Debian Codegraph @

texmf-dist/source/latex/texpower/tplists.dtx

raw
1 %%
2 % \iffalse meta-comment
3 % --------------------------------------------------------------
4 % Part of the TeXPower bundle
5 % Copyright (C) 2003-2005 Hans Fredrik Nordhaug
6 %
7 % This program is free software; you can redistribute it and/or
8 % modify it under the terms of the GNU General Public License
9 % as published by the Free Software Foundation; either version 2
10 % of the License, or (at your option) any later version.
11 %
12 % This program is distributed in the hope that it will be useful,
13 % but WITHOUT ANY WARRANTY; without even the implied warranty of
14 % MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 % GNU General Public License for more details.
16 % --------------------------------------------------------------
17 %
18 % tplists.dtx,v 1.6 2005/04/07 21:43:07 hansfn Exp
19 %
20 % \fi
21 %
22 % \iffalse
23 %
24 %<*driver>
25 \ProvidesFile{tplists.dtx}
26 %</driver>
27 %<tplists>\NeedsTeXFormat{LaTeX2e}
28 %<tplists>\ProvidesPackage{tplists}
29 %<*tplists>
30 [2005/04/07 v0.2 Easy Dynamic Lists using TeXPower]
31 %</tplists>
32 %
33 %<*driver>
34 \documentclass{ltxdoc}
35 \EnableCrossrefs
36 \CodelineIndex
37 \RecordChanges
38 \begin{document}
39 \DocInput{tplists.dtx}
40 \end{document}
41 %</driver>
42 %
43 % \fi
44 %
45 % \CheckSum{634}
46 %
47 % \CharacterTable
48 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
49 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
50 % Digits \0\1\2\3\4\5\6\7\8\9
51 % Exclamation \! Double quote \" Hash (number) \#
52 % Dollar \$ Percent \% Ampersand \&
53 % Acute accent \' Left paren \( Right paren \)
54 % Asterisk \* Plus \+ Comma \,
55 % Minus \- Point \. Solidus \/
56 % Colon \: Semicolon \; Less than \<
57 % Equals \= Greater than \> Question mark \?
58 % Commercial at \@ Left bracket \[ Backslash \\
59 % Right bracket \] Circumflex \^ Underscore \_
60 % Grave accent \` Left brace \{ Vertical bar \|
61 % Right brace \} Tilde \~}
62 %
63 %
64 % \GetFileInfo{tplists.dtx}
65 %
66 % \DoNotIndex{\newcommand,\newenvironment}
67 %
68 % \title{The \textsf{tplists} package\thanks{This document
69 % corresponds to \textsf{tplists}~\fileversion, dated \filedate.}}
70 % \author{ Hans Fredrik Nordhaug \\ \texttt{[email protected]}}
71 %
72 % \maketitle
73 %
74 % \tableofcontents
75 %
76 % \section{Introduction}
77 %
78 % The package provides easy dynamic lists. The following
79 % environments/lists are available
80 % \begin{enumerate}
81 % \item |stepenum|, |stepitem|, |stepdesc|, |stepeqlist|, |stepcompactenum|
82 % |stepcompactitem| and |stepcompacteqlist|.
83 % \item |flipenum|, |flipitem|, |flipdesc|, |flipeqlist|, |flipcompactenum|,
84 % |flipcompactitem|, and |flipcompacteqlist|
85 % \item |dimenum|, |dimitem|, |dimdesc|, |dimeqlist|, |dimcompactenum|,
86 % |dimcompactitem|, and |dimcompacteqlist|
87 % \end{enumerate}
88 % where |step| is short for stepped, |flip| for flipped and |dim| for dimmed.
89 % The packages |paralist| and |eqlist| must be loaded before this package to
90 % use the *eqlist and *compact* lists. |enum|, |item| and |desc| is of course
91 % short for |enumerate|, |itemize| and |description| respectively.
92 %
93 % \section{User interface}
94 %
95 % The package is loaded in the normal fashion, eg: |\usepackage{tplists}| The package
96 % works better (the lists look better) if TeXPower uses colors.
