| 1 |
% \iffalse meta-comment |
| 2 |
% |
| 3 |
% xtab.dtx |
| 4 |
% Author: Peter Wilson (herries dot press (at) earthlink dor net) |
| 5 |
% Maintainer: Will Robertson (will dot robertson at latex-project dot org) |
| 6 |
% Copyright 1998--2008 Peter R. Wilson |
| 7 |
% Copyright 2010--2011 Will Robertson |
| 8 |
% |
| 9 |
% This work may be distributed and/or modified under the |
| 10 |
% conditions of the LaTeX Project Public License, either |
| 11 |
% version 1.3c of this license or (at your option) any |
| 12 |
% later version: <http://www.latex-project.org/lppl.txt> |
| 13 |
% |
| 14 |
% This work has the LPPL maintenance status "maintained". |
| 15 |
% The Current Maintainer of this work is Will Robertson. |
| 16 |
% |
| 17 |
% This work consists of the files listed in the README file. |
| 18 |
% |
| 19 |
%<*driver> |
| 20 |
\ProvidesFile{xtab.dtx} |
| 21 |
%</driver> |
| 22 |
%<xtab>\ProvidesPackage{xtab} |
| 23 |
%<*xtab> |
| 24 |
[2011/07/31 v2.3f Extended supertabular package] |
| 25 |
%</xtab> |
| 26 |
% |
| 27 |
%<*driver> |
| 28 |
\documentclass{ltxdoc} |
| 29 |
\usepackage{xtab} |
| 30 |
%\usepackage{xtab-b} |
| 31 |
\providecommand{\captionsize}{} |
| 32 |
\EnableCrossrefs |
| 33 |
\CodelineIndex |
| 34 |
\setcounter{StandardModuleDepth}{1} |
| 35 |
\begin{document} |
| 36 |
\DocInput{xtab.dtx} |
| 37 |
\end{document} |
| 38 |
%</driver> |
| 39 |
% |
| 40 |
% \fi |
| 41 |
% \CheckSum{1527} |
| 42 |
% |
| 43 |
% \DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath} |
| 44 |
% \DoNotIndex{\@centercr,\@cite} |
| 45 |
% \DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue} |
| 46 |
% \DoNotIndex{\@input,\@ixpt,\@m} |
| 47 |
% \DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint} |
| 48 |
% \DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb} |
| 49 |
% \DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt} |
| 50 |
% \DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt} |
| 51 |
% \DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace} |
| 52 |
% \DoNotIndex{\advance,\Alph,\alph} |
| 53 |
% \DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box} |
| 54 |
% \DoNotIndex{\bullet} |
| 55 |
% \DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption} |
| 56 |
% \DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass} |
| 57 |
% \DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist} |
| 58 |
% \DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} |
| 59 |
% \DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter} |
| 60 |
% \DoNotIndex{\fbox} |
| 61 |
% \DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef} |
| 62 |
% \DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} |
| 63 |
% \DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi} |
| 64 |
% \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi} |
| 65 |
% \DoNotIndex{\input} |
| 66 |
% \DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark} |
| 67 |
% \DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright} |
| 68 |
% \DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} |
| 69 |
% \DoNotIndex{\NeedsTeXFormat,\newdimen} |
| 70 |
% \DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number} |
| 71 |
% \DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@} |
| 72 |
% \DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip} |
| 73 |
% \DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} |
| 74 |
% \DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} |
| 75 |
% \DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} |
| 76 |
% \DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman} |
| 77 |
% \DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength} |
| 78 |
% \DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space} |
| 79 |
% \DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase} |
| 80 |
% \DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt} |
| 81 |
% \DoNotIndex{\viipt,\vipt,\vskip,\vspace} |
| 82 |
% \DoNotIndex{\wd,\xiipt,\year,\z@} |
| 83 |
% |
| 84 |
% \def\dtxfile{xtab.dtx} |
| 85 |
% \GetFileInfo{\dtxfile} |
| 86 |
% \newcommand*{\Lpack}[1]{\textsf {#1}} ^^A typeset a package |
| 87 |
% \newcommand*{\Lopt}[1]{\textsf {#1}} ^^A typeset an option |
| 88 |
% \newcommand*{\file}[1]{\texttt {#1}} ^^A typeset a file |
| 89 |
% \newcommand*{\Lcount}[1]{\textsl {\small#1}} ^^A typeset a counter |
| 90 |
% \newcommand*{\pstyle}[1]{\textsl {#1}} ^^A typeset a pagestyle |
| 91 |
% \newcommand*{\Lenv}[1]{\texttt {#1}} ^^A typeset an environment |
| 92 |
% |
| 93 |
% \changes{v2.2}{1998/10/14}{Rewrote the documentation} |
| 94 |
% \changes{v2.2}{1998/10/14}{Changed names from ...supertab... to ...xtab...} |
| 95 |
% \changes{v2.2}{1998/10/14}{Kept supertab... as synonyms for xtab..., but deprecated them} |
| 96 |
% \changes{v2.2a}{2000/02/15}{Deleted supertab... } |
| 97 |
% \changes{v2.2a}{2000/02/15}{Updated to latest ISO class} |
| 98 |
% \changes{v2.3}{2000/04/09}{Improved pagebreak control via \cs{xentrystretch} } |
| 99 |
% \changes{v2.3b}{2007/03/24}{Allow calc package calculations} |
| 100 |
% \changes{v2.3c}{2008/07/26}{Tried to eliminate all extraneous spaces} |
| 101 |
% \changes{v2.3d}{2009/09/04}{New maintainer (Will Robertson)} |
| 102 |
% \changes{v2.3f}{2011/07/31}{Escape some line-endings} |
| 103 |
% |
| 104 |
% \title{The \Lpack{xtab} package\thanks{This |
| 105 |
% file (\texttt{\dtxfile}) has version number \fileversion, last revised |
| 106 |
% \filedate.}} |
| 107 |
% |
| 108 |
% \author{ |
| 109 |
% Author: Peter Wilson, Herries Press \\ |
| 110 |
% Maintainer: Will Robertson \\ |
| 111 |
% \texttt{will dot robertson at latex-project dot org} |
| 112 |
% } |
| 113 |
% \date{\filedate} |
| 114 |
% \maketitle |
| 115 |
% \begin{abstract} |
| 116 |
% The \Lpack{xtab} package enables long tables to be automatically broken |
| 117 |
% at page boundaries. It is an extension of the \Lpack{supertabular} |
| 118 |
% package and also reduces or eliminates some of its weaknesses. |
| 119 |
% \end{abstract} |
| 120 |
% \tableofcontents |
| 121 |
% \listoftables |
| 122 |
% |
| 123 |
% \StopEventually{} |
| 124 |
% |
| 125 |
% \section{Introduction} |
| 126 |
% |
| 127 |
% Although the \Lpack{xtab} package was originally developed as part of a |
| 128 |
% suite for typesetting ISO international standards~\cite{PRW96i}, it |
| 129 |
% is also applicable for use with the \LaTeX{} standard classes. |
| 130 |
% The package is an extension of the \Lpack{supertabular} package |
| 131 |
% developed by Johannes Braams and Theo |
| 132 |
% Jurriens.\footnote{\Lpack{supertabular.sty}, version 4.1c, 7 November 1997.} |
| 133 |
% It reduces some of the weaknesses noted in the \Lpack{supertabular} |
| 134 |
% documentation and provides additional functionality. |
| 135 |
% |
| 136 |
% |
| 137 |
% Section~\ref{sec:usr} provides the user manual for the package which |
| 138 |
% enables long tables to be automatically broken across multiple pages. |
| 139 |
% Section~\ref{sec:xtab} describes the implementation. |
| 140 |
% |
| 141 |
% This manual is typeset according to the conventions of the |
| 142 |
% \LaTeX{} \textsc{docstrip} utility which enables the automatic |
| 143 |
% extraction of the \LaTeX{} macro source files~\cite{GOOSSENS94}. |
| 144 |
% |
| 145 |
% |
| 146 |
% \section{The \Lpack{xtab} package} \label{sec:usr} |
| 147 |
% |
| 148 |
% The \Lpack{supertabular} package provides for the automatic |
| 149 |
% breaking of a long table across page boundaries. |
| 150 |
% The extension provided here enables the |
| 151 |
% heading on the table on the last page to differ from those on earlier |
| 152 |
% pages of the table. |
| 153 |
% The downside of the extension is that \LaTeX{} has to be run twice |
| 154 |
% if the document contains a |supertabular|. However, \LaTeX{} is usually |
| 155 |
% run at least twice for any but the simplest document in order to get |
| 156 |
% cross-references and Table of Contents, etc., resolved correctly. |
| 157 |
% |
| 158 |
% The current version of the extension also either cures or reduces |
| 159 |
% following |
| 160 |
% weaknesses in the \Lpack{supertabular} package.\footnote{I have |
| 161 |
% corresponded with the authors of \Lpack{supertabular} about these.} |
| 162 |
% \begin{enumerate} |
| 163 |
% \item Sometimes the top caption of a |supertabular| is printed on |
| 164 |
% one page and the body is printed on the following page(s). |
| 165 |
% That is, there is a lonely caption. |
| 166 |
% \item Sometimes the last page of a |supertabular| consists of an |
| 167 |
% empty table. That is, just the head and foot of the table are |
| 168 |
% printed. |
| 169 |
% \item If the number of lines in the first header for the table differs |
| 170 |
% from the number of lines in subsequent headers, then the |
| 171 |
% continuation pages of the table may be too short or, more |
| 172 |
% troubling, too long. |
| 173 |
% \end{enumerate} |
| 174 |
% |
| 175 |
% The weaknesses are caused by trying to guess where \TeX{} will put a page |
| 176 |
% break. The package has to guesstimate how long the next entry will be in |
| 177 |
% the table and, if it is too long for the available space, it puts in its |
| 178 |
% own page break. If its guess is off too much in one direction, \TeX{} will |
| 179 |
% break the page unexpectadly; if it's off in the other direction |
| 180 |
% \Lpack{supertabular} will put in an unnecessary page break. |
| 181 |
% |
| 182 |
% The \Lpack{xtab} package has reduced, but perhaps not entirely |
| 183 |
% eliminated, these weaknesses. Some hand tuning may still be required. |
| 184 |
% |
| 185 |
% |
| 186 |
% |
| 187 |
% The principal commands available are given in Table~\ref{tab:xtab}. |
| 188 |
% \DeleteShortVerb{\|} |
| 189 |
% \MakeShortVerb{\?} |
| 190 |
% \topcaption{The principal xtab package commands} \label{tab:xtab} |
| 191 |
% \tablefirsthead{\hline \multicolumn{1}{|c|}{\textbf{Command}} & |
| 192 |
% \multicolumn{1}{c|}{\textbf{Effect}} \\ \hline } |
| 193 |
% \tablehead{\multicolumn{2}{c}% |
| 194 |
% {{\captionsize\bfseries \tablename\ \thetable{} -- continued from previous page}} \\ |
| 195 |
% \hline \multicolumn{1}{|c|}{\textbf{Command}} & |
| 196 |
% \multicolumn{1}{c|}{\textbf{Effect}} \\ \hline } |
| 197 |
% \tablelasthead{\multicolumn{2}{c}% |
| 198 |
% {{\captionsize\bfseries \tablename\ \thetable{} -- concluded from previous page}} \\ |
| 199 |
% \hline \multicolumn{1}{|c|}{\textbf{Command}} & |
| 200 |
% \multicolumn{1}{c|}{\textbf{Effect}} \\ \hline } |
| 201 |
% \tabletail{\hline \multicolumn{2}{|r|}{{Continued on next page}} \\ \hline} |
| 202 |
% \tablelasttail{\hline \hline} |
| 203 |
% |
| 204 |
% \begin{center} |
| 205 |
% \begin{xtabular}{|l|p{0.5\textwidth}|} |
| 206 |
% ?\begin{xtabular}{...}? & This is equivalent to the normal |
| 207 |
% ?\begin{tabular}{...}? environment. |
| 208 |
% You supply the specification of the columns |
| 209 |
% just as for the normal tabular environment. |
| 210 |
% \\ |
| 211 |
% & |
| 212 |
% All commands that can be used within a |
| 213 |
% \Lenv{tabular} |
| 214 |
% environment can also be used within |
| 215 |
% the \Lenv{xtabular} environment. |
| 216 |
% \\ |
| 217 |
% & |
| 218 |
% Unlike the \Lenv{tabular} environment which prevents page breaking |
| 219 |
% within the tabular, the \Lenv{xtabular} allows page breaking, so that |
| 220 |
% tabulars can extend automatically across several pages. |
| 221 |
% \\ |
| 222 |
% & |
| 223 |
% \Lenv{xtabular} |
| 224 |
% starts off with a \Lenv{tabular} environment and checks the amount of |
| 225 |
% space left on the page as it adds each row to the tabulation. |
| 226 |
% If the space left on the page is too short for another row, then |
| 227 |
% it ends the current \Lenv{tabular}, performs a page break and starts |
| 228 |
% another \Lenv{tabular} on the following page. This process is repeated |
| 229 |
% until all the rows have been output. |
| 230 |
% \\ |
| 231 |
% & |
| 232 |
% There are special commands for captioning an \Lenv{xtabular} as a |
| 233 |
% table, and also elements can be automatically inserted after each |
| 234 |
% (internal) ?\begin{tabular}? and immediately before each |
| 235 |
% ?\end{tabular}?. |
| 236 |
% \\ |
| 237 |
% & |
| 238 |
% Do not put a \Lenv{xtabular} in a \Lenv{table} environment, |
| 239 |
% as the \Lenv{table} |
| 240 |
% environment keeps its contents on a single page (presumably you |
| 241 |
% are using \Lenv{xtabular} because its contents are longer than |
| 242 |
% one page). |
| 243 |
% \\ |
| 244 |
% ?\end{xtabular}? & End the \Lenv{xtabular} environment. \\ \hline |
| 245 |
