Debian Codegraph @

texmf-dist/source/latex/testhyphens/testhyphens.dtx

raw
1 % \iffalse meta comment
2 % !TEX encoding = UTF-8 Unicode
3 % !TEX TS-program = lualatex
4
5 %<*internal>
6 \begingroup
7 \input docstrip.tex
8 \keepsilent
9 \preamble
10 Copyright 2025 Claudio Beccari All rights reserved.
11
12 This system is distributed in the hope that it will
13 be useful, but WITHOUT ANY WARRANTY; without even
14 the implied warranty of MERCHANTABILITY or FITNESS
15 FOR A PARTICULAR PURPOSE.
16
17 This file is distributed under the LPPL licence,
18 version 1.3c dated 2008-05-04 or later as it appears
19 in CTAN/macros/latex/base/lppl.tex.
20 See the end of this file.
21
22 \endpreamble
23 \askforoverwritefalse
24 %
25 \generateFile{testhyphens.sty}{f}{\from{testhyphens.dtx}{package}}
26
27 \def\tmpa{plain}
28 \ifx\tmpa\fmtname\endgroup\expandafter\bye\fi
29 \endgroup
30 %</internal>
31 % \fi
32 %
33 % \iffalse
34 %^^A The following trick uses the same date for every file header.
35 %<package>\NeedsTeXFormat{LaTeX2e}
36 %<*driver>
37 \ProvidesFile{testhyphens.dtx}[%
38 %</driver>
39 %<package>\ProvidesPackage{testhyphens}[%
40 %<*driver,package>
41 2025/01/16 v.1.0
42 %<package>Prints list of hyphenated words]
43 %</driver,package>
44 %<*driver>
45 ]
46 %</driver>
47 %<*driver>
48 \documentclass{ltxdoc}
49 \GetFileInfo{testhyphens.dtx}
50 \title{The \textsf{testhyphens} package\\[3mm]
51 {\Large Version number \fileversion, last
52 revised on \filedate.}}
53 \author{Claudio Beccari\\
54 email: claudio(dot)beccari(at)gmail(dot)com}
55 \date{}
56 \providecommand\babel{\pack{babel}}
57 \newcommand\lbr{\char123\relax}
58 \newcommand\rbr{\char125\relax}
59 %
60 \renewcommand*\meta[1]{{\normalfont\textlangle\textit{#1}\textrangle}}
61 \newcommand*\pack[1]{\textsf{#1}}
62 \newcommand*\prog[1]{\texttt{#1}}
63 \providecommand*\marg[1]{{\normalfont\texttt{\{}\meta{#1}\texttt{\}}}}\let\Arg\marg
64 \renewcommand*\oarg[1]{\texttt{[}\meta{#1}\texttt{]}}
65 \newcommand\amb[1]{\texttt{\itshape#1}}
66 \usepackage{multicol}
67 \usepackage{iftex}
68 %
69 \ifpdftex%
70 \usepackage[utf8]{inputenc}
71 \usepackage[LGR,T1]{fontenc}
72 \usepackage{lmodern,textcomp}
73 \usepackage[greek,italian,english]{babel}
74 \else
75 \usepackage{fontspec}
76 \usepackage{polyglossia}
77 \setotherlanguage[variant=mono]{greek}
78 \setmainlanguage{english}
79 \setotherlanguage{italian}
80 \usepackage[default]{fontsetup}
81 \fi
82
83 \usepackage{metalogo,FramedSyntax}
84 \usepackage{testhyphens}
85 %
86 \begin{document}
87 \maketitle
88 \DocInput{testhyphens.dtx}
89 \end{document}
90 %</driver>
91 % \fi
92 %
93 % \begin{abstract}
94 % This small file implements some code that was
95 % already published on TUGboat, but it is adapted
96 % to \LaTeX\ engines, and it is usable as a
97 % specific environment.
98 % It helps those \TeX{}ers who create hyphenation
99 % patterns, as well normal \LaTeX\ users, in order
100 % to test the correctness of the hyphenation points
101 % of words lists.
102 % It works with \pack{pdflatex}, \prog{xelatex}, and
103 % \prog{lualatex}.