97 %
98 % All lists (except *eqlist) takes an optional parameter adding to the indent
99 % of the list. Note that dim* and flip* lists do not nest, and that step* lists
100 % inside dim*/flip* will behave as a dim*/flip* list respectively.
101 % (The normal |itemize|, |enumerate| and |description| lists are modified so they accept the
102 % optional parameter and work nested with the new lists.)
103 %
104 % Example:
105 %
106 % \begin{verbatim}
107 % \documentclass[a4paper]{article}
108 % \usepackage[darkbackground,display]{texpower}
109 % \usepackage{tplists}
110 % \begin{document}
111 % \begin{flipitem}[2cm]
112 % \item Before
113 % \begin{enumerate}[1cm]
114 % \item An item
115 % \item Another item
116 % \end{enumerate}
117 % \item After
118 % \end{flipitem}
119 % \end{document}
120 % \end{verbatim}
121 %
122 % \section{Description of package options}
123 %
124 % The following options exist:
125 % \begin{description}
126 % \item[|pausestep|] makes step* lists use |\pause|%
127 % \item[|noflipendstep|] avoids the extra step at the end of a flipped list.
128 % \end{description}
129 %
130 % All options can be set anywhere in the document using a setup command, for example
131 % |\tplsetup{pausestep,noflipendstep=false}|. If the keys in the setup command have no
132 % value true is assumed.
133 %
134 % \section{Issues}
135 %
136 % The step* lists use |\vstep| (as default) which give weird results with
137 % structured backgrounds. Using the pausestep option fixes this, but then you
138 % can't nest step* lists inside dim* or flip* lists. There are also some
139 % unresolved problems when using french babel.
140 %
141 % \StopEventually{\PrintChanges\PrintIndex}
142 %
143 % \section{Implementation}
144 %
145 % \changes{v0.1}{2003/10/03}{First public release.}
146 %
147 % \changes{v0.1a}{2003/10/04}{Removed redefinition of eqlist (since it didn't work).}
148 %
149 % \changes{v0.1b}{2003/10/07}{Corrected some typos in this documentation.
150 % Added option pausestep and made dim* (and all variants of flip*) lists work without
151 % colors by using boldface for active items.}
152 %
153 % \changes{v0.2}{2005/04/07}{Added flipdesc, stepdesc, dimdesc environments for
154 % easy dynamic description lists. Improved behaviour when not in display mode.
155 % Fixed step lists behaviour when in display mode, but without colors. Added
156 % noflipendstep option and a setup command to enable setting of all options
157 % anywhere in the document }
158 %
159 % \subsection{Loading of packages}
160 %
161 % \begin{macrocode}
162 \RequirePackage{texpower}
163 % \end{macrocode}
164 % Compact enum/item.
165 % \begin{macrocode}
166 \newboolean{tpl@paralist}
167 \@ifpackageloaded{paralist}{\setboolean{tpl@paralist}{true}}{}
168 % \end{macrocode}
169 % Lists with equal indentation.
170 % \begin{macrocode}
171 \newboolean{tpl@eqlist}
172 \@ifpackageloaded{eqlist}{\setboolean{tpl@eqlist}{true}}{}
173 % \end{macrocode}
174 %
175 % \subsection{Defining options}
176 %
177 % Use |\pause| for steplists (too avoid problems with structured backgrounds).
178 % \begin{macrocode}
179 \newboolean{tpl@pausestep}
180 \DeclareOption{pausestep}{\setboolean{tpl@pausestep}{true}}
181 % \end{macrocode}
182 % Don't add an extra step at the end of a flipped list.
183 % \begin{macrocode}
184 \newboolean{tpl@noflipendstep}
185 \DeclareOption{noflipendstep}{\setboolean{tpl@noflipendstep}{true}}
186
187 \ProcessOptions
188 % \end{macrocode}
189 % Defining setup command to enable change of options anywhere in the document.