% ?\begin{mpxtabular}? & Like the \Lenv{xtabular} environment |
| 246 |
% except that each `page' is put into a ?minipage? first. |
| 247 |
% \\ |
| 248 |
% & |
| 249 |
% Thus it is possible to have footnotes inside an \Lenv{mpxtabular}. |
| 250 |
% The footnote text is printed at the end of each page. |
| 251 |
% \\ |
| 252 |
% ?\end{mpxtabular}? & End the \Lenv{mpxtabular} environment. \\ \hline |
| 253 |
% & \textbf{Note:} If any of the following commands |
| 254 |
% are used, then they should be placed |
| 255 |
% before the particular \Lenv{xtabular} |
| 256 |
% environment that they apply to. \\ |
| 257 |
% ?\topcaption{...}? & A command to provide a caption for the |
| 258 |
% table. The caption is placed at the top |
| 259 |
% of the table. \\ |
| 260 |
% ?\bottomcaption{...}? & A command to provide a caption for the |
| 261 |
% table. The caption is placed at the bottom |
| 262 |
% of the table. \\ |
| 263 |
% ?\tablecaption{...}? & A command to provide a caption for the |
| 264 |
% table. The caption is placed at the default |
| 265 |
% position, which is at the top |
| 266 |
% of the table. |
| 267 |
% \\ |
| 268 |
% & |
| 269 |
% \textbf{Notes:} You cannot use the ?\caption? |
| 270 |
% command but you can put a label after |
| 271 |
% any of these captioning commands. If you |
| 272 |
% want captioning, the command must be specified |
| 273 |
% before the start of the supertabular environment. |
| 274 |
% \\ |
| 275 |
% & |
| 276 |
% The ?\...caption{}? command(s) remain |
| 277 |
% in effect until changed by another |
| 278 |
% ?\...caption? command. |
| 279 |
% \\ |
| 280 |
% ?\tablefirsthead{...}? & Defines the contents of the first occurence |
| 281 |
% of the tabular head. The tabular head is some |
| 282 |
% special treatment of the first row in the table. |
| 283 |
% This command is optional. |
| 284 |
% \\ |
| 285 |
% & |
| 286 |
% If used, the header must be closed by the |
| 287 |
% end of line command for tabulars (e.g., ?\\?). \\ |
| 288 |
% ?\tablehead{...}? & Defines the contents of the table head on |
| 289 |
% subsequent pages. |
| 290 |
% \\ |
| 291 |
% & |
| 292 |
% For example, you might want to note that |
| 293 |
% this is a continuation of the table on |
| 294 |
% the previous page, as well as repeating |
| 295 |
% any column headings that were given |
| 296 |
% at the start of the \Lenv{xtabular} by |
| 297 |
% ?\tablefirsthead?. |
| 298 |
% \\ |
| 299 |
% & |
| 300 |
% The header must be closed like the |
| 301 |
% ?\tablefirsthead? command. |
| 302 |
% \\ |
| 303 |
% ?\tablelasthead{...}? & Defines the contents of the table head |
| 304 |
% on the last page of the table. |
| 305 |
% \\ |
| 306 |
% & |
| 307 |
% For example, you might want to note that the table |
| 308 |
% is concluded on this page. |
| 309 |
% \\ |
| 310 |
% & |
| 311 |
% The header must be closed like the |
| 312 |
% ?\tablefirsthead? command. |
| 313 |
% \\ |
| 314 |
% ?\notablelasthead? & Switches off the last ?\tablelasthead?. |
| 315 |
% A ?\tablelasthead? stays in effect until |
| 316 |
% overwritten by a new ?\tablelasthead? |
| 317 |
% or cancelled by this command. |
| 318 |
% \\ |
| 319 |
% ?\tabletail{...}? & The contents of this command are inserted before |
| 320 |
% the (internal) ?\end{tabular}? on each page except |
| 321 |
% for the last page of the table. |
| 322 |
% \\ |
| 323 |
% & |
| 324 |
% For example, you might want to note that the |
| 325 |
% table is continued on the next page. |
| 326 |
% \\ |
| 327 |
% ?\tablelasttail{...}? & The contents of this command are inserted before |
| 328 |
% the final (internal) ?\end{tabular}? of the table. |
| 329 |
% \\ |
| 330 |
% & |
| 331 |
% For example, you might want to note that |
| 332 |
% this is where the table ends. |
| 333 |
% \\ |
| 334 |
% \end{xtabular} |
| 335 |
% \end{center} |
| 336 |
% \DeleteShortVerb{\?} |
| 337 |
% \MakeShortVerb{\|} |
| 338 |
% |
| 339 |
% As well as the \Lenv{xtabular} and \Lenv{mpxtabular} environments there |
| 340 |
% are the corresponding starred versions |
| 341 |
% (i.e., \Lenv{xtabular*} and \Lenv{mpxtabular*} for use in |
| 342 |
% two column mode where the table is meant to span both columns. |
| 343 |
% |
| 344 |
% Table~\ref{tab:xtab} was produced by code similar to the following: |
| 345 |
% \begin{verbatim} |
| 346 |
% \topcaption{The principal xtab package commands} \label{tab:xtab} |
| 347 |
% \tablefirsthead{\hline \multicolumn{1}{|c|}{\textbf{Command}} & |
| 348 |
% \multicolumn{1}{c|}{\textbf{Effect}} \\ \hline } |
| 349 |
% \tablehead{\multicolumn{2}{c}% |
| 350 |
% {{\captionsize\bfseries \tablename\ \thetable{} -- |
| 351 |
% continued from previous page}} \\ |
| 352 |
% \hline \multicolumn{1}{|c|}{\textbf{Command}} & |
| 353 |
% \multicolumn{1}{c|}{\textbf{Effect}} \\ \hline } |
| 354 |
% \tablelasthead{\multicolumn{2}{c}% |
| 355 |
% {{\captionsize\bfseries \tablename\ \thetable{} -- |
| 356 |
% concluded from previous page}} \\ |
| 357 |
% \hline \multicolumn{1}{|c|}{\textbf{Command}} & |
| 358 |
% \multicolumn{1}{c|}{\textbf{Effect}} \\ \hline } |
| 359 |
% \tabletail{\hline \multicolumn{2}{|r|}{{Continued on next page}} \\ \hline} |
| 360 |
% \tablelasttail{\hline \hline} |
| 361 |
% |
| 362 |
% \begin{center} |
| 363 |
% \begin{xtabular}{|l|p{0.5\textwidth}|} |
| 364 |
% \verb|\begin{xtabular}{...}| & This is equivalent to the normal |
| 365 |
% \verb|\begin{tabular}{...}| environment. |
| 366 |
% You supply the specification of the columns |
| 367 |
% just as for the normal \Lenv{tabular} environment. |
| 368 |
% \\ |
| 369 |
% & |
| 370 |
% All commands that can be used within a \Lenv{tabular} |
| 371 |
% environment can also be used within |
| 372 |
% the \Lenv{xtabular} environment. |
| 373 |
% \\ |
| 374 |
% & |
| 375 |
% Unlike the \Lenv{tabular} environment which prevents page breaking |
| 376 |
% within the tabular, the \Lenv{xtabular} allows page breaking, so that |
| 377 |
% tabulars can extend automatically across several pages. |
| 378 |
% ... ... ... |
| 379 |
% \verb|\tablelasttail{...}| & The contents of this command are inserted before |
| 380 |
% the final (internal) \verb|\end{tabular}| of the table. |
| 381 |
% \\ |
| 382 |
% & |
| 383 |
% For example, you might want to note that this is where |
| 384 |
% the table ends. |
| 385 |
% \\ |
| 386 |
% \end{xtabular} |
| 387 |
% \end{center} |
| 388 |
% \end{verbatim} |
| 389 |
% |
| 390 |
% The table is only broken between rows --- a row will not be split |
| 391 |
% across pages. This can lead to some bad page breaks, especially if |
| 392 |
% there are rows with a large vertical height (like some in Table~\ref{tab:xtab}). |
| 393 |
% It is best to keep rows not too tall. |
| 394 |
% |
| 395 |
% Unkike the \Lenv{table} environment which floats, an \Lenv{xtabular} |
| 396 |
% environment is typeset at the point in the document where the environment |
| 397 |
% is specified. It is best not to start an \Lenv{xtabular} too close to the |
| 398 |
% bottom of a page otherwise there might be an ugly page break. |
| 399 |
% |
| 400 |
% \DescribeMacro{\shrinkheight} |
| 401 |
% The command |
| 402 |
% |\shrinkheight{|\meta{length}|}| may be |
| 403 |
% used after the first |\\| in the table to modify the allowed |
| 404 |
% height of the table on that page. A positive \meta{length} decreases |
| 405 |
% the allowed space on the page and a negative \meta{length} increases |
| 406 |
% the allowed space. |
| 407 |
% |
| 408 |
% For example: \\ |
| 409 |
% |\shrinkheight{2\baselineskip}| decreases the space per page by |
| 410 |
% two lines. \\ |
| 411 |
% |\shrinkheight{-\baselineskip}| increases the space per page by |
| 412 |
% one line. \\ |
| 413 |
% Note that I have never tried using this command so I cannot comment |
| 414 |
% on its efficacy. Instead, I use the |
| 415 |
% |\xentrystretch| command when necessary. |
| 416 |
% |
| 417 |
% \DescribeMacro{\xentrystretch} |
| 418 |
% The command |\xentrystretch{|\meta{decimal-fraction}|}| can be used before |
| 419 |
% a table to modify the amount of vertical space apparently |
| 420 |
% consumed by each entry in the subsequent table(s). |
| 421 |
% The default is |\xentrystretch{0.1}| which |
| 422 |
% specifies a 10\% overestimate in the vertical space. Similarly, |
| 423 |
% |\xentrystretch{0.25}| will overestimate the space by 25\%. A different |
| 424 |
% value may be used for each table in order to eliminate, or at least reduce, |
| 425 |
% bad page breaks. Increasing the value causes fewer entries to be put on |
| 426 |
% a page, thus reducing the chance of \TeX{} putting in a page break before |
| 427 |
% the \Lpack{xtab} package is prepared for one. |
| 428 |
% |
| 429 |
% |
| 430 |
% You may specify the font used for the |
| 431 |
% |\tablehead| and |\tablelasthead| yourself. |
| 432 |
% |
| 433 |
% \textbf{Note:} Within ISO documents, captions shall |
| 434 |
% be in bold font. The \file{iso} class also provides |
| 435 |
% a command for |
| 436 |
% setting the size of the font used in captions, namely |
| 437 |
% |\captionsize|. The default value for this is set by the \file{iso} class. |
| 438 |
% For the curious, the default definition is: \\ |
| 439 |
% |\newcommand{\captionsize}{\normalsize}| |
| 440 |
% |
| 441 |
% \subsection{Options} |
| 442 |
% |
| 443 |
% The \Lpack{xtab} package has three options which control the amount of |
| 444 |
% information that is written to the \file{.log} file. The |
| 445 |
% options are: |
| 446 |
% \begin{enumerate} |
| 447 |
% \item The option \Lopt{errorshow} (the default) does not |
| 448 |
% write any extra information; |
| 449 |
% \item The option \Lopt{pageshow} writes information |
| 450 |
% about when and why \Lpack{xtab} decides to produce a new page; |
| 451 |
% \item The option \Lopt{debugshow}, which also includes |
| 452 |
% \Lopt{pageshow}, additionally writes information about each line |
| 453 |
% that is added to the table. |
| 454 |
% \end{enumerate} |
| 455 |
% |
| 456 |
% Under normal circumstances \Lpack{xtab} is used without invoking any |
| 457 |
% option. The \Lopt{pageshow} option may be useful when attempting to cure |
| 458 |
% a bad page break. The \Lopt{debugshow} option, as its name implies, is |
| 459 |
% principally of use to the \Lpack{xtab} developer. |
| 460 |
% |
| 461 |
% Independently of the options, the command |
| 462 |
% |\sstraceon| may be used at any |
| 463 |
% point in the document to turn on printing of \Lopt{debugshow} data. This |
| 464 |
% can be turned off later by the |\sstraceoff| |
| 465 |
% command, which will stop all \Lopt{\ldots show} printing. |
| 466 |
% |
| 467 |
% |
| 468 |
% \section{The implementation} \label{sec:xtab} |
| 469 |
% |
| 470 |
% The \Lpack{xtab} package provides an extension to the |
| 471 |
% \Lpack{supertabular} package |
| 472 |
% written by Johannes Braams and Theo |
| 473 |
% Jurriens.\footnote{\texttt{supertabular.sty}, version 4.1c, 7 November 1997.} |
| 474 |
% The major portion of the following documentation is taken from |
| 475 |
% \file{supertabular.dtx}. |
| 476 |
% The package is designed to be used with the \file{iso} class in addition |
| 477 |
% to the usual \file{article}, etc., classes. |
| 478 |
% |
| 479 |
% \changes{v2}{1997/11/30}{xtab updated from version 3.7 to version 4.1c of supertabular} |
| 480 |
% The extension provided here enables the |
| 481 |
% heading on the table on the last page to differ from those on earlier |
| 482 |
% pages of the table. The implementation of the extension is based |
| 483 |
% on ideas in David Carlisle's \Lpack{longtable} package. |
| 484 |
% The downside of the extension is that \LaTeX{} has to be run twice |
| 485 |
% if the document contains a |supertabular|. However, \LaTeX{} is usually |
| 486 |
% run at least twice for any but the simplest document in order to get |
| 487 |
% cross-references and Table of Contents, etc., resolved correctly. |
| 488 |
% |
| 489 |
% The current version of the extension also either cures or reduces |
| 490 |
% following |
| 491 |
% weaknesses in the \Lpack{supertabular} package.\footnote{Only the first |
| 492 |
% two of these have been recognised by the authors of \Lpack{supertabular}.} |
| 493 |
% \begin{enumerate} |
| 494 |
% \item Sometimes the top caption of a |supertabular| is printed on |
| 495 |
% one page and the body is printed on the following page(s). |
| 496 |
% That is, there is a lonely caption. |
| 497 |
% \item Sometimes the last page of a |supertabular| consists of an |
| 498 |
% empty table. That is, just the head and foot of the table are |
| 499 |
% printed. |
| 500 |