104 % \end{abstract}
105 %
106 %{\columnseprule=0.4pt
107 %\begin{multicols}{2}
108 %\tableofcontents
109 %\end{multicols}}
110 %
111 % \section{Introduction}
112 %
113 % This small package introduces the environment
114 % |checkhyphens|. This environment may set the
115 % hyphenation parameters to any specific values,
116 % even different from those setup for the language
117 % in use; it processes a list of one or more space
118 % delimited words typesetting them one per line with
119 % hyphens between each syllable. If typesetting
120 % this list takes place within a \amb{multicolulmn}
121 % environment, it renders much easier to read long
122 % lists.
123 %
124 % The hyphenation patterns of a specific language
125 % to be tested, may be those of the default
126 % language before entering the environment, or can
127 % be those of another language specified with
128 % |\selectlanguage| within the environment.
129 %
130 % The environment \amb{checkhyphens} accepts also an
131 % optional argument to set the hyphenation
132 % parameters, and a body consisting of a list
133 % of one or more space separated words; if the
134 % user just pastes a text copied from somewhere that
135 % includes punctuation, the punctuation signs are
136 % ignored, but are not taken off from the printed
137 % list.
138 %
139 % The main code was published long ago by Victor
140 % Eijkout, in “The bag of tricks”, \textsf{\slshape
141 % TUGboat} 14.4 (1993), p. 424. He himself states
142 % that the code was created by Jonathan Kew; Victor
143 % Eijkout just added an empty
144 % |\discretionary{}{}{}|. The idea came to him from
145 % the code created by Oliver Schoett that is used
146 % for the hyphenation exception list of TUGboat.
147 % Credit for the code goes completely to the
148 % authors mentioned above; I just added some sugar
149 % to use that code in \LaTeX\ documents for the
150 % benefit of hyphenation pattern creators, and of
151 % regular users who want to know how a certain word
152 % or the words of a certain sentence would be
153 % hyphenated by \TeX\ and friends.
154 %
155 % In 2018 a small extension package \pack{xltxtra}
156 % by Will Robertson was added to the \TeX\ system
157 % distribution that contains some fixes and
158 % facilities to be used when typesetting with
159 % \XeLaTeX; it contains the definition of the macro
160 % \cs{showhyphens} macro; this macro was provided by
161 % Enrico Gregorio; it is supposed to show the
162 % hyphenation of a small word list when using
163 % \XeLaTeX; unfortunately in these years, up to
164 % 2024, \LaTeX\ has undergone so many changes that
165 % this macro does not work any more, except perhaps
166 % with few selected languages.
167 %
168 % Of course this package does not tell the whole
169 % truth: in facts \TeX\ and friends hyphenate words
170 % only when certain conditions are met; these
171 % conditions are stated in Appendix~H of the
172 % \TeX\-book, which is and remains the primary
173 % reference for understanding the hyphenation
174 % process used by \TeX\ and friends.
175
176 % Sometimes users complain that certain words
177 % are not hyphenated; users might use this package
178 % and find out how their words are hyphenated; then
179 % what's happening if they are not hyphenated the
180 % right way? Simply those conditions are not met.
181 % Therefore the full understanding of the above
182 % mentioned Appendix~H is fundamental before
183 % complaining about \TeX\ not working as expected
184 % with hyphenation and possibly before raising a bug
185 % notice.
186 %
187 % \section{Incompatibility with the previous
188 % version 0.5a}
189 %
190 % In 2015 I had to change some definitions within
191 % the body of this package in order to avoid
192 % clashes mainly with the |french| language option
193 % of babel; in facts that option declares most
194 % punctuation marks as active characters.
195 % Unfortunately those characters receive global
196 % definitions, therefore they remain active even
197 % when they should not perform any action.
198 %
199 % It is necessary to specify that the previous
200 % version used the colon as a parameter separator;
201 % while, in order to avoid conflicts with |french|,
202 % now the parameter separator is a simple hyphen.
203 %
204 % Defining active characters when using
205 % |polyglossia| may produce other incompatibilities
206 % that are easily circumvented by specifying
207 % languages in a different order. In facts, if you
208 % specify languages as such
209 %\begin{verbatim}
210 %\setmainlanguage[babelshorthands]{italian}
211 %\setotherlanguages{english,french}
212 %\end{verbatim}
213 % an error appears when |french| sets up its
214 % parameters for the UNICODE apostrophe: the cause
215 % of this error derives from the use of the
216 % |italian| option |babelshorthands|; of course if
217 % this option is not specified, no problems arise.
218 % But if you interchange the declarations as in
219 %\begin{verbatim}
220 %\setotherlanguages{english,french}
221 %\setmainlanguage[babelshorthands]{italian}
222 %\end{verbatim}
223 % no problems arise.