190 % \begin{macrocode}
191 \define@key{tpl}{pausestep}[true]{%
192 \setboolean{tpl@pausestep}{#1}
193 }
194 \define@key{tpl}{noflipendstep}[true]{%
195 \setboolean{tpl@noflipendstep}{#1}
196 }
197 \newcommand*{\tplsetup}{\setkeys{tpl}}
198 % \end{macrocode}
199 %
200 % \subsection{Flipped/dimmed/stepped lists/environments}
201 %
202 % |\iftpl@instepenv| indicates if we are in some kind of stepped list
203 % environment. |\iftpl@indimenv| / |\tpl@inflipenv| indicates that we are
204 % using one of the stepwise environments from texpower (that doesn't
205 % nest). |\iftpl@inpausestepenv| indicates that we are in a stepped
206 % list that uses |\pause|.
207 %
208 % using |tpl@| as prefix for internals.
209 % \begin{macrocode}
210 \newif\iftpl@instepenv \tpl@instepenvfalse
211 \newif\iftpl@inpausestepenv \tpl@inpausestepenvfalse
212 \newif\iftpl@indimenv \tpl@indimenvfalse
213 \newif\iftpl@inflipenv \tpl@inflipenvfalse
214 \let\oldenumerate=\enumerate
215 \let\olditemize=\itemize
216 \let\olddescription=\description
217 \let\endoldenumerate=\endenumerate
218 \let\endolditemize=\enditemize
219 \let\endolddescription=\enddescription
220 \ifthenelse{\boolean{tpl@eqlist}}{%
221 \let\oldeqlist=\eqlist
222 \let\endoldeqlist=\endeqlist
223 }{}
224 \ifthenelse{\boolean{tpl@paralist}}{%
225 \let\oldcompactenum=\compactenum
226 \let\oldcompactitem=\compactitem
227 \let\endoldcompactenum=\endcompactenum
228 \let\endoldcompactitem=\endcompactitem
229 }{}
230 % \end{macrocode}
231 %
232 % Defining |\tpl@collect@body| - command used to scan the list
233 % environments. Definition borrowed from 'amsmath.sty' - slightly
234 % modified to allow for 'long' arguments
235 % \begin{macrocode}
236 \let\tpl@nx\noexpand
237 \let\tpl@xp\expandafter
238 \newtoks\tpl@emptytoks
239 \newtoks\tpl@envbody
240 \long\def\tpl@addto@envbody#1{\global\tpl@envbody\tpl@xp{\the\tpl@envbody#1}}
241 \def\tpl@collect@body#1{%
242 \tpl@envbody{\tpl@xp#1\tpl@xp{\the\tpl@envbody}}%
243 \edef\tpl@process@envbody{\the\tpl@envbody\tpl@nx\end{\@currenvir}}%
244 \tpl@envbody\tpl@emptytoks \def\begin@stack{b}%
245 \begingroup
246 \tpl@xp\let\csname\@currenvir\endcsname\tpl@collect@@body
247 \edef\tpl@process@envbody{\tpl@xp\tpl@nx\csname\@currenvir\endcsname}%
248 \tpl@process@envbody
249 }
250 \long\def\tpl@push@begins#1\begin#2{%
251 \ifx\end#2\else b\tpl@xp\tpl@push@begins\fi
252 }
253 \long\def\tpl@collect@@body#1\end#2{%
254 \edef\begin@stack{\tpl@push@begins#1\begin\end \tpl@xp\@gobble\begin@stack}%
255 \ifx\@empty\begin@stack
256 \endgroup
257 \@checkend{#2}%
258 \tpl@addto@envbody{#1}%
259 \else
260 \tpl@addto@envbody{#1\end{#2}}%
261 \fi
262 \tpl@process@envbody
263 }
264 % \end{macrocode}
265 %
266 % Defining command |\tpl@addmargin| used to add a length to
267 % the leftmargin of the current level in a list.
268 % \begin{macrocode}
269 \def\tpl@addmargin#1{%
270 \advance\@listdepth 1
271 \addtolength{\csname leftmargin\romannumeral\@listdepth\endcsname}{#1}
272 \advance\@listdepth -1
273 }
274
275 \ifthenelse{\boolean{display}}{%
276 %
277 % Defining a flipped step command if we are in display mode.
278 % Note that |\tpl@flipstep| takes no argument.