% \item If the number of lines in the first header for the table differs |
| 501 |
% from the number of lines in subsequent headers, then the |
| 502 |
% continuation pages of the table may be too short or, more |
| 503 |
% troubling, too long. |
| 504 |
% \end{enumerate} |
| 505 |
% |
| 506 |
% The first version of \Lpack{xtab} imported much of the code from the |
| 507 |
% supertabular package (version 3.7) but I found that this did not work |
| 508 |
% well because there were incompatible coded versions of supertabular |
| 509 |
% available on CTAN. Further, I |
| 510 |
% found that there were some problems with the original \file{supertabular} |
| 511 |
% code in any case.\footnote{I also found a bug in the 4.1b version which |
| 512 |
% the authors kindly fixed in version 4.1c.} |
| 513 |
% I have to make the assumption that other users may have dissimilar |
| 514 |
% or problematic versions, so include all the code here, and thus any errors |
| 515 |
% can now be laid at my door. |
| 516 |
% |
| 517 |
% The requirement for compatibilty with the \file{iso} class is |
| 518 |
% achieved by modifications to the |\ST@caption| command only. Effectively |
| 519 |
% this is orthogonal to the code required to implement the extension. |
| 520 |
% |
| 521 |
% Now for the code itself. As syntactic sugar, all new macros for the |
| 522 |
% extension have the prefix `PWST' to distinguish them from the original |
| 523 |
% macros. I have also denoted all extensions to the original |
| 524 |
% \Lpack{supertabular} by introducing them as \emph{Extension:}. |
| 525 |
% |
| 526 |
% Announce the name and version of the package, which requires \LaTeXe. |
| 527 |
% \begin{macrocode} |
| 528 |
%<*xtab> |
| 529 |
% \end{macrocode} |
| 530 |
% |
| 531 |
% \begin{macro}{\c@tracingst} |
| 532 |
% There are three options with the package which control the amount |
| 533 |
% of information written to the log file: |
| 534 |
% \begin{enumerate} |
| 535 |
% \item \Lopt{errorshow} (the default) no extra information |
| 536 |
% \item \Lopt{pageshow} writes information about page breaking |
| 537 |
% \item \Lopt{debugshow} adds information about each line that |
| 538 |
% is added to the tabular |
| 539 |
% \end{enumerate} |
| 540 |
% \changes{v2}{1997/11/30}{Added options to xtab} |
| 541 |
% \begin{macrocode} |
| 542 |
\newcount\c@tracingst |
| 543 |
\DeclareOption{errorshow}{\c@tracingst\z@} |
| 544 |
% \end{macrocode} |
| 545 |
% \emph{Extension:} The next line in the original code did not do what |
| 546 |
% the authors intended; the number should have been 3 rather than 2. |
| 547 |
% \begin{macrocode} |
| 548 |
%%%%\DeclareOption{pageshow}{\c@tracingst\tw@} |
| 549 |
\DeclareOption{pageshow}{\c@tracingst\thr@@} |
| 550 |
\DeclareOption{debugshow}{\c@tracingst5\relax} |
| 551 |
\ProcessOptions |
| 552 |
% \end{macrocode} |
| 553 |
% \end{macro} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% |
| 554 |
% |
| 555 |
% \begin{macro}{\if@topcaption} |
| 556 |
% \begin{macro}{\topcaption} |
| 557 |
% \begin{macro}{\bottomcaption} |
| 558 |
% The user-commands |\topcaption| and |\bottomcaption| set the |
| 559 |
% flag |@topcaption| to determine where to put the |
| 560 |
% tablecaption. The default is to put the caption on the top of |
| 561 |
% the table |
| 562 |
% \begin{macrocode} |
| 563 |
\newif\if@topcaption \@topcaptiontrue |
| 564 |
\def\topcaption{\@topcaptiontrue\tablecaption} |
| 565 |
\def\bottomcaption{\@topcaptionfalse\tablecaption} |
| 566 |
% \end{macrocode} |
| 567 |
% \end{macro} |
| 568 |
% \end{macro} |
| 569 |
% \end{macro} |
| 570 |
% |
| 571 |
% \begin{macro}{\PWST@thecaption} |
| 572 |
% \begin{macro}{\PWSTcapht} |
| 573 |
% \emph{Extension:} |\PWST@thecaption| is used to store |
| 574 |
% the text of the table's caption. The vertical space required by |
| 575 |
% a caption is stored in |\PWSTcapht|. |
| 576 |
% \changes{v2}{1997/11/30}{Added PWST@thecaption and PWSTcapht} |
| 577 |
% \begin{macrocode} |
| 578 |
\gdef\PWST@thecaption{} |
| 579 |
\newdimen\PWSTcapht |
| 580 |
% \end{macrocode} |
| 581 |
% \end{macro} |
| 582 |
% \end{macro} |
| 583 |
% |
| 584 |
% \begin{macro}{\tablecaption} |
| 585 |
% \begin{macro}{\@xtablecaption} |
| 586 |
% This command has to function exactly like |\caption| does except |
| 587 |
% it has to store its argument (and the optional argument) for |
| 588 |
% later processing \emph{within} the supertabular environment. |
| 589 |
% \begin{macrocode} |
| 590 |
\long\def\tablecaption{% |
| 591 |
\refstepcounter{table}\@dblarg{\@xtablecaption}} |
| 592 |
\long\def\@xtablecaption[#1]#2{% |
| 593 |
% \end{macrocode} |
| 594 |
% \emph{Extension:} I store the caption text for later measurement. |
| 595 |
% \begin{macrocode} |
| 596 |
\long\gdef\PWST@thecaption{#2}% |
| 597 |
% \end{macrocode} |
| 598 |
% Finish up with the original code. |
| 599 |
% \begin{macrocode} |
| 600 |
\long\gdef\@process@tablecaption{\ST@caption{table}[#1]{#2}}} |
| 601 |
\global\let\@process@tablecaption\relax |
| 602 |
% \end{macrocode} |
| 603 |
% \end{macro} |
| 604 |
% \end{macro} |
| 605 |
% |
| 606 |
% \begin{macro}{\ifST@star} |
| 607 |
% This switch is used in the internal macros to remember which |
| 608 |
% kind of environment was started. |
| 609 |
% \begin{macrocode} |
| 610 |
\newif\ifST@star |
| 611 |
% \end{macrocode} |
| 612 |
% \end{macro} |
| 613 |
% |
| 614 |
% \begin{macro}{\ifST@mp} |
| 615 |
% This flag is used in the internal macros to remember if the |
| 616 |
% tabular is to be put in a minipage. |
| 617 |
% \changes{v2}{1997/11/30}{Added ifST@mp} |
| 618 |
% \begin{macrocode} |
| 619 |
\newif\ifST@mp |
| 620 |
% \end{macrocode} |
| 621 |
% \end{macro} |
| 622 |
% |
| 623 |
% \begin{macro}{\ST@wd} |
| 624 |
% For the \Lenv{supertabular*} environment it is necessary to |
| 625 |
% store the intended width of the tabular. |
| 626 |
% \begin{macrocode} |
| 627 |
\newdimen\ST@wd |
| 628 |
% \end{macrocode} |
| 629 |
% \end{macro} |
| 630 |
% |
| 631 |
% \begin{macro}{\ST@rightskip} |
| 632 |
% \begin{macro}{\ST@leftskip} |
| 633 |
% \begin{macro}{\ST@parfillskip} |
| 634 |
% For the \Lenv{mpsupertabular} environments we need special versions |
| 635 |
% of |\leftskip|, |\rightskip| and |\parfillskip|. |
| 636 |
% \changes{v2}{1997/11/30}{Added ST@rightskip, ST@leftskip and ST@parfillskip} |
| 637 |
% \begin{macrocode} |
| 638 |
\newskip\ST@rightskip |
| 639 |
\newskip\ST@leftskip |
| 640 |
\newskip\ST@parfillskip |
| 641 |
% \end{macrocode} |
| 642 |
% \end{macro} |
| 643 |
% \end{macro} |
| 644 |
% \end{macro} |
| 645 |
% |
| 646 |
% \begin{macro}{\@initisotab} |
| 647 |
% Required for ISO class, and check if class loaded. |
| 648 |
% \changes{v2.2a}{2000/02/15}{Added \cs{@initisotab} command} |
| 649 |
% \begin{macrocode} |
| 650 |
\@ifundefined{@initisotab}{% |
| 651 |
\newcommand{\@initisotab}{}% |
| 652 |
\newif\ifinfloat}{\typeout{xtab using iso captions}} |
| 653 |
% \end{macrocode} |
| 654 |
% \end{macro} |
| 655 |
% |
| 656 |
% \begin{macro}{\ST@caption} |
| 657 |
% This is a redefinition of LaTeX's |\@caption|, |\@makecaption| is |
| 658 |
% called within a group so as not to return to |\normalsize| |
| 659 |
% globally. In the original a fix was made for the `feature' of the |
| 660 |
% |\@makecaption| of \file{article.sty} and friends that a caption |
| 661 |
% \emph{always} gets a |\vskip 10pt| at the top and \emph{none} |
| 662 |
% at the bottom; if a user |
| 663 |
% wants to precede his table with a caption this results in a |
| 664 |
% collision. This fix is not implemented here as I think it should |
| 665 |
% be done by the user modifying |\beforecaptionskip| and |\aftercaptionskip|. |
| 666 |
% |
| 667 |
% \emph{Extension:} The ISO captioning is also initialised. |
| 668 |
% |
| 669 |
% \begin{macrocode} |
| 670 |
\long\def\ST@caption#1[#2]#3{\par% |
| 671 |
\@initisotab |
| 672 |
\addcontentsline{\csname ext@#1\endcsname}{#1}% |
| 673 |
{\protect\numberline{% |
| 674 |
\csname the#1\endcsname}{\ignorespaces #2}}% |
| 675 |
\begingroup |
| 676 |
\@parboxrestore |
| 677 |
\normalsize |
| 678 |
%% \if@topcaption \vskip -10\p@ \fi |
| 679 |
\@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par |
| 680 |
%% \if@topcaption \vskip 10\p@ \fi |
| 681 |
\endgroup |
| 682 |
% \end{macrocode} |
| 683 |
% \emph{Extension:} The height of the caption is subtracted from the available |
| 684 |
% space on the page. |
| 685 |
% \changes{v2.3}{2000/04/09}{Subtracted caption height from available space in |
| 686 |
% \cs{ST@caption} } |
| 687 |
% \begin{macrocode} |
| 688 |
\global\advance\ST@pageleft -\PWSTcapht |
| 689 |
\ST@trace\tw@{Added caption. Space left for xtabular: \the\ST@pageleft}} |
| 690 |
% \end{macrocode} |
| 691 |
% \end{macro} |
| 692 |
% |
| 693 |
% \begin{macro}{\tablehead} |
| 694 |
% \begin{macro}{\tablefirsthead} |
| 695 |
% |
| 696 |
% |\tablehead| activates the new tabular |\cr| commands. |
| 697 |
% \changes{v2}{1997/11/30}{Using version 4.1b of tablehead} |
| 698 |
% \begin{macrocode} |
| 699 |
\newcommand\tablehead[1]{% |
| 700 |
\gdef\@tablehead{% |
| 701 |
\noalign{% |
| 702 |
\global\let\@savcr=\\% |
| 703 |
\global\let\\=\org@tabularcr}% |
| 704 |
#1% |
| 705 |
\noalign{\global\let\\=\@savcr}}} |
| 706 |
\tablehead{} |
| 707 |
\newcommand\tablefirsthead[1]{\gdef\@table@first@head{#1}} |
| 708 |
% \end{macrocode} |
| 709 |
% \end{macro} |
| 710 |
% \end{macro} |
| 711 |
% |
| 712 |
% \begin{macro}{\c@PWSTtable} |
| 713 |
% \begin{macro}{\PWSTlastpage} |
| 714 |
% \begin{macro}{\PWSTcurpage} |
| 715 |
% \begin{macro}{\PWSTpenultimate} |
| 716 |
% \begin{macro}{\PWSTtempc} |
| 717 |
% \begin{macro}{\PWSTlines} |
| 718 |
% \begin{macro}{\PWSThead} |
| 719 |
% \begin{macro}{\PWSTlasthead} |
| 720 |
% \emph{Extension:} These are counters for the supertabular extension. |
| 721 |
% \Lcount{c@PWSTtable} |
| 722 |
% counts the number of supertabulars in case one or more are not captioned. |
| 723 |
% \Lcount{PWSTlastpage} is a counter holding the number of pages that a |
| 724 |
% supertabular uses and \Lcount{PWSTpenultimate} is the penultimate page. |
| 725 |
% \Lcount{PWSTcurpage} counts the current number |
| 726 |
% of supertabular pages processed. \Lcount{PWSTtempc} is a scratch |
| 727 |
% counter for page processing. |
| 728 |
% \changes{v2}{1997/11/30}{Changed PWSToldpages to PWSTlastpage} |
| 729 |
% \changes{v2}{1997/11/30}{Added counters PWSTpenultimate, PWSTlines, PWSThead and PWSTlasthead} |
| 730 |
% \begin{macrocode} |
| 731 |
\newcounter{PWSTtable} |
| 732 |
\newcount\PWSTlastpage |
| 733 |
\newcount\PWSTpenultimate |
| 734 |
\newcount\PWSTcurpage |
| 735 |
\newcount\PWSTtempc |
| 736 |
% \end{macrocode} |
| 737 |
% \emph{Extension:} \Lcount{PWSTlines} is used to count the number of |
| 738 |
% supertabular entry |
| 739 |
% lines on a page. Estimates of the number of lines in the normal table |
| 740 |
% heading is held by \Lcount{PWSThead}, and similarly \Lcount{PWSTlasthead} |
| 741 |
% is for the number of lines in the last heading. |
| 742 |
% \begin{macrocode} |
| 743 |
\newcount\PWSTlines |
| 744 |
%%% \newcount\PWSThead |
| 745 |
%%% \newcount\PWSTlasthead |
| 746 |
% \end{macrocode} |
| 747 |
% \end{macro} |
| 748 |
% \end{macro} |
| 749 |
% \end{macro} |
| 750 |
% \end{macro} |
| 751 |
% \end{macro} |
| 752 |
% \end{macro} |
| 753 |
% \end{macro} |
| 754 |
% \end{macro} |
| 755 |
% |
| 756 |
% \begin{macro}{\iffirstcall} |
| 757 |
% \emph{Extension:} This is used by the extension code to flag if the presumed last |
| 758 |
% page overflows. If overflow occurs, then |firstcall| is set to false. |
| 759 |
% \changes{v2}{1997/11/30}{Added iffirstcall} |
| 760 |
% \begin{macrocode} |
| 761 |
\newif\iffirstcall |
| 762 |
% \end{macrocode} |
| 763 |
% \end{macro} |
| 764 |
% |
| 765 |
% \begin{macro}{\PWST@lastht} |
| 766 |
% \begin{macro}{\PWST@generalht} |
| 767 |
% \begin{macro}{\PWST@ht} |
| 768 |
% \emph{Extension:} The estimated height of a table header and tail (i.e., the height of |
| 769 |
% an empty table) for the last page of a supertabular is stored in |
| 770 |
% |\PWSTlastht|. Similarly, the corresponding height of an empty table on |
| 771 |
% a general page (neither the first nor the last) is stored in |
| 772 |
% |\PWSTgeneralht|. |\PWST@ht| is a scratch variable. |
| 773 |
% \changes{v2}{1997/11/30}{Added PWST@generalht, PWST@lastht and PWST@ht} |
| 774 |
% \begin{macrocode} |
| 775 |
\newdimen\PWST@lastht |
| 776 |
\newdimen\PWST@generalht |
| 777 |
\newdimen\PWST@ht |
| 778 |
% \end{macrocode} |
| 779 |
% \end{macro} |
| 780 |
% \end{macro} |
| 781 |
% \end{macro} |
| 782 |
% |
| 783 |
% \begin{macro}{\tablelasthead} |
