/27}{\cs{WedgeAsSubstX} etc.}
142 % \changes{v5.01}{2013/06/21}{\cs{WavyAsSubst} etc.}
143 % \fi
144 %
145 % \iffalse
146 %<*driver>
147 \NeedsTeXFormat{pLaTeX2e}
148 % \fi
149 \ProvidesFile{xymtx-pdf.dtx}[2013/06/21 v5.01 xymtx-pdf package file]
150 % \iffalse
151 \documentclass{ltxdoc}
152 \GetFileInfo{xymtx-pdf.dtx}
153 %
154 % %%XyMTeX Logo: Definition 2%%%
155 \def\UPSILON{\char'7}
156 \def\XyM{X\kern-.30em\smash{%
157 \raise.50ex\hbox{\UPSILON}}\kern-.30em{M}}
158 \def\XyMTeX{\XyM\kern-.1em\TeX}
159 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
160 \title{Chemistry Conventions by {\sffamily xymtx-pdf.sty}
161 (\fileversion) of \XyMTeX{}}
162 \author{Shinsaku Fujita \\
163 Shonan Institute of Chemoinformatics Mathematical Chemistry, \\
164 Kaneko 479-7 Ooimachi, Ashigara-Kami-Gun,
165 Kanagawa-Ken, 258-0019 Japan
166 }
167 \date{\filedate}
168 %
169 \begin{document}
170 \maketitle
171 \DocInput{xymtx-pdf.dtx}
172 \end{document}
173 %</driver>
174 % \fi
175 %
176 % \section{Introduction}\label{xymtx-pdf:intro}
177 %
178 % This package aims at converting XyMTeX documents into PDF by
179 % using the dvipdfm(x) converter or its equivalent. The codes
180 % contained in xymtx-ps.dtx for the PostScript mode of XyMTeX
181 % have been changed and extended to match direct conversion
182 % into PDF files.
183 %
184 % \subsection{Options for {\sffamily docstrip}}
185 %
186 % \DeleteShortVerb{\|}
187 % \begin{center}
188 % \begin{tabular}{|l|l|}
189 % \hline
190 % \emph{option} & \emph{function}\\ \hline
191 % xymtxpdf & xymtx-pdf.sty \\
192 % driver & driver for this dtx file \\
193 % \hline
194 % \end{tabular}
195 % \end{center}
196 % \MakeShortVerb{\|}
197 %
198 % \subsection{Version Information}
199 %
200 % \begin{macrocode}
201 %<*xymtxpdf>
202 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
203 \def\j@urnalname{xymtx-pdf}
204 \def\versi@ndate{June 21, 2013}
205 \def\versi@nno{ver5.01}
206 \def\copyrighth@lder{SF} % Shinsaku Fujita
207 % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
208 \typeout{XyMTeX Macro File `\j@urnalname' (\versi@nno) <\versi@ndate>%
209 \space[\copyrighth@lder]}
210 % \end{macrocode}
211 %
212 % \section{Input of basic macros}
213 %
214 % To assure the compatibility to \LaTeX{}2.09 (the native mode),
215 % the commands added by \LaTeXe{} have not been used in the resulting sty
216 % files ({\sf ccycle.sty} for the present case). Hence, the combination
217 % of |\input| and |\@ifundefined| is used to crossload sty
218 % files ({\sf chemstr.sty} for the present case) in place of the
219 % |\RequirePackage| command of \LaTeXe{}.
220 % The global setting of unit by |\psset| has caused imcompatibility
221 % with the prosper package and so has been changed into a local setting.
222 % \changes{v4.03a}{2005/08/02}{Bug fix for the compatibility with
223 % the prosper package}
224 % \changes{v5.00b}{2010/11/23}{added the pgfcore package for pdflatex}
225 %
226 % \begin{macrocode}
227 % *************************
228 % * input of basic macros *
229 % *************************
230 \@ifundefined{setsixringv}{\input chemstr.sty\relax}{}
231 \RequirePackage{tikz}
232 \RequirePackage{pgfcore}%%%added 2010/11/23 by S. Fujita
233 \RequirePackage{xcolor}
234 \usetikzlibrary{arrows,decorations.pathmorphing,backgrounds,fit,calc}
235 \unitlength=0.1pt
236 \def\white{\color{white}}
237 % \end{macrocode}
238 %
239 % \begin{macrocode}
240 \newif\if@thicklinesw \@thicklineswfalse
241 \def\Thick@Lines{\@thicklineswtrue}%redefinition
242 \def\Thin@Lines{\@thicklineswfalse}%redefinition
243 \def\thickLineWidth{1.6pt}
244 \def\thinLineWidth{0.4pt}
245 % \end{macrocode}
246 %
247 % Temporary count registers:
248 % \begin{macrocode}
249 \newcount\XyMTeXnuma
250 \newcount\XyMTeXnumb
251 \newcount\XyMTeXnumc
252 \newcount\XyMTeXnumd
253 \newcount\XyMTeXnume
254 \newcount\XyMTeXnumf
255 \newcount\XyMTeXnumg
256 \newcount\XyMTeXnumh
257 \newcount\XyMTeXnumi
258 \newcount\XyMTeXcnta
259 \newcount\XyMTeXcntb
260 % \end{macrocode}
261 %
262 % Temporary dimension registers:
263 % \begin{macrocode}
264 \newdimen\XyMTeXdima
265 \newdimen\XyMTeXdimb
266 \newdimen\XyMTeXdimc
267 \newdimen\XyMTeXdimd
268 \newdimen\XyMTeXdime
269 % \end{macrocode}
270 %
271 % Temporary box registers:
272 % \begin{macrocode}
273 \newbox\BondBox
274 % \end{macrocode}
275 %
276 %
277 % The macro |\Put@@@@Line| can draw dashed bonds or wedged bonds for supporting
278 % stereochemistry. Two switches are available as follows:
279 %
280 % \begin{macro}{changedashtowedge}
281 % \begin{macro}{changewedgetodash}
282 % \changes{v4.02}{2004/12/20}{For PS mode: Switch for wedged bonds}
283 % \begin{macrocode}
284 \newif\if@wedgesw \@wedgeswtrue
285 \newif\if@hasheddashsw \@hasheddashswtrue
286 \def\wedgehasheddash{\@wedgeswtrue\@hasheddashswtrue}
287 \def\wedgehashedwedge{\@wedgeswtrue\@hasheddashswfalse}
288 \def\dashhasheddash{\@wedgeswfalse\@hasheddashswtrue}
289 \@ifundefined{ifmolfront}{\newif\ifmolfront \molfrontfalse}{}
290 \@ifundefined{if@skbondlist}{\newif\if@skbondlist \@skbondlistfalse}{}
291 % \end{macrocode}
292 % \end{macro}
293 % \end{macro}
294 %
295 % \begin{macro}{\setUnitHalfScale}
296 %
297 % The macro |\setUnitHalfScale| calculates the half of a line width
298 % (such as |\thinLineWidth| and |\thickLineWidth|), which is used
299 % to adjust the staring point of a bond line. This macro is used
300 % in |\PUT@@@@bondLINE|.
301 %
302 % \begin{macro}{\NumRound}
303 % \begin{macro}{\UHalfScaleGain}
304 % These macros result in, e.g.,
305 % 0.4pt $\rightarrow$ 0.4/0.1 (/2) $\rightarrow$ 1.999 $\rightarrow$ 2.