279 % \begin{macrocode}
280 \ifthenelse{\boolean{TPcolor}}% Can we use colors?
281 {% Yes. In this case highlighting is implemented by switching color.
282 \def\tpl@flipstep{%
283 \step{\ifthenelse{\boolean{firstactivation}}%
284 {\color{textcolor}}%
285 {\color{inactivecolor}}%
286 }%
287 }%
288 }
289 {% No. In this case highlighting is implemented by putting the item in boldface.
290 \def\tpl@flipstep{%
291 \step{\ifthenelse{\boolean{firstactivation}}{\bfseries}{\mdseries}}
292 }%
293 }
294 % \end{macrocode}
295 %
296 % Defining a dimmed step command if we are in display mode.
297 % Note that |\tpl@dimstep| takes no argument.
298 % \begin{macrocode}
299 \ifthenelse{\boolean{TPcolor}}% Can we use colors?
300 {% Yes. In this case highlighting is implemented by using \dstep
301 \def\tpl@dimstep{\dstep}%
302 }
303 {% No. In this case highlighting is implemented by putting the item in boldface.
304 \def\tpl@dimstep{%
305 \step{\bfseries}%
306 \ifthenelse{\boolean{active}}{}{\mdseries}%
307 }%
308 }
309 % \end{macrocode}
310 %
311 % Defining a (normal) step command if we are in display mode.
312 % Note that |\tpl@step| takes no argument.
313 % \begin{macrocode}
314 \ifthenelse{\boolean{TPcolor}}% Can we use colors?
315 {% Yes. In this case stepping is implemented by using \vstep
316 \def\tpl@step{\vstep}%
317 }
318 {% No. In this case stepping is implemented using \pause
319 \def\tpl@step{\pause}%
320 }
321 % \end{macrocode}
322 % TeXPower not in display mode - no need for a dimmed/flipped/normal step command.
323 % \begin{macrocode}
324 }{% \boolean{display} is false
325 \def\tpl@flipstep{\relax}%
326 \def\tpl@dimstep{\relax}%
327 \def\tpl@step{\relax}%
328 }
329 % \end{macrocode}
330 %
331 % Defining flipped stepped - itemize / description / enumerate / eqlist
332 % compact itemize / compact enumerate / compact eqlist - environments.