224 %
225 % \section{Changes from version 0.7}
226 %
227 % When version 0.7 was published, command
228 % \cs{testhyphens} worked regularly also with
229 % \XeLaTeX; this new version maintains the
230 % environment \amb{checkhyphens}, but lets down
231 % \cs{texthyphens} because this command raised
232 % errors that I was not able to repair. Something
233 % was changed in the \XeLaTeX\ format file that I
234 % could not spot.
235 %
236 % Never mind: in 2015 the environment was more
237 % effective than the command, and it survives in
238 % this new version with all its power.
239 %
240 % \section{Usage}
241 % This package has been tested with |pdflatex|,
242 % |xelatex|, and |lualatex|; for |lualatex| a
243 % package |showhyphens| exists that marks the hyphen
244 % points of an entire document with thin red
245 % vertical strokes at the possible break points.
246 % Users may use the package they prefer by taking
247 % into consideration their needs with respect with
248 % the features and the functionalities of package
249 % \pack{testhyphens} compared to those of
250 % \pack{showhyphens}.
251 %
252 % Notice that even normal Plain \TeX\ and \LaTeX\
253 % have available the command |\showhyphens| but,
254 % differently from this package, such command works
255 % only when the typesetting engine is |tex| or
256 % |pdftex|; moreover the result appears on the
257 % console window and in the \texttt{.log} file
258 % and it is not written down in the output document
259 % as a record that remains available to the user.
260 % This package |testhyphens|, on the opposite,
261 % prints the result in the output document and works
262 % with the typesetting engines |pdftex|, |xetex|,
263 % and |luatex| as expected.
264 %
265 % This simple package is loaded just with the usual
266 % statement
267 % \begin{flushleft}
268 %|\usepackage{testhyphens}|
269 % \end{flushleft}
270 %
271 % The package new version defines for the end user
272 % just the environment \amb{checkhyphens}: its
273 % syntax is the following:
274 %\begin{Sintassi}
275 % |\begin{checkhyphens}|\oarg{hyphenation parameters}
276 %\meta{space separated word list}
277 % |\end{checkhyphens}|
278 %\end{Sintassi}
279 % where \meta{hyphenation parameters} is a
280 % \emph{hyphen separated list} of two digits that in
281 % order will be locally assigned by the environment
282 % respectively to |\lefthyphenmin| and
283 % |\righthyphenmin|; the \meta{space separated word
284 % list} is self explanatory. Nevertheless it is good
285 % to remember that the environment isolates single
286 % words by using a space as a word separator; this
287 % requires that the list is preceded and followed
288 % by spaces or end of lines, Actually the initial
289 % and final spaces are necessary when the opening
290 % statement is on the same source line of the first
291 % word and the closing statement is in the same
292 % source line of the last word.
293 %
294 % \section[Hyphenation parameters]{Using hyphenation parameters}
295 %
296 % The hyphenation parameters are just
297 % |\lefthyphenmin| and |\righthyphenmin|; they
298 % represent the minimum number of characters that
299 % the first and, respectively, the last word
300 % fragment must have before or until hyphenation
301 % takes place; for example in English the default
302 % values are 2 and~3; in Italian the default values
303 % are 2 and~2; in Greek the default values are
304 % 1 and~1.
305 %
306 % Let us make an example: the word \emph{idea} is
307 % spelt the same in English and in Italian, although
308 % it is pronounced differently; but
309 % the word is not hyphenated at all in both
310 % languages. According to the Italian
311 % syllabification rules its grammatical word
312 % division is \emph{i-de-a}; in American English
313 % the grammatical word division is the same; in any
314 % case the initial and the terminal syllables are
315 % too short to comply with the above mentioned
316 % \TeX\ hyphenation parameters, and \TeX\ refrains
317 % from hyphenating this word. On the opposite, in
318 % Greek \foreignlanguage{greek}{ιδέα} is hyphenated
319 % by \TeX\ as \foreignlanguage{greek}{ι-δέ-α}.
320 %
321 % If you use \amb{checkhyphens} with the optional
322 % hyphenation parameters specified to 1 and~1 in
323 % Italian or in English, as in
324 %\begin{verbatim}
325 %\begin{checkhyphens}[1-1]
326 %idea
327 %\end{checkhyphens}
328 %\end{verbatim}
329 % you don't get any hyphenation in English; but in
330 % Italian hyphenation turns out to be \emph{i-de-a}
331 % as in Greek.