| 784 |
% \begin{macro}{\@table@last@head} |
| 785 |
% \begin{macro}{\notablelasthead} |
| 786 |
% \emph{Extension:} |\tablelasthead| is the extension user command |
| 787 |
% to specify the heading for |
| 788 |
% the last page of a supertabular. The command |\notablelasthead| |
| 789 |
% switches off the last heading. This has to be used if a last headed |
| 790 |
% table precedes one that does not have a special last head. |
| 791 |
% \begin{macrocode} |
| 792 |
\newcommand{\tablelasthead}[1]{\gdef\@table@last@head{#1}} |
| 793 |
\newcommand{\notablelasthead}{\let\@table@last@head\relax} |
| 794 |
% \end{macrocode} |
| 795 |
% Now initialize these commands. |
| 796 |
% \begin{macrocode} |
| 797 |
\tablelasthead{} |
| 798 |
\notablelasthead |
| 799 |
% \end{macrocode} |
| 800 |
% \end{macro} |
| 801 |
% \end{macro} |
| 802 |
% \end{macro} |
| 803 |
% |
| 804 |
% \begin{macro}{\tabletail} |
| 805 |
% \begin{macro}{\tablelasttail} |
| 806 |
% |\tabletail| is the user command to specify the appearance of |
| 807 |
% the bottom of each tabular on a page. Special treatment is |
| 808 |
% given to the end of the supertabular via the |\tablelasttail| |
| 809 |
% command. |
| 810 |
% |
| 811 |
% If the user uses an extra amount of tabular-data (like |
| 812 |
% |\multicolumn|) in |\tabletail| \TeX\ starts looping because of |
| 813 |
% the definition of |\nextline|. So make |\\| act like just a |\cr| |
| 814 |
% inside this tail to prevent the loop. Save and restore the value |
| 815 |
% of |\\| |
| 816 |
% |
| 817 |
% \changes{v2}{1997/11/30}{tabletail revised to 4.1b version} |
| 818 |
% \changes{v2.1}{1998/4/13}{Added initialization of tablelasttail} |
| 819 |
% \begin{macrocode} |
| 820 |
\newcommand\tabletail[1]{% |
| 821 |
\gdef\@tabletail{% |
| 822 |
\noalign{% |
| 823 |
\global\let\@savcr=\\% |
| 824 |
\global\let\\=\org@tabularcr}% |
| 825 |
#1% |
| 826 |
\noalign{\global\let\\=\@savcr}}} |
| 827 |
\tabletail{} |
| 828 |
\newcommand\tablelasttail[1]{\gdef\@table@last@tail{#1}} |
| 829 |
\tablelasttail{} |
| 830 |
% \end{macrocode} |
| 831 |
% \end{macro} |
| 832 |
% \end{macro} |
| 833 |
% |
| 834 |
% \begin{macro}{\sttraceon} |
| 835 |
% \begin{macro}{\sttraceoff} |
| 836 |
% The original supertabular included a tracing mechanism to |
| 837 |
% follow the decisions supertabular made about page breaking. |
| 838 |
% This is now also used as a debugging mechanism for the |
| 839 |
% extension. |
| 840 |
% |
| 841 |
% \changes{v2}{1997/11/30}{Tracing revised} |
| 842 |
% \begin{macrocode} |
| 843 |
\newcommand\sttraceon{\c@tracingst5\relax} |
| 844 |
\newcommand\sttraceoff{\c@tracingst\z@} |
| 845 |
% \end{macrocode} |
| 846 |
% \end{macro} |
| 847 |
% \end{macro} |
| 848 |
% |
| 849 |
% \begin{macro}{\ST@trace} |
| 850 |
% A macro that gets the trace message as its argument |
| 851 |
% \changes{v2}{1997/11/30}{ST@trace revised to version 4.1b} |
| 852 |
% \begin{macrocode} |
| 853 |
\newcommand\ST@trace[2]{% |
| 854 |
\ifnum\c@tracingst>#1\relax |
| 855 |
\GenericWarning{(xtab)\@spaces\@spaces}{Package xtab: #2}% |
| 856 |
\fi} |
| 857 |
% \end{macrocode} |
| 858 |
% \end{macro} |
| 859 |
% |
| 860 |
% \begin{macro}{\ST@pageleft} |
| 861 |
% This register holds the estimate of the amount of space left over |
| 862 |
% on the current page. This is used in the decision when to start a |
| 863 |
% new page. |
| 864 |
% \begin{macrocode} |
| 865 |
\newdimen\ST@pageleft |
| 866 |
% \end{macrocode} |
| 867 |
% \end{macro} |
| 868 |
% |
| 869 |
% \begin{macro}{\shrinkheight} |
| 870 |
% \begin{macro}{\setSTheight} |
| 871 |
% |\shrinkheight| is a command to diminish the value of |
| 872 |
% |\ST@pageleft| if necessary. |
| 873 |
% |
| 874 |
% |\setSTheight| sets the value of |\ST@pageleft| if necessary. |
| 875 |
% |
| 876 |
% \changes{v2}{1997/30/11}{Added shrinkheight and setSTheight commands} |
| 877 |
% \begin{macrocode} |
| 878 |
\newcommand*\shrinkheight[1]{% |
| 879 |
\noalign{\global\advance\ST@pageleft-#1\relax}} |
| 880 |
\newcommand*\setSTheight[1]{% |
| 881 |
\noalign{\global\ST@pageleft=#1\relax}} |
| 882 |
% \end{macrocode} |
| 883 |
% \end{macro} |
| 884 |
% \end{macro} |
| 885 |
% |
| 886 |
% \begin{macro}{\xentrystretch} |
| 887 |
% \begin{macro}{\PWST@xentrystretch} |
| 888 |
% \emph{Extension:} Provide a user and internal command for fudging |
| 889 |
% the estimated space taken by a table entry. Initialise to 10\% increase. |
| 890 |
% \changes{v2.3}{2000/04/09}{Added \cs{xentrystretch} command} |
| 891 |
% \begin{macrocode} |
| 892 |
\newcommand{\xentrystretch}[1]{\def\PWST@xentrystretch{#1}} |
| 893 |
\xentrystretch{0.1} |
| 894 |
% \end{macrocode} |
| 895 |
% \end{macro} |
| 896 |
% \end{macro} |
| 897 |
% |
| 898 |
% |
| 899 |
% \begin{macro}{\ST@headht} |
| 900 |
% \begin{macro}{\ST@tailht} |
| 901 |
% The register |\ST@headht| holds the height of the first head of |
| 902 |
% a \Lenv{supertabular}. The register |\ST@tailht| holds the |
| 903 |
% height of the tail. |
| 904 |
% |
| 905 |
% \changes{v2}{1997/11/30}{ST@heightht and ST@tailht defined} |
| 906 |
% \begin{macrocode} |
| 907 |
\newdimen\ST@headht |
| 908 |
\newdimen\ST@tailht |
| 909 |
% \end{macrocode} |
| 910 |
% \end{macro} |
| 911 |
% \end{macro} |
| 912 |
% |
| 913 |
% \begin{macro}{\ST@pagesofar} |
| 914 |
% Register |\ST@pagesofar| stores the estimate of the amount of the |
| 915 |
% page already filled up. |
| 916 |
% \begin{macrocode} |
| 917 |
\newdimen\ST@pagesofar |
| 918 |
% \end{macrocode} |
| 919 |
% \end{macro} |
| 920 |
% |
| 921 |
% \begin{macro}{\ST@pboxht} |
| 922 |
% The measured (total) height of a parbox argument. |
| 923 |
% \begin{macrocode} |
| 924 |
\newdimen\ST@pboxht |
| 925 |
% \end{macrocode} |
| 926 |
% \end{macro} |
| 927 |
% |
| 928 |
% \begin{macro}{\ST@lineht} |
| 929 |
% \begin{macro}{\ST@stretchht} |
| 930 |
% \begin{macro}{\ST@prevht} |
| 931 |
% The estimated height of a normal line is stored in |\ST@lineht|. |
| 932 |
% The register |\ST@stretchht| is used to store the difference |
| 933 |
% between the normal line height and the line height when |\arraystretch| |
| 934 |
% has a non-standard value. This is used in the case when p-box |
| 935 |
% entries are added to the tabular. |\ST@prevht| stores the height |
| 936 |
% of the previous line to use it as an estimate for the height |
| 937 |
% of the next line. This is needed for a better estimate of when to |
| 938 |
% break the tabular. |
| 939 |
% \begin{macrocode} |
| 940 |
\newdimen\ST@lineht |
| 941 |
\newdimen\ST@stretchht |
| 942 |
\newdimen\ST@prevht |
| 943 |
% \end{macrocode} |
| 944 |
% \end{macro} |
| 945 |
% \end{macro} |
| 946 |
% \end{macro} |
| 947 |
% |
| 948 |
% \begin{macro}{\ST@toadd} |
| 949 |
% When a tabular row is ended with |\\[...]| we need to temporarily |
| 950 |
% store the optional argument in |\ST@toadd|. |
| 951 |
% \begin{macrocode} |
| 952 |
\newdimen\ST@toadd |
| 953 |
% \end{macrocode} |
| 954 |
% \end{macro} |
| 955 |
% |
| 956 |
% \begin{macro}{\ST@dimen} |
| 957 |
% A private scratch dimension register. |
| 958 |
% \begin{macrocode} |
| 959 |
\newdimen\ST@dimen |
| 960 |
% \end{macrocode} |
| 961 |
% \end{macro} |
| 962 |
% |
| 963 |
% \begin{macro}{\ST@pbox} |
| 964 |
% A box register to store the contents of a parbox. |
| 965 |
% \begin{macrocode} |
| 966 |
\newbox\ST@pbox |
| 967 |
|
| 968 |
% \end{macrocode} |
| 969 |
% \end{macro} |
| 970 |
% |
| 971 |
% |
| 972 |
% \begin{macro}{\ST@tabularcr} |
| 973 |
% \begin{macro}{\ST@xtabularcr} |
| 974 |
% \begin{macro}{\ST@argtabularcr} |
| 975 |
% These are redefinitions of |\@tabularcr| and |\@xtabularcr|. This |
| 976 |
% is needed to include |\ST@cr| in the definition of |
| 977 |
% |\@xtabularcr|. |
| 978 |
% |
| 979 |
% All redefined macros have names that are similar to the original |
| 980 |
% names, except with a leading `ST'. |
| 981 |
% \changes{v2.3e}{2010/02/06}{Allow calc use.} |
| 982 |
% \begin{macrocode} |
| 983 |
\def\ST@tabularcr{% |
| 984 |
{\ifnum0=`}\fi |
| 985 |
\@ifstar{\ST@xtabularcr}{\ST@xtabularcr}} |
| 986 |
\def\ST@xtabularcr{% |
| 987 |
\@ifnextchar[%] |
| 988 |
{\ST@argtabularcr}% |
| 989 |
{\ifnum0=`{\fi}\cr\ST@cr}} |
| 990 |
\def\ST@argtabularcr[#1]{% |
| 991 |
\ifnum0=`{\fi}% |
| 992 |
\setlength\@tempdima{#1}% |
| 993 |
\ifdim \@tempdima>\z@ |
| 994 |
\unskip\ST@xargarraycr{#1}% |
| 995 |
\else |
| 996 |
\ST@yargarraycr{#1}% |
| 997 |
\fi} |
| 998 |
% \end{macrocode} |
| 999 |
% \end{macro} |
| 1000 |
% \end{macro} |
| 1001 |
% \end{macro} |
| 1002 |
% |
| 1003 |
% |
| 1004 |
% \begin{macro}{\ST@xargarraycr} |
| 1005 |
% \begin{macro}{\ST@yargarraycr} |
| 1006 |
% \changes{v2.3e}{2010/02/06}{Allow calc use.} |
| 1007 |
% In this case we need to copy the value of the optional argument |
| 1008 |
% of |\\| in our private register |\ST@toadd|. |
| 1009 |
% \begin{macrocode} |
| 1010 |
\def\ST@xargarraycr#1{% |
| 1011 |
\setlength\@tempdima{#1}% |
| 1012 |
\advance\@tempdima \dp \@arstrutbox |
| 1013 |
\vrule \@height\z@ \@depth\@tempdima \@width\z@ \cr |
| 1014 |
\noalign{\setlength{\global\ST@toadd}{#1}}\ST@cr |
| 1015 |
} |
| 1016 |
% \end{macrocode} |
| 1017 |
% |
| 1018 |
% Here we need to insert |\ST@cr| |
| 1019 |
% \begin{macrocode} |
| 1020 |
\def\ST@yargarraycr#1{% |
| 1021 |
\cr\noalign{% |
| 1022 |
\setlength{\global\ST@toadd}{#1}% |
| 1023 |
\vskip\ST@toadd |
| 1024 |
}\ST@cr |
| 1025 |
} |
| 1026 |
% \end{macrocode} |
| 1027 |
% \end{macro} |
| 1028 |
% \end{macro} |
| 1029 |
% |
| 1030 |
% \begin{macro}{\ST@startpbox} |
| 1031 |
% The macros that deal with parbox columns need to be redefined, |
| 1032 |
% because we need to know the size of the parbox. |
| 1033 |
% \changes{v2}{1997/11/30}{ST@startpbox changed to 4.1b version} |
| 1034 |
% \changes{v2.3b}{2007/03/24}{Added \cs{setlength} to \cs{ST@startpbox} and |
| 1035 |
% \cs{ST@astartpbox} (courtesy of Heiko Oberdiek)} |
| 1036 |
% \begin{macrocode} |
| 1037 |
\def\ST@startpbox#1{% |
| 1038 |
% \end{macrocode} |
| 1039 |
% To achieve our goal we need to save the text in box. |
| 1040 |
% \begin{macrocode} |
| 1041 |
%%%% \setbox\ST@pbox\vtop\bgroup\hsize#1\@arrayparboxrestore} |
| 1042 |
\setbox\ST@pbox\vtop\bgroup\setlength\hsize{#1}\@arrayparboxrestore} |
| 1043 |
% \end{macrocode} |
| 1044 |
% \end{macro} |
| 1045 |
% |
| 1046 |
% \begin{macro}{\ST@astartpbox} |
| 1047 |
% \changes{v2.3e}{2010/02/06}{Allow calc use.} |
| 1048 |
% supertabular version of |\@astartpbox|. |
| 1049 |
% \begin{macrocode} |
| 1050 |
\def\ST@astartpbox#1{% |
| 1051 |
\bgroup\setlength\hsize{#1}% |
| 1052 |
%%%% \setbox\ST@pbox\vtop\bgroup\hsize#1\@arrayparboxrestore} |
| 1053 |
\setbox\ST@pbox\vtop\bgroup\setlength\hsize{#1}\@arrayparboxrestore} |
| 1054 |
% \end{macrocode} |
| 1055 |
% \end{macro} |
| 1056 |
% |
| 1057 |
% \begin{macro}{\ST@endpbox} |
| 1058 |
% \begin{macro}{\ST@aendpbox} |
| 1059 |
% supertabular versions of |\@endpbox| and |\@aendpbox|. |
| 1060 |
% \begin{macrocode} |
| 1061 |
\def\ST@endpbox{% |
| 1062 |
\@finalstrut\@arstrutbox\par\egroup |
| 1063 |
\ST@dimen=\ht\ST@pbox |
| 1064 |
\advance\ST@dimen by \dp\ST@pbox |
| 1065 |
\ifnum\ST@pboxht<\ST@dimen |
| 1066 |
\global\ST@pboxht=\ST@dimen |
| 1067 |
\fi |
| 1068 |
\ST@dimen=\z@ |
| 1069 |
\box\ST@pbox\hfil} |
| 1070 |
\def\ST@aendpbox{% |
| 1071 |
\@finalstrut\@arstrutbox\par\egroup |
| 1072 |
\ST@dimen=\ht\ST@pbox |
| 1073 |
\advance\ST@dimen by \dp\ST@pbox |
| 1074 |
\ifnum\ST@pboxht<\ST@dimen |
| 1075 |
\global\ST@pboxht=\ST@dimen |
| 1076 |
\fi |
| 1077 |
\ST@dimen=\z@ |
| 1078 |
\unvbox\ST@pbox\egroup\hfil} |
| 1079 |
% \end{macrocode} |
| 1080 |
% \end{macro} |
| 1081 |
% \end{macro} |
| 1082 |
% |
| 1083 |
% |
| 1084 |
% \begin{macro}{\estimate@lineht} |
| 1085 |
% Estimates the height of normal line taking |\arraystretch| into |
| 1086 |
% account. Also computes the difference between a `normal' line |
| 1087 |
% and a stretched one. |
| 1088 |
% \changes{v2.3}{2000/04/09}{Added fudge to \cs{estimate@lineht} } |
| 1089 |
% \begin{macrocode} |
| 1090 |
\def\estimate@lineht{% |
| 1091 |
\ST@lineht=\arraystretch \baselineskip |
| 1092 |
\global\advance\ST@lineht by 1\p@ |
| 1093 |
\ST@stretchht\ST@lineht\advance\ST@stretchht-\baselineskip |
| 1094 |
\ifdim\ST@stretchht<\z@\ST@stretchht\z@\fi |
| 1095 |
\ST@trace\tw@{Basic line height: \the\ST@lineht\MessageBreak% |
| 1096 |
Arrayed line height: \the\ST@stretchht}% |
| 1097 |
\global\advance\ST@lineht \PWST@xentrystretch\ST@lineht |
| 1098 |
\ST@trace\tw@{Stretched line height: \the\ST@lineht}} |
| 1099 |
% \end{macrocode} |
| 1100 |
% \end{macro} |
| 1101 |
% |
| 1102 |
% \begin{macro}{\@calfirstpageht} |