333 % \begin{macrocode}
334 \newenvironment{flipitem}[1][0cm]{%
335 \tpl@addmargin{#1}
336 \tpl@collect@body\@flipitem}%
337 {\global\@ignoretrue}
338 \newenvironment{flipdesc}[1][0cm]{%
339 \tpl@addmargin{#1}
340 \tpl@collect@body\@flipdesc}%
341 {\global\@ignoretrue}
342 \newenvironment{flipenum}[1][0cm]{%
343 \tpl@addmargin{#1}
344 \tpl@collect@body\@flipenum}%
345 {\global\@ignoretrue}
346 \ifthenelse{\boolean{tpl@eqlist}}{%
347 \newenvironment{flipeqlist}[1][0cm]{%
348 \tpl@collect@body\@flipeqlist}%
349 {\global\@ignoretrue}
350 \newenvironment{flipcompacteqlist}[1][0cm]{%
351 \tpl@collect@body\@flipcompacteqlist}%
352 {\global\@ignoretrue}
353 }{}
354 \ifthenelse{\boolean{tpl@paralist}}{%
355 \newenvironment{flipcompactitem}[1][0cm]{%
356 \tpl@addmargin{#1}
357 \tpl@collect@body\@flipcompactitem}%
358 {\global\@ignoretrue}
359 \newenvironment{flipcompactenum}[1][0cm]{%
360 \tpl@addmargin{#1}
361 \tpl@collect@body\@flipcompactenum}%
362 {\global\@ignoretrue}
363 }{}
364
365 \newcommand\@fliplist[2]{%
366 \iftpl@indimenv
367 \PackageError{tplists}{%
368 dim* and flip* environments do NOT nest}{%
369 Do not continue! Type 'q' to stop and fix the nested list.
370 }
371 \else\iftpl@instepenv
372 \begin{#1}
373 \let\hidestepcontents=\displaystepcontents
374 \renewcommand{\item}{\tpl@flipstep\tpl@origitem}%
375 #2
376 \end{#1}%
377 \else
378 \iftpl@inpausestepenv\let\liststepwise=\stepwise\fi
379 \liststepwise[\let\hidestepcontents=\displaystepcontents]{%
380 \begin{#1}
381 \iftpl@inpausestepenv\else
382 \iftpl@instepenv\else\let\tpl@origitem=\item\fi
383 \fi
384 \tpl@instepenvtrue
385 \tpl@inflipenvtrue
386 \renewcommand{\item}{\tpl@flipstep\tpl@origitem}%
387 #2
388 \ifthenelse{\boolean{tpl@noflipendstep}}{}{\step{}}%
389 \end{#1}}
390 \fi\fi
391 }
392
393 \newcommand\@flipitem[1]{%
394 \@fliplist{olditemize}{#1}}
395 \newcommand\@flipdesc[1]{%
396 \@fliplist{olddescription}{#1}}
397 \newcommand\@flipenum[1]{%
398 \@fliplist{oldenumerate}{#1}}
399 \ifthenelse{\boolean{tpl@eqlist}}{%
400 \newcommand\@flipeqlist[1]{%
401 \@fliplist{oldeqlist}{#1}}
402 \newcommand\@flipcompacteqlist[1]{%
403 \@fliplist{compacteqlist}{#1}}
404 }{}
405 \ifthenelse{\boolean{tpl@paralist}}{%
406 \newcommand\@flipcompactitem[1]{%
407 \@fliplist{oldcompactitem}{#1}}
408 \newcommand\@flipcompactenum[1]{%
409 \@fliplist{oldcompactenum}{#1}}
410 }{}
411 % \end{macrocode}
412 %
413 % Defining dimmed stepped - itemize / description / enumerate / eqlist /
414 % compact itemize / compact enumerate / compact eqlist - environments.