332 %
333 % This happens because the Italian patterns were
334 % created by hand and tested with parameters
335 % 1 and~1, even if for typesetting purposes the
336 % parameters are set to 2 and~2. In English the
337 % patterns were created by means of the
338 % \prog{patgen} program where parameters 2 and~3
339 % were set.
340 %
341 % Typographically speaking the values 1 and~1 for
342 % Italian are almost useless, but in certain
343 % difficult narrow-measure texts the user has the
344 % possibility to locally set the first and/or the
345 % second parameter to 1, and solve that particular
346 % instance of problematic narrow-measure
347 % typesetting.
348 %
349 % \section{Examples}
350 % Here we show some actual examples by using the
351 % \amb{checkhyphens} environment.
352 %
353 % While typesetting in English we might verify the
354 % hyphenation of some words.
355 % We set the source file with the following lines
356 % %\begin{verbatim}
357 %\begin{{chechhyphens}
358 %manifests instruments
359 %he analyses the samples and submits the analyses to the federal office
360 %\end{checkhyphens}
361 %\end{verbatim}
362 % The result produced by this package, typeset
363 % within a four-column \amb{multicols} environment,
364 % is the following:
365 %
366 %\begin{multicols}{4}
367 %\begin{checkhyphens}
368 %he analyses the samples and submits the analyses to the federal office
369 %\end{checkhyphens}
370 %\end{multicols}
371 % Notice the two instances of the word |analyses|;
372 % in English \TeX\ hyphenates them the same way, but
373 % one of the two words is hyphenated the wrong way;
374 % unfortunately there is no way for \TeX\ to
375 % distinguish homographic words that are not
376 % homophonic ones. In plain terms the verb
377 % “analyses” is stressed on the `y', while the noun
378 % “analyses” is stressed on the second `a';
379 % the standard phonetic hyphenation rules for
380 % English probably should hyphenate the verb as
381 % “an-a-lyses”, but \TeX\ works only on the spelling
382 % and not on the sound; furthermore it has no means
383 % to find out if a word plays the rôle of a noun or
384 % of a verb.
385 % In this and similar situations (for example: “the
386 % record” and “to record”) the user should
387 % check a good reliable dictionary and possibly
388 % insert an explicit discretionary hyphen~|\-|.
389 % A good although oldish such dictionary would be
390 % the \emph{Webster's New Word Speller divider} ---
391 % The 33\,000 most used words spelled and
392 % syllabified. World \& Collins World, (1971).
393 %
394 % In Italian any grammar book states the rules that
395 % are valid for all Latin derived words and are
396 % applicable also to technical scientific words,
397 % although a phonetic hyphenation is allowed and
398 % is more more adequate to the context; words
399 % derived from Greek (very common in medicine) and
400 % neologisms with foreign roots, do not find
401 % specific rules either in grammars and in most
402 % dictionaries; or better, if a word ends with one
403 % or more consonants, this consonantic group must
404 % not be separated from the word last vowel.
405 %
406 % While typesetting in Italian it is possible to
407 % insert into the source file a set of lines such as
408 % these:
409 %\begin{verbatim}
410 %\begin{checkhyphens}
411 %ebbe la bell’idea di viaggiare in scooter
412 %\end{checkhyphens}
413 %\end{verbatim}
414 % that produces the following result:
415 %\begin{multicols}{4}
416 %\begin{otherlanguage*}{italian}
417 %\begin{checkhyphens}
418 %ebbe la bell’idea di viaggiare in scooter
419 %\end{checkhyphens}
420 %\end{otherlanguage*}\end{multicols}
421 % Notice that “idea” cannot be hyphenated by \TeX\
422 % when it is an isolated word; but in Italian the
423 % apostrophe is used (also) to mark a vocalic
424 % elision, therefore for hyphenation purposes, even
425 % if it is not a letter, it is assigned a lowercase
426 % code, and it becomes part of a word, in
427 % our case the word string “bell'idea”. Therefore
428 % the patterns that involve the apostrophe produce
429 % the result shown above, where the first
430 % grammatical hyphen point shows up
431 % again\footnote{This is so with \prog{xelatex}; in
432 % \prog{lualatex} the apostrophe is not assigned a
433 % a lowercase code, therefore with
434 % \prog{lualatex} “bell'idea” is not hyphenated at
435 % all; it would be if the Unicode single upper
436 % quotation mark was used instead of the
437 % \textsc{ascii} character available with any
438 % keyboard: “bell’idea”. These characters look the
439 % same (at least with some OpenType fonts) but have
440 % different Unicode code points.}.