| 1103 |
% Estimates the space left on the current page and decides whether |
| 1104 |
% the tabular can be started on this page or on a new page. Aspects |
| 1105 |
% of the original code are modified for the extension. |
| 1106 |
% \begin{macrocode} |
| 1107 |
\def\@calfirstpageht{% |
| 1108 |
\ST@trace\tw@{Calculating height of xtabular on first page}% |
| 1109 |
% \end{macrocode} |
| 1110 |
% The \TeX{} register |\pagetotal| contains the height of the page |
| 1111 |
% sofar, the \LaTeX{} register |\@colroom| contains the height of |
| 1112 |
% the column. |
| 1113 |
% \begin{macrocode} |
| 1114 |
\global\ST@pagesofar\pagetotal |
| 1115 |
\global\ST@pageleft\@colroom |
| 1116 |
\ST@trace\tw@{Height of previous text = \the\pagetotal; \MessageBreak |
| 1117 |
Height of column = \the\ST@pageleft}% |
| 1118 |
% \end{macrocode} |
| 1119 |
% When we are in twocolumn mode \TeX{} may still be collecting |
| 1120 |
% material for the first column although there seems to be no space |
| 1121 |
% left. In this case we have to check against two times |\ST@pageleft|. |
| 1122 |
% \begin{macrocode} |
| 1123 |
\if@twocolumn |
| 1124 |
\ST@trace\tw@{two column mode}% |
| 1125 |
\if@firstcolumn |
| 1126 |
\ST@trace\tw@{First column}% |
| 1127 |
\ifnum\ST@pagesofar > \ST@pageleft |
| 1128 |
\global\ST@pageleft=2\ST@pageleft |
| 1129 |
\ifnum\ST@pagesofar > \ST@pageleft |
| 1130 |
\newpage\@calnextpageht |
| 1131 |
\ST@trace\tw@{starting new page}% |
| 1132 |
\else |
| 1133 |
% \end{macrocode} |
| 1134 |
% In this case we're in the second column, so we have to compensate |
| 1135 |
% for the material in the first column. |
| 1136 |
% \begin{macrocode} |
| 1137 |
\ST@trace\tw@{Second column}% |
| 1138 |
\global\advance\ST@pageleft -\ST@pagesofar |
| 1139 |
\global\advance\ST@pageleft -\@colroom |
| 1140 |
\fi |
| 1141 |
% \end{macrocode} |
| 1142 |
% When |\ST@pagesofar| is smaller than |\ST@pageleft| \TeX{} is still |
| 1143 |
% collecting material for the first column, so we can start a new |
| 1144 |
% tabular environment like we do on a single column page. |
| 1145 |
% \begin{macrocode} |
| 1146 |
\else |
| 1147 |
\global\advance\ST@pageleft by -\ST@pagesofar |
| 1148 |
\global\ST@pagesofar\z@ |
| 1149 |
\fi |
| 1150 |
\else |
| 1151 |
% \end{macrocode} |
| 1152 |
% When we end up here, \TeX{} has already decided it had enough |
| 1153 |
% material for the first column and is building the second column. |
| 1154 |
% \begin{macrocode} |
| 1155 |
\ST@trace\tw@{Second column}% |
| 1156 |
\ifnum\ST@pagesofar > \ST@pageleft |
| 1157 |
\ST@trace\tw@{starting new page}% |
| 1158 |
\newpage\@calnextpageht |
| 1159 |
\else |
| 1160 |
\global\advance\ST@pageleft by -\ST@pagesofar |
| 1161 |
\global\ST@pagesofar\z@ |
| 1162 |
\fi |
| 1163 |
\fi |
| 1164 |
\else |
| 1165 |
% \end{macrocode} |
| 1166 |
% In one column mode there is a simple decision. |
| 1167 |
% \begin{macrocode} |
| 1168 |
\ST@trace\tw@{one column mode}% |
| 1169 |
\ifnum\ST@pagesofar > \ST@pageleft |
| 1170 |
\ST@trace\tw@{starting new page}% |
| 1171 |
\newpage\@calnextpageht |
| 1172 |
% \end{macrocode} |
| 1173 |
% When we are not starting a new page subtract the size of the |
| 1174 |
% material already on it from the available space. |
| 1175 |
% \begin{macrocode} |
| 1176 |
\else |
| 1177 |
\global\advance\ST@pageleft by -\ST@pagesofar |
| 1178 |
\global\ST@pagesofar\z@ |
| 1179 |
\fi |
| 1180 |
\fi |
| 1181 |
\ST@trace\tw@{Available height: \the\ST@pageleft}% |
| 1182 |
% \end{macrocode} |
| 1183 |
% Now we need to know the height of the head of the table. In order |
| 1184 |
% to measure this we typeset it in a normal \Lenv{tabular} environment. |
| 1185 |
% \begin{macrocode} |
| 1186 |
\ifx\@@tablehead\@empty |
| 1187 |
\ST@headht=\z@ |
| 1188 |
\else |
| 1189 |
\setbox\@tempboxa=\vbox{\@arrayparboxrestore |
| 1190 |
\ST@restore |
| 1191 |
\expandafter\tabular\expandafter{\ST@tableformat}% |
| 1192 |
\@@tablehead\endtabular}% |
| 1193 |
\ST@headht=\ht\@tempboxa\advance\ST@headht\dp\@tempboxa |
| 1194 |
\fi |
| 1195 |
\ST@trace\tw@{Height of head: \the\ST@headht}% |
| 1196 |
% \end{macrocode} |
| 1197 |
% To decide when to start a new page, we need to know the vertical |
| 1198 |
% size of the tail of the table. |
| 1199 |
% \begin{macrocode} |
| 1200 |
\ifx\@tabletail\@empty |
| 1201 |
\ST@tailht=\z@ |
| 1202 |
\else |
| 1203 |
\setbox\@tempboxa=\vbox{\@arrayparboxrestore |
| 1204 |
\ST@restore |
| 1205 |
\expandafter\tabular\expandafter{\ST@tableformat}% |
| 1206 |
\@tabletail\endtabular}% |
| 1207 |
\ST@tailht=\ht\@tempboxa\advance\ST@tailht\dp\@tempboxa |
| 1208 |
\fi |
| 1209 |
% \end{macrocode} |
| 1210 |
% We add the average height of a line to this because when we |
| 1211 |
% decide to continue the tabular we need to have enough space left |
| 1212 |
% for one line and the tail. |
| 1213 |
% \begin{macrocode} |
| 1214 |
\advance\ST@tailht by \ST@lineht |
| 1215 |
\ST@trace\tw@{Height of tail: \the\ST@tailht}% |
| 1216 |
% \end{macrocode} |
| 1217 |
% \begin{macrocode} |
| 1218 |
\ST@trace\tw@{Maximum space for xtabular: \the\ST@pageleft}% |
| 1219 |
% \end{macrocode} |
| 1220 |
% Now we decide whether we can continue on the current page or |
| 1221 |
% whether we need to start a new page. We assume that the minimum |
| 1222 |
% height of a tabular is the height of the head and tail and one line |
| 1223 |
% of data. If that doesn't fit, start a new page. |
| 1224 |
% \begin{macrocode} |
| 1225 |
\@tempdima\ST@headht |
| 1226 |
\advance\@tempdima\ST@lineht |
| 1227 |
\advance\@tempdima\ST@tailht |
| 1228 |
% \end{macrocode} |
| 1229 |
% \emph{Extension:} I also add the height of the caption to the required |
| 1230 |
% space. The amount to be added depends on whether it is a top or bottom |
| 1231 |
% caption. Allowance is also made for skips around the caption. |
| 1232 |
% \begin{macrocode} |
| 1233 |
\if@topcaption |
| 1234 |
\setbox\@tempboxa=\vbox{\PWST@thecaption}% |
| 1235 |
\PWSTcapht=\ht\@tempboxa\advance\PWSTcapht\dp\@tempboxa |
| 1236 |
\advance\PWSTcapht by 20\p@ |
| 1237 |
\else |
| 1238 |
\PWSTcapht = 10\p@ |
| 1239 |
\fi |
| 1240 |
\ST@trace\tw@{Caption height: \the\PWSTcapht}% |
| 1241 |
\advance\@tempdima\PWSTcapht |
| 1242 |
% \end{macrocode} |
| 1243 |
% Continue with the original code. |
| 1244 |
% \begin{macrocode} |
| 1245 |
\ST@trace\tw@{Minimum height of xtabular: \the\@tempdima}% |
| 1246 |
\ifnum\@tempdima>\ST@pageleft |
| 1247 |
\ST@trace\tw@{starting new page}% |
| 1248 |
% \end{macrocode} |
| 1249 |
% \emph{Extension:} The next line in the original code is |
| 1250 |
% |\newpage\@calnextpageht|. I need to start a new page, making allowance |
| 1251 |
% for the space required by the caption. |
| 1252 |
% \begin{macrocode} |
| 1253 |
\newpage |
| 1254 |
\global\ST@pageleft\@colroom |
| 1255 |
\global\advance\ST@pageleft by -\PWSTcapht |
| 1256 |
\global\ST@pagesofar=\z@ |
| 1257 |
% \end{macrocode} |
| 1258 |
% Finish up with the original code. |
| 1259 |
% \begin{macrocode} |
| 1260 |
\fi} % end \@calfirstpageheight |
| 1261 |
|
| 1262 |
% \end{macrocode} |
| 1263 |
% \end{macro} |
| 1264 |
% |
| 1265 |
% \begin{macro}{\@calnextpageht} |
| 1266 |
% This calculates the maximum height of the tabular on all |
| 1267 |
% subsequent pages of the supertabular environment. |
| 1268 |
% \begin{macrocode} |
| 1269 |
\def\@calnextpageht{% |
| 1270 |
\ST@trace\tw@{Calculating height of xtabular on next page}% |
| 1271 |
\global\ST@pageleft\@colroom |
| 1272 |
\global\ST@pagesofar=\z@ |
| 1273 |
\ST@trace\tw@{Maximum space for xtabular: \the\ST@pageleft}} |
| 1274 |
% \end{macrocode} |
| 1275 |
% \end{macro} |
| 1276 |
% |
| 1277 |
% \begin{macro}{\PWSTcalchtlines} |
| 1278 |
% \emph{Extension:} A macro to calculate the space required by an empty table |
| 1279 |
% and the number of lines in an empty table. |
| 1280 |
% \changes{v2.3}{2000/04/09}{Don't calculate number of head/tail lines} |
| 1281 |
% |
| 1282 |
% The appropriate heads and tails are typeset in a temporary box |
| 1283 |
% so we can measure them. |
| 1284 |
% \changes{v2}{1997/11/30}{Added PWSTcalchtlines routine} |
| 1285 |
% \begin{macrocode} |
| 1286 |
\newcommand{\PWSTcalchtlines}{% |
| 1287 |
% \end{macrocode} |
| 1288 |
% Measure the lasttail. |
| 1289 |
% \begin{macrocode} |
| 1290 |
\setbox\@tempboxa=\vbox{\@arrayparboxrestore |
| 1291 |
\ST@restore |
| 1292 |
\expandafter\tabular\expandafter{\ST@tableformat}% |
| 1293 |
\@table@last@tail\endtabular}% |
| 1294 |
\PWST@ht=\ht\@tempboxa\advance\PWST@ht\dp\@tempboxa |
| 1295 |
\global\PWST@lastht = \PWST@ht |
| 1296 |
% \end{macrocode} |
| 1297 |
% And repeat for the lasthead. |
| 1298 |
% \begin{macrocode} |
| 1299 |
\setbox\@tempboxa=\vbox{\@arrayparboxrestore |
| 1300 |
\ST@restore |
| 1301 |
\expandafter\tabular\expandafter{\ST@tableformat}% |
| 1302 |
\@table@last@head\endtabular}% |
| 1303 |
\PWST@ht = \ht\@tempboxa\advance\PWST@ht\dp\@tempboxa |
| 1304 |
\global\advance\PWST@lastht by \PWST@ht |
| 1305 |
\ST@trace\tw@{Height of empty xtabular on last page = \the\PWST@lastht}% |
| 1306 |
% \end{macrocode} |
| 1307 |
% Now repeat pretty well all of the above for a general table (i.e., |
| 1308 |
% one that is not on the first page nor the designated last page). |
| 1309 |
% |
| 1310 |
% First the tail. |
| 1311 |
% \begin{macrocode} |
| 1312 |
\setbox\@tempboxa=\vbox{\@arrayparboxrestore |
| 1313 |
\ST@restore |
| 1314 |
\expandafter\tabular\expandafter{\ST@tableformat}% |
| 1315 |
\@tabletail\endtabular}% |
| 1316 |
\PWST@ht=\ht\@tempboxa\advance\PWST@ht\dp\@tempboxa |
| 1317 |
\global\PWST@generalht = \PWST@ht |
| 1318 |
% \end{macrocode} |
| 1319 |
% And on to the general head. |
| 1320 |
% \begin{macrocode} |
| 1321 |
\setbox\@tempboxa=\vbox{\@arrayparboxrestore |
| 1322 |
\ST@restore |
| 1323 |
\expandafter\tabular\expandafter{\ST@tableformat}% |
| 1324 |
\@tablehead\endtabular}% |
| 1325 |
\PWST@ht = \ht\@tempboxa\advance\PWST@ht\dp\@tempboxa |
| 1326 |
\global\advance\PWST@generalht by \PWST@ht} |
| 1327 |
% \end{macrocode} |
| 1328 |
% \end{macro} |
| 1329 |
% |
| 1330 |
% \begin{macro}{\PWSTcalnextpageht} |
| 1331 |
% \emph{Extension:} From some experiments that I ran it appeared as |
| 1332 |
% though the \Lpack{supertabular} package ignored the |
| 1333 |
% possibility that the |
| 1334 |
% space required for the table header and tail on pages after the |
| 1335 |
% first one might be different. If the subsequent head/tail combination |
| 1336 |
% were longer (i.e., took more vertical space) then the table could |
| 1337 |
% overflow the page. This is an attempt to fix this problem by |
| 1338 |
% calculating the actual minimum space required after the first page. |
| 1339 |
% |
| 1340 |
% The calculations are similar to, but simpler, than those for |
| 1341 |
% |\@calfirstpageht|. |
| 1342 |
% \changes{v2}{1997/11/30}{Added PWSTcalnextpageht routine} |
| 1343 |
% \begin{macrocode} |
| 1344 |
\newcommand{\PWSTcalnextpageht}{% |
| 1345 |
\ifnum\PWSTcurpage = \PWSTpenultimate |
| 1346 |
\ST@trace\tw@{Calculating height of xtabular on last page}% |
| 1347 |
% \end{macrocode} |
| 1348 |
% We are on the penultimate page, so get the height of the |
| 1349 |
% last head/tail. |
| 1350 |
% \begin{macrocode} |
| 1351 |
\PWST@ht=\PWST@lastht |
| 1352 |
% \end{macrocode} |
| 1353 |
% Otherwise I need the general page data. |
| 1354 |
% \begin{macrocode} |
| 1355 |
\else |
| 1356 |
\ST@trace\tw@{Calculating height of xtabular on next general page}% |
| 1357 |
\PWST@ht=\PWST@generalht |
| 1358 |
\fi |
| 1359 |
% \end{macrocode} |
| 1360 |
% Having dealt with the two cases, I can now calculate the minimum |
| 1361 |
% space for a supertabular on the following page. |
| 1362 |
% \begin{macrocode} |
| 1363 |
\global\ST@pageleft\@colroom |
| 1364 |
\global\advance\ST@pageleft -\PWST@ht |
| 1365 |
\global\ST@pagesofar=\z@ |
| 1366 |
\ST@trace\tw@{Available space for xtabular: \the\ST@pageleft}} |
| 1367 |
% \end{macrocode} |
| 1368 |
% \end{macro} |
| 1369 |
% |
| 1370 |
% \begin{macro}{\x@supertabular} |
| 1371 |
% The various supertabular environments share a lot of code. Thus, |
| 1372 |
% to avoid needless repetition, the shared code is defined |
| 1373 |
% in this macro. |
| 1374 |
% |
| 1375 |
% This macro has been modified as part of the supertabular extension. |
| 1376 |
% \begin{macrocode} |
| 1377 |
\def\x@supertabular{% |
| 1378 |
% \end{macrocode} |
| 1379 |
% First save the original definition of |\tabular| and then make it |
| 1380 |
% point to |\inner@tabular|. This is done to enable supertabular |
| 1381 |
% cells to contain a \Lenv{tabular} environment without getting |