306 % (Not used)
307 %
308 % \begin{macrocode}
309 \def\NumRound#1.#2#3\@nil{%shishagonyu
310 \begingroup
311 \XyMTeXcnta=0 \XyMTeXcntb=0
312 \XyMTeXcnta=#1 %%\typeout{A:\the\XyMTeXcnta;}
313 \XyMTeXcntb=#2 %%\typeout{B:\the\XyMTeXcntb;}
314 \ifnum\XyMTeXcntb<5 \else
315 \advance\XyMTeXcnta by1 %%\typeout{C:\the\XyMTeXcnta;}
316 \fi\xdef\@UHalfScale{\the\XyMTeXcnta}\endgroup}
317 {\catcode`\p=12 \catcode`\t=12
318 \gdef\UHalfScaleGain#1pt{\gdef\@@UHalfScale{#1}}}
319 \def\setUnitHalfScale#1{%
320 \@tempdima=#1 \dimen0=0.1pt
321 \@tempcnta=\@tempdima
322 \@tempcntb=\dimen0
323 \multiply\@tempcntb by10
324 \divide\@tempcntb by65536%
325 \divide\@tempdima by \@tempcntb
326 \multiply\@tempdima by5 %%\typeout{D:\the\@tempdima}
327 \expandafter\UHalfScaleGain\the\@tempdima%
328 \expandafter\NumRound\@@UHalfScale\@nil
329 }
330 % \end{macrocode}
331 % \end{macro}
332 % \end{macro}
333 % \end{macro}
334 %
335 % \begin{macro}{\PutSimpleBondBox}
336 % \changes{v5.00}{2010/10/01}{For PDF mode: macro for adjusting the position of
337 % a simple bond (straight line, dashed line, etc.)}
338 % The macro |\PutSimpleBondBox| is used to adjust the coordinates of joint positions
339 % by using the macros |\PUT@@@@bondLINE| and |h@shedd@shbond|, which draw simple bonds
340 % such as straight lines and dashed lines.
341 %
342 % \begin{macrocode}
343 %\newbox\BondBox
344 \def\PutSimpleBondBox(#1,#2)(#3,#4)#5{%for simple bonds
345 \setbox\BondBox=\hbox{#5}%
346 \XyMTeXdima=#1\unitlength
347 \XyMTeXdimb=#3\unitlength
348 \XyMTeXdimc=\thickLineWidth
349 \divide\XyMTeXdimc by2%adjustment by the half of a line width
350 \ifdim \XyMTeXdima>\XyMTeXdimb\relax
351 \XyMTeXdimd=\XyMTeXdima
352 \XyMTeXdime=\XyMTeXdimb
353 \advance\XyMTeXdime by -\XyMTeXdimd
354 \advance\XyMTeXdime by -\XyMTeXdimc
355 \put(#1,#2){\kern\XyMTeXdime\box\BondBox}%
356 \else
357 \ifdim \XyMTeXdima=\XyMTeXdimb\relax
358 \XyMTeXdimd=-\XyMTeXdimc
359 %%%\put(#1,#2){\kern\XyMTeXdimd\raise\XyMTeXdimd\hbox{\box\BondBox}}%
360 \put(#1,#2){\kern\XyMTeXdimd\box\BondBox}%
361 \else
362 \XyMTeXdimd=-\XyMTeXdimc
363 \put(#1,#2){\kern\XyMTeXdimd\box\BondBox}%
364 \fi\fi%
365 }
366 % \end{macrocode}
367 % \end{macro}
368 %
369 % \begin{macro}{\tikznodimension}
370 % \changes{v5.00}{2010/10/01}{For PDF mode: macro for typesetting an object
371 % as having no dimensions. }
372 % The macro |\tikznodimension| is used in place of the macro |\PutSimpleBondBox|, which
373 % is originally used to adjust the coordinates of joint positions.
374 % Thereby, the macros |\PUT@@@@bondLINE| and |h@shedd@shbond| have a more rigorous basis
375 % in putting such simple bonds as straight lines and dashed lines.
376 %
377 % \begin{macrocode}
378 \def\tikznodimension#1{\tikz{%
379 \pgfpathrectangle{\pgfpointorigin}{\pgfpointorigin}
380 \pgfusepath{use as bounding box} % draws nothing
381 #1}}
382 % \end{macrocode}
383 % \end{macro}
384 %
385 % The macro |\PUT@@@@bondLINE| is used in the macro |\Put@@@@Line|,
386 % which draws a bond line. This macro relies on the |\tikz| graphic
387 % enviroment.
388 %
389 % \begin{macro}{\PUT@@@@bondLINE}
390 % \begin{macro}{\PutPDFLine}
391 % \changes{v5.00}{2010/10/01}{For PDF mode: macro for
392 % drawing a straight-line bond after adjusting its joint position}
393 % \begin{macrocode}
394 \def\PUT@@@@bondLINE(#1,#2)(#3,#4)#5{%
395 \begingroup
396 %\setbox0=\hbox{%
397 %\tikz[baseline=(X.base)]{%
398 %\draw[line width=#5,line cap=round]%
399 %(#1\unitlength,#2\unitlength) coordinate (X) -- (#3\unitlength,#4\unitlength);}}%
400 %\PutSimpleBondBox(#1,#2)(#3,#4){\box0}%
401 \tikznodimension{%
402 \draw[line width=#5]%
403 (#1\unitlength,#2\unitlength) -- (#3\unitlength,#4\unitlength);}%
404 \endgroup
405 }
406 \let\PutPDFLine=\PUT@@@@bondLINE%for user's use
407 \let\PutBondLine=\PUT@@@@bondLINE%for user's use
408 % \end{macrocode}
409 % \end{macro}
410 % \end{macro}
411 %
412 % \begin{macro}{\PutBondBox}
413 % \changes{v5.00}{2010/10/01}{For PDF mode: a macro for putting a bond box
414 % after adjusting coordinates. }
415 % The macro |\PutBondBox| put a bond box at an adjusted point,
416 % where the bond box contain a wadge or wavy bond drawn by using
417 % the pgf package (\verb/\tikz/). The macro is used in the
418 % macros |\PUT@@@@wedgeLINE| and |\PUT@@@@wavyLINE|.
419 % \begin{macrocode}
420 %\newbox\BondBox
421 \def\PutBondBox(#1,#2)(#3,#4)#5{%for wedge and wavy bonds
422 \setbox\BondBox=\hbox{#5}%
423 \XyMTeXdima=#1\unitlength
424 \XyMTeXdimb=#3\unitlength
425 \XyMTeXdimc=4pt%
426 \divide\XyMTeXdimc by2%adjustment by the half of a line width
427 \if@vertbond
428 \XyMTeXdimd=\wd\BondBox
429 \divide\XyMTeXdimd by2\relax
430 \put(#1,#2){\kern-1.2\XyMTeXdimd\box\BondBox}%%tentative factor 1.2
431 \else
432 \if@horizbond
433 \ifdim \XyMTeXdima>\XyMTeXdimb\relax
434 \XyMTeXdimd=\XyMTeXdima
435 \XyMTeXdime=\XyMTeXdimb
436 \advance\XyMTeXdime by -\XyMTeXdimd
437 \put(#1,#2){\kern-5\unitlength\kern\XyMTeXdime\box\BondBox}%tentative factor 5 %%%
438 \else
439 \put(#1,#2){\kern-1.2\unitlength\box\BondBox}%tentative factor 1.2
440 \fi
441 \else
442 %%
443 \ifdim \XyMTeXdima>\XyMTeXdimb\relax
444 \XyMTeXdime=-\wd\BondBox
445 \put(#1,#2){\kern0.2\unitlength\kern\XyMTeXdime\box\BondBox}%tentative shift factor
446 \else
447 \ifdim \wd\BondBox<4.3pt\relax
448 \XyMTeXdimd=\wd\BondBox
449 \divide\XyMTeXdimd by2\relax
450 \put(#1,#2){\kern-1.3\XyMTeXdimd\box\BondBox}%tentative shift factor 1.3
451 %
452 \else
453 \put(#1,#2){\kern-3\unitlength\box\BondBox}%tentative shift factor 3
454 \fi\fi
455 \fi\fi}
456 % \end{macrocode}
457 % \end{macro}
458 %
459 % The macro |\PUT@@@@wedgeLINE| is used in the macro |\Put@@@@Line|,
460 % which draws a bond wedge. This macro relies on the |\tikz| graphic
461 % enviroment.
462 %
463 % \begin{macro}{\PUT@@@@wedgeLINE}
464 % \changes{v5.00}{2010/10/01}{For PDF mode: a macro for putting a wedge bond. }
465 % \begin{macrocode}
466 \newif\if@vertbond \@vertbondfalse
467 \newif\if@horizbond \@horizbondfalse
468 \def\PUT@@@@wedgeLINE(#1,#2)(#3,#4)(#5,#6){%
469 \begingroup
470 %\setbox0=\hbox{%
471 %\tikz[baseline=(X.base)]{%
472 %\filldraw[black,line cap=round]%
473 %(#1\unitlength,#2\unitlength) coordinate (X) -- (#3\unitlength,#4\unitlength)%
474 %-- (#5\unitlength,#6\unitlength) -- (#1\unitlength,#2\unitlength);}}%
475 %\PutBondBox(#1,#2)(#3,#4){\box0}%adjustment
476 \tikznodimension{%
477 \filldraw%
478 (#1\unitlength,#2\unitlength) -- (#3\unitlength,#4\unitlength)%
479 -- (#5\unitlength,#6\unitlength) -- (#1\unitlength,#2\unitlength);}%
480 \endgroup
481 }
482 % \end{macrocode}
483 % \end{macro}
484 %
485 % The macro |\PUT@@@@wavyLINE| is used in the macro |\Put@@@@Line|,
486 % which draws a wavy bond. This macro relies on the |\tikz| graphic
487 % enviroment.