415 % \begin{macrocode}
416 \newenvironment{dimitem}[1][0cm]{%
417 \tpl@addmargin{#1}
418 \tpl@collect@body\@dimitem}%
419 {\global\@ignoretrue}
420 \newenvironment{dimdesc}[1][0cm]{%
421 \tpl@addmargin{#1}
422 \tpl@collect@body\@dimdesc}%
423 {\global\@ignoretrue}
424 \newenvironment{dimenum}[1][0cm]{%
425 \tpl@addmargin{#1}
426 \tpl@collect@body\@dimenum}%
427 {\global\@ignoretrue}
428 \ifthenelse{\boolean{tpl@eqlist}}{%
429 \newenvironment{dimeqlist}[1][0cm]{%
430 \tpl@collect@body\@dimeqlist}%
431 {\global\@ignoretrue}
432 \newenvironment{dimcompacteqlist}[1][0cm]{%
433 \tpl@collect@body\@dimcompacteqlist}%
434 {\global\@ignoretrue}
435 }{}
436 \ifthenelse{\boolean{tpl@paralist}}{%
437 \newenvironment{dimcompactitem}[1][0cm]{%
438 \tpl@addmargin{#1}
439 \tpl@collect@body\@dimcompactitem}%
440 {\global\@ignoretrue}
441 \newenvironment{dimcompactenum}[1][0cm]{%
442 \tpl@addmargin{#1}
443 \tpl@collect@body\@dimcompactenum}%
444 {\global\@ignoretrue}
445 }{}
446
447 \newcommand\@dimlist[2]{%
448 \iftpl@inflipenv
449 \PackageError{tplists}{%
450 dim* and flip* environments do NOT nest}{%
451 Do not continue! Type <q> to stop and fix the nested list.
452 }
453 \else\iftpl@instepenv
454 \begin{#1}
455 \renewcommand{\item}{\tpl@dimstep\tpl@origitem}%
456 #2
457 \end{#1}%
458 \else
459 \iftpl@inpausestepenv\let\liststepwise=\stepwise\fi
460 \liststepwise{%
461 \begin{#1}
462 \iftpl@inpausestepenv\else
463 \iftpl@instepenv\else\let\tpl@origitem=\item\fi
464 \fi
465 \tpl@instepenvtrue
466 \tpl@indimenvtrue
467 \renewcommand{\item}{\tpl@dimstep\tpl@origitem}%
468 #2
469 \end{#1}}
470 \fi\fi
471 }
472
473 \newcommand\@dimitem[1]{%
474 \@dimlist{olditemize}{#1}}
475 \newcommand\@dimdesc[1]{%
476 \@dimlist{olddescription}{#1}}
477 \newcommand\@dimenum[1]{%
478 \@dimlist{oldenumerate}{#1}}
479 \ifthenelse{\boolean{tpl@eqlist}}{%
480 \newcommand\@dimeqlist[1]{%
481 \@dimlist{oldeqlist}{#1}}
482 \newcommand\@dimcompacteqlist[1]{%
483 \@dimlist{compacteqlist}{#1}}
484 }{}
485 \ifthenelse{\boolean{tpl@paralist}}{%
486 \newcommand\@dimcompactitem[1]{%
487 \@dimlist{oldcompactitem}{#1}}
488 \newcommand\@dimcompactenum[1]{%
489 \@dimlist{oldcompactenum}{#1}}
490 }{}
491 % \end{macrocode}
492 %
493 % Defining stepped - itemize / description / enumerate / eqlist /
494 % compact itemize / compact enumerate / compact eqlist - environments.