| 1382 |
% unexpected results when the \Lenv{supertabular} would be split |
| 1383 |
% across this inner \Lenv{tabular} environment. |
| 1384 |
% \begin{macrocode} |
| 1385 |
\let\org@tabular\tabular |
| 1386 |
\let\tabular\inner@tabular |
| 1387 |
% \end{macrocode} |
| 1388 |
% The same has to be done for the \Lenv{tabular*} environment. The |
| 1389 |
% coding is more verbose. |
| 1390 |
% \begin{macrocode} |
| 1391 |
\expandafter\let |
| 1392 |
\csname org@tabular*\expandafter\endcsname |
| 1393 |
\csname tabular*\endcsname |
| 1394 |
\expandafter\let\csname tabular*\expandafter\endcsname |
| 1395 |
\csname inner@tabular*\endcsname |
| 1396 |
% \end{macrocode} |
| 1397 |
% \emph{Extension:} The original code printed out the top caption |
| 1398 |
% at this point. If there is too little space on the first page of |
| 1399 |
% the table, the tabular data is printed on the following page. |
| 1400 |
% If this is the case (and its not known yet whether it is), then |
| 1401 |
% the caption should also be printed on the following page. |
| 1402 |
% \begin{macrocode} |
| 1403 |
%%%% \if@topcaption \@process@tablecaption \fi |
| 1404 |
% \end{macrocode} |
| 1405 |
% Back to the original code. Save the original definition of |\\|. |
| 1406 |
% \begin{macrocode} |
| 1407 |
\global\let\@oldcr=\\% |
| 1408 |
% \end{macrocode} |
| 1409 |
% Save the current value of |\baselineskip|, as we need it in the |
| 1410 |
% calculation of the average height of a line. |
| 1411 |
% \begin{macrocode} |
| 1412 |
\def\baslineskp{\baselineskip}% |
| 1413 |
% \end{macrocode} |
| 1414 |
% We have to check whether \texttt{array.sty} was loaded, because |
| 1415 |
% some of the internal macros have different names. |
| 1416 |
% \begin{macrocode} |
| 1417 |
\ifx\undefined\@classix |
| 1418 |
% \end{macrocode} |
| 1419 |
% Save old |\@tabularcr| and insert the definition of |
| 1420 |
% |\@stabularcr|. |
| 1421 |
% \begin{macrocode} |
| 1422 |
\let\org@tabularcr\@tabularcr |
| 1423 |
\let\@tabularcr\ST@tabularcr |
| 1424 |
% \end{macrocode} |
| 1425 |
% Activate the new parbox algorithm. |
| 1426 |
% \begin{macrocode} |
| 1427 |
\let\org@startpbox=\@startpbox |
| 1428 |
\let\org@endpbox=\@endpbox |
| 1429 |
\let\@@startpbox=\ST@startpbox |
| 1430 |
\let\@@endpbox=\ST@endpbox |
| 1431 |
\else |
| 1432 |
% \end{macrocode} |
| 1433 |
% When \texttt{array.sty} was loaded things are a bit different. |
| 1434 |
% \begin{macrocode} |
| 1435 |
\let\org@tabularcr\@arraycr |
| 1436 |
\let\@arraycr\ST@tabularcr |
| 1437 |
\let\org@startpbox=\@startpbox |
| 1438 |
\let\org@endpbox=\@endpbox |
| 1439 |
\let\@startpbox=\ST@astartpbox |
| 1440 |
\let\@endpbox=\ST@aendpbox |
| 1441 |
\fi |
| 1442 |
% \end{macrocode} |
| 1443 |
% |
| 1444 |
% Check if the head of the table should be different for the first |
| 1445 |
% and subsequent pages. |
| 1446 |
% \begin{macrocode} |
| 1447 |
\ifx\@table@first@head\undefined |
| 1448 |
\let\@@tablehead=\@tablehead |
| 1449 |
\else |
| 1450 |
\let\@@tablehead=\@table@first@head |
| 1451 |
\fi |
| 1452 |
% \end{macrocode} |
| 1453 |
% The first part of a supertabular may be moved to the next page |
| 1454 |
% if it doesn't fit on the current page. Subsequent parts can not |
| 1455 |
% be moved; therefore we will have to switch the definition of |
| 1456 |
% |\ST@skippart| around. |
| 1457 |
% \begin{macrocode} |
| 1458 |
\let\ST@skippage\ST@skipfirstpart |
| 1459 |
% \end{macrocode} |
| 1460 |
% Now we can estimate the average line height and the height |
| 1461 |
% of the first page of the supertabular. |
| 1462 |
% \begin{macrocode} |
| 1463 |
\estimate@lineht |
| 1464 |
\@calfirstpageht |
| 1465 |
% \end{macrocode} |
| 1466 |
% \emph{Extension:} Call the macro to initialize the extension code for |
| 1467 |
% this table. |
| 1468 |
% \begin{macrocode} |
| 1469 |
\PWSTinit |
| 1470 |
% \end{macrocode} |
| 1471 |
% \emph{Extension:} At this point I know, and have adjusted for, the |
| 1472 |
% page on which the first part of the table will be printed. It should now |
| 1473 |
% be safe to print the top caption, if any. Unfortunately, in spite of |
| 1474 |
% everthing, the \TeX{} page breaking |
| 1475 |
% mechanism might still think that there is too little space left. |
| 1476 |
% \begin{macrocode} |
| 1477 |
\if@topcaption \@process@tablecaption \fi |
| 1478 |
\noindent |
| 1479 |
% \end{macrocode} |
| 1480 |
% \emph{Extension:} Finally, subtract the space required by the header |
| 1481 |
% and the tail (as these don't update the available space when output). |
| 1482 |
% \changes{v2.3}{2000/04/09}{Subtracted head/tail space in \cs{x@supertabular} } |
| 1483 |
% \begin{macrocode} |
| 1484 |
\global\advance\ST@pageleft -\ST@headht% |
| 1485 |
\ST@trace\tw@{Available space after accounting for header: \the\ST@pageleft}% |
| 1486 |
\global\advance\ST@pageleft -\ST@tailht% |
| 1487 |
\ST@trace\tw@{Available space after accounting for tail: \the\ST@pageleft}} |
| 1488 |
% \end{macrocode} |
| 1489 |
% \end{macro} |
| 1490 |
% |
| 1491 |
% \begin{macro}{\PWSTinit} |
| 1492 |
% \emph{Extension:} This routine initialises the extension data. |
| 1493 |
% \changes{v2}{1997/11/30}{Added PWSTinit routine} |
| 1494 |
% \begin{macrocode} |
| 1495 |
\newcommand{\PWSTinit}{% |
| 1496 |
% \end{macrocode} |
| 1497 |
% At the end of processing each supertabular (see later) the number of |
| 1498 |
% pages consumed by the supertabular is written to the \file{.aux} file. |
| 1499 |
% At the start of a supertabular, after incrementing the number of |
| 1500 |
% supertabulars processed, the prior number of pages are read from |
| 1501 |
% the file. These are stored in \Lcount{PWSTlastpage}. |
| 1502 |
% \begin{macrocode} |
| 1503 |
\global\advance\c@PWSTtable\@ne |
| 1504 |
\global\expandafter\let\expandafter\PWSTtempc |
| 1505 |
\csname PWST@\romannumeral\c@PWSTtable\endcsname |
| 1506 |
% \end{macrocode} |
| 1507 |
% I have to take account of the fact that there might be no entry in |
| 1508 |
% the \file{.aux} file, and hence the lastpage number might not be set. |
| 1509 |
% \begin{macrocode} |
| 1510 |
\ifx\PWSTtempc\relax |
| 1511 |
\ST@trace\tw@{Table \the\c@PWSTtable: Processing for the first time}% |
| 1512 |
\PWSTlastpage=\@m% = 1000 |
| 1513 |
\else |
| 1514 |
\PWSTlastpage=\PWSTtempc |
| 1515 |
\fi |
| 1516 |
\ST@trace\tw@{Table \the\c@PWSTtable: last page set to \the\PWSTlastpage}% |
| 1517 |
% \end{macrocode} |
| 1518 |
% Set the current page counter to unity. |
| 1519 |
% \begin{macrocode} |
| 1520 |
\PWSTcurpage=\@ne |
| 1521 |
% \end{macrocode} |
| 1522 |
% Perform the calculations for the empty table data. |
| 1523 |
% \begin{macrocode} |
| 1524 |
\PWSTcalchtlines |
| 1525 |
% \end{macrocode} |
| 1526 |
% Initialise the line counter and set |firstcall| to TRUE. |
| 1527 |
% \begin{macrocode} |
| 1528 |
\global\PWSTlines=\z@ |
| 1529 |
\global\firstcalltrue |
| 1530 |
% \end{macrocode} |
| 1531 |
% If we have the \file{iso} class, then I have to flag that we are |
| 1532 |
% in a `float'. |
| 1533 |
% \changes{v2}{1997/12/02}{Added setting of \cs{ifinfloat}} |
| 1534 |
% \begin{macrocode} |
| 1535 |
\infloattrue} |
| 1536 |
% \end{macrocode} |
| 1537 |
% \end{macro} |
| 1538 |
% |
| 1539 |
% \begin{macro}{\xtabular} |
| 1540 |
% We start by looking for an optional argument, which will be duly |
| 1541 |
% ignored as it seems to make no sense to try to align a multipage |
| 1542 |
% table in the middle... |
| 1543 |
% |
| 1544 |
% \emph{Extension:} Use \Lenv{xtabular} instead of \Lenv{supertabular}, |
| 1545 |
% and similarly for the others, so this will |
| 1546 |
% not be mentioned explicitly again. |
| 1547 |
% \begin{macrocode} |
| 1548 |
\def\xtabular{% |
| 1549 |
\@ifnextchar[{\@supertabular}%] |
| 1550 |
{\@supertabular[]}} |
| 1551 |
% \end{macrocode} |
| 1552 |
% \end{macro} |
| 1553 |
% |
| 1554 |
% \begin{macro}{\@supertabular} |
| 1555 |
% We can now save the preamble of the tabular in a macro. |
| 1556 |
% \begin{macrocode} |
| 1557 |
\def\@supertabular[#1]#2{% |
| 1558 |
\def\ST@tableformat{#2}% |
| 1559 |
\ST@trace\tw@{Starting a new xtabular}% |
| 1560 |
% \end{macrocode} |
| 1561 |
% Then remember that this is not a \textsf{supertabular*} |
| 1562 |
% environment. |
| 1563 |
% \begin{macrocode} |
| 1564 |
\global\ST@starfalse |
| 1565 |
% \end{macrocode} |
| 1566 |
% Don't use minipages. |
| 1567 |
% \begin{macrocode} |
| 1568 |
\global\ST@mpfalse |
| 1569 |
% \end{macrocode} |
| 1570 |
% Most of the following code is shared between the |
| 1571 |
% \Lenv{supertabbular} and \Lenv{supertabular*} environments. So to |
| 1572 |
% avoid duplication it is stored in a macro. |
| 1573 |
% \begin{macrocode} |
| 1574 |
\x@supertabular |
| 1575 |
% \end{macrocode} |
| 1576 |
% Finally start a normal \Lenv{tabular} environment. |
| 1577 |
% \begin{macrocode} |
| 1578 |
\expandafter\org@tabular\expandafter{\ST@tableformat}% |
| 1579 |
\@@tablehead} |
| 1580 |
% \end{macrocode} |
| 1581 |
% \end{macro} |
| 1582 |
% |
| 1583 |
% \begin{macro}{\xtabular*} |
| 1584 |
% We start by looking for the optional argument of the tabular |
| 1585 |
% environment. |
| 1586 |
% \begin{macrocode} |
| 1587 |
\@namedef{xtabular*}#1{% |
| 1588 |
\@ifnextchar[{\@nameuse{@supertabular*}{#1}}% |
| 1589 |
{\@nameuse{@supertabular*}{#1}[]}%] |
| 1590 |
} |
| 1591 |
% \end{macrocode} |
| 1592 |
% We start by saving the intended width and the preamble of the |
| 1593 |
% \Lenv{tabular*}. |
| 1594 |
% \begin{macrocode} |
| 1595 |
\@namedef{@supertabular*}#1[#2]#3{% |
| 1596 |
\ST@trace\tw@{Starting a new xtabular*}% |
| 1597 |
\def\ST@tableformat{#3}% |
| 1598 |
\ST@wd=#1\relax |
| 1599 |
\global\ST@startrue |
| 1600 |
\global\ST@mpfalse |
| 1601 |
% \end{macrocode} |
| 1602 |
% Now we can call the common code for both environments. |
| 1603 |
% \begin{macrocode} |
| 1604 |
\x@supertabular |
| 1605 |
% \end{macrocode} |
| 1606 |
% And we can start a normal \Lenv{tabular*} environment. |
| 1607 |
% \begin{macrocode} |
| 1608 |
\expandafter\csname org@tabular*\expandafter\endcsname |
| 1609 |
\expandafter{\expandafter\ST@wd\expandafter}% |
| 1610 |
\expandafter{\ST@tableformat}% |
| 1611 |
\@@tablehead} |
| 1612 |
% \end{macrocode} |
| 1613 |
% \end{macro} |
| 1614 |
% |
| 1615 |
% \begin{macro}{\mpxtabular} |
| 1616 |
% This version of the supertabular environment puts each tabular into |
| 1617 |
% a minipage, thus making footnotes possible. We start by looking for |
| 1618 |
% an optional argument, which will be ignored as it makes no sense |
| 1619 |
% to try and align a multipage table in the middle\ldots |
| 1620 |
% \changes{v2}{1997/11/30}{Added the mpsupertabular} |
| 1621 |
% \begin{macrocode} |
| 1622 |
\def\mpxtabular{% |
| 1623 |
\@ifnextchar[{\@mpsupertabular}%] |
| 1624 |
{\@mpsupertabular[]}} |
| 1625 |
% \end{macrocode} |
| 1626 |
% |
| 1627 |
% We can now save the preamble in a macro. |
| 1628 |
% \begin{macrocode} |
| 1629 |
\def\@mpsupertabular[#1]#2{% |
| 1630 |
\def\ST@tableformat{#2}% |
| 1631 |
\ST@trace\tw@{Starting a new mpxtabular}% |
| 1632 |
% \end{macrocode} |
| 1633 |
% Remember that this is not a \Lenv{mpsupertabular*} environment |
| 1634 |
% and also note we have to close the minipage later. |
| 1635 |
% \begin{macrocode} |
| 1636 |
\global\ST@starfalse |
| 1637 |
\global\ST@mptrue |
| 1638 |
% \end{macrocode} |
| 1639 |
% Since we are about to start a minipage of |\columnwidth| the |
| 1640 |
% horizontal alignment will not work. We have to remember the values |
| 1641 |
% and then restore them inside the minipage. |
| 1642 |
% \begin{macrocode} |
| 1643 |
\ST@rightskip \rightskip |
| 1644 |
\ST@leftskip \leftskip |
| 1645 |
\ST@parfillskip \parfillskip |
| 1646 |
% \end{macrocode} |
| 1647 |
% Call the code that is common to all the environments. |
| 1648 |
% \begin{macrocode} |
| 1649 |
\x@supertabular |
| 1650 |
% \end{macrocode} |
| 1651 |
% Finally, start a normal \Lenv{tabular} |
| 1652 |
% \begin{macrocode} |
| 1653 |
\minipage{\columnwidth}% |
| 1654 |
\parfillskip\ST@parfillskip |
| 1655 |
\rightskip \ST@rightskip |
| 1656 |
\leftskip \ST@leftskip |
| 1657 |
\noindent\expandafter\org@tabular\expandafter{\ST@tableformat}% |
| 1658 |
\@@tablehead} |
| 1659 |
|
| 1660 |
% \end{macrocode} |
| 1661 |
% \end{macro} |
| 1662 |
% |
| 1663 |
% \begin{macro}{\mpxtabular*} |
| 1664 |
% We start by looking for the optional argument of the tabular environment. |
| 1665 |
% \begin{macrocode} |
| 1666 |
\@namedef{mpxtabular*}#1{% |
| 1667 |
\@ifnextchar[{\@nameuse{@mpsupertabular*}{#1}}% |
| 1668 |
{\@nameuse{@mpsupertabular*}{#1}[]}%] |
| 1669 |
} |
| 1670 |
% \end{macrocode} |