488 %
489 % \begin{macro}{\PUT@@@@wavyLINE}
490 % \changes{v5.00}{2010/10/01}{For PDF mode: a macro for putting a wavy bond. }
491 % \begin{macrocode}
492 \def\PUT@@@@wavyLINE(#1,#2)(#3,#4){%
493 \begingroup
494 %\setbox0=\hbox{%
495 %\tikz[baseline=(X.base)]{%
496 %\draw[line cap=round,decorate,
497 %decoration={coil,aspect=0,segment length=2pt,amplitude=1pt}]%
498 %(#1\unitlength,#2\unitlength) coordinate (X) -- (#3\unitlength,#4\unitlength);}}%
499 %\PutBondBox(#1,#2)(#3,#4){\box0}%adjustment
500 \tikznodimension{%
501 \draw[decorate,
502 decoration={coil,aspect=0,segment length=2pt,amplitude=1pt}]%
503 (#1\unitlength,#2\unitlength) coordinate (X) -- (#3\unitlength,#4\unitlength);}%
504 \endgroup
505 }
506 % \end{macrocode}
507 % \end{macro}
508 %
509 % \begin{macro}{\Put@@@@Line}
510 % \changes{v4.02}{2004/12/20}{For PS modes: Wedged bonds for stereochemistry}
511 % \changes{v4.03}{2005/07/20}{For PS modes: Switch for wave bonds}
512 % \changes{v5.00}{2010/10/01}{For PDF mode: a macro for putting a bond line. }
513 %
514 % Temporary count registers:
515 % \begin{macrocode}
516 \newcount\@tempcntXa \newcount\@tempcntYa \newcount\@tempcntz
517 \newcount\@tempcntXb \newcount\@tempcntYb \newcount\@tempcntzz
518 \newcount\@tempcntXc \newcount\@tempcntYc \newcount\@tempcntzzz
519 % \end{macrocode}
520 %
521 % \begin{macrocode}
522 \long\gdef\Put@@@@Line(#1,#2)(#3,#4)#5{%
523 \begingroup
524 %%x-coordinate
525 \@tempcntXa=0\relax
526 \ifnum#3>0\relax \@tempcntXa=#5\relax
527 \else\ifnum#3<0\relax\@tempcntXa=-#5\relax\fi\fi
528 \advance\@tempcntXa by#1\relax
529 %%y-coordinate
530 \@tempcntYa=#5\relax
531 \ifnum#3=0\relax\else
532 \multiply\@tempcntYa by#4\relax\multiply\@tempcntYa by10\relax
533 \divide\@tempcntYa by#3\relax\divide\@tempcntYa by10\relax\fi
534 \ifnum\@tempcntYa<0\relax
535 \ifnum#4>0\relax\@tempcntYa=-\@tempcntYa\fi
536 \else
537 \ifnum\@tempcntYa>0\relax
538 \ifnum#4<0\relax\@tempcntYa=-\@tempcntYa\fi\fi
539 \fi
540 \advance\@tempcntYa by#2\relax
541 %
542 \if@thicklinesw
543 \if@wedgesw
544 \ifmolfront%bold dash bond for skeletal bond for pyranose etc.
545 \PUT@@@@bondLINE(#1,#2)(\the\@tempcntXa,\the\@tempcntYa){\thickLineWidth}%
546 \else
547 \if@skbondlist%bold dash bond skeletal bond for general cases
548 \PUT@@@@bondLINE(#1,#2)(\the\@tempcntXa,\the\@tempcntYa){\thickLineWidth}%
549 \else%wedged bond
550 \ifnum#1=#3
551 \@vertbondtrue\@horizbondfalse
552 \else
553 \ifnum#2=#4
554 \@vertbondfalse\@horizbondtrue
555 \else
556 \@vertbondfalse\@horizbondfalse
557 \fi\fi
558 \stereo@wedgedimension(#3,#4){10}%
559 \PUT@@@@wedgeLINE(#1,#2)(\the\@tempcntXb,\the\@tempcntYb)(\the\@tempcntXc,\the\@tempcntYc)%
560 \fi\fi
561 \else
562 \PUT@@@@bondLINE(#1,#2)(\the\@tempcntXa,\the\@tempcntYa){\thickLineWidth}%
563 \fi
564 \else
565 \ifwavebond
566 \ifnum#1=#3
567 \@vertbondtrue\@horizbondfalse
568 \else
569 \ifnum#2=#4
570 \@vertbondfalse\@horizbondtrue
571 \else
572 \@vertbondfalse\@horizbondfalse
573 \fi\fi
574 \PUT@@@@wavyLINE(#1,#2)(\the\@tempcntXa,\the\@tempcntYa)%
575 \else
576 \PUT@@@@bondLINE(#1,#2)(\the\@tempcntXa,\the\@tempcntYa){\thinLineWidth}%
577 \fi
578 \fi
579 \@tempcntXa=0\relax \@tempcntYa=0\relax
580 \endgroup}%end of Put@@@@Line
581 % \end{macrocode}
582 % \end{macro}
583 %
584 % The macro |\stereo@wedgedimension| calculates the coordinates of three positions
585 % for drawing a wedged bond, which is drawn by the |\pspolygon| command of the PSTricks package.
586 %
587 % \begin{macro}{stereo@wedgedimension}
588 % \changes{v4.02}{2004/12/20}{For PS mode: Wedged bonds for stereochemistry}
589 % \begin{macrocode}
590 \newif\if@wedgeadjust
591 \def\stereo@wedgedimension(#1,#2)#3{%
592 \@tempcntXb=0\relax
593 \@tempcntYb=0\relax
594 \@tempcntXc=0\relax
595 \@tempcntYc=0\relax
596 %%
597 \@wedgeadjustfalse
598 \ifnum#1<0 \@tempcntzz=-#1\else\@tempcntzz=#1\fi
599 \ifnum#2<0 \@tempcntzzz=-#2\else\@tempcntzzz=#2\fi
600 \ifnum#1=0\else
601 \multiply\@tempcntzzz by10\relax \divide\@tempcntzzz by\@tempcntzz\fi%% (3/5)x10=6
602 \ifnum\@tempcntzzz>7\relax\else\@wedgeadjusttrue\fi
603 %%one point of wedge
604 \ifnum#1=0\relax
605 \@tempcntXb=#3 \advance\@tempcntXb by8\relax
606 \@tempcntYb=0\relax
607 \else
608 \ifnum#2=0\relax
609 \@tempcntXb=0\relax
610 \@tempcntYb=#3 \advance\@tempcntYb by8\relax
611 \else
612 \@tempcntXb=#3\relax
613 \@tempcntYb=-#3\relax
614 \if@wedgeadjust
615 \advance\@tempcntXb by8\relax
616 \advance\@tempcntYb by-8\relax
617 \fi
618 \multiply\@tempcntXb by#2\relax\multiply\@tempcntXb by10\relax
619 \divide\@tempcntXb by#1\relax\divide\@tempcntXb by10\relax\fi\fi
620 \advance\@tempcntXb by\@tempcntXa\relax
621 \advance\@tempcntYb by\@tempcntYa\relax
622 %%other point of wedge
623 \ifnum#1=0\relax
624 \@tempcntXc=-#3 \advance\@tempcntXc by-8\relax
625 \@tempcntYc=0\relax
626 \else
627 \ifnum#2=0\relax
628 \@tempcntXc=0\relax
629 \@tempcntYc=-#3 \advance\@tempcntYc by-8\relax
630 \else
631 \@tempcntXc=-#3\relax
632 \@tempcntYc=#3\relax
633 \if@wedgeadjust
634 \advance\@tempcntXc by-6\relax
635 \advance\@tempcntYc by6\relax
636 \fi
637 \multiply\@tempcntXc by#2\relax\multiply\@tempcntXc by10\relax
638 \divide\@tempcntXc by#1\relax\divide\@tempcntXc by10\relax\fi\fi
639 \advance\@tempcntXc by\@tempcntXa\relax
640 \advance\@tempcntYc by\@tempcntYa\relax
641 }%%end of \stereo@wedgedimension
642 % \end{macrocode}
643 % \end{macro}
644 %
645 % The |Put@@@@Direct| macro is the same as the original command
646 % |\put| for the LaTeX picture environment.