441 %
442 % While typesetting in Greek we might insert in the
443 % source file the following code:
444 %\begin{flushleft}\ttfamily\obeylines
445 %|\begin{checkhyphens}[1-1]|
446 %\begin{otherlanguage*}{greek}
447 % επεξεργάζεται αρχεία τα οποία περιέχουν τους
448 % χαρακτήρες που υπάρχουν στο πληκτρολόγιο του
449 % υπολογιστή σας
450 %\end{otherlanguage*}
451 %|\end{checkhyphens}|
452 %\end{flushleft}
453 %and we would get:
454 %\begin{multicols}{4}
455 %\begin{otherlanguage*}{greek}
456 %\begin{checkhyphens}[1-1]
457 %επεξεργάζεται αρχεία τα οποία περιέχουν τους χαρακτήρες που υπάρχουν
458 %στο πληκτρολόγιο του υπολογιστή σας
459 %\end{checkhyphens}
460 %\end{otherlanguage*}\end{multicols}
461 %\noindent while, had we set the hyphenation parameters different from the default
462 % values 1~and~1, as in:
463 %\begin{flushleft}\ttfamily\obeylines
464 %|\begin{checkhyphens}[2-2]|
465 %\begin{otherlanguage*}{greek}
466 %επεξεργάζεται αρχεία τα οποία περιέχουν τους
467 % χαρακτήρες που υπάρχουν στο πληκτρολόγιο του
468 % υπολογιστή σας
469 %\end{otherlanguage*}
470 %|\end{checkhyphens}|
471 %\end{flushleft}
472 %the result would be:
473 %\begin{multicols}{4}
474 %\begin{otherlanguage*}{greek}
475 %\begin{checkhyphens}[2-2]
476 %επεξεργάζεται αρχεία τα οποία περιέχουν τους χαρακτήρες που υπάρχουν
477 %στο πληκτρολόγιο του υπολογιστή σας
478 %\end{checkhyphens}
479 %\end{otherlanguage*}
480 %\end{multicols}
481 %
482 % The pattern files for monotonic Greek used in
483 % these examples were rebuilt with Greek letters --
484 % avoiding the Latin transliteration originally
485 % used with the Latin Modern conformant Greek fonts
486 % encoded with the \texttt{LGR} encoding; that was
487 % done for the benefit of non-Greek Hellenists who
488 % would use their Latin national keyboards. The
489 % above mentioned upgrading was done by Dimitrios
490 % Filippou in 2011; since then no modifications were
491 % added, except for the patterns to be used with
492 % \prog{xelatex} and \prog{lualatex}.
493 %
494 % For OpenType fonts Antonis Tsolomitis
495 % produced a new font set that assembles the Latin
496 % Modern Fonts together with the CBfonts and some
497 % Cyrillic ones and other fonts for several other
498 % scripts; this remarkable pretty complete
499 % OpenType font is named “New Computer Modern”
500 % (documentation with \texttt{texdoc NewCM}) that
501 % uses the \pack{fontsetup} package for selecting
502 % its varieties; this package is described by the
503 % same documentation. This guide was
504 % typeset with \ifxetex\prog{xelatex}\else
505 % \ifluatex\prog{lualatex}\fi\fi, using this new
506 % font, and the above Greek language examples are
507 % correct.
508 %
509 % The first Greek example shows very clearly the
510 % effect of |\lefthyphenmin=1| compared to the
511 % second example where |\lefthyphenmin=2|. On the
512 % other hand, the fact that some hyphen points may
513 % be missing is certainly a feature that precludes
514 % full hyphenation, but it does not produce
515 % hyphenation errors.
516 %
517 % By using this package it was originally possible
518 % to highlight the features/bugs in the Greek
519 % hyphenation patterns.
520 % \StopEventually{}
521 % \CheckSum{101}
522 % \section{The code}
523 %\iffalse
524 %<*package>
525 %\fi
526 % The following code has very few modifications
527 % compared to the original code published by Victor
528 % Eijkout. For my own benefit I changed the
529 % declaration name from |\printhyphens| to
530 % |\t@sthyphens|; with an at-sign internal name
531 % it is less likely that this command is
532 % redefined by some user. I also moved the command
533 % |\offinterlineskip| from its penultimate position
534 % in the original code to the first command to be
535 % executed within a |\vbox|; in this way
536 % I avoided certain cases in which the lack of
537 % interline skip would remain active after closing
538 % the environment.