| 1671 |
% |
| 1672 |
% Now we can save the intended width and the preamble of |
| 1673 |
% the \Lenv{tabular*}. |
| 1674 |
% \begin{macrocode} |
| 1675 |
\@namedef{@mpsupertabular*}#1[#2]#3{% |
| 1676 |
\ST@trace\tw@{Starting a new mpxtabular*}% |
| 1677 |
\def\ST@tableformat{#3}% |
| 1678 |
\ST@wd=#1\relax |
| 1679 |
\global\ST@startrue |
| 1680 |
\global\ST@mptrue |
| 1681 |
\ST@rightskip \rightskip |
| 1682 |
\ST@leftskip \leftskip |
| 1683 |
\ST@parfillskip \parfillskip |
| 1684 |
% \end{macrocode} |
| 1685 |
% Now is the time to call the common code for both environments. |
| 1686 |
% \begin{macrocode} |
| 1687 |
\x@supertabular |
| 1688 |
% \end{macrocode} |
| 1689 |
% And we can start a normal \Lenv{tabular*} environment. |
| 1690 |
% \begin{macrocode} |
| 1691 |
\minipage{\columnwidth}% |
| 1692 |
\parfillskip\ST@parfillskip |
| 1693 |
\rightskip \ST@rightskip |
| 1694 |
\leftskip \ST@leftskip |
| 1695 |
\noindent\expandafter\csname org@tabular*\expandafter\endcsname |
| 1696 |
\expandafter{\expandafter\ST@wd\expandafter}% |
| 1697 |
\expandafter{\ST@tableformat}% |
| 1698 |
\@@tablehead} |
| 1699 |
% \end{macrocode} |
| 1700 |
% \end{macro} |
| 1701 |
% |
| 1702 |
% \begin{macro}{\endxtabular} |
| 1703 |
% \begin{macro}{\endxtabular*} |
| 1704 |
% These close the \Lenv{xtabular} and \Lenv{xtabular*} |
| 1705 |
% environments. |
| 1706 |
% |
| 1707 |
% For the extension, this macro has been modified to write out |
| 1708 |
% to the \file{.aux} file the |
| 1709 |
% number of pages used for the supertabular. |
| 1710 |
% \begin{macrocode} |
| 1711 |
\def\endxtabular{% |
| 1712 |
\ifx\@table@last@tail\undefined |
| 1713 |
\@tabletail |
| 1714 |
\else |
| 1715 |
\@table@last@tail |
| 1716 |
\fi |
| 1717 |
\csname endtabular\ifST@star*\fi\endcsname |
| 1718 |
% \end{macrocode} |
| 1719 |
% While studying the original code to determine where additions were |
| 1720 |
% needed for the extension, I realized that the last part of |
| 1721 |
% the |\end...| code was common to all the environments. I have broken |
| 1722 |
% it out into a seperate routine which also includes the modification |
| 1723 |
% needed for the extension. |
| 1724 |
% \begin{macrocode} |
| 1725 |
\x@endsupertabular |
| 1726 |
% \end{macrocode} |
| 1727 |
% And back to the original code. |
| 1728 |
% \begin{macrocode} |
| 1729 |
\ST@trace\tw@{Ended a xtabular\ifST@star*\fi}} |
| 1730 |
% \end{macrocode} |
| 1731 |
% |
| 1732 |
% The definition of the ending of the \Lenv{xtabular*} |
| 1733 |
% environment is simple: |
| 1734 |
% \begin{macrocode} |
| 1735 |
\expandafter\let\csname endxtabular*\endcsname\endxtabular |
| 1736 |
% \end{macrocode} |
| 1737 |
% \end{macro} |
| 1738 |
% \end{macro} |
| 1739 |
% |
| 1740 |
% \begin{macro}{\x@endsupertabular} |
| 1741 |
% This macro contains the code that is common to all the |\end...| |
| 1742 |
% commands. It includes the modification required for the extension. |
| 1743 |
% \changes{v2}{1997/11/30}{Added x@endsupertabular routine} |
| 1744 |
% \begin{macrocode} |
| 1745 |
\newcommand{\x@endsupertabular}{% |
| 1746 |
% \end{macrocode} |
| 1747 |
% Restore the original definition of |\@tabularcr| |
| 1748 |
% \begin{macrocode} |
| 1749 |
\ST@restore |
| 1750 |
% \end{macrocode} |
| 1751 |
% Check if we have to insert a caption and restore to default |
| 1752 |
% behaviour of putting captions at the top. |
| 1753 |
% \begin{macrocode} |
| 1754 |
\if@topcaption |
| 1755 |
\else |
| 1756 |
\@process@tablecaption |
| 1757 |
\global\@topcaptiontrue |
| 1758 |
\fi |
| 1759 |
% \end{macrocode} |
| 1760 |
% Restore the meaning of |\\| to the one it had before the start |
| 1761 |
% of this environment. Also re-initialize some control-sequences |
| 1762 |
% \begin{macrocode} |
| 1763 |
\global\let\\=\@oldcr |
| 1764 |
\global\let\@table@first@head\undefined |
| 1765 |
%%% \global\let\@table@last@tail\undefined |
| 1766 |
\global\let\@process@tablecaption\relax |
| 1767 |
% \end{macrocode} |
| 1768 |
% \emph{Extension:} For the extension, write the number of the last page |
| 1769 |
% to the \file{.aux} file. Also, if we are in the \file{iso} class, reset |
| 1770 |
% the `float' flag. |
| 1771 |
% \changes{v2}{1997/12/02}{Added resetting of \cs{ifinfloat}} |
| 1772 |
% \begin{macrocode} |
| 1773 |
\PWSToplastpagenum |
| 1774 |
\infloatfalse} |
| 1775 |
% \end{macrocode} |
| 1776 |
% \end{macro} |
| 1777 |
% |
| 1778 |
% \begin{macro}{\PWSToplastpagenum} |
| 1779 |
% \emph{Extension:} This routine is responsible for writing the number of the |
| 1780 |
% last page of the supertabular to the \file{.aux} file. |
| 1781 |
% |
| 1782 |
% What gets written is |
| 1783 |
% |\PWST@vi{4}|, assuming that the value of \Lcount{c@PWSTtable} is 6 |
| 1784 |
% and the value of \Lcount{PWSTcurpage} is 4. |
| 1785 |
% \changes{v2}{1997/11/30}{Added PWSToplastpagenum routine} |
| 1786 |
% \changes{v2.3}{2000/04/09}{Just checked for number of entry lines in \cs{PWSToplastpagenum} } |
| 1787 |
% \begin{macrocode} |
| 1788 |
\newcommand{\PWSToplastpagenum}{% |
| 1789 |
% \end{macrocode} |
| 1790 |
% There are a number of cases to consider. The first decision is whether |
| 1791 |
% the current page is the previously calculated last page. |
| 1792 |
% \begin{macrocode} |
| 1793 |
\ifnum\PWSTcurpage=\PWSTlastpage |
| 1794 |
% \end{macrocode} |
| 1795 |
% The current table ends on the calculated last page. There are four |
| 1796 |
% cases to consider: |
| 1797 |
% \begin{enumerate} |
| 1798 |
% \item The table has not overflowed (|firstcall| is TRUE) and the table |
| 1799 |
% is not empty --- this page is still the last page. |
| 1800 |
% \item The table has not overflowed (|firstcall| is TRUE) and the table |
| 1801 |
% is empty --- this page is after the actual last page, so decrease |
| 1802 |
% the page number. |
| 1803 |
% \item The table has overflowed (|firstcall| is FALSE) and the overflow |
| 1804 |
% is large enough to generate a non-empty table on the next page --- |
| 1805 |
% increment the page number. |
| 1806 |
% \item The table has overflowed (|firstcall| is FALSE) and the overflow |
| 1807 |
% is small enough to generate an empty table on the next page --- |
| 1808 |
% this page is still the last page. |
| 1809 |
% \end{enumerate} |
| 1810 |
% \begin{macrocode} |
| 1811 |
\iffirstcall % on last, no overflow |
| 1812 |
%% \ifnum\PWSTlines < \PWSTlasthead % this table is empty |
| 1813 |
\ifnum\PWSTlines < \@ne % this table is empty |
| 1814 |
\global\advance\PWSTcurpage \m@ne |
| 1815 |
\fi |
| 1816 |
\else % overflow |
| 1817 |
%% \ifnum\PWSTlines > \tw@ % enough for another page |
| 1818 |
\ifnum\PWSTlines > \z@ % enough for another page |
| 1819 |
\global\advance\PWSTcurpage \@ne |
| 1820 |
\fi |
| 1821 |
\fi |
| 1822 |
\else |
| 1823 |
% \end{macrocode} |
| 1824 |
% The table has ended on a page that is not the calculated last page. |
| 1825 |
% If the table is empty, then decrement the page number, else this is |
| 1826 |
% the last page. |
| 1827 |
% \begin{macrocode} |
| 1828 |
%% \ifnum\PWSTlines < \PWSThead % empty table |
| 1829 |
\ifnum\PWSTlines < \@ne % empty table |
| 1830 |
\global\advance\PWSTcurpage \m@ne |
| 1831 |
\fi |
| 1832 |
\fi |
| 1833 |
% \end{macrocode} |
| 1834 |
% Finally, write out the `new' last page number. |
| 1835 |
% \begin{macrocode} |
| 1836 |
\if@filesw\immediate\write\@auxout% |
| 1837 |
{\gdef\string\PWST@\romannumeral\c@PWSTtable{\the\PWSTcurpage}}% |
| 1838 |
\ST@trace\tw@{Table \the\c@PWSTtable:\MessageBreak |
| 1839 |
wrote \the\PWSTcurpage\space as the last page}% |
| 1840 |
\fi} |
| 1841 |
|
| 1842 |
% \end{macrocode} |
| 1843 |
% \end{macro} |
| 1844 |
% |
| 1845 |
% |
| 1846 |
% \begin{macro}{\endmpxtabular} |
| 1847 |
% \begin{macro}{\endmpxtabular*} |
| 1848 |
% These close the \Lenv{mpxtabular} and \Lenv{mpxtabular*} |
| 1849 |
% environments. |
| 1850 |
% \begin{macrocode} |
| 1851 |
\def\endmpxtabular{% |
| 1852 |
\ifx\@table@last@tail\undefined |
| 1853 |
\@tabletail |
| 1854 |
\else |
| 1855 |
\@table@last@tail |
| 1856 |
\fi |
| 1857 |
\csname endtabular\ifST@star*\fi\endcsname |
| 1858 |
\endminipage |
| 1859 |
% \end{macrocode} |
| 1860 |
% Now call the common code for all |\end...|. |
| 1861 |
% \begin{macrocode} |
| 1862 |
\x@endsupertabular |
| 1863 |
% \end{macrocode} |
| 1864 |
% Finish per the original code. |
| 1865 |
% \begin{macrocode} |
| 1866 |
\ST@trace\tw@{Ended an mpxtabular\ifST@star*\fi}} |
| 1867 |
% \end{macrocode} |
| 1868 |
% |
| 1869 |
% The definition of the ending of the \Lenv{mpxtabular*} |
| 1870 |
% environment is simple: |
| 1871 |
% \begin{macrocode} |
| 1872 |
\expandafter\let\csname endmpxtabular*\endcsname\endmpxtabular |
| 1873 |
% \end{macrocode} |
| 1874 |
% \end{macro} |
| 1875 |
% \end{macro} |
| 1876 |
% |
| 1877 |
% \begin{macro}{\ST@restore} |
| 1878 |
% This macro restores the original definitions of the macros that |
| 1879 |
% handle parbox entries and the `end of row' macros. |
| 1880 |
% \begin{macrocode} |
| 1881 |
\def\ST@restore{% |
| 1882 |
\ifx\undefined\@classix |
| 1883 |
\let\@tabularcr\org@tabularcr |
| 1884 |
\else |
| 1885 |
\let\@arraycr\org@tabularcr |
| 1886 |
\fi |
| 1887 |
\let\@startpbox\org@startpbox |
| 1888 |
\let\@endpbox\org@endpbox} |
| 1889 |
% \end{macrocode} |
| 1890 |
% \end{macro} |
| 1891 |
% |
| 1892 |
% \begin{macro}{\inner@tabular} |
| 1893 |
% \begin{macro}{\inner@tabular*} |
| 1894 |
% In order to facilitate complete \Lenv{tabular} environments to be in |
| 1895 |
% a cell of a \Lenv{supertabular} we need to adapt the definition |
| 1896 |
% of the original environments. For the inner \Lenv{tabular} a |
| 1897 |
% number of definitions have to be restored. |
| 1898 |
% \begin{macrocode} |
| 1899 |
\def\inner@tabular{% |
| 1900 |
\ST@restore |
| 1901 |
\let\\=\@oldcr |
| 1902 |
\noindent |
| 1903 |
\org@tabular} |
| 1904 |
\@namedef{inner@tabular*}{% |
| 1905 |
\ST@restore |
| 1906 |
\let\\=\@oldcr |
| 1907 |
\noindent |
| 1908 |
\csname org@tabular*\endcsname} |
| 1909 |
% \end{macrocode} |
| 1910 |
% \end{macro} |
| 1911 |
% \end{macro} |
| 1912 |
% |
| 1913 |
% \begin{macro}{\ST@cr} |
| 1914 |
% This macro is called by each |\\| inside the tabular environment. |
| 1915 |
% It updates the estimate of the amount of space left on the |
| 1916 |
% current page and starts a new page if necessary. |
| 1917 |
% \begin{macrocode} |
| 1918 |
\def\ST@cr{% |
| 1919 |
\noalign{% |
| 1920 |
\ST@trace\thr@@{Parbox height: \the\ST@pboxht\MessageBreak |
| 1921 |
Line height: \the\ST@lineht}% |
| 1922 |
\ifnum\ST@pboxht<\ST@lineht |
| 1923 |
% \end{macrocode} |
| 1924 |
% If there is a non-empty line, but an empty parbox, then |
| 1925 |
% |\ST@pboxht| might be non-zero, but too small thereby breaking |
| 1926 |
% the algorithm. Therefore we estimate the height of the line to be |
| 1927 |
% |\ST@lineht| in this case, and store it in |\ST@prevht|. |
| 1928 |
% \begin{macrocode} |
| 1929 |
\global\advance\ST@pageleft -\ST@lineht |
| 1930 |
\global\ST@prevht\ST@lineht |
| 1931 |
\else |
| 1932 |
% \end{macrocode} |
| 1933 |
% When the parbox is not empty we take its height into account |
| 1934 |
% plus a little extra. |
| 1935 |
% \changes{v2.3}{2000/04/09}{Used \cs{PWST@xentrystretch} in \cs{ST@cr} } |
| 1936 |
% \begin{macrocode} |
| 1937 |
\global\advance\ST@pboxht \PWST@xentrystretch\ST@pboxht |
| 1938 |
\global\advance\ST@pboxht \ST@stretchht |
| 1939 |
\ST@trace\thr@@{Added par box with height \the\ST@pboxht}% |
| 1940 |
\global\advance\ST@pageleft -\ST@pboxht |
| 1941 |
\global\ST@prevht\ST@pboxht |
| 1942 |
\global\ST@pboxht\z@ |
| 1943 |
\fi |
| 1944 |
% \end{macrocode} |
| 1945 |
% |\ST@toadd| is the value of the optional argument of |\\|. |
| 1946 |
% \begin{macrocode} |
| 1947 |
\global\advance\ST@pageleft -\ST@toadd |
| 1948 |
\global\ST@toadd=\z@ |
| 1949 |
\ST@trace\thr@@{Space left for xtabular: \the\ST@pageleft}% |
| 1950 |
% \end{macrocode} |
| 1951 |
% \emph{Extension:} Increment the line number at this point. |
| 1952 |
% \begin{macrocode} |
| 1953 |
\global\advance\PWSTlines \@ne |
| 1954 |
\ST@trace\thr@@{Line counter incremented by one to: \the\PWSTlines}% |
| 1955 |
}% end of noalign |
| 1956 |
% \end{macrocode} |
| 1957 |
% In general, when the |\ST@pageleft| has become negative, |
| 1958 |
% the last row was so high |
| 1959 |
% that the supertabular doesn't fit on the current page. In this case we |
| 1960 |
% skip the current page and start at the top of the next one; otherwise |
| 1961 |
% \TeX{} will move this part of the table to a new page anyway, probably |
| 1962 |
% with a message about an overfull |\vbox|. |
| 1963 |