647 %
648 % \begin{macro}{Put@@@@Direct}
649 % \changes{v5.00}{2010/10/01}{For PDF mode: a macro for putting an object. }
650 % \begin{macrocode}
651 \let\Put@@@@Direct=\put
652 % \end{macrocode}
653 % \end{macro}
654 %
655 % The macros |\Put@@@@oCircle| and |\Put@@@@sCircle| draw
656 % small circles for designating original points.
657 %
658 % \begin{macro}{\Put@@@@oCircle}
659 % \begin{macrocode}
660 \def\Put@@@@oCircle(#1,#2)#3{\begingroup%
661 \@tempcntz=#3 \divide\@tempcntz by2\relax
662 %dimension \pgf@xx or \pgf@yy overflow
663 %\setbox0=\hbox{%
664 %{\tikz[baseline=(X.base)]{%
665 %\draw[scale=\@UScale,line width=0.4pt]%
666 %(#1,#2) coordinate (X) circle (\@tempcntz);}}}%
667 \setbox0=\hbox{%
668 {\tikz[baseline=(X.base)]{%
669 \draw[line width=0.4pt]%
670 (#1\unitlength,#2\unitlength) coordinate (X) circle (\@tempcntz\unitlength);}}}%
671 \put(#1,#2){\kern-0.5\wd0\hbox{\box0}}%
672 \endgroup}
673 % \end{macrocode}
674 % \end{macro}
675 %
676 % \begin{macro}{\Put@@@@sCircle}
677 % \begin{macrocode}
678 \def\Put@@@@sCircle(#1,#2)#3{\begingroup%
679 \@tempcntz=#3 \divide\@tempcntz by2\relax
680 %dimension pgf@xx or pgf@yy overflow
681 %\setbox0=\hbox{%
682 %{\tikz[baseline=(X.base)]{%
683 %\draw[scale=\@UScale,line width=2pt]%
684 %(#1,#2) coordinate (X) circle (\@tempcntz);}}}%
685 \setbox0=\hbox{%
686 {\tikz[baseline=(X.base)]{%
687 \draw[line width=2pt]%
688 (#1\unitlength,#2\unitlength) coordinate (X) circle (\@tempcntz\unitlength);}}}%
689 \put(#1,#2){\kern-0.5\wd0\hbox{\box0}}%
690 \endgroup}
691 % \end{macrocode}
692 % \end{macro}
693 %
694 % Dotted lines by the old macro |\d@@t@rline| are changed into hashed dash bonds
695 % in the new macro |\d@@t@@rline| (|\@wedgeswfalse|). If |\@wedgeswtrue| is
696 % declared (default), the new macro draws a hashed wedged bonds.
697 %
698 % \begin{macro}{d@@t@@rline}
699 % \changes{v4.02}{2004/12/20}{Hashed wedged bonds for stereochemistry}
700 % \changes{v5.00}{2010/10/01}{Renamed for PDF mode}
701 % \begin{macrocode}
702 \def\d@@t@@rline(#1,#2)(#3,#4)#5/(#6,#7)(#8,#9){%
703 \if@hasheddashsw
704 \@ifundefined{tikz}{%
705 \XyMTeXWarning{A dottedline is replaced by a solid line.}%
706 \Put@Line(#1,#2)(#3,#4){#5}%
707 }{{\thicklines%
708 \h@shedd@shbond(#1,#2)(#3,#4){#5}/(#6,#7)(#8,#9)}}%
709 \else
710 \if@skbondlist%hashed dash bond skeletal bond for general cases
711 \@ifundefined{tikz}{%
712 \XyMTeXWarning{A dottedline is replaced by a solid line.}%
713 \Put@Line(#1,#2)(#3,#4){#5}%
714 }{{\thicklines%
715 \h@shedd@shbond(#1,#2)(#3,#4){#5}/(#6,#7)(#8,#9)}}%
716 \else
717 \h@shedw@dgebond(#1,#2)(#3,#4){#5}/(#6,#7)(#8,#9)%
718 \fi\fi
719 }%end of \d@@t@@rline
720 % \end{macrocode}
721 % \end{macro}
722 %
723 % The inner macro |\h@shedd@shbond| works in the macro |\d@@t@@rline| for
724 % drawing a hased dash bond.
725 %
726 % \begin{macro}{h@shedd@shbond}
727 % \changes{v4.02}{2004/12/20}{For PS mode: Hashed dash bonds for stereochemistry}
728 % \changes{v5.00}{2010/10/01}{Renamed for PDF mode: macro for
729 % drawing a hashed dash bond after adjusting its joint position}
730 % \begin{macrocode}
731 \def\h@shedd@shbond(#1,#2)(#3,#4)#5/(#6,#7)(#8,#9){%
732 \begingroup
733 \@tempcntzz=12\relax
734 \@tempcntzzz=-30\relax%almost no shortening
735 \bond@shorten(#1,#2)(#3,#4){#5}/(#6,#7)(#8,#9)%
736 %\ifdim\unitlength>0.08pt
737 %\setbox0=\hbox{%
738 %\tikz[baseline=(X.base)]{%
739 %\draw[dashed,line width=\thickLineWidth,dash pattern=on 1pt off 1.2pt]%
740 %(\@tempcntXb\unitlength,\@tempcntYb\unitlength) coordinate (X) --%
741 %(\@tempcntXc\unitlength,\@tempcntYc\unitlength);}}%
742 %\else
743 %\setbox0=\hbox{%
744 %\tikz[baseline=(X.base)]{%
745 %\draw[dashed,line width=\thickLineWidth,dash pattern=on 0.8pt off 1pt]%
746 %(\@tempcntXb\unitlength,\@tempcntYb\unitlength) coordinate (X) --%
747 %(\@tempcntXc\unitlength,\@tempcntYc\unitlength);}}%
748 %\fi
749 %\PutSimpleBondBox(\the\@tempcntXb,\the\@tempcntYb)(\the\@tempcntXc,\the\@tempcntYc){\box0}%
750 \ifdim\unitlength>0.08pt
751 \tikznodimension{%
752 \draw[dashed,line width=\thickLineWidth,dash pattern=on 1pt off 1.2pt]%
753 (\@tempcntXb\unitlength,\@tempcntYb\unitlength) coordinate (X) --%
754 (\@tempcntXc\unitlength,\@tempcntYc\unitlength);}%
755 \else
756 \tikznodimension{%
757 \draw[dashed,line width=\thickLineWidth,dash pattern=on 0.8pt off 1pt]%
758 (\@tempcntXb\unitlength,\@tempcntYb\unitlength) coordinate (X) --%
759 (\@tempcntXc\unitlength,\@tempcntYc\unitlength);}%
760 \fi
761 \endgroup}
762 % \end{macrocode}
763 % \end{macro}
764 %
765 % The inner macro |\h@shedw@dgebond| works in the macro |\d@@t@@rline| for
766 % drawing a hashed wedged bond.