539 %
540 % The code is based on treating the inter word space
541 % as an active character that plays different rôles
542 % according to its position; it lets the
543 % environment isolate the words to be hyphenated
544 % and open suitable boxes, that are closed at the
545 % moment of processing the following word; the
546 % |\everypar| token-list distinguishes the various
547 % actions to be performed at each step.
548 %
549 % Another advantage is that the environment
550 % processes one word at a time, therefore the word
551 % list may be arbitrarily long; while creating the
552 % patterns for the Albanian language I initially
553 % worked with a half dozen pages taken from a
554 % book, about 7000 words. Initially I deleted all
555 % duplicate words then, while fine tuning
556 % the pattern set, I deleted a certain number of the
557 % test words; eventually a good set of patterns
558 % was created under the supervision or a learned
559 % Albanian friend.
560 %
561 % But the trick of this software is to set each word
562 % within a vertical box where the measure (the text
563 % width |\hsize|) is zero; in this way each word is
564 % hyphenated at the first hyphen point, but the word
565 % fragment that remains in the following line is
566 % still too long and gets hyphenated again; the
567 % process is repeated again and again until the
568 % initial string is exhausted. The contents of the
569 % |\vbox|, that now contains the syllables one per
570 % line, is reassembled to form one line, and this
571 % line is output within an |\hbox| and is therefore
572 % the box typeset in vertical mode; this is why the
573 % dommand must be issued in vertical mode, so as
574 % to start processing the word list with the right
575 % foot; this is also why the word list must start
576 % and end with spaces; the first space or end of
577 % line before the first word opens the first box,
578 % and the last space or end of line after the last
579 % word closes the box and outputs its contents in
580 % horizontal mode..
581 % \begin{macrocode}
582 \def\t@sthyphens{%
583 \everypar{\setbox0\lastbox
584 \setbox1\hbox{\strut}\vbox\bgroup
585 \offinterlineskip
586 \everypar{\setbox0\lastbox \nobreak\hskip\z@}\dimen0=\hsize
587 \hsize=\z@ \hfuzz\maxdimen \def\par{\endgraf \hsize=\dimen0\getlastline
588 \egroup\endgraf}}\breakafterword
589 }
590
591 \def\breakafterword{%
592 \catcode`\^^M=13 \catcode`\ =13
593 }
594
595 {\breakafterword\gdef^^M{\par}\global\let ^^M}
596
597 \def\getlastline{\setbox0\lastbox
598 \ifvoid0
599 \let\next\nomorelines
600 \else
601 \unskip\unpenalty
602 \setbox1\hbox{\unhbox0\strut\discretionary{}{}{}%
603 \unhbox1}\let\next\getlastline
604 \fi
605 \next}
606
607 \def\nomorelines{\unhbox1}
608 % \end{macrocode}
609 % The above code is substantially the original one;
610 % where the internal declaration control
611 % sequence |\t@sthyphens| is defined.
612 % Now we define the \amb{checkhyphens} environment
613 % where we make sure that the whole process of the
614 % word list contained in its body takes place in
615 % vertical mode. In oder to process the optional
616 % argument for setting the hyphenation parameters,
617 % we define a delimited argument macro
618 % |\s@thyphenpars| that uses the \emph{hyphen} as
619 % the argument delimiter.
620 % \begin{macrocode}
621 \newenvironment{checkhyphens}[1][\lefthyphenmin-\righthyphenmin]{%
622 \@tempcnta=\lefthyphenmin
623 \@tempcntb=\righthyphenmin
624 \s@thyphenpars[#1]\par
625 \bgroup\t@sthyphens
626 }{%
627 \egroup\par
628 }
629
630 \def\s@thyphenpars[#1-#2]{%
631 \@tempcnta=#1\relax
632 \@tempcntb=#2\relax
633 \unless\ifnum\@tempcnta=\lefthyphenmin \lefthyphenmin=\@tempcnta\fi
634 \unless\ifnum\@tempcntb=\righthyphenmin \righthyphenmin=\@tempcntb\fi
635 }
636 % \end{macrocode}
637 %\Finale
638 %\iffalse
639 %</package>
640 %\fi
641 % That's all. Happy \TeX\-ing.
642 \endinput
643