% |
| 1964 |
% \emph{Extension:} For the extension I do some special handling if we are on the last |
| 1965 |
% page. Essentially the idea is not to start a new page, but to continue |
| 1966 |
% on the current page, noting any overflow. |
| 1967 |
% \begin{macrocode} |
| 1968 |
\ifnum\PWSTcurpage=\PWSTlastpage |
| 1969 |
\PWST@lastpagecr |
| 1970 |
\else |
| 1971 |
% \end{macrocode} |
| 1972 |
% Execute the original code. |
| 1973 |
% \begin{macrocode} |
| 1974 |
\ifnum\ST@pageleft<\z@ |
| 1975 |
\ST@skippage |
| 1976 |
\else |
| 1977 |
% \end{macrocode} |
| 1978 |
% When there is not enough space left on the current page, we start |
| 1979 |
% a new page. To compute the amount of space needed we use the height |
| 1980 |
% of the previous line (|\ST@prevht|) as an estimate of the height |
| 1981 |
% of the next line. If we are processing an \Lenv{mpsupertabular} |
| 1982 |
% we also need to take the height of the footnotes into account. |
| 1983 |
% \begin{macrocode} |
| 1984 |
\noalign{\global\@tempdima\ST@tailht |
| 1985 |
\global\advance\@tempdima\ST@prevht |
| 1986 |
\ifST@mp |
| 1987 |
\ifvoid\@mpfootins\else |
| 1988 |
\global\advance\@tempdima\ht\@mpfootins |
| 1989 |
\global\advance\@tempdima 3pt |
| 1990 |
\fi |
| 1991 |
\fi}% end noalign |
| 1992 |
\ifnum\ST@pageleft<\@tempdima |
| 1993 |
\ST@newpage |
| 1994 |
\else |
| 1995 |
% \end{macrocode} |
| 1996 |
% This line is necessary because the tablehead has to be inserted |
| 1997 |
% \emph{after} the |\if\else\fi|-clause. For this purpose |\ST@next| is |
| 1998 |
% used. In the middle of tableprocessing it should be an \emph{empty} |
| 1999 |
% macro (\emph{not} |\relax|). |
| 2000 |
% \begin{macrocode} |
| 2001 |
\noalign{\global\let\ST@next\@empty}% |
| 2002 |
\fi |
| 2003 |
\fi |
| 2004 |
% \end{macrocode} |
| 2005 |
% \emph{Extension:} Close off the |\iflastpage|; |
| 2006 |
% \begin{macrocode} |
| 2007 |
\fi |
| 2008 |
% \end{macrocode} |
| 2009 |
% and finish per the original code. |
| 2010 |
% \begin{macrocode} |
| 2011 |
\ST@next} |
| 2012 |
|
| 2013 |
% \end{macrocode} |
| 2014 |
% \end{macro} |
| 2015 |
% |
| 2016 |
% \begin{macro}{\PWST@lastpagecr} |
| 2017 |
% \emph{Extension:} This routine handles newlines on the last page |
| 2018 |
% of a supertabular. The idea is that when we are on the last page the |
| 2019 |
% table continues to be processed until the end without calling for a |
| 2020 |
% newpage even if the table will be too long. I do need to record whether |
| 2021 |
% or not the table has `overflowed' the allowable space on the page. |
| 2022 |
% The code is very similar to the last part of the code for |\ST@cr|. |
| 2023 |
% \changes{v2}{1997/11/30}{Added PWST@lastpagecr routine} |
| 2024 |
% \begin{macrocode} |
| 2025 |
\newcommand{\PWST@lastpagecr}{% |
| 2026 |
\noalign{% |
| 2027 |
\ifnum\ST@pageleft<\z@ |
| 2028 |
% \end{macrocode} |
| 2029 |
% The table has overflowed, so record the fact. |
| 2030 |
% \begin{macrocode} |
| 2031 |
\PWST@setfirstcall |
| 2032 |
\fi |
| 2033 |
% \end{macrocode} |
| 2034 |
% Now continue along the lines of |\ST@cr|. |
| 2035 |
% \begin{macrocode} |
| 2036 |
\global\@tempdima\ST@tailht |
| 2037 |
\global\advance\@tempdima\ST@prevht |
| 2038 |
\ifST@mp |
| 2039 |
\ifvoid\@mpfootins\else |
| 2040 |
\global\advance\@tempdima\ht\@mpfootins |
| 2041 |
\global\advance\@tempdima 3pt |
| 2042 |
\fi |
| 2043 |
\fi |
| 2044 |
\ifnum\ST@pageleft<\@tempdima |
| 2045 |
% \end{macrocode} |
| 2046 |
% Again, the table has overflowed. |
| 2047 |
% \begin{macrocode} |
| 2048 |
\PWST@setfirstcall |
| 2049 |
\fi |
| 2050 |
% \end{macrocode} |
| 2051 |
% Finish like |\ST@cr|. |
| 2052 |
% \begin{macrocode} |
| 2053 |
\global\let\ST@next\@empty |
| 2054 |
}} |
| 2055 |
% \end{macrocode} |
| 2056 |
% \end{macro} |
| 2057 |
% |
| 2058 |
% \begin{macro}{\PWST@setfirstcall} |
| 2059 |
% \emph{Extension:} This routine records that a table on the last page |
| 2060 |
% has overflowed |
| 2061 |
% by setting |firstcall| to FALSE. If it is the first such overflow |
| 2062 |
% it also zeroes the line counter. |
| 2063 |
% \changes{v2}{1997/11/30}{Added PWST@setfirstcall routine} |
| 2064 |
% \begin{macrocode} |
| 2065 |
\newcommand{\PWST@setfirstcall}{% |
| 2066 |
\iffirstcall |
| 2067 |
\global\firstcallfalse |
| 2068 |
\global\PWSTlines=\z@ |
| 2069 |
\ST@trace\thr@@{Overflow on last page. Line counter set to \the\PWSTlines}% |
| 2070 |
\fi} |
| 2071 |
% \end{macrocode} |
| 2072 |
% \end{macro} |
| 2073 |
% |
| 2074 |
% \begin{macro}{\ST@skipfirstpart} |
| 2075 |
% This macro skips the current page and moves the entire supertabular |
| 2076 |
% that has been built so far to the next page. |
| 2077 |
% \begin{macrocode} |
| 2078 |
\def\ST@skipfirstpart{% |
| 2079 |
\noalign{% |
| 2080 |
\ST@trace\tw@{Tabular too high, moving to next page}% |
| 2081 |
% \end{macrocode} |
| 2082 |
% In order for this to work properly we need to adapt the value of |
| 2083 |
% |\ST@pageleft|. When this macro is called it has a negative value. |
| 2084 |
% We should add the height of the next page to that (|\@colroom|). |
| 2085 |
% From the result the `normal' height of the supertabular should be |
| 2086 |
% subtracted (|\@colroom - \pagetotal|). This could be coded as follows: |
| 2087 |
% \begin{verbatim} |
| 2088 |
% \ST@dimen\@colroom |
| 2089 |
% \advance\ST@dimen-\pagetotal |
| 2090 |
% \global\advance\ST@pageleft\@colroom |
| 2091 |
% \global\advance\ST@pageleft-\ST@dimen |
| 2092 |
% \end{verbatim} |
| 2093 |
% However, note that |\@colroom| is added \emph{and} subtracted. Thus the |
| 2094 |
% code can be simplified to: |
| 2095 |
% \begin{macrocode} |
| 2096 |
\global\advance\ST@pageleft\pagetotal |
| 2097 |
% \end{macrocode} |
| 2098 |
% Then we can set |\ST@pagesofar| to zero and start the new page. |
| 2099 |
% \begin{macrocode} |
| 2100 |
\global\ST@pagesofar\z@ |
| 2101 |
\newpage |
| 2102 |
% \end{macrocode} |
| 2103 |
% Finally we make sure that this macro can only be executed once for |
| 2104 |
% each supertabular by changing the definition of |\ST@skippage|. |
| 2105 |
% \begin{macrocode} |
| 2106 |
\global\let\ST@skippage\ST@newpage |
| 2107 |
}} |
| 2108 |
% \end{macrocode} |
| 2109 |
% \end{macro} |
| 2110 |
% |
| 2111 |
% \begin{macro}{\ST@newpage} |
| 2112 |
% This macro performs the actions necessary to start a new page. |
| 2113 |
% |
| 2114 |
% This macro is also modified for the extension to supertabluar. |
| 2115 |
% |
| 2116 |
% \begin{macrocode} |
| 2117 |
\def\ST@newpage{% |
| 2118 |
\noalign{\ST@trace\tw@{Starting new page, writing tail}}% |
| 2119 |
% \end{macrocode} |
| 2120 |
% Output |\tabletail|, close the tabular environment, close a minipage |
| 2121 |
% if necessary, output all material and start a fresh new page. |
| 2122 |
% \begin{macrocode} |
| 2123 |
\@tabletail |
| 2124 |
\ifST@star |
| 2125 |
\csname endtabular*\endcsname |
| 2126 |
\else |
| 2127 |
\endtabular |
| 2128 |
\fi |
| 2129 |
\ifST@mp |
| 2130 |
\endminipage |
| 2131 |
\fi |
| 2132 |
% \end{macrocode} |
| 2133 |
% Then we make sure that |\ST@skippage| can no longer be executed for |
| 2134 |
% this supertabular by changing its definition. |
| 2135 |
% \begin{macrocode} |
| 2136 |
\global\let\ST@skippage\ST@newpage |
| 2137 |
% \end{macrocode} |
| 2138 |
% On with the output. |
| 2139 |
% |
| 2140 |
% \emph{Extension:} The original code had the next line as |
| 2141 |
% |\newpage\@calnextpageht|. However, if the general header has a |
| 2142 |
% vertical height that differs from the first header, then the table |
| 2143 |
% on the continuation pages may run short or, more disconcerting, long. |
| 2144 |
% The extension, I think, cures that by using a different algorithm to |
| 2145 |
% calculate the height on the next page. |
| 2146 |
% \changes{v2}{1997/11/30}{Replaced @calnextpageht by PWSTcalnextpageht in ST@newpage} |
| 2147 |
% \begin{macrocode} |
| 2148 |
\newpage\PWSTcalnextpageht |
| 2149 |
\ST@trace\tw@{writing head}% |
| 2150 |
% \end{macrocode} |
| 2151 |
% \emph{Extension:} The original code just let |\ST@next| to |\@tablehead|. |
| 2152 |
% The extension |
| 2153 |
% has to handle the special case of of the heading on the last page. |
| 2154 |
% \begin{macrocode} |
| 2155 |
\PWSTsethead |
| 2156 |
% \end{macrocode} |
| 2157 |
% Now we are back to the original supertabular code. |
| 2158 |
% \begin{macrocode} |
| 2159 |
\ifST@mp |
| 2160 |
\noindent\minipage{\columnwidth}% |
| 2161 |
\parfillskip\ST@parfillskip |
| 2162 |
\rightskip \ST@rightskip |
| 2163 |
\leftskip \ST@leftskip |
| 2164 |
\fi |
| 2165 |
\noindent |
| 2166 |
\ifST@star |
| 2167 |
\expandafter\csname org@tabular*\expandafter\endcsname |
| 2168 |
\expandafter{\expandafter\ST@wd\expandafter}% |
| 2169 |
\expandafter{\ST@tableformat}% |
| 2170 |
\else |
| 2171 |
\expandafter\org@tabular\expandafter{\ST@tableformat}% |
| 2172 |
\fi} |
| 2173 |
% \end{macrocode} |
| 2174 |
% \end{macro} |
| 2175 |
% |
| 2176 |
% \begin{macro}{\PWSTsethead} |
| 2177 |
% \emph{Extension:} This is more extension code for use within |\ST@newpage|. |
| 2178 |
% It provides the proper table head for the page about to be processed. |
| 2179 |
% \changes{v2}{1997/11/30}{Added PWSTsethead routine} |
| 2180 |
% \begin{macrocode} |
| 2181 |
\newcommand{\PWSTsethead}{% |
| 2182 |
% \end{macrocode} |
| 2183 |
% First the line counter is zeroed. |
| 2184 |
% \begin{macrocode} |
| 2185 |
\global\PWSTlines=\z@ |
| 2186 |
\ST@trace\thr@@{Newpage, line counter set to: \the\PWSTlines}% |
| 2187 |
% \end{macrocode} |
| 2188 |
% The current page counter is incremented |
| 2189 |
% and it is checked against the old page counter to see if this is |
| 2190 |
% the last page of this supertabular. |
| 2191 |
% \begin{macrocode} |
| 2192 |
\global\advance\PWSTcurpage\@ne |
| 2193 |
\ST@trace\tw@{Table \the\c@PWSTtable:\MessageBreak |
| 2194 |
current page = \the\PWSTcurpage,\MessageBreak |
| 2195 |
last page = \the\PWSTlastpage}% |
| 2196 |
\ifnum\PWSTcurpage=\PWSTlastpage |
| 2197 |
\ST@trace\tw@{Newpage is the last page}% |
| 2198 |
% \end{macrocode} |
| 2199 |
% We are on the last page. If there are more than |
| 2200 |
% one pages and the last table heading has been specified, |
| 2201 |
% then the heading is set to |\@table@last@head|, otherwise it is set |
| 2202 |
% to |\@tablehead|. |
| 2203 |
% \begin{macrocode} |
| 2204 |
\ifnum\PWSTcurpage>\@ne |
| 2205 |
\ifx\@table@last@head\relax |
| 2206 |
\let\ST@next\@tablehead |
| 2207 |
\ST@trace\tw@{Set heading to tablehead}% |
| 2208 |
\else |
| 2209 |
\let\ST@next\@table@last@head |
| 2210 |
\ST@trace\tw@{Set heading to tablelasthead}% |
| 2211 |
\fi |
| 2212 |
\fi |
| 2213 |
\else |
| 2214 |
% \end{macrocode} |
| 2215 |
% We are not on the last page, so just set the heading to |\@tablehead|. |
| 2216 |
% \begin{macrocode} |
| 2217 |
\let\ST@next\@tablehead |
| 2218 |
\ST@trace\tw@{Set heading to tablehead}% |
| 2219 |
\fi} |
| 2220 |
% \end{macrocode} |
| 2221 |
% \end{macro} |
| 2222 |
|
| 2223 |
% The end of this package |
| 2224 |
% \begin{macrocode} |
| 2225 |
%</xtab> |
| 2226 |
% \end{macrocode} |
| 2227 |
% |
| 2228 |
% |
| 2229 |
% |
| 2230 |
% \bibliographystyle{alpha} |
| 2231 |
% |
| 2232 |
% \begin{thebibliography}{GMS94} |
| 2233 |
% |
| 2234 |
% \bibitem[GMS94]{GOOSSENS94} |
| 2235 |
% Michel Goossens, Frank Mittelbach, and Alexander Samarin. |
| 2236 |
% \newblock {\em The LaTeX Companion}. |
| 2237 |
% \newblock Addison-Wesley Publishing Company, 1994. |
| 2238 |
% |
| 2239 |
% \bibitem[Wil96]{PRW96i} |
| 2240 |
% Peter~R. Wilson. |
| 2241 |
% \newblock {\em {LaTeX for standards: The LaTeX package files user manual}}. |
| 2242 |
% \newblock NIST Report NISTIR, June 1996. |
| 2243 |
% |
| 2244 |
% \end{thebibliography} |
| 2245 |
% |
| 2246 |
% |
| 2247 |
% \Finale |
| 2248 |
% \PrintIndex |
| 2249 |
% |
| 2250 |
\endinput |
| 2251 |
|
| 2252 |
%% \CharacterTable |
| 2253 |
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 2254 |
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 2255 |
%% Digits \0\1\2\3\4\5\6\7\8\9 |
| 2256 |
%% Exclamation \! Double quote \" Hash (number) \# |
| 2257 |
%% Dollar \$ Percent \% Ampersand \& |
| 2258 |
%% Acute accent \' Left paren \( Right paren \) |
| 2259 |
%% Asterisk \* Plus \+ Comma \, |
| 2260 |
%% Minus \- Point \. Solidus \/ |
| 2261 |
%% Colon \: Semicolon \; Less than \< |
| 2262 |
%% Equals \= Greater than \> Question mark \? |
| 2263 |
%% Commercial at \@ Left bracket \[ Backslash \\ |
| 2264 |
%% Right bracket \] Circumflex \^ Underscore \_ |
| 2265 |
%% Grave accent \` Left brace \{ Vertical bar \| |
| 2266 |
%% Right brace \} Tilde \~} |