767 %
768 %
769 % \begin{macro}{h@shedw@dgebond}
770 % \changes{v4.02}{2004/12/20}{For PS mode: Hashed wedged bonds for stereochemistry}
771 % \changes{v5.00}{2010/10/01}{For PDF mode: Hashed wedged bonds for stereochemistry}
772 % \begin{macrocode}
773 \def\h@shedw@dgebond(#1,#2)(#3,#4)#5/(#6,#7)(#8,#9){%
774 \begingroup
775 \@tempcntXa=#8\relax
776 \@tempcntYa=#9\relax
777 \stereo@wedgedimension(#3,#4){10}%
778 \XyMTeXnumf=\@tempcntXb
779 \XyMTeXnumg=\@tempcntYb
780 \XyMTeXnumh=\@tempcntXc
781 \XyMTeXnumi=\@tempcntYc
782 \@tempcntzz=5\relax
783 \@tempcntzzz=-12\relax
784 \bond@shorten(#1,#2)(#3,#4){#5}/(#6,#7)(#8,#9)%
785 %\setbox0=\hbox{%
786 %\tikz[baseline=(X.base)]{%
787 %\filldraw[black,line cap=round]%
788 %(#1\unitlength,#2\unitlength) coordinate (X) --%
789 %(\XyMTeXnumf\unitlength,\XyMTeXnumg\unitlength) --%
790 %(\XyMTeXnumh\unitlength,\XyMTeXnumi\unitlength) -- (#1\unitlength,#2\unitlength);%
791 %\draw[dashed,line width=4pt,dash pattern=on 1pt off 1.2pt,color=white]%
792 %(\@tempcntXb\unitlength,\@tempcntYb\unitlength) --%
793 %(\@tempcntXc\unitlength,\@tempcntYc\unitlength);%
794 %}}%
795 %\PutBondBox(#1,#2)(\the\@tempcntXc,\the\@tempcntYc){\box0}%
796 \tikznodimension{%
797 \filldraw%
798 (#1\unitlength,#2\unitlength) --%
799 (\XyMTeXnumf\unitlength,\XyMTeXnumg\unitlength) --%
800 (\XyMTeXnumh\unitlength,\XyMTeXnumi\unitlength) -- (#1\unitlength,#2\unitlength);%
801 \draw[dashed,line width=4pt,dash pattern=on 1pt off 1.2pt,color=white]%
802 (\@tempcntXb\unitlength,\@tempcntYb\unitlength) --%
803 (\@tempcntXc\unitlength,\@tempcntYc\unitlength);}%
804 \endgroup
805 }%%end of \h@shedw@dgebond
806 % \end{macrocode}
807 % \end{macro}
808 %
809 % The inner macro |\bond@shorten| works in the macros |\h@shedd@shbond| and |\h@shedw@dgebond| for
810 % shortening the resulting hashed bonds. This macro calculates the coordinates of the staring
811 % point and the end point.
812 %
813 % \begin{macro}{bond@shorten}
814 % \changes{v4.02}{2004/12/20}{Hashed forms for dash and wedged bonds}
815 % \begin{macrocode}
816 \def\bond@shorten(#1,#2)(#3,#4)#5/(#6,#7)(#8,#9){%
817 \@tempcntXb=#8\relax
818 \@tempcntYb=#9\relax
819 \advance\@tempcntXb by-#6\relax \divide\@tempcntXb by\@tempcntzz\relax
820 \advance\@tempcntYb by-#7\relax \divide\@tempcntYb by\@tempcntzz\relax
821 \advance\@tempcntXb by#6\relax
822 \advance\@tempcntYb by#7\relax
823 \@tempcntXc=#8\relax
824 \@tempcntYc=#9\relax
825 \advance\@tempcntXc by-#6\relax \divide\@tempcntXc by\@tempcntzzz\relax
826 \advance\@tempcntYc by-#7\relax \divide\@tempcntYc by\@tempcntzzz\relax
827 \advance\@tempcntXc by#8\relax
828 \advance\@tempcntYc by#9\relax
829 }%%end of \bondshorten
830 % \end{macrocode}
831 % \end{macro}
832 %
833 % Skeletal bold bonds can be changed into wedges, where
834 % |\WedgeAsSubst| is described in an ATOMLIST as a kind of
835 % spiro substituent.
836 %
837 % \begin{macro}{WedgeAsSubst}
838 % \changes{v4.02}{2004/12/20}{For PS mode: Wedged skeletal bonds}
839 % \changes{v5.00}{2010/10/01}{For PDF mode: Checked OK}
840 % \begin{macrocode}
841 \def\WedgeAsSubstPDF(#1,#2)(#3,#4)#5{%
842 \begingroup
843 \@thicklineswtrue \@wedgeswtrue
844 \molfrontfalse \@skbondlistfalse
845 \Put@@@@Line(#1,#2)(#3,#4){#5}%
846 \endgroup}
847 \let\WedgeAsSubst=\WedgeAsSubstPDF%for compatibility to PS mode
848 % \end{macrocode}
849 % \end{macro}
850 %
851 % The macro |\stereo@wedgedimensionX| has a starting point,
852 % an endpoint, and the width of a wedge as its arguments.
853 % Compare this command with |\stereo@wedgedimension|, which has
854 % a starting point, a slope, and the width of a wedge
855 % as its arguments.
856 %
857 % \begin{macro}{stereo@wedgedimensionX}
858 % \changes{v5.01}{2013/05/27}{dimension of wedge}
859 % \begin{macrocode}
860 \def\stereo@wedgedimensionX(#1,#2)(#3,#4){%
861 \@ifnextchar[{\stereo@@wedgedimensionX(#1,#2)(#3,#4)}%
862 {\stereo@@wedgedimensionX(#1,#2)(#3,#4)[10]}}
863 \def\stereo@@wedgedimensionX(#1,#2)(#3,#4)[#5]{%
864 \@tempcnta=-#1\relax
865 \advance\@tempcnta by#3\relax
866 %%\typeout{KKK:\the\@tempcnta}%
867 \@tempcntb=-#2\relax
868 \advance\@tempcntb by#4\relax
869 %%%\typeout{LLL:\the\@tempcntb}%
870 \stereo@wedgedimension(\the\@tempcnta,\the\@tempcntb){#5}%
871 %%%\typeout{MMM; (\the\@tempcntXb,\the\@tempcntYb)(\the\@tempcntXc,\the\@tempcntYc)}
872 \advance\@tempcntXb by#3\relax
873 \advance\@tempcntYb by#4\relax
874 \advance\@tempcntXc by#3\relax
875 \advance\@tempcntYc by#4\relax}
876 % \end{macrocode}
877 % \end{macro}
878 %
879 % The macro |\WedgeAsSubstX| has a starting point,
880 % an endpoint, and the width of a wedge as its arguments.
881 % Compare this command with |\WedgeAsSubst|, which has
882 % a starting point, a slope, and the width of a wedge
883 % as its arguments.
884 %
885 % \begin{macro}{WedgeAsSubstX}
886 % \changes{v5.01}{2013/05/27}{For PDF mode: Checked OK}
887 % \begin{macrocode}
888 \def\WedgeAsSubstXPDF(#1,#2)(#3,#4){%
889 \@ifnextchar[{\Wedge@AsSubstXPDF(#1,#2)(#3,#4)}%
890 {\Wedge@AsSubstXPDF(#1,#2)(#3,#4)[10]}}
891 \def\Wedge@AsSubstXPDF(#1,#2)(#3,#4)[#5]{%
892 \begingroup
893 \stereo@wedgedimensionX(#1,#2)(#3,#4)[#5]%
894 \PUT@@@@wedgeLINE(#1,#2)(\the\@tempcntXb,\the\@tempcntYb)(\the\@tempcntXc,\the\@tempcntYc)%
895 \endgroup}
896 \let\WedgeAsSubstX=\WedgeAsSubstXPDF%for compatibility to PDF mode
897 % \end{macrocode}
898 % \end{macro}
899 %
900 % The macro |\NumR@und| gives a round integer.
901 % For example 1.99996 is transformed into 2. A negative
902 % value is permitted.
903 %
904 % \begin{macro}{\NumR@und}
905 % \changes{v5.00}{2010/10/01}{For PDF mode}
906 % \begin{macrocode}
907 \def\NumR@und#1.#2#3\@nil{%shishagonyu
908 \begingroup
909 \XyMTeXcnta=0 \XyMTeXcntb=0\relax
910 \XyMTeXcnta=#1 %%\typeout{A:\the\XyMTeXcnta;}
911 \XyMTeXcntb=#2 %%\typeout{B:\the\XyMTeXcntb;}
912 \ifnum\XyMTeXcnta>0\relax
913 \ifnum\XyMTeXcntb<5 \else
914 \advance\XyMTeXcnta by1 %%\typeout{C:\the\XyMTeXcnta;}
915 \fi
916 \else
917 \ifnum\XyMTeXcntb<5 \else
918 \advance\XyMTeXcnta by-1 %%\typeout{C:\the\XyMTeXcnta;}
919 \fi\fi\xdef\@yzobun{\the\XyMTeXcnta}\endgroup}
920 % \end{macrocode}
921 % \end{macro}
922 %
923 % The macro |\zahyozobun| calculates the increments of x- and y-coordinates
924 % by starting from a slope of the LaTeX picture environment.