495 % \begin{macrocode}
496 \newenvironment{stepitem}[1][0cm]{%
497 \tpl@addmargin{#1}
498 \tpl@collect@body\@stepitem}%
499 {\global\@ignoretrue}
500 \newenvironment{stepdesc}[1][0cm]{%
501 \tpl@addmargin{#1}
502 \tpl@collect@body\@stepdesc}%
503 {\global\@ignoretrue}
504 \newenvironment{stepenum}[1][0cm]{%
505 \tpl@addmargin{#1}
506 \tpl@collect@body\@stepenum}%
507 {\global\@ignoretrue}
508 \ifthenelse{\boolean{tpl@eqlist}}{%
509 \newenvironment{stepeqlist}[1][0cm]{%
510 \tpl@collect@body\@stepeqlist}%
511 {\global\@ignoretrue}
512 \newenvironment{stepcompacteqlist}[1][0cm]{%
513 \tpl@collect@body\@stepcompacteqlist}%
514 {\global\@ignoretrue}
515 }{}
516 \ifthenelse{\boolean{tpl@paralist}}{%
517 \newenvironment{stepcompactitem}[1][0cm]{%
518 \tpl@addmargin{#1}
519 \tpl@collect@body\@stepcompactitem}%
520 {\global\@ignoretrue}
521 \newenvironment{stepcompactenum}[1][0cm]{%
522 \tpl@addmargin{#1}
523 \tpl@collect@body\@stepcompactenum}%
524 {\global\@ignoretrue}
525 }{}
526 % \end{macrocode}
527 % Using |\pause| for step* lists if |tpl@pausestep| is true
528 % \begin{macrocode}
529 \newcommand\@steplist[2]{%
530 \ifthenelse{\boolean{tpl@pausestep}}{%
531 \iftpl@inflipenv
532 \PackageError{tplists}{%
533 flip* followed by step* environment does NOT work \MessageBreak
534 when the pausestep option is used}{%
535 Do not continue! Type <q> to stop and fix the nested list.
536 }
537 \else\iftpl@indimenv
538 \PackageError{tplists}{%
539 dim* followed by step* environment does NOT work \MessageBreak
540 when the pausestep option is used}{%
541 Do not continue! Type <q> to stop and fix the nested list.
542 }
543 \else
544 \begin{#1}
545 \iftpl@inpausestepenv\else\let\tpl@origitem=\item\fi
546 \tpl@inpausestepenvtrue
547 \renewcommand{\item}{\pause\tpl@origitem}%
548 #2
549 \end{#1}
550 \fi\fi
551 }{
552 % \end{macrocode}
553 % Using |\liststepwise| for step* lists if |tpl@pausestep| is false
554 % \begin{macrocode}
555 \iftpl@inflipenv
556 \begin{#1}
557 \renewcommand{\item}{\tpl@flipstep\tpl@origitem}
558 #2
559 \end{#1}%
560 \else\iftpl@indimenv
561 \begin{#1}
562 \renewcommand{\item}{\dstep\tpl@origitem}%
563 #2
564 \end{#1}%
565 \else\iftpl@instepenv
566 \begin{#1}
567 \renewcommand{\item}{\tpl@step\tpl@origitem}%
568 #2
569 \end{#1}%
570 \else
571 \liststepwise{%
572 \begin{#1}
573 \iftpl@instepenv\else\let\tpl@origitem=\item\fi
574 \tpl@instepenvtrue
575 \renewcommand{\item}{\tpl@step\tpl@origitem}%
576 #2
577 \end{#1}}
578 \fi\fi\fi
579 }
580 }
581
582 \newcommand\@stepitem[1]{%
583 \@steplist{olditemize}{#1}}
584 \newcommand\@stepdesc[1]{%
585 \@steplist{olddescription}{#1}}
586 \newcommand\@stepenum[1]{%
587 \@steplist{oldenumerate}{#1}}
588 \ifthenelse{\boolean{tpl@eqlist}}{%
589 \newcommand\@stepeqlist[1]{%
590 \@steplist{oldeqlist}{#1}}
591 \newcommand\@stepcompacteqlist[1]{%
592 \@steplist{compacteqlist}{#1}}
593 }{}
594 \ifthenelse{\boolean{tpl@paralist}}{%
595 \newcommand\@stepcompactitem[1]{%
596 \@steplist{oldcompactitem}{#1}}
597 \newcommand\@stepcompactenum[1]{%
598 \@steplist{oldcompactenum}{#1}}
599 }{}
600 % \end{macrocode}
601 %
602 % Defining compact eqlist
603 % \begin{macrocode}
604 \newenvironment{compacteqlist}[1][0cm]{%
605 % \tpl@addmargin{#1}
606 \begin{eqlist}[\parsep0pt\itemsep0pt]}%
607 {\end{eqlist}}
608 % \end{macrocode}
609 %
610 % Redefining enumerate, itemize and description to handle changes made by
611 % introducing steps and leftmargini-option.
612 % \begin{macrocode}
613 \renewenvironment{enumerate}[1][0cm]{%
614 \tpl@addmargin{#1}
615 \begin{oldenumerate}
616 \iftpl@instepenv
617 \renewcommand{\item}{\tpl@origitem}%
618 \fi
619 }%
620 {\end{oldenumerate}}
621
622 \renewenvironment{itemize}[1][0cm]{%
623 \tpl@addmargin{#1}
624 \begin{olditemize}
625 \iftpl@instepenv
626 \renewcommand{\item}{\tpl@origitem}%
627 \fi
628 }%
629 {\end{olditemize}}
630
631 \renewenvironment{description}[1][0cm]{%
632 % \tpl@addmargin{#1} % Has no effect - FIXME
633 \begin{olddescription}
634 \iftpl@instepenv
635 \renewcommand{\item}{\tpl@origitem}%
636 \fi
637 }%
638 {\end{olddescription}}
639 % \end{macrocode}
640 %
641 % Redefining compactenum and compactitem to handle changes made by
642 % introducing steps and leftmargini-option.
643 % \begin{macrocode}
644 \ifthenelse{\boolean{tpl@paralist}}{%
645 \renewenvironment{compactenum}[1][0cm]{%
646 \tpl@addmargin{#1}
647 \begin{oldcompactenum}
648 \iftpl@instepenv
649 \renewcommand{\item}{\tpl@origitem}%
650 \fi
651 }%
652 {\end{oldcompactenum}}
653
654 \renewenvironment{compactitem}[1][0cm]{%
655 \tpl@addmargin{#1}
656 \begin{oldcompactitem}
657 \iftpl@instepenv
658 \renewcommand{\item}{\tpl@origitem}%
659 \fi
660 }%
661 {\end{oldcompactitem}}
662 }{}
663 % \end{macrocode}
664
665 % \Finale
666 \endinput