925 % For example, the slope (5,3) (for the argument \verb/(#3,#4)/ and the x-increment \verb/#5/=171)
926 % is transformed to give an x-increment (\verb/\@xzobun/ = 171) and
927 % an y-increment (\verb/\@yzobun/ = 103). When the slope is (0,1) etc., we put the
928 % x-increment (\verb/\@xzobun/ = 0) and y-increment (\verb/\@yzobun/ = \verb/#5/).
929 %
930 % \begin{macro}{\zahyozobun}
931 % \changes{v5.00}{2010/10/01}{For PDF mode}
932 % \changes{v5.01}{2013/03/10}{Bug fix for the slope (0,1) etc.}
933 % \begin{macrocode}
934 {\catcode`\p=12 \catcode`\t=12
935 \gdef\zobunGain#1pt{\gdef\@zobun{#1}}}
936
937 \def\zahyozobun(#1,#2)(#3,#4)#5{%
938 \@tempdima=#5\unitlength
939 \@tempdimb=#3\unitlength
940 \@tempcnta=\@tempdima
941 \ifdim\@tempdimb<0pt
942 \@tempcntb=-\@tempdimb
943 \else
944 \@tempcntb=\@tempdimb
945 \fi
946 %%
947 \ifdim\@tempdimb=0pt%bugfix 2013/02/06
948 \else
949 %%
950 \multiply\@tempcntb by10\relax
951 \divide\@tempcntb by65536%
952 \divide\@tempdima by \@tempcntb
953 \multiply\@tempdima by#4\relax
954 \multiply\@tempdima by10 %%\typeout{D:\the\@tempdima}
955 \expandafter\zobunGain\the\@tempdima%
956 \expandafter\NumR@und\@zobun\@nil
957 \fi%%%
958 \ifnum#3<0
959 \xdef\@xzobun{-#5}%
960 \else
961 \ifnum#3=0%bugfix 2013/02/06
962 \xdef\@xzobun{#3}%
963 \ifnum#4<0
964 \xdef\@yzobun{-#5}%
965 \else
966 \xdef\@yzobun{#5}%
967 \fi%bugfix 2013/02/06
968 \else
969 \xdef\@xzobun{#5}%
970 \fi
971 \fi
972 }
973 % \end{macrocode}
974 % \end{macro}
975 %
976 % The inner macro |\bond@sh@rten| works in a similar way to |\bond@shorten| for
977 % shortening the resulting hashed bonds. This macro calculates the coordinates of the starting
978 % point and the end point.
979 %
980 % \begin{macro}{\bond@sh@rten}
981 % \changes{v5.00}{2010/10/01}{For PDF mode: Hashed forms for dash and wedged bonds}
982 % \begin{macrocode}
983 \def\bond@sh@rten(#1,#2)(#3,#4)#5{%%%%%%%/(#6,#7)(#8,#9){%
984 \zahyozobun(#1,#2)(#3,#4){#5}%
985 \@tempcntXb=\@xzobun\relax%%\typeout{SSS:\@xzobun}
986 \@tempcntYb=\@yzobun\relax%%\typeout{TTT:\@yzobun}
987 \divide\@tempcntXb by\@tempcntzz\relax
988 \divide\@tempcntYb by\@tempcntzz\relax
989 \advance\@tempcntXb by#1\relax
990 \advance\@tempcntYb by#2\relax
991 \@tempcntXc=\@xzobun\relax%%\typeout{KKKK:\@xzobun}
992 \@tempcntYc=\@yzobun\relax%%\typeout{LLLL:\@yzobun}
993 \divide\@tempcntXc by\@tempcntzzz\relax
994 \divide\@tempcntYc by\@tempcntzzz\relax
995 \advance\@tempcntXc by#1\relax
996 \advance\@tempcntXc by\@xzobun\relax%%\typeout{AAAA:\the\@tempcntXc}
997 \advance\@tempcntYc by#2\relax
998 \advance\@tempcntYc by\@yzobun\relax%%\typeout{BBBB:\the\@tempcntYc}
999 }%%end of \bondshorten
1000 % \end{macrocode}
1001 % \end{macro}
1002
1003 % Skeletal hashed dash bonds can be changed into hashed wedges, where
1004 % |\HashWedgeAsSubst| is described in an ATOMLIST as a kind of
1005 % spiro substituent. This macro is essentially equivalent to
1006 % the macro |h@shedw@dgebond|, whose last four arguments are omitted.
1007 %
1008 % \begin{macro}{HashWedgeAsSubst}
1009 % \changes{v4.02}{2004/12/20}{For PS mode: Hashed wedged bonds for stereochemistry}
1010 % \changes{v5.00}{2010/10/01}{For PDF mode: Hashed wedged bonds for stereochemistry}
1011 % \begin{macrocode}
1012 \def\HashWedgeAsSubstPDF(#1,#2)(#3,#4)#5{%
1013 \begingroup
1014 \zahyozobun(#1,#2)(#3,#4){#5}%
1015 \@tempcntXa=\@xzobun\relax
1016 \advance\@tempcntXa by#1\relax
1017 \@tempcntYa=\@yzobun\relax
1018 \advance\@tempcntYa by#2\relax
1019 \stereo@wedgedimension(#3,#4){10}%
1020 \XyMTeXnumf=\@tempcntXb%%\typeout{CCCCF:\the\XyMTeXnumf}
1021 \XyMTeXnumg=\@tempcntYb%%\typeout{CCCCG:\the\XyMTeXnumg}
1022 \XyMTeXnumh=\@tempcntXc%%\typeout{CCCCH:\the\XyMTeXnumh}
1023 \XyMTeXnumi=\@tempcntYc%%\typeout{CCCCI:\the\XyMTeXnumi}
1024 \@tempcntzz=5\relax
1025 \@tempcntzzz=-12\relax
1026 \bond@sh@rten(#1,#2)(#3,#4){#5}%
1027 %\setbox0=\hbox{%
1028 %\tikz[baseline=(X.base)]{%
1029 %\filldraw[black,line cap=round]%
1030 %(#1\unitlength,#2\unitlength) coordinate (X) --%
1031 %(\XyMTeXnumf\unitlength,\XyMTeXnumg\unitlength) --%
1032 %(\XyMTeXnumh\unitlength,\XyMTeXnumi\unitlength) -- (#1\unitlength,#2\unitlength);%
1033 %\draw[dashed,line width=4pt,dash pattern=on 1pt off 1.2pt,color=white]%
1034 %(\@tempcntXb\unitlength,\@tempcntYb\unitlength) --%
1035 %(\@tempcntXc\unitlength,\@tempcntYc\unitlength);%
1036 %}}%
1037 %\PutBondBox(#1,#2)(\the\@tempcntXc,\the\@tempcntYc){\box0}%
1038 \tikznodimension{%
1039 \filldraw%
1040 (#1\unitlength,#2\unitlength) coordinate (X) --%
1041 (\XyMTeXnumf\unitlength,\XyMTeXnumg\unitlength) --%
1042 (\XyMTeXnumh\unitlength,\XyMTeXnumi\unitlength) -- (#1\unitlength,#2\unitlength);%
1043 \draw[dashed,line width=4pt,dash pattern=on 1pt off 1.2pt,color=white]%
1044 (\@tempcntXb\unitlength,\@tempcntYb\unitlength) --%
1045 (\@tempcntXc\unitlength,\@tempcntYc\unitlength);}%
1046 \endgroup
1047 }%%end of \HashWedgeAsSubstPDF
1048 \let\HashWedgeAsSubst=\HashWedgeAsSubstPDF%For compatibility to PS mode
1049 % \end{macrocode}
1050 % \end{macro}
1051 %
1052 % The macro |\HashWedgeAsSubstX| has a starting point,
1053 % an endpoint, and the width of a wedge as its arguments.
1054 % Compare this command with |\HashWedgeAsSubst|, which has
1055 % a starting point, a slope, and the width of a wedge
1056 % as its arguments.
1057 %
1058 % \begin{macro}{HashWedgeAsSubstX}
1059 % \changes{v5.01}{2013/05/27}{For PDF mode: Hashed wedged bonds for stereochemistry}
1060 % \begin{macrocode}
1061 \def\HashWedgeAsSubstXPDF(#1,#2)(#3,#4){%
1062 \@ifnextchar[{\HashWedge@AsSubstXPDF(#1,#2)(#3,#4)}%
1063 {\HashWedge@AsSubstXPDF(#1,#2)(#3,#4)[10]}}
1064 \def\HashWedge@AsSubstXPDF(#1,#2)(#3,#4)[#5]{%
1065 \begingroup
1066 \WedgeAsSubstXPDF(#1,#2)(#3,#4)[#5]%
1067 \@tempdima=#5\unitlength \multiply\@tempdima by3\relax
1068 \advance\@tempdima by1pt%adjustment
1069 \tikznodimension{%
1070 \draw[dashed,line width=\@tempdima,
1071 dash pattern=on 1pt off 1.2pt,color=white]%
1072 (#1\unitlength,#2\unitlength) --%
1073 (#3\unitlength,#4\unitlength);}%
1074 \endgroup
1075 }%%end of \HashWedgeAsSubstXPDF
1076 \let\HashWedgeAsSubstX=\HashWedgeAsSubstXPDF%For compatibility to PDF mode
1077 % \end{macrocode}
1078 % \end{macro}
1079 %
1080 % Skeletal bold bonds can be changed into wavy bonds, where
1081 % |\WavyAsSubst| is described in an ATOMLIST as a kind of
1082 % spiro substituent.
1083 %
1084 % \begin{macro}{\WavyAsSubst}
1085 % \changes{v5.01}{2004/06/21}{For PDF mode: Wavy skeletal bonds}
1086 % \begin{macrocode}
1087 \def\WavyAsSubstPDF(#1,#2)(#3,#4)#5{%
1088 \begingroup
1089 \wavebondtrue
1090 \Put@@@@Line(#1,#2)(#3,#4){#5}%
1091 \endgroup}
1092 \let\WavyAsSubst=\WavyAsSubstPDF%for compatibility to PS mode
1093 % \end{macrocode}
1094 % \end{macro}
1095 %
1096 % The macro |\WavyAsSubstX| has a starting point,
1097 % an endpoint, and the width of a wedge as its arguments.
1098 % Compare this command with |\WavyAsSubst|, which has
1099 % a starting point, a slope, and the width of a wedge
1100 % as its arguments.
1101 %
1102 % \begin{macro}{WedgeAsSubstX}
1103 % \changes{v5.01}{2013/06/21}{For PDF mode: Checked OK}
1104 % \begin{macrocode}
1105 \let\WavyAsSubstXPDF=\PUT@@@@wavyLINE
1106 \let\WavyAsSubstX=\WavyAsSubstXPDF%for compatibility to PS mode
1107 % \end{macrocode}
1108 % \end{macro}
1109 %
1110 % The command \cs{downnobond} is redefined for pstricks.
1111 % \begin{macro}{\upnobond}
1112 % \begin{macro}{\downnobond}
1113 % \begin{macrocode}
1114 %\def\upnobond#1#2{%nochange
1115 %\hbox{\hbox to0.72em{\hss#1\hss}\kern-0.72em\raise2.2ex\hbox{#2}}}
1116 \def\downnobond#1#2{%
1117 \hbox{\smash{\hbox to0.72em{\hss#1\hss}\kern-0.72em\lower2.2ex\hbox{#2}}}}
1118 % \end{macrocode}
1119 % \end{macro}
1120 % \end{macro}
1121 %
1122 % The macro |\PUT@@@@dashedLINE| is used to draw a dashed bond line,
1123 % which usually links two non-adjacent atoms of a cyclic compound.
1124 % This macro relies on the |\tikz| graphic enviroment.
1125 %
1126 % \begin{macro}{\PUT@@@@dashedLINE}
1127 % \begin{macro}{\PutPDFdashed}
1128 % \begin{macro}{\PutDashedBond}
1129 % \changes{v5.00}{2010/10/01}{For PDF mode}
1130 % \begin{macrocode}
1131 \def\PUT@@@@dashedLINE(#1,#2)(#3,#4)#5{%
1132 \begingroup
1133 %\ifdim\unitlength>0.08pt
1134 %\setbox0=\hbox{%
1135 %\tikz[baseline=(X.base)]{%
1136 %\draw[dashed,line width=#5,dash pattern=on 1pt off 1.2pt]%
1137 %(#1\unitlength,#2\unitlength) -- (#3\unitlength,#4\unitlength);}}%
1138 %\else
1139 %\setbox0=\hbox{%
1140 %\tikz[baseline=(X.base)]{%
1141 %\draw[dashed,line width=#5,dash pattern=on 0.8pt off 1pt]%
1142 %(#1\unitlength,#2\unitlength) -- (#3\unitlength,#4\unitlength);}}%
1143 %\fi
1144 %\PutSimpleBondBox(#1,#2)(#3,#4){\box0}%
1145 \ifdim\unitlength>0.08pt
1146 \tikznodimension{%
1147 \draw[dashed,line width=#5,dash pattern=on 1pt off 1.2pt]%
1148 (#1\unitlength,#2\unitlength) -- (#3\unitlength,#4\unitlength);}%
1149 \else
1150 \tikznodimension{%
1151 \draw[dashed,line width=#5,dash pattern=on 0.8pt off 1pt]%
1152 (#1\unitlength,#2\unitlength) -- (#3\unitlength,#4\unitlength);}%
1153 \fi
1154 \endgroup
1155 }
1156 \let\PutPDFdashed=\PUT@@@@dashedLINE%for user's use
1157 \let\PutDashedBond=\PUT@@@@dashedLINE%for compatibility to PS mode
1158 % \end{macrocode}
1159 % \end{macro}
1160 % \end{macro}
1161 % \end{macro}
1162 %
1163 % The macro |\set@xy@PDFcoords| is used in the macro |\putRoundArrowPDF|
1164 % for drawing round arrows. This command supports a format-changing
1165 % mechanism to assure the compatibility to the PostScript mode.
1166 %
1167 % \begin{macro}{\Temp@ArCords}
1168 % \begin{macro}{\set@xy@PDFcoords}
1169 % \changes{v5.00}{2010/10/01}{For PDF mode}
1170 % \begin{macrocode}
1171 \newtoks\Temp@ArCords \Temp@ArCords={}
1172 \def\set@xy@PDFcoords(#1,#2){%
1173 \ifnum\@tempcnta=1\relax
1174 \Temp@ArCords={(#1\unitlength,#2\unitlength) }\else
1175 \expandafter\Temp@ArCords\expandafter{\the\Temp@ArCords -- %
1176 (#1\unitlength,#2\unitlength)}\fi}
1177 % \end{macrocode}
1178 % \end{macro}
1179 % \end{macro}
1180 %
1181 % The macro |\setRoundArrPDF| is used in the macro |\putRoundArrowPDF|
1182 % for drawing round arrows. This command is based on |\tikznodimension|
1183 % to draw round arrows. The letter string |\RoundedCornersWidth| stores
1184 % the standard roundness st a corner point.
1185 %
1186 % \begin{macro}{\RoundedCornersWidth}
1187 % \begin{macro}{\setRoundArrPDF}
1188 % \changes{v5.00}{2010/10/01}{For PDF mode}
1189 % \begin{macrocode}
1190 \def\RoundedCornersWidth{4pt}
1191 \def\setRoundArrPDF#1{%
1192 \ifnum\@tempcnta>5\relax
1193 \def\RoundedCornersWidth{4pt}%
1194 \else
1195 \def\RoundedCornersWidth{8pt}\fi
1196 \tikznodimension{%
1197 \draw[\RoundArrowHead,line width=0.4pt,%
1198 rounded corners=\RoundedCornersWidth]#1;}}%
1199 % \end{macrocode}
1200 % \end{macro}
1201 % \end{macro}
1202 %
1203 % The macro |\putRoundArrowPDF| throws its main task to its inner
1204 % macro |\putRound@rrowPDF|, which treats an optional argument
1205 % for specifying the direction of an arrow head and reads coordinates
1206 % repeatedly by using |\@forendparenthesis|. The |\@forendparenthesis|
1207 % command is defined in the \textsf{chemstr} package.
1208 % The macro |\putRoundArrow| is defined as a user command to
1209 % assure the compatibility to the PostScriot mode.
1210 %
1211 % \begin{macro}{\putRoundArrowPDF}
1212 % \begin{macro}{\putRound@rrowPDF}
1213 % \begin{macro}{\putRoundArrow}
1214 % \changes{v5.00}{2010/10/01}{For PDF mode}
1215 % \begin{macrocode}
1216 \def\putRoundArrowPDF{%
1217 \@ifnextchar[{\putRound@rrowPDF}{\putRound@rrowPDF[->]}}
1218 \def\putRound@rrowPDF[#1]#2{%
1219 \edef\RoundArrowHead{#1}%
1220 \Temp@ArCords={}\@tempcnta=\@ne\relax
1221 \@forendparenthesis\member:=#2\do{%
1222 \ifx\member\empty\else
1223 \expandafter\set@xy@PDFcoords\member)\fi
1224 \advance\@tempcnta\@ne}%
1225 \expandafter\setRoundArrPDF\expandafter{\the\Temp@ArCords}%
1226 }
1227 \let\putRoundArrow=\putRoundArrowPDF
1228 % \end{macrocode}
1229 % \end{macro}
1230 % \end{macro}
1231 % \end{macro}
1232 %
1233 % The command |\changeunitlength| is redefined for using the pgf (tikz) package.
1234 % The pgf package uses ``scale'' in optional designations in place of
1235 % the setting by \verb/\unitlength/. The setting of \verb/\unitlength=0.1pt/ is
1236 % regarded as corresponding to \verb/scale=0.00357/, which is stored in
1237 % \verb/\@UScale/ after it is obtained by the \verb/\setUnitScale/ command.
1238 % \begin{macro}{\changeunitlength}
1239 % \begin{macro}{\UScaleGain}
1240 % \begin{macro}{\setUnitScale}
1241 % \begin{macrocode}
1242 %%added 2010/08/17
1243 {\catcode`\p=12 \catcode`\t=12
1244 \gdef\UScaleGain#1pt{\gdef\@UScale{#1}}}
1245 \def\setUnitScale#1{%
1246 \@tempdima=#1 \dimen0=1cm
1247 \@tempcnta=\@tempdima
1248 \@tempcntb=\dimen0
1249 \divide\@tempcntb by65536%
1250 \divide\@tempdima by \@tempcntb
1251 \expandafter\UScaleGain\the\@tempdima}
1252 \setUnitScale{0.1pt}%standard setting
1253 %%%
1254 \newif\ifsizereduction\sizereductionfalse
1255 \def\@@@changeunitlength#1{\unitlength=#1\relax
1256 \setUnitScale{#1}%%% scale=\@UScale
1257 \ifdim\unitlength<0.1pt \sizereductiontrue
1258 \ifdim\unitlength<0.062pt \let\substfontsize=\tiny \else
1259 \ifdim\unitlength<0.072pt \let\substfontsize=\scriptsize \else
1260 \ifdim\unitlength<0.082pt \let\substfontsize=\footnotesize
1261 \fi\fi\fi
1262 \else \let\substfontsize=\normalsize\fi}
1263 % \end{macrocode}
1264 % \end{macro}
1265 % \end{macro}
1266 % \end{macro}
1267 %
1268 % \begin{macro}{\red etc.}
1269 % \changes{v5.00}{2010/10/01}{bond coloring for PDF mode}
1270 % \begin{macrocode}
1271 \def\red{\color{red}}
1272 \def\green{\color{green}}
1273 \def\blue{\color{blue}}
1274 \def\cyan{\color{cyan}}
1275 \def\magenta{\color{magenta}}
1276 \def\yellow{\color{yellow}}
1277 \def\black{\color{black}}
1278 \def\white{\color{white}}
1279 % \end{macrocode}
1280 % \end{macro}
1281 %
1282 % \begin{macro}{\xymcolor}
1283 % \begin{macro}{\redx etc.}
1284 % These macros are defined to avoid \texttt{**Warning** color stack underflow}
1285 % during processing by the dvipdfmx converter.
1286 % \changes{v5.00}{2010/10/01}{Added: Colors for TeX/LaTeX mode}
1287 % \begin{macrocode}
1288 \def\xymcolor#1#2{\mbox{\color{#1}#2}}
1289 %defined in the bondcolor packag
1290 %\def\redx#1{\xymcolor{red}{#1}}
1291 %\def\bluex#1{\xymcolor{blue}{#1}}
1292 %\def\greenx#1{\xymcolor{green}{#1}}
1293 %\def\blackx#1{\xymcolor{black}{#1}}
1294 %\def\cyanx#1{\xymcolor{cyan}{#1}}
1295 %\def\yellowx#1{\xymcolor{yellow}{#1}}
1296 %\def\magentax#1{\xymcolor{magenta}{#1}}
1297 %\def\whitex#1{\xymcolor{white}{#1}}
1298 % \end{macrocode}
1299 % \end{macro}
1300 % \end{macro}
1301 %
1302 % \begin{macro}{\Color@@@@Line}
1303 % \changes{v5.00}{2010/10/01}{For coloring skeletal bond in PDF mode}
1304 % The last argument (\#7) specifies a line color.
1305 % This command is used in the definition of |\replaceSKbond|
1306 % of the \textsf{bondcolor} package by putting \verb/#7=white/.
1307 % \begin{macro}{\Color@Line}
1308 % \begin{macrocode}
1309 \def\Color@@@@Line{%
1310 \@ifnextchar[{\C@lor@@@@Line}{\C@lor@@@@Line[0.4pt]}}
1311 \def\C@lor@@@@Line[#1](#2,#3)(#4,#5)#6#7{%
1312 \begingroup
1313 \SlopetoXY(#2,#3)(#4,#5){#6}%%
1314 \@tempdime=\unitlength \multiply\@tempdime by#2\relax
1315 \@tempdimb=\unitlength \multiply\@tempdimb by#3\relax
1316 \@tempdimc=\unitlength \multiply\@tempdimc by\@tempcntXa\relax
1317 \@tempdimd=\unitlength \multiply\@tempdimd by\@tempcntYa\relax
1318 \tikznodimension{%
1319 \draw[line width=#1,color=#7]%
1320 (\@tempdime,\@tempdimb) --(\@tempdimc,\@tempdimd);}%
1321 \endgroup}%end of \Color@@@@Line
1322 \let\Color@Line=\Color@@@@Line%for PDF mode
1323 % \end{macrocode}
1324 % \end{macro}
1325 % \end{macro}
1326 %
1327 % \begin{macro}{setxymtxpdf}
1328 % \changes{v5.00}{2010/10/01}{For PDF mode}
1329 % \begin{macrocode}
1330 \def\setxymtxpdf{%
1331 \@ifnextchar[{\@setxymtxpdf}{\@setxymtxpdf[0.1pt]}}
1332 \def\@setxymtxpdf[#1]{%
1333 \PDFmodetrue
1334 \let\sfpicture=\picture
1335 \let\endsfpicture=\endpicture
1336 \let\thicklines=\Thick@Lines
1337 \let\thinlines=\Thin@Lines
1338 \let\Put@Line=\Put@@@@Line
1339 \let\Color@Line=\Color@@@@Line%for PDF mode
1340 \let\Put@Direct=\Put@@@@Direct
1341 \let\Put@oCircle=\Put@@@@oCircle
1342 \let\Put@sCircle=\Put@@@@sCircle
1343 \let\dotorline=\d@@t@@rline
1344 \let\WedgeAsSubst=\WedgeAsSubstPDF%for compatibility to PS mode
1345 \let\HashWedgeAsSubst=\HashWedgeAsSubstPDF%For compatibility to PS mode
1346 \let\WedgeAsSubstX=\WedgeAsSubstXPDF%for compatibility to PDF mode
1347 \let\HashWedgeAsSubstX=\HashWedgeAsSubstXPDF%For compatibility to PDF mode
1348 \let\PutBondLine=\PUT@@@@bondLINE%for user's use
1349 \let\PutDashedBond=\PUT@@@@dashedLINE%for compatibility to PS mode
1350 \let\putRoundArrow=\putRoundArrowPDF%for compatibility to PS mode
1351 \let\changeunitlength=\@@@changeunitlength
1352 \changeunitlength{#1}%
1353 \wedgehasheddash%
1354 }
1355 \setxymtxpdf
1356 %</xymtxpdf>
1357 % \end{macrocode}
1358 % \end{macro}
1359 %
1360 % \Finale
1361 %
1362 \endinput